Gehl Mower Conditioners 2140 2170 SERVICE PARTS MANUAL(906305) - PDF DOWNLOAD

Form No.

906305 Replaces 904986

2140/2170

.J

I

w

SERVICE PARTS MANUAL

l!J

Introduction When ordering service parts, specify the correct part number, full description, quantity required, the unit model number and serial number.

The Mower Conditioner model and serial number is on a plate located on the left side of the Swing Frame at the Steering Post Pivot. "Right" and "left" are deter­ mined from a position standing behind the Mower Con­ ditioner. From this position, the Drawbar and Positioner are on the "left" side.

GEHLe Company reserves the right to make changes or improvements in the design or construction of any part of the unit without incurring the obligation to install such changes on any previously delivered units.

NOTE: On original tire replacement, company policy prohibits the sale of replacement tires for all GEHL machinery. Replacement Wheel Sets are available and tire size information is called=out with the Wheel Sets to facilitate replacement tire selection. ALL REPLACEMENT TIRES MUST BE PURCHASED LOCALL Y. Grease fittings and common attaching hardware, such as Cotter Pins, Set Screws, Woodruff Keys, Screws, Nuts, etc., are included in the parts lists, indented below the part it is (they are) associated with, but NOT illustrated, except where a particular routing or special fastening arrangement MUST be maintained. The hard­ ware listed is for mounting purposes and is NOT in­ cluded when the part is ordered for replacement. Refer to the abbreviations table, located on this page or on the inside back cover of this manual, for the various fastener descriptions. For the part number of related fasteners, refer to the Attaching Hardware Table on the inside back cover of this manual. Standard attaching hardware torque values are also provided on the inside back cover.

Unless otherwise specified, all Cap Screws or Bolts are Grade 5, cadmium or zinc plated; Hexagon Nuts for Grade 5 Screws or Bolts are Grade B; Hexagon Nuts for other Screws or Bolts arc Grade A.

NOTE: The following abbreviations are used herein: AR .. - As Required ASSY - Assembly BRG .. - Bearing CB - Carriage Bolt CS - Cap Screw (Hexagon Head) DIA - Diameter DEG .. - Degree FCS .. - Flanged Cap Screw (Hexagon) FHMS - Flat Head Machine Screw FHSCS - Flat Head Socket Cap Screw

FLN . - Flanged Lock Nut (Hexagon) FT. . - Foot or Feet FLS . - Flanged Lock Screw (Hexagon) GR . - Grade I.D. .. - Inside Diameter HVY . - Heavy HYD .. - Hydraulic INCL .. - Includes 'INCLD . - Included INT . - Internal JIC . - Joint Industry Conference IN. . -JamNut L .. . - Lock (Washer) LH . - Left Hand LN . - Lock Nut (Hexagon) LT. . - Left M. . - Metric MMlmm - Millimeter N .. - Nut (Hexagon) NF .. · . - National Fine NILN · . - Nylon Insert Lock Nut NPT. · . - National Pipe Thread NPTF · . - National Pipe Thread Fine O.D. · - Outside Diameter OH · - Oval Head P .. · - Plain (Washer) PTO · - Power Take Off RED . - Reducer RH ... - Right Hand RHMS . - Round Head Machine Screw RHSQNB - Round Head Square Neck Bolt RPM .. - Revolutions Per Minute RT .. . - Right SAE ... - Society of Automotive Engineers SBHS . - Socket Butt Head Screw SHCS .. - Socket Head Cap Screw SHSS .. - Socket Head Set Screw SHSS-SL - Socket Head Set Screw-Self Locking SN . . . . - Serial Number or Slotted Nut SPKT .

Sprocket SQ . . . . - Square SQHSS . - Square Head Set Screw ST .. . - Street T . . . . . - Tooth or Teeth THMS . - Truss Head Machine Screw WDRF . - Woodruff WLDMT - Weldment WLN .. - Whiz-lock Nut WI . . . . - With W/O . . . - Without WHCS . - Washer Head Cap Screw # . . . . . - Number

TABLE OF CONTENTS Page Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Front Cover Table Of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Decal Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Tongue (After SN11700-2140 & SN22200-2170) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Tongue (Before SN1170 1-2140 & SN22201-2170) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Trailer Frame, Leg & Pusharm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7 Pusharm & Hydraulics(After SN11700-2140 & SN22200-2170) . . . . . . . . . . . . . .8 Pusharm & Hydraulics(Before SN11701-2140 & SN22201-2170) . . . . . . . . . . . . . . . . . . . . . . . . . 9 Forming Chamber(After SN12000-2140 & SN22800-2170) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Forming Chamber(Before SN12001-2140 & SN22801-2170) . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Header Frame & Conditioner Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13 WheelAssembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Pitman Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Gearbox (AfterSN11700-2140 & SN22200-2170) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Gearbox (Before SNI1701-2140 & SN22201-2170) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Conditioner (Left Side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Conditioner (Right Side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Reel Variable Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Pitman & Wobble Arm Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 21 Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23 Sickle & Guards, 2140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25 Sickle & Guards, 2170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27 PTO Tower (After SN11700-2140 & SN22200-2170) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 PTO Tower With 092009 CV Joint Kit (Before SN11701-2140 & SN22201-2170) . . . . . . . . . . . . . . . . 29 PTO Tower (Before SN11701-2140 & SN22201-2170) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Telescoping Drive (Tower To Tractor)(After SN11700-2140 & SN22200-2170) . . . . . . . . . . . . . . . . . 31 Telescoping Drive (Tower To Tractor)(Before SN11701-2140 & SN22201-2170) . . . . . . . . . . . . . . . . 32 Hitchjacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Options & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-38 Mechanical Tongue Positioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Hydraulic Tongue Positioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-36 Center Skid Shoe & Cutter Bar Wear Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Tall Crop Divider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Narrow Windrow Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 38 Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-42 . . . . . . . . . . .. . . . . . Inside Back Cover Standard Hardware Torque Specifications . . . . .

Attaching Hardware Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover

Printed In U.S.A.

906305/1 P192

DECAL LOCATIONS GENERAL INFORMATION

PAINT NOTICE

Decal Locations information is provided to assist in the proper selection and application of new decals, in the event the original decal(s) become damaged or the machine is repainted. Refer to the listing for the illus­ tration reference number, part number, description and quantity of each decal provided in the Kit. Refer to the appropriate illustration(s) for replacement location(s).

Use this list to order paint for refinishing: 901225 One Gallon Blaze Paint 901226 One Gallon Maize Paint 610239 6 (120z Spray Cans) Blaze Paint 610240 6 (120z Spray Cans) Maize Paint

The Decal Set Number for the MC2140 and MC2170 is 117857. The Set includes the following:

To insure proper selection of the correct replacement decals, compare all of the various closeup location photographs to your machine, before starting to refin­ ish the unit. Then, circle each pictured decal (on or otherwise applicable to your machine) while checking­ off its part number in the listing. After you have veri­ fied all the decals needed for replacement, place any extra unnecessary decals aside for disposal.

Ref. Part No. Number 1. 060510 2. 060511 3. 061201 4. 067493 5. 075749 6. 082648 082677 7. 082666 8. 091444 9. 093020 10. 093365

Description & Quantity Decal· Jack Storage Position Decal· Jack Lift Position Decal· GEHL (3 Places) Reflector· Red (2 Places) Decal· Drive Line 1 Decal· 2170 (2 Places) Decal· 2140 (2 Places) Decal· Push Bar DANGER· Rotating Drive Line (2 Places) Decal· Lubrication WARNING· Rotating Component (2 Places) 11. 093366 Decal· Manual Location 12. 093367 WARNING· Manual 13. 093373 WARNING· General 14. 093381 WARNING· Lock Pin 15. 093466 WARNING· 540 RPM 16. 093643 DANGER· Moving (2 Places) 17. 093653 WARNING· Rotating Drive Line 18. 115974 WARNING· Block (2 Places) NOTE: Order PN 090910 for 24 yd ro/l of replace­ ment Striping

NEW DECAL APPLICATION Surfaces MUST be free from dirt, dust, grease and other foreign material before applying the new Decal.

To apply, remove the smaller portion of the decal backing paper and apply this part of the exposed adhe­ sive backing to the clean surface while maintaining proper position and alignment. Peel the other portion of the backing paper off slowly while applying hand pressure to smooth-out Decal surface.

A CAUTION ALWAYS observe Safety Rules shown on De­ cals. If Decals become damaged, or If the unit Is repainted, replace the Decals. If repainting, BE SURE that ALL Decals from the Kit(s) which apply to your machine, are affixed to your unit.

Front Master

7

8

906305/1 P192

2

Printed In U.S.A.

Printed in U.S.A.

3

906305/1 P192

MC2140/2170 - TONGUE (AFTER SN11700-2140 & SN22200-2170)

Before SN12001-2140 & SN22801-2170

Ref. No.

Part No.

01

330 -33269 076589 076590 081374 02 097775

090943

03 220-32514 650650 04 056773

05

06 07

097859 072330

087758 650710 087756

906305/1 P192

7 Part Name

Qty. Req.

GUARD /TIRE . ... . .. . . .. . . ..... . 1 FLS 3/8X1 (FLN) . . .. ... . .... . .. 2 FLS 1/ 2X1 .............. . . ..... 2 NUT/HEX FL WHIZ 1/ 2 . ... .... . 2 DRAWBAR/ ASSY . . . ... . .... . .. .. 1 (AFTER SN 12000-2140 & 22800 - 2170) DRAWBAR/ASSY ... .. ...... . . . . . 1 (BEFORE SN12001-2140 & SN22801-2170) PIN/WLDMT . . .. . ..... . . .. . ... . .. 1 CS 1/2X3-1/2 (LN) . . . .. .... .. .. 1 CLIP (5/ 16 N,L) .. . ..... ..... .. . . 1 (BEFORE SN11801-2140 & SN22648-2170) CLAMP .. .. ... .. .. . .. .. .. . . .. . . . 7 SCREW/SELF TAPPI NG .. . . .. . . 7 (AFTER SN12000-2 140 & 22800 -2170) PLATE / HITCH TOP . . . . . ... . .. ... 1 CS 5/8X2-1 /4 (L) . .. ....... . . . .. 4 PLATE/HITCH ASSY LOWER . . . . . 1

Ref. No.

Part No.

08

124127

097596

09 170 -33762 10 170-33767 11 0888418 071119 8 12 13

059743 048967

14

803098

8)

4

Qty. Req.

Part Name

HOSE/ ASSY .. . ... . . .... . . .. .. . .. 1 (AFTER SN12300- 2 140 & SN23500-2170) HOSE /ASSY ........ .... . . . .. . . . . 1 (BEFORE SN12301-2140 & SN23501-2170, AFTER SN 12000-2140 & 22800-2170) HOSE /ASSY ... . . .. .. . . .... , ... .. 1 HYDRAULIC LINE /ASSY . . ..... . . 1 JACK ........ .. . . . . .. . ........ . . 1 (2170 AFTER SN24000) JACK . . . . ..... .. . ... .. .......... 1 (2140 & 21 70 BEFORE SN24001) HUB/JACK (WELD -ON) .. . . . ... .. . 2 CLAMP . . ... ...... . .. .. ... . ... . .. 1 (AFTER SN11800-2140 & 22647 - 2170) CHAIN /SAFETY ..... ... . . . . . .. . .. 1 (OPTIONAL)

For breakdown, see page titled Hitchjack

Printed In U.S.A.

MC2140/2170 - TONGUE (BEFORE SN11701-2140 & SN22201-2170) / '1 / /

-

- '- - -

-

, I

'1

I

/

Ref. No.

Part No.

330-33269 076589 076590 081374 02 120-32769 03 220-32514 650650 04 056773 01

05 390-21979

06

087758

040-33324

650710

Printed In U.S.A.

Part Name

Y

Qty. Req.

