Hein-Werner Series C12B Hydraulic Backhoes Parts Manual 9308136 - PDF DOWNLOAD

SERIAL NO.

Parts Manual for Series C12B Hydraulic Backhoes

NOTE: The parts pages are intended for use in ordering parts, and therefore do not always depict the correct way to assemble components.

hfehii7-,Pmet e)1367

CONSTRUCTION EQUIPMENT DIVISION WAUKESHA, WISCONSIN 53186

ABOUT THIS MANUAL

This manual incorporates a new simplified page numbering system. The book is divided into major categories or sections, each of which is separated by an index tab sheet. Pages are numbered consecutively within each section. For example, let's say the section entitled "Pumps and Motors" contains the following pages: Page .1 Page 2 Page 3 Page 4

Dipstick or Boom Pump Swing and Boost Pump Swing Motor Propel Motor

Should we add a pump to the machine at a future date, it would simply become "Page 5".

If we change one of the existing paes, the new page would have the same number. For example, if we change the vendor on the swin motor, a new page would be prepared. This new page would also be "Page 3". In other words, each Master. Parts Manual would then contain two page 3's.

The effective date and serial number block will be your key to determine which page to use for a particular machine.

Each page includes the name of the major category it is a part of. This is found below the title of the page itself, and will enable you to file newly released pages in their proper location in your Master Parts Manual.

As in the past, customer manuals will be individually assembled, and contain only those pages which apply to his particular machine.

CED 69

.

INSTRUCTIONS FOR ORDERING REPLACEMENT PARTS

To assure prompt and accurate service, include the following data with each parts order:

1.

2.

3.

4.

5.

6.

Purchase Order Number Model and Serial Number of Machine Parts Numbers Part Descriptions Quantity of each part desired Method of transportation

Confirm all telephone and telegraph orders in writing. Besure these orders are marked "Confirmation", to avoid duplication of orders.

INSPECTION OF SHIPMENTS

Carefully inspect all shipments upon arrival. In the event of loss or damage, do not accept the shipment until the transportation company either makes a notation on the freight bill, or gives you an inspection report covering said damage or loss. In the event of concealed damage or loss, notify the carrier at once (within 20 days) requesting that an inspection be made and damage or loss be acknowledged.

USE ONLY GENUINE HEIN-WERNER PARTS FOR MAXIMUM PERFORMANCE

CED 69

ii

WHERE TO ORDER PARTS

Contact the Hein-Werner dealer in your area when placing parts orders. Hein-Werner Dealers are conveniently located throughout the United States and Canada. These Dealers maintain a stock of genuine Hein-Werner replacement parts so that orders are filled as quickly as possible. To aid the dealer in processing your order promptly and correctly, you should supply the following information: 1.

2.

3.

4.

5.

Model and Serial Number of your Machine.

Part Numbers of items desired Part Descriptions Quantity of each part desired Method of transportation INSPECTION OF SHIPMENTS

Carefully inspect all shipments upon arrival. In the event of loss or damage, do not accept the shipment until the transportation company either makes a notation on the freight bill, or gives you an inspection report covering said damage or loss. In the event of concealed damage or loss, notify the carrier at once (within 20 days) requesting that an inspection be made and damage or loss be acknowledged.

USE ONLY GENUINE HEIN-WERNER PARTS FOR MAXIMUM PERFORMANCE

CED 69

ii

Afehiffprner

OPERATION The information in this manual is designed to furnish the owner and operator of the Hein-Werner C 12B Backhoe with the basic information needed to understand the operation of the machine.

For safe and efficient operation, first become familiar with the location and purpose of all controls and instruments. Study the following pages carefully, regardless of your previous experience.

SAFETY FIRST THE COMPLETE OBSERVANCE of this one simple motto would prevent many thousand serious injuries each year.

CED 69

PAGE 1

ENGINE CONTROLS AND INSTRUMENTS

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

CED 69

Dome Light Switch Flood Light Switch Flood Light Switch Tachometer (with hourmeter) Engine Speed Control Cigarette Lighter Fuel Gauge Ammeter Water Temperature Gauge Engine Oil Pressure Gauge

11.

12.

13.

14.

15.

16.

17.

18.

19.

Reservoir Oil Temperature Warning Light Hydraulic Filter Pressure Warning Light Ignition Switch Summation Mode Selector Horn Button Engine Shutdown Control Emergency Engine Shutdown Control Starter Button Heater Switch

PAGE 2

ENGINE AND INSTRUMENTS

When operating the machine, periodic attention should be given to the instrument panel gauges and warning lights. This will prevent any minor malfunction from becoming a major breakdown.

WARNING LIGHTS

11. Reservoir Oil Temperature Warning Light: This warning light will glow if the hydraulic oil overheats. If this happens, immediately stop the engine and investigate the cause.

12. Filter Pressure Warnin•Li ht: This warning light will glow 1 t e y rau is fl ter becomes clogged or inoperative. It is not to be used to determine filter replacement. For filter replacement, refer to the Lubrication section. .

GAUGES

4.

Tachometer: The engine governed speed has been preset at 2500 R.P.M. (clutch engaged) at full throttle. The engine should never exceed 2650 R.P.M.

8.

Ammeter Gauge: The ammeter indicates either battery charge or discharge depending on the condition of the battery.

9.

Water Temperature Gauge: Under normal engine operating conditions the water temperature should be 160 to 185 F.

10. Engine Oil Pressure Gauge: The oil pressure gauge should indicate 40 to 60 P.S.I. at full throttle. Should the pressure fall below this range (other than at idle) immediately shut off the engine and investigate the cause.

CED 69

PAGE 3

JOY STICK CONTROLS SWING LEFT

DIPSTICK OUT

SWING RIGHT BUCKET IN

BOOM DOWN

BUCKET OUT

DIPSTICK IN

DIGGING CONTROL LEVERS

Operators not familiar with hydraulic machines may tend to over-control and thereby cause rough operation of the machine. Therefore, it is recommended that the machine be operated slowly until the operator becomes thoroughly oriented with the controls.

1. Boom Control Lever A.

To raise the boom, pull back on the right hand control lever.

B. When the control lever is returned to the neutral position (center), the boom will remain positioned.

C. To lower the boom, push the right hand control lever forward.

CED 69

PAGE 4

DIGGING CONTROL LEVERS (Cont.)

2. Swing Control Lever A. To swing the platform in a clockwise direction, disengage the swing brake and push left hand control lever to the right.

B. To swing the platform in a counter-clockwise direction, push the left hand control lever to the left.

C. To stop swing rotation in either direction, feather the control lever in the opposite direction until rotation stops.

CAUTION: WHENEVER THE MACHINE IS NOT - BEING OPERATED, ALWAYS ENGAGE SWING BRAKE AND LOWER BUCKET TO THE GROUND. 3. Dipstick Control A. To tuck the dipstick, pull back the left hand control lever.

B. When the left hand control lever is returned to the neutral position (center), the dipstick will remain positioned.

C. To extend the dipstick, push the left hand control lever forward.

4. Bucket Control A. To curl bucket, push the right hand control lever to the left.

B. When the control lever is returned to the neutral position (center), the bucket will remain positioned.

C. To dump bucket, push the right hand control lever to the right.

A Careful Operator IS THE BEST INSURANCE AGAINST AN ACCIDENT

CED 69

PAGE 5

CONVENTIONAL CONTROLS SWING LEFT

DIGGING CONTROL LEVERS

Operators not familiar with hydraulic machines may tehd to over-control and thereby cause rough operation of the machine. Therefore, it is recommended that the machine be operated at half throttle or less until the operator becomes thoroughly oriented with the controls.

1. Boom Control Lever A. To raise the boom, pull back on the right hand control lever.

B. When the control lever is returned to the neutral position (center), the boom will remain positioned.

C. To lower the boom, push the right hand control lever forward.

CED 69

PAGE 6

DIGGING CONTROL LEVERS (Cont.)

2. Swing Control Lever A. To swing the platform in a clockwise direction, disengage the swing brake and pull the left hand control lever back.

B. To swing the platform in a counter-clockwise direction, push the left hand control lever forward.

C. To stop swing rotation in either direction, feather the control lever in the opposite direction until rotation stops.

CAUTION: WHENEVER THE MACHINE IS NOT BEING OPERATED, ALWAYS ENGAGE SWING BRAKE AND LOWER BUCKET TO THE GROUND. 3. Dipstick Control Pedal A. To tuck the dipstick, push down with the heel of the right foot on the dipstick control pedal.

B. When the dipstick control pedal is returned to the neutral position (center), the dipstick will remain positioned.

C. To extend the dipstick, push down with toe of the right foot on the dipstick control pedal.

4. Bucket Control Pedal A. To curl the bucket, push down with the heel of the left foot on the bucket control pedal.

B. When the bucket control pedal is returned to the neutral position (center), the bucket will remain positioned.

C. To dump bucket, push down with toe of the left foot on the bucket control pedal.

A Careful Operator IS THE BEST INSURANCE AGAINST AN ACCIDENT

CED 69

PAGE 7

FORWARD

RIGHT TRACK

REVERSE

PROPEL CONTROL LEVERS

The crawler undercarriage is in the accepted digging and traveling position when the propel gearboxes are to the rear. Follow the operating instructions below when the crawler is in this position. When the crawler is in a reversed position (propel gearboxes at the front) reverse the directional instructions.

NOTE: The propel brakes are set (engaged) whenever the machine is stationary. Moving the propel levers forward or backward releases the brakes. When the levers are returned to neutral, the propel brakes are automatically set again.

1. To propel machine forward, push both levers forward.

2. To propel machine backward, pull both levers backward.

3. To increase the speed in either direction, place the summation mode selector in the "HIGH" position. To decrease speed, place the mode selector in the "LOW" position.

4. To make a right hand turn, use any of the following procedures: A.

Push the left lever forward and leave the right lever in neutral.

B.

Pull the right lever backward and leave the left lever in neutral.

C. When working in close quarters, or when speed is required, a right hand "spin" turn may be made by simultaneously moving the left hand lever forward and the right hand lever backward.

5. To make a left hand turn, reverse the above directions.

NOTE: The control valves in the propel hydraulic circuit are detented to hold the spools in either of the two positions. The spool will not return to the neutral position unless the control lever is manually returned to the neutral position.

CED 69

PAGE 8

PREPARING TO START ENGINE

CAUTION: BEFORE STARTING THE ENGINE, BE SURE THE AREA IS ADEQUATELY VENTILATED. Prior to starting the engine, the following daily checks and servicing must be performed.

DAILY CHECK LIST 1.

Check the Engine Crank Case Oil Level

2.

Check the Hydraulic Reservoir Oil Level

3.

Check the Radiator Coolant Level

4.

Check the Battery Electrolyte Level

5.

Make Sure All Control Valves Are In Neutral Position

6.

Perform Daily Lubrication

STARTING THE ENGINE

Before starting the engine for the first time, refer to the engine manufacturers operating manual.

NOTE: The engine may require the use of a cold weather starting aid in areas with low ambient temperatures.

1.

Make sure the manual shut-down control and the emergency shut-down control are in the open position.

2.

Set the throttle control in the idle position. Engage starting motor.

If the engine fails to start within 30 seconds, disengage starter and allow the starting motor to cool a few minutes before trying again.

3.

Check the oil pressure gauge immediately after starting the engine. If there is no oil pressure indicated within 10-20 seconds, stop the engine and check the lubricating system. The minimum oil pressure should be at least 18 P.S.I. at 1200 R.P.M. The oil pressure at normal operating speed should be 40-60 P.S.I.

4.

Run engine at quarter throttle and no load for approximately five minutes to allow it to warm up before applying a load.

CED 69

PAGE 9

STOPPING THE ENGINE

1.

