1 minute read
Operation – Emergency procedures
from Dynapac DTR75D Walk behind twin drum roller Operation & Maintenance Instruction Manual DL820751 PDF
6.7 Emergencyprocedures
6.7.1 Disconnectingthebattery
In event of emergency, e.g. in case of a cable fire, disconnect the battery from the vehicle network.
1. Flip open the cap.
ð The pole clamp comes off the minus pole.
2. Remove the pole clamp from the battery and place it aside.
6.7.2 Deactivatingthereversingprotection
The reversing protection protects the operator from being crushed between the machine and an obstacle during reverse travel.
If reversing protection is activated, the machine brakes to a standstill.
The travel lever is disengaged by the reversing protection, the machine cannot be moved forward or backward.
Operation – Emergency procedures
Prerequisites: n Reversing protection has been triggered. n The machine is at a standstill. n The travel lever is disengaged. ð Vibration is switched off after a short time.
1. Step aside from the machine, slightly lift the steering rod for this, if necessary.
2. Shift the vibration lever to position “0”, if necessary.
B-834-0328
3. Set the throttle lever to “MIN” position (idle speed).
4. Shift the travel lever to neutral position. ð The travel lever is engaged again.
