Hein-Werner Series C12HD Hydraulic Backhoes Parts Manual - PDF DOWNLOAD

SERIAL NO.

Parts Manual for Series C12 HO Hydraulic Backhoes

NOTE: The parts pages are intended for use in ordering parts, and therefore do not always depict the correct way to assemble components.

CONSTRUCTION EQUIPMENT DIVISION WAUKESHA, WISCONSIN 53186

UW. V. 12.3/04.21.83

Akerman 11W Inc. ["Akerman") WARRANTY AND LIMITATION OF LIABILITY Limited Warrudy Akerman warrants to the first user that its products shall be free from defects in material and workmanship for six (6) months from date of delivery or 1000 hours of use, whichever first occurs.

Should failure.to conform with this warranty appear during the warranty period as mentioned above under normal and proper use and provided the products have been properly installed, stored and maintained, Akerman shall, if given prompt notice by Buyer, correct such nonconformity, at Akerman's option, by: (1) repair at jobsite, if possible; or, (ii) repair or replacement of the nonconforming products or parts thereof F.O.B. factory or authorized distributor; or, (iii) refund of the purchase • price of the nonconforming product after return of such product to Akerman. Return of products or parts to Akerman shall be at Buyer's risk and expense. In no event shall Akerman be responsible for providing working access to the defect, including • disassembly and reassembly of associated equipment.

Parts repaired or replaced, or the product if replaced as a unit, are warranted for 30 days or for the period of time remaining under the original warranty, whichever is longer. . THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF QUALITY,WRITTEN,ORAL OR IMPLIED; AND ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. Correction of nonconformities in the manner and for the period of time provided above shall be Buyer's exclusive remedy and shall constitute fulfillment of all liabilities of Akerman (including any liability for direct, indirect, special, incidental and consequential damages) whether in warranty, contract, negligence, tort, strict liability or otherwise with respect to nonconformance or defects in the products delivered hereunder.

Akerman neither assumes nor authorizes any person to assume for it any obligation other than as herein provided in connection with its products.

The foregoing warranties shall not apply to any used product or parts or any products or parts which a) have been improperly repaired or altered, b) have been subjected to misuse. negligence or accident, or c) have been used in a manner contrary to Akerman's instructions.

cC

LIMITATION OF LIABILITY IN NO EVENT.S.11ALL AKERMAN BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES whether arising in contract, negligence, tort; strict liability or otherwise, including but not limited to damage to property, loss of profits or revenues, loss of use of the product or any associated equipment, cost of capital, cost of substitute equipment, facilities or services, downtime costs, or claims of customers of the Buyer for such or other damages, whether on account of products. parts or services furnished hereunder or delays in delivery or performance thereof.

5j1111-WWWWWWW.U.!-111-11.',U4141:111141TAPIRIAIWU11.111.11VIVAIMMMV,M141.!.t/4141:q

ABOUT THIS MANUAL

This manual incorporates a new simplified page numbering system. The book is divided into major categories or sections, each of which is separated by an index tab sheet. Pages are numbered consecutively within each section. For example, let's say the section entitled "Pumps and Motors" contains the following pages: Page Page Page Page

1 2 3 4

Dipstick or Boom Pump Swing and Boost Pump Swing Motor Propel Motor

Should we add a pump to the machine at a future date, it would simply become "page 5."

If we change one of the existing pages, the new page would have the same number. For - example, if we change the vendor on the swing motor, a new page would be prepared. This new page would also be "page 3". In other words, each Master Parts Manual would then contain two page 3's.

The effective date and serial number block will be your key to determine which page to use for a particular machine.

Each page includes the name of the major category it is a part of. This is found below the title of the page itself, and will enable you to file newly released pages in their proper location in your Master Parts Manual.

As in the past, customer manuals will be individually assembled, and contain only those pages which apply to his particular machine.

CED 63

INSTRUCTIONS FOR ORDERING REPLACEMENT PARTS

To assure prompt and accurate service, include the following data with each parts order: 1.

2.

3.

4.

5.

6.

Purchase Order Number Model and Serial Number of Machine Part Numbers Part Descriptions Quantity of each part desired Method of transportation

Confirm all telephone and telegraph orders in writing. Be sure these orders are marked "Confirmation", to avoid duplication of orders.

INSPECTION OF SHIPMENTS

Carefully inspect all shipments upon arrival. In the event of loss or damage, do not accept the shipment until the transportation company either makes a notation on the freight bill, or gives you an inspection report covering said damage or loss. In the event of concealed damage or loss, notify the carrier at once (within 20 days) requesting that an inspection be made and damage or loss be acknowledged.

USE ONLY GENUINE HEIN-WERNER PARTS FOR MAXIMUM PERFORMANCE

CED 63

ii

WHERE TO ORDER PARTS

Contact the Hein-Werner dealer in your area when placing parts orders. Hein-Werner Dealers are conveniently located throughout the United States and Canada. These Dealers maintain a stock of genuine Hein-Werner replacement parts so that orders are filled as quickly as possible. To aid the dealer in processing your order promptly and correctly, you should supply the following information:

1.

2.

3.

4.

5.

Model and Serial Number of your Machine.

Part Numbers of items desired Part Descriptions Quantity of each part desired Method of transportation INSPECTION OF SHIPMENTS

Carefully inspect all shipments upon arrival. In the event of loss or damage, do not accept the shipment until the transportation company either makes a notation on the freight bill, or gives you an inspection report covering said damage or loss. In the event of concealed damage or loss, notify the carrier at once (within 20 days) requesting that an inspection be made and damage or loss be acknowledged.

USE ONLY GENUINE HEIN-WERNER PARTS FOR MAXIMUM PERFORMANCE

CED 63

ii

OPERATION The information in this manual is designed to furnish the owner and operator of the Hein-Werner C-12HD Backhoe with the basic information needed to understand the operation of the machine.

For safe and efficient operation, first become familiar with the location and purpose of all controls and instruments. Study the following pages carefully, regardless of your previous experience.

SAFETY FIRST THE COMPLETE OBSERVANCE of this one simple motto would prevent many thousand serious injuries each year.

CED 63

PAGE 1

ENGINE CONTROLS AND INSTRUMENTS

4

6

5

7

1

9

10

1.

Shut-off Control

6.

Oil Pressure Gauge

2.

Emergency Shut-off Control

7.

Ammeter Gauge

3.

Throttle Control

8.

Hydraulic Temperature Warning Light

4.

Fuel Gauge

9.

Toggle Switch

5.

Water Temperature Gauge

CED 63

10.

Ignition Switch

PAGE 2

ENGINE AND INSTRUMENTS

When operating the machine, periodic attention should be given to the instrument panel gauges and warning lights. This will prevent any minor malfunction from becoming a major breakdown.

GAUGES

NOTE: The tachometer located at the rear of the engine is an integral part of the Detroit Diesel. The engine governed speed has been preset at 2650 R.P.M. (Clutch disengaged) at full throttle. The engine R.P.M. should never exceed 2650 R.P.M. at full throttle.

5. Water Temperature Gauge: Under normal engine operating conditions the water temperature should be 160 ° to 185 ° F. 6. Oil Pressure Gauge: The oil pressure gauge should indicate 40 to 60 P.S.I. at full throttle. Should the pressure fall below this range (other than at idle) immediately shut off the engine and investigate the cause.

7. Ammeter Gauge: The ammeter indicates either battery charge or discharge depending on the condition of the battery.

WARNING LIGHTS

8. Hydraulic Temperature Warning Light: A red light located on the instrument panel will appear should the hydraulic oil overheat. If this happens, immediately stop the engine and investigate as to the cause.

9. Toggle Switch: To test the hydraulic temperature warning light (red light) use the toggle switch.

CED 63

PAGE 3

DIGGING CONTROL LEVERS

1. Boom Control Lever 2. Swing Control Lever 3. Dipstick Control Pedal 4.

Bucket Control Pedal

5. Boom Speed Boost Button 6. Dipstick Speed Boost Button

CED 63

PAGE 4

DIGGING CONTROL LEVERS

Operators not familiar with hydraulic machines may tend to over-control and thereby cause rough operation of the machine. It is, therefore, recommended that the machine be operated at half throttle or less until the operator becomes thoroughly oriented with the controls.

1. Boom Control Lever A. To raise the boom, pull back on the boom control lever.

If greater lift speed is desired, push the boom speed boost control button while pulling back on the boom control lever.

B. When the boom control lever is returned to the neutral position (center) the boom will remain positioned.

C. To lower the boom, push the boom control lever forward.

2. Swing Control Lever A. To swing the platform in a clockwise direction, pull the swing control lever back.

B. To swing the platform in a counter-clockwise direction, push the swing control lever forward.

C. To stop swing rotation in either direction, feather the swing control lever into the opposite direction until rotation stops.

CAUTION: WHENEVER THE MACHINE IS NOT BEING OPERATED, ALWAYS ENGAGE SWING BRAKE AND LOWER BUCKET TO THE GROUND. 3. Dipstick Control Pedal A. To tuck the dipstick, push down with the heel of the right foot on the dipstick control pedal. If greater digging speed is desired, push the dipstick speed boost control button while heeling the dipstick control pedal.

B. When the dipstick control pedal is returned to the neutral position (center) the dipstick will remain positioned.

C. To extend the dipstick, push down with toe of the right foot on the dipstick control pedal.

CED 63

PAGE 5

DIGGING CONTROL LEVERS

4. Bucket Control Pedal A. To curl bucket, push down with the heel of the left foot on the bucket control pedal.

B. When the bucket control pedal is returned to the neutral position (center) the bucket will remain positioned.

C. To dump bucket, push down with toe of the left foot on the bucket control pedal.

A Careful Operator IS THE BEST INSURANCE AGAINST AN ACCIDENT

CED 63

PAGE 6

t M 5

O f

e t

5

5

t

5 5

•

e

i

P

5

S

\ S

5

Pi

FORWARD

5

'o %

\ BACKWARD

LEFT t j HAND

RIGHT HAND

r

„ 4 1

kr. I II . 11

)

,r) ,

PROPEL CONTROL LEVERS

The crawler undercarriage is in the accepted digging and traveling position when the drive sprockets are to the rear. Follow the operating instructions below when the crawler is in this position. When the crawler is in a reversed position (drive sprockets at the front) reverse the directional instructions.

1. To propel machine forward, push both levers forward.

2. To propel machine backward, pull both levers backward.

3. To make a right hand turn, use any of the following procedures: A. Push the left lever forward and leave the right lever in neutral.

B. Pull the left lever forward and leave the left lever in neutral.

C. When working in close quarters, or when speed is required, a right hand "spin" turn may be made by simultaneously pushing the left hand lever forward and the right hand lever backward.

4. To make a left hand turn, reverse the above directions.

NOTE:

CAUTION:

CED 63

The control valves in the propel hydraulic circuit are detented to hold the spools in either of the two positions. The spool will not return to the neutral position unless the control lever is manually returned to the neutral position.

WHENEVER MACHINE IS NOT BEING OPERATED ALWAYS ENGAGE PROPEL BRAKE AND LOWER BUCKET TO THE GROUND. PAGE 7

PREPARING TO START ENGINE

CAUTION: BEFORE STARTING THE ENGINE, BE SURE THE AREA IS ADEQUATELY VENTILATED. Prior to starting the engine, the following daily checks and servicing must be performed.

DAILY CHECK LIST 1. Check The Engine Crank Case Oil Level.

2. Check The Hydraulic Reservoir Oil Level.

3. Check The Radiator Coolant Level.

4. Check The Battery Electrolyte Level.

5. Check All Control Valves For The Neutral Position 6. Perform Daily Lubrication

STARTING THE ENGINE

Before starting the engine for the first time, refer to the engine manufacturers operating manual.

NOTE: The engine may require the use of a cold weather starting aid in areas with low ambient temperatures.

1. Make sure the manual shut-down control is in the open position.

2. Set the throttle control in the idle position. Engage starting motor.

If the engine fails to start within 30 seconds, disengage starter and allow the starting motor to cool a few minutes before trying again.

3. Check the oil pressure gauge immediately after starting the engine. If there is no oil pressure indicated within 10-20 seconds, stop the engine and check the lubricating system. The minimum oil pressure should be at least 18 P.S.I. at 1200 R.P.M. The oil pressure at normal operating speed should be 40-60 P.S.I. 4. Run engine at quarter throttle and no load for approximately five minutes allowing it to warm up, before applying a load.

CED 63

PAGE 8

STOPPING THE ENGINE

1. Release the load and decrease the engine speed.

2. Allow the engine to run at half speed or lower with no load for five minutes before closing the throttle and stopping the engine.

NOTE: The emergency shut-down control should never be used to stop the engine except in an emergency.

CED 63

PAGE 9

LUBRICATION

CHECK RADIATOR COOLANT LEVEL DAILY BEFORE START UP

DRAIN FUEL FILTERS PERIODICALLY

CHECK RESERVOIR OIL LEVEL DAILY BEFORE START UP SAE 20 HYDRAULIC OIL

CHANGE HYDRAULIC FILTER ELEMENT EVERY 250-350 HOURS

American Oil — Rykon No. 21 Cities Service — Pacemaker XD-20 Conoco — Super Hyd. 21 Gulf — Harmony 48 AW Humble — Nuto H48 Mobil — D.T.E. 25 Phillips — Magnus A215 Shell — Tellus 929 Sinclair — Duro AW-21 Sunoco — Sunvis 821 Texaco — Rando HD-C CHECK SWING GEAR BOX OIL LEVEL DAILY SAE 80-90 GEAR OIL

FOR ADDITIONAL SERVICE & MAINTENANCE INSTRUCTIONS REFER TO ENGINE MANUAL

LUBRICATE SWING BEARING WEEKLY GENERAL PURPOSE GREASE CHECK ENGINE OIL LEVEL DAILY BEFORE START UP

LUBRICATE OPEN SWING GEAR DAILY CRATER COMPOUND

CHECK BATTERY WATER LEVEL DAILY BEFORE START UP

LUBRICATE CONTROL LINKAGE DAILY GENERAL PURPOSE GREASE

LUBRICATE CLUTCH BEARING WEEKLY GENERAL PURPOSE GREASE

CHECK PUMP DRIVE GEAR BOX OIL LEVEL DAILY SAE 80-90 GEAR OIL

HEM mffern CED 63

LUBRICATE SWING GEAR BOX WEEKLY GENERAL PURPOSE GREASE

EFFECTIVE

UPPER STRUCTURE LUBRICATION

SN Date

PAGE 1

NOTE: IN SEVERE DIGGING CONDITIONS AND FOR LONGER LIFE LUBRICATE BUCKET LINKAGE 3 TIMES DAILY.

LUBRICATE ALL FITTINGS ON DIGGING MEMBER DAILY WITH A GENERAL PURPOSE GREASE.

ITEM NO.

