Ditch Witch RT75 Tractor Hydrostatic Parts Manual 053-121 PDF

RT75H

Parts Manual

Issue 8

053-121

1

RT75 Hydrostatic ISSUE NO. 08PL-09/17 For Replacement Copy Order P/N 053-121 This product and its use may be covered by one or more patents at http://patents.charlesmachine.works.

This manual contains information concerning the following models: RT75H Tractor

Copyright 2004, 2005, 2006, 2011, 2014, 2017 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Modularmatic, Jet Trac, Roto Witch, Subsite, Fluid Miser, Perma-Soil, Power Pipe, Super Witch, Super Witch II, Pierce Arrow, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication. However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration reference numbers. ♦ Have equipment model and serial number on hand to help ensure you get the right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 04

ID0128552

4

WARRANTY _________________________ DW WARRANTY Policy August, 2016

POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse, abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part

by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 05

ID0134872

5

CONTENTS______________________ Decals Decal Location .......................................... 8

Engine Components CCV Valve ............................................... 18 Cold Start Kit ........................................... 28 Engine, John Deere Service..................... 16 Engine, John Deere ................................. 14 Exhaust Stack Guard ............................... 24 Muffler & Air Filter .................................... 22 Radiator/Cooler ........................................ 26 Rear Engine Support................................ 20

Power Train Axle – Differential Lock Steerable/Rigid ............ 48 Axle – Differential Steerable/Rigid ................... 52 Axle – Double Joint Steerable ........................ 58 Axle – Gear/Pinion Steerable/Rigid .................. 46 Axle – Housing Rigid .................................... 40 Axle – Housing Steerable .............................. 50 Axle – Potentiometer Steerable........... 62, 64, 66 Axle – Reduction Gear Steerable .................... 56 Axle – Reduction Gears Rigid ......................... 42 Axle – Steering Cylinder Steerable .................. 60 Axle – Wheel Hub Rigid ................................ 44 Axle – Wheel Hub Steerable .......................... 54 Brake Calipers ......................................... 70 Differentials .............................................. 38 Ground Drive Transmission Mount ........... 32 Hydrostatic Drive Line .............................. 68 Manual Shift Transmission ....................... 34 Park Brake ............................................... 74 Service Brake System ........................... 72 Tire & Wheel – 31 x 15.5-15 E10TT .............. 76 Tire & Wheel – 35 x 19-16.1 ........................ 78

Hydraulic Reservoir ................................ 110 Seat Platform ........................................ 112 Seat Swivel and Base ........................... 114 Sound Blankets ..................................... 130 Tilt Steering ............................................. 98 Trench Depth Meter Module ..................... 90 Trench Depth Meter/Odometer Mt ............ 92

Control Components Attachment Control Handle .................... 144 BFB Blade Controls ................................ 134 Cruise Control ........................................ 146 Ground Speed Direction Foot Cntrl ....... 138 Ground Speed Direction Hand Cntrl ...... 136 Hand Throttle ......................................... 142 Hydrostatic Shift ..................................... 140 Rear Steer Control Kit ............................ 148

Hydraulics Auxiliary Hydraulics .............................. 166 Backfill Blade Hydraulics ....................... 152 Backfill Blade Valve ............................... 154 Control Valve – 3 Spool Upper ................... 180 Cylinder – 2” x 1.25” x 8” ............................. 184 Cylinder – 2” x 1” x 3.38” ............................. 182 Cylinder – 3” x 1.75” x 8” ............................. 186 Filter Guard ............................................ 172 Filter ....................................................... 170 Hydrostatic Pump Attachment ................ 168 Motor Shift/ Diff. Lock ............................. 162 No Frame Tilt/No Rear Str Option ......... 178 Power Steering Valve ............................. 174 Pump Drive Hydraulics ................... 156, 158 Pump Hydrostatic Assembly .................. 160 Rear Steer.............................................. 176 Remote Crowd ....................................... 164

Frame Components 4-Post ROPS ........................................ 118 Backfill Blade Assembly ........................... 82 Backfill Blade Cylinder Guard................... 84 Battery Hold Down ................................. 116 Cab Heater Assembly ............................ 124 Cab Kit .................................................. 122 Canopy & Light Kit ................................. 128 Counterweight, Front................................ 94 Counterweight/Grille .......................... 86, 88 Engine Enclosure ..................................... 96 Fenders and Covers .............................. 104 Fuel Tank ............................................. ..106 Gauge Cluster ........................................ 102

Electrical *See Technical Supplement For Further Electrical Information.................. #053-127

ID0134941

6

CONTENTS______________________ Miscellaneous Bolt/Nut Torque Chart ........................... 192 Filters .................................................... 196 Optional Kits ......................................... 196 Parts Manual Change Request ............. 197 Related Publications .............................. 196 Replacement O-Ring Chart .................... 195 Warranty Registration ........................... 200

ID0134941

7

DECALS

ID0135069

8

DECAL LOCATION RT75

41 26 21 40

5

4 28

10 13

39

14

1 38

35 32

29 25

17 15

19

36

07

ID0093469

9

DECAL LOCATION RT75 9

34

11

12 3 19

17

6 18

31

37 19 27

29 17 2

07

10

ID0093469

10

DECAL LOCATION RT75

33 23

4.50”

20

7.00”

2.25”

2.00”

42 8 7

.75”

.75”

1.00”

1.00”

24 30

29

6.00”

2.00”

BATTERY DOOR 2.00”

29

1.00” .50”

22 6.00” 2.00”

1.00”

16

07

ID0093469

11

DECAL LOCATION RT75 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

275-918 275-919 273-092 700-151 273-263 273-213 273-094 273-095 273-100 275-400 273-102 273-262 273-103 273-104 270-1268 273-108 273-109 273-488 273-489 273-246 273-455 274-291 274-318 274-375 274-442 274-724 275-361 275-033 273-475 275-070 700-064 275-120 275-148 273-452 275-185 275-303 275-497 270-5127 273-197 273-239 270-1023 273-267 700-062 700-063 273-292 273-458 273-449 273-496

QTY

DESCRIPTION

1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 4 1 4 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1

DECAL KIT - RT75H DECAL KIT - RT75M GROUND DRIVE CONTROL GROUND DRIVE CONTROL 1 AND 2 SHIFT MOBILE-WORK AXLE LOCK/AUXILIARY STEER/TILT/THROTTLE BFB FUNCTIONS NOTICE OIL LEVEL REEL CARRIER/COLD START REEL CARRIER/COLD START HORN/ROTOWITCH/IGNITION FUSE PANEL DITCH WITCH LOGOTYPE DITCH WITCH-ID TEST PORTS RT75 MODEL ID STRIPE LEFT RT75 MODEL ID STRIPE RIGHT RIGID LOGO PLACARD LUBRICATION CHART SOUND POWER TIE DOWN LOCATION MASTER DISCONNECT SWITCH LIFT LOCATION WARNING ONE CALL NOTIFICATION PARKING BRAKE NOTICE ELECTRICAL SYSTEM WARNING READ MANUAL WARNING RUNAWAY POWER BEYOND/RETURN/PRESSURE RESERVOIR (THF) FUEL TANK (DIESEL) NOTICE COOLANT WARNING SINGLE OPERATOR WARNING ROLLOVER OIL DRAIN-ID BATTERY OVERHEAD CONSOLE RELAY PANEL NOTICE HYDRAULIC OIL LEVEL DITCH WITCH BATTERY DIESEL FUEL CAP HYDRAULIC OIL CAP FRAME NOSE CASTING WEIGHT EDT CRUISE CONTROL OVERLAY NOTICE ENGINE SPEED

REMARKS

SEE FOOTNOTE 3 RT75H RT75M

RT75H RT75M

OLD STYLE - SEE FOOTNOTE 1 RT75H

SEE FOOTNOTE 1

SEE FOOTNOTE 2

SEE FOOTNOTE 1 RT75H; SEE FOOTNOTE 3 RT75M

FOOTNOTES

1. NOT PART OF KIT. 2. 273-197 NOT PART OF KIT. PROVIDED IN CANOPY AND LIGHT KIT 600-382 3. NOT PART OF KIT. PROVIDED IN CRUISE CONTROL KIT 604-979.

07

ID0093469

12

NOTES:

ID0134963

13

ENGINE COMPONENTS

ID0134845

14

JOHN DEERE ENGINE

19

33 35 24

31 40

18

45 21

34 39

12 28

16 41 44

43

24

42 1 9 8

7 38 26 27

30

46

22

32

25 11

24

19

6 4

29

23

5 17 14

10

4

13

24

24 36

06

2

20

3

15

37

ID0024301

15

JOHN DEERE ENGINE REF PART NO. NUMBER

QTY

DESCRIPTION

1. 194-512 1 ENGINE - DEERE DIESEL 2. 154-324 1 CAP (10OF) 3. 149-624 1 BK S/O COUPLER (10O-10H) 4. 110-353 2 WORM CLAMP (3/4" TO 1-1/2") 5. 116-044 AR BULK HOSE (5/8", SOLD PER 1") 6. 153-160 1 S/O COUPER (18M-10H45) 7. 215-1203 1 SENDER, OIL PRESSURE (0-80PSI) SD 8. 217-565 1 TEMPERATURE SENDER 100 - 280 F 9. 217-247 1 WATER TEMPERATURE ADAPTER 10. 107-009 1 FLG LK SCREW (M12-1.75 X 25MM) 11. 337-369 1 FRONT ENGINE BRACKET 12. 184-427 1 BOSS 13. 116-946 2 ENGINE SHOCK MOUNT 14. 159-625 1 FUEL FILTER HOSE (06O) 15. 106-709 2 FLG LK NUT (M12-1.75) 16. 106-527 2 SCREW (M14-2.00 X 50mm) 17. 310-599 1 MOUNT 18. 178-358 1 SLEEVE 19. 107-002 2 FLG LK SCREW (M10-1.50 X 30mm) 20. 106-643 2 SCREW (M16-2.00 X 25mm, SOC) 21. 156-277 1 COMPRESSION NUT (05T) 22. 106-545 2 LOCKNUT (M16-2.0,PRV TRQ,10.9) 23. 107-723 2 SCREW (M16-2.00 X 70mm, SOC) 24. 106-266 11 FLG NUT (M10-1.50) 25. 107-001 4 FLG LK SCREW (M10-1.50 X 25mm) 26. 106-336 2 SCREW (M12-1.75 X 90mm) 27. 105-475 2 WASHER (1/2") 28. 156-276 1 FERRULE (05T) 29. 323-365 1 FILTER MOUNT SUPPORT 30. 323-634 1 FILTER MOUNT 31. 106-383 2 FLG LK SCREW (M10-1.50 X 30mm) 32. 106-382 4 FLG LK SCREW (M10-1.5 X 20mm) 33. 315-534 1 FILTER MOUNT 34. 106-124 1 SCREW (M10-1.50 X 110mm) 35. 194-478 - ENGINE OIL FILTER 36. 106-386 2 FLG LOCKNUT (M8-1.25) 37. 106-989 2 FLG LK SCREW (M8-1.25 X 35mm) 38. 156-228 1 ELBOW (02NF-02NF90) 39. 106-396 1 WASHER (M10, HARDENED) 40. 156-275 1 TUBE CONNECTOR (04H-05T) 41. 307-068 1 CABLE BRACKET 42. 307-069 1 LEVER BRACKET 43. 106-640 2 SCREW (M6-1.00 X 20MM, BUT SOC) 44. 106-385 2 FLG LOCKNUT (M6-1.00) 45. 307-553 2 MOUNT TAB 46. 115-180 1 ALL THREAD (1/8-NPT)

REMARKS

OBSOLETE

USE 1 @ 18"

POSITION METAL FACE TO FRAME BOTTOM

NOT SHOWN:

FOOTNOTES:

06

ID0024301

16

JOHN DEERE ENGINE SERVICE

1

10

2

4

6 5

3

7 8 9

03

ID0024302

17

JOHN DEERE ENGINE SERVICE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

194-512 194-478 499-944 170-371 217-450 194-118 194-560 106-090 105-996 194-588 159-255

DESCRIPTION

REMARKS

1 1 1 1 1 4 4 1 1

ENGINE - DEERE DIESEL ENGINE OIL FILTER OIL FILTER SEAL RING FAN BELT ALTERNATOR 65 AMP (REMAN) FAN SPACER FAN LOCK WASHER (M10) SCREW (M10-1.50 X 45MM) PRIMARY FUEL FILTER FUEL FILTER

OBSOLETE

1 1 1 1 2 1

JOHN DEERE TIER II OPER MANUAL STARTER THERMOSTAT GASKET, THERMOSTAT WHEEL SPEED SENSOR SPEED SENSOR O-RING DIODE HARNESS

QTY

NOT SHOWN:

054-087 194-254 194-501 165-883 213-080 159-586 213-085

FOOTNOTES:

NOTE:

03

ID0024302

18

CCV VALVE

8 16 16 13

5

2 1

7

4

19

16 16

3

4

17 3 9

11

6

15 10

14 10

17 18

05

18

12

ID0022594

19

CCV VALVE REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

2 FLG LOCKNUT (M10-1.50) 1 CCV MOUNT BRACKET 4 SCREW (M8-1.25 X 25MM) 4 FLG LOCKNUT (M8-1.25) 2 FLG LK SCREW (M10-1.50 X 30MM) 1 CCV IMPACTOR VALVE 1 VENT HOSE 1 MANIFOLD HOSE AR BULK HOSE (1/2", SOLD PER 1") AR BULK HOSE (3/8", SOLD PER FT) 1 S/O COUPLER (10S-12H90, LG) 1 -06 CCV RETURN FITTING 1 ELBOW (-12H45, SPECIAL) 1 CCV CHECK VALVE 1 CCV 1/2-3/8 REDUCER FITTING 4 WORM CLAMP (3/4" TO 1-1/2") 2 WORM CLAMP (7/16" TO 1") 4 CLAMP 1 ABRASION SLEEVE (1" X 12")

106-387 324-620 105-806 106-386 106-383 499-931 118-280 118-281 116-286 117-458 159-528 499-932 153-161 499-934 499-935 110-353 110-217 499-939 117-671

DESCRIPTION

REMARKS

SEE FOOTNOTE 1

USE 1 @ 13" USE 1 @ 2" & 1 @ 3" SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1 ON MECHANICAL ONLY

NOT SHOWN:

FOOTNOTES:

1. PART OF JOHN DEERE SUPPLIED CCV REMOTE MOUNT(OPTION CODE 2949)

NOTE:

05

ID0022594

20

21

22

MUFFLER & AIR FILTER

24

22 1

2 10

21

14 18

13

17 7

3 18

15

19

9

4

5

25

11 16 20 6

23

26

20 12

A

8

809-211

23

MUFFLER & AIR FILTER REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

QTY

REMARKS

DESCRIPTION

194-558 1 EXHAUST STACK (4") 194-027 1 MUFFLER CLAMP (4.143") 197-762 1 AIR FILTER 197-763 1 PRIMARY ELEMENT 197-764 1 SAFETY ELEMENT 110-367 3 WORM CLAMP (3.25" TO 4.125") 195-734 1 EXTENSION TUBE 116-951 1 REDUCER (3.00" X 2.50") 362-926 1 MOUNTING CLAMP (7.170") 303-749 1 BRACKET 323-634 - FILTER MOUNT 106-999 2 FLG LK SCREW (M10-1.50 X 20mm) 106-266 2 FLG NUT (M10-1.50) 106-386 2 FLG LOCKNUT (M8-1.25) 106-163 2 FLG SCREW (M8-1.25 X 30mm) 120-083 1 MUFFLER 196-195 1 LOWER CLAMP (HEADER PIPE) 307-906 1 HEAT SHIELD 194-225 1 MUFFLER TUBE 196-341 1 MUFFLER CLAMP (2-3/4") 115-180 1 ALL THREAD (1/8-NPT) 110-169 2 WORM CLAMP (2.812" TO 3.750") 195-871 1 STACK CAP (3.000") 323-808 1 HEAT SHIELD MOUNT 105-799 2 FLG LK SCREW (M10-1.50 X 25mm) 118-187 AR FOIL TAPE(HI-TEMP ALUM)2"WD(FT 194-788 1 RESTRICTION INDICATOR (25", H20) 118-200 1 INTAKE HOSE

SEE FOOTNOTE 1

FOOTNOTES

APPLY TO BOTH VERTICAL AND SLOPED LARGE SURFACES.

(USE 120")

NOTE:

A

809-211

24

EXHAUST STACK GUARD 3

2

4

A

1

5

809-216

25

EXHAUST STACK GUARD REF PART NO. NUMBER

1 2 3 4 5

191-365 320-424 180-845 106-994 106-387 196-214

QTY

DESCRIPTION

REMARKS

- RT75 MUFFLER GUARD KIT 2 MUFFLER GUARD 3 SPACER 3 FLG LK SCREW (M10-1.50 X 40MM) 3 FLG LOCKNUT (M10-1.50) 2 U-BOLT CLAMP (4")

FOOTNOTES

NOTE:

A

809-216

26

RADIATOR / COOLER

26 10 12 7 24

10

12

34

35

28 13

38

22 22 11

14 22 33 27 28 39 32 4 20 33 31

36 29

1 19

23 16

9

17

17 37

16 25

15

22

30

19

21

15

3 16

21

6 6 16 16

11 18 19

9 11

8

16 2 11 13 5

05

ID0024287

27

RADIATOR / COOLER REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

QTY

DESCRIPTION

306-459 1 RADIATOR/OIL COOLER 194-115 1 LEFT SIDE FAN SHROUD 194-114 1 RIGHT SIDE FAN SHROUD 115-059 1 UPPER COOLANT HOSE 115-058 1 LOWER COOLANT HOSE 116-128 2 SHOCK MOUNT 110-549 1 SIGHT GAUGE (12N) 365-494 2 RADIATOR ROD 106-709 4 FLG LK NUT (M12-1.75) 107-135 2 CLIP NUT (M8-1.25) 107-001 16 FLG LK SCREW (M10-1.50 X 25mm) 106-992 2 FLG LK SCREW (M8-1.25 X 25mm) 110-134 4 WORM CLAMP (2.062" TO 2.750") 116-108 AR BULK HOSE (5/16", SOLD PER 1") 106-998 2 FLG LK SCREW (M10-1.50 X 70mm) 106-266 18 FLG NUT (M10-1.50) 106-999 6 FLG LK SCREW (M10-1.50 X 20mm) 323-457 1 AIR BARRIER 116-978 AR BULK EDGE (1/4", SOLD PER FT) 106-162 1 FLG SCREW (M8-1.25 X 20MM) 116-107 AR BULK STRIP (1.2", SOLD PER 1") 110-249 5 WORM CLAMP (1/4" X 5/8") 110-259 2 BOLT-ON CLAMP (.625") 364-670 1 PRESSURE TANK 117-339 1 AIR BARRIER 111-084 1 RADIATOR CAP (16 PSI) 106-386 1 FLG LOCKNUT (M8-1.25) 155-162 2 S/O COUPLER (04N-05H) 514-285 1 S/O COUPLER (08N-10H90) 153-160 1 S/O COUPLER (18M-10H45) 116-750 AR BULK HOSE (5/8", SOLD PER 1") 115-286 1 REDUCER (08N-1/4-NF) 110-217 2 WORM CLAMP (7/16" X 1") 155-164 1 S/O COUPLER (04N-05H90) 116-108 12 BULK HOSE (5/16", SOLD PER 1") 116-108 AR BULK HOSE (5/16", SOLD PER 1") 502-046 1 GROMMET (3/4) 111-091 1 RADIATOR CAP 110-333 1 BOLT-ON CLAMP (1")

REMARKS

USE 1@ 24"

63 1/2", SEE FOOTNOTE 3 USE 2 @ 12"

SEE FOOTNOTE 1 USE 1@ 22.5" SEE FOOTNOTE 2

USE 1@ 12" USE 1@ 15"

NOT SHOWN:

FOOTNOTES:

1.

