DOWNLOAD PDF Iseki TH4260 TH4290 TH4330 Tractor Parts Manual (1740-097-110-00)
Directions for use of Parts Catalogue
1. Applicable model of machines
All component and option parts used for TH4260,TH4290,TH4330 tractors are listed in this parts catalogue.
1) MODEL TYPE
2) AREA CODE E4
FRONT/REAR HITCH & ROPS
2. Explanation for head paragraph
① KEY shows the location of parts diagramed in the illustration.
② Parts numbers begin with `V´ and W ´ are standard parts of the market.
③｀LH ´ and ｀ RH ´ on the parts name are described against the moving direction of the machine or are described on the condition how to install parts on the machines.
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
• Thank you very much for reading the preview of the manual.
• You can download the complete manual from: www.heydownloads.com by clicking the link below
• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.
CLICK HERE TO DOWNLOAD THE
④ SPC : The following symbol classifies parts to be used for machines.
* ´ means standard parts.
｀ T ´ shows that the parts can be installed as optional parts.
R ´ shows that the parts can be used as applicable parts to replace originally equipped parts.
⑤ Upper column : QTY shows the number of parts to be used for one unit of machine.
M ´ is indicated for parts supplied by a meter long.
｀ｌ´ is indicated for parts supplied by liter.
｀ AR´ is indicated for parts need to be adjusted or regulated.
Lower column : serial number
229 means serial number up to 229.
230 means serial number 230 and after.
⑥ ITC : Interchangeability
｀ 1´…OLD ← NEW
New parts can be used in place of the old parts.
2´…OLD → NEW
Old parts can be used in place of the new parts.
｀
3´…OLD →← NEW
Old parts and new parts can not be replaced each other.
⑦ COL : Color code
Color is signified with color code number for colored parts.
Please see the color list shown in the next page.
⑧ GRP : Parts shown in this column can be replaced by SET parts.
Example : Parts marked ○ A can be replaced by parts marked ○ B , and ○ D for ○ C , so the rest follow in the same alphabetical order.
⑨ Remarks
＊ Other maker's part code number is shown in this column.
＊ When Fig. No. is shown in the Remark column of SET parts or ASSY parts, each of their component parts are listed in said Fig. No.
3. Color :
The following colors are used color parts.
NOTE : Color code is signified only for the parts assigned by the maker as color parts.
4. Serial Numbers :
1) For engines serial number is stamped on CYLINDER BLOCK ASSY.
Please see Fig. No. 5 1
2) For chassies serial number is shown on the LABEL.
Please see
5. Parts Order
1) Parts numbers listed in the parts catalogue are all registered in “ISEKI on-line computer” .
2) When you order parts, please make sure of correct numbers.
3) When substitute parts is available, the part number ordered will be automatically turned to a new part number.
4) Please be sure to use “ISEKI GENUINE PARTS” .
Any other similar parts other than ISEKI parts when used may cause a trouble that makes us unable to repair or guarantee the warrant.
*** Structure Table of Model ***
*** Structure Table of Model ***
*** Structure Table of Model ***
2DMM2HH2DMM2HH3HH
6RDD6MM9RDD9MM3MM
Structure Table of Model ***
4FFF4FF4FFF4FF4FF
2DMM2HH2DMM2HH3HH
6RDD6MM9RDD9MM3MM
0EER0ER0EER0ER0ER 44EH4E 44EH4EH4E 4 4 4 4 4
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
• Thank you very much for reading the preview of the manual.
• You can download the complete manual from: www.heydownloads.com by clicking the link below
• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.
(POSITION) SYSTEMFig. 78 LEVER (POSITION),COVER (VALVE) SYSTEMFig. 79 ......................................................... PIPING SYSTEM (H TYPE)(1/2)(2/2)Fig. 80 PIPING SYSTEM (EXCEPT H TYPE)(1/2)(2/2)Fig. 81 .............................................................
(3P) SYSTEM (H TYPE)Fig. 82 ........................................................................................
(EXCEPT
(FRONT) SYSTEM (H TYPE)Fig.
MOUNT (FRONT) SYSTEM (EXCEPT H TYPE)Fig. 96 .......................................................... MOUNT (REAR/H TYPE), STEP (SUB/OPTION) SYSTEMFig. 97 ..................................................................................
