Gehl Disc Mower Conditioner 2340 2360 Parts Manual(907146) - PDF DOWNLOAD

Form No.

907146

2340/2360

Replaces

906672



Disc Mower Conditioner

PARTS MANUAL

Introduction When ordering service parts, specify the correct part number, full description, quantity required, the unit model number and serial number.

The Disc Conditioner model and serial number is on a plate located on the left side of the Main Frame near the Drawbar anchor point. “Right’’ and “Left’’ are determined from a position standing behind the Disc Conditioner. From this position the Drawbar is on the left.

GEHL Company reserves the right to make changes or improvements in the design or construction of any part of the unit without incurring the obligation to install such changes on any previously delivered units.

NOTE:

On original tire replacement, company policy prohibits the sale of replacement tires for all GEHL machinery. Replacement Wheel Sets are available and tire size information is called out with the Wheel Sets to facilitate replacement tire selection. ALL REPLACEMENT TIRES MUST BE PURCHASED LOCALLY. Refer to the abbreviations table located on this page for the various fastener descriptions. Standard attaching hardware torque values are also provided on the inside back cover.

In the exploded view parts list, Reference Numbers may have additional information following the Reference Number.

A Tear Drop symbol will indicate an application of a “wet” product such as oil, and the number inside the Tear Drop will correspond to the description in the Parts List.

Also, a number inside a hexagon will be the torque value required, in foot pounds, on the associated Reference Number. Items shown in the parts list that do not have Reference Numbers are shown for reference purposes only and are NOT available for purchase.

Unless otherwise specified, all Cap Screws or Bolts are Grade 5, cadmium or zinc plated; Hexagon Nuts for Grade 5 Screws or Bolts are Grade B; Hexagon Nuts for other Screws or Bolts are Grade A.

AR ASSD ASSY CB CCW CP CS CTR CW DEG DIA FCS FHMS FL FLN FLS FW GA GR HD HN INCL JT LG LH LN LW M MM/mm NF PB PTO RH RHMS RPM RT SERR SHCS SHSS SN SQ T TFS THMS THRD WLDMT #

– As Required – Assembled – Assembly – Carriage Bolt – Counterclockwise – Cotter Pin – Cap Screw (Hexagon Head) – Center – Clockwise – Degree – Diameter – Flanged Cap Screw – Flat Head Machine Screw – Flanged – Flanged Lock Nut (Hexagon) – Flanged Lock Screw (Hexagon) – Flat Washer – Gauge – Grade – Hard or Head – Hex Nut – Includes – Joint – Large – Left Hand – Lock Nut – Lock Washer – Metric – Millimeter – National Fine – Plow Bolt – Power Take Off – Right Hand – Round Head Machine Screw – Revolutions Per Minute – Right – Serrated – Socket Head Cap Screw – Socket Head Set Screw – Serial Number or Slotted Nut – Square – Tooth or Teeth – Thread Forming Screw – Truss Head Machine Screw – Thread – Weldment – Number – Torque Required in foot pounds

NOTE:

The following abbreviations may be used herein:

– Indicates a Fluid Application

TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Front Cover Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Decal Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Drawbar & Tower Shields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Tower, Hitch & Hitchjack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Gearbox & Cutterbar Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 DC2340 - Cutterbar & Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11 DC2360 - Cutterbar & Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13 Rollers & Lower Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15 Left Top Roller Arm Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Right Top Roller Arm Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Left Conditioner Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19 Right Conditioner Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Roll Tension System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 DC2340 - Cutterbar & Skid Shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 DC2360 - Cutterbar & Skid Shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Right Trailer Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25 Left Trailer Assembly & Lift Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27 Drawbar Positioner Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Header to Trailer Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 DC2340 - Forming Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 DC2360 - Forming Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Deflector Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Transmission Cover & Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Lift Spring Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Transmission Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Left Door Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Right Door Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 DC2340 - Debris Skirts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DC2360 - Debris Skirts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DC2340 - Center Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 DC2360 - Center Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Driveline, Tractor to Tower (540 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-43 Driveline, Tower to Gearbox (540 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-45 Driveline, Tractor to Tower (1000 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-47 Driveline, Tower to Gearbox (1000 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-49 Overrunning Clutch (540 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Overrunning Clutch (1000 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 DC2340 - Cutterbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52–53 DC2360 - Cutterbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54-55 Gearbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-57 Axles & Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Hitchjack & Transport Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Hitch Extension Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Safety Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Alphabetical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63-68 Standard Hardware Torque specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover Printed in U.S.A.

1

907146/AP1195

DECAL LOCATIONS GENERAL INFORMATION

PAINT NOTICE Use this list to order paint for refinishing: 906315 One Gal. AG Red 906324 One Qt. Light Grey 906316 6 (12 oz. Spray Cans) AG Red 906325 6 (12 oz. Spray Cans) Light Grey

Decal Locations information is provided to assist in the proper selection and application of new decals, in the event the original decals become damaged or the machine is repainted. Refer to the listing for the illustration reference number, part number, description and quantity of each decal provided in the Kit. Refer to the appropriate illustrations for replacement locations.

The Decal Set Number for the DC2340 & DC2360 is 115867. The Set includes the following:

To insure proper selection of the correct replacement decals, compare all of the various closeup location drawings to your machine, before starting to refinish the unit. Then, circle each shown decal (on or otherwise applicable to your machine) while checking off its part number in the listing. After you have verified all the decals needed for replacement, place any extra unnecessary decals aside for disposal.

Ref. No. 1.

2.

3.

4.

5.

6.

7.

8.

NEW DECAL APPLICATION Surfaces MUST be free from dirt, dust, grease and other foreign material before applying the new Decal. To apply, remove the smaller portion of the decal backing paper and apply this part of the exposed adhesive backing to the clean surface while maintaining proper position and alignment. Peel the other portion of the backing paper off slowly while applying hand pressure to smooth out the Decal surface.

9.

10.

11.

12.

13.

14.

15.

16.

17.

CAUTION

18.

ALWAYS observe Safety Rules shown on Decals. If Decals become damaged, or the unit is painted, replace the Decals. If repainting, BE SURE that ALL Decals from the Kit(s) which apply to your machine, are affixed to your unit.

907146/AP1195

19.

20.

21.

22.

23.

24.

25.

2

Part No. 060510 060511 067493 091444 093366 093367 093373 093465 093466 093643 093653 094912 094913 094951 115974 125368 125476 126451 126453 126452 126454 126456 126457 126757 078580 078581 060138 120790

Description & Quantity Decal - Jack Storage Position Decal - Jack Lifting Position Red Reflector Strip (2 Places) DANGER – Rotating Drive Line (2 Places) Decal – Manual Location WARNING – Manual WARNING – General WARNING – 1000 RPM WARNING – 540 RPM DANGER – Moving (2 Places) WARNING – Rotating Drive Line Decal – Colorbar 12″ Decal – GEHL 3-1/4″ (3 Places) Decal – Made In USA WARNING – Block (2 Places) Decal – Disc Hardware DANGER – Rotating Knives (2 Places) Decal – 2340 Decal – 2360 Decal – 2340 & BAR Decal – 2360 & BAR Decal – GE Decal – HL Decal – Stripe 3/4″ x 10′ Manual Pouch (Not in Decal Kit) Blind Rivet (4) (Not in Decal Kit) Decal – Oil Level Decal – Hitch

Printed in U.S.A.

Center .25″ 1.0 1.75″

1″

18

Yellow To Front.

21

3″

23XX

.50 Typ.

This End Of Stripe Centered On Hole As Shown.

Back edge of Cover Typical Both Sides

12

9

Bottom Edge of Stripe

3

Weld Line

.25″ 2.25″

1″ 9

Skirt Line

14

1″

.25″

A A/ 2

VIEW A"

1″

8.75 .75

1/4″

3

12

NOTE: Stripe is 47.50".

Radius ends.

Line Up With CL of Hole.

14

24 (SEE VIEW A")

2″

2.0

3″ 16

.75″

.75

DC2340 = 15.12 DC2360 = 22.50 Typical Both Sides

13 (Center)

19 2.0″ Gap Between letters of Decals 19 & 20

20 23

22

.75″ 16

3″

15

5 (Center Between Bolt Holes)

Right End Disc With Plastic Plug.

Printed in U.S.A.

3

907146/AP1195

DECAL LOCATIONS (CONTINUED) 12.

13.

14.

15.

16.

17.

The Decal Set Number for the DC2340 & DC2360 is 115867. The Set includes the following: Ref. No. 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

Part No. 060510 060511 067493 091444 093366 093367 093373 093465 093466 093643 093653 094912

907146/AP1195

Description & Quantity Decal - Jack Storage Position Decal - Jack Lifting Position Red Reflector Strip (2 Places) DANGER – Rotating Drive Line (2 Places) Decal – Manual Location WARNING – Manual WARNING – General WARNING – 1000 RPM WARNING – 540 RPM DANGER – Moving (2 Places) WARNING – Rotating Drive Line Decal – Colorbar 12″

18.

19.

20.

21.

22.

23.

24.

25.

4

094913 094951 115974 125368 125476 126451 126453 126452 126454 126456 126457 126757 078580 078581 060138 120790

Decal – GEHL 3-1/4″ (3 Places) Decal – Made In USA WARNING – Block (2 Places) Decal – Disc Hardware DANGER – Rotating Knives (2 Places) Decal – 2340 Decal – 2360 Decal – 2340 & BAR Decal – 2360 & BAR Decal – GE Decal – HL Decal – Stripe 3/4″ x 10′ Manual Pouch (Not in Decal Kit) Blind Rivet (4) (Not in Decal Kit) Decal – Oil Level Decal – Hitch

Printed in U.S.A.

NOTE: Stripe is 61.75".

Radius ends.

21 6.5 4.5

17 (Center) 1 (Center in Front)

Center on Drawbar 6

7

12

11 Center

10

2.5 2.0

4.0

1.0

3.50

12.0 3/8"

25 (Centered on 6.00 wide Tube, READ from this side)

Yellow End To Left 1/4" Gap Typical

2 Centered Above Jacktube, READ From This Side

8 4

4

Printed in U.S.A.

5

907146/AP1195

DC2340/2360 - DRAWBAR & TOWER SHIELDS

15

22

19

18

21 15

16

20

12 7 6

23

17 1 9 13 14 30 11

10

24

NOTE: Shaft Has to be Centered Exactly In Between Bearings!

Ref. No.

Part No.

01

124610

DRAWBAR/ASSY . . . . . . . . . . . . . . . . . . . . 1

06

124475

SHAFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

07

124626

SHIELD/SHAFT . . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

09

124484

FLANGETTE . . . . . . . . . . . . . . . . . . . . . . . . 4

10

520092

BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 2

11

520093

COLLAR/BEARING . . . . . . . . . . . . . . . . . . 2

12

650704

CB 3/8X1 . . . . . . . . . . . . . . . . . . . . . . . . . . 12

13

654026

FW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

14

071703

LN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

15

112413

SHIELD/ASSY TOWER (INCL 17–22) . . . 2

Ref. No.

Part No.

17

040860

Description

Qty. Req.

CLIP/LUDWIG . . . . . . . . . . . . . . . . . . . . . . . 2 (AFTER SN5360–2340 & SN7300–2360)

18

079187

RIVET/BLIND . . . . . . . . . . . . . . . . . . . . . . . 2

19

126342

FLAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

20

650549

L #10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

21

650550

N #10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

22

650584

FW #10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

(AFTER SN5360–2340 & SN7300–2360) (AFTER SN5360–2340 & SN7300–2360) (AFTER SN5360–2340 & SN7300–2360) (AFTER SN5360–2340 & SN7300–2360) (AFTER SN5360–2340 & SN7300–2360) 23

650980

RHMS 10–24X3/8 . . . . . . . . . . . . . . . . . . . . 2

24

119503

EDGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

(AFTER SN5360–2340 & SN7300–2360) (AFTER SN5360–2340 & SN7300–2360) 126521a

(AFTER SN6500–2340 & SN8549–2360)

SHIELD/TOWER ASSY . . . . . . . . . . . . . . . 2

EDGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 (BEFORE SN5361–2340 & SN7301–2360) 16

650985

907146/AP1195

(BEFORE SN6501–2340 & SN8551–2360) a) For replacement order 112413.

TFS 5/16X3/4 . . . . . . . . . . . . . . . . . . . . . . . . 8

6

Printed in U.S.A.

DC2340/2360 - TOWER, HITCH & HITCHJACK 1

8

7

6 5 26 25

31

9

23 34

2

3 4

28 30

39 40

29 27

24 36

22

35

Before SN6101-2340 Before SN8151-2360

33

34

37

38

Ref. No.

Part No.

01

124543

02

650704

03

21

Ref. No.

Part No.

COVER/TOWER . . . . . . . . . . . . . . . . . . . . . 1

30

654032

LW 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

CB 3/8X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

31

655046

CP 5/32X1-3/4 . . . . . . . . . . . . . . . . . . . . . . . 1

654026

LW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

32

088841a

JACK/ASSY . . . . . . . . . . . . . . . . . . . . . . . . . 1

04

654006

FW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

33

655022

CP 3/16X1-3/4 . . . . . . . . . . . . . . . . . . . . . . . 1

05

653010

HN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

34

118254b

EXTENSION/DRAWBAR . . . . . . . . . . . . . . 1

06

059453

CLAMP/TUBE . . . . . . . . . . . . . . . . . . . . . . . 2

07

650781

CB 5/16X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . 2

08

071701

LN 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

09

056336

SPRING/EXTENSION . . . . . . . . . . . . . . . . 1

21

119805

LINCHPIN W/CHAIN . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

32

(AFTER SN6100–2340 & SN8150–2360) 089754c

EXTENSION/DRAWBAR . . . . . . . . . . . . . . 1 (BEFORE SN6101–2340 & SN8151–2360)

(AFTER SN6200–2340 & SN8250–2360) 220-32251

Qty. Req.

Description

LINCHPIN W/CHAIN . . . . . . . . . . . . . . . . . 1 (BEFORE SN6101–2340 & SN8401–2360)

35

124608

HITCH/ASSY . . . . . . . . . . . . . . . . . . . . . . . . 1

36

650694

CS 5/8X2-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 4

37

654032

LW 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

38

653021

HN 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

39

B11433A

HOOK/RELEASE CHAIN . . . . . . . . . . . . . . 1

22

089755

CS 1X4-1/4 . . . . . . . . . . . . . . . . . . . . . . . . . 1

23

650501

HN SLOTTED 1 . . . . . . . . . . . . . . . . . . . . . 1

40

220-32253 PIN/LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 655022

CP 3/16X1-3/4 . . . . . . . . . . . . . . . . . . . . . . . 1

120779

CLIP/PANEL . . . . . . . . . . . . . . . . . . . . . . . . 1

24

654016

FW 1 WIDE . . . . . . . . . . . . . . . . . . . . . . . . . 3

42

25

654057

LW 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

70

26

655024

CP 3/16X2 . . . . . . . . . . . . . . . . . . . . . . . . . . 1

27

089756

BOLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

28

653084

HN SLOTTED HEAVY 5/8 . . . . . . . . . . . . . 1

29

654012

FW 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Printed in U.S.A.

a) For individual components, see page titled Hitchjack and Transport Lights. b) For individual components, see page titled Hitch Extension Kit. c) Replaced by 126111.

7

907146/AP1195

DC2340/2360 - GEARBOX & CUTTERBAR DRIVE 7

8 9 Thick Shim Against Gearbox.

30 1

55 2 Install coarse end of Stud into Gearbox & torque. When torqued, Stud MUST be flush or through top of Gearbox casting.

10 75 4 12 11

12

3 4

4 75 14

75

5 13 28 17 4

25 27

Locate Bottom Of #26 .12 to .18" 26 From Top Of #21.

29 21

24 53 4 17

76 18 16

15 31

17

16

23

18 76

16 22 31

76 20

18 76

19

15 31 17

NOTE: Apply antiĆseize to all metal parts of #15. Do NOT distort #15 when torquing hardware.

