Gehl Disc Mower 165 Service Parts Manual(906558A) - PDF DOWNLOAD

Form No.

906558

Disc Mower

Ll..I

0::: ::J

b

::J U 0:::

19

«

.J J: SERVICE PARTSMANUAL

IU C

Introduction When ordering service parts, specify the correct part number, full description, quantity required, the unit model number and serial number.

The Disc Mower model and serial number is on a plate located on a Gusset on the Main Frame.

"Right" and "Left" are determined from a position standing behind the Disc Mower. From this position the Support Leg is on the "left" side.

GEHLe Company reserves the right to make changes or improvements in the design or construction of any part of the unit without incurring the obligation to install such changes on any previously delivered units.

Refer to the abbreviations table located on this page for the various fastener descriptions. Standard attach­ ing hardware torque values are also provided on the inside back cover.

In the exploded view parts list, Reference Numbers may have additional information following the Refer­ ence Number. A number in parentheses such as (4), will indicate a quantity of how many times that Refer­ ence Number is used. A Tear Drop symbol will indicate an application of a "wet" product such as oil, and the number inside the Tear Drop will correspond to the description in the Parts List. Also, a number inside of a hexagon will be the torque value required, in foot pounds, on the associated Reference Number. Items shown in the parts list that do not have Reference Numbers are shown for reference purposes only and are NOT available for purchase.

Unless otherwise specified, all Cap Screws or Bolts are Grade 5, cadmium or zinc plated; Hexagon Nuts for Grade 5 Screws or Bolts are Grade B; Hexagon Nuts for other Screws or Bolts are Grade A.

NO-;E: The following abbreviations may used herein: AR ASSY

CB CCW CS CW DC DEG DIA FHMS FHSCS FLN FLS GA GR HD HF J.D. INCL LG LH LT M MM/mm NC NF NO PB PTO RH RPM RT SAE SERR SMV SN T THMS THRD UNF WLDMT XT #

- As Required - Assembly

0

- Carriage Bolt - Counterclockwise - Cap Screw (Hexagon Head) - Clockwise - Drop Center - Degree - Diameter - Flat Head Machine Screw - Flat Head Socket Cap Screw - Flanged Lock Nut (Hexagon) - Flanged Lock Screw (Hexagon) - Gauge' - Grade - Hard or Head - Hard Fit - Inside Diameter - Includes - Large - Left Hand - Left - Metric - Millimeter - National Coarse - National Fine - Number - Plow Bolt - Power Take Off - Right Hand - Revolutions Per Minute - Right - Society of Automotive Engineers - Serrated - Slow Moving Vehicle - Serial Number or Slotted Nut - Tooth or Teeth - Truss Head Machine Screw - Thread - Universal National Fine - Weldment - Extended - Number.

- (Quantity Used)

TABLE OF CONTENTS Page Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Front Cover Table Of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Decal Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 Frame Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Lift Linkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Cutterbar Gearcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Cutterbar Screws & Nuts . . . . . . . . • . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Cutterbar Gears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Cutterbar Discs . . . . . . . . . . . . . . . • . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Belt Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Primary Gear Box Assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Pto . • • . . . . . . . . . . . . . . . . . . • . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Swath Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Inner Swath Board & Safety Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Cutterbar Safety Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Tool Box Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Options & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18 Spring AssistlCit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 80mm Skid Shoe Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20 Standard Hardware Torque Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover

Printed In U.S.A.

1

906558/1 P592

DECAL LOCATIONS The Decal Set Number for the DM162 and DM165 is 126360. The Set includes the following:

GENERAL INFORMATION Decal Locations information is provided to assist in the proper selection and application of new decals, in the event the original decals become damaged or the ma­ chine is repainted. Refer to the listing for the illustra­ tion reference number, part number, description and quantity of each decal provided in the Kit. Refer to the appropriate illustrations for replacement locations.

