Gehl Mower Conditioner MC2175 Service Parts Manual - PDF DOWNLOAD

Form No.

2175

906693



Mower Conditioner

SERVICE PARTS MANUAL

Introduction When ordering service parts, specify the correct part number, full description, quantity required, the unit model number and serial number.

The Mower Conditioner model and serial number is on a plate located on the left side of the Swing Frame at the Steering Post Pivot. ”Right” and ”left” are determined from a position standing behind the Mower Conditioner. From this position, the Drawbar and Positioner are on the ”left” side.

GEHL Company reserves the right to make changes or improvements in the design or construction of any part of the unit without incurring the obligation to install such changes on any previously delivered units.

NOTE:

On original tire replacement, company policy prohibits the sale of replacement tires for all GEHL machinery. Replacement Wheel Sets are available and tire size information is called out with the Wheel Sets to facilitate replacement tire selection. ALL REPLACEMENT TIRES MUST BE PURCHASED LOCALLY. Refer to the abbreviations table located on this page for the various fastener descriptions. Standard attaching hardware torque values are also provided on the inside back cover.

In the exploded view parts list, Reference Numbers may have additional information following the Reference Number. A number in parentheses such as (4), will indicate a quantity of how many times that Reference Number is used in that location. A Tear Drop symbol will indicate an application of a “wet” product such as oil, and the number inside the Tear Drop will correspond to the description in the Parts List. Also, a number inside of a hexagon will be the torque value required, in foot pounds, on the associated Reference Number.

Items shown in the parts list that do not have Reference Numbers are shown for reference purposes only and are NOT available for purchase.

Unless otherwise specified, all Cap Screws or Bolts are Grade 5, cadmium or zinc plated; Hexagon Nuts for Grade 5 Screws or Bolts are Grade B; Hexagon Nuts for other Screws or Bolts are Grade A.

NOTE:

The following abbreviations may used

herein: ASSD ASSY CB CCW CP CS CTR CW DEG DIA FCS FHMS FL FLN FLS FW GA GR HD HN INCL JT LG LH LW LN LW M MM/mm NF PB PTO RH RPM RT SERR SHCS SN SQ T TFS THMS THRD WLDMT # ()

– Assembled – Assembly – Carriage Bolt – Counterclockwise – Cotter Pin – Cap Screw (Hexagon Head) – Center – Clockwise – Degree – Diameter – Flanged Cap Screw – Flat Head Machine Screw – Flanged – Flanged Lock Nut (Hexagon) – Flanged Lock Screw (Hexagon) – Flat Washer – Gauge – Grade – Hard or Head – Hex Nut – Includes – Joint – Large – Left Hand – Lock Washer – Lock Nut – Lock Washer – Metric – Millimeter – National Fine – Plow Bolt – Power Take Off – Right Hand – Revolutions Per Minute – Right – Serrated – Socket Head Cap Screw – Serial Number or Slotted Nut – Square – Tooth or Teeth – Thread Forming Screw – Truss Head Machine Screw – Thread – Weldment – Number – (Quantity Used Here) – Torque Required in foot pounds – Indicates a Fluid Application

TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Front Cover Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Decal Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Tongue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5 Trailer Frame, Leg & Pusharm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–7 Pusharm & Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Wheel Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Forming Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–11 Header Frame & Conditioner Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12–13 Conditioner (Left Side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–15 Conditioner (Right Side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16–17 Pitman & Wobble Arm Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18–19 Reel Variable Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20–21 Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22–23 Sickle & Guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24–25 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26–29 Tower–to–Gearbox PTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Tower–to–Tractor PTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Hitchjack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Gear Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Options & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30–32 Hydraulic Tongue Positioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Mechanical Tongue Positioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Transport Light Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Cutterbar Wearplate Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Tall Crop Divider Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Center Skid Shoe Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Safety Tow Chain (10 Ton) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34–36 Standard Hardware Torque specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover Attaching Hardware Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover

Printed in U.S.A.

1

906693/AP993

DECAL LOCATIONS GENERAL INFORMATION

PAINT NOTICE Use this list to order paint for refinishing: 906315 One Gal. AG Red 906324 One Qt. Light Grey 906316 6 (12 oz. Spray Cans) AG Red 906325 6 (12 oz. Spray Cans) Light Grey

Decal Locations information is provided to assist in the proper selection and application of new decals, in the event the original decal(s) become(s) damaged or the machine is repainted. Refer to the listing for the illustration reference number, part number, description and quantity of each decal provided in the Kit. Refer to the appropriate illustration(s) for replacement location(s).

NOTE: Refer to the SAFETY Chapter of the Operator’s Manual for the specific information provided on all of the various Safety Decals furnished in the Decal Kit(s).

To insure proper selection for correct replacement decal(s), compare all of the various close-up location photographs to your machine BEFORE starting to refinish the unit. Then, circle each pictured decal (applicable to your machine) while checking-off its part number in the listing. After you have verified all the decals needed for replacement, set aside unneeded decals for disposal.

The Decal Set Number for the MC2175 is 126970. The Set includes the following:

NEW DECAL APPLICATION Surfaces MUST be free from dirt, dust, grease and other foreign material before applying the new decal. To apply a solid-formed decal, remove the smaller portion of the decal backing paper and apply this part of the exposed adhesive backing to the clean surface while maintaining proper position and alignment. Slowly peel off the other portion of the backing paper while applying hand pressure to smooth-out the decal surface.

Ref. No. 1.

2.

3.

4.

5.

6.

Part Number 060510 060511 067493 075749 082666 091444

7.

8.

093020 093365

9.

10.

093366 093367

11.

12.

13.

14.

093373 093381 093466 093643

15.

16.

17.

18.

19.

20.

093653 094913 094914 112389 112390 115974

Description & Quantity Jack Storage Position Jack Lift Position Red Reflector Stripe (2 Places) Drive Line Dimensions Do NOT Lift on Pushbar DANGER – Rotating Component (2 Places) Lubrication Symbol WARNING – Close or Replace Guard (2 Places) IMPORTANT - Store Manual Here WARNING - Owner’s Responsibility & Read Manual WARNING - General Safety WARNING - Use Drawbar Transport Lock WARNING – 540 RPM Operation ONLY DANGER – Stay Clear of Header (3 Places) WARNING – Rotating Drive Line GEHL 3-1/4” (3 Places) GEHL 5” 2175 (2 Places) Decal – Colorbar (2 Places) WARNING – Install Transport Locks (2 Places)

NOTE:

CAUTION

Order Part Number 126757 for 10 ft roll of replacement Striping

ALWAYS observe Safety Rules shown on Decals. If Decals become damaged, or if the unit is repainted, replace the Decals. If repainting, BE SURE that ALL Decals from the Kit(s) which apply to your machine, are affixed to your unit.

906693/AP993

2

Printed in U.S.A.

l7

6

14

5

6

6

16

1 7 13

10

2

15

11

4

11 13 10 4

18 19

15

2

Front Master

l7

3

8

6

5 20

16

14

14 16

12 1 19

14

18

16

9

14

19

20

20

3

8

18

Printed in U.S.A.

3

906693/AP993

MC2175 – TONGUE

3

1

9 2

10

11

12

13

14

12

4 5 9 8

6

7 15

906693/AP993

4

Printed in U.S.A.

MC2175 – TONGUE Ref. No.

Part No.

01

330–33269

GUARD/TIRE . . . . . . . . . . . . . . . . . . . . . . . 1

076589

FLS 3/8X1 . . . . . . . . . . . . . . . . . . . . . . . . . 2

Description

Qty. Req.

Ref. No.

Part No.

08

087758

070856

NUT/HEX FLANGE SERR LOCK 3/8 . . 2

09

076590

FLS 1/2X1 . . . . . . . . . . . . . . . . . . . . . . . . . 2

10

081374

NUT/HEX FLANGE SERR LOCK 1/2 . . 2

02

097775

DRAWBAR/ASSY . . . . . . . . . . . . . . . . . . . . 1

11

03

220–32514

PIN/WLDMT . . . . . . . . . . . . . . . . . . . . . . . . . 1

12

650650

CS 1/2X3–1/2 (LN) . . . . . . . . . . . . . . . . . . 1

Qty. Req.

Description

PLATE/HITCH TOP . . . . . . . . . . . . . . . . . . 1

650710

CS 5/8X2–1/4 (L) . . . . . . . . . . . . . . . . . . . 4

059743

HUB/JACK (WELD–ON) . . . . . . . . . . . . . . 2

126375

SHIELD/DRIVELINE (INCL 11) . . . . . . . . . 1

061685

CB 3/8X1–3/4 (N,L,LN,2P) . . . . . . . . . . . 3

126342

FLAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

124484

FLANGETTE . . . . . . . . . . . . . . . . . . . . . . . . 2

650704

CB 3/8X1 (N,L) . . . . . . . . . . . . . . . . . . . . . 3

520092

BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1

097859

CLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

13

072330

SCREW/SELF TAPPING . . . . . . . . . . . . . 7

14

520093

LOCK/COLLAR . . . . . . . . . . . . . . . . . . . . . . 1

125421

HOSE/ASSY (230″) . . . . . . . . . . . . . . . . . . 1

15

803098b

CHAIN/SAFETY (OPTIONAL) . . . . . . . . . . 1

06

088841a

JACK/ASSY . . . . . . . . . . . . . . . . . . . . . . . . . 1

07

087756

PLATE/HITCH ASSY LOWER . . . . . . . . . . 1

04 05

Printed in U.S.A.

a) For breakdown, see Components page titled Hitchjack. b) For breakdown, see Options and Accessories pages.