Release the load and decrease the engine speed.

2.

Allow the engine to run at half speed or less with no load for five minutes before closing the throttle and stopping the engine.

NOTE: The emergency shut-down control should never be used to stop the engine except in an emergency.

CED 69

PAGE 10

CONTROLS CHANGEOVER

The Hein-Werner Model C-12B Backh'oe has been designed to provide the operator with a choice of either conventional or joystick type controls. Simply reposition the control rods as shown in the following illustrations to convert your machine to the desired controls arrangement.

NOTE: Tag the rods as shown before attempting to change over the controls. This will eliminate possible confusion caused by the similarity of the control rods when disconnected. (Control rod "F" is the only rod that is not repositioned.)

CED 69

PAGE 11

A

C

JOY STICK CONTROLS

CED 69

PAGE 12

D

CONVENTIONAL CONTROLS

CED 69

PAGE 13

LUBRICATION

LUBRICATE CLUTCH BEARING WEEKLY GENERAL PURPOSE GREASE

CHECK RESERVOIR OIL LEVEL DAILY BEFORE START UP SAE 20 HYDRAULIC OIL

CHANGE HYDRAULIC FILTER ELEMENTS EVERY 250-350 HOURS

N

American Oil — Rykon No. 21 Cities Service — Pacemaker XD-20 Conoco — Super Hyd. 21 Gulf — Harmony 48 AW Humble — Nuto H48 Mobil — D.T.E. 25 Phillips — Magnus A215 Shell — Tellus 929 Sinclair — Duro AW-21 Sunoco — Sunvis 821 Texaco — Rando HD-C CHECK SWING GEAR BOX OIL LEVEL DAILY SAE 80-90 GEAR OIL

FOR ADDITIONAL SERVICE & MAINTENANCE INSTRUCTIONS REFER TO ENGINE MANUAL

LUBRICATE SWING BEARING WEEKLY GENERAL PURPOSE GREASE (4 FITTINGS)

CHECK ENGINE OIL LEVEL DAILY BEFORE START UP

LUBRICATE HYDRA-SWIVEL CAP WEEKLY (1 FITTING) GENERAL PURPOSE GREASE

LUBRICATE OPEN SWING GEAR DAILY GENERAL PURPOSE GREASE

0

DRAIN FUEL FILTERS PERIODICALLY

CHECK COOLANT LEVEL DAILY BEFORE START UP

CHECK BATTERY WATER LEVEL DAILY BEFORE START UP

LUBRICATE CONTROL LINKAGE DAILY GENERAL PURPOSE GREASE (12 FITTINGS)

0

•

EFFECTIVE

UPPER STRUCTURE

1/Phl-NEW1PP CED 69

LUBRICATION

SN Date

PAGE 1

ITEM NO.

BOOM CYLINDER BASE PINS (1 FITTING)

2

BOOM PIVOT BUSHINGS (2 FITTINGS)

3

BOOM CYLINDER ROD PIN (1 FITTING)

4

DIPSTICK CYLINDER BASE PIN (1 FITTING)

5

DIPSTICK CYLINDER ROD PIN (1 FITTING)

6 7

BUCKET CYLINDER BASE PIN (1 FITTING)

8 9

10

DESCRIPTION

1

DIPSTICK PIVOT PIN (1 FITTING) BUCKET CYLINDER ROD PIN (1 FITTING) BUCKET LINK BUSHINGS (4 FITTINGS)

10

BUCKET LINK PIN BUSHINGS (2 FITTINGS)

11

BUCKET PIN BUSHINGS (2 FITTINGS)

NOTE: IN SEVERE DIGGING CONDITIONS . AND FOR LONGER LIFE LUBRICATE BUCKET LINKAGE 3 TIMES DAILY.

11

LUBRICATE ALL FITTINGS ON DIGGING MEMBER DAILY WITH A GENERAL PURPOSE GREASE

Yeb/ • tePtil CEO 6 9

EFFECTIVE

DIGGING PACKAGE SN

LUBRICATION

Date

/ PAGE 2

CAUTION:

CHECK PROPEL GEAR BOX OIL LEVELS WEEKLY SAE 80-90 GEAR OIL

NOT FOR LUBRICATION PURPOSES. THIS LUBRICATION FITTING USED FOR ADJUSTING TRACK ASSEMBLY ONLY.

IDLER SHAFTS ARE PERMANENTLY SEALED (SAE 80-90 GEAR OIL)

ROLLERS HAVE LIFETIME SEALS (SAE 80-90 GEAR OIL)

TUMBLER SHAFT BEARINGS ARE PERMANENTLY SEALED (SAE 80-90 GEAR OIL)

UNDERCARRIAGE

LUBRICATION

PAGE 3

HEIN-WERNER

Ready-Reference Filter Element Listing for Model C12B with Detroit Diesel 4-53 .

ENGINE OIL All machines use GM #PF132.

PRIMARY FUEL All machines use GM #T60.

SECONDARY FUEL All machines use GM #158.

AIR FILTER 1. All machines with Farr #P-12, use Hein-Werner #450601.

2. All machines with Farr #P-16, use Hein-Werner #450683.

3. All machines from serial number 12-1658 to 12-1848 use Hein-Werner #450787 (vendor #250C29-S) or 450967 (vendor #P1020571).

4. All machines from serial number 12-1849 to 12-1975, use Hein-Werner #450787.

5. All machines after serial number 12-1976 thru current production, use Hein-Werner #300265.

HYDRAULIC OIL 1. All machines #450330.

2. All machines #450331.

3. All machines 4. All machines

with Gresen disposable paper elements, use Hein-Werner with Gresen cleanable mesh elements, use Hein-Werner with Ripley filters, use Hein-Werner #050026. after serial number 12-2031, use Hein-Werner #050063.

.

Note: Engine oil and fuel filters may be obtained at your local Detroit Diesel Distributor.

CED 69

PAGE 4

ITEM 1 2 3

7

4 5 6 7 8 9 10

PART NUMBER

DESCRIPTION

401158 401160 401156 400195 150156 400017 150155 990045 990044 120008

As Tooth Pin-25 Series As Tooth Point-25 Series As Tooth Shank-25 Series Bolt R.H. Side Cutter Nut L.H. Side Cutter L.H. Hinge Plate W/Bosses R.H. Hinge Plate W/Bosses As Boss

QTY Req'd Req'd Req'd 8 1 8 1 1 1 Req'd 10

BUCKET PARTS ATTACHMENTS

PAGE 1

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

20

PART NUMBER 220068 100490 100491 100492 210314 401204 400423 400441 110429 110430 400023 400038 220179 400026 150651 401315 220028 400015 150658 220176 210257 040978 110440 110443

DESCRIPTION

QTY

2 Bushing As Req'd Shim (7 Ga.) Shim (12 Ga.) As Req'd Shim (18 Ga.) As Req'd 1 Pin 1 Pin Retainer 3 Lockwasher 3 Bolt 1 Dirt Shield 2 Bar 2 Lockwasher 2 Bolt 4 Bushing 4 Cotter Pin 2 Bell Crank 4 Lock Pin 2 Bushing 8 Grease Fitting 1 Bucket Link 2 Bushing 4 Pin 1 Bucket Cylinder Assembly 1 Mounting Bracket 1 Dipstick

ATTACHMENTS CED•69

DIPSTICK AND LINKAGE

PAGE 2

17 16

PART ITEM NUMBER

DESCRIPTION

QTY

13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

hrein-Oppoor CED 69

100908 400015 220068 210320 440441 400423 401204 210313 040979 210303 210314 210270 210112 400411 210315 040977 110440

Boom Assembly Grease Fitting Bushing Pin Bolt Lockwasher Pin Retainer Pin Boom Cylinder Assembly Pin Pin Pin Spacer Lock Nut Pin Dipstick Cylinder Assembly Mounting Bracket

1 3 2 1 4 4 4 1 1 1 1 1 1 1 1 1 1

EFFECTIVE

BOOM ASSEMBLY SN ATTACHMENTS

/ate

PAGE 3

(Th,

'1 ► ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

PART NUMBER 400015 220175 401261 040949 401262 010181 040902 010184 401316 400756 041024 010027 010186 040961 010128 010187 040969 401379 040976 010103 020492 400666 400023 400022 400036 400693 031984 040958 400422

DESCRIPTION Grease Fitting Bushing Snap Ring Rod Bolt Rod Wiper Rod Guide Packing Bolt Washer Butt Plate Piston Ring Piston Ring Piston 0-Ring Backup Ring Head Bolt Guard 0-Ring Plug Flange Lockwasher Bolt Bolt Clamp Tube Cylinder Body Nut

Note: Order Part No. 040972 for Cylinder Assembly without tubes.

QTY 2 2 4 1 6 1 1 1 3 3 1 2 2 1 1 1 1 4 1 1 2 2 8 4 4 1 1 1 4

11 —1

r-

15 \

16

12

10 9

► ►

17

25 23 26 _27

18 I

19—

20

/ 22

QiN

23 24

21

28

29

745f9h/fferniir CED 69

BUCKET CYLINDER (040978) CYLINDERS

EFFECTIVE SN

Date

7

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

PART NO. 400015 220175 401261 040948 401262 010181 040902 010184 401316 400756 041024 010027 010186 040961 041039 010092 010128 010187 040969 401379 040975 010103 020492 400459 400023 400022 400036 401263 031981 040957 400422

DESCRIPTION Grease Fitting Bushing Snap Ring Rod Bolt Rod Wiper Rod Guide Packing Bolt Washer Butt Plate Piston Ring Piston Ring Piston Spacer 0-Ring 0-Ring Back-up Ring Head Bolt Guard 0-Ring Plug Flange Lockwasher Bolt Bolt Clamp Tube Cylinder Body Nut

'1

QTY 2 2 4 1 6 1 1 1 3 3 1 2 2 1 1 1 1 1 1 4 1 1 2 2 8 4 4 1 1 1 4

13

13

12

14 13 12 18

17

16

15

28

29 20 I

21 Note: Order Part No. 040971 for Cylinder Assembly without tubes.

22

23-----9 25 26

4;1'31

•--740/enfferne, CED 69

EFFECTIVE

DIPSTICK CYLINDER (040977) CYLINDERS

SN Date

AT AGE 2

ITEM

PART NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

400015 220172 010178 040950 400401 010179 040822 010185 401316 400756 040996 010208 010122 040960 010177 010180 040878 401239 010104 400459 400023 400022 400555 401263 031986 031985 040959 400658 020492

DESCRIPTION Grease Fitting Bushing Snap Ring Rod Assembly Bolt Rod Wiper Rod Bearing Packing Bolt Washer Butt Plate Piston Ring Piston Ring Piston 0-Ring Back-up Ring Head Bolt 0-Ring Flange Lockwasher Bolt Bolt Clamp Tube Tube Cylinder Body Nut Lock Plug

QTY 2 2 4 1 6 1 1 1 4 4 1 2 2 1 1 1 1 4 2 4 12 8 4 4 1 1 1 4 2

13

12

14 13

17

16

15

1 12

ft/

20 19 1 \ I Y3 221

18

Note: Order Part No. 040973 for Cylinder Assembl y without tubes.

