Ditch Witch RT95 Powershift Tractor Parts Manual 053-122 PDF

RT95 Powershift

Parts Manual

Issue 12

053-122

1

RT95 Powershift ISSUE NO. 12 PL-9/17 For Replacement Copy Order P/N 053-122 This product and its use may be covered by one or more patents at http://patents.charlesmachine.works.

This manual contains information concerning the following models: RT95 Powershift Tractor

Copyright 2001, 2002, 2004, 2005, 2006, 2007, 2008, 2011, 2013, 2014, 2017 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Jet Trac, Roto Witch, Subsite, Fluid Miser, Power Pipe, Super Witch, Pierce Arrow, Zahn, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication. However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration reference numbers. ♦ Have equipment model and serial number on hand to help ensure you get the right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 04

ID0128552

4

WARRANTY _________________________ DW WARRANTY Policy August, 2016

POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse, abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part

by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 05

ID0134872

5

CONTENTS______________________ Decals Decal Location - RT95 ................................ 8 Engine Components Cold Start Kit ............................................ 26 Engine, John Deere – Service .................... 16 Engine, John Deere ................................. 14 Muffler Guard Kit ..................................... 22 Muffler Support ....................................... 20 Muffler/Air Filter........................................ 18 Radiator Support Kit ................................. 28 Radiator/ Split Cooler ............................... 24 Power Train Axle – Axle Housing Rigid ............................ 60 Axle – Axle Housing Steerable ....................... 48 Axle – Bevel Gear / Pinion Set ........................ 42 Axle – Differential Lock ................................. 50 Axle – Differential Rigid ................................ 52 Axle – Differential Steerable .......................... 54 Axle – Double Joint Steerable ........................ 44 Axle – Reduction Gears ................................ 64 Axle – Swivel Housing / Steering Cylinder ........ 46 Axle – Wheel Hub / Reduction Gear ................. 56 Axle – Wheel Hub Rigid ............................... 62 Brake Caliper – Powershift .......................... 70 Brake Caliper – Service.............................. 72 Brake Kit .................................................. 80 Differential Mount, Tilt Frame................. 38, 40 Differential................................................ 36 Park Brake ............................................... 78 Powershift Drive Line ............................... 66 Powershift Transmission .......................... 32 Rear Steer Axle Sensor ........................... 58 Service Brake System ........................ 74, 76 Tire/Wheel – 38 x 18-20 E10TL..................... 68 Transfer Case .......................................... 34 Frame Components 4-Post ROPS ......................................... 118 Air Conditioning Kit ................................ 128 Backfill Blade Assembly ........................ 116 Battery Installation ................................. 104 Cab Heater Assembly ............................ 124 Cab Kit ........................................... 120, 122 Canopy & Light Kit ................................. 130 Counterweight/Grille .......................... 94, 96 Engine Enclosure ..................................... 86 Fender and Covers ................................. 88 Front Counterweight ................................ 84

Fuel Tank ............................................... 106 Gauge Cluster ........................................ 102 Hydraulic Reservoir ................................ 110 Seat Platform ......................................... 112 Seat Swivel & Base ................................ 114 Sound Blankets ...................................... 132 Tape Dispenser ...................................... 134 Tilt Steering ............................................. 98 Trench Depth Meter Module ..................... 90 Trench Depth Meter/Odometer Mount ...... 92 Control Components BFB Controls .......................................... 146 BFB Cylinder Guard ............................... 154 Throttle, Foot ...................................... .. 142 Ground Speed Direction Hand Cntrl ... .. 138 Throttle, Hand ..................................... ..140 Hydrostatic Pump Linkage.............. 150, 152 Powershift Lever .................................... 144 Rear Steer Control Kit ............................ 148 Hydraulics *See Technical Supplement for further Hydraulic Information ................. #053-127 Auxiliary Drive Lubrication ...................... 164 Auxiliary Hydraulics ................................ 162 Backfill Blade Hydraulics ...................... 168 Backfill Blade Valve ................................ 170 Control Valve – 3 spool upper ................... 180 Cylinder – 2’’ x 1.25’’ x 8’’ ........................... 184 Cylinder – 2’’ x 1’’ x 3.38’’ ........................... 182 Cylinder – 3’’ x 1.75’’ x 8’’ ........................... 186 Frame Tilt ............................................... 176 Ground Drive Motor ............................ .. 166 Hydraulic Filter ....................................... 158 No Frame Tilt/No Rear Steer Option ...... 178 Power Steering Valve ............................. 172 Powershift Manifold ................................ 160 Rear Steer.............................................. 174 Electrical *See Technical Supplement for further Electrical Information.................. #053-127

ID0135124

6

CONTENTS______________________ Miscellaneous Bolt/Nut Torque Chart ............................ 192 Filters ..................................................... 196 Optional Kits .......................................... 196 Parts Manual Change Request ............. 197 Related Publications .............................. 196 Replacement O-Ring Chart .................... 195 Warranty Registration ........................... 200

ID0135124

7

DECALS

ID0135069

8

DECAL LOCATION RT95

41 21 40

5

4

28 10 13 43

39

14

1 32

29 39 25

26

17

35 15

19

43 36

08

ID0093468

9

DECAL LOCATION RT95

9

34

11

12 3 19

17

6 18

31 37

27 19 29 17 2

08

10

ID0093468

10

DECAL LOCATION RT95

33 23

4.50”

20

7.00”

2.25”

2.00”

42 8 7

.75”

.75”

1.00”

1.00”

24 30

29

6.00”

2.00”

BATTERY DOOR 2.00”

29

22 1.00” .50” 2.00”

1.00”

16

08

ID0093468

11

DECAL LOCATION RT95 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

275-921 275-922 273-092 700-151 273-263 273-213 273-094 273-095 273-100 275-400 273-102 273-262 273-103 273-104 270-1268 273-108 273-109 273-490 273-491 273-246 273-455 274-291 274-318 274-375 274-442 274-724 275-361 275-033 273-475 275-070 700-064 275-120 275-148 273-452 275-185 275-303 275-497 270-5127 273-197 273-239 270-1023 273-267 700-062 700-063 273-292 273-458 273-449 273-496 270-2027

QTY

DESCRIPTION

1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 4 1 2 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 4

DECAL KIT - RT95H DECAL KIT - RT95M GROUND DRIVE CONTROL GROUND DRIVE CONTROL 1 AND 2 SHIFT MOBILE-WORK AXLE LOCK/AUXILIARY STEER/TILT/THROTTLE BFB FUNCTIONS NOTICE OIL LEVEL REEL CARRIER/COLD START REEL CARRIER/COLD START HORN/ROTOWITCH/IGNITION FUSE PANEL DITCH WITCH LOGOTYPE DITCH WITCH-ID TEST PORTS RT95 MODEL ID STRIPE LEFT RT95 MODEL ID STRIPE RIGHT RIGID LOGO PLACARD LUBRICATION CHART SOUND POWER TIE DOWN LOCATION MASTER DISCONNECT SWITCH LIFT LOCATION WARNING ONE CALL NOTIFICATION PARKING BRAKE NOTICE ELECTRICAL SYSTEM WARNING READ MANUAL WARNING RUNAWAY POWER BEYOND/RETURN/PRESSURE RESERVOIR (THF) FUEL TANK (DIESEL) NOTICE COOLANT WARNING SINGLE OPERATOR WARNING ROLLOVER OIL DRAIN-ID BATTERY OVERHEAD CONSOLE RELAY PANEL NOTICE HYDRAULIC OIL LEVEL DITCH WITCH BATTERY DIESEL FUEL CAP HYDRAULIC OIL CAP FRAME NOSE CASTING WEIGHT EDT CRUISE CONTROL OVERLAY NOTICE ENGINE SPEED TIRE PRESSURE LABEL

REMARKS

SEE FOOTNOTE 3 RT95H RT95M

RT95H RT95M

OLD STYLE - SEE FOOTNOTE 1 RT95H

SEE FOOTNOTE 1

SEE FOOTNOTE 2

SEE FOOTNOTE 1 RT95H; SEE FOOTNOTE 3 RT95M

FOOTNOTES

1. NOT PART OF KIT. 2. 273-197 NOT PART OF KIT. PROVIDED IN CANOPY AND LIGHT KIT 600-382 3. NOT PART OF KIT. PROVIDED IN CRUISE CONTROL KIT 604-968.

08

ID0093468

12

NOTES:

ID0134963

13

ENGINE COMPONENTS

ID0134845

14

JOHN DEERE ENGINE

19

33 24

40

31

35

18

21

34 39

12 28

16 41

43

44

42 1 9 8

7 38 26 27 45 22

32 30

25 11

24

19

6 4

29

23

5 17 14

10

4

13

24

24 36

11

2

20

3

15

37

ID0024300

15

JOHN DEERE ENGINE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

QTY

194-511 1 154-324 1 149-624 1 110-353 2 116-044 AR 153-160 1 215-1203 1 217-565 1 217-247 1 107-009 1 337-369 1 184-427 1 116-946 2 159-625 1 106-709 2 106-527 2 310-599 1 178-358 1 107-002 2 106-643 2 156-277 1 106-545 2 107-723 2 106-266 9 107-001 4 106-336 2 105-475 2 156-276 1 323-365 1 323-634 1 324-592 1 106-382 4 315-534 1 106-124 1 194-478 106-386 2 106-989 2 156-228 1 106-396 1 156-275 1 307-068 1 307-069 1 106-640 2 106-385 2 115-180 1

DESCRIPTION

REMARKS

ENGINE - DEERE DIESEL CAP (10OF) BK S/O COUPLER (10O-10H) WORM CLAMP (3/4" TO 1-1/2") BULK HOSE (5/8", SOLD PER 1") S/O COUPER (18M-10H45) SENDER, OIL PRESSURE (0-80psi) SD TEMPERATURE SENDER 100 - 280 F WATER TEMPERATURE ADAPTER FLG LK SCREW (M12-1.75 X 25MM) FRONT ENGINE BRACKET BOSS ENGINE SHOCK MOUNT FUEL FILTER HOSE (06O) FLG LK NUT (M12-1.75) SCREW (M14-2.00 X 50mm) MOUNT SLEEVE FLG LK SCREW (M10-1.50 X 30mm) SCREW (M16-2.00 X 25mm, SOC) COMPRESSION NUT (05T) LOCKNUT (M16-2.0,PRV TRQ,10.9) SCREW (M16-2.00 X 70mm, SOC) FLG NUT (M10-1.50) FLG LK SCREW (M10-1.50 X 25mm) SCREW (M12-1.75 X 90mm) WASHER (1/2") FERRULE (05T) FILTER MOUNT SUPPORT FILTER MOUNT BRACKET FLG LK SCREW (M10-1.5 X 20mm) FILTER MOUNT SCREW (M10-1.50 X 110mm) ENGINE OIL FILTER FLG LOCKNUT (M8-1.25) FLG LK SCREW (M8-1.25 X 35mm) ELBOW (02NF-02NF90) WASHER (M10, HARDENED) TUBE CONNECTOR (04H-05T) CABLE BRACKET LEVER BRACKET SCREW (M6-1.00 X 20MM, BUT SOC) FLG LOCKNUT (M6-1.00) ALL THREAD (1/8-NPT)

OBSOLETE

USE 1 @ 5.75"

POSITION METAL FACE TO FRAME BOTTOM

MECHANICAL UNITS ONLY

NOT SHOWN:

FOOTNOTES:

11

ID0024300

16

JOHN DEERE ENGINE SERVICE

1

2

4

6 5

3

7 8 10

04

9

ID0024304

17

JOHN DEERE ENGINE SERVICE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

194-511 194-478 499-944 170-371 217-450 194-052 194-521 106-090 106-564 194-588 159-255

DESCRIPTION

REMARKS

1 1 1 1 1 4 4 1 1

ENGINE - DEERE DIESEL ENGINE OIL FILTER OIL FILTER SEAL RING FAN BELT ALTERNATOR 65 AMP (REMAN) FAN SPACER 21.8" METAL BLADE PULLER FAN LOCK WASHER (M10) SCREW (M10-1.50 X 100MM) PRIMARY FUEL FILTER FUEL FILTER

OBSOLETE

1 1 1 1 2 1

JOHN DEERE TIER II OPER MANUAL STARTER THERMOSTAT GASKET, THERMOSTAT WHEEL SPEED SENSOR SPEED SENSOR O-RING DIODE HARNESS

QTY

NOT SHOWN:

054-087 194-254 194-501 165-883 213-080 159-586 213-085

FOOTNOTES:

NOTE:

04

ID0024304

18

19

20

MUFFLER SUPPORT RT115 - RT95H - HT115

4

25

23

3 10

24

13

6

27

26

28

9 29

29

30

5

12

2

11

29

5

7

W/ AIR CONDITIONING

14

15 8 1

16

17

20

21

22

18

21

19

TIER 1 07

ID0002135

21

MUFFLER SUPPORT RT115 - RT95H - HT115 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

191-368 194-370 320-494 194-201 196-351 106-719 105-003 105-827 107-001 320-932 111-136 105-873 105-823 105-562 116-461 325-634 115-704

QTY

1 1 1 1 2 2 4 4 1 2 2 4 2 1 1 1

DESCRIPTION

MUFFLER SUPPORT KIT ENGINE ASSY FRONT SUPPORT MUFFLER EXHAUST TUBE (4" X 12") CLIP NUT (3/8-NC) FLG LOCKNUT (5/16-NC) FLG LK BOLT (3/8-NC X 1-1/4") FLG LK SCREW (M10-1.50 X 25MM) MUFFLER MOUNT PLATE MOUNTING CLAMP FLG LK BOLT (5/16-NC X 1") FLG LK BOLT (5/16-NC X 3/4") FLG BOLT (5/16-NC X 1-3/4") BULK EDGE (3/8", SOLD PER FT) RADIATOR MOUNT BULK EDGE (1/4", SOLD PER 1")

191-428 17 320-175 18 320-738 19 117-978 20 194-121 21 110-170 22 117-852

AIR INTAKE CONVERSION KIT 1 INLET MOUNT 1 RIGHT SIDE PANEL W/ AIR INTAKE 1 BULK EDGE(3/16 W/ 1" BULB) 1 AIR CLEANER ASSEMBLY 2 WORM CLAMP (4-1/8" TO 5") 1 INTAKE ELBOW (4.5")

190-1181 23 300-1576 24 320-932 25 111-136 26 106-719 27 105-866 28 105-827 29 107-001 30 116-461

- MUFFLER AND COMPRESSOR MOUNT 1 MUFFLER AND COMPRESSOR MOUNT 1 MUFFLER MOUNT PLATE 2 MOUNTING CLAMP 2 CLIP NUT (3/8-NC) 2 FLG LK BOLT (5/16-NC X 1.250") 2 FLG LK BOLT (3/8-NC X 1-1/4") 5 FLG LK SCREW (M10-1.50 X 25MM) 12 BULK EDGE (3/8", SOLD PER FT)

REMARKS

INCLUDES REF NO.,S 2, 5, 7 - 11 & 14 OBSOLETE, EXHAUST ELBOW AND FAN MOUNT NOT PART OF KIT NOT PART OF KIT NOT PART OF KIT INCLUDED WITH MOUNTING CLAMP 111-136

SHAPE TO FIT MUFFLER INCLUDED WITH MOUNTING CLAMP 111-136 INCLUDED WITH MOUNTING CLAMP 111-136 USE 12" SEE FOOTNOTE 2 USE 1 @ 7" INCL'S REF. NO'S 17-22 & SEE FOOTNOTE 1

FOR UNITS WITH AIR CONDITIONING

FOOTNOTES:

1. 191-428 AIR-INTAKE CONVERSION KIT ONLY USED ON RT115 TIER 1 UNITS. 2. REF #15 (325-634) FOR USE ON RT115/HT115 ONLY. SEE PAGE ENTITLED "RADIATOR/OIL COOLER (TIER 2) FOR REFERANCE.

NOTE:

07

ID0002135

22

MUFFLER GUARD KIT (RT/HT115 & RT95) 4

7 5 3

1

2

5 3

5 6 C

808-758

23

MUFFLER GUARD KIT (RT/HT115 & RT95) REF PART NO. NUMBER

1 2 3 4 5 6 7

191-308 194-201 320-491 111-136 196-351 105-823 105-562 105-003

QTY

DESCRIPTION

MUFFLER GUARD KIT (RT115) 1 MUFFLER 1 MUFFLER GUARD 2 MOUNTING CLAMP 1 EXHAUST TUBE (4" X 12") 6 FLG LK BOLT (5/16-NC X 3/4") 2 FLG BOLT (5/16-NC X 1-3/4") 2 FLG LOCKNUT (5/16-NC)

REMARKS

INCLUDES REF. NO.'S 2 & 3

INCLUDES REF. NO.'S 5, 6 & 7 SEE FOOTNOTE 1

FOOTNOTES

1. MOUNTING CLAMP NEEDS TO BE SHAPED TO FIT MUFFLER..

NOTE:

C

808-758

24

RADIATOR / SPLIT COOLER 7

26

10 12

34 34

10

22

12 24

22

35 28 13

11

23 16

9

17 16

14 22 33 29 27 28 36 32 4 20 33 31 38

1 19

15

37

15

30

19

17

21

25

22

3 16 21

6 6 16 16

11 18 19

9 11

8

16 2 11 13 5

06

ID0024309

25

RADIATOR / SPLIT COOLER REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

QTY

194-283 1 194-115 1 194-114 1 115-059 1 115-058 1 116-128 2 110-549 1 365-494 2 106-709 4 107-135 2 107-001 16 106-992 2 110-134 4 116-108 AR 106-998 2 106-266 18 106-999 6 323-203 1 116-978 AR 106-162 1 116-107 AR 110-249 4 110-259 2 364-638 1 117-339 1 111-084 1 106-386 1 155-162 2 514-285 1 153-160 1 116-750 AR 115-286 1 110-217 2 155-164 2 116-108 12 110-333 1 502-046 1 117-819 2

DESCRIPTION

RADIATOR/OIL COOLER LEFT SIDE FAN SHROUD RIGHT SIDE FAN SHROUD UPPER COOLANT HOSE LOWER COOLANT HOSE SHOCK MOUNT SIGHT GAUGE (12N) RADIATOR ROD FLG LK NUT (M12-1.75) CLIP NUT (M8-1.25) FLG LK SCREW (M10-1.50 X 25mm) FLG LK SCREW (M8-1.25 X 25mm) WORM CLAMP (2.062" TO 2.750") BULK HOSE (5/16", SOLD PER 1") FLG LK SCREW (M10-1.50 X 70mm) FLG NUT (M10-1.50) FLG LK SCREW (M10-1.50 X 20mm) AIR BARRIER BULK EDGE (1/4", SOLD PER FT) FLG SCREW (M8-1.25 X 20MM) BULK STRIP (1.2", SOLD PER 1") WORM CLAMP (1/4" X 5/8") BOLT-ON CLAMP (.625") PRESSURE TANK AIR BARRIER RADIATOR CAP (16 PSI) FLG LOCKNUT (M8-1.25) S/O COUPLER (04N-05H) S/O COUPLER (08N-10H90) S/O COUPLER (18M-10H45) BULK HOSE (5/8", SOLD PER 1") REDUCER (08N-1/4-NF) WORM CLAMP (7/16" X 1") S/O COUPLER (04N-05H90) BULK HOSE (5/16", SOLD PER 1") BOLT-ON CLAMP (1") GROMMET (3/4) FLAP

REMARKS

USE 1@ 24"

65", SEE FOOTNOTE 3 USE 2 @ 11"

SEE FOOTNOTE 1 USE 1@ 22.5" SEE FOOTNOTE 2

USE 1@ 12"

NOT SHOWN:

FOOTNOTES:

1.

2.

3.

CONNECTS INTO ENGINE WATER PUMP CONNECTS INTO ENGINE CYLINDER HEAD REF 19 (116-978) USES THREE PIECES, TWO @ 25" & ONE @ 15".

NOTE:

06

ID0024309

26

COLD START KIT

8

SEE FOOTNOTE 2

10 11 5 11

2 6 9 1

3

BLK

10

WHT/BLU TO FRAME HARNESS

05

4 7

ID0024283

27

COLD START KIT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

QTY

191-366 195-843 1 156-204 156-205 323-382 1 215-073 1 215-590 1 306-628 1 156-018 AR 106-654 1 110-169 1 156-272 1 156-204 156-205 106-386 6 106-991 6

DESCRIPTION

REMARKS

COLD START KIT INJECTOR NOZZLE (CLDSTRT) FERRULE (02T) COMPRESSION NUT (02T) BRACKET SENSOR SWITCH RING TERMINAL (.375") VALVE/CANISTER BRACKET BULK TUBING (1/8", SOLD PER 1") FLG LK SCREW (M10-1.50 X 16mm) WORM CLAMP (2.812" TO 3.750") TUBE CONNECTOR (02N-02T90, ORF) FERRULE (02T) COMPRESSION NUT (02T) FLG LK NUT (M8-1.25) FLG LK SCREW (M8-1.25 X 20mm)

INCL REF NO.S 1-12 & 306-607 & 306-608

SEE FOOTNOTE 1 SEE FOOTNOTE 1 USE 1@ 7"

NOT SHOWN:

306-607 306-608

1 1

HORN BUTTON BUTTON COVER

FOOTNOTES:

1.

2.

