Hyundai R500LC-7A Crawler Excavator Operator's Manual 2023 - PDF

CONTENTS Foreword - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0-1

6. Traveling of the machine - - - - - - - - - - - - - - - - - - - - - - - - - - 4-14

Before servicing this machine - - - - - - - - - - - - - - - - - - - - - - - - 0-2

7. Efficient working method - - - - - - - - - - - - - - - - - - - - - - - - - 4-17

EC regulation approved - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0-3

8. Operation in the special work sites - - - - - - - - - - 4-21

Table to enter S/No and distribution - - - - - - - - - - - - - - - 0-4

9. Normal operation of excavator - - - - - - - - - - - - - - - - 4-23

Safety labels - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0-5

10. Attachment lowering - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-24

Machine data plate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0-14

11. Storage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-25

Guide(Direction, S/No, Symbol) - - - - - - - - - - - - - - - - - - - - - 0-15

12. RCV lever operating pattern - - - - - - - - - - - - - - - - - - - - 4-27 13. Switching hydraulic attachment circuit - - - - - 4-28

SAFETY HINTS 1. Before operating the machine - - - - - - - - - - - - - - - - - 1-1

TRANSPORTATION

2. During operating the machine - - - - - - - - - - - - - - - - - 1-6

1. Preparation for transportation- - - - - - - - - - - - - - - - - - - 5-1

3. During maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-13

2. Dimension and weight - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-2

4. Parking - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-16

3. Disassembling for transportation- - - - - - - - - - - - - - 5-5 4. Loading the machine - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-8

SPECIFICATIONS

5. Fixing the machine - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-10

1. Major components - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-1

6. Loading and unloading by crane - - - - - - - - - - - - - 5-11

2. Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-2

7. Adjustable track gauge - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-12

3. Working range - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-5 4. Weight - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-8

MAINTENANCE

5. Lifting capacites - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-9

1. Instruction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-1

6. Bucket selection guide - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-13

2. Tightening torque - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-6

7. Undercarriage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-15

3. Fuel, coolant and lubricants - - - - - - - - - - - - - - - - - - - - - 6-9

8. Specification for major components - - - - - - - - 2-17

4. Maintenance check list - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-11

9. Recommended oils - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-21

5. Maintenance chart - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-16 6. Service instruction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-18

CONTROL DEVICES

7. Electrical system - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-40

1. Cab devices - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-1

8. Air conditioner and heater - - - - - - - - - - - - - - - - - - - - - - - 6-43

2. Cluster - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2 3. Switches - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-9

TROUBLESHOOTING GUIDE

4. Levers and pedals - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-13

1. Engine - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-1

5. Air conditioner and heater - - - - - - - - - - - - - - - - - - - - - - - 3-15

2. Electrical system - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-2

6. Others - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-18

3. Others - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

OPERATION

HYDRAULIC BREAKER

1. Suggestion for new machine - - - - - - - - - - - - - - - - - - - 4-1

1. Selecting hydraulic breaker - - - - - - - - - - - - - - - - - - - - - 8-1

2. Check before starting the engine - - - - - - - - - - - - 4-2

2. Circuit configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-2

3. Starting and stop the engine - - - - - - - - - - - - - - - - - - - 4-3

3. Maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-3

4. Mode selection system - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-6

4. Precaution while operating the breaker - - - 8-4

5. Operation of the working device - - - - - - - - - - - - - - 4-13

5. Quick clamp - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-6

INDEX - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-1

FOREWORD This manual contains a number of instructions and safety recommendations regarding driving, handling, lubrication, maintenance, inspection and adjustment of the excavator.

The manual is to promote safety maintenance and enhance machine performance.

Keep this manual handy and have all personnel read it periodically.

If you sell the machine, be sure to give this manual to the new owners.

This machine complies with EC directive "2006/42/EC".

1. Read and understand this manual before operating the machine.

This operator's manual may contain attachments and optional equipment that are not available in your area. Please consult your local Hyundai distributor for those items you require.

Improper operation and maintenance of this machine can be hazardous and could result in serious injury or death.

Some actions involved in operation and maintenance of the machine can cause a serious accident, if they are not done in a manner described in this manual.

The procedures and precautions given in this manual apply only to intended uses of the machine.

If you use your machine for any unintended uses that are not specifically prohibited, you must be sure that it is safe for you and others. In no event should you or others engage in prohibited uses of actions as described in this manual.

2. Inspect the jobsite and follow the safety recommendations in the safety hints section before operating the machine.

3. Use genuine Hyundai spare parts for the replacement of parts.

We expressly point out that Hyundai will not accept any responsibility for defects resulting from nongenuine parts or non workmanlike repair.

In such cases Hyundai cannot assume liability for any damage.

Continuing improvements in the design of this machine can lead to changes in detail which may not be reflected in this manual. Consult Hyundai or your Hyundai distributor for the latest available information for your machine or for questions regarding information in this manual.

0-1

BEFORE SERVICING THIS MACHINE It is the responsibility of the owner and all service and maintenance personnel to avoid accidents and serious injury by keeping this machine properly maintained.

It also is the responsibility of the owner and all service and maintenance personnel to avoid accidents and serious injury while servicing the machine.

No one should service or attempt to repair this machine without proper training and supervision.

All service and maintenance personnel should be thoroughly familiar with the procedures and precautions contained in this manual.

All personnel also must be aware of any federal, state, provincial or local laws or regulations covering the use and service of construction equipment.

The procedures in this manual do not supersede any requirements imposed by federal, state, provincial or local laws.

Hyundai can not anticipate every possible circumstance or environment in which this machine may be used and serviced.

All personnel must remain alert to potential hazards.

Work within your level of training and skill.

Ask your supervisor if you are uncertain about a particular task. Do not try to do too much too fast.

Use your common sense.

0-2

EC REGULATION APPROVED · Noise level (EN474-1 : 2006 and 2000/14/EC) are as followings.

LWA : 106dB(EU only) LPA : 76dB

· The value of vibrations transmitted by the operator's seat are lower than standard value of (EN474-1 : 2006 and 2002/44/EC).

0-3

TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR

Machine Serial No. Engine Serial No. Manufacturing year Manufacturer

Hyundai Heavy Industries co., Ltd.

Address

1000, Bangeojinsunhwan-doro, Dong-Ku, Ulsan 682-792, Korea

Distributor for U.S.A

Hyundai Heavy Industries U.S.A, Inc

Address

6100 Atlantic Boulevard Norcross GA 30071 U.S.A

Distributor for Europe

Hyundai Heavy Industries Europe N. V.

Address

Vossendal 11 2240 Geel Belgium

Dealer Address

0-4

SAFETY LABELS 1. LOCATION Always keep these labels clean. If they are lost or damaged, attach them again or replace them with a new label.

17

41

4

33

2

8

9

24

33

91N6-01131

91N6-03140 91N6-03111

38

16270-6N19

91N6-01111

91N6-04122

91N6-04122

91N6-04132

10

32 16

15

3 7

40

31

18

1

14

13

40

6

91N6-03130

42 30

91N6-07102

43

91N6-03121

91N6-03130 91N6-07112

91N6-07112

91N6-22

91N6-06120

34 91N6-05110

28,29

91N6-05110

11 12 35

22

23

19

20 26

37

39

91N6-07280

27 21

25

DOOR-LH

5

CONSOLE BOX-LH

44

45

BATTERY COVER

LOWER FRAME 5007A1FW01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Air cleaner filter Turbo charger cover Radiator cap Fueling Battery accident Reduction gear grease Hydraulic oil level Hydraulic oil lub Keep clear distance Lifting eye Name plate Slinging ideogram Side keep clear Stay fix Shearing-engine hood

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

No step-engine hood Transporting Low emission engine Control ideogram Control ideogram(LH) Control ideogram(RH) Ref operator manual-cab, RH pillar Safety-front window Alternate exit Air conditioner filter Console box tilting Safety lever Model name(LH) Model name(RH) Logo(ROBEX) 0-5

31 32 33 34 35 37 38 39 40 41 42 43 44 45

Trade mark(Boom) Trade mark(CWT) Keep clear-work area Noise level LWA Service instruction Lifting chart Step tread Hammer High pressure hose Falling Keep clear-boom/arm FOPS FOG plate ECU connector Tie

2. DESCRIPTION There are several specific warning labels on this machine please become familiarized with all warning labels.

Replace any safety label that is damaged, or missing.

1) AIR CLEANER FILTER(Item 1) This warning label is positioned on the air cleaner cover. ※ Periodic and proper inspection, cleaning and change of elements prolong engine life time and maintain the good performance of engine.

21070FW01

2) TURBO CHARGER COVER(Item 2) This warning label is positioned on the turbo charger cover.

Do not touch turbo charger or it may cause severe burn.

21070FW02

3) RADIATOR CAP(Item 3) This warning label is positioned on the radiator.

Never open the filler cap while engine running or at high coolant temperature.

14070FW03

4) FUELING(Item 4) This warning label is positioned on the right side of fuel filler neck.

Stop the engine when refueling. All lights or flames shall be kept at a safe distance while refueling.

STOP

21070FW04

0-6

5) BATTERY ACCIDENT(Item 5) This warning label is positioned on the battery cover.

Electrolyte containing sulfuric acid cause severe burns. Avoid being in contact with skin, eyes or clothes. In the event of accident flush with sufficient water, call a physician immediately. ※ Maintain the electrolyte at the recommended level. Add distilled water to the battery only when starting up, never when shutting down.

With electrolyte at proper level, less space may cause the gases to be accumulated in the battery.

36070FW05

Extinguish all smoking materials and open flames before checking the battery.

Do not use matches, lighters or torches as a light source near the battery for the probable presence of explosive gas.

Do not allow unauthorized personnel to change the battery or to use booster cables.

For safety from electric shock, do not battery terminals with a wet hand.

6) REDUCTION GEAR GREASE(Item 6) This warning label is positioned in the front of upper frame.

Grease is under high pressure.

Grease coming out of the grease plug under pressure can penetrate the body causing injury or death.

21070FW35

7) HYDRAULIC OIL LEVEL(Item 7) This warning label is positioned on the left side of hydraulic oil level.

Place the bucket on the ground whenever servicing the hydraulic system. ※ Check oil level on the level gauge. ※ Refill the recommended hydraulic oil up to specified level if necessary.

STOP

21070FW07

0-7

8) HYDRAULIC OIL LUBRICATION(Item 8) This warning label is positioned on the right side of air breather. ※ Do not mix with different brand oils.

Never open the filler cap while engine running or at high hydraulic oil temperature.

Loosen the cap slowly and release internal pressure completely.

14070FW08

9) KEEP CLEAR(Item 9) This warning label is positioned on the counterweight.

To prevent serious personal injury or death keep clear of machine swing radius.

Do not deface or remove this label from the machine.

21070FW09

10) LIFTING EYE(Item 10) This warning label is positioned on the counterweight.

Do not lift the machine by using lifting eyes on the counterweight or the lifting eyes may be subject to overload causing its breaking and possible personal injury. ※ See page 5-7 for proper lifting method of the machine.

21070FW10

0-8

11) SIDE KEEP CLEAR(Item 13) This warning label is positioned on the side of counterweight.

To prevent serious personal injury or death keep clear of machine swing radius.

Do not deface or remove this label from the machine.

21070FW13

12) STAY FIX(Item 14) This warning label is positioned on the side cover.

Be sure to support the stay when the door needs to be opened.

Be careful that the opened door may be closed by the external or natural force like strong wind.

21070FW14

13) SHEARING-ENGINE HOOD(Item 15) This warning label is positioned on the engine hood.

Do not open the engine hood during the engine's running.

Do not touch exhaust pipe or it may cause severe burn.

21070FW15

0-9

14) NO STEP-ENGINE HOOD(Item 16) This warning label is positioned on the engine hood.

Do not step on the engine hood.

21070FW16

15) TRANSPORTING(Item 17) This warning label is positioned right side of upper frame.

Study the operator's manual before transporting the machine, if provided and tie down arm and track to the carrier with lashing wire. ※ See page 5-9 for details.

14070FW17

16) CONTROL IDEOGRAM(Item 19) This warning label is positioned in right window of the cab.

Check the machine control pattern for conformance to pattern on this label. If not, change label to match pattern before operating machine.

Failure to do so could result in injury or death. ※ See page 4-13 for details.

36070FW19

17) CONTROL IDEOGRAM-LH(Item 20) This warning label is positioned on the LH console box.

Check the machine control pattern for conformance to pattern on this label. If not, change label to match pattern before operating machine.

Failure to do so could result in injury or death. ※ See page 4-13 for details.

36070FW20

0-10

18) CONTROL IDEOGRAM-RH(Item 21) This warning label is positioned on the RH console box.

Check the machine control pattern for conformance to pattern on this label. If not, change label to match pattern before operating machine.

Failure to do so could result in injury or death. ※ See page 4-13 for details.

21070FW21

19) REF OPERATOR MANUAL(Item 22) This warning label is positioned on the right side frame of the cab.

Study the operator's manual before starting and operating machine.

21070FW22

20) MAX HEIGHT(Item 22) This warning label is positioned on the right side frame of the cab.

Serious injury or death can result from contact with electric lines.

An electric shock being received by merely coming into the vicinity of an electric lines, the minimum distance should be kept considering the supply voltage as page 1-7.

36070FW23

21) INTERFERENCE(Item 22) This warning label is positioned on the right side frame of cab.

Be careful to operate machine equipped with quick clamp or extensions.

Bucket may hit cab or boom, boom cylinders when it reached vicinity of them.

14070FW62

0-11

22) SAFETY-FRONT WINDOW(Item 23) This warning label is positioned on the both side frame of the cab.

Be careful that the front window may be promptly closed.

21070FW24

23) ALTERNATE EXIT(Item 24) This warning label is positioned on the inside of rear window. ※ The rear window serves us an alternate exit. ※ To remove rear window, pull the ring and push out the glass.

21070FW25

24) AIR CONDITIONER FILTER(Item 25) This warning label is positioned on the air conditioner cover. ※ Periodic and proper inspection, cleaning and change of filter prolong air conditioner life time and maintain good performance.

21070FW26

25) CONSOLE BOX TILTING(Item 26) This warning label is positioned on the LH console box. ※ Before you get off the machine be sure to tilt the LH console box.

21070FW27

0-12

26) SAFETY LEVER(Item 27) This warning label is positioned on the cover safety.

Before you get off the machine be sure to place the safety lever LOCKED position.

21070FW28

27) KEEP CLEAR-WORK AREA(Item 33) This warning label is positioned on the counterweight.

To prevent serious personal injury or death keep clear of machine swing radius.

Do not deface or remove this label from the machine.

21070FW34

28) ECU CONNECTOR(Item 44) This warning label is positioned on the battery cover.

Before carrying out any electric welding on this machine.

Pull the connectors out of all electronic control units.

Connect the ground lead of the welding equipment as close to the welding point as possible. ※ See page 6-42 for details.

WARNING ·Before carrying out any electric welding on this machine - Pull the connectors out of all electronic control units.

- Connect the ground lead of the welding equipment as close to the welding point as possible. · Read the instructions in operator's manual for details.

7807AFW20

29) TIE(Item 45) This warning label is positioned on the lower frame.

Make sure no personnel are standing close to the tow rope ※ See page 4-16 for detail.

4507A0FW02

0-13

MACHINE DATA PLATE

1000, BANGEOJINSUNHWAN-DORO, DONG-GU, ULSAN 682-792, KOREA

1000, BANGEOJINSUNHWAN-DORO, DONG-GU, ULSAN 682-792, KOREA

EQUIPMENT

OPERATING WEIGHT

4

1 MODEL

5

MODEL

ENGINE POWER(PS/KW/rpm)

SERIAL-NUMBER

MFG. YEAR

4

2

SERIAL-NUMBER

3

OPERATING WEIGHT

1

ENGINE POWER(PS/KW/rpm)

2

EQUIPMENT

5 6

3 DO NOT DEFACE OR REMOVE THIS PLATE

DO NOT DEFACE OR REMOVE THIS PLATE

FOR EU ONLY 21090FW10

1 2

Equipment Model name

3 4

Serial number Operating weight

5 6

Engine power Manufacturing year

ö The machine serial number assigned to this particular machine and should be used when requesting information or ordering service parts for this machine from your authorized HYUNDAI dealer. The machine serial number is also stamped on the frame.

0-14

GUIDE 1. DIRECTION Forward

The direction of this manual indicate forward, backward, right and left on the standard of operator when the travel motor is in the rear and machine is on the traveling direction.

Left

Right

Travel motor Backward 50071FW00

2. SERIAL NUMBER Inform following when you order parts or the machine is out of order.

1) MACHINE SERIAL NUMBER The numbers are located below in right of the operator's cab.

Machine serial No. 21070SN02

2) ENGINE SERIAL NUMBER The numbers are located on the engine name plate.

45070FW01

3. SYMBOLS Important safety hint.

It indicates matters which can cause the great loss on the machine or the surroundings. ※ It indicates the useful information for operator.

0-15

SAFETY HINTS 1. BEFORE OPERATING THE MACHINE Think-safety first.

In special situation, wear protective clothing including a safety helmet, safety shoes, gloves, safety glasses and ear protection as required by the job condition.

Almost every accident are caused by disregarding the simple and fundamental safety hints.

13031SH01

Be sure to understand thoroughly all about the operator's manual before operating the machine.

Proper care is your responsibility.

13031SH02

Fully understand the details and process of the construction before starting the work.

If you find anything dangerous on the job, consult with the job supervisor for the preventive measures before operating the machine.

13031SH03

Do not operate when tired, or after drinking alcoholic beverages, or any type of drugs.

13031SH05

1-1

Check daily according to the operation manual.

Repair the damaged parts and tighten the loosened bolts.

13031SH05

Check for leakage of engine oil, hydraulic oil, fuel and coolant.

Keep machine clean, clean machine regularly.

13031SH06

Do not operate the machine if it requires repairs.

Operate after complete repair.

13031SH07

Be prepared if a fire starts.

Keep a fire extinguisher handy and emergency numbers for a fire department near your telephone.

13031SH08

1-2

PROTECTION AGAINST FALLING OR FLYING OBJECTS If there is any danger of falling or flying objects hitting the operator, install protective guards in place to protect the operator as required for each particular situation.

Be sure to close the front window before commencing work.

Make sure to keep all persons other than operator outside the range of falling or flying objects.

In case you need top guard, front guard and FOPS(Falling object protective structure), please contact Hyundai distributor in Europe.

14071SH01

UNAUTHORIZED MODIFICATION Any modification made without authorization from Hyundai can create hazards.

Before making a modification, consult your Hyundai distributor. Hyundai will not be responsible for any injury or damage caused by any unauthorized modification.

PREPARE FOR EMERGENCY Extinguisher

Only in case of emergency, use the installed hammer for breaking the windshield of the cab, and then exit carefully.

Have a fire extinguisher and first aid kit ready for emergencies such as fires or accidents.

Learn how to use the fire extinguisher.

Be sure you know the phone numbers of persons you should contact in case of an emergency.

Hammer 29071SH02

1-3

ROTATING BEACON

Beacon

When you operate a machine on a road or beside a road, a rotating beacon is required to avoid any traffic accident.

Please contact your Hyundai distributor to install it.

21071SH03

PRECAUTIONS FOR ATTACHMENTS When installing and using an optional attachment, read the instruction manual for the attachment and the information related to attachments in this manual.

Do not use attachments that are not authorized

by Hyundai or your Hyundai distributor. Use of unauthorized attachments could create a safety problem and adversely affect the proper operation and useful life of the machine.

Any injuries, accidents, product failures resulting from the use of unauthorized attachments will not the responsibility of Hyundai.

SAFETY RULES Only trained and authorized personnel can operate and maintain the machine.

Follow all safety rules, precautions and instructions when operating or performing maintenance on the machine.

When working with another operator or a person on worksite traffic duty, be sure all personnel understand all hand signals that are to be used.

1-4

SAFETY FEATURES Be sure all guards and covers are in their proper position. Have guards and covers repaired if damaged.

Use safety features such as safety lock and seat belts properly.

Never remove any safety features. Always keep them in good operating condition.

Improper use of safety features could result in serious bodily injury or death.

MACHINE CONTROL PATTERN Check machine control pattern for conformance to pattern on label in cab.

If not, change label to match pattern before operating machine.

Failure to do so could result in injury.

CALIFORNIA PROPOSITION 65 Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects and other reproductive harm.

This product contains or emits chemicals known to the State of California to cause cancer or birth

WASH HANDS AFTER HANDLING !

defects or other reproductive harm.

Battery posts, terminals and related accessories

: Battery posts, terminals and related accessories contain lead and lead compounds,chemicals known to the State of California to cause cancer and reproductive harm.

contain lead and lead compounds.

WASH HANDS AFTER HANDLING

13031SH55

Do not load the machine with the lifting eyes on the counterweight.

The wrong loading method can result in serious bodily injury or death.

1-5

2. DURING OPERATING THE MACHINE Use the handle and footstep when getting on or off the machine.

Do not jump on or off the machine.

13031SH09

Sound the horn to warn nearby personnel before operating the machine.

Remove all the obstacles like frost on the window before operating the machine for the good visibility.

13031SH10

Operate carefully to make sure all personnel or obstacles are clear within the working range of the machine.

Place safety guards if necessary.

13031SH11

When using the work equipment, pay attention to job site.

13031SH12

1-6

Provide proper ventilation when operating engine in a closed area to avoid the danger of exhaust gases.

13031SH13

Check the locations of underground gas pipes or water line and secure the safety before operation.

13031SH14

The operating near the electrical lines is very dangerous.

Operate within safe working range permitted as below.

Supply voltage

Min safe separation

6.6kV

3m(10ft)

33.0kV

4m(13ft)

66.0kV

5m(16ft)

154.0kV

8m(26ft)

275.0kV

10m(33ft)

13031SH15

If the machine touches the electric power lines, keep sitting on the operator's seat and make sure the personnel on the ground not to touch the machine until turning off the electric current.

Jump off the machine do not contact the machine when you need to get off.

13031SH16

1-7

Watch out for obstacles.

Be particularly careful to check the machine clearance during the swing.

13031SH17

When using the machine as breaker or working in a place where stones may fall down, cab roof guard and head guard should be provided for proper protection.

13031SH18

Avoid operating on a cliff or soft ground as there is danger of rolling over.

Make to get off easily as keeping the track at a right angle and putting the travel motor into the backward position when working on a cliff or soft ground inevitably.

13031SH19

Operate for the lifting work considering the capacity of machine, weight and width of the load.

Be careful not to lift exceeding the machine capacity as it can be the cause of machine damage and safety accident.

13031SH20

1-8

The operation on a slope is dangerous.

Avoid operating the machine on a slope of over 10 degree.

13031SH21

Operate the machine after making ground flat when operation is required on a slope.

13031SH22

The swing on the slope can be danger of rolling over.

Do not operate to swing the machine with the bucket loaded on a slope since the machine may lose its balance under such an instance.

13031SH23

Avoid parking and stopping on a slope.

Lower the bucket to the ground and block the track when parking.

13031SH24

1-9

Avoid traveling in a cross direction on a slope as it can cause the danger of rolling over and sliding.

13031SH25

Traveling on a slope is dangerous.

Be sure to operate slowly when traveling down a slope and maintain the bucket at a height of 20~30cm(1ft) above the ground so that it can be used as brake in an emergency.

20~30cm

13031SH26

Steering of the machine while traveling on a slope is dangerous.

When an inevitable turning of direction is required, turn on the flat and solid ground.

13031SH27

The engine angularity limits are 35 degree.

Do not operate by more than the engine limits in any case.

35。

13031SH28

1-10

Before traveling the machine, sound the horn to warn nearby personnel.

Operate forward and backward correctly with confirming the location of the travel motor.

13031SH29

Slow down when traveling through obstacles or uneven ground.

13031SH30

When working on soft ground, place mats or wood boards on the ground to prevent the machine sinking.

13031SH31

When operating in water or when crossing shallow, check the bed soil condition and depth and flow speed of water, then proceed taking care that water is not above carrier roller.

13031SH32

1-11

Do not retract the track gauge except transporting purpose.

50007SH50

MOUNTING AND DISMOUNTING Never jump on or off the machine. Never get on or off a moving machine.

When mounting or dismounting, always face the machine and use the handrails, machine or track frame steps, and track shoes. Additional track frame step can be fitted for wider optional shoe. In this case please contact your Hyundai distributor.

Do not hold any control levers when getting on or off the machine.

Ensure safety by always maintaining at least three-point contact of hands and feet with the handrails, steps or track shoes.

Always remove any oil or mud from the handrails, steps and track shoes. If they are damaged, repair them and tighten any loose bolts.

If grasping the door handrail when mounting or dismounting or moving on the track, open and lock the door securely in the open position.

Otherwise, the door may move suddenly, causing you to lose balance and fall.

29071FW06

1-12

3. DURING MAINTENANCE Stop the engine immediately when the trouble of the machine is found.

Inspect immediately the cause of trouble such as vibration, overheating and trouble in the cluster then repair.

13031SH33

Park on a flat place and stop the engine for inspecting and repairing. Properly TAG machine is not operational. (Remove start key) Extreme care shall be taken during maintenance work. Parts may require additional safe guard.

ON THE INSPECTION

13031SH34

Do not remove the radiator cap from hot engine.

Open the cap after the engine cools, below 50。 C(112。 F) to prevent personal injury from heated coolant spray or steam.

13031SH35

Do not work below the machine.

Be sure to work with proper safety supports.

Do not depend on the hydraulic cylinders to hold up the equipment and attachment.

13031SH36

1-13

There is the danger of fire in fuel and oil.

Store in cool dry area, away from any open flames.

13031SH37

Do not touch exhaust pipe, or may cause severe burn.

13031SH38

Do not open the engine hood and covers during the engine is running.

13031SH39

Be careful of not hitting the edges when you service engine.

13031SH40

1-14

Be careful that the front window may be promptly closed.

Be sure to support stay, when the side door needs to be opened.

Be careful that the open side door may closed by the external or national force like strong wind.

13031SH41

The antislip protection should be replaced if they have become worn or have been printed over.

13031SH42

Be careful of not touching slip, fall down etc., when you work at the upper frame to service engine and/or other component.

13031SH43

HIGH PRESSURE GAS Contain high pressure gas.

To avoid explosion and personal injury, do not expose to fire, do not weld, do not drill.

Relieve pressure before discharging.

45071SH03

LIFT EYES CAN FAIL Lift eyes or tank can fail when lifting tank containing fluids resulting in possible personal injury.

Drain tank of all fluids before lifting.

1-15

4. PARKING When leaving the machine after parking, lower the bucket to the ground completely and put the safety lever at parking position then remove the key.

Lock the cab door.

13031SH44

Park the machine in the flat and safe place.

P

13031SH45

Hope you can work easily and safely observing safety rules.

For safe operation, observe all safety rules.

