Ditch Witch SK350 Parts Manual PN 053-149 - PDF DOWNLOAD

SK350 Kohler® CH20

Parts Manual

Issue 20

053-149

1

SK350

ISSUE NO. 20PL-07/23 For Replacement Copy Order P/N 053-149

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works .

This manual contains information concerning the following models: SK350

Copyright 2005, 2006, 2007, 2008, 2011, 2013, 2014, 2015, 2017, 2018, 2023 by The Charles Machine Works, Inc. , Ditch Witch, AutoCrowd, Jet Trac, Roto Witch, Subsite, Fluid Miser, Power Pipe, Super Witch, Pierce Arrow, Zahn, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY _________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy August, 2016

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY • All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse, abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 06

ID0134872

CONTENTS______________________ Decals

Decal Location – SK350 ....................... 8

Engine Components

Engine Installation..................... 12, 14

Frame Components

Battery ............................................ 52 Belt Drive ........................................ 24 Bolt-On Tooth ................................. 72 Brake Installation ............................ 26 Front Idler ........................... 64, 66, 68 Fuel Tank ............................. 18, 20, 22 Hood ............................................... 28 Hydraulic Tank .................... 42, 44, 46 Hyd. Tank & Grill Installation .... 48, 50 Idler Roller....................................... 70 Lift Arm Installation......................... 40 Lift Arms .................................... 36, 38 Operator Console ............................ 34 Platform .......................................... 32 Rear Cover and Side Panels ............. 30 Track Frame .................. 54, 56, 58, 60 Track Frame Installation.................. 62

Lift Cylinder Hydraulics ................... 92 Pump Inlet Hydraulics ................ 76-82 Return Hydraulics ................. 102, 104 Tilt Cylinder Hydraulics ................... 94

Electrical

*See technical supplement for further electrical information.................... #053-153

Miscellaneous

Filters ............................................ 134 Optional Kits ................................. 134 Related Publications ..................... 134 Replacement O-Ring Chart ........... 133 Torque Information ...................... 128 Warranty Registration .................. 136

Hydraulics

Auxiliary Hydraulics ....... 84, 86, 88, 90 Case Drain ....................................... 98 Component Mounting................... 116 Controls ......................................... 100 Cooler Installation ......... 110, 112, 114 Cylinder – 2.5”x1.25” ........................ 120 Cylinder – 2.5x1.25x10 ...................... 122 Cylinder – 2”x1.25” .......................... 118 Gear Pump Hydraulics........... 106, 108 Ground Drive Hydraulics ................. 96 ID0135036

5

6

7

DECALS

ID0135069

8

DECAL LOCATION SK350

2 8 6

12 22

10

21

19

3 13 15

9 4 1 17 16 11 12

15

5

14

12

7

23

11

18

15 16 15

17 20 12 11 1 24

06

ID0096434

9

DECAL LOCATION SK350 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

275-997 273-413 274-291 273-420 700-202 273-423 273-646 700-248 273-644 273-616 273-475 274-318 274-442 274-854 275-120 275-184 275-326 700-093 700-133 275-024 275-355 275-419 273-482 270-1023 273-617 273-267 270-6406

QTY

DESCRIPTION

2 1 1 2 1 1 1 1 1 1 4 4 1 1 4 2 2 1 1 1 1 1 1 1 1 1

DECAL KIT - SK350 WARNING SECURE CYLINDER SOUND POWER 10 UNLEADED GASOLINE ONLY LOCK/UNLOCK CAUTION HOT PARTS SK350 LUBRICATION CHART SK350 CONTROL PANEL SK350 OPERATORS INSTRUCTIONS SK350 RT MODEL ID WARNING READ OPERATOR MANUAL TIE DOWN LOCATION LIFT LOCATION LOGO PLACARD RESERVOIR (THF) WARNING MOVING PARTS WARNING CRUSHING WEIGHT DITCH WITCH LOGOTYPE WARNING ONE CALL NOTIFICATION PARKING BRAKE CAUTION HOT PARTS WARNING NO FLAME IGNITION SWITCH HYDRAULIC OIL LEVEL SK350 LT MODEL ID DITCH WITCH BATTERY OPERATOR MANUAL REPLACEMENT

REMARKS

SEE FOOT NOTE 1

SEE FOOT NOTE 2 APPLY INSIDE MANUAL BOX

FOOTNOTES

1. NOT PART OF KIT. 2. LOCATE DECAL ON BATTERY SO THAT DECAL IS VISIBLE WHEN VIEWING BATTERY.

06

ID0096434

10

NOTES:

ID0134963

11

ENGINE COMPONENTS

ID0134845

12

ENGINE INSTALLATION

BEGINS WITH S/N: CMWSK350AB001151

5

10 8

11 7 9 3

2

1 4

03

6

ID0273502

13

ENGINE INSTALLATION

BEGINS WITH S/N: CMWSK350AB001151 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11

195-1600 194-660 118-363 106-162 106-200 106-386 106-383 107-661 110-134 177-052 106-396

QTY

1 1 1 2 4 4 2 2 2 1 4

DESCRIPTION

ENGINE (KOHLER CH20 20 HP, EL) MUFFLER AIR INTAKE HOSE FLG SCREW (M8-1.25 X 20MM, GD8) FLG LK SCREW (M8-1.25 X 45MM) FLG LOCKNUT (M8-1.25) FLG LK SCREW (M10-1.50 X 30MM) FLG LKNUT (M10-1.50, PRV TRQ) WORM CLAMP (2.062" TO 2.750") AIR TUBE WASHER (M10, HARDENED)

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. SERVICE PARTS; 157-630 OIL FILTER, 194-669 FUEL FILTER, 194-648 PRIMARY AIR FILTER AND 194-649 SECONDARY AIR FILTER 2. 194-863 SPARK ARRESTER (OPTIONAL)

NOTE:

03

ID0273502

14

ENGINE INSTALLATION

ENDS WITH S/N: CMWSK350VB0001150

5

11

1

4 8 2

7 3

10

9

6 09

ID0035391

15

ENGINE INSTALLATION

ENDS WITH S/N: CMWSK350VB0001150 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11

194-660 194-571 118-363 106-162 106-200 106-386 106-383 107-661 110-134 177-052 106-396

QTY

DESCRIPTION

1 MUFFLER 1 ENGINE (20.0 HP KOHLER, ELECT) 1 AIR INTAKE HOSE 2 FLG SCREW (M8-1.25 X 20MM, GD8) 4 FLG LK SCREW (M8-1.25 X 45MM) 4 FLG LOCKNUT (M8-1.25) 2 FLG LK SCREW (M10-1.50 X 30MM) 2 FLG LKNUT (M10-1.50, PRV TRQ) 2 WORM CLAMP (2.062" TO 2.750") 1 AIR TUBE 4 WASHER (M10, HARDENED)

REMARKS

SEE FOOTNOTE 2 SEE FOOTNOTE 1 FOR SERVICE PARTS.

NOT SHOWN:

FOOTNOTES:

1. SERVICE PARTS: 157-630 OIL FILTER, AND 194-669 FUEL FILTER, AND 194-648 PRIMARY AIR FILTER, AND 194-649 SECONDARY AIR FILTER KOHLER SERVICE PART NO'S, PUMP DRIVE 82-755-02S, GREASE 25-35712S, SPLNE KIT 500-2128 2. 165-835 QTY 2 MUFFLER GASKET. 194-863 SPARK ARRESTER (OPTIONAL)

NOTE:

09

ID0035391

16

NOTES:

ID0134963

17

FRAME COMPONENTS

ID0135068

18

FUEL TANK

SK350 BEGINS WITH S/N: CMWSK350AB0001151

25

16 23

28 7

21 13 15 20 18

5 4

6 3 1

9 19 2 17

13

11

26 10 14

8

22

24 12 13

09

27

ID0273453

19

FUEL TANK

SK350 BEGINS WITH S/N: CMWSK350AB0001151 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

1 ENGINE (KOHLER CH20 20 HP, EL) 1 SUPPORT BRACKET 1 FUEL TANK 1 FLAP (FUEL TANK) 1 MOUNT BRACKET 1 SPACER 1 SCREW (M10-1.50 X 200MM) 2 FLG LKNUT (M10-1.50, PRV TRQ) 1 S/O COUPLER (04H90-05H90) 1 ABRASION SLEEVE (1" X 12") 24 BULK FUEL TUBING (1/4",PER FT) 1 FUEL FILTER (04H-04H, IN-LINE) 6 WORM CLAMP (1/4" TO 5/8") 2 BOLT-ON CLAMP (13/16") 35 BULK HOSE (3/16") LOW PERM 1 LANYARD CABLE (13.5") 2 FLG LK SCREW (M10-1.50 X 30MM) 1 GROMMET 1 GROMMET (.362") 1 SLOSH VALVE 1 FUEL CAP COVER BASE 1 FUEL PICKUP 1 FUEL CAP COVER 1 PLUG (04N, SOC, SS) 2 POP RIVET (3/16" X .664") 24 BULK HOSE (5/16") LOW PERM 38 BULK HOSE (1/4") LOW PERM 1 FUEL CAP (RATCHET 3.50") w/CV

195-1600 325-260 362-1477 118-476 301-1950 177-251 108-230 107-661 159-966 117-671 118-096 194-669 110-249 110-373 105-1516 110-239 106-383 105-1557 116-325 362-1530 362-1176 194-505 362-1175 115-444 110-348 105-1518 105-1517 362-2263

DESCRIPTION

REMARKS

INCL'S REF NO. 12, SEE FOOTNOTE 1 & NOT SHOWN FOR SERVICE PARTS SEE NOT SHOWN

1 @ 35"

NOT SHOWN:

500-1584 500-2128 194-648 194-669 157-630 194-649

REPLACEMENT BULKHEAD FITTING SPLINE KIT AIR FILTER, PRIMARY FUEL FILTER OIL FILTER AIR FILTER, SECONDARY

FOOTNOTES:

1. USE UPTIME SK350 KOHLER KIT 190-1762. INCLUDES: 157-630, 194-648, 194-669, 194-649, 155-910 & 195-1239.

NOTE:

09

ID0273453

20

FUEL TANK

SK350; BEGINS WITH S/N: A60000443 ENDS WITH S/N:

24 17

16

18 15

5

7 19

6

4

3

1 9 2

20

23

22

25

10 8

21 25

26 13 12

8 14

11 13

10

ID0148000

21

FUEL TANK

SK350; BEGINS WITH S/N: A60000443 ENDS WITH S/N: REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

QTY

DESCRIPTION

194-571 1 ENGINE (20.0 HP KOHLER, ELECT) 325-260 1 SUPPORT BRACKET 362-1040 1 FUEL TANK - SK-350 118-476 1 FLAP 325-259 1 MOUNTING BRACKET 177-251 1 SPACER 108-230 1 SCREW (M10-1.50 X 200MM) 107-661 2 FLG LKNUT (M10-1.50, PRV TRQ) 159-966 1 S/O COUPLER (04H90-05H90) 117-671 1 ABRASION SLEEVE (1" X 12") 105-1517 1 BULK HOSE 1/4" LOW PERM 194-669 1 FUEL FILTER (04H-04H, IN-LINE) 110-249 4 WORM CLAMP (1/4" TO 5/8") 110-373 2 BOLT-ON CLAMP (13/16") 300-1505 1 FUEL CAP GUARD LOCK 108-220 1 SLAB BASE WELD NUT (M8-1.25) 105-805 1 WASHER BELLEVILLE (3/8) 107-095 1 FLG SCREW (M8-1.25 X 16MM) 110-368 1 SNAPPER PIN (3/8" X 1-1/2") 118-096 1 BULK FUEL TUBING (1/4",PER FT) 105-1517 1 BULK HOSE (1/4") LOW PERM 194-505 1 FUEL PICKUP 116-325 1 GROMMET (.362") 364-698 1 FUEL CAP 106-383 1 FLG LK SCREW (M10-1.50 X 30MM) 115-444 1 PLUG (04N, SOC, SS)