DESCRIPTION

1

BOOM CYLINDER BASE PINS (2 FITTINGS)

2

BOOM PIVOT BUSHINGS (1 FITTING)

3

BOOM CYLINDER ROD PINS (2 FITTINGS)

4

DIPSTICK CYLINDER BASE PIN (2 FITTINGS)

5

DIPSTICK CYLINDER ROD PIN (1 FITTING)

6

DIPSTICK PIVOT PIN (1 FITTING)

7

BUCKET CYLINDER BASE PIN (1 FITTING)

8

BUCKET CYLINDER ROD PIN (1 FITTING)

9

BUCKET LINK BUSHINGS (4 FITTINGS)

10

BUCKET LINK PIN BUSHINGS (1 FITTING)

11

BUCKET PIN BUSHINGS (1 FITTING)

feisnizIr CED 63

DIGGING MEMBER

LUBRICATION

PAGE 2

NOTE: IN SEVERE DIGGING CONDITIONS AND FOR LONGER LIFE LUBRICATE BUCKET LINKAGE 3 TIMES DAILY. LUBRICATE ALL FITTINGS ON DIGGING MEMBER DAILY WITH A GENERAL PURPOSE GREASE.

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11

DESCRIPTION BOOM CYLINDER BASE BINS (2 FITTINGS) BOOM PIVOT BUSHINGS (2 FITTINGS) BOOM CYLINDER ROD PINS (2 FITTINGS) DIPSTICK CYLINDER BASE PIN (1 FITTING) DIPSTICK CYLINDER ROD PIN (1 FITTING) DIPSTICK PIVOT PIN (1 FITTING) BUCKET CYLINDER BASE PIN (1 FITTING) BUCKET CYLINDER ROD PIN (1 FITTING) BUCKET LINK BUSHINGS (4 FITTINGS) BUCKET LINK PIN BUSHINGS (1 FITTING) BUCKET PIN BUSHINGS (1 FITTING)

DIGGING MEMBER

'am/hrEin "Si/IMP CE D 6 3 nIm

LUBRICATION

EFFECTIVE

SN 12-2374 Date January 2, 1974

PAGE 2 J1.1.11...lim

CHECK PROPEL GEAR BOX OIL LEVELS DAILY SAE 80-90 GEAR OIL

IF EQUIPPED WITH HEIN-WERNER ROLLERS LUBRICATE DAILY GENERAL PURPOSE GREASE

ma

r:

A,

rot Io

IIII

IcImgcmg

6

WIN mW aMMMI m • I com

m

LUBRICATE IDLER SHAFTS DAILY (4 FITTINGS) GENERAL PURPOSE GREASE

wm1

CED 63

AC ROLLERS HAVE LIFETIME SEALS

70/Ein ASP/Weis

CHECK TUMBLER SHAFT OUT BOARD BEARING DAILY GENERAL PURPOSE GREASE

UNDERCARRIAGE LUBRICATION

LUBRICATE HYDRA-SWIVEL CAP WEEKLY (1 FITTING) GENERAL PURPOSE GREASE

EFFECTIVE

SN 12-2218 Date 3-7-73

PAGE 3

HEIN-WERNER

Ready-Reference Filter Element Listing for Model 10, 10HD & 12HD with Detroit Diesel 4-53

ENGINE OIL All machines use GM #PF132.

PRIMARY FUEL All machines use GM #T60.

SECONDARY FUEL All machines use GM #T58.

AIR FILTER 1. All machines with Farr #P-12, use Hein-Werner #450601.

2. All machines with Farr #P-16, use Hein-Werner #450683.

3. All machines from serial number 12-1658 to 12-1848 use Hein-Werner #450787 (vendor #250C29-S) or 450967 (vendor #P1020571).

4. All machines from serial number 12-1849 to 12-1975, use Hein-Werner #450787.

5. All machines after serial number 12-1976 thru current production, use Hein-Werner #300265.

HYDRAULIC OIL 1. All machines #450330.

2. All machines #450331.

3. All machines 4. All machines

with Gresen disposable paper elements, use Hein-Werner with Gresen cleanable mesh elements, use Hein-Werner with Ripley filters, use Hein-Werner #050026. after serial number 12-2031, use Hein-Werner #050063.

Note: Engine oil and fuel filters may be obtained at your local Detroit Diesel Distributor.

CED 63

PAGE 4

MAINTENANCE

CHECKING AND SETTING HYDRAULIC PRESSURES

The control valves, inline reliefs, and crossover relief valves were correctly adjusted before the backhoe was shipped.

Only the factory and dealer representatives are authorized to adjust the relief valve settings. TAMPERING WITH THE RELIEF VALVE SETTINGS WILL RESULT IN VOIDING THE WARRANTY OF THE MACHINE. However, in the event of any malfunction regarding the hydraulic pressure, check and/or reset the relief pressures as follows:

NOTE The following is a list of tools necessary to properly check or reset the relief valve pressures: 1. 0-3000 P.S.I. gauge 2. 11/16 open end wrench 3. 3/16 inch allen wrench 4. 5/8 inch open end wrench 5. 9/16 inch open end wrench 6. Straight shank screwdriver All hydraulic pressures are to be set with the engine running at full throttle.

CED 63

PAGE 1

RELIEF CARTRIDGE END CAP

CHECKING BOOM INLINE RELIEF AND MAIN RELIEF PRESSURES

INLINE RELIEF VALVE

ACORN NUT & ADJUSTING SCREW

BOOM CONTROL VALVE

MAIN RELIEF VALVE

1. Install gauge in rod end of boom cylinder or in boom control valve test adapter.

2. Remove acorn nut to expose the main relief adjusting screw.

Loosen adjusting screw jam nut, turning jam nut counterclockwise on adjusting screw until jam nut has backed off about one quarter of an inch.

3

Run the boom cylinder rods in until they dead head. To achieve a dead head on the rod side of the boom cylinders either lower the boom into an excavation or disconnect the ends of the boom cylinder from the boom. While dead heading the boom in this position, turn the main relief adjusting screw clockwise until the boom inline relief begins to bypass. This should occur at 2350 to 2400 P.S.I. Continue turning the adadjusting screw clockwise two full turns, no increase in gauge reading (P.S.I.) should appear. If gauge reading increases, the inline relief must be reset.

4. If the inline relief has failed to relieve at the correct pressure (2350 to 2400 P.S.I.) then it must be readjusted. To adjust the inline relief, remove the valve end cap and either turn the inline relief adjusting screw clockwise to increase pressure or counterclockwise to decrease pressure.

5

After the inline relief has been set, continue to dead head the boom cylinders in the same direction as before. While dead heading the cylinder, turn the main relief adjusting screw counterclockwise until the gauge reading is 2150 P.S.I.

6. Stop dead heading the boom cylinders. While holding the main relief adjust screw with a screwdriver, lock the jam nut into place. Replace acorn nut on adjusting screw.

CED 63

PAGE 2

INLINE RELIEF VALVE

RELIEF CARTRIDGE END CAP

CHECKING DIPSTICK INLINE RELIEF AND MAIN RELIEF PRESSURES

kai-S

ACORN NUT ADJUSTING SCREW

DIPSTICK CONTROL VALVE

MAIN RELIEF VALVE

1. Install gauge in base of dipstick cylinder or in dipstick control valve test adapter.

2. Remove acorn nut to expose the main relief adjusting screw.

Loosen adjusting screw jam nut, turning jam nut counter-clockwise on adjusting screw until jam nut has backed off about one-quarter of an inch.

3. Run the dipstick cylinder rod out until it dead heads.

While holding the dipstick control in this position, turn the main relief adjusting screw clockwise until the dipstick inline relief begins to bypass. This should occur at 2350 to 2400 P.S.I. Continue turning the adjusting screw clockwise two full turns, no increase in gauge reading (P.S.I.) should appear. If gauge reading increases, the inline relief must be reset.

4.

If the inline relief has failed to relieve at the correct pressure (2350 to 2400 P.S.I.) then it must be readjusted. To adjust the inline relief, remove the valve end cap and either turn the inline relief adjusting screw clockwise to increase pressure or counterclockwise to decrease pressure.

5. After the inline relief has been set, continue to dead head the dipstick cylinder in the same direction as before. While dead heading the cylinder turn the main relief adjusting screw counter-clockwise until the gauge reading is 2150 P.S.I. 6

CED 63

Stop dead heading the dipstick cylinder. While holding the main relief adjusting screw with a screwdriver, lock the jam nut into place. Replace acorn nut on adjusting screw.

PAGE 3

GAUGES

SWING CROSSOVER RELIEF

CHECKING SWING CROSSOVER RELIEFS AND MAIN RELIEF PRESSURES

ACORN NUT & ADJUSTING SCREW

RELIEF CARTRIDGE END CAP

SWING CONTROL VALVE

MAIN RELIEF VALVE

1. Install gauge or gauges in swing crossover relief valve gauge ports.

2. Apply swing brake or block swing in both directions by putting bucket teeth into the ground and applying down pressure with the boom.

3. Remove acorn nut to expose the main relief adjusting screw. Loosen adjusting screw jam nut, turning jam nut counter-clockwise on adjusting screw until jam nut has backed off about one-quarter of an inch.

4. Move swing control lever completely forward. While holding the swing lever in this position, turn the main relief adjusting screw clockwise until the respective swing crossover relief valve begins to bypass.

This should occur at 2200 to 2250 P.S.I. Continue turning adjusting screw clockwise two full turns, no increase in gauge reading (P.S.I.) should appear. If gauge reading increases, the crossover relief valve must be reset. The procedure for checking the opposite direction of swing pressure is identical except for one exception: the swing control lever must be moved completely backward.

5.

If the swing crossover relief has failed to relieve at the correct pressure (2200 to 2250 P.S.I.), then it must be readjusted. To adjust the crossover relief, remove the valve end cap and turn the adjusting screw clockwise to increase pressure or turn the adjusting screw counter-clockwise to decrease pressure.

6. After the swing crossover reliefs have been set, continue to hold the swing lever in the last direction which was checked. While doing this, turn the main relief adjusting screw counter-clockwise until the gauge reading is 2000 P.S.I. 7. Return the swing lever to the neutral position. While holding the main relief adjusting screw with a screwdriver, lock the jam nut into place.

Replace acorn nut on adjusting screw.

CED 63

PAGE 4

CHECKING SPEED BOOST SOLENOID RELIEF PRESSURE

RELIEF CARTRIDGE END CAP

SOLENOID RELIEF VALVE SPEED BOOST SOLENOID VALVE

1. Install gauge in the base of boom cylinder.

2. Run the boom cylinder rod out until it dead heads.

3. Making sure the boom control is in the neutral position; activate the speed boost on the circuit. The P.S.I. reading for the speed boost solenoid should be 2300 P.S.I. 4. If the speed boost solenoid relief has failed to relieve at the correct pressure (2300 P.S.I.), then it must be readjusted. To adjust the speed boost solenoid relief, remove the valve end cap and turn the solenoid adjusting screw clockwise to increase pressure or turn the adjusting screw counter-clockwise to decrease pressure.

5. After the speed boost solenoid relief has been set, discontinue activating speed boost button. Replace valve end cap.

CED 63

PAGE 5

CHECKING PROPEL CROSSOVER RELIEF PRESSURES

1. Install gauge in propel crossover relief valve or in dipstick control valve test adapter.

2. Deadhead or block propel system in the direction to be tested.

To achieve a deadhead on the propel system, place an obstruction between the track rollers and track shoes to stop the track system's operation.

3. Remove acorn nut to expose the main relief adjusting screw.

Loosen adjusting screw jam nut, turning jam nut counterclockwise on adjusting screw until jam nut has backed off about one quarter of an inch.

4. Move the appropriate propel control lever completely forward or backward. While holding the propel lever in this position, turn the main relief adjusting screw clockwise until the respective propel crossover relief valve begins to bypass. This should occur at 2350 to 2400 P.S.I. Continue turning adjusting screw clockwise two full turns, no increase in gauge reading (P.S.I.) should appear. Reverse the procedure to check the opposite direction.

5.

If the propel crossover relief has failed to relieve at the correct pressure (2350 to 2400 P.S.I.), then it must be readjusted. To adjust the crossover relief, remove the valve end cap and turn the adjusting screw clockwise to increase pressure or turn the adjusting screw counter-clockwise to decrease pressure.

6. After the propel crossover reliefs have been set, continue to hold the propel lever in the last direction which was checked. While doing this, turn the main relief adjusting screw counter-clockwise until the gauge reading is 2150 P.S.T. 7

Return the propel to the neutral position. While holding the main relief adjusting screw with a screwdriver, lock the jam nut into place. Replace acorn nut on adjusting screw.

NOTE: When checking the boom propel system, install gauge in boom control valve test adapter and follow the instructions listed above.

CED 63

PAGE 6

15

p\

ITEM

13

12

NUMBER

1 50006 -): 2 :50()27s 3 500064 4 500065 5 500066 6 500067 7 500068 8500069 9 • 500070 10 .400200 11 500122 12 500073 13 500072 14 500071 15 • 500061 16 120241

DESCRIPTION

QTY

Grease Gun Spanner Wrench Open End Wrench, 7/S" and 1" Open End•Wrench; 1 1/4" Universal Joint Socket, 1 1/16"• Socket, 1 1/8" Socket, 15/16" Extension, 12" Drain Valve Handle-Oil Reservoir Open End Wrench, 1 3/8" Sliding "T" Handle • Tube Wrench, 1 1/2" Crescent Wrench Tool Box Tee Handle

1 1

1 1

1

NOTE: For Complete Tool Kit for Crawler-Mounted Machines, Order Part Number 500203

7014/brOPPIW. CED 63

TOOL KIT - UPPER

mm°

MAINTENANCE

EFFECTIVE

(500126) SN Date

12-1952 November 23,

1971

PAGE 7

ITEM 1 2 3

4 5 6 7

PART NUMBER

DESCRIPTION

500279 500125 800085 800012 800525 800842 500123 800883 800886 800884

1 Pushmaster Unit 1 Chain Adapter 16 1/8" Shim 12 1/4" Shim 10 16 Ga. Shim 4 1/2" Shim 1 1-15/16" Socket Rear Adapter - 6" 1 1 Front Adapter - 9" Adapter Extenstion - 3 1/2" 1

QTY

NOTE: For Complete Tool Kit for Crawler-Mounted Machines, Order Part Number 500252

CRAWLER MODELS ONLY

01frth "ffErner

SN

A CED 63

EFFECTIVE

TOOL KIT - CRAWLER (500210) MAINTENANCE

12-1736 Date August 31,1970

PAGE 8

/ffErinAiePAS7P/*/

CONSTRUCTION EQUIPMENT DIVISION VVAUKESHA, WISCONSIN

GENERAL LUBRICATION & MAINTENANCE GUIDE

(Silver and Black) 900003

41111 10 Hours or Daily

i///

900019

/7/2/ 900020

/ Check Daily

e

900021

Digging Member

Multipurpose Grease

Tumbler Shafts

Multipurpose Grease

Idler Shafts

Multipurpose Grease

Track Rollers

Multipurpose Grease

Control Linkage

Multipurpose Grease

Open Swing Gear

Open Gear Lube Crater Compound

Swing Gear Box

SAE 80-90 Gear Oil

Pump Drive Gear Box

SAE 80-90 Gear Oil

Propel Gear Box

SAE 80-90 Gear Oil

Engine Crankcase

SAE 30 Engine Oil

Hydraulic Reservoir

SAE 20 Hydraulic Oil

Radiator Coolant Level

Water/Antifreeze

Battery Level

Water

Swing Gear Box

Multipurpose Grease

Clutch Bearing

Multipurpose Grease

Swing Bearing

Multipurpose Grease

Hydra-Swivel Cap

Multipurpose Grease

Drive Chains

SAE 30-40 Motor Oil

Check Daily

0

-rh-t1 [ ill : Check Daily

imapt 40 Hours or Weekly

(Brown and Yellow) 900000

11 11 I lk 1

Pl".111

4

Periodically

Left Hand Barricade 900002

Change 250-350 Hours

Hydraulic Filter Elements

As Equipped

Engine Filters

Refer to Engine Manual

■ WARNING

THE GUIDE INDICATES GENERAL SERVICING AND DOES NOT SHOW SPECIFIC AREAS TO- BE SERVICED. REFER TO THE LUBRICATION SECTION OF YOUR MANUAL FOR COMPLETE INSTRUCTIONS.