21 28

---/Afeln-fferner CED 69

EFFECTIVE

BOOM CYLINDER (040979) CYLINDERS

SN Date

PAGE 3

ITEM 1 2 3 4 5 6 7 8 '9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

PART NUMBER 452283 452284 452285 452286 452287 452175 452019 452020 452021 452288 452017 452289 452290 452291 452292 452293 452276 452277 452294 451524 452295 452296 452275

DESCRIPTION Bolt End Cap 0-Ring Housing Cam Ring Assembly Cam Ring Rotor Pin Vane Cam Ring Assembly Dowel Pin Cam Ring Bearing Bearing Adapter Port Plate Mounting Cap Snap Ring Bearing Shaft Seal Seal Retainer 0-Ring Snap Ring

m•'7/KEF/W affernEr CED 69

QTY 4 1 2 1 1 1 2 20 20 1 3 1 2 1 1 1 2 1 1

1 1 1 1

EFFECTIVE

PUMP ASSEMBLY (000277 & 000278) PUMPS AND MOTORS

SN Date

PAGE 1

ITEM NUMBER 1 2 3 4 5 6 78 9 10 11 12 13

.

450394 452438 450756 450437 450403 450418 450436 450764 .450399 452439 452440 450061 450762

DESCRIPTION Seal Shaft End Cover Plug • Seal Roller Bearing Thrust Plate Pocket Seal Set Gear Set Gasket Gear Housing Port End Cover Washer Bolt

111/P.thaffff171P/' CED 69

QTY 1 1 2 1 4 2 1 1 2 1 1 4 4

PUMP ASSEMBLY (000311) (SB) PUMPS AND MOTORS

EFFECTIVE SN Date

PAGE 1

ITEM NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

452272 452273 452274 452275 452276 452277 452278 451524 452279 452280 452023 451385 452022 452017 452021 452020 452019 452018 452281 452015 452014

CED 69

4

DESCRIPTION

QTY

Bolt Housing Cartridge Assembly Snap Ring Snap Ring Bearing Shaft Seal 0-Ring Mounting Cap Seal Seal Pressure Plate Dowel Pin Vane Pin Rotor Cam Ring Port Plate Pin Screw

4 1 1 1 2 1 1 1 1 1 1 1 1 2 10 10 1 1 1 1 2

,./. • 'ffEWIPP

EFFECTIVE

SWING PUMP (000294) PUMPS AND MOTORS

SN Date

Ammil.......

PAGE 2

ITEM •al

•

1 2 3: 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

452246 452247 452248 452249 452250 451383 452251 452252 452142 452253 452254 452255 451414 452256 452257 452258 452259 452260 451398 451387 451397

DESCRIPTION Bolt End Cap 0-Ring Bearing Cam Ring Assembly Dowel Pin Cam Ring Rotor Spring Vane Port Plate 0-Ring 0-Ring Body Wiper Seal Shaft Assembly Shaft Bearing Snap Ring Snap Ring

m7/./frien 4A7PirPr

ffi'm • CED 69

QTY 4 1 1 1 1 2 1 1 30 10 1 1

SWING MOTOR (000270) PUMPS AND MOTORS

EFFECTIVE SN Date

Agagulalima

PAGE 3

•

ITEM

PART NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

452136 452137 452138 452139 452140 452141 452142 452143 452144 452145 452146 452147 451388 452149 452150 452151 452152 452153 452154

DESCRIPTION Bolt End Cap •Bearing Dowel Pin Cam Ring Assembly Cam Ring Spring Vane Rotor Port Plate Seal Seal Snap Ring Seal Retainer Assembly Shaft -) Snap Ring c( Bearing -) Housing 0-Ring

. WiblaNe P.Pffr - - -----// CED 69

QTY

b

4 1 1 4 1 1 40 10 1 1 1 .1 1 1 1 2 1 1

/7

•

10

PROPEL MOTOR (000245) PUMPS AND MOTORS

11

12

EFFECTIVE SN Date

PAGE 4

. PART ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

NUMBER

450394 451357 450756 450437 450403 450767 450418 450399 451356 451570 451573 451566 451569 450765 .450061 451564 450043

DESCRIPTION Shaft Seal Shaft End Cover Plug Seal Ring Roller Bearing Pocket Seals Thrust Plate Gasket Seal Gear Housing Matched Gears Bearing Carrier Shaft Matched Gears Port End Cover Washer Stud Nut

QTY 1 1 1 4 8 2 Strips 4 4 1 Set 1 1 1 Set 1 4 4 4

17

/ 16

,./ / 14 /

15 \

?

4 \

I7

9

VENDOR NUMBER 1150B-278-BIOG 15-7 DOG 15-1

5

-S.P.MPF LED 69

.1-

#e

7

TANDEM POWER BOOST PUMP (GMC) 000172

EFFECTIVE SN 12-2040

PUMPS AND MOTORS

Date March 27, 1972

JIZIT

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 5

451894 451900 451891 451892 451895 451893

Nut Inlet Section Plunger Section Plunger Section Stud Outlet Section

CED 69

Ofrbi

NAVri

QTY 6 1 2 1 3..

1

EFFECTIVE

BOOM, BUCKET.AND PROPEL CONTROL VALVE (000228) SN

VALVES

Date

ITEM 1 2 3 4 5 6

PART NUMBER 451894 451900 451896 451892 , 451897 451893

DESCRIPTION Nut Inlet Section Plunger Section Plunger Section Stud Outlet Section

QTY 6 1 1 1 3 1 .

DIPSTICK AND PROPEL CONTROL VALVE (000229)

APIPIRFAEP CED 69

EFFECTIVE SN

VALVES

Date

PAGE 2

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5

451894 451890 451898 451899 451893

Nut Inlet Section Stud Plunger Section Outlet Section

Aehs-aferner CED-69

QTY 6 1 3 1 1

EFFECTIVE

SWING CONTROL VALVE (000230) VALVES

SN Date

PAGE 3

11 10

13 C-) 12 O

fe(re?eee/:: 17 14 is / 9 kit)

25 27

107 cc4V(:) ,0

ZO

ITEM

PART NUMBER'

DESCRIPTION

1 2 3' 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

451909 451910 451911 451912 451913 451914 451915 451916 451925 451924 452189 451917 451918 451919 451920 451921 451922 451923 451926 451927 451928 451929 451930 451931 451932 451933 451934

Nut Cap 0-Ring Backup Ring 0-Ring Adjusting Screw Spool & Housing (Matched) Relief Cartridge 0-Ring Backup Ring 0-Ring 0-Ring 0-Ring Spring Body Ball Spring Piston 0-Ring Cap Plug Spring Piston Spring 0-Ring Plug Plug

QTY 1 1.

2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2 1 1

/ 22 23

3

21

24 25

CONTROL VALVE INLET SECTION (451890) CED 69

VALVES

PAGE 4

14

13

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

451935 451936 451937 451938 451939 451940 451941 451942 451943 451944 451945 451946 451917 451918 451947 451948 451949 451950 451951

Bolt Cover Adjuster Backup Ring 0-Ring Spring Seat Spring Relief Cartridge Plate Spacer 0-Ring Spool & Housing (Matched) 0-Ring 0-Ring Anti-cavity Cartridge Spool End Spring Piston Screw

QTY 2 1 1 2 2 2 1 1 2 2 2 1 1 1 1 1 2 2 2

15

12

EFFECTIVE

CONTROL VALVE PLUNGER SECTION (451891) SN CED 69

VALVS

Date

PAGE 5

10

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

451952 451953 451954 451955 451956 451957 451942 451946 451917 451918 451950 451949 451939 451938 451948 451951 451943 451944 451945 451958 451959 451940 451941 451960

End Cap Spring Seat Ball Spring Sleeve Adjuster Relief Cartridge Spool E Housing (Matched Set) 0-Ring 0-Ring Piston Spring 0-Ring Backup Ring Spool End Screw Plate Spacer 0-Ring Plate Sleeve Spring Seat Spring Bolt

QTY 1 1

2 1

1 1

2 1 1 1

2 2 2 2 1 2 1 2 2 1 1 2 1 4

.

22 21

CONTROL VALVE PLUNGER SECTION (451892)

wm"i'16•7/.#01/1487PrnPr CED 69

VALVES

EFFECTIVE SN Date

/ PAGE 6

26 11 10

12

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

451961 451962 451963 451911 451964 451965 451966 451967 451946 451917 451918 451942 451948 451938 451939 451949 451950 451951 451943 451944 451945 451940 451941 451937 451936 451935

Plug 0-Ring Body 0-Ring Spring Piston Wiper Ring 0-Ring Spool & Housing 0-Ring 0-Ring Relief Cartridge Spool End Backup Ring 0-Ring Spring Piston Screw Plate Spacer 0-Ring Spring Seat Spring Adjuster Cover Bolt

17 16 151 4

QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 1 1 1 2

'

CONTROL VALVE PLUNGER SECTION (451896)

ffeht-aferner CED 69

13

EFFECTIVE

SN

VALVES

Date

PAGE 7

10

CONTROL VALVE PLUNGER SECTION (451899) CED 69

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13

451935 451936 451968 451940 451941 451943 451942 451969 451917 451918 451951 451944 451945

Bolt Cover Adjuster Spring Seat Spring Plate Relief Cartridge Spool & Housing (Matched) 0-Ring 0-Ring Screw Spacer 0-Ring

QTY 2 1 1 2 1 2 2 1 1 1 2 2 2

EFFECTIVE PAGE 8

13

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

451909 451910 451911 451912 451913 451914 451915 451916 451925 451924.

452189 451917 451918 451919 451920 451921 451922 451923 451926 451927 451928 451929 451932 451934

Nut Cap 0-Ring Backup Ring 0-Ring Adjusting Screw Spool & Housing (Matched) Relief Cartridge 0-Ring Backup Ring 0-Ring 0-Ring 0-Ring Spring Body Ball Spring Piston 0-Ring Cap Plug Spring 0-Ring Plug

QTY 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2

21

CONTROL VALVE INLET SECTION (451900) CED 69

VALVES

EFFECTIVE

SN Date

779

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4

451962 451911 452190 451967

0-Ring 0-Ring Wiper Ring 0-Ring

1 1

1 1

/

'Si,

'4 10

%;*

ttketo,//1( y

•'

EFFECTIVE

ANTI-CAVITY VALVE CED 69

VALVES

SN Date

PAGE 10

,440 ,0 1ti, .6,

4, i

/

. ,. . . . ,

•• ...

1 ■

......

.

I

,

I

..„,„

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5

451911 451967 452190 452191 452192

0-Ring 0-Ring Wiper Ring 0-Ring Wiper Ring

2 1 1 1 1

■

i

•

ITEM

■

/".; :*,

■i

i 4'''• I / / % .... , ,,..., .....,

.4_7....

7.el

- -. _

..." •••..

--,

/ / /

... ...

-

77,.' -"""-*"............ r _.,..., / / / / ••••\$ / Ky, -.......„,i ,,/,‘,4 ;1 ,,,,,,,,,„, ;II , tii, / /

,

EFFECTIVE

PORT RELIEF VALVE

'74547/7041#PPffirr CED 69

VALVES

SN Date

PAGE 11

ITEM

PART NO. 452510 452511 452512 452513 452514

1 2 3 4 5

DESCRIPTION Nut Inlet Section Plunger Section Stud Outlet Section

QTY 3 1 2 3 1

SPEED BOOST VALVE (000232)

7Areth 'fferffeAr CED 69

EFFECTIVE SN

VALVES

Date

PAGE 12

PART NO.