Mounted On Cutterbar

907146/AP1195

8

Printed in U.S.A.

DC2340/2360 - GEARBOX & CUTTERBAR DRIVE Ref. No.

Part No.

01

097528a 097529a

Ref. No.

Part No.

GEARBOX/540 RPM . . . . . . . . . . . . . . . . . 1

17

656030

CS M14-2.00X55 GR8.8 . . . . . . . . . . . . . . . 9

GEARBOX/1000 RPM . . . . . . . . . . . . . . . . 1

18

071248

NUT/NYLON LOCK METRIC . . . . . . . . . . 9

656138

WASHER/LOCK M14 . . . . . . . . . . . . . . . . . 3

Description

Qty. Req.

Qty. Req.

Description

02

124966

STUD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

19

03

650494

CS 1/2X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

20

656113

CS M14-2.00X40 GR10.9 . . . . . . . . . . . . . 3

LOCTITE 271

21

098497

HORN/CUTTING . . . . . . . . . . . . . . . . . . . . 1

22

097582

SHAFT/DISC DRIVE . . . . . . . . . . . . . . . . . 1

04 05

H6208

WASHER/UNIVERSAL JOINT . . . . . . . . . 4

07

098221

SHIM/.125 . . . . . . . . . . . . . . . . . . . . . . . . . . 4

23

065054

PIN/SPRING . . . . . . . . . . . . . . . . . . . . . . . . 2

08

098222

SHIM/.062 . . . . . . . . . . . . . . . . . . . . . . . . . . 2

24

125441

SCREW/SELF-LOCKING . . . . . . . . . . . . . 2

09

115561

SHIM/.035 . . . . . . . . . . . . . . . . . . . . . . . . . . 2

25

125758

SHIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

10

650453

CS 1/2X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 2

26

125757

SHIELD/HALF . . . . . . . . . . . . . . . . . . . . . . . 2

11

654009

FW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

27

654024

LW 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

650687

CB 5/16X3/4 . . . . . . . . . . . . . . . . . . . . . . . . 6

071701

NUT/HEX LOCK 5/16 . . . . . . . . . . . . . . . . . 6

12

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

28

13

125753

BELL/ASSY . . . . . . . . . . . . . . . . . . . . . . . . . 1

29

14

653018

HN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

30

GEARLUBE 473

15

115563

COUPLER/ELASTIC . . . . . . . . . . . . . . . . . 2

31

COMPOUND/ANTI-SEIZE

16

115562

HUB/DRIVE . . . . . . . . . . . . . . . . . . . . . . . . . 2

Printed in U.S.A.

a) For Service Parts breakdown, see page titled Gearbox.

9

907146/AP1195

DC2340 - CUTTERBAR & DISCS (AFTER SN5600) L.H.

R.H. 9 90

220

9 90

9 90 220

Direction Of Knife Travel Top

6 6

3

4

8

8

Knife Orientation

R.H.

NOTE: Coned Washer,Install As Shown.

Bulge `UP' (Typical Installation) 220

5 Service #115556 R.H.

L.H. 8

10 R.H.

9 90

2

1

L.H. R.H.

3

6 L.H.

6

4

3

8

NOTE: If Blade Hits on the Top of Cutterbar When Disc is Rotated. Bend Blades Up Slightly With a Wrench. DO NOT USE A HAMMER! 3

4

Remove

NOTE: Check Weld Height On Bottom Of Cutterbar. To Be Less Than .20". If Higher Grind. *Remove Hardware As Shown In Fig. A".

Ref. No.

Part No.

01

098196ab

Front Of Cutterbar (Top View) Fig. A"

Ref. No.

Part No.

CUTTERBAR/7 DISC . . . . . . . . . . . . . . . . . 1

06

126744

BLADE/V-TYPE . . . . . . . . . . . . . . . . . . . . . 14

08

125448

BOLT/BLADE . . . . . . . . . . . . . . . . . . . . . . . 14

09

125445

NUT/LOCKING . . . . . . . . . . . . . . . . . . . . . 14

10

115564

PLUG/END . . . . . . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

02

115558

DISC/RIGHT . . . . . . . . . . . . . . . . . . . . . . . . 1

03

116668

DISC/ASSY CTR RT . . . . . . . . . . . . . . . . . 3

04

116669

DISC/ASSY CTR LT . . . . . . . . . . . . . . . . . . 2

05

115556

DISC/DRIVE . . . . . . . . . . . . . . . . . . . . . . . . 1

907146/AP1195

Description

Qty. Req.

a) For breakdown see page titled Cutterbar. b) Knives and Discs not included.

10

Printed in U.S.A.

DC2340 - CUTTERBAR & DISCS (BEFORE SN5601) L.H.

R.H. 220

9 90

9 90

9 90 220

Direction Of Knife Travel 7

6

3

4

8

5

8

Knife Orientation R.H.

NOTE: Coned Washer,Install As Shown.

Bulge `UP' (Typical Installation) 220

R.H.

L.H. 8

10 R.H.

9 90

2

1

L.H. R.H.

3

7 L.H.

6

4

3

8

3

Remove this hardware before installing new Cutterbar.

4

Front Of Cutterbar (Top View) Fig. A" Ref. No.

Part No.

01

098196ab

CUTTERBAR/7 DISC . . . . . . . . . . . . . . . . . 1

07

125447

BLADE/LEFT . . . . . . . . . . . . . . . . . . . . . . . . 6

02

115558

DISC/RIGHT . . . . . . . . . . . . . . . . . . . . . . . . 1

08

125448

BOLT/BLADE . . . . . . . . . . . . . . . . . . . . . . . 14

03

116668

DISC/ASSY CTR RT . . . . . . . . . . . . . . . . . 3

09

125445

NUT/LOCKING . . . . . . . . . . . . . . . . . . . . . 14

04

116669

DISC/ASSY CTR LT . . . . . . . . . . . . . . . . . . 2

10

115564

PLUG/END . . . . . . . . . . . . . . . . . . . . . . . . . 1

05

115556

DISC/DRIVE . . . . . . . . . . . . . . . . . . . . . . . . 1

06

125446

BLADE/RIGHT . . . . . . . . . . . . . . . . . . . . . . 8

Printed in U.S.A.

Description

Qty. Req.

Ref. No.

Part No.

Description

Qty. Req.

a) For breakdown see page titled Cutterbar. b) Knives and Discs not included.

11

907146/AP1195

DC2360 - CUTTERBAR & DISCS (AFTER SN7600) 9 90 R.H. 9

L.H.

220

220 9 90

Service #125461

Direction Of Knife Travel Top

6

6

3 6

4

8

8

8

L.H. R.H.

Knife Orientation

NOTE: Coned Washer,Install As Shown.

Bulge `UP' (Typical Installation) 220

5

10

R.H.

L.H. R.H.

1

9 90

2

L.H. R.H.

3

6

3

L.H.

4

4

NOTE: If Blade Hits on the Top of Cutterbar When Disc is Rotated. Bend Blades Up Slightly With a Wrench. DO NOT USE A HAMMER!

8

3

4

Remove this hardware before installing Cutterbar

NOTE: Check Weld Height On Bottom Of Cutterbar. To Be Less Than .20". If Higher Grind. *Remove Hardware As Shown In Fig. A".

Ref. No.

Part No.

01

098197ab

Front Of Cutterbar (Top View) Fig. A"

Ref. No.

Part No.

CUTTERBAR/8 DISC . . . . . . . . . . . . . . . . . 1

06

126744

BLADE/V–TYPE . . . . . . . . . . . . . . . . . . . . 16

08

125448

BOLT/BLADE . . . . . . . . . . . . . . . . . . . . . . . 16

Description

Qty. Req.

02

115558

DISC/END . . . . . . . . . . . . . . . . . . . . . . . . . . 1

03

116668

DISC/ASSY CTR RT . . . . . . . . . . . . . . . . . 3

04

116669

DISC/ASSY CTR LT . . . . . . . . . . . . . . . . . . 3

05

125461

DISC/DRIVE . . . . . . . . . . . . . . . . . . . . . . . . 1

907146/AP1195

Description

Qty. Req.

09

125445

NUT/LOCKING . . . . . . . . . . . . . . . . . . . . . 16

10

115564

PLUG/END . . . . . . . . . . . . . . . . . . . . . . . . . 1

a) For breakdown see page titled Cutterbar. b) Knives and Discs not included.

12

Printed in U.S.A.

DC2360 - CUTTERBAR & DISCS (BEFORE SN7601) 9 90 R.H.

L.H.

220

9

9 90

220 Direction Of Knife Travel

5

7

6

3 6

4

8

8

L.H. R.H.

NOTE: Coned Washer,Install As Shown.

Bulge `UP' (Typical Installation) 220

10

L.H.

R.H.

9 90

2

R.H.

Knife Orientation

1

L.H. R.H.

3

7

4

3

L.H.

4

8

3

Remove this hardware before installing new Cutterbar.

4

Front Of Cutterbar (Top View) Fig. A" Ref. No.

Part No.

Ref. No.

Part No.

01

098197ab

CUTTERBAR/8 DISC . . . . . . . . . . . . . . . . . 1

07

125447

BLADE/LEFT . . . . . . . . . . . . . . . . . . . . . . . . 8

02 03

115558

DISC/END . . . . . . . . . . . . . . . . . . . . . . . . . . 1

08

125448

BOLT/BLADE . . . . . . . . . . . . . . . . . . . . . . . 16

116668

DISC/ASSY CTR RT . . . . . . . . . . . . . . . . . 3

09

125445

NUT/LOCKING . . . . . . . . . . . . . . . . . . . . . 16

04

116669

DISC/ASSY CTR LT . . . . . . . . . . . . . . . . . . 3

10

115564

PLUG/END . . . . . . . . . . . . . . . . . . . . . . . . . 1

05

125461

DISC/DRIVE . . . . . . . . . . . . . . . . . . . . . . . . 1

06

125446

BLADE/RIGHT . . . . . . . . . . . . . . . . . . . . . . 8

Printed in U.S.A.

Description

Qty. Req.

Description

Qty. Req.

a) For breakdown see page titled Cutterbar. b) Knives and Discs not included.

13

907146/AP1195

DC2340/2360 - ROLLERS & LOWER BEARINGS NOTE: Item 25 is to be placed in all bolt holes and to outline the edge of Item 4.

An oilĆtight seal is required.

18

75

17 16 5

NOTE: Do Not Lock Collars (Items 12 & 18) or Torque Nuts (Item 14) On Flangettes Until AFTER Rollers are Aligned.

6

4 25

22

7 8

14 13

9

24

25

23

Keyed End 1 3

15

19 21 Rollers 2 NOTE: Use Caution When Installing Rollers, You May Damage Item #4

3

24 23 22

1 NOTE: Place in Before Rollers and Duct Tape into Position.

20

21

2

9

13

10

14

75

12

Keyed End 11

907146/AP1195

14

Printed in U.S.A.

DC2340/2360 - ROLLERS & LOWER BEARINGS Ref. No.

Part No.

Ref. No.

Part No.

01

650834

02

125502

CB 1/2X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 8

13

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

ROLLER/TICOR LOW RT SPIRAL (2340) 1

14

653018

HN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

125353

ROLLER/TICOR LOW RT SPIRAL (2360

1

15

117038

FLANGETTE/ASSY 85 MM . . . . . . . . . . . . 1

125503

ROLLER/TICOR UPP LT SPIRAL (2340)

1

16

089872

BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1

125354

ROLLER/TICOR UPP LT SPIRAL (2360)

1

17

077601

RETAINER/BEARING 85MM . . . . . . . . . . . 1

04

124906

SHEET/RT . . . . . . . . . . . . . . . . . . . . . . . . . . 1

18

520195

COLLAR/BEARING . . . . . . . . . . . . . . . . . . 1

05

650758

CB 1/4X3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . 9

06

654002

FW 1/4 WIDE . . . . . . . . . . . . . . . . . . . . . . . . 9

19

124954

SHIELD/ROLL ASSY RT . . . . . . . . . . . . . . 1

07

654022

LW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

20

124955

SHIELD/ROLL ASSY LT . . . . . . . . . . . . . . 1

21

650786

CB 3/8X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . . 6

03

Description

Qty. Req.

Qty. Req.

Description

08

653005

HN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

09

117039

FLANGETTE/ASSY 100 MM . . . . . . . . . . . 1

22

654006

FW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

10

089871

BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1

23

654026

LW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

11

010-32322

FLANGETTE/100 MM . . . . . . . . . . . . . . . . . 1

24

653010

HN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

12

089867

COLLAR/BEARING . . . . . . . . . . . . . . . . . . 1

25

Printed in U.S.A.

15

SEALANT/SILICONE (CLEAR)

907146/AP1195

DC2340/2360 - LEFT TOP ROLLER ARM ASSEMBLY

13

15 14

8 1

NOTE: Do Not Torque Nuts (Item 7) Until AFTER Rollers are Aligned.

3

4 9

5 6

10 2

11 12

Ref. No.

Part No.

01

650926

02

124910

03 04

7 75

Ref. No.

Part No.

PB 1/2X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 4

10

124905

SHIELD/METAL . . . . . . . . . . . . . . . . . . . . . . 1

ARM/ASSY LT . . . . . . . . . . . . . . . . . . . . . . . 1

11

654026

LW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

117038

FLANGETTE/ASSY 85 MM . . . . . . . . . . . . 1

12

653010

HN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

089872

BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1

13

070643

LINK/PLAIN . . . . . . . . . . . . . . . . . . . . . . . . . 1

05

077601

RETAINER/BEARING 85MM . . . . . . . . . . . 1

14

092082

BLOCK/CHAIN ASSY . . . . . . . . . . . . . . . . 1

06

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

15

125077

CHAIN/ROLL TENSION (2340) . . . . . . . . 1

07

653018

HN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

(INCLUDES 2 PLAIN CONNECTORS 500214)

08

650802

FCS 3/8X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . 3

125374

09

124904

SHIELD/PLASTIC . . . . . . . . . . . . . . . . . . . . 1

(INCLUDES 2 PLAIN CONNECTORS 500214)

907146/AP1195

Description

Qty. Req.

16

Description

Qty. Req.

CHAIN/ROLLER (2360) . . . . . . . . . . . . . . . 1

Printed in U.S.A.

DC2340/2360 - RIGHT TOP ROLLER ARM ASSEMBLY 14 15

13

8

9

NOTE: Do Not Torque Nuts (Item 7) Until AFTER Rollers are aligned.

29

25 75 2

24

Sprocket Faces MUST Be Parallel and in Line + _ 1/16"

23

1

16

11

18

12

30

27

19 20

6

6 7 75

3 4

28 75

5

Ref. No.

Part No.

01

650926

PB 1/2X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 4

02

118760

ARM/ASSY RT . . . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

ARM/ASSY RT . . . . . . . . . . . . . . . . . . . . . . 1

03

117038

FLANGETTE/ASSY 85 MM . . . . . . . . . . . . 1

04

089872

BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1

05

077601

RETAINER/BEARING 85MM . . . . . . . . . . . 1

06

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

07

653018

HN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

08

650802

FCS 3/8X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . 3

09

125078

SHIELD/PLASTIC RT . . . . . . . . . . . . . . . . . 1

11

654026

LW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

12

653010

HN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

13

070643

LINK/PLAIN . . . . . . . . . . . . . . . . . . . . . . . . . 1

14

092082

BLOCK/CHAIN ASSY . . . . . . . . . . . . . . . . 1

Printed in U.S.A.

17

20

22 21 75

Part No.

15

125077 CHAIN/ROLL TENSION (2340) . . . . . . . .

(INCL 2 PLAIN CONNECTORS 500214) 125374 CHAIN/ROLLER (2360) . . . . . . . . . . . . . . .

(INCLUDES 2 PLAIN CONNECTORS 500214) 124915 ARM/IDLER ASSY . . . . . . . . . . . . . . . . . . .

