Dynapac Concrete Equipment CF Frequency Converters Instructions & spare parts catalogue Manual

CONCRETE EQUIPMENT

CF Frequency Converters

Instructions and spare parts catalogue

Manuel number: 4812050294_ENG Revision: 2

INSTRUCTIONS MANUAL – CF

File: 4812050294_EN_NO.doc

Page 2 / 26

Original instructions

INSTRUCTIONS MANUAL – CF

SUMMARY SAFETY RULES..................................................................................................................4 GENERAL ...........................................................................................................................6 DESIGN ...............................................................................................................................6 TECHNICAL DATA .............................................................................................................6 BUILT-IN PROTECTIONS...................................................................................................7 DESCRIPTION OF CABLE AND PROTECTIVE DEVICES ................................................7 CONNECTIONS ..................................................................................................................8 COMMISSIONING...............................................................................................................8 SELECTION OF A FREQUENCY CONVERTER ................................................................8 INSTALLATION...................................................................................................................8 OPERATION .......................................................................................................................9 MAINTENANCE ..................................................................................................................9 Cleaning ..........................................................................................................................................................9 Bearings ..........................................................................................................................................................9 Terminal box ...................................................................................................................................................9 Disassembly – reassembly ...........................................................................................................................10

ELECTRIC CONNECTIONS .............................................................................................10 CF67T ...........................................................................................................................................................10 CF67T-CI4P ..................................................................................................................................................11 CF25T ...........................................................................................................................................................12 CF25M and CF11M.......................................................................................................................................12

MEASUREMENTS ............................................................................................................12 TROUBLE SHOOTING .....................................................................................................13 The connected vibrators doesn’t run or run at low speed .............................................................................13 The converter doesn’t start or starts and stops in operation.........................................................................13

SPARE PARTS CATALOGUE ..........................................................................................14 CF67T and CF67T-CI4P ...............................................................................................................................15 CF25M and CF25T .......................................................................................................................................19 CF11M...........................................................................................................................................................22

File: 4812050294_EN_NO.doc

Page 3 / 26

Original instructions

INSTRUCTIONS MANUAL – CF

SAFETY RULES

WARNING

Read all safety warnings designated by the symbol all instructions

and

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. General Power Tool Safety Warnings

WORK AREA

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while operating a power tool. Distraction can cause you to lose control.

General Power Tool Safety Warnings

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increase risk of electric shock if your body is grounded.

Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Damaged cords increase the risk of electric shock.

When operating a power tool outside, use an outdoor extension cord for outside use only. Use of a cord suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

General Power Tool Safety Warnings

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under influence of drugs, alcohol or medication. A moment of inattention while operating power tools result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

Remove adjusting keys or switches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose closing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts.

File: 4812050294_EN_NO.doc

Page 4 / 26

Original instructions

INSTRUCTIONS MANUAL – CF If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

General Power Tool Safety Warnings

TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

General Power Tool Safety Warnings

SERVICE

Have your power tool serviced by a qualified repair person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

File: 4812050294_EN_NO.doc

Page 5 / 26

Original instructions

INSTRUCTIONS MANUAL – CF

GENERAL The frequency converters are machines designed to supply motor in head pokers with high frequency and suitable voltage. They are powered from the main and act as isolating transformers to work in secure conditions.

Further more CF67T converter may be used to run 6000rpm external vibrators with an additional protection box on the secondary.

The electronic and electric devices may contain potentially hazardous substances. Don’t throw them in nature but evacuate them according to the local regulations and the legislation in force in the country of use.

According to the European directives 2002/95/CE and 2002/96/CE. The original manual is in English.

DESIGN A frequency converter is a machine made of an electric motor mechanically driving a collector generator.

This generator is brushless, the rotor is designed with permanent magnet. That solution allows less maintenance and no carbon brushes anymore. This design is customer friendless and dedicated for the field and heavy duty jobs.

At the upper part of the machine a terminal box includes the start/stop push-buttons, the contactor as well as the CEE outlets to plug the vibrators.

In CF67T, thermal protections are located in the motor and generator windings. They release the contactor in case of overheating due to an unexpected situation (secondary overload, high ambient temperature).

For all the converters, the start button includes a thermal overload protection (see chapter Built-in protections).

The CFs are delivered on a steel frame with wheels for easy moving in field in standard for CF67T and as an option (additional field kit) for CF25M/T. The CI4P version is designed especially for external vibrators with protected outlets. In this version, a motor breaker is wired between each outlet and the generator (see the chapter Electric connections).

TECHNICAL DATA Type

Input Voltage

2 400V-3-50Hz CF67T 440V-3-50Hz CF67T 2 CF67T CI4P 400V-3-50Hz CF67T CI4P 440V-3-50Hz

Number of outlets : Dimensions (LxWxH) (mm) : Weight : Protection index : Primary Voltage tolerance : Ambient temperature :

1 2

Output voltage

Output Current

Output Power

Noise 1 pressure LpA dB(A)

Noise 1 power LwA dB(A)

10,5A 9,5A

42V-3-200Hz 42V-3-200Hz

65A 65A

4,7kVA 4,7kVA

85 85

96 96

10,5A

42V-3-200Hz

65A

4,7kVA

85

96

9,5A

42V-3-200Hz

65A

4,7kVA

85

96

Input Current

4 775x460x690 70kg IP55 ±10% -10°C to +40°C

Noise power level, LpA and LwA in dB(A) measured according to ISO3744. frequency converter with plug