REF NO.'S 3 & 4 BOLT ONTO ENGINE WITH ALTERNATOR ELECTRICAL HARNESS. USE OF 8 OZ. ETHER CANISTER IS REQUIRED, WHICH WILL COME WITH SEALS AND FOAM.

NOTE:

05

ID0024283

28

RADIATOR SUPPORT KIT RT95

5

4 2

1

4 3 6

5

7

( 1 ) ( 2 )

( 3 )

1:2

02

ID0156377

29

RADIATOR SUPPORT KIT RT95

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7

1 2 2 4 4 2 2

300-1172 116-128 105-975 105-118 106-266 106-997 107-001

DESCRIPTION

RADIATOR SUPPORT BRACKET SHOCK MOUNT WASHER (3/4") WASHER (3/8") FLG NUT (M10-1.50) FLG LK SCREW (M10-1.50 X 60MM) FLG LK SCREW (M10-1.50 X 25MM)

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

190-1082

RADIATOR SUPPORT KIT

INCLUDES REF 1 THRU 7

FOOTNOTES:

1. AUXILIARY VIEW SHOWS PROPER INSTALLATION OF SHOCK MOUNT (116-128) & WASHER (105-975).

NOTE:

02

ID0156377

30

NOTES:

ID0134963

31

POWER TRAIN

ID0135064

32

POWERSHIFT TRANSMISSION RT95M

21 22 22

17

TO UPPER OUTSIDE COOLER PORT

19 28

23

FOOTNOTE 3

25

8

11

26

11

18

23 24

10 27

24

15

16

22 2

17

12 12

25

13

3

14

13 14

3

22

11

5

11

6

7 20

16 15

9 12

12

13

13 14

TO LOWER OUTSIDE COOLER PORT

1 4 5

14

6 5

29

08

ID0024289

33

POWERSHIFT TRANSMISSION RT95M

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

QTY

DESCRIPTION

166-542 1 TRANSMISSION (2-SPD) 159-509 - OIL FILTER 106-383 12 FLG LK SCREW (M10-1.50 X 30mm) 166-519 1 TORQUE CONVERTER (1.93 NEEDLE) 166-252 - DRIVE PLATE 105-032 6 BOLT (3/8-NC X 3/4 ") 107-505 - BEVELED WASHER (M8) 117-324 1 ABRASION SLEEVE (1.25" X 48") 166-193 - GROUND DRIVE TRANSMISSION 306-971 1 RIGHT REAR TRANSMISSION MOUNT 306-972 1 LEFT REAR TRANSMISSION MOUNT 105-386 4 BOLT (5/8-NC X 4-1/2") 116-151 4 SHOCK MOUNT 105-416 4 WASHER (5/8") 105-994 4 FLG LOCKNUT (5/8-NC) 107-572 4 SCREW (M14-1.50 X 40mm) 105-071 4 WASHER (1/2") 149-790 2 S/O COUPLER (M22-1.50-10H90XL) 116-044 AR BULK HOSE (5/8", SOLD PER 1") 116-044 AR BULK HOSE (5/8", SOLD PER 1") 149-811 1 S/O COUPLER (16S-10H) 149-596 1 S/O COUPLER (16S-10H90) 110-026 4 WORM CLAMP (1/2" TO 1-1/4") 105-678 2 SCREW (M12-1.75 X 140mm, SOC) 106-707 4 SCREW (M12-1.75 X 45mm, SOC) 106-397 6 WASHER (M12, HARDENED) 157-311 1 QDC ADAPTER (02-04H) 107-893 2 DOWELL PIN (16mm X 32mm) 117-691 1 ABRASION SLEEVE (1.25" X 68") 105-2013 6 BOLT (3/8-24NF X 1/2") GD 8 160-1338 FLEXPLATE ALIGNMENT TOOL

REMARKS

SEE FOOTNOTE 3 & NOT SHOWN FOR SERVICE PARTS. SEE FOOTNOTE 1

SEE FOOTNOTE 1. TORQUE TO 30 FT-LB. SEE FOOTNOTE 2 SEE FOOTNOTE 1

SEE FOOTNOTE 1

SEE FOOTNOTE 1

USE 1@ 80" USE 1@ 70"

SERVICE PART ONLY SERVICE PART ONLY SEE FOOTNOTE 1. TORQUE TO 30 FT-LB. SEE FOOTNOTE 5

NOT SHOWN:

500-1528 1 500-2076 4 500-2077 1 500-2078 1 500-2086 1 111-151 1 213-293 1

SHIFT SOLENOID CLUTCH KIT DISTRIBUTOR SEAL KIT TRANSMISSION GASKET KIT SEAL, REAR MAIN TRANSMISSION DIPSTICK TRANSMISSION TEMP SWITCH

FOOTNOTES:

1.

2.

3.

4.

5.

USE LOCTITE NO. 242 OR ITS EQUIVALENT USE BEVELED WASHER TO PREVENT CRACKING DRIVE PLATE REF #4.

REPLACEMENT FOR INPUT SHAFT SEAL 500-2022.

APPLY NEVER SEIZE TO INPUT SHAFT SPLINES. REQUIRED TO ALIGN FLEXPLATE TO TORQUE CONVERTER.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

08

ID0024289

34

TRANSFER CASE

31

T ON FR

23

10

43 3 28

8 11 4

13

45

26

1

2

1

SEE VIEW 1

7

3

5 6 14

33 31

41

32

39 30

38

35

38

28

38

29

28

27

9

15

40 26

40

11

15

40

37

39

21

42

18 19 20

34 13 16

38

17

22 30

42

12

36

28

39

24 21 4

39 17 30

39 13

19 20 16 18

17

25 44

11 30

VIEW 1

03

ID0090462

35

TRANSFER CASE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

QTY

166-193 125-384 2 125-383 1 361-934 1 361-578 4 165-564 1 125-171 1 126-031 1 168-062 1 167-355 1 165-585 1 105-827 4 125-168 1 156-984 3 115-211 3 156-982 2 125-045 2 107-503 2 185-198 2 185-199 2 165-562 2 125-170 2 167-350 1 159-003 1 165-565 1 182-226 1 125-040 2 165-584 1 125-049 4 167-349 1 106-555 15 106-866 2 167-348 1 125-378 1 167-356 1 165-586 1 165-563 1 165-561 1 155-878 4 106-396 18 125-175 3 157-501 1 107-502 3 514-123 1 307-458 1 320-647 1

DESCRIPTION

GROUND DRIVE TRANSMISSION BEARING RACE (1.375") NEEDLE BEARING (1.375") SHIFT YOKE SHIFT PADDLE SHIFT COLLAR (UPPER) NEEDLE BEARING NEEDLE BEARING (1.375") IDLER GEAR SHIFT SHAFT DROP BOX HOUSING FLG LK BOLT (3/8-NC X 1-1/4") ROLLER BEARING SEAL PLUG (O8N,SQ,MAG) O-RING BALL BEARING (1.771") THRUST WASHER (45mm) BEARING BEARING OUTPUT GEAR THRUST WASHER (2.000") OUTPUT SHAFT AIR VENT (02N) SHIFT COLLAR (LOWER) SHIFT YOKE BALL BEARING (1.968") CROWD PINION BALL BEARING (2.165") PINION SHAFT SCREW (M10-1.50 X 45mm, SOC) DOWEL PIN (M10 X 30mm) OUTPUT SHAFT THRUST RACE (2.756") SHIFT SHAFT DROP BOX COVER IDLER GEAR IDLER SLEEVE INTERNAL SEAL (.750") WASHER (M10, HARDENED) SLEEVE BEARING INTERNAL SEAL SCREW (M10-1.50 X 80mm, SOC) PICKUP TUBE (02N-02NF90-2") STOP TRANSFER CASE LIFT

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. TRANSFER CASE LIFT BRACKET (p/n 320-647) IS REQUIRED TO REMOVE TRANSFER CASE. REMOVE TWO MOUNTING SCREWS, ALIGN, BRACKET WITH MOUNTING HOLES AS SHOWN, AND RE-INSTALL SCREWS. REFER TO RT POWERSHIFT REPAIR GUIDE P/N 055-072 FOR FURTHER INSTRUCTIONS.

NOTE:

03

ID0090462

36

37

38

TILT FRAME DIFFERENTIAL MOUNT

RT90/RT95/RT115 BEGINS WITH S/N CMWRT95MLB0000374 CMW 15T3CB0000220, CMW15QPB0000161, CMWRT95HVB0000410

6 16 5 7

18

11

10 2

13 4 1 7 5 6

5 16

12 15

6

8 14

17

9 3

12

ID0068610

39

TILT FRAME DIFFERENTIAL MOUNT

RT90/RT95/RT115 BEGINS WITH S/N CMWRT95MLB0000374 CMW 15T3CB0000220, CMW15QPB0000161, CMWRT95HVB0000410 REF PART NO. NUMBER

QTY

1. 160-456

-

RIGID PLANETARY AXLE (28.22)

160-455

-

STEERABLE AXLE (26.22)

2. 301-4122

1

AXLE MOUNT, OPEN

3. 301-4121

1

AXLE MOUNT, CLOSED

4. 178-1004

1

INSIDE BUSHING (4.928" ID, 5.500" OD)

5. 106-398

14

WASHER (M16, HARDENED)

6. 106-545

14

LOCKNUT (M16-2.0, PRV TRQ, 10.9)

7. 106-616

8

SCREW (M16-2.00 X 55mm, 10.9)

8. 307-303

2

CLAMP PLATE

9. 106-489

4

FLG NUT (M24-3.00, 10.9)

10. 106-625

4

WASHER (M24)

11. 107-089

4

SCREW (M24-3.00 X 260mm, 10.9)

SEE FOOTNOTE 2

12. 301-1942

2

TILT CYLINDER MOUNT

SEE FOOTNOTE 1

13. 301-1940

2

TILT CYLINDER AXLE MOUNT

SEE FOOTNOTE 1

14. 106-666

4

SCREW (M16-2.00 X 65mm, 10.9)

15. 106-340

2

SCREW (M16-2.00 X 50mm)

16. 115-003

2

ZERK (1/4-NF, STR)

17. 178-1003

1

OUTSIDE BUSHING (4.928" ID, 5.500" OD)

18. 301-1944

2

RIGHT QUAD TILT CYLINDER AXLE MOUNT

DESCRIPTION

REMARKS

SEE NOT SHOWN FOR SERVICE PART KIT

NOT SHOWN:

500-1221

DIFFERENTIAL KIT

FOOTNOTES:

1. OLDER UNITS USED TILT MOUNTS 306-891 AND 306-893. IF REPLACING ONE OF THESE COMPONENTS ALL 4 PARTS MUST BE REPLACED BY 301-1940 AND 301-1942.

2. USE LOCTITE 609

NOTE:

12

ID0068610

40

TILT FRAME DIFFERENTIAL MOUNT

RT95M - RT95H - RT115 BEGINS WITH S/N CMWRT95HVB0000410, CMWRT95MLB0000374 CMWRT15T3CB0000220, CMWRT115QPB0000161. T2 & T3 UNITS

16

19 11 17 7 10

2 13 18 1 7 5 6

19 17

12 15

16 8 14

4

9 3

08

ID0246575

41

TILT FRAME DIFFERENTIAL MOUNT

RT95M - RT95H - RT115 BEGINS WITH S/N CMWRT95HVB0000410, CMWRT95MLB0000374 CMWRT15T3CB0000220, CMWRT115QPB0000161. T2 & T3 UNITS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

QTY

160-456 160-455 301-4122 1 301-4121 1 178-1003 1 106-398 6 106-545 6 106-831 8 307-303 2 106-489 4 106-625 4 107-089 4 301-1942 2 301-1940 2 106-666 4 106-340 2 106-356 8 106-399 8 178-1004 1 115-003 2

DESCRIPTION

REMARKS

RIGID PLANETARY AXLE (28.22) STEERABLE AXLE (26.22) AXLE MOUNT, OPEN SEE FOOTNOTE 3 SEE FOOTNOTE 3 AXLE MOUNT, CLOSED OUTSIDE BUSHING (4.928" ID, 5.500" OD) WASHER (M16, HARDENED) LOCKNUT (M16-2.0, PRV TRQ, 10.9) SCREW (M20-2.50 X 60mm, 10.9) CLAMP PLATE FLG NUT (M24-3.00, 10.9) WASHER (M24) SEE FOOTNOTE 2 SCREW (M24-3.00 X 260mm, 10.9) SEE FOOTNOTE 1 TILT CYLINDER MOUNT TILT CYLINDER AXLE MOUNT SEE FOOTNOTE 1 SCREW (M16-2.00 X 65mm, 10.9) SCREW (M16-2.00 X 50mm) FLG NUT (M20-2.50, 10.9) WASHER (M20, HARDENED) INSIDE BUSHING (4.928" ID, 5.500" OD) ZERK (1/4-NF, STR)

NOT SHOWN:

FOOTNOTES:

1. OLDER UNITS USED TILT MOUNTS 306-891 AND 306-893. IF REPLACING ONE OF THESE COMPONENTS ALL 4 PARTS MUST BE REPLACED BY 301-1940 AND 301-1942.

2. USE LOCTITE 609 3. BEGINS WITH S/N'S: _____________, _____________, & _____________. IF REPLACING OLD MOUNTS (301-0186 OR 301-0187), OR BUSHING (178-365) ON RT95M, RT95H, OR RT115 USE KIT 190-1859, WHICH INCLUDES REFERENCE #'S 2, 3, 4, 18 & 19.

NOTE:

08

ID0246575

42

AXLE

BEVEL GEAR/PINION SET STEERABLE/RIGID

4

1

5

6 2 3 3

03

ID0113897

43

AXLE

BEVEL GEAR/PINION SET STEERABLE/RIGID REF PART NO. NUMBER

QTY

1.

2.

499-478 499-487

1 1

3.

4.

5.

6.

499-479 499-480 499-481 499-482

2 1 1 1

DESCRIPTION

REMARKS

BEVEL GEAR SET Z12/32 SHIM KIT SHIM 2.50mm SHIM 2.60mm SHIM 2.70mm SHIM 2.80mm SHIM 2.90mm SHIM 3.00mm SHIM 3.10mm SHIM 3.20mm SHIM 3.30mm SHIM 3.40mm BEARING OIL SEAL RING O-RING FLANGE

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0113897

44

AXLE

DOUBLE JOINT STEERABLE

1

4

05

3

2

ID0075620

45

AXLE

DOUBLE JOINT STEERABLE REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1. 499-495 2 DOUBLE JOINT 2. 500-1266 2 THRUST WASHER 3. 500-1267 2 WASHER 4. 500-1268 2 SNAP RING

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0075620

46

AXLE

SWIVEL HOUSING & STEERING CYL. STEERABLE

9 8 6 1 7

2

10

3

4

11

5 1

04

2

ID0113890

47

AXLE

SWIVEL HOUSING & STEERING CYL. STEERABLE REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1. 115-065 4 ZERK, METRIC (M6 X 1) 2. 106-472 12 SCREW (M14-2.00 X 35mm) 3. 499-473 2 KING PIN 4. 499-474 2 NUT (M20-1.5) 5. 499-475 2 KING PIN 6. 499-476 2 STEERING ARM ASS'Y 7. 107-344 4 LK SCREW (M12-1.75 X 45mm) 8. 157-747 2 OIL SEAL 9. 178-172 2 BUSHING 10. 107-345 4 SCREW (M16-2.00 X 100mm) 11. 499-477 1 OIL SEAL KIT (CYL)

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0113890

48

AXLE

AXLE HOUSING STEERABLE

14 1

15

2

3

13 4 5 6 7

9 11

03

12

8

10

ID0158512

49

AXLE

AXLE HOUSING STEERABLE

REF PART NO. NUMBER QTY DESCRIPTION 1. 514-345 2 PLUG (M22-1.50, SOC) 2. 499-461 1 THRUST WASHER 3. 499-462 1 BUSHING 4. 499-463 2 BELLEVILLE WASHER 5. 499-464 1 SPACER 6. 499-465 2 BUSHING 7. 499-466 2 BUSHING 8. 499-467 2 OIL SEAL RING 500-1135 2 OIL SEAL 9. 499-468 2 SPHERICAL BEARING 10. 499-469 2 BELLEVILLE WASHER 11. 499-470 1 BUSHING 12. 499-471 1 THRUST WASHER 13. 499-472 1 PIN LOCKING WASHER 14. 500-1697 1 LH BUSH (SPACER) 15. 500-1698 2 SCREW (M4-.7 X 10mm, 10.9)

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0158512

50

AXLE

DIFF LOCK STEERABLE/RIGID

1

7 3 5

2 4 5

6

6

4

03

ID0113895

51

AXLE

DIFF LOCK STEERABLE/RIGID REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1. 499-488 1 O-RING 2. 499-489 1 PISTON 3. 499-490 1 O-RING 4. 499-491 2 SNAP RING (D12) 5. 499-492 2 SPACER 6. 499-493 2 SPRING 7. 499-494 1 FORK

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0113895

52

AXLE

DIFFERENTIAL RIGID

3 8 2 4

7 7 6 3

5 1 7

7

4

04

ID0114003

53

AXLE

DIFFERENTIAL RIGID REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

QTY

499-513 1 107-346 12 107-348 2 501-893 2 499-484 2 499-485 1 499-486 4 500-2006 1

DESCRIPTION

DIFFERENTIAL KIT LK SCREW (M10-1.50 X 75mm) SCREW (M6-1.00 X 10mm) RING NUT BEARING SLEEVE PIN BEARING

REMARKS

USED ON ALL MODELS. SIZE: 90X50X21.75mm

REPLACES ONE 499-484 ON NEWER MODELS. SIZE: 90X55X23mm

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0114003

54

AXLE

DIFFERENTIAL STEERABLE

3 8 2 4

7 7 6 3

5 1 7

7

4

03

ID0113896

55

AXLE

DIFFERENTIAL STEERABLE REF PART NO. NUMBER

QTY

1. 499-483 1 2. 107-346 12 3. 107-348 2 4. 501-893 2 5. 499-484 2 6. 499-485 1 7. 499-486 4 8. 500-2006 1

DESCRIPTION

DIFFERENTIAL KIT LK SCREW (M10-1.50 X 75mm) SCREW (M6-1.00 X 10mm) RING NUT BEARING SLEEVE PIN BEARING

REMARKS

USED ON ALL MODELS. SIZE: 90X50X21.75mm

REPLACES ONE 499-484 ON NEWER MODELS. SIZE: 90X55X23mm

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0113896

56

AXLE-WHEEL HUB/REDUCTION GEAR STEERABLE

1 2

4 3 14 5

9

13 11 12 10 6 8 7

07

ID0042270

57

AXLE-WHEEL HUB/REDUCTION GEAR STEERABLE REF PART NO. NUMBER

QTY

DESCRIPTION

1. 499-497 2 SEAL RING 499-940 SEAL KIT 499-948 OIL SEAL 2. 499-498 4 BEARING 3. 499-499 8 STUD 4. 157-224 2 O-RING 5. 499-501 2 RING 6. 114-036 2 PLUG, PLANETARY CARRIER 7. 107-349 4 SCREW (M8-1.25 X 20mm) 8. 499-502 2 PLANETARY CARRIER ASS'Y 9. 499-503 2 CROWN GEAR 10. 499-504 1 PLANET GEAR KIT 11. 499-505 12 CENTERING BUSHING 12. 499-506 12 BOLT (M12 X 45) 13. 499-507 2 WHEEL CARRIER 14. 499-521 8 LUG NUT (M20-1.50)

REMARKS

EARLY STYLE 176mm OD CURRENT PRODUCTION 180mm OD CURRENT PRODUCTION QTY PER WHEEL ASS'Y

4 KITS PER WHEEL ASSEMBLY

QTY PER WHEEL ASS'Y

NOT SHOWN:

FOOTNOTES:

NOTE:

07

ID0042270

58

REAR STEER AXLE SENSOR BEGINS WITH S/N'S: CMWRT95MH90000290, CMWRT95HV90000367, CMWR15T3C90000132

9 11

12

10

8 13

7 3

2 5

6 4

1 18 17 19 SEE FOOTNOTE 1

03

16 15 14

ID0228510

59

REAR STEER AXLE SENSOR BEGINS WITH S/N'S: CMWRT95MH90000290, CMWRT95HV90000367, CMWR15T3C90000132 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

215-1503 154-301 362-1404 154-291 300-9066 106-163 154-310 215-1518 215-1517 107-008 106-685 150-2907 150-2843 500-1804 499-512 500-1801 500-1802 500-1803 115-065

QTY

1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REAR STEER SENSOR CONNECTOR (10S-10O) WIRE GROMMET BK CONNECTOR (10O-10O90BK) BRACKET FLG SCREW (M8-1.25 X 30MM) REDUCER NUT (10OF) 3 PIN DEUTSCH CONNECTOR, DT04-3P 3 PIN DEUTSCH PLUG, W3P FLG LK SCREW (M12-1.75 X 50MM) LOCKNUT(M12-1.75,PRV TRQ,10.9) HOSE (10OFX-22"-3000) SWIVEL (10O-10OFX90; DO NOT PRESSURIZE) KING PIN (REAR STEER) O-RING SHAFT WASHER SNAP RING D15 ZERK (M6 X 1)

REMARKS

SEE FOOTNOTE 4 SEE FOOTNOTE 4 SEE FOOTNOTE 4 SEE FOOTNOTE 4 SEE FOOTNOTE 2 & 4 SEE FOOTNOTE 4 SEE FOOTNOTE 4 SEE FOOTNOTE 3 & 4 SEE FOOTNOTE 4 & 5 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

214-133, TERMINAL PIN (DEUTSCH), USE QTY=3 PER AXLE SENSOR ASSEMBLY 215-1535, HEAT SHRINK 3/8" ADHESIVE, USE QTY=3 @ 2" FOR A TOTAL OF 6" PER AXLE SENSOR ASSEMBLY 215-1546, KEVLAR BRAIDED SLEEVING (1/2"), USE QTY=2 @ 5" FOR A TOTAL OF 10" PER AXLE SENSOR ASSEMBLY

FOOTNOTES:

1. PARTS BELONG TO CARRARO REAR STEER KIT 190-1424.

2. BRACKET 300-9066 IS ONLY USED ON THE REAR AXLE SENSOR ASSEMBLIES, 220-1181 AND 220-1183.

3. HOSE 150-2907 USED IN AXLE SENSOR ASSEMBLY 220-1181; USE HOSE 153-294 FOR AXLE SENSOR ASSEMBLY 220-1180, HOSE 515-605 FOR AXLE SENSOR ASSEMBLY 220-1182, AND HOSE 150-1729 FOR AXLE SENSOR ASSEMBLY 220-1183.