ITEM

I

11

12

QTY

2 Plug 2 0-Ring Spool & Housing (Matched) 1 1 0-Ring 1 Back-up Ring 1 0-Ring 1 Cartridge 2 0-Ring 1 0-Ring 1 Screw 1 Ball 1 Spring 1 0-Ring 1 Plug 1 Spring

452515 452516 452517 451925 451924 451926 452518 452519 452520 452521 452522 452523 452524 452525 452526

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

10

DESCRIPTION

13 14

INLET SECTION C4525T1 CED 69

PAGE 13

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART NO. 452527 452528 452529 451926 452530 452531 452520 452519 452532 452533 452534 452535 452536 452537 452538 452539

DESCRIPTION

QTY

Bolt 2 Cover 1 Adjuster 1 2 0-Ring Spring Seat 2 Spring 1 0-Ring 1 0-Ring 2 0-Ring 2 Spacer 2 2 Plate 2 Screw 2 Spring Piston 2 Spool & Housing (Matched) 1 1 Spool End

Plunger Section (452512) VALVES

PAGE 14

PART NUMBER

ITEM 1 2

452482 452320

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

452483 452484 452321 452860 452485 452486 452487 452488 452489 452324 452756 452755 452862 452319 452490

NOTE:

QTY

DESCRIPTION Cartridge Assembly Summing Cap (Includes Item 1) Bolt (3/8-24 X 2 Gr 8) 0-Ring Relief • Cartridge Unloader Cartridge Bolt (3/8-16 X 3 Gr 8) 0-Ring 0-Ring 0-Ring Body Ring Check Valve 0-Ring (11/2" I.D.) 0-Ring (1" I.D.) Bolt (5/16-18 X 24 Gr 8) Relief Cap Bolt (3/8-24 X 1 3/4 Gr 8)

1 1 4 4 1 1 8 1 2 2 1 1 1 1 6 1 4

Item 18 - Kit to repair ring check valve is part no. 453574,5

* Orientation when facing machine.

SUMMING VALVE (000267 L.H. & 000276 R.1 1•)* -

"""7/ilein &Wier C-12B

VALVES

PAGE 14-00A

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7

452544 452545 452546 452547 452548 452549 452550

Screw Handle Repair Kit 0-Ring Backup Ring 0-Ring Nut

1 1 1 1 1 1 1

..., ..............

r

• 0.....-;; ;;;;A \

-..

..... ..."

1

...- ........ ,

1

• .. a)

014I ‘V

>e.

............

...............

MODE SELECTOR VALVE (000269)

ileitimarigiffe, CED 69

VALVES

EFFECTIVE SN Date

PAGE 16

'

\

11

10

-i..-.•-=-1,1,

l

12

el'

5! fi

,

1

ii <-4'

12

f.,,k, ,.

.=;--

-•:.:"'

—

13

111

4-2=4.0

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

010103 400666 400023 400022 031989 032288 031930 400459 010104 032287 031992 401274 401270 401269 400266 400405

0-Ring Flange Lockwasher Bolt Hose Tube Hose Flange 0-Ring Tube Tube Channel Clamp (11/4") Clamp (1") Clamp Bolt

6 12 42 40 2 2 2 8 4 2 2 6 8 12 2 2

BOOM LINES • • • • • • 0/P/Ar • 69 7 CED

lePPAW. HYDRAULIC CIRCUITS-UPPER

,

EFFECTIVE

SN Date

PAGE 1

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

PART NO.

DESCRIPTION

010053 400459 400023 400022 032176 032178 032177 400055 400056 400212 010012 000294 000279 000277 000276 020761 020317 010090 400849 400423 400632 020859 401341 032044 010052 400751 400056 400461 020827 400760 032045 032043 000280 000267 000278

0-Ring Flange Lockwasher Bolt Hose Hose Hose Nut Lockwasher Stud 0-Ring Pump Pump Assembly R.H. Pump Summing Valve Elbow Reducer 0-Ring Flange Lockwasher Bolt Insert Clamp Hose 0-Ring Flange Lockwasher Bolt Insert Clamp Hose Hose Pump Assembly L.H. Summing Valve Pump

QTY 4 8 16 16 1 1 1 6 6 6 3 1 1 1 1 2 2 2 4 8 8 2 4 1 1 2 4 4 1 2 1 1 1 1 1

4\ \ —2 \ 1

11

N

N

N

N

N N

12

10

13

f 14

N

N

—\15

33 \

34

18 19 20 21 7

23 Y

N

7

yy

y

32

r

-

N 22 23 24

22

23

PUMP PIPING CED 69

N

HYDRAULIC CIRCUITS - UPPER

EFFECTIVE

SN Dee

J47777;

ITEM

PART NO.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

03,2238 020860 032172 020861 000269 032229 000276 020857 032170 032174 032171 020858 020272 000252 020494 020303 032175 000267 020875 020716 020337

QTY

DESCRIPTION Hose Connector Hose Elbow Mode Selector Valve Tube Summing Valve R.H. Elbow Hose Hose Hose Tee Elbow Check Valve Nipple Tee Hose Summing Valve L.H. Elbow Tee Elbow

1 1 3 3 1 1 1 5 3 1 2 3 1 2 2 1 1 1 1 1 1

N

N

N

/

\

I 12 /

9

11

—

12

13

4 19

N

15

/1

■

14

10

18 N

12 •■•••

■••• ••

44\

17 ■••

■••••• •••

■ ••■•■•

•••••• •••••

14

15

SUMMATION PIPING

77777/hfem-fferner

HYDRAULIC CIRCUITS - UPPER

16

EFFECTIVE

SN Date

PAGE 3

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

PART NO. 010053 400459 400023 400022 032048 032049 400451 400380 400450 010051 000172 000311 400212 010109 220078 400056 400055 020904 400760 032045 010054 400697 400461 020728 032407 020484 032046 032406

DESCRIPTION 0-Ring Flange Lockwasher Bolt Hose Hose Bolt Lockwasher Flange 0-Ring Pump Assembly Pump Assembly Stud 0-Ring Bushing Lockwasher Nut Insert Clamp Hose 0-Ring Flange Bolt Insert Hose Insert Hose Hose

QTY 6 12 24 24 2 2 16 16 8 4 1 2 8 3 4 16 8 2 8 1 2 4 8 1 1 1 1 1

/

--,..

.'"

/ ---

/

/ /

/

-■

/ -'..--

.---- ---.-

/- --'

---

N.--N

N

N

./

i

\ _ - - - - \-- _

-

/

/

1 i 1

N

2

oN

/

N

WNN \ \3

4

\

// 1

NN

V

6

4\

4

3 IN

2.---

N NI NI

C5 1-'-'c) 19- 18 1°,.--.0.\ vawor g \iiil olle 8/7 1. )5 10

I

13 14.

9 10 -05

12

,, 1

12 18 19 22 19

27,

19

20 16

N ot /23

N

19

PIPING AT PUMPS (SB)

CED 69

HYDRAULIC CIRCUITS-UPPER

EFFECTIVE

SN Date

PAGE 3

•

d•

•

13

ITEM

o, •

1 2 3 4 5 6 7 8 9

10 11 12 13 14

PART NO. 020770 020812 020101 032022 032026 032028 400022 400023 400459 010053 032020 032052 032021 032023

DESCRIPTION

Connector Connector Plug Tube Tube Tube Bolt Lockwasher Flange 0-Ring Tube Tube Tube Tube

SUPPLY .PIPING (SB) • CED 69

HYDRAULIC CIRCUITS-UPPER

QTY

3 1 1 1 1 1 16 16 8 4 2 1

1 1

EFFECTIVE SN . Dee

. PAGE 4

ITEM 1 2 3 4 5 6 7 8 9 10 11

PART NO. 020770 020101 032022 032026 032028 400022 400023 400459 010053 032020 032021

DESCRIPTION Connector Plug Tube Tube Tube Bolt Lockwasher Flange 0-Ring Tube Tube

QTY 3 3 1 1 1 12 12 6 3 2 1

SUPPLY PIPING

EFFECTIVE SN

CED 69

HYDRAULIC CIRCUITS-UPPER

Date

PAGE 4

,... / ,-....___ ,..,-.,..- ,, ,..., / 7 Z •-___ 7 ,_ •-__ , Z .."---

7

7

7 /

7

7

C)?

7

y

/

10 11 12

7

7

/

13

17 15

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

12 13

PART NO.

DESCRIPTION

020584 400759 032280 032252 020770 032027 020661 032237 000291 010104 400459 400023 400022 0320 30 030555 020812 020903 401231

Elbow Clamp Hose Tube.

Connector Tube Elbow Hose Anti-Cavitation Valve 0-Ring Flange Lockwasher Bolt Tube Tube Connector Elbow Manifold

.

QTY

r--

1 2 1 1 2 1 1 1 1 3 6 12 12 1 1 1 1 1 VALVE RETURN PIPING (SB)

'1

110/ff "teerffer 74-

CED 69

HYDRAULIC CIRCUITS-UPPER

EFFECTIVE

SN Date

PAGE 5

V

7

11

,....„,, V

y

7

7

77

7

7

/

77

\

(

V ..,'--

2

7

10 —..._____

01_ 0 °\

,._

11 11

12

13

V 74

, _ -.._ -, -14

15

ITEM 1 2 3 4 5 6 7.

8 9 10 11 12 13 14 15 16 17

PART NO.

DESCRIPTION

020584 400759 032280 032252 020770 032027 020661 000291 032237 010104 400459 400023 400022 032030 400761 020874 401231

Elbow Clamp Hose Tube Connector Tube Elbow Anti-Cavitation Valve Hose 0-Ring Flange Lockwasher Bolt Tube Clamp Elbow Manifold

QTY 1 2 1 1 2 1 1 1 1 3 6 12 12 1 1 1 1

5

.

VALVE RETURN PIPING

EFFECTIVE

SN HYDRAULIC. CIRCUITS-UPPER

Date

Aw.mmwm

PAGE 5

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13

PART NO. 020313 400760 Q32058 032053 032057 032055 020836 032240 032239 020259 031831 032056 032054

DESCRIPTION Insert Cl amp Hose Tube Hose Tube Tee Hose Hose El bow Hose Hose Tube

QTY 2 8 2 1 1 2 2 1 1 1 1 1 1

/)

•■ •.‘

■% (\‘,

;;;

5

6

0."

7 11

8

13 TO BRAKE VALVE

RESERVIOR PIPING CED 69

HYDRAULIC CIRCUITS-UPPER

EFFECTIVE SN Date

PAGE 6

ITEM 1 2 3 4 5 6 7 8 9

PART NO.

DESCRIPTION

000270 000291 010105 400450 400380 401349 032242 032218 020771

Swing Motor Anti-Cavitation Valve.

0-Ring Flange Lockwasher Bolt Hose Hose Connector

QTY 1 1 2 4 8 8

1 1 2

SWING PIPING • CED 69

HYDRAULIC CIRCUITS-UPPER

EFFECTIVE

..

PAGE 7

ITEM 1 2 3 4 5 6 7 8 9 10 11 12

PART NO. 032015 400459 010053 400023 400022 032006 032115 400666 010068 032007 032016 020771

DESCRIPTION Tube Flange 0-Ring Lockwasher Bolt Tube Hose Flange 0-Ring Tube Tube Connector

QTY 1 4 2 24 24 1 2 8 4 1 1 2

BUCKET VALVE PIPING CED 69

HYDRAULIC CIRCUITS-UPPER

EFFECTIVE SN Date

PAGE 8

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PART NO.

DESCRIPTION

020771 031876 400451 400380 010105 401225 020308 400450 032002 032008 400459 010053 400023 400022 032116 032011 031874

Connector Tube Bolt Lockwasher 0-Ring Manifold Block Plug Flange Tube Tube Flange 0-Ring Lockwasher Bolt Hose Tube Tube

QTY 2 1 20 20 5 2 2 6 1 1 8 4 16 16 2 1 1

15

8

igeth Igerner CED 69

BOOM VALVE PIPING

HYDRAULIC CIRCUITS-UPPER

EFFECTIVE SN Date

PAGE 9

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART NO. 020771 032012 400451 400380 010105 401225 020308 400450 032010 032114 400022 400023 400459 010104 032009 031885

DESCRIPTION Connector Tube Bolt Lockwasher 0-Ring Manifold Block Plug Flange Tube Hose Bolt Lockwasher Flange 0-Ring Tube Tube

QTY 10

2 1 16 16 4 2 2 4 1 2 16 16 8 4.