Right Hand Barricade 900001

00/.1, "NP/Wer/ CED 63

Lubrication Guide 900131 EFFECTIVE

DECALS MAINTENANCE

SN Date

PAGE 9

ITEM 1 2 3

7

4 5 6 7 8 9 10

PART NUMBER

DESCRIPTION

401158 401160 401156 400195 150156 400017 150155 990045 990044 120008

As Tooth Pin-25 Series As Tooth Point-25 Series As Tooth Shank-25 Series Bolt R.H. Side Cutter Nut L.H. Side Cutter L.H. Hinge Plate W/Bosses R.H. Hinge Plate W/Bosses As Boss

QTY Req'd Req'd Req'd 8 1 8 1 1 1 Req'd

10

10

10

BUCKET PARTS CED 63

ATTACHMENTS

PAGE 1

ITEM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART NUMBER

DESCRIPTION

110362 110363 110220 210255 220028 110179 210257 100493 100494 100495 140027 220027 150257 400015 040100 400018 400026 110029 210281

Dipstick (Long) Dipstick (short) Housing W/Bushings Pin Bushing (3" Steel) Housing Pin Shim (7 Ga.) Shim (12 Ga.) Shim (18 Ga.) Bell Crank Bushing (1 1/2" Steel) Bucket Link (W/Bushings) Grease Fitting Bucket Cylinder Lock Pin Cotter Pin Mounting Bracket Pin

QTY

1 1 3 1 8 3 3 As Req'd As Req'd As Req'd 2 2 1 6 1 5 5 1 1

NOTE: When using 110362 or 110363 dipstick with 100334 boom, use a 210290 pivot pin.

DIPSTICK AND BUCKET CYLINDER LINKAGE mm.701/7/0111IVIAPP

CED 63

ATTACHMENTS

EFFECTIVE SN 12-2374 Date Jan. 2, 1974)

PAGE "!"...2

PART ITEM NUMBER DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

---71 OE& Winn," CED 63

100760 210136 400015 400056 400318 220000 210155 210154 400307 040236 210157 900027 400514 900026 900028 220077 400011 100777 100493 100494 100495

QTY

Boom Pin Grease Fitting Lockwasher Bolt Bushing Pin Pin Retainer Bolt Boom Cylinder Pin H.D. Nameplate Drive Screw C-12 Nameplate H.W. Nameplate Spacer Nut Boom Point Assembly Shim (7 Ga.) Shim (12 Ga.) Shim (18 Ga.)

1 2 4 8 4 4 1 2 4 2 2 2 36 2 2 1 1 1 As Req'd As Req'd As Req'd

BOOM ASSEMBLY

ATTACHMENTS

ITEM

PART NUMBER

DESCRIPTION

20 21 22 23 24 25 26

210254 210255 400018 400026 040135 210028 100771

Pin Pin Lock Pin Cotter Pin Dipstick Cylinder Pin Mounting Bracket

QTY 1 1 2 2 1 1 1

EFFECTIVE

SN 12-2374 Date. January 2, 1974

P AGE 3

22

16

DESCRIPTION

12

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

10 11

400015 020032 040377 220060 030638 020101 020285 040376 400011 010027 040080 040379 220066 040378 400354 010010 040142 010043 040140 040120 040141 010014 010013

Grease Fitting Elbow Base W/Bushing Bushing Only Tube W/Elbow Plug Elbow Tube W/Bushing Rod Nut Piston Ring Piston Rod End W/Bushing Bushing Only Rod W/Bushing Bolt Wiper Seal Flange Rod Packing Set Spring Retainer Spring Ram Head Head 0-Ring Rod 0-Ring

QTY 2 1 1 1 1

2 1 1 1

4 1 1 1 1

6 1 1 1 1 10 1 1 1

BUCKET CYLINDER (040100) CED 63

CYLINDERS

PAGE 1

100 I 16 ____ 1415 ____ 13

ITEM 1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

11

...m

7//frien"NPrniir

CED 63

PART NUMBER

DESCRIPTION

040369 220060 400015 020032 030042 020101 020285 040368 400011 010027 040080 040371 040370 400354 010041 040119 010042 040117 040120 040118 010014 010013

Base End W/Bushing Bushing Only Grease Fitting Elbow Tube and Elbow Assembly Plug Elbow Tube W/Bushing Rod Nut Piston Ring Piston Rod End W/Bushing Rod W/Bushing Bolt Wiper Seal Gland Nut Packing Set Spring Retainer Spring Ram Head Head 0-Ring Rod 0-Ring

QTY 1

3 3 1 1 1 1 1 1

4 1 1 1

6 1 1 1 1 10 1 1 1

DIPSTICK CYLINDER (040135) CYLINDERS

PAGE 2

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

400015 040373 220060 020101 030720 020003 030719 020285 400011 010027 040080 040375 040374 400354 010010 040142 010043 040140 040120 040141 010014 010013 020154 040372

Grease Fitting Base W/Bushing Bushing Only Plug Short Tube W/Tee & Elbow Plug Long Tube W/Tee Elbow - Long Tube Rod Nut Piston Ring Piston Rod End W/Bushing Rod W/Bushing Bolt Wiper Seal Gland Nut Packing Set Spring Retainer Spring Ram Head Head 0-Ring Rod 0-Ring 45 ° Elbow Cylinder Weldment W/Bushing

2 1 2 2 1 2 1 1 1 4 1 1 1 6 1 1 1 1 10 1 1 1 2 1

22

2 - _J

13 12

10 ALL EXCEPT C-10 & T-10

70/iVen "NAVY/EP CED 63

5 1/4" BOOM LIFT CYLINDER (040236) CYLINDERS

PAGE 3

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

040381 220067 400015 040380 030343 020212 020101 400011 010027 040080 040375 220060 040382 400354 010010 040142 010043 040140 040120 040141 010014 010013

Base W/Bushings Bushing Only Grease Fitting Cylinder Tube W/Bushings Tube W/Swivel Elbow Plug Rod Nut Piston Ring Piston Rod End W/Bushing Bushing Only Rod W/Bushing Bolt Wiper Seal Gland Nut Packing Set Spring Retainer Spring Ram Head 0-Ring 0-Ring

1 2 3 1 2 2 2 1 4 1 1 1 1 6 1 1 1 1 10 1 1 1

3

20 17

13

11

CARRIER MODELS ONLY

---Affethmilimer CED 63

OUTRIGGER CYLINDER (040228) CYLINDERS

PAGE 4

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6.

7 8 9 10 11 12 13

450394 451363 450756 450437 45040• 450418 450436 450764 450399 450757 450765 450061 450762

Seal Shaft End Cover Plug Seal Roller Bearing Thrust Plate Pocket Seal Shaft & Gear Gasket Gear Housing Port End Cover Washer Bolt

QTY 1 1 2 1 4 2 1 Set 1 2 1 1 4 4

3 2

VENDOR NUMBER !P50A-278-BEOM-20-7 :

--/ffeth-NproPr CEO 63

PUMP (GMC) 000173

EFFECTIVE

PUMPS AND MOTORS

SN 12-2040 Date .March 27, 1972

/47:7

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13

450394 451357 450756 450437 450403 450418 450767 451358 450399 451360.

450765 450061 450883

Lip Seal Shaft End Cover Plug Shaft Seal Roller Bearing Thrust Plate Pocket Seal Matched (ears Casket Housing Port End Cover Washer Bolt

QTY 1 1 1 2 4 2 1 Strip 1 Set 2 1 1 4 4

10

.•"

3 2 •••

7 13

VENDOR NUMBER

P 50A-278-BEOM-17-7

fithl4gPfliPt CED 63

PUMP (CUMMINS) 000188

PUMPS AND MOTORS

EFFECTIVE

SN 12-2040 Date March 27, 1972

PAGE 2

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13

450394 451357 450756 450473 450403 450T67 450418 450399 451356 451354 450765 450061 451353

Lip Seal Shaft End Cover Plug Seal Ring Roller Bearing Pocket Seal Thrust Plate Gasket Housing Matched Gears Port End Cover Washer Bolt

QTY 1 1 1 2 4 1 Strip 2 2 1 1 Set 1 4 4

9

VENDOR NUMBER P50A-278-BEOG-15-7

Hein "NPrn PP .

CED 63

SWING PUMP (GMC) 000171 PUMPS AND MOTORS

EFFECTIVE

SN 12-2040 Date March 27, 1972

PAGE 3

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13

450394 451357 450756 450437 450403 450767 450418 451362 450399 450760 450765 450061 451361

Lip Seal Shaft End Cover Plug Seal Ring Roller Bearing Pocket Seal Thrust Plate Matched Gears Gasket Housing Port End Cover Washer Bolt

QTY 1 1 1 2 4 1 Strip 2 1 Set 2 1 1 4 4

VENDOR NUMBER P50A 278 BEOG 12 7 -

77 :77/

nma/proPr !!!"

SWING PUMP (CUMMINS) 000197 PUMPS AND MOTORS

-

-

-

EFFECTIVE

SW12....2040 Date March 27, 1972

•

PAGE 4

ITEM *1 2 3 *4 *5 *6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

PART NUMBER 450422 450444 450397 450435 450415 450416 450445 450404 450052 450039 450756 450420 450417 450403 450418 450409 450399 450757 450753 450037 450009 450053 450018 450442 450758 450051 450760 450016 450031 450061 450006 450043 450759

8 9 DESCRIPTION Retainer Ring Key Drive Shaft Seal Retainer Seal 0-Ring Roller Bearing Spacer Retainer Ring Shaft End Cover Plug Bushing Spring Roller Bearing Thrust Plate Pocket Seal Gasket Gear Housing Matched Gear Spacer Bushing Roll Pin Bearing Carrier Connecting Shaft Connecting Stud Lock Nut Gear Housing Matched Gear Port End Cover Washer Stud Nut Stud

10 \ j.

QTY

11

1 1 1 1 1 1 1 1 1 1

20

22

21

23 \

22 20 \

21

23

14

18 17 6 15 \\

1 13 14

12 2 3 Sets 6 2 2 2 4 4 2 2 1

31 30 \ ,( i

12 29

16

32 \ 4 ;)

14 15 17

28 33

27 17 26 \ 25 \

16

1 Set 4 2 4 2

REF: Vendor Part Number P2SX 142 BYRZ 20-11 BRZ 20-1 BRS 12-1

21

* These parts included in service kit, part number 000058

ALL WITH TANDEM PUMP TANDEM PUMP (000097) PUMPS AND MOTORS

EFFECTIVE

PAGE 5

ITEM 1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17

PART NUMBER

DESCRIPTION

450394 451357 450756 450437 450403 450767 450418 450399 451356 451570 451573 451566 451569 450765 450061 451564 450043

Shaft Seal Shaft-End Cover Plug Seal Ring Roller Bearing Pocket Seals Thrust Plate Gasket Seal Gear Housing Matched Gears Bearing Carrier Shaft Matched Gears Port End Cover Washer Stud Nut

QTY 1 1 1 4 8 2 Strips 4 4 2 1 Set 1 1 1 Set 1 4 4 4

9 fS

‘

4

VENDOR NUMBER P50B-278-BIOG 15-7 DOG 15-1

4

WDmiePrner

CED 63

5 7 TANDEM POWER BOOST PUMP (GMC) 000172 'PUMPS AND MOTORS

EFFECTIVE SN 12-2040 Date March 27, 1972

PAGE 6

ITEM

PART NUMBER

DESCRIPTION

*1 2 *3 *4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

450549 450407 450400 450416 450445 450404 450052 450438 450401 450420 450417 450403 450418 450409 450399 450761 450753 450031 450061 450762

Retainer Ring Drive Shaft Seal 0-Ring Roller Bearing Spacer Retainer Ring Shaft End Cover Check Assembly Shaft Bushing Spring Roller Bearing Thrust Plate Pocket Seal Gasket Gear Housing Matched Gear Port End Cover Washer Bolt .