059450 WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . .

124773 SPROCKET/IDLER ASSY . . . . . . . . . . . . .

654032 LW 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

650694 CS 5/8X2-1/2 . . . . . . . . . . . . . . . . . . . . . . . .

LOCTITE 271 124655 SPRING/EXTENSION . . . . . . . . . . . . . . . .

065756 WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . .

650631 CS 5/8X4 . . . . . . . . . . . . . . . . . . . . . . . . . . .

071709 NUT/HEX LOCK . . . . . . . . . . . . . . . . . . . . .

055447 WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . .

650495 CS 1/2X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . .

GREASE/GUN 242 LITHIUM 051905 RING/RETAINING . . . . . . . . . . . . . . . . . . .

(AFTER SN5650–2340 & SN7650–2360)

16 18 19 20 21 22 23 24 25 26 27 28 29 30

(BEFORE SN5651–2340 & SN7651–2360)

19

Ref. No.

(AFTER SN5650–2340 & SN7650–2360) 124890

26 22

18

Description

Qty. Req. 1 1 1 4 2 2 1 1 1 1 1 1 1 1

907146/AP1195

DC2340/2360 - LEFT CONDITIONER ASSEMBLY

Spring Height After Installation 13

25 28

30 29

3.62 Install Washer (Item 18) With Bulge Towards Bracket 18

21 22

23 24 12

19 20 26

27

13 75 38

NOTE: Do Not Lock Collar (Item 14) until rollers have been properly aligned.

2

3

Belt Path

11

33

34 12 35 110

A 32

32

36 1

14

31

15 16

7 12 35 110

33

907146/AP1195

34

4

A 8 (AR)

NOTE: Tighten (Item 4) and 17 6 determine If Shims are required.

18

12 13

37

10

75

Printed in U.S.A.

DC2340/2360 - LEFT CONDITIONER ASSEMBLY Ref. No.

Part No.

01

080477

02

125094

Ref. No.

Part No.

BUSHING/BRONZE . . . . . . . . . . . . . . . . . . 1

22

097668

SPACER/BELT IDLER . . . . . . . . . . . . . . . . 1

CS 3/4NFX2-3/4 GR8 . . . . . . . . . . . . . . . . . 1

23

099112

IDLER/BELT . . . . . . . . . . . . . . . . . . . . . . . . 1

079003

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

Qty. Req.

Description

03

653029

HN 3/4NF . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

24

04

650479

CS 3/4X2-3/4 . . . . . . . . . . . . . . . . . . . . . . . . 1

25

650711

CS 3/4X3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

BUSHING/PIVOT . . . . . . . . . . . . . . . . . . . . 1

26

069226

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

097667

BUSHING/BELT PIVOT . . . . . . . . . . . . . . . 1

06

092079

07

097546

PLATE/ROLL PIVOT . . . . . . . . . . . . . . . . . 1

27

08

098259

SHIM/ROLL PIVOT . . . . . . . . . . . . . . . . . . . 2

28

654014

FW 3/4 WIDE . . . . . . . . . . . . . . . . . . . . . . . . 1

29

380-25728

SPRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

30

654009

FW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

651148

FW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

31

124619

V-BELT/4V-B . . . . . . . . . . . . . . . . . . . . . . . . 1

10

064331

NUT/HEX LOCK . . . . . . . . . . . . . . . . . . . . . 1

11

650834

CB 1/2X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 2

12

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

13

653018

HN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

14

520195

COLLAR/BEARING . . . . . . . . . . . . . . . . . . 1

15

044090

SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

32

066895

KEY/TRANSMISSION . . . . . . . . . . . . . . . . 2

16

056640

RING/RETAINING . . . . . . . . . . . . . . . . . . . 1

33

124690

SHEAVE/ASSY (TAPER) . . . . . . . . . . . . . . 2

GREASE/GUN 242 LITHIUM

34

057557

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

17

(AFTER SN6100–2340 & SN8150–2360) (BEFORE SN6101–2340 & SN8151–2360)

18

055142

WASHER/SPRING . . . . . . . . . . . . . . . . . . . 1

35

651277

CS 1/2X1-1/2 GR8 . . . . . . . . . . . . . . . . . . . 2

19

600595

CS 1/2X11 . . . . . . . . . . . . . . . . . . . . . . . . . . 1

36

653053

HUT/HEX JAM 3/4NF . . . . . . . . . . . . . . . . . 1

20

651275

PB 1/2X4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

37

651148

FW 1/2 NARROW . . . . . . . . . . . . . . . . . . . . 2

21

097662

PLATE/IDLER (BELT) . . . . . . . . . . . . . . . . . 1

38

653026

HN 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Printed in U.S.A.

19

907146/AP1195

DC2340/2360 - RIGHT CONDITIONER ASSEMBLY 16

NOTE: Tighten (Item 4) And Determine If Shims Are Required.

14

Lightly Oil Shaft.

17

8 (AR)

18

4

7

19 110

A

25 11

12 13 75 15 6

24 A

1 23

1

22

21

10

2 3

11

12

20

5

7

9

4

3

10

8

Chain Path

6

12 2 Bolt Tightening Sequence For Sprocket (Item 20)

NOTE: Use 25 On All Weld Seams And Mounting Hardware Openings That May Allow Oil To Leak Through In The Chain Case Area.

Ref. No.

Part No.

01

080477

BUSHING/BRONZE . . . . . . . . . . . . . . . . . . 1

15

02

125094

CS 3/4XNFX2-3/4 GR8 . . . . . . . . . . . . . . . 1

16

066895

KEY/TRANSMISSION . . . . . . . . . . . . . . . . 1

03

653029

HN 3/4NF . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

17

124692

SPROCKET/ASSY (TAPER) . . . . . . . . . . . 1

04

650479

CS 3/4X2-3/4 . . . . . . . . . . . . . . . . . . . . . . . . 1

18

057557

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

06

092079

BUSHING/PIVOT . . . . . . . . . . . . . . . . . . . . 1

19

651277

CS 1/2X1-1/2 GR.8 . . . . . . . . . . . . . . . . . . . 1

07

097546

PLATE/ROLL PIVOT . . . . . . . . . . . . . . . . . 1

20

115726

SPROCKET/24T . . . . . . . . . . . . . . . . . . . . . 1

08

098259

SHIM/ROLL PIVOT . . . . . . . . . . . . . . . . . . . 2

21

115727

ELEMENT/LOCKING 1.750 DIA . . . . . . . . 1

10

064331

NUT/HEX LOCK . . . . . . . . . . . . . . . . . . . . . 1

22

124649

CHAIN/ROLLER . . . . . . . . . . . . . . . . . . . . . 1

11

650834

CB 1/2X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 2

12

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

23

653053

NUT/HEX JAM 3/4NF . . . . . . . . . . . . . . . . . 1

13

653018

HN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

24

651148

FW 1/2 NARROW . . . . . . . . . . . . . . . . . . . . 2

14

520195

COLLAR/BEARING . . . . . . . . . . . . . . . . . . 1

25

907146/AP1195

Description

Qty. Req.

Ref. No.

Part No.

Description

Qty. Req.

GREASE/GUN 242 LITHIUM

(INCLUDES PLAIN CONNECTOR 075951)

20

SEALANT/SILICONE (CLEAR)

Printed in U.S.A.

DC2340/2360 - ROLL TENSION SYSTEM 2 13 30 4

3 1

2 13

1

3

5

6

11 7 8

4 30 10 9

11

12

Ref. No.

Part No.

01

300-31903

02

124909

03

650528

CS 3/8X2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

04

071703

LN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

05

200-32344

CONNECTOR/ROLL SPRING . . . . . . . . . 1

06

380-32262

SPRING/EXTENSION . . . . . . . . . . . . . . . . 1

12

07

030-31859

ADJUSTING BOLT R.H. . . . . . . . . . . . . . . 1

13

Printed in U.S.A.

Ref. No.

Part No.

CHAIN ROLLER ASSY . . . . . . . . . . . . . . . 2

08

653021

HN 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

09

200-32337

TURNBUCKLE . . . . . . . . . . . . . . . . . . . . . . 1

10

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

11

21

Qty. Req.

Description

GREASE/GUN 242 LITHIUM 030-31861

ADJUSTING BOLT L.H. . . . . . . . . . . . . . . . 1 COMPOUND/ANTI-SEIZE

907146/AP1195

DC2340 - CUTTERBAR & SKID SHOES NOTE: Add Loctite 271 and Torque down Cutterbar Hardware After Gearbox is properly installed and aligned.

5 19

Hand Torque 50 17

21

1 15 19 4 19 8

18

16

18 20 20

A 18

3

30 6 Hand Torque

20 13 75

12

20

A

7

11 75 10

Cutterbar 9 Skidplate

Frame Assemble Front of Skidplate To Frame as Shown.

Ref. No.

Part No.

01

126412

03

126444

04

Install Hardware With Bolt on Inside and Nut on Outside on the Left End Skid Shoe Only. As Shown Above.

Ref. No.

Part No.

FRAME/HEADER ASSY . . . . . . . . . . . . . . 1

12

650318

FCS 1/2X1-1/4 . . . . . . . . . . . . . . . . . . . . . . 14

SHIM/SIDE BLOCK . . . . . . . . . . . . . . . . . . 2

13

071706

NUT/HEX LOCK . . . . . . . . . . . . . . . . . . . . 14

650535

CS 3/8X2-1/4 . . . . . . . . . . . . . . . . . . . . . . . . 6

15

650409

CS 7/16X2-1/4 . . . . . . . . . . . . . . . . . . . . . . . 2

05

650534

CS 7/16X2 . . . . . . . . . . . . . . . . . . . . . . . . . . 2

16

062335

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

06

071703

LN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

07

124900

SHOE/SKID ASSY . . . . . . . . . . . . . . . . . . . 7

17

071705

NUT/HEX LOCK . . . . . . . . . . . . . . . . . . . . . 4

08

650834

CB 1/2X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . 10

18

071187

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

09

654009

FW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

19 654006

FW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

654046

FW 7/16 WIDE . . . . . . . . . . . . . . . . . . . . . . . 4

Description

Qty. Req.

10

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

20

11

653018

HN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

21

907146/AP1195

22

Description

Qty. Req.

LOCTITE 271

Printed in U.S.A.

DC2360 - CUTTERBAR & SKID SHOES NOTE: Add Loctite 271 and Torque down Cutterbar Hardware After Gearbox is properly installed and aligned.

5 19 Hand Torque 50 17 14

1 15 19 4 19

18

8

21

16

20 20

A

30 6

3

Hand Torque

18

18 20

13 75

12 A

7

20

18

11 75

Cutterbar

10 9

Skidplate

Frame

Install Hardware With Bolt on Inside and Nut on Outside on the Left End Skid Shoe Only. As Shown Above.

Assemble Front of Skidplate To Frame as Shown.

Ref. No.

Part No.

Ref. No.

Part No.

01

126413

03

126444

FRAME/HEADER ASSY . . . . . . . . . . . . . . 1

12

650318

FCS 1/2X1-1/4 . . . . . . . . . . . . . . . . . . . . . . 16

SHIM/SIDE BLOCK . . . . . . . . . . . . . . . . . . 2

04

13

071706

LN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

650535

CS 3/8X2-1/4 . . . . . . . . . . . . . . . . . . . . . . . . 7

15

650409

CS 7/16X2-1/4 . . . . . . . . . . . . . . . . . . . . . . . 2

05

650534

CS 7/16X2 . . . . . . . . . . . . . . . . . . . . . . . . . . 2

16

062335

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

06

071703

LN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

07

124900

SHOE/SKID ASSY . . . . . . . . . . . . . . . . . . . 8

17

071705

NUT/HEX LOCK . . . . . . . . . . . . . . . . . . . . . 4

08

650834

CB 1/2X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . 12

18

071187

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description

Qty. Req.

Description

Qty. Req.

09

654009

FW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

19

10

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

20

654006

FW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

11

653018

HN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

21

654046

FW 7/16 WIDE . . . . . . . . . . . . . . . . . . . . . . . 4

Printed in U.S.A.

23

LOCTITE 271

907146/AP1195

DC2340/2360 - RIGHT TRAILER ASSEMBLY

NOTE: Adjust Bolt to 2.50 Between

37 34

Top Locking Nut and Underside of Frame.

33

18 17 37 19 17

16 Connect Hose Before Installation.

30 8 7

32 23 22 23 21

9

6 36

26 28 4

26 28

39

3

37

5 36

13 12 10 11 18 20 19 17

39

25

27 36

37 24

On Ball

14

1

29 13 30 35 110

NOTE: Chain Must Pivot Freely After Hardware Has Been T ightened.

31

907146/AP1195

24

Printed in U.S.A.

DC2340/2360 - RIGHT TRAILER ASSEMBLY Ref. No.

Part No.

01

124604

CHAIN/LIFT . . . . . . . . . . . . . . . . . . . . . . . . . 1

22

126022

SPRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

03

651164

CS 1/2X2-1/4 GR8 . . . . . . . . . . . . . . . . . . . 1

23

230-27100

PLUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

04

071706

LN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

24

124636

ARM/PUSH ASSY RT . . . . . . . . . . . . . . . . 1

05

220-32515

WHEEL PIN WLDMT . . . . . . . . . . . . . . . . . 1

25

570019

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

06

650491

CS 3/8X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . . 1

26

400-32443

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

07

654006

FW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

27

220-32518

PIN,PIVOT,RH . . . . . . . . . . . . . . . . . . . . . . . 1

08

071703

LN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

28

655018

CP 3/16X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . 2

09

570002

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

29

480-27676

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

Ref. No.

Part No.

Qty. Req.

Description

10

200-32504

LINK TRANSPORT . . . . . . . . . . . . . . . . . . . 1

30

310-32513

CS 5/8X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

11

400-21904

WASHER, 20 GA 1-9/32X1-7/8 . . . . . . . . . 1

31

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

12

480-27676

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

32

653026

HN 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

13

654032

LW 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

33

654014

FW 3/4 WIDE . . . . . . . . . . . . . . . . . . . . . . . . 2

14

651123

CS 5/8X1 GR8 . . . . . . . . . . . . . . . . . . . . . . . 1

34

030-17662

CS 3/4X10 GR8 . . . . . . . . . . . . . . . . . . . . . . 1

16

117086a

CYLINDER/HYDRAULIC . . . . . . . . . . . . . . 1

35

LOCTITE 271

17

220-32519

PIN/UPPER . . . . . . . . . . . . . . . . . . . . . . . . . 1

36

GREASE/GUN 242 LITHIUM

18

650577

CS 5/16X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . 2

37

19

071701

LN 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

39

20

220-32520

PIN/LOWER . . . . . . . . . . . . . . . . . . . . . . . . 1

21

126023

BRACKET/SPRING ASSY . . . . . . . . . . . . 1

Printed in U.S.A.

COMPOUND/ANTI-SEIZE 651148

FW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 (AFTER SN6100–2340 & SN8150–2360)

a) For Seal Kit order 093105.

25

907146/AP1195

DC2340/2360 - LEFT TRAILER ASSEMBLY & LIFT HYDRAULICS

NOTE: Adjust Bolts in Positions A & B" (DC2340 = 2.25″, DC2360 = 2.62″) between Top Locking Nut and Underside of Frame.

CL of Slots

Yoke

Bolt

28

52 32

31 42 5

48

49

60

A

51

4 64 3

6.03 Installed

AB

28 29

61 51

21

6

52

30

38

7 52 19

41 36

40 39

B

5.28 Installed

59

66

31

20

NOTE: Adjust Yoke Ass'y (Item 38) So That Bolt (Item 41) is P ositioned all the Way Forward in the Slot.

29

37

27 28

18

23

33 51 34

52 26

23

64

8 10

9 30 30 35

12

14 15

907146/AP1195

1

20

11

22 52

13

21 17

25 110 50 24

55 52 On Item 55, Ball Pivot

NOTE: Chain Must Be Free To Pivot When HardwareHas Been Tightened.

26

Printed in U.S.A.