2.

3.

CONNECTS INTO ENGINE WATER PUMP CONNECTS INTO ENGINE CYLINDER HEAD REF 19 (116-978) USES THREE PIECES, TWO @ 24 1/4" & ONE @ 15".

NOTE:

05

ID0024287

28

COLD START KIT

8

SEE FOOTNOTE 2

10 11 5 11

2 6 9 1

3

BLK

10

WHT/BLU TO FRAME HARNESS

05

4 7

ID0024283

29

COLD START KIT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

QTY

191-366 195-843 1 156-204 156-205 323-382 1 215-073 1 215-590 1 306-628 1 156-018 AR 106-654 1 110-169 1 156-272 1 156-204 156-205 106-386 6 106-991 6

DESCRIPTION

REMARKS

COLD START KIT INJECTOR NOZZLE (CLDSTRT) FERRULE (02T) COMPRESSION NUT (02T) BRACKET SENSOR SWITCH RING TERMINAL (.375") VALVE/CANISTER BRACKET BULK TUBING (1/8", SOLD PER 1") FLG LK SCREW (M10-1.50 X 16mm) WORM CLAMP (2.812" TO 3.750") TUBE CONNECTOR (02N-02T90, ORF) FERRULE (02T) COMPRESSION NUT (02T) FLG LK NUT (M8-1.25) FLG LK SCREW (M8-1.25 X 20mm)

INCL REF NO.S 1-12 & 306-607 & 306-608

SEE FOOTNOTE 1 SEE FOOTNOTE 1 USE 1@ 7"

NOT SHOWN:

306-607 306-608

1 1

HORN BUTTON BUTTON COVER

FOOTNOTES:

1.

2.

REF NO.'S 3 & 4 BOLT ONTO ENGINE WITH ALTERNATOR ELECTRICAL HARNESS. USE OF 8 OZ. ETHER CANISTER IS REQUIRED, WHICH WILL COME WITH SEALS AND FOAM.

NOTE:

05

ID0024283

30

NOTES:

ID0134963

31

POWER TRAIN

ID0135064

32

GROUND DRIVE TRANSMISSION MOUNT RT70

11 10

1

2 4

3

10

8 6 1 3

3

9 2

5 4

2

3 4

7

5

6 6

C

808-062

33

GROUND DRIVE TRANSMISSION MOUNT RT70

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

106-346 106-666 106-399 106-398 106-665 106-442 306-969 306-938 166-313 106-469 153-094 157-358

QTY

3 4 6 8 3 4 1 1 1 2 1 1

DESCRIPTION

SCREW (M20-2.50 X 70mm) SCREW (M16-2.00 X 65mm, 10.9) WASHER (M20, HARDENED) WASHER (M16, HARDENED) LOCKNUT (M20-2.50, 10.9) FLG LOCKNUT (M16-2.00, PRV TRQ) RIGHT MOUNT BRACKET LEFT MOUNT BRACKET GROUND DRIVE TRANSMISSION FLG SCREW (M12-1.75 X 30mm) HYD MOTOR - GRD DRIVE HYDRAULIC MOTOR

REMARKS

SUPERCEDED BY 157-358 REFER TO PARTS PAGE "PUMP DRIVE HYDRAULICS"

FOOTNOTES

NOTE:

C

808-062

34

35

36

37

38

39

40

AXLE

HOUSING RIGID

1

1

03

ID0075566

41

AXLE

HOUSING RIGID REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1. 159-512 2 PLUG (M24-1.50, FILL/DRAIN)

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0075566

42

AXLE

REDUCTION GEARS RIGID

11 6

5

1

4

11

2 3 13 11

17

12

10 9 8

16

7

15 14

03

ID0075619

43

AXLE

REDUCTION GEARS RIGID REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1. 501-897 2 THRUST WASHER 2. 499-534 2 SPACER 3. 499-535 2 WASHER 4. 118-061 2 EXTERNAL SNAP RING 5. 157-224 2 O-RING 6. 161-313 2 PLANETARY CARRIER ASS'Y 7. 114-036 2 PLUG, PLANETARY CARRIER 8. 107-349 4 SCREW (M8-1.25 X 20mm) 9. 501-895 6 THRUST WASHER 10. 499-530 18 NEEDLE BEARING (10) 11. 501-894 6 PLANETARY GEAR, (Z-23) DIFF 12. 499-529 2 THRUST WASHER 13. 118-060 6 EXTERNAL SNAP RING 14. 499-536 2 HALF-SHAFT Z12 15. 499-537 2 SLEEVE 16. 499-538 2 SNAP RING D32 17. 499-539 2 HALF-SHAFT

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0075619

44

AXLE

WHEEL HUB RIGID

4

3

2

1

5

9

7

10 11

12 12 6 8

04

ID0113893

45

AXLE

WHEEL HUB RIGID REF PART NO. NUMBER

QTY

DESCRIPTION

1. 501-896 2 CROWN GEAR, (Z-60) PLANETARY 2. 501-899 2 WHEEL CARRIER, PLANETARY 3. 501-900 2 WHEEL HUB ASS'Y, PLANETARY 4. 499-499 8 STUD, PLANETARY WHEEL HUB 5. 157-749 2 SEAL, CASSETTE (PLANETARY) 6. 499-531 4 BEARING 7. 499-532 2 SEAL RING 8. 159-512 2 PLUG (M24-1.50, FILL/DRAIN) 9. 107-350 12 LK SCREW (M10-1.50 X 45mm) 10. 178-175 12 CENTERING BUSHING 11. 499-501 2 RING 12. 499-533 2 O-RING

REMARKS

INCLUCES REF #4 QTY PER WHEEL

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0113893

46

AXLE

GEAR/PINION STEERABLE/RIGID

1

4

3

2

5 6

1

04

ID0113843

47

AXLE

GEAR/PINION STEERABLE/RIGID REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

499-524 168-606 168-607 168-608 168-609 168-610 168-611 168-612 168-613 168-614 168-615 126-201 501-887 157-220 157-748 501-888 118-058

QTY

2 1 1 1 1 1

DESCRIPTION

BEVEL GEAR SET Z12/32 SHIM (2.50mm) SHIM (2.60mm) SHIM (2.70mm) SHIM (2.80mm) SHIM (2.90mm) SHIM (3.00mm) SHIM (3.10mm) SHIM (3.20mm) SHIM (3.30mm) SHIM (3.40mm) BEARING, GEAR & PINION WASHER (M31.4) O-RING OIL SEAL, GEAR & PINION FLANGE, GEAR & PINION EXTERNAL SNAP RING

REMARKS

ALL PARTS SHOWN, BUT NOT NUMBERED, ARE INCLUDED IN GEAR SET.

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0113843

48

AXLE

DIFF LOCK STEERABLE/RIGID

2 4

7

6 3

6

1

5

5 4

03

ID0113847

49

AXLE

DIFF LOCK STEERABLE/RIGID REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1. 499-488 1 O-RING 2. 499-489 1 PISTON 3. 499-490 1 O-RING 4. 499-491 2 SNAP RING (D12) 5. 499-492 2 SPACER 6. 499-493 2 SPRING 7. 499-494 1 FORK

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0113847

50

AXLE

AXLE HOUSING STEERABLE

14 10 15

12

11 13 1 2 3

8

4 5 13

9

6

7

12

05

ID0113842

51

AXLE

AXLE HOUSING STEERABLE REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1. 107-338 1 BELLEVILLE WASHER 2. 168-605 1 SHIM 3. 178-167 1 BUSHING 4. 178-168 2 BUSHING 5. 157-745 2 OIL SEAL (30 X 44 X11) 499-947 2 OIL SEAL (30 X 44 X14) 6. 126-200 2 SPHERICAL BEARING (METRIC) 7. 107-339 2 BELLEVILLE WASHER 8. 107-340 5 SCREW (M12-1.75 X 33mm) 9. 159-512 2 PLUG (M24-1.50, FILL/DRAIN) 10. 499-472 2 PIN LOCKING WASHER 11. 159-511 1 VENT PLUG (M10-1) 12. 499-461 2 THRUST WASHER 13. 499-462 2 BUSHING 14. 500-1697 1 LH BUSH (SPACER) 15. 500-1698 1 SCREW (M4-.7 X 10mm, 10.9)

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0113842

52

AXLE

DIFFERENTIAL STEERABLE/RIGID

4 6 7

7 3

5

2 7 7

4 1 2 3

03

ID0113848

53

AXLE

DIFFERENTIAL STEERABLE/RIGID REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1. 499-525 DIFFERENTIAL KIT 2. 126-202 2 BEARING, DIFF HSNG 3. 501-893 2 RING NUT 4. 107-348 2 SCREW (M6-1.00 X 10mm) 5. 107-346 12 LK SCREW (M10-1.50 X 75mm) 6. 499-485 1 SLEEVE 7. 499-487 4 PIN

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0113848

54

AXLE

WHEEL HUB STEERABLE

1 3 4

2

7

5 8 9

6

05

ID0113845

55

AXLE

WHEEL HUB STEERABLE REF PART NO. NUMBER

QTY

DESCRIPTION

1. 501-896 2 CROWN GEAR, (Z-60) PLANETARY 2. 501-899 2 WHEEL CARRIER, PLANETARY 3. 501-900 2 WHEEL HUB ASS'Y, PLANETARY 4. 499-499 8 STUD, PLANETARY WHEEL HUB 5. 157-749 2 SEAL, CASSETTER (PLANETARY) 6. 499-531 4 BEARING 7. 107-350 12 LK SCREW (M10-1.50 X 45mm) 8. 178-175 12 CENTERING BUSHING 9. 499-501 2 RING

REMARKS

QTY PER WHEEL

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0113845

56

AXLE

REDUCTION GEAR STEERABLE

3 6

1

9 3

7 3

2

4 5 8

05

ID0113846

57

AXLE

REDUCTION GEAR STEERABLE REF PART NO. NUMBER

QTY

DESCRIPTION

191-362 PLANET GEAR KIT 1. 118-060 6 EXTERNAL SNAP RING 2. 499-529 2 THRUST WASHER 3. 501-894 6 PLANETARY GEAR, (Z-23) DIFF 4. 499-530 18 NEEDLE BEARING (10 ROLLERS @ BAG) 5. 501-895 6 THRUST WASHER 6. 161-313 2 PLANETARY CARRIER ASS'Y 7. 114-036 2 PLUG, PLANETARY CARRIER 8. 107-349 4 SCREW (M8-1.25 X 20mm) 9. 157-224 2 O-RING

REMARKS

INCL REF #'S 1,3,4 & 5 - 3 KITS PER WHEEL ASSEMBLY ONE PER 191-362 ONE PER 191-362 THREE BAGS PER 191-362 ONE PER 191-362

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0113846

58

AXLE

DOUBLE JOINT STEERABLE

1

3

4

03

2

ID0113841

59

AXLE

DOUBLE JOINT STEERABLE REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1. 499-526 2 DOUBLE JOINT 2. 501-897 2 THRUST WASHER 3. 499-535 2 WASHER 4. 118-061 2 EXTERNAL SNAP RING

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0113841

60

AXLE

STEERING CYLINDER STEERABLE

8 9 10

19 20

11 3

5

17

9

8

16 12

6

4

2

10

1

15 13 14 7 18

04

ID0113844

61

AXLE

STEERING CYLINDER STEERABLE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

QTY

106-077 2 107-457 2 178-172 2 157-747 2 106-472 3 499-473 1 501-881 2 162-029 2 107-343 2 162-028 2 162-030 1 107-307 4 107-342 2 190-894 1 162-031 1 499-523 2 115-065 2 115-066 2 107-341 12 501-882 1

DESCRIPTION

NUT (M16-2.00, 10.9) SCREW (M16-2.00 X 75mm, 10.9) BUSHING OIL SEAL SCREW (M16-2.00 X 35mm) KING PIN KING PIN, SWIVEL HOUSING STEERING ARM NUT, BALL JOINT BALL JOINT STEERING CYLINDER SCREW (M12-1.75 X 45mm) NUT (M18-1.50, SELF LOCK) OIL SEAL KIT TIE ROD BUSHING (25 X 17 X 13) ZERK, METRIC (M6 X 1) ZERK, METRIC (M6 X 1-45 DEG) SCREW (M12-1.75 X 30mm) KING PIN, SWIVEL HOUSING

REMARKS

OBSOLETE

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0113844

62

63

64

AXLE-POTENTIONMETER STEERABLE

BEGINS WITH S/N RT75HV50000013 ENDS WITH S/N CMWRT75MA70000059 & CMWRT75HV0000062

9 1

8

2 3

7

4

5 6

04

ID0144062

65

AXLE-POTENTIONMETER STEERABLE

BEGINS WITH S/N RT75HV50000013 ENDS WITH S/N CMWRT75MA70000059 & CMWRT75HV0000062 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

300-1269 499-508 499-509 499-510 499-511 499-512 115-065 156-260 105-431 155-103

QTY

2 1 1 1 1 1 1 1 1

DESCRIPTION

STEER SENSOR KIT (RT75) SCREW (M8-1.25 X 45mm) COVER KIT POTENTIOMETER REAR STEER KIT O-RING ZERK (M6 X 1) STREET ELBOW (06N-06NF90) JAM NUT (9/16-NF) UNION (06S-06NFX90)

REMARKS

INCLUDES ITEMS 2, 3, 7, 8 & 9

INCLUDES ALL ITEMS IN BOX

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0144062

66

AXLE-POTENTIOMETER STEERABLE (RT75) BEGINS WITH S/N: CMWRT75MC70000060 BEGINS WITH S/N: CMWRT75HV70000063

1

2

3 7

4

5

6

01

ID0180507

67

AXLE-POTENTIOMETER STEERABLE (RT75) BEGINS WITH S/N: CMWRT75MC70000060 BEGINS WITH S/N: CMWRT75HV70000063 REF PART NO. NUMBER

1 2 3 4 5 6 7

215-1084 499-508 499-509 300-4837 499-511 499-512 115-065 105-431

QTY

2 1 1 1 1 1 1

DESCRIPTION

STEER SENSOR KIT SCREW (M8-1.25 X 45mm) COVER KIT POTENTIOMETER REAR STEER KIT O-RING ZERK (M6 X 1) JAM NUT (9/16-NF)

REMARKS

INCLUDES ITEMS 2, 3 & 7

INCLUDES ALL ITEMS IN BOX

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0180507

68

HYDROSTATIC DRIVE LINE

2

9

8

3 7 3

1 1

3

4 4

6 5

3 2 4 5

8 4

04

9

ID0025075

69

HYDROSTATIC DRIVE LINE REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

7.

8.

9.

2 2 4 4 4 1 1 8 8

182-199 182-173 182-145 115-003 182-204 166-234 166-231 105-119 105-120

DESCRIPTION

410 SERIES HUB MACHINING FLANGE YOKE CROSS/BEARING KIT (1-3/16") ZERK (1/4-NF, STR) U BOLT KIT FRONT DRIVE SHAFT REAR DRIVE SHAFT BOLT (7/16 NF X 1-1/2 ") NUT (7/16 NF)

REMARKS

USE LOCTITE 242 OR EQUIVALENT

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0025075

70

71

72

SERVICE BRAKE SYSTEM

4

1 5 8 7

19

9

6 16

13

3

10

20

17

2 18

15

14 11

21

12 03

ID0138247

73

SERVICE BRAKE SYSTEM REF PART NO. NUMBER

1 2

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

306-996 163-219 191-293 505-026 165-724 361-887 115-484 178-383 107-242 110-102 110-078 106-415 115-613 149-861 156-282 105-053 106-266 107-002 105-093 105-504 149-863 125-407 115-329 163-088 505-095 160-534 505-083

QTY

1 1

1 2 1 1 1 1 1 1 1 1 1 3 3 1 1 1 1 1

DESCRIPTION

BRAKE PEDAL MASTER CYLINDER SEAL REPAIR KIT MASTER CYL CAP (1-5/8 SAE) CAP GASKET MASTER CYLINDER ROD EXTERNAL SNAP RING (1.000") PIN (1.000" X 3.900") LK BOLT (3/8-NC X1-1/2", NLK) ROD END (3/8-NF, FM) MACH BUSHING (1.000", 14GA) WASHER (.406") EXTENSION SPRING BRAKE HOSE (3/16T X 19") FLARE FITTING (03TM-04TFM) NUT (3/8-NC) FLG NUT (M10-1.50) FLG LK SCREW (M10-1.50 X 30mm) NUT (3/8-NF) COTTER PIN (.187 X .750) BANJO S/O CONNECTOR (08-05T) BRONZE BUSHING (1.000") DUST COVER BRAKE CALIPER BRAKE PAD (PAIR) BRAKE CALIPER BRAKE PAD (PAIR)

REMARKS

COMES WITH GASKET

SEE FOOTNOTE 1

USED ON HYDROSTAT MACHINES USED ON POWERSHIFT MACHINES

NOT SHOWN:

FOOTNOTES:

1. BANJO CONNECTOR (REF #18) COMES WITH 2X 502-178 (REF #22)

NOTE:

03

ID0138247

74

75

76

TIRE - WHEEL

31 X 15.5-15 E10TT)

1

2

6

5 4 3

09

ID0042383

77

TIRE - WHEEL

31 X 15.5-15 E10TT) REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

QTY

205-451 4 205-126 4 205-1153 4 205-168 4 205-165 4 499-521 108-186 -

DESCRIPTION

TIRE & WHEEL (31 X 15.5-15,E10TT) TIRE (31 X 15.5-15, E10TT) WHEEL (15" X 15.5", W/8) VALVE STEM (.625") VALVE CAP (.305"-32) LUG NUT (M20-1.50) CONICAL WASHER (2.5 X 34)

REMARKS

INCL. REF. #'S 1, 2, 3

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) FOR REPLACEMENT OF O-RINGS.