5

906693/AP993

MC2175 – TRAILER FRAME, LEG & PUSHARM

906693/AP993

6

Printed in U.S.A.

MC2175 – TRAILER FRAME, LEG & PUSHARM Ref. No.

Part No.

Ref. No.

Part No.

01

220–32516

PIN/PUSH ARM PIVOT . . . . . . . . . . . . . . . 1

650495

CS 1/2X1–1/4 (N,L) . . . . . . . . . . . . . . . . . 1

24

200–32504

LINK/TRANSPORT . . . . . . . . . . . . . . . . . . . 2

651123

02

097772

FRAME/TRAILER ASSY . . . . . . . . . . . . . . 1

CS 5/8X1 (L) . . . . . . . . . . . . . . . . . . . . . . . 2

03

030–17662

CS 3/4X10 (N,2P) . . . . . . . . . . . . . . . . . . . . 2

25

400–21904

WASHER/SPECIAL . . . . . . . . . . . . . . . . . AR

26

480–27676

04

360–32500

WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 2

SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

05

27

200–32505

CONNECTOR . . . . . . . . . . . . . . . . . . . . . . . 2

045–31407

BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . 2

28

380–32342

SPRING/DOUBLE TORSION . . . . . . . . . . 2

06

360–32499

SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

29

040–33325

LIFT/FLEXIBLE ASSY . . . . . . . . . . . . . . . . 2

07

330–33279

DEFLECTOR/THIRD LINK . . . . . . . . . . . . 1

30

220–32515

PIN/WHEEL ASSY . . . . . . . . . . . . . . . . . . . 2

650533

CS 3/8X1–1/2 (N,L,P) . . . . . . . . . . . . . . . . 2

650491

CS 3/8X1–1/4 (LN,P) . . . . . . . . . . . . . . . . 2

200–32506

LINK/THIRD . . . . . . . . . . . . . . . . . . . . . . . . . 1

570021

FITTING/GREASE . . . . . . . . . . . . . . . . . . 2

08

Description

Qty. Req.

650709

CS 3/4X4 (N,L,P) . . . . . . . . . . . . . . . . . . . 2

09

250–32506

YOKE/ASSY . . . . . . . . . . . . . . . . . . . . . . . . 1

10

380–32350

SPRING/FLOTATION ASSY . . . . . . . . . . . 2

11

200–32507

PIVOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

12

030–31904

U–BOLT 3/4 (2N) . . . . . . . . . . . . . . . . . . . . 1

13

081377

FLS 3/8X1–1/4 . . . . . . . . . . . . . . . . . . . . . . . 1

14

220–32517

PIN\SPRING PIVOT . . . . . . . . . . . . . . . . . . 1

570014 18

240–32043

ARM/PUSH ASSY LT . . . . . . . . . . . . . . . . . 1

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . 1

070856

NUT/HEX LG FL SERR LOCK 3/8 . . . . 1

20

045–31406

BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . 2

22 23

117085b

LEG/ASSY RT . . . . . . . . . . . . . . . . . . . . . . . 1

082623

LEG/ASSY LT . . . . . . . . . . . . . . . . . . . . . . . 1

220–32520

PIN/LOWER . . . . . . . . . . . . . . . . . . . . . . . . 2

650577

CS 5/16X1–1/2 (LN) . . . . . . . . . . . . . . . . . 4

Printed in U.S.A.

570002

FITTING/GREASE . . . . . . . . . . . . . . . . . . 2

220–32519

PIN/UPPER . . . . . . . . . . . . . . . . . . . . . . . . . 2

650577

CS 5/16X1–1/2 (LN) . . . . . . . . . . . . . . . . . 2

082621

SPINDLE (WELD–IN) . . . . . . . . . . . . . . . . . 2

33

385–27865

PLUG/SPRING . . . . . . . . . . . . . . . . . . . . . . 2

34

480–42349

PIN/PIVOT LH . . . . . . . . . . . . . . . . . . . . . . . 1

35

049038

LATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

36

111377

DOOR/ASSY . . . . . . . . . . . . . . . . . . . . . . . . 1

061872

SCREW/HEX WASHER HD . . . . . . . . . . 2

37

125882

SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

38

125883

SCREW/SPECIAL . . . . . . . . . . . . . . . . . . . 1

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . 1

124667

MOUNT/SMV BRACKET . . . . . . . . . . . . . . 1

39

CYLINDER/HYDRAULIC ASSY . . . . . . . . 1

082620a

Qty. Req.

32

FITTING/GREASE . . . . . . . . . . . . . . . . . . 1

19 21

31

Description

40

650545

CS 5/16X1–1/4 (N,L,6P) . . . . . . . . . . . . . 2

047269

SOCKET/SIGN MOUNTING . . . . . . . . . . . 1

650969

CS 5/16X5/8 (LN) . . . . . . . . . . . . . . . . . . . 2

a) Not illustrated. b) For Seal Kit, order 093110.

7

906693/AP993

MC2175 – PUSHARM & HYDRAULICS

Ref. No.

Part No.

01

030–17662

CS 3/4X10 (N,2P) . . . . . . . . . . . . . . . . . . . . 1

02

117086a

CYLINDER/HYDRAULIC ASSY . . . . . . . . 1

03

380–32351b

04

117927 570019 240–32029 570019

Ref. No.

Part No.

08

220–32518 655018

PIN/COTTER 3/16X1–1/4 . . . . . . . . . . . . 2

SPRING/FLOTATION ASSY RT . . . . . . . . 1

09

400–32443

WASHER/SPECIAL . . . . . . . . . . . . . . . . . AR

ARM/PUSH ASSY RT . . . . . . . . . . . . . . . . 1

10

097859

CLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

072330

SCREW/SELF TAPPING . . . . . . . . . . . . . 3

(AFTER SN25199)

11

124128

HOSE/ASSY (137″) . . . . . . . . . . . . . . . . . . 1

ARM/PUSH ASSY RT . . . . . . . . . . . . . . . . 1

12

420–33066

GROMMET . . . . . . . . . . . . . . . . . . . . . . . . . 2

FITTING/GREASE . . . . . . . . . . . . . . . . . . 1

13

117085a

CYLINDER/HYDRAULIC ASSY . . . . . . . . 1

(BEFORE SN25200)

14

125421

HOSE/ASSY (230″) . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

FITTING/GREASE . . . . . . . . . . . . . . . . . . 1

06

480–27676

WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 2

07

310–32513

SCREW/SPECIAL (5/8 L) . . . . . . . . . . . . . 2

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . 2

906693/AP993

Description

Qty. Req.

PIN/PIVOT RT . . . . . . . . . . . . . . . . . . . . . . . 1

a) For Seal Kit order 093110. b) For replacement parts order 385–27865 Top Plug, 380–32350 Spring & 385–27867 Bottom Plug.

8

Printed in U.S.A.

MC2175 – WHEEL ASSEMBLY

15

16 1

8

17 9 11

2 10 3

12 14 13 4 10 5

Ref. No. 01

Part No.

Description

Qty. Req.

7

6 Ref. No.

Part No. 076586

CAP/GREASE . . . . . . . . . . . . . . . . . . . . . . . 2

Description

Qty. Req.

082623

LEG/ASSY LT (SHOWN) . . . . . . . . . . . . . . 1

09

082620

LEG/ASSY RT (NOT SHOWN) . . . . . . . . . 1

10

02

079716

SEAL/GREASE . . . . . . . . . . . . . . . . . . . . . . 2

11

042162

CUP/WHEEL BEARING . . . . . . . . . . . . . . . 2

03

042163

CONE/WHEEL BEARING . . . . . . . . . . . . . 2

12

046000

BOLT/WHEEL . . . . . . . . . . . . . . . . . . . . . . 12

04

091870

HUB/WHEEL ASSEMBLY (INCL 11–14) . 2

13

046001

NUT/WHEEL . . . . . . . . . . . . . . . . . . . . . . . 12

05

520201

CONE/BEARING . . . . . . . . . . . . . . . . . . . . 2

14

520054

CUP/BEARING . . . . . . . . . . . . . . . . . . . . . . 2

06

066717

WASHER/SPINDLE . . . . . . . . . . . . . . . . . . 2

15

126739

WHEEL/RIM (14 X 8KB DC) . . . . . . . . . . . 2

07

653102

NUT/SLOTTED 7/8 NF . . . . . . . . . . . . . . . . 2

16

045582

VALVE/TIRE . . . . . . . . . . . . . . . . . . . . . . . . 2

08

655010

PIN/COTTER 1/8X1-1/2 . . . . . . . . . . . . . . . 2

17

082621

SPINDLE (WELD–IN) . . . . . . . . . . . . . . . . . 2

Printed in U.S.A.

