SAFETY Safety Guards and Warning Devices
Modifications, Nameplates, Markings and Capacities
 This machine is fitted with a roll-over protective structure (ROPS) and falling object protective structure (FOPS) in accordance with industry standards. Do not modify the ROPS/FOPS structure. If the ROPS structure is damaged, it must be replaced, because repair cannot restore its full energy-absorbing capability. It is intended to offer protection to the operator from falling objects, and in the event of an overturn, but cannot protect against every possible hazard. Therefore it should not be considered a substitute for good judgment and safe practices in operating the machine.
 Modifications and additions that affect capacity or safe operation shall not be performed without the manufacturer’s prior written approval. Where such authorization is granted, tags or decals shall be changed accordingly.
 All attachment tools MUST be marked to identify the attachment tool and the total capacity with attachment tool at maximum elevation with load laterally centered.
 ALWAYS be sure all nameplates, caution and
 An optional front window guard is available to
instruction markings are in place and legible. Local government regulations may require specific decals, which then become the responsibility of the local owner to provide.
offer additional protection from objects that may come in contact with the windshield.
 This machine is equipped with a rear view mirror, horn, and backup alarm. The user must determine if operating conditions require the machine be equipped with additional devices (mirrors, rotating beacon, etc.) and be responsible for providing and maintaining such devices.
 Study the load chart carefully. It shows maximum capacity to be lifted and placed at specific outward and upward distances. ALWAYS be aware of load weights prior to attempting lift and placement with this machine.
908448/AP101
14
PRINTED IN U.S.A.