To insure proper selection of the correct replacement decals, compare all of the various closeup location photographs to your machine, before starting to refin­ ish the unit. Then, circle each pictured decal (on or otherwise applicable to your machine) while checking­ off its part number in the listing. After you have veri­ fied all the decals needed for replacement, place any extra unnecessary decals aside for disposal.

Ref. No. 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

Part Number 091444 093202 093365 093367 093373 093381 093466 093653 125368 125476

11.

126343 126344 126345 126348 126354

12.

13.

14.

NEW DECAL APPLICATION Surfaces MUST be free from dirt, dust, grease and other foreign material before applying the new Decal.

To apply, remove the smaller portion of the decal backing paper and apply this part of the exposed adhe­ sive backing to the clean surface while maintaining proper position and alignment. Peel the other portion of the backing paper off slowly while applying hand pressure to smooth-out Decal surface.

Description & Quantity DANGER· Rotating Drive Line DANGER· Electrical WARNING· Rotating Component WARNING· Manual WARNING· General WARNING - Lock Pin WARNING· 540 RPM WARNING -Rotating Drive Line Decal - Disc Hardware DANGER· Rot8'llng Knives (2 Piaces) Decal· 162 Decal· 165 Decal· GEHL Decal· Stripe Decal· Proper Knives

A CAUTION ALWAYS observe Safety Rules shown on De­ cals. If Decals become damaged, or If the unit Is repai nted, replace the Decals. If repainting, BE SU RE that ALL Decals from the Kit(s) which apply to your machine, are affixed to your unit.

PAINT NOTICE Use this list to order paint for refinishing: 906315 906316

906558/1 P592

One Gallon AG Red Paint 6 (12oz Spray Cans) AG Red Paint

2

Printed In U.S.A.

Printed In U.S.A.

3

906558/1 P592

DM165 - FRAME ASSEMBLY

Ref. No.

Part No.

01 02 03 04 05 06 07 08 09 10 11

613866 613889 613809 613810 613700 613883 613705 613702 613888 613707 613881 613834 613884 613743 613812 613890 613808 613894 613693 613736 613885 613893 613821 613814

12 13 14 15 16 17 18 19 20

21 22 23 24

906558/1 P592

Qty.

Description

Req.

SELF-LOCKING NUT ............ 2 ROLL PiN ....................... 1 HINGE PLATE .................. 1 MAIN FRAME ................... 1 PIN ............................. 1 ROLL PiN ....................... 2 SWIVEL PiECE .................. 1 PIN ............................. 1 ROLL PIN ...................... 1 LOCK PIN ...................... 1 ROLL PiN ....................... 1 PRESSURE SPRING ............ 1 ROLL PiN ....................... 1 STAND ......................... 1 PIN ............................. 1 ROLL PiN ....................... 1 3 POINT FRAME ................ 1 SPRING COTTER ............... 1 TOP LINK PIN .................. 1 TOOL BOX ...................... 1 ROLL PIN ...................... 1 LINCH PiN ...................... 2 LOWER LINK PIN LEFT .......... 1 SPACER ........................ 1

4

Ref. No.

Part No.

25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

613884 613704 613813 613765 613895 613763 613755 613756 613757 613879 613758 613867 613688 613802 613811 613926 613927 613820 613850 613859 613723 613687 613886

Qty. Description

Req.

ROLL PIN ....................... 1 CHAIN HOOK .................... 1 SUPPORT CHAIN ................ 1 LOWER LINK PIN CAT 2 ......... 1 SPRING COTTER ................ 1 BREAK-AWAY SLIDE ............ 1 BREAK-AWAY TONGUE .......... 1 BREAK-AWAY PAWL ............. 1 STUD ........................... 1 DISC SPRING ..................41 WASHER ........................ 1 SELF-LOCKING NUT ............. 1 SPECIAL SCREW ................ 1 NYLON BUSH ...................2 FIT BOLT ....................... 1 ALLEN WRENCH ................ 1 BOX SPANNER 16 ............... 1 LINK PIN EXTENSION PIECE ..... 1 SERR S-LOCKING SCREW ....... 2 SERR S-LOCKING NUT .......... 2 LOCK WASHER .................. 1 SELF-LOCKING SCREW ......... 1 ROLL PiN ....................... 1

Printed In U.S.A.