DC2340/2360 - LEFT TRAILER ASSEMBLY & LIFT HYDRAULICS 5

56 51 58 57 65

16

65 Ref. No.

Part No.

01

124604

CHAIN/LIFT . . . . . . . . . . . . . . . . . . . . . . . . . 1

03

651164

CS 1/2X2-1/4 . . . . . . . . . . . . . . . . . . . . . . . . 1

04

071706

LN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

05

124620

TRAILER/FRAME ASSY (2340) . . . . . . . . 1

125350

FRAME/TRAILER ASSY (2360) . . . . . . . . 1

06

220-32515

WHEEL PIN WLDMT . . . . . . . . . . . . . . . . . 1

07

650491

CS 3/8X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . . 1

08

654006

FW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

09

071703

LN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

10

570002

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

11

200-32504

LINK TRANSPORT . . . . . . . . . . . . . . . . . . . 1

12

400-21904

WASHER/20 GA 1-9/32X1-7/8 . . . . . . . . . 1

13

480-27676

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

14

654032

LW 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

15

651123

CS 5/8X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

16

Description

Qty. Req.

124654

HOSE/ASSY (118”)(2340) . . . . . . . . . . . . . 1

125359

HOSE/ASSY (133”)(2360) . . . . . . . . . . . . . 1

17

125421

HOSE/ASSY (224”) . . . . . . . . . . . . . . . . . . 1

18

117085a

CYLINDER/HYDRAULIC . . . . . . . . . . . . . . 1

19

220-32519

PIN/UPPER . . . . . . . . . . . . . . . . . . . . . . . . . 1

20

650577

CS 5/16X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . 2

21

071701

LN 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

22

220-32520

PIN/LOWER . . . . . . . . . . . . . . . . . . . . . . . . 1

23

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 3

24

125882

SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

25

125883

CS 5/8X2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

26

030-31904

”U”-BOLT . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

27

200-32507

PIVOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Printed in U.S.A.

18

17

Ref. No.

Part No.

28 29

653026 385-27865 230-27100 380-32350 126022 654014 030-17662 220-32517 081377 070856 124634 570019 124632 045-31407 360-32499 650406 654034 047269 650985

30 31 32 33 34 35 36 37 38 39 40 41 42 48 49 50 51 52 55 56 57 58 59 60 61 64 65 66

Description

Qty. Req.

HN 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PLUG SPRING (2340) . . . . . . . . . . . . . . . .

PLUG (2360) . . . . . . . . . . . . . . . . . . . . . . . .

SPRING/EXTENSION (2340) . . . . . . . . . .

SPRING (2360) . . . . . . . . . . . . . . . . . . . . . .

FW 3/4 WIDE . . . . . . . . . . . . . . . . . . . . . . . .

CS 3/4X10 GR8 . . . . . . . . . . . . . . . . . . . . . .

SPRING PIVOT PIN WLDMT . . . . . . . . . .

SCREW/HEX FLANGE LOCK . . . . . . . . .

NUT/HEX LG FL SERR LOCK . . . . . . . . .

LINK/THIRD . . . . . . . . . . . . . . . . . . . . . . . . .

FITTING/GREASE . . . . . . . . . . . . . . . . . . .

YOKE/ASSY . . . . . . . . . . . . . . . . . . . . . . . .

BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . .

SPACER/REAR . . . . . . . . . . . . . . . . . . . . . .

CS 3/4X4-1/2 . . . . . . . . . . . . . . . . . . . . . . . .

LW 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SOCKET/SIGN MOUNTING . . . . . . . . . . .

TFS 5/16X3/4 . . . . . . . . . . . . . . . . . . . . . . . .

LOCTITE 271 GREASE/GUN 242 LITHIUM COMPOUND/ANTI-SEIZE 124646 ARM/PUSH ASSY LT . . . . . . . . . . . . . . . . .

220-32514 PIN WLDMT . . . . . . . . . . . . . . . . . . . . . . . . .

650650 CS 1/2X3-1/2 . . . . . . . . . . . . . . . . . . . . . . . .

071706 LN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

653130 HN 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

654016 FW 1 WIDE . . . . . . . . . . . . . . . . . . . . . . . . .

125367 STRIP/TRIM . . . . . . . . . . . . . . . . . . . . . . . .

651148 FW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

045-31404 BUSHING/OILITE . . . . . . . . . . . . . . . . . . . .

076002 FITTING/GREASE . . . . . . . . . . . . . . . . . . .

3 4 4 2 2 6 2 1 1 1 1 2 1 1 2 1 1 1 2

1 1 1 1 2 1 2 2 2 1

a) For Seal Kit order 093110.

27

907146/AP1195

DC2340/2360 - DRAWBAR POSITIONER HYDRAULICS

12 10

12

16 13

11

15 11

14

17 12

14 16

Ref. No.

Part No.

10

125347

ELBOW/HYD FITTING 90 DEG . . . . . . . . 1

16

TIE/NYLON (BUY LOCALLY) . . . . . . . . . . 2

11

097918

PIN/CYLINDER . . . . . . . . . . . . . . . . . . . . . . 2

17

124600abc CYLINDER/HYDRAULIC (2340) . . . . . . . . 1

12

074090

PIN/SPRING . . . . . . . . . . . . . . . . . . . . . . . . 4

Description

Qty. Req.

13

068938

ELBOW/HYD FITTING 90 DEG . . . . . . . . 1

14

125420

HOSE/ASSY (192″) . . . . . . . . . . . . . . . . . . 2

15

125348

VALVE/HYDRAULIC . . . . . . . . . . . . . . . . . . 1

907146/AP1195

Ref. No.

Part No.

Description

Qty. Req.

(BEFORE SN5651–2340 & SN7651–2360) 125410a

CYLINDER/HYDRAULIC (2360) . . . . . . . . 1

a) For Seal Kit order 084159. b) For internal Travel Limiting Spacer order 125346. c) Replaced by 112795.

28

Printed in U.S.A.

DC2340/2360 - HEADER TO TRAILER ASSEMBLY

24

20 25 19

17 18

15

26 21 75

20 14

4

5

6 7

19

13

8 30

75 21

19

24

19

12

55 22 11

23 25

21 75

9 10

20

3 23

75 21 26

20 Exploded off Trailer For Clarification.

Ref. No.

Part No.

03

045-31406

04

124651

05

650786

Chain Must Be Free To Pivot On Leg And Frame After Hardware Has Been Tightened.

Ref. No.

Part No.

BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . 2

15

650709

CS 3/4X4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

PIN/PUSH ARM ASSY LT . . . . . . . . . . . . . 1

17

654034

LW 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

CB 3/8X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . . 1

18

653026

HN 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

20

650453

CS 1/2X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 4 (AFTER SN6100–2340 & SN8150–2360)

650569

CS 1/2X1-3/4 . . . . . . . . . . . . . . . . . . . . . . . . 4

071706

(BEFORE SN6101–2340 & SN8151–2360) LN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description

Qty. Req.

Qty. Req.

Description

06

654006

FW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

07

654026

LW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

08

653010

HN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

09

057557

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

10

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

22

11

098828

CS 1/2X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

23

12

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

24

651164

CS 1/2X2-1/4 GR8 . . . . . . . . . . . . . . . . . . . 2

13

045-31407

BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . 1

25

071706

LN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

14

360-32500

SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

26

651148

FW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Printed in U.S.A.

21

29

LOCTITE 271 GREASE/GUN 242 LITHIUM

907146/AP1195

DC2340 - FORMING CHAMBER

12 11

1

15

6 17 5 22 4

14 7 6 5

10

4

2 21

12

3 8

11

15

7

14

15 4

7

5 7 10

13 4

6 17

5 17

9

6

NOTE: Wherever Item 15 is used Item 13 (Clamp) should be added on this side.

Ref. No.

Part No.

Ref. No.

Part No.

01

124870

02

124871

CHAMBER/FORMING ASSY RT . . . . . . . 1

11

125081

WASHER/PLASTIC .50 . . . . . . . . . . . . . . . 2

CHAMBER/FORMING ASSY LT . . . . . . . . 1

12

125080

NUT/ADJUSTER .50 . . . . . . . . . . . . . . . . . 2

03 04

650969

CB 5/16X5/8 . . . . . . . . . . . . . . . . . . . . . . . . 4

13

097859

CLAMP/HOSE . . . . . . . . . . . . . . . . . . . . . . . 3

654004

FW 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

14

095196

GROMMET . . . . . . . . . . . . . . . . . . . . . . . . . 2

05

654024

LW 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

06

653007

HN 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

07

650573

CB 5/16X1 . . . . . . . . . . . . . . . . . . . . . . . . . . 11

08

124876

WINDROWER/ASSY RT . . . . . . . . . . . . . . 1

09

124877

10

650834

907146/AP1195

Description

Qty. Req.

Description

Qty. Req.

(AFTER SN5750–2340 & SN8150–2360) 420-33066

GROMMET . . . . . . . . . . . . . . . . . . . . . . . . . 2

15

650745

CB 516/1-1/4 . . . . . . . . . . . . . . . . . . . . . . . . 3

WINDROWER/ASSY LT . . . . . . . . . . . . . . 1

21

650687

CB 5/16X3/4 . . . . . . . . . . . . . . . . . . . . . . . . 2

CB 1/2X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 2

22

210-19470

FLN 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

(BEFORE SN6001–2340 & SN8001–2360)

30

Printed in U.S.A.

DC2360 - FORMING CHAMBER 12 11

1

15

6 17 5 22 4

14 7 6 5

10

4

2 21

12

3 8

11

15

7

14

15 4

7

5 7 10

13 4

6 17

5 17

9

6

NOTE: Wherever Item 15 is used Item 13 (Clamp) should be added on this side.

Ref. No.

Part No.

Ref. No.

Part No.

01

125370

02

125371

CHAMBER/FORMING ASSY RT . . . . . . . 1

11

125081

WASHER/PLASTIC 1/2 . . . . . . . . . . . . . . . 2

CHAMBER/FORMING ASSY LT . . . . . . . . 1

12

125080

03

NUT/ADJUSTER 1/2 . . . . . . . . . . . . . . . . . 2

650969

CB 5/16X5/8 . . . . . . . . . . . . . . . . . . . . . . . . 5

13

097859

CLAMP/HOSE . . . . . . . . . . . . . . . . . . . . . . . 3

04

654004

FW 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

14

095196

GROMMET . . . . . . . . . . . . . . . . . . . . . . . . . 2

05

654024

LW 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

06

653007

HN 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

420-33066

GROMMET . . . . . . . . . . . . . . . . . . . . . . . . . 2

07

650573

CB 5/16X1 . . . . . . . . . . . . . . . . . . . . . . . . . 13

08

125376

WINDROWER/ASSY RIGHT . . . . . . . . . . 1

15

650745

09

125377

WINDROWER/ASSY LEFT . . . . . . . . . . . . 1

21

650687

CB 5/16X3/4 . . . . . . . . . . . . . . . . . . . . . . . . 2

10

650834

CB 1/2X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 2

22

210-19470

FLN 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Printed in U.S.A.

Description

Qty. Req.

Qty. Req.

Description

(AFTER SN5750–2340 & SN8150–2360) (BEFORE SN6001–2340 & SN8001–2360)

31

CB 5/16X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . 3

907146/AP1195

DC2340/2360 - DEFLECTOR ASSEMBLY

A

2 Do Not Overtighten.

6 7 14

13 8

1 5 A

3

13

8 7 12 20

NOTE: 1.ăItem 18 Should Pivot With Slight Resistance After Nuts Are Tightened.

2.ăAdjust Linkage (Items 9Ć11) To 5.50 Between Centers Of Ball In Item 9.

Ref. No.

Part No.

01

124153

02

650771

03 05 06

16

19

9 18

12

19

Ref. No.

Part No.

FLAP/DEFLECTOR . . . . . . . . . . . . . . . . . . 1

10

126462

ROD 3/8NFX3 . . . . . . . . . . . . . . . . . . . . . . . 1

CB 1/4X1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . 4

11

650552

HN 3/8 NF . . . . . . . . . . . . . . . . . . . . . . . . . . 1

654002

FW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

12

071703

LN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

071700

LN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

13

654051

FW 3/4 NARROW . . . . . . . . . . . . . . . . . . . . 2

124861

DEFLECTOR/ASSY (2340) . . . . . . . . . . . . 1

14

655020

CP 3/16X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

9 11 10

Description

Qty. Req.

125355

DEFLECTOR/ASSY (2360) . . . . . . . . . . . . 1

16

650569

CS 1/2X1-3/4 . . . . . . . . . . . . . . . . . . . . . . . . 1

07

650579

CS 3/8X1-3/4 . . . . . . . . . . . . . . . . . . . . . . . . 2

18

126460

HANDLE/ASSY . . . . . . . . . . . . . . . . . . . . . . 1

08

090085

SPACER/WHEEL . . . . . . . . . . . . . . . . . . . . 2

19

057557

WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

09

079039

ROD/END FEMALE THRD RT . . . . . . . . . 2

20

653044

NUT/HEX JAM 1/2 . . . . . . . . . . . . . . . . . . . 2

907146/AP1195

32

Printed in U.S.A.

DC2340/2360 - TRANSMISSION COVER & PLUG

23 31

20

3

BEFORE SN5651-2340 SN7651-2360 3 24 22 21

43

3

25

26

19 39

6

NOTE: DO NOT DEFORM ITEM 39 WHEN TIGHTENING

Ref. No.

Part No.

Ref. No.

Part No.

03

654002

06

071700

FW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

24

654022

LN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

19

25

653005

HN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

126442a

EDGING/HOOD . . . . . . . . . . . . . . . . . . . . . 1

26

420-34069

HOLE PLUG . . . . . . . . . . . . . . . . . . . . . . . . 1

20

126445

HOOD/ASSY . . . . . . . . . . . . . . . . . . . . . . . . 1

31

650758

CB 1/4X3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . 2

21

126447

SCREEN/HOOD . . . . . . . . . . . . . . . . . . . . . 1

22

079923

RIVET/BLIND . . . . . . . . . . . . . . . . . . . . . . . 7

39

118110

FLAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

23

650448

CS 1/4X3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . 2 43

650606

FW #8 WIDE . . . . . . . . . . . . . . . . . . . . . . . . 7

Description

Qty. Req.

LW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

(AFTER SN5650–2340 & SN7650–2360)

(AFTER SN6500–2340 & SN8549–2360) 650835

Qty. Req.

Description

CS 1/4X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

a) For replacement order 084255.

(BEFORE SN6500–2340 & SN8551–2360)

Printed in U.S.A.

33

907146/AP1195

DC2340/2360 - LIFT SPRING COVER 15 14 13

NOTE: Spring Latch (Item 17) Installation Is Typical Of ALL Doors.

6

18 17

16

17

18

Ref. No.

Part No.

06

071700

LN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

16

061308

GRIP/VINYL . . . . . . . . . . . . . . . . . . . . . . . . 1

13

309173

WASHER/FLAT . . . . . . . . . . . . . . . . . . . . . . 6

17

420-33620

SPRING LATCH . . . . . . . . . . . . . . . . . . . . . 6

14

125089

BUMPERS . . . . . . . . . . . . . . . . . . . . . . . . . . 2

18

983-01321

RIVET/POP . . . . . . . . . . . . . . . . . . . . . . . . 12

15

650946

THMS 1/4X1 . . . . . . . . . . . . . . . . . . . . . . . . 2

907146/AP1195

Description

Qty. Req.

Ref. No.

34

Part No.

Description

Qty. Req.

Printed in U.S.A.

DC2340/2360 - TRANSMISSION SHIELD

10 13

Nut Flush With End of Bolt (Item 2)

14

8 21

2 5 3

01

112412

126525a 02 03

650183 654002

19

4

Description

14

15 16

Qty. Req.

17

Ref. No.

Part No.

18

Qty. Req.

