1 minute read
TORQUE SPECIFICATIONS
from Gehl R190 R190 (EU) R190 X-Series R220 R220 (EU) R220 X-Series R260 R260 (EU) R260 X-Series Skid-Ste
Use these torque values when tightening hardware (excluding locknuts, and selftapping, thread-forming, and sheet metal screws) unless otherwise specified.
*All torque values are in ft.-lbs., except those marked with an *, which are in in.-lbs. For metric torque value (N·m), multiply ft.-lbs. value by 1.355, or the in.-lbs. value by 0.113.
Never exceed rated operating load.
Wrong
Never carry riders.
Keep bystanders away from work area.
Wrong
Wrong
Never leave loader with engine running or with lift arm up. To park, engage parking brake and put attachment flat on the ground.
Always carry attachment as low as possible. Do not travel or turn with the lift arm raised. Load, unload and turn on flat level surface.
Wrong
Never modify equipment.
Use only attachments approved for model loader.