DM165· LIFT LINKAGE

~

~ ~ Ref. No.

Part

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15

613691 613806 613753 613815 a 613696 613891 613807 613857 613841 613917 613837 613709 613708 613921 613701

No.

Printed In U.S.A.

Description

Qty. Req.

SELF-LOCKING SCREW ......... 4 L1NK ...... . . ................... 1 LIFT-ROD ....................... 1 CYLINDER ............... .. .... . 1 PIN ........... . ............ . .... 2 SPLIT PiN ...................... 6 CONNECTING PLATE . .......... 2 SELF-LOCKING NUT ........ . ... 4 HEXAGON BOLT ................ 4 SEALING RING ................. 2 BANJO ........ . ................ 1 BANJO BOLT ................... 1 HYDRAULIC HOSE ..... . ........ 1 ADAPTER ....................... 1 PIN ........... ... .... . .......... 1

Ref. No.

Part

16 17 18 19 20 21 23 24 25 26 27 28

614000 614001 613742 613695 613882 613823 613824 613825 613892 613890 613698 613754 613887

a)

For Cylinder repair order 613943 Oil Seal Kit.

22

5

No.

Description

Qty. Req.

ROLL PIN . ......... .. .. . .... .... 1 ROLL PIN .......... . .. ... ...... . 1 SUSPENSION ROD . ... .. .. . .. . .. 1 SUSPENSION SPRING . ........ .. 1 ROLL PIN . . ....... ....... .... .. . 2 PiN ...... . ...... . ............... 1 SUSPENSION TUBE .. .. . . .. ..... 1 TRANSPORT LOCK PIN ... .. . .... 1 LINCH PIN ................. . . ... 1 ROLL PIN . ........ . ......... .. .. 1 UPPER FRAME CASTING ... . .... 1 PiN ............................. 1 ROLL PIN . ..... . .... . . ... ...... . 3

906558/1 P592

DM165 • CUTTER BAR GEARCASE

15

Ref. No.

Part

01 02 03 04 05 06 07 08 09 10 11 12

613794 125459 613795 613748 613739 613778 613740 613846 613848 125427 613773 613770

No.

906558/1 P592

Qty. Req.

Ref. No.

Part

GEAR CASE TOP PLATE ........ 1 O-RING ......................... 1 GEAR CASE BOTTOM PLATE .... 1 CORNER WEAR PLATE .......... 1 DISC GUARD WEAR RESISTANT 6 DISC GUARD WEAR RESISTANT 1 INNER SHOE ................... 1 SERR S-LOCKING SCREW ...... 2 SERR S-LOCKING SCREW ...... 2 PLUG/MAGNETIC DRAIN ........ 1 REINFORCING BAR FRONT ..... 1 FRONT CORNER BAR ........... 1

13 14 15 16 17 18 19 21 22 23 24

613775 613772 613797 613796 613920 125422 613777 613726 613776 613730 125426

Description

6

No.

Description

19

Qty. Req.

REINFORCING BAR END ......... 1 REINFORCING BAR END ......... 1 REINFORCING BAR REAR ....... 1 REAR CORNER BAR ............. 1 PLUG ........................... 1 PLATE/WEAR ...................5 WEAR PLATE ................... 1 WEAR PLATE ...................5 WEAR PLATE ................... 1 SPACER ........................ 1 RING/SEALING .................. 2

Printed In U.S.A.

DM165 - CUTTERBAR SCREWS & NUTS

Ref. No.

Part

01 02 03 04 05 06

613846 125442 613849 613850 613852 613859

No.

Printed In U.S.A.

Description

Qty. Req.

SERR S-LOCKING SCREW ...... 2 SCREW/LOCKING .............. 12 SERR S-LOCKING SCREW ..... 14 SERR S-LOCKING SCREW ..... 14 SERR S-LOCKING SCREW ...... 6 SERR S-LOCKING NUT •........ 25

7

Ref. No.