Description

SHIELD/ASSY CLUTCH (INCL 15–21) . . 1

14

650985

TFS 5/16x3/4 . . . . . . . . . . . . . . . . . . . . . . . . 3

(AFTER SN5360–2340 & SN7300–2360)

15

650550

HN #10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SHIELD/CLUTCH . . . . . . . . . . . . . . . . . . . . 1

16

650549

LW #10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

(BEFORE SN5361–2340 & SN7301–2360)

17

040860

CLIP/LUDWIG . . . . . . . . . . . . . . . . . . . . . . . 2

18

650980

RHMS 10–24X3/8 . . . . . . . . . . . . . . . . . . . . 2

19

126342

FLAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

20

650584

FW #10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

21

079187

RIVET/BLIND . . . . . . . . . . . . . . . . . . . . . . . 2

22

117929

ANGLE/ASSY . . . . . . . . . . . . . . . . . . . . . . . 1

SCREW/FHMS 1/4X1 . . . . . . . . . . . . . . . . . 2 FW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

04

124950a

CAP/SHIELD ASSY . . . . . . . . . . . . . . . . . . 2

05

U10023

SPRING/THROWOUT . . . . . . . . . . . . . . . . 2

06

071700

LN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

08

656110

WASHER/LOCK M8 . . . . . . . . . . . . . . . . . . 4

09

656001

CS M8-1.25X20 GR8.8 . . . . . . . . . . . . . . . . 4

10

049038

LATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

13

126437

DISC/ASSY . . . . . . . . . . . . . . . . . . . . . . . . . 1

Printed in U.S.A.

22

1

BEFORE SN5361-2340 & SN7301-2360

Part No.

24

20

6

1

Ref. No.

23

9

(AFTER SN5650–2340 & SN7650–2360) 23

004640

HANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

24

655006

CP 1/8X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

(AFTER SN5360–5650 & SN7650–2360) a) For replacement order 112412.

35

907146/AP1195

DC2340/2360 - LEFT DOOR ASSEMBLY

2 Hold these surfaces flush to inside of Door.

7

1 11 10

5

4

9

2

3

6 8

Ref. No.

Part No.

01

126333

02

650687

03

650810

FW 5/16 NARROW . . . . . . . . . . . . . . . . . . . 4

04

654024

LW 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

05

653007

06

126346

907146/AP1195

Ref. No.

Part No.

SHIELD/DUST . . . . . . . . . . . . . . . . . . . . . . . 1

07

126347

DOOR/ASSY LT . . . . . . . . . . . . . . . . . . . . . 1

CB 5/16X34 . . . . . . . . . . . . . . . . . . . . . . . . . 4

08

650758

CB 1/4X3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . 4

09

654002

FW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

HN 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

10

654022

LW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

SHIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

11

653005

HN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description

Qty. Req.

36

Description

Qty. Req.

Printed in U.S.A.

DC2340/2360 - RIGHT DOOR ASSEMBLIES

21

15

13

20

14

19

10

17

22 17

18

12 17

18

16 17 NOTE: Apply Silcone Sealer to obtain an oilĆtight seal.

Ref. No.

Part No.

12

126123

13

650704

14

654026

LW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

15

653010

HN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

16

126109

17

Printed in U.S.A.

Ref. No.

Part No.

COVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

18

650985

TFS 5/16X3/4 . . . . . . . . . . . . . . . . . . . . . . . 17

CB 3/8X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

19

126110

COVER/TOP . . . . . . . . . . . . . . . . . . . . . . . . 1

20

126298

SEAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

COVER/BOTTOM ASSY . . . . . . . . . . . . . . 1

21

660005

PLUG/PIPE 3/4 SQ HD . . . . . . . . . . . . . . . 1

SEALANT/SILICONE (CLEAR)

22

654006

FW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Description

Qty. Req.

37

Description

Qty. Req.

907146/AP1195

DC2340 - DEBRIS SKIRTS

31

31

6 3

31

Skirt

3 For fronts of Side Skirts

Typ. Installation For Side Of Side Skirts.

6

Skirt

3

6 For fronts of Front Skirts

28

28

29

NOTE: Bend Ends Of Straps 28 & 33 To Stop Deformation Of Cover When Torquing Hardware

33

27 28

3 32

3

35

34

Ref. No.

Part No.

03

654002

06

071700

25

653005

HN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

27

126432

SKIRT/RT . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

28

126281

29

126331

907146/AP1195

Ref. No.

Part No.

FW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

31

650758

CB 1/4X3/4 . . . . . . . . . . . . . . . . . . . . . . . . . 33

LN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

32

126283

SKIRT/FRONT . . . . . . . . . . . . . . . . . . . . . . 1

33

126280

STRAP/FRONT . . . . . . . . . . . . . . . . . . . . . . 1

STRAP/FRONT . . . . . . . . . . . . . . . . . . . . . . 3

34

126332

STRAP/FRONT . . . . . . . . . . . . . . . . . . . . . . 1

STRAP/FRONT . . . . . . . . . . . . . . . . . . . . . . 1

35

126433

SKIRT/LT . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

38

Description

Qty. Req.

Printed in U.S.A.

DC2360 - DEBRIS SKIRTS

31

31

6 3

31

6

3

Skirt

For fronts of Side Skirts

Typ. Installation For Side Of Side Skirts.

Skirt

3 6 For fronts of Front Skirts

28

28 29

NOTE: Bend Ends Of Straps 28 & 33 To Stop Deformation Of Cover When Torquing Hardware

33

27

28 32

35

34

Ref. No.

Part No.

03

654002

06

071700

25

653005

HN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

27

126432

SKIRT/RT . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

28

126281

29

126331

Printed in U.S.A.

Ref. No.

Part No.

FW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

31

650758

CB 1/4X3/4 . . . . . . . . . . . . . . . . . . . . . . . . . 34

LN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

32

126284

SKIRT/FRONT . . . . . . . . . . . . . . . . . . . . . . 1

33

126282

STRAP/FRONT . . . . . . . . . . . . . . . . . . . . . . 1

STRAP/FRONT . . . . . . . . . . . . . . . . . . . . . . 3

34

126332

STRAP/FRONT . . . . . . . . . . . . . . . . . . . . . . 1

STRAP/FRONT . . . . . . . . . . . . . . . . . . . . . . 1

35

126433

SKIRT/LT . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

39

Description

Qty. Req.

907146/AP1195

DC2340 - CENTER COVER NOTE: Apply Silicone Sealant to Ribs on underside of Item 1 and place Item 3 in position on Item 1. Insert Hinge between Items 1 and 3.

Install several bolts in the front and rear slots and secure to prepare for installation of Item 5. When Item 3 has been secured to Item 1 with Item 5, remove hardware that was used in front and rear slots for assembly alignment.

12 14 11 6 7 13 15 2 4 1

9

8 10

22 21

16 19

17 3

Ref. No.

Part No.

01

126260

02

126272

03

126267

04

5

18

20

Ref. No.

Part No.

COVER/ASSY . . . . . . . . . . . . . . . . . . . . . . . 1

13

650810

FW 5/16 NARROW . . . . . . . . . . . . . . . . . . . 1

HINGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

14

654024

LW 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

COVER/BOTTOM . . . . . . . . . . . . . . . . . . . . 1

15

653007

HN 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

SEALANT/SILICONE (CLEAR)

16

126285

BRACKET/COVER . . . . . . . . . . . . . . . . . . . 2

17

650773

CB 3/8X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 4

18

654006

FW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

19

654026

LW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description

Qty. Req.

23

05

052048

FASTENER/SELF DRILLING . . . . . . . . . . 11

06

126321

COVER/REAR . . . . . . . . . . . . . . . . . . . . . . 1

07

650758

CB 1/4X3/4 . . . . . . . . . . . . . . . . . . . . . . . . . 39

Description

Qty. Req.

08

654002

FW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

09

654022

LW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

20

653010

HN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

10

653005

HN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

21

125089

BUMPERS . . . . . . . . . . . . . . . . . . . . . . . . . . 2

11

126299

ANGLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

22

650426

CS 1/4X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . . 2

12

650573

CB 5/16X1 . . . . . . . . . . . . . . . . . . . . . . . . . . 1

23

071700

LN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

907146/AP1195

40

Printed in U.S.A.

DC2360 - CENTER COVER NOTE: Apply Silicone Sealant to Ribs on underside of Item 1 and place Item 3 in position on Item 1. Insert Hinge between Items 1 and 3.

Install several bolts in the front and rear slots and secure to prepare for installation of Item 5. When Item 3 has been secured to Item 1 with Item 5, remove hardware that was used in front and rear slots for assembly alignment.

12 14 11 6 7 13 15 2 41

9

8 10

22 21

17

3

Ref. No.

Part No.

01

126268

02

126273

03

126271

04

5

18

20

Ref. No.

Part No.

COVER/ASSY . . . . . . . . . . . . . . . . . . . . . . . 1

13

650810

FW 5/16 NARROW . . . . . . . . . . . . . . . . . . . 1

HINGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

14

654024

LW 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

COVER/BOTTOM . . . . . . . . . . . . . . . . . . . . 1

15

653007

HN 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

SEALANT/SILICONE (CLEAR)

16

126285

BRACKET/COVER . . . . . . . . . . . . . . . . . . . 2

17

650773

CB 3/8X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 4

18

654006

FW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

19

654026

LW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

653010

HN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description

Qty. Req.

23

16 19

05

052048

FASTENER/SELF DRILLING . . . . . . . . . 13

06

126431

COVER/REAR . . . . . . . . . . . . . . . . . . . . . . 1

07

650758

CB 1/4X3/4 . . . . . . . . . . . . . . . . . . . . . . . . . 47

08

654002

FW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Description

Qty. Req.

09

654022

LW 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

20

10

653005

HN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

21

125089

BUMPERS . . . . . . . . . . . . . . . . . . . . . . . . . . 2

11

126299

ANGLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

22

650426

CS 1/4X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . . 2

12

650573

CB 5/16X1 . . . . . . . . . . . . . . . . . . . . . . . . . . 1

23

071700

LN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Printed in U.S.A.

41

907146/AP1195

DC2340/2360 - DRIVELINE, TRACTOR TO TOWER (540 RPM) (AFTER SN5650-2340 & SN7672-2360)

1

7

Tractor End

5 6 14

4

14

2

13

2

12 Tower End

11 4 7 8

3

Ref. No.

Part No.

01

118118

02

078979

03 04

10

9

Ref. No.

Part No.

JT & SHAFT HALF ASM . . . . . . . . . . . . . . 1

08

118119

JT & TUBE HALF ASM . . . . . . . . . . . . . . . 1

KIT/CENTER CROSS . . . . . . . . . . . . . . . . 2

09

118121

GUARD/INNER . . . . . . . . . . . . . . . . . . . . . . 1

083429

YOKE/1.38-6 SLIDE . . . . . . . . . . . . . . . . . . 1

10

118226

CENTRALIZER . . . . . . . . . . . . . . . . . . . . . . 1

095166

KIT/SLIDE LOCK . . . . . . . . . . . . . . . . . . . . 2

11

118122

YOKE & TUBE ASSY . . . . . . . . . . . . . . . . . 1

05

125774

YOKE & SHAFT . . . . . . . . . . . . . . . . . . . . . 1

12

125778

YOKE/SLIDE LOCK ASM . . . . . . . . . . . . . 1

06

118120

GUARD/OUTER . . . . . . . . . . . . . . . . . . . . . 1

13

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

07

095129

KIT/REPAIR . . . . . . . . . . . . . . . . . . . . . . . . . 2

14

570004

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 2

907146/AP1195

Description

Qty. Req.

42

Description

Qty. Req.

Printed in U.S.A.

DC2340/2360 - DRIVELINE, TRACTOR TO TOWER (540 RPM) (BEFORE SN5651-2340 & SN7673-2360)

1

12

7 5

11 12 14 13

Part No.

01

125494

02

083429

03

3 17 9

2 18 19

Ref. No.

10

16

3

Tower End

11

4

17

Tractor End

6

13

14

6

5 15

8

Ref. No.

Part No.

JT & SHAFT HALf ASM . . . . . . . . . . . . . . . 1

11

510229

PAWL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

YOKE/1.38-6 SLIDE . . . . . . . . . . . . . . . . . . 1

12

510228

SPRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

078979

KIT/CENTER CROSS . . . . . . . . . . . . . . . . 2

13

510226

RING/RETAINING . . . . . . . . . . . . . . . . . . . 2

04

125774

YOKE & SHAFT . . . . . . . . . . . . . . . . . . . . . 1

14

510227

COLLAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

05

047524

RETAINER/BEARING . . . . . . . . . . . . . . . . 2

06

047523

BEARING/SHIELD . . . . . . . . . . . . . . . . . . . 2

15

125495

JT & TUBE HALF ASM . . . . . . . . . . . . . . . 1

07

125775

GUARD/OUTER . . . . . . . . . . . . . . . . . . . . . 1

16

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

08

125776

GUARD/INNER . . . . . . . . . . . . . . . . . . . . . . 1

17

570004

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 2

09

125777

YOKE, TUBE & SLEEVE . . . . . . . . . . . . . . 1

18

126755

CENTRALIZER . . . . . . . . . . . . . . . . . . . . . . 1

10

125778

YOKE/SIDE LOCK ASM . . . . . . . . . . . . . . 1

19

126756

EXTENSION/BELL . . . . . . . . . . . . . . . . . . . 1

Printed in U.S.A.

Description

Qty. Req.

43

Description

Qty. Req.

907146/AP1195

DC2340/2360 - DRIVELINE, TOWER TO GEARBOX (540 RPM) (AFTER SN5650-2340 & SN7672-2360)

1

Gearbox End

6 Tower End

5

16

16

4

11 15

9

3

6

3 2 8

12 7 10 14 13

Ref. No.

Part No.

Ref. No.

Part No.

01

118128

02

125788

JT & SHAFT HALF ASM . . . . . . . . . . . . . . 1

10

118129

YOKE/DOUBLE CLAMP . . . . . . . . . . . . . . 1

03

11

115433a

CLUTCH/ASSY (540 RPM) . . . . . . . . . . . . 1

078979

KIT/CENTER CROSS . . . . . . . . . . . . . . . . 2

12

118132

YOKE & TUBE ASSY . . . . . . . . . . . . . . . . . 2

04

125789

YOKE & SHAFT ASSY . . . . . . . . . . . . . . . . 1

13

118131

GUARD/INNER . . . . . . . . . . . . . . . . . . . . . . 2

05

118130

GUARD/OUTER . . . . . . . . . . . . . . . . . . . . . 1

14

118226

CENTRALIZER . . . . . . . . . . . . . . . . . . . . . . 2

06

095129

KIT/REPAIR . . . . . . . . . . . . . . . . . . . . . . . . . 2

15

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

07

651240

CS 1/2X3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

16

570004

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 2

08

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

09

653018

HN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

907146/AP1195

Description

Qty. Req.

Description

Qty. Req.

JT & TUBE HALF ASM . . . . . . . . . . . . . . . 1

a) For Parts Breakdown, see page titled Overrunning Clutch (540 RPM).

44

Printed in U.S.A.

DC2340/2360 - DRIVELINE, TOWER TO GEARBOX (540 RPM) (BEFORE SN5651-2340 & SN7673-2360)

1

17

Gearbox End

7

6

5 4

Tower End

10 3

15

3

14

9 2

13 6 16

Ref. No.

Part No.

01

125492

02

125788

03

5 11

8

Ref. No.

Part No.