REMARKS

INCLUDES REF NO. 12 SEE NOT SHOWN

USE 1 @ 38"

USE 1@ 24" USE 1 @ 13"

NOT SHOWN:

500-1584

REPLACEMENT BULKHEAD FITTING

FOOTNOTES:

NOTE:

10

ID0148000

22

FUEL TANK

ENDS WITH S/N

6 11

3

2

8

14 7 12

4 8

6

13 5

14 10 14 9 14 1 1

04

ID0035773

23

FUEL TANK

ENDS WITH S/N REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

110-373 159-966 116-325 118-096 156-268 106-382 115-381 110-563 115-381 194-669 364-701 194-571 117-671 110-249

QTY

2 1 1 1 1 3 1 2 1 1 1 1 1 4

DESCRIPTION

BOLT-ON CLAMP (13/16") S/O COUPLER (04H90-05H90) GROMMET (.362") BULK FUEL TUBING (1/4",PER FT) FUEL STRAINER (04H) FLG LK SCREW (M10-1.50 X 20MM) BULK HOSE (1/4", SOLD PER 1") SPRING CLAMP (3/8") BULK HOSE (1/4", SOLD PER 1") FUEL FILTER (04H-04H, IN-LINE) FUEL TANK ENGINE (20.0 HP KOHLER, ELECT) ABRASION SLEEVE (1" X 12") WORM CLAMP (1/4" TO 5/8")

REMARKS

USE 1 @ 24" USE 1 @ 13" USE 1 @ 38" SEE FOOTNOTE 1 INCL REF NO. 10

NOT SHOWN:

FOOTNOTES:

1. SERVICE PARTS: 111-065 FUEL CAP LOCKING, VENTED

NOTE:

04

ID0035773

24

BELT DRIVE

1 3 1

3

2 6 7

8

2

5

4 12

9 11 10

13

03

ID0035405

25

BELT DRIVE REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13

105-701 166-530 170-456 105-874 170-469 325-207 106-857 107-769 106-206 170-457 165-923 108-097 170-459

QTY

6 2 2 1 1 1 1 1 1 1 1 4 1

DESCRIPTION

SET SCREW (5/16-NC X 3/8",CUP) KEY PULLEY (15MM, 5MM KWY-BORE) FLG LK BOLT(3/8-NCX1-1/2") LO IDLER SHEAVE, 5" TENSIONER SCREW (M10-1.50 X 55MM, SOC) JAM NUT (M10-1.50) SCREW (M10-1.50 X 90MM) PULLEY (1.00", .25 KWY-BORE) KEY (1/4 X 2.00) SET SCR 3/8-NC X 1.00" CUP, NYL BELT (A-SECTION, 73", KEV)

REMARKS

USE LOCTITE 680 uSE LOCTITE 680

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0035405

26

BRAKE INSTALLATION 12 15

2 5

14 11

6 10

4 3 13

8 7

9

1

A

809-738

27

BRAKE INSTALLATION REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

179-857 105-111 170-436 323-313 115-555 105-043 305-908 106-640 106-106 105-065 105-058 325-421 194-638 105-677 177-002

QTY

DESCRIPTION

REMARKS

2 BRAKE PIN 2 BOLT (1/2-NC X 4") 2 SHEAVE 1 BRACKET 2 EXTENSION SPRING 1 BOLT (1/2-NC X 1-1/4") 1 WEAR PAD 2 SCREW (M6-1.00 X 20MM,BUT SOC) 2 NUT (M6-1.00) 1 LOCKNUT (1/2-NC) 2 BELLEVILLE WASHER (1/2") 1 BRAKE LEVER 1 CABLE (5/32 X 34.5") 1 FLG BOLT (3/8-NC X 1-1/4") 1 SLEEVE

FOOTNOTES

NOTE:

A

809-738

28

HOOD 7 13

12

2 8 5 1

4

14 17 6 10 18 15

10

17

3

16

9

11

19 02

ID0032594

29

HOOD REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

1 HOOD 1 HINGE 1 PROP ROD LINK 1 SCREW (M8-1.25 X 20MM) 5 FLG LK SCREW (M8-1.25 X 16MM) 5 FLG LOCKNUT (3/8-NC) 5 BOLT (3/8-NC X 3/4", BUT SOC) 2 LATCH, ADJUST LEVER (LOCKING) 1 BOLT (M10-1.50 X 30MM,BUT SOC) 4 WASHER BELLEVILLE (3/8) 1 SCREW (M8-1.25 X 25MM) 1 MANUAL COMPARTMENT 4 POP RIVET (3/16" X .664") 1 FOIL TAPE (HI-TEMP ALUM) 13" WIDE 1 PROP ROD 1 LOCKNUT (M10-1.5) 2 LOCKNUT (M8-1.25, NLK) 2 BELLEVILLE WASHER (1/2") AR BULK EDGE (5/32",SOLD PER 1")

322-752 118-203 325-954 106-083 106-380 105-834 106-029 117-558 106-674 105-805 105-806 318-588 110-348 105-1084 325-953 106-758 107-096 105-058 115-686

DESCRIPTION

REMARKS

USE 1 @ 9.5"

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0032594

30

REAR COVER AND SIDE PANELS BEGINS WITH S/N V60000443

3 2 2 1 4

2 7 6 2

2 10

6 8

5 9

03

ID0035412

31

REAR COVER AND SIDE PANELS BEGINS WITH S/N V60000443 REF PART NO. NUMBER

QTY

1 325-735 2 106-382 3 115-415 4 105-825 5 324-934 6 106-380 7 300-1930 8 300-1931 9 106-386 10 106-381

1 7 1 2 1 4 1 1 1 1

DESCRIPTION

REMARKS

REAR COVER FLG LK SCREW (M10-1.50 X 20MM) SEAT BACK CUSHION FLG LK BOLT (3/8-NC X 3/4) FRAME FLG LK SCREW (M8-1.25 X 16MM) LEFT PANEL RIGHT PANEL FLG LOCKNUT (M8-1.25) FLG LK SCREW (M8-1.25 X 25MM)

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0035412

32

PLATFORM

4

6 8 1

7

5

3

A

2

809-740

33

PLATFORM REF PART NO. NUMBER

1 2 3 4 5 6 7 8

115-063 106-397 106-806 323-608 106-477 106-333 106-685 323-071

QTY

DESCRIPTION

REMARKS

2 ISOLATOR,80X57CF M12-1.75 C70 8 WASHER (M12, HARDENED) 4 FLG LK SCREW (M12-1.75 X 25MM) 1 MAT 1 SCREW (M12-1.75 X 45MM, 10.9) 1 SCREW (M12-1.75 X 40MM, 8.8) 2 LOCKNUT(M12-1.75,PRV TRQ,10.9) 1 PLATFORM

FOOTNOTES

NOTE:

A

809-740

34

OPERATOR CONSOLE

7 3

2 10 8 5

8

4 1 6 9

12

11

13

06

ID0035414

35

OPERATOR CONSOLE REF PART NO. NUMBER

QTY

1 194-644 2 324-764 3 194-645 4 111-064 5 106-640 6 106-385 7 106-382 8 350-2711 9 106-538 10 105-215 11 300-5717 12 215-1282 13 107-193

1 CABLE THROTTLE(50"HD) 1 CONSOLE 1 CHOKE CABLE (55") 1 KNOB (1/4-NC, ORANGE) 2 SCREW (M6-1.00 X 20MM,BUT SOC) 2 FLG LOCKNUT (M6-1.00) 4 FLG LK SCREW (M10-1.50 X 20MM) 1 SK350 SHIELDED HOUR/TACH METER 2 LOCKNUT (M6-1.00,PRV TRQ,10.9) 2 NUT (#6-32) 1 PLATE 1 IGNITION SWITCH (GROUNDED) 2 SCREW (M6-1.00 X 16MM,BUT SOC)

DESCRIPTION

REMARKS

SEE FOOTNOTE 4 SEE FOOTNOTE 1 & 2 - BEGINS WITH S/N_____________________.

SEE FOOTNOTE 3 - BEGINS WITH S/N______________________.

NOT SHOWN:

214-961 KEY, PAIR - SERVICE PART 214-962 SWITCH MOUNTING NUT - SERVICE PART 215-1716 32" BRAIDED SHIELDING, 3/8"

SEE FOOTNOTE 4

FOOTNOTES:

1. USE PLATE 325-659 (1) ON ALL E.C. UNITS 2. PLATE 325-160 ENDS WITH S/N______________. IT HAS BEEN REPLACED WITH 300-5717.

3. IGNITION SWITCH 215-005 ENDS WITH S/N____________. IT HAS BEEN REPLACED WITH 215-1282.

4. USE 350-2711 ASSEMBLY IF REPLACING HOUR METER 214-519. THE 350-2711 ASSEMBLY INCLUDES THE MOUNTING BOLTS, 105-189 @ 2X.

NOTE:

06

ID0035414

36

LIFT ARMS BEGINS WITH S/N CMWSK350L70000865

18 19

20

1

21

7

28 2 23 12

7

22

15

16

13

17 5 27 15

8 7

24

11 6

5 11 6

14 9

3

3 2

25 26

07

8

10

4 2

ID0182459

37

LIFT ARMS BEGINS WITH S/N CMWSK350L70000865 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

324-945 125-538 179-651 324-730 300-5003 105-510 181-974 179-104 181-982 179-908 118-424 300-2742 125-1000 106-469 105-969 105-814 106-095 110-973 105-197 105-820 183-411 320-689 179-907 323-625 323-626 107-483 106-535 106-470

QTY

1 3 2 1 2 2 3 2 1 1 2 1 1 1 2 2 2 5 4 6 2 2 1 1 1 1 1 1

DESCRIPTION

LIFT ARMS COMPOSITION BUSHING (1.5") LOCK PIN BUSHING QUICK ATTACHMENT PLATE LOCK PIN ROLL PIN (1/4" X 1-1/2") TAPERED INSERT (1.5") TAPERED PIN (1.500" X 4.330") TAPERED INSERT (1.25") TAPERED PIN (1.25" X 3.54") COMPRESSION SPRING CYL (2.5 X 1.25 X 10.0) COMPOSITION BUSHING (1.25") FLG SCREW (M12-1.75 X 30MM) FLG BOLT (5/8-NC X 1-1/2",GD8) FLG LOCKNUT (3/8-NC) SHLD BLT (1/2" X1-3/4",3/8-NC) COVER PLATE BOLT (1/4-NC X 1") FLG LK BOLT (1/4-NC X 3/4") PULL PIN (1/2" X 2") LIFT STOP TAPERED PIN (1.50" X 4.88") LEVEL INDICATOR TUBE LEVEL INDICATOR ROD SHLD BLT (M12 X 40MM,M10-1.50) SHLD BLT (M12 X 30MM,M10-1.50) FLG SCREW (M16-2.0 X 40MM)

REMARKS

SEE FOOTNOTE 1

SEE FOOTNOTE 1

USE LOCTITE 277 OR EQUIVALENT

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. ATTACHMENT PLATE 324-730 IS OBSOLETE. IF REPLACING USE PLATE 303-6998, PIN 177-1091, TAPER LOCK 181-1002, INDIACATOR ROD 303-6335, INDICATOR TUBE 303-6393, AND BOLT 107-043.