13031SH46

1-16

SPECIFICATIONS 1. MAJOR COMPONENT

Fuel tank

Tool box

Hydraulic oil tank

Main pump

Engine Radiator

Arm

Bucket

Turning joint

Arm cylinder

Boom

Swing motor

Boom cylinder

Main control valve

Cab

Precleaner

Battery

Oil cooler

Muffler

91N6-05110

Tooth

91N6-05110

Bucket cylinder

Connecting link

Side cutter

Idler

Connecting rod

Carrier roller Track roller

Sprocket

Track

Counterweight

Travel motor

5007A2SP00

2-1

2. SPECIFICATIONS ·7.06m(23' 2") BOOM, 3.38m(11' 1")ARM I(I')

91N6-05110

E

H

91N6-05110

F

G

C

D

J

M

K

N

A

B(L) 5007A2SP02

Description

Unit

Specification

Operating weight

kg(lb)

48800(107580)

Bucket capacity(SAE heaped), standard

m (yd )

2.15(2.81)

3

3

Overall length

A

12030(39' 6")

Overall width, with 600mm shoe (Transport position/Working position)

B

2990/3540(9'10"/11'7")

Overall height

C

3850(12' 8")

Superstructure width

D

2980( 9' 9")

Overall height of cab

E

3390(11' 2")

Ground clearance of counterweight

F

1500( 4'11")

Engine cover height

G

Minimum ground clearance

H

770( 2' 6")

Rear-end distance

I

3665(12' 0")

Rear-end swing radius

I'

3720(12' 2")

Distance between tumblers

J

4470(14' 8")

Undercarriage length

K

5460(17'11")

Undercarriage width (Transport position/Working position)

L

2980/3540(9' 9"/11' 7")

Track gauge (Transport position/Working position)

M

2380/2940( 7'10"/ 9' 8')

Track shoe width, standard

N

600(24")

mm(ft-in)

3015( 9'11")

km/hr(mph)

3.2/5.0(2.0/3.1)

Swing speed

rpm

10.0

Gradeability

Degree(%)

35(70)

Ground pressure(600mm shoe)

kgf/cm (psi)

0.84(11.94)

Travel speed(Low/high)

2

2-2

·6.55m(21' 6") BOOM, 2.4m(7' 10")ARM I(I')

91N6-05110

E

H

91N6-05110

F

G

C

D

J

M

K

N

A

B(L) 5007A2SP02

Description

Unit

Specification

Operating weight

kg(lb)

48570(107100)

Bucket capacity(SAE heaped), standard

m (yd )

2.15(2.81)

3

3

Overall length

A

11750(38' 7")

Overall width, with 600mm shoe (Transport position/Working position)

B

2990/3540(9'10"/11'7")

Overall height

C

4100(13' 5")

Superstructure width

D

2980( 9' 9")

Overall height of cab

E

3390(11' 2")

Ground clearance of counterweight

F

1500( 4'11")

Engine cover height

G

Minimum ground clearance

H

770( 2' 6")

Rear-end distance

I

3665(12' 0")

Rear-end swing radius

I'

3720(12' 2")

Distance between tumblers

J

4470(14' 8")

Undercarriage length

K

5460(17'11")

Undercarriage width (Transport position/Working position)

L

2980/3540(9' 9"/11' 7")

Track gauge (Transport position/Working position)

M

2380/2940( 7'10"/ 9' 8')

Track shoe width, standard

N

600(24")

mm(ft-in)

3015( 9'11")

km/hr(mph)

3.2/5.0(2.0/3.1)

Swing speed

rpm

9.0

Gradeability

Degree(%)

35(70)

Ground pressure(600mm shoe)

kgf/cm (psi)

0.84(11.94)

Travel speed(Low/high)

2

2-3

·9.00m(29' 6") BOOM, 5.85m(19' 2")ARM I(I')

91N6-05110

E

H

91N6-05110

F

G

C

D

J

M

K

N

A

B(L) 5007A2SP02

Description

Unit

Specification

Operating weight

kg(lb)

50180(110600)

Bucket capacity(SAE heaped), standard

m (yd )

2.15(2.81)

3

3

Overall length

A

13770(45' 2")

Overall width, with 600mm shoe (Transport position/Working position)

B

2990/3540(9'10"/11'7")

Overall height

C

5190(17' 0")

Superstructure width

D

2980( 9' 9")

Overall height of cab

E

3390(11' 2")

Ground clearance of counterweight

F

1500( 4'11")

Engine cover height

G

Minimum ground clearance

H

770( 2' 6")

Rear-end distance

I

3665(12' 0")

Rear-end swing radius

I'

3720(12' 2")

Distance between tumblers

J

4470(14' 8")

Undercarriage length

K

5460(17'11")

Undercarriage width (Transport position/Working position)

L

2980/3540(9' 9"/11' 7")

Track gauge (Transport position/Working position)

M

2380/2940( 7'10"/ 9' 8')

Track shoe width, standard

N

600(24")

mm(ft-in)

3015( 9'11")

km/hr(mph)

3.2/5.0(2.0/3.1)

Swing speed

rpm

9.0

Gradeability

Degree(%)

35(70)

Ground pressure(600mm shoe)

kgf/cm (psi)

0.84(11.94)

Travel speed(Low/high)

2

2-4

3. WORKING RANGE ·7.06m(23' 2") BOOM A A'

B B' C

E

D

F

8ft

500072SP04

2.40m(7'10") Arm 2.90m(9' 6") Arm 3.38m(11' 1") Arm 4.00m(13' 1") Arm 4.50m(14' 9") Arm

Description Max digging reach

A

11140mm (36' 7") 11530mm (37'10") 12080mm (39' 8") 12640mm (41' 6") 13130mm (43' 1")

Max digging reach on ground

A'

10890mm (35' 9") 11290mm (37' 0") 11840mm (38'10") 12420mm (40' 9") 12910mm (42' 4")

Max digging depth

B

6610mm (21' 8")

7110mm (23' 4")

7590mm (24'11") 8210mm (26'11") 8710mm (28' 7")

Max digging depth (8ft level)

B'

6430mm (21' 1")

6940mm (22' 9")

7440mm (24' 5")

8080mm (26' 6")

8590mm (28' 2")

Max vertical wall digging depth

C

4880mm (16' 0")

4780mm (15' 8")

5470mm (17'11") 5980mm (19' 7")

6480mm (21' 3")

Max digging height

D

10640mm (34'11") 10610mm (34'10") 11080mm (36' 4") 11290mm (37' 0") 11550mm (37'11")

Max dumping height

E

7290mm (23'11") 7350mm (24' 1")

7760mm (25' 6")

7980mm (26' 2")

8230mm (27' 0")

Min swing radius

F

5110mm (16' 9")

4910mm (16' 1")

4830mm (15'10") 4910mm (16' 1")

4960mm (16' 3")

247.1[269.6] kN

251.1[273.9] kN

253.0[276.0] kN

253.0[276.0] kN

253.0[276.0] kN

SAE 25200[27490] kgf 25600[27930] kgf 25800[28150] kgf 25800[28150] kgf 25800[28150] kgf Bucket digging force

55560[60610] lbf 56440[61570] lbf 56880[62050] lbf 56880[62050] lbf 56880[62050] lbf 286.4[312.4] kN

290.3[316.7] kN

292.2[318.8] kN

292.2[318.8] kN

292.2[318.8] kN

ISO 29200[31850] kgf 29600[32290] kgf 29800[32510] kgf 29800[32510] kgf 29800[32510] kgf 64370[70220] lbf 65260[71190] lbf 65700[71670] lbf 65700[71670] lbf 65700[71670] lbf 278.5[303.8] kN

225.6[246.1] kN

192.2[209.7] kN

171.6[187.2] kN

159.9[174.4] kN

SAE 28400[30980] kgf 23000[25090] kgf 19600[21380] kgf 17500[19090] kgf 16300[17780] kgf Arm crowd force

62610[68300] lbf 50710[55320] lbf 43210[47140] lbf 38580[42090] lbf 35940[39210] lbf 291.3[317.7] kN

235.4[256.8] kN

200.1[218.2] kN

177.5[193.6] kN

164.8[179.7] kN

ISO 29700[32400] kgf 24000[26180] kgf 20400[22250] kgf 18100[19750] kgf 16800[18330] kgf 65480[71430] lbf 52910[57720] lbf 44970[49060] lbf 39900[43530] lbf 37040[40410] lbf

[ ] : Power boost

2-5

·6.55m(21' 6") BOOM

A A'

B B' C

E

D

F

8ft 500072SP04

Description

2.40m(7' 10") Arm

Max digging reach

A

10590mm (34' 9")

Max digging reach on ground

A'

10320mm (33'10")

Max digging depth

B

6130mm (20' 1")

Max digging depth (8ft level)

B'

5950mm (19' 6")

Max vertical wall digging depth

C

4390mm (14' 5")

Max digging height

D

10260mm (33' 8")

Max dumping height

E

6920mm (22' 8")

Min swing radius

F

4650mm (15' 3") 247.1[269.6] kN

SAE

25200[27490] kgf 55560[60610] lbf

Bucket digging force

286.4[312.4] kN ISO

29200[31850] kgf 64370[70220] lbf 278.5[303.8] kN

SAE

28400[30980] kgf 62610[68300] lbf

Arm crowd force

291.3[317.7] kN ISO

29700[32400] kgf 65480[71430] lbf

[ ] : Power boost

2-6

·9.00m(29' 6") BOOM

A A'

B B' C

E

D

F

8ft 500072SP04

Description

5.85m(19' 2") Arm

Max digging reach

A

16280mm (53' 5")

Max digging reach on ground

A'

16100mm (52'10")

Max digging depth

B

11380mm (37' 4")

Max digging depth (8ft level)

B'

11280mm (37' 0")

Max vertical wall digging depth

C

10070mm (33' 0")

Max digging height

D

13930mm (45' 8")

Max dumping height

E

10530mm (34' 7")

Min swing radius

F

5940mm (19' 6") 251.1[273.9] kN

SAE

25600[27930] kgf 56440[61570] lbf

Bucket digging force

296.2[323.1] kN ISO

30200[32950] kgf 66580[72630] lbf 126.5[138.0] kN

SAE

12900[14070] kgf 28440[31030] lbf

Arm crowd force

130.4[142.3] kN ISO

13300[14510] kgf 29320[31990] lbf

[ ] : Power boost

2-7

4. WEIGHT R500LC-7A

Item

kg

lb

Upperstructure assembly

24540

54100

Main frame weld assembly

3550

7830

Engine assembly

940

2070

Main pump assembly

180

400

Main control valve assembly

420

930

Swing motor assembly

230

510

Hydraulic oil tank assembly

450

990

Fuel tank assembly

250

550

Counterweight(for 7.06m boom)

10200

22500

Counterweight(for 9.0m boom)

10700

23590

310

680

Lower chassis assembly

15200

33510

Lower track frame assy

8070

17790

Swing bearing

600

1320

Travel motor assembly

360

790

Turning joint

50

110

Track recoil spring and idler

300

660

Idler

250

550

Carrier roller

80

180

Track roller

80

180

Track-chain assembly(600mm standard triple grouser shoe)

6050

13330

Front attachment assembly(7.06m boom, 3.38m arm, 2.15m3 SAE heaped bucket)

10160

22400

7.06m boom assembly

3310

7300

6.55m boom assy

3180

7010

9.0m boom assy

4060

8950

3.38m arm assembly

1450

3200

2.15m3 SAE heaped bucket

2540

5600

Boom cylinder assembly

910

2010

Arm cylinder assembly

540

1190

Bucket cylinder assembly

300

660

Bucket control rod assembly

130

290

Cab assembly

2-8

5. LIFTING CAPACITIES 1) 6.55m(21' 6") boom, 2.40m(7'10") arm equipped with 2.15m3(SAE heaped) bucket, 600mm (24") triple grouser shoe and 10,200kg(22,490lb) counterweight.

·

·

: Rating over-front

: Rating over-side or 360 degree

Load radius Load point height

3.0m(10.0ft)

4.5m(15.0ft)

At max. reach

6.0m(20.0ft)

7.5m(25.0ft)

Capacity

Reach m(ft)

7.5m (25.0ft) 6.0m (20.0ft) 4.5m (15.0ft) 3.0m (10.0ft) 1.5m (5.0ft) Ground Line -1.5m (-5.0ft) -3.0m (-10.0ft) -4.5m (-15.0ft)

kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb

Note

1. Lifting capacity are based on SAE J1097 and ISO 10567.

2. Lifting capacity of the ROBEX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook located on the back of the bucket.

4. *indicates load limited by hydraulic capacity.

*26350 *58090 *22190 *48920

*26350 *58090 *22190 *48920

*19660 *43340

*19660 *43340

*23610 *52050 *21600 *47620 *18210 *40150 *12470 *27490

19860 43780 19940 43960 *18210 *40150 *12470 *27490

*13080 *28840 *14710 *32430 *16400 *36160 *17480 *38540 *17570 *38740 *16560 *36510 *14120 *31130

2-9

*13080 *28840 14420 31790 13610 30000 12980 28620 12640 27870 12560 27690 12730 28060

*11470 *25290 *12180 *26850 *13000 *28660 *13580 *29940 *13590 *29960 *12700 *28000

10290 22690 9980 22000 9580 21120 9240 20370 9010 19860 8960 19750

*10150 *22380 *9990 *22020 *9970 *21980 9970 21980 9990 22020 *10030 *22110 *9750 *21500 *8780 *19360

8880 19580 7350 16200 6550 14440 6190 13650 6160 13580 6510 14350 7370 16250 *8780 *19360

8.27 (27.1) 9.07 (29.8) 9.53 (31.3) 9.71 (31.9) 9.62 (31.6) 9.26 (30.4) 8.59 (28.2) 7.49 (24.6)

2) 7.06m(23' 2") boom, 2.40m(7' 10") arm equipped with 2.15m3(SAE heaped) bucket, 600mm (24") triple grouser shoe and 10,200kg(22,490lb) counterweight.

Load radius Load point height 7.5m (25.0ft) 6.0m (20.0ft) 4.5m (15.0ft) 3.0m (10.0ft) 1.5m (5.0ft) Ground Line -1.5m (-5.0ft) -3.0m (-10.0ft) -4.5m (-15.0ft)

3.0m(10.0ft)

4.5m(15.0ft)

6.0m(20.0ft)

At max. reach 7.5m(25.0ft)

9.0m(30.0ft)

Capacity

Reach m(ft)

kg lb kg lb kg lb kg lb kg lb kg lb kg *20900 19470 lb *46080 42920 kg *21270 *21270 *18160 *18160 lb *46890 *46890 *40040 *40040 kg *13760 *13760 lb *30340 *30340

*12620 *27820 *14390 *31720 *16110 *35520 *17120 *37740 *17190 *37900 *16330 *36000 *14430 *31810 *10760 *23720

*12620 *27820 14020 30910 13140 28970 12530 27620 12240 26980 12200 26900 12370 27270 *10760 *23720

*10340 *10340 *22800 *22800 *10820 10180 *23850 22440 *11680 9780 *10120 *25750 21560 *22310 *12580 9330 *10510 *27730 20570 *23170 *13210 8970 *10760 *29120 19780 *23720 *13340 8740 *29410 19270 *12750 8680 *28110 19140 *11040 8820 *24340 19440

7110 15670 6910 15230 6720 14820

*9180 *20240 *9080 *20020 *9080 *20020 8950 19730 8970 19780 *9210 *20300 *9040 *19930 *8420 *18560

7630 16820 6440 14200 5780 12740 5480 12080 5460 12040 5730 12630 6410 14130 7840 17280

8.92 (29.3) 9.66 (31.7) 10.10 (33.1) 10.26 (33.7) 10.18 (33.4) 9.84 (32.3) 9.22 (30.2) 8.22 (27.0)

3) 7.06m(23' 2") boom, 2.90m(9' 6") arm equipped with 2.15m3(SAE heaped) bucket, 600mm (24") triple grouser shoe and 10,200kg(22,490lb) counterweight.

Load radius Load point height 7.5m (25.0ft) 6.0m (20.0ft) 4.5m (15.0ft) 3.0m (10.0ft) 1.5m (5.0ft) Ground Line -1.5m (-5.0ft) -3.0m (-10.0ft) -4.5m (-15.0ft)

kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb

3.0m(10.0ft)

4.5m(15.0ft)

6.0m(20.0ft)

At max. reach 7.5m(25.0ft)

9.0m(30.0ft)

Capacity

Reach m(ft)

*21630 *47690 *24730 *54520 *19310 *42570

*21630 *47690 *24730 *54520 *19310 *42570

*18310 *40370 *22070 *48660 *23640 *52120 *23280 *51320 *21870 *48220 *19470 *42920 *15640 *34480

*18310 *40370 20540 45280 19420 42810 19120 42150 19170 42260 19440 42860 *15640 *34480

*13530 *29830 *15390 *33930 *16690 *36800 *17100 *37700 *16590 *36570 *15100 *33290 *12190 *26870

*13530 *29830 13290 29300 12560 27690 12160 26810 12030 26520 12130 26740 *12190 *26870

2-10

*9570 *9570 *21100 *21100 *10150 *10150 *22380 *22380 *11080 9850 *9630 *24430 21720 *21230 *12080 9370 *10130 *26630 20660 *22330 *12870 8940 *10520 *28370 19710 *23190 *13200 8660 *10600 *29100 19090 *23370 *12890 8540 *28420 18830 *11680 8610 *25750 18980

7150 15760 6900 15210 6670 14700 6510 14350

*8450 7000 *18630 15430 *8410 5960 *18540 13140 *8460 5370 *18650 11840 8380 5080 18470 11200 8370 5050 18450 11130 8740 5270 19270 11620 *8740 5830 *19270 12850 *8420 6980 *18560 15390 *7260 *7260 *16010 *16010

9.38 (30.8) 10.08 (33.1) 10.50 (34.4) 10.66 (35.0) 10.58 (34.7) 10.26 (33.7) 9.66 (31.7) 8.72 (28.6) 7.30 (24.0)

4) 7.06m(23' 2") boom, 3.38m(11' 1") arm equipped with 2.15m3(SAE heaped) bucket, 600mm (24") triple grouser shoe and 10,200kg(22,490lb) counterweight.

Load radius Load point height 7.5m (25.0ft) 6.0m (20.0ft) 4.5m (15.0ft) 3.0m (10.0ft) 1.5m (5.0ft) Ground Line -1.5m (-5.0ft) -3.0m (-10.0ft) -4.5m (-15.0ft) -6.0m (-20.0ft)

kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb

3.0m(10.0ft)

4.5m(15.0ft)

6.0m(20.0ft)

At max. reach 7.5m(25.0ft)

9.0m(30.0ft)

Capacity

Reach m(ft)

*19510 *43010 *26060 *57450 *22420 *49430

*19510 *43010 *26060 *57450 *22420 *49430

*17020 *37520 *21080 *46470 *23420 *51630 *23730 *52320 *22730 *50110 *20660 *45550 *17260 *38050 *11650 *25680

*17020 *37520 *21080 *46470 19860 43780 19320 42590 19240 42420 19410 42790 *17260 *38050 *11650 *25680

*12850 *12850 *28330 *28330 *14860 13540 *32760 29850 *16410 12770 *36180 28150 *17110 12290 *37720 27090 *16910 12090 *37280 26650 *15740 12110 *34700 26700 *13320 12340 *29370 27210

*9650 *9650 *8840 *21270 *21270 *19490 *10650 10010 *9320 *23480 22070 *20550 *11740 9510 *9900 *25880 20970 *21830 *12670 9050 *10390 *27930 19950 *22910 *13170 8730 *10620 *29030 19250 *23410 *13080 8570 *10370 *28840 18890 *22860 *12190 8570 *26870 18890 *9930 8780 *21890 19360

7490 16510 7270 16030 7000 15430 6740 14860 6540 14420 6450 14220

*7940 6280 *17500 13850 *7910 5420 *17440 11950 *7960 4930 *17550 10870 7740 4690 17060 10340 7730 4650 17040 10250 8030 4830 17700 10650 *8220 5280 *18120 11640 *8000 6180 *17640 13620 *7220 *7220 *15920 *15920

10.00 (32.8) 10.66 (35.0) 11.05 (36.3) 11.20 (36.7) 11.13 (36.5) 10.82 (35.5) 10.26 (33.7) 9.40 (30.8) 8.11 (26.6)

5) 7.06m(23' 2") boom, 4.00m(13' 1") arm equipped with 2.15m3(SAE heaped) bucket, 600mm (24") triple grouser shoe and 10,200kg(22,490lb) counterweight.

Load radius Load point 3.0m(10.0ft) 4.5m(15.0ft) 6.0m(20.0ft) 7.5m(25.0ft) height

At max. reach 9.0m(30.0ft) 10.5m(35.0ft) Capacity

Reach m(ft)

7.5m kg *6430 *6430 *7150 (25.0ft) lb *14180 *14180 *15760 6.0m kg *8080 7550 *7160 (20.ft) lb *17810 16640 *15790 4.5m kg *9790 *9790 *8640 7280 *5420 5370 *7220 (15.0ft) lb *21580 *21580 *19050 16050 *11950 11840 *15920 3.0m kg *19190 *19190 *13770 13720 *10980 9540 *9310 6970 *7050 5210 7030 (10.0ft) lb *42310 *42310 *30360 30250 *24210 21030 *20530 15370 *15540 11490 15500 1.5m kg *22280 20090 *15580 12820 *12050 9020 *9920 6670 *7850 5050 7000 (5.0ft) lb *49120 44290 *34350 28260 *26570 19890 *21870 14700 *17310 11130 15430 Ground kg *14150 *14150 *23440 19230 *16640 12200 *12770 8630 *10320 6420 *7150 4920 7230 Line lb *31200 *31200 *51680 42390 *36680 26900 *28150 19030 *22750 14150 *15760 10850 15940 -1.5m kg *18510 *18510 *23100 18930 *16830 11890 *12950 8390 *10320 6270 *7620 (-5.0ft) lb *40810 *40810 *50930 41730 *37100 26210 *28550 18500 *22750 13820 *16800 -3.0m kg *23660 *23660 *21570 18980 *16090 11820 *12430 8320 *9680 6250 *7550 (-10.0ft) lb *52160 *52160 *47550 41840 *35470 26060 *27400 18340 *21340 13780 *16640 -4.5m kg *25710 *25710 *18800 *18800 *14260 11960 *10880 8430 *7150 (-15.0ft) lb *56680 *56680 *41450 *41450 *31440 26370 *23990 18580 *15760 -6.0m kg *18640 *18640 *14220 *14220 *10710 *10710 (-20.0ft) lb *41090 *41090 *31350 *31350 *23610 *23610

2-11

5540 10.64 12210 (34.9) 4820 11.26 10630 (36.9) 4390 11.62 9680 (38.1) 4170 11.77 9190 (38.6) 4120 (11.70) 9080 (38.4) 4260 11.41 9390 (37.4) 4620 10.88 10190 (35.7) 5320 10.08 11730 (33.1) 6680 8.91 14730 (29.2)

6) 7.06m(23' 2") boom, 4.50m(14' 9") arm equipped with 2.15m3(SAE heaped) bucket, 600mm (24") triple grouser shoe and 10,200kg(22,490lb) counterweight.

Load radius

At max. reach

Load point 3.0m(10.0ft) 4.5m(15.0ft) 6.0m(20.0ft) 7.5m(25.0ft) 9.0m(30.0ft) 10.5m(35.0ft) Capacity height

Reach

7.5m kg *6730 *6730 *6590 4990 (25.0ft) lb *14840 *14840 *14530 11000 6.0m kg *7500 *7500 *4930 *4930 *6620 4370 (20.0ft) lb *16530 *16530 *10870 *10870 *14590 9630 4.5m kg *9110 *9110 *8110 7320 *6660 5390 *6690 3990 (15.0ft) lb *20080 *20080 *17880 16140 *14680 11880 *14750 8800 3.0m kg *17640 *17640 *12870 *12870 *10360 9600 *8840 6980 *7820 5200 6490 3790 (10.0ft) lb *38890 *38890 *28370 *28370 *22840 21160 *19490 15390 *17240 11460 14310 8360 1.5m kg *21200 20380 *14860 12910 *11540 9040 *9530 6640 *8180 5000 6450 3740 (5.0ft) lb *46740 44930 *32760 28460 *25440 19930 *21010 14640 *18030 11020 14220 8250 Ground kg *14310 *14310 *22980 19250 *16190 12200 *12400 8580 *10040 6360 8190 4840 6640 3840 Line lb *31550 *31550 *50660 42440 *35690 26900 *27340 18920 *22130 14020 18060 10670 14640 8470 -1.5m kg *17750 *17750 *23160 18780 *16670 11780 *12770 8290 *10210 6170 *7850 4740 7110 4140 (-5.0ft) lb *39130 *39130 *51060 41400 *36750 25970 *28150 18280 *22510 13600 *17310 10450 15670 9130 -3.0m kg *22170 *22170 *22090 18710 *16250 11640 *12510 8160 *9840 6100 *7120 4710 (-10.0ft) lb *48880 *48880 *48700 41250 *35830 25660 *27580 17990 *21690 13450 *15700 10380 -4.5m kg *27780 *27780 *19780 18920 *14820 11710 *11360 8210 *8500 6190 *6890 5790 (-15.0ft) lb *61240 *61240 *43610 41710 *32670 25820 *25040 18100 *18740 13650 *15190 12760 -6.0m kg *21610 *21610 *15870 *15870 *11960 *11960 *8670 8500 *6000 *6000 (-20.0ft) lb *47640 *47640 *34990 *34990 *26370 *26370 *19110 18740 *13230 *13230

11.18 (36.7) 11.76 (38.6) 12.11 (39.7) 12.25 (40.2) 12.18 (40.0) 11.91 (39.1) 11.41 (37.4) 10.65 (34.9) 9.56 (31.4) 7.98 (26.2)

m(ft)

7) 9.00m(29' 6") boom, 5.85m(19' 2") arm equipped with 1.65m3(SAE heaped) bucket, 600mm (24") triple grouser shoe and 10,700kg(23,590lb) counterweight.

Load radius

At max. reach

Load point 3.0m(10.0ft) 5.0m(15.0ft) 7.0m(25.0ft) 9.0m(30.0ft) 11.0m(35.0ft) 13.0m(45.0ft) Capacity height 10.0m kg (35.0ft) lb 8.0m kg *4910 *4910 *2810 *2810 (25.0ft) lb *10820 *10820 *6190 *6190 6.0m kg *5320 *5320 *4370 3650 (20.0ft) lb *11730 *11730 *9630 8050 4.0m kg *9040 *9040 *7050 *7050 *5880 4990 *5110 3450 (15.0ft) lb *19930 *19930 *15540 *15540 *12960 11000 *11270 7610 2.0m kg *16870 16620 *10900 9970 *8070 6630 *6460 4600 *5410 3230 (-5.0ft) lb *37190 36640 *24030 21980 *17790 14620 14240 10140 *11930 7120 Ground kg *17270 15020 *12210 9020 *8880 6060 *6930 4250 5550 3030 Line lb *38070 33110 *26920 19890 *19580 13360 *15280 9370 12240 6680 -2.0m kg *11700 *11700 *18210 14440 *12720 8480 *9290 5680 *7160 4010 5400 2890 (-5.0ft) lb *25790 *25790 *40150 31830 *28040 18700 *20480 12520 *15790 8840 11900 6370 -4.0m kg *15000 *15000 *17860 14390 *12450 8290 *9180 5500 *7000 3890 *4190 2870 (-15.0ft) lb *33070 *33070 *39370 31720 *27450 18280 *20240 12130 *15430 8580 *9240 6330 -6.0m kg *18860 *18860 *15810 14660 *11330 8360 *8400 5530 *6190 3940 (-20.0ft) lb *41580 *41580 *34860 32320 *24980 18430 *18520 12190 *13650 8690 -8.0m kg *17900 *17900 *12440 *12440 *9090 8680 *6540 5780 (-25.0ft) lb *39460 *39460 *27430 *27430 *20040 19140 *14420 12740

2-12

Reach m(ft)

*4350 3530 13.66 *9590 7780 (44.8) *4290 2860 14.63 *9460 6310 (48.0) *4290 2450 15.25 *9460 5400 (50.0) 4200 2200 15.57 9260 4850 (51.1) 4080 2100 15.60 8990 4630 (51.2) 4140 2110 15.35 9130 4650 (50.4) 4390 2270 14.80 9680 5000 (48.6) *4530 2620 13.91 *9990 5780 (45.6) *4380 3290 12.61 *9660 7250 (41.4) *3820 *3820 10.72 *8420 *8420 (35.2)

6. BUCKET SELECTION GUIDE 1) GENERAL BUCKET

1.38m3 SAE ø1.38m3 SAE 1.65m3 SAE heaped bucket

ø1.65m3 SAE 1.84m3 SAE heaped bucket

ö2.15m3 SAE heaped bucket

2.56m3 SAE 2.79m3 SAE heaped bucket

3.03m3 SAE heaped bucket

3.20m3 SAE 3.60m3 SAE heaped bucket

Recommendation Capacity

Width

7.06m (23' 2") boom

Weight SAE heaped

CECE heaped

Without side cutter

With side cutter

1.38m3 (1.80yd3)

1.25m3 (1.63yd3)

995mm (39.2")

1145mm (45.1")

1.65m3 (2.16yd3)

1.48m3 (1.94yd3)

1140mm (44.9")

1290mm 1520kg (50.8") (3350lb)

1.84m3 (2.41yd3)

1.65m3 (2.16yd3)

1245mm (49.0")

1395mm (54.9")

1630kg (3590lb)

ö2.15m3 1.92m3 (2.81yd3) (2.51yd3)

1415mm (55.7")

1565mm (61.6")

1740kg (3840lb)

2.56m3 (3.35yd3)

2.27m3 (2.97yd3)

1635mm (64.4")

1785mm (70.3")

1870kg (4120lb)

2.79m3 (3.65yd3)

2.47m3 (3.23yd3)

1760mm (69.3")

1910mm (75.2")

1960kg (4320lb)

3.03m3 (3.96yd3)

2.67m3 (3.49yd3)

1890mm (74.4")

2040mm (80.3")

2090kg (4610lb)

3.20m3 (4.19yd3)

2.82m3 (3.69yd3)

1980mm (78.0")

2130mm (83.9")

2205kg (4860lb)

3.60m3 (4.71yd3)

3.17m3 (4.15yd3)

2200mm (86.6")

2350mm (92.5")

2395kg (5280lb)

ø1.38m3

1.20m3 (1.57yd3)

1100mm (43.3")

1250mm (49.2")

1360kg (3000lb)

1.44m3 (1.88yd3)

1350mm (53.1")

1500mm (59.1")

1550kg (3420lb)

(1.80yd ) 3

ø1.65m3 (2.16yd3)

2.4m arm (7' 10")

2.9m arm 3.38m arm 4.0m arm 4.5m arm 2.4m arm 5.85m arm (9' 6") (11' 1") (13' 1") (14' 9") (7' 10") (19' 2")

1420kg (3130lb)

ö : Standard bucket, ø : 9.00m Boom, 5.85m Arm only

Applicable for materials with density of 2000kgf/m3 (3370lbf/yd3) or less Applicable for materials with density of 1600kgf/m3 (2700lbf/yd3) or less Applicable for materials with density of 1100kgf/m3 (1850lbf/yd3) or less

2-13

6.55m(21'5") 9.00m(29'6") boom boom

2) ROCK AND HEAVY DUTY BUCKET

Ľ 1.8m3 SAE Ľ 2.2m3 SAE Ľ 2.43m3 SAE heaped bucket

ľ 2.2m3 SAE heaped bucket

Capacity

Recommendation

Width

7.06m (23' 2") boom

Weight CECE heaped

Without side cutter

With side cutter

ľ2.20m3 (2.88yd3)

1.80m3 (2.35yd3)

1840mm (72.4")

-

2170kg (4780lb)

Ľ1.80m3

1.50m3 (1.96yd3)

1560mm (61.4")

-

2090kg (4610lb)

1.80m3 (2.35yd3)

1835mm (72.2")

-

2295kg (5060lb)

2.10m3 (2.75yd3)

1885mm (74.2")

-

2335kg (5150lb)

2.80m3 (3.66yd3)

2095mm (82.5")

-

2900kg (6390b)

Ľ2.20m3 (2.88yd3)

Ľ2.43m3 (3.18yd3)

Ľ3.20m3 (4.19yd3)

6.55m boom

2.4m arm 2.9m arm 3.38m arm 4.0m arm 4.5m arm 2.4m arm (11' 1") (7' 10") (9' 6") (13' 1") (14' 9") (7' 10")

SAE heaped

(2.35yd3)

Ľ 3.20m3 SAE heaped bucket

ľ : Heavy duty bucket Ľ : Rock bucket

Applicable for materials with density of 2000kgf/m3 (3370lbf/yd3) or less Applicable for materials with density of 1600kgf/m3 (2700lbf/yd3) or less Applicable for materials with density of 1100kgf/m3 (1850lbf/yd3) or less

2-14

7. UNDERCARRIAGE 1) TRACKS X-leg type center frame is integrally welded with reinforced box-section track frames. The design includes dry tracks, lubricated rollers, idlers, sprockets, hydraulic track adjusters with shock absorbing springs and assembled track-type tractor shoes with triple grousers.