(REAR) SYSTEM (EXCEPT H TYPE)Fig. 98 FLOOR SYSTEM (H TYPE)Fig. 99 ............................................................................................ FLOOR SYSTEM (EXCEPT H TYPE)Fig.100 ............................................................................
LAMP SYSTEMFig.101 LAMP SYSTEM (H TYPE)Fig.102 .............................................................................................. LAMP SYSTEM (EXCEPT H TYPE)Fig.103
PANEL SYSTEMFig.104
SWITCH SYSTEM (H TYPE)Fig.105 ..........................................................................................
SWITCH SYSTEM (EXCEPT H TYPE)Fig.106
HARNESS SYSTEM (TH4260-H TYPE)Fig.107 ........................................................................
HARNESS SYSTEM (TH4290,4330-H TYPE)Fig.108
HARNESS SYSTEM
(TH4260-EXCEPT H TYPE)Fig.109 ........................................................................................
HARNESS SYSTEM
(TH4290-EXCEPT H TYPE)Fig.110 ........................................................................................
REAR WHEEL (12.4-16) SYSTEM (EXCEPT H TYPE) (OPTION)Fig.117 ....................................................................................
REAR WHEEL (TURF/OVER SIZE) SYSTEM (EXCEPT H TYPE) (OPTION)Fig.118 ....................................................................................
REAR WHEEL (9.5-24) SYSTEM (EXCEPT H TYPE) (OPTION)Fig.119
REAR WHEEL (TURF) SYSTEM (OPTION)Fig.120 .................................................................
REAR WHEEL (9.5-22) SYSTEM (OPTION)Fig.121
BUMPER SYSTEM (EXCEPT H TYPE/TH4260,4290-HR TYPE) (OPTION)Fig.122
HITCH (FRONT) SET (EXCEPT R TYPE) (OPTION)Fig.123 ....................................................................................
FRONT WHEEL SYSTEM (OPTION)Fig.124
FRONT WHEEL (TURF/9.75I-12) SYSTEM (EXCEPT H TYPE) (OPTION)Fig.125
FRONT WHEEL (TURF) SYSTEM (OPTION)Fig.126
FRONT WHEEL SYSTEM (EXCEPT H TYPE) (OPTION)Fig.127
VALVE (STACK/R1) SET (OPTION)Fig.128 ..............................................................................
VALVE (STACK/R2) SET (OPTION)Fig.129
HITCH (DRAW BAR) SET (H TYPE) (OPTION)Fig.130 ...........................................................
HITCH (TRAILER) SET (EXCEPT H TYPE) (OPTION)Fig.131 ....................................................................................
CREVICE (DRAW BAR) SYSTEM (OPTION)Fig.132 ...............................................................
DRAFT SET (OPTION)Fig.133
COMPONENT PARTS
COMPONENT PARTS
FOR K177-006-000-50 ON Fig.62,63Fig.134 ..........................................................................
COMPONENT PARTS
FOR K256-001-000-00 ON Fig.62Fig.135
COMPONENT PARTS
FOR K275-001-000-00 ON Fig.80Fig.136
COMPONENT PARTS
FOR 1588-105-220-00 ON Fig.4,5Fig.137
COMPONENT PARTS
FOR 1640-530-600-10 ON Fig.128,129Fig.138 .......................................................................
COMPONENT PARTS
FOR 1709-121-310-00 ON Fig.13Fig.139 ................................................................................ COMPONENT PARTS
FOR 1740-128-500-00 ON Fig.15Fig.140 ................................................................................
COMPONENT PARTS
FOR 1740-202-500-00 ON Fig.19Fig.141 ................................................................................
WIRING DIAGRAM (TH4260)
WIRING DIAGRAM (TH4260) (HST)
WIRING DIAGRAM (TH4290)
WIRING DIAGRAM (TH4290,4330) (HST)
6005-101H-0100,6005-101H-0200
FIG. 1 CYLINDER HEAD
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
• Thank you very much for reading the preview of the manual.
• You can download the complete manual from: www.heydownloads.com by clicking the link below
• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.