File: 4812050294_EN_NO.doc

Page 6 / 26

Original instructions

INSTRUCTIONS MANUAL – CF

Type

Input Voltage

CF25T CF25T CF25M CF25M

400V-3-50Hz 440V-3-50Hz 115V-1-50Hz 230V-1-50Hz

Number of outlets : Dimensions (LxWxH) (mm) : Weight : Protection index : Primary Voltage tolerance :

Input Current 4,6A 4,2A 16A 9,5A

Output voltage 42V-3-200Hz 42V-3-200Hz 42V-3-200Hz 42V-3-200Hz

Output Current 25A 25A 25A 25A

Output Power 1,8kVA 1,8kVA 1,8kVA 1,8kVA

Noise level LpA

Output Current 11A 11A

Output Power 0,8kVA 0;8kVA

Noise level LpA

80 80 80 80

2 500 x 255 x 430 31kg IP55 ±10% -10°C to +40°C

Ambient temperature :

Type

Input Voltage

CF11M CF11M

115V-1-50Hz 230V-1-50Hz

Number of outlets : Dimensions (LxWxH) (mm) : Weight : Protection index : Primary Voltage tolerance :

Input Current 11A 7A

Output voltage 42V-3-200Hz 42V-3-200Hz

76

1 330 x 175 x 390 18kg IP55 ±10% -10°C to +40°C

Ambient temperature :

IMPORTANT The above information is a general description only, is not guaranteed and contains no warranties of any kind

BUILT-IN PROTECTIONS The CFs equipped with following protections: Thermal protections in the winding (for CF67T only); Push-button with protection against overload; Adjustable protected outlets from 10 to 18A (on CF67T CI4P only).

DESCRIPTION OF CABLE AND PROTECTIVE DEVICES When using a circuit-breaker, it must be of D curve type.

Comply with the size of protection fuses and motor circuit-breaker.

The cable type may vary according to the legislation applicable in the country. The legislation of the country will prevail against the table below.

TYPE

Primary Amps

Built-in thermal protection

cable size (H07RN-F)

CF11M

7A

7,5A

2 x 1,0mm² + Earth

CF25M

9.5A

10,0A

2 x 1,5mm² + Earth

CF25T

4.6A

5,0A

3 x 1,5mm² + Earth

CF67T

10.5

12

3 x 2,5mm² + Earth

File: 4812050294_EN_NO.doc

Page 7 / 26

Original instructions

INSTRUCTIONS MANUAL – CF

CONNECTIONS The voltage on the power terminals blocks and the cables connected to them may involve fatal electric shocks. The CF stop push-button function does not protect against this.

The CF11M and CF25M include capacitors which kept fatal voltage even after the power supply has been cut off. It is necessary to wait for 2 minutes before removing protective cover.

The CF power primary supply must be protected against overloads and short circuits, with protective devices properly sized.

Cable copper wires only to be used.

Before starting the converter, check on the data plate that converter and main values (voltage, frequency and current) are the same.

The outlets should be correctly grounded and you have to install a RCD.

COMMISSIONING Before the CF unit is powered up, check that the electrical connections are properly made and that the cooling fan is mechanically protected.

For safety matters, the CF must not be switched on with protective covers removed.

After a long period of storage, it is advisable to check the insulation between phase and the insulation between phase and earth with a 500VCC megohmmeter or with a measuring device similar.

The measured value must not be less than 10 megohms at a temperature of 100 ° C. Otherwise, it is necessary to dry the machine at 100 ° C for 24 hour s.

To avoid this kind of situation, store your converter in a dry place.

SELECTION OF A FREQUENCY CONVERTER As a rule of thumb, the total intensity of the motor in head pokers or external vibrators connected to the converter should not exceed the output converter amps capacity.

The table below has to be followed: AN28

AN40 AN48 AN65 AX56 AN56 AN90 VIBRASTAR40 VIBRASTAR50 VIBRASTAR60 AX40 AX48 AX65 1 1 X X X X 1 1 1

CF11M

1

CF25M

2

2

2

2

1

1

1

2

2

2

CF25T

2

2

2

2

1

1

1

2

2

2

CF67T

4

4

4

4

4

3

3

4

4

4

4

3

2

4

4

4

CF67T CI4P

4

4

4

4

X

X

INSTALLATION

It is of the user responsibility to ensure that the installation and the maintenance operations comply with the country official regulations related to safety of people, animals and equipment.

After connection, ensure that the seals are firmly in place, and that the screws and cable glands are watertight to ensure IP55 protection.

3

With the protected outlets, the maximum amps consumption is 18A. The nominal amps consumption of the AX65 is 19A (and 21A for AN65).

File: 4812050294_EN_NO.doc

Page 8 / 26

Original instructions

INSTRUCTIONS MANUAL – CF

OPERATION 1. Plug the converter on the main.

2. Plug the motor in head pokers or external vibrators in the CF outlets and check that their switches are on the "OFF" position.

3. Start the converter by the green push-button, the CF starts from it is released then start the motor in head pokers or the external vibrators one by one.

IT IS NOT RECOMMENDED TO START THE CONVERTER WITH THE POKERS SWITCHED ON. To stop: 1. Switch off every poker; 2. Press the red button to stop the converter.