QTY 1 1 1 1 1 1 1 1 2 1 1 4 2 1 Set 2 1 I Set 1 4 4

REF: Vendor Part Number M25X-778-BEVL-20-70

* These parts included in service kit, part number 000057

"""""I""7,friff "NEMPIP CED 63

SWING MOTOR (000080) PUMPS AND MOTORS

PAGE 7

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

20 21 22 23 24

PART NUMBER

DESCRIPTION

451370 451371 451372 451373 451374 451614 451615 451377 451378 451379 451380 451381 451382 451383 451384 451385 451386 451387 451388 451389 451390 451391 451613 451393

Socket Head Capscrew End Cap Section Seal Needle Bearing Dowel Pin Cam Ring Assembly Cam Ring Rotor Vane Vane Spring Spring Guide Dowel Pin Front Port Plate Assembly Shuttle Pin Section Seal Section Seal Coil Spring External Snap Ring Internal Snap Ring Rotary Shaft Seal Snap Ring Ball Bearing Splined Motor Shaft Body

8 1 1 1 1 1 1 1 12 36 36 1 1 1 1 1 1 1 1 1 1 1 1 1

24 23 22 21 19 18

Ofrin 'PM CED 63

EFFECTIVE

PROPEL MOTOR 000223

Pr 'PUMPS AND MOTORS

SN Date

PAGE 8

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

452136 452137 452138 452139 452140 452141 452142 452143 452144 452145 452146 452147 451388 452149 452150 452151 452152 452153 452154

Bolt End Cap Bearing Dowel Pin Cam Ring Assembly Cam Ring Spring Vane Rotor Port Plate Seal Seal Snap Ring Seal Retainer Assembly Shaft Snap Ring Bearing Housing 0-Ring

4 1 1 4 1 1 40 10 1 1 1 1 1 1 1 2 1 1 1

12

13 14

15

Hein-ifprner CED 63

EFFECTIVE

PROPEL MOTOR (000245) PUMPS AND MOTORS

SN Date

PAGE 8

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

451394 451395 451722 451397 451387 451398 451399 451400 451401 451402 451414 451413 451412 451383 451410 451723 451409 451724 451406 451725 451405 451404 451403

Bolt Rear Housing Cartridge Assembly Snap Ring Snap Ring Bearing Shaft Seal 0-Ring Front Mounting Cap Seal Seal Front Port Plate Dowel Pin Vane Pin Rotor Cam Ring Rear Port Plate Assembly Rear Port Plate Bearing Lock Pin Screw

4 1 1 1 2 1 1 1 1 1 1 1 1 2 10 10 1 1 1 1 1 1 4

/yein-r4/erngI CED 63

10

5

6

5

EFFECTIVE

PUMP 000222 PUMPS AND MOTORS

SN Date

PAGE 9

ITEM 1 2 3 4 5 6 *7 *8 9 10 11 12 *13 ***14 ***15 16 17 **18

9

PART NUMBER 450506 450521 450527 450523 450303 450480 450297 450307 450501 450502 450503 450508 450300 450522 450494 450299

DESCRIPTION Bolt Plunger Cap Bolt Spring Seat Spring Seal Plate Wiper 0-Ring Plug Spring Poppet Plug 0-Ring Housing Plunger Screw Plug Relief Valve Assembly

QTY 2 1 1 2 1 2 2 4 1 1 1 2 2 1 1 2 1 1

*These parts furnished in seal kit #450306 **See separate illustration for relief valve parts ***Not furnished for field replacement

15

f

I

'"'"7010/7" mateMPF

CED 63

e,

SINGLE SPOOL CONTROL VALVE (000025) VALVES

PAGE 1

ITEM *These parts furnished in seal kit #450305 **See separate illustration for relief valve parts ***Not furnished for field replacement

16 17

1 *2 3 **4 5 6 *7 8 9 ***10 ***11 **12 13 14 15 16 17 18 19 20 21 22 23 24

PART NUMBER 450508 450300 450501 450307 450502 450503 450297 450480 450522 450299 450523 450303 450527 450521 450506 450524 450525 450486 450529 450528 450526 450494

DESCRIPTION Plug 0-Ring Plug 0-Ring Spring Poppet Wiper Seal Seal Plate Screw Plunger Housing Relief Valve Assembly Spring Seat Spring Bolt Cap Bolt Spacer Sleeve Ball Spring Pin Spacer Plug

QTY 1 1 2 7 2 2 4 4 4 2 1 1 2 1 1 2 4 1 1 2 1 1 1 1

16 15

11

immum17/Afellif CED 63

Nieeraf7P,

EFFECTIVE

2 SPOOL CONTROL VALVE (000033) VALVES

SN Date

PAGE 2

*These parts included in seal kit #450306 ITEM **See separate illustration for relief valve parts ***Not furnished for field replacement

1 *2 3 4 ***5 *6 7 ***8 9 10 **11 12 13 14 15 16

17 18 19 20 21 22

1 2

1

PART NUMBER 450501 450307 450502 450503 450297 450480 450522 450494 450299 450526 450528 450529 450486 450525 450524 450521 450523 450303 450527 450506

DESCRIPTION

QTY

Plug 0-Ring Spring Poppet Housing Wiper Seal Seal Plate Plunger.

4 11 4 4 1 6 6 3 6 1 1 1 1 1 2 1 1 3 4 2 2 6

Plug: Relief Valve Assembly Spacer Plunger End Spring Ball Sleeve Cap Spring Seat Spring Bolt Bolt

L

11

26 11

7

3 SPOOL CONTROL VALVES (000032) PAGE 3

0

DESCRIPTION

1 2 3 4 5 6.

7 8 9 10 11 12 13 14

450674 450676 450673 450799 450800 450737 450675 450672 450703 450802 450670 450671 450801 450696

Seal Spring Washer Spring Seat 0-Ring 0-Ring Seal Seal Seal Solenoid Spring Washer Valve Sub Assembly 0-Ring

QTY

2 2 2 2 1 1 1 4 5 2 2 2 1 2

'''',' ''Z,\

•\

..'

l....',-" • ..,1C ----!:.7„:1(,- ■

•'' ' i.,;-,y) 1

2

PART NUMBER

--,5, ,

s-AL)9 ,

•"11 )Yt 41 114:/ `..;•,"/

ITEM

1\ k■

I \` % _ ,.„,., i„

,,,..- \ ■ ss,.7, i

\ \2 1, r

i,,,,

\.

4`

44AV

."

,, - • , I .. v*A.'" 'i a I 6 iii 't , '',.,,,`,•.‘ ,...,„ ,.',, c . I \ tf' AVt- '7',1,i,A, ■

ALL WITH POWER BOOST EFFECTIVE

POWER BOOST SOLENOID VALVE (000087) CED 63

VALVES

SN Date

PAGE 4

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

450314 450324 450627 450315 450321 450530 450789 450307 450311 450312 450322 450531 450313 450323 450532 450790

End Cap Washer Lock Nut Adjusting Screw Spring Poppet Pilot Plug 0-Ring Backup Washer 0-Ring Spring Metering Poppet 0-Ring Backup Washer Poppet Relief Valve Body'

QTY 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1

10

14 15

16

7/Heinmakine, CED 63

EFFECTIVE

OPVTROL VALVE RELIEF CARTRIDGE (450299) VALVES

SN Date

PAGE 5

Ofrbi "NAME,

7 CED 63

RELIEF VALVE CARTRIDGE VALVES

ITEM

PART NUMBER

DESCRIPTION

1 2 3

450965 450966 450968

0-Ring 0-Ring Back-up Washer

QTY 1 1 1

EFFECTIVE SN 12-1998 Date Jan 27, 1972

../L.PAGE 6

ITEM

PART NUMBER

1 2 3 4 5

451999 452000 452001 452002 452003

DESCRIPTION

QTY

Knob

1

Lockwasher

1

Snap Ring Backup Ring 0-Ring

2

3

2 2

.........

• .......

5 .

rI ‘

.... . ....

...........

..

\

........

1.:)

:1!"1:11:41I1... I • Vs.:9 1

:::: ... ........... ...

t;;;;;

es, /1

:.' .

............ ....

mwmwm...

•

CED 63

7/HP,hP1 iePtnPls

EFFECTIVE

SELECTOR VALVE - GRESEN (000068) VALVES

SN Date

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4

452.006 452007 452008 452009

Knob Lockwasher Snap Ring 0-Ring

QTY 1 1 2 2

,.„, . ..-._.,. .. -.. . ...

.....-..-....,... . ,,/ t.-...: F .... ........... ---!...::...

• (7:,-%

■ .4

"ffPrner CFD 63

;

f, :I

:::; ............

,,,

EFFECTIVE

SELECTOR VALVE - CROSS (000068) VALVES

-*:t..

lk i:i f-451/1/,

r.•.\-.9 , ,.. ...*..•..

:\

Date

PAGE 8

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6

452032 452033 452034 452035 452036 452037

Screw Cap Spring Washer Snap Ring 0-Ring

QTY 2 1 1 1 1 2

• 4' s.-:.:--..:' ,_ _ _-** --..n.".■ ko -,;k,..-_,..--„,:-‘), --'...\.. ,,,,,,

/\ ( \

I ‘"---• ....„

I \ ■ ‘

\ 1,

/ / / ,,,

'a _ - •

I ,. I

,...,.. .,...

,

6

i,- ---', ,

I

‘ ,

ir \

k

- -I- V-- ,• 1 1 ---' •

.--.....,...'

"."...maiffEhPleen/Pr CED 63

EFFECTIVE

SELECTOR VALVE - HYD. IND. (000068) SN

VALVES

Date

PAGE 9

10 ... ............ ............ ..........

\

'1, '1,

4

-7/://einmigerner CED 63

DIPSTICK AND BUCKET CYLINDER PIPING ' HYDRAULIC CIRCUITS - UPPER

:0

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

400266 400023 400047 030166 030162 031585 400048 400044 030022 030023 400036 400255 400256 400377 400376

Clamp Lockwasher Bolt Hose Point Tube Hose Nut Clamp - Double Open Outer Tube Inner Tube Bolt Double Clamp Block Double Clamp Block Single Clamp Block Single Clamp Block

2 14 2 2 2 2 1

2 2 2 12 6 6 6 6

EFFECTIVE

SN 12-2374 Date Jan. 2, 1974

PAGE 1

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

000097 010052 010051 020417 030724 400380 400379 400318 400056 020429 030516 030723 400228 400761 020313 020315 400760

Pump 0-Ring 0-Ring Coupling Hose Lockwasher Bolt Bolt Lockwasher Coupling Hose Hose Clamp Clamp Coupling Coupling Clamp

1 2 1

1 1 4 4 8 8 2 1

1 4 2 2 1 4

14 ALL WITH TANDEM PUMP

0f/ rin migPingis

7 CED 63

HYDRAULIC PIPING RESERVOIR TO TRIPLE TANDEM PUMP HYDRAULIC CIRCUITS - UPPER

EFFECTIVE

9-1546 SN Date June 20, 1969

PAGE 2

1

)** 1

5

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

020315 020313 400761 400760 030463 030723 030462 400228 000171 000222 010106 400450 400056 400461 010105 400380 400379 400697 020579 020316 220078

Coupling Coupling Clamp Clamp Hose Hose Hose Clamp Pump Pump 0-Ring Flange Lockwasher Bolt 0-Ring Lockwasher Bolt Flange Elbow Connector Bushing

1 2 ,2 4 1 1 1 4 1 2 2 2 8 8 1 4 4 4 2 2 4

21

8'

1

11

15

18

12

13

16 17

1 19

CD

\ 20 3

‘

11

111

19

NOTE:

After Serial Number 12-2218, determine whether gear-type pumps or vane pumps are installed on your machine before ordering parts.

HYDRAULIC PIPING RESERVOIR TO INDIVIDUAL PUMPS

ALL WITH INDIVIDUAL PUMPS

10/711-1,1PRPF CED 63

HYDRAULIC CIRCUITS - UPPER

PAGE 4

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART NUMBER DESCRIPTION 020660 Reducer 020315 Coupling400761 Clamp 020313 Coupling 400760 Clamp 030723 Hose 030462 Hose 030463 Hose Capscrew 400061 400023 Lockwasher Clamp 400228 020314 Elbow 400318 Capscrew Lockwasher 400056 Flange 400751 010052 0-Ring

19

PART QTY

1 1 4 2 4 1 1 1 2 1 4 2 8 8 4 2

ITEM NUMBER DESCRIPTION

17 18 19 20 21 22 23 24 25

020742 031435 020707 400379 400380 400450 010051 000173 000172

Elbow Hose Elbow Capscrew Lockwasher Flange 0-Ring Pump Tandem Swing Pump

QTY

1 1 2 8 8 4 2 2 1

20 21

--6?

MX' "

18

22 23 z

3

22 .,

8

ALL WITH POWER BOOST HYDRAULIC PIPING RESERVOIR TO INDIVIDUAL PUMPS CED .63

HYDRAULIC CIRCUITS - UPPER

EFFECTIVE

SN 12-2040 Date March 27, 1972

PAGES

/

ITEM 1 2 3 4

PART NUMBER 020660 020315 400761 020313 400760 030723 030462 030463 400061 400023 400228 020579 400461 400056 400697 010106

5

6 8 9 10 11 12 '13 14 15 16

DESCRIPTION Reducer Coupling Clamp Coupling Clamp Hose Hose Hose Capscrew Lockwasher Clamp Elbow Capscrew Lockwasher Flange 0-Ring

QTY

ITEM 17 18 19 20 21 22 23 24 25 26 27 28

2 2 4 2 4 1 1 1 2 2 4 2 8 8 4 2

PART NUMBER 020341 031822 020316 400379 400380 400450 010051 000222 000172 121405 400682 220078

DESCRIPTION Elbow Hose Connector Capscrew Lockwasher Flange 0-Ring Pump Tandem Swing Pump Bar Clamp Bushing

QTY 1 1 2 8 8 4 2 2 1 1 2 4

3 20 21

20 21

-19

22

--I

23

7 24

25 28 15

4

27

8 6

12

7 NOTE: After Serial Number 12-2218, determine whether gear-type pumps or vane pumps are installed on your machine before ordering parts.

ALL WITH POWER BOOST HYDRAULIC PIPING EFFECTIVE RESERVOIR TO INDIVIDUAL PUMPS SN 12-2040 Date March 27, 1972 HYDRAULIC CIRCUITS - UPPER PAGE 6

I

AIM Afrth "NPP CED 63

(

-Vb

-•••

,

'

;1-

.----'

,,i A

1 1--

..,..

'

'

I

11 78 9

•.. -------__

-C k-1:t•••." .

Z —16 —17 2

8/ 9

15

12

10

(----

PART _ITEM NUMBER DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

010053 400459 400023 400022 030725 010051 400450 400380 400379 030727 030728 020132 020025 121139 121141 121138 121140

QTY

CED 63

—16 —17

1 0-Ring 2 Flange 4 Lockwasher 4 Bolt 1 Hose 2 0-Ring 4 Flange 8 Lockwasher 8 Bolt 1 Hose 1 Hose Adapter Elbow 2 1 Adapter 3 Plate 3 Pad 3 Plate 3 Pad

/MP

—14 15

--4

12 13

-----14 —15

HYDRAULIC PIPING

-

PUMP TO CONTROL VALVES

HYDRAULIC CIRCUITS - UPPER

ALL WITH TANDEM PUMP EFFECTIVE SN 9-1613 Date December 17, 1969 ///'

PAGE 7

6

14

15

PART QTY

ITEM

NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10

010053 400459 400023 400022 030450 400379 400380 400450 010051 030454

0-Ring Flange Lockwasher Bolt Hose Bolt Lockwasher Flange 0-Ring

1 2 4 4 1 8 8 4 2

11 12 13 14 15 16 17

030452 020132 020025 121139 121141 121138 121140

Hose Hose Elbow Adapter Plate Pad Plate Pad

1 1 2 1 3 3 3 3

12 13

—14 —15 ---

/Heth-lliPtilPt CED 63

HYDRAULIC PIPING

-

16 11

INDIVIDUAL PUMPS TO CONTROL VALVES

HYDRAULIC CIRCUITS

-

UPPER

ALL WITH INDIVIDUAL PUMPS EFFECTIVE

SN 9-1613 Date December 17, 1969 // Lim...m.6mm PAGE 8

4 3 2 6 7

10

14 —11

-

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

010104 400459 400023 400022 030450 400379 400380 400450 010105 030454 030452 020132 020025 121139 121141 121138 121140

0-Ring Flange Lockwasher Bolt Hose Bolt Lockwasher Flange 0-Ring Hose Hose Elbow Adapter Plate Pad Plate Pad

QTY 1 2 4 4 1 8 8 4 2 1 1 2 1 3 3 3 3

, ‘1, 1 _ ,,

-, . '.7 ...:::, p---14 15

12 —13

I

NOTE: After Serial Number 12-2218, determine whether gear-type pumps or vane pumps are installed on your machine before ordering parts.