9

GREASE/GUN 242 LITHIUM . . . . . . . . . AR

906693/AP993

MC2175 – FORMING CHAMBER

16

15 14

2

7

12 13 4

5

6

8

3 11

9 10

22

17

21 19

18

20

1

906693/AP993

10

Printed in U.S.A.

MC2175 – FORMING CHAMBER Ref. No.

Part No.

Ref. No.

Part No.

01

330–33262 655018

FLUFFER/ASSY . . . . . . . . . . . . . . . . . . . . . 1

16

092406

EDGING/DIRECTOR . . . . . . . . . . . . . . . . . 2

PIN/COTTER 3/16X1–1/4 . . . . . . . . . . . . 1

290–32461

CONTROL/FLUFFER ASSY . . . . . . . . . . . 1

17

092204

SUPPORT/ASSY LT . . . . . . . . . . . . . . . . . . 1

655018

PIN/COTTER 3/16X1–1/4 . . . . . . . . . . . . 1

650437

CB 5/16X5/8 . . . . . . . . . . . . . . . . . . . . . . . 4

070856

400–32443

WASHER/SPECIAL . . . . . . . . . . . . . . . . . 1

NUT/HEX LG FL SERR LOCK 5/16 . . . . 4

290–32462

ROD/CONNECTING . . . . . . . . . . . . . . . . . 3

092201a

SUPPORT/ASSY RT . . . . . . . . . . . . . . . . . 1

650553

PIN/COTTER 1/8X3/4 (3/8 P) . . . . . . . . . 6

650437

CB 5/16X5/8 . . . . . . . . . . . . . . . . . . . . . . . 4

04

420–30377

GROMMET/RUBBER . . . . . . . . . . . . . . . . . 3

070856

NUT/HEX LG FL SERR LOCK 5/16 . . . . 4

05

390–32643

RETAINER . . . . . . . . . . . . . . . . . . . . . . . . . . 2

097335

WINDROWER/LT . . . . . . . . . . . . . . . . . . . . 1

076588

FLS 3/8X3/4 (FLN) . . . . . . . . . . . . . . . . . . 4

070856

NUT/HEX LG FL SERR LOCK 3/8 . . . . . 4

650437

CB 5/16X5/8 . . . . . . . . . . . . . . . . . . . . . . . 3

06

220–32513

PIN/ASSY (3/8 P) . . . . . . . . . . . . . . . . . . . . 1

651096

CB 5/16X1/2 . . . . . . . . . . . . . . . . . . . . . . . 6

07

380–32348

SPRING/COMPRESSION . . . . . . . . . . . . . 1

070856

NUT/HEX LG FL SERR LOCK 5/16 . . . . 9

08

400–18916

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

097334a

WINDROWER/RT . . . . . . . . . . . . . . . . . . . . 1

09

220–18200

PIN/ROLL . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

650437

CB 5/16X5/8 . . . . . . . . . . . . . . . . . . . . . . . 3

10

090–32297

HANDLE/ASSY . . . . . . . . . . . . . . . . . . . . . . 1

651096

CB 5/16X1/2 . . . . . . . . . . . . . . . . . . . . . . . 6

11

076958

PIN/SPRING PLAIN . . . . . . . . . . . . . . . . . . 1 070856

NUT/HEX LG FL SERR LOCK 5/16 . . . . 9

390–32696

STIFFENER/VEIN . . . . . . . . . . . . . . . . . . . . 2

650949

THMS 5/16X3/4 (N,L,P) . . . . . . . . . . . . . . 6

02

03

Description

Qty. Req.

12

097598

PLATE/SIDE BACKING . . . . . . . . . . . . . . . 2

13

097599

PLATE/CENTER BACKING . . . . . . . . . . . . 1

072330

SCREW/SELF TAPPING . . . . . . . . . . . . 12

18

19

Description

Qty. Req.

14

330–33259

COVER/ASSY . . . . . . . . . . . . . . . . . . . . . . . 1

20

045–31404

BUSHING OILITE . . . . . . . . . . . . . . . . . . . . 2

15

092208

DIRECTOR/LEFT . . . . . . . . . . . . . . . . . . . . 1

21

420–33903

EDGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

650437

CB 5/16X5/8 (NILN,P) . . . . . . . . . . . . . . . 2

22

097772

FRAME/TRAILER . . . . . . . . . . . . . . . . . . . . 1

092207a

DIRECTOR/RIGHT . . . . . . . . . . . . . . . . . . . 1

650437

CB 5/16X5/8 (NILN,P) . . . . . . . . . . . . . . . 2

Printed in U.S.A.

a) NOT Illustrated.

11

906693/AP993

MC2175 – HEADER FRAME & CONDITIONER ROLLERS

6 7

4 5 23

3 4

22

6

8

4

9

2

20

21

1 10 19

11 12

13

18

24

25

17

14

25 16 15

906693/AP993

12

Printed in U.S.A.

MC2175 – HEADER FRAME & CONDITIONER ROLLERS Ref. No.

Part No.

01

112905 650687

Ref. No.

Part No.

14

330–33297

SHIELD/BELT . . . . . . . . . . . . . . . . . . . . . . . 1

CB 5/16X3/4 (N,L,P) . . . . . . . . . . . . . . . . . 5

076588

FLS 3/8X3/4 . . . . . . . . . . . . . . . . . . . . . . . 5

070856

NUT/HEX LG FL SERR LOCK 3/8 . . . . . 5

097827

SHOE/ROCK LT . . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

SHIELD/ASSY RT . . . . . . . . . . . . . . . . . . . . 1

02

290–32471

ROD/ASSY . . . . . . . . . . . . . . . . . . . . . . . . . 1

03

420–30377

GROMMET/RUBBER (5/16 P) . . . . . . . . . 1

04

220–16199

PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

05

112909

TOOL/ASSY . . . . . . . . . . . . . . . . . . . . . . . . 1

06

330–33283

DEFLECTOR/ASSY . . . . . . . . . . . . . . . . . . 2

076588

FLS 3/8X3/4 (FLN) . . . . . . . . . . . . . . . . . . 4

07

126961

08

126960

09

127158

15

Description

Qty. Req.

650834

CB 1/2X1–1/2 (N,L,1P) . . . . . . . . . . . . . . 3

16

420–34436

PLUG/HOLE . . . . . . . . . . . . . . . . . . . . . . . . 2

17

126958

PUSH BAR/ASSY . . . . . . . . . . . . . . . . . . . . 1

650453

CS 1/2X1–1/2 (N,L) . . . . . . . . . . . . . . . . . 4

18

390–32658

LATCH (P 5/16) . . . . . . . . . . . . . . . . . . . . . . 2

ROLL UPPER/LH SPIRAL . . . . . . . . . . . . . 1

19

380–32348

SPRING/COMPRESSION (LN 5/16) . . . . 2

ROLL LOWER/RH SPIRAL . . . . . . . . . . . . 1

20

083397

SHIELD/END SICKLE . . . . . . . . . . . . . . . . 1

650490

CS 3/8X1 (NILN,P) . . . . . . . . . . . . . . . . . . 1

21

126922

HEADER/FRAME ASSY . . . . . . . . . . . . . . 1

22

420–34437

PAD/END PANEL . . . . . . . . . . . . . . . . . . . . 2

23

420–34447

EDGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

SHIELD/TRANSMISSION ASSY . . . . . . . 1

650953

THMS 3/8X3/4 (N,L) . . . . . . . . . . . . . . . . . 4

10

610748

CATCH/KEEPER . . . . . . . . . . . . . . . . . . . . 2

11

078580

POUCH/MANUAL . . . . . . . . . . . . . . . . . . . . 1

24

420–34438

PAD/TRANSMISSION . . . . . . . . . . . . . . . . 1

12

068642

WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 4

25

126957

PLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

13

079923

RIVET/BLIND . . . . . . . . . . . . . . . . . . . . . . . 4

650453

CS 1/2X1–1/2 (N,L) . . . . . . . . . . . . . . . . . 4

Printed in U.S.A.

13

906693/AP993

MC2175 – CONDITIONER (LEFT SIDE)

9

11

12

13

10

14

4

15

5 6 7 6 8

1 2 3 2

906693/AP993

14

Printed in U.S.A.

MC2175 – CONDITIONER (LEFT SIDE) Ref. No.

Part No.

Description

Qty. Req.

Ref. No.

Part No.

Description

Qty. Req.