09

ID0042383

78

79

80

NOTES:

ID0134963

81

FRAME COMPONENTS

ID0135068

82

BACKFILL BLADE ASSEMBLY RT70, 75

15 1 27 26 4

27

2 35 6

12

26

15

36

4 25 27

6 25

4

13

3

OPTION

34

18

14

33 16

6

20

27 14 12

30 29

14

32

30 29 28

8 24

1 17

10 11 21

7 5

15

16

9

4

15 28

14

22

23 24 19

31

08

ID0091565

83

BACKFILL BLADE ASSEMBLY RT70, 75 REF PART NO. NUMBER

QTY

DESCRIPTION

1. 105-416 2. 178-572 3. 151-057 4. 125-771 5. 300-7763 6. 181-982 7. 107-434 8. 106-164 9. 181-981 10. 183-767 11. 125-770 12. 125-822 13. 331-475 14. 125-773 15. 106-470 16. 181-975 17. 178-584 18. 183-768 19. 308-921 20. 151-070 21. 300-4338 300-4321 22. 151-202 23. 178-532 24. 314-104 25. 178-394 26. 105-475 27. 105-830 28. 106-012 29. 309-138 30. 106-383 31. 314-087 32. 322-360 33. 106-330 34. 106-386 35. 106-632 36. 179-553

2 1 5 1 4 1 1 1 1 1 2 1 4 4 2 1 1 1 1 1 1 2 2 2 4 6 2 2 1 2 4 4 2 2

WASHER (5/8") PIN (1.75" X 12.75") CYL (2.0" X 1.25" X 8.0") COMPOSITION BUSHING (1.25") PIN TAPERED INSERT (1.25") ROLL PIN 3/8 X 1-5/8 FLG LK SCREW (M10-1.50 X 30mm) TAPERED INSERT (1") TAPERED PIN (25.4mm X 60mm) COMPOSITION BUSHING (1") COMPOSITION BUSHING (1.750") PIVOT COMPOSITION BUSHING (1.750") FLG SCREW (M16-2.00 X 40mm) TAPERED INSERT (1.75") TAPERED PIN (1.750" X 13.90") TAPERED PIN (44.4mm X 205mm) LIFT ARM CYL (3" X 1.75" X 8") BACKFILL BLADE ASSEMBLY (72") BACKFILL BLADE ASSEMBLY (80") CYL (2" X 1' X 3.38") PIN (1.750" X 7.000") TILT BLADE RETAINER TAPERED PIN (1.250" X 4.250") WASHER (1/2") FLG LK BOLT (1/2-NC X 1-1/4") FLANGE BOLT (5/8-NC X 3") RETAINER FLG LK SCREW (M10-1.50 X 30mm) 72" CUTTING EDGE FITTING GUARD (3.0" CYL) SCREW (M8-1.25 X 70mm) FLG LOCKNUT (M8-1.25) FLG LK SCREW (M12-1.75 X 35mm, SER) TAPERED PIN (1.250" X 2.560")

REMARKS

STANDARD - SEE FOOTNOTE 1 & 2 OPTIONAL

SEE FOOTNOTE 2

OPTION

FOOTNOTES:

1. 72" BACKFILL BLADE 331-747 IS SUPERSEDED BY 300-4338. BEGINS WITH S/N____________.

80" OPTIONAL BACKFILL BLADE 331-749 IS SUPERCEDED BY 300-4321. BEGINS WITH S/N____________.

2. USE OF EITHER 300-4321 OR 300-4338 REQUIRES 6X OF P/N 106-012 BOLTS, (ITEM REF. #28).

NOTE:

08

ID0091565

84

85

86

COUNTERWEIGHT/GRILLE (RT SERIES)

ENDS WITH SERIAL NUMBER (SEE NOTES)

3

12 2

4

7 13 6 19

1

14

7 21

18

14

1

20

13

17 16 15

15

9

11 2

10

5

4

SEE FOOTNOTE 2

8 3

6

1

15

TRACTOR FRAME

TRACTOR FRAME CROSSMEMBER ID0030955

87

COUNTERWEIGHT/GRILLE (RT SERIES)

ENDS WITH SERIAL NUMBER (SEE NOTES) REF PART NO. NUMBER

QTY

DESCRIPTION

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

106-633 6 SCREW (M20-2.5 X 130mm) 106-665 6 LOCKNUT (M20-2.50, 10.9) 375-370 1 CASTING (FRAME NOSE) 327-389 2 CLAMP BAR 313-825 2 GRILLE 118-400 2 SHIM (.075") 117-386 2 EXTENSION SPRING 308-723 2 SCREEN 106-987 2 FLG LK SCREW (M6-1.00 X 16mm) 178-873 2 SCREEN RETAINER 106-574 2 CLIP NUT(M6-1.00) 307-909 - FRONT HOOD SUPPORT 106-237 3 LOCKNUT (M6-1.00, PRV TRQ, NLK) 105-284 3 WASHER (3/16") 106-161 3 FLG SCREW (M6-1.00 X 20mm) 318-726 1 PLATE 217-267 1 HYDROSTAT FRAME HARNESS 217-268 1 POWERSHIFT FRAME HARNESS 18. 306-609 1 HIGH FREQUENCY HORN 192-006 1 HIGH FREQUENCY HORN 192-005 1 HORN BRACKET 19. 106-992 2 FLG LK SCREW (M8-1.25 X 25MM) 20. 106-386 2 FLG LOCKNUT (M8-1.25) 21. 323-673 1 HORN BRACKET

REMARKS

SEE FOOTNOTE 1, 3 & 4 SEE FOOTNOTE 4 SEE FOOTNOTE 3 SEE FOOTNOTE 2 & 4 SEE FOOTNOTE 4

OBSOLETE

NOT SHOWN:

FOOTNOTES:

1- TORQUE BOLT TO 350 FT/LB (475 N/m) 2- INSTALL REF #4 (327-389) WITH THICK EDGE TO FRAME. 3- REFER TO NOSE CASTING INSTALLATION INSTRUCTIN 051-420.

4- 104-186, BOLT AND SHIM KIT, INCLUDES REF #'S 1,2,4 & 6.

NOTE:

1. RT75 ENDS WITH S/N 5Z0663.

2. RT95 / RT115 ENDS WITH S/N 5Z0676

15

ID0030955

88

COUNTERWEIGHT/GRILLE (RT SERIES) BEGINS WITH SERIAL NUMBER (SEE NOTES)

10 1

5 2

3 5 2

13 15

9

4

23

10

8

3

14

4

14

21

16

7

22

12 17 18 19

18

19 22

11

20 14 22

22

SEE FOOTNOTE 2 A

809-861

89

COUNTERWEIGHT/GRILLE (RT SERIES) BEGINS WITH SERIAL NUMBER (SEE NOTES) REF PART NO. NUMBER

QTY

1 375-457 2 106-633 3 106-665 4 106-399 5 307-531 7 178-873 8 106-574 9 106-987 10 117-386 11 308-723 12 307-909 13 106-386 14 106-161 15 323-673 16 106-992 17 318-726 18 105-284 19 106-237 20 217-267 21 192-006 22 329-358 23 106-385

1 NOSE CASTING 6 BOLT (M20-2.50 X 130MM) 5 LOCKNUT (M20-2.50, 10.9) 11 WASHER (M20, HARDENED) 2 CLAMP BAR 2 SCREEN RETAINER 2 CLIP NUT (M6-1.00) 2 FLG LK SCREW (M6-1.00 X 16MM) 2 EXTENSION SPRING 2 SCREEN 1 FRONT HOOD SUPPORT 1 FLG LOCKNUT (M8-1.25) 4 FLG SCREW (M6-1.00 X 20MM) 1 HORN BRACKET 1 FLG LK SCREW (M8-1.25 X 25MM) 1 PLATE 3 WASHER (3/16") 3 LOCKNUT (M6-1.00,PRV TRQ,NLK) 1 HYDROSTAT FRAME HARNESS 1 HIGH FREQUENCY HORN 4 SHIM 1 FLG LOCKNUT (M6-1.00)

DESCRIPTION

REMARKS

SEE FOOTNOTE 1, 2 & 3

SEE FOOTNOTE 2

NOT SHOWN

FOOTNOTES

1. TORQUE BOLT TO 350 ft/lbs.

2. USE SHIMS (REF #22) WHEN MOUNTING NEW CAST NOSE (375-457) ONTO TRACTOR FRAME BEFORE SERIAL NUMBERS LISTED IN FOOTNOTES 4 & 5.

3. REFER TO NOSE CASTING INSTALLATION INSTRUCTIONS 051-420 FOR CORRECT TORQUE SEQUENCE.

NOTE

1. RT75 BEGINS WITH SERIAL NUMBER 5Z0664.

2. RT95/RT115 BEGINS WITH SERIAL NUMBER 5Z0677.

A

809-861

90

91

92

TRENCH DEPTH METER/ODOMETER MT

1 4 5 2 6 3

7 8

(7)

.20

C

808-876

93

TRENCH DEPTH METER/ODOMETER MT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

QTY

107-004 3 315-744 1 106-709 3 105-680 2 107-597 2 107-451 AR 214-692 1 107-414 2

DESCRIPTION

FLG LK SCREW (M12-1.75 X 45mm) SENSOR BRACKET FLG LK NUT (M12-1.75) NUT (M4, W/LK WSHR) WASHER (M4) SHIM (.135") PROXIMITY SWITCH SCREW (M4-0.70 X 30mm, BUT SOC)

REMARKS

RT95 / RT115 & SEE FOOTNOTE 2 RT95 / RT115 & SEE FOOTNOTE 2

SEE FOOTNOTE 1

NOT SHOWN

FOOTNOTES

1.

2.

SHIMS (107-451) ARE USED TO ADJUST SPACING OF PROXIMITY SWITCH (214-692) FROM THE DRIVE SHAFT. RT75 USES 2X 105-003 (FLG LOCKNUT 5/16-NC) & 2X 105-190 (BOLT 5/16-NC X 2-3/4")

NOTE

C

808-876

94

FRONT COUNTERWEIGHT

4

9

7 5

8 7 2

3

1

6 2 5

3

4

1

03

ID0121773

95

FRONT COUNTERWEIGHT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

100-863 375-369 106-352 106-488 106-587 179-605 319-948 106-399 106-611 319-947

QTY

8 2 2 2 2 1 8 8 1

DESCRIPTION

REMARKS

COUNTERWEIGHT KIT WEIGHT CASTING NUT (M24-3.00) WASHER (M24, HARDENED) LOCKNUT (M24-3.0, PRV TRQ, 10.9) ALL THREAD ROD (M24 X 15.00) RIGHT WEIGHT RACK WASHER (M20, HARDENED) SCREW (M20-2.50 X 40MM, 10.9) LEFT WEIGHT RACK

INCLUDES REF. NO'S 1-9 USED ONLY WITH 3 WEIGHTS OR LESS USED ONLY WITH 3 WEIGHTS OR LESS

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0121773

96

ENGINE ENCLOSURE 3

12

7

16 19

1

4 5

21 27

20

8

28

31

8 26 15

14 15 32 29

30

13

2

11 17

12

6

18 23

9

25 22 10

25

15

24

30°

14

EXHAUST STACK ORIENTATION FRONT OF MACHINE

04

ID0024291

97

ENGINE ENCLOSURE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

QTY

REMARKS

DESCRIPTION

191-227 SIDE PANEL LOCK KIT 334-092 1 LEFT SIDE PANEL 334-091 1 RIGHT SIDE PANEL 194-558 1 EXHAUST STACK (4") 194-027 1 BAND CLAMP (4.143") 323-496 1 MID HOOD ASSEMBLY 307-909 1 FRONT HOOD SUPPORT 310-716 1 FIREWALL 111-043 9 INSULATION STUD 117-341 1 SOUND INSULATION 211-087 1 BATTERY JUMPER TERMINALS (RED) 117-344 AR BULK EDGE (3/16", SOLD PER 1') 110-681 4 DRAW LATCH 117-344 AR BULK EDGE (3/16", SOLD PER 1') 107-001 7 FLG LK SCREW (M10-1.50 X 25mm) 106-266 4 FLG NUT (M10-1.50) 107-003 11 FLG LK SCREW (M12-1.75 X 35mm) 106-709 9 FLG LK NUT (M12-1.75) 106-558 3 CLIP NUT (M10-1.50) 106-048 8 LOCKNUT (#10-24) 106-408 8 BOLT (#10-24 X 1-1/4",SOC, GD8) 116-489 AR BULK EDGE (1/8", SOLD PER 1') 116-421 AR BULK EDGE (1/8", SOLD PER 1') 217-819 1 BATTERY DISCONNECT SWITCH 110-253 8 POP RIVET (3/16" X 1/2") 106-725 2 SCREW (M10-1.50 X 65mm, SOC) 106-081 2 SCREW (M10-1.50 X 35mm, 12.9) 106-387 8 FLG LOCKNUT (M10-1.50) 194-345 2 LOCK CABLE 318-523 2 LOCK BRACKET 110-348 4 POP RIVET(3/16" X .664") 214-873 1 POSITIVE JUMPER CABLE 320-255 1 THREAD PLATE 107-004 1 FLG LK SCREW (M12-1.75 X 45mm) 115-686 2 BULK EDGE (5/32", SOLD PER 1")

USE 2@ 25" USE 1@ 16"

USE 2@ 21" USE 1@ 26" INCLUDES HARDWARE

SEE FOOTNOTE 1 5-1/2" EACH

NOT SHOWN:

FOOTNOTES:

1.

REF #31 (107-004) IS USED IN ATTACHED AS REQUIRED.

POSITION SHOWN ONLY,

THIS WILL ALLOW REF #26 (LOCK CABLE) TO BE

NOTE:

04

ID0024291

98

TILT STEERING

RT75H / RT75M / RT95H / RT95M 10

22 26

19

1

32 11

8

23

25 16

18 20 2

27 3

15

36 10 36

46 45

10 9

44

12

4

36

5

10 39

21

17

37 48 7 6 5

6

14 31

0 2 1

1

6 7

30

36

40

4 3

4 5 2 3

38 33 10

36

35 6

33

13 47

36 24 34

41

7 34 28

29

43 36 24

12

42

ID0024293

99

TILT STEERING

RT75H / RT75M / RT95H / RT95M REF PART NO. NUMBER

QTY

1. 160-428 1 2. 215-243 1 3. 318-555 1 4. 318-556 1 5. 306-603 1 6. 315-142 1 7. 106-470 4 8. 306-608 1 9. 107-864 4 10. 105-1550 14 11. 306-607 1 12. 306-433 1 499-855 499-856 499-857 499-858 13. 105-185 2 14. 107-580 2 15. 214-301 1 107-580 2 105-680 2 16. 211-067 1 17. 105-680 2 18. 214-852 1 214-961 214-962 19. 211-273 1 20. 362-823 AR 21. 215-1677 1 22. 110-730 1 23. 217-762 1 24. 105-1552 4 25. 165-817 1 26. 105-361 1 27. 106-425 2 28. 105-095 2 29. 106-381 2 30. 318-560 2

DESCRIPTION

STEERING WHEEL F-N-R SHIFTER MAIN CONSOLE CONSOLE CENTER SECTION AUDIO ALARM PEDESTAL FLG SCREW (M16-2.0 X 40mm) BUTTON COVER BOLT (3/8-NC X 1.00", BUT SOC) SCREW (M6-1.00 X 25MM) HORN BUTTON STEERING COLUMN KNOB KIT TILT LEVER KIT SHAFT KIT GAS SPRING KIT ( CYLINDER ) BOLT (#10-24 X 1/2 ", RD SLT) SCREW (M4-0.70 X 16mm, BUT SOC) ACCESSORY SOCKET SCREW (M4-0.70 X 16mm, BUT SOC) NUT (M4, W/LK WSHR) DOME PLUG (.687") NUT (M4,W/LKWSHR) IGNITION SWITCH KEY, PAIR SWITCH MOUNTING NUT 5-GAUGE CLUSTER COVER PLUNGER SWITCH STEERING WHEEL CAP ROCKER SWITCH (SPDT) SCREW (M6-1.00 X 16MM) SWITCH GASKET JAM NUT (13/16 NF) (M5-0.80 X 40mm, SOC) WASHER (1/4") FLG LK SCREW (M8-1.25 X 25MM) ACCESS DOOR

REMARKS

POWERSHIFT UNITS ONLY

OBSOLETE - SEE FOOTNOTE 3 3 W/ POWERSHIFT UNITS, 2 W/ HYDROSTAT UNITS USE ADAPTER HARNESS 215-1780, SEE FOOTNOTE 2 HYDROSTAT UNITS ONLY HYDROSTAT UNITS ONLY NOT USED ON POWER SHIFT UNITS NOT USED ON POWER SHIFT UNITS

NOT SHOWN:

211-078 214-449

1 1

CONNECTOR CAP (TURK RS-CC) DIODE CONNECTOR

FOOTNOTES:

NOTE:

12

ID0024293

100

TILT STEERING

RT75H / RT75M / RT95H / RT95M REF PART NO. NUMBER

QTY

DESCRIPTION

31. 106-049 6 BOLT (#10-24 X 3/4", PLPS) 32. 107-744 2 WASHER (M6) 33. 106-048 8 LOCKNUT (#10-24) 34. 106-574 2 CLIP NUT (M6-1.00) 35. 308-888 1 CUP HOLDER 36. 107-801 18 WASHER (M6) 37. 110-208 1 LEVEL INDICATOR 38. 116-525 1 BUMPER 39. 106-252 2 JAM NUT (5/16-NC) 40. 107-800 2 WING SCREW (M6-1 X 25mm) 41. 318-557 1 CONSOLE BASE 42. 115-686 AR BULK EDGE (5/32",SOLD PER 1") 43. 314-487 1 BRACE 44. 220-1241 1 30 PIN CONTROLLER V3 45. 106-161 2 FLG SCREW (M6-1.00 X 20MM) 46. 106-538 2 LOCKNUT (M6-1.00,PRV TRQ,10.9) 47. 106-386 2 FLG LOCKNUT (M8-1.25) 48. 106-816 2 SCREW M3.5 X 14MM, PH ZPS

REMARKS

USE 1 @ 25" NOT USED ON POWER SHIFT UNITS SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. USED WITH REAR STEER OPTION OR REAR STEER AND CRUISE CONTROL OPTION WHEN UPDATED WITH THE REAR STEER KITS 190-1437 OR 190-1438.

CRUISE ONLY OPTION USES MODULE 220-569 @1X, BOLTS 105-815 @ 2X, AND NUTS 106-048 @ 2X. 2. BEGINS WITH S/N CMWRT95MCB0000380, CMWRT95HHB0000413 3. FOR REPLACEMENT GAUGE CLUSTER ORDER KIT 190-2725.