---14 15

,

ALL WITHOUT POWER BOOST

16 17

/Hein "NPfn Er

15

—

---

CED 63

16 17

HYDRAULIC PIPING - INDIVIDUAL PUMPS TO CONTROL VALVES HYDRAULIC CIRCUITS - UPPER

EFFECTIVE SN Date

PAGE 9

, TO MANIFOLD

0

6(a)

25 ■

20 —

4

3

6\

■ r-

26

8

27 ---- 28 29

11 13

26 27

(6,

28 29

13

14

28

•4,4.•■ „, ;

*"

.

.

26 21

#thf-NP/71EP CEP 63

HYDRAULIC PIPING INDIVIDUAL PUMPS TO CONTROL VALVES' HYDRAULIC CIRCUITS - UPPER

24 23

ITEM

PART NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 18A 19 20 21 22 23 24 25 26 27 28 29 30

010051 400450 400380 400379 030452 030454 010104 400459 400023 400022 031577 031576 020132 020172 020111 020101 020003 000206 450964 020112 020150 000087 020587 000120 020640 400759 121139 121141 121138 121140 031390

DESCRIPTION 2 4 8 8

0-Ring Flange Lockwasher Capscrew Hose Hose 0-Ring Flange Lockwasher Capscrew Hose Hose Elbow Adapter Elbow Plug Plug Relief Valve w/Cartridge Cartridge Only Nipple Adapter Solenoid Valve Tee Valve Beaded Fitting Clamp Plate Pad Plate Pad Hose

ALL WITH POWER BOOST EFFECTIVE SN 12-2040 Date March 27, 1972

1 1

2 4 8 8 1 1 2 1 3 1 1 1 1 1 2 1 1 1 1 1 3 3 3 3 1

.

PAGE 10

›TO MANIFOLD

23 17

20

\\!

2 ---0101 ) 1

5\

31

18

r1 -„,

-s

,‘ i" , :

32

6 7 (ft 34 .

26 27 28

at 29 30 25 . 26

29

N

27 28

30

12 NOTE: After Serial Number 12-2218, determine whether gear-type pumps or vane pumps are installed on your machine before ordering parts.

4.4

33

25 28

AfebrilPrnEr CED 63

<

—

22 ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15A 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

010051 400450 400380 400379 030454 010104 400459 400023 400022 031576 020536 020111 020101 020003 000206 450964 020112 020150 031390 000087 020587 020388 000120 020640 400759 121139 121141 121138 121140 020761 020101 121405 400903 020172 031577

0-Ring Flange Lockwasher Capscrew Hose 0-Ring Flange Lockwasher Capscrew Hose Elbow Elbow Plug Plug Relief Valve w/Cartridge Cartridge Only Nipple Adpater Hose Solenoid Valve Tee Nipple Valve Beaded Fitting Clamp Plate Pad Plate Pad Elbow Plug Bar Clamp Adapter Hose

26

2 4 8 8 2 2 4 8 8 2 1 3 1 1 1 1 1 2 1 1 1 1 1 1 1 3 3 3 3 2 2 1 1 1 1

ALL WITH POWER BOOST

HYDRAULIC PIPING INDIVIDUAL PUMPS TO CONTROL VALVES HYDRAULIC CIRCUITS - UPPER

QTY

EFFECTIVE SN Date

PAGE 11

104 I

104

HYDRAULIC PIPING SWING VALVE TO SWING MOTOR CED 63

HYDRAULIC CIRCUITS - UPPER

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 11A 12 13 14

000025 020122 030141 020009 020101 020000 030036 030035 020013 000080 000204 450970 120279 020023 031072

1 Spool Control Valve Connector Tube Connector Plug Union Hose Hose Elbow Swing Motor Relief Valve W/Cartridges 2100 PSI Cartridge Only Bracket Plug Tube

EFFECTIVE 12-1998 Date Jan. 27, 1972

QTY 1 2 2 2 2 2 1 1 2 1 1 2 1 1 1

Am. . .

PAGE 12

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12

050025 020152 020110 020153 020154 020112 020271 030164 020200 030840 020346 020494

Filter Elbow Nipple Reducer Tee Elbow Nipple Tee Hose Tee Hose 45 ° Elbow Nipple

1 1 1 1 3 1 1 1 1 1 1 1

11 12

_

.

\\N.:•,41, I

\ N, •

HYDRAULIC PIPING SWING SYSTEM RETURN

fain-PIVIPP CED 63

HYDRAULIC CIRCUITS - UPPER

EFFECTIVE SN 9-1558 Date July 2, 1969

PAGE 13

10

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10

020009 031064 020346 020494 030840 020201 020649 020303 031150 020355

Connector Tube Elbow Nipple Hose Elbow Nipple Tee Hose Connector

QTY 1 1 1 1 1 1 1 1 1 1

7

ALL WITH POWER BOOST

akinEIP

'ILDRAULIC PIPING SWING SYSTEM RETURN

AfEin m CED 63

HYDRAULIC CIRCUITS - UPPER

EFFECTIVE

SN 12-1722 Date July 8, 1970

PAGE 14

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9

020009 031064 020346 020494 030840 020201 020649 020303 020101

Connector Tube Elbow Nipple Hose Elbow Nipple Tee Plug

QTY 1 1 1 1 1 1 1 1 1

Jr `,

ALL WITHOUT POWER BOOST

Hebriesener CED 63

HYDRAULIC PIPING SWING SYSTEM RETURN HYDRAULICS CIRCUITS - UPPER

EFFECTIVE 12-1837 Data April 7, 1971 SN

PAGE 15

18 13

15 19

..

'1...701EinmstikrnEr

CED 63

HYDRAULIC PIPING SWING CONTROL VALVE TO HEAT EXCHANGER HYDRAULIC CIRCUITS - UPPER

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

020122 031070 020533 031065 020513 400062 121142 400376 400061 020181 400759 031601 030194 020602 050044 031602 020584 050087 020101 121851 400898 400056 020646

Connector Tube Cross Tube Connector Nut Pad Clamp Bolt Tee Clamp Hose Elbow Reducer Filter (Complete) Hose Elbow Heat Exchanger Plug Filter Bracket Bolt Lockwasher Cap

QTY 1 1 1 1 2 1 1 1 1 1 4 1 2 2 1 1 1 1 2 1 2 2 1

EFFECTIVE

SN 12-2114 Date July 23, 1972

PAGE 16

■4'NlgrlYggfs CED 63

HYDRAULIC PIPING SWING CONTROL VALVE TO HEAT EXCHANGER HYDRAULIC CIRCUITS - UPPER

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

020122 031070 020533 031065 020513 400062 121142 400376 400061 020181 400759 031601 030194 020602 050044 031602 020584 050087 020101 121851 400898 400056 031066 020536

Connector Tube Cross Tube Connector Nut Pad Clamp Bolt Tee Clamp Hose Elbow Reducer Filter (Complete) Hose Elbow Heat Exchanger Plug Filter Bracket Bolt Lockwasher Tube Elbow

QTY 1 1 1 1 2 1 1 1 1 1 4 1 2 2 1 1 1 1 2 1 2 2 1 1

EFFECTIVE

SN 12-2114 Date July 23, 1972

PAGE 17

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7

020584 020512 400759 031603 020194 020602 020601

Elbow Elbow Clamp Hose Elbow Reducer Coupling

QTY

1 1 2 1 1 1 1

L

1 To Reservoir

6 5

3

OEM' /PPREP CED 63

HYDRAULIC PIPING HEAT EXCHANGER RELIEF HYDRAULIC CIRCUITS - UPPER

EFFECTIVE

SN Date

12-2114 July 23, 1972

PAGE 18

PART ITEM NUMBER DESCRIPTION 1 2 3 4 5 6 7 8 9

—{igin -aferner CED 63

000032 020204 020157 030649 030501 030499 020199 020198 030236

3 Spool Control Valve Elbow Elbow Tube Tube Tube Elbow Connector Tube

QTY 1 1 1 1 1 1 2 2 1

HYDRAULIC PIPING 3 SPOOL VALVE TO HYDRA-SWIVEL HYDRAULIC CIRCUITS - UPPER

EFFECTIVE

7

SN

Date

PAGE 19

/

*to 44F"g,

6A

12

,11$

8

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 6A 7 8 9 10 11 12 13 14 15 16 17 18 19

020122 030009 031056 020009 020101 000206 450964 020003 020288 020646 031058 020531 030645 030648 030646 030647 400256 400255 030384 030385

Connector Tube Tube Connector Plug Relief Valve W/Cartridge Relief Cartridge Only Plug Tee Cap Tube Tee Tube Tube Tube Tube Clamp Block Clamp Block Hose Hose

10

QTY 2 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 2 2 2

16 13 11 11

Iii

14

18

.,40444410, 14„*44444,010, 4.; 10

It* 19

15

18

19

hfein-ffigne, CED 63

HYDRAULIC PIPING 3 SPOOL VALVE TO BOOM LIFT CYLINDERS

ALL WITHOUT POWER BOOST EFFECTIVE

SN 12-1998 HYDRAULIC CIRCUITS - UPPER

Date Jan. 27, 1972

PAGE 20

6A 11

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 6A 7 8 9 10 11 12 13 14 15 16 17 18

020122 030009 031056 020009 020101 000206 450964 020003 020288 031058 020531 030645 030648 030646 030647 400256 400255 030384 030385

Connector Tube Tube Connector Plug Relief Valve W/Cartridge Relief Cartridge Only Plug Tee Tube Tee Tube Tube Tube Tube Clamp Block Clamp Block Hose Hose

QTY 2 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 2 2 2

15

16

17

14 18

18

'"""m"{liebPOPML/P CED 63

HYDRAULIC PIPING 3 SPOOL VALVE TO BOOM LIFT CYLINDERS HYDRAULIC CIRCUITS - UPPER

EFFECTIVE

SN 12-1998 Date Jan. 27, 1972

_j// 4 ......... ■■■ PAGE 21

—12

111, 11

).• (KW 12

I 20

13

6fJ

((

to

1.11

«owl

17

15 16

(-45

MAIO

lil

17

Ijl

20

12

18

— 10 13

6

'40. 4

—14

1

4—

7A

19

20

li

IY0

3C 2 3 B—c) 3A 3

VI* k

-

,

I

't I

Z.f.

I ' ‘P...L.^11

ITEM

PART NUMBER

1 2 3 3A 3B 3C 4 5 6 7 7a 8

020122 020751 010154 020749 020750 020744 020003 020009 020211 000206 450964 030124

DESCRIPTION Connector Fitting (Complete) 0-Ring Washer Nut Connector Plug Connector Plug Relief Valve w/Cartridge Cartridge Only Tube

QTY

ITEM

PART NUMBER

3 1 1 1 1 1 1 1 1 1 1 1

9 10 11 12 13 14 15 16 17 18 19 20

030125 030001 030002 400255 121142 120374 400048 400653 031273 400652 400036 020111

DESCRIPTION Tube Tube Tube Clamp Block Pad Bracket Nut Clamp Hose Bracket Bolt Elbow

QTY 1 1 1 4 2 1 2 2 4 1 2 8

1

ALL WITHOUT POWER BOOST

--70/101-NP/710, CED 63

HYDRAULIC PIPING 2 SPOOL AND 3 SPOOL VALVES TO BOOM HYDRAULIC CIRCUITS - UPPER

EFFECTIVE SN 12-1998 Date Jan. 27, 1972

iAmm......

PAGE 22

11 12 13

20

11

0 4.,•eq

6 15 1

20

t Id

It

11 20

12 —10

6

13 —14

19 20

GI ITEM NMEI

4

C

r .Z.,

I

0,;1'.■■■,'"

:34) •

A.4 ;F.

• ‘1•••■ &"

L.

1 2 3 3A 3B 3C 4 5 6 7

7A 8

PART NUMBER 020122 020751 010154 020749 020750 020744 020003 020009 020211 000206 450964 030124

DESCRIPTION Connector Fitting (Complete) 0-Ring Washer Nut Connector Plug Connector Plug Relief Valve w/Cartridge Cartridge Only Tube

QTY

ITEM

PART NUMBER

3 1 1 1 1 1 1 1 1 1 1 1

9 10 11 12 13 14 15 16 17 18 19 20

030125 030001 030002 400255 121142 120374 400048 400653 031273 400652 400036 020111

DESCRIPTION Tube Tube Tube Clamp Block Pad Bracket Nut Clamp Hose Bracket Bolt Elbow

QTY 1 1 '1 4 2 1 2 2 4 1 2 8 l

HYDRAULIC PIPING 2 SPOOL AND 3 SPOOL VALVES TO BOOM

EFFECTIVE SN 12-1998

CED 63

HYDRAULIC CIRCUITS - UPPER

Date

Jan. 27, 1972

A.=.1 PAGE 23

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10

000033 020157 030234 030498 020198 020199 030840 030500 030233 020138

2 Spool Control Valve Elbow Tube Tube Connector Elbow Hose Tube Tube Elbow

QTY 1 2 1 1

2 2 1 1 1 1

,

7

' e ,

,

cz9 10

)

9 .........

1

/HEM "NP/Wer CED 63

HYDRAULIC PIPING 2 SPOOL VALVE TO HYDRA-SWIVEL

EFFECTIVE

SN

HYDRAULIC CIRCUITS - UPPER

12-1722 Date July 8, 1970

PAGE 24

ITEM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PART NUMBER 020023 020534 020536 031068 031071 400255 400062 400061 400759 031155 020513 400236 400023 020578 020101 020325 020182

DESCRIPTION Plug Tee Elbow Tube Tube Clamp Lockwasher Bolt Clamp Hose

ConneCtor Bolt Lockwasher Manifold Plug Reducer Nipple

30

QTY

ITEM

PART NUMBER

DESCRIPTION

1 1 2 1 1 2

18 19 20 21 22 23 24 25 26 27 28 29 30 31

000153 031156 031063 020531 031062 031069 020159 031154 031248 030194 050044 020264 020602 020608

Valve Hose Tube Tee Tube Tube Connector Hose Hose Elbow Filter Plug Reducer Connector

1 1 12 1 5 2 2 1 1 1 1

QTY 1

2 1 1 1 1 1 2 1 3 3 1 3 1

30

9 11

10 9

/ffEth migPifinEr CED 63

HYDRAULIC PIPING 2 SPOOL AND 3 SPOOL VALVES TO FILTERS HYDRAULIC CIRCUITS - UPPER

11

EFFECTIVE SN 12-2114 Date July 23 , 1972

7 /75

rci, .''-:::::: ------------ (j;.>71, '//? 11 _ rr „--------...