7

0 '2\ 4

1 N 6 5

•

DIPSTICK VALVE PIPING

----11/ein-fferner CED 69

EFFECTIVE SN

HYDRAULIC CIRCUITS-UPPER

Date

.11mimmummin.

PAGE 10

ITEM 1 2 3 4 5 6 7 8 9

PART NO. 020771 020410 032014 032001 032003 032004 020198 032013 03201-7

DESCRIPTION Connector El bow Tube Tube Tube Tube Connector Tube Tube

QTY 4 2 1 1 1 1 4

........... ..

Y

•

PROPEL VALVE PIPING CED 69

HYDRAULIC CIRCUITS .--UPPER

-EFFECTIVE SN Date

ilm.". mmil

PAGE 11

ITEM 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

PART NO.

DESCRIPTION

050087 020512 032259 020814 020513 400759 032279 020584 032257 020181 032112 032278 020608 020660 000249 020905 032258 020770 020352

Heat Exchanger Elbow Tube Elbow Insert Clamp Hose Elbow Tube Tee Hose Hose Insert Reducer Check Valve Reducer Tube Connector Tee

HEAT EXCHANGER PIPING

CED 69

HYDRAULIC CIRCUITS-UPPER

EFFECTIVE

SN Date

QTY 1 1 1 1 2 8 1 3 1 1 1 1 1 1 1 1 1 1 1

i/"..mmm..

PAGE 12

ITEM 1 2 3 4 5 6 7

PART NO.

DESCRIPTION

020711 031894 031896 020207 401225 032000 031893

Connector Tube Tube Elbow Manifold Block Tube Tube

SPEED BOOST PIPING HYDRAULIC CIRCUITS-UPPER

4 1 1 4 4 1 1

EFFECTIVE SN

CED 69

QTY

Date

:77

•

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

122415 400023 400405 122417 122419 401270 401269 122420 401280 122424 400048 400094 400056 401285 122087 400059 4012)1

Bracket Lockwasher Bolt Bracket Bracket Clamp (11/4") Clamp (1") Bracket Channel Bracket Nut Nut Lockwasher Clamp Spacer Washer Bolt

1 12 12 1 2 8 21 1 1 1 2

CLAMP INSTALLATION

1A117-NP/`e1 CED 69

ITEM

1 1 1 1 1 4

EFFECTIVE SN

HYDRAULIC CIRCUITS-UPPER

Date

PAGE 14

19

16

1 PART ITEM NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

050046 050144 050166 401244 400378 401138 400056 020105 050167 050162 050159 050206 401328 401312 400048 050207 400227 020606 400405 400023 010062 401230 050158 020786 240111 050146

DESCRIPTION Magnet Assembly Reservoir Assembly Strap Webbing Nut Bolt Lockwasher Plug Pad Gasket Shaft Cover Washer Washer Nut Cover Jam Nut Plug Bolt Lockwasher 0-Ring Spring Pin Filler Cap Breather Dipstick

lil

QTY

1 1 2 2 2 2 2 2 2 1 1 1 2 2 3 1 1 1 12 12

L

1 4

1 1 1 1 EFFECTIVE

RESERVOIR ASSEMBLY

hfirta -fferne,

771/

RESERVOIR AND FILTERS

SN Date

PAGE 1

2

1

4

ITEM

1 2 3 4 5 6 7 8 9 10 11

5

6 10

1

PART NO. 452304 452305 452306 452307 452308 452309 452310 000255 452311 452312 452313

DESCRIPTION Cover (Includes Bolts) 0-Ring Head 0-Ring Spring By-pass Valve Grommet Element Connector Housing Gasket

QTY

1 1 1 1 1 4 2

1 1 1

8

11

1 9 7

L' EFFECTIVE

RESERVOIR FILTER (000237) CED 69

RESERVOIR AND FILTERS

SN Date

PAGE 2

PART ITEM NUMBER 1

4 33 24

l--- 29

- '''''"--30 (ii:-!'i) '..

• ,Y7 -‘ .,

6..1. t

f>1 .33 24

—

'21

21

35 12

f

4L

;.,

34

28'

26

24

23

38

23

31

.( 4-,, ;..-.(...-J .S

26/ -- - •

31

24 ''''.'''.

4)

•

/,

34 39 GMC 4-53 & Deutz 913 with FUNK PUMP DRIVE and Maxi-Cycle

"'"

C-128

VA,

22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

PUMP DRIVE & CLUTCH

QTY

1 Bearing (GMC) Bearing (Deutz) 1 Spacer As Req'd Shaft Nut 1 1 Shaft Lockwasher 2 Bolt (3/8-16 X 11/2 Gr 5) 14 Lockwasher (3/8") .1 Yoke 1 Key 1 Grease Zerk 1 Shaft 7 Bolt (3/4-10 X 1 3/8 Gr 5) 19 Lockwasher (3/4") 2 Bolt (4-20 X 1/2 Gr 5) 1 Inspection Plate 1 Handle 1 Lockwasher 1 Bolt (1/2-13 X 1 3/4 Gr 5) 2 Key 1 Cross Shaft 1 Clutch Housing 12 Bolt (3/8-16 X 11/4 Gr 5) GMC Metric Bolt (M10 X 30) Deutz 12 1 Seal 4 Gasket 8 Bearing 1 Drive Gear 4 Plug (1/4" NPT) 1 Housing 1 Breather 1 Reducer 1 Elbow 1 Plug (lin NPT) 1 Plug h" NPT-Magnetic) 3 Gear 3 Adapter 12 Stud 12 Nut 1 Bushing 3 0-Ring 2 Bushing

EFFECTIVE

PUMP DRIVE (240116) Summation

Phi a'NP.MP,

_

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

220127 220193 230283 450570 450222 400038 400023 450574 450254 450247 452387 451826 400382 400391 450579 450575 400056 400192 451817 450580 450582 400022 452999 450934 453019 451338 451339 020101 450588 450590 451821 020263 020105 451825 451340 450596 451341 451342 452384 010128 452389

DESCRIPTION

SN Date

PAGE 1-00

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

GMC 4-53 & Deutz 913 with

PART NUMBER 220127 220193 230283 450570 450222 400038 400023 450574 450254 450247 452387 451826 400382 400391 450579 450575 400056 400192 451817 450580 450582 400022 452999 450934 452376 451338 451339 020101 450588 450590 451821 020263 020105 451825 451340 451344 451341 451342 450597 010128

DESCRIPTION

QTY

Bearing (GMC) 1 Bearing (Deutz) 1 Spacer As Req'd Shaft Nut 1 Shaft Lockwasher 1 Bolt (3/8-16 X 1. Gr 5) 2 Lockwasher (3/8") 14 Yoke 1 Key 1 Grease Zerk 1 Shaft 1 Bolt (3/4-10 X 1 3/8 Gr 5) 7 Lockwasher (3/4") 19 Bolt (1/4-20 X h Gr 5) 2 Inspection Plate 1 Lever 1 Lockwasher ('2") 1 Bolt (1/2-13 X 1 3/4 Gr 5) 1 Key 2 Cross Shaft 1 Clutch Housing 1 12 Bolt (3/8-16 X 11/4 Gr 5) GMC Metric Bolt (M10 X 30) Deutz 12 Seal 1 4 Gasket Bearing 8 Drive Gear 1 Plug (1/4" NPT) 4 Housing 1 Breather 1 Reducer 1 Elbow 1 Plug ( 1i" NPT) 1 Plug (li" NPT-Magnetic) 1 3 Pump Gear Adapter 3 12 Stud 12 Nut 3 Bushing 3 0-Ring

FUNK PUMP DRIVE and Speed Boost

PUMP DRIVE (240083) Speed Boost C-128

PUMP DRIVE & CLUTCH

PAGE 1-00

ITEM 1 2 3 4 •5 6 7 8 9 9A 9B 9C 9D 9E

PART NUMBER 450220 220127 450570 450222_ 450223 450224 450225 450226 450227 450228 450229 450230 450231 450232

DESCRIPTION Drive Ring Pilot Bearing Hub Nut Lockwasher Hub and Back Plate Spring Drive Plate Floating Plate Sliding Sleeve Cotter Pin Link Lever Pin Sliding Sleeve Split Collar Assembly

NOTE: For complete Clutch Assembly (Items 1 & 3-17) use Part Number 230150.

QTY 1 1 1 1 1 6 1 1 1 8 8 8 1 1

10

(9E consists of the following)

a b c d

450233.

450234 450235 450236

10 10A 10B 10C 100 10E 1OF 11 12 13 14 14A 14B 14C 15 16 17

450237 450238 450239 450240 450241 450242 450243 450244 450245 450246 450247 450248 450249 450250 450255 450256 450574

Hex Nut Washer Split Collar Cap Screw Adjusting Yoke Assembly Cotter Pin Finger Lever Pin Lock Pin Spring.

Adjusting Yoke Grease Fitting Jam Nut Washer Hose Assembly Elbow Hose Straight Fitting Bolt Lockwasher Throwout Fork

14

2 4 1 2 1 4 4 4 1 1 1 1 1 1 1 1 1 1 2

1' :1)

15

7

-

0

•

t . •••"'

• ; • Ps

4. ... r

1 -1 4c•••1„ g /2(

tr

..

e3

40

2 1

EFFECTIVE

CLUTCH

SN CED 69

PUMP DRIVE & CLUTCH

Date

PAGE 1

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

PART NO. 450220 450223 450224 450225 450226 450237 450239 450238 450240 .450241 450242 450243 450227 450229 450228 450230 450231 450232 452391

DESCRIPTION Drive Ring Hub and Back Plate Spring Drive Plate Floating Plate Yoke Assembly Finger Lever Cotter Pin Pin Lock Pin Spring Yoke Sliding Sleeve Assembly Link Lever Cotter Pin Pin Sliding Sleeve Split Collar Hose Assembly

QTY 1 1 6 1 1 1 4 4 4 1 1 1 1 8 8 8 1 1 1

19

Note: Clutth Assembly 230150 does not include 452391 Hose Assembly.

CLUTCH (230150) CED 69

PUMP DRIVE & CLUTCH

EFFECTIVE Date

AT

GE2 A"umu

ITEM

PAW NLICER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

450220 400023 400038 450223 450224 450225 450226 450237 450239 450243 '450240 450241 450242 450238 453221 450228 450229 450230.

453220 ' 453217 453218 453219 453216 453214

DESCRIPTICII

•

Drive ring Lockwasher (3/8") Bolt (3/8-16 X 11/2 Cr 5) Hub and back plate Spring Drive plate Floating plate Ybke assembly Finger lever Yoke Pin Lock pin Spring Cotter pin Sliding sleeve assembly Cotter pin y.

Link Pin Sleeve Split collar Bearing Snap ring Snap ring • Pork

1

a

8 1

6 1 1 1 4

.

4 1 4 1 8 8 8 1 1 • 1 1 1

NOTE: ITEM 24 FORK, 453214 IS NOT INCLUDED IN THE ASSEMBLY NOTE: This clutch has a sealed bearing in place of the greased roller bearing

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

------- --- - - - - - -- ---------

PART NO. 300191 300190 450607 450775 452093 450702 122938 122927 122925 400158 400159 400556 400344 401190 122926 020242 030288

DESCRIPTION

QTY

Muffler Raincap Fan Hose Radiator Cap Radiator Top Baffle Side Baffle R.H. Bottom Baffle Nut Lockwasher Washer Bolt Screw Side Baffle L.H. Drain Valve Hose

1 1 1 1 1 1 1 1 1 12 12 12 12 14 1 1 1

------

--

• ice- ---- 4 1•4 ).• ,,,4;7).