GUARD/TIRE ................... 1 FLS 3/8X1 (FLN) .. .... ...... .. . 2 FLS 1/2X1 .............. . . ... .. 2 NUT/HEX FL WHIZ 1/2 ......... 2 DRAWBAR/ASSY . ... ... ......... 1 PIN/WLDMT ..... . ............... 1 CS 1/2X3-1/2 (LN) ............. 1 CLAMP ..... ...... ..... .. ....... 5 (AFTER SIN 11500-2140 & SN21500-2170) CLIP (5/16 N,L) ................. 6 (BEFORE SN11501-2140 & SN21501-2170) PLATE/HITCH TOP . .. ..... ..... . 1 (AFTER SIN 11500-2140 & SN21500-2170) P LA TE/H ITC H TOP ... . ... .. .... . 1 (BEFORE SN11501-2140 & SN21501-2170) CS 5/8X2-1/4 (L) .. .. ........... 4

Ref. No.

Part No.

07

087756

040-33323

08 170-33762 09 170-33767 10 071119 a 11 059743 12 048967

13

a)

5

803098

Qty. Req.

Part Name

PLATE/HITCH ASSY LOWER .. ... 1 (AFTER SIN 11500-2140 & SN21500-2170) PLATE/HITCH LOWER . ...... . ... 1 (BEFORE SN11501-2140 & SN21501-2170) HOSE/ASSY ..................... 1 HYDRAULIC LlNE/ASSY ......... 1 JACK .......... .. ...... .... ..... 1 HUB/JACK (WELD-ON) .... . ..... . 2 CLAMP ........ .. .. , ... .. . . ...... 1 (AFTER SIN 11500-2140 & SN21500-2170) CHAIN/SAFETY .. .... .. ........ .. 1 (OPTIONAL)

For breakdown, see page titled Hitchjack

90630511 P192

MC2140/2170· TRAILER FRAME, LEG & PUSHARM

18

~~5 16

2140 & 2170 Before SN24001

90630511 P192

6

Printed In U.S.A.

MC2140/2170 - TRAILER FRAME, LEG & PUSHARM Ref. No.

Part No.

01

220-32516 650495 02 097407 082701 650709 097772 120-32764 03 04 05 06 07 08

09 10 11 12 13 14 15

030-17662 360-32500 045-31407 360-32499 330-33279 650533 200-32506 570019 650709 250-32506 380-32350 200-32507 030-31904 081377 220-32517 570014 310-32513 570014

16 480-27676 18 240-32043 570014 19 070856 20 045-31406 21 117085d

090871 de

082603bc

Printed In U.S.A.

aty.

Part Name

Ref. No.

Req.

Part No.

22

082620 a 082623 23 220-32520 650577 24 200-32504 651123 25 400-21904

PIN/PUSH ARM PIVOT .......... 1 CS 1/2X1-1/4 (N,L) ............. 1 FRAME/TRAILER ASSY(2140) ... 1 (AFTER SN12000-2140) FRAME/TRAILER ASSY(2140) ... 1 (BEFORE SN12001-2140) CS 3/4X4 (N,L,P) ............... 2 FRAME/TRAI LER ASSY(2170) ... 1 (AFTER SN22800-2170) FRAME/TRAILER ASSY(2170) ... 1 (BEFORE SN22801-2170) CS 3/4X10 (N,2P) ............... 2 SPACER ........................ 2 BUSHING ....................... 2 SPACER ........................ 2 DEFLECTOR/THIRD LINK ........ 1 CS 3/8XH/2 (N,L.P) ........... 2 LINK/THIRD .................... 1 FITTING/GREASE .............. 2 CS 3/4X4 (N,L,P) ............... 2 YOKE/ASSY .................... 1 SPRING/FLOTATION ASSY ...... 2 PIVOT .......................... 1 U-BOL T 3/4 (2N) ................ 1 FLS 3/8X1-1/4 .................. 1 PIN\SPRING PiVOT ............. 1 FITTING/GREASE .............. 1 SCREW/SPECIAL (5/8 L) ........ 1 FITTING/GREASE .............. 1 (2140 & 2170 BEFORE SN24001) WASHER/SPECIAL .............. 1 (2140 & 2170 BEFORE SN24001) ARM/PUSH ASSY LT ............ 1 FITTING/GREASE .............. 1 NUT/LOCK SPECIAL 3/8 ......... 1 BUSHING ....................... 2 CYLINDER/HYDRAULIC ASSY ... 1 (AFTER SN12300-2140 & SN23500-2170) CYLINDER/HYDRAULIC ASSY ... 1 (BEFORE SN12301-2140 & SN23501-2170, AFTER SN11700-2140 & SN22200-2170) CYLINDER\HYD ASSY ........... 1 (BEFORE SN11701-2140 & SN22201-2170)

26 480-27676

27 200-32505 28 380-32342 29 040-33325 30

32 33 34 35

650491.

570002 220-32519 650577 082621 385-27865 480-42349 049038

36

111377

37

125882

38

125883 570014

31

a) b) c) d) e)

7

220-32515

aty.

Part Name

Req.

LEG/ASSY RT ................... 1 LEG/ASSY LT ................... 1 PiN/LOWER ..................... 2 CS 5/16X1-1/2 (LN) ............. 4 LINK/TRANSPORT ............... 2 CS 5/8X1 (L) ................... 2 WASHER/SPECIAL .............. 4 WASHER/SPECIAL .............. 2 CONNECTOR ....................2 SPRING/DOUBLE TORSION ...... 2 LIFT/FLEXIBLE ASSY ............ 2 PIN/WHEEL ASSY ............... 2 CS 3/8X1-1/4 (LN,P) ............ 2 FITTING/GREASE .............. 2 PiN/UPPER ...................... 2 CS 5/16X1-1/2 (LN) ............. 1 SPiNDLE ........................ 2 PLUG/SPRING ................... 4 PIN/PIVOT LH ................... 1 LATCH .......................... 1 (AFTER SN12000-2140 & SN22800-2170) DOOR/ ASSY ..................... 1 (AFTER SN12000-2140 & SN22800-2170) SPACER ........................ 1 (2170 AFTER SN24000) SCREW/SPECIAL ................ 1 FITTING/GREASE .............. 1 (2170 AFTER SN24000)

Not illustrated For Seal Kit, order 084574 For replacement order 090871, (2) 068938 & (2) 090870 For Seal Kit, order 093110 For replacement order 117085 & 054994

906305/1 P192

MC2140/2170 - PUSHARM & HYDRAULICS

(AFTER SN11700-2140 & SN22200-2170)

2

~

. 1. . .

15~

,

, 1

'.- .

14

Ref. No.

Part No.

01 030-17662 02 117086b

090584 ae

03 380-32351 c 04 240-32029 570019 06 480-27676 07 310-32513 570014 08 220-32518 655018 09 400-32443 10 097859 072330 11 124129 124128

090006 090674

12 420-33066

906305/1 P192

Qty.

Part Name

Req.

CS 3/4Xl 0 (N,2P) ............... 1 CYLINDER/HYDRAULIC ASSY ... 1 (AFTER SN12300-2140 & 23500-2170) CyLINDER/HyDRAULIC ......... 1 (BEFORE SN12301-2140 & SN23501-2170) SPRING/FLOTATION ASSY RT ... 1 ARM/PUSH ASSY RT ............ 1 FITTING/GREASE .............. 1 WASHER/SPECiAL .............. 2 SCREW/SPECIAL (5/8 L) ........ 2 FITTING/GREASE .............. 2 PIN/PIVOT RT .................. 1 PIN/COTTER 3/16X1-1/4 ....... 2 WASHER/SPECIAL .............. 3 CLAMP ......................... 3 SCREW/SELF TAPPiNG ....... 12 HOSE/ASSY (2140) ............. 1 HOSE/ASSY (2170) ............. 1 (AFTER SN 12300-2140 & 23500-2170) HOSE/ASSY (2140) ....... " ... 1 HOSE/ASSY (2170) ............. 1 (BEFORE SN12301-2140 & SN23501-2170) GROMMET ...................... 2

Ref. No.

Part No.

13

117085b

090871bd

14

124127

097596

090673

15

a) b) c)

d) e)

8

068938

Part Name

Qty. Req.

CYLINDER/HYDRAULIC ASSY .... 1 (AFTER SN12300-2140 & 23500-2170) CYLINDER/HYDRAULIC ASSY .... 1 (BEFORE SN12301-2140 & SN23501-2170) HOSE/ASSY ..................... 1 (AFTER SN12300-2140 & SN23500-2170) HOSE/ASSY ..................... 1 (AFTE R SN 12000-2140 & SN 22800­ 2170, BEFORE SN12301-2140 & SN 2350 1-2170) HOSE/ASSY ..................... 1 (BEFORE SN12001-2140 & SN22801-2170) ELBOW/90 DEG ADJUSTABLE .... 3 (BEFORE SN12301-2140 & SN23501-2170)

For Seal Kit order 093105 For Seal Kit order 093110 For replacement parts order 385-27865 Top Plug, 380-32350 Spring & 385-27867 Bottom Plug For replacement order 117085 & 054994 For replacement order 117086 & 054994

Printed In U.S.A.

MC2140/2170 - PUSHARM & HYDRAULICS (BEFORE SN11701-2140 & SN22201-2170)

Ref. No.

Part No.

01 030-17662 082604b 02 03 380-32351d 04 240-32029 570019 06 480-27676 07 310-32513 570014 08 220-32518 655018 09 400-32443 10 065180 11 170-33776

Printed In U.S.A.

Part Name

Qty. Req.

Ref. No.

CS 3/4X10 (N,2P) ............... 1 CYLINDER/HYDRAULIC 2" ....... 1 SPRING/FLOTATION ASSY RT ... 1 ARM/PUSH ASSY RT ............ 1 FITTING/GREASE .............. 1 WASHERISPECIAL .............. 2 SCREW/SPECIAL (5/8 L) •....... 2 FITTING/GREASE .............. 2 PIN/PIVOT RT .................. 1 PIN/COTTER 3/16X1-1/4 ....... 2 WASHERISPECIAL .............. 3 CLAMPIINS HOSE ............... 3 HOSE/ASSY .................... 1

Part No.

12 420-33066 13 082603 ac 14 170-33772 15 054848

a) b) c) d)

9

Part Name

Qty. Req.

GROMMET ......................2 CYLINDER/HYD ASSY ........... 1 HOSE/ASSY ..................... 1 ELBOW .........................3

For Seal Kit order 084574 For replacement order 090584, 068938 & 090870 For replacement order 090871, (2) 068938 & (2) 090870 For replacement parts order 385-27865 Top Plug, 380-32350 Spring & 385-27867 Bottom Plug .

906305/1 P192

MC2140/2170 - FORMING CHAMBER (AFTER SN12000-2140 & SN22800,:,2170)

14

.,=,

:

:/

/"

I~ I I

I

~19

Ref. No.

Part No.

01

082720 330-33262 655022 400 -32443 02 082697 290-32461

03 04 05 06 07 08 09 10 11

655018 400-32443 290 -32462 650553 420-30377 090-32297 076958 390-32643 076588 220-32513 380-32348 220 - 18200

906305/1 P192

aty.

Part Name

Req.

FLUFFER/ASSY (2140) ...... .... 1 FLUFFER/ASSY (2170) .. .... .... 1 PIN /COTTER 3/16X1-3/4 ....... 1 WASHER/SPECIAL ............. 2 CONTROLIFLUFFER ASSY . . . . . . 1 (2140 ONLY) CONTROLIFLUFFER ASSY .. ... . 1 (2170 ONLY) PIN/COTTER 3/16X1 - 1/4 ... .. . ... 1 WASHER/SPECIAL .... ... .. . .. . 2 ROD/CONNECTING ....... . .. ... 3 PIN/COTTER 1/8X3/4 (3/8 P) .. . 6 GROMMET/RUBBER ... . .... .. .. 3 HANDLE/ASSY . ... ... . ..... ... .. 1 PIN/SPRING PLAIN ...... . . .. ... 1 RETAINER .. ...... . ..... ... ..... 2 FLS 3/8X3/4 (FLN) . ..... . . . . . . . 4 PIN/ASSY (73/8 P) ... . ....... ... 1 SPRING/COMPRESSION . .. . . .. . 2 PIN / ROLL . ... . . . .. ... .. .... ..... 1

Ref. No.

