Ditch Witch RT45 Tractor Deutz® TD2.9L4 Parts Manual 053-1366 PDF

RT45 Deutz® TD2.9L4

Parts Manual

Issue 17

053-1366

1

RT45 ISSUE NO. 17PL-04/23 For Replacement Copy Order P/N 053-1366

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works .

This manual contains information concerning the following models: RT45 Tractor

Copyright 2009, 2011, 2012, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 by The Charles Machine Works, Inc. Inc.

, Ditch Witch, CMW, AutoCrowd, Jet Trac, Roto Witch, Subsite, Fluid Miser, Power Pipe, Super Witch, Pierce Arrow, Zahn, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY ______________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy July 2019

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse (including, but not limited to, rollover), abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 07

ID0134872

5

CONTENTS______________________ Decals Decal Location ............................................. 8

Engine Components Air Filter System ........................................ 22 Cold Start Kit ............................................. 28 Engine........................................................ 14 Engine Cooling System .............................. 24 Engine Mounts, Heavy Duty...................... 18 Engine Mounts, Isolated ........................... 16 Fuel Tank & Lines ...................................... 26 Manifold .................................................... 20

Power Train Carrier – Dana 44 Limited Slip ........................ 58 Differential – Dana 60 HD Limited Slip ............ 60 Drive Line .................................................. 36 Front Differential – Dana 44........................ 42 Front Differential – Dana 60 HD ..............46, 48 Front Differential Mount .....................38, 40 Front Differential Mount – Dana 60 HD ....... 44 Ground Drive Gearbox .............................. 32 Ground Drive Gearbox – HD Dana 60 .......... 34 Rear Axle – Dana 60 HD ............................... 62 Rear Differential – Dana 44 ......................... 50 Rear Steer Differential .............................. 52 Rear Steer Differential – Dana 60 ............... 56 Rear Steer Diff. Mount – Dana 60 HD .......... 54

Frame Components 2-Post ROPS............................................... 94 Backfill Blade ............................................. 90 Console...................................................... 76 Console & Steps ........................................ 74 Fender & Covers – Left............................... 68 Fender & Covers – Right ............................. 72 Firewall .................................................78, 80

Hood & Panels........................................... 66 Jumper Post .............................................. 70 Pump Mount ............................................. 84 Seat ........................................................... 82 Tape Dispenser.......................................... 96 Tilt Backfill Blade – 64” .............................. 92 Tire – Tube – Wheel – Dana 44 ................... 86 Tire – Tube – Wheel – Dana 60 ................... 88

Control Components Attachment Drive Controls ..................... 110 Foot Control ............................................ 102 GPS Kit – CLM3000 .................................... 106 Ground Drive Controls ............................ 104 Hand Throttle .......................................... 100 Parking Brake .................................. 112, 114 Rear Steer Indicator ........................ 116, 118 Telematics Kit – CLM3000 ......................... 108

Hydraulics Attachment Drive Hydraulics .................. 128 Attachment Tilt/Swing Conv Kit .............. 130 Auxiliary Manifold – Optional ................... 132 Backfill Blade Hydraulics ......................... 140 Control Valve........................... 150, 152, 154 Cylinder – 2” x 1” x 2.5” .............................. 156 Cylinder – 2” x 1” x 4” ................................ 160 Cylinder – 2” x 1” x 5” ................................ 162 Cylinder – 2.5” x 1.25” x 5” ......................... 164 Cylinder – NS 2” x 1” x 3” ........................... 158 Ground Drive Hydraulics ......................... 126 Motor – 14 Spline ...................................... 146 Oil Cooler & Filter Hydraulics .................. 122 Pump – 9 Tooth Spline ................................ 148 Pumps & Reservoir.................................. 124 Rear Steer Hydraulics .............................. 138 Steering Hydraulics ................................. 136 Tilt Blade Hydraulics................................ 142 Tow Valve Hydraulics .............................. 134 Trick Quick Coupler ................................. 144

ID0242638

6

CONTENTS______________________ Electrical

Miscellaneous

*See Technical Supplement for Further Electrical Information ................ #053-1355

Bolt/Nut Torque Charts........................... 180 Filters....................................................... 186 Optional Kits ............................................ 186 Related Publications ............................... 186 Replacement O-Ring Chart ..................... 185 Warranty Registration............................. 188

Accessories Backup Alarm Kit ..................................... 176 Front Counterweight............................... 172 Light Kit ................................................... 170 Personnel Protection Kit ......................... 174

ID0242638

7

DECALS

ID0135069

8

DECAL LOCATION RT45

17 1 UNDER SEAT CONSOLE

2 3

7 8

5

9

6

15

14

12 11

4

13 16 06

BATTERY

10 ID0229637

9

DECAL LOCATION RT45 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

270-4563 701-303 700-128 273-548 700-137 270-4561 275-449 274-736 701-361 275-148 274-291 274-318 274-375 274-442 270-6964 700-196 273-553 275-023

QTY

1 1 1 2 1 1 1 1 1 1 3 1 3 1 2 1 1

DESCRIPTION

DECAL KIT - RT45 WARNING ROLLOVER ISO THROTTLE CONTROL RT40 LUBE CHART WARNING FALL POSSIBLE ISO RT45 MODEL ID LT DITCH WITCH LOGO PLACARD ATTACHMENT CONTROL PARKING BRAKE FUEL TANK (DIESEL) SOUND POWER 10 TIE DOWN LOCATION MASTER DISCONNECT LIFT LOCATION NOTICE ELECTRICAL SYSTEM ISO STACKED DITCH WITCH LOGOTYPE MANIFOLD OIL LEVEL

REMARKS

SEE FOOT NOTE 1

FOOTNOTES 1. NOT PART OF KIT. 2. NOT PART OF KIT. USED WITH TILT BACKFILL BLADE.