JT & SHAFT HALF ASM . . . . . . . . . . . . . . 1

10

115433a

CLUTCH/ASSY (540 RPM) . . . . . . . . . . . . 1

YOKE/DOUBLE CLAMP . . . . . . . . . . . . . . 1

11

125493

JT & TUBE HALF ASM . . . . . . . . . . . . . . . 1

078979

KIT/CENTER CROSS . . . . . . . . . . . . . . . . 2

13

651240

CS 1/2X3 GR8 . . . . . . . . . . . . . . . . . . . . . . . 2

04

125789

YOKE & SHAFT ASSY . . . . . . . . . . . . . . . . 1

14

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

05

047524

RETAINER/BEARING . . . . . . . . . . . . . . . . 2

15

653018

HN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

06

047523

BEARING/SHIELD . . . . . . . . . . . . . . . . . . . 2

16

126755

CENTRALIZER . . . . . . . . . . . . . . . . . . . . . . 1

07

125790

GUARD/OUTER . . . . . . . . . . . . . . . . . . . . . 1

17

126756

EXTENSION/BELL . . . . . . . . . . . . . . . . . . . 1

08

125791

GUARD/INNER . . . . . . . . . . . . . . . . . . . . . . 1

09

125792

YOKE, TUBE & SLEEVE . . . . . . . . . . . . . . 1

Printed in U.S.A.

Description

Qty. Req.

Description

Qty. Req.

a) For Parts Breakdown, see page titled Overrunning Clutch (540 RPM).

45

907146/AP1195

DC2340/2360 - DRIVELINE, TRACTOR TO TOWER (1000 RPM) (AFTER SN5650-2340 & SN7672-2360)

1

7

Tractor End

5 6 14

4

14 2

13

2

12 Tower End

11 4 7 8

3

Ref. No.

Part No.

01

118123

02

078979

03 04

10

9

Ref. No.

Part No.

JT & SHAFT HALF ASM . . . . . . . . . . . . . . 1

08

118124

JT & TUBE HALF ASM . . . . . . . . . . . . . . . 1

KIT/CENTER CROSS . . . . . . . . . . . . . . . . 2

09

118126

GUARD/INNER . . . . . . . . . . . . . . . . . . . . . . 1

079000

YOKE/SLIDE LOCK ASSY . . . . . . . . . . . . 1

10

118226

CENTRALIZER . . . . . . . . . . . . . . . . . . . . . . 1

095166

KIT/SLIDE LOCK . . . . . . . . . . . . . . . . . . . . 2

11

118127

YOKE & TUBE ASSY . . . . . . . . . . . . . . . . . 1

05

125784

YOKE W/SHAFT . . . . . . . . . . . . . . . . . . . . . 1

12

125778

YOKE/SLIDE LOCK ASM . . . . . . . . . . . . . 1

06

118125

GUARD/OUTER . . . . . . . . . . . . . . . . . . . . . 1

13

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

07

095129

KIT/REPAIR . . . . . . . . . . . . . . . . . . . . . . . . . 2

14

570004

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 2

907146/AP1195

Description

Qty. Req.

46

Description

Qty. Req.

Printed in U.S.A.

DC2340/2360 - DRIVELINE, TRACTOR TO TOWER (1000 RPM) (BEFORE SN5651-2340 & SN7673-2360)

1

12

7 5

11 12 14 13

Part No.

01

125496

02

079000

03

3 17 9

2 18 19

Ref. No.

10

16

3

Tower End

11

4

17

Tractor End

6

13

14

6

5 15

8

Ref. No.

Part No.

JT & SHAFT HALF ASM . . . . . . . . . . . . . . 1

11

510229

PAWL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

YOKE/SLIDE LOCK ASSY . . . . . . . . . . . . 1

12

510228

SPRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

078979

KIT/CENTER CROSS . . . . . . . . . . . . . . . . 2

13

510226

RING/RETAINING . . . . . . . . . . . . . . . . . . . 2

04

125784

YOKE W/SHAFT . . . . . . . . . . . . . . . . . . . . . 1

14

510227

COLLAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

05

047524

RETAINER/BEARING . . . . . . . . . . . . . . . . 2

06

047523

BEARING/SHIELD . . . . . . . . . . . . . . . . . . . 2

15

125497

JT & TUBE HALF ASM . . . . . . . . . . . . . . . 1

16

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

Description

Qty. Req.

07

125785

GUARD/OUTER . . . . . . . . . . . . . . . . . . . . . 1

08

125786

GUARD/INNER . . . . . . . . . . . . . . . . . . . . . . 1

17

570004

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 2

09

125787

YOKE, TUBE & SLEEVE . . . . . . . . . . . . . . 1

18

126755

CENTRALIZER . . . . . . . . . . . . . . . . . . . . . . 1

10

125778

YOKE/SIDE LOCK ASM . . . . . . . . . . . . . . 1

19

126756

EXTENSION/BELL . . . . . . . . . . . . . . . . . . . 1

Printed in U.S.A.

47

907146/AP1195

DC2340/2360 - DRIVELINE, TOWER TO GEARBOX (1000 RPM) (AFTER SN5650-2340 & SN7672-2360)

1

Gearbox End

6 Tower End

5

16

16

4

11 15 3 9

3

6

2 8

12 7 10 14 13

Ref. No.

Part No.

Ref. No.

Part No.

01

118128

02

125788

JT & SHAFT HALF ASM . . . . . . . . . . . . . . 1

10

118133

YOKE/DOUBLE CLAMP . . . . . . . . . . . . . . 1

03

11

097588a

CLUTCH/ASSY (1000 RPM) . . . . . . . . . . . 1

078979

KIT/CENTER CROSS . . . . . . . . . . . . . . . . 2

12

118132

YOKE & TUBE ASSY . . . . . . . . . . . . . . . . . 2

04

125789

YOKE & SHAFT ASSY . . . . . . . . . . . . . . . . 1

13

118131

GUARD/INNER . . . . . . . . . . . . . . . . . . . . . . 2

05

118130

GUARD/OUTER . . . . . . . . . . . . . . . . . . . . . 1

14

118226

CENTRALIZER . . . . . . . . . . . . . . . . . . . . . . 2

06

095129

KIT/REPAIR . . . . . . . . . . . . . . . . . . . . . . . . . 2

15

570014

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

07

651240

CS 1/2X3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

16

570004

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 2

08

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

09

653018

HN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

907146/AP1195

Description

Qty. Req.

Description

Qty. Req.

JT & TUBE HALF ASM . . . . . . . . . . . . . . . 1

a) For Parts Breakdown, see page titled Overrunning Clutch (1000 RPM).

48

Printed in U.S.A.

DC2340/2360 - DRIVELINE, TOWER TO GEARBOX (1000 RPM) (BEFORE SN5651-2340 & SN7673-2360)

1

17

Gearbox End

7

6

5 4

Tower End

10 3

15

3

14

9 2 13 6 16

Ref. No.

Part No.

01

125492

02

125788

03

5 11

8

Ref. No.

Part No.

JT & SHAFT HALF ASM . . . . . . . . . . . . . . 1

10

097588a

CLUTCH/ASSY (1000 RPM) . . . . . . . . . . . 1

YOKE/DOUBLE CLAMP . . . . . . . . . . . . . . 1

11

125752

JT & TUBE HALF ASM . . . . . . . . . . . . . . . 1

078979

KIT/CENTER CROSS . . . . . . . . . . . . . . . . 2

13

651240

CS 1/2X3 GR8 . . . . . . . . . . . . . . . . . . . . . . . 2

04

125789

YOKE & SHAFT ASSY . . . . . . . . . . . . . . . . 1

14

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

05

047524

RETAINER/BEARING . . . . . . . . . . . . . . . . 2

15

653018

HN 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

06

047523

BEARING/SHIELD . . . . . . . . . . . . . . . . . . . 2

16

126755

CENTRALIZER . . . . . . . . . . . . . . . . . . . . . . 1

07

125790

GUARD/OUTER . . . . . . . . . . . . . . . . . . . . . 1

17

126756

EXTENSION/BELL . . . . . . . . . . . . . . . . . . . 1

08

125791

GUARD/INNER . . . . . . . . . . . . . . . . . . . . . . 1

09

125792

YOKE, TUBE & SLEEVE . . . . . . . . . . . . . . 1

Printed in U.S.A.

Description

Qty. Req.

Description

Qty. Req.

a) For Parts Breakdown, see page titled Overrunning Clutch (1000 RPM).

49

907146/AP1195

DC2340/2360 - OVERRUNNING CLUTCH (540 RPM)

12

6 11 10

13 18 16

15

5

4

17

21

3 1 20 19 2 14 9

NOTE: Set length of installed Springs to 1.97".

8 9 7 9 8 9

Ref. No.

Part No. 115433

Description

Qty. Req.

CLUTCH/ASSY (540 RPM) . . . . . . . . . . . . 1 CONSISTS OF:

Ref. No.

Part No.

13

125873

INNER DRIVE HUB & EXT . . . . . . . . . . . . 1

Description

Qty. Req.

14

055342

SPRING/CLUTCH . . . . . . . . . . . . . . . . . . . 9

01

650894

SHCS 5/16X1 . . . . . . . . . . . . . . . . . . . . . . . 6

15

055348

SCREW/SOCKET HEAD CAP . . . . . . . . . 1

02

125793

HOUSING/ASSY . . . . . . . . . . . . . . . . . . . . . 1

16

654026

LW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

03

125794

LOCK RING . . . . . . . . . . . . . . . . . . . . . . . . . 1

17

125874

BALL BEARING/STEEL 5/16 . . . . . . . . . 20

04

125795

YOKE & PLATE . . . . . . . . . . . . . . . . . . . . . . 1

18

570009

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 1

19

650379

CS 1/2x3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

20

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

22

127042

KIT/CLUTCH OVERrUNNING . . . . . . . . . . 1

23

127043

KIT/CLUTCH FRICTION . . . . . . . . . . . . . . 1

05 06

GREASE SEAL RING . . . . . . . . . . . . . . . . 1 125797

O’RUN CLUTCH OUTER HUB . . . . . . . . . 1

07

125798

PLATE-INNER ENGAGED . . . . . . . . . . . . 1

08

125799

PLATE-OUTER ENGAGED . . . . . . . . . . . . 2

09 10

21

FRICTION DISC . . . . . . . . . . . . . . . . . . . . . 4 055372

(INCL 5, 10-12, 15-18, 21)(NOT SHOWN)

SPRING/LEAF . . . . . . . . . . . . . . . . . . . . . . . 2

11

055371

KEY/DRIVE . . . . . . . . . . . . . . . . . . . . . . . . . 2

12

125872

RETAINING RING . . . . . . . . . . . . . . . . . . . 1

907146/AP1195

O-RING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

(INCL 1, 9, 14)(NOT SHOWN)

50

Printed in U.S.A.

DC2340/2360 - OVERRUNNING CLUTCH (1000 RPM) 10

1 7

8

15

14

16

13

18 17

6

12 4

3 9

Ref. No.

Part No. 097588

10

2

5

NOTE: Set length of installed Springs to 2.06″.

11

5 4

Description

Qty. Req.

CLUTCH/ASSY (1000 RPM) . . . . . . . . . . 1 CONSISTS OF:

Ref. No.

Part No.

Qty. Req.

11

055344

SEAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

12

058623

PRESSURE PLATE . . . . . . . . . . . . . . . . . . 1

Description

01

125876

O’RUN YOKE & PLATE ASSY . . . . . . . . . 1

13

125884

SPRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

02

055347

PRESSURE PLATE & DR HUB . . . . . . . . 1

14

650742

CS 3/8X4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

03

125878

INNER DRIVE HUB . . . . . . . . . . . . . . . . . . 1

15

125885

WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 6

04

055371

KEY/DRIVE . . . . . . . . . . . . . . . . . . . . . . . . . 2

16

125886

NUT/OVALOK . . . . . . . . . . . . . . . . . . . . . . . 6

05

055372

SPRING/LEAF . . . . . . . . . . . . . . . . . . . . . . . 2

17

650379

CS 1/2x3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

06

570002

FITTING/GREASE . . . . . . . . . . . . . . . . . . . 2

18

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

07

055348

SCREW/SOCKET HEAD CAP . . . . . . . . . 1

19

127040

KIT/CLUTCH OVERrUNNING . . . . . . . . . . 1

08

654026

LW 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

09

125874

BALL BEARING/STEEL 5/16 . . . . . . . . . 14

20

127041

KIT/CLUTCH FRICTION . . . . . . . . . . . . . . 1

10

055343

DISC/FRICTION . . . . . . . . . . . . . . . . . . . . . 2

Printed in U.S.A.

(INCL 4-9, 11) (NOT SHOWN) (INCL 10, 13-16) (NOT SHOWN)

51

907146/AP1195

DC2340 - CUTTERBAR

24 25 29 30 31 27 28 6

4 20

5

8

1 3

24 25 29 30 26

19 27

21

28

11

14

22

10

12

11

11

11

9 12

10

18

9

11

10

10

9

10

15

16 17

2 13 5 7

9 12

23

907146/AP1195

52

Printed in U.S.A.

DC2340 - CUTTERBAR Ref. No.

Part No. 098196

Description

Qty. Req.

CUTTERBAR/7 DISC . . . . . . . . . . . . . . . . . 1 CONSISTS OF:

Ref. No.

Part No.

16

125437

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . 13

17

125438

BUSHING/NYLON . . . . . . . . . . . . . . . . . . 13

Description

Qty. Req.

01

125422

PLATE/WEAR . . . . . . . . . . . . . . . . . . . . . . . 6

18

125439

GEAR/IDLER . . . . . . . . . . . . . . . . . . . . . . . . 1

02

125423

PLATE/GEAR CASE BOTTOM . . . . . . . . . 1

19

125440

GEAR/IDLER . . . . . . . . . . . . . . . . . . . . . . . . 2

03

125424

O-RING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

20

125441

FLS M10-16 GR10.9 . . . . . . . . . . . . . . . . . 28

04

125425

PLATE/GEAR CASE TOP . . . . . . . . . . . . . 1

21

125442

FLS M10-18 GR10.9 . . . . . . . . . . . . . . . . . 21

05

125426

RING/SEALING . . . . . . . . . . . . . . . . . . . . . . 2

22

071032

FLS M10-20 GR10.9 . . . . . . . . . . . . . . . . . 15

06

125427

PLUG/MAGNETIC DRAIN . . . . . . . . . . . . . 1

07

125428

VALVE/RELIEF & OVERFLOW . . . . . . . . . 1

23

071043

FLN M10 . . . . . . . . . . . . . . . . . . . . . . . . . . 36

08

125429

PLATE/REAR WEAR . . . . . . . . . . . . . . . . . 3

09

125430

GEAR/PINION . . . . . . . . . . . . . . . . . . . . . . . 4

10

125431

GEAR/IDLER . . . . . . . . . . . . . . . . . . . . . . . . 5

24

125450

NUT/SELF-LOCKING . . . . . . . . . . . . . . . . . 7

25

125451

WASHER/CONICAL SPRING . . . . . . . . . . 7

26

125452

HOUSING/DISC BEARING . . . . . . . . . . . . 6

125453

O-RING . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

11

125432

GEAR/IDLER . . . . . . . . . . . . . . . . . . . . . . . . 5

27

12

125433

GEAR/PINION . . . . . . . . . . . . . . . . . . . . . . . 3

28

125454

O-RING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

125455

RING/RETAINING . . . . . . . . . . . . . . . . . . . 7

13

125434

SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . 13

29

14

125435

SCREW/SPECIAL . . . . . . . . . . . . . . . . . . 13

30

125456

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

15

125436

RING/RETAINING . . . . . . . . . . . . . . . . . . 26

31

125457

HOUSING/DISC BEARING . . . . . . . . . . . . 1

Printed in U.S.A.

53

907146/AP1195

DC2360 - CUTTERBAR

6

4

5

1 3

8 22 23 27 28 24 19

11 10 25 26

10 11

18 10 11

11

14

20

11

10

9

11 12

10 9

11 12

10

9 12

10

15

16 17

13

5 7

9 12 2

21

907146/AP1195

54

Printed in U.S.A.

DC2360 - CUTTERBAR Ref. No.

Part No. 098197

Description

Qty. Req.

CUTTERBAR/8 DISC . . . . . . . . . . . . . . . . . 1 CONSISTS OF:

Ref. No.

Part No.

14

125435

SCREW/SPECIAL . . . . . . . . . . . . . . . . . . 14

15

125436

RING/RETAINING . . . . . . . . . . . . . . . . . . 28

Description

Qty. Req.