Part No.

13

097332 097334 097333 097335 082712 330-33259 097601 097599 097600 097598 072330 390-32696 650949 400-18916 420-33903 092204 092201 092208 092207 092406 045-31404

14 15 16

17 18 19 20 21 22 23

10

Part Name

Qty. Req.

WINDROWER/RT (2140) .. . ..... . 1 WINDROWER/RT (2170) ......... 1 WINDROWER/LT (2140) . . . .. ..... 1 WINDROWER/L T (2170) .. . . . ... .. 1 COVER/ASSY (2140) .. . . .. . .... .. 1 COVER/ASSY (2170) ... .. . . .. . ... 1 PLATE/CENT BACKING (2140) . .. 1 PLATE/CENT BACKING (2170) . .. 1 PLATE/SIDE BACKING (2140) .... 2 PLATE/SIDE BACKING (2170) .... 2 SCREW/SELF TAPPiNG ........12 STIFFENERIVEIN(2170 ONLY) ... 2 THMS 5/16X3/4 (N ,L,P) . .. .... .. 6 WASHER .... . ... ..... .. . . ...... . 1 EDGING . ... ....... .... .... . ... AR SUPPORT/ASSY LT . .. . .. .. . .. ... 1 SUPPORT/ASSY RT . . . .... ..... . 1 DIRECTOR/LEFT . .. .... .... . .. .. 1 DIRECTOR/RIGHT . .. ... .. ..... .. 1 EDGING/ DIRECTOR . .. . . . .. .. .. . 2 BUSHING OILiTE .. .. ......... .. . 2

Printed In U.S.A.

MC2140/2170 - FORMING CHAMBER (BEFORE SN12001-2140 & SN22801-2170)

13

14

12

/ Ref. No.

Part No.

082720 330-33262 655022 400-32443 082697 02

01

290-32461 03 04 05 06 07 08 09 10 11 12

655018 400-32443 290-32462 650553 420-30377 090-32297 076958 390-32643 076588 220-32513 380-32348 220-18200 082717 330-33260

Printed In U.S.A.

Part Name

19

Qty. Req.

FLUFFER/ASSY (2140) .......... 1 FLUFFER/ASSY (2170) .......... 1 PIN/COTTER 3/16X1-3/4 ....... 1 WASHER/SPECiAL ............. 2 CONTROLIFLUFFER ASSY · ..... 1 (2140 ONLY) CONTROL/FLUFFER ASSY · ..... 1 (2170 ONLY) PIN/COTTER 3/16X1-1/4 ......... 1 WASHER/SPECIAL ............. 2 ROD/CONNECTING ............. 3 PIN/COTTER 1/8X3/4 (3/8 P) ... 6 GROMMET/RUBBER ............ 3 HANDLE/ASSY .................. 1 PIN/SPRING PLAIN ............. 1 RETAINER ...................... 2 FLS 3/8X3/4 (FLN) ............. 4 PIN/ASSY (73/8 P) .............. 1 SPRING/COMPRESSION ........ 2 PiN/ROLL ....................... 1 CHAMBER/FORMING SIDE · ..... 1 LH (2140 ONLY) CHAMBER/FORMING SIDE · ..... 1 LH (2170 ONLY)

Ref. No.

Part No.

13

082714 330-33261

14

082712 330-33259

15

083690 160-32633

16

083689 160-32632

650437 17 390-32696 650949 18 400-18916 19 420-33903 20 045-31404

11

Part Name

Qty. Req.

CHAMBER/FORMING SIDE ....... 1 RH (2140 ONLY) CHAMBER/FORMING SIDE ....... 1 RH (2170 ONLY) COVER/ASSY ................... 1 (2140 ONLY) COVER/ASSY ................... 1 (2170 ONLY) PLATE/CENTER BACKING ....... 1 (2140 ONLY) PLATE/CENTER BACKING ....... 1 (2170 ONLY) PLATE/SIDE BACKING ........... 2 (2140 ONLY) PLATE/SIDE BACKING ........... 2 (2170 ONLY) CB 5/16X5/8 (LFLN.L.P) .......12 STIFFENERIVEIN ................2 (2170 ONLY) THMS 5/16X3/4 (N.L.P) .........6 WASHER ........................ 1 EDGING ....................... AR BUSHING OIUTE ................2

906305/1 P192

MC2140/2170 - HEADER FRAME & CONDITIONER ROLLERS

906305/1 P192

12

Printed In U.S.A.

MC2140/2170· HEADER FRAME & CONDITIONER ROLLERS Ref. No.

Part No.

01 330-33301 650687 02 290-32471 03 420-30377 04 220-16199 05 420-34448 06 330-33283 076588 07 300-31918 082723 08 300-31919 082694 09

082984

090947

10 11 12 13 14

650953 610748 078580 068642 079923 330-33297 076588

Printed In U.S.A.

Part Name

Qty. Req.

Ref. No.

Part No.

15 330-33284

SHIELD/ASSY RT ............... 1 CB 5/16X3/4 (N,L,P) ............ 5 ROD/ASSY ...................... 1 GROMMET/RUBBER (5/16 P) .... 1 PiN ............................. 3 TOOLIASSY .................... 1 DEFLECTOR/ASSY .............. 2 FLS 3/8X3/4 (FLN) ............. 4 ROLLER/CONDITIONER ......... 1 UPPER (2170 ONLY) ROLLER/CONDITIONER ......... 1 UPPER (2140 ONLY) ROLLER/CONDITIONER ......... 1 LOWER (2170 ONLY) ROLLER/CONDITIONER ......... 1 LOWER (2140 ONLY) SHIELD/TRANS ASSY ........... 1 (BEFORE SN11701-2140 & SN22201-2170) SHIELD/TRANSMISSION ASSY .. 1 (AFTER SN11700-2140 & SN22200-2170) THMS 3/8X3/4 (N,L) ............ 4 CATCH/KEEPER ................ 2 POUCH/MANUAL ................ 1 WASHER/SPECIAL .............. 4 RIVET/BLlND ................... 4 SHIELD/BELT ................... 1 FLS 3/8X3/4 (FLN) ............. 5

097827

650834 16 420-34436 17 230-32500 082699 650495 18 390-32658 19 380-32348 20 21

083397 650490 097828 097857 082705 a

22 420-34437 23 420-34447 24 420-34438 a)

13

Part Name

Qty. Req.

SHOE/ROCK LT ................. 1 (BEFORE SN12001-2140 & SN22801-2170) SHOE/ROCK LT ................. 1 (AFTER SN12000-2140 & SN22800-2170) CB 1/2X1-1/2 (N,L,1P) ..........3 PLUG/HOLE .....................2 BAR/PUSH ASSY ................1 (2170 ONLY) BAR/PUSH ASSY ................ 1 (2140 ONLY) CS 1/2X1-1/4 (N,L) .............4 LATCH ..........................2 (2) 5/16 P SPRING/COMPRESSiON ......... 2 (2) 5/16 LN SHIELD/END SICKLE ............ 1 CS 3/8X1 (NILN,P) .............. 1 FRAME/MAIN ASSY (2140) ....... 1 (AFTER SN12001-2140) FRAME/MAIN ASSY (2170) ....... 1 (AFTER SN22800-2170) FRAME/MAIN ASSY (2140) ....... 1 (BEFORE SN 12001-2140) PAD/END PANEL ................2 EDGING ......................... 1 PADITRANSMISSION ............ 1

For replacement order 097828

906305/1 P192

MC2140/2170 - WHEEL ASSEMBLY

5

Ref.

Part

No.

No.

01 02 03 04

079716 042163 042162 080795

091870

05

06

550041

072624

906305/1 P192

Qty.

Ref.

Part

Req.

No.

No.

SEAL/GREASE . ... . .... . ... . . ... 1 CONE/BEARING ..... . .. ... .. . .. 2 CUP/BEARING INNER . .. ..... . .. 2 HUB/WHEEL ASSY (INCL 3,7) ... 2 (BEFORE SN 12001-2140 & SN22801-2170) HUB ASSY (INCL 3,7,13,14) ..... 2 (AFTE R SN 12000-2140 & SN22800-2170) BOLT/WHEEL ............ . .... . 12 (BEFORE SN 12001 - 2140 & SN22801-2170) WHEEL/DC 14 X 8 KB . ... .. . .... 2

07 08 09 10 11 12 13

520054 520201 066717 653102 655010 076586 045582 046000

14

046001

Part Name

14

Qty.

Part Name

Req.

CUP/BEARING OUTER .. ..... . ... 2 BEARING/CONE . ....... . . . . .. .. . 2 WASHER/SPiNDLE . ....... . .... . 2 NUT/SLOTTED 7/8 NF . ....... . .. 2 PIN/COTTER 1/8X1 - 1/2 .. .... . . . 2 CAP/GREASE . .. .. ..... . ........ 2 VALVE/TIRE .. . . . .. .. . ... . .. ... .. 2 BOLT/WHEEL .. . ...... . .... . . .. 12 (AFTER SN12000- 2140 & SN22800-2170) NUT/WHEEL . . ....... . .. . ... . . .. 12 (AFTER SN12000- 2140 & SN22800-2170)

Printed In U.S.A.

MC2140/2170 - PITMAN DRIVE

21

lower Roll Shaft

Ref. No. 01 02 03 04 05 06 07

08 09 10 11 12

Part No. 010-32392 650786 370-32142 650338 004942 045-31395 650202 260-32252 020-32214 045-31417 651119 6H 154 400-20466 240-32034 570014 180-10909 360-21711 650494 220-21516 655006 126342

13 250-19364 14 290-32468 15 040-33350 650494 16 360-32512 17 380-25728 18 260-32253 i 9 260-25753

PrInted In U.S.A.

Part Name

Qty. Req.

Ref. No.

FLANGE/BEARING .............. 1 CB 3/8Xl-l/4 (N,L,P) ........... 3 SPROCKET/lIT ................. l SHSS 1/4-20 ................... 2 KEY 1/4X1/4Xl .................. 1 BUSHING (W/SCREWS) ......... 1 SHSS-SL 5/16X5/l6 (L) ......... 3 SHEAVE ........................ 1 V-BELT/B SECTION ............. 1 BUSHING/PiVOT ................ 1 CS 3/4X10 (N,L,P) ............. 1 WASHER/SPECIAL ............. 2 WASHER/SPECiAL .............. 1 ARM/IDLER ASSY ............... 1 FITTING/GREASE .............. 1 KEY/sa. HARD .................. 1 SHIM ........................... 4 CS 1I2X1 (L) ................... 4 PiN .......................... '" 1 PIN/COTTER 1/8Xl ............ 1 FLAP ........................... 1 (AFTER SN24000-2170) YOKE/ADJUSTING .............. 1 ROD/ADJUSTING (1/2N) ......... 1 ANCHOR/ASSY ................. 1 CS 1/2X1 (L,P) ................ 2 SPACER (2 1/2N,l P) .......

1 SPRING/COMPRESSION ........ 1 PULLEY/PITMAN ................ 1 IDLER/FLAT BELT ............... 1

Qty. Req.

Part Name

CS 1/2X6-1/2 (N,L,P) ........... 1 ELEMENT/LOCKING SET ...... " .2 SPACER/LONG .................. 1 SPACER/SHORT (BEFORE ....... 1 SN12301-2140 & SN23501-2170) FLANGE ........................ 1 23 360-32509 c CS 3/8Xl-1/4 ...................6 650491 (BEFORE SN12301-2140 & SN23501-2170) GEARBOX/ASSM ................ 1 24 090086 a (AFTER SN11700-2140 & SN22200-2170) 250-32571 ab GEARBOX/ASSM ................ 1 (BEFORE SNl1701-2140 & SN22201-2170) COLLAR/BEARI N G ............... 1 25 520159 SHIELD/DRIVELINE (INCL 12) .... 1 26 126341 (AFTER SN24000-2170) SHIELD/SAFETy ................. 1 090949d (BEFORE SN24001-2170 & AFTER SN11700-2140 & SN22200-2170) CS M8X16 (P) ................. .4 656093 RING/LOCKING .................. 1 27 350-32475 FLANGE (AFTER SN12300-2l40 .. 1 28 124472 & SN23500-2170)

650886 20 045-31396 21 360-32507 22 360-32508 c

a) b) c)

d)

15

For breakdown, see page titled Gearbox For replacement order 090086 and 510233 For replacement order 124472 For replacement order 126341 906305/1 P192

MC2140/2170 - GEARBOX (AFTER SN11700-2140 &SN22200-2170)

17--l1 I

16 15

12

9-@

10

Ref. No.

