Dynapac Pneumatic Tire Roller CP2700 Operating & Maintenance Manual 4812325557 - PDF DOWNLOAD

Page 58

Long-term storage Hydraulic oil reservoir Fill the hydraulic reservoir until the uppermost level mark (refer to the section "Every 10 Hours of Operation").

Tires Make sure the tires pressure is at least 200 kPa (29 PSI).

Steering cylinder, hinges, etc. Grease the steering cylinder plunger spindle to preserve it. Also lubricate the hingers on the engine compartment and cab doors.

Hoods, tarpaulin Lower the instruments hood/covering over the instrument panel. Cover the entire roller with a tarpaulin. It shall have a gap between it and the ground. If possible, store the machine indoors and preferably in a place with regular temperature. When stopping and parking the equipment, always apply the parking brake. As a precaution measure, chock the roller tires when parking on slopes and turn off the engine. To prevent accidents, when parking on slopes, stop transversally to the road towards the slope. Never leave the roller with the engine running. Before leaving it, apply the emergency/parking brake. Make sure the roller is parked in a safe place and that it is not obstructing the traffic.

54

4812325557EN

2018-02-19


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.
Dynapac Pneumatic Tire Roller CP2700 Operating & Maintenance Manual 4812325557 - PDF DOWNLOAD by www.heydownloads.com - Issuu