4. PARTS BELONG TO AXLE SENSOR ASSEMBLIES; SEE NOTE BELOW FOR DETAILS 5. ONLY USED IN RT90/95/115 AXLE SENSOR ASSEMBLIES 220-1180 AND 220-1181.

NOTE:

RT90/95/115 FRONT AXLE SENSOR ASSEMBLY IS P/N 220-1180 RT90/95/115 REAR AXLE SENSOR ASSEMBLY IS P/N 220-1181 RT70/75 FRONT AXLE SENSOR ASSEMBLY IS P/N 220-1182 RT70/75 REAR AXLE SENSOR ASSEMBLY IS P/N 220-1183

03

ID0228510

60

61

62

63

64

AXLE-REDUCTION GEARS RIDGE

4 1 3 2

03

ID0122671

65

AXLE-REDUCTION GEARS RIDGE REF PART NO. NUMBER 1. 114-036

QTY DESCRIPTION 2 PLUG, PLANETARY CARRIER

2.

107-349

4

3.

499-502

2

PLANETARY CARRIER ASS'Y

4.

499-504

1

PLANET GEAR KIT

REMARKS

SCREW (M8-1.25 X 20mm) 4 KITS PER WHEEL ASSEMBLY

NOT SHOWN:

499-517 2 SPLINE SHAFT Z-12 499-518 2 COUPLING 499-519 2 SNAPRING (D33) 499-520 2 HALF SHAFT FOOTNOTES:

NOTE:

03

ID0122671

66

POWERSHIFT DRIVE LINE RT90M

2

12

3 7 3 2 11

13 4

14 4

5

10

1 3

5

9 8 6 4 3 2

4 11 12

B

806-356

67

POWERSHIFT DRIVE LINE RT90M REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

1 3 4 1 1 1 4 4 4 8 8 -

182-140 182-173 182-145 115-003 182-146 166-235 166-231 105-151 178-072 105-222 105-119 105-120 160-516 306-970

DESCRIPTION

YOKE FLANGE YOKE CROSS/BEARING KIT (1-3/16") ZERK (1/4-NF, STR) U BOLT KIT FRONT DRIVE SHAFT REAR DIRVE SHAFT LOCKNUT (7/16-NC) WASHER BOLT (7/16-NC X 1-3/4") BOLT (7/16 NF X 1-1/2") NUT (7/16-NF) BRAKE DISC DRIVELINE FLANGE

REMARKS

USE LOCTITE 242 OR EQUIVALENT

FOOTNOTES

NOTE:

B

806-356

68

TIRE & WHEEL

38 X 18.00-20 E16TL

1

2

5 4 3

01

ID0222826

69

TIRE & WHEEL

38 X 18.00-20 E16TL REF PART NO. NUMBER

1.

2.

3.

4.

5.

QTY

205-1126 4 205-1125 4 205-473 4 205-168 4 205-165 4 499-521 -

DESCRIPTION

T/W (38 X 18.00-20 16PLY) TIRE (38 X 18.00-20.0, E16TL) WHEEL (20.0 X 14 WD W/8) HP VALVE STEM (.625") VALVE CAP (.305"-32) LUG NUT (M20-1.50)

REMARKS

INCL. REF. #'S 1, 2, 3 16 PLY INCL. REF #4

NOT SHOWN:

FOOTNOTES:

NOTE:

REPLACES 205-456

01

ID0222826

70

BRAKE CALIPER POWERSHIFT

2

4 6

7

5 8 11 10

9

3 6 1 5

04

ID0036836

71

BRAKE CALIPER POWERSHIFT REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11

320-261 312-768 160-773 160-534 107-498 105-248 105-894 106-621 105-793 160-516 306-970

QTY

DESCRIPTION

1 LEFT BRAKE BRACKET 1 RIGHT BRAKE BRACKET 1 BRAKE CALIPER 1 BRAKE CALIPER 4 SHLD BLT(M16 X 120MM,M12-1.75) 4 SCREW (M12-1.75 X 25MM, SOC) 4 LOCKNUT(M10-1.50,PRV TRQ,10.9) 4 SCREW (M10-1.50 X 45MM, 10.9) 4 WASHER (M10) 1 BRAKE DISC 1 DRIVELINE FLANGE

REMARKS

PARK BRAKE & SEE FOOTNOTE 1 SERVICE BRAKE & SEE FOOTNOTE 2 SEE FOOTNOTE #3.

NOT SHOWN:

FOOTNOTES:

1. REF #3 (160-773) INCLUDES 1X EXTENSION SPRING, 115-600 & 1X FRICTION PAD KIT (PAIR) 505-073.

2. REF #4 (160-534) INCLUDES 1 PAIR BRAKE PADS (505-083) & 1X INSULATOR (41 SERIES) 502-168.

3. CLEAN BOLT THREADS & HOLE THREADS. APPLY LOCTITE 277 OR EQUIVALENT TO BOTH SETS OF THREADS AND TORQUE BOLTS TO 85 FT-LBS.

NOTE:

1. REFER TO PARK BRAKE PAGE FOR INFORMATION ON PARK BRAKE CABLE.

04

ID0036836

72

BRAKE CALIPER RT70/RT75/RT90/RT95 SERVICE

2 3 4 2 7

3 5

4

1

6

02

ID0036801

73

BRAKE CALIPER RT70/RT75/RT90/RT95 SERVICE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

QTY

DESCRIPTION

160-534 BRAKE CALIPER 160-665 3 BRAKE BLEEDER VALVE 505-080 2 CALIPER PISTON 505-081 2 DUST BOOT 505-082 2 SQUARE RING (223 D70) 505-083 1 BRAKE PAD (PAIR) 502-168 2 INSULATOR N.A. 1 CALIPER BODY

REMARKS

INCL REF NO.'S 1 THRU 7

PAIR

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0036801

74

SERVICE BRAKE SYSTEM POWERSHIFT BEGINS WITH S/N

4

5 3

6 8

7 9

1

10 11

12 13

2

16 15

14

22 21

20 17

18 19

02

ID0171841

75

SERVICE BRAKE SYSTEM POWERSHIFT BEGINS WITH S/N REF PART NO. NUMBER

QTY

DESCRIPTION

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3

BRONZE BUSHING (1.000") NUT (3/8-NC) BRAKE PEDAL EXTERNAL SNAP RING (1.000") MACH BUSHING (1.000", 14GA) PIN (1.000" X 3.900") LK BOLT (3/8-NC X 1-1/2", NLK) WASHER (.406") ROD END (3/8-NF, FM) NUT (3/8-NF) MASTER CYLINDER ROD DUST COVER MASTER CYLINDER BANJO CONNECTOR (08-05T-04NF) COTTER PIN (.187 X .750) EXTENSION SPRING BRAKE HOSE (3/16 T X 19") FLARE FITTING (03TM-04TFM) BRAKE CALIPER BRAKE CUTOUT SWITCH FLG NUT (M10-1.50) FLG LK SCREW (M10-1.50 X 30mm)

125-407 105-053 306-996 115-484 110-078 178-383 107-242 106-415 110-102 105-093 361-887 115-329 151-216 157-293 105-504 115-613 149-861 156-282 160-534 214-914 106-266 107-002

REMARKS

USE REPAIR KIT 500-1586

TORQUE TO 180 in-lbs

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0171841

76

SERVICE BRAKE SYSTEM POWERSHIFT ENDS WITH S/N

4

5 3

6 8

7 9

1

10 11

12 13

2

17 16 14 23

15 22

25 21

24 18

19 20

04

ID0114974

77

SERVICE BRAKE SYSTEM POWERSHIFT ENDS WITH S/N REF PART NO. NUMBER

QTY

DESCRIPTION

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

125-407 105-053 306-996 115-484 110-078 178-383 107-242 106-415 110-102 105-093 361-887 115-329 151-216 155-120 157-293 105-504 115-613 149-861 156-282 160-534 214-914

1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

BRONZE BUSHING (1.000") NUT (3/8-NC) BRAKE PEDAL EXTERNAL SNAP RING (1.000") MACH BUSHING (1.000", 14GA) PIN (1.000" X 3.900") LK BOLT (3/8-NC X 1-1/2", NLK) WASHER (.406") ROD END (3/8-NF, FM) NUT (3/8-NF) MASTER CYLINDER ROD DUST COVER MASTER CYLINDER STREET ELBOW (04N-04NF90) BANJO CONNECTOR (08-05T-04NF) COTTER PIN (.187 X .750) EXTENSION SPRING BRAKE HOSE (3/16 T X 19") FLARE FITTING (03TM-04TFM) BRAKE CALIPER BRAKE CUTOUT SWITCH

22.

23.

24.

25.

106-266 107-002 157-840 115-181

3 3 1 1

FLG NUT (M10-1.50) FLG LK SCREW (M10-1.50 X 30mm) REDUCER (02N-04SF) REDUCER (04N-02NF)

REMARKS

USE REPAIR KIT 500-1586

TO INSTALL, HAND TIGHTEN THEN APPLY 180 in-lbs TORQUE MAX.

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0114974

78

79

80

BRAKE KIT

RT70/75M, RT90/95M BEGINS WITH S/N: CMWRT95MEC0000394; ENDS WITH S/N: CMWRT95M__0000420

10 17

2 9 11 14 16

8

13

15

1 12

3 16 4

7

5

SEE FOOTNOTE 1

6 07

ID0151700

81

BRAKE KIT

RT70/75M, RT90/95M BEGINS WITH S/N: CMWRT95MEC0000394; ENDS WITH S/N: CMWRT95M__0000420 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

190-1097 160-1033 300-1958 160-1036 160-1041 105-162 105-022 107-980 105-894 156-282 149-862 106-797 105-678 300-1960 300-1959 106-725 106-396 500-3089

QTY

1 1 1 1 1 2 4 4 1 1 2 2 2 1 2 6 1

DESCRIPTION

REMARKS

HEAVY DUTY BRAKE KIT BRAKE CALIPER RIGHT BRAKE BRACKET BRAKE DISC MECHANICAL CALIPER SPACER BOLT (3/8-NC X 2-1/4") BOLT (3/8-NC X 4") SCREW (M10-1.50 X 50MM, 10.9) LOCKNUT(M10-1.50,PRV TRQ,10.9) FLARE FITTING (03TM-04TFM) BRAKE HOSE (3/16T X 34") SCREW (M12-1.75 X 35MM, SOC) SCREW (M12-1.75 X 140MM, SOC) SPACER RIGHT BRAKE BRACKET SCREW (M10-1.50 X 65MM, SOC) WASHER (M10, HARDENED) BRAKE PAD (PAIR)

INCLUDES REF NO.'S 1-16 INCL REF NO. 17, TORQUE MOUNTING BOLTS TO 180- 200 FT - LBS.

SHOULDER BOLT, 12 POINT, 5/8"

USED ON 160-1033 BRAKE CALIPER

SEE FOOTNOTE 1

USE SILICON SEALER SUPPLIED WITH 160-1033 CALIPER

NOT SHOWN:

500-2480

FOOTNOTES:

1. INSTALL ITEM #4 BETWEEN PARK BRAKE (160-733) CALIPER HALVES. RE-ASSEMBLE USING LONGER BOLTS, ITEMS #5 & #6 (2X) RE-USE STEEL FLAT WASHERS ON CALIPER. TORQUE BOLTS TO 30 - 35 FT/LBS.

NOTE:

07

ID0151700

82

NOTES:

ID0134963

83

FRAME COMPONENTS

ID0135068

84

FRONT COUNTERWEIGHT

4

9

7 5

8 7 2

3

1

6 2 5

3

4

1

03

ID0121773

85

FRONT COUNTERWEIGHT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

100-863 375-369 106-352 106-488 106-587 179-605 319-948 106-399 106-611 319-947

QTY

8 2 2 2 2 1 8 8 1

DESCRIPTION

REMARKS

COUNTERWEIGHT KIT WEIGHT CASTING NUT (M24-3.00) WASHER (M24, HARDENED) LOCKNUT (M24-3.0, PRV TRQ, 10.9) ALL THREAD ROD (M24 X 15.00) RIGHT WEIGHT RACK WASHER (M20, HARDENED) SCREW (M20-2.50 X 40MM, 10.9) LEFT WEIGHT RACK

INCLUDES REF. NO'S 1-9 USED ONLY WITH 3 WEIGHTS OR LESS USED ONLY WITH 3 WEIGHTS OR LESS

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0121773

86

ENGINE ENCLOSURE

12

7 1

19 21 5

24

20

16

27

8 8

25

26 23

28

15 14

13

2

16

11 12

17

6

18 22

9

4 10

4

15

3 14

06

ID0024298

87

ENGINE ENCLOSURE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

QTY

DESCRIPTION

191-227 SIDE PANEL LOCK KIT 307-463 1 LEFT SIDE PANEL 320-738 1 RIGHT SIDE PANEL W/ AIR INTAKE 106-081 2 SCREW (M10-1.50 X 106-387 8 FLG LOCKNUT (M10-1.50) 319-808 1 MID HOOD 307-909 1 FRONT HOOD SUPPORT 310-716 1 FIREWALL 111-043 9 INSULATION STUD 117-341 1 SOUND INSULATION 211-087 1 BATTERY JUMPER TERMINALS (RED) 117-344 AR BULK EDGE (3/16", SOLD PER 1') 110-681 4 DRAW LATCH 117-344 AR BULK EDGE (3/16", SOLD PER 1') 107-001 7 FLG LK SCREW (M10-1.50 X 25 25mm) 117-978 AR BULK EDGE (3/16 W/ 1" BULB)(FT) 107-003 8 FLG LK SCREW (M12-1.75 X 35mm) 106-709 8 FLG LK NUT (M12-1.75) 106-558 5 CLIP NUT (M10-1.50) 106-048 8 LOCKNUT (#10-24) 106-408 8 BOLT (#10-24 X 1-1/4",SOC, 116-489 AR BULK EDGE (1/8", SOLD PER 1') 116-421 AR BULK EDGE (1/8", SOLD PER 1') 217-819 1 BATTERY DISCONNECT SWITCH 106-725 2 SCREW (M10-1.50 X 65mm, SOC) 194-345 2 LOCK CABLE 318-523 2 LOCK BRACKET 110-348 4 POP RIVET(3/16" X .664") 325-791 1 HOOD CAP 106-313 2 POP RIVET(1/8" X 3/8" ALUM) 115-686 2 BULK EDGE (5/32", SOLD PER 1")

REMARKS

INCLUDES REF #'S 23,24 & 25.

USE 2 @ 25" USE 1 @ 16" USE 18"

USE 2 @ 21" USE 1 @ 26" INCLUDES HARDWARE

5-1/2" EACH

NOT SHOWN:

FOOTNOTES:

NOTE:

06

ID0024298

88

FENDER AND COVERS

34 37

30

10

36

17

40

19

35 11

20 26

15

20

4 25 49

38 27

39

44

26

48 47

11 42

12

3 49

6

12 20 49

20

43 45 44

46

12 16

20 20 13 49

23 12

25

20

2

13

41

20 12 49 20 11

11 49

24

16

32

49

21

8

16

22

7

49 20 12

1

12

49 25

13 9

22

18

41

12 33

18 19

31

28 12 16 14

49

6 5 20 11

12

29

26

26 20 20

20

11

12 25 33

05

ID0024299

89

FENDER AND COVERS REF PART NO. NUMBER

1.

QTY

306-492 1 323-977 1 2. 306-491 1 3. 306-490 1 4. 313-225 1 5. 313-226 1 6. 308-897 2 7. 250-622 1 8. 318-793 1 9. 107-461 1 10. 120-085 4 11. 107-778 26 12. 107-135 38 13. 306-796 2 14. 309-816 2 15. 217-762 1 16. 106-992 12 17. 307-644 1 18. 107-358 8 19. 107-580 8 20. 107-629 43 21. 110-348 3 22. 105-1549 7 23. 106-574 5 24. 306-795 1 25. 309-434 6 26. 107-096 9 27. 362-823 6 28. 117-360 2 29. 309-847 1 30. 106-155 20 31. 120-084 4 32. 120-123 1 33. 106-989 2 34. 106-806 2 35. 106-709 2 36. 316-945 1 37. 217-194 10 38. 217-764 1 39. 157-333 1 40. 107-597 4 41. 106-388 7 42. 217-072 1 43. 217-817 1 44. 110-854 6 45. 165-817 2 46. 107-312 4 47. 107-871 4 48. 300-9262 1 49. 106-163 22

DESCRIPTION

REAR PANEL REAR PANEL LEFT FENDER RIGHT FENDER RIGHT OUTSIDE FENDER LEFT OUTSIDE FENDER PANEL MANUAL COMPARTMENT FLOOR PLATE LOCKING LATCH ADJUSTABLE LOUVER (23-0005) SCREW (M8-1.25 X 30mm, BUT SOC) CLIP NUT (M8-1.25) TAB STRAP ROCKER SWITCH (SPDT) FLG LK SCREW (M8-1.25 X 25mm) COVER WELLNUT (M4-0.7 X 12.67mm LG) SCREW (M4-0.70 X 16mm, BUT SOC) WASHER (M8) POP RIVET (3/16" X .664") SCREW (M6-1.00 X 20MM) CLIP NUT (M6-1.00) TAB TAB LOCKNUT (M8-1.25, NLK) COVER GRAB HANDLE FUEL SENDER COVER SCREW (#4-40 X 5/8", PAN PLPS) HOSE ADAPTER (23-0048) HOSE ADAPTER (23-0090) FLG LK SCREW (M8-1.25 X 35mm) FLG LK SCREW (M12-1.75 X 25mm) FLG LK NUT (M12-1.75) RELAY MOUNT MICRO RELAY BASE ROCKER SWITCH (SPDT) HOLE PLUG (.750") WASHER (M4) WASHER (M6) ROCKER SWITCH ROCKER SWITCH (SEALED) SWITCH ACTUATOR GUARD SWITCH GASKET SCREW (M6-1.00X25MM, BUT SOC) WELLNUT (M6-1.00 X 20.35MM LG) SWITCH MOUNT FLG SCREW (M8-1.25 X 30MM)

REMARKS

ASSY USED WITH A/C OR HEATER OPTION

SEE FOOTNOTE 3

USED WITH AXLE LOCK

SEE FOOTNOTE 5

SEE FOOTNOTE 1 USED WITH FRAME TILT OPTION SEE FOOTNOTE 2

SEE FOOTNOTE 4 & 5 SEE FOOTNOTE 4 & 5 USE WITH AXLE LOCK, FRAME TILT, REAR STEER & REEL WINDER SEE FOOTNOTE 4 & 5 SEE FOOTNOTE 4 SEE FOOTNOTE 4 SEE FOOTNOTE 4

FOOTNOTES

1. THIS IS TO BE USED FOR POWERSHIFT UNITS ONLY 2. USE LOCTITE 401 ADHESIVE 3. USE LOCTITE 242 OR EQUIVALENT. 4. USED WITH REAR STEER SYSTEM. 5. UNITS WITHOUT REAR STEER, FRAME TILT, AXLE LOCK, OR REEL WINDER USE PLUGS 362-823.

NOTE:

05

ID0024299

90

91

92

TRENCH DEPTH METER/ODOMETER MT

1 4 5 2 6 3

7 8

(7)

.20

C

808-876

93

TRENCH DEPTH METER/ODOMETER MT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

QTY

107-004 3 315-744 1 106-709 3 105-680 2 107-597 2 107-451 AR 214-692 1 107-414 2

DESCRIPTION

FLG LK SCREW (M12-1.75 X 45mm) SENSOR BRACKET FLG LK NUT (M12-1.75) NUT (M4, W/LK WSHR) WASHER (M4) SHIM (.135") PROXIMITY SWITCH SCREW (M4-0.70 X 30mm, BUT SOC)

REMARKS

RT95 / RT115 & SEE FOOTNOTE 2 RT95 / RT115 & SEE FOOTNOTE 2

SEE FOOTNOTE 1

NOT SHOWN

FOOTNOTES

1.

2.