------------------• V /./-1 Gt • f ' f "I" :4" 4-------CfrAtf-7:-.35:: A--": ;t' ii

•-•.; , •

.;.,.:::::7 .c.) - ,.1t.,‘ ,.--.7!...,, r-JN,...

V ?..eArtr7x., ; v. , Llf-itc...1,10::::1%,

.I 11

-3 Jo

Qt : 1 k•;'1

f.; •,.; ',...Q....,

„....;,-,li .%- /• .. ) ''''''..-,; Jr... e--,,,.-21, •

PS..

17

EFFECTIVE

ENGINE PARTS •7/AWN CED 69

182 //PP ENGINE RELATED SYSTEMS

SN Date

PAGE 1

ITEM

PART NO.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

331187 400158 400159 330411 400157 331185 401038 330961 330199 330047 400054 400013 400062 121978 400036 330206 400446 331188 331186

DESCRIPTION Shutdown Cable Nut Lockwasher Throttle Cable Bolt Bracket Control Knob Throttle Control Bracket Spring Washer Nut Nut Spacer Bolt Rod End Bolt Ewergency Stop Cable Bracket

----11/eth-fferner CED 69

QTY 1 2 2 1 2 1 1 1 1 1 1 1 3 6 3 2 1 1 1

ENGINE CONTROLS ENGINE RELATED SYSTEMS

EFFECTIVE SN Date

PAGE 2

ITEM 1 2 3 4 5 6 7 8 9 10

PART NO.

DESCRIPTION

300265 300273 300266 300182 300263 300268 452419 300264 300267 452087

Element Clamp Hood Restriction Indicator Air Cleaner Assembly Elbow Flange Gasket Mounting Band Vacuator Valve

-.-7/heeth-teerner CED 69

QTY 1 3 1 1 1 1 1 1 2 1

2

7

8

AIR CLEANER ASSEMBLY ENGINE RELATED SYSTEMS

EFFECTIVE

SN Date

PAGE 3

ITEM 1 2 3 4 5 6 7 8 9 1 10 11 12 13 14 15 16

frethafferner/ CED 69

PART NO. 020361 030147 030519 020342 020445 400808 050166 401244 400378 400549 400056 050167 020105 050148 031847 020190

DESCRIPTION Connector Hose Hose Elbow Cap Breather Strap Webbing Nut Bolt Lockwasher Rubber Pad Plug Fuel Tank Tube Elbow

2 1 1 1 1 1 2 2 2 2 2 2 1 1 1 1

EFFECTIVE

FUEL TANK ASSEMBLY ENGINE RELATED SYSTEMS

QTY

SN Date

PAGE 4

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 9

13 14 15 16 17 18 19 20 21 22 23

PART NO. 122280 122271 122269 122342 121931 122277 122272 122281 122279 401130 122278 401289 401070 401210 401176 400202 122322 122372 122373 122270 122268 121905 121906 220161 121900 451737

DESCRIPTION

QTY

Guard Door Assembly Cover Stop Cover Guard Cab Assembly Guard Guard Cotter Pin Guard Bolt (Long) Bolt (Short) Washer Cab Mount Nut Seat Assembly Pedestal Seat Lever Cover Release Assembly Collar Bearing Roller Lock Assembly

1 1 1 1 1 1 1 1 1 5 1 2 2 4 4 4 1 1 1 1 1 1 1 6 6 1

15

Afeln-leppoor CEO 69

EFFECTIVE

CAB AND WINDOW GUARDS CAB AND SHEET METAL

SN Date

PAGE

1•

SINCE IT IS IMPRACTICAL TO SHIP GLASS AS A REPLACEMENT PART FROM THE FACTORY, A DRAWING OF EACH PANEL IS SHOWN TO FACILITATE FIELD REPLACEMENT. NOTE: ALL DIMENSIONS IN INCHES. 2-11/16 RADIUS ALL CORNERS EXCEPT WHERE MARKED.

[14-1/16

INI*9-1/8

1-15/16 RADIUS 27-3/8 1-3/8 RADIUS

30-3/8

34-3/8 19-29/32

31

24

29-5/8

24-3/8

CED 69

/Kethfferifer

EFFECTIVE

WINDOW GLASS

CAB AND SHEET METAL

SN Date

PAGE 2

PART ITEM NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12

Machinery Housing Rear Cover Plate Door L.H. Top Machinery. Housing L.H. Machinery Housing Center Machinery Housing R.H. Door R.H. Side Door Rear End Lower Door Rear End Upper Door Rear R.H. Door Rear L.H. Catch Latch

122365 122370 122257 122367 122368 122366 122369 122261 122260 122259 122258 122478

MACHINERY HOUSING

m"'°°•••17/AfPin CED 69

yffei WO,

QTY 1 1 1 1 1 1 1 2 2 1 1 2

EFFECTIVE SN

CAB AND SHEET METAL

Date

PAGE 3

ITEM 1 2 3 4 5

PART NO. 170042 401246 400920 401245 170041

DESCRIPTION Plate Bolt Lockwasher Bolt Counterweight

AfEhiPierPnehr, €9

QTY 1 2 4 2 .1

EFFECTIVE

COUNTERWEIGHT CAB & SHEET METAL

SN Date

900120

900121

900150 900151

900124

afePnEr CEO 69

900122

DECALS CAB. AND SHEET METAL

EFFECTIVE SN Date

PAGE 5

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .

.

PART NUMBER 240065 400756 401294.

400015 010109 000270 400055 400056 400212 401187 400098 240073 122249 200034 240041 400426 401347 122951 122884

DESCRIPTION

6

QTY

Swing Gearbox Washer Bolt (3/4-10 X 214 Gr 8) Grease Fitting 0-Ring Swing Motor Nut Lockwasher Stud Bolt (3/4-16 X 61/2 Gr 5) Washer Wedge Block Cone Washer Swing Pinion Retainer Bolt (5/8-18 X 111 Gr 5) Bolt (3/4-16 X 5 Gr 8) Front Wedge Assembly Rear Wedge Assembly

4 4 2 1

3 2

.

4 4 4 2 .4 4 2 1 1 2 2 2 2

10

12

18

EFFECTIVE

SWING GEARBOX CEO 69

SWING SYSTEM

SN Date

PAGE 1

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PART NUMBER 400038 400023 400015 450471 450646 400307 450692 450466 450467 450468 400022 450665 450648 450649 450650 400461 400056 450744 450477 450476• 450661

DESCRIPTION Bolt Lockwasher Grease Fitting Output Shaft Cover Gasket Bolt End Plate Shim (.005") Shim (.007") Shim (.020") Bolt Intermediate Shaft Cover Shim (.005") Shim (.007") Shim (.020") Bolt Lockwasher Dowel Pin Bearing Cone Bearing Cup Cover

--7/AtethAlee.rner CED 69

QTY ITEM 18 10 19 14 20 2 21 1 22.

1 23 2 24 1 25 2 26 2 27 1 28 4 29 1 30 2 31 2 32 1 33 17 34 22 35 2 1 36 37 1 1.

38

.

PART NUMBER 450645 450735 450664 450736 450652 220035 450473 450745 450464 450461 450475 450474 450746 450651 450465 450478 450479 450462 020105 450743 450795

DESCRIPTION Gasket Bearing Input Shaft Bearing Oil Seal Bearing Cup Bearing Cone Grease Retainer Intermediate Gear Intermediate Shaft Bearing Cone Bearing Cup Grease Retainer Snap Ring Output Gear Bearing Cup Bearing Cone Output Shaft Plug Breather Plug

QTY ITEM 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1

39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

PART NUMBER 450660 450791 450640 450642 450643 450653 450691 450747 450662 450794 450647 450469 450470 450463 450460 450793 020138 450796 450797 450924

DESCRIPTION Housing Gasket Brake Assembly Brake lining Brake Actuator Boot Yoke Clevis Pin Brake Housing Bolt Gasket Oil Seal 0-Ring Sleeve Bearing Cap Plug Elbow Dipstick Tube Dipstick Spring

QTY 1 1 1 2 1 1 1 1 1 5 1 1 1 1 1 1 1 1 1 2

EFFECTIVE

SWING GEAR BOX (240065) SN

SWING SYSTEM

Date

/ 1772

01111 01 01 1 11 0101111 11E 111

ITEM 1 2 3 4 5 6 7 8

PART NUMBER

DESCRIPTION

QTY

220104 130087 400756 400737 400874 400384 400314 401243

Swing Bearing Turntable Casting Lockwasher Bolt Dowel Pin Washer Bolt Bolt

1 1 72 36 2 4 4 36

..1

""

......

s's

„

• ..

6.

4W...”.' ;;;; -------—;'

SWING BEARING AND TURNTABLE

"Phi AvareMer CEO 69

1

EFFECTIVE SN

SWING SYSTEM

Date

PAGE 3

SWING GEAR BOX BRAKE SHAFT

10

ITEM

PART NUMBER

1 2 3 4 5 6 7 8 9 10

230087 400050 400051 400137 230091 230175 400024 400026 230174 400121

.

DESCRIPTION Mounting Bracket Nut Lockwasher Bolt Lever Assembly Cable Assembly Clevis Pin Cotter Pin Adapter Jam Nut

Afrin-ffivwer 7769-7/1

QTY 1 4 4 4 1 1 1 1 1 1

SWING BRAKE SYSTEM SWING SYSTEM

PAGE 4

ITEM

PART

1 2 3

310019 310016 400405 121957 400023 400062 122121 122124 310023

5 6 7 8 9

7/4+27h7 Al0PPAPLei.

•1'1•1 CED 69 1

DESCRIPTION Battery Cable Battery Cable Bolt Angle Lockwasher ' Nut Battery Hold-Down Rod Battery

ELECTRICAL SYSTEM BATTERY INSTALLATION

QTY 1 1 2 1 4.

4 1 2 1

EFFECTIVE SN Date

PAGE 1

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PART NO. 320321 320077 320442 400745 320296 320041 320295 320294 320049 320074 320434 320458 320017 320015 320454

DESCRIPTION Heater Switch Toggle Switch Cigarette Lighter Vibration Mount Fuel Gauge Ammeter Water Temperature Gauge Oil Pressure Gauge Warning Light Warning Light Ignition Switch Hourmeter Vibration Mount Starter Button Horn Button

QTY 1 3 1 4 1 1 1 1 1 1 1 1 1 1 1

10

INSTRUMENT PANEL CED 69

ELECTRICAL SYSTEM

EFFECTIVE SN

J/4.mm•m...

Date

PAGE 2

To Ground Ote

To Fuel Level Sender

Starter Button

ti

0

To Reservoir Oil Pressure Sender

#12 Red

Heater Switch Dome Light Switch

To Water Temperature Sender

To Starter Solenoid

#16 Brown

I #8 Black 0

To Starter Relay

#12 White

To Reservoir Oil Temperature Sender

#14 Blue—[ To Oil Pressure Sender #14 Green

#12 Red

Floodlight Switches

To Floodlights

#10 Black

Hourmeter

To Voltage Pressure Regulator Switch

1

To

#8 Red

e/ 4!t s llu 2

N

#12 Blue

O

0

O

0

6 Gr

Circuit Breakers )

#10 Yellow Ignition Switch

Fuel Gauge

#14 Brown #12 Red—

Cigarette Lighter

To Horn

Ammeter

Brown

Filter Pressure Warning Light Water Temperature Gauge Reservoir Oil Temperature Warning Light Oil Pressure Gauge

, *in

CED . 69

WIRING HARNESS INSTALLATION

akrne,

EFFECTIVE .