Part No. 090086

01 02 03 04 05 06 07 08 09

090087 090088 089133 090089 090090 084595 090091 090092 090093

906305/1 P192

19--@

Qty. Req.

Ref. No.

Part No.

GEARBOX/ASSY .. . .. . ...... . .. . 1 CONSISTS OF: HOUSiNG/GEARBOX . .... . ...... 1 BEARING . ....... . ........ .. .. .. 4 RING/SNAP ... . . . . . . .. ... . ...... 3 SPACER ... . .... . . ... . .... . . . ... 1 SEAL/OIL . . ... . ... . ............. 2 SHIM . ...... .. .. . .. . .... . .. . . .. . 2 SHAFT/INPUT ... . ... .. .... . . . ... 1 RING/RETAINING .... .... ...... . 1 LOCKNUT ... . .... . . . . .. . . . . . ... 1

10 12 13 14 15 16 17 18 19 20 21

090094 090096 090097 090098 090099 090493 090494 089131 090495 090496 089134

Part Name

16

Part Name

Qty. Req.

SHAFT/OUTPUT ........ . .. .. ... . 1 PINION ....... ........... .. .. .. . 1 PLUG ... .. ...................... 2 DIPSTICK/OIL .. .. ...... .... ..... 1 GASKET/GEARBOX COVER . .. .. . 1 COVER/GEARBOX ... . . . . . .. .. ... 1 BOLT ........ .. ........ .. ...... .4 CAP .... . . . ... .. ....... .. .... . .. 1 WASHER/SPRING . .. . ......... . . 1 GEAR . . . .. .... . ...... . .. . . ... ... 1 SHIM ....... . . . . . ...... .. . . .. . .. 2

Printed in U.S.A.

MC2140/2170 • GEARBOX (BEFORE SN11701-2140 & SN22201-2170)

Ref. No.

Part No. 250-32571

01 02 03 04 05 06 07 08 09 10 11

004146 044965 600759 8 520033 520204 600324 320-32632 180-10194 160-32210 230-24034 230-32183 660033

Printed In U.S.A.

aty.

Part Name

Ref. No.

Req.

Part No.

12 160-32163 650485 13 210-32045 14 130-13131 15 140-32240 16 335 -32129 17 140-32176 18 230-27194 19 335-32189 20 320 -32577 21 180-32134 22 655537

GEARBOX/ASSY . . . ... ... ....... 1 CONSISTS OF: SEAL ..... . ........... .. ........ 1 RING/SNAP ................ .. ... 4 SHIM ...... .. ............. . ....AR BEARING/CUP .. ......... ..... . . 4 BEARING/CONE . .. .. ....... .. .. 4 NUT/STAKE 1-3/8 . ... ... . ....... 1 SHAFT/OUTPUT . ... ...... . ..... 1 KEY/WOODRUFF ..... . .. .. . .. . . . 1 HOUSING .... . ........... . . . ... . 1 PLUGIVENT . . .. . ..... . .... ... . . 1 BUSHING 3/8-1/8 ....... . ....... 1 PLUG/PIPE 3/8 .................. 1

a)

17

Part Name

Qty. Req.

COVER ... ... ....... . ....... ... . 1 CS 5/16X5/8 .. .. .... ........... .4 NUT/STAKE 1-1/4 . .. ............ . 1 GASKET ... ....... . . .. . ... . . .... 1 GEAR/PINION 14 TOOTH ........ 1 CAP/SEAL . . . ............... ... .. 1 GEAR/BEVEL 21 TOOTH ... . . . ... 1 PLUG/DRAIN .................... 1 SEAL/INPUT SHAFT ........ .. ... 1 SHAFT/INPUT .... . ...... . ....... 1 KEY/SQUARE ........ .... . . ..... 1 KEY/WDRF 5/16X1-1/4 ..... ...... 1

Not illustrated

906305/1 P192

MC2140/2170 - CONDITIONER (LEFT SIDE)

Ref. No. 01 02 03 04 05 06

Part No. .

010-32322 650495 089871 077601 650811 089872 240-32032 124466

045-31361

650765

906305/1 P192

Part Name

Qty. Req.

Ref. No.

FLANGETTE .... . ............... 2 CS 1/2X1-1/4 (L) .......... . .... 4 BEARING/BALL ................. 1 RETAINER/BEARING ........ . .. . 2 CB 1/2Xl (LN) ............. . ... 4 BEARING/BALL ... ... ..... . . .... 1 ARM/ROLL ASSY LT .... ...... .. 1 BUSH!NG ....................... 1 (AFTER SN 11700-2140 & 22201-2170) BUSHING .................. . .... 1 (BEFORE 11701-2140 & 22200-2170) CB 5/8X2-3/4 (LN,L) ............ 1

Part No.

07 480-27676 08 380 -32354 09 385-27865 310-32513 10 360-32503 11 360-32504 650533 12 520195 089867 13 14 044090 056640 15 125155 16

18

aty.

Part Name

Req.

WASHER/SPECIAL .............. 1 SPRING/ROLL ASSY (INCL 9) .... 1 PLUG/SPRING ................... 1 CS 3/4X6 (N,P) .. .. ....... .. . . .. 1 SHIM 7/64" ..................... .4 SHIM 1/16" ............... .. .....3 CS 3/8X1-1/2 (N,L) ... .. .. ...... 1 COLLAR/BEARING . . ............. 1 COLLAR/BEARING .. . ............ 1 SPACER ...................... AR RING/RETAINING . ... . ........ .. . 1 SHIM 1/32 '" .. . .. . .. ... ....... AR

Printed In U.S.A.

MC2140/2170 .. CONDITIONER (RIGHT SIDE)

Ref. No. 01

02 03

04 05

Part Name 160-32646 650488 650790 089872 077601 650811 650494 410-32402.

651142 089262 a d

370-32100 ce 06 400-32447 a 650972 07 180-21917 a 08 090760

09

10 11 12 13

500178 c 087362

370-32112 c 650213 180-13696 360-32503 360-32504 650533 124195

0907061) 240-32033 c

Printed In U.S.A.

Qty. Req.

Ret No.

Part No.

14 380-32354 15 385-27865 16 310-32515 17 093509 650765 18 124466

WEB ............................ i CS 3/8X3/4 (LN) ............... 3 CB 3/8X3/4 (LN) ............... 1 BEARING/BALL ................. 2 RETAINER/BEARING ............ 4 CB 1/2X1 ...................... 4 CS 1/2X1 (SLN) ................ 4 HUB/REEL DRiVE ............... 1 SHSS 3/8X5/8 ................. 2 SPROCKET/24T ................. 1 (AFTER SN11700-2140 & SN22200-2170) SPROCKET/20T ................. 1 WASHER/CLAMP ................ 1 CS 7/16X1-3/4 GR8 (L) ......... 4 KEY/GIS ........................ 1 CHAIN/ROLLER #60X82 ......... 1 (AFTER SN11700-2140 & SN22200-2170) CHAIN/ROLLER #60X78 ......... 1 SPROCKET/24T ................. 1 (AFTER SN11700-2140 & SN22200-2170) SPROCKET/ASSY ............... 1 SHSS 3/8X3/S ................. 2 KEY ............................ 1 SHIM 7/64" ..................... 4 SHIM 1116" ..................... 3 CS 3/8X1-1/2 (N,L) ............. 1 ARM/ROLL ASSY RT ............ 1 (AFTER SN 11700-2140 & SN22200­ 2170, BEFORE SN12301-2140 & SN23501-2170) ARM/ROLL ASSY RT ............ 1 ARM/ROLL ASSY RH ............ 1

045-31361 c 650765 19 480-27676 20 124190

030-31906 a 650756 21 520195 22 115726 126259f 23 115727

24

044090

25

125155

a) b) c) d) e) f)

19

Part Name

Qty. Req.

SPRING/ROLL ASSY (3/4N,P) .... 1 PLUG/SPRING ................... 1 SCREW/SPECIAL ........ , ....... 1 SPROCKETIIDLER ASSY ......... 2 CB 5/8X2-3/4 (2N,L,P,2 3/4P) ... 1 BUSHING ....................... 1 (AFTER SN 11 700-2140 & SN22200-2170) BUSHING ....................... 1 CB 5/8X2-3/4 (LN,L) ............ 2 WASHERISPECIAL .............. 2 ADJUSTMENT/ASSY (4 1/2N) .... 1 (AFTER SN 12300-2140 & SN23500-2170) BOL T/ADJUST ASSY (2 3/8N) .... 1 CB 5/8X2-3/4 (N,L,P,7/SP) ...... 1 COLLAR/LOCK .................. 2 SPROCKET/24T ................. 1 SPROCKET/20T ................. 1 ELEMENT/LOCKING 1-3/4 SHAFT 1 (AFTER SN12300-2140 & SN23500-2170) SPACER ...................... AR (AFTER SN12300-2140 & SN23500-2170) SHIM 1/32 ..................... AR

Before SN12301-2140 & SN23501-2170.

For replacement order 124195 & 124190.

Before SN11701-2140 & SN22201-2170.

For replacement order 115726 & 115727.

For replacement order 126259 & 115727.

Never used in production. Service Part Only.

906305/1 P192

MC2140/2170 - REEL VARIABLE DRIVE

Ref. No. 01 02 03 04 05 06

Part No. 260-32265 a 098032 360-32505 064422 370-32113 320-32578 220-19812 650553 027003 650704

906305/1 P192

O1y.

Part Name

Ref. No.

Req.

Part No.

520085 07 520065 08 09 360-32506 10 370-18061 651104 11 500076

PULLEY/HALF (OLD STYLE) ..... 2 PULLEY/HALF (NEW STYLE) .... 2 SHIM 7/64" ..................... 5 FLS 3/8X1-1/2 ................. 4 SPROCKET/ASSY 50T ........... 1 JACKSHAFT .................... 1 PIN ............................. 1 PIN/COTTER 1/8X3/4(5/16P) ... 1 FLANGETTE .................... 4 CB 3/8X1 (N.L) ................. 6

a)

20

Part Name

Qty. Req.

COLLAR/LOCK .................. 2 BEARING .......................2 SPACER/IDLER (5/8N.P.7/8P) .... 1 SPROCKETIIDLER ............... 1 CB 5/8X3-1/4 ................... 1 CHAIN/ROLLER #50X58 .......... 1

For replacement order 098032

Printed In U.S.A.

MC2140/2170 - PITMAN & WOBBLE ARM DRIVE

Ref. No.

Part No.

01 260-32253 05 520093 098235 06

240-31990

07 390-16339 651113

390-32585 650585

08 200-32366 651239 210-19530 570014 09 240-32035 10 520205

Printed In U.S.A.

Part Name

Qty. Req.

Ref. No.

FL YWHEELIPITMAN ............. 1 COLLAR ........................ 1 ARM/PITMAN ASSY ............. 1 (AFTER SN12000-2140 & SN22800-2170) ARM/PITMAN ASSY ............. 1 (BEFORE SN12001-2140 & SN22801-2170) CLAMP/PITMAN ................. 1 CS 7/16Xl-3/4 (N) ............. 1 (AFTER SN12000-2140 & SN22800-2170) CLAMP/PITMAN ................. 1 CS 1/2X2 (N) .................. 1 (BEFORE SN 12001-2140 & SN22801-2170) SOCKET/ASSY (LONG) .......... 1 CS 1/2X2-1/2 GR8 (P) .......... 2 NUT/LOCK FLANGE ............ 2 FITTING/GREASE .............. 1 ARM/WOBBLE ASSY ............ 1 BEARING/CUP .................. 1

Part No.