SHIMS (107-451) ARE USED TO ADJUST SPACING OF PROXIMITY SWITCH (214-692) FROM THE DRIVE SHAFT. RT75 USES 2X 105-003 (FLG LOCKNUT 5/16-NC) & 2X 105-190 (BOLT 5/16-NC X 2-3/4")

NOTE

C

808-876

94

COUNTERWEIGHT/GRILLE (RT SERIES)

ENDS WITH SERIAL NUMBER (SEE NOTES)

3

12 2

4

7 13 6 19

1

14

7 21

18

14

1

20

13

17 16 15

15

9

11 2

10

5

4

SEE FOOTNOTE 2

8 3

6

1

14

TRACTOR FRAME

TRACTOR FRAME CROSSMEMBER ID0030955

95

COUNTERWEIGHT/GRILLE (RT SERIES)

ENDS WITH SERIAL NUMBER (SEE NOTES) REF PART NO. NUMBER

QTY

DESCRIPTION

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

106-633 6 SCREW (M20-2.5 X 130mm) 106-665 6 LOCKNUT (M20-2.50, 10.9) 375-370 1 CASTING (FRAME NOSE) 327-389 2 CLAMP BAR 313-825 2 GRILLE 118-400 2 SHIM (.075") 117-386 2 EXTENSION SPRING 308-723 2 SCREEN 106-987 2 FLG LK SCREW (M6-1.00 X 16mm) 178-873 2 SCREEN RETAINER 106-574 2 CLIP NUT(M6-1.00) 307-909 - FRONT HOOD SUPPORT 106-237 3 LOCKNUT (M6-1.00, PRV TRQ, NLK) 105-284 3 WASHER (3/16") 106-161 3 FLG SCREW (M6-1.00 X 20mm) 318-726 1 PLATE 217-267 1 HYDROSTAT FRAME HARNESS 217-268 1 POWERSHIFT FRAME HARNESS 18. 306-609 1 HIGH FREQUENCY HORN 192-006 1 HIGH FREQUENCY HORN 192-005 1 HORN BRACKET 19. 106-992 2 FLG LK SCREW (M8-1.25 X 25MM) 20. 106-386 2 FLG LOCKNUT (M8-1.25) 21. 323-673 1 HORN BRACKET

REMARKS

SEE FOOTNOTE 1, 3 & 4 SEE FOOTNOTE 4 SEE FOOTNOTE 3 SEE FOOTNOTE 2 & 4 SEE FOOTNOTE 4

OBSOLETE

NOT SHOWN:

FOOTNOTES:

1- TORQUE BOLT TO 350 FT/LB (475 N/m) 2- INSTALL REF #4 (327-389) WITH THICK EDGE TO FRAME. 3- REFER TO NOSE CASTING INSTALLATION INSTRUCTIN 051-420.

4- 104-186, BOLT AND SHIM KIT, INCLUDES REF #'S 1,2,4 & 6.

NOTE:

1. RT75 ENDS WITH S/N 5Z0663.

2. RT95 / RT115 ENDS WITH S/N 5Z0676

14

ID0030955

96

COUNTERWEIGHT/GRILLE (RT SERIES) BEGINS WITH SERIAL NUMBER (SEE NOTES)

10 1

5 2

3 5 2

13 15

9

4

23

10

8

3

14

4

14

21

16

7

22

12 17 18 19

18

19 22

11

20 14 22

22

SEE FOOTNOTE 2 A

809-861

97

COUNTERWEIGHT/GRILLE (RT SERIES) BEGINS WITH SERIAL NUMBER (SEE NOTES) REF PART NO. NUMBER

QTY

1 375-457 2 106-633 3 106-665 4 106-399 5 307-531 7 178-873 8 106-574 9 106-987 10 117-386 11 308-723 12 307-909 13 106-386 14 106-161 15 323-673 16 106-992 17 318-726 18 105-284 19 106-237 20 217-267 21 192-006 22 329-358 23 106-385

1 NOSE CASTING 6 BOLT (M20-2.50 X 130MM) 5 LOCKNUT (M20-2.50, 10.9) 11 WASHER (M20, HARDENED) 2 CLAMP BAR 2 SCREEN RETAINER 2 CLIP NUT (M6-1.00) 2 FLG LK SCREW (M6-1.00 X 16MM) 2 EXTENSION SPRING 2 SCREEN 1 FRONT HOOD SUPPORT 1 FLG LOCKNUT (M8-1.25) 4 FLG SCREW (M6-1.00 X 20MM) 1 HORN BRACKET 1 FLG LK SCREW (M8-1.25 X 25MM) 1 PLATE 3 WASHER (3/16") 3 LOCKNUT (M6-1.00,PRV TRQ,NLK) 1 HYDROSTAT FRAME HARNESS 1 HIGH FREQUENCY HORN 4 SHIM 1 FLG LOCKNUT (M6-1.00)

DESCRIPTION

REMARKS

SEE FOOTNOTE 1, 2 & 3

SEE FOOTNOTE 2

NOT SHOWN

FOOTNOTES

1. TORQUE BOLT TO 350 ft/lbs.

2. USE SHIMS (REF #22) WHEN MOUNTING NEW CAST NOSE (375-457) ONTO TRACTOR FRAME BEFORE SERIAL NUMBERS LISTED IN FOOTNOTES 4 & 5.

3. REFER TO NOSE CASTING INSTALLATION INSTRUCTIONS 051-420 FOR CORRECT TORQUE SEQUENCE.

NOTE

1. RT75 BEGINS WITH SERIAL NUMBER 5Z0664.

2. RT95/RT115 BEGINS WITH SERIAL NUMBER 5Z0677.

A

809-861

98

TILT STEERING

RT75H / RT75M / RT95H / RT95M 10

22 26

19

1

32 11

8

23

25 16

18 20 2

27 3

15

36 10 36

46 45

10 9

44

12

4

36

5

10 39

21

17

37 48 7 6 5

6

14 31

0 2 1

1

6 7

30

36

40

4 3

4 5 2 3

38 33 10

36

35 6

33

13 47

36 24 34

41

7 34 28

29

43 36 24

12

42

ID0024293

99

TILT STEERING

RT75H / RT75M / RT95H / RT95M REF PART NO. NUMBER

QTY

1. 160-428 1 2. 215-243 1 3. 318-555 1 4. 318-556 1 5. 306-603 1 6. 315-142 1 7. 106-470 4 8. 306-608 1 9. 107-864 4 10. 105-1550 14 11. 306-607 1 12. 306-433 1 499-855 499-856 499-857 499-858 13. 105-185 2 14. 107-580 2 15. 214-301 1 107-580 2 105-680 2 16. 211-067 1 17. 105-680 2 18. 214-852 1 214-961 214-962 19. 211-273 1 20. 362-823 AR 21. 215-1677 1 22. 110-730 1 23. 217-762 1 24. 105-1552 4 25. 165-817 1 26. 105-361 1 27. 106-425 2 28. 105-095 2 29. 106-381 2 30. 318-560 2

DESCRIPTION

STEERING WHEEL F-N-R SHIFTER MAIN CONSOLE CONSOLE CENTER SECTION AUDIO ALARM PEDESTAL FLG SCREW (M16-2.0 X 40mm) BUTTON COVER BOLT (3/8-NC X 1.00", BUT SOC) SCREW (M6-1.00 X 25MM) HORN BUTTON STEERING COLUMN KNOB KIT TILT LEVER KIT SHAFT KIT GAS SPRING KIT ( CYLINDER ) BOLT (#10-24 X 1/2 ", RD SLT) SCREW (M4-0.70 X 16mm, BUT SOC) ACCESSORY SOCKET SCREW (M4-0.70 X 16mm, BUT SOC) NUT (M4, W/LK WSHR) DOME PLUG (.687") NUT (M4,W/LKWSHR) IGNITION SWITCH KEY, PAIR SWITCH MOUNTING NUT 5-GAUGE CLUSTER COVER PLUNGER SWITCH STEERING WHEEL CAP ROCKER SWITCH (SPDT) SCREW (M6-1.00 X 16MM) SWITCH GASKET JAM NUT (13/16 NF) (M5-0.80 X 40mm, SOC) WASHER (1/4") FLG LK SCREW (M8-1.25 X 25MM) ACCESS DOOR

REMARKS

POWERSHIFT UNITS ONLY

OBSOLETE - SEE FOOTNOTE 3 3 W/ POWERSHIFT UNITS, 2 W/ HYDROSTAT UNITS USE ADAPTER HARNESS 215-1780, SEE FOOTNOTE 2 HYDROSTAT UNITS ONLY HYDROSTAT UNITS ONLY NOT USED ON POWER SHIFT UNITS NOT USED ON POWER SHIFT UNITS

NOT SHOWN:

211-078 214-449

1 1

CONNECTOR CAP (TURK RS-CC) DIODE CONNECTOR

FOOTNOTES:

NOTE:

12

ID0024293

100

TILT STEERING

RT75H / RT75M / RT95H / RT95M REF PART NO. NUMBER

QTY

DESCRIPTION

31. 106-049 6 BOLT (#10-24 X 3/4", PLPS) 32. 107-744 2 WASHER (M6) 33. 106-048 8 LOCKNUT (#10-24) 34. 106-574 2 CLIP NUT (M6-1.00) 35. 308-888 1 CUP HOLDER 36. 107-801 18 WASHER (M6) 37. 110-208 1 LEVEL INDICATOR 38. 116-525 1 BUMPER 39. 106-252 2 JAM NUT (5/16-NC) 40. 107-800 2 WING SCREW (M6-1 X 25mm) 41. 318-557 1 CONSOLE BASE 42. 115-686 AR BULK EDGE (5/32",SOLD PER 1") 43. 314-487 1 BRACE 44. 220-1241 1 30 PIN CONTROLLER V3 45. 106-161 2 FLG SCREW (M6-1.00 X 20MM) 46. 106-538 2 LOCKNUT (M6-1.00,PRV TRQ,10.9) 47. 106-386 2 FLG LOCKNUT (M8-1.25) 48. 106-816 2 SCREW M3.5 X 14MM, PH ZPS

REMARKS

USE 1 @ 25" NOT USED ON POWER SHIFT UNITS SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. USED WITH REAR STEER OPTION OR REAR STEER AND CRUISE CONTROL OPTION WHEN UPDATED WITH THE REAR STEER KITS 190-1437 OR 190-1438.

CRUISE ONLY OPTION USES MODULE 220-569 @1X, BOLTS 105-815 @ 2X, AND NUTS 106-048 @ 2X. 2. BEGINS WITH S/N CMWRT95MCB0000380, CMWRT95HHB0000413 3. FOR REPLACEMENT GAUGE CLUSTER ORDER KIT 190-2725.

NOTE:

12

ID0024293

101

102

GAUGE CLUSTER

RT70 / RT75 / RT90 / RT95 / RT115 / HT115

10 3 7 2 4

6

11

5 9

1

8 01

ID0441941

103

GAUGE CLUSTER

RT70 / RT75 / RT90 / RT95 / RT115 / HT115 REF PART NO. NUMBER

QTY

DESCRIPTION

1 362-2747 1 GAUGE CLUSTER PANEL 2 211-1016 1 ANALOG OIL PRESSURE GAUGE (BLACK) 3 211-1014 1 ANALOG WATER TEMP GAUGE (BLACK) 4 211-1019 1 ANALOG TACH (BLACK 5 211-1021 1 FUEL GAUGE BLACK (VOLTAGE) 6 211-1003 1 2.06" VOLTMETER GAUGE (BLACK) 7 220-664 3 INDICATOR DISPLAY 8 107-358 10 WELLNUT (M4-0.7 X 12.67MM LG) 9 362-1313 1 HOLE PLUG 10 107-393 10 SCREW (M4-0.70 X 16MM, BX) 11 214-563 1 RED LED (12V DC)

REMARKS

USE REF# 11 ON MECHANICAL UNITS USED ON MECHANICAL UNITS ONLY

NOT SHOWN:

215-2782

1

RT GAUGE CLUSTER HARNESS

FOOTNOTES:

NOTE:

01

ID0441941

104

BATTERY INSTALLATION

25

18 16

19

5

3

14

3

21 4 31

1 12

13

3

23

30

26

24

6

27

17 2 20

22

15 8

28 3

6

6

3 6

29

3

6 8 9

3

10

7

3 11

05

ID0024314

105

BATTERY INSTALLATION REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

QTY

DESCRIPTION

190-944 DUAL BATTERY CONVERSION KIT 105-814 1 FLG LOCKNUT (3/8-NC) 215-244 - BATTERY (12V 800 AMP) 107-001 10 FLG LK SCREW (M10-1.50 X 25mm) 320-112 1 HOLD DOWN 322-951 1 BATTERY HOLD DOWN 106-387 6 FLG LOCKNUT (M10-1.50) 300-9750 1 CRADLE WELDMENT 106-558 2 CLIP NUT (M10-1.50) 320-116 1 BATTERY TRAY STEP 320-115 1 TRAY SUPPORT 108-067 1 CARRIAGE BOLT (3/8-NC X 2") 107-554 2 BATTERY HOLD DOWN 320-118 1 BATTERY COVER 179-799 1 J-HOOK 116-789 AR RUBBER EDGE TRIM 1/8" (FT) 105-832 1 FLG LOCKNUT (1/4-NC) 215-349 1 BAT CABLE (2 GA X 8", RED) 215-350 1 BAT CABLE (2 GA X 8", BLK) 106-390 2 WASHER (M10) 213-255 1 BAT CABLE (2/0 X 55", RED) 115-320 1 GOMMET (1-1/2") 106-379 2 FLG LK SCREW (M6-1.00 X 20mm) 106-353 2 FLG NUT (M6-1.00) 323-279 1 COVER 213-338 1 BAT CABLE (2/0 GA X 70", BLK) 215-1011 1 BUSSBAR (MAIN FUSE HOLDER) 215-1009 1 MAIN FUSE HOLDER BASE 300-4466 1 FUSE HOLDER MOUNT ASSEMBLY 107-859 2 LOCKNUT, #6-32, NYLON INSERT 106-367 2 SCREW (#6-32 X 1/2" PLPS SS) 215-1010 1 MAIN FUSE HOLDER COVER

REMARKS

INCL'S REF. NO.'S 2,5,14,16-19

SEE FOOTNOTE 1 REFER TO FOOTNOTE 1

USE 3"

NOT SHOWN:

215-375 215-309

BAT CABLE (1/0 GA X 24", BLK) BAT CABLE(4 GA X 20", BLK)

FOOTNOTES:

1.

HOLE IN CENTER OF BATTERY TRAY STEP IS FOR ACCESSING CARRIAGE BOLT WHEN STARTING TIGHTENING PROCESS.

NOTE:

05

ID0024314

106

FUEL TANK 27 6

RETURN 10

43

11 35

36

SUCTION

17 14 15

5

18 20

7 6

4

6

12 2

19

12 16

2

31 3

22 2 21 30

1 23

13 8

33 42 38 39

25

30

41 40

38

29

28 37

9

44 30 32 30 13 34

13

24

26

06

ID0024296

107

FUEL TANK REF PART NO. NUMBER

QTY

DESCRIPTION

1. 194-165 1 FUEL TANK 2. 110-563 3 SPRING CLAMP (3/8") 3. 156-268 1 FUEL STRAINER (04H) 194-505 1 FUEL PICKUP (04H) 4. 364-567 1 FILL NECK 153-760 1 CAP 153-594 2 GASKET, FILL NECK CAP 153-607 1 FLANGE GASKET 153-761 1 FLANGE 107-781 6 HEX SCREW (#10-24 X 5/8") 153-606 1 STRAINER BASKET 5. 156-269 2 S/O COUPLER (04H-05H90) 6. 110-528 4 SNAP-ON CLAMP (.531" TO . 593") 7. 116-108 AR BULK HOSE (5/16", SOLD PER 1") 8. 319-484 1 COVER 9. 106-387 4 FLG LOCKNUT (M10-1.50) 10. 116-108 AR BULK HOSE (5/16", SOLD PER 1") 11. 214-650 1 FUEL SENDER 165-704 1 GASKET 12. 116-325 2 GROMMET (.362") 13. 106-558 4 CLIP NUT (M10-1.50) 14. 156-108 1 S/O COUPLER (08N-08H90) 15. 110-217 1 WORM CLAMP(7/16" TO 1") 16. 116-322 AR BULK HOSE (1/2",SOLD PER 1") 17. 111-021 1 BREATHER CAP (TANK) 18. 105-818 2 BOLT (1/4-NC X 1-1/2") 19. 110-411 1 BOLT-ON CLAMP (3/4", SET) 20. 322-289 1 BACKUP (BOLT-ON) 21. 118-096 AR BULK FUEL TUBING (1/4", PER FT) 22. 118-096 AR BULK FUEL TUBING (1/4", PER FT) 23. 114-002 1 PLUG (06N, SOC) 24. 105-829 2 FLG LK BOLT(1/2 NC X 1") 25. 106-386 2 FLG LOCKNUT (M8-1.25)

REMARKS

BEGINS WITH S/N SEE FOOTNOTE 3

USE 1 @ 72"

USE 1 @ 53"

USE 1 @ 48"

USE 1 @ 24" USE 1 @ 20"

NOT SHOWN:

FOOTNOTES:

1.

2.

3.

ARRANGE LINER PADS IN AN EVEN PATTERN ON INTERIOR SURFACES OF THE SIDE PLATES, BOTTOM PLATE AND KICK PLATE. USE .12 THICK AND .25 THICK TO PROVIDE A SNUG FIT FOR THE TANK. APPLY AND ADJUST THE LINER PADS UNTIL THE LEAST MOVEMENT POSSIBLE HAS BEEN ACCOMPLISHED. ONCE FILLED THE TANK SHOULD NOT SHIFT. LAYER SUPPORT MAT BETWEEN LEDGE OF TANK AND UNDERSIDE OF STEP UNTIL FIRM PRESSURE IS REQUIRED TO ALIGN SLOTS AND INSERT SCREWS ORIENT PADLOCK LUGS AWAY FROM STAIRWELL

NOTE:

06

ID0024296

108

FUEL TANK REF PART NO. NUMBER

QTY

DESCRIPTION

26. 300-9750 1 CRADLE WELDMENT 27. 105-1190 5 BOLT (#10-24 X 1-1/4") 28. 117-425 AR LINER PAD (.12"THK) 117-463 AR LINER PAD (.25"THK) 29. 313-821 1 TREAD, FUEL 30. 107-001 12 FLG LK SCREW (M10-1.50 X 25mm) 31. 117-442 AR SUPPORT MAT 32. 106-198 2 FLG LOCKNUT (1/2 NC, GD8) 33. 313-911 1 LEFT AIR DEFLECTOR 34. 105-831 2 FLG LOCK BOLT (1/2-NC X 1-1/2") 35. 110-333 1 BOLT ON CLAMP (1") 36. 105-033 1 BOLT (5/16-NC X 2") 37. 313-226 - LEFT OUTSIDE FENDER 38. 107-629 3 WASHER (M8) 39. 107-778 2 SCREW (M8-1.25 X 30mm, BUT SOC) 40. 106-640 1 SCREW (M6-1.00 X 20mm, BUT SOC) 41. 106-574 1 CLIP NUT (M6-1.00) 42. 105-003 1 FLG LOCKNUT (5/16-NC) 43. 117-671 1 ABRASION SLEEVE (1" X 12") 44. 319-452 1 CONNECTOR PLATE

REMARKS

SEE FOOTNOTE 1

SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

NOTE:

06

ID0024296

109

110

HYDRAULIC RESERVOIR RT90 / RT95 / RT115 BEGINS WITH S/N 5X0710

7

REAR VIEW OF TANK (ENLARGED) FRONT OF TRACTOR

12

8 5

Y

Relief Valve (149-991) X

10

Suction

28

9 6

1

Z

Return

B

A

3 11

2

Temp

4 21

3 30 2

31

19

18

27 23 19

32

33

25 21

24

34

16 36 33

38

13 26

19

22

19

35

39

34

20 14

29

37

20 19 16 17

08

15

ID0112200

111

HYDRAULIC RESERVOIR RT90 / RT95 / RT115 BEGINS WITH S/N 5X0710 REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1.

