5. PROPELLER INSTALLATION
THRUST WASHER INSTALLATION Install with the groove side facing to the gear case.
+
GEAR CASE
/
10 rnrn CROWN HEAD NUT 1.0 N m (0.1 kgf-rn, 0.7 Ibf-ft)
3 rnrn COTTER PIN
INSTALLATION Bend the pin as shown.
9
A l w a y s use t h e g e n u i n e H o n d a o r H o n d a recommended part (stainless steel). 3 mm COTTER PIN
25