NOTE:

07

ID0182459

38

LIFT ARMS

ENDS WITH SERIAL NUMBER

18 19

20

1

21

7

28

2

23

12 22

16

7 15

17

13 8 27 15

7

5 11

5

24

11

8 6

6 3

3

9

14

10 2

25 4 2 26

04

ID0032673

39

LIFT ARMS

ENDS WITH SERIAL NUMBER REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

324-945 125-772 179-651 320-278 320-287 105-510 181-974 179-104 181-982 179-908 118-424 300-2742 125-771 106-469 105-969 105-814 106-095 110-973 105-197 105-820 183-411 320-689 179-907 323-625 323-626 107-483 106-535 106-470

QTY

1 3 2 1 2 2 3 2 1 1 2 1 1 1 2 2 2 5 4 6 2 2 1 1 1 1 1 1

DESCRIPTION

REMARKS

LIFT ARMS COMPOSITION BUSHING (1.5") LOCK PIN BUSHING QUICK ATTACHMENT LOCK PIN ROLL PIN (1/4" X 1-1/2") TAPERED INSERT (1.5") TAPERED PIN (1.500" X 4.330") TAPERED INSERT (1.25") TAPERED PIN (1.25" X 3.54") COMPRESSION SPRING CYL (2.5 X 1.25 X 10.0) COMPOSITION BUSHING (1.25") FLG SCREW (M12-1.75 X 30MM) FLG BOLT (5/8-NC X 1-1/2",GD8) FLG LOCKNUT (3/8-NC) SHLD BLT (1/2" X1-3/4",3/8-NC) COVER PLATE BOLT (1/4-NC X 1") FLG LK BOLT (1/4-NC X 3/4") PULL PIN (1/2" X 2") LIFT STOP TAPERED PIN (1.50" X 4.88") LEVEL INDICATOR TUBE LEVEL INDICATOR ROD SHLD BLT (M12 X 40MM,M10-1.50) SHLD BLT (M12 X 30MM,M10-1.50) FLG SCREW (M16-2.0 X 40MM)

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0032673

40

LIFT ARMS INSTALLATION

8 7

3

3

2

8

14

2 14 6 7 1

5 4

5

4

6

9 11

12 13 10

9

11

12

13 03

11

10 11

ID0032675

41

LIFT ARMS INSTALLATION REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

324-945 178-699 115-466 183-587 181-982 105-830 106-470 110-220 125-538 151-091 125-1000 110-055 115-483 181-974

QTY

1 2 2 2 2 2 2 2 2 2 4 2 2 2

DESCRIPTION

REMARKS

LIFT ARMS PIN EXTERNAL SNAP RING (1.500") TAPERED PIN (1.25" X 3") TAPERED INSERT (1.25") FLG LK BOLT (1/2-NC X 1-1/4") FLG SCREW (M16-2.0 X 40MM) MACH BUSHING (1-1/2", 14GA) COMPOSITION BUSHING (1.5") CYL (2.0 X 1.25 X 16.0) COMPOSITION BUSHING (1.25") MACH BUSHING (1-1/4", 14GA) KLIP RING (1.250") TAPERED INSERT (1.5")

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0032675

42

HYDRAULIC TANK

5

BEGINS WITH S/N ENDS WITH S/N

7 6 2 3 4

1

9

8 03

ID0148317

43

HYDRAULIC TANK BEGINS WITH S/N ENDS WITH S/N REF PART NO. NUMBER

QTY

150-1160 150-1235 125-498 153-607 153-606 111-120 105-214 153-594 115-165 121-040

1 1 2 1 1 6 1 1 1

1 2 3 4 5 6 7 8 9

DESCRIPTION

HYDRAULIC RESERVOIR HYDRAULIC RESERVOIR FLANGE, FILL NECK FLANGE GASKET STRAINER BASKET CAP FLG SCREW (#10-24 X .5") GASKET, FILL NECK CAP PLUG (08N, SOC) SIGHT GLASS

REMARKS

INCL. REF. NOS 1-9

NOT SHOWN:

FOOTNOTES:

1. 364-552 FILL NECK CONTAINS REF NO'S 2-7

NOTE:

03

ID0148317

44

HYDRAULIC TANK

BEGINS WITH S/N: A60000443

2

3

1

4

5 02

ID0159893

45

HYDRAULIC TANK

BEGINS WITH S/N: A60000443 REF PART NO. NUMBER

QTY

150-1160 150-1235 150-1063 105-214 121-040 115-165

1 1 6 1 1

1 2 3 4 5*

DESCRIPTION

HYDRAULIC RESERVOIR HYDRAULIC RESERVOIR FILLER NECK W/ SCREEN FLG SCREW (#10-24 X .5") SIGHT GLASS PLUG (08N, SOC)

REMARKS

INCL. REF. NOS 1-5

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. FILLER NECK REPLACEMENT GASKET # 153-607

NOTE:

02

ID0159893

46

HYDRAULIC TANK ENDS WITH S/N

8 9

5 10

6

SEE FOOTNOTE 1

7 6

4 1 2

3

03

ID0034139

47

HYDRAULIC TANK ENDS WITH S/N REF PART NO. NUMBER

QTY

364-702 115-320 116-218 115-165 364-700 125-498 153-607 153-606 111-120 153-594 105-214

1 1 1 1 1 2 1 1 1 6

1 2 3 4 5 6 7 8 9 10

DESCRIPTION

HYDRAULIC RESERVOIR GROMMET (1-1/2") SIGHT GLASS (2") PLUG (08N, SOC) SK350 HYDRAULIC TANK FLANGE FLANGE GASKET STRAINER BASKET CAP GASKET, FILL NECK CAP FLG SCREW (#10-24 X .5")

REMARKS

INCL REF NO.S 1-10

NOT SHOWN:

FOOTNOTES:

1. 364-552 FILL NECK; CONTAINS REF NO'S 5-10

NOTE:

03

ID0034139

48

HYD TANK & GRILL INSTALLATION BEGINS WITH S/N: A60000443

12 13 11 10 14

6 5 7 4 8

9

1 2 3

03

ID0148579

49

HYD TANK & GRILL INSTALLATION BEGINS WITH S/N: A60000443 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14

1 1 1 8 2 2 1 6 2 1 1 1 1 1

324-934 364-699 325-434 106-382 323-228 105-078 327-946 107-661 106-383 150-1160 177-251 118-476 327-993 108-230

DESCRIPTION

REMARKS

FRAME NOSE PIECE GRILLE FLG LK SCREW (M10-1.50 X 20MM) BUMPER NUT (1/4-NC) SUPPORT BRACKET FLG LKNUT (M10-1.50, PRV TRQ) FLG LK SCREW (M10-1.50 X 30MM) HYDRAULIC TANK SPACER FLAP MOUNTING BRACKET SCREW (M10-1.50 X 200MM)

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0148579

50

HYD TANK & GRILL INSTALLATION ENDS WITH S/N

8

7 6

1 5 4 7 2

3

7

03

ID0035454

51

HYD TANK & GRILL INSTALLATION ENDS WITH S/N REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

2 BUMPER 4 FLG LKNUT (M10-1.50, PRV TRQ) 2 NUT (1/4-NC) 1 GRILL 1 NOSE PIECE 1 HYDRAULIC TANK 11 FLG LK SCREW (M10-1.50 X 20MM) 1 INSULATION

323-228 107-661 105-078 325-434 364-699 364-702 106-382 118-365

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0035454

52

BATTERY

2 7

17

4

9 6

2

13 14 9

8 10

15 10 5

10

15

3

3

11 20

12 18 19

10

1

16

07

ID0035465

53

BATTERY REF PART NO. NUMBER

QTY

1 211-087 2 105-078 3 214-873 4 106-076 5 213-270 6 179-799 7 325-171 8 106-712 9 215-1715 10 213-297 11 325-589 12 106-381 13 106-386 14 116-126 15 106-353 16 106-557 17 105-842 18 106-556 19 110-333 20 115-704

1 4 1 2 1 2 1 2 1 1 1 1 1 1 2 1 1 1 1 1

REMARKS

DESCRIPTION

BATTERY JUMPER TERMINAL (RED) NUT (1/4-NC) POSITIVE JUMPER CABLE WASHER (1/4") BATTERY (12V, 340 CCA) J-HOOK BATTERY HOLDER FLG SCREW (M6-1.00 X 16MM) BAT CABLE (4 GA X 40", BLK) BAT CABLE (4 GA X 40", RED) BATTERY MOUNT FLG LK SCREW (M8-1.25 X 25MM) FLG LOCKNUT (M8-1.25) TERMINAL COVER (BLACK) FLG NUT (M6-1.00) NUT (M4-.70) SCREW (M8-1.25 X 20MM, SOC) SCREW (M4-0.70 X 20MM) BOLT-ON CLAMP (1") BULK EDGE (1/4", SOLD PER 1")

OBSOLETE, USE 140-2076 BATTERY (230 CCA, WET) OBSOLETE. USE 300-4334.

SEE FOOTNOTE 1 AND NOT SHOWN

USE 9.5"

NOT SHOWN:

217-819 215-305

BATTERY DISCONNECT SWITCH USE ON E.C. UNITS ONLY BAT CABLE (4 GA X 30", BLK) USE ON E.C. UNITS ONLY

FOOTNOTES:

1. MOVE THIS CABLE TO BATTERY DISCONNECT SWITCH FOR E.C. UNITS ONLY

NOTE:

07

ID0035465

54

TRACK FRAME

ENDS WITH S/N: CMWSK350P60000600

9 13

4

14

7

12

10

11

6

8 3 9

9

15 1

5

16

2 SEE NOTE 1 & 2

06

ID0042087

55

TRACK FRAME

ENDS WITH S/N: CMWSK350P60000600 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

117-047 170-336 170-335 174-009 107-337 106-442 105-310 105-501 158-164 105-082 106-397 105-065 106-073 322-694 322-717 322-716

QTY

1 1 2 1 2 2 1 1 1 4 4 4 1 1 1 1

DESCRIPTION

RIGHT TRACK ASSEMBLY COMPRESSION SPRING FRONT IDLER ROLLER IDLER ROLLER 11 TOOTH SPROCKET SCREW (M16-2.00 X 150MM, 10.9) FLG LKNUT (M16-2.0,PRVTRQ10.9) JAM NUT (3/4-NC) COTTER PIN (.125" X 2.0") HYD MOTOR BOLT (1/2-NC X 2-1/2") WASHER (M12, HARDENED) LOCKNUT (1/2-NC) BOLT (3/4-NC X 6") RIGHT TRACK FRAME SPRING GUIDE PUSH BLOCK

REMARKS

QUANTITIES REFLECT ONE SIDE ONLY COMPRESS TO 8 5/8 INCH SEE FRONT IDLER PAGE FOR SERVICE PARTS SEE IDLER ROLLER PAGE FOR SERVICE PARTS

OBSOLETE, SUPERSEEDED WITH 150-5159. SEE FOOTNOTE 1 & 2

322-695 LEFT TRACK FRAME

NOT SHOWN:

FOOTNOTES:

1. SERVICE PARTS: 107-034 CASTLE, 165-915 WOODRUFF KEY, AND 500-2449 BEARING 2. WHEN REPLACING HYDRAULIC TRACK DRIVE MOTOR, BOTH LEFT AND RIGHT MOTORS SHOULD BE REPLACED AT THE SAME TIME.