MAINTENANCE CAUTION

Every work related to installation, commissioning and maintenance must be carried out by experienced and qualified people.

Before carrying out any work, disconnect and lock the CF power supply.

For the single phase model, wait for 2 minutes to make sure that the capacitors have not kept dangerous voltage.

The machine must be used for defined applications by qualified people.

Once a year check the machine and repair if necessary.

The user must be aware of security and operating rules about the frequency converters.

Only manufacturer authorized modifications can be made by a specialist.

CLEANING

The cooling fins and the housing must be kept clean in order to get the better cooling effect produced by the fan.

If dry concrete is located on the machine, especially in the gaps between the fins, the cooling is disturbed and the reliability of the machine can be reduced.

DO NOT CLEAN WITH HIGH PRESSURE WATER JET.

BEARINGS

The bearings are pre-lubricated and their life (L10 h) is around 5000 hours.

Change them if abnormal noise or vibrations are detected.

To change the bearings, completely dismantle the machine (this should be done by a specialist).

Take advantage of this operation to clean the whole machine.

TERMINAL BOX Before using, check that the following components are secure: Primary plug not broken and dry.

Primary cable not damaged and properly fastened to the box.

If the cable is replaced by a new one, take care that the green/yellow wire (earth wire) is longer than the power wires. This arrangement secures the machine: if strong cable strength is applied involving breaking wires, the power wires will broke at first and the earth wire will release the user primary breaker if a power wire comes in contact with the metallic part of the machine.

Push-buttons, no holes in the rubber protection.

File: 4812050294_EN_NO.doc

Page 9 / 26

Original instructions

INSTRUCTIONS MANUAL – CF

Outlets not broken and properly fastened to the box.

DISASSEMBLY – REASSEMBLY

See specific drawings on following sheets.

The DISASSEMBLY - REASSEMBLY operations have to be made by qualified people without specific tooling.

Strictly use DYNAPAC spare parts for replacement.

ELECTRIC CONNECTIONS CF67T

File: 4812050294_EN_NO.doc

Page 10 / 26

Original instructions

INSTRUCTIONS MANUAL – CF

CF67T-CI4P

File: 4812050294_EN_NO.doc

Page 11 / 26

Original instructions

INSTRUCTIONS MANUAL – CF

CF25T

CF25M AND CF11M

MEASUREMENTS The input voltage and amps can be measured using ordinary instruments.

The output voltage and amps must be measured with true root mean square instruments (TRMS).

File: 4812050294_EN_NO.doc

Page 12 / 26

Original instructions

INSTRUCTIONS MANUAL – CF

TROUBLE SHOOTING THE CONNECTED VIBRATORS DOESN’T RUN OR RUN AT LOW SPEED a) Check that the supply voltage matches with the specified voltage on the CF data plate and that the total intensity of the vibrators do not exceed the CF amps capacity. Correct if necessary. If the troubles carry on, then go to (b). b) Stop the CF by pressing the red button.

Disconnect the vibrators from the CF, then start the CF by pressing the green button.

Use a TRMS voltmeter to measure the CF output voltage from one outlet: CF type

Expected voltage (V) Min Max 46 50 CF11M 46 50 CF25M 46 50 CF25T 48 52 CF67T If the measured voltage matches with the expected values, then check and repair the faulty vibrators.

If it is not, then go to ( c ). c) Send the converter to a Dynapac repair shop.

THE CONVERTER DOESN’T START OR STARTS AND STOPS IN OPERATION a) Check according to 1(a) procedure. If the troubles carry on, then go to (b). b) Disconnect the vibrators one by one until the troubles disappear.

Then check and repair the vibrators.

If the troubles carry on with all vibrators disconnected, then go to 1(b).

File: 4812050294_EN_NO.doc

Page 13 / 26

Original instructions

SPARE PARTS CATALOGUE – CF

SPARE PARTS CATALOGUE RESERVDELSTÄLLNING

ORDERING SPARE PARTS

Följande uppgifter ska lämmas vid beställning av reservdelar för att undvika leveransfel : 1. Maskintyp.

2. Maskinens seriunmmer.

3. Antal av önskad reservdel.

4. Reserdelens artikelnummer.

5. Reservedelens benämning.

6. Måttupgifter vid beställning av metervara.

To avoid errors in delivery, please give the following information when ordering spare parts : 1. Type of machine.

2. Machine serial number.

3. Quantity required.

4. Part number.

5. Parts description.

6. Dimensions when ordering per length.

ERSATZTEILBESTELLUNG

ORDINI DI RICAMBI

Zur Vermeidung von Fehllieferungen sind bei der Bestellung von Ersatzteilen folgende Angaben zu machen : 1. Mashinentyp.

2. Herstellungsnummer.

3. Bestellmenge. (Quantity) 4. Ersatzteilbenennung. (Part N°) 5. Ersatzteilbenennung. (Description) 6. Massangaben bei Bestellung von Meterware.

Per evitare errori nelle consegne di ricambi, Vi preghiamo di comunicarci le seguenti informazioni al momento dell ‘ordinazione : 1. Tipo di macchina.

2. Numero di serie della macchina.

3. Quantitá dei pezzi desiderati. (Quantity) 4. Numero di codice del pezzo. (Part N°) 5. Descrizione del pezzo di ricambio. (Description) 6. Misura, in caso di ordine per metro.