06

ID0229637

10

DECAL LOCATION RT45

30 20 29

18

31

23

19 33 34

35

25 26 22

24

27

4 36 15

38

32

11 21 WITH SEAT DECK RAISED

INSIDE FACE OF ACCESS PANEL 28

06

ID0229637

11

DECAL LOCATION RT45 REF PART NO. NUMBER

18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

270-8178 274-750 274-822 270-7894 700-203 270-1123 275-310 270-1410 270-1124 270-5659 270-4562 700-143 700-097 270-4560 270-4559 274-751 700-205 700-226 273-599 274-087 270-7792 270-6911

QTY

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

RED HI VIS 1.5” REFLECTORS BFB TILT FUNCTION TEST PORT FUNCTION RESERVOIR (THF) ISO IGNITION DECAL LED DISPLAY DITCH WITCH EMBLEM MAIN FUSE LED DISPLAY ENGINE OIL DRAIN RELAY/FUSE DECAL WARNING READ MANUAL ISO CAUTION HOT PARTS ISO RT45 MODEL ID RT CONSOLE DECAL REAR STR. FUNCTION CONTROL VALVE CONTROL VALVE NOTICE MOUNTING HOOD REAR STEER INDICATOR OPERATOR MANUAL REPLACEMENT ISO WARNING ONE CALL ISO

REMARKS

SEE FOOT NOTE 2

USE W/ REAR STEER, SEE FOOTNOTE 1 USE W/O REAR STEER USE W/ REAR STEER, SEE FOOTNOTE 1 USE W/ REAR STEER, SEE FOOTNOTE 1 LOCATE NEAR OPERATOR MANUAL BOX

FOOTNOTES 1. NOT PART OF KIT. 2. NOT PART OF KIT. USED WITH TILT BACKFILL BLADE.

06

ID0229637

12

NOTES:

ID0134963

13

ENGINE COMPONENTS

ID0134845

14

DEUTZ DIESEL ENGINE

9

8

11

13 6

1 10

5

3 4 12 7 12 14 17 17

20 7

21

20 17

16 19

02

18

2

15 22

ID0228829

15

DEUTZ DIESEL ENGINE REF PART NO. NUMBER

QTY

1 195-1090 2 306-609 3 194-763 4 170-445 5 194-570 6 195-807 7 105-806 8 105-073 9 105-839 10 105-058 11 105-062 12 194-413 13 195-849 14 215-304 15 325-168 16 362-628 17 106-386 18 325-167 19 106-989 20 105-117 21 106-328 22 178-973

1 1 1 1 1 1 7 8 8 1 2 1 1 1 1 1 5 1 3 2 1 3

DESCRIPTION

ENGINE, DUETZ D2011LO3o (RT40) HIGH FREQUENCY HORN MOUNT PLATE BELT OIL FILL CAP FUEL FILTER ELEMENT (PRIMARY) SCREW (M8-1.25 X 25MM) LOCK WASHER (7/16") SCREW (M10-1.50 X 55MM) BELLEVILLE WASHER (1/2") BOLT (1/2-NC X 1-1/2", FER) FLYWHEEL/PUMP COUPLING ELEMENT (12NF,3.562" SPIN-ON) BAT CABLE (4 GA X 13", BLK) GUARD BRACKET SPACER GUARD FLG LOCKNUT (M8-1.25) GUARD BRACKET FLG LK SCREW (M8-1.25 X 35MM) WASHER (5/16") SCREW (M8-1.25 X 40MM) SPACER

REMARKS

SEE FOOTNOTE 3 MOUNT HORN ON NUT SIDE OF MANIFOLD

SEE FOOTNOTE 1

SEE FOOTNOTE 1 USE EXISTING HARDWARE FROM STARTER AND FIREWALL

NOT SHOWN:

165-744 194-556 213-189 194-548 196-275 195-1389 194-038 194-039 195-849 195-807 159-074

FUEL PUMP GASKET FUEL INJECTOR ALTERNATOR STARTER MUFFLER FUEL LIFT PUMP FILTER ELEMENT - PRIMARY FILTER ELEMENT - SECONDARY ELEMENT (12NF,3.562" SPIN-ON) FUEL FILTER ELEMENT (PRIMARY) FILTER ELEMENT (1-3/8-UNF)

SEE FOOTNOTE 2.

SERVICE PART

FOOTNOTES:

1. LOCTITE RC271 (RED) OR RC680 (GREEN) 2. SEE "MUFFLER" PARTS PAGE ID0176856 FOR COMPONENTS 3. USE UPTIME RT45 DEUTZ KIT 190-1764, INCLUDES: 194-038, 194-039, 195-849, 195-807 & 159-074 FILTERS.