150-1388 1 HYDRAULIC RESERVOIR 121-040 - SIGHT GLASS 2. 157-466 1 DRAIN PLUG (1-UNF, .375 ORF) 3. 500-749 1 O-RING (211 D70) 4. 116-322 AR BULK HOSE (1/2", SOLD PER 1") USE 1 @ 48" 5. 322-289 1 BACKUP (BOLT-ON) 6. 110-411 1 BOLT-ON CLAMP (3/4", SET) 7. 105-818 2 BOLT (1/4-NC X 1-1/2") 8. 111-021 1 BREATHER CAP (TANK) 9. 110-217 1 WORM CLAMP (7/16" TO 1") 10. 156-108 1 S/O COUPLER (08N-08H90) 11. 214-854 - TEMPERATURE SWITCH 12. 364-567 1 FILL NECK SEE FOOTNOTE 2 153-760 1 CAP 153-594 1 GASKET, FILL NECK CAP 153-607 1 FLANGE GASKET 153-606 1 STRAINER BASKET 153-761 1 FLANGE 107-781 6 HEX SCREW (#10-24 X 5/8) 13. 106-198 2 FLG LOCKNUT (1/2-NC, GD8) 14. 105-829 6 FLG LK BOLT (1/2-NC X 1") 15. 320-118 1 BATTERY COVER SEE FOOTNOTE 3 16. 106-387 6 FLG LOCKNUT (M10-1.50) 17. 300-9750 1 CRADLE WELDMENT 18. 320-116 1 BATTERY TRAY STEP 19. 107-001 12 FLG LK SCREW (M10-1.50 X 25mm) 20. 106-558 4 CLIP NUT (M10-1.50) 21. 117-425 AR LINER PAD (.12"THK) SEE FOOTNOTE 1 117-463 AR LINER PAD (.25"THK) SEE FOOTNOTE 1 22. 107-778 2 SCREW (M8-1.25 X 30mm, BUT SOC) 23. 313-910 1 RIGHT AIR DEFLECTOR 24. 106-640 1 SCREW (M6-1.00 X 20mm, BUT SOC) 25. 106-574 1 CLIP NUT (M6-1.00) 26. 315-440 1 TOP MUD SHIELD 27. 105-003 1 FLG LOCKNUT (5/16-NC) 28. 157-987 1 S/O COUPLER (20S-16H90,O4NF 514-446 1 REDUCER (24S-20SF) 29. 105-831 2 FLG LK BOLT (1/2-NC X 1-1/2") 30. 110-333 1 BOLT-ON CLAMP (1") 31. 105-033 1 BOLT (5/16-NC X 2") 32. 313-225 - RIGHT OUTSIDE FENDER 33. 106-386 4 FLG LOCKNUT (M8-1.25) 34. 107-629 3 WASHER (M8) 35. 106-162 2 FLG SCREW (M8-1.25 X 20mm) 36. 319-452 1 CONNECTOR PLATE 37. 106-379 2 FLG LK SCREW (M6-1.00 X 20mm) 38. 106-353 2 FLG NUT (M6-1.00) 39. 323-279 1 COVER FOOTNOTES 1.ARRANGE LINER PADS IN AN EVEN PATTERN ON INTERIOR SURFACES OF THE SIDE PLATES, BOTTOM PLATE AND AND KICK PLATE. USE .12" THICK AND .25" THICK TO PROVIDE A SNUG FIT FOR THE TANK. APPLY AND ADJUST THE LINER PADS UNTIL THE LEAST MOVEMENT POSSIBLE HAS BEEN ACCOMPLISHED. ONCE FILLED THE TANK SHOULD NOT SHIFT. 2. ORIENT PADLOCK LUGS AWAY FROM STAIRWELL. 3. REFER TO PAGE "BATTERY INSTALLATION" FOR BATTERY INSTALLATION DETAILS.

08

ID0112200

112

SEAT PLATFORM

RT70H - RT75H - RT95H - RT95M

14

27

15

16

26

29

19 28

12

2

1

3

14

1

27

21 4

7 8 24 30

6

12

5 20

15

16

26

29 12

28 11

17

25

13

18 10 9 23 22

04

ID0024280

113

SEAT PLATFORM

RT70H - RT75H - RT95H - RT95M REF PART NO. NUMBER

1.

QTY

117-924 1 117-925 117-429 1 115-445 115-428 184-252 2 106-333 2 106-031 2 115-430 2 105-267 4 309-431 1 324-563 1 314-594 1 105-273 2 305-649 1 107-312 16 106-574 8 117-314 2 309-294 2 106-159 4 105-876 2 105-089 4 319-158 1 313-411 1 316-479 1 106-391 2 107-001 8 106-387 2 215-1107 1 310-801 1 313-707 2 107-702 2 107-698 2 110-383 2 106-168 2

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

DESCRIPTION

SEAT BELT SET W/5.75" TONGUE SEAT BELT TONGUE (5.75") SEAT REPLACEMENT SEAT ADJUSTABLE TRACK BUSHING (.562" X 1" X .590") SCREW (M12-1.75 X 40mm, 8.8) LOCKNUT (M12-1.75, NLK) SEAT BELT TETHER CUP WASHER (5/16") RIGHT SEAT CONSOLE RIGHT SEAT CONSOLE SEAT BASE SCREW (M12-1.75 X 30mm) LEFT SEAT CONSOLE SCREW (M6-1.00 X 25mm, BUT SOC) CLIP NUT (M6-1.00) ARMREST LOWER ARMREST BRACKET FLG SCREW (1/4-NC X 3/4") SCREW (M10-1.50 X 35mm) LOCKNUT (5/16-NC) Z-GATE Y-GATE PLOW GATE WASHER (M12) FLG LK SCREW (M10-1.50 X 25mm) FLG LOCKNUT (M10-1.50) SEAT SWITCH BLANK UPPER ARMREST BRACKET CARRIAGE BOLT (3/8-NC x 3/4") DOWEL PIN (.375 X .500) KNOB (3/8-NC, BLACK) FLG LK BOLT (1/4-NC X 3/4")

REMARKS

SEE FOOTNOTE 2 USE ON HYDROSTATS WITH CRUISE CONTROL UNITS ONLY

SEE FOOTNOTE 2 USED WITH COMBO ATTACHMENT USED WITH PLOW ATTACHMENT

USED ON MECHANICAL UNITS ONLY

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1.

2.

USE LOCTITE 242 OR EQUIVALENT. NOT USED ON HYDROSTAT UNITS WITH CRUISE CONTROL OPTION

NOTE:

04

ID0024280

114

SEAT SWIVEL AND BASE 1 20

2

21 19 3 4

16 17

10 15

13

14 18

12 9 5

6 7

22

8 11

7 8

13

ID0034153

115

SEAT SWIVEL AND BASE REF PART NO. NUMBER

1 2 3 4 5 6

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

QTY

107-528 1 106-522 1 106-385 1 308-895 1 110-178 2 306-844 1 322-986 1 324-729 1 300-8537 1 106-992 9 107-135 13 117-816 1 179-382 1 115-662 1 110-383 1 308-879 1 106-559 1 117-301 1 107-582 1 115-645 1 106-121 1 106-986 1 107-606 1 105-095 1 300-8446 1

DESCRIPTION

PN10 SLOTTED NUT WASHER (2-1/16") FLG LOCKNUT (M6-1.00) LEVER PLUG (7/8") SEAT BASE SEAT BASE SEAT BASE SEAT BASE FLG LK SCREW (M8-1.25 X 25mm) CLIP NUT (M8-1.25) COMPRESSION SPRING SHIM (.020) GROMMET EDGE (3/16" X 12.7") KNOB (3/8-NC, BLACK) SWIVEL SCREW (M12-1.75 X 25mm) SWIVEL DISK (7" UHMW) SHLD BOLT (3/8" X 1/4", 5/16-NC) COMPRESSION SPRING STUD BOLT (3/8-NC X 1-1/2") FLG LK SCREW (M6-1.00 X 12mm) TANG LOCK WASHER (2") WASHER (1/4") ACCESS PANEL

REMARKS

SEE FOOTNOTE 2

FOR TIER 2 RT90 & RT115 FOR HT115 SEE FOOTNOTE 4 FOR INSTR. & BEG. S/N; FOOTNOTE 5 SEE FOOTNOTE 1

SEE FOOTNOTE 3 SEE FOOTNOTE 1

SEE FOOTNOTE 4 FOR INSTR. & BEG. S/N; FOOTNOTE 5

NOT SHOWN:

FOOTNOTES:

1.

2.

3.

4.

5.

USE LOCTITE 242 OR EQUIVALENT TORQUE SPANNER NUT TO PREVENT ROTATION, THEN REVERSE DIRECTION AND LOOSEN 1/8 OF A TURN. NO LUBRICANT ON ITEM #15 SEAT BASE 300-8537, ACCESS PANEL 300-8446 MUST BE USED TOGETHER. BEGINS WITH SERIAL NUMBERS; RT95ME90000274 RT95HJ90000351 RT115T3T90000125.

USE 2X 106-264 FOR RETAINING 300-8446 TO 300-8537 IF WELDNUTS ARE PRESENT. BEGINS WITH SERIAL NUMBERS; RT95HP90000380 RT95ME90000291 R15T3L90000135.

NOTE:

13

ID0034153

116

BACKFILL BLADE ASSEMBLY RT90, RT95, & RT115

35 6 36

15

4

1 27 26 4

27

2 37

12

26

4

25 27 3

25

OPTION

15

38

4 6

OLD STYLE

13

34

18

14

33 16

6

20 27

14 12

30 29

14

32

30 29 28

24

1 17

9

10 11 21

7 5

15

16

8

4

15 14 23

28

22

24 19

6 4

31 19

15

SEE FOOTNOTE 2

ID0115816

117

BACKFILL BLADE ASSEMBLY RT90, RT95, & RT115 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

QTY

105-416 2 178-572 1 151-057 125-771 5 300-7763 1 181-982 1 107-434 1 106-164 1 181-981 1 183-767 1 125-770 1 125-822 2 331-475 1 125-773 4 106-470 4 181-975 2 178-584 1 183-768 1 308-921 1 151-070 300-8635 1 151-202 178-532 1 314-104 2 178-394 2 105-475 2 105-830 4 106-012 6 309-138 2 106-383 2 331-751 1 322-360 2 106-330 4 106-386 4 105-1187 2 105-1188 2 107-537 2 300-8460 2

DESCRIPTION

WASHER (5/8") PIN (1.75" X 12.75") CYL (2.0" X 1.25" X 8.0") COMPOSITION BUSHING (1.25") PIN TAPERED INSERT (1.25") ROLL PIN 3/8 X 1-5/8 FLG LK SCREW (M10-1.50 X 30mm) TAPERED INSERT (1") TAPERED PIN (25.4mm X 60mm) COMPOSITION BUSHING (1") COMPOSITION BUSHING (1.750") PIVOT COMPOSITION BUSHING (1.750") FLG SCREW (M16-2.00 X 40mm) TAPERED INSERT (1.75") TAPERED PIN (1.750" X 13.90") TAPERED PIN (44.4mm X 205mm) LIFT ARM CYL (3" X 1.75" X 8") LOW ANGLE BACKFILL BLADE, 80" CYL (2" X 1" X 3.38") PIN (1.750" X 7.000") TILT BLADE RETAINER TAPERED PIN (1.250" X 4.250") WASHER (1/2") FLG LK BOLT (1/2-NC X 1-1/4") FLANGE BOLT (5/8-NC X 3") RETAINER FLG LK SCREW (M10-1.50 X 30mm) 80" CUTTING EDGE FITTING GUARD (3.0" CYL) SCREW (M8-1.25 X 70mm) FLG LOCKNUT (M8-1.25) SCREW (M10-1.5 X 35mm) TAPERED PIN (1.250" X 2.560") SCREW (M10-1.5 X 20mm) TAB PIN (1.250" X 2.57")

REMARKS

SEE FOOTNOTE 2

SEE FOOTNOTE 1

OPTION OPTION OPTION USE LOCTITE 242 USE LOCTITE 242

NOT SHOWN:

FOOTNOTES:

1. BACKFILL BLADE 300-4321 IS SUPERSEDED BY 300-8635 ON RT90, RT95, AND RT115.

RT95M BEGINS WITH S/N CMWRT95MJ90000296 RT95H BEGINS WITH S/N CMWRT95HK90000364 RT115 BEGINS WITH S/N CMWR15T3K90000130 2. EARLIER MODELS USE P/N 183-766 TAPERED PIN (31.7mm X 90MM) WITH 106-469 FLG SCREW (M12-1.75 X 30mm)

NOTE:

15

ID0115816

118

4 POST ROPS

BEGINS WITH S/N 5W0527 HYDROSTAT UNITS BEGINS WITH S/N 5Y0468 POWERSHIFT UNITS

11

8

1

5 3

9

9

4 10

7 2

6 05

ID0023950

119

4 POST ROPS

BEGINS WITH S/N 5W0527 HYDROSTAT UNITS BEGINS WITH S/N 5Y0468 POWERSHIFT UNITS REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11

1 ANGUS-PALM ROPS 4 SCREW (3/4-NC X 5", GD5) SPEC. 1 BULK EDGE (1/8", SOLD PER FT) 8 SHOCK MOUNT 8 NUT (3/4-NC) SPECIAL 4 SCREW(3/4-NCX4-1/2",GD5)SPEC. 4 ISOLATOR IRON 3 POP RIVET (3/16" X .664") 3 BULK EDGE (3/16", SOLD PER FT) 1 CHECK GAGE 1 MANUAL COMPARTMENT

301-1473 107-923 116-421 117-973 107-924 107-922 320-240 110-348 117-344 320-745 250-063

DESCRIPTION

REMARKS

REPLACES 320-250 4 POST ROPS, SEE NOT SHOWN FOR SERVICE PART SEE FOOTNOTE 1 USE 1 @ 2.5' SEE FOOTNOTE 2 USE 2 @ 1.0', USE 1 @ 3.5'

NOT SHOWN:

500-2428

ROPS HEADLINER

FOOTNOTES:

1. SCREW (107-923) HAS GOLD PLATING TO DISTINGUISH IT FROM SCREW (107-922). PROPER LOCATION IS IMPORTANT FOR PROPER ASSEMBLY OF THE ROPS. TORQUE TO 200 Ft.Lbs, USE LOCTITE 271 OR EQUIVALENT. 2. SCREW (107-922) HAS SILVER PLATING TO DISTINGUISH IT FROM SCREW (107-923). PROPER LOCATION IS IMPORTANT FOR PROPER ASSEMBLY OF THE ROPS. TORQUE TO 200 Ft.Lbs, USE LOCTITE 271 OR EQUIVALENT.

NOTE:

05

ID0023950

120

CAB KIT

RT75, RT95, RT115, RT100 & RT120

15 12

12

46

38 12 36

Low High Park Switch X

G R I

FRONT WIPER MOTOR ELECTRICAL HOOK-UP DETAIL

33

ROPS TUBE 35 41 42 47 48 39 40 49 30

18

25

23 22

19 20

24

30

16 34

.

OPEN E IS IN TOTH D PARTS GE ATE LE DOOR A S OCI WHI I N DAM A S C AB ES ULT AND N FO R DOOR T IO ON CAN OPERA IT POSI

25

4 5D 3 1 6

21

13

17 31 28 26

27 14

57

29

26

25

22

ID0028095

121

CAB KIT

RT75, RT95, RT115, RT100 & RT120 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

QTY

191-179 499-436 1 499-437 1 121-044 1 499-747 499-748 121-045 1 121-046 1 121-047 1 117-829 21 318-374 1 318-358 1 318-359 1 318-375 2 318-376 2 318-377 2 107-786 32 214-897 1 499-441 2 499-438 2 119-003 1 318-360 1 318-361 1 318-362 1 318-363 1 117-825 1 117-854 1 117-821 1 117-855 1 117-856 2 273-279 1 117-824 1 117-857 1 105-085 4 107-787 4 107-788 8 107-789 4 166-450 1 117-823 1 117-858 1 499-440 1 117-828 4 499-439 1 107-245 4

DESCRIPTION

REMARKS

CAB KIT DOOR ASSY (RIGHT) DOOR ASSY (LEFT) SLIDER ASS'Y (REAR) WINDOW FRAME REAR WINDOW SIDE WINDOW (LEFT) SIDE WINDOW (RIGHT) FRONT WINDOW SEAL, PSA DOUBLE D U-CLAMP DOORPOST (LEFT) DOORPOST (RIGHT) BRACKET, LOWER DOOR POST WINDOW RETAINING CLIP PLATE SCREW, (#10-32 X 1-1/2") HEX WIPER MOTOR DOOR STRAP GAS SPRING STRUT SPACER, WIPER MOTOR CAM LATCH COVER (RIGHT) CAM LATCH COVER (LEFT) INNER BRACKET (RIGHT) INNER BRACKET (LEFT) L. LATCH, PADDLE W/KEY R. LATCH, PADDLE W/KEY LEFT ROD, DOOR LINKAGE RIGHT ROD, DOOR LINKAGE ROD, DOOR LINKAGE WARNING TAG LEFT LATCH, ROTARY RIGHT LATCH, ROTARY LOCKNUT (1/4-NC) SCREW (1/4-20 X 1-1/4) TRUS,TORX SCREW (1/4 X 5/8)TRUS, TORX T27 SCREW (#10-24 X 1/2 ") TRUS, TORX STUD, CYLINDER LEFT HANDLE, INSIDE RIGHT HANDLE, INSIDE INSIDE DOOR BEZEL RETAINER, INTERNAL TOOTH DOOR PULL FLG LK BOLT (3/8-NC X 3/4", NLK)

INCL. REF. #'S 1-57

SEE NOT SHOWN FOR REPLACEMENT LATCH. OBSOLETE

COMES WITH SNAP-ON COVER

NOTES:

MOUNTING A CAB ON THE RT70/RT90/RT115 1. A CAB CAN BE MOUNTED DIRECTLY ON RT70M OR RT90M WHEN OLD ROPS HAS NOT BEEN MODIFIED WITH THE NEW ISOLATORS. 2. A CAB CAN NOT BE MOUNTED ON A RT70H, RT90H OR RT115H WHEN AN OLD ROPS HAS BEEN MOFIFIED WITH THE NEW ISOLATORS. 3. A CAB CAN BE MOUNTED ON A RT70H, RT90H OR RT115H WITH A NEW ROPS WITH THE NEW ISOLATORS.

22

ID0028095

122

CAB KIT

RT75, RT95, RT115, RT100 & RT120

50 51 53 4

52

55

5

11

45 40

56

32

9 54

54

54 11 1 44

6 7

22

9 37

3 10

2

8 43

ID0028095

123

CAB KIT

RT75, RT95, RT115, RT100 & RT120 REF PART NO. NUMBER

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

46.

47.

48.

49.

50.

51.

52.

53.

54.

55.

56.

57.

QTY

121-048 1 121-049 1 121-050 1 121-051 1 318-364 1 318-365 1 121-052 1 105-047 4 121-053 1 106-991 8 106-415 8 117-826 1 117-827 1 106-565 8 106-469 8 106-709 8 105-895 4 105-865 1 105-151 2 105-059 2 117-861 2 107-778 2 318-879 1 107-135 2 344-115 1 107-875 6 116-866 AR 110-249 1 118-357 1

DESCRIPTION

REMARKS

SLIDER, (LEFT DOOR) SLIDER, (RIGHT DOOR) GLASS (LOWER DOOR), LEFT GLASS (LOWER DOOR), RIGHT RIGHT DOOR LEFT DOOR WIPER BLADE LOCKNUT (3/8-NC) WIPER ARM FLG LK SCREW (M8-1.25 X 20mm) WASHER (.406") STRIKE BRACKET (RIGHT) STRIKE BRACKET (LEFT) NUTSERT, (M8-1.25) FLG SCREW (M12-1.75 X 30mm) FLG LK NUT (M12-1.75) LOCK WASHER (3/8") BOLT (1/4-NC X 3/4", GD8) LOCKNUT (7/16-NC) WASHER (7/16) STRIKER BOLT SCREW (M8-1.25 X 30mm, BUT SOC) BOTTLE BRACKET CLIP NUT (M8-1.25) WINDSHIELD WASHER TANK WASHER (.400" ID. BRASS) BULK HOSE (3/16", SOLD PER 1") WORM CLAMP (1/4"TO 5/8") EXTENSION SPRING

SEE NOT SHOWN FOR REPLACEMENT LATCH. SEE NOT SHOWN FOR REPLACEMENT LATCH.