PEDIDO DE RECAMBIOS

COMMANDE DE PIECES DE RECHANGE

Para evitar errores en las entregas, deberá indicarse los siguientes datos al hacer un pedido de recambios : 1. Tipo de máquina.

2. Número de serie.

3. Cantidad de piezas deseadas. (Quantity) 4. Número de artículo de la pieza de recambio. (Part N°) 5. Denominación de la pieza. (Description) 6. Indíquese la medida al solicitar un artículo que se expide por metros.

Les indications suivantes doivent être fournies lors de la commande de pièces de rechange, afin d’éviter toute erreur de livraison : 1. Type de machine.

2. Numéro de série.

3. Quantité désirée de pièce de rechange. (Quantity) 4. Numéro de la pièce de rechange. (Part N°) 5. Description de la pièce de rechange. (Description) 6. Longueur en cas de commande par mètre.

File: 4812050294_EN_NO.doc

Page 14 / 26

Original instructions

SPARE PARTS CATALOGUE – CF

SPARE PARTS Note : To place spare parts order, use: The serial number of the machine.

The description and the part number.

ORDER NUMBERS Designation

Input voltage

Output voltage

Order number

CF67T

400V-3-50Hz

42V-3-200Hz

4812 0502 93

CF67T

440V-3-50Hz

42V-3-200Hz

4812 0503 22

CF67T CI4P 400V-3-50Hz

42V-3-200Hz

4812 0503 23

CF67T CI4P 440V-3-50Hz

42V-3-200Hz

4812 0503 24

CF25T

400V-3-50Hz

42V-3-200Hz

4812 050 474

CF25T

440V-3-50Hz

42V-3-200Hz

4812 050 393

CF25M

230V-1-50Hz

42V-3-200Hz

4812 050 394

CF11M

230V-1-50Hz

42V-3-200Hz

4812 050 395

CF67T AND CF67T-CI4P TROLLEY CF67T Description

P/N

Qty

1

Complete frame

4700360926

1

2

Wheels

4700360927

2

File: 4812050294_EN_NO.doc

Page 15 / 26

Original instructions

SPARE PARTS CATALOGUE – CF FREQUENCY CONVERTER CF67T Description 1

P/N

Generator housing and wound stator core

Qty 1

400V-3-50Hz 4812050400 440V-3-50Hz 4812050401 2

Rotor

1 42V-3-200Hz 4812050402

3

Motor housing and wound stator core

1

400V-3-50Hz 4812050403 440V-3-50Hz 4812050404 4

Screw

4812050405

4

5

Bearing

4812050406

2

6

Washer

4812050407

1

7

Flange

4812050408

2

8

Gasket

4812050409

2

9

Fan

4812050410

2

10

Ring

4812050411

2

11

Fan cover

4812050412

2

File: 4812050294_EN_NO.doc

Page 16 / 26

Original instructions

SPARE PARTS CATALOGUE – CF

TERMINAL BOX CF67T Description

P/N

Qty

1

Terminal box housing

4812050413

1

2

Lower gasket

4812050414

1

3

Outlet

4 42V / 32A 4700927827

4

Cable

4700901025

2m

5

Plug

4700137143

1

6

Cable gland

4812050415

1

7

Nut

4812050416

1

8

Crampon

4812050417

1

9

Switch cover

4812050418

1

10

Switch

4812050419

1

11

Terminal box cover

4812050420

1

12

Upper gasket

4812050421

1

File: 4812050294_EN_NO.doc

Page 17 / 26

Original instructions

SPARE PARTS CATALOGUE – CF TERMINAL BOX CF67T-CI4P CF67T-CI4P Réf.

Désignation

P/N

Qty

1

Plug

4700137143

1

2

Cable

4700901025

2m

3

Motor breaker

4700187204

4

4

Auxiliary contact

4700187206

4

5

Stopper

4812050422

8

6

Lower gasket

4812050414

1

7

Box housing

4812050423

1

8

Outlet 42V/32A

4700927827

4

9

Cover gasket

4812050424

1

10

Cover

4812050425

1

11

Breaker lever

4700187205

4

12

Switch

4812050426

1

13

Switch cover

4812050418

1

14

Crampon

4812050417

1

15

Nut

4812050416

1

16

Cable gland

4812050415

1

File: 4812050294_EN_NO.doc

Page 18 / 26

Original instructions

SPARE PARTS CATALOGUE – CF

CF25M AND CF25T FRAME CF25 Description 1

Frame

File: 4812050294_EN_NO.doc

Page 19 / 26

P/N

Qty

4812050679

1

Original instructions

SPARE PARTS CATALOGUE – CF FREQUENCY CONVERTER CF25 CF25M P/N P/N

CF25T P/N

Réf.

Désignation

1

Threated rod

4812050680

4

4812050680

4

2

Front flange

4812050681

1

4812050681

1

3

Generator housing and wound stator core 4812050682

1 4812050683

1

4812050684

1

4812050684

1

4812050685

1 4812050686

1

230V-1-50Hz

Qty

400V-3-50Hz 4

Rotor

5

Motor housing and wound stator core 230V-1-50Hz 400V-3-50Hz

P/N

Qty

6

Bearing

4812050484

2

4812050484

2

7

Washer

4812050687

1

4812050687

1

8

Rear flange

4812050688

1

4812050688

1

9

Seal

4812050689

1

4812050689

1

10

Fan

4812050690

1

4812050690

1

11

Ring

4812050691

1

4812050691

1

12

Fan cover

4812050692

1

4812050692

1

File: 4812050294_EN_NO.doc

Page 20 / 26

Original instructions

SPARE PARTS CATALOGUE – CF TERMINAL BOX CF25 CF25M P/N Réf.