--

/

/ / --/

--/

111 1II

10

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10

020150 020111 031151 000086 020009 031141 031152 020388 020154 020175

Adapter Elbow Hose Valve Connector Tube Hose Nipple Elbow Tee

2 1 1 2 1 1 1 3 1 1

) 1 /,', // (-.;--'‘Y

NP Pr OEM "rn

'1"I / CED 637

HYDRAULIC PIPING SOLENOID VALVE TO BOOM AND DIPSTICK HYDRAULIC CIRCUITS - UPPER

EFFECTIVE

SN 12-2235 Date March 26, 1973

PAGE 26

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9

020328 000061 020156 020249 020191 030732 020158 030251 030252

Elbow Lockout Valve Nipple Elbow Elbow Hose Elbow Tube Tube

QTY 4 2 2 2 2 4 4 2 2

411asmommexasswarr

CARRIER MODELS ONLY

Ofrth "11/PPBP,

'17 CED 63

HYDRAULIC PIPING - OUTRIGGER CYLINDERS HYDRAULIC CIRCUITS - UPPER

EFFECTIVE SN Date

PAGE 27

All 37 ° flare connections are fitted with copper seal gaskets. The following sizes are available:

Tube Size (O.D.)

Part Number

5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1 1/4"

010071 010072 010073 010074 010069 010075 010070 010076

TUBE SEALS CED 63

HYDRAULIC CIRCUITS - UPPER

EFFECTIVE

SN Date

PACE 28

/hfeb1oemer

HYDRAULIC RESERVOIR

7 ......

CED 63

RESERVOIR & FILTERS

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14

020101 050015 050085 400391 020426 050124 050047 240067 050046 020105 050013 020606 400620 050068

Plug Gasket Cover Bolt Reducer Reservoir Cover Breather Magnet Assembly Plug Pad Plug Webbing Mounting Strap

2 2 1 16 1 1 1 1 1 1 2 1 3 3

EFFECTIVE SN 12-2031 Date Mar. 10, 1972

47:77

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4

050075 450812 050063 050076

Head 0-Ring Element Housing

CED 63

RESERVOIR & FILTERS

1 1 1 1

EFFECTIVE

HYDRAULIC FILTER (050044)

---//ifein-ffprner

QTY

SN Date

12-2031 Mar. 10, 19 72

PAGE 2

13

ENGINE FLYWHEEL

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

400055 400056 400212 240044 400175 400022 400023 240043 450253 240045 400178 400192 400176 220022 210063 400109

Nut Washer Stud Pump Adapter Grease Fitting Bolt Washer Clutch Housing Gasket Cover Plate Screw Bolt Snap Ring Bearing Shaft Bolt

4 8 4 1 1 12 12 1 1 1 2 4 1 1 1 6

ALL WITH GM 4-53

--///einlffpniet CED 63

EFFECTIVE

TANDEM PUMP DRIVE (WITHOUT CLUTCH) SN

PUMP DRIVE & CLUTCH

Date

J/(7771

34 ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9

450220 220023 450221 450222 450223 450224 450225 450226 450227

Drive Ring Pilot Bearing Hub Nut Lockwasher-Hub Nut Hub and Back Plate Spring-Release Drive Plate Floating Plate Sliding Sleeve

QTY

14 1 1 1 1 1 6

Li 0 EF

1 1 1

'

,-18 z

19 / /31/0200 2, 4,/tivo e,

(Index No.. 9 consists of the following) A B C D E

450228 '450229 450230 450231 450232

Cotter Pin Link, Lever Pin Sliding Sleeve Split Collar Assembly

y 13 2 12 /15 11 ,( 16

,

'I b

22

0

8 8 8

/17

23 25

1 1

(Index E consists of the following) a b c d 10

A B C D E F 11 12 13 14

450233 450234 450235 450236 450237

Hex Nut Washer Split Collar Cap Screw Adjusting Yoke Assembly

2 4 1 2 1

(Index No. 10 consists of the following) 4 Cotter Pin 450238 4 Lever, Finger 450239 4 Pin 450240 1 Lock Pin 450241 1 Spring 450242 1 Adjusting Yoke 450243 1 Grease Fitting 450244 1 Jam Nut 450245 1 Washer 450246 1 Hose Assembly-12 inch 450247

(Index No. 14 consists of the following) 1 90 0 Fitting 450248 A 1 Hose-12 inch 450249 B 1 Straight Fitting 450250 C

OEM"NP/WEP CED 63

For Complete Clutch Assembly Which Includes Item Numbers 1, 3-17, 23-31, 33 & 34, Use Part Number 230018 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

450251 450252 450253 450254 210060 220022 400177 400176 450255 450256 450257 450258 450260 450259 400192

Screw Cover Plate Cover Plate Gasket Key-Hub Clutch Shaft Bearing Snap Ring Snap Ring Cap Screw Lockwasher Throwout Yoke Hand Lever Cap Screw Woodruff Key Bolt

ALL WITH GM 4-53

1 1 1 1 1 2 2 2 2 1 1 1 2 4

30 31 32 33 34 35 36 37 38 39 40

400056 450261 240043 450262 450263 240044 400212 400055 400175 400022 400023

8 1 1

2 1 1

4 4 1 12 20

EFFECTIVE

TANDEM PUMP DRIVE (WITH CLUTCH) PUMP DRIVE E CLUTCH

Lockwasher Operating Shaft Clutch Housing Oil Cap Grease Fitting Pump Adapter Pump Mounting Stud Jam Nut Grease Fitting Bolt Lockwasher

SN Date

/ PAGE 2

ITEM 1 2 3 4 5 6 7 8 9

PART NUMBER

DESCRIPTION

450220 220043 220023 450570 450222 450223 450224 450225 450226 450227

Drive Ring Pilot Bearing (Cummins) Pilot Bearing (GMC) Hub Nut Lockwasher-Hub Nut Hub and Back Plate Spring - Release Drive Plate - HD Floating Plate Sliding Sleeve

(Index No. 9 consists of the following) 450228 Cotter Pin 450229 Link Lever Pin 450230 Sliding Sleeve 450231 Split Collar Assembly 450232

A B C

D E

QTY

1 1 1 1 1

NOTE: For complete Clutch Assembly which includes Item Numbers 1, 3-17, & 26, use Part Number 230150.

Complete Gear Reducer includes all other parts except Item Numbers 2, & 44-46. For Cummins Engine, use Part Number 240091. For GMC Engine use Part Number 240083.

1 6 1 1 1 8 8 8 1 1

10

(Index E consists of the following) 450233 450234 450235 450236

a b

d

450237

10

Hex Nut basher Split Collar Cap Screw Adjusting Yoke Assembly

2 4 1 2 1

(Index No. 10 consists of the following) A B

450238 450239 450240 450241 450242 450243 450244 450245 450246 450247

C D E

F 11 12 13 14

Cotter Pin Lever, Finger Pin Lock Pin Spring Adjusting Yoke Grease Fitting Jam Nut Washer Hose Assembly - 12 Inch

4 4 4 1 1 1 1 1 1 1

(Index No. 14 consists of the following) A B C

450248 450249 450250

90 ° Fitting Hose - 12 Inch Straight Fitting

1 1 1

ALL WITH INDIVIDUAL PUMPS

"'/#0/11, 41/PAMEPP CED 63

CLUTCH PUMP DRIVE & CLUTCH

EFFECTIVE

SN 12-2040 Date March 27, 1972

PAGE 3

ITEM 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

PART NUMBER

DESCRIPTION

450255 450256 450574 450254 450576 450577 451337 450251 450579 450259 450260 450575 450580 450581 450582 450583 450584 451338 451339 450587 450588 450589 450590 451340 451341 451342 450597 451343 451344 450598 400212 400056 400055 400023 400022

Cap Screw Lockwasher Fork, Throwout Key Drive Shaft, Clutch Screw, Hex Head Star Washer Screw, Stdve Head Plate, Inspection Key, Woodruff No. 15 Cap Screw Handle Shaft, Clutch Clutch Housing (Cummins) Clutch Housing (GMC) Oil Seal 0-Ring, Pump Adapter Bearing Pinion Plug, Oil Level Check Housing, Triple Pump Reducing Bushing Breather Gear Stud Nut Sleeve, Adapter "C" 0-Ring Adapter Drain Plug Pump Mounting Stud Washer Nut Lockwasher Bolt

QTY 2 2 1 1 1 7 19 2 1 2 1 1 1 1 1 1 4 8 1 4 1 1 1 3 12 12 1 3 3 1 12 12 12 12 12

NOTE: For Complete Clutch Assembly which includes Item Numbers 1, 3-17, & 26, use Part Number 230150.

Complete Gear Reducer includes all other parts except Item Numbers 2, E, 44-46. For Cummins Engine, use Part Number 240091. For GMC Engine use Part Number 240083.

222322 )8 19

24.2 '26

0

''30 2.1-27 34 35 "I• 32 33

21

31 31

38 21 39

28 ,/,''-)40 29 47 48

C) Z4

40

31 33

M 45 46 43 ./- ,/31 / 31 31

37

31

30

PUMP DRIVE

10/11-1,PMEP PUMP DRIVE & CLUTCH

0% 4* 42

, Oft 30 / 7 42 41

40

CED 63

31 --30

42 41

41 40 ALL WITH INDIVIDUAL PUMPS EFFECTIVE SN 12-2040 Date March 27, 1972

// mmimmwmmla PAGE 4

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13

12

PART NUMBER

DESCRIPTION

121055 121209 121210 400017 120384 400386 400399 400896 400013 121049 400236 400379 120987 400257

Mounting Frame Shim (18 Ga.) Shim (14 Ga.) Nut Tie Bar Bolt Bolt Stud Nut Heat Exchanger Mount Bolt Bolt Front Engine Mount Bolt

QTY 1 As Req'd As Req'd 8 1 2 4 2 4 1 4 2 1 4

ALL WITH GM 4-53

igginer

ENGINE MOUNTING FRAME

N

CED 63

ENGINE RELATED SYSTEMS

EFFECTIVE SN 12-1676 Date April 16, 1970

PAGE 1

3

. 0

.°, 0,

. .°

00

p

9

9

,

2

°'

::

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9

300191 450787 300190 450702 450775 450607 030288 020242 450705

Muffler Element (Donaldson) Raincap Radiator Hose Fan Hose Drain Cock Dipstick

QTY 1 1 1 1 1 1 1 1 1

ALL WITH GM 4-53

7(//Eili "NP/Wer CED 63

ENGINE PARTS ENGINE RELATED SYSTEMS

EFFECTIVE

SN 12-1849 Date April 28, 1971

/1".mm.. .1

PAGE 2

10 8

1

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

300265 30026 3 300267 400048 400023 400405 121624 300273 300268 300266.

300271 300270 300272 300269 300264

Air Cleaner Element Air Cleaner Mounting Bands Nut Lockwasher Bolt Plate Clamp Elbow Air Cleaner Hood Air Inlet Tube Reducer Clamp Adapter Gasket

1 1 2 4 12 4 4 4 1 1 1 1 1 1 1

11

8

12

13 14 15 ALL WITH GM 4-53

1

'1'1'74,th "ffPrn Pr

CED 63

AIR CLEANER ENGINE RELATED SYSTEMS

EFFECTIVE

SN 12-1976 Date January 3, 1972

PAGE 3

18

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

400017 400059 330047 400048 400023 400405 331182 400021 400158 400159 400542 330233 450804 450803 330429 330234 400354 400374 400157 330206

Nut Washer Spring Nut Washer Bolt Handle Bolt Nut Washer Bolt Throttle Cable Choke Cable Air Shut-off Cable Bracket Bracket Bolt Adapter Bolt Rod End

QTY 1 1 1 4 5 4 1 1 2 6 1 1 1 1 1 1 1 1 1 1

ALL WITH GM 4-53

12

11

■

"'"1"1740/4 7 "ffeIgner CED 63 .

ENGINE CONTROLS ENGINE RELATED SYSTEMS

10 EFFECTIVE

SN 9-1541 Date. June 16, 1969

PAGE 4

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10

450552 400547 020601 400619 050024 120791 400490 120794 400405 400062

Cap Pipe Extension Coupling Webbing Strip Fuel Tank End Frame Nut Side Brace Bolt Locknut

QTY 1 1 1 2 1 2 2 1 4 4

7

hrein-fferner CED 63

'

FUEL TANK AND MOUNTING FRAME ENGINE RELATED SYSTEMS

EFFECTIVE SN 12-2000 Date Feb. 25, 1972

PAGE 5

5 TO FUEL TANK FUEL RETURN LINE

TO FUEL TANK FUEL SUPPLY LINE ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5

020174 020139 020138 030147 020140

Reducer Elbow Street Elbow Hose Restrictor Elbow

QTY 2 3 1 2 1

ALL WITH GM 4-53 Immmm

".."74Yebi"tePrnE,

CED 63

EFFECTIVE

FUEL CIRCUIT ENGINE RELATED SYSTEMS

SN Date

/L11...

PAGE 6

12

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12

020746 031609 020344 050129 400397 400023 400138 401152 400062 401147 400061 401151

Elbow Hose Elbow Mounting Plate Bolt Lockwasher Flat Washer Short Spacer Nut Bolt Bolt Long Spacer

QTY 2 2 2 1 3 6 4 4 3 1 2 3

ALL WITH GM 4-53 OIL FILTER INSTALLATION CED 63

ENGINE RELATED SYSTEMS

EFFECTIVE SN 12-2151 Date Sept. 15, 1972

PAGE 7

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14

PART NUMBER

DESCRIPTION

120246 450631 120127 120126 120125 120034 121253 120281 121667 121666 121664 121668 121665 452038 452040 452039

Door Latch W/Keys Tumbler Only W/Keys Mounting Pad-Rear Mounting Pad-Side Mounting Pad-Front Cab Floor Seat W/Pedestal Cab Lower front window cover Upper front window cover L.H. Window cover Rear window cover Door window cover Retainer Retainer (threaded) Spring

QTY 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1

Note: For machines not originally equipped with window covers, order kit #121663 which includes mounting clips.