URETHANE ADHESIVE KEYS (RT TRACTOR CAB) CLIP LEFT SLIDER LATCH REAR RIGHT SLIDER LATCH REAR LEFT SLIDER LATCH RIGHT SLIDER LATCH KNOB KIT, SLIDER WINDOW

10.5 FL. OZ. TUBES REPLACEMENT KEYS RETAINS STRUT 499-438 ONTO STUD 166-450 USED ON 121-044 SLIDER (REAR) USED ON 121-044 SLIDER (REAR) USED ON 121-048 SLIDER (LT DOOR) USED ON 121-049 SLIDER (RT DOOR)

USE 1 @ 150"

NOT SHOWN:

256-669 2 105-1305 1 115-1014 2 500-2067 500-2068 500-2069 500-2070 500-2450

NOTES:

22

ID0028095

124

CAB HEATER ASS'Y RT95 TIER2

TO

PR ES

SU R

3

ET

AN

7

K

11 15

TO

39 6

K AN ET

16

38 2

10

31 9

20 R SU ES PR

36 19

13 11 12 30

3

18 17

16 23

26

24

40 25

8

1

11

21

29 34

28

5 37 22 21

32

27

33

35

14

11 4

05

11

ID0024284

125

CAB HEATER ASS'Y RT95 TIER2 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

QTY

191-377 191-376 499-802 1 194-439 1 499-837 1 116-044 AR 499-705 1 116-044 AR 115-106 1 499-833 4 117-344 AR 514-085 1 156-260 1 110-217 8 155-164 1 110-249 1 117-622 1 514-159 1 107-358 6 107-597 4 107-580 4 107-852 16 117-397 1 106-992 4 107-135 106-640 106-388 106-574 110-030 1 117-396 1 106-386 4 117-265 1

DESCRIPTION

A/C HEATER KIT HEATER KIT MODEL EE320, HVAC, 12V HEATER CONTROL PANEL, FAN-AC-HT BULK HOSE (5/8" , SOLD PER 1") HEATER VALVE BULK HOSE (5/8" , SOLD PER 1") REDUCER (06N-04NF) LOUVER MOUNT, 3.1" HOLE BULK EDGE (3/16", SOLD PER FT) REDUCER (08N-06NF) STREET ELBOW (06N-06NF90) WORM CLAMP (7/16"TO 1") S/O COUPLER (04N-05H90) WORM CLAMP (1/4"TO 5/8") ABRASION SLEEVE (1.25" X 20") S/O TEE (10H) WELLNUT (M4-0.7 X 12.67mm LG) WASHER (M4) SCREW (M4-0.70 X 16mm, BUT SOC) SCREW (#8 X 5/8" CSK PLPS) ABRASION SLEEVE (1.25" X 35") FLG LK SCREW (M8-1.25 X 25mm) CLIP NUT (M8-1.25) SCREW (M6-1.00 X 20mm, BUT SOC) WASHER (M6) CLIP NUT (M6-1.00) CABLE TIE (1/16" TO 4") ABRASION SLEEVE (1.25" X 28") FLG LOCKNUT (M8-1.25) ABRASION SLEEVE (1.75" X 50")

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 2 USE 2 @ 90" USE 1 @ 22"

USE 1 @ 16"

NOT SHOWN:

05

ID0024284

126

CAB HEATER ASS'Y RT95 TIER2 REF PART NO. NUMBER

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

QTY

155-112 1 155-017 1 108-113 2 318-811 1 322-986 115-662 1 362-1233 1 105-814 4 322-871 1 107-393 2 157-333 1

DESCRIPTION

S/O COUPLER (06N-10H) SERVICE TEE (06N-06NF-06NF) SCREW (#6-19 X 1-1/4" PLASTIC) VALVE BRACKET SEAT BASE GROMMET EDGE (3/16" X 12.7") REAR PANEL W/ AC DUCT FLG LOCKNUT (3/8-NC) TDM COVER SCREW (M4-0.70 X 16mm, BX) HOLE PLUG (.750")

REMARKS

SCREWS ONTO STUD BOLTS ON BOTTOM OF REF #1 (499-802)

NOT SHOWN:

213-174 499-704 499-829 499-830 499-831 499-834 499-835 499-842 499-843 499-844 255-008 499-707 499-708 499-709 499-838 499-839 499-840 194-289 213-041 217-826 362-823

05

SWITCH, THERMOSTAT BLOWER MOTOR COIL, EVAP COIL, HEAT VALVE, EXP BLOCK WIRE HARNESS RECIRCULATION AIR FILTER HOSE, DRAIN FTG, DRAIN CONDENSATE VALVE REFRIGERANT (30 LB. BOTTLE) BLOWER SWITCH A/C SWITCH WATER VALVE CONTROL BRACKET, CONTROL PANEL DECAL CONTROLS KNOB, POINTER PUSH ON A/C HEATER KIT A/C HARNESS MINI RELAY (SPDT) COVER, FITS IN SLOT ON REAR PANEL

ID0024284

127

128

AIR CONDITIONING KIT 32

26

22 27

23 1

8

30

35 2 24

36

7 6

37 28 25

TO

EX PA NS IO N

29

VA LV E

33 13 34 21 11

5 9 31 3

19 16

10 12 13 14

20

17

15 18

2.50

B

4

FR O

M

EX PA NS IO

NV AL VE

809-209

129

AIR CONDITIONING KIT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

QTY

DESCRIPTION

191-358 A/C-HEATER KIT 499-836 1 CONDENSER COIL 499-205 1 RECEIVER DRIER 499-706 1 COMPRESSOR 499-841 1 COMPRESSOR FITTING 499-845 1 HOSE (#10 X 90" EVP-CP) 499-846 1 HOSE (#08 X 55" CP-CND) 499-847 1 HOSE (#06 X 36" CND-RD) 499-848 1 HOSE (#06 X 118" RD-EVP) 214-946 1 BINARY SWITCH 107-197 1 SCREW (M16-2.00 X 80mm,10.9) 170-359 1 BALL BEARING V-PULLEY IDLER 179-723 1 SPACER 307-980 1 SLIDE BAR 106-089 2 NUT (M12-1.75, 10.9) 106-720 1 SCREW (M12-1.75 X 70mm) 105-089 4 LOCKNUT (5/16-NC) 319-917 1 COMPRESSOR MOUNT 105-190 2 BOLT (5/16-NC X 2-3/4") 179-726 2 SPACER 106-077 1 HEX NUT (M16-2.00, 10.9) 106-333 1 SCREW (M12-1.75 X 40mm, 8.8) 105-876 3 SCREW (M10-1.50 X 35mm) 106-386 2 FLG LOCKNUT (M8-1.25) 184-239 2 SPACER 107-872 2 SCREW (M8-1.25 X 65MM) 115-687 2 ABRASION SLEEVE (SOLD PER FOOT) 306-769 4 MOUNT BAR 106-987 4 FLG LK SCREW (M6-1.00 X 16mm) 171-007 1 COMPRESSOR BELT 170-365 1 DRIVE PULLEY 105-836 4 FLG LOCK BOLT (1/4-NC X 1/2") 105-160 2 BOLT (5/16-NC X 1-1/4") 307-909 - FRONT HOOD SUPPORT 107-001 1 FLG LK SCREW (M10-1.50 X 25MM) 106-654 1 FLG LK SCREW (M10-1.50 X 16MM) 194-283 - RADIATOR/SPLIT COOLER 306-459 - RADIATOR/OIL COOLER 194-521 - 21.8" METAL BLADE PULLER FAN 194-052 - FAN SPACER

REMARKS

INCL. REF. #'S 1-34.

SEE FOOTNOTE 1

SEE FOOTNOTE 1 SEE FOOTNOTE 1

USE 2 @ 2'

USED ON MECHANICAL UNITS USED ON HYDROSTAT UNITS

FOOTNOTES

1-

USE LOCTITE 242 OR EQUIVALENT.

NOTE:

B

809-209

130

131

132

133

134

TAPE DISPENSER

1

4 5

3

6 2

4 5 8

7 8

05

ID0263926

135

TAPE DISPENSER REF PART NO. NUMBER

1 2 3 4 5 6 7 8

190-1637 301-1490 301-1399 301-1491 105-258 105-098 105-047 301-1492 105-714

QTY

DESCRIPTION

- TAPE DISPENSER 1 PLATE 1 MOUNT 2 RING 3 BOLT (3/8-NC X 3-3/4") 3 BOLT (3/8-NC X 3") 3 LOCKNUT (3/8-NC) 1 COLLAR 2 SET SCREW (3/8-NC X 1", SQ)

REMARKS

INCL'S REF #'S 1 THRU 8

RT80 & RT55 HT/RT115 & QUAD RT45

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0263926

136

NOTES:

ID0134963

137

CONTROL COMPONENTS

ID0135065

138

GRND SPEED DIRECTION HAND CNTL HYDROSTAT CABLE LOCATION

1

23 POWER SHIFT CABLE LOCATION

22

9

25

14

8

5

24 26 20

7

6

17

3 19

21

4

13 28

2 10

11

28 18 27 17

16 12

K

15

806-228

139

GRND SPEED DIRECTION HAND CNTL REF PART NO. NUMBER

1 110-445 2 319-914 3 107-529 4 116-980 5 196-287 6 331-166 7 106-048 8 106-205 9 110-318 10 105-810 11 110-697 12 309-227 13 107-770 14 105-245 15 107-001 16 107-769 17 105-832 18 310-127 19 105-284 20 110-348 21 115-598 22 106-987 23 117-519 24 315-149 25 106-271 26 316-476 27 106-396 28 106-261

QTY

DESCRIPTION

1 KNOB (3/8-NC, ORANGE) 1 RIGHT CONTROL 1 WASHER UHMW (3/8) 2 SHOCK MOUNT 1 CONTROL CABLE 2 BOLT-ON BACK-UP (.306") 2 LOCKNUT (#10-24) 2 WASHER (.191") 1 BALL JOINT (#10-32, FM) 2 BOLT (#10-24 X 7/8", SOC) 1 BOLT-ON CLAMP (.360") 1 CONTROL LEVER FRAME 1 LOCKNUT (1/4-NF, NYL INSERT) 1 SCREW (M10-1.50 X 25MM) 4 FLG LK SCREW (M10-1.50 X 25MM) 2 JAM NUT (M10-1.50) 4 FLG LOCKNUT (1/4-NC) 1 PIVOT PLATE 2 WASHER (3/16") 2 POP RIVET (3/16" X .664") 1 SPRING DETENT 2 FLG LK SCREW (M6-1.00 X 16MM) 1 CONTROL HANDLE 1 DETENT TIP 2 SCREW (M5-0.80 X 8MM, PLPS) 1 TEMPLATE 1 WASHER (M10, HARDENED) 4 WASHER (.334")

REMARKS

SEE FOOTNOTE 3 AND INCLUDES HARDWARE SEE FOOTNOTE 4

SEE FOOTNOTE 2

SEE FOOTNOTE 1

FOOTNOTES

1. USE LOCTITE 242 OR EQUIVALENT 2. TORQUE TO 70 IN.-LBS. 3. IF ORDERING THIS PART FOR MACHINE WITH S/N ___________ OR OLDER, YOU MUST ALSO ORDER LEVER (#319-916) AND REFER TO PARTS PAGE "GRD SPEED DIRECTION FOOT CONTROL", IF THIS UNIT IS EQUIPPED WITH CRUISE CONTROL, PART 319-916 IS NOT NEEDED. 4. 196-287 IS FOR HYDROSTAT TRACTORS. USE 194-196 FOR POWER SHIFT TRACTORS.

NOTE:

K

806-228

140

HAND THROTTLE

BEGINS WITH S/N 5Y0227

9 17 25 17 8

26

11 7

15 16

12 20

19 11

18

3

7 12 2 4

6

14 4 5

1 13 02

20

10 5

ID0025136

141

HAND THROTTLE

BEGINS WITH S/N 5Y0227 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

QTY

306-619 1 117-593 1 324-666 1 194-539 1 106-850 2 106-987 2 106-353 2 107-744 2 115-604 1 506-021 2 196-058 1 106-205 1 505-114 1 106-640 2 106-574 2 106-018 2 106-991 1 106-386 1 110-373 1 105-095 2 106-138 2 107-465 2 215-1447 1 307-069 307-068 -

DESCRIPTION

CONTROL LEVER KNOB (ORANGE) CONTROL BRACKET CONTROL CABLE LOCKNUT (M5-0.80) FLG LK SCREW (M6-1.00 X 16mm) FLG NUT (M6-1.00) WASHER (M6) COMPRESSION SPRING NUT (#10-32) CABLE SWIVEL (.081") WASHER (.191") THRUST WASHER (.343") SCREW (M6-1.00 X 20mm ,BUT SOC) CLIP NUT (M6-1.00) JAM NUT (3/8-NF) FLG LK SCREW (M8-1.25 X 20MM) FLG LOCKNUT (M8-1.25) BOLT-ON CLAMP (13/16") WASHER (1/4") NUT (M5-0.8.)

SCREW (M5-0.80 X 30MM, SOC) PROXIMITY SWITCH 12MM EUROFAST LEVER BRACKET CABLE BRACKET

REMARKS

USE LOCTITE 242 OR ITS EQUIVILENT

POWERSHIFT ONLY & REFER TO F/N 1

NOT SHOWN:

FOOTNOTES:

1. PROXIMITY SWITCH 215-1447 SUPERCEDED PROXIMITY SWITCH 213-272

NOTE:

02

ID0025136

142

FOOT THROTTLE 10 5 12

13 11

BACKHOE THROTTLE HAND THROTTLE FOOT THROTTLE

8

2

1 8

7 6 9

4

3

01

3

ID0151752

143

FOOT THROTTLE REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13

307-530 307-515 194-133 506-021 107-770 105-095 106-386 107-135 106-992 110-318 506-021 307-068 307-069 117-959

QTY

DESCRIPTION

1 1 1 1 1 1 2 4 6 1 2 1

BASE THROTTLE PEDAL CONTROL CABLE (110.0") NUT (#10-32) LOCKNUT (1/4-NF, NYL INSERT) WASHER (1/4") FLG LOCKNUT (M8-1.25) CLIP NUT (M8-1.25) FLG LK SCREW (M8-1.25 X 25mm) BALL JOINT (#10-32, FM) NUT (#10-32) CABLE BRACKET LEVER BRACKET EXTENSION SPRING

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0151752

144

POWERSHIFT LEVER

1

4 27

FRONT OF TRACTOR ORIENTATION OF 118-087

3 5

38

21

1.55

26

23 25

7

1.55

23 29

2

7

21 22 23

21 3

5

28 10

9

21

36

37

35

39

19

23

25

4

4

31

15 32 30 6

18

32 30

13 8

9

11

30 30

16

17

31 28

24

35 10

12 6

20 34 20

05

33

14 8

ID0064457

145

POWERSHIFT LEVER REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

QTY

DESCRIPTION

110-375 1 KNOB (1/2-NC, YELLOW) 306-954 1 SHIFT ARM 125-488 2 FLANGE BUSHING (.875") 106-992 8 FLG LK SCREW (M8-1.25 X 25mm) 106-386 4 FLG LOCKNUT (M8-1.25) 106-397 2 WASHER (M12, HARDENED) 125-174 4 BRONZE BUSHING (.375"X.500") 107-004 2 FLG LK SCREW (M12-1.75 X 45mm) 105-244 AR WASHER (1/2") 106-354 2 FLANGE NUT (M12-1.75) 106-447 1 JAM NUT (1/2-NF) 107-573 1 JAM NUT (1/2-NF, LH) 110-290 1 ROD END (1/2-NF, FM) 107-574 1 ROD END (1/2-NF, FM, LH) 105-832 2 FLG LOCKNUT (1/4-NC) 117-019 1 COMPRESSION SPRING 306-762 1 SHIFT ROD 106-131 1 DOWEL PIN (.187 X 1.000) 306-666 1 SPRING ROD 316-939 1 SWITCH BRACKET 307-568 1 SPRING MOUNT 105-509 4 COTTER PIN (1/8" X 1") 375-395 1 LEVER 105-117 4 WASHER (5/16") 375-396 1 LEVER 110-306 2 CLEVIS PIN (3/8" X .890") 307-585 1 BELLOW 118-074 1 DUST SHIELD 307-580 1 BELLOW MOUNT 105-047 2 LOCKNUT (3/8-NC) 306-763 1 SHIFT LINK 106-539 4 JAM NUT (M8-1.25) 105-883 2 FLG LK BOLT (3/8-NC X 2") 106-892 2 SCREW (M8-1.25 X 50mm) 107-002 2 FLG LK SCREW (M10-1.50 X 30mm) 106-266 2 FLG NUT(M10-1.50) 217-269 1 PROXIMITY SWITCH 215-1447 1 PROXIMITY SWITCH 106-168 2 FLG LK BOLT (1/4-NC X 3/4") 329-489 1 MOUNT 118-087 1 DUST SHIELD 329-488 1 MOUNT

REMARKS

BEFORE S/N AFTER S/N

OBSOLETE

BEFORE S/N AFTER S/N__________ & REFER TO FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. PROXIMITY SWITCH 215-1447 SUPERCEDES PROXIMITY SWITCH 213-272.

NOTE:

1. ADD LOCTITE 242 TO ALL ADJUSTMENT SCREW THREADS

05

ID0064457

146

BFB BLADE CONTROLS 1 2 3

10

13

11 25

4

22 23 21 24 8 20 19

5 6 7

11 8 13 12 13 15

8 4

16 11

9 10

13

11 18

12

17 14 16

05

15

ID0235632

147

BFB BLADE CONTROLS REF PART NO. NUMBER

QTY

1 117-345 2 305-728 3 105-263 4 178-421 5 110-330 6 107-312 7 305-727 8 107-770 9 105-387 10 160-540 11 105-152 12 179-884 13 106-076 14 107-790 15 110-082 16 105-508 17 105-878 18 179-885 19 105-085 20 305-724 21 105-284 22 105-087 23 110-565 24 110-281 25 107-582

1 1 2 2 1 4 1 3 1 2 4 2 5 3 4 4 3 1 1 1 1 1 1 1 1

DESCRIPTION

CONTROL HANDLE HANDLE ASSEMBLY BOLT (1/4-NC X 3/4", CSK, SOC) BUSHING DUST BOOT SCREW (M6-1.00 X 25MM, BUT SOC) MOUNT ASSEMBLY LOCKNUT (1/4-NF, NYL INSERT) LOCKNUT (3/4-NF) ROD END NUT (1/4-NF) ROD WASHER (1/4") CLEVIS (1/4-NF-LH) CLEVIS PIN (1/4 X 11/16) COTTER PIN (3/32" X 1") NUT (1/4-NF, LH) ROD (16.62") LOCKNUT (1/4"-NC) LINKAGE PLATE WASHER (3/16") BOLT (1/4-NC X 7/8", SOC) BALL JOINT (1/4-NF) ROD END (1/4-NF, FM) SHLD BOLT(3/8" X 1/4",5/16-NC)

REMARKS

USE LINKAGE ROD 306-767 ON EARLIER MACHINES

USE LINKAGE ROD 107-581 ON EARLIER MACHINES

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0235632

148

REAR STEER CONTROL KIT

13

12 15 14

1 3

2 4

7

11 16

5

6

9

8

10 02

ID0142805

149

REAR STEER CONTROL KIT REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 2 1 1 1 1 1 1 1 2 2 2 2 1 1 1

318-366 179-416 125-447 318-367 166-449 217-273 115-598 105-529 179-418 106-120 107-785 107-744 107-193 117-887 105-522 105-161

DESCRIPTION

MOUNT PLATE BOSS BUSHING BOTTOM PLATE SHAFT POSITION POTENTIOMETER SPRING DETENT ROLL PIN (5/16" X 1-1/2") BUSHING SCREW (#10-24 X1-3/4",PAN SLT) SHLD BLT(1/4" X 1-1/4",#10-24) WASHER (M6) SCREW (M6-1.00 X 16MM,BUT SOC) KNOB ROLL PIN (3/16" X 3/4") BOLT (1/4-NC X 3/4", SOC)

REMARKS

SEE FOOTNOTE 1

SEE FOOTNOTE 2 SEE FOOTNOTE 2

SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. P/N 191-221 REAR STEER CONTROL KIT INCLUDES REFERENCE # 1-16 2. USE LOCTITE 242 OR EQUIVALENT

NOTE:

REFER TO INSTALLATION INSTRUCTION 051-319 FOR REAR STEER UPGRADE KIT INFORMATION..

191-251 IS THE REAR STEER UPGRADE KIT AND 259-516 IS THE REAR STEER ALIGNMENT (SPECAIL TOOL) .

REFER TO O-RING CHART (800-301) FOR REPLACEMENT O-RINGS.

02

ID0142805

150

HYDROSTATIC PUMP LINKAGE ENDS WITH S/N____________.

2 31 10 3

34 27

9

30

33

11 24

12 31

4

21 1

32

2 13

3

25

20

3

23

3

16

28

29

19 18

25

17

7

16

5 26

18

04

26

8 22

16 14

6

15

ID0139933

151

HYDROSTATIC PUMP LINKAGE ENDS WITH S/N____________.

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

315-735 110-318 106-678 194-196 315-484 105-106 106-386 315-483 105-810 106-205 331-166 110-697 107-092 106-528 179-301 116-142 125-491 117-614 105-699 181-636 106-989 179-302 313-954 217-269 105-069 105-047 105-811 105-162 315-536 315-646 107-268 107-516 105-680 107-597

QTY

1 2 6 1 1 1 1 2 2 1 1 3 4 1 2 1 4 2 1 1 1 1 1 2 2 2 2 1 1 4 2 2 4

DESCRIPTION

REMARKS

REAR SUPPORT (AUX DRIVE PUMP) BALL JOINT (#10-32, FM) LOCKNUT (1/4-NF) CONTROL CABLE (116") CAM PLATE BOLT (1/4-NC X 2") FLG LOCKNUT (M8-1.25) PUMP TRUNNION LEVER BOLT (#10-24 X 7/8", SOC) WASHER (.191") BOLT-ON BACKUP (.360") BOLT-ON CLAMP (.360") WASHER (.254") SCREW (M6-1.00 X 20mm, SOC) BRONZE BUSHING (.375) SHOCK MOUNT CAM YOKE ROLLER BEARING FRICTION WASHER (.781") BOLT (1/4-NF X 1-1/4") BUSHING FLG LK SCREW (M8-1.25 X 35mm) SLEEVE (.250) CABLE CONNECTOR PROXIMITY SWITCH WASHER (.406") LOCKNUT (3/8-NC) LOCKNUT (#10-24) BOLT (3/8-NC X 2-1/4") INNER CONTROL ARM PROXIMITY SWITCH MOUNT SCREW (M4-0.70 X 20mm, SOC) CLIP NUT (M4-.7) NUT (M4, W/LK WSHR) WASHER (M4)

SEE FOOTNOTE 1

SEE FOOTNOTE 2

SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. TO ATTACH BRACKET (REF #5) USE THE TWO INSIDE BOLTS LOCATED IN THE REAR OF THE FRONT PUMP ON THE SAME SIDE AS THE TRUNION SHAFT. 2. APPLY LOCTITE BEFORE ASSEMBLY.