Désignation

P/N

CF25T P/N Qty

P/N

Qty

1

Terminal box cover

4812050420

1

4812050420

1

2

Upper gasket

4812050421

1

4812050421

1

3

Capacitor 40µF/450V

4812050693

1

4

Capacitor 50µF/480V

4812050694

1

5

Outlet 42V/32A

4700927827

2

4700927827

2

6

Lower gasket

4812050695

1

4812050695

1

7

Terminal box housing

4812050696

1

4812050696

1

8

Crampon

4812050697

1

4812050697

1

4812050415

1

9

Cable gland

4812050415

1

10

Cable + moulded plug

4812050698

1

10.1

Cable only

4700901024

2m

10.2

Plug

4700137143

1

11

Switch cover

4812050418

1

4812050418

1

12

Switch

4812050699

1

4812050700

1

File: 4812050294_EN_NO.doc

Page 21 / 26

Original instructions

SPARE PARTS CATALOGUE – CF

CF11M FRAME Description 1

Frame

P/N

Qty

4812050701

1

FREQUENCY CONVERTER CF11M P/N Réf.

Désignation

P/N

Qty

1

Threated rod

4812050702

4

2

Front flange

4812050681

1

3

Generator / motor housing and wound stator cores 4812050703

1

230V-1-50Hz 4

Rotor

4812050704

1

5

Bearing

4812050484

2

6

Washer

4812050687

1

7

Rear flange

4812050688

1

8

Seal

4812050689

1

9

Fan

4812050690

1

10

Ring

4812050691

1

11

Fan cover

4812050692

1

File: 4812050294_EN_NO.doc

Page 22 / 26

Original instructions

SPARE PARTS CATALOGUE – CF TERMINAL BOX CF11M P/N Réf.

Désignation

P/N

Qty

1

Terminal box cover

4812050420

1

2

Upper gasket

4812050421

1

3

Capacitor 30µF/480V

4812050705

1

4

Capacitor 22µF/450V

4812050706

1

5

Outlet 42V/32A

4700927827

2

6

Lower gasket

4812050707

1

7

Terminal box housing

4812050708

1

8

Crampon

4812050697

1

9

Cable gland

4812050415

1

10

Cable + moulded plug

4812050709

1

11

Switch cover

4812050418

1

12

Switch

4812050710

1

File: 4812050294_EN_NO.doc

Page 23 / 26

Original instructions

EO СЕРТИФИКАТ ЗА СЪОТВЕТСТВИЕ / PROHLÁŠENÍ O SHODĚ EU / EU-OVERENSSTEMMELSESRKLÆRING / CONFORMITEITSVERKLARIN EC / CERTIFICATE OF CONFORMITY EC / EUROOPA ÜHENDUSE TÜÜBIVASTAVUSE TUNNISTUS / VAATIMUSTENMUKAISUUSTODISTUS (EU) / CERTIFICAT DE CONFORMITE CE / KONFORMITÄTSBESCHEINIGUNG EG / ΠΙΣΤΟΠΟΙΗΤΙΚΟ ΣΥΜΜΟΡΦΩΣΗΣ ΕΚ / CE MEGFELELİSÉGI NYILATKOZAT / DICHIARAZIONE CE DI CONFORMITA’ / EK ATBILSTĪBAS DEKLARĀCIJA / CE SERTIFIKATAS / CERTYFIKAT ZGODNOŚCI Z NORMAMI UNII EUROPEJSKIEJ / CERTIFICADO DE CONFORMIDADE CE / CERTIFICAT DE CONFORMITATE CE / СЕРТИФИКАТ СООТВЕТСТВИЯ ЕЭС / PREHLÁSENIE O ZHODE EU / CERTIFIKAT O SKLADNOSTI CE / CERTIFICADO DE CONFORMIDAD CON LA CE / KONFORMITETSCERTIFIKAT EC / UYGUNLUK BELGESĐ AT Der Hersteller / The manufacturer / Производителят / Fabrikanten / El fabricante / Tootja / Valmistaja / Le fabricant / Ο κατασκευαστής / A gyártó / Ražotājs / Gamintojas / De fabrikant / Producent / Producatorul / Изготовитель / Výrobca / Proizvajalec / Tillverkaren / Üretici / Il Costruttore / O Fabricante / Výrobce /