11 520206 12 360-14855 13 360-32510 076589 14 030-31908 650933 655024 15 360-32511 360-32520 650644 16 200-32448 651240 210-19530 076002 17 077031 18 654006 19 098237 650491 20 400-15947 650490 21 126297

21

Qty.

Part Name

Req.

BEARING/CONE .................2 WASHER/SPECIAL ..............3 SHIM ...........................6 FLS 3/8X (FLN) .................2 BOLT/WOBBLE ARM ASSY ....... 1 NUT/SLOTTED 1" ............... 1 PIN/COTTER 3/16X2 ............ 1 SHIM 1116" ..................... .4 SHIM 1/32" ...................... 2 CS 1/2X3 (LN,P) ................ 2 SOC.KET/ASSY (SHORT) ......... 1 CS 1/2X3 GR8 .................. 2 NUT/LOCK FLANGE ............ 2 FITTING/GREASE .............. 1 HOUSiNG/CAST ................. 1 WASHER ........................6 CLAMP ..........................3 CS 3/8Xl-1I4 (L) ...............3 WASHER ........................ 1 CS3/8X1 (L) ................... 1 BEARING/ASSY ................. 1

906305/1 P192

MC2140/2170 - REEL

7

LONG TINE BAR

r-'-llll'"

SHORT TINE BAR

I~4-1/2"

- -4-

I TINE BAR DETAIL

906305/1 P192

22

Printed In U.S:A.

MC2140/2170 .. REEL Ref.

Part

No.

No.

01

090938 082688

02 03 04 05 06 07 08 09 10 11

120-32773 520085 027003 650704 520065 040-33351 650527 390-32657 061930 260-32251 650855 180-10909 020-32215 380-14677 030-31888

12 048182 13 360-32513 14 240-32036 650644 650821 15 200-32509 16 030-13498

17 120-32774 650527 650786 650860 18 390-32703 19 076588 20 210-19533 21 082687 110-32416 22 310-16296 23 076159 24 400-10627

Prj nted In U.S.A.

Part Name

Qty. Req.

REELlWLDMT (2140 ONLY) ...... 1 (AFTER SNl1700-2140) REELlWLDMT (2140 ONLY) ...... 1 (BEFORE SNl1701-2140) REELlWLDMT (2170 ONLY) ...... 1 COLLAR/LOCK .................. 2 FLANGETTE .................... 4 CB 3/8Xl (N.L) ................. 3 BEARING ....................... 2 MOUNT/BEARING RIGHT ........ 1 CB 1/2X1-1I4 (N.L,P) ........... 3 STRAP/ADJUSTING ............. 1 CS 1/2X4 (N,L) ................. 1 PULLEY ........................ 1 SQHSS 1/2X1 (IN) ............. 2 KEY/Sa. HARD .................. 1 V-BELT/C SECTION ............. 1 SPRING/EXTENSiON ............ 1 BOLT/EYE ...................... 1 (1) 3/8 P,2N IDLER/FLAT BELT ............... 1 SPACER ................. , ...... 1 ARMIIDLER WLDMT ............. 1 CS 1/2X3 ...................... 1 CS 5/8X1 (L.P) ................. 1 PIVOT/WLDMT .................. 1 ROD/END ....................... 1 (2) 3/8 L, P (1) 3/8 N,NF-N CAM/ASSY ...................... 1 CB 1/2X1-1/4 (N,L,P) ........... 3 CB 3/8X1-1/4 .................. 2 CB 3/8X1-3/4 (3P) .............. 1 STRAP/REEL BAT MOUNT ......AR FLS 3/8X3/4 (FLN) .............AR FLN 3/8 ........................ 24 BAT/REEL (21400NLY) ......... 4 BAT/REEL (2170 ONLY) ......... 4 CS 5/8X2-1/4 (N,L) .............. 4 BEARING ....................... 4 WASHER/SPECIAL ............. 20

Ref.

Part

No.

No.

25

090941

082682

090796

290-32470

651162 090939

082685

090770

290-32469

650545 26 160-32707

160-32361

27 010-32388

010-32301

28 650977 29 054031 30 210-31017 31 110-32354 32 220-32566

23

Qty. Part Name

Req.

BAR/TINE ASSY LONG ........... 2 (2140 ONLY) (AFTER SN11700-2140) BAR/TINE WLDMT LONG ......... 2 (2140 ONLY) (BEFORE SN11701-2140) BAR/TINE ASSY LONG ........... 2 (2170 ONLY) (AFTER SN22200-2170) BAR/TINE WLDMT LONG ......... 2 (2170 ONLY) (BEFORE SN22201-2170) PIN/COTTER 5/16X2 ........... .4 BAR/TINE ASSY SHORT ......... 2 (2140 ONLY) (AFTER SN11700-2140) BAR/TINE WLDMT SHORT ....... 2 (2140 ONLY) (BEFORE SN11701-2140) BAR/TINE ASSY SHORT ......... 2 (21700NLY) (AFTER SN22200-2170) BARITINE WLDMT SHORT ....... 2 (21700NLY) (BEFORE SN22201-2170) CS 5/16X1-1/4 ...............•.24 (FLN.L,12P) HOUSiNG/BEARING ............12 (AFTER SN 11700-2140 & SN22200-2170) HOUSiNG/BEARING ............12 (BEFORE SN11701-2140 & SN22201-2170) BEARING/PLASTIC .............12 (AFTER SNl1700-2140 & SN22200-2170) BEARING/PLASTiC .............12 (BEFORE SN11701-2140 & SN22201-2170) CS 5/16X2-1/4 GR8 (P) ........ AR CLIP/TINE ..................... AR NUT/SPECiAL ...... , .......... AR TINE/DOUBLE ................. AR PIN/TINE BEARING .............12 (AFTER SN11700-2140 & SN22200-2170)

906305/1 P192

MC2140- SICKLE & GUARDS

REGULAR GUARDS

906305/1 P192

STUB GUARDS

24

Printed In U.S.A.

MC2140 - SICKLE & GUARDS Ref.

Part

No.

No.

01 082724 03 110-32342 650495 650527 650791 650834 04 091389 0 110-32336 0 05 110-32323 06 360-32359 07 110-32330 650453 650494 650495 650791 650834 030-31887 08 09 10 11 12 13 14

097995 110-32409 110-32334 110-32341 110-10655 360-32404 110-32349 090580

082679

090655

088739

15

H7547A a 340-32015b 060635 m 050056 n

16 340-16454 c 340-16455d 071390 e 071393, 17 110-32316 18 390-16339 651113

Printed In U.S.A.

Qty. Req.

Part Name

GUARD/SINGLE RT ............. 1 GUARD/SICKLE ................ 13 CS 1/2X1-1/4 (N) ..............AR CS 1/2X1-1/4 (N) ..............AR CS 1/2X1-3/4 (N) ............... 3 CS 1/2X1-1/2 (N) ..............AR CLIP/HOLD-DOWN .... 0o.. 000 .. 0 6 (AFTER SN11700) CLIP/HOLD-DOWN 00 ... 0... 0.0006 (BEFORE SN 11701) CLiP/HOLD-DOWN/HIGH ARCH .. 1 SHIM 1/8 ....................... 1 GUARD/STUB ................. 013 CS 1/2X1-1/2 (N) ... 0.... 0.0 .. 001 CS 1/2X1 (N) .................. 1 CS 1/2X1-1/4 (N) 0............ 001 CB 1/2X1-3/4 (N) ..... ~ ......... 4 C B 1/2X 1-1/2 (N) 1 CB 1/2X2-1/2 (N,LN) ......... 019 0

•

0

Ref.

Part

No.

No.

19

083729

082827

20

091382 g 091572h

21

091383j 091571j

091384k 091385,

••••••••••••

22 110-32405

C B 1/2X2-3/4 ... 00.. 0. 000...... 3 GUARD/SICKLE .......... 0000. 00 1 HOLD-DOWN/STUB GUARD 0000 11 HOLD-DOWN/CLIP 00 .. 0........ 0 2 SHIM 1/32 .....................AR SHIM 3/16 ..................... 13 CLIP/ADJUSTMENT. 00000.00 ... 22 SICKLE W/O HEAD (BOLTON) 000 1 (UNDER SERRATED) (AFTE R SN 11700) SICKLE W/O HEAD 0............. 1 (UNDER SERRATED) (BEFORE SN 11701) SICKLE W/O HEAD (BOLT ON) .00 1 (TOP SERRATED) (AFTER SN11700) SICKLE W/O HEAD. o... 00.0 .... 0 1 (TOP SERRATED) (BEFORE SN11701) SECTION/UNO. SERRATED 0.. 0.AR SECTION/TOP SERRATED .. 0..AR SECTION/UNDER SERRATED ..AR (CHROMED) SECTION/OVER SERRATED .. 0oAR (CHROMED) SECTION/HALF RH 0.... 000000... 1 SECTION/HALF LH '" ..... 00. 00. 1 RIVET ...................... o.49 RIVET ... 00........ 0....... 00. 11 (BEFORE SN11701) HEAD/SICKLE ............... 00.1 CLAMP ......................... 1 CS 7/16X1-3/4 (N) ............. 1

Part Name

Qty. Req.

SICKLE W/HEAD .. 000 .. 0.0 ...... 1 (TOP SERRATED) (BEFORE SN 11701) SICKLE W/HEAD . 0......... o.... 1 (UNDER SERRATED) (BEFORE SN 11701) SECTION/END RT ............... 1 (UNDER SERRATED) SECTION/END RT ........ 0.. 0... 1 (TOP SERRATED) (AFTER SN 11700) SECTION/END LT ................ 1 (UNDER SERRATED) SECTION/END LT ................ 1 (TOP SERRATED) (AFTER SN11700) SCREW/#12 SERR 7/8 GR8(LN) AR SCREW/#12 SERR 5/8 GR8(LN) AR (AFTER SN 11700) GUARD/SPECIAL DRIVE END .... 1

a)

For box of (25) Under Serrated Sections, order 083486. b) For box of (25) Top Serrated Sections, order 083597. c) For box of (25) Right Half Sections, order 083598. d) For box of (25) Left Half Sections, order 083599. e) For 1 Ib box of Rivets, order 640007. f) For 1 Ib box of Rivets, order 640010. g) For box of (10) Right Half Sections, order 091570. h) For box of (10) Right Half Sections, order 091126. i) For box of (10) Left Half Sections, order 091569. j) For box of (10) Left Half Sections, order 091125. k) For box of (25) Screws W/Nuts, order 090052.

I) For box of (50) Screws W/Nuts, order 090095. m) For box of (25) Chrome Under Serrated Sections, order 060737. n) For box of (25) Chrome Over Serrated Sections, order 600190.

0) For replacement order 126320.

CONVERSION KITS:

For Conversion Kit to install Regular Guards on 2140, order 088741.

For Conversion Kit to install Stub Guards on 2140, order 088742.

25

906305/1 P192

MC2170 • SICKLE & GUARDS

STUB GUARDS

REGULAR GUARDS

906305/1 P192

26

Printed In U.S.A.

MC2170 - SICKLE & GUARDS Ref. No.

Part No.

01 110-32405 02 110-32342 650495 650527 650791 650834 03 126320 091389 q

110-32336q 04 05 06 07

08 09 10 11 12 13 14

110-32323 360-32359 110-32410 110-32330 650453 650791 650834 030-31887 097995 110-32409 110-32334 110-32341 110-10655 360-32404 110-32349 090620

340-32063

090692

082980

15

H7547A a 124737 p 340-32015b 060635 m 050056 n

16 340-16454 c 340-16455d 071390 e 071393f 17 110-32316 18 390-16339 651113

Printed In U.S.A.

Part Name

Ref. No.

Qty. Req.

Part No.