NOTE:

02

ID0228829

16

ENGINE MOUNTS, ISOLATED

9

19 3

12 15

7

4 11

5

10

20 1 8

14

14 2 18 21

22

16 17

13

14

6

6 13

01

ID0229385

17

ENGINE MOUNTS, ISOLATED REF PART NO. NUMBER

QTY

190-1514 106-597 323-050 106-596 300-4445 118-132 106-743 323-051 323-052 300-4552 106-210 105-071 106-806 106-096 106-198 106-162 106-389 106-386 323-053 106-598 105-990 116-496 105-475

4 1 4 1 2 2 1 1 1 2 2 2 4 6 4 4 4 1 4 4 2 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

DESCRIPTION

ENGINE MOUNT, ISOLATED LK SCREW (M14-2.00X40MM,EPXY) RIGHT MOUNT BRACKET LK SCREW (M14-2.00X30MM,EPXY) LEFT FRONT ENGINE MOUNT SHOCK MOUNT WASHER (.531", HARDENED) RIGHT ENGINE MOUNT LEFT ENGINE MOUNT RT. FRONT ENG. MOUNT BOLT (1/2-NC X 3") WASHER (1/2") FLG LK SCREW (M12-1.75 X 25MM) FLG BOLT (1/2-NC X 1-3/4",GD8) FLG LOCKNUT (1/2-NC, GD8) FLG SCREW (M8-1.25 X 20MM, GD8) WASHER (M8) FLG LOCKNUT (M8-1.25) LEFT ISOLATOR MOUNT WASHER (9/16" HARDENED) LOCK WASHER (9/16") SHOCK MOUNT WASHER (1/2")

REMARKS

INCLUDES REF. NO'S 5, 10-12, 14-17, & 21-22.

SEE F/N 1 AND 2 SEE F/N 1 AND 2 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 5 SEE F/N 4 SEE F/N 3 SEE F/N 3

NOT SHOWN:

FOOTNOTES:

1. NO PAINT AREA; CLEAN PAINT OFF OF ENGINE BLOCK AND MOUNTS BEFORE BOLTING MOUNTS TO BLOCK. TAP OUT MOUNTING HOLES (M14 X 2.0) TO REMOVE PAINT; CLEAN WITH SAFETY SOLVENT; DRY WITH COMPRESSED AIR. 2. ALL METRIC ENGINE MOUNTING BOLTS, TORQUE TO 100 FT. LBS. 3. ALL 1/2"-NC FLANGED FACE ENGINE MOUNTING BOLTS; TORQUE TO 110-120 FT. LBS. 4. TORQUE TO 35 FT. LBS.; LOCTITE 242 5. TORQUE TO 175 FT. LBS.; LOCTITE 271 OR 277 NOTE:

01

ID0229385

18

ENGINE MOUNTS, HEAVY DUTY

19 3 9

12 4

15

7 10 11

5

21

20

1

8 14

14

2 18

16 17

13

14

22

6 6 13

01

ID0229425

19

ENGINE MOUNTS, HEAVY DUTY REF PART NO. NUMBER

QTY

190-1515 106-597 323-050 106-596 300-4445 300-9380 106-743 323-051 323-052 300-4552 106-197 105-071 106-806 106-096 106-198 106-992 106-389 106-386 323-053 106-598 105-990 300-9659 105-475

4 1 4 1 2 2 1 1 1 2 2 2 4 6 4 4 4 1 4 4 2 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

DESCRIPTION

ENGINE MOUNT, SOLID LK SCREW (M14-2.00X40MM,EPXY) RIGHT MOUNT BRACKET LK SCREW (M14-2.00X30MM,EPXY) LEFT FRONT ENGINE MOUNT ENGINE FRONT SOLID MOUNT WASHER (.531", HARDENED) RIGHT ENGINE MOUNT LEFT ENGINE MOUNT RT. FRONT ENG. MOUNT BOLT (1/2-NC X 2-1/2", GD8)) WASHER (1/2") FLG LK SCREW (M12-1.75 X 25MM) FLG BOLT (1/2-NC X 1-3/4",GD8) FLG LOCKNUT (1/2-NC, GD8) FLG LK SCREW (M8-1.25 X 25MM) WASHER (M8) FLG LOCKNUT (M8-1.25) LEFT ISOLATOR MOUNT WASHER (9/16" HARDENED) LOCK WASHER (9/16") MOUNT BOSS WASHER (1/2")

REMARKS

INCLUDES REF. NO'S 5, 10 - 12, 14-17, & 21-22.

SEE F/N 1 AND 2 SEE F/N 1 AND 2 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 5 SEE F/N 4 SEE F/N 3 SEE F/N 3

NOT SHOWN:

FOOTNOTES:

1. NO PAINT AREA; CLEAN PAINT OFF OF ENGINE BLOCK AND MOUNTS BEFORE BOLTING MOUNTS TO BLOCK. TAP OUT MOUNTING HOLES (M14 X 2.0) TO REMOVE PAINT; CLEAN WITH SAFETY SOLVENT; DRY WITH COMPRESSED AIR. 2. ALL METRIC ENGINE MOUNTING BOLTS, TORQUE TO 100 FT. LBS. 3. ALL 1/2"-NC FLANGED FACE ENGINE MOUNTING BOLTS; TORQUE TO 110-120 FT. LBS. 4. TORQUE TO 70 FT. LBS.; LOCTITE 242 5. TORQUE TO 130 FT. LBS.; LOCTITE 271 OR 277 NOTE:

01

ID0229425

20

MANIFOLD

27 9

21 24

23

27

25 26

10

12

9 5

7

14 11

4 33

32 3

4

15

22

17 15

17

1

16 17 9

6

15 31 29

8

01

34

17 2

30

ID0240531

21

MANIFOLD REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 21 22 23 24 25 26 27 28 29 30 31 32 33 34

QTY

DESCRIPTION

REMARKS

196-276 1 EXHAUST ELBOW 300-2464 1 MANIFOLD BRACKET 300-2465 1 HYDRAULIC FILTER BRACKET 106-380 3 FLG LK SCREW (M8-1.25 X 16MM) 110-856 1 BOLT-ON CLAMP (1-5/8") 116-335 38 BULK HOSE (1", SOLD PER FT) 116-335 30 BULK HOSE (1", SOLD PER FT) 115-813 1 ABRASION SLEEVE (1.59" X 36") 105-825 5 FLG LK BOLT (3/8-NC X 3/4) 110-353 4 WORM CLAMP (3/4" TO 1-1/2") 196-275 1 MUFFLER (EXPORT) 165-727 3 EXHAUST MANIFOLD GASKET 106-139 6 STUD BOLT (M10-1.50 X 42MM) 105-894 6 LOCKNUT(M10-1.50,PRV TRQ,10.9) 105-095 9 WASHER (1/4") 155-230 1 S/O COUPLER (16S-16H45) 106-231 9 SCREW (M6-1.00 X 16MM) 300-2591 1 MUFFLER HEAT SHIELD 184-820 4 SPACER 328-466 1 HEAT DEFLECTOR 105-856 4 BOLT (1/4-NC X 1 1/4") 105-284 4 WASHER (3/16") 105-085 4 LOCKNUT (1/4"-NC) 105-845 3 FLG LOCKNUT (3/8-NC) 105-834 1 FLG LOCKNUT (3/8-NC) 110-332 1 BOLT-ON CLAMP (1-5/8") 110-030 3 CABLE TIE (1/16" TO 4") 362-774 1 BOTTOM SHIELD 300-3142 1 MUFFLER SHIELD (FRONT) 300-3145 1 MUFFLER SHEILD (REAR) 106-574 4 CLIP NUT (M6-1.00)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0240531

22

AIR FILTER SYSTEM

9

7 9 8

1 15

5 2

6

4

9 3 6 10

12 11 5

6

13 15

02

14

ID0234641

23

AIR FILTER SYSTEM REF PART NO. NUMBER

QTY

1 194-093 2 194-036 3 300-9485 4 106-380 5 106-162 6 106-386 7 195-1488 8 195-1489 9 110-134 10 195-1490 11 300-9488 12 195-1344 13 116-192 14 156-241 15 155-150

1 1 1 2 3 5 1 1 3 1 1 1 1 1 2

DESCRIPTION

AIR FILTER PARTS ASS'Y MOUNTING CLAMP (5.750") FILTER BRACKET FLG LK SCREW (M8-1.25 X 16MM) FLG SCREW (M8-1.25 X 20MM, GD8) FLG LOCKNUT (M8-1.25) AIR INTAKE HOSE AIR INTAKE HUMP HOSE WORM CLAMP (2.062" TO 2.750") AIR INTAKE FLANGE MOUNT TAB GRADUATED RESTRICTION INDICATOR (20"H2O) BULK HOSE (7/64", SOLD PER 1") STREET ELBOW (02N-02NF90) S/O COUPLER (02N-02H)

REMARKS

REFER TO "NOTE" SECTION

TORQUE TO MAX. 40in-lbs ON AIR FILTER CONNECTION

USE 1 @ 20"

NOTE:

REFERENCE #1 194-093 AIR FILTER PARTS CONTAINS: 194-038 1 FILTER ELEMENT-PRIMARY 194-039 1 FILTER ELEMENT-SECONDARY 194-761 1 DISCHARGE VALVE 195-1366 1 FILTER END CAP

NOT SHOWN:

FOOTNOTES:

02

ID0234641

24

ENGINE COOLING SYSTEM

10

11

15

17

4

18 8

7 6

14

20

5

4

9

1

15 17

4

13

76 5

16

3 4

4

5 5

2 12

04

16

4

ID0228905

25

ENGINE COOLING SYSTEM REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20

1 EOC/HOC 1 SHROUD 1 BULK STRIP (3/4" X .25"THK, SOLD PER 1") 25 WASHER (1/4") 12 BOLT (1/4-NC X 1/2") 4 SCREW (M8-1.25 X 60MM) 4 LOCK WASHER (5/16") 1 FAN 15.5" 30 DEG 1 FAN SPACER 1.39" 1 HOSE (12JFX90L-32"-300) 1 HOSE (12JFX90L-18.5"-300) 1 RIGHT GRILL MOUNT 1 LEFT GRILL MOUNT 1 FAN GUARD 5 BOLT (1/4-NC X 7/8") 2 CONNECTOR (12J-12S45) 5 LOCK WASHER (1/4) 1 NUT (1/4-NC) 1 "OBS" ENGINE - T2 DEUTZ F3M2011

194-523 362-986 115-399 105-095 105-174 106-570 105-091 195-1001 179-833 159-803 159-804 323-988 323-987 362-1475 105-342 154-047 105-079 105-078 195-1063

DESCRIPTION

REMARKS

USE 8 @ 3"

SEPERSEDES P/N 194-524.