NOTE:

1. 322-933 TURF TRACK 2. 323-123 AGGRESSIVE TRACK

06

ID0042087

56

TRACK FRAME

ENDS W/ S/N CMWSK350V70000619

8 12

13

6

11

3 9

10 5

7 2 8

8 4

14 1 15

16

17

07

ID0167142

57

TRACK FRAME

ENDS W/ S/N CMWSK350V70000619 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

117-047 170-335 174-009 107-337 106-442 105-310 105-501 158-164 105-082 106-397 105-065 106-073 322-694 322-717 322-716 322-933 350-1641

QTY

1 2 1 2 2 1 1 1 4 4 4 1 1 1 1 1 1

DESCRIPTION

RIGHT TRACK ASSEMBLY COMPRESSION SPRING IDLER ROLLER 11 TOOTH SPROCKET SCREW (M16-2.00 X 150MM, 10.9) FLG LKNUT (M16-2.0,PRVTRQ10.9) JAM NUT (3/4-NC) COTTER PIN (.125" X 2.0") HYD MOTOR BOLT (1/2-NC X 2-1/2") WASHER (M12, HARDENED) LOCKNUT (1/2-NC) BOLT (3/4-NC X 6") RIGHT TRACK FRAME SPRING GUIDE PUSH BLOCK RUBBER TRACK FRONT IDLER ROLLER

REMARKS

QUANTITIES REFLECT ONE SIDE ONLY COMPRESS TO 8 5/8 INCH SEE IDLER ROLLER PAGE FOR SERVICE PARTS

OBSOLETE, SUPERSEEDED WITH 150-5159. SEE FOOTNOTE 1, 2 & 3

322-695 LEFT TRACK FRAME 323-123 AGGRESSIVE TRACK SEE FRONT IDLER PAGE FOR SERVICE PARTS

NOT SHOWN:

FOOTNOTES:

1. SERVICE PARTS: 107-034 CASTLE, 165-915 WOODRUFF KEY, AND 500-2449 BEARING. 2. TORQUE NUT OF HYD. MOTOR TO 275 FT-LBS DRY, 225 FT-LBS LUBRICATED. INCREASE TORQUE TO ALIGN HOLE FOR COTTER PIN. 3. WHEN REPLACING HYDRAULIC TRACK DRIVE MOTOR, BOTH LEFT AND RIGHT MOTORS SHOULD BE REPLACED AT THE SAME TIME.

NOTE:

07

ID0167142

58

TRACK FRAME

ENDS WITH S/N: CMWSK350E90001035

18 12

6

11

10

3 8 9

5

7 2

1

16

17

13

4 14

15

10

ID0170437

59

TRACK FRAME

ENDS WITH S/N: CMWSK350E90001035 REF PART NO. NUMBER

1 117-047 2 170-335 3 140-1085 4 107-337 5 106-442 6 105-310 7 105-501 8 105-082 9 106-397 10 105-065 11 106-073 12 322-694 13 322-717 14 300-3080 15 322-933 16 165-915 17 108-166 18 158-164

QTY

1 2 1 2 2 1 1 4 4 4 1 1 1 1 1 1 1 1

DESCRIPTION

RIGHT TRACK ASSEMBLY COMPRESSION SPRING IDLER ROLLER 11 TOOTH SPROCKET SCREW (M16-2.00 X 150MM, 10.9) FLG LKNUT (M16-2.0,PRVTRQ10.9) JAM NUT (3/4-NC) COTTER PIN (.125" X 2.0") BOLT (1/2-NC X 2-1/2") WASHER (M12, HARDENED) LOCKNUT (1/2-NC) BOLT (3/4-NC X 6") RIGHT TRACK FRAME SPRING GUIDE FRONT IDLER RUBBER TRACK KEY (5/16" X 1.00") CSTL NUT (1-20 NEF), HARDENED HYD MOTOR

REMARKS

QUANTITIES REFLECT ONE SIDE ONLY COMPRESS TO 8 5/8 INCH SEE IDLER ROLLER PAGE FOR SERVICE PARTS

322-695 LEFT TRACK FRAME SEE FRONT IDLER PAGE FOR SERVICE PARTS 323-123 AGGRESSIVE TRACK OBSOLETE, SUPERSEEDED WITH 150-5159. SEE FOOTNOTE 1, 2 & 3

NOT SHOWN:

FOOTNOTES:

1. SERVICE PARTS: 108-166 CASTLE NUT, 165-915 KEY, AND 500-2449 BEARING. 2. REMOVE ALL PAINT, RUST, BREASE AND OIL FROM TAPERED BORE IN SPROCKET AND ON THE TAPERED MOTOR SHAFT. USE A CLEAN WHITE RAG OR PAPER TOWEL WITH ALCOHOL TO WIPE CLEAN THE TAPERED BORE IN SPROCKET AND THE TAPERED MOTOR SHAFT. ALLOW SPROCKET AND MOTOR SHAFT TO DRY BEFORE ASSEMFLING. TORQUE NUT, 108-166 OF HYD. MOTOR TO 275 FT-LBS DRY. INCREASE TORQUE TO ALIGN HOLE FOR COTTER PIN. NOTE: DO NOT USE ABRASIVE MATERIAL, SUCH AS SANDPAPER OR ABRASION WHEEL, TO REMOVE CONTAMINATES FROM SPROCKET BORE OR ON MOTOR SHAFT. 3. WHEN REPLACING HYDRAULIC TRACK DRIVE MOTOR, BOTH LEFT AND RIGHT MOTORS SHOULD BE REPLACED AT THE SAME TIME. NOTE:

10

ID0170437

60

TRACK FRAME

BEGIN WITH S/N: CMWSK350C90001036

12 9 14

7

13 4 10 11

6

8 3 16

17

15 1

5

18 2

08

ID0201692

61

TRACK FRAME

BEGIN WITH S/N: CMWSK350C90001036 REF PART NO. NUMBER

1 117-047 2 300-3080 3 170-335 4 140-1085 5 107-337 6 106-442 7 105-310 8 105-501 9 158-164 10 105-082 11 106-397 12 105-065 13 106-073 14 322-694 15 322-717 16 108-166 17 165-915 18 322-933

QTY

1 1 2 1 2 2 1 1 1 4 4 4 1 1 1 1 1 1

DESCRIPTION

RIGHT TRACK ASSEMBLY COMPRESSION SPRING FRONT IDLER IDLER ROLLER 11 TOOTH SPROCKET SCREW (M16-2.00 X 150MM, 10.9) FLG LKNUT (M16-2.0,PRVTRQ10.9) JAM NUT (3/4-NC) COTTER PIN (.125" X 2.0") HYD MOTOR BOLT (1/2-NC X 2-1/2") WASHER (M12, HARDENED) LOCKNUT (1/2-NC) BOLT (3/4-NC X 6") RIGHT TRACK FRAME SPRING GUIDE CSTL NUT (1-20 NEF), HARDENED KEY (5/16" X 1.00") RUBBER TRACK

REMARKS

QUANTITIES REFLECT ONE SIDE ONLY COMPRESS TO 8 5/8 INCH SEE FRONT IDLER PAGE FOR SERVICE PARTS SEE IDLER ROLLER PAGE FOR SERVICE PARTS

OBSOLETE, SUPERSEEDED WITH 150-5159. SEE FOOTNOTE 1, 2 & 3

322-695 LEFT TRACK FRAME

323-123 AGGRESSIVE TRACK

NOT SHOWN:

FOOTNOTES:

1. SERVICE PARTS: 108-166 CASTLE NUT, 165-915 KEY, AND 500-2449 BEARING. 2. REMOVE ALL PAINT, RUST, GREASE AND OIL FROM TAPERED BORE IN SPROCKET AND ON THE TAPERED MOTOR SHAFT. USE A CLEAN WHITE RAG OR PAPER TOWEL WITH ALCOHOL TO WIPE CLEAN THE TAPERED BORE IN SPROCKET AND THE TAPERED MOTOR SHAFT. ALLOW SPROCKET AND MOTOR SHAFT TO DRY BEFORE ASSEMBLING. TORQUE NUT, 108-166, OF HYD. MOTOR TO 275 FT-LBS DRY. INCREASE TORQUE TO ALGIN HOLE FOR COTTER PIN. NOTE: DO NOT USE ABRASIVE MATERIAL, SUCH AS SANDPAPER OR ABRASION WHEE, TO REMOVE CONTAMINATES FROM SPROCKET BORE OR ON MOTOR SHAFT. 3. WHEN REPLACING HYDRAULIC TRACK DRIVE MOTOR, BOTH LEFT AND RIGHT MOTORS SHOULD BE REPLACED AT THE SAME TIME. NOTE:

08

ID0201692

62

TRACK FRAME INSTALLATION

2

1

3 A

808-854

63

TRACK FRAME INSTALLATION REF PART NO. NUMBER

1 2 3

322-695 106-471 322-694

QTY

DESCRIPTION

REMARKS

1 LEFT TRACK FRAME 8 FLG SCREW (M16-2.00 X 30MM) 1 RIGHT TRACK FRAME

FOOTNOTES

NOTE:

A

808-854

64

FRONT IDLER

ENDS WITH S/N: CMWSK350P60000600 ENDS WITH S/N: CMWSK650A60000427

ENDS WITH S/N: CMWSK500H60000254 ENDS WITH S/N: CMWXT850C60000125

2

4 1

3 3

3 2

1

10

ID0024142

65

FRONT IDLER

ENDS WITH S/N: CMWSK350P60000600 ENDS WITH S/N: CMWSK650A60000427 REF PART NO. NUMBER

QTY

170-336 353-477 105-561 170-342 167-307

2 2 1 1

1 2 3 4

DESCRIPTION

FRONT IDLER ROLLER BLOCK, PUSH ROLL PIN (3/8" X 2-3/4") IDLER ROLLER SUB SHAFT, IDLER

ENDS WITH S/N: CMWSK500H60000254 ENDS WITH S/N: CMWXT850C60000125 REMARKS

INCLUDES REF NO.'S 1-4 OBSOLETE, SEE FOOTNOTE 2 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. FOR REPLACEMENT BEARINGS, USE PART NUMBER 125-005.

2. SEE PARTS PAGE FRONT IDLER" ID0253424 FOR CURRENT PRODUCTION COMPONENTS.

NOTE:

10

ID0024142

66

FRONT IDLER BEGINS WITH S/N: CMWSK350V70000601 BEGINS WITH S/N: CMWSK500H70000255 BEGINS WITH S/N: CMWSK650L70000428 BEGINS WITH S/N: CMWXT850T60000126

ENDS WITH S/N: CMWSK350C70000618 ENDS WITH S/N: CMWSK500A70000267 ENDS WITH S/N: CMWSK650V70000542 ENDS WITH S/N: CMWXT850P70000145

3

1 4

2

4

05

ID0167047

67

FRONT IDLER BEGINS WITH S/N: CMWSK350V70000601 BEGINS WITH S/N: CMWSK500H70000255 BEGINS WITH S/N: CMWSK650L70000428 BEGINS WITH S/N: CMWXT850T60000126 REF PART NO. NUMBER

1 2 3 4

350-1641 300-3079 353-477 105-561 350-1642

QTY

DESCRIPTION

- FRONT IDLER ROLLER 1 SHAFT, IDLER 2 BLOCK, PUSH 2 ROLL PIN (3/8" X 2-3/4") 1 FRONT IDLER SUB

ENDS WITH S/N: CMWSK350C70000618 ENDS WITH S/N: CMWSK500A70000267 ENDS WITH S/N: CMWSK650V70000542 ENDS WITH S/N: CMWXT850P70000145 REMARKS

INCLUDES REF NO'S 1 - 4 OBSOLETE, SEE FOOTNOTE 2 SEE FOOTNOTE 1, GREASE ZERK NOT REQUIRED

NOT SHOWN:

FOOTNOTES:

1. FOR REPLACEMENT BEARINGS USE 125-1006, GREASE ZERK NOT REQUIRED. 2. SEE PARTS PAGE "FRONT IDLER" ID0253424 FOR CURRENT PRODUCTION COMPONENTS.