ELECTRICAL SYSTEM

.SN . Date

PAGE 4

ITEM

NUM-61R

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

401203 400322 400056 400094 330913 220091 331108 400005 330931 330711 400038 400023 400048 220159 400848 330922 330754 401076 220146 330935 330936 400006 330923 400025 220108 400026 400024 400050 330761 330762 210316 401114 33 0921 330924 401036 330918 401375 400287 70033 7 331215 331216 320036 401397 401398

30 31 32 33 34 35 36 37 38 39 40 41

.

DESCRIPTION

Bolt 4 Washer 4 Lockwasher 4 Nut 4 Pedal 2 Bearing 4 Tube 1 Grease Fitting 4 Lever 2 Knob 2 Bolt 4 Lockwasher 4 Nut 4 Bearing 4 Setscrew 8 1 Lever 2 Block Bolt 8 Bearing 8 Control Handle R.H. 1 Control Handle L.H. 1 4 Setscrew Tube 1 2 Clevis 2 Bushing 2 Cotter Pin 2 Pin Jam Nut 4 1 Propel Cable L.H. 1 Propel Cable R.H. 1 Shaft 1 Screw Lever 1 1 Tube 4 Grease Fitting 1 Tube 2 Clevis 2 Pin 2 Boot 1 Handle R.H. 1 Handle L.H. Horn. Button 1 Spacer (16 ga.)

As Req'd Spacer (13 ga.)

As Req'd

tin• 'OAriffP,

V1/ 4 E CED 69

QTY

EFFECTIVE

LEVERS AND PEDALS CONTROLS

SN Date

PAGE 1

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

401203 400322 400056 400094 330913 220091 331108 400005 330931 330711 400038 400023 400048 220159 400848 330922 330754 401076 220146 330935 330936 400006 330923 400025 220108 400026 400024 400050 330735 210316 401114 330921 330924 401036 330918

Bolt Washer Lockwasher Nut Pedal Bearing Tube Grease Fitting Lever Knob Bolt Lockwasher Nut Bearing Setscrew Lever Block Bolt Bolt Control Handle R.H. Control Handle L.H. Setscrew Tube Clevis Bushing Cotter Pin Pin Jam Nut Propel Cable Shaft Screw Lever Tube Grease Fitting Tube

QTY

10

17 1819 22

19

3

1

25

28 29

32

27 26

30

'''''llhfehraleterffer CED 69

LEVERS AND PEDALS (SB) CONTROLS

EFFECTIVE SN Date

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

PART NUMBER

DESCRIPTION

210316 400560 330994 331191 331192 330939 401114 331189 331190 220157 220158 400121 401198 220106 331018 220091 331001 401165 331006 331005 400702 331048 331017 400005 400048 400023 400138 401197 400038 330998 210294 400157 400159 400158 401395 401396

1 Shaft 2 Bolt 1 Console 1 Cover R.H. Cover L.H. 1 Shaft Cover 2 Screw 14 1 Cover R.H. 1 Cover L.H. 6 Ball Joint Ball Joint 4 10 Jam Nut Control Rod 1 2 Bearing 1 Lever 6 Bearing Tube 1 2 Control Rod Lever 1 2 Lever 3 Pin 1 Lever 1 Lever 4 Grease Fitting 14 Nut T2 Lockwasher 4 Washer 1 Control Rod Bolt 4 1 Tube Shaft 1 1 Bolt Lockwasher 1 1 Nut As Req'd Spacer(13ga.)

As Req'd Spacer(lOga.)

QTY

33 ••"••" CED 69

/Web/ miePrn Pr

EFFECTIVE

UPPER CONTROLS ASSEMBLY CONTROLS

SN Date

PAGE 2

PART NUMBER

ITEM

DESCRIPTION

210316 Shaft 400560 Bolt Console 330994 330940 . Cover R.H. 330941' Cover L.H. Shaft Cover 5 330939 Screw 6 401114 Console Cover - R. H. 330946 7 Console Cover L. H. 330947 220157 Ball Joint 8 .220158 - • Ball Joint 9 Jag' Nut • 10 • 400121 401196:,.- Control Rod 11: 12 220106' Bearing Control Rod •13 401198 Bearing 14 • 220091 15 331015 Lever Control Rod 401165 16 331006 Lever 17 331005 Lever 18 400702 Pin 19 331048 Lever 20 21 '331017 Lever 22 Grease Fitting 400005 Nut 23 400048 Lockwasher 400023 24 .25• 400138 .Washer.

Control 'Rod 26 401197 400038.. Bolt • 27 Lever'' • 28 • 331016 210294. Shaft .

29 30 400159 . Lockwasher Bolt .31 400157 Nut 400158 32 33 Lever 331018 1 2 3.

4

-

.

QTY 1 1 1 1 1 2.

14

<'

1 1 8 4 12 1 2 1 10 1 3 1 2 3 1 1 4 14 12 4

9

8 ,11 10 12

15

eV9 14

16 10

33

1

9 10

14

4 1 1 1 1 1 1

8 12 7 7

7 9

7

,5 26 n 23 10 Id n 24 10 ,c

16

31

<'27—e 22

ehi CED69

UPPER CONTROLS ASSEMBLY (SB)

EFFECTIVE SN

CONTROLS

Date

......m""I A PAGE 2

PART

6

1

13 12 \ 1,11 ()(° \ ®

4 3 I /6 9 2 \,,, 4/ / \ 1•L'-i' 0 zzazrzz:,_ I

10 N.0 1

2

ITEM

NUMBER

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

220158 400121 401375 400287 400027 400050 330762 331082 330761 400038 400138 400023 400048 331078 331081

Ball Joint Jam Nut. Clevis Pin Cotter Pin Jam Pin Propel Cable Control Rod Propel Cable Bolt Washer Lockwasher Nut Control Rod Control Rod

QTY 8 8 2 2 2 2 1 2 1 8 8 8 8 1 1

@

—„i

I

15

•

•

=

LOWER CONTROL ASSEMBLY " • • • 7401li CED 69

4#PPnee CONTROLS

EFFECTIVE SN Date

/477777

ITEM

PART NUMBER

DESCRIPTION

QTY

ITEM

PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

400287 400027 400286 400121 220158 331033 331028 331021 220091 331026 400005 400038 400138 400023 400048 331027

Pin Cotter Pin Clevis Jam Nut Ball Joint Control Rod Control Rod Support Bearing Lever Grease Fitting Bolt Washer Lockwasher Nut Lever

2 4 2 16 12 2 2 2 4 1 2 12 12 12 12 1

17 18 19 20 21 22 23 24 25 26 27 28 29 30

401203 400056 400094 331032 331029 220108 400024 400122 331031 331030 210316 400159 400157 400158

Bolt Lockwasher Nut Control Rod Control Rod Bushing Pin Clevis Control Rod Control Rod Shaft Lockwasher Bolt Nut

4 4 4 1 1 2 2 2 1 1 1 1 1 1 1

8 18 19

16 5

4

4 22 / °Qe ---- 23 22

21 25

26 4 29

LOWER CONTROLS ASSEMBLY (SB)

c4S

EFFECTIVE

SN

CEO 69

CONTROLS

Date

AGE 3 P

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4 5 6 7

320393 400218 400483 401265 400101 031988 031987

Heater Bolt Lockwasher Nut Clamp Hose Hose

QTY 1 4 4 4 4 1 1

EFFECTIVE

HEATER ASSEMBLY SN Date

/4"1"wwww"

PAGE 1

ITEM

PART NUMBER

DESCRIPTION

1 2 3 4

320338 401216 400435 400437

Fan Bolt Lockwasher Nut

DEFROSTER FAN "--67/hreirkrAffeArtier 'CED 69

QTY 1 4 4 4

EFFECTIVE

PAGE 2

ITEM 1 2 3 4 5 6

HYDRA-SWIVEL (040549) UNDERCARRIAGE CED 69

PART NO. 040544 010036 040989 040991 400005 400192

DESCRIPTION Body 0-Ring Housing Cap Grease Fitting Bolt

QTY 1 7 1 1 1 3

EFFECTIVE

PAGE 1

PART ITEM NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

802008 802345 400097 400329 802180 802181 400094 400056 802183 400198 400326 400183 400518 800209 800212 800210 801961

DESCRIPTION Carbody Skid Plate Lockwasher Bolt Rear Spacer - L.H. Rear Spacer - R.H. Nut Lockwasher End Cap Bolt Bolt Cotter Pin Washer Upper Spacer Hinge Pin Lower Spacer End Cap

QTY 1 2 20 8 1 1 8 8 2 12 8 4 4 4 4 2 2

CARBODY AND SKID PLATE Phi' CED 69

PM,' UNDERCARRIAGE

PAGE 2

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

PART NUMBER 032087 032088 020585 020871 032085 020362 802184 802185 400097 400853 010109 400212 400322 400056 400055 000245 010054 400697 400461 401301 032092 032093 400686 032090 032091 400023 400036 020471

DESCRIPTION Brake Hose Drain Hose Reducer Tee Propel Hose Connector Motor Guard Motor Guard Lockwasher Bolt 0-Ring Stud Washer Lockwasher Nut Propel Motor 0-Ring Flange Bolt Clamp Propel Tube Propel Tube Clamp Propel Tube Propel Tube Lockwasher Bolt Connector

QTY

2 2 2 2 4 2 1 1 8 8 2 4 4 20 4 2 4 8 16 4

L.H. R.H.

L.H. R.H.

1 4 1 1 8 8 2

L.H. R.H.

I

,/

. ili

..„ , ...,.

' ..1- ...N....

-.." --.

_, .... w-.:',., ,.,.

V ,1 '‘,..)•.<

`,..

■■■

..."---;;

(N

■

..

'''■ ■ ∎

,.. . .■

. .....

.

'''',..

■

,

•,, ......

.

, ,, ■ ■ ,.._ ,....",,,,....

-- .'771 . -". ■ .. , .

■ „,..... s........

9.

----

"...., N.

•••••

‘'■

nr

/ y 7 V7 A eziv,i51`7) /

V

4 V j/ / . ' z if / 1 9 18 13 .9

,‹*-•

77 4.

‘‘,■

10 11 12

20 0V

19 13

r/'

V

11

16

15

\ 13 14

6 18

1

17

21 22

9 PROPEL PIPING

""'''1 CED 6 9

∎

....... .....,

.....::."V- ■ ■''''`■■■, , .....

.....

•

9 12;r21--, ..........'0 A/ 24■.....,.....i

1

■ ■ ,.

■ '■

"... N,..1 ..,--"-". . ,'. ' , ...f''',: -' `•■ •:.c....

■

/ A ;

itriV(0

S. 4,

■■

, ■ ,....

(#0./ii4gAVYMP UNDERCARRIAGE

EFFECTIVE SN Date

/7"Na AG Effil4

ITEM 1 2 3 4 5 6 7 8 9 10 11 12

PART NUMBER 801613 400302 400673 802196 802197 802092 400423 400398 400445 400094 400056 400356 802377

DESCRIPTION Slider Lockwasher Nut Side Frame R.H. Side Frame L.H. Roller Assembly Lockwasher Bolt Bolt Nut Lockwasher Bolt Cover Plate

QTY 6 12 12 8 32 32 12 6 12 12 2

11

12

EFFECTIVE

SIDE FRAME •11'7(#91,1 4gP.MAF/P CED 69

UNDERCARRIAGE

SN Date

PAGE 5

>-

Nd'NN N

r--

DESCR IPTI ON

cr

•r-

0 L.) S-

cU 3 O U. cr) 0 0

• Q) co O QJ 1 U

LU CC CO <

O

S.

L.) O -o

Cl 0 rV) •--1 0- LA.1 CC

CO 01 01 GI- N. CV CY) to 01 to r- 4.0 r C~ OOO0001COOCOtc1N C\I O r r-• r 0 CD CD N .

