Loading / transporting the machine – Loading the machine 7.1 Loading the machine Loads may only be attached and hoisted by an expert/qualified person. Do not use lashing points that are damaged or impaired in any way. Only use lifting and lashing tackle with sufficient load bearing capacity for the weight to be loaded. Minimum load bearing capacity of lifting tackle: see operating weight Ä Chapter 2 ‘Technical data’ on page 11. Always use appropriate lashing tackle at the lashing points. Use lashing tackle only in the specified loading direction. Lashing tackle must not be damaged by machine parts. When lifting the machine, make sure the load does not move in an uncontrolled way. If necessary, hold the load steady with guide ropes. Protective equipment: n Working clothes n Safety shoes n Protective gloves 1.
Park the machine safely Ä Chapter 6.5 ‘Parking the machine in secured condition’ on page 60.
2.
Allow the engine to cool down.
3.
Move the steering rod to an upright position and engage the locking pawl lever securely.
4.
Attach the lifting tackle to the dedicated lifting eye.
B-695-0155
Fig. 53
5. DANGER! Danger to life caused by suspended loads! – Do not step or stand under suspended loads. B-695-0008
Lift the machine carefully and set down again at the intended location.
Fig. 54
62
DRP15D
