FENDT NA Hay Equipment SLICER 3060 TL 3060 TLKC 3060 TLRC Operator's Manual

1!R. :s ti

ºL 7711 QlglttbJe

~IILI

11:.nll

SLICER 81\27.. .,.,. 1 1; ·;7· zlEles 3060 TL FBG

00101

3060 TLKC FBK

00101

3060 TLRC FBL

00101

AGCO Feucht GmbH · FellastraBe 1-3 · D-90537 Feucht NM!XGCO FENDT ê4 C I Ili I f ··q %17777 717 ©AGCO2016 Aaiyi,dl l(X"Jfl': 1if 771 lgg!!Lf •=-:ling

09.2016

1 ----■ 01 EAME Iler■

fllf TI

EU Declaration of Conformity Manufacturer AGCO Feucht GmbH Fellastrar.ie 1-3 90537 Feucht Germany

Product Designation: Disc mower Model: SLICER 3060 TL SLICER 3060 TLKC SLICER 3060 TLRC

The machine meets the relevant provisions of the following directives: •

Machinery Directive 2006/42/EC

The following harmonized standards have been applied: •

DIN EN ISO 12100:2011

•

DIN EN ISO 4254-1 :2011

•

DIN EN ISO 4254-12:2012

Feucht, 01/09/2016; Ulrich Nickol (Managing Director); Bernhard Kohl (Head of Design)

Contents 1 2

lntroduction Safety 2.1 2.2 2.3 2.4 2.5

3 5

lntended use Reasonably foreseeable misuse

5 5

Warranty and liability User qualifications Warnings and symbols

5 5 6

Warning notices on the machine 2.6 Safety instructions 2.7 2.7.1 General safety instructions 2.7.2 Special safety instructions 3 Machine description

7 9 10 11

3.1 3.2 3.3 3.4 4 4.1 4.2 4.3

5 5.1 5.2

6

Product features Notices on the machine Special equipment Machine components Specifications Machine data Noise information Axle loads, gross weight and minimum ballast required Before initial operation Assembling the machine Adjusting the PTO shaft Attachment to the tractor

6.1 6.2 6.3 6.4 6.5

lnitial operation Coupling the machine Connecting the PTO shaft to the tractor Connect hydraulics Connecting the lighting 7 Transport position and working position Switching the machine to transport position 7.1 7.2 Switching the machine to working position 8 Using the machine Settings 9 9.1 9.2

Adjusting cutting height Adjusting the ground pressure Adjusting the tine rotor conditioner (KC) 9.3 Adjusting the conditioner intensity 9.3.1 Adjusting the swath guiding assembly 9.3.2 9.4 Adjusting conditioners with rubber rollers (RC) 9.4.1 Adjusting the conditioner intensity Adjusting the swath guiding assembly 9.4.2 10 Optional functions

SLICER 3060 TL / SLICER 3060 TLKC / SLICER 3060 TLRC

12 12 13 14 15

16 16 17 18

19 19 19

21 21 21 23 24 24

25 25 26

27 28 28 28 29 29 30 30 30 31

32

1

10.1 Greater cutting height using anti-wear skids 10.2 Swath guiding disc 10.3 KC spreader 11 Machine storage 12 Rectifying faults 12.1 lf the machine runs over an obstacle 12.2 Adjusting the impact guard 12.3 Replacing the driveGUARD 12.3.1 Preparatory work 12.3.2 Mower disc without feed drum 12.3.3 Mower disc with feed drum 12.3.4 Checks after replacing a driveGUARD element 12.4 Overload protection system for the conditioner 12.5 Blockages at the conditioner 13 Servicing 13.1 Maintenance intervals 13.2 Accessing the maintenance points 13.3 Cleaning 13.4 Tightening torques for nuts and bolts 13.5 Adhesive notices on the machine 13.6 PTO shaft 13. 7 Hydraulic system 13.8 Gearbox 13.8.1 Angle drive 13.8.2 Entry gearbox and cutter bar 13.9 Cutter biades 13.9.1 Checking the cutter biades 13.9.2 Checking the cutter-blade bolt 13.9.3 Checking the biade retaining bolt 13.9.4 Checking the holding spring 13.9.5 Replacing the cutter biades and/or cutter-blade bolt 13.9.6 Replacing the cutter biades 13.9. 7 Replacing the biade retaining bolt and/or the holding spring 13.1 O Screen element of the TurboLift system 13.11 Check the protective covers 13.12 Lubrication instruction 14 lndex

2

32 32 32 33 35 36

37 37 38 38

40 42 42 42 43 43 44

45 45 45 46 46

48 48 48 49 49 49 50 50 50 51 53

54 54 54 60

SLICER 3060 TL / SLICER 3060 TLKC / SLICER 3060 TLRC

lntroduction

1

lntroduction

These operating instructions for the SLICER 3060 TL disc mower contain detailed instructions and information regarding safe use, maintenance, special precautions and any special equipment that is available.

Other applicable documentation includes: •

Operating instructions for the relevant PTO shaft,

•

HYDAC operating instructions.

Storage of documentation

As a result of continuous further development of the machines, all technical data, figures and photos in these operating instructions are non-binding and we reserve the right to make changes. No alteration service is offered for these operating instructions .

J•

Note

ln arder to visualise it better, safety equipment and covers have been removed or opened in some of the illustrations or photos featured in these operating instructions.

Warning!

Ris k of injury from mis s ing s afety equipment.

There is a serious risk of injury if safety equipment and covers are not installed correctly, are not working properly or have been intentionally removed.

-+

AII safety equipment and covers must be in good condition and closed before you operate the machine for the first time.

Operational instructions The arrow➔ indicates an instruction for performing an operation.

-+

Fig. 1

Storage of documentation

Keep these operating instructions and all other relevant documentation in the document container (1) so that they are available on request. The document container is tightly screwed to the machine.

Applicability of the instructions These operating instructions are only valid for SLICER 3060 TL disc mowers as of the serial number that is specified on the back of these instructions. The serial number for your mower is shown under "Machine number" on the rating plate.

1•

Note

The SLICER 3060 TL disc mower will also be referred to as "machine" in the followinq sections.

Always follow all operational instructions in the specified sequence.

Other applicable documentation When operating the SLICER 3060 TL disc mower, pay close attention to all operating instructions that are included with the other components of your mower.

SLICER 3060 TL / SLICER 3060 TLKC / SLICER 3060 TLRC

3