19 246-26188 0

GUARD/SPECIAL DRIVE END .... 1 GUARD/SICKLE HVY DUTy ..... 18 CS 1/2X1-1/4 (N) ............... 2 CS 1/2X1-1/4 (N) .............. 31 CS 1/2X1-3/4 (N) ............... 2 CS 1/2X1-1/2 (N) ............... 3 CLiP/HOLDDOWN ............... 8 (AFTER SN24000) CLiP/HOLDDOWN ............... 8 (BEFORE SN24001 & AFTER SN22200) CLiP/HOLD-DOWN .............. 8 (BEFORE SN22201) CLIP/HOLD-DOWN .............. 1 SHIM 118 ......................AR GUARD/SPECIAL RT ............ 1 GUARD/STUB .................. 17 CS 1/2XH/2 (N) ............... 2 CB 1/2X1-3/4 (N) ............... 4 CB 1/2X1-1/2 (N) ............... 2 CB 1/2X2-1/2 (N,LN) .......... 27 CB 1/2X2-3/4 .................. 3 GUARD/SICKLE ................. 1 HOLD-DOWN/STUB GUARD .... 16 HOLD-DOWN/CLlP .............. 2 SHIM 1/32 .....................AR SHIM 3/16 ..................... 17 CLiP/ADJUSTMENT ............ 32 SICKLE W/O HEAD (BOLT ON) ... 1 (UNDER SERRATED) (AFTER SN22200) SICKLE W/O HEAD .............. 1 (UNDER SERRATED) (BEFORE SN22201) SICKLE W/O HEAD (BOLT ON) ... 1 (TOP SERRATED) (AFTER SN22200) SICKLE W/O HEAD .............. 1 (TOP SERRATED) (BEFORE SN22201) SECTION/UNDER SERRATED ..AR SECTION/TOP SERRATED .....AR (AFTER SN24000) SECTION/TOP SERRATED .....AR (BEFORE SN24001) SECTION/UNDER SERRATED ..AR (CHROMED) SECTION/OVER SERRATED ....AR (CHROMED) SECTION/HALF RH .............. 1 SECTION/HALF LH .............. 1 RiVET ......................... 67 RIVET ......................... 11 HEAD/SICKLE .................. 1 CLAMP ......................... 1 CS 7/16X1-3/4 (N) ............. 1

083730 0

20

091382 g 091572h

21

0913831 091571J

091384k 0913851

Part Name

Qty. Req.

SICKLE W/HEAD ................ 1 (UNDER SERRATED) (BEFORE SN22201) SICKLE W/HEAD ................ 1 (TOP SERRATED) (BEFORE SN22201) SECTION/END RT ............... 1 (UNDER SERRATED) SECTION/END RT ............... 1 (TOP SERRATED) (AFTER SN22200) SECTION/END LT ................ 1 (UNDER SERRATED) SECTION/END LT ................ 1 (TOP SERRATED) (AFTER SN22200) SCREW/#12 SERR 7/8 GR8(LN) AR SCREW/#12 SERR 5/8 GR8(LN) AR (AFTER SN22200)

a)

For box of (25) Under Serrated Sections, order 083486. b) For box of (25) Top Serrated Sections, order 083597. c) For box of (25) Right Half Sections, Nder 083598. d) For box of (25) Left Half Sections, order 083599. e) For 1 Ib box of Rivets, order 640007. f) For 1 Ib box of Rivets, order 640010. g) For box of (10) Right Half Sections, order 091570. h) For box of (10) Right Half Sections, order 091126.

I) For box of (10) Left Half Sections, order 091569. j) For box of (10) Left Half Sections, order 091125. k) For box of (25) Screws W/Nuts, order 090052.

I) For box of (50) Screws W/Nuts, order 090095. m) For box of (25) 'Chrome Under Serrated Sections, order 060737. n) For box of (25) Chrome Over Serrated Sections, order 600190.

0) Not available as a Service Part. Order Sickle and Head seperately. p) For box of (25) Top Serrated Sections, order 126300. q) For replacement order 126320.

CONVERSION KITS:

For Conversion Kit to install Regular Guards on 2170, order 088743.

For Conversion Kit to install Stub Guards on 2170, order 190-32585.

27

906305/1 P192

MC2140/2170 - PTO TOWER (AFTER SN11700-2140 & SN22200-2170)

Ref. No.

Part No.

01

126339 061685 520093 520092 124484 650704 094154

03 04 05 06

091372

07

094134 a 651240

091378 650858

906305/1 P192

Qty. Req.

Ref. No.

Part No.

SHIELDIDRIVELINE (INCL 18) . . . 1 CB 3/8Xl-3/4 (LN,2P) ... . . . .... 3 LOCK/COLLAR . ... . ......... . . .. 1 BEARING/BALL . . . .... .. .... . ... 1 FLANGETTE ......... . .......... 2 CB 3/8Xl (N,L) . . .. . .. . .. .. . . . .. 3 DRIVE/UNIVESAL ASSMD . ..... . 1 (AFTER SN12300-2140 & SN23501-2170) JOINT/UNIV W/SHAFT .. . ... . ... . 1 (BEFORE SN12300-2140 & SN23501-2170) JOINT .. .. ... . ............. . . . .. 1 CS 1/2X3 GR8 (N,L) .... . . .. . . . . 2 (AFTER SN12300-2140 & SN23501 - 2170) JOINT/SPLINED . . ...... . .... . .. . 1 CS 1/2Xl-l/2 NF (L) ...... .. . . .. 1 (BEFORE SN 12300-2140 & SN23501-2170)

08 09 10 11 12 13 14 15 16 17

091377 510114 091373 510100 510223 091374 084242 091376 092015 094155

Part Name

0913 75

18 a)

28

126342

Part Name

Qty. Req.

HOUSING/CENTER ASSY .. ...... 1 KIT/CENTER CROSS .. .. .... ... .. 2 YOKE & SHAFT ..... .. ........ . .. 1 RETAINER/BEARING ... . .. .. .. . . 4 BEARING/NyLON ... . ... . ....... . 1 SHIELD/OUTER .. .. .... ......... 1 BEARING/CENTRALIZER .. .. . .... 1 SHIELD/TUBE END .. ........ .... 1 BEARING/NyLON . ...... .. ..... . . 1 STUB/PLUG W/TUBE .... ........ 1 (AFTER SN12300-2140 & SN23501-2170) STUB/PLUG W/TUBE ...... ...... 1 (BEFORE SN 12300-2140 & SN23501-2170) FLAP .. . .... ..... .. . . . ... . . . . . .. . 1

Contained in Kit 094137

Printed In U.S.A.

MC2140/2170 - PTO TOWER WITH 092009 CV JOINT KIT

(BEFORE SN11701-2140 & SN22201-2170)

2 11

1bbb

Ref. No.

Part No.

01

126339 061685 124484 650704 520093 520092 092012 092013 650858 091377 510114

02 03 04 06 07 oa 09

Printed In U.S.A.

aty.

Req.

Ref. No.

Part No.

SHIELD/DRIVELINE (INCL 19) ... 1 CB 3/aX1-3/4 (LN,2P,N,L) ...... 3 FLANGETTE .................... 2 CB 3/aX1 (N,L) ................. 3 LOCK/COLLAR .................. 1 BEARING/BALL ................. 1 JOINT/UNIV W/SHAFT .......... 1 YOKE/KEYED ................... 1 CS 1/2XH/2 (L) ............... 1 HOUSING/CENTER ASSY ........ 1 KIT/CENTER CROSS ............ 2

10 11 12 13 14 15 16 17 18 19

091373 510100 510023 091374 084242 091376 092015 091375 oa6924 126342

Part Name

29

Qty.

Part Name

Req.

YOKE & SHAFT .................. 1 RETAINER/BEARING ........... -.4 BEARING/NYLON ................ 1 SHIELD/OUTER ................. 1 BEARING/CENTRALIZER ......... 1 SHIELD/TUBE END .............. 1 BEARING/NyLON ................ 1 STUB/PLUG W/TUBE ............ 1 YOKE/SPRING LOCK ASSY ...... 1 FLAP ............................ 1

90630511 P192

MC2140/2170 • PTO TOWER (BEFORE SN11701·2140 & SN22201.2170)

7

Ref. No.

Part No.

330 -33302 650954 02 040-33368 650453 520090 03 04 010-31091 a 650786 06 250-32511 07 250-32512 650585 045327 08 09 320-32579 01

906305/1 P192

Part Name

Qty. Req.

Ref. No.

Part No.

047524 10 047523 11 12 330-33300 510202 13 14 330-33299 15 320-32580 655537 16 250-32510 655537 17

SHIELD/PTO ........... ......... 1 THMS 3/8X1 (N,L) .............. 2 TOWER/PTO WLDMT ..... ....... 1 CS 1/2X1-1/2 (N,L) ............. 2 LOCK/COLLAR . .... . . ........... 1 BEARING/FLANGED ............. 1 CB 3/8X1-1/4 (N,L) .......... ... 3 PTO/FEMALE HALF ASSY ...... . 1 YOKE .......................... 1 CS 1/2X2 (LN) ................. 1 KIT/CENTER CROSS ............ 1 PTO/FEMALE TUBE ASSY ....... 1

a)

30

Qty. Req.

Part Name

BEARING/RETAINER ........... .4 BEARING/NYLON ................ 2 PTOIINNER GUARD ............. 1 BEARINGINYLON ............... . 1 PTO/OUTER GUARD ......... .. .. 1 PTO/MALE SHAFT ASSY . .. ...... 1 KEY/WDRF 5/16X1-1/4 .......... 1 PTO/MALE HALF ASSY ...... .. .. 1 KEY/WDRF 5/16X1-1/4 ........... 1

For Bearing only, order 010-10042

Printed In U.S.A.

MC2140/2170 - TELESCOPING DRIVE (TOWER TO TRACTOR)

(AFTER SN11700-2140 & SN22200-2170)

Tractor End

Tower End

No.

Part No.

01

094157

Ref.

091379

02 094142 510114 03 04 320-32615 05 510100 510023 06 089207 07

Printed In U.S.A.

Part Name

Qty.

Ref.

Req.

No.

Part No.

089960 08 09 320-32616 089205 10 086928 11 086927 12 086926 13 14 350-32485 089286 15 16 086931 084242 17 18 086930

JOINT/UNIV W/TUBE ............ 1 (AFTER SN12300-2140 & SN23501-2170) JOINT/UNIVERSAL W/TUBE ..... 1 (BEFORE SN 12300-2140 & SN23501-2170) YOKE/SPRING LOCK ASSY .. , ... 1 KIT/CENTER CROSS ............ 2 YOKE/TUBE ASSY .............. 1 RETAINER/BEARING ............ 4 BEARINGINYLON ............... 2 GUARDIINNER ASSY ............ 1

31

Qty.

Part Name

Req.

GUARD/OUTER .................. 1 YOKE/SHAFT ASSY .............. 1 YOKE/QUIK-LOCK ASSY ......... 1 BALL/STAINLESS 3/8 ............5 SPRING ............ , ............ 2 COLLAR ASSY .................. 2 RING/RETAINING ................ 2 DRIVE/MALE HALF ASSY ........ 1 WASHER ........................ 2 CENTRALIZER .................. 1 COVER ......................... 1

906305/1 P192

MC2140/2170 - TELESCOPING DRIVE {TOWER TO TRACTOR)

(BEFORE SN11701-2140 & SN22201-2170)

Tractor End

Ref. No.

Part No.

089287 01 02 250-10052 03 510114 04 320-32615 05 510100 06 510023 089207 07 089960 08 09 320-32616

906305/1 P192

Part Name

Qty. Req.

Ref. No.

Part No.

089205 10 11 086928 12 086927 13 086926 14 350-32485 15 089286 086931 16 084242 17 086930 18

DRIVE/FEMALE HALF ASSY .. .. . 1 YOKE/END ...................... 1 KIT/CENTER CROSS .. ...... . ... 2 YOKE/TUBE ASSY .............. 1 RETAINER/BEARING ... . ... ... .. 4 BEARINGINYLON .. .... ..... .... 2 GUARD/INNER ASSY .. . . . ....... 1 GUARD/OUTER ....... .. ... . . ... 1 YOKE/SHAFT ASSY .......... . .. 1

32

Part Name

Qty. Req.