Part

07 08 09 10 11

613724 613863 613848 613851 125441

No.

Description

Qty. Req.

SPECIAL BOLT ..................8 SELF-LOCKING NUT .............8 SERR S-LOCKING SCREW ....... 8 SERR S-LOCKING SCREW ....... 1 SCREW/SELF-LOCKI NG ........28

906558/1 P592

DM165 - CUTTERBAR GEARS

Ref. No.

Part

01 02 03 04 05 06 07 08

125433 125432 125431 125430 125440 125439 613716 613907

No.

906558/1 P592

Description

Qty. Req.

GEAR/PINION ................... 3 GEARJlDLER .................... 5 GEAR/IDLER .................... 5 GEAR/PINION ................... 4 GEAR/IDLER .................... 3 GEAR/IDLER .................... 2 DRIVE GEAR ................... 1 SELF-ALIGNING BALL BEARING. 1

8

Ref. No.

Part

09 10 11 12 13 14 15

613899 613897 125436 125437 125435 125434 125438

No.

Description

Qty. Req.

RETAINING RING ................ 1 RETAINING RING ................. 1 RING/RETAINING ...............30 BEARING/BALL .................15 SCREW ........................15 SPACER .......................15 BUSH/NYLON ..................15

Printed In U.S.A.

DM165 • CUTTERBAR DISCS

Ref. No.

Part No.

01 05 06 07 08 09 10 11 12

613684 a 115564 613829 125445 125446 125448 125449 115558 125447 125450 125451

13 14

Printed In U.S.A.

Description

Qty. Req.

7 DISC HD CUTTERBAR ASSY ... 1 PLUG/END ...................... 2 INNER DiSC .................... 1 NUT/LOCKING ................. 14 BLADE/RIGHT .................. 8 BOLT/BLADE .................. 14 CENTER DISC .................. 5 DISC/RIGHT .................... 1 BLADE/LEFT .................... 6 NUT/LOCKING .................. 7 WASHER/SPRING ............... 7

Ref. No.

Part No.

15 16 17 18 19 22

125456 125455 125452 125453 125454 125457

a)

9

Description

Qty. Req.

BEARING/BALL .................. 7 RING/RETAINING ................ 7 HOUSING/BEARING .............6 O-RING ........................28 O-RING .........................7 HOUSINGIDISC .................. 1

Complete Cutterbar Assembly shipped less Discs, Knives, Bevel Gearbox, Skid Shoes, Reinforcing Plates and above related Hardware.

906558/1 P592

DM165 - BELT DRIVE .

30

-~

~

~

~

23

Ref. No.

Part

02 03 04 05 06 07 08 10

613896 613874 613904 613816 613710 613692 613860 613819 613862 613871 613822 613690 613723 613924

11

12 13 15 16 17

No.

906558/1 P592

Description

Qty. Req.

RETAINING RING ............... 1 PLAIN WASHER ................. 1 BALL BEARING ................. 2 SHAFT ......................... 1 HOUSING ....................... 1 PARALLEL KEY B ............... 1 SERR SELF-LOCKING NUT ...... 2 PULLEY ........................ 1 CAP NUT ZBC .................. 3 PLAIN WASHER ................. 3 SPACER BOLT .................. 3 SELF-LOCKING SCREW ......... 1 LOCK WASHER ................. 1 V-BELT (SET OF 4) ............. 1

Ref. No.

Part

18 19 20 21

613818 613703 613865 613713 613847 613712 613871 613925 613872 613786 613845 613856 613787 613788

22

23 24 29 30 31 32 33

34 35

10

No.

Description

Qty. Req.