01

089867

COLLAR/BEARING . . . . . . . . . . . . . . . . . . 1

08

520195

COLLAR/BEARING . . . . . . . . . . . . . . . . . . 1

02

010–32322

FLANGETTE . . . . . . . . . . . . . . . . . . . . . . . . 2

09

480–27676

WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 1

650495

CS 1/2X1–1/4 (L) . . . . . . . . . . . . . . . . . . . 4

651104

CB 5/8X3–1/4 (LN,L) . . . . . . . . . . . . . . . . 1

03

089871

BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1

10

112705

BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . 1

04

056640

RING/RETAINING . . . . . . . . . . . . . . . . . . . 1

11

653029

NUT/HEX 3/4 . . . . . . . . . . . . . . . . . . . . . . . . 2

05

044090

SPACER (.135) . . . . . . . . . . . . . . . . . . . . . AR

12

126936

CS 3/4X5–1/2 GR8 . . . . . . . . . . . . . . . . . . . 1

400–27079

WASHER (.090) . . . . . . . . . . . . . . . . . . . . AR

13

125766

ARM/ROLL ASSY LT . . . . . . . . . . . . . . . . . 1

06

077601

RETAINER/BEARING 85MM . . . . . . . . . . . 2

14

380–32354

SPRING/ROLL ASSY (INCL 15) . . . . . . . . 1

650527

CB 1/2X1–1/4 (LN) . . . . . . . . . . . . . . . . . . 4

15

385–27865

PLUG/SPRING . . . . . . . . . . . . . . . . . . . . . . 1

07

089872

BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1

310–32513

CS 3/4X6 (N,P) . . . . . . . . . . . . . . . . . . . . . 1

Printed in U.S.A.

15

906693/AP993

MC2175 – CONDITIONER (RIGHT SIDE)

30 11

1

1

5

5

7

9

7

8

4

3

3

4

10

29 28 27

26

25

8 6

2

6

12

16

2

9

20 17

16

Bolt Tightening Sequence for Timing Sprockets

18

19 20

22

21

23

21 24

31

15 13 14 1

11

12

8

9

2 3

7

4

10

3 5 6

906693/AP993

16

Printed in U.S.A.

MC2175 – CONDITIONER (RIGHT SIDE) Ref. No.

Part No.

Ref. No.

Part No.

01

126939 650488

SHIELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

16

077601

RETAINER/BEARING . . . . . . . . . . . . . . . . 2

CS 3/8X3/4 (LN) . . . . . . . . . . . . . . . . . . . . 5

17

089872

BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1

650790

CB 3/8X3/4 (LN) . . . . . . . . . . . . . . . . . . . . 1

18

125894

ARM/ROLL ASSY RT . . . . . . . . . . . . . . . . . 1

650495

CS 1/2X1–1/4 (LN) . . . . . . . . . . . . . . . . . . 2

02

520195

COLLAR/LOCK . . . . . . . . . . . . . . . . . . . . . . 2

03

077601

Description

Qty. Req.

Description

Qty. Req.

650527

CB 1/2X1–1/2 (LN) . . . . . . . . . . . . . . . . . . 4

19

6H154

WASHER/SHIM . . . . . . . . . . . . . . . . . . . . . AR

RETAINER/BEARING 85MM . . . . . . . . . . . 2

20

091918

SPROCKET/IDLER#80X12T . . . . . . . . . . . 2

650494

CS 1/2X1 (LN) . . . . . . . . . . . . . . . . . . . . . . 2

21

650163

CS 3/4X1–3/4 (L) . . . . . . . . . . . . . . . . . . . . . 2

04

089872

BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1

22

125899

ARM/ASSY . . . . . . . . . . . . . . . . . . . . . . . . . 1

05

126948

SPKT/80A17T . . . . . . . . . . . . . . . . . . . . . . . 1

23

480–27676

WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 1

06

115727a

ELEMENT/LOCKING 1–3/4 SHAFT . . . . . 1

24

310–32515

SCREW/SPECIAL (L 5/8) . . . . . . . . . . . . . 1

07

126951

CHAIN/ROLLER #80X62 . . . . . . . . . . . . . . 1

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . 1

08

126949

SPKT/80A17T . . . . . . . . . . . . . . . . . . . . . . . 1

25

076313

YOKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

09

057557

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

26

655006

CP 1/8X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

10

651277

CS 1/2X1–1/2 GR8 (L) . . . . . . . . . . . . . . . . 1

27

126940

SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

11

112705

BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . 1

28

H786B

SPRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

12

480–27676

WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 1

651104

CB 5/8X3–1/4 (LN,L) . . . . . . . . . . . . . . . . 1

13

380–32354

SPRING/ROLL ASSY (INCL 14) . . . . . . . . 1

14

385–27865

PLUG/SPRING . . . . . . . . . . . . . . . . . . . . . . 1

15

310–32515

CS 3/4X6 (N,P) . . . . . . . . . . . . . . . . . . . . . . 1

Printed in U.S.A.

29

H6208

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

30

061937

CS 1/2X5–1/2 (N) . . . . . . . . . . . . . . . . . . . . 1

31

126936

CS 3/4X5–1/2 GR8 (2N) . . . . . . . . . . . . . . . 1

a) See inset for proper torquing sequence.

17

906693/AP993

MC2175 – PITMAN & WOBBLE ARM DRIVE

7 8 1 2

3

4

5 9

18 16

6

15

22 21 19

10 11

20 19

23 17

33 35 34 33 32 31

39

12 24

13

25 28

38

14 29

38 3-1/8

30 3-7/8

31 32 33 26

34 35

27

36 37

906693/AP993

18

Printed in U.S.A.

MC2175 – PITMAN & WOBBLE ARM DRIVE Ref. No.

Part No.

01

020–32214

02

260–32252

03

045–31395

Ref. No.

Part No.

V–BELT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

22

350–32475c

RING/LOCKING . . . . . . . . . . . . . . . . . . . . . 1

PULLEY 3 GROOVE 7–3/4 OD . . . . . . . . 1

23

126297

BEARING/ASSY . . . . . . . . . . . . . . . . . . . . . 1

SPLIT TAPER BUSHING . . . . . . . . . . . . . . 1

24

520093

COLLAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

(INCLUDES SCREWS)

25

098235

ARM/PITMAN ASSY . . . . . . . . . . . . . . . . . . 1

26

390–16339

CLAMP/PITMAN . . . . . . . . . . . . . . . . . . . . . 1

651113

CS 7/16X1–3/4 (N) . . . . . . . . . . . . . . . . . . 1

27

200–32366

SOCKET/ASSY (LONG) . . . . . . . . . . . . . . 1

651239

CS 1/2X2–1/2 GR8 (P) . . . . . . . . . . . . . . . 2

210–19530

NUT/LOCK FLANGE . . . . . . . . . . . . . . . . 2

Description

Qty. Req.

117936

CS 5/16X2 FULL THREAD (L) . . . . . . . . 3

650198

SHSS–SL 1/4X3/8 . . . . . . . . . . . . . . . . . . 1

04

180–10909

KEY/SQ.HARD 1/4X2 . . . . . . . . . . . . . . . . . 1

05

360–21711

SHIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AR

06

090086a

GEARBOX/ASSEMBLED . . . . . . . . . . . . . 1

650494

CS 1/2X1 (L) . . . . . . . . . . . . . . . . . . . . . . . 4

045–31417

BUSHING/PIVOT . . . . . . . . . . . . . . . . . . . . 1

651119

CS 3/4X10 (N,L,2P) . . . . . . . . . . . . . . . . . 1

07

6H 154 08

28 29

Description

Qty. Req.

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . 1

122892

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

650490

CS 3/8X1 (L) . . . . . . . . . . . . . . . . . . . . . . . 1

126938

RETAINER . . . . . . . . . . . . . . . . . . . . . . . . . . 1

650533

CS 3/8X1–1/2 (L) . . . . . . . . . . . . . . . . . . . 3

30

240–32035

ARM/WOBBLE ASSY . . . . . . . . . . . . . . . . . 1

31

520205

BEARING/CUP . . . . . . . . . . . . . . . . . . . . . . 1

WASHER/SHIM . . . . . . . . . . . . . . . . . . . AR

240–32034

ARM/IDLER ASSY . . . . . . . . . . . . . . . . . . . 1

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . 1

220–21516

PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

655006

PIN/COTTER 1/8X1 . . . . . . . . . . . . . . . . . 1

10

250–19364

YOKE/ADJUSTING . . . . . . . . . . . . . . . . . . 1

11

290–32468

ROD/ADJUSTING (1/2N) . . . . . . . . . . . . . . 1

12

040–33350

ANCHOR/ASSY . . . . . . . . . . . . . . . . . . . . . 1

35

650494

CS 1/2X1 (L,P) . . . . . . . . . . . . . . . . . . . . . 2

36

126942

ANGLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

13

360–32512

SPACER (2 1/2N,1P) . . . . . . . . . . . . . . . . . 1

37

030–31908

WOBBLE ARM PIVOT BOLT . . . . . . . . . . 1

14

380–25728

SPRING/COMPRESSION . . . . . . . . . . . . . 1

650933

NUT/SLOTTED 1” . . . . . . . . . . . . . . . . . . 1

126341

SHIELD/DRIVELINE (INCL 20) . . . . . . . . . 1

655024

PIN/COTTER 3/16X2 . . . . . . . . . . . . . . . . 1

656093

CS M8X16 (P) . . . . . . . . . . . . . . . . . . . . . . 4

360–32511

SHIM 1/16” . . . . . . . . . . . . . . . . . . . . . . . . . AR

360–32520

SHIM 1/32” . . . . . . . . . . . . . . . . . . . . . . . . . AR

200–32448

SOCKET/ASSY (SHORT) . . . . . . . . . . . . . 1

09

15

16

126342

FLAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

17

260–32253

PULLEY/PITMAN . . . . . . . . . . . . . . . . . . . . 1

18

260–25753

IDLER/FLAT BELT . . . . . . . . . . . . . . . . . . . 1

650886

CS 1/2X6–1/2 (N,L,P) . . . . . . . . . . . . . . . . 1

19

045–31396b

ELEMENT/LOCKING SET . . . . . . . . . . . . . 2

20

360–32507

SPACER/LONG . . . . . . . . . . . . . . . . . . . . . 1

21

124472c

FLANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

650491

CS 3/8X1–1/4 . . . . . . . . . . . . . . . . . . . . . . 6

Printed in U.S.A.