2) TYPES OF SHOES Triple grouser Model

R500LC-7A

Double grouser

Shapes

Shoe width

mm(in)

Operating weight

kg(lb)

600(24)

700(28)

750(30)

800(32)

700(28)

48800(107580) 49340(108770) 49590(109330) 49850(109900) 48800(107580) 49340(108770)

Ground pressure kgf/cm2(psi)

0.84(11.94)

0.73( 10.38)

0.69( 9.81)

Overall width

3540(11' 7")

3640(11' 11")

3690(12' 1") 3740(12' 3")

mm(ft-in)

600(24)

0.65( 9.24)

0.84( 11.94)

0.73( 10.38)

3540(11' 7") 3640(11' 11")

3) NUMBER OF ROLLERS AND SHOES ON EACH SIDE Item

Quantity

Carrier rollers

3EA

Track rollers

9EA

Track shoes

53EA

4) SELECTION OF TRACK SHOE Suitable track shoes should be selected according to operating conditions.

Method of selecting shoes Confirm the category from the list of applications in table 2, then use table 1 to select the shoe.

Wide shoes(Categories B and C) have limitations on applications. Before using wide shoes, check the precautions, then investigate and study the operating conditions to confirm if these shoes are suitable.

Select the narrowest shoe possible to meet the required flotation and ground pressure. Application of wider shoes than recommendations will cause unexpected problem such as bending of shoes, crack of link, breakage of pin, loosening of shoe bolts and the other various problems.

2-15

※ Table 1 Specification

Category

600mm triple grouser

Standard

A

600mm double grouser

Option

A

700mm triple grouser, double grouser

Option

B

750mm triple grouser

Option

B

800mm triple grouser

Option

C

Track shoe

※ Table 2 Category A

B

Applications

Precautions

Rocky ground, river beds, normal soil

· Travel at low speed on rough ground with large obstacles such as

Normal soil, soft ground

· These shoes cannot be used on rough ground with large obstacles such

boulders or fallen trees

as boulders or fallen trees

· Travel at high speed only on flat ground · Travel slowly at low speed if it is impossible to avoid going over obstacles Extremely soft gound · Use the shoes only in the conditions that the machine sinks and it is (Swampy ground) impossible to use the shoes of category A or B

· These shoes cannot be used on rough ground with large obstacles such C

as boulders or fallen trees

· Travel at high speed only on flat ground · Travel slowly at low speed if it is impossible to avoid going over obstacles

2-16

8. SPECIFICATIONS FOR MAJOR COMPONENTS 1) ENGINE Item

Specification

Model

Cummins QSM 11

Type

4-cycle turbocharged charge air cooled diesel engine

Cooling method

Water cooling

Number of cylinders and arrangement

6 cylinders, in-line

Firing order

1-5-3-6-2-4

Combustion chamber type

Direct injection type

Cylinder boreÝstroke

125 Ý147.1mm(4.92"Ý5.79")

Piston displacement

10800cc(659cu in)

Compression ratio

16.3 : 1

Rated gross horse power(SAE J1995)

362ps at 1900rpm(357Hp / 266kW at 1900rpm)

Maximum torque

170.6kgfÂm(1234lbfÂft) at 1400rpm

Engine oil quantity

37.85˶(10U.S. gal)

Dry weight

942kg(2077lb)

High idling speed

1850 Ü50rpm

Low idling speed

700 Ü50rpm

Rated fuel consumption

161.8g/HpÂhr at 1900rpm

Starting motor

Delco Remy 42MT (24V-7.2kW)

Alternator

Delco Remy 24V-50A

Battery

2Ý12VÝ160Ah

2) MAIN PUMP Item

Specification

Type

Variable displacement tandem axis piston pumps

Capacity

2Ý200cc/rev

Maximum pressure

330kgf/cm2 (4690psi)[360kgf/cm2 (5120psi)]

Rated oil flow

2Ý380˶/min (100.4U.S. gpm/83.6U.K. gpm)

Rated speed

1900rpm

[ ]: Power boost

2-17

3) GEAR PUMP Item

Specification

Type

Fixed displacement gear pump single stage

Capacity

15cc/rev

Maximum pressure

35kgf/cm2(498psi)

Rated oil flow

28.5˶/min(7.5U.S. gpm/6.3U.K. gpm)

4) MAIN CONTROL VALVE Specification

Item R500LC-7A

R500LC-7A Long reach

Type

9 spools

Operating method

Hydraulic pilot system

Main relief valve pressure

330kgf/cm2 (4695psi)[360kgf/cm2 (5120psi)]

Overload relief valve pressure

Boom

380kgf/cm2 (5400psi)

380kgf/cm2 (5400psi)

Arm

380kgf/cm2 (5400psi)

280kgf/cm2 (3980psi)

Bucket

380kgf/cm2 (5400psi)

280kgf/cm2 (3980psi)

[ ]: Power boost

5) SWING MOTOR Item

Specification

Type

Fixed displacement axial piston motor

Capacity

148.5cc/rev

Relief pressure

285kgf/cm2(4050psi)

Braking system

Automatic, spring applied hydraulic released

Braking torque

63kgfÂm(456lbfÂft)

Brake release pressure

23~50kgf/cm2(327~711psi)

Reduction gear type

2 - stage planetary

Swing speed

10.0rpm

6) TRAVEL MOTOR Item

Specification

Type

Variable displacement axial piston motor

Relief pressure

345kgf/cm2(4910psi)

Capacity(max / min)

160/100cc/rev

Reduction gear type

3-stage planetary

Braking system

Automatic, spring applied hydraulic released

Brake release pressure

17~50kgf/cm2(242~711psi)

Braking torque

103kgfÂm(745lbfÂft)

2-18

7) REMOTE CONTROL VALVE Item

Specification

Type

Pressure reducing type

Operating pressure Single operation stroke

Minimum

6.5kgf/cm2(92psi)

Maximum

26kgf/cm2(370psi)

Lever

61mm(2.4in)

Pedal

123mm(4.84in)

8) CYLINDER Specification

Item Boom cylinder

Bore dia×Rod dia×Stroke Ø170×Ø115×1570mm Cushion

Extend only

Bore dia×Rod dia×Stroke Ø190×Ø130×1820mm

Arm cylinder

Cushion

Bucket cylinder

Extend and retract

Bore dia×Rod dia×Stroke Ø170×Ø115×1370mm Cushion

Extend only

※ Discoloration of cylinder rod can occur when the friction reduction additive of lubrication oil spreads on the rod surface. ※ Discoloration does not cause any harmful effect on the cylinder performance.

9) SHOE Item

Width

Ground pressure

Link quantity

Overall width

Standard ★600mm(24")

0.86kgf/cm2(12.23psi)

53

3540mm(11' 7")

★700mm(28")

0.75kgf/cm2(10.67psi)

53

3640mm(11' 11")

★750mm(30")

0.70kgf/cm2( 9.96psi)

53

3690mm(12' 1")

★800mm(32")

0.66kgf/cm2( 9.39psi)

53

3740mm(12' 3")

※600mm(24")

0.86kgf/cm2(12.23psi)

53

3540mm(11' 7")

※700mm(28")

0.75kgf/cm2(10.67psi)

53

3640mm(11' 11")

R500LC-7A Option

★Triple grouser ※Double grouser

2-19

10) BUCKET Capacity

Item Standard

SAE heaped

CECE heaped

2.15m3(2.81yd3)

1.92m3(2.51yd3)

5

1415mm(55.7")

1565mm(61.6")

3

1.38m (1.80yd )

1.25m (1.63yd )

4

995mm(39.2")

1145mm(45.1")

1.65m3(2.16yd3)

1.48m3(1.94yd3)

5

1140mm(44.9")

1290mm(50.8")

3

1.84m (2.41yd )

3

1.65m (2.16yd )

5

1245mm(49.0")

1395mm(54.9")

2.56m3(3.35yd3)

2.27m3(2.97yd3)

5

1635mm(64.4")

1785mm(70.3")

3

2.79m (3.65yd )

3

2.47m (3.23yd )

5

1760mm(69.3")

1910mm(75.2")

3.03m3(3.96yd3)

2.67m3(3.49yd3)

6

1890mm(74.4")

2040mm(80.3")

3

3.20m (4.19yd )

3

2.82m (3.69yd )

7

1980mm(78.0")

2130mm(83.9")

3.60m3(4.71yd3)

3.17m3(4.15yd3)

7

2200mm(86.6")

2350mm(92.5")

3

★1.38m (1.80yd )

3

1.20m (1.57yd )

4

1100mm(43.3")

1250mm(49.2")

★1.65m3(2.16yd3)

1.44m3(1.88yd3)

5

1350mm(53.1")

1500mm(59.1")

3

◈2.20m (2.88yd )

3

1.80m (2.35yd )

5

1840mm(71.3")

-

⊙1.80m3(2.35yd3)

1.50m3(1.96yd3)

5

1560mm(61.4")

-

3

⊙2.20m (2.88yd )

3

1.80m (2.35yd )

5

1810mm(71.3")

-

⊙2.43m3(3.18yd3)

2.10m3(2.75yd3)

5

1860mm(73.2")

-

⊙3.20m (4.19yd )

2.80m (3.66yd )

7

2080mm(81.9")

-

3

3

3

R500LC-7A

Option

Width Tooth quantity Without side cutter With side cutter

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

★ : 9.00m Boom, 5.85m Arm only ◈ : Heavy duty bucket ⊙ : Rock bucket(Esco type)

2-20

9. RECOMMENDED OILS Use only oils listed below or equivalent.

Do not mix different brand oil.

Service point

Kind of fluid

Ambient temperature 。 C (。 F)

Capacity ℓ(U.S. gal)

-20 (-4)

-10 (14)

0 (32)

10 (50)

20 (68)

30 (86)

SAE 30 Engine oil pan

SAE 10W Engine oil

38(10) SAE 10W-30 SAE 15W-40

5.0×2 (1.3×2)

Swing drive Gear oil

Hydraulic tank

SAE 85W-140

5.0×2 (1.3×2)

Final drive

Hydraulic oil

ISO VG 32

Tank; 250(66)

ISO VG 46 System; 380(100)

ISO VG 68

ASTM D975 NO.1 Fuel tank

Diesel fuel

610(161) ASTM D975 NO.2

Fitting (Grease nipple)

Grease

Radiator (Reservoir tank)

Mixture of antifreeze and water 50 : 50

NLGI NO.1

As required

NLGI NO.2

Ethylene glycol base permanent type

50(13.2)

SAE : Society of Automotive Engineers API : American Petroleum Institute ISO : International Organization for Standardization NLGI : National Lubricating Grease Institute ASTM : American Society of Testing and Material

2-21

40 (104)

CONTROL DEVICES 1. CAB DEVICES 1) The ergonomically designed console box and suspension type seat provide the operator with comfort.

2) ELECTRONIC MONITOR SYSTEM (1) The centralized electronic monitor system allows the status and conditions of the machine to be monitored at a glance.

(2) It is equipped with a safety warning system for early detection of machine malfunction.

Horn switch

Switch panel

Breaker operation sw

Cassette & radio

RH control lever

Air vent

Cluster

Speaker 1 2 3 HYU 4

NDA I

5 TA

Storage box Seat

Electric box assy SPARE

SPARE

20A

10A 20A 10A

CA

B

RE

FUSE HOLDER

SPARE

10A

LAMP CABIN

5A

& HEATER

LIGHT

CIGAR - HEAT PRE

SPARE

SPARE

5A

5A

AC

RY

5A

RY

- 35 Y RY

CR

-5

1

HONE CR

-2

COMP RY

C/RADIO

CR

2

SOLENOID

RY TRAVEL

PANEL

CLUSTER

3

SOLENOID

R

5A

5A

5A 10A

10A 20A

SWITCH

FUEL

SOLENOID

HONE

PANEL SWITCH

CONVERTO

10A

5A

20A

AC

5A

20A

5A

SOL.

MOTOR

CUT-OFF

5A

SAFETY

10A 10A 20A

WIPER

5A

5A

LAMP

BEACON

F/PUMP HEAD MOTOR

LAMP

& HEATER

FUEL

10A

10A

LAMP WORK LAMP

KEY START

BOOM

AC

WIPER

POWER

SAFET

CR

-7

ETHER CR

- 36

MCU controller Resistor Fuse box Master switch Aircon & heater switch One touch decel switch

Travel lever

Power max switch

Travel pedal

LH control lever

Foot rest

Safety lever 210N7A3CD01A

3-1

2. CLUSTER (up to #0057) 1) MONITOR PANEL The gauges panel consists of gauges and lamps as shown below, to warn the operator in case of abnormal machine operation or conditions for the appropriate operation and inspection. Â Gauges : Indicate operating status of the machine. Â Warning lamp : Indicate abnormality of the machine(Red). Â Pilot lamp : Indicate operating status of the machine(Amber). ö The monitor installed on this machine does not entirely guarantee the condition of the machine. Daily inspection should be performed according to chapter 6, Maintenance. ö When the monitor provides a warning immediately check the problem, and perform the required action.

Monitoring display Fuel gauge

Fuel low level warning lamp Hyd oil temp warning lamp

Hyd oil temp gauge Overheat warning lamp Engine coolant temp gauge Air cleaner warning lamp

CPU controller check warning lamp

Engine oil pressure warning lamp

Power max pilot lamp

Battery charging warning lamp Overload warning lamp Warming up pilot lamp

Engine check warning lamp

Decel pilot lamp

50073CD08

ö The warning lamp lights ON and the buzzer sounds when the machine has a problem.

In this case, press the buzzer stop switch and buzzer stop, but the warning lamp lights until the problem is cleared.

3-2

(1) Monitoring display Η This displays the current time and machine information such as engine rpm, coolant/hydraulic oil temperature, hydraulic oil pressure and also error codes. ö Refer to the page 4-11 for details.

14073CD03

(2) Fuel gauge

White range 21073CD04

Η This gauge indicates the amount of fuel in the fuel tank. Θ Fill the fuel when the white range or warning lamp blinks. ö If the gauge illuminates the white range or warning lamp blinks even though the machine is on the normal condition, check the electric device as that can be caused by the poor connection of electricity or sensor.

(3) Hydraulic oil temperature gauge

Red range 21073CD05

Η This indicates the temperature of coolant. ÂWhite range : Below 30Á C(86Á F) ÂGreen range : 30-105 Á C(86-221Á F) ÂRed range : Above 105Á C(221Á F) Θ The green range illuminates when operating. Ι Keep idling engine at low speed until the green range illuminates, before operation of machine. Κ When the red range illuminates, reduce the load on the system. If the gauge stays in the red range, stop the machine and check the cause of the problem.

(4) Engine coolant temperature gauge

Red range 21073CD05

Η This indicates the temperature of coolant. ÂWhite range : Below 30Á C (86Á F) ÂGreen range : 30-105Á C (86-221Á F) ÂRed range : Above 105Á C (221Á F) Θ The green range illuminates when operating. Ι Keep idling engine at low speed until the green range illuminates, before operation of machine. Κ When the red range illuminates, turn OFF the engine, check the radiator and engine.

3-3

(5) Fuel low level warning lamp Η This lamp blinks and the buzzer sounds when the level of fuel is below 68˶(18U.S. gal). Θ Fill the fuel immediately when the lamp blinks.

21073CD04A

(6) Hydraulic oil temperature warning lamp Η This warning lamp operates and the buzzer sounds when the temperature of hydraulic oil is over 105Á C (221Á F ). Θ Check the hydraulic oil level when the lamp blinks.

21073CD05A

(7) Overheat warning lamp Η This lamp blinks and the buzzer sounds when the temperature of coolant is over the normal temperature 110Á C (230Á F ). Θ Check the cooling system when the lamp blinks. Ι Check for debris between oil cooler and radiator.

21073CD06A

(8) Engine oil pressure warning lamp Η This lamp blinks and the buzzer sounds after starting the engine because of the low oil pressure. Θ If the lamp blinks during engine operation, shut OFF engine immediately. Check oil level.

21073CD07

(9) Air cleaner warning lamp Η This lamp blinks and the buzzer sounds when the filter of air cleaner is clogged. Θ Check the filter and clean or replace it.

21073CD08

3-4

(10) MCU controller check warning lamp Η Communication problem between MCU controller and cluster makes the lamp blink and the buzzer sounds. Θ Check the communication line between MCU controller and cluster.

21073CD10

(11) Engine check warning lamp

29073CD10

Η This lamp blinks and buzzer sounds when the communication between MCU controller and ECM on the engine is abnormal or if any fault code received from ECM. Θ Check the communication line between them.

If the communication line is OK, then check the fault code on the cluster.

(12) Battery charging warning lamp Η This lamp blinks and the buzzer sounds when the starting switch is ON, it is turned OFF after starting the engine. Θ Check the battery charging circuit when this lamp blinks, during engine operation.

21073CD13

(13) Overload warning lamp (Option) Η When the machine is overload, the overload warning lamp blinks during the overload switch ON.

21073CD15

(14) Power max pilot lamp Η The lamp will be ON when pushing power max switch on the LH RCV lever.

21073CD11

3-5

(15) Decel pilot lamp Η Operating auto decel or one touch decel makes the lamp ON. Θ The lamp will be ON when pushing one touch decel switch on the LH RCV lever.

21073CD17

(16) Warming up pilot lamp Η This lamp is turned ON when the coolant temperature is below 30Á C (86Á F ). Θ The automatic warming up is cancelled when the engine coolant temperature is above 30Á C , or when 10 minutes have passed since starting.

21073CD18

3-6

2) SWITCH PANEL

Power mode switch

Work mode switch

Travel speed switch

User mode switch

Buzzer stop switch Select switch

Auto deceleration switch

50073CD19

(1) Work mode switch

21073CD20

Η This switch is to select the machine operation mode, which shifts from general operation mode to heavy operation mode and breaker mode in a raw by pressing the switch.  : Heavy duty work mode  : General work mode  : Breaker operation mode ö Refer to the page 4-6 for details.

(2) User mode switch Η This switch is to select the maximum power or user mode. ÂM : Maximum power ÂU : Memorizing operators preferable power setting ö Refer to the page 4-6 for details.

140W73CD21

3-7

(3) Auto deceleration switch

21073CD22

Η This switch is used to actuate or cancel the auto deceleration function.

When the switch actuated and all control levers and pedals are at neutral position, engine speed will be lowered automatically to save fuel consumption. ÂLight ON : Auto deceleration function is selected. ÂLight OFF : Auto deceleration function is cancelled so that the engine speed increased to previous setting value. Θ Operating the auto deceleration function makes the decel indicating lamp on the LCD panel ON.

(4) Power mode switch Η The lamp of selected mode is turned ON by pressing the switch( ), when selecting the power mode to use. ÂH : This is used for high power work. ÂS : This is used for standard power work.

21073CD23

(5) Travel speed control switch Η This switch is to control the travel speed which is changed to high speed(Rabbit mark) by pressing the switch and low speed(Turtle mark) by pressing again.

21073CD24

(6) Buzzer stop switch

21073CD25

Η When the starting switch is turned ON first, normally the alarm buzzer sounds for 2 seconds during lamp check operation. Θ The red lamp lights ON and the buzzer sounds when the machine has a problem.

In this case, press this switch and buzzer stops, but the red lamp lights until the problem is cleared.

(7) Select switch

21073CD25A

Η This switch is used to select the monitor display function. ö Refer to the page 4-11 for details. Θ If the switch is pressed for 3 seconds in time display mode, it moves to time adjusting function, and you can adjust the time as below. ÂHour by auto decel( )switch ÂMinute by buzzer stop( ) switch. Ι After time set, the switch is pressed, it returs to clock display.

3-8

2. CLUSTER (#0058 and up) 1) MONITOR PANEL The monitor panel consists of LCD and lamps as shown below, to warn the operator in case of abnormal machine operation or conditions for the appropriate operation and inspection. Â LCD : Indicate operating status of the machine. Â Warning lamp : Indicate abnormality of the machine(Red). Â Pilot lamp : Indicate operating status of the machine(Amber). ö The monitor installed on this machine does not entirely guarantee the condition of the machine. Daily inspection should be performed according to chapter 6, Maintenance. ö When the monitor provides a warning immediately check the problem, and perform the required action.

LCD(Refer to the page 3-8-2 for details)

Warning lamp (Refer to the page 3-8-8 for details)

Pilot lamp (Refer to the page 3-8-8 for details)

3607A3CD02

ö The warning lamp lights ON and the buzzer sounds when the machine has a problem.

In this case, press the buzzer stop switch and buzzer stop, but the warning lamp lights until the problem is cleared.

3-8-1

2) LCD main operation display Option screen screen Option

Default screen 1

2 4

3

5

2

1 4 3 5

1607A3CD02A

1607A3CD02B

1 Time display 2 RPM display 3 Hydraulic oil temperature gauge 4 Fuel level gauge 5 Engine coolant temperature gauge

(1) Time display Η This displays the current time. ö Refer to the page 3-8-6 to set time for details.

1607A3CD02C

(2) RPM display Η This displays the engine rpm.

1607A3CD02C

(3) Hydraulic oil temperature gauge Η This gauge indicates the temperature of hydraulic oil in 12 step 12th step gauge. Â1st step : Below 30Á C(86Á F) Â2nd~10th step : 30-105 Á C(86-221Á F) Â11th~12th step : Above 105Á C(221Á F) 1st step 1607A3CD02D Θ The gauge between 2nd and 10th steps illuminates when operating. Ι Keep idling engine at low speed until the gauge between 2nd and 10th steps illuminates, before operation of machine. Κ When the gauge of 11th and 12th steps illuminates, reduce the load on the system. If the gauge stays in the 11th~12th steps, stop the machine and check the cause of the problem.

(4) Fuel level gauge 1st step

1607A3CD02E

Η This gauge indicates the amount of fuel in the fuel tank. Θ Fill the fuel when the 1st step or fuel icon blinks in red. ö If the gauge illuminates the 1st step or fuel icon blinks in red even though the machine is on the normal condition, check the electric device as that can be caused by the poor connection of electricity or sensor.

(5) Engine coolant temperature gauge 12th step

1st step 1607A3CD02F

Η This gauge indicates the temperature of coolant in 12 step gauge. Â1st step : Below 30Á C(86Á F) Â2nd~10th step : 30-105 Á C(86-221Á F) Â11th~12th step : Above 105Á C(221Á F) Θ The gauge between 2nd and 10th steps illuminates when operating. Ι Keep idling engine at low speed until the gauge between 2nd and 10th steps illuminates, before operation of machine. Κ When the gauge of 11th and 12th steps illuminates, turn OFF the engine, check the radiator and engine.

3-8-2

3) Warning of main operation screen (1) Warning display Η Engine coolant temperature - This lamp blinks and the buzzer sounds when the temperature of coolant is over the normal temperature 105Á C 221Á F) .

- Check the cooling system when the lamp blinks. Θ Fuel level - This lamp blinks and the buzzer sounds when the level of fuel is below 68˶(18 U.S. gal).

- Fill the fuel immediately when the lamp blinks. Ι Hydraulic oil temperature - This warning lamp operates and the buzzer sounds when the temperature of hydraulic oil is over 105 Á C 221 Á F) .

- Check the hydraulic oil level when the lamp blinks.

- Check for debris between oil cooler and radiator. Κ All gauge - This lamp blinks and the buzzer sounds when the all gauge is abnormal.

- Check the each system when the lamp blinks. Λ Communication error - Communication problem between MCU controller and cluster makes the lamp blinks and the buzzer sounds.

- Check if any fuse for MCU burnt off.

If not check the communication line between them.

(2) Pop-up icon display No

Switch

1 Work mode switch

Selected mode

Display

No

Switch

Selected mode

3 Auto Light ON deceleration switch

General work mode Heavy duty work mode

Light OFF 4 Travel speed Low speed control switch

Breaker operation mode 2 Power mode High power switch work mode

High speed

Standard power work mode

3-8-3

Display

4) LCD

SYSTEM MENU

1

Monitoring

Diagnosis

Management

Settings

Display

User Mode

2 4

1

: LCD

2

: Escape, Return to the previous menu

3

: Down/Left Direction

4

: Up/Right Direction

5

: Select(Enter) Activate the currently chosen item

5

3

2507A4OP95B

(1) Main menu 1

2

5

3

4

6

7

1

: Menu information

2

: Monitoring Equipment, Switch, Output

3

: Diagnosis Current error, Recorded error

4

: Maintenance

5

: Settings Time set Dual mode System lock(Reserved)

6

: Display Operation skin, Brightness, Language

7

: User mode

2507A4OP94

3-8-4

(2) Display map Η Monitoring

Θ Diagnosis a. New protocol

(Error display)

(Recorded error delete)

3-8-5

b. Old protocol : Old MCU controller - If there are more than 2 error codes, each one can be displayed by pressing or switch respectively.

- 3 error codes (ΗSPN200200, ΘFMI06, ΙSPN6789, ΚFMI04, Λ345) display.

Η

Θ

Λ

Η

Ι

Κ

Η

Ι

Ι

No change

Ι Maintenance

Κ Setting a. Time set

: Adjusting : Setting

b. System lock - Reserved

3-8-6

c. Dual mode - Changing the MCU mode

Λ Display a. Operation skin

b. Brightness

c. Language

Μ User mode

Usermode(U) is not selected.

: Adjusting

: Adjusting

: Adjusting

: Setting

: Setting

: Setting

3-8-7

5) Warning and pilot lamp (1) Engine oil pressure warning lamp Η This lamp blinks and the buzzer sounds after starting the engine because of the low oil pressure. Θ If the lamp blinks during engine operation, shut OFF engine immediately. Check oil level.

21073CD07

(2) Air cleaner warning lamp Η This lamp blinks and the buzzer sounds when the filter of air cleaner is clogged. Θ Check the filter and clean or replace it.

21073CD08

(3) MCU controller check warning lamp Η If any fault code is received from MCU controller, this lamp blinks and the buzzer sounds. Θ Check the communication line between MCU controller and cluster.

21073CD10

(4) Battery charging warning lamp Η This lamp blinks and the buzzer sounds when the starting switch is ON, it is turned OFF after starting the engine. Θ Check the battery charging circuit when this lamp blinks during engine operation.

21073CD13

(5) Overload warning lamp Η When the machine is overload, the overload warning lamp blinks during the overload switch is ON.

21073CD15

3-8-8

(6) Engine check warning lamp

29073CD10

Η This lamp blinks and the buzzer sounds when the communication between MCU controller and ECU on the engine is abnormal, or if any fault code received from ECU. Θ Check the communication line between them.

If the communication line is OK, then check the fault code on the cluster

(7) Power max pilot lamp Η The lamp will be ON when pushing power max switch on the LH RCV lever.

21073CD11

(8) Decel pilot lamp Η Operating auto decel or one touch decel makes the lamp ON. Θ The lamp will be ON when pushing one touch decel switch on the LH RCV lever.

21073CD17

(9) Warming up pilot lamp Η This lamp is turned ON when the coolant temperature is below 30Á C 86 Á F). Θ The automatic warming up is cancelled when the engine coolant temperature is above 30 Á C, or when 10 minutes have passed since starting.

21073CD18

(10) Preheat pilot lamp Η Turning the start key switch ON position starts preheating in cold weather. Θ Start the engine as this lamp is OFF.

21073CD12

3-8-9

6) SWITCH PANEL

Power mode switch

Work mode switch

Travel speed switch

User mode switch

Buzzer stop switch Auto deceleration switch

Select switch

1607A3CD19

ö W hen the switches (Work mode, Power mode, Auto decel, Travel speed control) are selected, the pop-up icon is displayed on the LCD. Refer to the page 3-4 for details.

(1) Work mode switch

21073CD20

Η This switch is to select the machine operation mode, which shifts from general operation mode to heavy operation mode and breaker mode in a raw by pressing the switch.  : Heavy duty work mode  : General work mode  : Breaker operation mode ö Refer to the page 4-6, 4-12-1 for details.