BEGINS WITH S/N, SEE FOOTNOTE 2 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. WHEN REPLACING FAN GUARD WITH NEWER STYLE, HAVING 5/16" WIRE MOUNTS, DISCARD 105-820 BOLTS AND USE 105-342 BOLTS. 2. WHEN REPLACING FAN GUARD 362-998, WITH 4 MOUNTING POINTS, ORDER KIT 191-1106.

NOTE:

04

ID0228905

26

FUEL TANK AND LINES BEGINS WITH S/N CMWRT45XAG0003214 8

27 28 10 9 5

17

30

5 5 16

18

19

3

5

3 5

13

29

12

1

6 36

31 35

14

6

33 35

36 33

33

33

6 12

32

RETURN FUEL 4

32 34 6

34

FUEL SUPPLY TO ENGINE

26

PRIOR TO S/N CMWRT45XHF002680 - SEE FOOTNOTE 2 3500 14 6 3610 3700 6 RT36 6 RT40 12 RT45 RETURN FUEL 4 11

24

26 21

21 25 25

22

24

4

2

6

15 23

11 6

7

22

12

CROSSOVER TUBE

TO FUEL INLET

USE WITH 3610 & RT36

20

13

ID0021021

27

FUEL TANK AND LINES BEGINS WITH S/N CMWRT45XAG0003214 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

QTY

DESCRIPTION

105-214 6 FLG SCREW (#10-24 X 1/2") 110-030 2 CABLE TIE (1/16" to 4") 110-134 2 WORM CLAMP (2.06" TO 2.75") 110-212 2 CONDUIT CLAMP (5/16") 110-217 6 WORM CLAMP (7/16" TO 1") 110-249 5 WORM CLAMP (1/4" TO 5/8") 110-348 1 POP RIVET (3/16" X .664") 195-3102 1 CAP, DIESEL FUEL VENTED 116-322 AR BULK HOSE (1/2", SOLD PER 1") 362-580 1 FILLER NECK 364-659 1 FILLER NECK 11. 156-239 2 S/O SHUT-OFF (02N-05H90) 12. 116-108 AR BULK HOSE (5/16", SOLD PER 1") 13. 217-517 1 FUEL SENDER 14. 159-983 1 S/O COUPLER (05H) 15. 156-926 1 FUEL SUPPLY LINE (16T) 16. 116-322 AR BULK HOSE (1/2", SOLD PER 1") 17. 116-323 1 FUEL HOSE (2" X 3") 18. 300-5017 1 STEP/FUEL TANK - RIGHT 19. 300-4965 1 STEP/FUEL TANK - LEFT 20. 116-203 1 GROMMET (9/16") 21. 110-333 2 BOLT-ON CLAMP (1") 22. 110-353 4 WORM CLAMP (3/4" X 1-1/2") 23. 150-4291 AR BULK HOSE (1", SOLD PER FT) 24. 358-558 2 BRACE PLATE 25. 105-825 4 FLG LK BOLT (3/8-NC X 3/4") 26. 105-834 2 FLG LOCKNUT (3/8-NC) 27. 364-663 1 FILLER NECK SCREEN 28. 155-708 1 O-RING (218 D90) 29. 116-322 AR BULK HOSE (1/2", SOLD PER 1") 30. 156-729 1 S/O TEE (08H-08H-08H) 31. 165-704 1 GASKET 32. 105-1142 AR BULK HOSE (3/8", 225 PSI, SOLD PER FT) 33. 110-217 4 WORM CLAMP (7/16" TO 1") 34. 150-1381 2 S/O COUPLER (05H-06H) 35. 156-269 2 STREET ELBOW (06N-06NF90) 36. 514-369 2 S/O COUPLER (06N-06H)

REMARKS

SEE FOOTNOTE 1

110-485 ENDS WITH S/N_______ USE 1 @ 11"

USE 2 @ 35"

USE 1 @ 3", SEE FOOTNOTE 1

USE WITH 3610 & RT36

USE 2 @ 15" 3700 W/DANA 60 ONLY 3700 W/DANA 60 ONLY 3700 W/DANA 60 ONLY

USE 1 @ 42", SEE FOOTNOTE 1 SEE FOOTNOTE 1 USE 2 @ 3"

NOT SHOWN:

FOOTNOTES:

1. NEWER MODELS HAS LEFT SIDE FUEL TANK VENT. FOR OLDER MODELS, W/O LEFT FUEL TANK VENT, REF. #32 WILL BE DELETED, 43" HOSE LENGTH IS REQUIRED AND REF. #5 QTY WILL BE REDUCED TO A QTY. OF 2.