NEM "NPin PP CED 63

OPERATORS CAB & WINDOW COVERS CAB & SHEET METAL

EFFECTIVE SN 12-1944 Date November 11,1971 -

PAGE 1

13

12

1I'r

1/ / I/ /

II

I

0

$

11

/

1/ /

9

/

1/ 1

1/ r 1

1/ 1 1 /1 /1 1/ 1/ / 1

10

/

1/ /

/ 1/

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

122062 122063 122065 122064 122066 122067 122068 122069 122070 122071 122072 122073 122074 121878 121883 121895 121896 400484 400159 400158 451584 451585

Panel Panel Panel Panel Panel Panel Panel Panel Panel Panel Panel Panel Panel Upper Front Seal Lower Front Seal Lower Rear Seal Upper Rear Seal Bolt Lockwasher Nut M.K.E. Solvent Glue

QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 10 10 1 Qt. 1 Gal.

/

6

%o:

18

NOTE: For Complete Sound Proof Field Package, Use Part Number 451587 400•0 '

15

19 j 20

00/1/ "1,PM Er CED 63

EFFECTIVE

SOUND PROOFING - CAB CAB & SHEET METAL

SN Date

/ PAGE 3

11

12

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PART NUMBER

DESCRIPTION

120734 120635 120628 450617 120283 120235 120236 120733 120237 120240 120634 120735 120707 451906 451907 451908

1 Top L.H. Front Section 1 L.H. Side Panel 4 Door - Screened 10 Latch 1 Rear L.H. Corner Post 1 L.H. Center Post 1 R.H. Center Post 1 Top Rear Section 1 R.H. Rear Corner Post 1 Door - Screened 1 R.H. Side Panel 1 Top R.H. Front Section 1 Top Access Door Hinge ( 1 1/2" Male) As Req'd Hinge ( 1 3/4" Male) As Req'd )7s Rectid Hinge ( Female)

/vein- erne, CED 63

QTY

MACHINERY HOUSING CAB , SHEET METAL

SN 9-1552 D ate June 26, 1969 Date

1/4777771

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

240065 400282 400193 400055 400056 400212 400538 400698 400756 400422 400098 400642 240073 400187 240041 200014 240066 400183 400182 400643

Gear Box Grease Fitting 0-Ring Jam Nut Lockwasher Stud Clamp Bolt Washer Lock Nut 3/4 Washer 3/4 Stud Wedge Bolt Cap Swing Pinion Spacer Cotter Pin Nut Stud 3/4

QTY 1 2 1 4 4 4 1 4 4 4 4 2 4 2 1 1 1 2 2 2

—16

13

15 14

Afein-ffisrner CED 63

SWING GEAR BOX AND PINION SWING SYSTEM

EFFECTIVE

SN 9 1621 Date January 8, 1970

PAGE 1

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PART NUMBER 400038 400023 400015 450471 450646 400307 450692 450466 450467 450468 400022 450665 450648 450649 450650 400461 400056 450744 450477 450476• 450661

DESCRIPTION Bolt Lockwasher Grease Fitting Output Shaft Cover Gasket Bolt End Plate Shim (.005") Shim (.007") Shim (.020") Bolt Intermediate Shaft Cover Shim (.005") Shim (.007") Shim (.020") Bolt Lockwasher Dowel Pin Bearing Cone Bearing Cup Cover

QTY ITEM 18 10 19 14 20 2 21 1 22 1 23 2 24 1 25 2 26 2 27 1 28 4 29 1 30 2 31 2 1 32 33 17 34 22 35 2 36 1 37 1 38 1

PART NUMBER 450645 450735 450664 450736 450652 220035 450473 450745 450464 450461 450475 450474 450746 450651 450465 450478 450479 450462 020105 450743 450795

DESCRIPTION Gasket Bearing Input Shaft Bearing Oil Seal Bearing Cup Bearing Cone Grease Retainer Intermediate Gear Intermediate Shaft Bearing Cone Bearing Cup Grease Retainer Snap Ring Output Gear Bearing Cup Bearing Cone Output Shaft Plug Breather Plug

QTY ITEM 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1

39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

PART NUMBER 450660 450791 450640 450642 450643 450653 450691 450747 450662 450794 450647 450469 450470 450463 450460 450793 020138 450796 450797 450924

DESCRIPTION Housing Gasket Brake Assembly Brake lining Brake Actuator Boot Yoke Clevis Pin Brake Housing Bolt Gasket Oil Seal 0-Ring Sleeve Bearing Cap Plug Elbow Dipstick Tube Dipstick Spring

QTY 1 1 1 2 1 1 1 1 1 5 1 1 1 1 1 1 1 1 1 2

SWING GEAR BOX (240065)

7/iffrin "iePrn Pr CED 63

SWING SYSTEM

PAGE 2

11

111111111 1111111111111 111 01 1111

1 1 1

2

ITEM 1 2 3 4 5 6 7 8 9 10 11

9 8 rr

1A-:51 A, -. ,'-- -

- - - "

„ ss

.'•'.',,,,

PART NUMBER

DESCRIPTION

QTY

400872 400422 220104 400871 130087 400874 400737 400382 400314 400859 250020 250019 250018 250024

Bolt (3 3/4" Long) Nut Swing Bearing Bolt (5" Long) Turntable Casting Dowel Pin Bolt Washer Bolt Dowel Stud As Shim #31 Ga. As Shim #22 Ga. Shim #16 Ga. As As Shim .005"

4 40 1 28 1 2 36 4 4 4 Req'd Req'd Req'd Req'd

4

i /

s%

'''''' I

$

...'• ..... I

„,,

.. .. •

1 ..... - ..........-------

,---

il

•

1

11 1 A 11

I

rr

‘s-5,

/Hein CED 63

EFFECTIVE

SWING BEARING AND TURNTABLE " SWING SYSTEM

SN Date

10-1702 May 20, 1970

PAGE 3

SWING GEAR BOX BRAKE SHAFT

10

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10

230087 400050 400051 400137 230091 230179 400024 400026 230174 400121

Mounting Bracket Nut Lockwasher Bolt Lever Assembly Cable. Assembly Clevis Pin Cotter Pin Adapter Jam Nut

QTY 1 4 4 4 1 1 1 1 1 1 C-12HD f T-12HD ONLY

mu

CED 63

/AWN ilikinEr

SWING BRAKE SYSTEM SWING SYSTEM

PAGE 4

0-

-4

iv050VW1'.'

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7

120607 400023 400022 310001 310016 310019 310025

Cover W/Pads Lockwasher Bolt Battery Primary Cable Ground Cable Cover

QTY 1 2 2 1 1 1 2

3

**•-. .....

"• CED 63

Ofrin "1/Prn Pr

BATTERY INSTALLATION ELECTRICAL SYSTEM

EFFECTIVE SN 12-1757 Date October 9, 1970

1/17:71

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

320334 320077 320049 320041 320294 320295 320296 320058 320375 320374 401154 121897 320047 320043 320372 320045 320018 401167 320050 400745 450953 320373 320371 320015

Switch Toggle Switch Oil Temperature Warning Light Ammeter Oil Pressure Gauge Water Temperature Gauge Fuel Gauge Panel Wiring Harness - Cab Main Wiring Harness Clamp Plug Mounting Plate Fuel Level Sender Oil Pressure Sender Engine Wiring Harness Water Temperature Sender Pressure Switch Clamp Reservoir Temperature Sender Vibration Dampener Tachometer Speed Boost Handle Harness Speed Boost Harness Speed Boost Control Button

QTY 1 1 1 1 1 1 1 1 1 1 8 1 1 1 1 1 1 2 1 4 1 1 1 2

ALL WITH GM 4-53 EFFECTIVE

ENGINE GAUGES AND WIRING CED 63

ELECTRICAL SYSTEM

SN Date

12-2167 Nov. 2, 1972

PAGE 2

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

320434 320077 320049 320041 320294 320295 320296 400745 320015 320058 320451 320424 401154 320047 320050 401167 320045 320018 320043 450953

Switch Toggle Switch Oil Temperature Warning Light Ammeter Oil Pressure Gauge Water Temperature Gauge Fuel Gauge Vibration Dampener Push Button Panel Speed Boost Harness Wiring Harness Clamp Fuel Level Sender Reservoir Temperature Sender Clamp Water Temperature Sender Pressure Switch Oil Pressure Sender Tachometer

QTY 1 1 1 1 1 1 1 4 3 1 1 1 8 1 1 2 1 1 1 1

ALL WITH GM 4-53

NEM ',erne" CED 63

ENGINE GAUGES AND WIRING ELECTRICAL SYSTEM

EFFECTIVE SN 12-2473 Date May 10, 1974

PAGE 2

To Reservoir Oil Temperature Sender

To To Starter Relay \ Starter Solenoid To Oil Pressure Sender

0 0 P

ff

#14 Violet ,

12 White-..„.

\ Circuit V Breaker

To Power Boost Solenoid

14 Brown

# 14 Green

0

Water Temperature Gauge

# 14 Pink

# 8 Black

Oil Pressure Gauge

#14 Black

To Pressure Switch #14 Yellow

1J

#8 Red

r

To Voltage ROgulator To Water Temperature Sender

#14 Orange

/A

To Heater To Fuel Level Sender

# 14 Pink

1

# 14 Orange

To Defroster

Reservoir Oil Temperature Warning Light

#12 Brown

To Power Boost Handles

era0+

0

Toggle Switch

Ignition Switch

Starter Button

WIRING HARNESS INSTALLATION (320424) OlehPlirelinEr CED 63

ELECTRICAL SYSTEM

EFFECTIVE SN Date

PAGE 3

0

Fuel Water

Pressure Switch Fuel Sender White #14 Oil Pressure Sender

White #14 Yellow #14 Blue #14 Green #14 Yellow #12

Yellow #14

Water Temp.

Sender

Green #14

Oil

Brown #12 Black #14

Amp. Oil Temp.

Light Toggle Switch

Starter Button

Brown #14

Black #12

Blue #14

Brown #12 Power Boost

Starter Yellow #12

Brown #14 \\I Red #14

White #12

Starter Solenoid

Oil Temp. Sender

All w/GM 4-53

74/7/0"tePtner CED 63

Wiring Schematic (320057 Harness) ELECTRICAL SYSTEM

EFFECTIVE SN 9-1425 Date March 18, 1969

/1"..m"......

PAGE 3

ITEM 1 2 3 4 5

34 18 38

23

35

25 19

21 15 24 1 19

e%'®\ \ 22 2'04/

28 / 22 \ /

26

8

M

AW

„wy il 16 /4

17 31 \15 33 -13

-11

5 /

,28

'20

/ 11 / 27

16

-t---6

"-brwc /14 bVQ) / T 144'4-2 31 14 13 33—f t

29

19

21

19

/ 22 20 /

A C r\20 9 24 1 5 19

28

\9

21

31

12

10 NOTE: For Complete Control Base Assembly Which Includes Item Numbers 1-14, Use Part Number 330500

#EinleornEr CED 63

MAIN CONTROL ASSEMBLY CONTROLS

6

39

22

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

PART NUMBER

DESCRIPTION

330011 220101 330491 400848 330499 220102 330498 220102 330490 330010 400383 210032 400005 330494 220100 220108 400106 400023 400048 330667 400027 400024 400122 400121 330668 330669 330077 330140 330139 400286 400287 330495 330521 330523 400851 400055 400886 400955 400159 400432 401212 400207

Lever 1 Bearing 2 Lever 1 Set Screw Dipstick Control Assembly 1 Bearing 2 1 Bucket Control Assembly 2 Bearing 1 Boom Control Assembly 1 Lever 2 Pin 1 Shaft 5 Grease Fitting 1 Base 2 Bearing Bushing 4 Bolt 8 8 Lockwasher Nut 8 Handle 1 Cotter Pin 8 Pin 4 Yoke 4 Nut 8 Handle 1 Adjusting tube 2 Rod 1 Rod 1 Rod 2 Yoke 3 Pin 3 Pedal Assembly 2 Shim As Req'd Hold Down 4 Bolt 4 Jam Nut 4 Cap 2 Screw 4 4 Lockwasher 4 Nut 1 Offset Clevis 1 Pin

QTY

EFFECTIVE SN 12-1873 Date April 9, 1971

PAGE 1

ITEM 1 2 3 4 5

38

23

6

22 25 /

19 28 / 22 \3/4

26

29 28

19

21

->6%2® X20 1921 22 / 20 /

9 24 ‘15

19

12

\20

/ 22 / 19 28

21

10 NOTE: For Complete Control Base Assembly Which Includes Item Numbers 1-14, Use Part Number 330500

MAIN CONTROL ASSEMBLY

hfeinmigpine, CED 63

CONTROLS

39

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

PART NUMBER

DESCRIPTION

330011 220101 330491 400848 330499 220102 330498 220102 330490 330010 400383 210032 400005 330494 220100 220108 400106 400023 400048 330667 400027 400024 400122 400121 330668 330669 330077 330140 330139 400286 400287 330495 330521 330523 400851 400055 320015 400955 400159 400432 401212 400207

Lever 1 Bearing 2 Lever 1 4 Set Screw 1 Dipstick Control Assembly Bearing 2 Bucket Control Assembly 1 Bearing 2 1 Boom Control Assembly Lever 1 2 Pin 1 Shaft 5 Grease Fitting 1 Base 2 Bearing Bushing 4 Bolt 8 Lockwasher 8 Nut 8 Handle 1 Cotter Pin 8 Pin 4 Yoke 4 Nut 8 Handle 1 Adjusting tube 2 Rod 1 Rod 1 Rod 2 Yoke 3 Pin 3 Pedal Assembly 2 Shim As Req'd Hold Down 4 Bolt 4 Jam Nut 4 Push Button 2 Screw 4 Lockwasher 4 Nut 4 Offset Clevig 1 Pin 1

ALL WITH POWER BOOST

EFFECTIVE SN 12-1873 Date April 9, 1971

QTY

PAGE 2

ITEM 1

12

C

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

PART NUMBER

DESCRIPTION

330504 330503 400005 220108 400006 330028 330024 220103 400106 400023 400048 120039 400122 400121 400024 400027 330080 400287

Lever & Bracket Assembly Lever Grease Fitting Bushing Set Screw Base Shaft Bearing Bolt Lockwasher Nut Grip Yoke Nut Pin Cotter Pin Control Rod Pin

QTY

ITEM

PART NUMBER

DESCRIPTION

1 2 6 2 2 1 1 4 8 8 8

19 20 21 22 23 24 25 26 27

400286 400383 330064 330142 330505 210053 330506 330141 220100

Yoke Taper Pin Lever Control Rod Bracket Shaft Lever & Bracket Assembly Control Rod Bearing

QTY 2 2 2 1

1 1

1 1

2

2

4 6 4 6 1

19

19

9

10 r

11 CONTROLS - PROPEL OR OUTRIGGER

211....."7/HeinmiePPI7Er CED 63

CONTROLS

EFFECTIVE

SN 12-1639 Date February 16, 1970

PAGE 3

12 14 11 11

13

15 10 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

PART NUMBER

DESCRIPTION

400018 210022 140001 140014 400461 400056 400055 400015 140024 040228 140041 210085 400062 400332 210029 140011 140038 400027 210025 210023

Lock Pin Pin Foot Toe Plate Bolt Lockwasher Nut Grease Fitting Arm Outrigger Cylinder Collar Pin Locknut Bolt Pin Frame-Commercial Mount Frame-H.W. Carrier Cotter Pin Pin Pin

QTY 8 2 2 2 8 8 8 4 2 2 8 4 8 8 2 1 1 8 2 2

11

19

9 8

0

7 6

CARRIER MODELS ONLY

'74E/A "NP/WEr

OUTRIGGER ASSEMBLY

m1

CED 63

OPTIONS

PAGE 1

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

400101 031408 400223 400483 400431 121535 400222 100007 400218 400627 121533 320320 121534 121531 121530

Clamp Hose Washer Lockwasher Nut Brace Bolt Spacer Bolt Nut Support Heater Adapter Gasket Strip Gasket Strip

2 1 9 5 3 1 1 3 1 1 1 1 1 2 2

For complete heater package order part number 991153.