(2) User mode switch Η This switch is to select the maximum power or user mode. ÂM : Maximum power ÂU : Memorizing operators preferable power setting. ö Refer to the page 4-6, 4-12-1 for details.

1607A3CD21

3-8-10

(3) Auto deceleration switch

1607A3CD22

Η This switch is used to actuate or cancel the auto deceleration function. Θ When the switch actuated and all control levers and pedals are at neutral position, engine speed will be lowered automatically to save fuel consumption. ÂLight ON : Auto deceleration function is selected. ÂLight OFF : a. Auto deceleration function is cancelled so that the engine speed increased to previous setting value. b. One touch decel function is available.

(4) Power mode switch Η The lamp of selected mode is turned ON by pressing the switch( ). ÂH : High power work. ÂS : Standard power work.

21073CD23

(5) Travel speed control switch Η This switch is to control the travel speed which is changed to high speed(Rabbit mark) by pressing the switch and low speed(Turtle mark) by pressing it again.

21073CD24

(6) Buzzer stop switch

1607A3CD25

Η When the starting switch is turned ON first, normally the alarm buzzer sounds for 2 seconds during lamp check operation. Θ The red lamp lights ON and the buzzer sounds when the machine has a problem.

In this case, press this switch and buzzer stops, but the red lamp lights until the problem is cleared.

(7) Select switch Η This switch is used to enter main menu and sub menu of LCD. ¡ Refer to the page 3-8-4 for details.

1607A3CD25A

3-8-11

3. SWITCHES

Beacon switch Breaker selection switch Accel dial C

A

B

Start switch

Overload switch Quick clamp switch

Heated seat switch Cab light switch Travel alarm switch Preheat switch Washer switch Wiper switch Main light switch

Switch panel

TONE

2

5 BAL

VOL ON

BAND SEEK push

FAD TUNE 1

4

PROG 3

6

PLL SYNTHESIZE R

TUNNING

Breaker operation switch Horn switch

CAB

20A

FUSE HOLDER

SPARE

LAMP

SPARE

CABIN LAMP LAMP

BEACON

SPARE

WORK F/PUMP LAMP

AC

HEAD

& HEATER

& HEATER

2 LIGHT

SOLENOID

CIGAR

SAFETY

1 - HEAT

PANEL MOTOR

SOLENOID

HONE

WIPER SOL.

AC

FUEL 3

MOTOR LAMP BOOM

WIPER

PRE

SOLENOID

SWITCH

RY

CUT-OFF

TRAVEL

CONVERTOR

FUEL

HONE

PANEL

RY

SWITCH

AC RY POWER CR

CR

-2

COMP RY CR

-7

ETHER CR

- 36

- 35 RY

SAFETY CR

-5

Master switch

One touch decel switch Power max switch 210N7A3CD02

1) STARTING SWITCH

21073CD27

(1) There are three positions, OFF, ON and START. Â (OFF) : None of electrical circuits activate. Â (ON) : All the systems of machine operate. Â (START) : Use when starting the engine. Release key immediately after starting. ö Key must be in the ON position with engine running to maintain electrical and hydraulic function and prevent serious machine damage.

3-9

2) MASTER SWITCH (1) This switch is used to shut off the entire electrical system.

(2) I : The battery remains connected to the electrical system.

O : The battery is disconnected to the electrical system. ö Never turn the master switch to O(OFF) with the engine running.

Engine and electrical system damage could result.

OF

13033CD81

3) ACCEL DIAL SWITCH (1) There are 10 dial setting.

(2) Setting 1 is low idle and setting 10 is high idle. ÂBy rotating the accel dial to right : Engine speed increases ÂBy rotating the accel dial to left : Engine speed decreases

21073CD34

4) MAIN LIGHT SWITCH

O

F

F

Pilot lamp(2nd)

(1) This switch used to operate the head light and work light. ÂPress the switch once to head light comes ON. ÂPress the switch once more to work light comes ON. ÂPress the switch again, return to a first step position. ÂPress the switch more than one second to turn off lights.

Pilot lamp(1st) 50073CD28

5) WIPER SWITCH

O

F

F

Pilot lamp(2nd)

(1) This switch used to operate wiper. ÂPress the switch once to intermittently operate wiper. ÂPress the switch once more to operate wiper low speed. ÂPress the switch again return to first step position. ÂPress the switch more than one second to turn off wiper.

Pilot lamp(1st) 50073CD29

6) WASHER SWITCH (1) The washer liquid is sprayed and the wiper is operated only while pressing this switch.

(2) The indicator lamp is turned ON when operating this switch.

21073CD30

3-10

7) PREHEAT SWITCH (1) This switch is used for starting the engine in cold weather. If pressed, starting aid coil warmed to get easier engine starting. ö Never hold the push button switch for more than 30 seconds, as this can damage the glow coils.

(2) The indicator lamp is turned ON when operating this switch.

21073CD31

8) TRAVEL ALARM SWITCH (1) This switch is to activate travel alarm function surrounding when the machine travels to forward and backward.

(2) On pressing this switch, the alarm operates only when the machine is traveling.

21073CD32

9) CAB LIGHT SWITCH(Option)

C

A

B

(1) This switch used to turns ON the cab light on the cab.

21073CD33

10) OVERLOAD SWITCH(Option) (1) When this switch turned ON, buzzer makes sound and overload warning lamp comes ON in case that the machine is overload.

(2) When turn OFF buzzer stops and warning lamp goes out.

21073CD35

11) BREAKER SELECTION SWITCH(Option) (1) This switch is used to select breaker. ö The breaker operates only when this switch is selected.

21073CD37

3-11

12) BEACON SWITCH(Option) (1) This switch turns ON the rotary light on the cab.

(2) The below indicator lamp is turned ON when operating this switch.

21073CD38

13) QUICK CLAMP SWITCH(Option) (1) This switch is used to engage or disengage the moving hook on quick clamp. ö Refer to the page 8-6 for details.

29073CD36

14) HEATED SEAT SWITCH(Option) (1) This switch is used to heat the seat.

2507A3CD02

15) HORN SWITCH (1) This switch is at the top of right side control lever.

On pressing, the horn sounds.

Horn switch

RH RCV-lever 1407A3CD05

16) BREAKER OPERATION SWITCH (1) On pressing this switch, the breaker operates only when the breaker selection switch on the switch panel is selected.

Breaker operation switch

RH RCV-lever 1407A3CD07

3-12

17) ONE TOUCH DECEL SWITCH (1) This switch is used to actuate the deceleration function quickly.

One touch decel switch

(2) The engine speed is increased to previous setting value by pressing the switch again.

LH RCV-lever 1407A3CD06

18) POWER MAX SWITCH (1) This switch activate power max function.

When this switch is kept pressed, hydraulic power of work equipment will be increased upto 110 percent during 8 seconds.

Power max switch

LH RCV-lever 1407A3CD08

(2) After 8 seconds, function is cancelled automatically even switch is keep pressed. ö Do not use for craning purposes.

3-12-1

4. LEVERS AND PEDALS RH control lever

1 2 3 HYU 4

NDA I

5 TA

SPARE

SPARE

20A

10A

CA

B

RE

FUSE HOLDER

10A 10A

5A

LIGHT

- HEAT

5A

5A

SWITCH

SPARE

FUEL

AC

RY

5A

RY

1

HONE CR

-2

COMP RY

C/RADIO

CR

2

SOLENOID

RY TRAVEL

PANEL

CLUSTER

3

SOLENOID

R

5A

5A

5A 10A

10A 20A

SPARE

SOLENOID

HONE

CIGAR

PRE

SWITCH

CONVERTO

10A

5A

& HEATER

5A

20A

20A

LAMP

AC

PANEL

CUT-OFF

5A

5A 5A

SOL.

10A 10A 20A

5A

SAFETY

MOTOR WIPER

10A

& HEATER

BEACON

F/PUMP HEAD

WIPER

MOTOR LAMP

AC

FUEL

10A 20A

SPARE

LAMP CABIN

LAMP WORK LAMP

KEY START

BOOM

POWER

CR

-7

ETHER CR

- 36

- 35 Y RY

SAFET CR

-5

Travel lever

LH control lever

Travel pedal

Safety lever 2907A3CD04A

1) LH CONTROL LEVER (1) This joystick is used to control the swing and the arm.

(2) Refer to operation of working device in chapter 4 for details.

1407A3CD09

2) RH CONTROL LEVER (1) This joystick is used to control the boom and the bucket.

(2) Refer to operation of working device in chapter 4 for details.

1407A3CD10

3-13

3) SAFETY LEVER (1) All control levers and pedals are disabled from operation by locating the lever to lock position as shown. ö Be sure to lower the lever to LOCK position when leaving from operator's seat.

Unlock Lock 1407A3CD11

(2) By pulling lever to UNLOCK position, machine is operational. ö Do not use the safety lever for handle when getting on or off the machine.

4) TRAVEL LEVER (1) This lever is mounted on travel pedal and used for traveling by hand.

The operation principle is same as the travel pedal.

(2) Refer to traveling of the machine in chapter 4 for details.

21073CD46

5) TRAVEL PEDAL (1) This pedal is used to move the machine forward or backward.

(2) If left side pedal is pressed, left track will move.

If right side pedal is pressed, right track will move.

(3) Refer to traveling of machine in chapter 4 for details.

21073CD46A

6) SEAT AND CONSOLE BOX ADJUST LEVER (1) This lever is used to move the seat and console box to fit the contours of the operator's body.

(2) Pull the lever to adjust forward or backward over 170mm(6.7").

Adjust lever 21073CD47

3-14

5. AIR CONDITIONER AND HEATER Air conditioner and heater are equipped for pleasant operation against outside termperature and defrost on window glass.

ÂLocation of air flow ducts

TONE BAL VOL ON

BAND SEEK

TUNE 1

4

PROG 3

6

PLL SYNTHES IZER TUNNING

A A

SPARE

SPARE

20A

FUSE HOLDER

B CA

RE LAMP CABIN LAMP LAMP

BEACON

SPARE

WORK F/PUMP LAMP

KEY

AC

20A

HEAD

& HEATER

FUEL 3

START MOTOR LAMP

5A

2 LIGHT

SOL.

AC

& HEATER

SOLENOID

CIGAR

SAFETY

1 - HEAT

PANEL PRE

MOTOR

SOLENOID

SWITCH

5A 10A 20A

SOLENOID

HONE

WIPER

5A

BOOM

WIPER

RY

R

CUT-OFF

TRAVEL

CONVERTO

FUEL

HONE

PANEL

RY

SWITCH

CLUSTER

AC

5A

RY

CR

CR

-2

COMP RY

C/RADIO

POWER

CR

-7

ETHER CR

- 36

- 35 Y RY

SAFET CR

-5

C B

Switch panel

Inlet change over switch Outlet change over switch Temperature control switch Fan speed switch Power switch Air conditioner switch

1407A3CD12

3-15

1) POWER SWITCH (1) This switch makes the system and the LED simultaneously ON or OFF. (2) Default setting values Function Air conditioner Fan speed Temperature Outlet Value

OFF

1

Max cool

Face

Inlet Recirculation

21073CD53

2) AIR CONDITIONER SWITCH(Compressor switch) (1) Operating this switch turns the compressor and the LED simultaneously on or off.

21073CD53

(2) In accordance with the evaporator temperature, compressor turns on or off automatically without changing LED state. ö Air conditioner operates to remove vapor and drains water through a drain hose. Water can be sprayed into the cab in case that the vacuum valve of drain hose has a problem.

In this case, exchange the vacuum valve.

3) FAN SPEED SWITCH (1) It is possible to control the fan to four steps.

(2) The first step or the fourth step gives 5 times beeps.

21073CD52

4) TEMPERATURE CONTROL SWITCH (1) There are 9 steps to control temperature from max cool to max warm controlled up and down by 1 step.

(2) Max cool and max warm arouse 5 times beeps.

Cool Warm 21073CD50

(3) For the max warm or the max cool it's better to be configured as following table.

Temperature

Air conditioner

Fan speed

Outlet

Inlet

Max cool

ON

4

Face

Recirculation

Max warm

OFF

3

Foot

Fresh

3-16

5) OUTLET CHANGE OVER SWITCH (1) There are four steps of air flow.

Mode Switch position

ú

A 21073CD51

Outlet

B C

ú

ú ú

ú ú

(2) When defroster switch operating, INLET switch turns to FRESH mode and air conditioner switch turns ON. (3) In case of heating range(5~Max warm), air conditioner won't turns ON.

6) INLET CHANGE OVER SWITCH

Fresh Recirculation

21073CD49

(1) It is possible to change the air-inlet method. Η Fresh Inhaling air from the outside to pressurize cab inside. ö Check out the fresh air filter periodically to keep a good efficiency. Θ Recirculation It recycles the heated or cooled air to increase the energy efficiency. ö Change air occasionally when using recirculation for a long time. ö Check out the recirculation filter periodically to keep a good efficiency.

(2) Recirculation function operates when the system is OFF but it can be changed whenever needed.

3-17

ÿ AUTO AIR CONDITIONER AND HEATER(OPTION) Auto air conditioner and heater system automatically keeps the optimum condition in accordance with operator's temperature configuration sensing ambient and cabin inside temperature.

ÂLocation of air flow ducts

TONE BAL VOL ON

BAND SEEK

TUNE 1

4

PROG 3

6

PLL SYNTHES IZER TUNNING

A A

SPARE

SPARE

20A

FUSE HOLDER

B CA

RE LAMP CABIN LAMP LAMP

BEACON

SPARE

WORK F/PUMP LAMP

KEY

AC

20A

HEAD

& HEATER

FUEL 3

START MOTOR LAMP

5A

2 LIGHT

SOL.

AC

& HEATER

SOLENOID

CIGAR

SAFETY

1 - HEAT

PANEL PRE

MOTOR

SOLENOID

SWITCH

5A

WIPER

10A 20A

SOLENOID

HONE

WIPER

5A

BOOM

RY

R

CUT-OFF

TRAVEL

CONVERTO

FUEL

HONE

PANEL

RY

SWITCH

CLUSTER

AC

5A

RY

CR

CR

-2

COMP RY

C/RADIO

POWER

CR

-7

ETHER CR

- 36

- 35 Y RY

SAFET CR

-5

C B

Switch panel Fresh air switch

LCD

Mode switch

Auto switch

Power OFF switch

Fan speed switch Air recirculation switch

Air conditioner switch Temperature control switch 2907A3CD48

3-17-1

1) POWER OFF SWITCH (1) This switch makes the system and the LED OFF. Just before the power OFF, setted values are stored.

(2) Default setting values Function Air conditioner In/outlet

LCD

Value

OFF

OFF

Inlet

Temperature

Mode

Previous sw OFF Previous sw OFF

370073CD54

2) AUTO SWITCH (1) Turn the starting switch to ON position, LCD lights ON. Auto air conditioner and heater system automatically keeps the optimum condition in accordance with operator's temperature configuration sensing ambient and cabin inside temperature.

(2) This switch can restart system after system OFF. 370073CD52

3) AIR CONDITIONER SWITCH(Compressor switch) (1) This switch turns the compressor and the LCD ON.

370073CD53

(2) In accordance with the temperature sensed by duct(evaporator) sensor, compressor turns ON or OFF automatically. ö Air conditioner operates to remove vapor and drains water through a drain hose. Water can be sprayed into the cab in case that the drain cock at the ending point of drain hose has a problem.

In this case, exchange the drain cock.

4) FAN SPEED SWITCH (1) Fan speed is controlled automatically by setted temperature.

(2) This switch controlls fan speed manually. Â There are 8 up/down steps to control fan speed. Â The maximum step or the minimum step beeps 5 times.

370074CD56

(3) This switch makes the system ON. ā : First step(AUTO) ă :First step(Manually)

3-17-2

5) TEMPERATURE CONTROL SWITCH (1) Setting temperature indication(17~32Á C, Scale : 1Á C) (2) Max cool and max warm beeps 5 times.

(3) The max cool or the max warm position operates as following table.

370074CD57

Temperature

Compressor

Fan speed

In/Outlet

Mode

Max cool

ON

Max(Hi)

Recirculation

Vent

Max warm

OFF

Max(Hi)

Fresh

Foot

6) MODE SWITCH (1) Operating this switch, it beeps and displays symbol of each mode in order.(Vent Ą B/L Ą Foot Ą Def Ą Vent) Vent

B/L

ú

ú

Foot

Defroster

ú

ú

Mode switch A

370074CD50

Outlet

B C

ú

ú

(2) When defroster switch operating, FRESH AIR/AIR RECIRCULATION switch turns to FRESH AIR mode and air conditioner switch turns ON. (3) When this switch ON, the system operates with previous configuration.

7) FRESH AIR/AIR RECIRCULATION SWITCH

36073CD58

(1) It is possible to change the air-inlet method. Η Fresh air( ) Inhaling air from the outside. ö Check out the fresh air filter periodically to keep a good efficiency. Θ Air recirculation( ) It recycles the heated or cooled air to increase the energy efficiency. ö Change air occasionally when using recirculation for a long time. ö Check out the recirculation filter periodically to keep a good efficiency.

3-17-3

8) SELF DIAGNOSIS FUNCTION (1) Procedure Starting switch ON

Press the air recirculation button over 5 times within 2 secondsduring pressing the AUTO switch All symbol of LCD blink 5 times

Error check

Switch OFF

System OFF

Press AUTO switch Cancelled diagnosis function(normal function) 3607A3CD69

(2) Error check  The corresponding error code flickers on the setup temperature display panel, the other symbol will turn OFF.  Error code flickers every 0.5 second.  If error code is more than two, each code flickers 2 times in sequence.  Error code Error code

Description

Error code

Description

11

Ambient sensor

14

Duct(evaporator) sensor

12

Cabin inside sensor

15

Temp actuator

13

Coolant temp sensor

16

Mode actuator

(3) Fail safe function Error description

Fail safe function

Ambient sensor(11)

Á C alternate value control

Cabin inside sensor(12)

Á C alternate value control

Coolant temp snesor(13)

More than 10 minutes after engine start up, the alternate vaule is ON

Duct(evaporator) snesor(14)

Á C alternate value control

Temp actuator(15)

If opening amount is 0%, the alternate value is 0% If not, the alternate value is 100%

Mode actuator(16)

The alternate value is Vent

3-17-4

6. OTHERS

Cassette & radio remote controller

Cassette & radio BAL TONE

2

VOL ON

5

VOL ON

push

FAD 1

FAD TUNE

2 4 3 PROG

5

Seat

PLL SYNTHESI ZER TUNNING

12V socket

EMERGENCY

SPARE

LAMP

SPARE

CABIN LAMP LAMP

BEACON

SPARE

WORK

3 MOTOR LAMP BOOM

HONE

WIPER

SOLENOID

SOL. AC

& HEATER

SAFETY

1 - HEAT

PANEL PRE

MOTOR

SOLENOID

SWITCH

WIPER

RY

CUT-OFF

TRAVEL

CONVERTOR

FUEL

HONE

RY AC RY POWER CR

COMP RY CR

-7

ETHER CR

- 36

- 35 RY

SAFETY CR

-5

CN-47 CN-19&19B CN-19A

CN-92A CN-92B CN-16&16B CN-16A

CN-47

Cigar lighter

CN-19&19A CN-19B

Service meter

CN-92A CN-92B

CN-16&16A CN-16B

Fuse box

Prolix resistor Machine control unit Connector for prolix resistor Emergency engine starting connector Emergency engine speed connector J1939 serial connector RS232 serial connector

210N7A3CD03

1) CIGAR LIGHTER (1) This can be used when the engine starting switch is ON.

13033CD69

(2) The lighter can be used when it springs out in a short while after being pressed down. ö Service socket Use cigar lighter socket when you need emergency power.

Do not use the lighter exceeding 24V, 100W.

3-18

2) SEAT The seat is adjustable to fit the contours of the operator's body. It will reduce operator fatigue due to long work hours and enhance work efficiency.

(1) Forward/Backward adjustment(A) Η Pull lever A to adjust seat forward or backward. Θ The seat can be moved forward and backward over 170mm(6.7") in 17 steps.

(2) Upward/Downward adjustment(B) Η Pull lever B to adjust seat upward or downward. Θ Forward or backward side adjustment only can be made, tilting to one side, by moving lever B respectively.

C

B

(3) Reclining adjustment(C) Pull lever C to adjust seat back rest.

(4) Arm rest adjustment(E) This can be adjusted by pushing the button E to right and left.

D

(5) Head rest adjustment (D) This is adjustable vertically to fit operator's requirements.

E

(6) Cushion adjustment (F) Adjust the handle to the operator's weight.

F A 30007A3CD69

Always check the condition of the seat belt and mounting hardware before operating the machine.

Replace the seat belt at least once every three years, regardless of appearance.

3) 12V SOCKET(Option)

V

12

(1) Utilize the power of 12V as your need and do not exceed power of 12V, 30W.

29073CD60

3-19

4) FUSE BOX

ુण૳

ુण૳

ુण૳

(1) The fuses protect the electrical parts and wiring from burning out.

ਏ‫ܛ‬೬

ફ஼ಟൈߩ߇

૕ଲ൵ ࡦഉ

઴߹ ൹ඹ

ਓٛ݊

ਆ଍౿ ൡ‫ٺ‬

ୢ୺݊

ৄߑ‫ڋ‬ଲ݁

઩ઘ಺ ํഉ

࣡੺‫׆‬

ୁડ݊

ੲୢৄߑ‫ڋ‬ଲ݁

઩ઘ಺ ํഉ

ண੽ళࠤୋ౿

૶ୢਓ

ৄߑ‫ڋ‬ଲ݁

૕ଲ൵ ࡦഉ

ಉপൈޭ‫ૈ݌‬

լֈ݊

சෘ

ண੽ళࠤୋ౿

೨߇ਆഉ

઩ઘ಺ ํഉ

ુવ

ફ஼ಟൈߩ߇

ફ஼ಟൈߩ߇

լୡ

ۡࢼ ޭଲൈ

઩ઘ಺ ಼ඹ ࠧߑଲ

լୡ ࠧߑଲ

ୢ଀ ࠧߑଲ

୍ਏ‫ࢺ ܛ‬஺

(2) The fuse box cover indicates the capacity of each fuse and circuit it protects. ö Replace a fuse with another of the same capacity.

Before replacing a fuse, be sure to turn OFF the starting switch.

ુવ ࠧߑଲ

45073CD56

5) MCU CONTROLLER LED

YR

(1) To match the engine torque with the pump absorption torque, MCU controller varies EPPR valve output pressure, which control pump discharge amount whenever feedbacked engine speed drops under the reference rpm of each mode set.

(2) Three LED lamps on the MCU controller display as below.

G

MO PA DEL RT :R NO OB :21 EX N8 290 -32 LC 10 -7 2

LED lamp

Trouble

-

G is turned ON Normal 45073CD72

Service

G and R are turned ON

Trouble on MCU or ROM Â Change the controller

G and Y are turned ON

Trouble on serial communication line

 Check if serial communication lines between controller and cluster are disconnected

Three LED are turned OFF

Trouble on MCU controller power

 Check if the input power wire (24V, GND) of controller is disconnected  Check the fuse

G : green,

R : red,

3-20

Y : yellow

6) EMERGENCY ENGINE STARTING CONNECTOR (1) If the MCU controller is removed, the engine does not start.

(2) Before starting the engine, connect the connector CN-92 A with B. ö Do not connect these connectors when the MCU is not removed.

A B

CN-92

11073CD46

7) EMERGENCY ENGINE SPEED CONTROL NORMAL CN-16A

(1) When the CAN commucation between the ECM and the MCU controller is abnormal due to malfunction of the MCU controller, change CN-16 connection from CN-16A to CN-16B and then control the engine speed by rotating accel dial switch.

CN-16 CN-16B

EMERGENCY 45073CD44

8) PROLIX RESISTOR Prolix resistor CN-19 CN-19B CN-19A 50073CD45

(1) This resistor is used to continuous working in case of malfunction of the MCU controller. ÂNormal : CN-19 connect with connector CN-19A ÂEmergency : CN-19 connect with connector CN-19B ö Never connect connector CN-19 with connector CN-19B when MCU controller is in normal operation.

9) SERVICE METER (1) This meter shows the total operation hours of the machine.

(2) Always ensure the operating condition of the meter during the machine operation. Inspect and service the machine based on hours as indicated in chapter 6, maintenance.

13033CD72

10) RS232 SERIAL CONNECTOR (1) MCU controller communicates the machine data with Lap top computer through RS232 connector.

45073D59

3-21

11) J1939 SERIAL CONNECTOR (1) ECM communicates the engine data with cummins INLINE-II adapter through J1939 connector. Η ECM fault code check Θ ECM program change Ι Engine data monitoring & test 29073CD59

12) UPPER WINDSHIELD

14073CD70

Latch 2

(1) Perform the following procedure in order to open the upper windshield. Η Release both latches(1) in order to release the upper windshield. Θ Hold both grips that are located at the bottom of the windshield frame and at the top of the windshield frame push the windshield upward. Ι Hold both grips that are provided on the windshield frame and back into the storage position until auto lock latch(2) is engaged, move the levers of both latches(1) into the locked position. Push the levers toward the rear of the cab in order to hold the windshield in storage position.

(2) Perform the following procedure in order to close the upper windshield. Η Move the lever of the auto lock latch(2) in the direction of the arrow in order to release the auto lock latch. Θ Reverse step Η through step Ι in order to close the upper windshield.

29073CD71

3-22

13) RADIO AND CASSETTE(Standard) 8

7

8

16

15

13

14

SOUND

MUTE

1

+

VOLUME

2

JAZZ VOCAL POP CLASSIC

DISC

ROCK FLAT LOUD TA AF AST

PRESET

4

BAND

5

VOLUME

-

10

TAAF

3

9

321

10

45

AST RDS

6 12

11 12

11 7807A3CD81

RADIO AND CD PLAYER(Option) 8

15

16

7

8

4x35W

SOUND

MUTE

+

RND

1

VOLUME

JAZZ VOCAL POP CLASSIC

DISC

ROCK FLAT LOUD TA AF AST

PRESET

4

BAND AST

RPT

2

5

SCN

3

TAAF

VOLUME

-

10

10

321

4 5

9

6 12

SOURCE RDS

11 12

11

7807A3CD82

ÿFRONT PANEL PRESENTATION 1

- - - - - - - - Preset button 1 1 RND - - - - - - - - - - - - CD random playback on/off 2 2 - - - - - - - - Preset button 2 RPT - - - - - - - - - - - - CD repeat track on/off 3 - - - -3- - - - - - - - - - - - - Preset button 3 SCN - - - - - - - - - - - - CD's track scan 4 4 - - - - - - - - Preset button 4 5 - - - -5- - - - - - - - - - - - - Preset button 5 6 TA AF - - - - - - - - Short press : TA on/off Long press : AF on/off 7 SOUND - - - - - - Select sound/audio styles 8 - - - - - - - - - - - - Short press : power on Long press : power off MUTE - - - - - - - - Short press : To mute or cancel mute.

9 - - - - - - - - - - - - - - - - - - - - - Display 10 - - - - - - - - - - - - - - - - - - - - - Volume knob : Press up/down to adjust the volume ; adjust selected audio mode

11 SOURCE - - Short press : Change source(Radio/CD) RDS - - - - - - - - - - Long press : RDS on/off BAND - - - - - - - Short press : To select band AST - - - - - - - - - - - Long press : Autostore(CD) Short press : Autostore(Cassette) 12 - - - - - - - - - - Tuner mode Short press : Auto search up/down Long press : Manual search up/down Cassette mode : No function CD mode Short press : Next/previous track Long press : Fast forward or fast rewind 13 - - - - - - - - - - - Fast forward(cassette deck) 14 - - - - - - - - - - - Fast rewind(cassette deck) 15 - - - - - - - - - - - Disc eject(CD) Eject cassette 16 - - - - - - - - - - - - - - - - - - - CD opening / Cassette opening

3-23

ÿAUDIO (1) Power and mute button

MUTE

7807A3CD09

Η POWER ON/OFF Press to switch on the set. Press for more than 2 seconds to switch off the set. Θ MUTE(Silence) Short press key to mute or cancel the mute(silence). ö The silence period may be interrupted by ALARM announcement or traffic announcement messages(If TA is switched on).

(2) Volume button Η Press the volume button up/down to adjust the volume.

Please make sure you can still hear the traffic(horns, sirens..).

+

VOLUME

VOLUME

-

7807A3CD11

(3) Sound button

SOUND

7807A3CD10

Η SOUND Whether you listen to Jazz, Vocal, Pop, Classic or Rock music, the SOUND button is the perfect setting for your choice. Â Press SOUND then the sound button to select BASS-Treb for your own sound style, or adjust the settings with the volume up/down buttons to select one of the pre define sound styles: - BASE -TRE - FLAT - JAZZ - VOCAL - POP - CLASSIC - ROCK

: Your own settings of bass and treble. : Original : Jazz music : Speech : Pop music : Classical music : Rock music

Θ AUDIO SETTING Â Press SOUND to select desired audio mode. Â Adjust the settings with the volume up/down buttons : - Sound style : BASS-TRE, FLAT, JAZZ, VOCAL, POP, CLASSIC, ROCK - BASS : Low notes - TREBLE : High notes - BALANCE : Left-right - FADER : Rear-front - LOUD : OFF, LOW, MID, HIGH Â Press the volume button to adjust the selected audio mode.