2. WHEN REPLACING 300-5017 AND 300-4965 FUEL TANKS ON THESE UNITS, USE ITEMS 32-36.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

13

ID0021021

28

COLD START KIT

6 7

8

3 4 2

1

06

ID0032031

29

COLD START KIT REF PART NO. NUMBER

1 2 3 4 6 7 8

191-432 215-061 213-245 105-185 106-048 213-277 217-020 211-317

QTY

1 1 1 1 1 1 1

DESCRIPTION

COLD START KIT HEATER PLUG BASE/PEDESTAL BOLT (#10-24 X 1/2", RD SLT) LOCKNUT (#10-24) INSERT (YELLOW) PREHEAT PILOT LIGHT BK/AMI 50 AMP FUSE

REMARKS

INCLUDES REF NO.'S 2 - 7 SEE FOOTNOTE 2 SEE FOOTNOTE 1

NOT SHOWN:

213-215 273-459

1 HARNESS, COLD START INCLUDES TIMER 1 NOTICE EXPLOSION POSSIBLE (MOUNT NEAR ENGINE AIR INTAKE

FOOTNOTES:

1. REF. #2 (BASE/PEDESTAL) MOUNTS TO LEFT SIDE OF FIREWALL 2. HEATER PLUG 215-061 MUST BE ORDERED SEPERATLY, IF REQUIRED.

NOTE:

06

ID0032031

30

NOTES:

ID0134963

31

POWER TRAIN

ID0135064

32

GROUND DRIVE GEARBOX

6

8

15 7

17 1

12

5 22

23 23

2

24

18 16

8

11

4

3

13 9

8

6

15

19 14

10

5 8

21 20

DANA 60

22 DIFFERENTIAL SIDE

22

12

ID0110655

33

GROUND DRIVE GEARBOX REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15 16.

17.

18.

19.

20.

21.

22.

23.

24.

105-069 105-072 105-805 105-062 105-121 106-794 105-238 105-483 106-962 105-825 105-848 115-211 125-049 155-806 165-100 168-003 167-139 167-293 169-012 169-013 169-068 169-014 169-069 500-228 105-995 105-362 158-943 500-658 149-112 105-575 116-672 155-851 157-569 110-333 156-926

QTY

1 8 8 2 2 8 8 6 6 8 1 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1

DESCRIPTION

WASHER (.406") LOCK WASHER (3/8") BELLEVILLE WASHER (3/8") FLG BOLT (1/2-NC X 1-1/2", FER) BOLT (1/2-NC X 1") BOLT (3/8-NC X 1-3/4", SOC) BOLT (3/8-NC X 1-1/2", SOC) BOLT (9/16-NC X 1-1/4") FLG BOLT (9/16-NC X 1-1/4",FER) FLG LK BOLT (3/8-NC X 3/4") BOLT (3/8-NC X 3/4 ", GD8) PLUG (08N, SQ, MAG) BALL BEARING (2.165") INTERNAL SEAL (1.750") LARGE GEAR PINION GEAR (19T) OUTPUT SHAFT (14T) OUTPUT SHAFT (14T) GEARBOX COVER MOUNTING PLATE MOUNTING PLATE FLANGE (1.750"-26S) FLANGE (1.148"-29S) INTERNAL SNAP RING (1.562") FLG LOCKNUT (3/4-NF) FLG NUT (7/8-NF) HYDRAULIC MOTOR SEAL REPAIR KIT HYDRAULIC MOTOR ROLL PIN (.500" X 1.250") INTERNAL SNAP RING (2.875") INTERNAL SEAL (1.552") INTERNAL SEAL 1.875") BOLT-ON CLAMP (1") FUEL SUPPLY LINE (16T)

REMARKS

DANA 60 DANA 60 LOCTITE DANA 60, LOCTITE DANA 60 LOCTITE

DANA 60 SEE FOOTNOTE 1 DANA 60 DANA 60 LOCTITE DANA 60, LOCTITE USED WITH 3700 DANA 44 USED WITH 3700, 5700 DANA 60 DANA 60.

DANA 60 SEE FOOTNOTE 2 DANA 60

NOT SHOWN:

FOOTNOTES:

1.

2.

USE SILICONE (RTV) GASKET MATERIAL ON GEAR BOX COVER, ON MOTOR MOUNTING SURFACES, & AT MOUNTING PLATE TO DIFFERENTIAL HOUSING SURFACE. INSTALL SNAP RING (REF NO 24) IN GEAR BOX MOUNTING PLATE BEFORE PLATE IS BOLTED TO DIFFERENTIAL HOUSING.

NOTE:

12

ID0110655

34

35

36

DRIVE LINE

10 2 3

1 4

8 11 5

6

7

12 9

07

ID0123168

37

DRIVE LINE REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12

1 FLANGE YOKE (1.088"-14S) 1 YOKE (1.125"-SQ) 1 DRIVE SHAFT 1 WASHER (1/2") 1 FLG LK BOLT (3/8-NC X 1") 1 LOCK WASHER (3/8") 1 FLG LOCKNUT (3/4-NF) 1 YOKE (1.125"-SQ) 1 YOKE (1.062"-26S) 1 LOCK WASHER (1/2") 1 BOLT (1/2-NF X 3/4") 2 CROSS/BEARING KIT (1-1/8")

182-135 180-711 167-137 105-398 105-826 105-072 105-995 180-729 180-778 105-070 105-875 180-723

DESCRIPTION

REMARKS

FOR DANA 44 AXLES

FOR DANA 44 AXLES, SEE FOOTNOTE 1.

FOR DANA 44 AXLES, SEE FOOTNOTE 1.