NOTE:

04

ID0139933

152

HYDROSTATIC PUMP LINKAGE BEGINS WITH S/N CMWRT95MK90000264

4 2

11 3

10

9

34

33

35

30 12

34

24

27

10

32

31 1

2

21

13 28 3 34 3

20

3

23

25

18

19 17

5

25 8

3 18

7

26 16

26 22 15

06

29

14 6

ID0152909

153

HYDROSTATIC PUMP LINKAGE BEGINS WITH S/N CMWRT95MK90000264 REF PART NO. NUMBER

QTY

1 315-735 2 110-318 3 106-678 4 194-196 5 315-484 6 105-106 7 106-386 8 315-483 9 105-810 10 106-205 11 331-166 12 110-697 13 107-092 14 106-528 15 179-301 16 116-142 17 125-491 18 117-614 19 105-699 20 181-636 21 106-989 22 179-302 23 313-954 24 215-1175 25 105-069 26 105-047 27 105-811 28 105-162 29 315-536 30 300-6250 31 107-414 32 106-574 33 105-680 34 105-284 35 106-640

1 2 6 1 1 1 1 1 2 2 1 1 3 4 1 2 1 4 2 1 1 1 1 1 2 2 2 2 1 1 2 2 2 5 2

DESCRIPTION

REAR SUPPORT (AUX DRIVE PUMP) BALL JOINT (#10-32, FM) LOCKNUT (1/4-NF) CONTROL CABLE CAM PLATE BOLT (1/4-NC X 2") FLG LOCKNUT (M8-1.25) PUMP TRUNNION LEVER BOLT (#10-24 X 7/8", SOC) WASHER (.191") BOLT-ON BACK-UP (.306") BOLT-ON CLAMP (.360") WASHER (.254") SCREW (M6-1.00 X 20MM, SOC) BRONZE BUSHING (.375) SHOCK MOUNT CAM YOKE ROLLER BEARING FRICTION WASHER (.781") BOLT (1/4-NF X 1 1/4") BUSHING FLG LK SCREW (M8-1.25 X 35MM) SLEEVE (.250) CABLE CONNECTOR PROXIMITY SWITCH WASHER (.406") LOCKNUT (3/8-NC) LOCKNUT (#10-24) BOLT (3/8-NC X 2-1/4") INNER CONTROL ARM PROXIMITY SWITCH MOUNT SCREW (M4-0.70 X 30MM,BUT SOC) CLIP NUT (M6-1.00) NUT (M4, W/LK WSHR) WASHER (3/16") SCREW (M6-1.00 X 20MM,BUT SOC)

REMARKS

SEE FOOTNOTE 1

SEE FOOTNOTE 2

SEE FOOTNOTE 2

SEE FOOTNOTE 3; BEGINS W/ S/N: CMWRT95MK90000264

SEE FOOTNOTE 3; BEGINS W/ S/N: CMWRT95MK90000264 SEE FOOTNOTE 3; BEGINS W/ S/N: CMWRT95MK90000264

NOT SHOWN:

FOOTNOTES:

1. TO ATTACH BRACKET (REF #5) USE TWO INSIDE BOLTS LOCATED IN THE REAR OF THE FRONT PUMP ON THE SAME SIDE AS THE TRUNNION SHAFT. 2. APPLY LOCTITE BEFORE ASSEMBLY. 3. UNITS PRIOR TO S/N CMWRT95MK90000264 USE SENSOR 217-269 (1X), BRACKET 315-646 (1X), AND BOLTS 107-268 (2X).

NOTE:

06

ID0152909

154

155

156

NOTES:

ID0134963

157

HYDRAULICS

ID0135071

158

HYDRAULIC FILTER RT90 POWERSHIFT

38 TO ATTACHMENT VALVE RETURN

2 1

40 12

3 4

39

3

2

30 45

47 46

8

31 36

7 9

27

FROM REAR ATT. VALVE "PB"

1 17 18 41

14 1

3

19 3

43 TO HYD. TANK ( "Z" PORT)

15

10

31 34 35

1 16

37

FLOW

1

1 21

33

42 22

3 26

44

6

5 1 24

1 23 25 28

43 RETURN FOR RT90

29

20 32

( "A" PORT)

11 13 11

04

13

ID0153665

159

HYDRAULIC FILTER RT90 POWERSHIFT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

46.

47.

QTY

111-027 8 116-460 AR 105-003 5 153-210 1 194-283 117-764 1 155-230 1 149-642 1 149-641 1 149-854 1 105-827 2 153-862 1 154-324 4 316-850 1 153-984 3 153-957 1 153-956 1 154-188 1 116-460 AR 155-231 1 153-888 1 110-332 1 149-821 1 153-850 153-564 150-2680 116-460 AR 157-313 1 154-287 1 155-466 1 116-286 157-343 1 117-392 1 154-319 1 110-353 2 515-618 1 154-391 1 116-636 AR 158-033 159-809 154-362 1 154-327 1 515-515 1 107-336 2 106-442 2 117-611 1 149-908 1 110-333 2 117-691 1 117-214 1 320-253 1 105-152 1

DESCRIPTION

T-BOLT CLAMP (1.25" - 1.50") BULK HOSE (1", SOLD PER 1') FLG LOCKNUT (5/16-NC) HYDRAULIC MANIFOLD (5 PORT) RADIATOR/OIL COOLER ABRASION SLEEVE (1.59" X 90") S/O COUPLER (16S-16H45) HYD OIL FILTER HYD OIL FILTER ELEMENT HYD OIL FILTER ELMT (1-3/8 UNF) FLG LK BOLT (3/8-NC X 1-1/4") TEE (16S-08O-16H-08H) CAP (10OF) BRACKET BK RUN TEE (10O-10O-10OL) HOSE (10OFX45-44"-3000) HOSE (10OFX90-50"-3000) S/O COUPLER (16S-16H90) BULK HOSE (1", SOLD PER 1') S/O BR TEE (16S-16H-16H) CHECK VALVE ((16SF-16SF, 25 PSI) BOLT-ON CLAMP (1-5/8") HYD LINE (-10) S/O COUPLER (10S-08H90) TANDEM HYDRAULIC PUMP AUXILIARY PUMP BULK HOSE (1", SOLD PER 1') CONNECTOR (16OFX-16H90, XLG) CONNECTOR (16S-16O90) HOSE (10OFX90-74"-2750) BULK HOSE (1/2", SOLD PER 1") HOSE (10OFX90S-120"-3000) ABRASION SLEEVE (1.25" X 60") BK RUN TEE (10O) WORM CLAMP (3/4" TO 1-1/2") HOSE (10OFX90-95"-3000) CONNECTOR (08S-10O) BULK HOSE (3/4", SOLD PER 1') HYD CONTROL VALVE (3-SPOOL) HYD CONTROL VALVE (3-SPOOL) S/O COUPLER (10S-12H90) CAP (08OF) HOSE (10OFX45-50"-3000) FLG SCREW (M16-2.00 X 45mm, 10.9) FLG LOCKNUT (M16-2.00, PRV TRQ) ABRASION SLEEVE (1.00" X 22") RUN TEE (16S-16H-16H) BOLT-ON CLAMP (1") ABRASION SLEEVE (1.25" X 68") ABRASION SLEEVE (1.25" X 40") TAB NUT (1/4-NF)

REMARKS

USE 2 @ 75"

SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3

ENDS WITH S/N 5X0709.

BEGINS WITH S/N 5X0710.

USE 1 @ 22"

USE 1 @ 7.5"

USE 1 @ 30" ENDS WITH S/N________.

BEGINS WITH S/N_________.

SEE FOOTNOTE 4 SEE FOOTNOTE 4

FOOTNOTES:

1.

2.

3.

4.

149-642 (HYD. OIL FILTER) IS THE FILTER HEAD AND ELEMENT (149-854) IS A BREAK-IN FILTER. AFTER 50 HOURS CHANGE TO FILTER ELEMENT 149-641 WHICH IS THE REGULAR SERVICE FILTER. HOWEVER IF THE HYDRAULIC SYSTEM IS EVER EXPOSED TO CONTAMINATES THE BREAK-IN FILTER (149-854) SHOULD BE RE-INSTALLED FOR AT LEAST 50 HOURS OF OPERATION. REF. #46 (320-253) BOLTS TO T-BOLT CLAMP (111-027) AND SUPPORTS ELECTRICAL HARNESS CONNNECTOR.

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

04

ID0153665

160

POWERSHIFT MANIFOLD HYDRAULICS RT90M

DIFF. LOCK

11

12

1

P

4

14 REFER TO AUXILIARY HYDRAULICS

8

2 T

13

17

16 15 4

6

5 REFER TO REAR STEER HYDRAULICS

3 9

REFER TO AUX. HYD. TO REAR AXLE DIFF. LOCK

19

7 6 TO TANK ("Y" PORT)

9

18

REFER TO AUXILIARY HYDRAULICS

10 TO FRONT AXLE DIFF. LOCK

03

ID0139935

161

POWERSHIFT MANIFOLD HYDRAULICS RT90M

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

QTY

157-245 1 106-385 2 154-743 1 154-316 2 157-909 1 154-220 2 515-174 1 515-712 1 117-611 2 154-226 1 306-885 2 106-566 2 117-387 1 153-564 150-2680 154-344 1 154-411 1 154-296 1 153-917 157-331 -

DESCRIPTION

MANIFOLD (1-SPL) FLG LOCKNUT (M6-1.00) HOSE (04OFX90-23"-3000) RUN TEE (04S-04O-04O) HOSE (060FX-28"-3000) CONNECTOR (04O-06S) HOSE (04OFX90-74"-3000) HOSE (04OFX90L-68"-3000) ABRASION SLEEVE (1.00" X 22") CONNECTOR (04O-06S90) MOUNT PLATE SCREW (M6-1.00 X 70mm) ABRASION SLEEVE (1.00" X 42") TANDEM HYDRAULIC PUMP AUXILIARY PUMP UN RUN TEE (06OFX-06O-06O) CONNECTOR (04S-06O) CAP (04OF) TEE (08N-06O-06O) UN RUN TEE (06OFX-06O-08O)

REMARKS

SEE FOOTNOTE 1

SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. EARLY PRODUCTION MANIFOLDS HAVE A CAVITY PLUG WHERE THE RELIEF VALVE WAS LOCATED. 2. WITH "REAR STEER" OPTION TWO MOUNT PLATES (306-885) ARE REQUIRED, ONE ON EITHER SIDE OF FRAME. WITH "NO REAR STEER" ONLY ONE MOUNT PLATE (306-885) IS REQUIRED ON OUTSIDE OF FRAME.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

03

ID0139935

162

AUXILIARY HYDRAULICS RT90 POWERSHIFT 40

REFER TO DIFF. LOCK HYD.

10

13

6 36 8

9

38 39

12 1

10 35

37

3 10

34

4

10

38

43

TO HYD TANK ( "A" PORT)

41 11

33 7

32

44 42

TO HYD TANK ( "B" PORT)

5

27

24

TO HYD TANK ( "X" PORT)

23 45 25

DIFF. LOCK HYD.

15

31

TO HYD TANK ( "Y" PORT)

22

14

28

17

16 LS EF 18

2

T

26 21 19 20

CF 29 P 30

03

ID0153669

163

AUXILIARY HYDRAULICS RT90 POWERSHIFT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

QTY

116-286 AR 153-917 1 153-850 1 153-142 1 155-491 1 155-146 1 153-740 154-233 1 515-192 1 111-027 4 154-298 1 153-564 1 150-2680 116-460 AR 515-437 1 154-743 1 154-373 1 154-278 1 106-385 2 157-917 1 306-886 1 107-054 2 154-488 1 515-605 1 154-391 1 158-681 1 149-991 1 309-817 1 117-612 1 157-331 153-787 1 515-075 1 117-218 1 154-339 1 149-896 1 217-551 1 116-460 AR 154-327 117-611 1 110-026 2 153-862 149-642 154-315 1 514-446 157-987 214-854 154-256 1

DESCRIPTION

BULK HOSE (1/2", SOLD PER 1") TEE (08N-06O-06O) S/O COUPLER (10S-08H90) S/O COUPLER (20S-16H90) HOSE (10OFX90L-12"-3000) S/O COUPLER (12S-16H90) PICK UP TUBE CONNECTOR (08S-08O) HOSE (08OFX90L-54"-3000) T-BOLT CLAMP (1.25" - 1.50") CONNECTOR (10S-10O90) TANDEM HYDRAULIC PUMP AUXILIARY PUMP BULK HOSE (1", SOLD PER 1') HOSE (04OFX90-21"-3000) HOSE (04OFX90S-23"-3000) REDUCER (04O-06OF) CONNECTOR (04S-04O) FLG LOCKNUT (M6-1.00) PRIORITY VALVE SPACER SCREW (M6-1.00 X 90mm) UN RUN TEE (10OFX-10O-10O) HOSE (10OFX90S-20"-3000) CONNECTOR (08S-10O) RELIEF VALVE (AUXILIARY) CONNECTOR (08S-08S, XLG HEX) SPACER PLATE ABRASION SLEEVE (1.00" X 46") UN RUN TEE (06OFX-06O-08O) TEE (10O-10S-04O) HOSE (04OFX90S-82"-3000) ABRASION SLEEVE (1.00" X 52") CONNECTOR (04N-04O) STREET ELBOW (04NF-04NF90) PRESSURE GAUGE (3000 PSI) BULK HOSE (1", SOLD PER 1') CAP (08OF) ABRASION SLEEVE (1.00" X 22") WORM CLAMP (1/2" TO 1-1/4") TEE (16S-08O-16H-08H) HYD OIL FILTER HEAD UNION (10O-10OFX90) REDUCER (24S-20SF) S/O COUPLER (20S-16H90, 04NF) TEMPERATURE SWITCH UNION (08O-08OFX90)

REMARKS

USE 1 @ 48"

ENDS WITH S/N 5X0709.

USE 1 @ 42" ENDS WITH S/N 5X0709.

BEGINS WITH S/N 5X0710

USED ON INSIDE OF FRAME PLATE

PRE SET TO 2500 PSI USED ON OUTSIDE OF FRAME PLATE

USE 1 @ 25"

BEGINS WITH S/N 5X0710.

BEGINS WITH S/N 5X0710.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

03

ID0153669

164

AUX DRIVE LUBRICATION RT90

SEE FOOTNOTE 2

2

18

15 17

14 SEE FOOTNOTE 2

SEE FOOTNOTE 3

9

1 18

10 3 11 13

SEE FOOTNOTE 4

16 TO ENGINE BLOCK

10

TO OIL PAN

7

8

5 4 6

06

12

ID0041122

165

AUX DRIVE LUBRICATION RT90

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

QTY

154-226 1 154-726 1 515-041 1 154-261 1 153-971 1 154-248 1 154-272 1 153-757 1 106-645 2 107-044 155-130 1 154-255 1 153-564 150-2680 106-391 2 166-464 1 153-833 165-880 154-373 2

DESCRIPTION

CONNECTOR (04O-06S90) HOSE (04OFX90-15"-3000) HOSE (04OFX90-20"-3000) CONNECTOR (04O-08S) CONNECTOR (06N-08SF) REDUCER STEM (04O) REDUCER NUT (08OF) CONNECTOR (M22-1.50-08O) SCREW (M12-1.75 X 110mm, 10.9) BOLT (M12-1.75 X 45mm, SOC) PLUG (06S) UNION (04O-04OFX90) TANDEM HYDRAULIC PUMP AUXILIARY PUMP WASHER (M12) AUX DRIVE ADAPTER "B" PAD (9T) GASKET (ENGINE/PUMP AUX DRIVE) GASKET REDUCER (04O-06OF)

REMARKS

SEE FOOTNOTE 3 SEE FOOTNOTE 1

SEE FOOTNOTE 1

SEE FOOTNOTE'S 1, 2 & 4

NOT SHOWN:

FOOTNOTES:

1.

2.

3.

4.

REFER TO "AUXILIARY HYDRAULICS POWERSHIFT", THE TANDEM PUMP, HARDWARE AND GASKET ARE SHOWN ON THIS PAGE. COVER & ELBOW CONNECTOR COME WITH AUXILIARY DRIVE. SCREW (106-645) HOLDS AUXLIARY DRIVE TO ENGINE. SILICON SEALER IS REQUIRED TO BOTH SURFACES OF ITEM 16 FOR PROPER SEAL.

NOTE:

06

ID0041122

166

GROUND DRIVE MOTOR HYDRAULICS

11

12

1

2

13

10

10 9 14 9

9 14

3

8

4 7

6

5

04

ID0115814

167

GROUND DRIVE MOTOR HYDRAULICS REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

1 2 2 2 2 1 2 2 2 2 1 1 1 2

158-046 106-632 154-355 154-296 157-263 115-902 154-233 154-716 154-248 154-266 154-256 154-279 154-322 154-272

DESCRIPTION

REMARKS

HYD. MOTOR (GROUND) FLG LK SCREW (M12-1.75 X 35mm, SER) BK CONNECTOR (04O-04O90BK) CAP (04OF) HOSE (04OFX-102"-5000) ABRASION SLEEVE (1.59" X 100") CONNECTOR (08S-08O) HOSE (08OFX90-48"-3000) REDUCER STEM (04O) UNION RUN TEE (08OFX-08O-08O) UNION (08O-08OFX90) CONNECTOR (08O-10S) CONNECTOR (08O-10S90) REDUCER NUT (08OF)

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0115814

168

BACKFILL BLADE HYDRAULICS

27

1 34

TILT LIFT

LIFT

24

1

28

SWING

26

4

6

33

TILT

7 SWING

4 41

5 8

23

7

16

17

SW

33 15 6

39

21

2

22 25

36

14

37

40

9 32

ING

35 19

39 40

3

20

13 NG

38

36

10

8

31

13 14

T L IF

SW I

3

SEE NOTE

11

18

30

T T IL

29

14

12

LIFT

SWING

(24)

TILT

FOOTNOTE 2 REF. 27 FITS HERE REF. 7 FITS HERE

REF. 7 FITS HERE

REF. 6 FITS HERE REF. 6 FITS HERE

13

REF. 28 FITS HERE

ID0115813

169

BACKFILL BLADE HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

QTY

153-074 2 153-968 1 515-310 2 515-137 2 106-327 2 154-261 2 154-374 2 151-057 2 154-293 1 154-278 1 151-070 1 151-202 1 154-342 2 154-252 3 307-416 1 154-229 2 154-355 2 154-921 1 515-586 1 515-221 1 106-386 2 154-316 1 153-967 1 158-033 159-809 117-691 1 115-920 1 514-294 1 154-222 1 110-866 2 110-958 2 105-818 4 110-332 1 105-003 2 110-333 1 117-328 1 117-672 2 117-409 1 153-973 1 154-344 2 154-326 2 116-259 AR

DESCRIPTION

REMARKS

HOSE (06OFX90-88"-3000) HOSE (04OFX90S-82"-5000) HOSE (04OFX45-22"-5000) HOSE (04OFX90-90"-3000) SCREW (M8-1.25 X 30mm) CONNECTOR (04O-08S) CONNECTOR (04O-08S, ORF) CYL (2.0" X 1.25" X 8.0") BRANCH TEE (04S-04O-04O) CONNECTOR (04S-04O) CYL (3" X 1.75" X 8") CYL (2" X 1" X 3.38") CONNECTOR (06S-06O90) CONNECTOR (04S-04O90) BK BRACKET BK CONNECTOR (06O-06O90BK) BK CONNECTOR (04O-04O90BK) HOSE (04OFX-54"-3000-AR) HOSE (06OFX90-21"-3000) HOSE (06OFX90S-28"-3000) FLG LOCKNUT (M8-1.25) RUN TEE (04S-04O-04O) HOSE (04OFX90S-90"-5000) HYD. CONTROL VALVE (3-SPOOL) HYD. CONTROL VALVE (3-SPOOL) ABRASION SLEEVE (1.25" X 68") ABRASION SLEEVE (2.38" X 70") CONNECTOR (08S-06O, ORF) CONNECTOR (06O-08S) CLAMP SET (1/2") BACKUP PLATE BOLT (1/4-NC X 1-1/2") BOLT-ON CLAMP (1-5/8") FLG LOCKNUT (5/16-NC) BOLT-ON CLAMP (1") ABRASION SLEEVE (1.00" X 18") ABRASION SLEEVE (1.00" X 20") ABRASION SLEEVE (1.00" X 28") HOSE (04OFX45-54"-3000-AR) UN RUN TEE (06OFX-06O-06O) CAP (06OF) BULK EDGE (1/2", SOLD PER FT)

LIFT SWING SWING TILT

SEE FOOTNOTE 1

SEE FOOTNOTE 1 SEE FOOTNOTE 1

TILT LIFT LIFT

SWING ENDS WITH S/N 5Y0446. OBSOLETE BEGINS WITH S/N 5Y0447, USE FLOAT KIT 500-2020

SEE FOOTNOTE 2

SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

TILT

USE 1 @ 20" & SEE FOOTNOTE 4

FOOTNOTES:

1. REFER TO PARTS PAGE "BACKFILL BLADE ASSEMBLY" FOR CYLINDER INSTALLATION HARDWARE. 2. CLAMP SET (110-866) BOLTS ONTO WELD PLATE ON BFB LIFT ARM. 3. #110-333, 105-003 & 110-332 ATTACH TO STUD BOLTS ON FRAME PLATES. 4. USE EDGING ON FRAME WHERE HOSE'S PASS THRU.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS. 154-335 ADD ON ASSEMLBY LINE. WILL BE REMOVED TO ADD ATTACHMENT.

13

ID0115813

170

BACKFILL BLADE VALVE RT95

TO REAR STEER / FRAME TILT VALVE REFER TO REAR STEER HYD.