After 5 seconds the display goes back to the last mode of operation.

Adjustment of Bass and Treble settings is only possible when BASS-TRE is selected as the sound style.

3-24

(4) Source button BAND AST

SOURCE RDS

7807A3CD13

Η Press SOURCE to select the desired source : - TUNER - CD ö Products with cassette mechanism will change source to cassette only when a tape is inserted.

ÿRADIO (1) Wave band / Automatic search button BAND AST

SOURCE RDS

7807A3CD13

Η WAVEBAND Â Press BAND to select the desired band: FM I LW

FM II MWAST(AMAST)

FM AST MW I

Θ AUTOMATIC SEARCH Use search tuning to automatically search for a station. Â Press to tune a station of a lower frequency or to a higher frequency. Â To search for another station, press the key again. Ι MANUAL TUNING(If you know the frequency of the required station) Â To switch to manual tuning : Long press the search button or for more than 2 seconds will switch the tuning to manual tuning. Â Then press to tune to a station of a lower frequency or to a higher frequency. Â When keys are released, a time-out start to count. After 5 seconds time-out, display 'Auto' for one second and return to automatic search.

3-25

(2) Preselected button Preselected stations 1

4

2

5

3

TAAF 7807A3CD14

Η Manually storing stations in a preset Five stations per band can be stored and recalled using the preset keys(1 to 5).

Tune in to the desired station.  Press the desired preset key(1 to 5) for more than 2 seconds to  store the current tuned station.

When storing an FM station, the current program station name and the AF mode are stored on the preset(Some stations use alternating program service name). Θ Recalling a preset Press the desired preset key(1 to 5) to recall the stored station. Ι Automatically storing stations(AUTO-STORE) You can automatically store 5 strongest FM stations on the FM AST band or 5 strongest MW(AM) stations on the MW(AM) AST band.

When you use Auto store, the new stations replace any stations previously stored in the FM AST band or the MW(AM) AST band. Â Press AST to activate autostore. Â The set gives a beep and then mutes. Â When it has finished, you hear a beep followed by the station stored on preset 1. Â Sometimes it may not be possible to find 5 stations.

3-26

RADIO DATA SYSTEM(RDS) ON FM ÿR More and more stations broadcasts RDS informations in order to offer you many advantages including:

TA AF 7807A3CD15

(1) Program service name(PS) Allows the radio to display the name of the station instead of its frequency.

(2) Automatic returning(AF) The set remains tuned to the current station by continually searching the best alternative frequency for best reception.

You can switch AF off.

- Activate/Deactivate AF This set continuously search for other alternative frequencies for the tuned radio station and automatically selects the best frequency for reception. Long press TA for more than 2 second to activate/ deactivate AF. AF

(3) Alarm messages(PTY ALARM) This set automatically receives emergency messages made by the broadcaster. Â During the messages the display shows 'ALARM' and the stationname alternately.

(4) Traffic announcements(TA) You can activate the TA modes to give priority so as to hear traffic announcements related to these subjects(even if you play a cassettes/CD or mute the set).

- Activate/Deactivate TA  Short press BAND to select an FM band.  Press TA to activate/deactivate TA. - If you activate TA mode  You will hear the traffic announcements when broadcast by station(even if you play a cassette/CD or mute the set).  If the tuned station does not enable the reception of traffic announcements, the display shows 'NO TA'. The radio automatically searches and appropriate station.

- Interrupting traffic announcement mode If you do not wish to continue listening to a particular traffic announcement key to interrupt traffic announcement without  Short press TA switching off the mode  The set will return to the previous operating mode. ö You can switch off RDS features if not required.  Long press RDS key to switch off RDS.  All RDS related features e.g., TA, etc...will be deactivated when RDS is switch off.

AF

AF

BAND AST

SOURCE RDS

7807A3CD13

3-27

ÿCASSETTE PLAYER (1) Winding/Rewinding button

7807A3CD12

ö Only use good quality cassettes. ö To avoid possible tape damage always take out the cassette after use. Protect your cassettes. Put them back in their boxes immediately after use. ö Never expose cassettes to heat or direct sunlight. Η Play back Slide the cassette, with the open side to the right into the cassette opening. Playback starts.

The direction of playback is shown by indicator . Θ Stopping playback( ) Â To stop playback, Press the button fully home. Â The unit will switch over to radio reception. Â The cassette is partially ejected. Ι Reverse(before the end of the tape) Press the and buttons at the same time halfway in. Κ Fast rewind / Fast forward( or ) The direction of fast winding depends on the direction of play indicated on the display.

Display during playback

Action

Key to press

Fast forward Fast rewind Fast forward Fast rewind During fast forward or rewind the radio resumes. If you continue fast winding until the end of the tape, play back restarts automatically. Λ To stop fast winding To stop fast winding before the end of the tape, press the key which is not pressed( or ). Playback is then resumed. Μ End of the tape At the end of the tape, playback continues in the revers direction. Ν Maintenance After extended use of the cassette player, dust, contamination or grime can accumulate on the playback head.

This results in diminishing high-note reproduction. This can be remedied using a cleaning cassette(one or twice a month) and playing it through like an ordinary cassette.

3-28

ÿCD PLAYER (1) Winding / Rewinding button BAND AST

SOURCE RDS

7807A3CD13

Η CD playback This CD player is suitable only for 12cm disc, do not use irregular shaped CD. Â Slide the disc into the slot with label facing upwards. Playback starts. Â If a disc is already inserted : Press SOURCE to select CD as the source.

Playback starts. Θ Previous / Next track( or ) Â Short press the or button to select the desired track. Â Playback resume with the chosen track. Ι Fast rewind / Fast forward( or ) Â Long press the or button for more than 2 seconds to quickly move rewind or forward through the disc. Â Normal play back resumes when you release the button.

RND

1

Κ Random track playback  Press RND to activate / deactivate random track playback.

RPT

2

Λ Repeat track  Press RPT to activate / deactivate repeat current track.

SCN

3

Μ Scan track The scan function enables you to listen to the first few seconds of each track.  Press SCN to activate / deactivate scan track. Ν Disc eject  Press to eject the disc.

3-29

ÿRADIO SETTING

JAZZ VOCAL POP CLASSIC

ROCK FLAT LOUD TA AF AST

(1) AMERICA Press , No. 1 and No. 4 buttons at the same time. Set up completes displaying " AMERICA".

(2) SOUTH AMERICA Press , No. 2 and No. 5 buttons at the same time. Set up completes displaying " SOUTH".

(3) ASIA Press , No. 1 and No. 5 buttons at the same time. Set up completes displaying " ASIA".

(4) EUROPE Press power, No. 2 and No. 4 buttons at the same time. Set up completes displaying " EUROP".

PRESET

7807A3CD16

14) REMOTE CONTROLLER

1

2

4

6

3

5

7 4507A3CD90

(1) Power ON/OFF button Η Press to switch ON the set. Press switch OFF the set.

4507A3CD81

(2) Volume button(up) ÂShort press : Volume up one step ÂLong press : Volume up continuous

4507A3CD82

3-30

for more than 2seconds to

(3) Volume button(down) ÂShort press : Volume down one step ÂLong press : Volume down continuous.

4507A3CD83

(4) Source & mute button ÂShort press : Change source(Radio/CD) ÂLong press : To mute or cancel mute.

4507A3CD84

(5) Next button

4507A3CD85

Η Tuner mode ÂShort press : Preset up ÂLong press : Band up Θ Cassette mode ÂShort press : Reverse(before the end of the tape) ÂLong press : No function Ι CD mode ÂShort press : Track 1 ÂLong press : Scan track

(6) Search button(up)

4507A3CD86

Η Tuner mode ÂShort press : Search up one step ÂLong press : Search up continuous Θ Cassette & CD mode ÂShort press : Next track ÂLong press : Fast forward

(7) Search button(down)

4507A3CD87

Η Tuner mode ÂShort press : Search down one step ÂLong press : Search down continuous Θ Cassette & CD mode ÂShort press : Previous track ÂLong press : Fast rewind

3-31

OPERATION 1. SUGGESTION FOR NEW MACHINE 1) It takes about 100 operation hours to enhance its designed performance.

2) Operate according to below three steps and avoid excessive operation for the initial 100 hours.

Avoid excessive operation for initial 100 hours

Service meter

Load

Until 10 hours

About 60%

Until 100 hours

About 80%

After 100 hours

100%

ö Excessive operation may deteriorate the potential performance of machine and shorten lifetime of the machine.

3) Be careful during the initial 100 hours operation (1) Check daily for the level and leakage of coolant, engine oil, hydraulic oil and fuel.

(2) Check regularly the lubrication and fill grease daily all lubrication points.

(3) Tighten bolts.

(4) Warm up the machine fully before operation.

(5) Check the gauges occasionally during the operation.

(6) Check if the machine is operating normally during operation.

4) Replace followings after initial 50 hours of operation Checking items

Service

Engine oil Engine oil filter element Hydraulic oil return filter element Hydraulic oil tank drain filter cartridge

Replace

Line filter element Fuel filter

4-1

29074OP01

2. CHECK BEFORE STARTING THE ENGINE 1) Look around the machine and under the machine to check for loosen nut or bolts, collection of dirt, or leakage of oil, fuel or coolant and check the condition of the work equipment and hydraulic system. Check also loosen wiring, and collection of dust at places which reach high temperature. ö Refer to the daily check on the chapter 6, maintenance.

Do not retract the track gauge except transporting purpose.

2) Adjust seat to fit the contours of the operator's body for the pleasant operation.

3) Adjust the rear view mirror.

4-2

Check before starting

21074OP02

3. STARTING AND STOP THE ENGINE (up to #0057) 1) CHECK INDICATOR LIGHTS (1) Check if all the operating lever is on the neutral position.

(2) Turn the starting switch to the ON position, and check following. Η If all the lamps light ON and buzzer sounding for 2 seconds. Θ After lamp check CL : 2.0, the version of cluster program, is displayed on Monitoring display (3) for 5 seconds and the cluster returns to default. Ι Only below lamps will light ON and all the other lights will turn OFF after 2 seconds. ÂEngine oil pressure warning lamp(1) ÂBattery charging warning lamp(2)

45074OP03

2) STARTING ENGINE IN NORMAL TEMPERATURE ö Sound the horn to warn the surroundings after checking if personnel or obstacles are in the area.

(1) Turn the starting switch to START position to start the engine. ö If the engine does not start, allow the starter to cool for about 2 minutes before attempting to start the engine again.

(2) Release the starting switch instantly after the engine starts to avoid possible damage to the starting motor.

START ON

OFF

Electric box

Master switch NN CO DIS

2907A4OP01

4-3

3) STARTING ENGINE IN COLD WEATHER ö Sound horn to warn surroundings after checking if there are obstacles in the area. ö Replace the engine oil and fuel referring to recommended oils at page 2-30. ö Fill the anti-freeze solution to the coolant as required. ö If you turn ON the starting switch, the fuel warmer is automatically operated to heat the fuel by sensing the coolant temperature.

(1) Check if all the levers are in the neutral position.

(2) Turn the starting switch to ON position, and wait 1~2 minutes. More time may take according to ambient temperature.

(3) Press the preheat switch ON. (4) Start the engine by turning the starting switch to the START position after the preheat pilot lamp OFF. ö If the engine does not start, allow the starter to cool for about 2 minutes before attempting to start the engine again.

(5) Release the starting switch immediately after starting engine.

(6) The operation for the warming up machine is automatic.

Preheat switch ON

Preheat pilot lamp OFF

START ON

OFF

2507A4OP97A

4) INSPECTION AFTER ENGINE START Inspect and confirm the following after engine starts.

(1) Is the level gauge of hydraulic oil tank in the normal level?

(2) Are there leakages of oil or water?

(3) Are all the warning lamps OFF(1-7)?

(4) Is the indicator of water temperature gauge(8) and hydraulic temperature gauge(9) in the green zone?

(5) Is the engine sound and the color of exhaust gas normal?

(6) Are the sound and vibration normal? ö Do not increase engine speed quickly after starting, it can damage engine or turbocharger. ö If there are problems in the control panel, stop the engine immediately and correct problem as required.

4-4

45074OP04

5) WARMING-UP OPERATION ö The most suitable temperature for the hydraulic oil is about 50Á C (122Á F ). Á It can cause serious trouble in the hydraulic system by sudden operation when the hydraulic oil temperature is below 25Á Á C (77Á F ).

Then temperature must be raised to at least 25Á Á C (77Á F ) before starting work.

50Á 50CC

(1) Run the engine at low idling for 5 minutes.

(2) Speed up the idling and run the engine at midrange speed.

(3) Operate bucket lever for 5 minutes. ö Do not operate anything except bucket lever.

(4) Run the engine at the high speed and operate the bucket lever and arm lever for 5-10 minutes. ö Operate only the bucket lever and arm lever.

(5) This warming-up operation will be completed by operation of all cylinders several times, and operation of swing and traveling. ö Increase the warming-up operation during winter.

21074OP05

6) TO STOP THE ENGINE ö If the engine is abruptly stopped before it has cooled down, engine life may be greatly shortened. Consequently, do not abruptly stop the engine apart from an emergency. ö In particularly if the engine has overheated, do not abruptly stop it but run it at medium speed to allow it to cool gradually, then stop it.

Low idling for 5 minutes

(1) Down the bucket on the ground then put all the levers in the neutral position.

(2) Run the engine at low idling speed for about 5 minutes.

(3) Return the key of starting switch to the OFF position.

(4) Remove the key to prevent other people using the machine and LOCK safety lever.

(5) Lock the cab door.

START ON 21074OP04

4-5

3. STARTING AND STOP THE ENGINE (#0058 and up) 1) CHECK INDICATOR LIGHTS (1) Check if all the operating lever is on the neutral position.

(2) Turn the starting switch to the ON position, and check following. Η If all the lamps light ON and buzzer sounding for 2 seconds. Θ After lamp checkÖ1.00×, the version of cluster program, is displayed on ÖLCD(3)× for 5 seconds and the cluster returns to default. Ι Only below lamps will light ON and all the other lights will turn OFF after 2 seconds. ÂEngine oil pressure warning lamp(1) ÂBattery charging warning lamp(2)

START OFF

ON

3

1 2

2507A4OP75

2) STARTING ENGINE IN NORMAL TEMPERATURE ö Sound the horn to warn the surroundings after checking if personnel or obstacles are in the area.

(1) Turn the starting switch to START position to start the engine. ö If the engine does not start, allow the starter to cool for about 2 minutes before attempting to start the engine again.

(2) Release the starting switch instantly after the engine starts to avoid possible damage to the starting motor.

START ON

OFF

Electric box

Master switch NN CO DIS

2907A4OP01

4-5-1

3) STARTING ENGINE IN COLD WEATHER ö Sound horn to warn surroundings after checking if there are obstacles in the area. ö Replace the engine oil and fuel referring to recommended oils at page 2-30. ö Fill the anti-freeze solution to the coolant as required. ö If you turn ON the starting switch, the fuel warmer is automatically operated to heat the fuel by sensing the coolant temperature.

(1) Check if all the levers are in the neutral position.

(2) Turn the starting switch to ON position, and wait 1~2 minutes. More time may take according to ambient temperature.

(3) Press the preheat switch ON. (4) Start the engine by turning the starting switch to the START position after the preheat pilot lamp OFF. ö If the engine does not start, allow the starter to cool for about 2 minutes before attempting to start the engine again.

Preheat switch ON

Preheat pilot lamp OFF

START ON

OFF

(5) Release the starting switch immediately after starting engine.

(6) The operation for the warming up machine is automatic.

2507A4OP97A

4) INSPECTION AFTER ENGINE START Inspect and confirm the following after engine starts.

(1) Is the level gauge of hydraulic oil tank in the normal level?

(2) Are there leakages of oil or water?

(3) Are all the warning lamps OFF(1-8)?

(4) Is the indicator of water temperature gauge(9) and hydraulic temperature gauge(10) in the green zone?

(5) Is the engine sound and the color of exhaust gas normal?

(6) Are the sound and vibration normal? ö Do not increase engine speed quickly after starting, it can damage engine or turbocharger. ö If there are problems in the control panel, stop the engine immediately and correct problem as required.

4-5-2

1 10

9

2 3 4

8

5

6 7

2507A4OP76

5) WARMING-UP OPERATION ö The most suitable temperature for the hydraulic oil is about 50Á C (122Á F ). Á It can cause serious trouble in the hydraulic system by sudden operation when the hydraulic oil temperature is below 25Á Á C (77Á F ).

Then temperature must be raised to at least 25Á Á C (77Á F ) before starting work.

50 C

(1) Run the engine at low idling for 5 minutes.

(2) Speed up the idling and run the engine at midrange speed.

(3) Operate bucket lever for 5 minutes. ö Do not operate anything except bucket lever.

(4) Run the engine at the high speed and operate the bucket lever and arm lever for 5-10 minutes. ö Operate only the bucket lever and arm lever.

(5) This warming-up operation will be completed by operation of all cylinders several times, and operation of swing and traveling. ö Increase the warming-up operation during winter.

2507A4OP78

6) TO STOP THE ENGINE ö If the engine is abruptly stopped before it has cooled down, engine life may be greatly shortened. Consequently, do not abruptly stop the engine apart from an emergency. ö In particularly if the engine has overheated, do not abruptly stop it but run it at medium speed to allow it to cool gradually, then stop it.

Low idling for 5 minutes

(1) Down the bucket on the ground then put all the levers in the neutral position.

(2) Run the engine at low idling speed for about 5 minutes.

(3) Return the key of starting switch to the OFF position.

(4) Remove the key to prevent other people using the machine and LOCK safety lever.

START ON

(5) Lock the cab door.

21074OP04

4-5-3

4. MODE SELECTION SYSTEM (up to #0057) 1) STRUCTURE OF CAPO SYSTEM CAPO, Computer Aided Power Optimization system, is the name of mode selection system developed by Hyundai.

(1) Work mode 3 work modes can be selected for the optimal work speed of the machine operation. Η Heavy duty work mode The boom priority solenoid is activated to make the boom operation speed faster. Θ General work mode When key switch is turned ON, this mode is selected automatically and swing operation speed is faster than heavy duty work mode. Ι Breaker operation mode It sets the pump flow to the optimal operation of breaker by activating the max flow cut-off solenoid.

(2) Power mode Power mode designed for various work loads maintains high performance and reduces fuel consumption. ÂH mode : High power ÂS mode : Standard power (3) User mode ÂM : Maximam power ÂU : You can change the engine and pump power and memorize it for your preference

45074OP05

1 2 3 4 5 6

Work mode Power mode User mode Auto decel mode Travel mode Monitoring display

How to modulate the memory set Η Each memory mode has a initial set which are mid-range of max engine speed, auto decel rpm, and EPPR valve input current.

When you select U, cluster LCD displays.

140W7OP03G

4-6

Θ To change the engine high idle speed, press the USER mode switch and SELECT switch at the same time and then ACCEL blinks at 0.5 seconds interval.

- By pressing or switch, will increase or decrease. Ι To change DECEL rpm, press the USER mode switch and SELECT switch once more and then DECEL blinks at 0.5 seconds interval.

- By pressing or switch, will increase or decrease. Κ To change EPPR current, press the USER mode switch and SELECT switch once more and then EPPR blinks at 0.5 seconds interval.

- By pressing or switch, will increase or decrease. ÂLCD segment vs parameter setting Segment ( )

ACCEL (rpm)

DECEL (rpm)

EPPR (mA)

1

1400

Low idle(700)

150

2

1450

800

200

3

1500

850

250

4

1550

900

300

5

1600

950

350

6

1650

Decel rpm(1000)

400

7

1700

1050

450

8

1750

1100

500

9

1800

1150

550

10

1850

1200

600

Λ To memorize the final setting, press the USER mode switch and SELECT switch one more time.

(4) Auto decel mode Engine quick deceleration.

(5) Travel mode : Low speed traveling. : High speed traveling.

4-7

45074OP06

(6) Monitoring system Information of machine performance as monitored by the MCU controller can be displayed on the monitoring display. ö Refer to 4-11 page for details.

(7) Self diagnostic system Η MCU controller The MCU controller diagnoses problems in the CAPO system caused by electric parts' malfunction and by open or short circuit, which are displayed on the monitoring display as error codes(2digit). ö Consult hyundai or hyundai dealer for details.

MCU Controller

Θ Engine controller(ECM) If the engine or relevant system has problem, ECM diagnoses and displays on the monitoring display as fault codes(3digit). ö Consult hyundai or hyundai dealer for details.

(8) Anti-restart system The system protects the starter from inadvertent restarting after the engine is already operational.

45074OP03M

2) HOW TO OPERATE MODE SELECTION SYSTEM (1) When start key is turned ON Η When start key is turned ON, all illumination lamps are ON and all lamps are OFF automatically after 5 seconds. But the battery charging warning lamp and the engine oil pressure warning lamp keep turned ON until engine starting. Θ After lamp check CL : 2.0, the version of cluster program, is displayed on Monitoring display for 2 seconds. Ι After the version of program is displayed, the cluster returns to default. Exactly engine rpm, battery charging warning lamp and engine oil pressure warning lamp are turned ON and S mode, auto decel, low travel speed(Turtle mark) are displayed. Κ In default condition self-diagnostic function including trouble detecting of electric system can be carried out. ö Refer to 4-11 page for details.

4-8

50074OP03D

(2) After engine start Η When the engine is started, three lamps are ON as below.

Mode

Status

Work mode

ON

Power mode Travel mode

ON

S Low(

)

Auto decel mode

ON ON

ÂIn this condition, tachometer indicates low idle, 700Ü100rpm. ÂIf coolant temperature is below 30Á C , after 10 seconds the engine speed increases to 950 Ü100rpm automatically to warm up the machine. ÂAfter 2-3 minutes, you can select any mode depending on job requirement. Θ Self-diagnostic function can be carried out the same as start key is ON. ö Refer to 4-11 page for details.

4507AOP03

3) SELECTION OF POWER MODE (1) S mode When the accel dial is at setting 10 and auto decel mode is cancelled and S mode is selected.

Engine rpm 1750 Ü 50

Effect Same power as non mode type machine.

ö When the accel dial is located below 9 the engine speed decreases about 50~100rpm per dial set.

21073CD23A

(2) H mode When the accel dial is at setting 10 and auto decel mode is cancelled and H mode is selected.

Engine rpm

1850 Ü 50

Effect Approximately 110% of power and speed available than non mode type machine or S mode.

ö When the accel dial is located below 9 the engine speed decreases about 50~100rpm per dial set.

4-9

21073CD23B

(3) M mode When the accel dial is at setting 10 and auto decel mode is cancelled and H mode is selected.

Engine rpm

1850 Ü 50

Effect Approximately 130% of power and speed available than non mode type machine or S mode.

ö When the accel dial is located below 9 the engine speed decreases about 50~100rpm per dial set.

4-10

17W73CD21

4) MONITORING DISPLAY Information of machine performance as monitored by the MCU controller can be displayed on the cluster when the operator selects a display mode by touching SELECT switch alone or with BUZZER STOP switch on the cluster as below.

Display group

How to select display mode Group selection

Way 1 Key switch ON or START Group 0 (Default)

Name

Display mode selection Initial

Engine rpm

Touch SELECT 1 time

Time

Touch SELECT 2 times

Power shift pressure (EPPR valve)

Way 2 Touch AUTO DECEL Touch SELECT 3 times switch while pressing Touch SELECT BUZZER STOP at 4 times Option group 1~4.

(Only when Touch SELECT a pressure 5 times sensor is Touch SELECT installed) 6 times

MCU model & version Front pump pressure Rear pump pressure Pilot pressure

Default

Battery voltage(V)

Touch SELECT 1 time

Potentiometer voltage(V)

Touch SELECT switch

Group 1 once while pressing Touch SELECT 2 times (Volt, temp, BUZZER STOP. EPPR press, In this group SELECT Touch SELECT 3 times version) LED ON Touch SELECT 4 times Touch SELECT 5 times Touch SELECT switch Default twice while pressing Group 2 BUZZER STOP. Touch SELECT 1 time (Error code) In this group BUZZER Press down( ) & STOP LED blinks SELECT at the same time

Accel dial voltage(V) Hydraulic oil temperature(Á C) Coolant temperature(Á C) Ambient pressure(kPA) Current error Recorded error (Only key switch ON) Recorded error deletion (Only key switch ON)

Default

Pump prolix switch

Touch SELECT 1 time

Auto decel pressure switch

Touch SELECT switch 3 times while press- Touch SELECT 2 times Group 3 ing BUZZER STOP. (Switch input) In this group SELECT Touch SELECT 3 times LED blinks at 0.5sec Touch SELECT 4 times interval

Power boost switch Travel oil pressure switch One touch decel switch

Touch SELECT 5 times

Travel alarm switch

Touch SELECT 6 times

Preheat switch

4-11

Display on the cluster

Display group

Group 4 (Output)

How to select display mode Group selection

Display mode selection

Name

Default

Hourmeter

Touch SELECT 1 time

Neutral relay (Anti-restart relay)

Touch SELECT 2 times Touch SELECT switch 4 times while pressing Touch SELECT 3 times BUZZER STOP. In this group SELECT LED blinks at 1sec Touch SELECT 4 times interval Touch SELECT 5 times

Travel speed solenoid Power boost solenoid (2-stage relief solenoid) Boom priority solenoid Travel alarm

Touch SELECT 6 times

Max flow cut off solenoid

Touch SELECT 7 times

Preheat relay

öBy touching SELECT switch once while pressing BUZZER STOP, display group shifts.

Example : Group 0 1 2 3 4 0

4-12

Display on the cluster

4. MODE SELECTION SYSTEM (#0058 and up) 1) STRUCTURE OF CAPO SYSTEM CAPO, Computer Aided Power Optimization system, is the name of mode selection system developed by Hyundai.

(1) Work mode 3 work modes can be selected for the optimal work speed of the machine operation. Η Heavy duty work mode The boom priority solenoid is activated to make the boom operation speed faster. Θ General work mode When key switch is turned ON, this mode is selected automatically and swing operation speed is faster than heavy duty work mode. Ι Breaker operation mode It sets the pump flow to the optimal operation of breaker by activating the max flow cut-off solenoid.

(2) Power mode Power mode designed for various work loads maintains high performance and reduces fuel consumption. ÂH mode : High power ÂS mode : Standard power (3) User mode ÂM : Maximum power ÂU : You can change the engine and pump power and memorize it for your preference

6

2

1

5

3 4

2507A4OP04

1 2 3 4 5 6

Work mode Power mode User mode Auto decel mode Travel mode LCD

How to modulate the memory set Η Each memory mode has a initial set which are mid-range of max engine speed, auto decel rpm, and EPPR valve input current.

ACCEL DECEL EPPR

2507A4OP08

4-12-1

Θ High idle rpm, auto decel rpm, EPPR pressure can be modulated and memorized separately in the U-mode. ö Refer to the page 3-8 for set of user mode. ÂLCD segment vs parameter setting Segment ( )

ACCEL (rpm)

DECEL (rpm)

EPPR (mA)

1

1400

Low idle(700)

150

2

1450

800

200

3

1500

850

250

4

1550

900

300

5

1600

950

350

6

1650

Decel rpm(1000)

400

7

1700

1050

450

8

1750

1100

500

9

1800

1150

550

10

1850

1200

600

SYSTEM MENU

Monitoring

Diagnosis

Management

Settings

Display

User Mode

User mode icon

ACCEL DECEL EPPR

(4) Auto decel mode Engine quick deceleration.

(5) Travel mode : Low speed traveling. : High speed traveling.

2507A4OP05

4-12-2

(6) Monitoring system Information of machine performance as monitored by the MCU controller can be displayed on the LCD. Refer to the page 3-5.

(7) Self diagnostic system MCU controller The MCU controller diagnoses problems in the CAPO system caused by electric parts' malfunction and by open or short circuit, which are displayed on the LCD as error codes(2 digit).

Engine controller(ECU) If the engine or relevant system has problem ECU diagnoses and displays on the LCD as fault codes(3 digit or more).

Consult hyundai or huyndai dealer for details.

Refer to the page 3-8-4 for LCD display.

LCD

SYSTEM MENU

Monitoring

Diagnosis

Management

Settings

Display

User Mode

Engine controller unit(ECU)

Electric box MCU Controller

(8) Anti-restart system The system protects the starter from inadvertent restarting after the engine is already operational.

2507A4OP06B/45074OP03M

2) HOW TO OPERATE MODE SELECTION SYSTEM (1) When start key is turned ON When start key is turned ON, all illumination lamps are ON and all lamps are OFF automatically after 5 seconds. But a battery charging warning lamp and an engine oil pressure warning lamp keep turned ON until engine starting.

After lamp check 1.00 , the version of cluster program, is displayed on LCD for 2 seconds.

After the version of program is displayed, the cluster returns to default. Exactly engine rpm, battery charging warning lamp and engine oil pressure warning lamp are turned ON and S mode, auto decel, low travel speed(Turtle mark) are displayed.

In default condition self-diagnostic function including trouble detecting of electric system can be carried out.

LCD

2507A4OP77

4-12-3

(2) After engine start Η When the engine is started, three lamps are ON as below.