VIBRATECHNIQUES

EO СЕРТИФИКАТ ЗА СЪОТВЕТСТВИЕ Route de Néville – BP36 / F-764560 Saint Valery en Caux PROHLÁŠENÍ SHODĚ / / certifica EU-que la bescheinigt, dass die Maschine / certifies that theO machine / удостоверява, че машината /EU bekræfter, at maskinen máquina / kinnitab, et antud seade / vakuuttaa, että kone / certifie que la machine / πιστοποιεί ότι η µηχανή / tanúsítja, hogy a berendezés / deklarē ka ierīce / patvirtina, kad mašina / verklaart dat de machine / zaświadcza, Ŝe urządzenie / certifica ca echipamentul / удостоверяет, что машина / prehlasuje, že tento stroj / potrjuje, da je stroj / intygar att maskinen / bu makinanın OVERENSSTEMMELSESRKLÆRING / tasdik eder./ dichiara che l’apparecchiatura / certifica que o equipamento / prohlašuje, že tento stroj CONFORMITEITSVERKLARIN EC From S/N/1001 Rotative frequency converters CF11M, CF25M, CF25T, CF67T, CF67T-CI4P Handelsname / Brand / марка / Mærke / Marca / Kaubamärk / Tuotemerkki / Marque / CERTIFICATE OF CONFORMITY EC / Εµπορικό σήµα / Márkájú / Marka / Modelis / Merk / Marki / Марка / Typ / Znamka / Märke / Marka / Denominazione commerciale / Marca / Značka-typ / е произведена, също така, в съответствие с 1. Hergestellt wurde unter Beachtung und Einhaltung der EUROOPA ÜHENDUSE Машината TÜÜBIVASTAVUSE ЕВРОПЕЙСКИ ДИРЕКТИВИ 2006/95, 2004/108, 2002/95 и EUROPA-VERORDNUNG 2006/42/EG. 2002/96, ако е от електрически тип.

Is manufactured in conformity with the EUROPEAN Det er også fremstillet i overensstemmelse med EUDIRECTIVE 2006/42/EC. TUNNISTUS / hvis DIREKTIVERNE 2006/95, 2004/108, 2002/95 & 2002/96, произведена в съответствие с ЕВРОПЕЙСКА ДИРЕКТИВА det er elektrisk.

2006/42/CE. Está fabricada asimismo en conformidad con la DIRECTIVA Er fremstillet i overensstemmelse med EUDIREKTIVET VAATIMUSTENMUKAISUUSTODISTUS EUROPEA 2006/95, 2004/108, 2002/95 & 2002/96, si es de 2006/42/EC tipo eléctrico.

Ha sido fabricada en conformidad con la DIRECTIVA tegemist on elektrilise seadmega, vastab selle EUROPEA 2006/42/EC. / CERTIFICAT DEKui CONFORMITE CE 2006/95, / valmistamine ka Euroopa Ühenduse direktiividele On (EU) valmistatud vastavuses Euroopa Ühenduse direktiiviga 2004/108, 2002/95 ja 2002/96.

2006/42/EÜ.

On valmistettu EU-DIREKTIIVIEN 2006/95, 2004/108, 2002/95 On valmistettu EU-DIREKTIIVIN 2006/42/EY mukaisesti.

EG kone. / & 2002/96 mukaisesti, jos kyseessä on sähkötoiminen EstKONFORMITÄTSBESCHEINIGUNG fabriquée conformément à la DIRECTIVE EUROPEENNE Est également fabriquée conformément à la DIRECTIVE 2006/42/CE. EUROPEENNE 2006/95, 2004/108, 2002/95 & 2002/96, si elle Κατασκευάζεται σύµφωνα µε την ΕΥΡΩΠΑΪΚΗ Ο∆ΗΓΙΑ ΠΙΣΤΟΠΟΙΗΤΙΚΟ ΣΥΜΜΟΡΦΩΣΗΣ ΕΚ / CE est de type électrique.

2006/42/EC. Κατασκευάζεται επίσης σύµφωνα µε την ΕΥΡΩΠΑΪΚΗ Ο∆ΗΓΙΑ Megfelel a 2006/42/EK európai irányelv rendelkezéseinek.

2006/95, 2004/108, την 2002/95 & την 2002/96, εάν είναι Ir ražota saskaĦā ar Eiropas Direktīvu 2006/42/EC. MEGFELELİSÉGI NYILATKOZAT / ηλεκτρικού τύπου.

Pagaminta pagal Europos direktyvas 2006/42/EC Megfelel továbbá a 2006/95, 2004/108, 2002/95 és 2002/96 Is vervaardigd in overeenstemming met de Europese richtlijn IRÁNYELVEKNEK, amennyiben elektromos 2006/42/EG. CE DIEURÓPAI CONFORMITA’ / EK berendezésrıl van szó.

JestDICHIARAZIONE produkowane zgodnie z wymaganiami EUROPEJSKIEJ Ir arī ražota saskaĦā ar Eiropas Direktīviem 2006/95, 2004/108, DYREKTYWY 2006/42/EC. 2002/95 & 2002/96, ja tā ir elektriska.

Este produs in conformitate cu DIRECTIVA EUROPEANA ATBILSTĪBAS DEKLARĀCIJA Taip pat atitinka Europos direktyvas /2006/95,CE 2004/95 ir 2006/42/EC. 2002/95, tik elektriniams prietaisams Произведена в соответствии с ЕВРОПЕЙСКОЙ is vervaardigd in overeenstemming met de Europese ДИРЕКТИВОЙ 2006/42/EC. / Ook CERTYFIKAT richtlijn 2006/95, 2004/108, 2002/95 en 2002/96, indien het een Je SERTIFIKATAS vyrobený v súlade v zhode s Európskou smernicou elektrisch type is.