32

520206

BEARING/CONE . . . . . . . . . . . . . . . . . . . . 2

33

360–14855

WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 3

34

360–32510

SHIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AR

081377

FLS 3/8X1–1/4 (FLN) . . . . . . . . . . . . . . . . 2

38 39

070856

NUT/HEX LG FL SERR LOCK 3/8 . . . . . 2

126943

BUSHING/STEEL (PRESS IN FRAME) . . 2

651240

CS 1/2X3 GR8 . . . . . . . . . . . . . . . . . . . . . 2

210–19530

NUT/LOCK FLANGE . . . . . . . . . . . . . . . . 2

076002

FITTING/GREASE . . . . . . . . . . . . . . . . . . 1

a) For breakdown, see Components page titled Gearbox. b) For proper assembly procedure, see the Service chapter of the Operator’s Manual. c) For proper torquing sequence, see the Service chapter of the Operator’s Manual.

19

906693/AP993

MC2175 – REEL VARIABLE DRIVE

1

2

1 3 1 2

6

1

7

4 9

8

10

5 11

7

12

13

14 15

906693/AP993

20

Printed in U.S.A.

MC2175 – REEL VARIABLE DRIVE Ref. No.

Part No.

01

027003

FLANGETTE . . . . . . . . . . . . . . . . . . . . . . . . 4

650704

CB 3/8X1 (N,L) . . . . . . . . . . . . . . . . . . . . . 6

02

520065

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

03

520085

COLLAR/LOCK . . . . . . . . . . . . . . . . . . . . . . 2

04

320–32578

JACKSHAFT . . . . . . . . . . . . . . . . . . . . . . . . 1

05

220–19812

PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

650553

PIN/COTTER 1/8X3/4 (P 5/16) . . . . . . . . 1

370–32113

SPROCKET/ASSY 50T . . . . . . . . . . . . . . . 1

06 07 08

Description

Qty. Req.

Ref. No.

Part No.

09

010–32392

FLANGE/BEARING . . . . . . . . . . . . . . . . . . 1

650786

CB 3/8X1–1/4 (N,L,P) . . . . . . . . . . . . . . . . 3

10

520159

COLLAR/BEARING . . . . . . . . . . . . . . . . . . 1

11

370–32142

SPROCKET/11T . . . . . . . . . . . . . . . . . . . . . 1

650338

SHSS 1/4–20 . . . . . . . . . . . . . . . . . . . . . . 2

500076

CHAIN/ROLLER #50X58 LINKS . . . . . . . . 1

12

004942

KEY 1/4X1 . . . . . . . . . . . . . . . . . . . . . . . . . . 1

360–32506

SPACER/IDLER . . . . . . . . . . . . . . . . . . . . . 1

370–18061

SPROCKET/IDLER . . . . . . . . . . . . . . . . . . 1

651104

CB 5/8X3–1/4 (N,L 5/8, 2P 7/8) . . . . . . . . 1

098032

PULLEY/HALF . . . . . . . . . . . . . . . . . . . . . . 2

064422

FLS 3/8X1–1/2 . . . . . . . . . . . . . . . . . . . . . 4

15

360–32505

SHIM 7/64″ . . . . . . . . . . . . . . . . . . . . . . . . . 5

21

Qty. Req.

13 14

Printed in U.S.A.

Description

906693/AP993

MC2175 – REEL

906693/AP993

22

Printed in U.S.A.

MC2175 – REEL Ref. No.

Part No.

01

120–32773

REEL/WLDMT . . . . . . . . . . . . . . . . . . . . . . . 1

02

520085

COLLAR/LOCK . . . . . . . . . . . . . . . . . . . . . . 2

03

027003

FLANGETTE . . . . . . . . . . . . . . . . . . . . . . . . 4

650704

CB 3/8X1 (N,L) . . . . . . . . . . . . . . . . . . . . . 3

650860

CB 3/8X1–3/4 (N,L,2P) . . . . . . . . . . . . . . 1

04

520065

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

18

126937

STRAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

05

040–33351

MOUNT/BEARING RIGHT . . . . . . . . . . . . 1

19

650704

CB 3/8X1 (P) . . . . . . . . . . . . . . . . . . . . . . . 24

650527

CB 1/2X1–1/4 (N,L,P) . . . . . . . . . . . . . . . . 3

20

210–19533

FLN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . 24

06

390–32657

STRAP/ADJUSTING . . . . . . . . . . . . . . . . . 1

21

110–32416

BAT/REEL . . . . . . . . . . . . . . . . . . . . . . . . . . 4

061930

CS 1/2X4 (N,L) . . . . . . . . . . . . . . . . . . . . . 1

22

310–16296

CS 5/8X2–1/4 (N,L) . . . . . . . . . . . . . . . . . . . 4

07

260–32251

PULLEY 20″ DIA 1–1/4 BORE . . . . . . . . . 1

23

076159

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

650243

SQHSS 1/2X1–1/4 (JN) . . . . . . . . . . . . . . 2

24

400–10627

WASHER/SPECIAL . . . . . . . . . . . . . . . . . AR

08

180–10909

KEY/1/4X1 . . . . . . . . . . . . . . . . . . . . . . . . . . 1

25

090796

BAR/TINE ASSY LONG . . . . . . . . . . . . . . . 2

09

020–32215

V–BELT (HC90) . . . . . . . . . . . . . . . . . . . . . . 1

651162

PIN/COTTER 5/16X2 . . . . . . . . . . . . . . . . 4

10

380–14677

SPRING/EXTENSION . . . . . . . . . . . . . . . . 1

090770

BAR/TINE ASSY SHORT . . . . . . . . . . . . . 2

11

030–31888

BOLT/EYE (1) 3/8 P,2N . . . . . . . . . . . . . . . 1

650486

CS 5/16X3/4 (FLN,L,12P) . . . . . . . . . . . 24

12

048182

IDLER/FLAT BELT . . . . . . . . . . . . . . . . . . . 1

26

125751

HOUSING/TINE BAR . . . . . . . . . . . . . . . . 12

13

360–32513

SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

27

010–32388

BEARING/PLASTIC . . . . . . . . . . . . . . . . . 12

14

240–32036

ARM/IDLER WLDMT . . . . . . . . . . . . . . . . . 1

28

650977

CS 5/16X2–1/4 GR8 (P) . . . . . . . . . . . . . . 48

650644

CS 1/2X3 (N,L) . . . . . . . . . . . . . . . . . . . . . 1

29

054031

CLIP/TINE . . . . . . . . . . . . . . . . . . . . . . . . . 48

650821

CS 5/8X1 (L,P) . . . . . . . . . . . . . . . . . . . . . 1

30

210–31017

NUT/SPECIAL . . . . . . . . . . . . . . . . . . . . . . 48

15

200–32509

PIVOT/WLDMT . . . . . . . . . . . . . . . . . . . . . . 1

31

110–32354

TINE/DOUBLE . . . . . . . . . . . . . . . . . . . . . 48

16

030–13498

ROD/END (2 3/8 L,P, 1 3/8 N–NF) . . . . . . 1

32

220–32566

PIN/TINE BEARING . . . . . . . . . . . . . . . . . 12

Printed in U.S.A.

Description

Qty. Req.

23

Ref. No.

Part No.

17

120–32774

CAM/ASSY . . . . . . . . . . . . . . . . . . . . . . . . . 1

650527

CB 1/2X1–1/4 (N,L,P) . . . . . . . . . . . . . . . . 3

650786

CB 3/8X1–1/4 (N,L,P) . . . . . . . . . . . . . . . . 2

Description

Qty. Req.

906693/AP993

MC2175 – SICKLE & GUARDS 13 14

2 3 11

2

4

1 5

12

6 8 9

7 Use on Drive End ONLY

10 7

Regular Guards

Stub Guards

15

20 19 18 17 16

21

906693/AP993

24

Printed in U.S.A.