01

125422

PLATE/WEAR . . . . . . . . . . . . . . . . . . . . . . . 7

16

125437

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . 14

02

125458

PLATE/GEARCASE BOTTOM . . . . . . . . . 1

17

125438

BUSHING/NYLON . . . . . . . . . . . . . . . . . . 14

03

125459

O-RING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

18

125441

FLS M10-16 GR10.9 . . . . . . . . . . . . . . . . . 32

04

125460

PLATE/GEARCASE TOP . . . . . . . . . . . . . . 1

19

125442

FLS M10-18 GR10.9 . . . . . . . . . . . . . . . . . 24

05

125426

RING/SEALING . . . . . . . . . . . . . . . . . . . . . . 2

20

071032

FLS M10-20 GR10.9 . . . . . . . . . . . . . . . . . 17

06

125427

PLUG/MAGNETIC DRAIN . . . . . . . . . . . . . 1

21

071043

FLN M10 . . . . . . . . . . . . . . . . . . . . . . . . . . 41

07

125428

VALVE/RELIEF & OVERFLOW . . . . . . . . . 1

22

125450

NUT/SELF-LOCKING . . . . . . . . . . . . . . . . . 8

08

125429

PLATE/REAR WEAR . . . . . . . . . . . . . . . . . 3

23

125451

WASHER/CONICAL SPRING . . . . . . . . . . 8

09

125430

GEAR/PINION . . . . . . . . . . . . . . . . . . . . . . . 4

24

125452

HOUSING/DISC BEARING . . . . . . . . . . . . 8

10

125431

GEAR/IDLER . . . . . . . . . . . . . . . . . . . . . . . . 7

25

125453

O-RING . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

11

125432

GEAR/IDLER . . . . . . . . . . . . . . . . . . . . . . . . 7

26

125454

O-RING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

12

125433

GEAR/PINION . . . . . . . . . . . . . . . . . . . . . . . 4

27

125455

RING/RETAINING . . . . . . . . . . . . . . . . . . . 8

13

125434

SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . 14

28

125456

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Printed in U.S.A.

55

907146/AP1195

DC2340/2360 - GEARBOX

907146/AP1195

56

Printed in U.S.A.

DC2340/2360 - GEARBOX Ref. No.

Part No. 097528a

Description

Qty. Req.

GEARBOX/540 RPM . . . . . . . . . . . . . . . . . 1

Ref. No.

Part No.

19

126636

GEAR 17t (540 RPM) (SHOWN) . . . . . . . . 1

126645

GEAR 23t (1000 RPM) (NOT SHOWN) . . 1

Description

Qty. Req.

097529a

GEARBOX/1000 RPM . . . . . . . . . . . . . . . . 1 20

126646

CAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

01

126628

CASING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

21

126647

SHAFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

02

126629

GEAR/SHAFT ASSY . . . . . . . . . . . . . . . . . 1

22

126648

OIL SEAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

03

126630

KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

23

126649

PLUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

04

126631

GEAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

24

126650

SHAFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

05

126632

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

25

126651

SNAP RING . . . . . . . . . . . . . . . . . . . . . . . . . 1

07

126634

NUT/M30X1.5 . . . . . . . . . . . . . . . . . . . . . . . 1

08

126635

COTTER PIN . . . . . . . . . . . . . . . . . . . . . . . . 1

09

126645

GEAR 23t (540 RPM) (SHOWN) . . . . . . . . 1

126636

GEAR 17t (1000 RPM) (NOT SHOWN) . . 1

10

126637

SHIM KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

11

126638

COVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

CONSISTS OF:

12

126639

DIPSTICK . . . . . . . . . . . . . . . . . . . . . . . . . . 1

13

126640

SNAP RING . . . . . . . . . . . . . . . . . . . . . . . . . 2

26

126652

OIL SEAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

27

126653

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

28

126654

SNAP RING . . . . . . . . . . . . . . . . . . . . . . . . . 3

29

126655

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

30

126656

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

31

126657

SHAFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

32

126658

OIL SEAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

126659

BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

14

126641

SHIM KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

33

15

089139

PLUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

34

126660

EXTENSION . . . . . . . . . . . . . . . . . . . . . . . . 1

656132

CS M10-1.50X22 GR8.8 . . . . . . . . . . . . . . 16

126661

SHIM KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

16

126642

SHIM KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

35

17

126643

SNAP RING . . . . . . . . . . . . . . . . . . . . . . . . . 1

36

18

126644

SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Printed in U.S.A.

a) Gearbox does NOT include Dipstick.

57

907146/AP1195

DC2340/2360 - AXLES & WHEELS

15

1 16

10

8

5

2 9 17

10

11

3

12 14 13 4

6 7

Ref. No.

Part No.

Ref. No.

Part No.

01

124777 124776

LEG/ASSY LT (SHOWN) . . . . . . . . . . . . . . 1

09

076586

LEG/ASSY RT (NOT SHOWN) . . . . . . . . . 1

10

02 03

079716

SEAL/GREASE . . . . . . . . . . . . . . . . . . . . . . 2

11

042162

CUP/WHEEL BEARING . . . . . . . . . . . . . . . 2

042163

CONE/WHEEL BEARING . . . . . . . . . . . . . 2

12

046000

BOLT/WHEEL . . . . . . . . . . . . . . . . . . . . . . 12

04

130543

HUB/WHEEL ASSEMBLY . . . . . . . . . . . . . 2

13

046001

NUT/WHEEL . . . . . . . . . . . . . . . . . . . . . . . 12

05

520201

CONE/BEARING . . . . . . . . . . . . . . . . . . . . 2

14

520054

CUP/BEARING . . . . . . . . . . . . . . . . . . . . . . 2

06

066717

FW 31/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

15

126739

WHEEL/RIM (14 X 8KB DC) . . . . . . . . . . . 2

07

653102

SN 7/8NF . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

16

045582

VALVE/TIRE . . . . . . . . . . . . . . . . . . . . . . . . 2

08

655010

CP 1/8X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 2

17

082621

SPINDLE (WELDED IN) . . . . . . . . . . . . . . 2

907146/AP1195

Description

Qty. Req.

58

Description

Qty. Req.

CAP/GREASE . . . . . . . . . . . . . . . . . . . . . . . 2 GREASE/GUN 242 LITHIUM

Printed in U.S.A.

DC2340/2360 - HITCHJACK & TRANSPORT LIGHTS 5 7

4(8)

2

5(8) 6(8)

6 7(8)

6 3

8

4

3

1

8(2)

4 2 Early Style

1

Ref. No.

Part No. 088841

Description

10

Qty. Req.

Ref. No.

HITCHJACK - WESBAR . . . . . . . . . . . . . . 1

Part No. 806188

CONSISTS OF:

9

Description

Qty. Req.

LIGHTS/DC MC TRANSPORT . . . . . . . . . 1 CONSISTS OF:

01

061276

PIN & CHAIN . . . . . . . . . . . . . . . . . . . . . . . . 1

01

112884

LIGHT/TRANSPORT LT . . . . . . . . . . . . . . . 1

02

081462

TUBE/INNER ASSY . . . . . . . . . . . . . . . . . . 1

02

112885

LIGHT/TRANSPORT RT . . . . . . . . . . . . . . 1

03

092021

TUBE/OUTER . . . . . . . . . . . . . . . . . . . . . . . 1

03

112886

HOLDER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

04

126735

HANDLE (LATER STYLE) . . . . . . . . . . . . . 1

04

125946

BASE/MOUNTING . . . . . . . . . . . . . . . . . . . 8

081463a

HANDLE & NUT (EARLY STYLE) . . . . . . 1

05

055648

TIE/WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

05

077838

CAP/TOP . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

06

650426

CS 1/4X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . . 8

06

094283

KIT/INTERNAL PARTS . . . . . . . . . . . . . . . 1

07

071401

NILN 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

07

077836

KIT/GEAR . . . . . . . . . . . . . . . . . . . . . . . . . . 1

08

112706

SUPPORT/LIGHT . . . . . . . . . . . . . . . . . . . . 2

08

077839a

SHAFT/CROSS . . . . . . . . . . . . . . . . . . . . . . 1

09

112893

HARNESS/“Y” . . . . . . . . . . . . . . . . . . . . . . . 1

10

112898

HARNESS/PRIMARY . . . . . . . . . . . . . . . . . 1

a) Replaced by 126735 later style Handle.

Printed in U.S.A.

59

907146/AP1195

DC2340/2360 - HITCH EXTENSION (AFTER SN6100-2340 & SN8150-2360)

6

7

5

1

9

2

11

3 12

4 Torque Nut Item 4 To

13

550-650 Foot-Pounds

14

10

15

8

Ref. No.

Part No. 119401

Description

Qty. Req.

KIT/HITCH EXTENSION . . . . . . . . . . . . . . 1 CONSISTS OF:

Ref. No.

Part No.

10

650857

HN 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

11

654030

LW 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

01

119230

HITCH ASSY (INCL 2-4) . . . . . . . . . . . . . . 1

12

655016

CP 3/16X1 . . . . . . . . . . . . . . . . . . . . . . . . . . 1

02

220-32253

PIN/LINK ASSY (INCL 3-4) . . . . . . . . . . . . 1

13

113055

SPACER/1-1/4 OD . . . . . . . . . . . . . . . . . . . 1 SPACER/1-3/8 OD . . . . . . . . . . . . . . . . . . . 1 SPACER/1-1/2 OD . . . . . . . . . . . . . . . . . . . 1

03

650459

HN 1-1/8 (TORQUE 600 FT LB) . . . . . . . . 1

113056

04

651242

WASHER/LOCK 1-1/8 . . . . . . . . . . . . . . . . 1

113057

PIN ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . 1

113058

SPACER/1-5/8 OD . . . . . . . . . . . . . . . . . . . 1

14

119500

CARD/HITCH INSTRUCTION . . . . . . . . . . 1

15

118802

BOX/PLASTIC . . . . . . . . . . . . . . . . . . . . . . . 1

05

119269

06

119805

LINCHPIN W/CHAIN . . . . . . . . . . . . . . . . . 1

07

126116

SHIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

08

650163

CS 3/4X1-3/4 . . . . . . . . . . . . . . . . . . . . . . . . 4

09

650585

CS 1/2X2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

907146/AP1195

a) The complete Hitch Extension Kit is used for units BEFORE SN6101-2340 & SN8151-2360.

60

Printed in U.S.A.

DC2340/2360 - SAFETY TOW CHAIN 5

6

803099 Safety Tow Chain 15 Ton

7 10

1

8 9

2

3 4

Ref. No.

Part No. 803099

Description

Qty. Req.

CHAIN/SAFETY TOW 15 TON . . . . . . . . . 1 CONSISTS OF:

Ref. No.

Part No.

05

653026

HN 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

06

654034

LW 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Description

Qty. Req.

01

650695

CS 5/8X3-1/2 . . . . . . . . . . . . . . . . . . . . . . . . 1

07

654014

FW 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

02

080894

CLEVIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

08

069076

FW 25/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

03

654032

LW 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

09

651073

CS 3/4X3-1/4 . . . . . . . . . . . . . . . . . . . . . . . . 1

04

653021

HN 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

10

043912

FW 1-1/32 . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Printed in U.S.A.

61

907146/AP1195

Index A Axles & Wheels, 58

C Conditioner Left, 18–19 Right, 20 Cover Center, 40–41 Lift Spring, 34 Cutterbar, 52–55 Discs, 10–13 Drive, 8–9 Skid Shoes, 22–23

D Decal Locations, 2–5 Deflector, 32 Doors Left Assembly, 36 Right Assembly, 37 Drawbar, 6 Drawbar Positioner Hydraulics, 28

907146/AP1195

Driveline Tower to Gearbox (540 RPM), 44–45 Tractor to Gearbox (1000 RPM), 48–49 Tractor to Tower (1000 RPM), 46–47 Tractor to Tower (540 RPM), 42–43

O Overrunning Clutch, 50–51

R Roll Tension System, 21 Rollers & Lower Bearings, 14–15

S Safety Chain, 61 Skirts, Debris, 39–40

F Forming Chamber, 30–31

G Gearbox, 56–57 Drive, 8–9

H Hitch & Hitchjack, 7 Hitch Extension, 60 Hitchjack, 59

L Lift Hydraulics, 26–27

62

T Top Roller Arm Left, 16 Right, 17 Tower, 7 Shields, 6 Trailer Assembly Left, 26–27 Right, 24–25 Transmission Cover & Plug, 33 Shield, 35 Transport Lights, 59

Printed in U.S.A.

Notes

Printed in U.S.A.

63

907146/AP1195

DC2340/2360 - NUMERICAL INDEX Part No.

H6208 B11433A H6208 U10023 004640 040860 040860 042162 042163 043912 044090 045582 046000 046001 047269 047523 047523 047523 047523 047524 047524 047524 047524 049038 051905 052048 052048 055142 055342 055343 055344 055347 055348 055348 055371 055371 055372 055372 055447 055648 056336 056640 057557 057557 057557 057557 058623 059450 907146/AP1195

Page No.

Ref. No.

09 07 09 35 35 06 35 58 58 61 19 58 58 58 27 43 45 47 49 43 45 47 49 35 17 40 41 19 50 51 51 51 50 51 50 51 50 51 17 59 07 19 19 20 29 32 51 17

05 39 05 05 23 17 17 11 03 10 15 16 12 13 48 06 06 06 06 05 05 05 05 10 30 05 05 18 14 10 11 02 15 07 11 04 10 05 27 05 09 16 34 18 09 19 12 18

Part No.

059453 061276 061308 062335 062335 064331 064331 065054 065756 066717 066895 066895 068938 069076 069226 070643 070643 070856 071032 071032 071043 071043 071187 071187 071248 071401 071700 071700 071700 071700 071700 071700 071700 071700 071701 071701 071701 071701 071703 071703 071703 071703 071703 071703 071703 071705 071705 071706

Page No.

Ref. No.

07 59 34 22 23 19 20 09 17 58 19 20 28 61 19 16 17 27 53 55 53 55 22 23 09 59 32 33 34 35 38 39 40 41 07 09 25 27 06 21 22 23 25 27 32 22 23 22

06 01 16 16 16 10 10 23 24 06 32 16 13 08 26 13 13 35 22 20 23 21 18 18 18 07 05 06 06 06 06 06 23 23 08 29 19 21 14 04 06 06 08 09 12 17 17 13

64

Part No.

Page No.

Ref. No.

Part No.

071706 071706 071706 071706 071706 071706 071709 074090 076002 076586 077601 077601 077601 077836 077838 077839 078979 078979 078979 078979 078979 078979 078979 078979 079000 079000 079003 079039 079187 079187 079716 079923 080477 080477 080894 081377 081462 081463 082621 083429 083429 088841 088841 089139 089754 089755 089756 089867

23 25 27 27 29 29 17 28 27 58 15 16 17 59 59 59 42 43 44 45 46 47 48 49 46 47 19 32 06 35 58 33 19 20 61 27 59 59 58 42 43 07 59 57 07 07 07 15

13 04 04 58 21 25 26 12 66 09 17 05 05 07 05 08 02 03 03 03 02 03 03 03 03 02 24 09 18 21 02 22 01 01 02 34 02 04 17 03 02 32

089871 089872 089872 089872 090085 092021 092079 092079 092082 092082 094283 095129 095129 095129 095129 095166 095166 095196 095196 097528 097528 097529 097529 097546 097546 097582 097588 097588 097588 097662 097667 097668 097859 097859 097918 098196 098196 098196 098197 098197 098197 098221 098222 098259 098259 098497 098828 099112

15 34 22 27 12

Page No.

Ref. No.

15 15 16 17 32 59 19 20 16 17 59 42 44 46 48 42 46 30 31 09 57 09 57 19 20 09 48 49 51 19 19 19 30 31 28 10 11 53 12 13 55 09 09 19 20 09 29 19

10 16 04 04 08 03 06 06 14 14 06 07 06 07 06 04 04 14 14 01 01 07 07 22 11 10 21 27 22 13 13 11 01 01 01 01 07 08 08 08 21 11 23

Printed in U.S.A.