2006/42/EC. Jest takŜe produkowane zgodnie z wymaganiami Izdelan v skladu z EVROPSKO DIREKTIVO 2006/42/CE. Z NORMAMI UNII EUROPEJSKICH DYREKTYW 2006/95, 2004/108, 2002/95 Är ZGODNOŚCI tillverkad i överensstämmelse med det EUROPEISKA oraz 2002/96, jeŜeli jest urządzenie zasilane prądem DIREKTIVET 2006/42/EC. elektrycznym.

AVRUPA DĐREKTĐFĐ 2006/42/EC ’ye uygun imal edildiğini, / CERTIFICADO Este de asemenea produs in conformitate cu DE DIRECTIVA è EUROPEJSKIEJ conforme alle disposizioni della Direttiva 2006/42/CE EUROPEANA 2006/95, 2004/108, 2002/95 & 2002/96, in cazul (Direttiva Macchine); care este de natura electrica.

Fabricado em conformidade com as DIRECTIVAS CONFORMIDADE CE inТакже / CERTIFICAT DE произведена в соответствии с ЕВРОПЕЙСКИМИ EUROPEIAS 2006/42/EC. ДИРЕКТИВАМИ 2006/95, 2004/108, 2002/95 & 2002/96, если Je vyroben ve shodě s EVROPSKÝM NAŘÍZENÍM 2006/42 EC. это электрическое оборудование. zhode s Európskou smernicou 2006/95, CONFORMITATE 2. Sofern es sich um ein elektrisches Gerät handelt, ist auchCEJe taktiež /vyrobený v СЕРТИФИКАТ 2004/108, 2002/95 a 2002/96, ak ide o elektrický typ stroja. die EUROPA-VERORDNUNG 2006/95, 2004/108, 2002/95 & Prav tako je izdelan v skladu z EVROPSKO DIREKTIVO 2002/96 entsprechend beachtet und eingehalten worden.

2006/95, 2004/108, 2002/95 & 2002/96, če je električnega ЕЭС / PREHLÁSENIE Otipa.

Is СООТВЕТСТВИЯ also manufactured in conformity with the EUROPEAN DIRECTIVE 2006/95, 2004/108, 2002/95 & 2002/96, if it is of an electric type.

ZHODE EU / CERTIFIKAT O SKLADNOSTI CE / CERTIFICADO DE CONFORMIDAD

Επίσης συµµορφώνεται µε τα ΕΥΡΩΠΑΪΚΑ ΠΡΟΤΥΠΑ LIEFERANTENERKLÄRUNG EG / EN12100-1, EN12100-2, EN60034-1, EN60204-1, EN61558-1.

Megfelel továbbá az EN12100-1, EN12100-2, EN60034-1, EN60204-1, EN61558-1 EURÓPAI EC SZABVÁNYBAN DECLARATION OF INCORPORATION / foglaltaknak.

Ari atbilst Eiropas standartu EN12100-1, EN12100-2, EN60204-1, EN61558-1. ЕО ДЕКЛАРАЦИЯ ЗА EN60034-1, РЕГИСТРИРАНЕ / Taip pat atitinka Europos standartus EN12100-1, EN12100-2, EN60034-1, EN60204-1, EN61558-1.

Ook voldoet aan de Europese norm EN12100-1, EN12100-2, BESTEMMELSE OM EF-INKORPORATION / EN60034-1, EN60204-1, EN61558-1.

Jest takŜe zgodne z EUROPEJSKĄ NORMĄ EN12100-1, EN12100-2, EN60034-1, EN60204-1, EN61558-1.

DECLARACION DE INCORPORACION A LA Este de asemenea conform cu STANDARDUL EUROPEAN EN12100-1, EN12100-2, EN60034-1, EN60204-1, EN61558-1.

3. Die EUROPA STANDARD EN12100-1, EN12100-2, Также отвечает ЕВРОПЕЙСКИМ СТАНДАРТАМ EN12100-1, EN60034-1, EN60204-1, EN61558-1 wurden beachtet und CE / EUROOPA ÜHENDUSE EN12100-2, EN60034-1, EN60204-1, EN61558-1. eingehalten.

Tiež vyhovuje Európskemu štandardu EN12100-1, EN12100Also complies with the EUROPEAN STANDARD EN12100-1, 2, EN60034-1, EN60204-1, EN61558-1.

EN12100-2, EN60034-1, EN60204-1, EN61558-1.

VASTAVUSDEKLARATSIOON / VAKUUTUS Prav tako je skladen z EVROPSKO NORMO EN12100-1, Машината е произведена също така в съответствие с EN12100-2, EN60034-1, EN60204-1, EN61558-1. ЕВРОПЕЙСКИ СТАНДАРТ EN12100-1, EN12100-2, Uppfyller den dessutom också den EUROPEISKA EN60034-1, EN60204-1, EN61558-1.

EU-NORMIEN TÄYTTÄMISESTÄ / STANDARDEN EN12100-1, EN12100-2, EN12649, EN60034Det er også i overensstemmelse med EU-STANDARDEN 1, EN60204-1, EN61558-1.

EN12100-1, EN12100-2, EN60034-1, EN60204-1, EN61558-1.

Ayrıca AVRUPA STANDARDI EN12100-1, EN12100-2, Cumple con la NORMA EUROPEA EN12100-1, EN12100-2, DECLARATION D’INCORPORATION CE / EN60034-1, EN60204-1, EN61558-1 ‘e uyumlu olduğunu, EN60034-1, EN60204-1, EN61558-1.