MC2175 – SICKLE & GUARDS Ref. No. 01

Part No.

Description

Qty. Req.

110–32342

GUARD/SICKLE HVY DUTY . . . . . . . . . . 18

650495

CS 1/2X1–1/4 (LN) . . . . . . . . . . . . . . . . . . 2

650527

CS 1/2X1–1/4 (LN) . . . . . . . . . . . . . . . . . 15

650791

CS 1/2X1–3/4 (LN) . . . . . . . . . . . . . . . . . . 3

650834

CS 1/2X1–1/2 (LN) . . . . . . . . . . . . . . . . . 18

110–10655

SHIM 1/32 . . . . . . . . . . . . . . . . . . . . . . . . . AR

03

126320

CLIP/HOLDDOWN . . . . . . . . . . . . . . . . . . . 8

04

110–32323

CLIP/HOLDDOWN HIGH ARCH . . . . . . . 1

02

Ref. No.

Part No.

19

124737c

SECTION/TOP SERRATED . . . . . . . . . . 35

H7547Ad

SECTION/UNDER SERRATED . . . . . . . 35

050056e

SECTION/OVER SERRATED . . . . . . . . . 35

Description

Qty. Req.

(CHROMED) 060635f

SECTION/UNDER SERRATED . . . . . . . 35 (CHROMED)

20

091572g

(OVER SICKLE HEAD)

SECTION/END RT . . . . . . . . . . . . . . . . . . . 1 (TOP SERRATED)

05

360–32359

SHIM 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . AR

06

110–32405

GUARD/SPECIAL DRIVE END . . . . . . . . 1

07

097997

CLIP/SKID SHOE . . . . . . . . . . . . . . . . . . . . 6

08

110–32410

GUARD/SICKLE SPECIAL RH . . . . . . . . . 1

091384i

09

110–32330

GUARD/STUB . . . . . . . . . . . . . . . . . . . . . . 17

091385j

BOLT/#12–24X5/8 GR8 . . . . . . . . . . . . . 65

650453

CS 1/2X1–1/2 (LN) . . . . . . . . . . . . . . . . . . 2

650791

CB 1/2X1–3/4 (LN) . . . . . . . . . . . . . . . . . . 3

091386

NUT/LOCK #12–24 GR8 . . . . . . . . . . . . 76

650834

CB 1/2X1–1/2 (LN) . . . . . . . . . . . . . . . . . . 1

090692

SICKLE W/O HEAD (BOLT ON) . . . . . . . . 1

030–31887

CB 1/2X2–1/2 (2LN) . . . . . . . . . . . . . . . . 29

091382h

SECTION/END RT . . . . . . . . . . . . . . . . . . . 1 (UNDER SERRATED)

21

BOLT/#12–24X7/8 GR8 . . . . . . . . . . . . . . 11

(TOP SERRATED) 090620

SICKLE W/O HEAD (BOLT ON) . . . . . . . . 1

097995

CB 1/2X2–3/4 (2LN) . . . . . . . . . . . . . . . . . 3

10

110–32409

GUARD/SICKLE SPECIAL LH . . . . . . . . . 1

(UNDER SERRATED)

11

110–32334

HOLDDOWN CLIP STUB GUARD . . . . . 16

CONVERSION KITS:

12

110–32341

CLIP HOLDDOWN HIGH ARCH . . . . . . . 2

13

360–32404

SHIM 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . 17

14

110–32349

CLIP/ADJUSTMENT . . . . . . . . . . . . . . . . 32

15

110–32316

HEAD/SICKLE . . . . . . . . . . . . . . . . . . . . . . . 1

16

390–16339

CLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

651113

CS 7/16X1–3/4 (N) . . . . . . . . . . . . . . . . . . 1

17

091387

WASHER/HEX . . . . . . . . . . . . . . . . . . . . . . 1

18

091571a

SECTION/END LT . . . . . . . . . . . . . . . . . . . 1

For Conversion Kit to install Regular Guards on 2175, order 088743.

For Conversion Kit to install Stub Guards on 2175, order 190–32585. a) For box of (10) Left Half Sections, order 091125. b) For box of (10) Left Half Sections, order 091569. c) For box of (25) Top Serrated Sections, order 126300. d) For box of (25) Under Serrated Sections, order 083486. e) For box of (25) Chrome Over Serrated Sections, order 600190. f) For box of (25) Chrome Under Serrated Sections, order 060737. g) For box of (10) Right Half Sections, order 091126. h) For box of (10) Right Half Sections, order 091570. i) For box of (25) Screws W/Nuts, order 090052. j) For box of (50) Screws W/Nuts, order 090095.

(TOP SERRATED) 091383b

SECTION/END LT . . . . . . . . . . . . . . . . . . . 1 (UNDER SERRATED)

Printed in U.S.A.

25

906693/AP993

MC2175 – COMPONENTS (TOWER–TO–GEARBOX PTO)

8

6

7

1 6

5

3

4

3

2

11 10

3

Ref. No.

Part No.

01

094154

DRIVE/UNIVESAL ASSMD . . . . . . . . . . . . 1

02

091374

SHIELD/OUTER . . . . . . . . . . . . . . . . . . . . . 1

03

510100

RETAINER/BEARING . . . . . . . . . . . . . . . . 4

04

510223

BEARING/NYLON . . . . . . . . . . . . . . . . . . . 1

05

091373

YOKE & SHAFT . . . . . . . . . . . . . . . . . . . . . 1

06

510114

07

091377

906693/AP993

9

3 12

Ref. No.

Part No.

08

094134

JOINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

651240

CS 1/2X3 GR8 (N,L) . . . . . . . . . . . . . . . . . 2

09

092015

BEARING/NYLON . . . . . . . . . . . . . . . . . . . 1

10

091376

SHIELD/TUBE END . . . . . . . . . . . . . . . . . . 1

KIT/CENTER CROSS . . . . . . . . . . . . . . . . 2

11

084242

BEARING/CENTRALIZER . . . . . . . . . . . . . 1

HOUSING/CENTER ASSY . . . . . . . . . . . . 1

12

094155

STUB PLUG W/TUBE . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

26

Description

Qty. Req.

Printed in U.S.A.

MC2175 – COMPONENTS (TOWER–TO–TRACTOR PTO)

17 1

Tractor End

7

5 6

5 11

18 16

12

1314

4

Tower End

10 11

14

13

12

16

3

18

3 9

2

5

6

5

15

8

Ref. No.

Part No.

Ref. No.

Part No.

01

094157

02

094142

JOINT/UNIV W/TUBE . . . . . . . . . . . . . . . . 1

10

089205

YOKE/QUIK–LOCK ASSY . . . . . . . . . . . . . 1

YOKE/SPRING LOCK ASSY . . . . . . . . . . 1

11

086928

03

BALL/STAINLESS 3/8 . . . . . . . . . . . . . . . . 5

510114

KIT/CENTER CROSS . . . . . . . . . . . . . . . . 2

12

086927

SPRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

04

320–32615

YOKE/TUBE ASSY . . . . . . . . . . . . . . . . . . . 1

13

086926

COLLAR ASSY . . . . . . . . . . . . . . . . . . . . . . 2

05

510100

RETAINER/BEARING . . . . . . . . . . . . . . . . 4

14

350–32485

RING/RETAINING . . . . . . . . . . . . . . . . . . . 2

06

510023

BEARING/NYLON . . . . . . . . . . . . . . . . . . . 2

15

089286

DRIVE/MALE HALF ASSY . . . . . . . . . . . . 1

07

089207

GUARD/INNER ASSY . . . . . . . . . . . . . . . . 1

16

086931

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

08

089960

GUARD/OUTER . . . . . . . . . . . . . . . . . . . . . 1

17

084242

CENTRALIZER . . . . . . . . . . . . . . . . . . . . . . 1

09

320–32616

YOKE/SHAFT ASSY . . . . . . . . . . . . . . . . . 1

18

086930

COVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Printed in U.S.A.

Description

Qty. Req.

27

Description

Qty. Req.

906693/AP993

MC2175 – COMPONENTS (HITCHJACK)

5 7 6 6 8

4 3 4

2

Early Style 1

Ref. No.

Part No. 088841

Description

Qty. Req.

HITCHJACK - WESBAR . . . . . . . . . . . . . . 1 CONSISTS OF:

Ref. No.

Part No.

05

077838

CAP/TOP . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

06

094283

KIT/INTERNAL PARTS . . . . . . . . . . . . . . . 1

Description

Qty. Req.

01

061276

PIN & CHAIN . . . . . . . . . . . . . . . . . . . . . . . . 1

02

081462

TUBE/INNER ASSY . . . . . . . . . . . . . . . . . . 1

07

077836

KIT/GEAR . . . . . . . . . . . . . . . . . . . . . . . . . . 1

03

092021

TUBE/OUTER . . . . . . . . . . . . . . . . . . . . . . . 1

08

077839a

SHAFT/CROSS . . . . . . . . . . . . . . . . . . . . . . 1

04

126735

HANDLE (LATER STYLE) . . . . . . . . . . . . . 1

081463a

HANDLE & NUT (EARLY STYLE) . . . . . . 1

906693/AP993

a) Replaced by 126735 later style Handle.