12

EFFECTIVE

HEATER ASSEMBLY ...m

70/0/1/4 OPPAter

CED 63

OPTIONS

SN Date

PAGE 2

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5

320338 320354 400483 400627 400222

Fan Bracket Lockwasher Nut Bolt

1 1 2 2 2

For complete defroster package order part number 991154.

DEFROSTER FAN

SN

70/0/1/ NNEME, CED 63

OPTIONS

Date

EFFECTIVE

1477

3 3 3 3 3 3

1

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11

450686 040105 010036 040104 040107 400005 400192 400326 400192 400318 120284

Hydra-Swivel Assembly Hydra-Swivel Body 0-Ring Hydra-Swivel Housing End Plate Grease Fitting Bolt Bolt Bolt Bolt Mounting Plate

QTY 1 1 6 1 1 1 3 6 2 6 1

4

5 6

4Pien CED 63

ALL EXCEPT CARRIER MODELS WITH REMOTE CONTROL

7 HYDRA-SWIVEL AND MOUNTING UNDERCARRIAGE

EFFECTIVE SN Date

PAGE 1

11

z

10

7

__-J1k4. 0

toa

8

ttifts

te4

,f4

12

r

9A .41110

•

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 9a 10 11 12 13 14 15

450686 020207 030244 030245 030241 020009 400218 400626 000205 450964 020101 020199 030749 020517 030839 020174

Hydra-Swivel Assembly Elbow Lower Tube Upper Tube Hose Connector Bolt Lockwasher Relief Valve Cartridge (only) Plug Elbow Hose 45 ° Elbow Hose Reducer

Aleth-fferner CED 63

--

•(

c„). (a

■

OTY

13

1 4 2 2 4 8 4 4 2 4 4 4 4 2 2 2

N

• •• N

Y.

14

• 15

EFFECTIVE

HYDRAULIC PIPING - LOWER PROPEL UNDERCARRIAGE

SN Date

PAGE 2

ITEM 1 2 3 4 5 6 7 8 9 10 11 12

21

16

V

20

15‹ rr

17 - -0 18 19

13

14

15 16 17 18 19 20 21 22 23 24 25

12

"'au CED 63

7/HEM"NPFBEr

HYDRAULIC PIPING - LOWER PROPEL UNDERCARRIAGE

PART NUMBER

DESCRIPTION

QTY

400212 400322 010109 000245 400056 400055 010054 400697 400056 400461 020471 031945 031946 031949 031950 031943 031944 031947 031948 031679 031680 031688 031689 400686 401195 801425 400023 400048 401154 400405 801745 400853 400328 020101

Stud Washer 0-Ring Propel Motor Lockwasher Nut 0-Ring Flange Lockwasher Bolt Connector Propel Tube L.H. Propel Tube R.H. Propel Tube L.H. Propel Tube R.H. Propel Tube L.H. Propel Tube R.H. Propel Tube L.H. Propel Tube R.H. Propel Tube L.H. Propel Tube R.H. Propel Tube L.H. Propel Tube R.H. Tube Clamp Bolt Bevel Washer Lockwasher Nut Tube Clamp Bolt Motor Guard Bolt Lockwasher Plug

8 8 2 2 12 4 4 8 16 16 (12'8" (12'8" (11'8" (11'8" (12'8" (12'8" (11'8" (11'8" (12'8" (12'8" (11'8" (11'8"

Tracks) Tracks) Tracks) Tracks) Tracks) Tracks) Tracks) Tracks) Tracks) Tracks) Tracks) Tracks)

1 1 1 1 1 1 1 1 1 1 1 1 1 8 8 8 14 8 6 6 2 6 6 4

EFFECTIVE

SN 12-2346 Date September 26, 1973

PA PAGE 3

14

PART NUMBER

DESCRIPTION

4 5 6 7 8 9 10 11 12

122135 000068 020194 020281 000137 020782 031785 020783 031787 020785 020101 020784

Bracket Diversion Valve Reducer Connector Valve Adapter Hose Shuttle Hose Adapter Plug Tee

13 14 15 16

031783 020139 031784 020036

Hose Elbow Hose Elbow

ITEM

TO RETURN MANIFOLD 1 2

3

4-13 TO HYDRA-SWIVEL 10

TO 2 SPOOL VALVE

• CED 63

QTY 1 1

3 1 1

3 1 1 2 3 2 2 1 1 1 1

TO 3 SPOOL VALVE

lePrAfEP ."//AWN' a

EFFECTIVE

BRAKE SYSTEM - UPPER UNDERCARRIAGE

SN Date

PAGE 4

N

10

ITEM 1 2 3 4 5 6 7

8 9 10

N

PART NUMBER

DESCRIPTION

400290 031692 020350 020206 031760 020174 031681 031682 031690 031691 020362 020797 020796

Snap Ring Center Swivel Swivel Elbow Tee Hose Reducer Tube L.H. (12'8" Tube R.H. (12'8" Tube L.H. (11'8" Tube R.H. (11'8" Connector Adapter Reducer

"ffPrne, UNDERCARRIAGE

Tracks) Tracks) Tracks) Tracks)

2 1 1 1 2 2 1 1 1 1 2 2 2

EFFECTIVE

BRAKE SYSTEM - LOWER .

7/ffeb, CED 63

QTY

SN Date

/ PAGE 5

PART ITEM NUMBER DESCRIPTION 1 2 3 4

/

/

5 6 7 8 9 10 11 12 13 14

•••,

„

„ .„s.

.. „ .

'''••C isr.„,

I

.

', ,,,,

•„.

'‘,.„.„ •.„,‘

“

,,,,,,,,,

I J

1

4.4"•

"RE: Nut Lockwasher Upper Spacer Bolt End Plate Lockwasher Bolt Bolt Skid Plate

14

.

„ ..

s„,

800267 800212 400183 400518 800210 400094 400056 800266 400326 800204 400097 400198 400329 800103

'''

4,..,:,,,,,,,....

Pi?

/f '• ■ ..%s.

(1) //

I •,,,

--/Oein-ffirrner CED 63

CROSS TUBE AND SKID PLATE UNDERCARRIAGE

EFFECTIVE SN 12-1624 Date January 15, 1970

QTY 4 4 4 4 4 8 8 4 8 4 16 12 4 1

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13

10

PART NUMBER 400441 400423 800962 800963 800964 800959 800007 800906 800957 800072 800075 800003 800961 400554

DESCRIPTION Bolt Lockwasher End Plate Shim 22 Gauge Shim 16 Gauge Bearing Block Assembly Seal Bushing Bearing Block Thrust Washer Key Idler Idler Shaft Grease fitting

QTY 8 8 4 As Req'd As Req'd 4 8 4 4 4 2 2 2 4

N N

N

N

CRAWLER MODELS ONLY

IDLER AND IDLER SHAFT m

CED 63

firin "NP/WP, 'Af UNDERCARRIAGE

EFFECTIVE SN 12-1860 Date May 14, 1971

14:717E77

ITEM

2 3 4 5 6 7 8

PART NUMBER

DESCRIPTION

800032 800150 800236 400056 400452 800237 800012 800085 800525 800033 400307

Adjustor Shaft 11'6" & 12'8" Tracks Adjustor Shaft 10'4" Tracks Shim Retainer Lockwasher Bolt Spacer Shim 1/4" Shim 1/8" Shim 16 Gauge End Plate Bolt

QTY 4 4 4 12 4 4 As Re s Reccti :4(1 As Req'd 4 8

,/ \

N

TRACK ADJUSTOR ASSEMBLY (IDLER END) UNDERCARRIAGE

PAGE 8

ITEM 1

2

PART NUMBER 801486 801485 801505 801504 801491 801492 801515 801514 801452 801164

3

800002 800079

ffebt-fferner CEO 63

4

801062

5

400960

DESCRIPTION

QTY

Side Frame L.H. w/A.C. Rollers (12'8" Side Frame R.H. w/A.C. Rollers (12'8" Side Frame L.H. w/H.W. Rollers (12'8" Side Frame R.H. w/H.W. Rollers (12'8" Side Frame L.H. w/A.C. Rollers (11'8" Side Frame R.H. w/A.C. Rollers (11'8" Side Frame L.H. w/H.W. Rollers (11'8" Side Frame R.H. w/H.W. Rollers (11'8" A.C. Roller Assembly (12'8" Tracks) A.C. Roller Assembly (11'8" Tracks) H.W. Roller Assembly (12'8" Tracks) H.W. Roller Assembly (11'8" Tracks) 24" Street Shoe (12'8" Tracks) 24" Street Shoe (11'8" Tracks) 32" Street Shoe (12'8" Tracks) 32" Street Shoe (11'8" Tracks) Slider (11'8" Tracks) Slider (12'8" Tracks) Bolt (11'8" Tracks) Bolt (12'8" Tracks)

Tracks) Tracks) Tracks) Tracks) Tracks) Tracks) Tracks) Tracks)

1 1 1 1 1 1 1 1 10 8 10 8 48 44 48 44 4 2 8 4 EFFECTIVE

ENCLOSED DRIVE - SIDE FRAME ASSEMBLY UNDERCARRIAGE

SN Date PAGE 9

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

801456 801466 220162 220163 451588 801469 801463 801464 801465 801462 400023 401170 801459 801458 801457 801453 400172 400398

Shaft Roller Bearing Cone Bearing Cup Seal Kit' Shim (.003) Shim (.007) Shim (.010) Shim (.032) Retainer Lockwasher Capscrew Seal Spring Assembly Boot Seal Retainer Clamp Lockwasher Bolt

OTY 1 1 2 2 2 As Req'd As Req'd As Req'd As Req'd 2 12 12 2 2 2 2 4 4

15

A1/407"ffPniEr CED 63

TRACK ROLLER AND SHAFT UNDERCARRIAGE

PAGE 10

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

z z z

z

PART NUMBER

DESCRIPTION

240099 240100 010060 801405 220155 010161 801417 401153 801408 801393 801424 010128 801406 220156 400355 400441 801429 801428 801449 801450 801388 400198 020739

Propel Gear Box L.H. Propel Gear Box R.H. 0-Ring Bearing Housing Bearing Cup Seal Lock Plate Bolt Tumbler Tumbler Shaft Spacer 0-Ring Thrust Collar Bearing Cone Lockwasher Bolt Shim (.002) Shim (.005) Shim (16 GA) Shim (22 GA) Bearing Adjustor Bolt Plug

QTY 1 1 2 2 4 8 6 10 2 2 2 2 2 4 12 12 As Req'd As Req'd As Req'd As Req'd 2 12 4

zz

7

z z

21

20 22

mm

7#17th "&Win EP

CED 63

PROPEL GEAR BOX AND TUMBLER

UNDERCARRIAGE

PAGE 11

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

30 , 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

mmwm

PART NUMBER

DESCRIPTION

451636 451638 451637 451639 451640 451642 451643 451644 451641 451645 451193 451646 451647 451648 451650 451649 451651 451652 451653 451654 451655 451656 451657 451658 451659 451660 451661 451662 451663 451664 451665 451666 451667 451668 451669 451670 451671 451672 451673 451674 451675 451676 451677 451678 451679 451680 451681 451682 451698 451699 451700 451701 451702

1 Housing Cover 1 0-Ring 1 Cover 47 21 Lockwasher 17 Bolt 1 Cover 1 0-Ring 1 Cover 2 Plug 1 0-Ring 2 Dowel 22 Bolt ( 1 1/2 In. Long) 6 Bolt ( 1 1/4 In. Long) 33 Lockwasher 2 Plug 1 Gasket As Req'd Shim (.005) As Req'd' Shim (.007) As Req'd Shim (.020) 1 Bearing Cup 1 Bearing Cone 1 Gear 1 Bearing Cone 1 Bearing Cup 1 Housing 1 Bearing Cup 1 Bearing Cone 1 Shaft 1 Gear 1 Bearing Cone 1 Bearing Cup As Req'd Shim (.005) As Req'd Shim (.007) As Req'd 47 Shim (.020) As Req'd 48 Shim (.005) As Req'd 49 Shim (.007) As Req'd 50 Shim (.020) 2 Bearing Cup 51 2 Bearing Cone 52 1 Shaft 53 1 Gear 54 Adapter Plate 1 55 1 0-Ring 56 2 Bearing 57 1 Shaft 58 1 Seal 59 1 Plate , 60 1 Gasket 61 1 Stud 62 1 Lockwasher 63 Nut 64 1 Seal 65 1 1 Cap 66

7010/4" mffiginEr

CED63

QTY

31 41111111■

16 17

•

18

337 451697 451696 451693 451694 451695 451692 451691 451690 451689 451683 450924 451209 451684 451685 451686 451687 451688 450747 450748 451219

Bolt Cover Backup Ring 0-Ring Piston Valve Housing 0-Ring Nut Spring Retainer Brake Lining Spring Brake Actuator Brake Assembly Brake Housing Rod Sleeve Spring Pin Cotter Pin Bolt

1 2 2 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1

47Ar nolle

(111)111 1 1 1 1 1 1 0 1 1 1 1 1 1 111111 111111111

25 34 32 -

-

31

24 23

"

19

'

0004 20 N N

I

21 7//

,----22

EFFECTIVE

PROPEL GEAR BOX UNDERCARRIAGE

SN Date

PAGE 12 }.....mmilim....

ITEM 1 2 3 4

TRACK SHOE AND PIN ASSEMBLY

CED 63

UNDERCARRIAGE

PART NUMBER

DESCRIPTION

800002 800079 801113 400038 400996

24" Street Shoe 32" Street Shoe Track Pin Bolt Sq. Nut

QTY As As As As As

Req'd Req'd Req'd Req'd Req'd

EFFECTIVE

SN Date

PACE 13