NOTE:

12

ID0024293

101

102

GAUGE CLUSTER

RT70 / RT75 / RT90 / RT95 / RT115 / HT115

10 3 7 2 4

6

11

5 9

1

8 01

ID0441941

103

GAUGE CLUSTER

RT70 / RT75 / RT90 / RT95 / RT115 / HT115 REF PART NO. NUMBER

QTY

DESCRIPTION

1 362-2747 1 GAUGE CLUSTER PANEL 2 211-1016 1 ANALOG OIL PRESSURE GAUGE (BLACK) 3 211-1014 1 ANALOG WATER TEMP GAUGE (BLACK) 4 211-1019 1 ANALOG TACH (BLACK 5 211-1021 1 FUEL GAUGE BLACK (VOLTAGE) 6 211-1003 1 2.06" VOLTMETER GAUGE (BLACK) 7 220-664 3 INDICATOR DISPLAY 8 107-358 10 WELLNUT (M4-0.7 X 12.67MM LG) 9 362-1313 1 HOLE PLUG 10 107-393 10 SCREW (M4-0.70 X 16MM, BX) 11 214-563 1 RED LED (12V DC)

REMARKS

USE REF# 11 ON MECHANICAL UNITS USED ON MECHANICAL UNITS ONLY

NOT SHOWN:

215-2782

1

RT GAUGE CLUSTER HARNESS

FOOTNOTES:

NOTE:

01

ID0441941

104

FENDERS AND COVERS

34 17 37

30

10

36

40

19

35

4

26

11

6

49 33

39

23 3

49

43 45 44

12 20 49

47

46

41

12

48

42

22

27 44

26 11 20

18

31

38

12 25

19

15

20

20

18

12 16

20 20 13 49

25

20

16

41

32

33 25

2

7

20 11

33

24 49 20 12

20 12 49

11

21

8

1

22

49 25

13 9

12 12

28 12 16 14

49

6 5

16 20 11 12

05

29 20 26

ID0024294

105

FENDERS AND COVERS REF PART NO. NUMBER

QTY

DESCRIPTION

306-492 1 REAR PANEL 323-977 1 REAR PANEL 2. 306-491 1 LEFT FENDER 3. 306-490 1 RIGHT FENDER 4. 305-657 1 RIGHT OUTSIDE FENDER 5. 305-656 1 LEFT OUTSIDE FENDER 6. 308-897 2 PANEL 7. 250-622 1 MANUAL COMPARTMENT 8. 318-793 1 FLOOR PLATE 9. 107-461 1 LOCKING LATCH 10. 120-085 4 ADJUSTABLE LOUVER (23-0005) 11. 107-778 26 SCREW (M8-1.25 X 30mm, BUT SOC) 12. 107-135 38 CLIP NUT (M8-1.25) 13. 306-796 2 TAB 14. 309-816 2 STRAP 15. 217-762 1 ROCKER SWITCH (SPDT) 16. 106-992 14 FLG LK SCREW (M8-1.25 X 25mm) 17. 307-644 1 COVER 18. 107-358 8 WELLNUT (M4-0.7) 19. 107-580 8 SCREW (M4-0.70 X 16mm,BUT SOC) 20. 107-629 43 WASHER (M8) 21. 110-348 3 POP RIVET (3/16" X .664") 22. 105-1549 7 SCREW (M6-1.00 X 20MM) 23. 106-574 5 CLIP NUT (M6-1.00) 24. 306-795 1 TAB 25. 309-434 6 TAB 26. 107-096 9 LOCKNUT (M8-1.25, NLK) 27. 362-823 4 COVER 28. 117-360 2 GRAB HANDLE 29. 309-847 1 FUEL SENDER COVER 30. 106-155 20 SCREW (#4-40 X 5/8", PAN PLPS) 31. 120-084 4 HOSE ADAPTER (23-0048) 32. 120-123 1 HOSE ADAPTER (23-0090) 33. 106-989 4 FLG LK SCREW (M8-1.25 X 35mm) 34. 106-724 2 FLG SCREW (M10-1.50 X 25mm) 35. 105-894 2 LOCKNUT(M10-1.50,PRV TRQ,10.9) 36. 316-945 1 RELAY MOUNT 37. 217-194 10 MICRO RELAY BASE 38. 217-764 1 ROCKER SWITCH (SPDT) 39. 157-333 1 HOLE PLUG (.750") 40. 107-744 4 WASHER (M6) 41. 106-388 7 WASHER (M6) 42. 217-072 1 ROCKER SWITCH 43. 217-817 1 ROCKER SWITCH (SEALED) 44. 110-854 4 SWITCH ACTUATOR GUARD 45. 165-817 2 SWITCH GASKET 46. 107-312 4 SREW (M6-1.00X25MM, BUT SOC) 47. 107-871 4 WELLNUT (M6-1.00 X 20.35MM LG) 48. 300-9262 1 SWITCH MOUNT 49. 106-163 22 FLG SCREW (M8-1.25 X 30MM)

REMARKS

1.

ASSY USED WITH A/C OR HEATER KIT

USED WITH A/C OR HEATER KIT SEE FOOTNOTE 3

USED WITH AXLE LOCK

SEE FOOTNOTE 5

USED WITH A/C OR HEATER KIT USED WITH A/C OR HEATER KIT USED WITH A/C OR HEATER KIT USED WITH FRAME TILT OPTION SEE FOOTNOTE 1

SEE FOOTNOTE 2

SEE FOOTNOTE 4 & 5 SEE FOOTNOTE 4 & 5 USED WITH AXLE LOCK AND REAR STEER OPTION SEE FOOTNOTE 5 SEE FOOTNOTE 4 & 5 SEE FOOTNOTE 4 SEE FOOTNOTE 4 SEE FOOTNOTE 4

FOOTNOTES

1. THIS IS TO BE USED FOR MECHANICAL (POWERSHIFT ONLY) 2. USE LOCTITE 401 ADHESIVE 3. USE LOCTITE 242 OR EQUIVALENT 4. USE WITH REAR STEER SYSTEM. 5. UNITS WITHOUT REAR STEER, FRAME TILT, OR REEL WINDER USE PLUGS 362-823.

NOTE:

05

ID0024294

106

FUEL TANK

35

41

6 RETURN

36

37

17

11

10

18

SUCTION

14 15 5 4

7 6 12 2

6

12 2

19 20

16

31 3 22

2 21

30

23

1

13

30

29

40

33

28

9

25 24 39 38

8

27 30

13

32 34 26

05

ID0024290

107

FUEL TANK REF PART NO. NUMBER

QTY

1. 194-164 1 2. 110-563 3 3. 156-268 1 194-505 1 4. 364-567 1 153-760 1 153-594 2 153-607 1 107-781 6 153-761 1 153-606 1 5. 156-269 2 6. 110-528 4 7. 116-108 AR 8. 106-387 2 9. 319-452 1 10. 116-108 AR 11. 214-650 1 165-704 1 12. 116-325 2 13. 107-287 4 14. 156-108 1 15. 110-217 1 16. 116-322 AR 17. 111-021 1 18. 105-818 2 19. 110-411 1 20. 322-289 1 21. 118-096 AR 22. 118-096 AR 23. 114-002 1

DESCRIPTION

FUEL TANK SPRING CLAMP (3/8") FUEL STRAINER (04H) FUEL PICKUP (04H) FILL NECK CAP GASKET, FILL NECK CAP FLANGE GASKET HEX SCREW (#10-24 X 5/8") FLANGE STRAINER BASKET S/O COUPLER (04H-05H90) SNAP-ON CLAMP (.531" TO .593") BULK HOSE (5/16", SOLD PER 1") FLG LOCKNUT (M10-1.50) CONNECTOR PLATE BULK HOSE (5/16", SOLD PER 1") FUEL SENDER GASKET GROMMET (.362") CLIP NUT (M10-1.50) S/O COUPLER (08N-08H90) WORM CLAMP (7/16" TO 1") BULK HOSE (1/2",SOLD PER 1") BREATHER CAP (TANK) BOLT (1/4-NC X 1-1/2") BOLT-ON CLAMP (3/4", SET) BACKUP (BOLT-ON) BULK FUEL TUBING (1/4", PER FT) BULK FUEL TUBING (1/4", PER FT) PLUG (06N, SOC)

REMARKS

BEGIN WITH S/N ORIENT PADLOCK LUGS AWAY FROM STAIRWELL. LOCKABLE

USE 1@ 55"

USE 1@ 46"

USE 1@ 48"

USE 1@ 24" USE 1@ 20"

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0024290

108

FUEL TANK REF PART NO. NUMBER

QTY

24. 105-829 6 25. 106-386 2 26. 320-591 1 27. 305-656 28. 117-425 AR 117-463 AR 29. 313-820 1 30. 107-001 8 31. 117-442 AR 32. 106-198 2 33. 313-909 1 34. 105-831 2 35. 110-333 1 36. 105-033 1 37. 117-671 1 38. 107-778 2 39. 107-629 2 40. 105-003 1 41. 105-1190 5

DESCRIPTION

FLG LK BOLT (1/2-NC X 1") FLG LOCKNUT (M8-1.25) TANK CRADLE LEFT OUTSIDE FENDER LINER PAD (.12" THK) LINER PAD (.25" THK) TREAD, FUEL FLG LK SCREW (M10-1.50 X 25mm) SUPPORT MAT FLG LOCKNUT (1/2-NC, GD8) LEFT AIR DEFLECTOR FLG LK BOLT (1/2-NC X 1-1/2") BOLT-ON CLAMP (1") BOLT (5/16-NC X 2") ABRASION SLEEVE (1" X 12") SCREW (M8-1.25 X 30mm, BUT SOC) WASHER (M8) FLG LOCKNUT (5/16-NC) BOLT (#10-24 X 1-1/4")

REMARKS

SEE FOOTNOTE 2

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. LAYER SUPPORT MAT BETWEEN LEDGE OF TANK AND UNDERSIDE OF STEP UNTIL FIRM PRESSURE IS REQUIRED TO ALIGN SLOTS AND INSERT SCREWS 2. ARRANGE LINER PADS IN AN EVEN PATTERN ON INTERIOR SURFACES OF THE SIDE PLATES, BOTTOM PLATE AND PLATE. USE .12 THICK AND .25 THICK TO PROVIDE A SNUG FIT FOR THE TANK. APPLY AND ADJUST THE LINER PADS UNTIL THE LEAST MOVEMENT POSSIBLE HAS BEED ACCOMPLISHED. ONCE FILLED THE TANK SHOULD NOT SHIFT. NOTE:

05

ID0024290

109

110

HYDRAULIC RESERVOIR

7 29

21 21

29

15

13 12 14

18

17

2

31

1

4

16 30 6 11

28

23

27

10

24 34 26

9

33 33 34

25

36

26

21

8 21

22 20

24

35

21

22

35

19

22

32

3

29

29

21

5

29 35

04

ID0136836

111

HYDRAULIC RESERVOIR REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

1 FILL NECK 6 FLG SCREW (#10-24 X .5") 1 BATTERY COVER 1 SUPPORT MAT 1 BATTERY COVER 1 HYDRAULIC RESERVOIR (75) 1 HYDRAULIC TANK STEP 1 CRADLE WELDMENT 1 DRAIN PLUG (1-UNF, .375 ORF) 1 O-RING (211 D70) 1 TEMPERATURE SWITCH(1/4NPT,MALE) 1 BACKUP (BOLT-ON) 1 BOLT-ON CLAMP (3/4", SET) 2 BOLT (1/4-NC X 1-1/2") 1 BREATHER CAP (TANK) 1 BULK HOSE (1/2", SOLD PER 1") 1 WORM CLAMP (7/16" TO 1") 1 S/O COUPLER (08N-08H90) 6 FLG LK BOLT (1/2-NC X 1") 2 FLG LOCKNUT (1/2-NC) 9 FLG LOCKNUT (M10-1.50) 5 CLIP NUT (M10-1.50) 1 SIGHT GLASS 2 LOCKNUT (M8-1.25, NLK) AR LINER PAD (.12" THK) 2 WASHER (1/4") 1 RIGHT AIR DEFLECTOR 1 REDUCER (24S-20SF) 8 FLG SCREW (M10-1.50 X 25MM) 1 BOLT (5/16-NC X 2") 1 BOLT-ON CLAMP (1") 2 FLG LK BOLT (1/2-NC X 1-1/2") 2 FLG LK SCREW (M10-1.50 X 20MM) 2 SCREW (M8-1.25 X 25MM,BUT SOC) 4 FLG LK SCREW (M10-1.50 X 25MM) 1 CONNECTOR PLATE

364-632 105-214 320-657 117-442 334-003 364-633 307-311 320-591 157-466 500-749 214-854 322-289 110-411 105-818 111-021 116-322 110-217 156-108 105-829 105-833 106-387 106-558 121-040 107-096 117-425 105-095 313-908 514-446 106-724 105-033 110-333 105-831 106-382 107-334 107-001 319-452

DESCRIPTION

REMARKS

SEE F/N 3 & 5.

SEE F/N 5

REFER TO NOTES BELOW.

"USE AS REQUIRED".

SEE F/N 4

REFER TO REF. #23.

USE 1 @ 48"

SEE F/N 1.

ALSO USE AS NEEDED 117-463 (.25' THK PAD)

NOT SHOWN:

FOOTNOTES:

1. ARRANGE LINER PADS IN AN EVEN PATTERN ON THE INTERIOR SURFACES OF THE SIDE PLATES AND KICK PLATE. USE .12" THK AND .25" THK TO PROVIDE A SNUG FIT FOR THE TANK. APPLY AND ADJUST THE LINER PADS UNTIL THE LEAST MOVEMENT POSSIBLE HAS BEEN OPTAINED. THE TANK SHOULD NOT SHIFT WHEN FILLED. 2. REFER TO PAGE "BATTERY HOLD DOWN" FOR BATTERY INSTALLATION DETAILS. 3. ORIENT PADLOCK LUGS AWAY FROM STAIRWELL. 4. MORE THAN ONE SUPPORT MAT (117-442) MIGHT BE REQUIRED WITH DUAL BATTERY INSTALLATION, OR, POSSIBLY TO OBTAIN A SECURE FIT FOR SINGLE BATTERY INSTALLATION. 5. SCREWS (105-214) REPLACE SCREWS (107-781) THAT COME WITH FILL NECK FLANGE.

NOTE:

REF #1, FILL NECK (364-632) INCLUDES LOCKABLE CAP 153-760, FLG GASKET 153-607, & STRAINER BASKET 153-606. REFER TO F/N 5 .

04

ID0136836

112

SEAT PLATFORM

RT70H - RT75H - RT95H - RT95M

14

27

15

16

26

29

19 28

12

2

1

3

14

1

27

21 4

7 8 24 30

6

12

5 20

15

16

26

29 12

28 11

17

25

13

18 10 9 23 22

04

ID0024280

113

SEAT PLATFORM

RT70H - RT75H - RT95H - RT95M REF PART NO. NUMBER

1.

QTY

117-924 1 117-925 117-429 1 115-445 115-428 184-252 2 106-333 2 106-031 2 115-430 2 105-267 4 309-431 1 324-563 1 314-594 1 105-273 2 305-649 1 107-312 16 106-574 8 117-314 2 309-294 2 106-159 4 105-876 2 105-089 4 319-158 1 313-411 1 316-479 1 106-391 2 107-001 8 106-387 2 215-1107 1 310-801 1 313-707 2 107-702 2 107-698 2 110-383 2 106-168 2

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

DESCRIPTION

SEAT BELT SET W/5.75" TONGUE SEAT BELT TONGUE (5.75") SEAT REPLACEMENT SEAT ADJUSTABLE TRACK BUSHING (.562" X 1" X .590") SCREW (M12-1.75 X 40mm, 8.8) LOCKNUT (M12-1.75, NLK) SEAT BELT TETHER CUP WASHER (5/16") RIGHT SEAT CONSOLE RIGHT SEAT CONSOLE SEAT BASE SCREW (M12-1.75 X 30mm) LEFT SEAT CONSOLE SCREW (M6-1.00 X 25mm, BUT SOC) CLIP NUT (M6-1.00) ARMREST LOWER ARMREST BRACKET FLG SCREW (1/4-NC X 3/4") SCREW (M10-1.50 X 35mm) LOCKNUT (5/16-NC) Z-GATE Y-GATE PLOW GATE WASHER (M12) FLG LK SCREW (M10-1.50 X 25mm) FLG LOCKNUT (M10-1.50) SEAT SWITCH BLANK UPPER ARMREST BRACKET CARRIAGE BOLT (3/8-NC x 3/4") DOWEL PIN (.375 X .500) KNOB (3/8-NC, BLACK) FLG LK BOLT (1/4-NC X 3/4")

REMARKS

SEE FOOTNOTE 2 USE ON HYDROSTATS WITH CRUISE CONTROL UNITS ONLY

SEE FOOTNOTE 2 USED WITH COMBO ATTACHMENT USED WITH PLOW ATTACHMENT

USED ON MECHANICAL UNITS ONLY

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1.

2.

USE LOCTITE 242 OR EQUIVALENT. NOT USED ON HYDROSTAT UNITS WITH CRUISE CONTROL OPTION

NOTE:

04

ID0024280

114

SEAT SWIVEL AND BASE 1 20

2

21 19 3 4

16 17

10 15

13

14 18

12 9 5

6 7

22

8 11

7 8

13

ID0034153

115

SEAT SWIVEL AND BASE REF PART NO. NUMBER

1 2 3 4 5 6

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

QTY

107-528 1 106-522 1 106-385 1 308-895 1 110-178 2 306-844 1 322-986 1 324-729 1 300-8537 1 106-992 9 107-135 13 117-816 1 179-382 1 115-662 1 110-383 1 308-879 1 106-559 1 117-301 1 107-582 1 115-645 1 106-121 1 106-986 1 107-606 1 105-095 1 300-8446 1

DESCRIPTION

PN10 SLOTTED NUT WASHER (2-1/16") FLG LOCKNUT (M6-1.00) LEVER PLUG (7/8") SEAT BASE SEAT BASE SEAT BASE SEAT BASE FLG LK SCREW (M8-1.25 X 25mm) CLIP NUT (M8-1.25) COMPRESSION SPRING SHIM (.020) GROMMET EDGE (3/16" X 12.7") KNOB (3/8-NC, BLACK) SWIVEL SCREW (M12-1.75 X 25mm) SWIVEL DISK (7" UHMW) SHLD BOLT (3/8" X 1/4", 5/16-NC) COMPRESSION SPRING STUD BOLT (3/8-NC X 1-1/2") FLG LK SCREW (M6-1.00 X 12mm) TANG LOCK WASHER (2") WASHER (1/4") ACCESS PANEL

REMARKS

SEE FOOTNOTE 2

FOR TIER 2 RT90 & RT115 FOR HT115 SEE FOOTNOTE 4 FOR INSTR. & BEG. S/N; FOOTNOTE 5 SEE FOOTNOTE 1

SEE FOOTNOTE 3 SEE FOOTNOTE 1

SEE FOOTNOTE 4 FOR INSTR. & BEG. S/N; FOOTNOTE 5

NOT SHOWN:

FOOTNOTES:

1.

2.

3.

4.

5.