PULLEy ......................... 1 TENSIONING ROD ............... 1 SELF-LOCKING NUT .............3 GUARD CONE ................... 1 SERR S-LOCKING SCREW ....... 2 U BOLT ......................... 1 PLAIN WASHER .................3 REFLECTOR RED ............... 1 PLAIN WASHER ................. 1 GUARD ......................... 1 SERR S-LOCKING SCREW ....... 1 CLAMP NUT ..................... 1 FRONT BELT GUARD ............ 1 REAR BELT GUARD ............. 1

Printed In U.S.A.

DM165 - PRIMARY GEAR BOX ASSY

Ref. No.

Pan No. 613801

01 02 03 04 05 06 07 07a 08 09 10 11

613910 613899 613906 613745 613913 613798 613905 613908 613916 613722 613912 613914

Printed In U.S.A.

Qty. Req.

Ref. No.

Pan

PRIMARY GEAR BOX ASSY ..... 1 CONSISTS OF: OIL SEAL ....................... 1 RETAINING RING .............. 2 BALL BEARING ................. 1 GEAR WHEEL AND PINION ...... 1 O-RING ......................... 1 GEAR HOUSING ................ 1 BALL BEARING ................. 1 SPHERICAL ROLLER BEARING .. 1 O-RING ......................... 1 SPACER ........................ 1 OIL SEAL ....................... 1 O-RING ......................... 2

12 13 14 15 16 17 18 20 21 22 23 24

613800 613723 613690 613767 613692 613919 613721 613738 613918 613799 613689 613877 613878

Description

11

No.

Description

Qty. Req.

REAR COVER . .................. 1 LOCK WASHER .................. 1 SELF-LOCKING SCREW ......... 1 SHAFT .......................... 1 PARALLEL KEY B ................ 1 PLUG ...........................2 PARALLEL KEY .................. 1 PRESSURE RELIEF VALVE ...... 1 SEALING RING .................. 1 FRONT COVER .................. 1 SELF-LOCKING SCREW ........12 SHIM RING 0.1 MM ...............2 SHIM RING 0.3MM ...............2

906558/1 P592

DM165- PTO

3

4

6

9

8

1r f~~~L~I~) ~~-tr~r.·~ 13

1

2

5

7

10

2

11

12

18

14

Ref. No.

Part No. 613685 613980 613981

01 02

613944 613945

03 04 05 06 07

613946 614002 613948 613958 613968

906558/1 P592

Description

Qty. Req.

PTO-SHAFT ...... . ............. 1 CONSISTS OF: INNER PTO HALF ASSY . ... ..... 1 (INCL 2,8-13, 15,16) OUTER PTO HALF ASSY ........ 1 (INCL 1-7, 13, 14, 16) YOKE .......................... 1 CROSS KIT ....... . ............. 2 (INCL 3-4) RETAINING RING .. ............. 8 GREASE ZIRK . ... ..... ......... 2 YOKE ................ . ......... 1 OUTER TUBE .......... . .. . ..... 1 ROLL PiN . . ..................... 1

12

15

Ref. No.

Part No.

08 09 10 11 12

613969 613970 613971 613972 613973

13 14

613974 613975

15

613976

16 17 18

613977 613978 613979

Description

Qty. Req.

ROLL PIN ....................... 1 INNER TUBE .................... 1 yOKE . . ....... .. ................ 1 GREASE ZIRK ........... . ....... 1 OVER RUNNING CLUTCH . .. ..... 1 (INCL 13) LOCK PIN ASSY ............. . ... 2 OUTERGUARD HALF .. . ...... .. . 1 (INCL 17) INNERGUARD HALF .... . ...... . . 1 (INCL 18) CHAIN .................. ... ..... 2 BEARING RING .................. 1 BEARING RING .... . ............ . 1

Printed In U.S.A.

DM165 .. SWATH BOARD

Ref. No.

Part

02 03 04 05 06 07 08 09 10

613855 613833 613830 613839 613838 613836 613832 613864 613840

No.

Printed In U.S.A.

Qty. Req.

Ref. No.