INCLUDES 1X 115-010 ZERK (02N22.5), & 4X 180-760 BEARING CAP (1-1/8").

NOT SHOWN:

FOOTNOTES:

1. FOR OPTIONAL HD DANA 60 AXLES USE 1X 182-020 YOKE (1.184"-29S), & 1X 105-362 FLG NUT (7/8-NF).

NOTE:

07

ID0123168

38

FRONT DIFFERENTIAL MOUNT BEGINS WITH S/N:

20 19 18

21

1 13

17 7 10

16 15 8

5 4

14 6 22

9 12 2 3

01

11

ID0752269

39

FRONT DIFFERENTIAL MOUNT BEGINS WITH S/N: REF PART NO. NUMBER

QTY

1 313-556 2 115-499 3 105-357 4 178-295 5 363-438 6 105-462 7 178-296 8 125-770 9 125-403 10 125-771 11 160-377 12 105-404 13 105-970 14 105-994 15 107-594 16 107-595 17 115-483 18 300-11325 19 300-11322 20 105-884 21 105-1275 22 160-408

1 DIFFERENTIAL MOUNT 2 KLIP RING (1.000") 2 LOCKNUT (5/8-NC, GR C, PRV TQ) 1 PIN (1.0" X 3.2"") 1 MOUNT BRACKET 2 BOLT (5/8-NC X 2.25" GR. 5) 1 PIN (1.25" DIA X 3.91" LG) 1 COMPOSITION BUSHING (1.000") 2 BRONZE BUSHING (.625") 5 COMPOSITION BUSHING (1.25") 2 TIE ROD CLEVIS (3/4-NF) 2 JAM NUT (3/4-NF) 6 FLG BOLT (5/8-NC X 1-3/4,GD8) 6 FLG LOCKNUT (5/8-NC, GR G) 4 WASHER (.406", HARDENED) 4 BOLT (3/8-NC X 1", GD8) 4 KLIP RING (1.250") 2 PIVOT PIN 2 TAB 2 WASHER (1/2") 4 BOLT (1/2-NC X 1", GR 8) 1 TIE ROD

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0752269

40 ENDS WITH S/N:

07

ID0110656

41

07

ID0110656

42

FRONT DIFFERENTIAL

AND REAR STEER DIFFERENTAIL DANA 44

14 SEE FOOTNOTE 3 SEE FOOTNOTE 2

18 19

2 6

4

1 11

20

8

12 7

10 8

16

15

13

7

10

9 17 KING PIN ASS'Y 4 PLACES SCALE 2X

9 21 5

SEE FOOTNOTE 1

3

06

ID0110657

43

FRONT DIFFERENTIAL

AND REAR STEER DIFFERENTAIL DANA 44 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

QTY

105-114 10 105-230 10 105-364 4 105-410 2 105-422 4 105-518 2 125-1065 4 157-503 2 125-735 8 155-808 4 160-117 2 160-415 2 160-402 1 160-403 1 161-135 1 161-136 1 161-199 1 161-138 1 180-279 2 181-552 4 182-084 2 182-087 2 115-002 115-500 205-671 2 105-451 AR

DESCRIPTION

LUG NUT (1/2-NF) LUG BOLT (1/2-NF X 1-1/2") LK BOLT (3/4-NF X 2", NLK) CASTLE NUT (3/4-NF) WASHER (3/4") COTTER PIN (1/8" X 1-1/2") TAPERED BEARING SET (2.250") INTERNAL SEAL (1.313") URETHANE FLANGE BUSHING (1") INTERNAL SEAL (3.000") SPINDLE FLANGE SPINDLE SHAFT RIGHT SPINDLE HOUSING LEFT SPINDLE HOUSING LONG AXLE SHORT AXLE REAR DIFF HSG (DANA 44 LS) FRONT DIFF HSG (DANA 44LS) SPINDLE WASHER (3/4") COMPOSITION BUSHING (.750") YOKE (1.209"-30S) CROSS/BEARING KIT (1-1/4") ZERK (02N90) INTERNAL SNAP RING (1.343") HUB CAP (1.982") SPRING WASHER (3/4")

REMARKS

SEE FOOTNOTE 3

SUPERCEDES 125-260 & 125-261

INCL REF NO. 2. SEE FOOTNOTE 2 SEE FOOTNOTE 2

SEE FOOTNOTE 4.

SEE FOOTNOTE 4.

INCL REF NO. 22 INCL REF NO. 22

SEE FOOTNOTE 1

FOOTNOTES

1. KING PIN ASSEMBLY: INITIALLY INSTALL 4 WAVE WASHERS (PER JOINT), TORQUE THE KING PIN BOLT 220-250 FOOT POUNDS; CHECK GAP BETWEEN FLATWASHER AND FLANGED BUSHING= .005" TO .020"; REMOVE OR ADD WAVE WASHER(S) AS REQUIRED FOR GAP; REMOVE KING PIN BOLT, LOCTITE, AND TORQUE 220-250 FOOT POUNDS. 2. BEFORE INSTALLING WHEELS ON TRACTOR, CLEAN LUG NUT CONICAL SEAT TO REMOVE PAINT; CLEAN WHEEL MOUNTING SURFACES (AXLE OR SPINDLE FLANGE AND WHEEL CENTER DISC) TO REMOVE PAINT. 3. TORQUE LUG NUTS (1/2-20 UNF) IN A CROSS PATTERN TO A FINAL TORQUE OF 150 FOOT POUNDS. 4. SEE PARTS PAGE 805-333 FOR AXLE SHAFT AND STEARING LINKAGE.