Mode

Status

Work mode

ON

Power mode Travel mode

ON

S Low(

)

Auto decel mode

ON ON

ÂIn this condition, tachometer indicates low idle, 850Ü100rpm. ÂIf coolant temperature is below 30Á C, after 10 seconds the engine speed increases to 1000 Ü100rpm automatically to warm up the machine. ÂAfter 2-3 minutes, you can select any mode depending on job requirement. Θ Self-diagnostic function can be carried out the same as start key is ON. ö Refer to the page 3-6 for details.

2507A4OP07

3) SELECTION OF POWER MODE (1) S mode When the accel dial is at setting 10 and auto decel mode is cancelled and S mode is selected.

Engine rpm 1750 Ü 50

Effect Same power as non mode type machine.

ö When the accel dial is located below 9 the engine speed decreases about 50~100rpm per dial set.

21073CD23A

(2) H mode When the accel dial is at setting 10 and auto decel mode is cancelled and H mode is selected.

Engine rpm

1850 Ü 50

Effect Approximately 110% of power and speed available than non mode type machine or S mode.

ö When the accel dial is located below 9 the engine speed decreases about 50~100rpm per dial set.

4-12-4

21073CD23B

(3) M mode When the accel dial is at setting 10 and auto decel mode is cancelled and H mode is selected.

Engine rpm

1850 Ü 50

Effect Approximately 130% of power and speed available than non mode type machine or S mode.

ö When the accel dial is located below 9 the engine speed decreases about 50~100rpm per dial set.

4-12-5

17W73CD21

5. OPERATION OF WORKING DEVICE ö Confirm the operation of control lever and working device.

1) Left control lever controls arm and swing.

2) Right control lever controls boom and bucket.

7 6 5 8

3) When you release the control lever, control lever returns to neutral position automatically.

32 1 4

ö When operating swing, consider the swing distance by inertia.

2107A4OP06A

ö Left control lever 1 Arm roll-out 2 Arm roll-in 3 Swing right 4 Swing left

3

1

4 2

21074OP07

ö Right control lever 5 Boom lower 6 Boom raise 7 Bucket roll-out 8 Bucket roll-in

6

7 5 8

21074OP08

4-13

6. TRAVELING OF THE MACHINE 1) BASIC OPERATION Traveling position

(1) Traveling position It is the position which the traveling motor is in the rear and the working device is forward.

Be careful as the traveling direction will be reversed when the whole machine is swinged 180 degree (2) Traveling operation It is possible to travel by either travel lever or pedal. ö Do not travel continuously for a long time. ö Reduce the engine speed and travel at a low speed when traveling on uneven ground.

Travel motor

21074OP09

(3) Forward and backward traveling When the left and right travel lever or pedal are pushed at the same time, the machine will travel forward or backward. ö The speed can be controlled by the operation stroke of lever or pedal and change of direction will be controlled by difference of the left and right stroke.

21074OP10

(4) Pivot turning Operating only one side of lever or pedal make the change of direction possible by moving only one track.

21074OP11

(5) Counter rotation It is to change the direction at the original place by moving the right and left track. Both side of lever or pedal are operated to the other way at the same time.

21074OP12

4-14

2) TRAVELING ON A SLOPE (1) Make sure that the travel lever is properly maneuvered by confirming the travel motor is in the right location.

(2) Lower the bucket 20 to 30cm(1ft) to the ground so that it can be used as a brake in an emergency.

(3) If the machine starts to slide or loses stability, lower the bucket immediately and brake the machine.

20~

30c

m(1

ft)

Travel motor

(4) When parking on a slope, use the bucket as a brake and place blocks behind the tracks to prevent sliding. ö Machine cannot travel effectively on a slope when the oil temperature is low. Do the warming-up operation when it is going to travel on a slope.

Be careful when working on slopes. It may cause the machine to lose its balance and turn over.

Be sure to keep the travel speed switch on the LOW(Turtle mark) while traveling on a slope.

Travel motor

20~30cm(1ft)

21074OP13

3) TRAVELING ON SOFT GROUND ö If possible, avoid to operate on soft ground.

(1) Move forward as far as machine can move.

(2) Take care not to go beyond the depth where towing is impossible on soft ground.

(3) When driving becomes impossible, lower bucket and use boom and arm to pull the machine.

Operate boom, arm, and travel lever at the same time to avoid the machine sinking.

4-15

90 ~ 110

21074OP14

4) TOWING THE MACHINE Tow the machine as follows when it can not move on it's own.

(1) Tow the machine by other machine after hook the wire rope to the frame as shown in figure at right.

(2) Hook the wire rope to the frame and put a support under each part of wire rope to prevent damage. ö Never tow the machine using only the tie hole, because this may break.

Make sure no personnel are standing close to the tow rope.

21074OP14A

4-16

7. EFFICIENT WORKING METHOD 1) Do the digging work by arm.

Use the pulling force of arm for digging and use together with the digging force of the bucket if necessary.

21074OP15

2) When lowering and raising the boom operate softly for the beginning and the end.

In particularly, sudden stops while lowering the boom may cause damage to the machine.

Operate softy for the begining and the end

21074OP16

3) The digging resistance and wearing of tooth can be reduced by putting the end of bucket tooth to the digging direction.

13034OP39

4) Set the tracks parallel to the line of the ditch to be excavated when digging ditch. Do not swing while digging.

Parallel

21074OP17

4-17

5) Dig slowly with keeping the angle of boom and arm, 90-110 degree when maximum digging force is required.

90~110

21074OP18

6) Operate leaving a small safety margin of cylinder stroke to prevent damage of cylinder when working with the machine.

Margin

21074OP19

7) Keep the bucket to the dumping position and the arm horizontal when dumping the soil from the bucket.

Operate bucket lever 2 or 3 times when hard to dump. ö Do not use the impact of bucket tooth when dumping.

21074OP20

8) Operate stop of swing considering the swing slip distance is created by inertia after neutralizing the swing lever.

Inertia

Swing stop 21074OP21

4-18

9) Do not use the dropping force of the work equipment for digging.

The machine can be damaged by the impact.

Incorrect

21074OP22

10) Do not use the bucket to crack hard objects like concrete or rocks.

This may break a tooth or pin, or bend boom.

Incorrect

21074OP23

11) NEVER CARRY OUT EXCESSIVE OPERATIONS Operation exceeding machine performance may result in accident or failure.

Carry out lifting operation within specified load limit.

Never carry out operations which may damage the machine such as overload or over-impact-load.

Never travel while carrying a load.

In case you need installing over load warning device for object handling procedure, please contact Hyundai distributor.

Incorrect

Incorrect

29074OP35

4-19

12) BUCKET WITH HOOK When carrying out lifting work, the special lifting hook is necessary.

The following operations are prohibited. ÂLifting loads with a wire rope fitted around the bucket teeth. ÂLifting loads with the wire rope wrapped directly around the boom or arm.

Hook

When performing lifting operation, securely hook the wire rope onto the special lifting hook.

When performing lifting operation, never raise or lower a person.

Due to the possible danger of the load falling or of collision with the load, no persons shall be allowed in the working area.

Before performing lifting operation, designate an operation supervisor.

Always execute operation according to his instructions. ÂExecute operating methods and procedures under his direction. ÂSelect a person responsible for signaling.

Operate only on signals given by such person.

Never leave the operator's seat while lifting a load.

4-20

21074OP24

8. OPERATION IN THE SPECIAL WORK SITES 1) OPERATION THE MACHINE IN A COLD WEATHER (1) Use proper engine oil and fuel for the weather.

(2) Fill the required amount of antifreeze in the coolant.

50Á 5 C

(3) Refer to the starting engine in cold weather.

Start the engine and extend the warming up operation.

(4) Be sure to open the heater cock when using the heater.

(5) Always keep the battery completely charged. ö Discharged batterys will freeze more easily than fully charged.

(6) Clean the machine and park on the wood plates.

2) OPERATION IN SANDY OR DUSTY WORK SITES (1) Inspect air cleaner element frequently. Clean or replace element more frequently, if warning lamp comes ON and buzzer sounds simultaneously, regardless of inspection period. ö Replace the inner and outer element after 6 times of cleaning.

(2) Inspect radiator frequently, and keep cooling fins clean.

(3) Prevent sand or dust from getting into fuel tank and hydraulic tank during refilling.

(4) Prevent sand or dust from penetrating into hydraulic circuit by tightly closing breather cap of hydraulic oil tank. Replace hydraulic oil filter frequently.

(5) Keep all lubricated part, such as pins and bushings, clean at all times.

(6) If the air conditioner and heater filters clogged, the heating or cooling capacity will drop. Clean or replace the filter element more frequently.

4-21

21074OP29

3) SEA SHORE OPERATION (1) Prevent ingress of salt by securely tightening plugs, cocks and bolts of each part.

(2) Wash machine after operation to remove salt residue.

Pay special attention to electrical parts and hydraulic cylinders to prevent corrosion.

(3) Inspection and lubrication must be carried out more frequently.

Supply sufficient grease to replace all old grease in bearings which have been submerged in water for a long time.

4-22

9. NORMAL OPERATION OF EXCAVATOR Followings may occur during operation due to the nature of a hydraulic excavator.

1) When rolling in the arm, the roll-in movement stop momentary at point X in the picture shown, then recovers speed again after passing point X. The reason for this phenomenon is that movement by the arm weight is faster than the speed of oil flow into the cylinder.

2) When lowering the boom, one may hear continuous sound.

This is caused by oil flow in the valve.

X

3) Overloaded movement will produce sound caused by the relief valves, which are for the protection of the hydraulic systems.

4) When the machine is started swing or stopped, a noise near the swing motor may be heard. The noise is generated when the brake valve relieves.

4-23

21074OP25

10. ATTACHMENT LOWERING(When engine is stopped) 1) On machines equipped with an accumulator, for a short time(within 2 minutes) after the engine is stopped, the attachment will lower under its own weight when the attachment control lever is shifted to LOWER. That is happen only starting switch ON position and safety lever UNLOCK position.

After the engine is stopped, set the safety lever to the LOCK position.

Be sure no one is under or near the attachment before lowering the boom.

2) The accumulator is filled with high-pressure nitrogen gas, and it is extremely dangerous if it is handled in the wrong way. Always observe the following precautions.

Never make any hole in the accumulator expose it to flame or fire.

Do not weld anything to the accumulator. ö When carrying out disassembly or maintenance of the accumulator, or when disposing of the accumulator, it is necessary to release the gas from the accumulator. A special air bleed valve is necessary for this operation, so please contact your Hyundai distributor.

Accumulator

29074OP25

4-24

11. STORAGE Maintain the machine taking care of following to prevent the deterioration of machine when storing the machine for a long time, over 1 month.

1) CLEANING THE MACHINE Clean the machine. Check and adjust tracks.

Grease each lubrication part.

1

4 3

2) LUBRICATION POSITION OF EACH PART Change all oil. ö Be particularly careful when you reuse the machine.

As oil can be diluted during storage.

Apply an anticorrosive lubricant on the exposed part of piston rod of cylinder and in places where the machine rusts easily.

5 1 2 3 4 5

2

Lubricating manifold(5EA) Boom cylinder pin(2EA) Boom and arm connection pin(1EA) Arm cylinder pin(rod side, 1EA) Arm and bucket(7EA) 21074OP26

3) MASTER SWITCH Turn OFF the master switch mounted electric box and store the machine.

4) Be sure to mix anticorrosive antifreezing solution in the radiator.

Electric box

Master switch OFF

29074OP30

5) PREVENTION OF DUST AND MOISTURE Keep machine dry. Store the machine setting wood on the ground. ö Cover exposed part of piston rod of cylinder. ö Lower the bucket to the ground and set a support under track.

21074OP27

4-25

6) DURING STORAGE Start engine and move the machine and work equipment once a month and apply lubrication to each part. ö Check the level of engine oil and coolant and fill if required when starting engine. ö Clean the anticorrosive on the piston rod of cylinder. ö Operate the machine such as traveling, swing and work equipment operation to make sure enough lubrication of all functional components.

Lubricating operation once a month

21074OP30

4-26

12. RCV LEVER OPERATING PATTERN

⚰ Whenever a change is made to the machine control puttern also exchange the pattern label in the cab to match the new pattern.

36074OP28

Operation Pattern ISO Type

Left

Right

➕

➙

➘

Hyundai

➗

➜

➖ ➕

A Type ➘

B Type

➚ ➙ ➗

➜

➖

➚

➕

➙

➘

➗

➜

➖ ➕

C Type ➘

➚ ➙

➗

➜

Control function ➕ Arm out ➖ Arm in Left ➗ Swing right ➛ ➘ Swing left ➙ Boom lower ➚ Boom raise Right ➛ Bucket out ➜ Bucket in ➕ Boom lower ➖ Boom raise Left ➗ Swing right ➛ ➘ Swing left ➙ Arm out ➚ Arm in Right ➛ Bucket out ➜ Bucket in ➕ Boom lower ➖ Boom raise Left ➗ Bucket in ➛ ➘ Bucket out ➙ Arm out ➚ Arm in Right ➛ Swing right ➜ Swing left

⯱ Loosen the RCV lever mounting bolt(21) and rotates lever assy 90♻counterclockwise; then install.

Left ⯲ To put lever in correct position, disassemble ➛ nut(20) and rotates only lever 90♻clockwise.

Right ➖

Hose connection(Port) Change of MCV port RCV lever From To D ⯲ E ⯴ A ⯳ B ⯱ J ⯴ H ⯲ F ⯱ G ⯳ D J ⯲ E H ⯴ A ⯳ B ⯱ ⯴ D J ⯲ E H ⯱ F ⯳ G ⯲ J D ⯴ H E ⯳ G A ⯱ F B ⯴ D J ⯲ E H ⯱ A F ⯳ B G

➚

4-1

Same as ISO type

13. SWITCHING HYDRAULIC ATTACHMENT CIRCUIT 1) The combined hydraulic attachment circuit is capable of providing single action or double action.

2) The position of 3 way valve selects the single action hydraulic attachment circuit or the double action hydraulic attachment circuit.

3) Before you change the flow mode of hydraulic attachment circuit, place the machine in the servicing position as shown. Stop the engine.

29074OP04

4) Use the manual lever to turn the 3 way valve.

Make sure that you fully turn the valve until the valve stops.

(1) One way flow(Hydraulic breaker) Position the manual lever parallel to the piping ( ).

(2) Two way flow(Clamshell or shear) Position the manual lever perpendicular to the piping( ).

4-28

B

FRONT

C

29074OP36

TRANSPORTATION 1. PREPARATION FOR TRANSPORTATION 1) When transporting the machine, observe the various road rules, road transportation vehicle laws and vehicle limit ordinances, etc.

Overall width

2) Select proper trailer after confirming the weight and dimension from the chapter 2, specification.

3) Check the whole route such as the road width, the height of bridge and limit of weight and etc., which will be passed.

4) Get the permission from the related authority if necessary.

Overall height

Overall length

5) Prepare suitable capacity of trailer to support the machine.

21075TA01

6) Prepare gangplank for safe loading referring to the below table and illustration.

A

B

1.0

3.65 ~ 3.85

1.1

4.00 ~ 4.25

1.2

4.35 ~ 4.60

1.3

4.75 ~ 5.00

1.4

5.10 ~ 5.40

1.5

5.50 ~ 5.75

Loading plate of trailer

B Gan gpla nk

A Block

15 ~ 16。

13035TA02

5-1

2. DIMENSION AND WEIGHT 1) BASE MACHINE Mark

Description

Unit

Specification

L

Length

mm(ft-in)

6190(20' 4")

H

Height

mm(ft-in)

3390(11' 1")

W

Width

mm(ft-in)

2990( 9'10")

Wt

Weight

kg(lb)

29540(65120)

※ With 600mm(24") triple grouser shoes. ※ Remove cakewalk for transport.

500075TA07

Mark

Description

Unit

Specification

L

Length

mm(ft-in)

7290(23'11")

H

Height

mm(ft-in)

1710( 5' 7")

W

Width

mm(ft-in)

830( 2' 9")

Wt

Weight

kg(lb)

4180(9220)

H

2) BOOM ASSEMBLY

L

※ 7.06m(23' 2") boom with arm cylinder(Included piping and pins).

13035TA03

Mark

Description

Unit

Specification

L

Length

mm(ft-in)

4660(15' 3")

H

Height

mm(ft-in)

1060( 3' 6")

W

Width

mm(ft-in)

620( 2' 0")

Wt

Weight

kg(lb)

2540(5600)

H

3) ARM ASSEMBLY

L

※ 3.38m(11' 1") arm with bucket cylinder(Included linkage and pins).

13035TA04

Mark

Description

Unit

Specification

L

Length

mm(ft-in)

2090( 6'10")

H

Height

mm(ft-in)

1240( 4' 1")

W

Width

mm(ft-in)

1760( 5' 6")

Weight

kg(lb)

1620(3570)

Wt

※ 2.15m (2.81yd ) SAE heaped bucket(Included tooth and side cutters).

3

H

4) BUCKET ASSEMBLY

L

3

5-2

13035TA05

Mark

Description

Unit

Specification

L

Length

mm(ft-in)

2445( 8' 0")

H

Height

mm(ft-in)

326( 1' 1")

W

Width

mm(ft-in)

436( 1' 5")

Wt

Weight(2EA)

kg(lb)

370(820)

H

5) BOOM CYLINDER

L

※ Included piping.

13035TA06

6) CAB ASSEMBLY Description

Unit

Specification

L

Length

mm(ft-in)

1962( 6' 4")

H

Height

mm(ft-in)

1676( 5' 5")

W

Width

mm(ft-in)

1288( 4' 3")

Wt

Weight

kg(lb)

310(680)

H

Mark

L

W 21075TA03

Mark

Description

Unit

Specification

L

Length

mm(ft-in)

2980( 9' 9")

H

Height

mm(ft-in)

1050( 3' 5")

W

Width

mm(ft-in)

768( 2' 6")

Wt

Weight

kg(lb)

10200(22490)

H

7) COUNTERWEIGHT

L

W

21075TA04

Mark

Description

Unit

Specification

L

Length

mm(ft-in)

2980( 9' 9")

H

Height

mm(ft-in)

1050( 3' 5")

W

Width

mm(ft-in)

768( 2' 6")

Wt

Weight

kg(lb)

10700(23590)

H

8) COUNTERWEIGHT(OPTION)

L

W

※ 9.0m Boom, 5.85m Arm only 21075TA04

5-3

Mark

Description

Unit

Specification

L

Length

mm(ft-in)

6780(22' 3")

H

Height

mm(ft-in)

1840( 6' 0")

W

Width

mm(ft-in)

830( 2' 9")

Wt

Weight

kg(lb)

4050(8930)

H

9) BOOM ASSEMBLY(OPTION)

L

※ 6.55m(21' 6") boom with arm cylinder(Included piping and pins).

13035TA03

Mark

Description

Unit

Specification

L

Length

mm(ft-in)

9230(30' 3")

H

Height

mm(ft-in)

1850( 6' 1")

W

Width

mm(ft-in)

830( 2' 9")

Wt

Weight

kg(lb)

4950(10910)

H

10) BOOM ASSEMBLY(OPTION)

L

※ 9.00m(29' 6") boom with arm cylinder(Included piping and pins).

13035TA03

Mark

Description

Unit

Specification

L

Length

mm(ft-in)

3810(12' 6")

H

Height

mm(ft-in)

1205( 3'11")

W

Width

mm(ft-in)

620( 2' 0")

Wt

Weight

kg(lb)

2440(5380)

H

11) ARM ASSEMBLY(OPTION)

L

※ 2.4m( 7'10") arm with bucket cylinder(Included linkage and pins).

13035TA04

Mark

Description

Unit

Specification

L

Length

mm(ft-in)

7100(23' 4")

H

Height

mm(ft-in)

1055( 3' 6")

W

Width

mm(ft-in)

620( 2' 0")

Wt

Weight

kg(lb)

3150(6940)

H

12) ARM ASSEMBLY(OPTION)

L

※ 5.85m(19' 2") arm with bucket cylinder(Included linkage and pins).

13035TA04

5-4

3. DISASSEMBLING FOR TRANSPORTATION 1) DISCONNECTING HYDRAULIC HOSES AND LINES (1) Position the machine on flat, firm and level ground.

(2) Retract the bucket cylinder and arm cylinder completely.

(3) Lower the boom to the ground as shown.

(4) Stop the engine.

(5) Move the safety lever down to lock the system securely. ※ Refer to the page 3-14 for details.

(6) Turn the engine start switch to ON position.

Do not start the engine.

21076MA02

(7) Pull up the safety lever, Move the left and right operating levers, respectively to the full extension in all directions to remove internal pressure from the hydraulic circuits.

(8) Turn the star switch to OFF position.

(9) Release internal pressure in the hydraulic tank through the air breather of the hydraulic tank.

(10)Disconnect hoses and lines. ※ Treat oil in an environmentally safe way.

(11)Dismantle the components(boom, arm, counterweight etc.)

Immediately after operating the machine, the hot hydraulic oil can cause severe burns to unprotected skin.

These may be residual hydraulic pressure can remain in the hydraulic system.

Serious injury may result if this residual pressure is not released before any service is done on the hydraulic system.

5-5

2) DISASSEMBLING ATTACHMENT ※ Follow the disconnecting hydraulic hoses and lines procedure before disassemble the components.

(1) Bucket and arm with bucket cylinder Use cable sheaths to protect the lifting cable from being damaged by the edges of the arm.

Protect piston rod and the cylinder tube.

Rod

Sheath 50075TA08

(2) Boom with arm cylinder Use cable sheaths to protect the lifting cable from being damaged by the edges of the boom.

Secure piston rod of the arm cylinder to the cylinder tube.

Sheath

50075TA09

5-6

3) COUNTERWEIGHT REMOVAL AND INSTALLATION (1) Counterweight removal ① Position the machine on flat, firm and level ground, free from any obstruction or interference. ② Keep the service position. ③ Push down the safety locking lever securely.

Move the safety lever down to lock the system securely. ※ Refer to the page 3-14 for details.

Bolt

④ As shown in the illustration, connect the lifting cables or slings with sufficient strength for the counterweight at the lifting eye correctly. ⑤ Disassemble four bolts.

50075TA10

⑥ Lift the counterweight enough. ⑦ Place the counterweight onto suitable support.

(2) Counterweight installation ① Carry out installation in the reverse order to removal. ·Tightening torque : 390±40kgf·m(280±290lbf·ft) Move the safety locking lever down to lock the system securely, See safety locking system on page 3-14. And attach a warning tag(Do not start the engine) to the left operating lever.

Personal injury or death can occur from a counterweight falling during installation.

Do not allow personnel under or around the counterweight during installation.

Use certified cables and shackles of adequate load rating. Improper lifting can allow the load to shift and cause injury or death.

5-7

4. LOADING THE MACHINE 1) Load and unload the machine on a flat ground.

2) Use the gangplank with sufficient length, width, thickness and gradient.

3) Place the swing lock lever to the LOCK position before fixing the machine at the bed of trailer and confirm if the machine parallels the bed of trailer.

Keep the travel motor in the rear when loading and in the front when unloading.

21075TA05

4) Do the following after loading the machine to the trailer.

(1) Stop loading when the machine is located horizontally with the rear wheel of trailer.

21075TA06

(2) Place the swing lock lever to the LOCK position after the swing the machine 180 degree.

21075TA07

5-8

(3) Lower the working equipment gently after the location is determined. ※ Place rectangular timber under the bucket cylinder to prevent the damage of it during transportation.

Be sure to keep the travel speed switch on the LOW(Turtle mark) while loading and unloading the machine.

Avoid using the working equipment for loading and unloading since it will be very dangerous.

Do not operate any other device when loading.

Be careful on the boundary place of loading plate or trailer as the balance of machine will abruptly be changed on the point.

5-9

21075TA08

5. FIXING THE MACHINE 1) Lower down the working device on the loading plate of trailer.

2) Keep the safety lever on the LOCK position.

3) Turn OFF all the switches and remove the key.

50075TA11

4) Secure all locks.

Tool box & fuel tank Engine hood

Cab

Side cover 21075TA10

5) Place timber underneath of the track and fix firmly with wire rope to prevent the machine from moving forward, backward, right or left.

Chain

21075TA11

5-10

6. LOADING AND UNLOADING BY CRANE 1) Check the weight, length, width and height of the machine referring to the chapter 2, specification when you are going to hoist the machine.

Wire rope Stay

2) Use long wire rope and stay to keep the distance with the machine as it should avoid touching with the machine.

3) Put a rubber plate contact with wire rope and machine to prevent damage.

0.5~1.0m

Between track roller Between track roller and sprocket No.1 and No.2

4) Place crane on the proper place.

5) Install the wire rope and stay like the illustration.

Make sure wire rope is proper size.

Place the swing lock lever and safety lever to LOCK position to prevent the machine moving when hoisting the machine.

The wrong hoisting method or installation of wire rope can cause damage to the machine.

Do not load abruptly.

Keep area clear of personnel.

5-11

Wire rope Stay

REAR VIEW 21075TA12

7. ADJUSTABLE TRACK GAUGE 1) LOWER TRACK RETRACTION Do not retract the track gauge except transporting purpose.

(1) Remove nine bolts(1), and spacers from lower track(2) to the retracted. ※ Do not loosen two bolts(3) on guide(4).

2

5

1

3 4

50075TA01

(2) Turn superstructure so that it is perpendicular to lower track to be retracted. Raise lower track to approximately 15degree from ground using a jack. Lower track should slide by its own weight and hit against the stop. ※ If lower track does not slide in this condition, allow lower track that is not contraction ground to move back and forth slowly.

The arm must be set at 90~110degree.

Never set it at an angle less than 90degree.

(3) After lower track(2) has slid into place, lower superstructure to ground.

Install six spacers and bolts(1). ※ Tighten bolts to 220±20kgf·m(1590±145lbf·ft) ※ Repeat procedure at opposite side center frame support.

90 ~ 110 15

50075TA04

2

1

(4) After the bolts for one side frame are fastened, repeat steps 1 thru 3 for opposite side frame.

(5) Store remaining bolts, spacers with machine.

5-12

50075TA02

1) FRAME EXTENSION (1) Remove six bolts(1), and spacers from lower track(2) to be extended. ※ Do not loosen two bolts(3) on guide(4).

5 2

1 3 4

50075TA03

(2) Turn superstructure so that it is perpendicular to lower track to be extended. ※ Do not attach cable on side frame step.

(3) Attach one end of cable on arm and the other end on lower track.

Connect it with an appropriate holding device on both ends.

(4) Raise lower track slightly with jack and block.

Extend arm gradually to side frame out until it hits stop.

50075TA05

(5) After lower track has slid into place, lower superstructure to ground.

Remove cable.

(6) Install nine spacers and bolts(2). ※ Tighten bolts to 220±20kgf·m(1590±145lbf·ft) ※ Repeat procedure at opposite track frame support.

2

1

(7) After the bolts for one side frame are fastened repeat steps 1 thru 6 for other side frame.

50075TA06

5-13

MAINTENANCE 1. INSTRUCTION 1) INTERVAL OF MAINTENANCE (1) You may inspect and service the machine by the period as described at page 6-11 based on service meter at cluster support.

(2) Shorten the interval of inspect and service depending on site condition.(Such as dusty area, quarry, sea shore and etc.)

(3) Practice the entire related details at the same time when the service interval is doubled.

For example, in case of 100hours, carry out all the maintenance「Each 100hours, each 50 hours and daily service」at the same time.

2) PRECAUTION (1) Start to maintenance after you have the full knowledge of machine.

(2) The monitor installed on this machine does not entirely guarantee the condition of the machine.

Daily inspection should be performed according to clause 4, maintenance check list.

(3) Engine and hydraulic components have been preset in the factory.

Do not allow unauthorized personnel to reset them.

(4) Ask to your local dealer or Hyundai for the maintenance advice if unknown.

(5) Drain the used oil and coolant in a container and handle according to the method of handling for industrial waste to meet with regulations of each province or country.

6-1

22

22

2

Service meter

21076MA01

3) PROPER MAINTENANCE (1) Preplace and repair of parts It is required to replace the wearable and consumable parts such as bucket tooth, side cutter, filter and etc., regularly.

Replace damaged or worn parts at proper time to keep the performance of machine.

(2) Use genuine parts.

(3) Use the recommended oil.

(4) Remove the dust or water around the inlet of oil tank before supplying oil.

(5) Drain oil when the temperature of oil is warm.

(6) Do not repair anything while operating the engine.

Stop the engine when you fill the oil.

(7) Relieve hydraulic system of the pressure before repairing the hydraulic system.

(8) Confirm if the cluster is in the normal condition after completion of service.

(9) For more detail information of maintenance, please contact local Hyundai dealer. ※ Be sure to start the maintenance after fully understand the chapter 1, safety hints.

6-2

4) RELIEVING THE PRESSURE IN THE HYDRAULIC SYSTEM ※ Spouting of oil can cause the accident when loosening the cap or hose right after the operating of machine as the machine or oil is on the high pressure on the condition.

Be sure to relieve the pressure in the system before repairing hydraulic system.

(1) Place machine in parking position, and stop the engine.

21076MA02

(2) Set the safety lever completely in the release position, operate the control levers and pedals fully to the front, rear, left and right, to release the pressure in the hydraulic circuit. ※ This does not completely release the pressure, so when serving hydraulic component, loosen the connections slowly and do not stand in the direction where the oil spurt out.