YOKE/QUIK-LOCK ASSY ... .... .. 1 BALL/STAINLESS 3/8 ............ 2 SPRING ................... ... ... 1 COLLAR ASSY ............... . .. 1 RING/RETAINING .... ..... .. .... . 1 DRIVE/MALE HALF ASSY . .. ..... 1 WASHER ..... .. ................. 1 CENTRALIZER . ...... . ... . . . . ... 1 COVER . .. ... ................... 1

Printed In U.S.A.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _MC2140/2170 - HITCHJACKS

071119

Hitchjack· Hammerblow

e

(~.~4

2 t-----;

~1J;

llV

Ref. No.

Part No.

01 02 03 04 05

071119 061276 061293 061294 061295 0712728

a)

3

Qty. Req.

Part Name

HITCHJACK-HAMMERBl.,OW ..... 1 PIN & CHAINiASSY ............. 1 TUBE/JACK-INSIDE ............. 1 TUBE/JACK-OUTSiDE ........... 1 CRANK/JACK ................... 1 KIT/JACK SERVICE ............. 1

Includes Tube Cap, Grease Fitting, Grommet, Thrust Bearing, Thrust Washer, Ball & Cage, Felt Spacer, Support Washer, (2) Shaft Bushings, (2) Bevel Gears & (2) Spring Pins

071119 & 088841 Hitchjacks· Wesbar Ref. No.

Part No. 071119 8

01 02 03 04 05 06 07 08

4

061276 077840 077841 077837 077838 077839 077836 094283 088841b

01 02 03 04 05 06 07 08 a)

b)

Printed In U.S.A.

33

061276 081462 092021 081463 077838 077839 077836 094283

Qty. Req.

Part Name

HITCHJACK-WESBAR ............ 1 CONSISTS OF PIN & CHAIN/ASSY .............. 1 TUBE/JACK-INSI DE .............. 1 TUBE/JACK-OUTSIDE ........... 1 CRANK/JACK & NUT ............. 1 CAP/TOP ........................ 1 SHAFT/CROSS .................. 1 KIT/GEAR ....................... 1 KITIINTERNAL PARTS ........... 1 HITCHJACK-WESBAR ............ 1 CONSISTS OF PIN & CHAIN/ASSY .............. 1 TUBE/JACK-INNER .............. 1 TUBE/JACK-OUTER ............. 1 CRANK/JACK & NUT ............. 1 CAP/TOP ........................ 1 SHAFT/CROSS .................. 1 KIT/GEAR ....................... 1 KITIINTERNAL PARTS ........... 1

10· Travel (17.5 overall retracted height) 15" Travel (23.8 overall retracted height)

906305/1 P192

MC2140/2170 • OPTIONS

805321 (2140) & 803564 (2170)

Mechanical Tongue Posltloners

Ref. No.

Part No.

124477 200-32511 02 220 -32529 076099

01

906305/1 P192

Part Name

Ref. No.

Qty. Req.

Part No.

03 380-10448 04 090 -32306 650491 650533 05 040644 124478 06 480-42010

POSITIONER/ASSY MECH (2140) 1 POSITIONER/ASSY MECH (2170) 1 PIN/CYLINDER ............... . .. 2 COTTER/HAIR PiN ............. 4

34

Part Name

Qty. Req.

SPRING/EXTENSION .... .. ...... 1 HANDLE ... . ...... . . ...... . .. . .. 1 CS 3/8X1-1/4 (LN) . ... . ... .... . . 1 CS 3/8X1-1/2 (LN) .... .. . .... .. . 1 CORD . . ... ..... ... .. . .. . ... . . ... 1 CLEVIS/INSIDE ASSY (2140) ... . . 1 CLEVIS WLDMNT , INSIDE (2170) .1

Printed In U.S.A.

MC2140/2170 - OPTIONS

803565 Hydraulic Tongue Positioner

Ref. No.

Part No. 803565b

01 02 03 04 05 06

170-33762 390-32661 170-33767 390-32660 170-32999 580116

Printed In U.S.A.

Part Name

Ref. No.

Qty. Req.

POSITIONER/HYD TONGUE ..... 1 CONSISTS OF: HOSE/ASSY .................... 2 CLIP ........................... 1 LlNE/HYD ASSY ................ 2 CLIP/HOSE ... " ................ 5 HOSE/HYDRAULIC .............. 2 UNION/90 SWIVEL ADAPTER .... 2

Part No.

07 170-33175 08 083357a 09 040-33352 10 066452 11 060629 12 060471 a) b)

35

Part Name

Qty. Req.

PLATE/ORIFiCE ................. 1 CyLINDER/HyDRAULIC .......... 1 LOCK/CYLINDER ................1 PiN/LOCK ....................... 1 PiN/LOCK .......................2 PIN/KLIK ........................2

ForSeaIKn.o~er084159

For Replacement order 804861

906305/1 P192

MC2140/2170 - OPTIONS 804861 Hydraulic Tongue Positioner

Ref. No.

Part No. 804861

01 097597 02 097860 03 580116 04 170-33175 05 083357a

906305/1 P192

Oty. Part Name

Ref. No.

Req.

POSITIONER/HYD TONGUE .. . . . 1 CONSISTS OF : HOSE/ASSY ... ... . .. . . . .. .. . . .. 2 CLAMP/HOSE DOUBLE .... . . .. . . 7 UNION/90 SWIVEL ADAPTER .. .. 2 PLATE/ORIFICE . .. ... ... .. . . . . . . 1 CYLINDER/HYDRAULlC . .. . . . .. . 1

Part No.

06 040 -33352 066452 07 08 097918 09 076099 a) b)

36

Qty. Part Name

Req.

LOCK/CyLINDER . . ............ . . 1 PIN/LOCK . . . .. . .. . .... ... ... . . . . 1 PiN/CyLINDER .. .. . ... . . ... .. ... 2 COTTER/HAIR PIN ...... . . . .. . ... 4

For Seal Kit, order 084159 For Replacement order 066452

Printed In U.S.A.

MC2140/2170 - OPTIONS

803587 Center Skid Shoes (2170 Before SN22801-2170) 804681 Center Skid Shoe (2140 & 2170 After SN22800-2170)

7 I

S

803586 Cutter Bar Wear Plate (2170 Before SN22801-2170) 804892 (2140 After SN12000-2140) 804891 (2170 After SN22800-2170)

Ref. No.

Part No.

01 02 03 04 05 06

220-32528 076099 330-33296 a 390-32656b 390-32659b 360-32514

Part Name

Ref. No.

Qty. Req.

Part No.

07 330-33303 650791

PIN ............................. 1 COTTER/HAIR PiN .............. 1 SHOE/SKID ASSV ............... 1 CLIP/SKID SHOE ................ 3 CLIP/STUB GUARD ............. 3 SPACER/STUB GUARD .......... 1

330-33424 650791 650834 089767 650791

a) b)

Printed In U.S.A.

37

Part Name

Qty. Req.

PLATE/WEAR ASSV ............. 1 CB 1/2X1-3/4 .................. .4 (BEFORE SN22801-2170) PLATE/WEAR ASSY ............. 1 CB 1I2X1-3/4 ...................2 CB 1/2X1-1/2 ...................2 (AFTER SN12000-2140) PLATE/WEAR ASSY .............2 CB 1/2X1-3/4 ...................8 (AFTER SN22800-2170)

Unit is equipped with (2) Skid Shoes as standard equipment For replacement order 097997

906305/1 P192

MC2140/2170 • OPTIONS

803584 Tall Crop Divider

Ref. No. 01

Part

No. 290-32472 650731

Part Name

Qty. Req.

DIVIDER/TALL CROP . . .. ...... .. 1 CS 3/8X3-1/2 (N,L) . . ... . ....... 2

803588 Narrow Windrow Guides (Before SN12001-2140 & SN22801-2170)

2

Ref. No. 01

No.

330-33305 650687 a 650953 02 330-33304 6506878 650953 a)

90630511 P192

38

Qty. Req.

Part Part Name

GUiDE/RIGHT . .. ..... . ..... . .... 1 CB 5/16X3/4 .... .. .... . ...... . .. 2 THMS 3/8X3/4 (FLN) ....... . .... 1 GUIDE/LEFT .... ... .......... .. . 1 CB 5/16X3/4 ... ............. .... 2 THMS 3/aX3/4 (FLN) . .. .... .. ... 1

Hex Nut from unit required (Not Illustrated) Printed In U.S.A.

NUMERICAL INDEX Part No.

Page Ref. No. No.

6H 154 H7547A H7547A 004146 004942

15 25 27 17 15

07 15 15 01 03

020000 027003 027003

20 23

06 03

040000 040644 042162 042163 044090 044090 044965 045327 045582 046000 046001 047523 047524 048182 048967 048967 049038

34 14 14 18 19 17 30 14 14 14 30 30 23 04 05 07

05 03 02 14 24 02 08 12 13 14 11 10 12 13 12 35

050000 050056 050056 054031 054848 056640 056773 056773 059743 059743

25 27 23 09 18 04 05 04 05

15 15 29 15 15 04 04 12 11

060000 060471 060629 060635 060635 061276 061276 061293 061294 061295 065180 066452 066452 066717 068642 068938

35 35 25 27 33 33 33 33 33 09 35 36 14 13 08

12 21 15 15 01 01 02 03 04 10 10 07 09 12 15

070000 070856 071119

Printed In U.S.A.

07 04

19 11

Part No.

Page Ref. No. No.

071119 071119 071119 071272 072624 076099 076099 076159 076586 076588 076958 076958 077031 077601 077601 077836 077837 077838 077839 077840 077841 078580 079716 079923

05 33 33 33 14 36 37 23 14 23 10 11 21 18 19 33 33 33 33 33 33 13 14 13

10

082827 082980 082984 083357 083357 083397 083689 083690 083729 083730 084242 084242 084242 084242 084595 086924 086926 086926 086927 086927 086928 086928 086930 086930 086931 086931 087362 087756 087756 087758 087758 088739 088841 088841 089131 089133 089134 089205 089205 089207 089207 089262 089286 089286 089287 089767 089867 089871 089872 089872 089960 089960

05 06 09 02 23 11 19 07 07 17 03 03 07 04 05 06 02 03 11 01 13

080000 080795 081377 081462 081463 082603 082603 082604 082620 082621 082623 082679 082682 082685 082687 082688 082694 082697 082697 082699 082701 082705 082712 082712 082714 082717 082720 082720 082723 082724

14 07 33 33 07 09 09 07 07 07 25 23 23 23 23 13 10 11 13 07 13 10 11 11 11 10 11 13 25

Page Ref. No. No.

Part No.

04 13 02 04 21 13 02 22 32 22 14 25 25 21 01 08 02 02 17 02 21 14 14 13 12 01 01 07 01

25 27 13 35 36 13 11 11 25 27 28 29 31 32 16 29 31 32 31 32 31 32 31 32 31 32 19 04 05 04 05 25 04 33 16 16 16 31 32 31 32 19 31 32 32 37 18 18 18 19 31 32

19 14 09 08 05 20 16 15 19 19 14

14 17 17 06 18 13 13 12 12 11 11 18 18 16 16 09 07 07 06 06 14

11 18 03 21 10 10 07 07 05 15 15 01 07 13 02 04 02 08 08

090000 090006

39

08

11

Part No.

090086 090086 090087 090088 090089 090090 090091 090092 090093 090094 090096 090097 090098 090099 090493 090494 090495 090496 090580 090584 090620 090655 090673 090674 090692 090706 090760 090770 090796 090871 090871 090938 090939 090941 090943 090947 090949 091372 091373 091373 091374 091374 091375 091375 091376 091376 091377 091377 091378 091379 091382 091382 091383 091383

Page Ref. No. No.

15 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 25 08 27 25 08 08 27 19 19 23 23 07 08 23 23 23 04 13 15 28 28 29 28 29 28 29 28 29 28 29 28 31 25 27 25 27

24 01 02 04 05 07 08 09 10 12 13 14 15 16 17 19 20 14

02 14 14 14 11 14 13 08 25 25 21 13 01 25 25 02 09 26 06 10 10 13 13 17 17 15 15 08 08 07 01 20 20 21 21

906305/1 P192

NUMERICAL INDEX Part No.