NOTE:

05

ID0167047

68

FRONT IDLER BEGINS WITH S/N: CMWSK350V70000619

4

2 1

2

2 3

03

ID0165138

69

FRONT IDLER BEGINS WITH S/N: CMWSK350V70000619 REF PART NO. NUMBER

300-3080 1 300-3098 2 350-1642 3 300-3079 4 105-170

QTY

DESCRIPTION

- IDLER ROLLER SUB 1 PUSH BLOCK 1 FRONT IDLER SUB 1 SHAFT, IDLER 2 BOLT (5/16-NC X 3")

REMARKS

INCLUDES REF NO'S 1-4 SEE FOOTENOTE 1, GREASE ZERK NOT REQUIRED

NOT SHOWN:

FOOTNOTES:

1. FOR REPLACEMENT BEARINGS USE 125-1006, GREASE ZERK NOT REQUIRED.

NOTE:

03

ID0165138

70

IDLER ROLLER

1

2

1

06

ID0024145

71

IDLER ROLLER REF PART NO. NUMBER

1 2

170-335 125-124 353-487

QTY

DESCRIPTION

- IDLER ROLLER 2 BALL BEARING (.631) 1 SPACER TUBE

REMARKS

INCLUDES REF NO.'S 1, 2

NOT SHOWN:

FOOTNOTES:

NOTE:

06

ID0024145

72

BOLT-ON TOOTH

3

5

1

4

02

2

ID0220058

73

BOLT-ON TOOTH REF PART NO. NUMBER

QTY

190-10146 300-7090 300-7091 105-1283 106-096 105-065

1 1 1 2 2

1 2 3 4 5

DESCRIPTION

SINGLE TOOTH KIT (FLANGED) BOLT-ON TOOTH ADAPTER DUAL PURPOSE TOOTH COIL PIN FLG BOLT (1/2-NC X 1-3/4",GD8) LOCKNUT (1/2-NC, GR B, PRV TQ)

REMARKS

INCLUDES ITEMS 1 THRU 5

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0220058

74

NOTES:

ID0134963

75

HYDRAULICS

ID0135071

76

PUMP INLET HYDRAULICS

11

BEGINS WITH S/N:

12 16

12

15 12

12

11

22 12 17

18 1

23 3 12

2 4

9

11

6

19 4

5 8

10 14

7

4 13

4

24

20

10

21 01

ID0386973

77

PUMP INLET HYDRAULICS BEGINS WITH S/N: REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

158-255 150-1235 154-362 110-026 116-636 159-386 155-910 155-198 514-062 110-353 514-169 110-217 116-636 116-460 156-729 116-322 116-322 116-322 360-336 155-174 155-280 150-4624 150-4623 117-706

QTY

1 1 1 4 1 1 1 1 1 2 3 6 1 1 1 1 1 1 1 2 1 1 1 1

DESCRIPTION

HYD CONTROL VALVE (3-SPOOL) HYDRAULIC RESERVOIR S/O COUPLER (10S-12H90) WORM CLAMP (1/2" TO 1-1/4") BULK HOSE (3/4", SOLD PER FT) FILTER HEAD (12SF-12SF) FILTER ELEMENT (1-UNF) S/O COUPLER (12S-12H90-06SF) S/O COUPLER (12S-16H90-06SF) WORM CLAMP (3/4" TO 1-1/2") S/O COUPLER (08H-06S90) WORM CLAMP (7/16" TO 1") BULK HOSE (3/4", SOLD PER FT) BULK HOSE (1", SOLD PER FT) S/O TEE (O8H-O8H-O8H) BULK HOSE (1/2",SOLD PER 1") BULK HOSE (1/2",SOLD PER 1") BULK HOSE (1/2",SOLD PER 1") OIL COOLER S/O COUPLER (12S-12H90) S/O (20S-16H90,06SF-06SF-06SF) HYD PUMP PK12, L OPTION, 15MM KEY, LEFT HYD PUMP PK12, L OPTION, 15MM KEY, RIGHT ABRASION SLEEVE (1.59" X 17")

REMARKS

USE 1 @ 11.00"

USE 1 @ 16.75" USE 1 @ 8.00" USE 1 @ 3.25" USE 1 @ 5.00" USE 1 @ 17.00"

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0386973

78

PUMP INLET HYDRAULICS

11

BEGINS WITH S/N: CMWSK350CE0001211 ENDS WITH S/N:

12

16

12

15 12

12

11

22 12 17

18 1

23 3 12

2 4

9

11

6

19 4

5 8

10 14

7

4 13

4

24

20

10

21 07

ID0148755

79

PUMP INLET HYDRAULICS

BEGINS WITH S/N: CMWSK350CE0001211 ENDS WITH S/N: REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

158-255 150-1235 154-362 110-026 116-636 159-386 155-910 155-198 514-062 110-353 514-169 110-217 116-636 116-460 156-729 116-322 116-322 116-322 360-336 155-174 155-280 150-4084 150-4083 117-706

QTY

1 1 1 4 1 1 1 1 1 2 3 6 1 1 1 1 1 1 1 2 1 1 1 1

DESCRIPTION

HYD CONTROL VALVE (3-SPOOL) HYDRAULIC RESERVOIR S/O COUPLER (10S-12H90) WORM CLAMP (1/2" TO 1-1/4") BULK HOSE (3/4", SOLD PER FT) FILTER HEAD (12SF-12SF) FILTER ELEMENT (1-UNF) S/O COUPLER (12S-12H90-06SF) S/O COUPLER (12S-16H90-06SF) WORM CLAMP (3/4" TO 1-1/2") S/O COUPLER (08H-06S90) WORM CLAMP (7/16" TO 1") BULK HOSE (3/4", SOLD PER FT) BULK HOSE (1", SOLD PER FT) S/O TEE (O8H-O8H-O8H) BULK HOSE (1/2",SOLD PER 1") BULK HOSE (1/2",SOLD PER 1") BULK HOSE (1/2",SOLD PER 1") OIL COOLER S/O COUPLER (12S-12H90) S/O (20S-16H90,06SF-06SF-06SF) HYD PUMP PJ12 15MM KEYED SHAFT HYD PUMP PJ12 15MM KEYED SHAFT ABRASION SLEEVE (1.59" X 17")

REMARKS

USE 1 @ 11.00"

USE 1 @ 16.75" USE 1 @ 8.00" USE 1 @ 3.25" USE 1 @ 5.00" USE 1 @ 17.00"

NOT SHOWN:

FOOTNOTES:

NOTE:

07

ID0148755

80

PUMP INLET HYDRAULICS

11

ENDS WITH S/N

12 16

12

15 12

12

22 12 18

11

17

1

23 3 9

4

2

4

12 11

5 10

8 4

20 19

6

7

14

13

4 24 20 10 21 B

809-769

81

PUMP INLET HYDRAULICS ENDS WITH S/N REF PART NO. NUMBER

QTY

1 159-905 2 364-702 3 156-960 4 110-026 5 116-636 6 159-386 7 155-910 8 155-198 9 514-062 10 110-353 11 514-169 12 110-217 13 116-636 14 116-460 15 156-729 16 116-322 17 116-322 18 116-322 19 360-336 20 155-174 21 155-280 22 158-153 23 158-152 24 117-706

1 1 1 4 1 1 1 1 1 2 3 6 1 1 1 1 1 1 1 2 1 1 1 1

DESCRIPTION

HYD CONTROL VALVE (3-SPOOL) HYDRAULIC TANK S/O COUPLER (O8S-12H90) WORM CLAMP (1/2" TO 1-1/4") BULK HOSE (3/4", SOLD PER FT) FILTER HEAD (12SF-12SF) FILTER ELEMENT (1-UNF) S/O COUPLER (12S-12H90-06SF) S/O COUPLER (12S-16H90-06SF) WORM CLAMP (3/4" TO 1-1/2") S/O COUPLER (08H-06S90) WORM CLAMP (7/16" TO 1") BULK HOSE (3/4", SOLD PER FT) BULK HOSE (1", SOLD PER FT) S/O TEE (O8H-O8H-O8H) BULK HOSE (1/2",SOLD PER 1") BULK HOSE (1/2",SOLD PER 1") BULK HOSE (1/2",SOLD PER 1") OIL COOLER S/O COUPLER (12S-12H90) S/O (20S-16H90,06SF-06SF-06SF) HYDRAULIC PUMP HYDRAULIC PUMP ABRASION SLEEVE (1.59" X 17")

REMARKS

ENDS WITH S/N ENDS WITH S/N USE 1 @ 11.00"

USE 1 @ 16.75" USE 1 @ 8.00" USE 1 @ 3.25" USE 1 @ 5.00" USE 1 @ 17.00"

FOOTNOTES

NOTE:

B

809-769

82

PUMP INLET HYDRAULICS

11

ENDS WITH S/N

12 16

12

15 12

12

22 12 18

11

17

1

23 3 9

4

2

4

12 11

5 10

8 4

20 19

6

7

14

13

4 24 20 10 21 03

ID0063924

83

PUMP INLET HYDRAULICS ENDS WITH S/N REF PART NO. NUMBER

QTY

1 158-255 2 364-702 3 154-362 4 110-026 5 116-636 6 159-386 7 155-910 8 155-198 9 514-062 10 110-353 11 514-169 12 110-217 13 116-636 14 116-460 15 156-729 16 116-322 17 116-322 18 116-322 19 360-336 20 155-174 21 155-280 22 158-153 23 158-152 24 117-706

1 1 1 4 1 1 1 1 1 2 3 6 1 1 1 1 1 1 1 2 1 1 1 1

DESCRIPTION

HYD CONTROL VALVE (3-SPOOL) HYDRAULIC TANK S/O COUPLER (10S-12H90) WORM CLAMP (1/2" TO 1-1/4") BULK HOSE (3/4", SOLD PER FT) FILTER HEAD (12SF-12SF) FILTER ELEMENT (1-UNF) S/O COUPLER (12S-12H90-06SF) S/O COUPLER (12S-16H90-06SF) WORM CLAMP (3/4" TO 1-1/2") S/O COUPLER (08H-06S90) WORM CLAMP (7/16" TO 1") BULK HOSE (3/4", SOLD PER FT) BULK HOSE (1", SOLD PER FT) S/O TEE (O8H-O8H-O8H) BULK HOSE (1/2",SOLD PER 1") BULK HOSE (1/2",SOLD PER 1") BULK HOSE (1/2",SOLD PER 1") OIL COOLER S/O COUPLER (12S-12H90) S/O (20S-16H90,06SF-06SF-06SF) HYDRAULIC PUMP HYDRAULIC PUMP ABRASION SLEEVE (1.59" X 17")

REMARKS

BEGINS WITH S/N

USE 1 @ 11.00"

USE 1 @ 16.75" USE 1 @ 8.00" USE 1 @ 3.25" USE 1 @ 5.00" USE 1 @ 17.00"

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0063924

84

AUXILIARY HYDRAULICS

SK350 END WITH S/N______; ENDS WITH S/N:CMWSK350_____

11

7

8 17 9 8 17 16 12

10

14

15

2

13

5

1 6

05

4

3

ID0032763

85

AUXILIARY HYDRAULICS

SK350 END WITH S/N______; ENDS WITH S/N:CMWSK350_____ REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

158-255 515-533 159-999 159-999 154-233 154-438 159-788 154-279 154-220 106-332 105-894 159-386 155-910 155-198 154-226 117-702 117-416

QTY

1 1 1 1 1 1 1 2 1 2 2 1 1 1 1 1 2

DESCRIPTION

REMARKS

HYD CONTROL VALVE (3-SPOOL) HOSE (04OFX-68"-3000) HOSE (08OFX90M-50"-3000) HOSE (08OFX90M-50"-3000) CONNECTOR (08S-08O) CONNECTOR (08S-08O, LG) QDC MANIFOLD CONNECTOR (08O-10S) CONNECTOR (04O-06S) SCREW (M10-1.50 X 70MM) LOCKNUT(M10-1.50,PRV TRQ,10.9) FILTER HEAD (12SF-12SF) FILTER ELEMENT (1-UNF) S/O COUPLER (12S-12H90-06SF) CONNECTOR (04O-06S90) ABRASION SLEEVE (1.00" X 68") ABRASION SLEEVE (1.00" X 50")

ENDS WITH S/N

1/2" MALE COUPLER KIT 3/8" MALE COUPLER KIT 1/2" FEMALE COUPLER KIT ADAPTER BUSHING

USE SEAL KIT 500-2371

ENDS WITH S/N ENDS WITH S/N ENDS WITH S/N OBSOLETE, SEE NOT SHOWN FOR SERVICE PARTS.