28

Printed in U.S.A.

MC2175 – COMPONENTS (GEARBOX)

Ref. No.

Part No. 090086

Description

Qty. Req.

GEARBOX/ASSY . . . . . . . . . . . . . . . . . . . . 1 CONSISTS OF:

Ref. No.

Part No.

10

090094

SHAFT/OUTPUT . . . . . . . . . . . . . . . . . . . . 1

12

090096

PINION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

01

090087

HOUSING/GEARBOX . . . . . . . . . . . . . . . . 1

13

090097

PLUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

02

090088

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

14

090098

DIPSTICK/OIL . . . . . . . . . . . . . . . . . . . . . . . 1

03

089133

RING/SNAP . . . . . . . . . . . . . . . . . . . . . . . . . 3

15

090099

GASKET/GEARBOX COVER . . . . . . . . . . 1

04

090089

SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

16

090493

COVER/GEARBOX . . . . . . . . . . . . . . . . . . 1

05

090090

SEAL/OIL . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

17

090494

BOLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

06

084595

SHIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

18

089131

CAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

07

090091

SHAFT/INPUT . . . . . . . . . . . . . . . . . . . . . . . 1

19

090495

WASHER/SPRING . . . . . . . . . . . . . . . . . . . 1

08

090092

RING/RETAINING . . . . . . . . . . . . . . . . . . . 1

20

090496

GEAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

09

090093

LOCKNUT . . . . . . . . . . . . . . . . . . . . . . . . . . 1

21

089134

SHIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Printed in U.S.A.

29

906693/AP993

MC2175 – OPTIONS & ACCESSORIES 804861 Hydraulic Tongue Positioner

8 9 5 4

7 6 1 7

2 3

Ref. No.

Part No.

Ref. No.

Part No.

01

097597

02

580116

HOSE/ASSY . . . . . . . . . . . . . . . . . . . . . . . . 1

06

066452

PIN/LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . 1

ELBOW/HYD FITTING 90 DEG . . . . . . . . 1

03

058757

ELBOW/HYD FITTING 90 DEG . . . . . . . . 1

07

097860

CLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

08

097918

PIN/COTTER . . . . . . . . . . . . . . . . . . . . . . . . 2

09

076099

COTTER/HAIR PIN . . . . . . . . . . . . . . . . . . 2

Description

Qty. Req.

(WITH .06 ORIFICE) 04

083357a

CYLINDER/HYDRAULIC . . . . . . . . . . . . . . 1

05

040–33352

LOCK/CYLINDER . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

a) For replacement Seal Kit order 084159.

803564 Mechanical Tongue Positioner

2 3

5 4

1 6

Ref. No.

Part No. 803564

Description

Qty. Req.

CONROLT/MECHANICAL HITCH . . . . . . 1

Ref. No.

Part No.

04

090–32306

HANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

650491

CS 3/8X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . 1

650533

CS 3/8X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . 1

CONSISTS OF:

Description

Qty. Req.

01

125235

POSITIONER/OUTSIDE . . . . . . . . . . . . . . 1

02

220–32529

PIN/CYLINDER . . . . . . . . . . . . . . . . . . . . . . 2

076099

COTTER/HAIR PIN . . . . . . . . . . . . . . . . . 2

05

068209

CORD/CONTROL . . . . . . . . . . . . . . . . . . . . 1

380–10448

SPRING/EXTENSION . . . . . . . . . . . . . . . . 1

06

480–42010

CLEVIS WLDMNT, INSIDE . . . . . . . . . . . . 1

03

906693/AP993

30

Printed in U.S.A.

MC2175 – OPTIONS & ACCESSORIES 806188 Transport Light Kit

4(8)

2

804891 Cutterbar Wear Plate

5(8) 6(8)

7(8) 3

1 1

8(2)

10

Ref. No.

9

Part No.

Qty. Req.

Description

804891

GUARD/MC2175 ROCK . . . . . . . . . . . . . . 1

089767

PLATE/WEAR ASSY . . . . . . . . . . . . . . . . . 2

650791

CB 1/2X1–3/4 . . . . . . . . . . . . . . . . . . . . . . 8

CONSISTS OF: 01

803584 Tall Crop Divider Ref. No.

Part No. 806188

Description

Qty. Req.

LIGHTS/DC MC TRANSPORT . . . . . . . . . 1 CONSISTS OF:

01

112884

LIGHT/TRANSPORT LT . . . . . . . . . . . . . . . 1

02

112885

LIGHT/TRANSPORT RT . . . . . . . . . . . . . . 1

03

112886

HOLDER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

04

125946

BASE/MOUNTING . . . . . . . . . . . . . . . . . . . 8

05

055648

TIE/WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

06

650426

CS 1/4X1–1/4 . . . . . . . . . . . . . . . . . . . . . . . 8

07

071401

NUT/NYLON INSERT LOCK 1/4 . . . . . . . . 8

08

112706

SUPPORT/LIGHT . . . . . . . . . . . . . . . . . . . . 2

Ref. No.

Part No.

09

112893

HARNESS/“Y” . . . . . . . . . . . . . . . . . . . . . . . 1

01

290–32472

DIVIDER/TALL CROP . . . . . . . . . . . . . . . . 1

10

112898

HARNESS/PRIMARY . . . . . . . . . . . . . . . . . 1

650731

CS 3/8X3–1/2 (N,L) . . . . . . . . . . . . . . . . . 2

Printed in U.S.A.

1

31

Description

Qty. Req.

906693/AP993

MC2175 – OPTIONS & ACCESSORIES 804681 Center Skid Shoe

803098 Safety Tow Chain 10 Ton 5 1

1

6

2

4

3 2

4 3

Ref. No.

Part No.

804681

Description

Qty. Req.

CENTER SKID SHOE KIT . . . . . . . . . . . . . 1 CONSISTS OF:

01

076099

COTTER/HAIR PIN . . . . . . . . . . . . . . . . . . 1

02

220–32528

PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

03

330–33296a

SHOE/SKID ASSY . . . . . . . . . . . . . . . . . . . 1

04

097997

CLIP/SKID SHOE . . . . . . . . . . . . . . . . . . . . 3

Ref. No.

Part No.

Description

Qty. Req.

803098

CHAIN/SAFETY TOW 10 TON . . . . . . . . . 1

01

043912

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

02

069076

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

03

080894

CLEVIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

04

650172

CS 3/4X3–1/4 (N,L) . . . . . . . . . . . . . . . . . . . 1

05

650695

CS 5/8X3–1/2 (N,L) . . . . . . . . . . . . . . . . . . . 1

06

654014

WASHER/PLAIN WIDE 3/4 . . . . . . . . . . . . 1

CONSISTS OF:

a) Unit is equipped with (2) Skid Shoes as standard equipment

906693/AP993

32

Printed in U.S.A.

Notes

Printed in U.S.A.

33

906693/AP993

MC2175 - NUMERICAL INDEX Part No.

Page No.

Ref. No.

6H154

17

19

H786B

17

H6208

17

H7547A 004942

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

Part No.

078580

13

28

079716

29

079923

25

19

21

13

Page No.

Ref. No.

