ISO-Style (used Internationally) Safety Decals inside the ROPS/FOPS Safety alert: Always follow “Mandatory Safety Shutdown Procedure” in Operator’s Manual. 1 – Lower equipment to ground. 2 – Reduce throttle, stop engine. 3 – Apply parking brake; remove key. 4 – Check safety interlocks.
242568 – Located behind operator’s left shoulder Safety alert: Read Operator’s Manual and all safety signs before using machine. The owner is responsible to ensure all users are instructed on safe use and maintenance.
242246 – Located on right instrument panel Safety alert: A – Check machine before operating; Service per A Operator’s Manual. Contact dealer (or manufacturer) for information and service parts. A B B – Maintain 3-point contact during entry and exit. E B C – Inspect work area. Avoid all hazards. Look in direction of C D travel. Keep children and F C bystanders away. D – Start and operate machine only E from seat. G D E – Keep away from power lines; F avoid contact. 242590 – F – Wear any needed Personal Located on left Protective Equipment. Do not instrument wear loose clothing while panel operating or servicing machine. 242590
A
A
B
242408 – Located on operator’s lower left side
C
A – Forward tip hazard: Fasten seat belt. Carry load low. Do not exceed Rated Operating Load. B – Side tip hazard: Avoid steep slopes and high speed turns. Travel up and down slopes with heavy end uphill. C – Crush hazard: Keep out from under lift arm unless lift arm is supported. D – Crush hazard: Keep hands, feet and body inside cab when operating.
B
C
D
D 242284 – Located on operator’s lower right side
14
50950106/K0521