USE LOCTITE 242 OR EQUIVALENT TORQUE SPANNER NUT TO PREVENT ROTATION, THEN REVERSE DIRECTION AND LOOSEN 1/8 OF A TURN. NO LUBRICANT ON ITEM #15 SEAT BASE 300-8537, ACCESS PANEL 300-8446 MUST BE USED TOGETHER. BEGINS WITH SERIAL NUMBERS; RT95ME90000274 RT95HJ90000351 RT115T3T90000125.

USE 2X 106-264 FOR RETAINING 300-8446 TO 300-8537 IF WELDNUTS ARE PRESENT. BEGINS WITH SERIAL NUMBERS; RT95HP90000380 RT95ME90000291 R15T3L90000135.

NOTE:

13

ID0034153

116

BATTERY HOLD DOWN 20

22

21

19 2 17

14 10

16

13 15 1 7

8

9

12

6

5

3

18

11 4

04

ID0024295

117

BATTERY HOLD DOWN REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

1 FLG LOCKNUT (3/8-NC) 2 FLG LK SCREW (M10-1.50 X 25MM) 2 WASHER (M10) 1 CARRIAGE BOLT (3/8-NC X 2") 1 BAT CABLE (2 GA X 8", RED) 1 BAT CABLE (2 GA X 8", BLK) 1 BATTERY 1 GROMMET (1-1/2") 1 BATTERY HOLD DOWN 1 BATTERY HOLD DOWN 1 HYDRAULIC TANK STEP 1 BAT CABLE (2/0 X 50", RED) 1 J-HOOK 1 FLG LOCKNUT (1/4-NC) AR RUBBER EDGE TRIM 1/8" (FT) 1 HOLD DOWN 2 FLG LOCKNUT (M10-1.50) 1 BAT CABLE (2/0 GA X 65", BLK) 1 BK/AMI 125 AMP FUSE 1 MODIFIED FUSE PANNEL ASSEMBLY 2 NUT, LOCK, #6-32, NYLON INSERT 2 SCREW (#6-32 X 1/2" PLPS SS)

105-814 107-001 106-390 108-067 215-349 215-350 215-244 115-320 107-554 322-951 307-311 213-255 179-799 105-832 116-789 320-112 106-387 215-338 211-305 363-714 107-859 106-367

DESCRIPTION

REMARKS

NOT SHOWN:

215-375 215-309

1 1

BAT CABLE 1/0 GA X 24", BLK) BAT CABLE (4 GA X 20", BLK)

FOOTNOTES:

NOTE:

04

ID0024295

118

4 POST ROPS

BEGINS WITH S/N 5W0527 HYDROSTAT UNITS BEGINS WITH S/N 5Y0468 POWERSHIFT UNITS

11

8

1

5 3

9

9

4 10

7 2

6 05

ID0023950

119

4 POST ROPS

BEGINS WITH S/N 5W0527 HYDROSTAT UNITS BEGINS WITH S/N 5Y0468 POWERSHIFT UNITS REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11

1 ANGUS-PALM ROPS 4 SCREW (3/4-NC X 5", GD5) SPEC. 1 BULK EDGE (1/8", SOLD PER FT) 8 SHOCK MOUNT 8 NUT (3/4-NC) SPECIAL 4 SCREW(3/4-NCX4-1/2",GD5)SPEC. 4 ISOLATOR IRON 3 POP RIVET (3/16" X .664") 3 BULK EDGE (3/16", SOLD PER FT) 1 CHECK GAGE 1 MANUAL COMPARTMENT

301-1473 107-923 116-421 117-973 107-924 107-922 320-240 110-348 117-344 320-745 250-063

DESCRIPTION

REMARKS

REPLACES 320-250 4 POST ROPS, SEE NOT SHOWN FOR SERVICE PART SEE FOOTNOTE 1 USE 1 @ 2.5' SEE FOOTNOTE 2 USE 2 @ 1.0', USE 1 @ 3.5'

NOT SHOWN:

500-2428

ROPS HEADLINER

FOOTNOTES:

1. SCREW (107-923) HAS GOLD PLATING TO DISTINGUISH IT FROM SCREW (107-922). PROPER LOCATION IS IMPORTANT FOR PROPER ASSEMBLY OF THE ROPS. TORQUE TO 200 Ft.Lbs, USE LOCTITE 271 OR EQUIVALENT. 2. SCREW (107-922) HAS SILVER PLATING TO DISTINGUISH IT FROM SCREW (107-923). PROPER LOCATION IS IMPORTANT FOR PROPER ASSEMBLY OF THE ROPS. TORQUE TO 200 Ft.Lbs, USE LOCTITE 271 OR EQUIVALENT.

NOTE:

05

ID0023950

120

CAB KIT

RT75, RT95, RT115, RT100 & RT120

15 12

12

46

38 12 36

Low High Park Switch X

G R I

FRONT WIPER MOTOR ELECTRICAL HOOK-UP DETAIL

33

ROPS TUBE 35 41 42 47 48 39 40 49 30

18

25

23 22

19 20

24

30

16 34

.

OPEN E SI NI TOTH D PARTS GE ATE LE DOOR A S OCI WHI I N DAM A S C AB ES ULT AND N FO R DOOR T OI ON CAN OPERA TI POSI

25

4 5D 3 1 6

21

13

17 31 28 26

27 14

57

29

26

25

22

ID0028095

121

CAB KIT

RT75, RT95, RT115, RT100 & RT120 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

QTY

191-179 499-436 1 499-437 1 121-044 1 499-747 499-748 121-045 1 121-046 1 121-047 1 117-829 21 318-374 1 318-358 1 318-359 1 318-375 2 318-376 2 318-377 2 107-786 32 214-897 1 499-441 2 499-438 2 119-003 1 318-360 1 318-361 1 318-362 1 318-363 1 117-825 1 117-854 1 117-821 1 117-855 1 117-856 2 273-279 1 117-824 1 117-857 1 105-085 4 107-787 4 107-788 8 107-789 4 166-450 1 117-823 1 117-858 1 499-440 1 117-828 4 499-439 1 107-245 4

DESCRIPTION

REMARKS

CAB KIT DOOR ASSY (RIGHT) DOOR ASSY (LEFT) SLIDER ASS'Y (REAR) WINDOW FRAME REAR WINDOW SIDE WINDOW (LEFT) SIDE WINDOW (RIGHT) FRONT WINDOW SEAL, PSA DOUBLE D U-CLAMP DOORPOST (LEFT) DOORPOST (RIGHT) BRACKET, LOWER DOOR POST WINDOW RETAINING CLIP PLATE SCREW, (#10-32 X 1-1/2") HEX WIPER MOTOR DOOR STRAP GAS SPRING STRUT SPACER, WIPER MOTOR CAM LATCH COVER (RIGHT) CAM LATCH COVER (LEFT) INNER BRACKET (RIGHT) INNER BRACKET (LEFT) L. LATCH, PADDLE W/KEY R. LATCH, PADDLE W/KEY LEFT ROD, DOOR LINKAGE RIGHT ROD, DOOR LINKAGE ROD, DOOR LINKAGE WARNING TAG LEFT LATCH, ROTARY RIGHT LATCH, ROTARY LOCKNUT (1/4-NC) SCREW (1/4-20 X 1-1/4) TRUS,TORX SCREW (1/4 X 5/8)TRUS, TORX T27 SCREW (#10-24 X 1/2 ") TRUS, TORX STUD, CYLINDER LEFT HANDLE, INSIDE RIGHT HANDLE, INSIDE INSIDE DOOR BEZEL RETAINER, INTERNAL TOOTH DOOR PULL FLG LK BOLT (3/8-NC X 3/4", NLK)

INCL. REF. #'S 1-57

SEE NOT SHOWN FOR REPLACEMENT LATCH. OBSOLETE

COMES WITH SNAP-ON COVER

NOTES:

MOUNTING A CAB ON THE RT70/RT90/RT115 1. A CAB CAN BE MOUNTED DIRECTLY ON RT70M OR RT90M WHEN OLD ROPS HAS NOT BEEN MODIFIED WITH THE NEW ISOLATORS. 2. A CAB CAN NOT BE MOUNTED ON A RT70H, RT90H OR RT115H WHEN AN OLD ROPS HAS BEEN MOFIFIED WITH THE NEW ISOLATORS. 3. A CAB CAN BE MOUNTED ON A RT70H, RT90H OR RT115H WITH A NEW ROPS WITH THE NEW ISOLATORS.

22

ID0028095

122

CAB KIT

RT75, RT95, RT115, RT100 & RT120

50 51 53 4

52

55

5

11

45 40

56

32

9 54

54

54 11 1 44

6 7

22

9 37

3 10

2

8 43

ID0028095

123

CAB KIT

RT75, RT95, RT115, RT100 & RT120 REF PART NO. NUMBER

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

46.

47.

48.

49.

50.

51.

52.

53.

54.

55.

56.

57.

QTY

121-048 1 121-049 1 121-050 1 121-051 1 318-364 1 318-365 1 121-052 1 105-047 4 121-053 1 106-991 8 106-415 8 117-826 1 117-827 1 106-565 8 106-469 8 106-709 8 105-895 4 105-865 1 105-151 2 105-059 2 117-861 2 107-778 2 318-879 1 107-135 2 344-115 1 107-875 6 116-866 AR 110-249 1 118-357 1

DESCRIPTION

REMARKS

SLIDER, (LEFT DOOR) SLIDER, (RIGHT DOOR) GLASS (LOWER DOOR), LEFT GLASS (LOWER DOOR), RIGHT RIGHT DOOR LEFT DOOR WIPER BLADE LOCKNUT (3/8-NC) WIPER ARM FLG LK SCREW (M8-1.25 X 20mm) WASHER (.406") STRIKE BRACKET (RIGHT) STRIKE BRACKET (LEFT) NUTSERT, (M8-1.25) FLG SCREW (M12-1.75 X 30mm) FLG LK NUT (M12-1.75) LOCK WASHER (3/8") BOLT (1/4-NC X 3/4", GD8) LOCKNUT (7/16-NC) WASHER (7/16) STRIKER BOLT SCREW (M8-1.25 X 30mm, BUT SOC) BOTTLE BRACKET CLIP NUT (M8-1.25) WINDSHIELD WASHER TANK WASHER (.400" ID. BRASS) BULK HOSE (3/16", SOLD PER 1") WORM CLAMP (1/4"TO 5/8") EXTENSION SPRING

SEE NOT SHOWN FOR REPLACEMENT LATCH. SEE NOT SHOWN FOR REPLACEMENT LATCH.

URETHANE ADHESIVE KEYS (RT TRACTOR CAB) CLIP LEFT SLIDER LATCH REAR RIGHT SLIDER LATCH REAR LEFT SLIDER LATCH RIGHT SLIDER LATCH KNOB KIT, SLIDER WINDOW

10.5 FL. OZ. TUBES REPLACEMENT KEYS RETAINS STRUT 499-438 ONTO STUD 166-450 USED ON 121-044 SLIDER (REAR) USED ON 121-044 SLIDER (REAR) USED ON 121-048 SLIDER (LT DOOR) USED ON 121-049 SLIDER (RT DOOR)

USE 1 @ 150"

NOT SHOWN:

256-669 2 105-1305 1 115-1014 2 500-2067 500-2068 500-2069 500-2070 500-2450

NOTES:

22

ID0028095

124

CAB HEATER ASS'Y RT95 TIER2

TO

PR ES

SU R

3

ET

AN

7

K

11 15

TO

39 6

K AN ET

16

38 2

10

31 9

20 R SU ES PR

36 19

13 11 12 30

3

18 17

16 23

26

24

40 25

8

1

11

21

29 34

28

5 37 22 21

32

27

33

35

14

11 4

05

11

ID0024284

125

CAB HEATER ASS'Y RT95 TIER2 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

QTY

191-377 191-376 499-802 1 194-439 1 499-837 1 116-044 AR 499-705 1 116-044 AR 115-106 1 499-833 4 117-344 AR 514-085 1 156-260 1 110-217 8 155-164 1 110-249 1 117-622 1 514-159 1 107-358 6 107-597 4 107-580 4 107-852 16 117-397 1 106-992 4 107-135 106-640 106-388 106-574 110-030 1 117-396 1 106-386 4 117-265 1

DESCRIPTION

A/C HEATER KIT HEATER KIT MODEL EE320, HVAC, 12V HEATER CONTROL PANEL, FAN-AC-HT BULK HOSE (5/8" , SOLD PER 1") HEATER VALVE BULK HOSE (5/8" , SOLD PER 1") REDUCER (06N-04NF) LOUVER MOUNT, 3.1" HOLE BULK EDGE (3/16", SOLD PER FT) REDUCER (08N-06NF) STREET ELBOW (06N-06NF90) WORM CLAMP (7/16"TO 1") S/O COUPLER (04N-05H90) WORM CLAMP (1/4"TO 5/8") ABRASION SLEEVE (1.25" X 20") S/O TEE (10H) WELLNUT (M4-0.7 X 12.67mm LG) WASHER (M4) SCREW (M4-0.70 X 16mm, BUT SOC) SCREW (#8 X 5/8" CSK PLPS) ABRASION SLEEVE (1.25" X 35") FLG LK SCREW (M8-1.25 X 25mm) CLIP NUT (M8-1.25) SCREW (M6-1.00 X 20mm, BUT SOC) WASHER (M6) CLIP NUT (M6-1.00) CABLE TIE (1/16" TO 4") ABRASION SLEEVE (1.25" X 28") FLG LOCKNUT (M8-1.25) ABRASION SLEEVE (1.75" X 50")

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 2 USE 2 @ 90" USE 1 @ 22"

USE 1 @ 16"

NOT SHOWN:

05

ID0024284

126

CAB HEATER ASS'Y RT95 TIER2 REF PART NO. NUMBER

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

QTY

155-112 1 155-017 1 108-113 2 318-811 1 322-986 115-662 1 362-1233 1 105-814 4 322-871 1 107-393 2 157-333 1

DESCRIPTION

S/O COUPLER (06N-10H) SERVICE TEE (06N-06NF-06NF) SCREW (#6-19 X 1-1/4" PLASTIC) VALVE BRACKET SEAT BASE GROMMET EDGE (3/16" X 12.7") REAR PANEL W/ AC DUCT FLG LOCKNUT (3/8-NC) TDM COVER SCREW (M4-0.70 X 16mm, BX) HOLE PLUG (.750")

REMARKS

SCREWS ONTO STUD BOLTS ON BOTTOM OF REF #1 (499-802)

NOT SHOWN:

213-174 499-704 499-829 499-830 499-831 499-834 499-835 499-842 499-843 499-844 255-008 499-707 499-708 499-709 499-838 499-839 499-840 194-289 213-041 217-826 362-823

05

SWITCH, THERMOSTAT BLOWER MOTOR COIL, EVAP COIL, HEAT VALVE, EXP BLOCK WIRE HARNESS RECIRCULATION AIR FILTER HOSE, DRAIN FTG, DRAIN CONDENSATE VALVE REFRIGERANT (30 LB. BOTTLE) BLOWER SWITCH A/C SWITCH WATER VALVE CONTROL BRACKET, CONTROL PANEL DECAL CONTROLS KNOB, POINTER PUSH ON A/C HEATER KIT A/C HARNESS MINI RELAY (SPDT) COVER, FITS IN SLOT ON REAR PANEL

ID0024284

127

128

129

130

131

132

NOTES:

ID0134963

133

CONTROL COMPONENTS

ID0135065

134

BFB BLADE CONTROLS 1 2 3

10

13

11 25

4

22 23 21 24 8 20 19

5 6 7

11 8 13 12 13 15

8 4

16 11

9 10

13

11 18

12

17 14 16

05

15

ID0235632

135

BFB BLADE CONTROLS REF PART NO. NUMBER

QTY

1 117-345 2 305-728 3 105-263 4 178-421 5 110-330 6 107-312 7 305-727 8 107-770 9 105-387 10 160-540 11 105-152 12 179-884 13 106-076 14 107-790 15 110-082 16 105-508 17 105-878 18 179-885 19 105-085 20 305-724 21 105-284 22 105-087 23 110-565 24 110-281 25 107-582

1 1 2 2 1 4 1 3 1 2 4 2 5 3 4 4 3 1 1 1 1 1 1 1 1

DESCRIPTION

CONTROL HANDLE HANDLE ASSEMBLY BOLT (1/4-NC X 3/4", CSK, SOC) BUSHING DUST BOOT SCREW (M6-1.00 X 25MM, BUT SOC) MOUNT ASSEMBLY LOCKNUT (1/4-NF, NYL INSERT) LOCKNUT (3/4-NF) ROD END NUT (1/4-NF) ROD WASHER (1/4") CLEVIS (1/4-NF-LH) CLEVIS PIN (1/4 X 11/16) COTTER PIN (3/32" X 1") NUT (1/4-NF, LH) ROD (16.62") LOCKNUT (1/4"-NC) LINKAGE PLATE WASHER (3/16") BOLT (1/4-NC X 7/8", SOC) BALL JOINT (1/4-NF) ROD END (1/4-NF, FM) SHLD BOLT(3/8" X 1/4",5/16-NC)

REMARKS

USE LINKAGE ROD 306-767 ON EARLIER MACHINES

USE LINKAGE ROD 107-581 ON EARLIER MACHINES

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0235632

136

GRND SPEED DIRECTION HAND CNTL HYDROSTAT CABLE LOCATION

1

23 POWER SHIFT CABLE LOCATION

22

9

25

14

8

5

24 26 20

7

6

17

3 19

21

4

13 28

2 10

11

28 18 27 17

16 12

K

15

806-228

137

GRND SPEED DIRECTION HAND CNTL REF PART NO. NUMBER

1 110-445 2 319-914 3 107-529 4 116-980 5 196-287 6 331-166 7 106-048 8 106-205 9 110-318 10 105-810 11 110-697 12 309-227 13 107-770 14 105-245 15 107-001 16 107-769 17 105-832 18 310-127 19 105-284 20 110-348 21 115-598 22 106-987 23 117-519 24 315-149 25 106-271 26 316-476 27 106-396 28 106-261

QTY

DESCRIPTION

1 KNOB (3/8-NC, ORANGE) 1 RIGHT CONTROL 1 WASHER UHMW (3/8) 2 SHOCK MOUNT 1 CONTROL CABLE 2 BOLT-ON BACK-UP (.306") 2 LOCKNUT (#10-24) 2 WASHER (.191") 1 BALL JOINT (#10-32, FM) 2 BOLT (#10-24 X 7/8", SOC) 1 BOLT-ON CLAMP (.360") 1 CONTROL LEVER FRAME 1 LOCKNUT (1/4-NF, NYL INSERT) 1 SCREW (M10-1.50 X 25MM) 4 FLG LK SCREW (M10-1.50 X 25MM) 2 JAM NUT (M10-1.50) 4 FLG LOCKNUT (1/4-NC) 1 PIVOT PLATE 2 WASHER (3/16") 2 POP RIVET (3/16" X .664") 1 SPRING DETENT 2 FLG LK SCREW (M6-1.00 X 16MM) 1 CONTROL HANDLE 1 DETENT TIP 2 SCREW (M5-0.80 X 8MM, PLPS) 1 TEMPLATE 1 WASHER (M10, HARDENED) 4 WASHER (.334")

REMARKS

SEE FOOTNOTE 3 AND INCLUDES HARDWARE SEE FOOTNOTE 4

SEE FOOTNOTE 2

SEE FOOTNOTE 1

FOOTNOTES

1. USE LOCTITE 242 OR EQUIVALENT 2. TORQUE TO 70 IN.-LBS. 3. IF ORDERING THIS PART FOR MACHINE WITH S/N ___________ OR OLDER, YOU MUST ALSO ORDER LEVER (#319-916) AND REFER TO PARTS PAGE "GRD SPEED DIRECTION FOOT CONTROL", IF THIS UNIT IS EQUIPPED WITH CRUISE CONTROL, PART 319-916 IS NOT NEEDED. 4. 196-287 IS FOR HYDROSTAT TRACTORS. USE 194-196 FOR POWER SHIFT TRACTORS.