NOT SHOWN:

158-178 158-179 158-180 159-802

USE SEAL KIT 500-2371

FOOTNOTES:

NOTE:

05

ID0032763

86

AUXILIARY HYDRAULICS

SK350 BEGINS WITH S/N: CMWSK350_____

11

7

8 17 9 8 17 16 12

14

15

13

10

2

5

1 6

02

4

3

ID0304619

87

AUXILIARY HYDRAULICS

SK350 BEGINS WITH S/N: CMWSK350_____ REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

158-255 515-533 515-357 159-999 154-233 154-438 150-2410 154-279 154-220 106-332 105-894 159-386 155-910 155-198 154-226 117-702 117-416

QTY

1 1 1 1 1 1 1 2 1 2 2 1 1 1 1 1 2

DESCRIPTION

HYD CONTROL VALVE (3-SPOOL) HOSE (04OFX-68"-3000) HOSE (08OFX90L-50"-3000) HOSE (08OFX90M-50"-3000) CONNECTOR (08S-08O) CONNECTOR (08S-08O, LG) QDC MANIFOLD CONNECTOR (08O-10S) CONNECTOR (04O-06S) SCREW (M10-1.50 X 70MM) LOCKNUT(M10-1.50,PRV TRQ,10.9) FILTER HEAD (12SF-12SF) FILTER ELEMENT (1-UNF) S/O COUPLER (12S-12H90-06SF) CONNECTOR (04O-06S90) ABRASION SLEEVE (1.00" X 68") ABRASION SLEEVE (1.00" X 50")

REMARKS

ENDS WITH S/N

ENDS WITH S/N ENDS WITH S/N SEE NOT SHOWN FOR SERVICE PARTS

NOT SHOWN:

150-3702 150-3703 150-3704

1/2" MALE COUPLER KIT 3/8" MALE COUPLER KIT 1/2" FEMALE COUPLER KIT

FOOTNOTES:

NOTE:

02

ID0304619

88

AUXILIARY HYDRAULICS

BEGINS WITH S/N CMWSK350L70002436 ENDS WITH S/N: CMWSK350______

19 11 3

7

8

17

9 2 17

18

4

20

8

10 12

16

14

2

15

5 13 1

08

6

4

3

ID0063994

89

AUXILIARY HYDRAULICS

BEGINS WITH S/N CMWSK350L70002436 ENDS WITH S/N: CMWSK350______ REF PART NO. NUMBER

QTY

1 158-255 2 515-533 3 159-999 4 159-999 5 154-233 6 154-438 7 159-788 8 154-279 9 154-220 10 106-332 11 105-894 12 159-386 13 155-910 14 155-198 15 154-226 16 117-702 17 117-416 18 105-1284 19 159-870 20 159-871

1 1 1 1 1 1 1 2 1 2 2 1 1 1 1 1 2 1 1 1

DESCRIPTION

HYD CONTROL VALVE (3-SPOOL) HOSE (04OFX-68"-3000) HOSE (08OFX90M-50"-3000) HOSE (08OFX90M-50"-3000) CONNECTOR (08S-08O) CONNECTOR (08S-08O, LG) QDC MANIFOLD CONNECTOR (08O-10S) CONNECTOR (04O-06S) SCREW (M10-1.50 X 70MM) LOCKNUT(M10-1.50,PRV TRQ,10.9) FILTER HEAD (12SF-12SF) FILTER ELEMENT (1-UNF) S/O COUPLER (12S-12H90-06SF) CONNECTOR (04O-06S90) ABRASION SLEEVE (1.00" X 68") ABRASION SLEEVE (1.00" X 50") DUST CAP (3/8" QD) DUST CAP DUST CAP

REMARKS

OBSOLETE, SEE NOT SHOWN FOR SERVICE PARTS

NOT SHOWN:

158-178 158-179 158-180 159-802

1/2" MALE COUPLER KIT 3/8" MALE COUPLER KIT 1/2" FEMALE COUPLER KIT ADAPTER BUSHING

USE SEAL KIT 500-2371 USE SEAL KIT 500-2371

FOOTNOTES:

NOTE:

08

ID0063994

90

AUXILIARY HYDRAULICS

BEGINS WITH S/N: CMWSK350__________

19 11 3

7

8

17

9 2 17

18

4

20

8

10 12

16

14

2

15

5 13 1

01

6

4

3

ID0304692

91

AUXILIARY HYDRAULICS

BEGINS WITH S/N: CMWSK350__________ REF PART NO. NUMBER

QTY

1 158-255 2 515-533 3 159-999 4 159-999 5 154-233 6 154-438 7 150-2410 8 154-279 9 154-220 10 106-332 11 105-894 12 159-386 13 155-910 14 155-198 15 154-226 16 117-702 17 117-416 18 105-1284 19 159-870 20 159-871

1 1 1 1 1 1 1 2 1 2 2 1 1 1 1 1 2 1 1 1

DESCRIPTION

HYD CONTROL VALVE (3-SPOOL) HOSE (04OFX-68"-3000) HOSE (08OFX90M-50"-3000) HOSE (08OFX90M-50"-3000) CONNECTOR (08S-08O) CONNECTOR (08S-08O, LG) QDC MANIFOLD CONNECTOR (08O-10S) CONNECTOR (04O-06S) SCREW (M10-1.50 X 70MM) LOCKNUT(M10-1.50,PRV TRQ,10.9) FILTER HEAD (12SF-12SF) FILTER ELEMENT (1-UNF) S/O COUPLER (12S-12H90-06SF) CONNECTOR (04O-06S90) ABRASION SLEEVE (1.00" X 68") ABRASION SLEEVE (1.00" X 50") DUST CAP (3/8" QD) DUST CAP DUST CAP

REMARKS

SEE NOT SHOWN FOR SERVICE PARTS

NOT SHOWN:

150-3702 150-3703 150-3704

1/2" MALE COUPLER KIT 3/8" MALE COUPLER KIT 1/2" FEMALE COUPLER KIT

FOOTNOTES:

NOTE:

01

ID0304692

92

LIFT CYLINDER HYDRAULICS

2

11 2

8

7

11

5 8

8

7

10

4

1 6

3

8

9 4 6 5

B

3

809-749

93

LIFT CYLINDER HYDRAULICS REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11

158-255 151-091 515-011 515-041 149-064 159-963 149-064 154-252 117-411 117-672 117-218

QTY

1 2 1 1 1 2 1 4 1 1 2

DESCRIPTION

REMARKS

HYD CONTROL VALVE (3-SPOOL) CYL (2.0 X 1.25 X 16.0) HOSE (04OFX90-32"-3000) HOSE (04OFX90-20"-3000) HOSE (04OFX90L-54"-3000) CONNECTOR (06S-04O-040) HOSE (04OFX90L-54"-3000) CONNECTOR (04S-04O90) ABRASION SLEEVE (1.00" X 32") ABRASION SLEEVE (1.00" X 20") ABRASION SLEEVE (1" X 52")

FOOTNOTES

NOTE:

B

809-749

94

TILT CYLINDER HYDRAULICS

12

7 3 11

14

9 10

13 2 11

15 10

6

1 8

4

2 5

4

03

5

ID0032777

95

TILT CYLINDER HYDRAULICS REF PART NO. NUMBER

QTY

1 158-255 2 154-841 3 515-190 4 155-254 5 154-252 6 154-342 7 159-537 8 159-532 9 320-740 10 154-228 11 154-373 12 117-398 13 117-209 14 300-2742 15 157-038

1 1 1 2 2 1 1 1 1 2 2 1 1 1 1

DESCRIPTION

REMARKS

HYD CONTROL VALVE (3-SPOOL) HOSE (04OFX45-94"-3000) HOSE (04OFX90S-88"-3000) REDUCER (06S-04SF) CONNECTOR (04S-04O90) CONNECTOR (06S-06O90) CONNECTOR (06S-06OBK25) HYD LINE (-06) TILT CYLINDER BULKHEAD PLATE UNION (06O-06OFX90) REDUCER (04O-06OF) ABRASION SLEEVE (1.00" X 86") ABRASION SLEEVE (1.00" X 90") CYL (2.5 X 1.25 X 10.0) O-RING (012 D90)

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0032777

96

GROUND DRIVE HYDRAULICS

BEGINS WITH S/N: CMWSK350CE0001211

20 19 15 15

12

13 11

17 16

18

14 7

4

16

10 8

2

4

17

6 9 5

8

3

1 1 21 22

05

ID0035630

97

GROUND DRIVE HYDRAULICS

BEGINS WITH S/N: CMWSK350CE0001211 REF PART NO. NUMBER

QTY

1 154-279 2 159-740 3 159-739 4 110-270 5 305-256 6 106-329 7 106-561 8 157-038 9 159-741 10 159-742 11 154-887 12 154-887 13 159-998 14 154-887 15 154-225 16 111-146 17 117-670 18 115-713 19 150-4624 20 150-4623 21 158-164 22 158-164

4 1 1 4 2 2 2 4 1 1 1 1 1 1 4 1 4 1 1 1 1 1

DESCRIPTION

CONNECTOR (08O-10S) HYDRAULIC LINE (-08) HYDRAULIC LINE (-08) BOLT-ON CLAMP (9/16", HALF) BACKUP SPACER SCREW (M8-1.25 X 50MM) LOCKNUT (M8-1.25,PRV TRQ,10.9) O-RING (012 D90) HYDRAULIC LINE (-08) HYDRAULIC LINE (-08) HOSE (06OFX45-23"-3000) HOSE (06OFX45-23"-3000) HOSE (06OFX45-24"-3000) HOSE (06OFX45-23"-3000) CONNECTOR (06O-08S45) BOLT ON CLAMP (5/8" X 5/8" SET) ABRASION SLEEVE (1" X 10") ABRASION SLEEVE (1.59" X 24") HYD PUMP PK12, L OPTION, 15MM KEY, LEFT HYD PUMP PK12, L OPTION, 15MM KEY, RIGHT HYD MOTOR HYD MOTOR

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 OBSOLETE, SUPERSEEDED WITH 150-5159. SEE FOOTNOTE 2 & 3 OBSOLETE, SUPERSEEDED WITH 150-5159. SEE FOOTNOTE 2 & 3

NOT SHOWN:

FOOTNOTES:

1. SEAL KIT: 191-413 2. MOTOR BALL BEARING: 500-2449 3. WHEN REPLACING HYDRAULIC TRACK DRIVE MOTOR, BOTH LEFT AND RIGHT MOTORS SHOULD BE REPLACED AT THE SAME TIME.