Lever

Pedal

21076MA03

(3) Loosen the cap and relieve the pressure in the tank by pushing the top of the air breather.

45076MA11

6-3

5) PRECAUTION WHEN INSTALLING HYDRAULIC HOSES OR PIPES (1) Be particularly careful that the joint of hose, pipe and functioning item are not damaged.

Avoid contamination.

(2) Assemble after cleaning the hose, pipe and joint of functioning item.

(3) Use genuine parts.

(4) Do not assemble the hose in the condition of twisted or sharp radius.

(5) Keep the specified tighten torque.

6-4

6) PERIODICAL REPLACEMENT OF SAFETY PARTS (1) It is desirable to do periodic maintenance the machine for using the machine safely for a long time.

However, recommend to replace regularly the parts related safety not only safety but maintain satisfied performance.

(2) These parts can cause the disaster of life and material as the quality changes by passing time and it is worn, diluted, and gets fatigued by using repeatedly.

These are the parts which the operator can not judge the remained lifetime of them by visual inspection.

(3) Repair or replace if an abnormality of these parts is found even before the recommended replacement interval.

Periodical replacement of safety parts

Interval

Fuel hose(tank-engine)

Every 2 years

Engine

Heater hose (heater-engine)

Pump suction hose Main Every Pump delivery hose circuit 2 years Swing hose Hydraulic system Boom cylinder line hose Working Every Arm cylinder line hose device 2 years Bucket cylinder line hose

1. Replace O-ring and gasket at the same ※1 time when replacing the hose.

Replace clamp at the same time if the 2. hose clamp is cracked when checking and replacing the hose.

6-5

2. TIGHTENING TORQUE Use following table for unspecified torque.

1) BOLT AND NUT (1) Coarse thread Bolt size

8T

10T

kgf·m

lbf·ft

kgf·m

lbf·ft

M 6×1.0

0.85 ~ 1.25

6.15 ~ 9.04

1.14 ~ 1.74

8.2 ~ 12.6

M 8×1.25

2.0 ~ 3.0

14.5 ~ 21.7

2.7 ~ 4.1

19.5 ~ 29.7

M10×1.5

4.0 ~ 6.0

28.9 ~ 43.4

5.5 ~ 8.3

39.8 ~ 60.0

M12×1.75

7.4 ~ 11.2

53.5 ~ 81.0

9.8 ~ 15.8

70.9 ~ 114

M14×2.0

12.2 ~ 16.6

88.2 ~ 120

16.7 ~ 22.5

121 ~ 163

M16×2.0

18.6 ~ 25.2

135 ~ 182

25.2 ~ 34.2

182 ~ 247

M18×2.0

25.8 ~ 35.0

187 ~ 253

35.1 ~ 47.5

254 ~ 344

M20×2.5

36.2 ~ 49.0

262 ~ 354

49.2 ~ 66.6

356 ~ 482

M22×2.5

48.3 ~ 63.3

349 ~ 458

65.8 ~ 98.0

476 ~ 709

M24×3.0

62.5 ~ 84.5

452 ~ 611

85.0 ~ 115

615 ~ 832

M30×3.0

124 ~ 168

898 ~ 1214

169 ~ 229

1223 ~ 1656

M36×4.0

174 ~ 236

1261 ~ 1704

250 ~ 310

1808 ~ 2242

(2) Fine thread Bolt size

8T

10T

kgf·m

lbf·ft

kgf·m

lbf·ft

M 8×1.0

2.2 ~ 3.4

15.9 ~ 24.6

3.0 ~ 4.4

21.7 ~ 31.8

M10×1.2

4.5 ~ 6.7

32.5 ~ 48.5

5.9 ~ 8.9

42.7 ~ 64.4

M12×1.25

7.8 ~ 11.6

56.4 ~ 83.9

10.6 ~ 16.0

76.7 ~ 116

M14×1.5

13.3 ~ 18.1

96.2 ~ 131

17.9 ~ 24.1

130 ~ 174

M16×1.5

19.9 ~ 26.9

144 ~ 195

26.6 ~ 36.0

192 ~ 260

M18×1.5

28.6 ~ 43.6

207 ~ 315

38.4 ~ 52.0

278 ~ 376

M20×1.5

40.0 ~ 54.0

289 ~ 391

53.4 ~ 72.2

386 ~ 522

M22×1.5

52.7 ~ 71.3

381 ~ 516

70.7 ~ 95.7

511 ~ 692

M24×2.0

67.9 ~ 91.9

491 ~ 665

90.9 ~ 123

658 ~ 890

M30×2.0

137 ~ 185

990 ~ 1339

182 ~ 248

1314 ~ 1796

M36×3.0

192 ~ 260

1390 ~ 1880

262 ~ 354

1894 ~ 2562

6-6

2) PIPE AND HOSE Thread size

Width across flat(mm)

kgf·m

lbf·ft

1/4"

19

3

21.7

3/8"

22

4

28.9

1/2"

27

5

36.2

3/4"

36

12

86.8

1"

41

14

101

Thread size

Width across flat(mm)

kgf·m

lbf·ft

1/4"

19

4

28.9

3/8"

22

5

36.2

1/2"

27

6

43.4

3/4"

36

13

94.0

1"

41

15

109

3) FITTING

6-7

4) TIGHTENING TORQUE OF MAJOR COMPONENT No.

Descriptions

Bolt size

1

Engine mounting bolt, nut

Torque kgfÂm

lbfÂft

M20 Ý 2.5

46.4 Ü 4.6

336 Ü 33

Radiator mounting bolt

M16 Ý 2.0

29.7 Ü 4.5

215 Ü 32.5

3

Coupling mounting socket bolt

M20 Ý 2.5

46 Ü 2.0

333 Ü 14.5

4

Main pump housing mounting bolt

M10 Ý 1.5

4.8 Ü 0.3

35 Ü 2.2

5

Main pump mounting bolt

M20 Ý 2.5

44 Ü 6.6

318 Ü 47.7

Main control valve mounting nut

M12 Ý 1.75

12.2 Ü 1.3

88.2 Ü 9.4

Fuel tank mounting bolt

M20 Ý 2.5

45 Ü 5.1

325 Ü 36.8

8

Hydraulic oil tank mounting bolt

M20 Ý 2.5

45 Ü 5.1

325 Ü 36.8

9

Turning joint mounting bolt, nut

M16 Ý 2.0

29.7 Ü 4.5

215 Ü 32.5

10

Swing motor mounting bolt

M20 Ý 2.5

58.4 Ü 6.4

422 Ü 46.2

Swing bearing upper part mounting bolt

M24 Ý 3.0

94.5 Ü 10.5

683 Ü 75.9

Swing bearing lower part mounting bolt

M24 Ý 3.0

94.5 Ü 10.5

683 Ü 75.9

Travel motor mounting bolt

M20 Ý 2.5

57.9 Ü 8.7

419 Ü 62.9

14

Sprocket mounting bolt

M20 Ý 2.5

57.9 Ü 8.7

419 Ü 62.9

15

Carrier roller mounting bolt, nut

M16 Ý 2.0

31.3 Ü 4.7

226 Ü 33.9

16

Track roller mounting bolt

M22 Ý 2.5

81.9 Ü 16.1

592 Ü 116

Track tension cylinder mounting bolt

M22 Ý 1.5

87.2 Ü 12.5

602 Ü 90

Track shoe mounting bolt, nut(~#0031)

M22 Ý 1.5

105 Ü 5

760 Ü 36

18

Track shoe mounting bolt, nut(#0032~)

M24 Ý 1.5

140 Ü 5.0

1012Ü 36

19

Track guard mounting bolt

M22 Ý 2.5

81.9 Ü 16.1

592 Ü 116

20

Counterweight mounting bolt

M42 Ý 3.5

390 Ü 40

2821 Ü 289

Center frame support & lower track mounting bolt

M33 Ý 3.5

220 Ü 20

1591 Ü 145

22

Cab mounting bolt

M12 Ý 1.75

12.2 Ü 1.3

88.2 Ü 9.4

23

Operator's seat mounting bolt

M 8 Ý 1.25

2.5 Ü 0.5

18.1 Ü 3.6

2

Engine

6 7

11 12 13

17 18

21

Hydraulic system

Power train system

Under carriage

Others

ö For tightening torque of engine and hydraulic components, see engine maintenance guide and service manual.

6-8

3. FUEL, COOLANT AND LUBRICANTS 1) NEW MACHINE New machine used and filled with following lubricants.

Description

Specification

Engine oil

SAE 15W-40(API CH-4)

Hydraulic oil

ISO VG 46(SAE 10W)

Swing and travel reduction gear

SAE 85W-140(API GL-5)

Grease

Lithium base grease NLGI No. 2

Fuel

ASTM D975-No. 2

Coolant

Mixture of 50% ethylene glycol base antifreeze and 50% water.

SAE : Society of Automotive Engineers API : American Petroleum Institute ISO : International Organization for Standardization NLGI : National Lubricating Grease Institute ASTM : American Society of Testing and Material

6-9

2) RECOMMENDED OILS Use only oils listed below or equivalent.

Do not mix different brand oil.

Service point

Kind of fluid

Ambient temperature 。 C (。 F)

Capacity ℓ(U.S. gal)

-20 (-4)

-10 (14)

0 (32)

10 (50)

20 (68)

30 40 (86) (104)

SAE 30 Engine oil pan

SAE 10W Engine oil

38(10) SAE 10W-30 SAE 15W-40 5.0×2(1.3×2)

Swing drive Gear oil Final drive

SAE 85W-140

5.0×2 (1.3×2)

ISO VG 32

Tank; 250(66) Hydraulic tank

Hydraulic oil

ISO VG 46 System; 380(100)

ISO VG 68

ASTM D975 NO.1 Fuel tank

Diesel fuel

610(161) ASTM D975 NO.2

NLGI NO.1

Fitting (Grease nipple)

Grease

Radiator (Reservoir tank)

Mixture of antifreeze and water 50 : 50

As required NLGI NO.2

Ethylene glycol base permanent type

50(13.2)

6-10

4. MAINTENANCE CHECK LIST 1) DAILY SERVICE BEFORE STARTING Check items

Service

Page

Fuel tank

Check, Refill

6-26

Hydraulic oil level

Check, Add

6-29

Engine oil level

Check, Add

6-18

Coolant level

Check, Add

6-20

Control panel & pilot lamp

Check, Clean

6-40

Water separator

Check, Drain

6-26

Fan belt tension

Check, Adjust

6-24

Service

Page

Drain

6-26

Track tension

Check, Adjust

6-35

Swing bearing

Lubricate

6-33

Swing reduction gear oil

Check, Add

6-32

Lubricate pin and bushing

Lubricate

6-39

Visual check

2) EVERY 50 HOURS SERVICE Check items Fuel tank

·Boom cylinder tube end ·Boom foot ·Boom cylinder rod end ·Arm cylinder tube end ·Arm cylinder rod end ·Boom + Arm connecting ·Bucket cylinder tube end ·Bucket cylinder rod end ·Arm + Bucket connecting ·Arm + Link, Bucket control ·Bucket control rod

6-11

3) INITIAL 50 HOURS SERVICE Check items

Service

Page

Engine oil

Change

6-18, 19

Engine oil filter

Replace

6-18, 19

Pilot line filter

Replace

6-32

Hydraulic return filter

Replace

6-31

Drain filter cartridge

Replace

6-31

Fuel filter

Replace

6-26

Bolts & Nuts

Check, Tight

6-8

·Sprocket mounting bolts ·Travel motor mounting bolts ·Swing motor mounting bolts ·Swing bearing mounting bolts ·Engine mounting bolts ·Counterweight mounting bolts ·Turning joint locating bolts ·Track shoe mounting bolts and nuts ·Hydraulic pump mounting bolts

Service the above items only for the new machine, and thereafter keep the normal service interval.

4) EVERY 100 HOURS SERVICE Check items

Service

Page

★ Return filter

Replace

6-31

★ Pilot line filter

Replace

6-32

★ Element in hydraulic tank breather

Replace

6-31

★ Drain filter cartridge

Replace

6-31

★ Replace 4 filters for continuous hydraulic breaker operation only.

6-12

5) EVERY 250 HOURS SERVICE Check items

Service

Page

ø Engine oil

Change

6-18, 19

ø Engine oil filter

Replace

6-18, 19

Battery electrolyte

Check, Add

6-40

Hydraulic oil return filter(-#0062)

Replace

6-31

Drain filter cartridge(-#0062)

Replace

6-31

÷ Swing reduction gear oil

Change

6-32

÷ Swing reduction grease

Check, Add

6-32

Pilot line filter(-#0062)

Replace

6-32

Element in hydraulic tank breather

Replace

6-31

Check, Tight

6-8

Bolts & Nuts ÂSprocket mounting bolts ÂTravel motor mounting bolts ÂSwing motor mounting bolts ÂSwing bearing mounting bolts ÂEngine mounting bolts ÂCounterweight mounting bolts ÂTurning joint locating bolts ÂTrack shoe mounting bolts and nuts ÂHydraulic pump mounting bolts

ø If you use high sulfur containing fuel above than 0.5% or use low grade of engine oil reduce change interval. ÷ Change oil and add grease after initial 250 hours of operation.

6) EVERY 500 HOURS SERVICE Check items

Service

Page

Replace

6-27

Radiator and cooler fin

Inspect, Clean

6-23

÷ Air cleaner element

Check, Clean

6-25

Fuel filter

Replace

6-26

Travel reduction gear oil

Check, Add

6-33

ľ Travel reduction gear oil

Change

6-34

Prefilter

÷ Clean the primary element only after 500 hours operation or when the air cleaner warning lamp blinks.

Replace primary element and safety element after 4 times cleanings of primary element. ľ Change oil after initial 500 hours of operation.

6-13

7) EVERY 1000 HOURS SERVICE Check items

Service

Page

Hydraulic oil return filter(#0063-)

Replace

6-31

Drain filter cartridge(#0063-)

Replace

6-31

Pilot line filter(#0063-)

Replace

6-32

Travel motor reduction gear oil

Change

6-34

Swing reduction gear oil

Change

6-32

Swing reduction grease

Refill

6-32

Grease in swing gear and pinion

Change

6-33

Service

Page

Change

6-30

Check, Clean

6-30

Change

6-20, 21, 22, 23

8) EVERY 2000 HOURS SERVICE Check items Hydraulic tank øÂOil ÂSuction strainer Coolant

øChange oil every 600 hours of continuous hydraulic breaker operation.

6-14

9) WHEN REQUIRED Whenever you have trouble in the machine, you must perform the service of related items, system by system.

Check items

Service

Page

·Fuel tank

Drain or Clean

6-26

·Water separator

Drain or Replace

6-26

Replace

6-26

·Engine oil

Change

6-18, 19

·Engine oil filter

Replace

6-18, 19

·Coolant

Add or Change

6-20, 21, 22, 23

·Radiator

Clean or Flush

6-20, 21, 22, 23

Replace

6-25

·Hydraulic oil

Add or Change

6-29

·Return filter

Replace

6-31

·Drain line filter

Replace

6-31

·Pilot line filter

Replace

6-32

·Element of breather

Replace

6-31

·Suction strainer

Clean

6-30

Check, Adjust

6-35

·Tooth

Replace

6-37

·Side cutter

Replace

6-37

·Linkage

Adjust

6-38

·Bucket assy

Replace

6-36

·Fresh filter

Clean, Replace

6-43

·Recirculation filter

Clean, Replace

6-44

Fuel system

·Fuel filter Engine lubrication system

Engine cooling system

Engine air system ·Air cleaner element Hydraulic system

Undercarriage ·Track tension Bucket

Air conditioner and heater

6-15

5. MAINTENANCE CHART

5007A6MA31

Caution 1. Service intervals are based on the hour meter reading.

2. The number of each item shows the lubrication point on the machine.

3. Stop engine while filling oil, and use no open flames.

4. For other details, refer to the service manual.

6-16

Service interval

10 Hours or daily

No.

Service action

Description

250 Hours

500 Hours

Hydraulic oil

Check, Add

HO

250(66)

1

2

Engine oil

Check, Add

EO

38(10)

1

4

Radiator coolant

Check, Add

C

50(13.2)

1

5

Water separator

Check, Drain

-

-

1

6

Fan belt tension & damage

Check, Adjust

-

-

1

Check, Refill

DF

610(161)

1

7

Attachment pins & chamber

Check, Add

PGL

-

17

8

Fuel tank strainer and drain

Check, Clean

-

-

1

9

Swing bearing grease

Check, Add

PGL

-

3

10 Swing reduction gear case

Check, Add

GO

5.0(1.3)

2

13 Track tension

Check, Adjust

PGL

-

2

2

Engine oil level

Change

EO

38(10)

1

3

Engine oil filter

Replace

-

-

1

14 Battery(Electrolyte)

Check, Add

-

-

1

15 Hydraulic oil return filter(-#0062)

Replace

-

-

2

16 Drain filter cartridge(-#0062)

Replace

-

-

1

17 Air breather element

Replace

-

-

1

19 Line filter element(-#0062)

Replace

-

-

1

20 Aircon & heater outer filter

Clean

-

-

1

21 Air cleaner element(Primary)

Clean

-

-

1

22 Prefilter(Water, element)

Replace

-

-

1

23 Fuel filter element

Replace

-

-

2

Check, Clean

-

-

3

25 Corrosion resistor

Replace

-

-

1

10 Swing reduction gear case

Change

GO

5.0(1.3)

2

Check, Adjust

PGL

14(3.7)

1

15 Hydraulic oil return filter(#0063-)

Replace

-

-

2

16 Drain filter cartridge(#0063-)

Replace

-

-

1

19 Line filter element(#0063-)

Replace

-

-

1

26 Final drive gear case

Change

GO

5.0(1.3)

2

1

Hydraulic oil level

Change

HO

250(66)

1

4

Radiator coolant

Change

C

50(13.2)

1

18 Hydraulic oil suction strainer

Check, Clean

-

-

1

20 Aircon & heater recirculation filter

Clean, replace

-

-

1

20 Aircon & heater fresh filter

Clean, replace

-

-

1

21 Air cleaner element(Safety)

Replace

-

-

1

21 Air cleaner element(Primary)

Replace

-

-

1

28 Central grease pump(Option)

Check, Add

PGL

4kg(8.8lb)

1

24 Radiator and cooler fin

12 Swing gear and pinion 1000 Hours

2000 Hours

As required

Service points No.

1

27 Fuel tank

50 Hours or weekly

Oil Capacity symbol ℓ(U.S.gal)

※ Oil symbol : Please refer to the recommended lubricants for specification.

DF : Diesel fuel GO : Gear oil HO : Hydraulic oil C : Coolant PGL : Grease EO : Engine oil 6-17

6. SERVICE INSTRUCTION 1) CHECK ENGINE OIL LEVEL Check the oil level with the machine on a flat ground before starting engine.

(1) Pull out the dipstick and wipe with a clean cloth.

(2) Check the oil level by inserting the dipstick completely into the hole and pulling out again.

(3) If oil level is LOW, add oil and then check again. ※ If the oil is contaminated or diluted, change the oil regardless of the regular change interval. ※ Check oil level after engine has been stopped for 15 minutes.

Do not operate unless the oil level is in the normal range.

45076MA01

2) REPLACEMENT OF ENGINE OIL AND OIL FILTER (1) Warm up the engine.

(2) Remove the plug and allow the oil to drain. ·Adaptor size : 1-18UNS ※ A drain pan with a capacity of 40 liters (11U.S. gallons) will be adequate.

45076MA02

(3) Clean around the filter head, remove the filter and clean the gasket surface. ·Wrench size : 120mm(4.72in)

45076MA03

6-18

(4) Apply a light film of lubricating oil to the gasket sealing surface before installing the filters. ※ Fill the filters with clean lubricating oil.

Oil

18036MI09

(5) Install the filter to the filter head. ※ Mechanical over-tightening may distort the threads or damage the filter element seal. ·Install the filter as specified by the filter manufacturer.

45076MA31

(6) Fill the engine with clean oil to the proper level. ·Quantity : 38ℓ(10U.S.gallons)

45076MA04

(7) Operate the engine at low idle and inspect for leaks at the filters and the drain plug.

Shut the engine off and check the oil level with the dipstick. Allow 15minutes for oil to drain down before checking.

45076MA05

6-19

3) CHECK COOLANT (1) Check if the level of coolant in reservoir tank is between FULL and LOW. (2) Add the mixture of antifreeze and water after removing the cap of the reservoir tank if coolant is not sufficient.

(3) Be sure to use the reservoir empty, add the coolant by opening the cap of radiator.

(4) Replace gasket of radiator cap when it is damaged.

Hot coolant can spray out if radiator cap is removed while engine is hot. Remove the cap after the engine has cooled down.

45076MA06

OK

NOT OK

21076MA08

4) FLUSHING AND REFILLING OF RADIATOR (1) Change coolant Avoid prolonged and repeated skin contact with used antifreeze. Such prolonged repeated contact can cause skin disorders or other bodily injury.

Avoid excessive contact-wash thoroughly after contact.

Keep out of reach of children. ※ Protect the environment : Handling and disposal of used antifreeze can be subject to federal, state, and local law regulation.

Use authorized waste disposal facilities, including civic amenity sites and garages providing authorized facilities for the receipt of used antifreeze.

If in doubt, contact your local authorities for guidance as to proper handling of used antifreeze.

6-20

21076MA09

Wait until the temperature is below 50。 C (120。 。 F ) before removing the coolant system pressure cap.

Failure to do so can cause personal injury from heated coolant spray.

Drain the cooling system by opening the drain valve on the radiator and removing the plug in the bottom of the water inlet. A drain pan with a capacity of 50 liters(13U.S.gallons) will be adequate in most applications.

(2) Flushing of cooling system ① Fill the system with a mixture of sodium carbonate and water(or a commercially available equivalent). ※ Use 0.5kg(1.0pound) of sodium carbonate for every 23 liters(6.0U.S. gallons) of water. ※ Do not install the radiator cap. The engine is to be operated without the cap for this process.

18036MI16

OK

18036MI17

※ During filling, air must be vented from the engine coolant passages. Open the engine venting petcock.

The system must be filled slowly to prevent air locks. Wait 2 to 3 minutes to allow air to be vented, then add mixture to bring the level to the top.

18036MI18

② Operate the engine for 5 minutes with the coolant temperature above 80。 C(176。 F) .

Shut the engine off, and drain the cooling system.

START ON OFF 21076MA10

6-21

③ Fill the cooling system with clean water. ※ Be sure to vent the engine and aftercooler for complete filling. ※ Do not install the radiator cap or the new coolant filter.

18036MI20

④ Operate the engine for 5 minutes with the coolant temperature above 80。 C (176。 F).

Shut the engine off, and drain the cooling system. ※ If the water being drained is still dirty, the system must be flushed again until the water is clean.

START ON OFF

(3) Cooling system filling ① Use a mixture of 50 percent water and 50 percent ethylene glycol antifreeze to fill the cooling system.

Coolant capacity(engine only) : 9.5ℓ(2.5U.S. gallons). ※ Use the correct amount of DCA4 corrosion inhibitor to protect the cooling system.

21076MA10

DCA

18036MI22

② The system has a maximum fill rate of 18.9 liters(5U.S. gallons) per minute.

Do not exceed this fill rate. ※ The system must be filled slowly to prevent air locks.

During filling, air must be vented from the engine coolant passage.

Be sure to open the petcock.

Then add mixture to bring the level to the top.

6-22

18036MI23

③ Install the pressure cap. Operate the engine until it reaches a temperature 80 。 C(176 。 F), and check for coolant leaks.

Check the coolant level again to make sure the system is full of coolant.

NOT OK

21076MA10A

5) CLEAN RADIATOR AND OIL COOLER Check, and if necessary, clean and dry outside of radiator and oil cooler. After working in a dusty place, clean radiator more frequently.

NOT OK

(1) Visually inspect the radiator for clogged radiator fins.

(2) Use 550kPa(80psi) air pressure to blow the dirt and debris from the fins.

Blow the air in the opposite direction of the fan air flow.

550kPa (80psi) 13036MI01

(3) Visually inspect the radiator for bent or broken fins. ※ If the radiator must be replaced due to bent or broken fins which can cause the engine to overheat, refer to the manufacturer's replacement procedures.

(4) Visually inspect the radiator for core and gasket leaks.

13036MI01

6) CHECK CHANGE AIR COOLER Inspect the charge air cooler for dirt and debris blocking the fins. Check for cracks, holes, or other damage. If damage is found, please contact Hyundai distributor.

30676MI02

6-23

7) FAN BELT TENSION (1) Use the belt tension gage to measure the belt tension.

Fan belt tension : 11.3kg (25lb) (2) Turn the idler pulley adjusting screw(A) clockwise to increase the belt tension.

(3) Tighten the idler pulley shaft lockout(B) tightening torque : 19.4kgf·m (140lb·ft) 45076MA07

45067MA08

(4) Inspect the drive for damage.

13036M103

(5) Inspect the drive belt, tension bearing and for hub.

18036M127

6-24

8) INSPECTION OF COOLING FAN Personal injury can result from a fan blade failure. Never pull or pry on the fan. This can damage the fan blade and cause fan failure. ※ Rotate the crankshaft by using the engine barring gear. ※ A visual inspection of the cooling fan is required daily.

Check for cracks, loose rivets, and bent or loose blades.

Check the fan to make sure it is securely mounted. Tighten the capscrews if necessary.

Replace any fan that is damaged.

NOT OK

21076MA10B

9) CLEANING OF AIR CLEANER (1) Primary element ① Loosen the wing nut and remove the element. ② Clean the inside of the body. ③ Clean the element with pressurized air. ·Remove the dust inside of the element by the pressurized air(Below 3kgf/cm2, 40psi) forward and backward equally. ④ Inspect for cracks or damage of element by putting a light bulb inside of the element. ⑤ Insert element and tighten wing nut. ※ Replace the primary element after 4 times cleanings.

(2) Safety element ※ Replace the safety element only when the primary element is cleaned for the 4 times. ※ Always replace the safety element. Never attempt to reuse the safety element by cleaning the element.

Pressurized air 3kgf/cm2 below

Wing nut

21076MA11

21076MA11A

6-25

10) FUEL TANK (1) Fill fuel fully when system the operation to minimize water condensation, and check it with fuel gauge before starting the machine.

(2) Drain the water and sediment in the fuel tank by opening the drain cock. ※ Be sure to LOCK the cap of fuel tank. ※ Remove the strainer of the fuel tank and clean it if contaminated.

Stop the engine when refueling.

All lights and flames shall be kept at a safe distance while refueling.

45076MA12

11) REPLACEMENT OF FUEL FILTER (1) Clean around the filter head, remove the filter and clean the gasket surface.

(2) Replace the O-ring.

(3) Fully fill fuel in the new filter.

(4) Apply engine oil on the gasket of filter when mounting, and tighten 1/2 to 3/4 turn more after the gasket touches the filter head.

45076MA09

(5) Relieve the air after mounting. ※ Check for fuel leakage after the engine starts. ※ If air is in the fuel system, the engine will not start. Start engine after bleeding the air according to the method of bleeding air.

12) FUEL WATER SEPARATOR - Drain the water and sediment from the separator daily.

- Shut off the engine.

- Use your hand to open the drain valve.

- Turn the valve counterclockwise 3-1/2 complete turns until the valve drops down 1".

- Drain the filter sump of water until clear fuel is visible.

Do not overtighten the valve. ※D Overtightening can damage the threads.

- Push the valve up and turn the valve clockwise to close the drain valve.

45076MA10

6-26

13) PREFILTER ※ Inspect or drain the collection bowl of water daily and replace the element every 500hours.

(1) Drain water ① Open bowl drain valve to evacuate water. ② Close drain valve.

Open

Bowl Drain valve Close

Hydraulic tank

4507A6MA35

(2) Replace element ① Drain the unit of fuel. Follow "Drain water" instructions above. ② Remove element / bowl from filter head. ※ The bowl is reusable, do not damage or discard. ③ Separate element from bowl. Clean bowl and seal gland.

Open

Bowl

Hydraulic tank

4507A6MA36

④ Lubricate new bowl seal with clean fuel or motor oil and place in bowl gland. ⑤ Attach bowl to new element firmly by hand. ⑥ Lubricate new element seal and place in element top gland. ⑦ Attach the element and bowl to the head.

Filter head

Close Element Bowl Close

4507A6MA37

6-27

14) CORROSION RESISTOR(COOLANT FILTER) Do not remove the radiator cap from a hot engine. Wait until the coolant temperature is below 50°C(120°F) before removing the radiator cap. Heated coolant spray or steam can cause personal injury

OK

(1) Remove the radiator cap.

7807AMI21

(2) Turn the valve to the OFF position.

OFF

(3) Remove and discard the filter.

Clean the coolant filter head gasket's surface.

OFF

A small amount of coolant can leak when servicing the filter with the shutoff valve in the OFF position. To avoid personal injury, avoid contact with hot coolant.

7807AMI22

(4) Apply a thin film of clean engine oil to the gasket sealing surface before installing the new filter. ※ If the filter canister is damaged in any way, do not use it. Dents or scrapes can lead to a rupture or premature failure of the filter.

7803A6MI25

(5) Install a new filter on the filter head.