DC2340/2360 - NUMERICAL INDEX Part No.

Page No.

Ref. No.

35 06 59 59 59 59 59 59 60 60 60 60 44 45 50 10 11 10 11 12 13 09 09 09 10 11 12 13 20 20 10 11 12 13 10 11 12 13 15 16 17 15 27 25 35 33 42 42

01 15 08 01 02 03 09 10 13 13 13 13 11 10

112412 112413 112706 112884 112885 112886 112893 112898 113055 113056 113057 113058 115433 115433 115433 115556 115556 115558 115558 115558 115558 115561 115562 115563 115564 115564 115564 115564 115726 115727 116668 116668 116668 116668 116669 116669 116669 116669 117038 117038 117038 117039 117085 117086 117929 118110 118118 118119 Printed in U.S.A.

05 05 02 02 02 02 09 16 15 10 10 10 10 20 21 03 03 03 03 04 04 04 04 15 03 03 09 18 16 22 39 01 08

Part No.

118120 118121 118122 118123 118124 118125 118126 118127 118128 118128 118129 118130 118130 118131 118131 118132 118132 118133 118226 118226 118226 118226 118254 118254 118760 118802 119230 119269 119401 119500 119503 119805 119805 120779 124153 124475 124484 124543 124600 124604 124604 124608 124610 124619 124620 124626 124632 124634

Page No.

Ref. No.

42 42 42 46 46 46 46 46 44 48 44 44 48 44 48 44 48 48 42 44 46 48 07 60 17 60 60 60 60 60 06 07 60 07 32 06 06 07 28 25 27 07 06 19 27 06 27 27

06 09 11 01 08 06 09 11 01 01 10 05 05 13 13 12 12 10 10 14 10 14 34 02 15 01 05 14 24 21 06 70 01 06 09 01 17 01 01 35 01 31 05 07 38 36

65

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

124636 124646 124649 124651 124654 124655 124690 124692 124773 124776 124777 124861 124870 124871 124876 124877 124890 124900 124900 124904 124905 124906 124909 124910 124915 124950 124954 124955 124966 125077 125077 125078 125080 125080 125081 125081 125089 125089 125089 125094 125094 125347 125348 125350 125353 125354 125355 125367

25 27 20 29 27 17 19 20 17 58 58 32 30 30 30 30 17 22 23 16 16 15 21 16 17 35 15 15 09 16 17 17 30 31 30 31 34 40 41 19 20 28 28 27 15 15 32 27

24 55 22 04 16 23 33 17 19 01 01 06 01 02 08 09 02 07 07 09 10 04 02 02 16 04 19 20 02 15 15 09 12 12 11 11 14 21 21 02 02 10 15 05 02 03 06 61

125370 125371 125374 125374 125376 125377 125410 125420 125421 125422 125422 125423 125424 125425 125426 125426 125427 125427 125428 125428 125429 125429 125430 125430 125431 125431 125432 125432 125433 125433 125434 125434 125435 125435 125436 125436 125437 125437 125438 125438 125439 125440 125441 125441 125441 125442 125442 125445

31 31 16 17 31 31 28 28 27 53 55 53 53 53 53 55 53 55 53 55 53 55 53 55 53 55 53 55 53 55 53 55 53 55 53 55 53 55 53 55 53 53 09 53 55 53 55 10

01 02 15 15 08 09 17 14 17 01 01 02 03 04 05 05 06 06 07 07 08 08 09 09 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 19 24 20 18 21 19 09

907146/AP1195

DC2340/2360 - NUMERICAL INDEX Part No.

125445 125445 125445 125446 125446 125447 125447 125448 125448 125448 125448 125450 125450 125451 125451 125452 125452 125453 125453 125454 125454 125455 125455 125456 125456 125457 125458 125459 125460 125461 125461 125492 125492 125493 125494 125495 125496 125497 125502 125503 125752 125753 125757 125758 125774 125774 125775 125776 907146/AP1195

Page No.

Ref. No.

11 12 13 11 13 11 13 10 11 12 13 53 55 53 55 53 55 53 55 53 55 53 55 53 55 53 55 55 55 12 13 45 49 45 43 43 47 47 15 15 49 09 09 09 42 43 43 43

09 09 09 06 06 07 07 08 08 08 08 24 22 25 23 26 24 27 25 28 26 29 27 30 28 31 02 03 04 05 05 01 01 11 01 15 01 15 02 03 11 13 26 25 05 04 07 08

Part No.

125777 125778 125778 125778 125778 125784 125784 125785 125786 125787 125788 125788 125788 125788 125789 125789 125789 125789 125790 125790 125791 125791 125792 125792 125793 125794 125795 125797 125798 125799 125872 125873 125874 125874 125876 125878 125882 125883 125884 125885 125886 125946 126022 126022 126023 126109 126110 126112

Page No.

Ref. No.

43 42 43 46 47 46 47 47 47 47 44 45 48 49 44 45 48 49 45 49 45 49 45 49 50 50 50 50 50 50 50 50 50 51 51 51 27 27 51 51 51 59 25 27 25 37 37 60

09 12 10 12 10 05 04 07 08 09 02 02 02 02 04 04 04 04 07 07 08 08 09 09 02 03 04 06 07 08 12 13 17 09 01 03 24 25 13 15 16 04 22 30 21 16 19 05

66

Part No.

Page No.

Ref. No.

Part No.

126116 126123 126260 126267 126268 126271 126272 126273 126280 126281 126281 126282 126283 126284 126285 126285 126298 126299 126299 126321 126331 126331 126332 126332 126333 126342 126342 126346 126347 126412 126413 126431 126432 126432 126433 126433 126437 126442 126444 126444 126445 126447 126460 126462 126521 126525 126628 126629

60 37 40 40 41 41 40 41 38 38 39 39 38 39 40 41 37 40 41 40 38 39 38 39 36 06 35 36 36 22 23 41 38 39 38 39 35 33 22 23 33 33 32 32 06 35 57 57

07 12 01 03 01 03 02 02 33 28 28 33 32 32 16 16 20 11 11 06 29 29 34 34 01 19 19 06 07 01 01 06 27 27 35 35 13 19 03 03 20 21 18 10 15 01 01 02

126630 126631 126632 126634 126635 126636 126636 126637 126638 126639 126640 126641 126642 126643 126644 126645 126645 126646 126647 126648 126649 126650 126651 126652 126653 126654 126655 126656 126657 126658 126659 126660 126661 126735 126739 126744 126744 126755 126755 126755 126755 126756 126756 126756 126756 127040 127041 127042

Page No.

Ref. No.

57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 59 58 10 12 43 45 47 49 43 45 47 49 51 51 50

03 04 05 07 08 09 19 10 11 12 13 14 16 17 18 09 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 36 04 15 06 06 18 16 18 16 19 17 19 17 19 20 22

Printed in U.S.A.

DC2340/2360 - NUMERICAL INDEX Part No.

Page No.

Ref. No.

50 58 34 43 47 43 47 43 47 43 47 58 06 06 15 19 20 58 25 27 51 42 43 44 46 47 48 50 21 25 27 29 42 43 44 46 47 48 25 27 19 60 35 22 23 50 51 27

23 04 13 13 13 14 14 12 12 11 11 14 10 11 18 14 14 05 09 10 06 14 17 16 14 17 16 18 10 31 23 12 13 16 15 13 16 15 25 37 19 08 02 12 12 19 17 41

127043 130543 309173 510226 510226 510227 510227 510228 510228 510229 510229 520054 520092 520093 520195 520195 520195 520201 570002 570002 570002 570004 570004 570004 570004 570004 570004 570009 570014 570014 570014 570014 570014 570014 570014 570014 570014 570014 570019 570019 600595 650163 650183 650318 650318 650379 650379 650406 Printed in U.S.A.

Part No.

650409 650409 650426 650426 650426 650448 650453 650453 650459 650479 650479 650491 650491 650494 650495 650501 650528 650534 650534 650535 650535 650549 650549 650550 650550 650552 650569 650569 650573 650573 650573 650573 650577 650577 650579 650584 650584 650585 650606 650631 650650 650687 650687 650687 650687 650694 650694 650695

Page No.

Ref. No.

22 23 40 41 59 33 09 29 60 19 20 25 27 09 17 07 21 22 23 22 23 06 35 06 35 32 29 32 30 31 40 41 25 27 32 06 35 60 33 17 27 09 30 31 36 07 17 61

15 15 22 22 06 23 10 20 03 04 04 06 07 03 28 23 03 05 05 04 04 20 16 21 15 11 20 16 07 07 12 12 18 20 07 22 20 09 43 25 57 28 21 21 02 36 21 01

67

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

650704 650704 650704 650709 650711 650742 650745 650745 650758 650758 650758 650758 650758 650758 650758 650771 650773 650773 650781 650786 650786 650802 650802 650810 650810 650810 650834 650834 650834 650834 650834 650834 650834 650835 650857 650894 650926 650926 650946 650969 650969 650980 650980 650985 650985 650985 650985 651073

06 07 37 29 19 51 30 31 15 33 36 38 39 40 41 32 40 41 07 15 29 16 17 36 40 41 15 19 20 22 23 30 31 33 60 50 16 17 34 30 31 06 35 06 27 35 37 61

12 02 13 15 25 14 15 15 05 31 08 31 31 07 07 02 17 17 07 21 05 08 08 03 13 13 01 11 11 08 08 10 10 23 10 01 01 01 15 03 03 23 18 16 49 14 18 09

651123 651123 651148 651148 651148 651148 651148 651148 651164 651164 651164 651240 651240 651240 651240 651242 651275 651277 651277 653005 653005 653005 653005 653005 653005 653005 653007 653007 653007 653007 653007 653010 653010 653010 653010 653010 653010 653010 653010 653018 653018 653018 653018 653018 653018 653018 653018 653018

25 27 19 19 20 25 27 29 25 27 29 44 45 48 49 60 19 19 20 15 33 36 38 39 40 41 30 31 36 40 41 07 15 16 17 29 37 40 41 09 15 16 17 19 20 22 23 44

14 15 30 37 24 39 64 26 03 03 24 07 13 07 13 04 20 35 19 08 25 11 25 25 10 10 06 06 05 15 15 05 24 12 12 08 15 20 20 14 14 07 07 13 13 11 11 09

907146/AP1195

DC2340/2360 - NUMERICAL INDEX Part No.

653018 653018 653018 653021 653021 653021 653026 653026 653026 653026 653026 653029 653029 653044 653053 653053 653084 653102 653130 654002 654002 654002 654002 654002 654002 654002 654002 654002 654004 654004 654006 654006 654006 654006 654006 654006 654006 654006 654006 654006 654009 654009 654009

907146/AP1195

Page No.

Ref. No.

45 48 49 07 21 61 19 25 27 29 61 19 20 32 19 20 07 58 27 15 32 33 35 36 38 39 40 41 30 31 07 15 22 23 25 27 29 37 40 41 09 19 22

15 09 15 38 08 04 38 32 28 18 05 03 03 20 36 23 28 07 59 06 03 03 03 09 03 03 08 08 04 04 04 22 20 20 07 08 06 22 18 18 11 30 09

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

654009

23

09

654030

49

14

045–31406

29

03

654012 654014

07

29

654030

50

20

045–31407

27

39

19

28

654030

51

18

045–31407

29

13

654014

25

33

654030

60

11

200–32337

21

09

654014

27

31

654032

07

30

200–32344

21

05

654014

61

07

654032

07

37

200–32504

25

10

654016

07

24

654032

17

20

200–32504

27

11

654016

27

60

654032

25

13

200–32507

27

27

654022

15

07

654032

27

14

210–19470

30

22

654022

33

24

654032

61

03

210–19470

31

22

654022

36

10

654034

27

42

220–32251

07

21

654022

40

09

654034

29

17

220–32253

07

40

654022

41

09

654034

61

06

220–32253

60

02

654024

09

27

654046

22

21

220–32514

27

56

654024

30

05

654046

23

21

220–32515

25

05

654024

31

05

654051

32

13

220–32515

27

06

654024

36

04

654057

07

25

220–32517

27

33

654024

40

14

655006

35

24

220–32518

25

27

654024

41

14

655010

58

08

220–32519

25

17

654026

06

13

655016

60

12

220–32519

27

19

654026

07

03

655018

25

28

220–32520

25

20

654026

15

23

655020

32

14

220–32520

27

22

654026

16

11

655022

07

33

230–27100

25

23

654026

17

11

655022

07

42

230–27100

27

29

654026

29

07

655024

07

26

300–31903

21

01

654026

37

14

655046

07

31

310–32513

25

30

654026

40

19

656001

35

09

360–32499

27

40

654026

41

19

656030

09

17

360–32500

29

14

654026

50

16

656110

35

08

380–25728

19

29

654026

51

08

656113

09

20

380–32262

21

06

654030

09

12

656132

57

35

380–32350

27

30

654030 654030

15 16

13 06

656138 660005

09 37

19 21

385–27865 400–21904

27 25

29 11

654030

17

06

803099

61

400–21904

27

12

654030

19

12

806188

59

400–32443

25

26

654030

20

12

010–32322

15

11

420–33066

31

14

654030

22

10

030–17662

25

34

420–33620

34

17

654030

23

10

030–17662

27

32

420–34069

33

26

654030

29

10

030–31859

21

07

480–27676

25

12

654030

44

08

030–31861

21

12

480–27676

25

29

654030

45

14

030–31904

27

26

480–27676

27

13

654030

48

08

045–31404

27

65

983–01321

34

18

68

Printed in U.S.A.

TORQUE SPECIFICATIONS NOTE:

Use these torque values when tightening GEHL hardware (excluding: Locknuts and Self–tapping, Thread Forming and Sheet Metal Screws) unless specified otherwise.

All torque values are in Lb-Ft except those marked with an * which are Lb-In (For metric torque value Nm, multiply Lb-Ft value by 1.355 or Lb-In value by 0.113)

Unified National Thread

Grade 2

Grade 5

Dry

Lubed

Dry

Lubed

Dry

Lubed

8-32 8-36

19* 20*

14* 15*

30* 31*

22* 23*

41* 43*

31* 32*

10-24 10-32

27* 31*

21* 23*

43* 49*

32* 36*

60* 68*

45* 51*

1/4-20 1/4-28

66* 76*

50* 56*

9 10

75* 86*

12 14

9 10

5/16-18 5/16-24

11 12

9

17 19

13 14

25

18 20

3/8-16 3/8-24

20 23

15 17

30 35

23 25

45 50

35

7/16-14 7/16-20

32 36

24 27

50 55

35 40

70 80

55 60

1/2-13 1/2-20

50 55

35 40

75 90

55 65

110 120

80 90

9/16-12 9/16-18

70 80

55 60

110 120

80 90

150 170

110 130

5/8-11 5/8-18

100 110

75 85

150 180

110 130

220 240

170 180

3/4-10 3/4-16

175 200

130 150

260 300

200 220

380 420

280 320

7/8-9 7/8-14

170 180

125 140

430 470

320 360

600 660

460 500

1-8 1-14

250 270

190 210

640 710

480 530

900 1000

680 740

Metric Course Thread

Grade 8.8

8.8

Grade 10.9

Grade 8

10.9

Grade 12.9

12.9

Dry

Lubed

Dry

Lubed

Dry

Lubed

M6-1

8

6

11

8

13.5

10

M8-1.25

19

14

27

20

32.5

24

M10-1.5

37.5

28

53

39

64

47

M12-1.75

65

48

91.5

67.5

111.5

82

M14-2

103.5

76.5

145.5

108

176.5

131

M16-2

158.5

117.5

223.5

165.5

271

200



Gehl Company 143 Water Street, P.O. Box 179, West Bend, WI 53095-0179

907146/AP1195

GEHL Company 1995

Printed in U.S.A.