Part

SELF-LOCKING NUT .. . .. . .... . . 2 SWATH BOARD . .. . ..... . . . . ... . 1 SWATH STICK POINT ... . ....... 1 CUP SQUARE BOLT ... . .. . ..... . 1 CUP SQUARE BOLT ..... . ... . ... 1 SPRING ............... . ... . .... 1 DISHED WASHER .... . .......... 1 SELF-LOCKING NUT ............ 1 CUP SQUARE BOLT . . .. ... .. .. . . 1

11 12 13 14 15 16 17 18

613831 613854 613746 613791 613843 613858 613853 613863

Description

13

No.

Description

Qty. Req.

SWATH STICK ....... . ..... .. .... 1 SERR S-LOCKING SCREW . ... ... 1 SWATH BOARD BRACKET .. .... . 1 DEFLECTOR .... . ...... . .. . ..... 1 MUSHROOM HEAD SCREW . ..... 4 SELF-LOCKING NUT M10 ...... . .4 SERR S-LOCKING SCREW ....... 1 SELF-LOCKING NUT ............ . 1

906558/1 P592

DM165 -INNER SWATH BOARD & SAFETY GUARD

cvCOO)®

\1

21----......"

Ref.

Part

No.

No.

01 02 03 04

613741 613732 613733 613735

906558/1 P592

Descrlp'tlon

Qty. Req.

INNER SWATH BOARD .......... 1 BRACKET ....................... 1 BRACKET ....................... 1 BRACKET ....................... 1

14

Ref.

Part

No.

No.

05 06 07

613843 613871 613858

Description

Qty. Req.

MUSHROOM HEAD SCREW ...... 5 PLAIN WASHER .................4 SELF-LOCKING NUT M10 ........5

Printed In U.S.A.

DM165 - CUTTER BAR SAFETY SHIELD

Ref. No.

Part

01 02 03 04 05 06 07 08 09

613827 613842 613789 613858 613803 613792 613843 613844 613869

No.

Printed In U.S.A.

Description

Qty. Req.

PROTECTION COVER ........... 1 HEXAGON BOlT ................ 5 FRONT ARM .................... 4 SELF-lOCKING NUT M10 ....... 25 SAFETY FRAME ................ 1 REAR ARM .........•........... 5 MUSHROOM HEAD SCREW ..... 10 MUSHROOM HEAD SCREW .... . 10 PLAIN WASHER ................ 10

15

Ref. No.

Part

10 11 12 13 14 15 17 18 19

613870 613793 613793 613805 613790 613804 613744 613731 613694

No.

Description

Qty. Req.

PLAIN WASHER .................2 STRAP .......................... 1 STRAP .......................... 1 FRONT BAR ..................... 1 FRONT ARM OUTER ............. 1 REAR BAR ...................... 1 SAFETY-GUARD ................. 1 SPECIAL LOCKING DEVICE ...... 1 SELF lOCKING SCREW .......... 1

906558/1 P592

DM165· TOOL BOX COMPONENTS

Ref. No.

Part

01 02 03

125445 125448 125447

No.

906558/1 P592

Description

Qty. Req.

NUT/LOCKING .................. 7 BOLT/BLADE . .. .. . .. . ..... . .... 7 BLADE/LEFT . . ... ...... ......... 6

16

Ref. No.

Part

04 06 07

125446 613928 613926

No.

Description

Qty. Req.

BLADE/RIGHT ..... . . . ...........8 BOX SPANNER ............. . .. .. 1 ALLEN WRENCH ........ .. ...... 1

Printed In U.S.A.

DM165 - OPTIONS & ACCESSORIES

Ref. No.

Part No. 805628

01 02 03 04 05

613949 613950 613951 613952 613701

Printed In U.S.A.

Description

Qty. Req.

SPRING ASSIST KIT (DM165) .... 1 CONSISTS OF: SUSPENSION SPRING .......... 1 TIE ROD ........................ 1 SPRING ATTACHMENT .......... 1 CYLINDER PiN .................. 1 PiN .......... , , ................. 1

11

Ref. No.

Part

06 07 08 09 10 11

613883 613887 613953 613954 613879 613867

No.