Page Ref. No. No.

091389 25 091389 27 091571 25 091571 27 091572 25 091572 27 091870 14 092012 29 092013 29 092015 28 092015 29 092021 33 092201 10 092204 10 092207 10 092208 10 092406 10 093509 19 094134 28 094142 31 094154 28 094155 28 094157 31 094283 33 097332 10 097333 10 097334 10 097335 10 097407 07 097596 04 097596 08 097597 36 097598 10 097599 10 097600 10 097601 10 097772 07 097775 04 097827 13 097828 13 097857 13 097859 04 097859 08 097860 36 097918 36 098032 20 098235 21 098237 21 110000 111377 07 115726 19 115727 19 117085 07 117085 08

906305/1 P192

04 03 21 21 20 20 04 06 07 16 16 03 20 20 21 21 22 17 07 02 06 17 01 08 13 13 13 13 02 08 14 01 16 15 16 15 02 02 15 21 21 05 10 02 08 01 06 19 36 22 23 21 13

Part No.

Page Ref. No. No.

117086 08 120000 124127 04 124127 08 124128 08 124129 08 124190 19 124195 19 124466 18 124466 19 124472 15 124477 34 124478 34 124484 28 124484 29 124737 27 125155 18 125155 19 125882 07 125883 07 126259 19 126297 21 126320 27 126339 28 126339 29 126341 15 126342 15 126342 28 126342 29 500000 500076 20 500178 19 510023 29 510023 31 510023 32 510100 28 510100 29 510100 31 510100 32 510114 28 510114 29 510114 31 510114 32 510202 30 510223 28 520033 17 520054 14 520065 20 520065 23 520085 20 520085 23 520090 30 520092 28 520092 29

Part No.

02

Page Ref. No. No.

520093 21 520093 28 520093 29 520159 15 520195 18 520195 19 520201 14 520204 17 520205 21 520206 21 550041 14 580116 35 580116 36 600000 600324 17 600759 17 610748 13 650977 23 653102 14 654006 21 655018 10 655018 11 655537 17 655537 30 660033 17 800000 803098 04 803098 05 803564 34 803565 35 803584 38 803586 37 803587 37 803588 38 804681 37 804861 36 804891 37 804892 37 805321 34 010-00000 010-31091 30 010-32301 23 010-32322 18 010-32388 23 010-32392 15 020-00000 020-32214 15 020-32215 23 030-00000 030-13498 23 030-17662 07 030-17662 08 030-17662 09 030-31888 23

08 14 11 11 20 13 06 18 28 01 06 05 02 15 16 25 37 38 22 21 03 01 01 26 12 18 19 11 08 12 06 06 11 11 05 05 09 09 03 03 13 12 03 07 08 04 07 02 03 04 04

40

05 03 03 25 12 21 08 04 10 11 05 06 03 05 02 10 28 10 18 03 03 22 17 11 14 13

04 27 01 27 01 06 09 16 03 01 01 11

Part No.

Page Ref. No. No.

030-31904 07 030-31906 19 030-31908 21 040-00000 040-33323 05 040-33324 05 040-33325 07 040-33350 15 040-33351 23 040-33352 35 040-33352 36 040-33368 30 045-31361 18 045-31361 19 045-31395 15 045-31396 15 045-31404 10 045-31404 11 045-31406 07 045-31407 07 045-31417 15 090-00000 090-32297 10 090-32297 11 090-32306 34 110-00000 110-10655 25 110-10655 27 110-32316 25 110-32316 27 110-32323 25 110-32323 27 110-32330 25 110-32330 27 110-32334 25 110-32334 27 110-32336 25 110-32336 27 110-32341 25 110-32341 27 110-32342 25 110-32342 27 110-32349 25 110-32349 27 110-32354 23 110-32405 25 110-32405 27 110-32409 25 110-32409 27 110-32410 27 110-32416 23 120-32764 07 120-32769 05 120-32773 23

12 20 14 07 06 29 15 05 09 06 02 06 18 04 20 23 20 20 05 07 06 06 04 11 11 17 17

05 04 07 07 09 09 04 03 10 10 03 02 13 13 31 22 01 08 08 06 21 02 02 01

I

Printed In U.S.A.

NUMERICAL INDEX Part

Page Ref.

Part

Page Ref.

No.

No.

Part

Page Ref.

Part

Page Ref.

No.

No.

No.

No.

No.

No.

No.

No.

No.

120-32774 23 130-13131 17 140-32176 17 140-32240 17 160-32163 17 160-32210 17 160-32361 23 160-32632 11 160-32633 11 160-32646 19 160-32707 23 170-32999 35 170-33175 35 170-33175 36 170-33762 04 170-33762 05 170-33762 35 170-33767 04 170-33767 05 170-33767 35 170-33772 09 170-33776 09 180-10194 17 180-10909 15 180-10909 23 180-13696 19 180-21917 19 180-32134 17 200-00000 200-32366 21 200-32448 21 200-32504 07 200-32505 07 200-32506 07 200-32507 07 200-32509 23 200-32511 34 210-19533 23 210-31017 23 210-32045 17 220-16199 13 220-18200 10 220-18200 11 220-19812 20 220-21516 15 220-32513 10 220-32513 11 220-32514 04 220-32514 05 220-32515 07 220-32516 07 220-32517 07 220-32518 08 220-32518 09

17 14 17 15 12 08 26 16 15 01 26 05 07 04 09 08 01 10 09 03 14 11 07 09 08 10 07 21

07 07 37 34 23 17 17 17 13 21 08 09 18 19 15 21 23 07 27 32 15 07 30 30 30 15 17 15 23 15 15 21 20 10

31 23 01 02 32 09 18 10 17 06 04 04 05 13 08 09 14 18 19 02 13 09 16 06 07 24

31 32 31 32 17 10 11 11 11 10 11 04 05 07 13 13 37 13 30 30 13 30 37 38 38 37 17 17 25 27 25 27 25 27 27 15 31 32 21 15 25 27 25 27 07 07 18 19 18 19 20 20 15 15

04 04 09 09 06 14 14 12 13 01 01 01 01 07 06 15 03 14 14 12 01 01 07 02 01 07 16 19 16 16 16 16 15 15 14 27 14 14 12 10 06 05 12 12 06 04 10 11

Printed In U.S.A.

08 16 24 27 08 11

15 01 20 30 13 04 11 11

05 11 09 09 03 03 30 01 14 08 08

220-32519 220-32520 220-32528 220-32529 220-32566 230-24034 230-27194 230-32183 230-32500 240-31990 240-32029 240-32029 240-32032 240-32033 240-32034 240-32035 240-32036 240-32043 246-26188 250-10052 250-19364 250-32506 250-32510 250-32511 250-32512 250-32571 250-32571 260-25753 260-32251 260-32252 260-32253 260-32253 260-32265 290-32461 290-32461 290-32462 290-32462 290-32468 290-32469 290-32470 290-32471 290-32472

11

10 11

15 23 23 13 38

320-32615 320-32615 320-32616 320-32616 320-32632 330-33259 330-33259 330-33260 330-33261 330-33262 330-33262 330-33269 330-33269 330-33279 330-33283 330-33284 330-33296 330-33297 330-33299 330-33300 330-33301 330-33302 330-33303 330-33304 330-33305 330-33424 335-32129 335-32189 340-16454 340-16454 340-16455 340-16455 340-32015 340-32015 340-32063 350-32475 350-32485 350-32485 360-14855 360-21711 360-32359 360-32359 360-32404 360-32404 360-32499 360-32500 360-32503 360-32503 360-32504 360-32504 360-32505 360-32506 360-32507 360-32508

19 07 05 18 01 01 02 02 04 04 14 25 25 02 01

300-00000 300-31918 300-31919 310-16296 310-32513 310-32513 310-32513 310-32515 320-32577 320-32578 320-32579 320-32580

13 13 23 07 08 09 19 17 20 30 30

07 08 22 15 07 07 16 20 04 09 15

41

11

12 02 09 21 22

360-32509 15 360-32510 21 360-32511 21 360-32512 15 360-32513 23 360-32514 37 360-32520 21 370-18061 20 370-32100 19 370-32112 19 370-32113 20 370-32142 15 380-10448 34 380-14677 23 380-25728 15 380-32342 07 380-32348 10 380-32348 11 380-32348 13 380-32350 07 380-32351 08 380-32351 09 380-32354 18 380-32354 19 385-27865 07 385-27865 18 385-27865 19 390-16339 21 390-16339 25 390-16339 27 390-21979 05 390-32585 21 390-32643 10 390-32643 11 390-32656 37 390-32657 23 390-32658 13 390-32659 37 390-32660 35 390-32661 35 390-32696 10 390-32696 11 390-32703 23 400-00000 400-10627 23 400-15947 21 400-18916 10 400-18916 11 400-20466 15 400-21904 07 400-32443 08 400-32443 09 400-32443 10 400-32443 10

23 13 15 16 13 06 15 10 05 09 03 02 03 10 17 28 10 10 19 10 03 03 08 14 33 09 15 07 18 18 05 07 08 08 04 06 18 05 04 02 17 17

18 24 20 18 18 07 25 09 09 01 03

906305/1 P192

NUMERICAL INDEX Part

Page Ref.

Part

Page Ref.

Part

Page Ref.

Part

Page Ref.

No.

No.

No.

No.

No.

No.

No.

No.

No.

11 11 19 19 10 11 13 08 09 10 11 13 13 13 13 13 07 07 08 09 18 19 34 07

01 03 06 04 05 05 03 12 12 19 19 16 22 24 23 05 16 26 06 06 07 19 06 34

400-32443 400-32443 400-32447 410-32402 420-30377 420-30377 420-30377 420-33066 420-33066 420-33903 420-33903 420-34436 420-34437 420-34438 420-34447 420-34448 480-27676 480-27676 480-27676 480-27676 480-27676 480-27676 480-42010 480-42349

906305/1 P192

No.

42

No.

No.

Printed In U.S.A.

Notes

Printed In U.S.A.

43

906305/1 P192

Notes

906305/1 P192

44

Printed In U.S.A.

TORQUE SPECIFICATIONS FOR STANDARD MACHINE HARDWARE All Torque Values are In Ft-Lbs unless otherwise stated.

(Multiply In-Lb value* by 0.113 or Ft-Lb value by 1.355 to obtain metric Nm value.)

GR.5

GR.2

Bolt Size

Lub.

Dry

GR.8 Lub.

Dry

Lub.

* In·Lb

NOTE: These torque values are to be used for all GEHL hardware excluding: Locknuts, Self-tapping Screws, Thread Forming Screws and Sheet Metal Screws. Unless otherwise specified, all torque values must meet this speCification.

Attaching Hardware Table Size & Part Description Number

Size & Part Description Number

Size & Description

Part

#6 L #6-32 N #6 P #10 L #10-24 N #10-32 N #10 P 1/4 L 1/4 NF-N 1/4 NILN 1/4 P

5/16 IN 5/16 L 5/16NF-JN 5/16 NF-N 5/16 NILN 5/16 P 3/8 L 3/8 N 3/8 NF-JN 3/8 NF-N 3/8 NILN

3/8 P 7/16 L 7/16 NF-N 7/16 P 1/2 L 1/2 LN 1/2 N 112 NF-JN 1/2NF-NILN 1/2 NILN 1/2 P

654006 654028 653016 654046 654030 071706 653018 653045 064373 068034 654009

654044 650658 650848 650549 650550 650648 654017 654022 650546 071401 654002

653034 654024 653036 651062 064260 654004 654026 653010 653039 650552 067847

Number

Size & Description

Part

5/8JN 5/8 L 5/8 N 5/8 NILN 5/8 P 3/4 NF-SN 3/4 NILN 3/4 P 1-1/4 NF-SN

653047 654032 653021 067823 654012 6531 19 079209 654014 650964

Number

METRIC M5/.8 N

656100

FARM EQUIPMENT GEHL COMPANY

Printed In U.S.A.

\NEST BEND, \NISCDNSIN 53095 U.S.A .

e GEHL Company 1992

906305/1 P192