NOTE:

K

806-228

138

GROUND SPEED DIRECTION FOOT CONTROL 1

27 28 3

24 38

4

11 9

39

37

5

24

6

41 25

23 34 22

2 20 32

21

7 29 19 4

12

11

18 35

4 8

17

10 16

36 13

31

14

11

26 30

15

2 33

6 22

03

ID0151542

139

GROUND SPEED DIRECTION FOOT CONTROL REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

309-943 106-387 310-411 179-293 183-221 110-774 309-707 308-441 309-939 110-318 107-770 106-654 106-685 105-188 110-333 106-628 370-036 106-620 178-582 115-650 115-482 196-359 107-135 106-992 331-595 107-604 319-365 106-175 309-705 319-916 105-920 181-566 365-240 196-287 506-021 106-386 105-472 105-065 107-002 106-142 106-387

QTY

1 3 1 4 1 2 1 1 1 1 3 2 2 1 1 1 1 1 1 1 1 1 4 6 1 1 1 2 1 1 1 1 2 1 1 2 1 1

DESCRIPTION

PEDAL FLG LOCKNUT (M10-1.5) CLAMP BRONZE BUSHING PIN BALL JOINT (1/4-NF) CABLE BRACKET CONTROL ARM CABLE BRACKET BALL JOINT (#10-32,FM) LOCKNUT (1/4-NF, NYL INSERT) FLG LK SCREW (M10-1.50 X 16mm) LOCKNUT (M12-1.75, PRV TRQ,10.9) LOCKNUT (7/16-NF) BOLT-ON CLAMP (1") SCREW (M10-1.50 X 60mm) SPACER SCREW (M12-1.75 X 150mm) SPACER TORSION SPRING GRIP RING (.500") CONTROL CABLE CLIP NUT (M8-1.25) FLG LK SCREW (M8-1.25 X 25mm) PEDAL MOUNT ROD END (7/16-NF) PROTECTIVE BAR NUT (M10-1.50) LEVER LEVER JAM NUT (7/16-NF) SLEEVE (1.5") CONTROL LEVER CONTROL CABLE NUT (#10-32) FLG LOCKNUT (M8-1.25) BOLT (1/2-NC X 5") LOCKNUT (1/2-NC) FLG LK SCREW (M10-1.50 X 30mm) SCREW (M10-1.50 X 65mm) FLG LOCKNUT (M10-1.5)

REMARKS

SEE FOOTNOTE 1

FOOTNOTES:

1. IF ORDERING THIS PART FOR A MACHINE WITH SERIAL NUMBER__________________ OR OLDER, YOU MUST ALS0 ORDER NUMBER 319-914 RIGHT CONTROL LEVER, AND REFER TO PARTS PAGE "GRD SPEED DIRECTION HAND CONTROL".

NOTE:

SEE INSTALLATION INSTRUCTIONS

03

ID0151542

140

HYDROSTATIC SHIFT FRONT OF TRACTOR ORIENTATION OF 118-087 1

4

2.75

23

2.75

24

4 3 5 25 2 13

29 6

10

11

17 8

5 3 4

15 9 15

12

4

9 7

18 10 19

14

21

22

6 9

27

16 7

20

8 5

26 4 28

05

ID0092687

141

HYDROSTATIC SHIFT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

QTY

110-375 1 307-718 1 125-488 2 106-992 12 106-386 8 106-397 2 125-609 2 107-004 2 105-244 AR 106-354 2 106-447 1 107-573 1 110-290 1 107-574 1 105-506 2 117-019 1 306-762 1 105-525 1 306-666 1 307-568 1 307-567 1 130-304 1 307-580 1 307-585 1 118-074 1 118-087 1 106-266 2 307-563 107-002 2 110-217 1

DESCRIPTION

KNOB (1/2-NC, YELLOW) SHIFT ARM FLANGE BUSHING (.875") FLG LK SCREW (M8-1.25 X 25mm) FLG LOCKNUT (M8-1.25) WASHER (M12, HARDENED) BRONZE BUSHING (.750", FLG) FLG LK SCREW (M12-1.75 X 45mm) WASHER (1/2") FLANGE NUT (M12-1.75) JAM NUT (1/2-NF) JAM NUT (1/2-NF, LH) ROD END (1/2-NF, FM) ROD END (1/2-NF, FM, LH) COTTER PIN (3/16" X 1-1/2") COMPRESSION SPRING SHIFT ROD ROLL PIN (3/16" X 1-1/4") SPRING ROD SPRING MOUNT SHIFT ARM CONNECTOR LINK (#80) BELLOW MOUNT BELLOW DUST SHIELD DUST SHIELD FLG NUT (M10-1.50) SHIFT MOUNT FLG LK SCREW (M10-1.50 X 30mm) WORM CLAMP (7/16" TO 1")

REMARKS

OBSOLETE

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. PLACE WORM CLAMP (110-217) ON SHIFTER TO PREVENT DUST SHIELD (118-087) FROM SLIPPING DOWN.

NOTE:

05

ID0092687

142

HAND THROTTLE

BEGINS WITH S/N 5Y0227

9 17 21 17

8 22

7 11

12 20

15 16

11

19

3 18

7 12

14

2 4 6 4 13

20 10 1

03

5

5 ID0025136

143

HAND THROTTLE

BEGINS WITH S/N 5Y0227 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

QTY

306-619 1 117-593 1 324-666 1 194-539 1 106-850 2 106-987 2 106-353 2 107-744 2 115-604 1 506-021 2 196-058 1 106-205 1 505-114 1 106-640 2 106-574 2 106-018 2 106-991 1 106-386 1 110-373 1 105-095 2 106-138 2 107-465 2 215-1447 1 307-069 307-068 -

DESCRIPTION

CONTROL LEVER KNOB (ORANGE) CONTROL BRACKET CONTROL CABLE LOCKNUT (M5-0.80) FLG LK SCREW (M6-1.00 X 16mm) FLG NUT (M6-1.00) WASHER (M6) COMPRESSION SPRING NUT (#10-32) CABLE SWIVEL (.081") WASHER (.191") THRUST WASHER (.343") SCREW (M6-1.00 X 20mm ,BUT SOC) CLIP NUT (M6-1.00) JAM NUT (3/8-NF) FLG LK SCREW (M8-1.25 X 20MM) FLG LOCKNUT (M8-1.25) BOLT-ON CLAMP (13/16") WASHER (1/4") NUT (M5-0.8.)

SCREW (M5-0.80 X 30MM, SOC) PROXIMITY SWITCH 12MM EUROFAST LEVER BRACKET CABLE BRACKET

REMARKS

USE LOCTITE 242 OR ITS EQUIVILENT

POWERSHIFT ONLY & REFER TO F/N 1

NOT SHOWN:

FOOTNOTES:

1. PROXIMITY SWITCH 215-1447 SUPERCEDED PROXIMITY SWITCH 213-272

NOTE:

03

ID0025136

144

ATTACHMENT CONTROL HANDLE 2 1

33 21

15

34 26

3 25

32 36 26

28

42 27

9 26 35

41

42

39

40

4

23

26 5

41

8

6

31

10

7

11

30

16

18

22

20 29

19

17 38

23 30

9

7

12 6

14

13

37

24

5 10 11

15

ID0036388

145

ATTACHMENT CONTROL HANDLE REF PART NO. NUMBER

QTY

1 117-470 2 309-671 3 107-529 4 116-980 5 196-294 6 331-166 7 106-048 8 105-688 9 110-318 10 105-810 11 110-697 12 309-227 13 215-082 14 107-322 15 117-519 16 106-385 17 308-682 18 106-389 19 106-005 20 215-1455 21 105-245 22 308-901 23 107-770 24 107-001 25 107-769 26 105-832 27 310-127 28 106-987 29 110-348 30 105-284 31 115-598 32 106-271 33 106-205 34 315-149 35 316-476 36 106-396 37 107-277 38 106-709 39 316-851 40 107-193 41 106-538 42 106-261

1 1 1 2 2 4 4 1 2 4 2 1 1 2 1 2 1 1 1 1 1 1 2 4 2 4 1 2 2 6 1 2 2 1 1 1 1 1 1 2 2 4

DESCRIPTION

KNOB (3/8-NC, YELLOW) LEFT CONTROL LEVER WASHER UHMW (3/8) SHOCK MOUNT CONTROL CABLE BOLT-ON BACK-UP (.306") LOCKNUT (#10-24) SCREW (M6-1.00 X 35MM) BALL JOINT (#10-32, FM) BOLT (#10-24 X 7/8", SOC) BOLT-ON CLAMP (.360") CONTROL LEVER FRAME ACTUATOR BRACKET SCREW (M6-1.00X25MM,SOC,12.9) CONTROL HANDLE FLG LOCKNUT (M6-1.00) ATTACHMENT BRACKET WASHER (M8) SCREW (M8-1.25 X 16MM, SOC) PLUNGER SWITCH SCREW (M10-1.50 X 25MM) LEVER EXTENSION LOCKNUT (1/4-NF, NYL INSERT) FLG LK SCREW (M10-1.50 X 25MM) JAM NUT (M10-1.50) FLG LOCKNUT (1/4-NC) PIVOT PLATE FLG LK SCREW (M6-1.00 X 16MM) POP RIVET (3/16" X .664") WASHER (3/16") SPRING DETENT SCREW (M5-0.80 X 8MM, PLPS) WASHER (.191") DETENT TIP TEMPLATE WASHER (M10, HARDENED) SCREW (M12-1.75 X 20MM, SOC) FLG LK NUT (M12-1.75) STOP SCREW (M6-1.00 X 16MM,BUT SOC) LOCKNUT (M6-1.00,PRV TRQ,10.9) WASHER (.334")

REMARKS

INCLUDES JAM NUT SEE FOOTNOTE 4

SEE FOOTNOTE 1 AND INCLUDES HARDWARE

SEE FOOTNOTE 1 AND INCLUDES HARDWARE

SEE FOOTNOTE 3

SEE FOOTNOTE 2

SEE FOOTNOTE 4 SEE FOOTNOTE 4 SEE FOOTNOTE 4 SEE FOOTNOTE 2 SEE FOOTNOTE 4

FOOTNOTES:

1. USED W/COMBO ATTACHMENTS 2. USE LOCTITE 242 OR EQUIVALENT 3. TORQUE TO 70 IN-LBS 4. USE WITH H732, H752, H932, H952

NOTE:

15

ID0036388

146

CRUISE CONTROL

3 2

4

1

5 8 6

7

10 13

11 9 12

06

ID0063502

147

CRUISE CONTROL REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

QTY

110-560 2 110-641 1 217-762 1 110-854 1 165-817 1 306-492 217-892 1 273-449 1 106-048 2 105-815 2 220-645 1 315-142 152-107 1 158-194 157-354 153-866 1 158-039 157-354 217-258 165-728 500-1937 -

DESCRIPTION

POP RIVET (3/16" X 1/2 ", ALUM) KNOB (1/8", BLK) ROCKER SWITCH (SPDT) SWITCH ACTUATOR GUARD SWITCH GASKET REAR PANEL POTENTIOMETER-AUTOCROWD CRUISE CONTROL OVERLAY LOCKNUT (#10-24) BOLT (#10-24 X 1", PAN SLT) GENERALCRUISE CONTROL PEDESTAL TANDEM PUMP (CRUISE CONTROL) ATTACHMENT PUMP GROUND DRIVE PUMP TANDEM PUMP (CRUISE CONTROL) ATTACHMENT PUMP GROUND DRIVE PUMP ELECTRIC DISPLACEMENT CONTROL SERVO GASKET SOLENOID

REMARKS

REFER TO (TILT STEERING) FOR DETAILS

SEE FOOTNOTE 3 RT115/RT95 & SEE FOOTNOTE 1 RT115 RT115/RT95 & SEE FOOTNOTE 2 EDC SEE NOT SHOWN RT75 RT75 EDC

EDC

NOT SHOWN:

217-258 ELECTRIC DISPLACEMENT CONTROL 165-728 SERVO GASKET 500-1849 SOLENOID, EDC, MCV116A3102 SAUER

FOOTNOTES:

1. TANDEM PUMP 152-107 SUPERCEDES PUMP 153-867.

2. ATTACHMENT PUMP 158-194 SUPERCEDES PUMP 158-038.

3. CRUISE CONTROL 220-645 SUPERCEDES CRUISE CONTROL 220-569.

NOTE:

06

ID0063502

148

REAR STEER CONTROL KIT

13

12 15 14

1 3

2 4

7

11 16

5

6

9

8

10 02

ID0142805

149

REAR STEER CONTROL KIT REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 2 1 1 1 1 1 1 1 2 2 2 2 1 1 1

318-366 179-416 125-447 318-367 166-449 217-273 115-598 105-529 179-418 106-120 107-785 107-744 107-193 117-887 105-522 105-161

DESCRIPTION

MOUNT PLATE BOSS BUSHING BOTTOM PLATE SHAFT POSITION POTENTIOMETER SPRING DETENT ROLL PIN (5/16" X 1-1/2") BUSHING SCREW (#10-24 X1-3/4",PAN SLT) SHLD BLT(1/4" X 1-1/4",#10-24) WASHER (M6) SCREW (M6-1.00 X 16MM,BUT SOC) KNOB ROLL PIN (3/16" X 3/4") BOLT (1/4-NC X 3/4", SOC)

REMARKS

SEE FOOTNOTE 1

SEE FOOTNOTE 2 SEE FOOTNOTE 2

SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. P/N 191-221 REAR STEER CONTROL KIT INCLUDES REFERENCE # 1-16 2. USE LOCTITE 242 OR EQUIVALENT

NOTE:

REFER TO INSTALLATION INSTRUCTION 051-319 FOR REAR STEER UPGRADE KIT INFORMATION..

191-251 IS THE REAR STEER UPGRADE KIT AND 259-516 IS THE REAR STEER ALIGNMENT (SPECAIL TOOL) .

REFER TO O-RING CHART (800-301) FOR REPLACEMENT O-RINGS.

02

ID0142805

150

NOTES:

ID0134963

151

HYDRAULICS

ID0135071

152

BACKFILL BLADE HYDRAULICS 27 26

34

TILT LIFT

1

LIFT

28

SWING

24

1 6

33

TILT

4 7

4 41

SWING

5 8

23

7

16

17

SW

33 15 6

39 21

2

37

40 22

35

9 32

25

36

14

ING

3

39 40

19

20

13 38

36

10

8

31

14

T LIF

3

SW ING

13

11

18

30

TIL

29

14

T

12

LIFT

SWING

(24)

TILT

FOOTNOTE 2 REF. 27 FITS HERE REF. 7 FITS HERE

REF. 7 FITS HERE

REF. 6 FITS HERE REF. 6 FITS HERE

09

REF. 28 FITS HERE

ID0091604

153

BACKFILL BLADE HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

QTY

515-714 2 153-968 1 515-310 2 515-075 2 106-327 2 154-261 2 154-374 2 151-057 2 154-293 1 154-278 1 151-070 1 151-202 1 154-342 2 154-252 3 307-416 1 154-229 2 154-355 2 154-921 1 154-929 1 515-221 1 106-386 2 154-316 1 153-967 1 158-033 159-809 117-691 1 115-920 1 514-294 1 154-222 1 110-866 2 110-958 2 105-818 4 110-332 1 105-003 2 110-333 1 117-328 1 117-672 2 117-409 1 153-973 1 154-344 2 154-326 2 116-259 AR

DESCRIPTION

REMARKS

HOSE (06OFX90S-82"-3000) HOSE (04OFX90S-82"-5000) HOSE (04OFX45-22"-5000) HOSE (04OFX90S-82"-3000) SCREW (M8-1.25 X 30mm) CONNECTOR (04O-08S) CONNECTOR (04O-08S, ORF) CYL (2" X 1.25" X 8.0") BRANCH TEE (04S-04O-04O) CONNECTOR (04S-04O) CYL (3" X 1.75" X 8") CYL (2" X 1" X 3.38") CONNECTOR (06S-06O90) CONNECTOR (04S-04O90) BK BRACKET BK CONNECTOR (06O-06O90BK) BK CONNECTOR (04O-04O90BK) HOSE (04OFX-54"-3000-AR) HOSE (06OFX90-19"-3000) HOSE (06OFX90S-28"-3000) FLG LOCKNUT (M8-1.25) RUN TEE (04S-04O-04O) HOSE (O4OFX90S-90"-5000) HYD. CONTROL VALVE (3-SPOOL) HYD. CONTROL VALVE (3-SPOOL) ABRASION SLEEVE (1.25" X 68") ABRASION SLEEVE (2.38" X 70") CONNECTOR (08S-060, ORF) CONNECTOR (06O-08S) CLAMP SET (1/2") BACKUP PLATE BOLT (1/4-NC X 1-1/2") BOLT-ON CLAMP (1-5/8") FLG LOCKNUT (5/16-NC) BOLT-ON CLAMP (1") ABRASION SLEEVE (1.00" X 18") ABRASION SLEEVE (1.00" X 20") ABRASION SLEEVE (1.00" X 28") HOSE (040FX45-54"-3000 AR) UN RUN TEE (06OFX-06O-06O) CAP (06OF) BULK EDGE (1/2", SOLD PER FT)

LIFT SWING SWING TILT

SEE FOOTNOTE 1

SEE FOOTNOTE 1 SEE FOOTNOTE 1

TILT LIFT LIFT

SWING ENDS WITH S/N________. OBSOLETE BEGINS WITH S/N________. USE FLOAT KIT 500-2020.

SEE FOOTNOTE 2

SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

TILT

USE 1 @ 20" & SEE FOOTNOTE 4

FOOTNOTES:

1.

2.

3.

4.

REFER TO PARTS PAGE "BACKFILL BLADE ASSEMBLY" FOR CYLINDER INSTALLATION HARDWARE. CLAMP SET (110-866) BOLTS ONTO WELD PLATE ON BFB LIFT ARM. #110-333, 105-003 & 110-332 ATTACH TO STUD BOLTS ON FRAME PLATES. USE EDGING ON FRAME WHERE HOSE'S PASS THRU.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

09

ID0091604

154

BACKFILL BLADE VALVE RT75/RT95

TO REAR STEER / FRAME TILT VALVE REFER TO REAR STEER HYD.