9 8

2 1

2 3 6 7 5 4 12 11

10 SEE FOOTNOTE 1

NOTE: FOR HYDROSTAT UNITS REFER TO AUX. HYD.- HYDROSTAT & FOR POWER SHIFT UNITS REFER TO AUX. HYD.- POWER SHIFT

02

ID0153415

171

BACKFILL BLADE VALVE RT95

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

149-851 154-298 149-849 154-301 157-322 105-292 106-386 158-033 159-809 153-907 154-362 116-636 157-917

QTY

DESCRIPTION

1 2 1 1 1 3 3 1 1 1 -

HYD LINE (-10) CONNECTOR (10S-10O90) HYD LINE (-10) CONNECTOR (10S-10O) HYD LINE (-10) SCREW (M8-1.25 X 75mm) FLG LOCKNUT (M8-1.25) HYD. CONTROL VALVE (3-SPOOL) HYD. CONTROL VALVE (3-SPOOL) HOSE (10OFX45-16"-3000) S/O COUPLER (10S-12H90) BULK HOSE (3/4", SOLD PER 1') PRIORITY VALVE

REMARKS

ENDS WITH S/N________, BEGINS WITH S/N_______.

SEE FOOTNOTE 1

USE 1 @ 25"

FOOTNOTES

1.

FOR BFB VALVE RETURN HOSE'S REFER TO PAGE "PUMP DRIVE HYDRAULICS" FOR HYDROSTATICS OR PAGE "GROUND DRIVE MOTOR HYDRAULICS" FOR POWERSHIFTS.

NOTE

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

02

ID0153415

172

POWER STEERING VALVE HYDRAULIC

3

TANK

LT L.S.

PRESS

6 4 RETURN MANIFOLD FOR HYDROSTATS

4

REFER TO HYD. FILTER PAGE

5

2

RT

LT

RT

7 1 2

11 1 7

POWER SHIFT UNITS SEE FOOTNOTE 1

12

HYDROSTATIC SEE FOOTNOTE 1

15

9

14

LT

10 8

6 RT RETURN MANIFOLD FOR POWER SHIFT REFER TO GRD. DRV. MOTOR HYD. PAGE

8 TO FRONT STEERING AXLE (STEERING CYL.)

16 13

06

ID0057080

173

POWER STEERING VALVE HYDRAULIC REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

117-214 515-222 149-358 149-371 190-913 154-227 154-276 154-252 116-804 152-146 154-695 153-315 117-396 117-387 157-917 307-535 153-210 154-222

QTY

2 1 1 1 1 2 2 2 2 2 1 1 1 1 1

DESCRIPTION

ABRASION SLEEVE (1.25" X 40") HOSE (06OFX45-46"-3000) HOSE (06OFX45-55"-3000) POWER STEERING VALVE SEAL REPAIR KIT CONNECTOR (06O-08S90) CONNECTOR (04O-08S90) CONNECTOR (04S-04O90) HOSE (04OFX90-69"-3000) CONNECTOR (04O-08S) SHORT HOSE (04OFX-38"-3000) HOSE (06OFX90S-36"-3000) ABRASION SLEEVE (1.25" X 28") ABRASION SLEEVE (1.00" X 42") PRIORITY VALVE RETURN MANIFOLD HYDRAULIC MANIFOLD (5 PORT) CONNECTOR (060-08S)

REMARKS

HYDROSTAT UNITS ONLY & SEE FOOTNOTE 1 POWER SHIFT UNITS ONLY & SEE FOOTNOTE 1

FOOTNOTES

1.

AS INDICATED BY THE GRAPHICS, "RETURN TO TANK" ON HYDROSTATIC UNITS RETURNS TO RETURN MANIFOLD ON SIDE OF LEFT FRAME PLATE. "RETURN TO TANK" ON POWER SHIFT UNITS RETURNS TO RETURN MANIFOLD ON CROSSMEMBER OF FRAME.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

06

ID0057080

174

REAR STEER HYDRAULICS

4

13 CONNECTS TO REAR SPOOL

2 18 5

7

T OU

8

ET SID

OP T OU

OT EB SID

M TO

3

TO REAR AXLE STEER CYL. RIGHT SIDE

13 16 TO REAR AXLE

10 15

STEER CYL. LEFT SIDE

6 19 9

1

11 8 10

12 17 SEE FOOTNOTE 2

FROM "PB" ON BFB REFER TO BACKFILL BLADE VALVE

21

14

12

REFER TO (REF #20) MOTOR SHIFT/DIFF LOCK HYDRAULICS

20

ID0064417

175

REAR STEER HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

154-222 154-934 152-146 117-608 153-785 153-786 159-505 149-616 154-391 106-379 106-354 106-385 106-632 307-074 153-320 157-334 154-298 117-328 515-462 154-344 154-276 153-907 149-851 515-129

QTY

1 1 1 1 1 1 1 4 3 4 3 1 1 2 1 1 1 1 -

DESCRIPTION

CONNECTOR (06O-08S) HOSE (04OFX45-18"-3000) CONNECTOR (04O-08S) SHORT ABRASION SLEEVE (1.00" X 15") HYDRAULIC VALVE (SGL SPOOL) HYDRAULIC VALVE (2-SPOOL) SOLENOID TUBE CAP NUT CONNECTOR (08S-10O) FLG LK SCREW (M6-1.00 X 20mm) FLANGE NUT (M12-1.75) FLG LOCKNUT (M6-1.00) FLG LK SCREW (M12-1.75 X 35mm, SER) BRACKET HOSE (06OFX90L-17"-3000) CONNECTOR (04O-06S90, ORF) CONNECTOR (10S-10O90) ABRASION SLEEVE (1.00" X 18") HOSE (04OFX90-22"-3000 AR) UN RUN TEE (06OFX-06O-06O) CONNECTOR (04O-08S90) HOSE (10OFX45-16"-3000) HYD. LINE (-10) HOSE (10OFX90-30"-3000)

REMARKS

SEE FOOTNOTE 1, SEAL KIT 500-2201. SEE NOT SHOWN FOR S.P.

REFER TO "MOTOR SHIFT/DIFF LOCK HYD" FOR DESTINATION

SEE FOOTNOTE 2

NOT SHOWN:

500-2372 AR

SOLENOID TUBE, UNLOADING VALVE

FOOTNOTES:

1.

2.

153-786 (2 SPOOL VALVE) IS USED WHEN FRAME TILT & REAR STEER OPTIONS ARE BOTH USED. REFERENCE #3 FROM "PUMP DRIVE HYD" WILL ATTACH HERE UNTIL A REAR ATTACHMENT IS ATTACHED ON TRACTOR.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

12

ID0064417

176

FRAME TILT HYDRAULICS

28 29 30 8 1 14

13 11 10

26 1 16

15 6

14

8

17 22

3 2

13

1

12

IDE INS

7

P TO

M TO OT B E ID INS

11 10 19

9

5

3 20

1

23

27 21

SUPPLY FROM BFB "PB" (BACKFILL BLADE VALVE)

18 16 4

20

19

25

32 15

24

33

12 9

31

26

REFER TO (REF #20) (MOTOR SHIFT/DIFF LOCK HYDRAULICS)

12

ID0091552

177

FRAME TILT HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

154-252 154-385 154-265 154-963 154-702 515-229 515-019 151-202 106-164 106-469 181-982 181-981 183-765 125-771 183-767 125-770 153-786 153-785 217-948 149-616 499-445 159-505 499-444 214-909 157-262 307-074 106-354 106-632 106-385 106-379 154-391 153-320 154-222 115-811 154-298 515-129 154-464 157-343 154-344 153-907 149-851

QTY

4 2 2 1 1 1 1 2 2 2 2 2 2 2 2 2 1 1

1 3 3 4 4 1 1 1 2 1 1 1 -

DESCRIPTION

CONNECTOR (04S-04O90) CONNECTOR (04O-06S, ORF) UN RUN TEE (04OFX-04O-04O) HOSE (04OFX45-24"-3000) HOSE (04OFX-30"-3000) HOSE (04OFX-34"-3000) HOSE (04OFX45-34"-3000) CYL (2" X 1" X 3.38") FLG LK SCREW (M10-1.50 X 30mm) FLG SCREW (M12-1.75 X 30mm) TAPERED INSERT (1.25") TAPERED INSERT (1") TAPERED PIN (31.7mm X 110mm) COMPOSITION BUSHING (1.25") TAPERED PIN (25.4mm X 60mm) COMPOSITION BUSHING (1") HYDRAULIC VALVE (2-SPOOL) HYDRAULIC VALVE (SGL SPOOL) COIL, 12VDC CAP NUT COIL RETAINING NUT SOLENOID TUBE SOLENOID TUBE ASSM'Y SOLENOID COIL DUAL P.O. CHECK BRACKET FLG NUT (M12-1.75) FLG LK SCREW (M12-1.75 X 35mm, SER) FLG LK NUT (M6-1.00) FLG LK SCREW (M6-1.00 X 20mm) CONNECTOR (08S-10O) HOSE (06OFX90L-17"-3000) CONNECTOR (06O-08S) ABRASION SLEEVE (1.59" X 20") CONNECTOR (10S-10O90) HOSE (10OFX90-30"-3000) CONNECTOR (10O-10O) HOSE (10OFX90S-120"-3000) UN RUN TEE (06OFX-06O-06O) HOSE (10OFX45-16"-3000) HYD LINE (-10)

REMARKS

SEE FTNT 1, SEAL KIT 500-2201, SEE NOT SHOWN FOR S.P. SEE FOOTNOTE 1,

OBSOLETE OBSOLETE

REFER TO REF #3 ON PUMP DRIVE HYDRAULICS

NOT SHOWN:

500-2372 AR

SOLENOID TUBE, UNLOADING VALVE

FOOTNOTES:

1.

153-786 (2-SPOOL VALVE) IS USED WHEN FRAME TILT & REAR STEER OPTIONS ARE BOTH USED. PARTS PAGE FOR REAR STEER OPTION.

SEE REAR STEER

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

12

ID0091552

178

179

180

HYDRAULIC CONTROL VALVE 3 SPOOL UPPER VALVE

7

2

8

1 11

13 12

10

5

9

4

3

6

07

ID0114909

181

HYDRAULIC CONTROL VALVE 3 SPOOL UPPER VALVE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

158-033 159-809 500-933 599-278 500-935 191-149 500-934 191-153 191-157 191-151 155-179 154-384 599-279 500-928

QTY

1 1 3 1 1 1 2 3 1 6 1 1 2 2

DESCRIPTION

REMARKS

HYD CONTROL VALVE (3-SPOOL) HYD CONTROL VALVE (3-SPOOL) LOAD CHECK PLUG KIT NR PLUG KIT FLOAT POSITIONER KIT PLUG SEAL KIT SPOOL POSITIONER KIT SPOOL BOOT KIT POWER BEYOND SLEEVE SPOOL LIP SEAL KIT PLUG (10S, SOC) PLUG (06S) WORK PORT NR PLUG KIT SEAL REPAIR KIT

ENDS WITH S/N_______. OBSOLETE BEGINS WITH S/N_________. USE FLOAT KIT 500-2020

NOT SHOWN:

FOOTNOTES:

1. EARLY PRODUCTION VALVES HAVE A MACHINED WORK PORT WITH A PLUG INSTALLED, FUTURE PRODUCTION VALVES WILL NOT HAVE A MACHINED WORK PORT.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

07

ID0114909

182

HYDRAULIC CYLINDER 2.0" X 1.00" X 3.38"

2

1 3 4

5

6

7

D

806-388

183

HYDRAULIC CYLINDER 2.0" X 1.00" X 3.38" REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

151-202 190-165 150-778 150-700 106-096 150-775 150-772 150-698

NOT SHOWN: 259-100 259-188 259-239 259-241

QTY

DESCRIPTION

REMARKS

INCLUDES REF NO.'S 1 THRU 7

1 1 1 1 1 1 1

HYD CYL (2" X 1" X 3.38") SEAL REPAIR KIT (2" X 1") LOCK RING (2") CYLINDER BARREL FLG BOLT (1/2-NC X 1-3/4",GD8) CYLINDER PISTON (2" X 1") CYLINDER HEAD (2" X 1") CYLINDER ROD

SEE FOOTNOTE 1

U-SEAL INSTALLER (1"-1.499") CYL HEAD SPANNER - TWO PIN WIPER SEAL INSTALLER (2") PISTON INSTALLER (2")

FOOTNOTES

1. APPLY LOCTITE 271 OR 277. TORQUE TO 90-100 FT-LBS (120-135 N.M.)

NOTE:

D

806-388

184

185

186

HYDRAULIC CYLINDER (3" X 1.75" X 8")

2

1 3 4 5 6

7

8

07

ID0125475

187

HYDRAULIC CYLINDER 3" X 1.75" X 8" REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

151-070 190-172 150-911 152-014 106-122 105-363 150-765 150-763 150-436

QTY

1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CYL (3.0" X 1.75" X 8.0") SEAL REPAIR KIT (3.0" X 1.75") LOCK RING (3") CYLINDER BARREL (3") BOLT (7/8-NC X 2-1/4", GD8) WASHER (7/8") CYLINDER PISTON (3" X 1.75") CYLINDER HEAD (3" X 1.75") CYLINDER ROD (1.75")

INCL REF NO.'S 1 THRU 7 INCL REF NO.'S 4 THRU 5

SEE FOOTNOTE 1 INCL MOLDED-ON WEAR RING

NOT SHOWN:

259-040 259-238 259-065 259-066 259-188

U-SEAL INSTALLER (1.5" - UP) WIPER INSTALLER (1.75") PISTON SEAL INSTALLER (3") PISTON INSTALLER (3") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. CLEAN & DRY THREADS.

APPLY RED LOCTITE (RC 271 OR RC 272).

TORQUE TO 410-460 FT-LBS (560-625 N.M.)

NOTE:

07

ID0125475

188

NOTES:

ID0134963

189

ELECTRICAL

SEE TECHNICAL SUPPLEMENT FOR FURTHER ELECTRICAL INFORMATION

ID0134878

190

NOTES:

ID0134963

191

MISCELLANEOUS

ID0135063

192

SAE Bolt and Nut Torque Value Chart Grade 5: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

12

16

8

11

20

27

5/16

25

34

15

20

45

60

3/8

40

54

25

34

75

100

7/16

65

90

40

55

125

170

1/2

100

135

60

80

190

260

9/16

150

200

90

125

270

370

5/8

200

270

120

165

370

500

3/4

350

475

210

285

650

880

7/8

560

760

340

460

1250

1425

1

840

1140

500

680

1580

2145

1-1/8

1030

1400

320

840

1950

3645

1-1/4

1460

1980

880

1195

2760

3475

Grade 8: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

14

19

10

14

24

33

5/16

30

40

18

25

50

70

3/8

55

73

35

50

90

125

7/16

85

115

50

70

140

190

1/2

130

175

80

110

220

300

9/16

190

260

110

150

310

420

5/8

260

355

160

245

430

585

3/4

450

610

270

365

750

1015

7/8

730

990

440

600

1210

1640

1

1090

1480

650

880

1320

2465

1-1/8

1550

2100

930

1260

2580

3500

1-1/4

2180

2955

1310

1780

3640

4935

*drilled and tapped

193

Metric Bolt and Cap Screw Torque Values Size

Class 4.8

Class 8.8 and 9.8

Class 10.9

Class 12.9

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

M6

4.8

3.5

6

4.5

9

6.5

11

8.5

13

9.5

17

12

15

11.5

19

14.5

M8

12

8.5

15

11

22

16

28

20

32

24

40

30

37

28

47

35

M10

23

17

29

21

43

32

55

40

63

47

80

60

75

55

95

70

M12

40

29

50

37

75

55

95

70

110

80

140

105

130

95

165

120

M14

63

47

80

60

120

88

150

110

175

130

225

165

205

150

260

190

M16

100

73

125

92

190

140

240

175

275

200

350

225

320

240

400

300

M18

135

100

175

125

260

195

330

250

375

275

475

350

440

325

560

410

M20

190

140

240

180

375

275

475

350

530

400

675

500

625

460

800

580

M22

260

190

330

250

510

375

650

475

725

540

925

675

850

625

1075

800

M24

330

250

425

310

650

475

825

600

925

675

1150

850

1075

800

1350

1000

M27

490

360

625

450

950

700

1200

875

1350

1000

1700

1250

1600

1150

2000

1500

M30

675

490

850

625

1600

950

1650

1200

1850

1350

2300

1700

2150

1600

2700

2000

M33

900

675

1150

850

1750

1300

2200

1650

2500

1850

3150

2350

2900

2150

3700

2750

M36

1150

850

1450

1075

2250

1650

2850

2100

3200

2350

4050

3000

3750

2750

4750

3500

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, these should only be tightened to strength of original.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Tighten plastic insert or crimped type steel locknuts to approximately 50% of dry torque indicated on chart.

Apply torque to the nut - not the bolt head. Tighten toothed or serrated type locknuts to full torque value.

LUBRICATED means coated with lubricant. DRY means plain or zinc plated without any type of lubricant.

194

Hydraulic Cylinder Bolt Torque Chart Bolt Size (inch)

Bolt Part No.

Cylinder Repair Kit Part No.

Torque (ft•lb)

Torque (N•m)

1/2

106-096

190-165

90-100

120-135

5/8

106-097

190-166 & 190-169

180-200

245-270

3/4

106-098

190-167 & 190-170

290-325

395-440

7/8

106-122

190-172 & 190-174

410-640

550-625

1

106-145

190-175 & 190-189

630-700

855-950

1-1/8

106-146

190-177

770-850

1045-1170

As a general rule: •

1/2-inch bolts are used in cylinders with 1-inch rods

•

5/8-inch bolts are used in cylinders with 1 1/4-inch rods

•

3/4-inch bolts are used in cylinders with 1 1/2-inch rods

•

7/8-inch bolts are used in cylinders with 1 3/4-inch rods

•

1-inch bolts are used in cylinders with 2-inch rods (one with 1 3/4-inch)

•

1-1/8-inch bolts are used in cylinders with 2-1/4-inch rods

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and torque to value shown on chart.

SAE & ORS Hydraulic Fitting Replacement O-Ring Chart Fraction Size

Dash Size

SAE (Port Seal O-Ring)

ORS (Face Seal O-Ring)

Thread Size

O-Ring P/N

Thread Size

O-Ring P/N

1/16

1

NA

NA

NA

NA

1/8

2

5/16 - 24

NA

NA

NA

3/16

3

3/8 - 24

NA

NA

NA

1/4

4

7/16 - 20

155-760

9/16 - 18

157-037

5/16

5

1/2 - 20

NA

NA

NA

3/8

6

9/16 - 18

155-705

11/16 - 16

157-038

1/2

8

3/4 -16

155-706

13/16 - 16

157-039

5/8

10

7/8 - 14

155-707

1 - 14

157-040

3/4

12

1-1/16 - 12

155-709

1-3/16 - 12

157-017

7/8

14

1-3/16 - 12

155-747

NA

NA

1

16

1-5/16 - 12

155-748

1-7/16 - 12

155-714

1-1/4

20

1-5/8 - 12

155-702

1-11/16 - 12

NA

1-1/2

24

1-7/8 - 12

157-001

2 -12

NA

2

32

2-1/2 - 12

NA

NA

NA

2-1/2

40

3 - 12

NA

NA

NA

3

48

3-1/2 - 12

NA

NA

NA

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current CMW part numbered o-ring, or dash size does not occur in current CMW applications SAE = straight thread fitting that seals by sandwiching a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORS = o-ring face seal; a type of fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface

195

196

RT95M Related Publications Component

Ass’y

P/N

Model: RT95 .................. Parts Manual ......................................................... ............ 053-122 RT95 .................. Operators Manual .................................................. ............ 054-127 RT95 ................... Repair Guide (Service Manual) .............................. ................ N/A RT95 ................... Technical Supplement ........................................... ........... 053-1029 RT95 .................. Special Tools Guide .............................................. ............ 052-901 Engine: John Deere ......... Operators Manual – 4045TF270 ..................... 194-511 .... 054-087

Filters Engine: Air Filter Parts Ass’y ......................................................................................... 194-121 Element (primary) .............................................................................. 194-147 Element (secondary) .......................................................................... 194-148 Oil Filter Element (spin-on) - John Deere .......................................................... 194-478 Fuel Strainer (04H) Tank .................................................................................. 156-268 Primary Filter Sediment Bowl ............................................................................ 194-493 Fuel Filter Element-John Deer(Primary) ………………………………………… 194-588 Fuel Filter Element-John Deer(Secondary) …………………………………… 159-255 Transmission: Oil Filter Element (spin-on) ................................................................................ 159-509 Hydraulic: Oil Filter Element (1-1/2-UNF, spin-on, Replacement) ...................................... 149-641

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) .............................. 190-051 O-ring Repair Kit - Field Service (46 different O-rings) ..................................... 190-052

VER.02

ID0089054

197

Parts Manual Change Request (Please print clearly)

Date: _______________________

Dealer No. (required): _____________________________

Your Name: _____________________________ Phone: _________________

Position: _____________________________

Fax: _________________

E-mail: __________________

Publication Information: Parts Manual No.: _____-_____

Model: __________

Illustration Part No.: Manual Page No.: 1. _____-_____ .......................................................... 1. __________ 2. _____-_____ .......................................................... 2. __________ 3. _____-_____ .......................................................... 3. __________ Nature of Change Request:

 Text

 Graphics

 Missing Information

Describe change requested (if possible, include copy of publication page with changes marked.): ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ Please fax completed form to Parts Manual Department (580) 572-3525 Thank you for taking the time to submit this request. We will contact you if further information is needed to process your request.

ID0135001

198

199

ID0040564

200

ID0135281