11

090091

29

07

097598

11

12

09

02

090092

29

08

13

13

090093

29

09

097599

11

13

097772

07

02

080894

32

03

090094

29

10

081377

07

13

090096

29

12

097772

11

22

097775

04

02

13

15

027003

21

01

081462

28

02

090097

29

13

097827

027003

23

03

081463

28

04

090098

29

14

097859

04

04

08

10

042162

09

11

082620

09

01

090099

29

15

097859

042163

09

03

082620

07

22

090493

29

16

097860

30

07

30

08

043912

32

01

082621

09

17

090494

29

17

097918

044090

15

05

082621

07

32

090495

29

19

097997

32

04

20

097997

25

07

21

07

045582

09

16

082623

09

090496

01

29

046000

09

12

082623

07

22

090620

25

21

098032

046001

09

13

083357

30

04

090692

25

21

098235

19

25

111377

07

36

112705

15

10

112705

17

11

112706

31

08

112884

31

01

112885

31

02

112886

31

03

112893

31

09

112898

31

10

112905

13

01

112909

13

05

115727

17

06

117085

08

13

117085

07

21

117086

08

02

117927

08

04

122892

19

28

124128

08

11

047269

07

40

083397

13

20

090770

23

25

048182

23

12

084242

26

11

090796

23

25

049038

07

35

084242

27

091373

17

26

05

050056

25

19

084595

29

06

091374

26

02

054031

23

29

086926

27

13

091376

26

10

055648

31

05

086927

27

12

091377

26

07

056640

15

04

086928

27

11

091382

25

20

057557

17

09

086930

27

18

091383

25

18

058757

30

03

086931

27

16

091384

25

20

059743

04

09

087756

04

07

091385

25

20

060635

25

19

087758

04

08

091386

25

20

061276

28

01

088841

28

091387

25

17

061937

17

30

088841

04

06

091571

25

18

066452

30

06

089131

29

18

091572

25

20

066717

09

06

089133

29

03

091870

09

04

068209

30

05

089134

29

21

091918

17

20

068642

13

12

089205

27

10

092015

26

09

069076

32

02

089207

27

07

092021

28

03

124472

19

21

070856

07

19

089286

27

15

092201

11

17

124484

04

12

071401

31

07

089767

31

01

092204

11

17

124667

07

39

076099

32

01

089867

15

01

092207

11

15

124737

25

19

076099

30

09

089871

15

03

092208

11

15

125235

30

01

076159

23

23

089872

17

04

092406

11

16

125421

04

05

076313

17

25

089872

15

07

094134

26

08

125421

08

14

076586

09

09

089872

17

17

094142

27

02

125751

23

26

076958

11

11

089960

27

08

094154

26

01

125766

15

13

077601

17

03

090086

29

094155

26

12

125882

07

37

077601

15

06

090086

19

06

094157

27

01

125883

07

38

077601

17

16

090087

29

01

094283

28

06

125894

17

18

077836

28

07

090088

29

02

097334

11

18

125899

17

22

077838

28

05

090089

29

04

097335

11

18

125946

31

04

077839

28

08

090090

29

05

097597

30

01

126297

19

23

906693/AP993

34

Printed in U.S.A.

MC2175 - NUMERICAL INDEX Part No.

Page No.

Ref. No.

126320

25

03

126341

19

126342

04

126342 126375

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

610748

13

10

110–32323

25

04

260–25753

19

18

15

650163

17

21

110–32330

25

09

260–32251

23

07

11

650172

32

04

110–32334

25

11

260–32252

19

02

19

16

650426

31

06

110–32341

25

12

260–32253

19

17

04

10

650695

32

05

110–32342

25

01

290–32461

11

02

11

03

126735

28

04

650704

23

19

110–32349

25

14

290–32462

126739

09

15

650977

23

28

110–32354

23

31

290–32468

19

11

13

02

126922

13

21

651277

17

10

110–32405

25

06

290–32471

126936

15

12

653029

15

11

110–32409

25

10

290–32472

31

01

23

22

126936

17

31

653102

09

07

110–32410

25

08

310–16296

126937

23

18

654014

32

06

110–32416

23

21

310–32513

08

07

01

310–32515

17

15

17

24

126938

19

29

655006

17

126939

17

01

655010

09

126940

17

27

803098

32

126942

19

36

803098

04

126943

19

35

803564

30

126948

17

05

803584

120–32773

26 08 15

120–32774

23

17

310–32515

180–10909

19

04

320–32578

21

04

320–32615

27

04

320–32616

27

09

330–33259

11

14

330–33262

11

01

330–33269

04

01

330–33279

07

07

330–33283

13

06

330–33296

32

03

330–33297

13

14

350–32475

19

22

350–32485

27

14

360–14855

19

33

360–21711

19

05

360–32359

25

05

360–32404

25

13

360–32499

07

06

360–32500

07

04

360–32505

21

08

180–10909

23

08

200–32366

19

27

200–32448

31

23

19

39

126949

17

08

804681

32

200–32504

07

24

126951

17

07

804861

30

200–32505

07

27

126957

13

25

804891

31

200–32506

07

08

126958

13

17

806188

31

200–32507

07

11

126960

13

08

010–32322

15

02

200–32509

23

15

126961

13

07

010–32388

23

27

210–19533

23

20

127158

13

09

010–32392

21

09

210–31017

23

30

500076

21

12

020–32214

19

01

220–16199

13

04

510023

27

06

020–32215

23

09

220–18200

11

09

510100

26

03

030–13498

23

16

220–19812

21

05

510100

27

05

030–17662

08

01

220–21516

19

09

510114

27

03

030–17662

07

03

220–32513

11

06

510114

26

06

030–31888

23

11

220–32514

04

03

510223

26

04

030–31904

07

12

220–32515

07

30

520054

09

14

030–31908

19

37

220–32516

07

01

360–32506

21

14

520065

21

02

040–33325

07

29

220–32517

07

14

360–32507

19

20

520065

23

04

040–33350

19

12

220–32518

08

08

360–32510

19

34

520085

23

02

040–33351

23

05

220–32519

07

31

360–32511

19

38

520085

21

03

040–33352

30

05

220–32520

07

23

360–32512

19

13

520092

04

13

045–31395

19

03

220–32528

32

02

360–32513

23

13

520093

04

14

045–31396

19

19

220–32529

30

02

360–32520

19

38

520093

19

24

045–31404

11

20

220–32566

23

32

370–18061

21

15

520159

21

10

045–31406

07

20

240–32029

08

04

370–32113

21

06

520195

17

02

045–31407

07

05

240–32034

19

08

370–32142

21

11

520195

15

08

045–31417

19

07

240–32035

19

30

380–10448

30

03

520201

09

05

090–32297

11

10

240–32036

23

14

380–14677

23

10

520205

19

31

090–32306

30

04

240–32043

07

18

380–25728

19

14

520206

19

32

110–10655

25

02

250–19364

19

10

380–32342

07

28

580116

30

02

110–32316

25

15

250–32506

07

09

380–32348

11

07

Printed in U.S.A.

35

906693/AP993

MC2175 - NUMERICAL INDEX Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

380–32348

13

19

390–16339

19

26

400–32443

08

09

420–34447

13

23

380–32350

07

10

390–32643

11

05

420–30377

13

03

480–27676

08

06

380–32351

08

03

390–32657

23

06

420–30377

11

04

480–27676

15

09

380–32354

17

13

390–32658

13

18

380–32354

15

14

390–32696

11

19

420–33066

08

12

480–27676

17

12

385–27865

17

14

400–10627

23

24

420–33903

11

21

480–27676

17

23

385–27865

15

15

400–18916

11

08

420–34436

13

16

480–27676

07

26

385–27865

07

33

400–21904

07

25

420–34437

13

22

480–42010

30

06

390–16339

25

16

400–27079

15

05

420–34438

13

24

480–42349

07

34

906693/AP993

36

Printed in U.S.A.

TORQUE SPECIFICATIONS NOTE:

Use these torque values when tightening GEHL hardware (excluding: Locknuts and Self–tapping, Thread Forming and Sheet Metal Screws) unless specified otherwise.

All torque values are in Lb-Ft except those marked with an * which are Lb-In (For metric torque value Nm, multiply Lb-Ft value by 1.355 or Lb-In value by 0.113)

Unified National Thread

Grade 2

Grade 5

Grade 8

Dry

Lubed

Dry

Lubed

Dry

Lubed

8-32 8-36

19* 20*

14* 15*

30* 31*

22* 23*

41* 43*

31* 32*

10-24 10-32

27* 31*

21* 23*

43* 49*

32* 36*

60* 68*

45* 51*

1/4-20 1/4-28

66* 76*

50* 56*

9 10

75* 86*

12 14

9 10

5/16-18 5/16-24

11 12

9

17 19

13 14

25

18 20

3/8-16 3/8-24

20 23

15 17

30 35

23 25

45 50

35

7/16-14 7/16-20

32 36

24 27

50 55

35 40

70 80

55 60

1/2-13 1/2-20

50 55

35 40

75 90

55 65

110 120

80 90

9/16-12 9/16-18

70 80

55 60

110 120

80 90

150 170

110 130

5/8-11 5/8-18

100 110

75 85

150 180

110 130

220 240

170 180

3/4-10 3/4-16

175 200

130 150

260 300

200 220

380 420

280 320

7/8-9 7/8-14

170 180

125 140

430 470

320 360

600 660

460 500

1-8 1-14

250 270

190 210

640 710

480 530

900 1000

680 740

Attaching Hardware Size & Description

Part Number

Size & Description

Part Number

Size & Description

Part Number

Size & Description

Part Number

#6 L #6–32 N #6 P #10 L #10–24 N #10–32 N #10 P #12 L #12–24 N 1/4 L

654044 650658 654848 650549 650550 650648 650584 650813 650627 654022

1/4 LN 1/4 N 1/4 P 5/16 FLN 5/16 JN 5/16 L 5/16 LN 5/16 N 5/16 P 3/8 JN

071700 653005 654002 070648 653034 654024 071701 653007 654004 653038

3/8 L 3/8 LN 3/8 N 3/8 NILN 3/8 P 3/8 WN 1/2 JN 1/2 L 1/2 LN 1/2 N

654026 071703 653010 067847 654006 653098 071706 654030 071706 653018

1/2 P 5/8 L 5/8 LN 5/8 N 5/8 P 3/4 L 3/4 LN 3/4 N 3/4 P 7/8 NF–SN

654009 654032 071709 653021 654012 654034 064331 653026 654014 653102



Gehl Company 143 Water Street, P.O. Box 179, West Bend, WI 53095-0179

906693/AP993

GEHL Company 1993

Printed in U.S.A.