9

8

2

1

3

2 5 7 6

4 12 11

10

03

SEE FOOTNOTE 1

NOTE: FOR HYDROSTAT UNITS REFER TO AUXILIARY HYD. - HYDROSTAT & FOR POWER SHIFT UNITS REFER AUXILIARY HYD. - POWERSHIFT

ID0153409

155

BACKFILL BLADE VALVE RT75/RT95 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

149-851 154-298 149-850 154-301 157-322 105-292 106-386 158-033 159-809 153-907 154-362 116-636 157-917

QTY

1 2 1 1 1 3 3 1 1 1 -

DESCRIPTION

HYD LINE (-10) CONNECTOR (10S-10O90) HYD LINE (-10) CONNECTOR (10S-10O) HYD LINE (-10) SCREW (M8-1.25 X 75mm) FLG LOCKNUT (M8-1.25) HYD CONTROL VALVE (3-SPOOL) HYD CONTROL VALVE (3-SPOOL) HOSE (10OFX45-16"-3000) S/O COUPLER (10S-12H90) BULK HOSE (3/4", SOLD PER 1') PRIORITY VALVE

REMARKS

ENDS WITH S/N_________, SEE FOOTNOTE 1 BEGINS WITH S/N________.

USE 1 @ 25"

FOOTNOTES

1.

FOR BFB VALVE RETURN HOSE'S REFER TO PAGE "PUMP DRIVE HYDRAULICS" FOR HYDROSTATICS OR PAGE "GROUND DRIVE MOTOR HYDRAULICS" FOR POWERSHIFTS.

NOTE

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

03

ID0153409

156

PUMP DRIVE HYDRAULICS

38 2

TO ATTACHMENT VALVE RETURN

31

30 1

(B)

4

37

7

4

30 21

(A) "FWD" SEE FOOTNOTE 1

38 15

7 41 16

9

FLOW

"REV"

17

27

7 20 28

39 39 40

10

29

33

11 5

42 43

39

32

7

12

REFER TO 6 PUMP HYDROSTATIC ASSEMBLY

36

FLOW

13 39

FLOW

19

14 39

FROM REAR ATT. VALVE3

23

34

35

TO HYD TANK ( "Z" PORT)

8

24

TO HYD TANK ( "A" PORT)

26 24

26

31

23

44 31 25

44 22

31 44

18

WITHOUT FRONT ATTACHMENT

03

ID0153413

157

PUMP DRIVE HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

QTY

153-076 1 153-077 1 157-343 1 110-353 2 154-270 1 158-048 111-027 5 155-184 1 154-319 1 514-307 1 153-094 157-358 116-636 AR 154-362 1 153-142 1 116-460 AR 154-278 1 116-636 AR 149-821 1 154-251 1 116-636 AR 116-460 AR 157-244 1 110-333 2 105-003 2 117-764 1 117-392 2 115-687 AR 307-535 1 149-820 149-058 154-324 5 306-459 154-325 1 155-466 1 514-274 1 116-460 AR 316-822 1 153-956 2 111-011 5 155-224 155-198 149-819 154-230 153-984 3

DESCRIPTION

HOSE (12OFX90S-28"-5000) HOSE (12OFX90S-32"-5000) HOSE (10OFX90S-120"-3000) WORM CLAMP (3/4" TO 1-1/2") CONNECTOR (12S-12O90) TANDEM PUMP T-BOLT CLAMP (1.25"-1.50") PLUG (16S) BK RUN TEE (10O) S/O TEE (12S-12H-12H90) HYD MOTOR - GRD DRIVE HYD MOTOR - GRD DRIVE BULK HOSE (3/4", SOLD PER 1') S/O COUPLER (10S-12H90) S/O COUPLER (20S-16H90) BULK HOSE (1", SOLD PER 1') CONNECTOR (04S-04O) BULK HOSE (3/4", SOLD PER 1') HYD. LINE (-10) CONNECTOR (12S-12O45) BULK HOSE (3/4", SOLD PER 1') BULK HOSE (1", SOLD PER 1') HOSE (10OFX45-68"-3000) BOLT-ON CLAMP (1") FLG LOCKNUT (5/16-NC) ABRASION SLEEVE (1.59" X 90") ABRASION SLEEVE (1.25" X 60") ABRASION SLEEVE (SOLD PER FOOT) RETURN MANIFOLD S/O COUPLER (16S-16H90-16H45, XL) RUN TEE (16S-12O-06SF-06SF-06SF) CAP (10OF) RADIATOR/OIL COOLER UN BR TEE (10OFX-10O-10O) HOSE (10OFX90-74"-2750) CONNECTOR (08S-10O90) BULK HOSE (1", SOLD PER 1') RETURN BRACKET HOSE (10OFX90-50"-3000) WORM CLAMP (1" TO 1-3/4") S/O BR TEE (12S-12H-16H90) S/O COUPLER (12S-12H90-06SF) S/O COUPLER (16S-16H-16H45) BRANCH TEE (06S-04O-04O) BK RUN TEE (10O-10O-10OL)

REMARKS

REVERSE FORWARD

REFER TO "GROUND DRIVE TRANS MOUNT" PAGE USE 1 @ 25"

USE 1 @ 26" SEE FOOTNOTE 1 USE 1 @ 25"

USE 1 @ 12" USE 1 @ 20" SEE FOOTNOTE 2 SEE FOOTNOTE 2

USE 1 @ 12"

&

SEE FOOTNOTE 3

USE 1 @ 26" SEE FOOTNOTE 4

FOOTNOTES

1.

2.

3.

4.

FOR DESTINATION OF 154-278 (REF #16) REFER TO PARTS PAGE "MOTOR SHIFT/DIFF LOCK HYDRAULICS" REF #6. #110-333 & #105-003 ATTACH TO STUD BOLTS ON LEFT FRAME PLATE. ABRASION SLEEVE (REF #27) IS USED TO WRAP HOSE (REF #21) AS IT WRAPS AROUND PUMP. RETURN BRACKET (316-822) IS ATTACHED USING CURRENT HARDWARE ON TRANSMISSION MOUNT.

NOTE

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

03

ID0153413

158

PUMP DRIVE HYDRAULICS HYDROSTATIC RT75H BEGINS WITH S/N 5X0465

38 2

TO ATTACHMENT VALVE RETURN

31

30 1

(B)

4

37

7

4

30 21

(A) "FWD" SEE FOOTNOTE 1

38 15

7

7 20

41

28

39 39 16

9

FLOW

"REV"

17

27

40

10

29

33

11 5

42 43

39

32

7

12

45

36

FLOW

13 39

FLOW

19

REFER TO 6 PUMP HYDROSTATIC ASSEMBLY

14 39 TO HYD TANK ( "A" PORT) TO HYD TANK ( "Z" PORT)

FROM REAR ATT. VALVE

34

35

3

23

8

24 26 24

26

31

23

44 31 25

44 22

31 44

18

WITHOUT FRONT ATTACHMENT

05

ID0153719

159

PUMP DRIVE HYDRAULICS HYDROSTATIC RT75H BEGINS WITH S/N 5X0465 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

QTY

153-076 1 153-077 1 157-343 1 110-353 2 154-270 1 158-048 111-027 5 155-184 1 154-319 1 514-307 1 153-094 157-358 116-636 AR 154-362 1 153-142 1 116-460 AR 154-278 1 116-636 AR 149-821 1 154-251 1 116-636 AR 116-460 AR 157-244 1 110-333 2 105-003 2 117-764 1 117-392 2 115-687 AR 307-535 1 149-820 149-058 154-324 5 306-459 154-325 1 155-466 1 514-274 1 116-460 AR 316-822 1 153-956 2 111-011 5 155-224 155-198 149-819 154-230 153-984 3 154-319 1

DESCRIPTION

HOSE (12OFX90S-28"-5000) HOSE (12OFX90S-32"-5000) HOSE (10OFX90S-120"-3000) WORM CLAMP (3/4" TO 1-1/2") CONNECTOR (12S-12O90) TANDEM PUMP T-BOLT CLAMP (1.25"-1.50") PLUG (16S) BK RUN TEE (10O) S/O TEE (12S-12H-12H90) HYD MOTOR - GRD DRIVE HYD MOTOR - GRD DRIVE BULK HOSE (3/4", SOLD PER 1') S/O COUPLER (10S-12H90) S/O COUPLER (20S-16H90) BULK HOSE (1", SOLD PER 1') CONNECTOR (04S-04O) BULK HOSE (3/4", SOLD PER 1') HYD. LINE (-10) CONNECTOR (12S-12O45) BULK HOSE (3/4", SOLD PER 1') BULK HOSE (1", SOLD PER 1') HOSE (10OFX45-68"-3000) BOLT-ON CLAMP (1") FLG LOCKNUT (5/16-NC) ABRASION SLEEVE (1.59" X 90") ABRASION SLEEVE (1.25" X 60") ABRASION SLEEVE (SOLD PER FOOT) RETURN MANIFOLD S/O COUPLER (16S-16H90-16H45, XL) RUN TEE (16S-12O-06SF-06SF-06SF) CAP (10OF) RADIATOR/OIL COOLER UN BR TEE (10OFX-10O-10O) HOSE (10OFX90-74"-2750) CONNECTOR (08S-10O90) BULK HOSE (1", SOLD PER 1') RETURN BRACKET HOSE (10OFX90-50"-3000) WORM CLAMP (1" TO 1-3/4") S/O BR TEE (12S-12H-16H90) S/O COUPLER (12S-12H90-06SF) S/O COUPLER (16S-16H-16H45) BRANCH TEE (06S-04O-04O) BK RUN TEE (10O-10O-10OL) BULK RUN TEE (10O)

REMARKS

REVERSE FORWARD

REFER TO "GROUND DRIVE TRANS MOUNT" PAGE USE 1 @ 25"

USE 1 @ 26" SEE FOOTNOTE 1 USE 1 @ 25"

USE 1 @ 12" USE 1 @ 20" SEE FOOTNOTE 2 SEE FOOTNOTE 2

USE 1 @ 12"

&

SEE FOOTNOTE 3

USE 1 @ 24" SEE FOOTNOTE 4

FOOTNOTES:

1.

2.

3.

4.

FOR DESTINATION OF 154-278 (REF #16) REFER TO PARTS PAGE "MOTOR SHIFT/DIFF LOCK HYDRAULICS" REF #6. #110-333 & #105-003 ATTACH TO STUD BOLTS ON LEFT FRAME PLATE. ABRASION SLEEVE (REF #27) IS USED TO WRAP HOSE (REF #21) AS IT WRAPS AROUND PUMP. RETURN BRACKET (316-822) IS ATTACHED USING CURRENT HARDWARE ON TRANSMISSION MOUNT.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

05

ID0153719

160

PUMP HYDROSTATIC ASSEMBLY 34 30

16 29

29 14

" "B " E V. "A ARG N UR . DR RV. . CH E T RE GRD . D DRV ARG "B" D GR RD. . CH PORT G ATT T. AT

CASE DRAIN

REV

30 35

14

28

15

FWD

"A" 17

"B"

ATTACHMENT PORT "A" (REV)

32

29

SEE F/N 3

RE TU RN

31

18

27

33 REFER TO REMOTE CROWD HYD. REFER TO PUMP DRIVE HYD.

23 20

11 12 13

1

9 6

19 2 TO MOTOR SHIFT/ DIFF LOCK HYDRAULICS

3

ATT. CHARGE

4

11 12

26

9

13

7 8 10

25

ATTACHMENT CHARGE

25

6 7

Y

8

25 24

32

V Z

Y

5

X

20

36 3 4

10 ATTACHMENT PORT "B" (FWD)

24 GRD. DRV. "B" GRD. DRV. "A" CHARGE

22

21 BOTTOM VIEW

NOTES: 1: REFER TO PARTS PAGE "PUMP DRIVE HYDRAULICS" FOR HYDRAULIC HOSE ROUTING INFORMATION. 2: HUB ON PUMP MEASURES 2-3/4" FROM PUMP MOUNTING SURFACE TO CENTER OF SPLINES.

V

02

Z

X

ID0139983

161

PUMP HYDROSTATIC ASSEMBLY REF PART NO. NUMBER

1.

QTY

158-048 1 158-039 214-892 190-679 500-763 500-764 158-040 500-806 499-448 499-447 165-728 500-639 307-330 1 107-416 6 105-091 6 165-889 1 106-383 12 116-151 2 105-475 4 105-993 2 105-994 2 105-066 4 105-244 4 105-070 4 149-058 2 155-198 1 159-147 1 155-224 1 149-820 1 149-819 1 153-911 2 515-462 1 515-396 1 515-358 1 154-255 3 154-220 3 154-230 159-156 1 105-003 2 154-384 3 155-260 6 310-246 1 154-226 2 159-381 307-535 515-085 1 110-332 1

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

DESCRIPTION

TANDEM PUMP ATTACHMENT PUMP PRESSURE SWITCH SEAL REPAIR KIT MULTIFUNCTION VALVE - RELIEF MULTIFUNCTION VALVE (#1) GROUND DRIVE PUMP SEAL REPAIR KIT SERVO COVER SERVO COVER (FULL DISPL.) SERVO GASKET NEUTRAL START SWITCH PUMP MOUNT BOLT (5/16-NC X 1-1/2") LOCKWASHER (5/16") FLYWHEEL COUPLING FLG LK SCREW (M10-1.50 X 30mm) SHOCK MOUNT WASHER (1/2") FLG BOLT (5/8-NC X 4") FLG LOCKNUT (5/8-NC) BOLT (1/2-NC X 1-3/4") WASHER (1/2") LOCKWASHER (1/2") RUN TEE (16S-120-06SF-06SF-06SF) S/O COUPLER (12S-12H90-06SF) QDC ADAPTER (02-06S) S/O BRANCH TEE (12S-12H-16H90) S/O COUPLER (16S-16H90-16H45, XL) S/O COUPLER (16S-16H-16H45) HOSE (04OFX90-10"-5000-AR) HOSE (04OFX90-22"-3000-AR) HOSE (04OFX90-8.0"-5000) HOSE (04OFX90-11"-5000) UNION (04O-04OFX90) CONNECTOR (04O-06S) BRANCH TEE (06S-040-04O) QDC ADAPTER (02-04OF) FLG LOCKNUT (5/16-NC) PLUG (06S) BK QDC ADAPTER (02-04OBK) TEST PORT BRACKET CONNECTOR (04O-06S90) CHECK VALVE (06S-06O) RETURN MANIFOLD HOSE (04OFX90-8.5"-3000) BOLT-ON CLAMP (1-5/8")

REMARKS

SEE FOOTNOTE 4

SEE FOOTNOTE 5 SEE FOOTNOTE 1 SEE FOOTNOTE 3 SEE FOOTNOTE 1

SEE FOOTNOTE 1 & 6

REFER TO PUMP DRIVE HYD. PARTS PAGE

REFER TO MOTOR SHIFT/DIFF LOCK HYDRAULICS PARTS PAGE

SEE FOOTNOTE 2 REFER TO PUMP DRIVE HYD. PARTS PAGE

NOT SHOWN:

FOOTNOTES:

1.

2.

3.

4.

5.

6.

USE LOCTITE NO. 242 OR ITS EQUIVALENT TEST PORT BRACKET (REF 31) BOLTS TO .312" STUD BOLTS ON FRAME. TORQUE TO 90 FT-LBS AND USE 242 LOCTITE. ATTACHMENT PUMP (90 SERIES) NEUTRAL SWITCH. G.D. PUMP (M46) NEUTRAL SWITCH; W/O CRUISE CONTROL. TORQUE TO 100 FT-LBS

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

02

ID0139983

162

163

164

165

166

167

168

169

170

HYDRAULIC FILTER HYDROSTATIC RT75

25 3

CASE DRAIN, ATTACHMENT

16 STEERING RETURN

TOP COOLER OUTLET

1 4

5

RETURN FROM FRONT ATTACHMENT

7

CASE DRAIN FROM PUMPS GRD. DRV. MOTOR RETURN

FL O W

RETURN TEST PORT

7

22

24 23

4

7

5

21

7 4 FL O W

10

6

2

7

20

FLO W

18 FLOW

11 14

17

9 13

7

19 7

12

7 8

19

7

15 7

BOTTOM COOLER INLET

12

04

ID0153615

171

HYDRAULIC FILTER HYDROSTATIC RT75 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

QTY

307-535 1 105-826 3 154-331 1 105-003 3 105-881 2 116-460 AR 111-027 10 157-345 1 153-792 153-791 217-765 306-862 1 107-003 2 106-709 2 153-110 2 514-088 1 116-460 AR 116-460 AR 154-188 1 155-231 1 153-888 1 115-733 AR 110-332 1 149-908 1 116-460 AR 149-820 116-460 AR 515-025 1

DESCRIPTION

RETURN MANIFOLD FLG LK BOLT (3/8-NC X 1") PLUG (08O) FLG LOCKNUT (5/16-NC) WASHER (5/16") BULK HOSE (1", SOLD PER 1') T-BOLT CLAMP (1.25" - 1.50") HYD OIL FILTER (20SF-20SF) FILTER ELEMENT (10 MICRON) FILTER ELEMENT (5 MICRON) INDICATOR SWITCH BRACKET FLG LK SCREW (M12-1.75 X 35mm) FLG LK NUT (M12-1.75) S/O COUPLER (20S-16H45) S/O COUPLER (16S-16H) BULK HOSE (1", SOLD PER 1') BULK HOSE (1", SOLD PER 1') S/O COUPLER (16S-16H90) S/O BR TEE (16S-16H-16H) CHECK VALVE (16SF-16SF, 25 PSI) ABRASION SLEEVE (SOLD PER FOOT) BOLT-ON CLAMP (1-5/8") RUN TEE (16S-16H-16H) BULK HOSE (1", SOLD PER 1') S/O CPLR (16S-16H90-16H45XL) BULK HOSE (1", SOLD PER 1') HOSE (08OFX90-40"-3000)

REMARKS

USE 1 @ 11.5"

& SEE FOOTNOTE 3

SEE FOOTNOTE 1 SEE FOOTNOTE 2

USE 1 @ 44" USE 1 @ 5.5"

USE 2 @ 12"

USE 1 @ 18" USE 1 @ 28"

NOT SHOWN:

115-687

AR

ABRASION SLEEVE(SOLD PER FOOT)

USE 1 @ 26" & SEE FOOTNOTE 4

FOOTNOTES:

1.

2.

3.

157-345 IS THE FILTER HEAD AND REGULAR FILTER ELEMENT 153-792.

IF THE HYDRAULIC SYSTEM IS EXPOSED TO CONTAMINATES, A NEW BREAK-IN FILTER 153-791 IS INSTALLED FOR 50 HOURS. "FOR DEALERSHIP USE" WHEN INSTALLING A REAR SUPPORT MOUNT FOR EARTH SAW HOSE 116-460 NEEDS T0 BE 14".