NOTE:

05

ID0035630

98

CASE DRAIN

3

8

7

6 4

5

2

1

03

ID0042083

99

CASE DRAIN REF PART NO. NUMBER

1 2 3 4 5 6 7 8

514-049 158-186 110-217 154-229 158-185 158-187 155-280 159-916

QTY

2 2 3 1 1 1 1 1

DESCRIPTION

REMARKS

CONNECTOR (04S-06O90) HOSE 06OFX90L-BARE END-5"-250 WORM CLAMP (7/16" TO 1") BK CONNECTOR (06O-06O90BK) TEE (06OFX-06H-06H) HOSE 06OFX45-BARE-10.75"-250 S/O (20S-16H90,06SF-06SF-06SF) ELBOW (-06S X -06H90)

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0042083

100

HYDRAULIC CONTROLS 13 13

27

25

10 26

9 6

8

28 29

5

4

12

12

7

11

3 1 23 22 24 20

21 2

15 14 18 17 04

16

19 ID0035638

101

HYDRAULIC CONTROLS REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

158-255 194-631 106-232 324-943 324-964 110-530 107-669 324-983 324-984 118-336 106-078 106-380 110-465 324-944 108-142 105-085 105-095 115-640 106-685 105-677 170-436 322-390 105-814 324-942 323-659 323-660 150-4084 150-4083 106-561

QTY

1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

HYD CONTROL VALVE (3-SPOOL) CABLE (5/32 X 22.5") SCREW (M8-1.25 X 16MM) CABLE CLIP LEVER HANDLE (1/2-NC, GREEN) JAM NUT (M12-1.75) LEVER LEVER RELEASE KNOB (3/8-NC YELLOW) NUT (M8-1.25) FLG LK SCREW (M8-1.25 X 16MM) KNOB (1/2-NC, ORANGE) PEDAL EYE BOLT (1/4-NC X 3") LOCKNUT (1/4"-NC) WASHER (1/4") COMPRESSION SPRING (3") LOCKNUT(M12-1.75,PRV TRQ,10.9) FLG BOLT (3/8-NC X 1-1/4") SHEAVE SLEEVE FLG LOCKNUT (3/8-NC) BRACKET LEVER LEVER HYD PUMP PJ12 15MM KEYED SHAFT HYD PUMP PJ12 15MM KEYED SHAFT LOCKNUT (M8-1.25,PRV TRQ,10.9)

REMARKS

SEE FOOTNOTE 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. SEAL KIT: 191-413 2. 158-1006 REPLACEMENT CONTROL RETURN SPRING.

NOTE:

04

ID0035638

102

RETURN HYDRAULICS

BEGINS WITH S/N: CMWSK350CE0001211

10

2 1

13

11

6

3

7 4 5

4

8

05

9

12

ID0148888

103

RETURN HYDRAULICS

BEGINS WITH S/N: CMWSK350CE0001211 REF PART NO. NUMBER

QTY

1 150-1160 2 159-916 3 159-917 4 110-217 5 116-322 6 116-881 7 116-881 8 155-280 9 514-169 10 150-4084 11 150-4083 12 117-607 13 110-249

1 2 1 4 1 1 1 1 1 1 1 1 2

DESCRIPTION

HYDRAULIC TANK ELBOW (-06S X -06H90) TEE (-O8H-O6H-O6H) WORM CLAMP (7/16" TO 1") BULK HOSE (1/2",SOLD PER 1") BULK HOSE (3/8", SOLD PER FT) BULK HOSE (3/8", SOLD PER FT) S/O (20S-16H90,06SF-06SF-06SF) S/O COUPLER (08H-06S90) HYD PUMP PJ12 15MM KEYED SHAFT HYD PUMP PJ12 15MM KEYED SHAFT ABRASION SLEEVE (1.00" X 21") WORM CLAMP (1/4" TO 5/8")

REMARKS

USE 1 @ 21.00" USE 1 @ 6.25" USE 1 @ 16.00" SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. SEAL KIT 191-413

NOTE:

05

ID0148888

104

RETURN HYDRAULICS ENDS WITH S/N

13

1

10

2

11

6 4 3

4

2 13

4 5

7

12 4

8 9

05

ID0035648

105

RETURN HYDRAULICS ENDS WITH S/N REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13

364-702 159-916 159-917 110-217 116-322 116-881 116-881 155-280 514-169 158-153 158-152 117-607 110-249

QTY

1 2 1 4 1 1 1 1 1 1 1 1 2

DESCRIPTION

HYDRAULIC TANK ELBOW (-06S X -06H90) TEE (-O8H-O6H-O6H) WORM CLAMP (7/16" TO 1") BULK HOSE (1/2",SOLD PER 1") BULK HOSE (3/8", SOLD PER FT) BULK HOSE (3/8", SOLD PER FT) S/O (20S-16H90,06SF-06SF-06SF) S/O COUPLER (08H-06S90) HYDRAULIC PUMP HYDRAULIC PUMP ABRASION SLEEVE (1.00" X 21") WORM CLAMP (1/4" TO 5/8")

REMARKS

USE 1 @ 21.00" USE 1 @ 6.25" USE 1 @ 16.00" SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. SEAL KIT: 191-413

NOTE:

05

ID0035648

106

GEAR PUMP HYDRAULICS BEGINS WITH S/N: A60000443

9

10 15

2 14

16 12 6

8

11

13

8 5

5 3 9 7

10

17

1

4

13

19

3

4

18

05

ID0148970

107

GEAR PUMP HYDRAULICS BEGINS WITH S/N: A60000443 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

158-255 150-1160 157-324 154-838 154-235 154-188 155-280 110-353 159-916 110-217 116-460 159-668 154-322 155-171 116-881 153-110 117-218 117-416 117-387

QTY

1 1 1 1 2 1 1 2 2 2 1 1 2 1 1 1 1 1 1

DESCRIPTION

HYD CONTROL VALVE (3-SPOOL) HYDRAULIC TANK HOSE (08OFX90S-53"-3000) HOSE (08OFX90-44"-3000) CONNECTOR (08S-08O90) S/O COUPLER (16S-16H90) S/O (20S-16H90,06SF-06SF-06SF) WORM CLAMP (3/4" TO 1-1/2") ELBOW (-06S X -06H90) WORM CLAMP (7/16" TO 1") BULK HOSE (1", SOLD PER FT) TANDEM HYDRAULIC PUMP CONNECTOR (08O-10S90) REDUCER (10S-06SF) BULK HOSE (3/8", SOLD PER FT) S/O COUPLER (20S-16H45) ABRASION SLEEVE (1" X 52") ABRASION SLEEVE (1.00" X 50") ABRASION SLEEVE (1.00" X 42")

REMARKS

USE 1 @ 15.00" REPLACED WITH 190-2818 HYD PUMP KIT. SEE FOOTNOTE 1 USE 1 @ 50.00"

NOT SHOWN:

FOOTNOTES:

1. USE SEAL KIT 191-374 FOR 159-668 HYD. PUMP

NOTE:

05

ID0148970

108

GEAR PUMP HYDRAULICS ENDS WITH S/N

9

10

15

14

2 16 1 5 6 8

11 3

7

9 10

17

8

13

12 5 4

4

13 3

19 18

06

ID0035653

109

GEAR PUMP HYDRAULICS ENDS WITH S/N REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

158-255 364-702 157-324 154-838 154-235 155-146 155-280 110-353 159-916 110-217 116-460 159-668 154-322 155-171 116-881 153-110 117-218 117-416 117-387

QTY

1 1 1 1 2 1 1 2 2 2 1 1 2 1 1 1 1 1 1

DESCRIPTION

HYD CONTROL VALVE (3-SPOOL) HYDRAULIC TANK HOSE (08OFX90S-53"-3000) HOSE (08OFX90-44"-3000) CONNECTOR (08S-08O90) S/O COUPLER (12S-16H90) S/O (20S-16H90,06SF-06SF-06SF) WORM CLAMP (3/4" TO 1-1/2") ELBOW (-06S X -06H90) WORM CLAMP (7/16" TO 1") BULK HOSE (1", SOLD PER FT) TANDEM HYDRAULIC PUMP CONNECTOR (08O-10S90) REDUCER (10S-06SF) BULK HOSE (3/8", SOLD PER FT) S/O COUPLER (20S-16H45) ABRASION SLEEVE (1" X 52") ABRASION SLEEVE (1.00" X 50") ABRASION SLEEVE (1.00" X 42")

REMARKS

USE 1 @ 15.00" REPLACED WITH 190-2818 HYD PUMP KIT. SEE FOOTNOTE 1 USE 1 @ 50.00"

NOT SHOWN:

FOOTNOTES:

1. USE SEAL KIT 191-374 FOR 159-668 HYD. PUMP

NOTE:

06

ID0035653

110

COOLER INSTALATION BEGINS WITH S/N

4 3 1 2

9 13 14 11 12 7 6 8

01

10

5

ID0271948

111

COOLER INSTALATION BEGINS WITH S/N REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

159-386 155-910 105-820 324-934 360-336 106-093 106-382 323-758 105-095 324-939 165-923 108-097 170-457 195-1649

QTY

1 1 5 1 1 3 3 3 6 1 1 4 1 1

DESCRIPTION

REMARKS

FILTER HEAD (12SF-12SF) FILTER ELEMENT (1-UNF) FLG LK BOLT (1/4-NC X 3/4") FRAME OIL COOLER SCREW (M6-1.00 X 45MM) FLG LK SCREW (M10-1.50 X 20MM) MOUNT BLOCK (5/16", RUBBER) WASHER (1/4") COOLER MOUNT KEY (1/4 X 2.00) SET SCR 3/8-NC X 1.00" CUP, NYL PULLEY (1.00", .25 KWY-BORE) FAN 10"

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0271948

112

COOLER INSTALLATION ENDS WITH S/N

3

1 2 14

10 3

11

9 12

4 7

04

66

8

5

ID0035656

113

COOLER INSTALLATION ENDS WITH S/N REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

159-386 155-910 105-820 360-336 323-758 105-095 106-093 106-382 325-415 170-457 195-1084 324-939 194-657 108-097

QTY

1 1 5 1 3 6 3 5 1 1 1 1 1 3

DESCRIPTION

FILTER HEAD (12SF-12SF) FILTER ELEMENT (1-UNF) FLG LK BOLT (1/4-NC X 3/4") OIL COOLER MOUNT BLOCK (5/16", RUBBER) WASHER (1/4") SCREW (M6-1.00 X 45MM) FLG LK SCREW (M10-1.50 X 20MM) KOHLER FAN PLATE PULLEY (1.00", .25 KWY-BORE) FAN 10" COOLER MOUNT FAN 10" SET SCR 3/8-NC X 1.00" CUP, NYL

REMARKS

USE 648 LOCTITE CLEAN PU;LLEY WITH ULTRA CLEAN BEGINS WITH S/N L70000610 ENDS WITH S/N L70000607 USE 242 LOCTITE

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0035656

114

COOLER INSTALLATION BEGINS WITH S/N

3 1 2

12 3

12

10 11 9 4

7 6

01

6

8

5

ID0195724

115

COOLER INSTALLATION BEGINS WITH S/N REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12

159-386 155-910 105-820 360-336 323-758 105-095 106-093 106-382 324-939 170-457 194-657 108-097