Description

Qty. Req.

ROLL PIN .......................2 ROLL PIN ....................... 1 SPRING SUPPORT .............. 1 HEXAGON SCREW .............. 1 DISC SPRING ................... 1 SELF-LOCKING NUT ............. 1

906558/1 P592

DM165· OPTIONS" ACCESSORIES

_ _ _ _ _ _ _ _ _ _ _'' ' _ _

Ref. No.

Part No. 805626

01

613961

906558/1 P592

Description

_

""_ _ _ _ _ _ _ _' "_'lXWW",,_ _ _ _ _ _ _ _ "'''''_'''''''_ _

Qty. Req.

80MM SKID SHOE KIT ........... 1 CONSISTS OF: DISC GUARD ................... 4

18

Ref. No.

Part

02 03

613962 125441

No.

Description

Qty. Req.

INNER SHOE .................... 1 SCREW/SELF-LOCKI NG .........8

Printed In U.S.A.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ DM165 - NUMERICAL INDEX Part No. 115558 115564 125422 125426 125427 125430 125431 125432 125433 125434 125435 125436 125437 125438 125439 125440 125441 125441 125442 125445 125445 125446 125446 125447 125447 125448 125448 125449 125450 125451 125452 125453 125454 125455 125456 125457 125459 613684 613685 613687 613688 613689 613690 613690 613691 613692 613692 613693 613694 613695 613696 613698 613700 613701

Page Ref. No; No. 09 09 06 06 06 08 08 08 08 08 08 08 08 08 08 08 07 18 07 09 16 09 16 09 16 09 16 09 09 09 09 09 09 09 09 09 06 09 12 04 04 11 10 11

05 10 11 04 15 05 05 05 04 05

Printed In U.S.A.

11 05 18 24 10 04 03 02 01 14 13 11 12 15 06 05 11 03 02 07 01 08 04 12 03 09 02 10 13 14 17 18 19 16 15 22 02 01 46 37 23 15 14 01 07 16 19 19 19 05 26 05 15

Part No. 613701 613702 613703 613704 613705 613707 613708 613709 613710 613712 613713 613716 613721 613722 613723 613723 613723 613724 613726 613730 613731 613732 613733 613735 613736 613738 613739 613740 613741 613742 613743 613744 613745 613746 613748 613753 613754 613755 613756 613757 613758 613763 613765 613767 613770 613772 613773 613775 613776 613777 613778 613786 613787 613788

Page Ref. No. No. 17 04 10 04 04 04 05 05 10 10 10 08 11 11

04 10 11 07 06 06 15 14 14 14 04 11

06 06 14 05 04 15 11 13 06 05 05 04 04 04 04 04 04 11 06 06 06 06 06 06 06 10 10 10

Part No. 613789 613790 613791 613792 613793 613793 613794 613795 613796 613797 613798 613799 613800 613801 613802 613803 613804 613805 613806 613807 613808 613809 613810 613811 613812 613813 613814 613815 613816 613818 613819 613820 613821 613822 613823 613824 613825 613827 613829 613830 613831 613832 613833 613834 613836 613837 613838 613839 613840 613841 613842 613843 613843 613843

05 08 19 26 07 10 13 12 06 23 21 07 18 09 45 16 13 07 21 23 18 02 03 04 20 20 05 07 01 18 14 17 04 13 04 03 27 31 32 33 35 30 28 15 12 14 11

13 22 19 06 31 34 35

19

Page I.. A. No. No. 15 15 13 15 15 15 06 06 06 06 11 11

11

03 14 14 06 11 12 01 03 16 15 06 22 12

11

04 15 15 15 05 05 04 04 04 04 04 04 04 05 10 10 10 04 04 10 05 05 05 15 09 13 13 13 13 04 13 05 13 13 13 05 15 13 14 15

38 05 15 13 02 07 17 03 04 39 15 27 24 04 05 18 10 42 23 13 21 22 23 01 06 04 11

08 03 12 07 11 06 05 10 09 02 15 05 07

Part No. 613844 613845 613846 613846 613847 613848 613848 613849 613850 613850 613851 613852 613853 613854 613855 613856 613857 613858 613858 613858 613859 613859 613860 613862 613863 613863 613864 613865 613866 613867 613867 613869 613870 613871 613871 613871 613872 613874 613877 613878 613879 613879 613881 613882 613883 613883 613884 613884 613885 613886 613887 613887 613888 613889

Page Ref.

