Chapter 8 SERVICE & STORAGE When a problem occurs, don’t overlook simple causes such as an empty fuel tank. Check for leaks and broken connections. Make note of any specific problem symptoms, noises, etc. and contact your local Gehl dealer.
GENERAL INFORMATION
WARNING
IMPORTANT: Always dispose of waste lubri-
BEFORE performing any service on the Telescopic Loader, unless expressly instructed to the contrary, exercise the MANDATORY SAFETY SHUTDOWN PROCEDURE (Safety chapter). After service has been performed, BE SURE to restore all guards, shields and covers to their original positions BEFORE resuming machine operation.
cating oils, anti-freeze and hydraulic fluids according to local regulations or take them to a recycling center for disposal. DO NOT pour them onto the ground or into a drain.
DEALER SERVICES The following areas of internal components service replacement and operating adjustments should only be attempted by (or under the direction of) an authorized GEHL Telescopic Loader dealer.
NOTE: All service routines, with the exception of
IMPORTANT: DO NOT service or repair major
those described under the “Dealer Services” topic, are owner-operator responsibilities. All operator services described under the subtopics are also referred to on a decal located inside the small rear access door of the operator’s station. Refer to the LUBRICATION chapter of this manual for lubrication information.
components, unless authorized to do so by your Gehl dealer. Any unauthorized repair will void the warranty.
POWER TRAIN COMPONENTS The engine and transmission are coupled together with a transfer case. All service routines, related to the internal components are precise and critical to proper power train operation. The axle differential and planetary ends are also sophisticated assemblies which require special know-how and tools for servicing.
NOTE: This SERVICE & STORAGE chapter details procedures to follow for making routine maintenance checks, adjustments and replacements. The majority of the procedures are also referred to in the MAINTENANCE chapter of this manual. For engine related adjustments and servicing procedures, refer to the engine manual provided.
ponentry is suspected of faulty operation, contact your Gehl dealer for further assistance.
PRECAUTIONS
HYDRAULIC SYSTEM COMPONENTS
DO NOT perform any maintenance or repair without the owner’s prior authorization. Allow only trained personnel to service the machine.
Valves, pumps, motors and cylinders are also sophisticated assemblies which require special know-how and tools for servicing. All cylinders are approprietly designed with particular strokes, diameters, checks and hose connection provisions unique to the machine application requirements. A schematic (located at the end of this manual) can be used as a guide for service reference, as required.
IMPORTANT: If any area of power train com-
WARRANTY repairs can only be done by a GEHL dealer. He will know what portions of the machine are covered under the terms of the GEHL Warranty and what portions are covered by other vendor OEM warranties.
PRINTED IN U.S.A.
45
908448/AP101