QTY

1 1 5 1 3 6 3 3 1 1 1 4

DESCRIPTION

FILTER HEAD (12SF-12SF) FILTER ELEMENT (1-UNF) FLG LK BOLT (1/4-NC X 3/4") OIL COOLER MOUNT BLOCK (5/16", RUBBER) WASHER (1/4") SCREW (M6-1.00 X 45MM) FLG LK SCREW (M10-1.50 X 20MM) COOLER MOUNT PULLEY (1.00", .25 KWY-BORE) FAN 10" SET SCR 3/8-NC X 1.00" CUP, NYL

REMARKS

USE 648 LOCTITE CLEAN PU;LLEY WITH ULTRA CLEAN

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0195724

116

HYDRAULIC COMPONENT MOUNTING BEGINS WITH S/N: CMWSK350CE0001211

6 4

8 7

10 11 5

2

9

1 3

05

ID0035657

117

HYDRAULIC COMPONENT MOUNTING BEGINS WITH S/N: CMWSK350CE0001211 REF PART NO. NUMBER

QTY

1 158-255 2 105-085 3 105-224 4 106-382 5 106-383 6 107-661 7 159-668 8 105-826 9 324-938 10 150-4624 11 150-4623

1 3 3 2 4 4 1 2 1 1 1

DESCRIPTION

HYD CONTROL VALVE (3-SPOOL) LOCKNUT (1/4"-NC) BOLT (1/4-NC X 2-1/2") FLG LK SCREW (M10-1.50 X 20MM) FLG LK SCREW (M10-1.50 X 30MM) FLG LKNUT (M10-1.50, PRV TRQ) TANDEM HYDRAULIC PUMP FLG LK BOLT (3/8-NC X 1") VALVE MOUNT HYD PUMP PK12, L OPTION, 15MM KEY, LEFT HYD PUMP PK12, L OPTION, 15MM KEY, RIGHT

REMARKS

REPLACED WITH 190-2818 HYD PUMP KIT. SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. SEAL KIT: 191-413 2. USE SEAL KIT 191-374 FOR 159-668 HYD. PUMP 3. USE 256-666 TO LUBRICATE SPLINE SHAFT WHEN SERVICING 256-034

NOTE:

05

ID0035657

118

HYDRAULIC CYLINDERS (2.0" X 1.25") 1

6

5

7 8 4 9 3

10

2 03

ID0015652

119

HYDRAULIC CYLINDERS (2.0" X 1.25") REF PART NO. NUMBER

QTY

1 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

CYL (2.0 X 1.25 X 2.0) CYLINDER BARREL (2.0 X 2.0) CYLINDER ROD (1.25 X 2.0) CYL (2.0 X 1.25 X 2.5) CYLINDER BARREL (2.0 X 2.5) CYLINDER ROD (1.25 X 2.5) CYL (2.0 X 1.25 X 3.0) CYLINDER BARREL (2.0 X 3.0) CYLINDER ROD (1.25 X 3.0) CYL (2.0 X 1.25 X 4.0) CYLINDER BARREL (2.0 X 4.0) CYLINDER ROD (1.25 X 4.0) CYL (2.0 X 1.25 X 5.0) CYLINDER BARREL (2.0 X 5.0) CYLINDER ROD (1.25 X 5.0) CYL (2.0 X 1.25 X 6.0) CYLINDER BARREL (2.0 X 6.0) CYLINDER ROD (1.25 X 6.0) CYL (2.0 X 1.25 X 8.0) CYLINDER BARREL (2.0 X 8.0) CYLINDER ROD (1.25 X 8.0) CYL (2.0 X 1.25 X 10.0) CYLINDER BARREL (2.0 X 10.0) CYLINDER ROD (1.25 X 10.0) CYL (2.0 X 1.25 X 12.0) CYLINDER BARREL (2.0 X 12.0) CYLINDER ROD (1.25 X 12.0) CYL (2.0 X 1.25 X 16.0) CYLINDER BARREL (2.0 X 16.0) CYLINDER ROD (1.25 X 16.0) CYL (2.0 X 1.25 X 20.0) CYLINDER BARREL (2.0 X 20.0) CYLINDER ROD (1.25 X 20.0)

3 4 5 6 7 8 9 10

150-770 150-778 150-771 106-097 157-022 155-732 157-541 157-538

1 1 1 1 1 1 1 1

CYLINDER HEAD (2.0 X 1.25) LOCK RING (2.0) CYLINDER PISTON (2.0 X 1.25) FLG BOLT (5/8-NC X 1-3/4",GD8) O-RING (224 D90) BACKUP RING (224 D90) U-SEAL (1.250") WIPER SEAL (1.250")

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

REMARKS

DESCRIPTION

149-669 152-029 153-012 149-670 149-761 153-005 149-671 150-282 150-435 149-672 150-290 150-415 151-060 150-291 150-423 149-673 150-294 150-438 151-057 150-285 150-427 149-674 152-017 149-730 151-032 150-286 150-418 151-091 152-027 150-448 151-065 152-011 150-439

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

.

INCL MOLDED-ON WEAR RING SEE FOOTNOTE 3

NOT SHOWN:

259-100 259-236 259-239 259-241 259-188

U-SEAL INSTALLER (1" - 1.499") WIPER INSTALLER (1.25") WIPER/SEAL INSTALLER (2") PISTON INSTALLER (2") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. REF. #1 & #2 ARE SPECIFIC TO EACH CYLINDER, REF. #3 THRU #10 ARE COMMON FOR ALL THE ABOVE LISTED CYLINDERS. 2. SEAL KIT P/N: 190-169 3. APPLY LOCTITE 277 OR EQUIVALENT, TORQUE TO 180-200 FT-LBS NOTE:

03

ID0015652

120

HYDRAULIC CYLINDERS (2.5" X 1.25")

1

6 11 12

13 5

7 8 4 9 3 10

2

02

ID0015846

121

HYDRAULIC CYLINDERS (2.5" X 1.25") REF PART NO. NUMBER

QTY

1 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

CYL (2.5 X 1.25 X 2.0) CYLINDER BARREL (2.5 X 2.0) CYLINDER ROD (1.25 X 2.0) CYL (2.5 X 1.25 X 2.5) CYLINDER BARREL (2.5 X 2.5) CYLINDER ROD (1.25 X 2.5) CYL (2.5 X 1.25 X 3.0) CYLINDER BARREL (2.5 X 3.0) CYLINDER ROD (1.25 X 3.0) CYL (2.5 X 1.25 X 4.0) CYLINDER BARREL (2.5 X 4.0) CYLINDER ROD (1.25 X 4.0) CYL (2.5 X 1.25 X 5.0) CYLINDER BARREL (2.5 X 5.0) CYLINDER ROD (1.25 X 5.0) CYL (2.5 X 1.25 X 6.0) CYLINDER BARREL (2.5 X 6.0) CYLINDER ROD (1.25 X 6.0) CYL (2.5 X 1.25 X 8.0) CYLINDER BARREL (2.5 X 8.0) CYLINDER ROD (1.25 X 8.0) CYL (2.5 X 1.25 X 10.0) CYLINDER BARREL (2.5 X 10.0) CYLINDER ROD (1.25 X 10.0) CYL (2.5 X 1.25 X 12.0) CYLINDER BARREL (2.5 X 12.0) CYLINDER ROD (1.25 X 12.0)

3 4 5 6 7 8 9 10 11 12 13

150-773 150-779 150-776 106-097 500-031 157-021 157-541 157-538 125-775 157-535 157-019

1 1 1 1 1 1 1 1 1 1 1

CYLINDER HEAD (2.5 X 1.25) LOCK RING (2.5) CYLINDER PISTON (2.5 X 1.25) FLG BOLT (5/8-NC X 1-3/4",GD8) O-RING (228 D90) BACKUP RING (228 D90) U-SEAL (1.250") WIPER SEAL (1.250") WEAR RING BACKUP RING (139 D90) O-RING (139 D90)

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

REMARKS

DESCRIPTION

151-101 152-034 153-012 151-084 152-022 153-005 151-055 152-005 150-435 151-028 150-283 150-415 149-797 149-810 150-423 151-061 152-010 150-438 151-045 150-295 150-427 149-675 150-692 149-730 151-180 152-015 150-418

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

.

SEE FOOTNOTE 3

NOT SHOWN:

259-100 259-236 259-242 259-243 259-188

U-SEAL INSTALLER (1" - 1.499") WIPER INSTALLER (1.25") PISTON SEAL INSTALLER (2.5") PISTON INSTALLER (2.5") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. REF. #1 & #2 ARE SPECIFIC TO EACH CYLINDER, REF #3 THRU #13 ARE COMMON FOR ALL THE ABOVE LISTED CYLINDERS. 2. SEAL REPAIR KIT P/N: 190-166 3. APPLY LOCTITE 277 OR EQUIVALENT, TORQUE TO 180-200 FT-LBS

NOTE:

02

ID0015846

122

HYDRAULIC CYL. (2.5 X1.25 X 10.0)

1

6

11 13

12 5

7 8 4 9 10

3

2

04

ID0162445

123

HYDRAULIC CYL. (2.5 X1.25 X 10.0) REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13

300-2742 150-692 300-2736 150-773 150-779 300-2741 106-098 500-031 157-021 157-541 157-538 125-775 157-535 157-019

QTY

1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

HYDRAULIC CYL. (2.5 X 1.25 X 10.0) CYLINDER BARREL (2.5 X 10.0) CYLINDER ROD (1.25 X 10.0) CYLINDER HEAD (2.5 X 1.25) LOCK RING (2.5) CYLINDER PISTON (2.5 X 1.25) FLG BOLT (3/4-NC X 2", GD8) O-RING (228 D90) BACKUP RING (228 D90) U-SEAL (1.250") WIPER SEAL (1.250") WEAR RING BACKUP RING (139 D90) O-RING (139 D90)

REMARKS

SEE FOOTNOTE1

SEE FOOTNOTE 2

NOT SHOWN:

259-100 259-236 259-242 259-243 259-188

U-SEAL INSTALLER (1" - 1.499") WIPER INSTALLER (1.25") PISTON SEAL INSTALLER (2.5") PISTON INSTALLER (2.5") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. SEAL REPAIR KIT P/N: 190-2326 2. APPLY LOCTITE 277 OR EQUIVALENT. TORQUE TO 290-325 FT-LBS

NOTE:

04

ID0162445

124

NOTES:

ID0134963

125

ELECTRICAL

SEE TECHNICAL SUPPLEMENT FOR FURTHER ELECTRICAL INFORMATION

ID0134878

126

NOTES:

ID0134963

127

MISCELLANEOUS

ID0135063

128

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

129

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

130

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

131

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

132

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which are D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

133

134

SK350 Related Publications Component

Ass’y

P/N

Model: SK350 .................... Operators Manual ............................................................ .............. 053-149 SK350 .................... Repair Guide (Service Manual) ....................................... .................. N/A SK350 .................... Technical Supplement ..................................................... .............. 053-153 Engine: Kohler .................... Parts Manual 194-571, 195-1600….. ……… (053-040) www.kohlerplus.com Kohler .................... Operation Manual……………………….. ………………… (054-040) 053-2444 Kohler .................... Service Manual …………………………………..………… (055-040) 053-2445

Filters Engine: Air Filter Element-Primary……...................................................................................... 194-648 Air Filter Element-Secondary……................................................................................. 194-649 Oil Filter…………………………..................................................................................... 157-630 Fuel Filter…………………………................................................................................... 155-941 Hydraulic Oil Filter: Filter Element (1-UNF) ..................................................................................................... 155-910

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ............................................. 190-051 O-ring Repair Kit - Field Service (46 different O-rings) .................................................... 190-052

VER.03

ID0096427

135

ID0040564

136

ID0135281