No.

No.

15 10 06 07 10 06 07 07 04 07 07 07 13 13 13 10 05 13 14 15 04 07 10 10 07 13 13 10 04 04

08 32 08 01 22 09 09 03 43 04 10 05 17 12 02 33 08 16 07 04 44 06 08 11 08 18 09 20 01 36

17

11

15 15 10 10 14 10 10

09 10 12 24 06 30 03 24

11 11

04 17 04 05 04 17 04 04 04 04 05 17 04 04

34 10 11 20 06 06 13 25 21 47 28 07 09 02

906558/1 P592

DM165· NUMERICAL INDEX _ _ _ _ _ _ _ _ _ _ _ _ __ Part

Page Ref.

No.

No.

No.

04 05 05 05 04 04 04 10 08 08 11 10 11 11 08 11 11 11 11 11 11 05 11 11 06 05 10 10 04 16 04 16 05 12 12 12 12 17 17 17 17 17 17 12 18 18 12 12 12 12 12 12 12 12

16 25 06 24 22 18 29 02 10 09 02 04 07 03 08 07a 01 10 05 11 08 10 21 17 17 14 17 29 40 07 41 06

613890 613890 613891 613892 613893 613894 613895 613896 613897 613899 613899 613904 613905 613906 613907 613908 613910 613912 613913 613914 613916 613917 613918 613919 613920 613921 613924 613925 613926 613926 613927 613928 613943 613944 613945 613946 613948 (613949 613950 613951 613952 613953 613954 613958 613961 613962 613968 613969 613970 613971 613972 613973 613974 613975

906558/1 P592

Part No. 613976 613977 613978 613979 613980 613981 614000 614001 614002 805626 805628

Page Ref. No. No. 12 12 12 12 12 12 05 05 12 18 17

Part No.

Page Ref. No. No.

Part No.

Page Ref. No. No.

15 16 17 18 19 20 16 17

04

01 02 03 05 01 02 03 04 08 09 06 01 02 07 08 09 10 11 12 13 14

20

Printed In U.S.A.

TORQUE SPECIFICATIONS FOR STANDARD MACHINE HARDWARE All Torque Values are In Ft·Lbs unless otherwise stated.

(Multiply In·Lb value* by 0.113 or Ft·Lb value by 1.355 to obtain metric Nm value.)

Bolt Size

GR.5

GR.2

Dry

Lub.

Dry

GR.8

Lub.

Dry

Lub.

* In·Lb

NOTE: These torque values are to be used for al/ GEHL hardware excluding: Locknuts, Self-tapping Screws, Thread Forming Screws and Sheet Metal Screws. Unless otherwise specified, al/ torque values must meet this specification.

TORQUE SPECIFICATIONS FOR METRIC ATTACH ING HARDWARE Grade Metric Bolt Size

GR. 8.8

GR. 10.9

GR. 12.9

Dry

Lub.

Dry

Lub.

Dry

Lub.

M6

8.0

6.0

11.0

8.0

13.5

10.0

M8

19.0

14.0

27.0

20.0

32.5

24.0

M10

37.5

28.0

53.0

39.0

64.0

47.0

M12

65.0

48.0

91.5

67.5

111.5

82.0

M14

103.5

76.5

145.5

108.0

176.5

131.0

M16

158.5

117.5

223.5

165.5

271.0

200.5

®

Gehl Company 143 Water Street, Po. Box 179. West Bend. WI 53095-0179

906558/1 P592

C GEHL Company 1992

Printed In U.S.A.