Tighten the filter until the gasket contacts the filter head surface.

(6) Tighten the filter an additional 1/2 to 3/4 of a turn. ※ Mechanical over tightening can distort the filter threads or damage the filter head.

7803A6MI26

6-28

15) LEAKAGE OF FUEL Be careful and clean the fuel hose, injection pump, fuel filter and other connections as the leakage from these part can cause fire.

FIRE !!

29076MI35

16) HYDRAULIC OIL CHECK (1) Stop the engine after retract the arm and bucket cylinders, then lower the boom and set the bucket on the ground at a flat location as in the illustration.

Red line

Level gauge

(2) Check the oil level at the level gauge of hydraulic oil tank.

(3) The oil level is normal if between the red lines.

21076MA14

17) FILLING HYDRAULIC OIL (1) Stop the engine to the position of level check.

(2) Loosen the cap and relieve the pressure in the tank by pushing the top of the air breather.

(3) Remove the breather on the top of oil tank and fill the oil to the specified level.

(4) Start engine after filling and operate the work equipment several times.

(5) Check the oil level at the level check position after engine stops.

6-29

45076MA15

18) CHANGE HYDRAULIC OIL (1) Lower the bucket on the ground pulling the arm and bucket cylinder to the maximum.

(2) Loosen the cap and relieve the pressure in the tank by pushing the top of the air breather.

(3) Remove the cover. ·Tightening torque : 6.9±1.4kgf·m (50±10lbf·ft) (4) Prepare a suitable container.

(5) To drain the oil loosen the drain plug at the bottom of the oil tank.

(6) Fill proper amount of recommended oil.

(7) Put the breather in the right position.

(8) B leed air hydraulic pump loosen the air breather at top of hydraulic pump assembly.

(9) Start engine and run continually. Release the air by full stroke of each control lever.

45076MA16

19) CLEAN SUCTION STRAINER Clean suction strainer as follows paying attention to the cause to be kept during oil filling.

(1) Remove the cover. ·Tightening torque : 6.9±1.4kgf·m (50±10lbf·ft) (2) Pull out the strainer in the tank.

(3) Wash the foreign material on the suction strainer with gasoline or cleaning oil.

(4) Replace the suction strainer if it is damaged.

(5) Assemble with reverse order of disassembly.

Be sure to install a new O-ring and reinsert in the oil tank. ※ Loosen the bolt slowly at the cover can be spring out by the spring when removing it.

45076MA17

6-30

20) REPLACEMENT OF RETURN FILTER Replace as follows paying attention to the cause to be kept during the replacement.

(1) Remove the cover. ·Tightening torque : 6.9±1.4kgf·m (50±10lbf·ft) (2) Remove the spring, by-pass valve, and return filter in the tank.

(3) Replace the element with new one.

45076MA18

21) REPLACEMENT OF ELEMENT IN HYDRAULIC TANK BREATHER (1) Relieve the pressure in the tank by loosening the air breather.

(2) Loosen the breather lock key.

(3) Pull out the filter element.

(4) Replace the filter element and O-ring with new one.

(5) Reassemble by reverse order of disassembly. ·Tightening torque : 0.7~0.9kgf·m (5.0~6.5lbf·ft)

45076MA19

22) REPLACE OF DRAIN FILTER CARTRIDGE Clean the dust around filter and replace with new one after removing the cartridge. ※ Tighten about 2/3 turn more after the gasket of cartridge contacts seal side of filter body for mounting. ※ Change cartridge after initial 50 hours of operation. Thereafter, change cartridge every 250 hours.

45076MA20

6-31

23) REPLACE OF PILOT LINE FILTER (1) Loosen the nut positioned on the filter body.

(2) Pull out the filter element and clean filter housing.

(3) Install the new element and tighten using specified torque. ※ Change cartridge after initial 50 hours of operation. Thereafter, change cartridge every 250 hours.

45076MA21

24) CHECK THE SWING REDUCTION GEAR OIL (1) Pull out the dipstick and clean it.

(2) Insert it again.

(3) Pull out one more time to check the oil level and fill the oil if the level is not sufficient.

45076MA22

25) CHANGE SWING REDUCTION GEAR OIL (1) Raise the temperature of oil by swinging the machine before replace the oil and park the machine on the flat ground.

(2) Loosen the plug of the drain port.

(3) Drain into a proper container.

(4) Wash the drain plug and reinstall it with sealing tape.

Fill proper amount of recommended oil. ·Amount of oil : 5ℓ(1.3U.S.gal)

45076MA23

26) LUBRICATE BEARING OF OUTPUT SHAFT IN REDUCTION GEAR (1) Remove air vent plug.

(2) Lubricate NLGI No.2 with grease gun until comes out new grease from air vent port. ※ Lubricate every 1000 hours.

45076MA24

6-32

27) LUBRICATE SWING BEARING (1) Grease at 3 fitting. ※ Lubricate every 50 hours.

13036MI07

28) SWING GEAR AND PINION (1) Drain old grease ① Remove under cover of lower frame. ② Remove drain cover of lower frame. ③ Remove filler cover of upper frame. ④ Operate full turn(360。) of swing several times.

Filler cover

Front of upper frame 13036MI08

(2) Refill new grease ① Install drain cover. ② Fill with new grease. ③ Install filler cover. ·Capacity : 13.9kg(31lb) Top of lower frame

Drain cover 13036MI09

29) CHECK THE TRAVEL REDUCTION GEAR OIL (1) Operate the machine to the position of drain plug down to the flat ground.

(2) Loosen the level plug and check the oil level.

If the level is at the hole of the plug, it is normal.

Fill the oil if it is not sufficient.

45076MA25

6-33

30) CHANGE THE TRAVEL REDUCTION GEAR OIL (1) Raise the temperature of the oil by traveling machine first.

·Draining position

(2) Stop when the position of the drain plug is down.

(3) Loosen the level plug and then the drain plug.

(4) Drain the oil to adequate container.

(5) Tighten the drain plug and fill specified amount of oil at filling port.

(6) Tighten the level plug and travel slowly to check if there is any leakage of oil. ·Filling position

45076MA26

31) LUBRICATE RCV LEVER Remove the bellows and with a grease gun grease the joint part(A) and sliding parts(B).

A

B

21076MA25

6-34

32) ADJUSTMENT OF TRACK TENSION ※ It is important to adjust the tension of track properly to extend the lifetime of track and traveling device. ※ The wear of pins and bushings on the undercarriage will vary with the working conditions and soil properties.

It is thus necessary to continually inspect the track tension so as to maintain the standard tension on it.

(1) Raise the chassis with the boom and arm.

90 ~ 110

Bottom of track frame

Track frame

L

(2) Measure the distance between bottom of track frame on track center and track of shoe. ※ Remove mud with rotating the track before measuring.

Back of shoe

Track shoe 21076MA27

(3) If the tension is tight, drain the grease in the grease nipple and if the tension is loose, charge the grease.

Personal injury or death can result from grease under pressure.

When loosening the grease nipple, do not loosen more than one turn as there is a danger of a spring coming out of the nipple because of the high pressure inside. ※ When the grease is drained, move the track to the forward and backward slightly.

If the track tension is loose even after the grease is charged to the maximum, change the pins and bushings as there are worn seriously.

6-35

Working condition

Length (L)

General

390~420mm 15.4~16.5”

Swamp

420~460mm 16.5~18”

Sand, Mud, Pebbles About 460mm About 18”

33) REPLACEMENT OF BUCKET When knocking the pin in with a hammer, metal particles may fly and cause serious injury, particularly if they get into your eyes.

When carrying out this operation, always wear goggles, helmet, gloves, and other protective equipment. ※ When the bucket is removed, place it in a stable condition. ※ When performing joint work, make sure signals to each other and work carefully for safety's sake.

21076MA27

(1) Lower the bucket on the ground as the picture shown in the right.

(2) Lock the safety lever to the LOCK position and stop the engine.

(3) Remove the stopper bolts(1) and nuts(2), then remove pins(3, 4) and remove the bucket. ※ When removing the pins, place the bucket so that it is in light contact with the ground. ※ If the bucket is lowered strongly to the ground, the resistance will be increased and it will be difficult to remove the pins.

36076MA26

※ After remove the pins, make sure that they do not become contaminated with sand or mud and that the seals of bushing on both sides do not become damaged.

(4) Align the arm with holes(A) and the link with holes(B), then coat with grease and install pins(3, 4) ※ When installing the bucket, the O-rings are easily damaged, so fit the O-rings on the boss of the bucket as shown in the picture.

After knocking the pin, move the O-ring down to the regular groove.

B A

13036MI15

6-36

(5) Install the stopper bolt(1) and nuts(2) for each pin, then grease the pin.

45076MA29

34) REPLACEMENT OF BUCKET TOOTH (1) Timing of replacement ① Check wearing condition as shown in the illustration and replace tooth tip before adapter starts to wear. ② If excessive use, tooth adapter has worn out, replacement may become impossible.

11076MI26

(2) Instructions for replacement ① Pull out pin by striking pin with punch or hammer, avoiding damage to locking washer. ② Remove dust and mud from surface of tooth adapter by using knife. ③ Place locking washer in its proper place, and fit tooth tip to adapter. ④ Insert pin until locking washer is positioned at tooth pin groove.

Personal injury can result from bucket falling.

Block the bucket before changing tooth tips or side cutters.

6-37

11076MI27

35) ADJUSTMENT OF BUCKET CLEARANCE (1) Lower the bucket on the ground as the picture shown in the right.

(2) Swing to the left and keep the arm boss to be contact to the bucket left.

(3) Lock the safety lever to the LOCK position and stop the engine.

(4) Measure the clearance(A) between bucket and arm boss. This is the total clearance.

(5) Adjusting ① Loosen bolt(2), and remove washer(3), plate(1) and shim(4). ② Remove the shim equivalent value with measuring value. ③ Assemble the parts in the reverse order of removal. ·Tightening torque : 29.6±3.2kgf·m (214.0±23.1lbf·ft) ·Normal clearance : 0.5 ~ 1.0mm (0.02 ~ 0.04in) ※ If the bucket is not adjusted correctly, noise and vibration created during operation, and damaged O-ring, pin and bushing quickly.

6-38

45076MA28

36) LUBRICATE PIN AND BUSHING (1) Lubricate to each pin of working device Lubricate the grease to the grease nipple according to the lubricating interval.

No.

Description

Qty

1

Lubrication manifold at boom

5

2

Boom cylinder pin

2

3

Boom and arm connection pin

1

4

Arm cylinder pin(Rod side)

1

Bucket cylinder pin(Head, rod)

2

Bucket link(Control rod)

3

Arm and bucket connection pin

1

Arm and control link connection pin

1

5

1

4 3

5

※ Shorten lubricating interval when working in the water or dusty place.

2

21074OP26

(2) Dust seals are mounted on the rotating part of working device to extend the lubricating interval. ※ Mount the lip to be faced outside when replace the dust seal.

21076MA28

※ If it is assembled in wrong direction, it will cause fast wear of pin and bushing, and create noise and vibration during operation. ※ Assemble the seal same direction with picture and use with plastic hammer when replace.

Outside

13036MI28

6-39

7. ELECTRICAL SYSTEM 1) WIRING, GAUGES Check regularly and repair loose or malfunctioning gauges when found.

13036MI29

2) BATTERY (1) Check and repair ① Check the electrolyte level and fill with distilled water to the prescribed level as necessary. ② Wash the terminal with hot water if it is contaminated, and apply grease to the terminals after washing.

Do not stain clothes or skin with electrolyte as it is acid.

Be careful not to get the electrolyte in eyes.

Wash with clean water and go to the doctor if it enters the eyes. ※ Remove the fire and spark around battery.

Plug

Upper level Lower level 10 ~15mm

13036MI30

(2) Specific gravity of battery Judge the charging rate of battery by the specific gravity. The specific gravity changes by the ambient temperature.

Check the charging rate by referring to the chart below.

Temperature

20。 C

10。 C

-10。 C

100%

1.26

1.27

1.28

90%

1.24

1.25

1.26

80%

1.22

1.23

1.24

75%

1.21

1.22

1.23

Charging rate

(3) Method of removing the battery cable Remove the cable from the ground connection first( terminal side) and reconnect it last when reassembling.

Specific gravity meter Height of sight Battery

13036MI31

Ground

Battery relay 13036MI32

6-40

3) STARTING THE ENGINE WITH A BOOSTER CABLE Keep following order when you are going to start engine using booster cable.

(1) Connection of booster cable ※ Use the same capacity of battery for starting. ① Connect the red terminal of booster cable to the battery (+) terminal between exhausted and new battery. ② Connect the black terminal of the booster cable to the battery (-) terminal between exhausted and new battery. ※ Keep firmly all connection, the spark will be caused when connecting finally.

Connection of booster cable Red ③

①

②

Trouble(Exhausted) Normal(New) machine machine Black ④ To chassis of trouble machine

Connection order : ①→②→③→④ 13036MI33

(2) Starting the engine ① Start engine with starting switch. ② If you can not start it by one time, restart the engine after 2 minutes.

START ON OFF

(3) Taking off the booster cable ① Take off the booster cable(black). ② Take off the booster cable(red) connected to the (+) terminal. ③ Run engine with high idle until charging the exhausted battery by alternator, fully.

Explosive gas is generated while using the battery or charging it. Keep away flame and be careful not to cause the spark. ※ Charge the battery in the well ventilated place. ※ Place the machine on the earth or concrete.

Avoid charging the machine on the steel plate. ※ Do not connect (+) terminal and (-) terminal when connecting booster cable because it will be shorted.

6-41

21076MA29

Disconnection of booster cable

Red ③

②

①

Trouble(Exhausted) Normal(New) machine machine Black ④ To chassis of trouble machine

Disconnection order : ④→③→②→① 13036MI33

(4) Welding repair Before start to welding, follow the below procedure. ① Shut off the engine and remove the starting switch. ② Disconnect ground cable from battery by master switch. ③ Before carrying out any electric welding on the machine, the battery cables should be disconnected and the connectors pulled out of the electronic control units(ECM, CPU, cluster etc). ④ Connect the earth(ground) lead of the welding equipment as close to the welding point as possible. ※ Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.

Do not attempt to welding work before carry out the above.

If not, it will caused serious damage at electric CAPO system.

6-42

Y

R

G

C0L 45 0 EX 11 OB -32 L:R NB DE :21 MORT NO PA

7

CN CN

R SO

M OE T R PO

AT TU AC T R PO

N SE T OR P O R

50

-51

CPU Controller

OFF

Engine controller(ECM)

Master switch

Cluster

I DA UN HY

de

Po

Wo

rk

Mo

r Mo we

Tra

de

Us

er

vel

Sp

ee

d t

lec

Se

de Mo to

De

cel

Au

Battery

CN-56

50076MI35

8. AIR CONDITIONER AND HEATER 1) CLEAN AND REPLACE OF FRESH AIR FILTER ※ Always stop the engine before servicing.

(1) Move seat and console box to arrow direction using the adjust lever.

45076MA35

(2) Remove the outer filter. ※ When installing a filter, be careful not to change the filter direction.

Inside

AIR FLOW

Outside

21076MA31

(3) Clean the filter using a pressurized air(Below 2kgf/cm2, 28psi).

When using pressurized air, be sure to wear safety glasses.

(4) Inspect the filter after cleaning. If it is damaged or badly contaminated, use a new filter.

Inside Outside Pressurized air 2kgf/cm2 below

13036MI34

2) CLEAN AND REPLACE OF RECIRCULATION FILTER ※ Always stop the engine before servicing.

(1) Move seat and console box to arrow direction using the adjust lever.

45076MA36

6-43

(2) Remove recirculation filter.

21076MA33

(3) Clean the recirculation filter using a pressurized air (Below 2kgf/cm2, 28psi) or washing with water.

When using pressurized air, be sure to wear safety glasses. ※ Dry off after washing with water.

(4) Inspect the filter after cleaning. If it is damaged or badly contaminated, use a new filter.

Pressurized air 2kgf/cm2 below

13036MI35

3) PRECAUTIONS FOR USING AIR CONDITIONER (1) When using the air conditioner for a long time, open the window once every one hour.

(2) Be careful not to overcool the cab.

(3) The cab is properly cooled if the operator feels cool when entering there from outside(About 5。 C lower than the outside temperature).

(4) When cooling, change air occasionally.

4) CHECK DURING SEASON Ask the service center for replenishment of refrigerant or other maintenance service so that the cooling performance is not damaged.

5) CHECK DURING OFF-SEASON Operate the air conditioner 2 or 3 times a month(Each for a few minutes) to avoid loss of oil film in the compressor.

6-44

TROUBLESHOOTING GUIDE 1. ENGINE ※ This guide is not intended to cover every conditions, however many of the more common possibilities are listed. ※ When fault codes(3digit) are displayed on the monitoring display, consult cummins for details.

Service

Trouble

The engine oil pressure lamp · Add the oil to the specified level. lights ON when engine speed is · Replace the oil filter cartridge. raised after completion of warm · Check oil leakage from the pipe or the joint. up. · Replace the monitor.

Steam is emitted from the top part of the radiator(The pressure valve).

Coolant level warning lamp lights ON.

· Supply the coolant and check leakage. · Adjust fan belt tension. · Wash out inside of cooling system. · Clean or repair the radiator fin. · Check the thermostat. · Tighten the radiator cap firmly or replace the packing of it.

· Replace the monitor.

The engine does not start when · Add fuel. the starting motor is turned over. · Repair where air is leaking into fuel system.

· Check the injection pump or the nozzle. · Check the valve clearance. · Check engine compression pressure.

Exhaust gas is white or blue.

· Adjust to specified oil quantity. · Replace with specified fuel.

Exhaust gas occasionally turns · Clean or replace the air cleaner element. black. · Check the nozzle.

· Check engine compression pressure. · Clean or replace the turbocharger.

Combustion noise occasionally · Check the nozzle. changes to breathing sound.

Unusual combustion noise or · Check with specified fuel. mechanical noise. · Check over-heating

· Replace the muffler. · Adjust valve clearance.

7-1

Remark

2. ELECTRICAL SYSTEM Trouble

Service

Lamp does not glow brightly even · Check for loose terminals and open-circuit wiring. when engine runs at high speed. · Adjust belt tension.

Lamp flickers while engine runs.

Battery charging lamp does not · Check the alternator. go out even when engine runs at · Check and repair wiring. high speed.

Unusual noise is emitted from the · Check the alternator. alternator.

Starting motor does not turn when · Check and repair the wiring. starting switch is turned ON. · Charge the battery. · Check the starting motor. · Check the safety relay.

The pinion of the starting motor · Charge the battery. keeps going in and out. · Check the safety relay.

Starting motor turns the engine · Charge the battery. sluggishly. · Check the starting motor.

The starting motor disengages · Check and repair the wiring. before the engine starts up. · Charge the battery.

The engine warming up lamp · Check and repair wiring. does not go ON. · Check the monitor.

The engine oil pressure lamp · Check the monitor. does not light up when engine is · Check the caution lamp switch. stationary(When the starting switch is in ON position.)

Battery charging lamp does not · Check the monitor. light up when the engine is · Check and repair the wiring. stationary.

(When the starting switch is in ON position.)

7-2

Remark

3. OTHERS Trouble Track slip out of place.

Excessive wear of the sprocket.

Service

· Adjust tension of track.

Bucket either rises slowly or not at · Add oil to specified level. all.

Slow speed of travel, swing, boom, arm and bucket.

· Add oil to specified level.

Unusual noise emitted from pump. · Clean the hydraulic tank strainer.

Excessive oil temperature rise of hydraulic oil.

· Clean the oil cooler. · Adjust fan belt tension. · Add oil to specified level.

7-3

Remark

HYDRAULIC BREAKER 1. SELECTING HYDRAULIC BREAKER 1) Become familiar with the manual and select breakers suitable to machine specifications.

2) Make careful selection in consideration of oil quantity, pressure and striking force, to enable satisfied performance.

3) When apply a breaker to the machine, consult your local dealer of Hyundai for further explanation.

8-1

2. CIRCUIT CONFIGURATION 1) As for breaker oil pressure line, use extra spool of main control valve.

2) Set proper breaker pressure on load relief valve.

3) The pressure of the ROBEX500LC-7A system is 330kgf/cm2(4700psi).

4) Adjusting oil quantity

Oil quantity according to engine rpm

(1) Use the breaker mode from work mode. Default oil flow quantity is 306lpm at 1800rpm. Use accel dial switch to control the oil flow quantity.

(2) If the quantity of hydraulic oil is not controlled properly, it causes short lifecycle of the breaker and the machine by increased breaking force and count.

Engine rpm

Oil flow ˶/min

Oil flow U.S.gpm

1700

289

76.4

1600

272

71.9

1500

255

67.4

1400

238

62.9

ö Relief pressure : 200kgf/cm

2

5) The accumulator should be used to the breaker charging and return line.

If the accumulator is not used, it will be damage as the input wave is delivered. ö Keep the pressure pulsation of pump below 60kgf/cm2(853psi) by installing the accumulator.

6) Do not connect the breaker return line to the main control, but connect to the return line front of the cooler.

7) Do not connect the breaker return line to drain lines, such as of swing motor, travel motor or pump, otherwise they should be damaged.

8) One of spool of the main control valve should be connected to the tank.

9) Select the size of pipe laying considering the back pressure.

10) Shimless tube should be used for the piping. The hose and seal should be used Hyundai genuine parts.

11) Weld the bracket for pipe clamp to prevent damage caused by vibration.

8-2

3. MAINTENANCE 1) MAINTENANCE OF HYDRAULIC OIL AND FILTER (1) As machine with an hydraulic breaker provides the hydraulic oil becomes severely contaminated.

(2) So, unless frequently maintained, the machine may easily go out of order.

(3) Inspect and maintain hydraulic oil and 4 kinds of filter elements in particular, in order to prolong machine life.

(4) Replace when the breaker work is used for short time according to the standard of right graph.

2) RELEASE THE PRESSURE IN BREAKER CIRCUIT When breaker operating is finished, stop engine and push pedal or switch for breaker to release pressure in breaker circuit.

If pressure still remains, the lifetime of the diaphragm in the accumulator will be shortened.

3) Be careful to prevent contamination by dust, sand and etc.

If such pollution become mixed into the oil, the pump moving parts will wear abnormally, shorten lifetime and become damaged.

4) When operating breaker, bolts and nuts of main equipment may be loosened by vibration. So, it must be inspected periodically.

Service interval

unit : hours Operating Hydraulic Filter Attachment rate oil element Bucket

100%

2,000

250

Breaker

100%

600

100

ú Replace following filter same time ÂHydraulic return filter : 1EA ÂPilot line filter : 1EA ÂElement in hydraulic tank breather : 1EA ÂDrain filter cartridge : 1EA

Filter replace guide for hydraulic breaker 100 Time to replace filter elements

Average 80 operating 60 rate of machine 40 (%)

20 0 50

100

150

200 250

Operating hours of machine(Hr)

Oil change guide for hydraulic breaker 100 Average 80 operating 60 rate of machine 40 (%) 20 0 500

Time to change oil

1000

1500

2000

Operating hours of machine(Hr)

8-3

4. PRECAUTIONS WHILE OPERATING THE BREAKER 1) DO NOT BREAK ROCK WHILE LOWERING As the breaker is heavy in comparison with bucket, it must be operated slowly.

If breaker is rapidly pushed down, working device may be damaged.

Incorrect

13038OA03

2) DO NOT USE BREAKER TO CARRY BROKEN STONE OR ROCK BY SWING OPERATING This may damage the operation device and swing system.

Incorrect

13038OA04

3) OPERATE BREAKER WITH A GAP IN EXCESS OF 100mm(4 inches) FROM THE END OF THE STROKE TIP If breaker is operated with the end tip, the cylinder may be damaged.

Incorrect

13038OA05

4) IF THE HYDRAULIC HOSES VIBRATE EXCESSIVELY If the machine used in this condition continuously this will effect badly on the machine such as loosening bolt, oil leakage, damage of pump pipe and etc.

Incorrect

13038OA06

8-4

5) DO NOT CONTINUE TO WORKING OVER ONE MINUTE AT SAME POSITION OF BOOM AND ARM This will increase the temperature of the oil, and cause problem in the accumulator and seals.

Incorrect For one minute

13038OA07

6) DO NOT MOVE MACHINE OR BREAKER WHILE STRIKING Do not move hammer while striking.

This will cause damage to the working device and the swing system.

Incorrect

13038OA08

7) DO NOT WORK WHILE SWING STATE Do not work while swing position of superstructure.

It cause the band of track shoe, oil leakage of roller.

Prohibitation

Work

Work

Prohibitation 13038OA09

8) TAKE CARE OF CHISEL AND BOOM INTERFACE Make sure of the arm and bucket control lever operation.

Incorrect

13038OA10

8-5

5. QUICK CLAMP 1) FIXING BUCKET WITH QUICK CLAMP

Quick clamp switch

(1) Before fixing bucket, remove safety pin of the moving hook.

Safety button

(2) Pulling safety button, press the quick clamp switch to unlock position. Then, the moving hook is placed on release position.

Safety pin

(3) Aligning the arm and bucket, insert static hook of quick clamp to the bucket pin.

Static hook

(4) Operate RCV lever to bucket-in position.

Then, the moving hook is coupled with the bucket link pin.

Make sure that the moving hook is completely contacted with bucket link pin.

Moving hook

(5) Press quick clamp switch to lock position.

Operate RCV lever to bucket-in position. ö Be sure to check connection status between bucket pins and hooks of quick clamp

RCV(RH)

Front

8-6

(6) After checking the connection status between bucket pins and hooks of quick clamp, insert safety pin of moving hook to lock position.

Safety pin

2) REMOVE BUCKET FROM QUICK CLAMP Removing procedure is reverse of fixing.

3) PRE-CAUTION OF USING QUICK CLAMP When operating the machine with quick clamp, confirm that the quick clamp switch is lock position and safety pin of moving hook is inserted.

Operating the machine with quick clamp switch unlocked and without safety pin of moving hook can cause the bucket to drop off and bring about the accident.

Lock

Serious injury or death can result from this accident.

Be careful to operate the machine equipped with quick clamp. The bucket may hit cab, boom and boom cylinders when it reaches vicinity of them. ö HYUNDAI will not be responsible for any injury or damage in case that safety pin is not installed properly.

8-7

Unlock

INDEX

A Accel dial switch - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-10 Adjustable track gauge - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-12 After engine start - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-4 Air breather element - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-31 Air cleaner filter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-25 Air conditioner & heater - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-15 Air conditioner filter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-43 Alternate exit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0-12 Attachment lowering - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-24

Fuel filter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-26 Fuel leakage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-29 Fuel tank - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-26 Fuse box - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-20

B

L

H Hydraulic breaker - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-1 Hydraulic oil changing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-30 Hydraulic oil filling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-29 Hydraulic oil level - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-29

Battery - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-40 Before starting engine - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2 Boom lowering - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-24 Bucket clearance adjustment - - - - - - - - - - - - - - - - - - - - - - - - - - 6-38 Bucket replacement - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-36 Bucket selection guide - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-13 Bucket tooth replacement - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-37

Levers & pedals - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-13 Lifting capacities - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-9 Lubricant specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-21

M Maintenance check list - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-11 Major component - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-17 Mode selection system - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-6 Monitor display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-11 Monitor panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2 Mounting and dismounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-12

C Cab air filter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-43 Cab device - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-1 Cassette & radio - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-23 Changing machine control pattern - - - - - - - - - - - - - - - - - - 4-27 Cigar lighter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-18 Coolant - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-20 Coolant filter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-28 Cooling fan - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-25 CPU controller - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-20

N New machine operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1

O Oil cooler - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-23 Operating pattern - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-27

P

D

Pedals - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-14 Periodical replacement parts - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-13 Pilot filter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-32 Pin & bushing adjustment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-39 Prefilter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-27 Prolix resistor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-21

Disassembling for transportation - - - - - - - - - - - - - - - - - - - - 5-5 Drain filter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-30

E Emergency engine speed control - - - - - - - - - - - - - - - - - - - 3-21 Emergency engine starting connector - - - - - - - - - - - - 3-21 Engine oil filter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-18 Engine oil level - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-18 Engine starting & stop - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3 Engine starting by booster - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-41 Engine stop - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-5

R Radiator flushing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-20 Radio - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-23 RCV lever lubricate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-34 Recommended oils - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-21, 6-10 Relieving pressure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-3 Return filter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-31

F Fan belt - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-24 9-1

S Safety hints - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1 Safety labels - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0-5 Safety parts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-5 Seat - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-19 Seat belt - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-19 Service meter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-21 Speciation for major component - - - - - - - - - - - - - - - - - - - - - 2-17 Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-2 Start switch - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-9 Storage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-25 Suction strainer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-30 Swing bearing grease - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-33 Swing gear & pinion grease - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-33 Swing reduction gear oil - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-32 Switch panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7 Switches - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-9

T Torques-major component - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-8 Torques-fastener - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-6 Towing machine - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-16 Track adjustment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-35 Track shoe selection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-15 Transportation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-1 Travel reduction gear oil - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-34 Travelling machine - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-14 Troubleshooting guide - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-1

U Undercarriage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-15

W Warming up operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-5 Warning lamps - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2 Water separator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-26 Weight - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-8 Working device operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-13 Working method - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-17 Working range - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-5

9-2