Sono state applicate le norme armonizzate EN12100-1, Vastab masin ka Euroopa standardile EN12100-1, EN12100-2, EN12100-2, EN12649, EN60034-1, EN60204-1, EN61558-1.

EN60034-1, EN60204-1, EN61558-1. ∆ΗΛΩΣΗ ΤΗΣ ΕΝΣΩΜΑΤΩΣΗΣ ΕΚ / Também de acordo com as normas EUROPEIAS STANDARD Täyttää EU-STANDARDIN EN12100-1, EN12100-2, EN60034EN12100-1, EN12100-2, EN60034-1, EN60204-1, EN61558-1.

1, EN60204-1, EN61558-1 vaatimukset.

Také splňuje EVROPSKÝ STANDARD EN12100-1, EN12100Est également conforme à la NORME EUROPEENNE BEÉPÍTÉSI NYILATKOZAT / EK 2, EN60034-1, EN60204-1, EN61558-1.

EN12100-1, EN12100-2, EN60034-1, EN60204-1, EN61558-1.

4. Name und Adresse der Person, die im Besitz INCORPORATION der technischen Dokumentation ist / Name and DEKLARĀCIJA / CE address of person who owns technical information / Име и адрес на лицето, разполагащо с техническите документи. / Navn og adresse på den person, der ejer de tekniske oplysninger. / Nombre y dirección de la persona que posee información técnica. / Tehnilist dokumentatsiooni DEKLARACIJA / laEG INBOUWVERKLARING omava isiku nimi ja aadress. / Teknisten tietojen omistajan nimi ja osoite. / Nom et adresse de la personne possédant les informations techniques. / Όνοµα και διεύθυνση του προσώπου που είναι Jean-Rémy CHASSE των τεχνικών πληροφοριών. / A mőszaki információkkal rendelkezı személy neve és címe. / / κύριου CERTYFIKAT ZGODNOŚCI EC / Vibratechniques Vārds un adrese personai, kura ir tehniskās informācijas īpašnieks. / Už techninę informaciją atsakingo F-76460 Saint Valery žmogaus vardas ir adresas / Naam en adres van de persoon die eigenaar is van technische informatie. en Caux / Imię i nazwisko oraz adres osoby, która posiada informacje techniczne. / Numele si adresa persoanei DECLARATIE DE CONFORMITATE CE / care detine informatiile tehnice. / Фамилия и имя обладателя технической информации. / Meno a adresa osoby, ktorá vlastní technické informácie / Ime in naslov osebe, ki ima tehnične informacije. / Namn och adress av personen som äger teknisk information. / Teknik dökümanın sahibinin isim ve ДЕКЛАРАЦИЯ ОБЪЕДИНЕНИЯ ЕЭС / adresi. / Nome e recapito del proprietario delle informazioni tecniche / Nome e morada do Cliente / Jméno a adresa osoby, která vlastní technickou dokumentaci / DEKLARÁCIA EU / Ort / Place / Изготвено в / Sted / Lugar / Asukoht ZAČLENENIA / Paikka / Fait à / Τόπος / Kelt / Vieta / Plaatsen Saint Valéry en Caux / Miejsce / Localitatea / Местоположение / Miesto / Napisano v / Luogo / Localidade / Místo Datum / Date / Дата / Dato / Fecha / Kuupäev / Päivämäärä / Date / Ηµεροµηνία / Dátum / 15/03/2009 / DEKLARACIJA O VKLJUČITVI CE Datums / Data / Дата / Dátum / Yer / Data / INBYGGNADSDEKLARATION / ÜRETĐCĐ Unterschrift / Signature / Подпис / Underskrift / Firma / Allkiri / Allekirjoitus / SignaturaEC / Υπογραφή / Aláírás / Paraksts / Parašas / Handtekening / Podpis / Semnatura / Подпись / Signatur / Đmza / Firma / Assinatura / Pascal Courroux BEYANI AT / LIEFERANTENERKLÄRUNG Plant Manager EG / DECLARATION OF INCORPORATION EC / ЕО ДЕКЛАРАЦИЯ ЗА РЕГИСТРИРАНЕ / BESTEMMELSE OM EFINKORPORATION / DECLARACION DE INCORPORACION A LA CE / EUROOPA Om den är av elektrisk typ, är den även tillverkad i överensstämmelse med de EUROPEISKA DIREKTIVEN 2006/95, 2004/108, 2002/95 & 2002/96.

Ayrıca, bir elektrikli ürün ise, AVRUPA DĐREKTĐFĐ 2006/95, 2004/108, 2002/95 ve 2002/96 ’ye uygun imal edildiğini, se l’apparecchiatura è elettrica, è altresì conforme alle Direttive Europee 2006/95, 2004/108, 2002/95 & 2002/96; Também fabricado em conformidade com as DIRECTIVAS EUROPEIAS 2006/95, 2004/108, 2002/95 & 2002/96, se são do tipo eléctrico.

Je současně vyroben ve shodě s EVROPSKÝM NAŘÍZENÍM 2006/95, 2004/108, 2002/95 & 2002/96 CE, jestliže se jedná o elektrický typ stroje.

Atlas Copco Construction Tools AB 105 23 Stockholm Sweden We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.

www.dynapac.com