• CN.I 0 CD CD CD N C\ I CD CD CD CO CO CO GI" CD CD CO

r (NJ V) LO 10

1, 00 0)

ITEM 1 2, 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

PART NUMBER

DESCRIPTION

400461 400056 400695 400328 802271 801823 801824 801825 802340 010214 802242 010171 400015 801615 802243 010215 010216 802245 401333 802244 010172 802257

Bolt Lockwasher Bolt Lockwasher Thrust Plate Shim Shim Shim Recoil Block Seal Cap 0-Ring Grease Fitting Ball Check Assembly Rod Leather Back-up Seal Spacer Bearing Retaining Ring Ram Spacer Packing Cup Cylinder Body

QTY 4 4 2 2 1 As Req'd As * Req'd As Req'd 1 1 1 1 1 1 1 1 1 1 1 1 1 1

18

EFFECTIVE

RECOIL CYLINDER ASSEMBLY

Immamm7(#0/./PlePrne, CED 69

UNDERCARRIAGE

SN Date

PAGE 7

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

18 19

PART NUMBER 400015 801646 802243 010214 400106 802379 802242 010171 802339 010215 010216 802245 802257 401360 010217 802244 401333 041182 010256

DESCRIPTION Grease Fitting Check Valve Rod Seal Bolt (3/8-16 X 1 114 Gr 5) Gland Nut End Cap 0-Ring Backup Ring Backup Washer Seal Spacer Cylinder Body Snap Ring Seal Ram Spacer Snap Ring Retainer Wear Ru49

• ffeh ► mate.rner

QTY 1 1 1 1 6 1 1 1• 1 1 1 1 1 1 1 1 1

RECOIL CYLINDER ASSEMBLY (802246) UNDERCARRIAGE

EFFECTIVE

SN Date

j/

i■ ■

milmi ms

ITEM

PART NUMBER

DESCRIPTION

QTY

•

1 2 3 4 5 6

•.

2

52:v

4■

/3

== = ;-__----------_ ...7-:..z.-.......

-;':,::":.. -------' 1. .......7.-,

•- .#- V Fl

--------_

--------,::::-7-

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

-.:,-- ...*. l.....-..".

-----::::::-: ------:-

..

----'''''''=.-- -‹

........

25

•

•-:--_

-,

. . .. ... _ -...-„,_..,... „;,::.. . . . . ......

24

.

:-

23

.

..__ -.., , - _ „,, ,,

., ,- ,..,.. r i--..." ..: - r

17 18

19 20

1

13 12

e

7

7

7 7

z

7

14

400067 400126 802293 020163 050169 240099 240100 010060 801405 801417 401153 220155 220156 010161 802096 801424 801393 010128 801406 400355 400441 400328 400198 020739 801388 801428 801429 801449 801450

Bolt Nut Lock Plate Elbow Breather Propel Gear Box L.H. Propel Gear Box R.H. 0-Ring Bearing Housing Lock Plate Bolt Bearing Cup Bearing Cone Seal Sprocket Spacer Tumbler Shaft 0-Ring Thrust Collar Lockwasher Bolt Lockwasher Bolt Plug Bearing Adjuster Shim (.005) Shim (.002) Shim (16 Ga.) Shim (22 Ga.)

2 2 2 1 1 3 5 2 2 4 1 1 1 1 6 6 6 6 2 1 As

IAA:ss

11

15

----/A/isin-ffprnzsP CED 69

PROPEL GEAR BOX AND TUMBLER UNDERCARRIAGE

EFFECTIVE

SN Date

PAGE 8

PART ITEM NUMBER DESCRIPTION 451636 451638 451637 451639 451640 451642 451643 451644 451641 451645 451193 451646 451647 451648 13 451650 14 451649 15 451651 16 451652 451653 451654 17 451655 18 451656 19 451657 20 451658 21 451659 22 451660 23 451661 24 451662 25 451663 26 451664 27 451665 28 451666 29 451667 451668 30 451669 451670 451671 451672 31 451673 32 451674 33 451675 34 451676 35 451677 36 451678 37 451679 38 451680 39 451681 40 451682 41 451698 42 451699 43 451700 44 451701 45 451702 46

1 2 3 4 5 . 6 7 8 9 10 11 12

1 Housing Cover 1 0-Ring 1 Cover 47 21 Lockwasher 17 Bolt 1 Cover 1 0-Ring 1 Cover 2 Plug 1 0-Ring.

2 Dowel 22 Bolt ( 1 1/2 In. Long) 6 Bolt ( 1 1/4 In. Long) 33 Lockwasher 2 Plug 1 Gasket As Req'd Shim (.005) As Req'd Shim (.007) As Req'd Shim (.020) 1 Bearing Cup 1 Bearing Cone 1 Gear 1 Bearing Cone 1 Bearing Cup 1 Housing.

1 Bearing Cup 1 Bearing Cone 1 Shaft 1 Gear 1 Bearing Cone 1 Bearing Cup As Req'd Shim (.005) As Req'd Shim (.007) As Req'd 47 Shim (.020) As Req'd 48 Shim (.005) As Req'd 49 Shim (.007) As Req'd 50 Shim (.020) 2 Bearing Cup 51 2 Bearing Cone 52 1 Shaft 53 1 Gear 54 1 Adapter Plate 55 1 0-Ring 56 2 Bearing 57 1 Shaft 58 1 Seal 59 1 Plate 60 1 Gasket 61 1 Stud 62 1 Lockwasher 63 1 Nut 64 1 Seal 65 1 66 Cap

floin-leppoPr CED 69

48

QTY

N,

49

50

5 4

51 5n

4257:1;-%:,>52 ;2 •

54

NN

4!

NN N

64

N

2

65

/

42

6

!

9 1 1

, 39

63

10

66

1r 13

1 Nj

4 8

55

410

46 --45' i// 44 / 43

5

—6

5 4

— 9

11 /

12 13

1

37

N

60

K'N]

30

56

N

38--.._

29

58 59

28

56 41 40

27 26\

32

4r-4141$

337 451697 451696 451693 451694 451695 451692 451691 451690 451689 451683 450924 451209 451684 451685 451686 451687 451688 450747 450748 451219

Bolt Cover Backup Ring 0-Ring Piston Valve Housing 0-Ring Nut Spring Retainer Brake Lining Spring Brake Actuator Brake Assembly Brake Housing Rod Sleeve Spring Pin Cotter Pin Bolt

4 1 2 2 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 5

PROPEL GEAR BOX UNDERCARRIAGE

4 14 Now01 111 0 34 32 24

31

19

111 1 1 1 1 1 1 111 1 111111

23

20 N

I

21

22

EFFECTIVE

SN Date

PAGE 9

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PART NO. 452326 452342 452328 452329 452330 452343 452344 452345 452334 452335 452336 452347 452348 452349 452350

DESCRIPTION Lock Ring End Collar Seal Seal Ring Bolt Lockplate Bushing Assembly 0-Ring Plug 0-Ring 0-Ring Shaft Key Lock End Collar Roller

QTY 2 1 4 4 12 6 2 2 1 1 2 1 1 1 1

15

EFFECTIVE

ROLLER ASSEMBLY (802092) UNDERCARRIAGE C.FD 69

SN Date

24-2632 August 2, 1976

/4777

PART ITEM

NUMBER

1

801826 801827 801828 220156 220155 010176 801847 400423 400426 010175 010193 801846 802097 802283

2 3 4 5 6 7 8 9 10 11 12

DESCRIPTION Shim (.002") Shim (.005") Shim (.0149") Bearing Cone Bearing Cup 0-Ring Bearing Retainer Lockwasher Bolt Seal 0-Ring Seal Retainer Idler Idler Shaft

IDLER ASSEMBLY ••••°'"77/A471//41:ernter CED 69

UNDERCARRIAGE

QTY As Req'd As Req'd As Req'd 2 2 2 2 12 12 2 2 2

EFFECTIVE

SN Date

• PAGE 11

ITEM 1 2 3 4

4A 5 6 7

7A 8

9 10

PART NUMBER 452393 452397 452398

452402 452395 452400 452401

452399 452394

452403 452396 452404 452405

.

DESCRIPTION Master Pin* Spacer Washer Track Link Master Track Link Track Shoe Bolt Track Link -Master Track Link Bushing Master Bushing* Nut Track Pin

QTY

,

-

:*

1 4 8 1 1 1 4 1 1 1 1 4 2

* Only one (1) master link is used on each track assembly.

EFFECTIVE

TRACK ASSEMBLY (802090) SN C-12B

UNDERCARRIAGE.

Date

PAGE 12-0 0 .

SERIAL NO.

Parts Manual for Series C12B Hydraulic Backhoes

NOTE: The parts pages are intended for use in ordering parts, and therefore do not always depict the correct way to assemble components.

CONSTRUCTION EQUIPMENT DIVISION WAUKESHA, WISCONSIN 53186

ABOUT THIS MANUAL

This manual incorporates a new simplified page numbering system. The book is divided into major categories or sections, each of which is separated by an index tab sheet. Pages are numbered consecutively within each section. For example, let's say the section entitled "Pumps and Motors" contains the following pages: Page Page Page Page

1 2 3 4

Dipstick or Boom Pump Swing and Boost Pump Swing Motor Propel Motor

Should we add a pump to the machine at a future date, it would simply become "Page 5".

If we change one of the existing pages, the new page would have the same number. For example, if we change the vendor on the swing motor, a new page would be prepared. This new page would also be "Page 3". In other words, each Master Parts Manual would then contain two page 3's.

The effective date and serial number block will be your key to determine which page to use for a particular machine.

Each page includes the name of the major category it is a part of. This is found below the title of the page itself, and will enable you to file newly released pages in their proper location in your Master Parts Manual.

As in the past, customer manuals will be individually assembled, and contain only those pages which apply to his particular machine.

CED 69

.

INSTRUCTIONS FOR ORDERING REPLACEMENT PARTS

To assure prompt and accurate service, include the following data with each parts order:

1.

2.

3.

4.

5.

6.

Purchase Order Number Model and Serial Number of Machine Parts Numbers Part Descriptions Quantity of each part desired Method of transportation

Confirm all telephone and telegraph orders in writing. Be sure these orders are marked "Confirmation", to avoid duplication of orders.

INSPECTION OF SHIPMENTS

Carefully inspect all shipments upon arrival. In the event of loss or damage, do not accept the shipment until the transportation company either makes a notation on the freight bill, or gives you an inspection report covering said damage or loss. In the event of concealed damage or loss, notify the carrier at once (within 20 days) requesting that an inspection be made and damage or loss be acknowledged.

USE ONLY GENUINE HEIN-WERNER PARTS FOR MAXIMUM PERFORMANCE

CED 69

ii

WHERE TO ORDER PARTS

Contact the Hein-Werner dealer in your area when placing parts orders. Hein-Werner Dealers are conveniently located throughout the United States and Canada. These Dealers maintain a stock of genuine Hein-Werner replacement parts so that orders are filled as quickly as possible. To aid the dealer in processing your order promptly and correctly, you should supply the following information:

1.

2.

3.

4.

5.

Model and Serial Number of your Machine.

Part Numbers of items desired Part Descriptions Quantity of each part desired Method of transportation INSPECTION OF SHIPMENTS

Carefully inspect all shipments upon arrival. In the event of loss or damage, do not accept the shipment until the transportation company either makes a notation on the freight bill, or gives you an inspection report covering said damage or loss. In the event of concealed damage or loss, notify the carrier at once (within 20 days) requesting that an inspection be made and damage or loss be acknowledged.

USE ONLY GENUINE HEIN-WERNER PARTS FOR MAXIMUM PERFORMANCE

CED 69

ii