4.

PLACE 115-687 OVER REFERENCE 24, HOSE 116-460

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

04

ID0153615

172

HYDRAULIC FILTER GUARD

8

3

5 7

2

6

3

3

1

4

A

808-782

173

HYDRAULIC FILTER GUARD REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 HYD FILTER GUARD 1 FILTER HEAD 5 FLG LK SCREW (M12-1.75 X 35MM) 1 BK S/O COUPLER (10O-10H) 1 BRACKET 1 FILTER ELEMENT (10 MICRON) 2 FLG LK NUT (M12-1.75) 3 FLG LK BOLT (3/8-NC X 1")

322-662 157-345 107-003 149-624 306-862 153-792 106-709 105-826

DESCRIPTION

REMARKS

REFER TO FOOTNOTE 1 REFER TO FOOTNOTE 1 REFER TO FOOTNOTE 1 REFER TO FOOTNOTE 1 REFER TO FOOTNOTE 1 REFER TO FOOTNOTE 1 REFER TO FOOTNOTE 1

FOOTNOTES

1. FOR MORE DETAILS ON REF NO.'S 2 THRU 8 REFER TO PARTS PAGE "HYDRAULIC FILTER".

NOTE:

HYDRAULIC FILTER GUARD KIT #191-342 CONSIST OF 1X REF #1 AND 3X REF #3.

A

808-782

174

POWER STEERING VALVE HYD

3

TANK

LT L.S.

PRESS

6 4 RETURN MANIFOLD FOR HYDROSTATS REFER TO HYD. FILTER PAGE

4 5

2

RT

LT

RT

7 14

11

2

1 7

POWER SHIFT UNITS SEE FOOTNOTE 1

12

HYDROSTATIC SEE FOOTNOTE 1

9 LT

15

10 8

6 RT RETURN MANIFOLD FOR POWER SHIFT REFER TO GROUND DRIVE MOTOR PAGE

8

16

07

13

TO FRONT STEERING AXLE (STEERING CYL.)

ID0064418

175

POWER STEERING VALVE HYD REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

117-214 515-222 149-358 158-900 190-913 154-227 154-276 154-252 154-705 152-146 154-695 153-315 117-396 117-387 157-917 307-535 153-210 154-222

QTY

1 1 1 1 1 2 2 2 2 2 1 1 1 1 1

DESCRIPTION

ABRASION SLEEVE (1.25" X 40") HOSE (06OFX45-46"-3000) HOSE (06OFX45-55"-3000) POWER STEERING VALVE SEAL REPAIR KIT CONNECTOR (06O-08S90) CONNECTOR (04O-08S90) CONNECTOR (04S-04O90) HOSE (04OFX90-60"-3000) CONNECTOR (04O-08S) SHORT HOSE (04OFX-38"-3000) HOSE (06OFX90S-36"-3000) ABRASION SLEEVE (1.25" X 28") ABRASION SLEEVE (1.00" X 42") PRIORITY VALVE RETURN MANIFOLD MANIFOLD (5-PORT) CONNECTOR (060-08S)

REMARKS

HYDROSTAT UNITS ONLY & SEE FOOTNOTE 1 POWER SHIFT UNITS ONLY & SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1.

AS INDICATED BY THE GRAPHICS, "RETURN TO TANK" ON HYDROSTATIC UNITS RETURNS TO RETURN MANIFOLD ON SIDE OF LEFT FRAME PLATE. "RETURN TO TANK" ON POWER SHIFT UNITS RETURNS TO RETURN MANIFOLD ON CROSSMEMBER OF FRAME.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

07

ID0064418

176

REAR STEER HYDRAULICS

4

13 CONNECTS TO REAR SPOOL

2 18 5

7

T OU

8

ET SID

OP T OU

OT EB SID

M TO

3

TO REAR AXLE STEER CYL. RIGHT SIDE

13 16 TO REAR AXLE

10 15

STEER CYL. LEFT SIDE

6 19 9

1

11 8 10

12 17 SEE FOOTNOTE 2

FROM "PB" ON BFB REFER TO BACKFILL BLADE VALVE

21

14

12

REFER TO (REF #20) MOTOR SHIFT/DIFF LOCK HYDRAULICS

20

ID0064417

177

REAR STEER HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

154-222 154-934 152-146 117-608 153-785 153-786 159-505 149-616 154-391 106-379 106-354 106-385 106-632 307-074 153-320 157-334 154-298 117-328 515-462 154-344 154-276 153-907 149-851 515-129

QTY

1 1 1 1 1 1 1 4 3 4 3 1 1 2 1 1 1 1 -

DESCRIPTION

CONNECTOR (06O-08S) HOSE (04OFX45-18"-3000) CONNECTOR (04O-08S) SHORT ABRASION SLEEVE (1.00" X 15") HYDRAULIC VALVE (SGL SPOOL) HYDRAULIC VALVE (2-SPOOL) SOLENOID TUBE CAP NUT CONNECTOR (08S-10O) FLG LK SCREW (M6-1.00 X 20mm) FLANGE NUT (M12-1.75) FLG LOCKNUT (M6-1.00) FLG LK SCREW (M12-1.75 X 35mm, SER) BRACKET HOSE (06OFX90L-17"-3000) CONNECTOR (04O-06S90, ORF) CONNECTOR (10S-10O90) ABRASION SLEEVE (1.00" X 18") HOSE (04OFX90-22"-3000 AR) UN RUN TEE (06OFX-06O-06O) CONNECTOR (04O-08S90) HOSE (10OFX45-16"-3000) HYD. LINE (-10) HOSE (10OFX90-30"-3000)

REMARKS

SEE FOOTNOTE 1, SEAL KIT 500-2201. SEE NOT SHOWN FOR S.P.

REFER TO "MOTOR SHIFT/DIFF LOCK HYD" FOR DESTINATION

SEE FOOTNOTE 2

NOT SHOWN:

500-2372 AR

SOLENOID TUBE, UNLOADING VALVE

FOOTNOTES:

1.

2.

153-786 (2 SPOOL VALVE) IS USED WHEN FRAME TILT & REAR STEER OPTIONS ARE BOTH USED. REFERENCE #3 FROM "PUMP DRIVE HYD" WILL ATTACH HERE UNTIL A REAR ATTACHMENT IS ATTACHED ON TRACTOR.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

12

ID0064417

178

NO FRAME TILT/NO REAR STEER OPTION

3 6

8

1

2

4 5 7

07

9

ID0115605

179

NO FRAME TILT/NO REAR STEER OPTION REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

106-988 110-333 154-464 315-176 106-385 153-956 306-885 157-343 149-851

QTY

1 1 1 1 1 1 -

DESCRIPTION

FLG LK SCREW (M6-1.00 X 20mm) BOLT-ON CLAMP (1") CONNECTOR (10O-10O) SPACER BRACKET FLG LOCKNUT (M6-1.00) HOSE (10OFX90S-50"-3000) MOUNT PLATE HOSE (10OFX90S-120"-3000) HYD LINE (-10)

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. REFERENCE #4 (315-176) WILL REPLACE (1X) REFERENCE #2 ON PARTS PAGE "MOTOR SHIFT/DIFF LOCK HYD" WHEN "NO FRAME TILT/NO REAR STEER" IS USED.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

07

ID0115605

180

HYDRAULIC CONTROL VALVE 3 SPOOL UPPER VALVE

7

2

8

1 11

13 12

10

5

9

4

3

6

07

ID0114909

181

HYDRAULIC CONTROL VALVE 3 SPOOL UPPER VALVE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

158-033 159-809 500-933 599-278 500-935 191-149 500-934 191-153 191-157 191-151 155-179 154-384 599-279 500-928

QTY

1 1 3 1 1 1 2 3 1 6 1 1 2 2

DESCRIPTION

REMARKS

HYD CONTROL VALVE (3-SPOOL) HYD CONTROL VALVE (3-SPOOL) LOAD CHECK PLUG KIT NR PLUG KIT FLOAT POSITIONER KIT PLUG SEAL KIT SPOOL POSITIONER KIT SPOOL BOOT KIT POWER BEYOND SLEEVE SPOOL LIP SEAL KIT PLUG (10S, SOC) PLUG (06S) WORK PORT NR PLUG KIT SEAL REPAIR KIT

ENDS WITH S/N_______. OBSOLETE BEGINS WITH S/N_________. USE FLOAT KIT 500-2020

NOT SHOWN:

FOOTNOTES:

1. EARLY PRODUCTION VALVES HAVE A MACHINED WORK PORT WITH A PLUG INSTALLED, FUTURE PRODUCTION VALVES WILL NOT HAVE A MACHINED WORK PORT.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

07

ID0114909

182

HYDRAULIC CYLINDER 2.0" X 1.00" X 3.38"

2

1 3 4

5

6

7

D

806-388

183

HYDRAULIC CYLINDER 2.0" X 1.00" X 3.38" REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

151-202 190-165 150-778 150-700 106-096 150-775 150-772 150-698

NOT SHOWN: 259-100 259-188 259-239 259-241

QTY

DESCRIPTION

REMARKS

INCLUDES REF NO.'S 1 THRU 7

1 1 1 1 1 1 1

HYD CYL (2" X 1" X 3.38") SEAL REPAIR KIT (2" X 1") LOCK RING (2") CYLINDER BARREL FLG BOLT (1/2-NC X 1-3/4",GD8) CYLINDER PISTON (2" X 1") CYLINDER HEAD (2" X 1") CYLINDER ROD

SEE FOOTNOTE 1

U-SEAL INSTALLER (1"-1.499") CYL HEAD SPANNER - TWO PIN WIPER SEAL INSTALLER (2") PISTON INSTALLER (2")

FOOTNOTES

1. APPLY LOCTITE 271 OR 277. TORQUE TO 90-100 FT-LBS (120-135 N.M.)

NOTE:

D

806-388

184

185

186

HYDRAULIC CYLINDER (3" X 1.75" X 8")

2

1 3 4 5 6

7

8

07

ID0125475

187

HYDRAULIC CYLINDER 3" X 1.75" X 8" REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

151-070 190-172 150-911 152-014 106-122 105-363 150-765 150-763 150-436

QTY

1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CYL (3.0" X 1.75" X 8.0") SEAL REPAIR KIT (3.0" X 1.75") LOCK RING (3") CYLINDER BARREL (3") BOLT (7/8-NC X 2-1/4", GD8) WASHER (7/8") CYLINDER PISTON (3" X 1.75") CYLINDER HEAD (3" X 1.75") CYLINDER ROD (1.75")

INCL REF NO.'S 1 THRU 7 INCL REF NO.'S 4 THRU 5

SEE FOOTNOTE 1 INCL MOLDED-ON WEAR RING

NOT SHOWN:

259-040 259-238 259-065 259-066 259-188

U-SEAL INSTALLER (1.5" - UP) WIPER INSTALLER (1.75") PISTON SEAL INSTALLER (3") PISTON INSTALLER (3") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. CLEAN & DRY THREADS.

APPLY RED LOCTITE (RC 271 OR RC 272).

TORQUE TO 410-460 FT-LBS (560-625 N.M.)

NOTE:

07

ID0125475

188

NOTES:

ID0134963

189

ELECTRICAL

SEE TECHNICAL SUPPLEMENT FOR FURTHER ELECTRICAL INFORMATION

ID0134878

190

NOTES:

ID0134963

191

MISCELLANEOUS

ID0135063

192

SAE Bolt and Nut Torque Value Chart Grade 5: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

12

16

8

11

20

27

5/16

25

34

15

20

45

60

3/8

40

54

25

34

75

100

7/16

65

90

40

55

125

170

1/2

100

135

60

80

190

260

9/16

150

200

90

125

270

370

5/8

200

270

120

165

370

500

3/4

350

475

210

285

650

880

7/8

560

760

340

460

1250

1425

1

840

1140

500

680

1580

2145

1-1/8

1030

1400

320

840

1950

3645

1-1/4

1460

1980

880

1195

2760

3475

Grade 8: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

14

19

10

14

24

33

5/16

30

40

18

25

50

70

3/8

55

73

35

50

90

125

7/16

85

115

50

70

140

190

1/2

130

175

80

110

220

300

9/16

190

260

110

150

310

420

5/8

260

355

160

245

430

585

3/4

450

610

270

365

750

1015

7/8

730

990

440

600

1210

1640

1

1090

1480

650

880

1320

2465

1-1/8

1550

2100

930

1260

2580

3500

1-1/4

2180

2955

1310

1780

3640

4935

*drilled and tapped

193

Metric Bolt and Cap Screw Torque Values Size

Class 4.8

Class 8.8 and 9.8

Class 10.9

Class 12.9

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

M6

4.8

3.5

6

4.5

9

6.5

11

8.5

13

9.5

17

12

15

11.5

19

14.5

M8

12

8.5

15

11

22

16

28

20

32

24

40

30

37

28

47

35

M10

23

17

29

21

43

32

55

40

63

47

80

60

75

55

95

70

M12

40

29

50

37

75

55

95

70

110

80

140

105

130

95

165

120

M14

63

47

80

60

120

88

150

110

175

130

225

165

205

150

260

190

M16

100

73

125

92

190

140

240

175

275

200

350

225

320

240

400

300

M18

135

100

175

125

260

195

330

250

375

275

475

350

440

325

560

410

M20

190

140

240

180

375

275

475

350

530

400

675

500

625

460

800

580

M22

260

190

330

250

510

375

650

475

725

540

925

675

850

625

1075

800

M24

330

250

425

310

650

475

825

600

925

675

1150

850

1075

800

1350

1000

M27

490

360

625

450

950

700

1200

875

1350

1000

1700

1250

1600

1150

2000

1500

M30

675

490

850

625

1600

950

1650

1200

1850

1350

2300

1700

2150

1600

2700

2000

M33

900

675

1150

850

1750

1300

2200

1650

2500

1850

3150

2350

2900

2150

3700

2750

M36

1150

850

1450

1075

2250

1650

2850

2100

3200

2350

4050

3000

3750

2750

4750

3500

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, these should only be tightened to strength of original.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Tighten plastic insert or crimped type steel locknuts to approximately 50% of dry torque indicated on chart.

Apply torque to the nut - not the bolt head. Tighten toothed or serrated type locknuts to full torque value.

LUBRICATED means coated with lubricant. DRY means plain or zinc plated without any type of lubricant.

194

Hydraulic Cylinder Bolt Torque Chart Bolt Size (inch)

Bolt Part No.

Cylinder Repair Kit Part No.

Torque (ft•lb)

Torque (N•m)

1/2

106-096

190-165

90-100

120-135

5/8

106-097

190-166 & 190-169

180-200

245-270

3/4

106-098

190-167 & 190-170

290-325

395-440

7/8

106-122

190-172 & 190-174

410-640

550-625

1

106-145

190-175 & 190-189

630-700

855-950

1-1/8

106-146

190-177

770-850

1045-1170

As a general rule: •

1/2-inch bolts are used in cylinders with 1-inch rods

•

5/8-inch bolts are used in cylinders with 1 1/4-inch rods

•

3/4-inch bolts are used in cylinders with 1 1/2-inch rods

•

7/8-inch bolts are used in cylinders with 1 3/4-inch rods

•

1-inch bolts are used in cylinders with 2-inch rods (one with 1 3/4-inch)

•

1-1/8-inch bolts are used in cylinders with 2-1/4-inch rods

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and torque to value shown on chart.

SAE & ORS Hydraulic Fitting Replacement O-Ring Chart Fraction Size

Dash Size

SAE (Port Seal O-Ring)

ORS (Face Seal O-Ring)

Thread Size

O-Ring P/N

Thread Size

O-Ring P/N

1/16

1

NA

NA

NA

NA

1/8

2

5/16 - 24

NA

NA

NA

3/16

3

3/8 - 24

NA

NA

NA

1/4

4

7/16 - 20

155-760

9/16 - 18

157-037

5/16

5

1/2 - 20

NA

NA

NA

3/8

6

9/16 - 18

155-705

11/16 - 16

157-038

1/2

8

3/4 -16

155-706

13/16 - 16

157-039

5/8

10

7/8 - 14

155-707

1 - 14

157-040

3/4

12

1-1/16 - 12

155-709

1-3/16 - 12

157-017

7/8

14

1-3/16 - 12

155-747

NA

NA

1

16

1-5/16 - 12

155-748

1-7/16 - 12

155-714

1-1/4

20

1-5/8 - 12

155-702

1-11/16 - 12

NA

1-1/2

24

1-7/8 - 12

157-001

2 -12

NA

2

32

2-1/2 - 12

NA

NA

NA

2-1/2

40

3 - 12

NA

NA

NA

3

48

3-1/2 - 12

NA

NA

NA

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current CMW part numbered o-ring, or dash size does not occur in current CMW applications SAE = straight thread fitting that seals by sandwiching a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORS = o-ring face seal; a type of fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface

195

196

RT75H Related Publications Component

Ass’y

P/N

Model: RT75 .................. Parts Manual ......................................................... ............ 053-121 RT75 .................. Operators Manual .................................................. ............ 054-125 RT75 ................... Repair Guide (Service Manual) .............................. ................ N/A RT75 ................... Technical Supplement ........................................... ............ 053-127 RT75 .................. Special Tools Guide .............................................. ............ 052-901 Engine: John Deere ......... Operators Manual – 4045DF270 .................... 194-512 .... 054-087

Filters Engine: Air Filter Parts Ass’y ......................................................................................... 197-762 Element (primary) .............................................................................. 197-763 Element (secondary) .......................................................................... 197-764 Oil Filter Element (spin-on) - John Deere .......................................................... 194-478 Fuel Strainer (04H) ............................................................................................ 156-268 Primary Filter Sediment Bowl ........................................................................... 194-493 Fuel Filter Element-John Deere (Primary) ………………………………………… 194588 Fuel Filter Element-John Deere (Secondary) ……………………………………… 159-255 Hydraulic: Oil Filter Element (1-1/2-UNF, spin-on, Replacement) ...................................... 153-792 Element (1-1/2-UNF, spin-on, Break-In) .............................................. 153-791

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) .............................. 190-051 O-ring Repair Kit - Field Service (46 different O-rings) ..................................... 190-052

VER.02

ID0092776

197

Parts Manual Change Request (Please print clearly)

Date: _______________________

Dealer No. (required): _____________________________

Your Name: _____________________________ Phone: _________________

Position: _____________________________

Fax: _________________

E-mail: __________________

Publication Information: Parts Manual No.: _____-_____

Model: __________

Illustration Part No.: Manual Page No.: 1. _____-_____ .......................................................... 1. __________ 2. _____-_____ .......................................................... 2. __________ 3. _____-_____ .......................................................... 3. __________ Nature of Change Request:

 Text

 Graphics

 Missing Information

Describe change requested (if possible, include copy of publication page with changes marked.): ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ Please fax completed form to Parts Manual Department (580) 572-3525 Thank you for taking the time to submit this request. We will contact you if further information is needed to process your request.

ID0135001

198

199

ID0040564

200

ID0135281