06

ID0110657

44

FRONT DIFFERENTIAL MOUNT - DANA 60 HD BEGINS WITH:

5

4

13 7 2 10 11 12

9 1

6

3 8 14 01

ID0752203

45

FRONT DIFFERENTIAL MOUNT - DANA 60 HD BEGINS WITH: REF PART NO. NUMBER

QTY

1 313-165 2 313-163 3 301-822 4 105-975 5 105-464 6 105-502 7 125-771 8 105-953 9 300-11325 10 300-11322 11 105-884 12 105-1275 13 115-483 14 180-322

2 AXLE MOUNT SPACER 1 DIFFERENTIAL MOUNT 2 SADDLE CLAMP 4 WASHER (3/4") 4 BOLT (3/4-NC X 7", GD8) 1 COTTER PIN (3/16" X 2") 3 COMPOSITION BUSHING (1.25") 4 LOCKNUT (3/4-NC, GR C, PRV TQ) 2 PIVOT PIN 2 TAB 2 WASHER (1/2") 4 BOLT (1/2-NC X 1", GR 8) 2 KLIP RING (1.250") 1 PIN

DESCRIPTION

REMARKS

TORQUE TO 375 FT LBS

USE LOCTITE 277 OR EQUIVALENT

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0752203

46

ENDS WITH S/N:

06

ID0134289

47

06

ID0134289

48

FRONT DIFFERENTIAL DANA 60 HD

7

5 4 1

32

9

3

33 8 6

19

14

13

7

25

16

28 20

11 24

15 1

2 22 23

7

16

22 3

26

7 11

30 23

10

25

18

12 27

17 31

10 29 21

06

ID0134290

49

FRONT DIFFERENTIAL DANA 60 HD REF PART NO. NUMBER

QTY

161-279 1. 161-153 2 2. 160-418 1 3. 184-143 2 4. 181-981 2 5. 105-874 2 6. 183-584 2 7. 160-306 2 105-405 105-509 8. 161-230 1 9. 182-020 1 10. 160-160 2 105-426 11. 115-005 2 12. 182-099 2 115-002 13. 301-151 4 190-273 2 14. 105-825 4 15. 125-301 4 16. 105-404 2 17. 105-349 2 18. 105-424 10 19. 105-353 4 20. 105-451 AR 21. 105-516 2 22. 125-1065 4 23. 105-716 4 24. 125-716 8 25. 155-808 4 26. 160-187 2 27. 160-336 2 28. 180-061 4 29. 181-381 2 30. 182-103 2 31. 205-671 2 32. 105-362 1 33. 155-853 1

DESCRIPTION

FT DIFF PT ASS'Y (DANA 60 HDLS) SPINDLE HOUSING TIE ROD TAPERED INSERT (.750") TAPERED INSERT (1") FLG LK BOLT (3/8-NC X 1-1/2") TAPERED PIN (1" X 2.44") TIE ROD END (3/4-NF) CASTLE NUT (9/16-NF) COTTER PIN (1/8" X 1") FRONT DIFF HSG (DANA 60 HD LS) YOKE (1.184"-29S) SPINDLE FLANGE (1.573", 26S) LUG BOLT (3/4-NF X 1-13/16") ZERK (1/4-NF, 90) CROSS/BEARING KIT (1-17/32") ZERK (02N90) SPINDLE BOLT LOCK SPINDLE BOLT CONVERSION KIT FLG LK BOLT (3/8-NC X 3/4") COMPOSITION BUSHING (.750") JAM NUT (3/4-NF) CASTLE NUT (1-NF) LUG NUT (3/4-NF) BOLT (3/4-NF X 2-5/8",NLK GD8) SPRING WASHER (3/4") ROLL PIN (3/16" X 1-1/2") TAPERED BEARING SET (2.250") SET SCREW (3/8-NC X 1/2") FLANGE BUSHING (1.000") INTERNAL SEAL (3.000") FRONT AXLE SHAFT (15.62", 35T) SPINDLE SHAFT & YOKE SPINDLE WASHER (.750") SPINDLE WASHER (1.000") AXLE YOKE (1.416", 35S) HUB CAP (1.982") FLG NUT (7/8-NF) INTERNAL SEAL (1.875")

REMARKS

INCL REF NO'S 1 - 3, 7 - 17, 19 - 34 SEE FOOTNOTE 1

SEE FOOTNOTE 2 & 3 INCL LUG BOLTS

INCL ZERK

INCL REF NO'S 13- 15, 19, 20, 24 & 28;

SEE F/N 4

SUOERCEDES 125-260 & 125-261

FOOTNOTES

1. LOCTITE INSERT (REF NO 3) INTO ARM OF SPINDLE HOUSING. 2. REFER TO DIFFERENTIAL ASSEMBLY INSTRUCTIONS 052-185.

3. REF NO 8, FRONT AXLE HOUSING, INCLUDES DIFFERENTIAL ASSEMBLY, GEARS, BEARINGS, AXLE SEALS & ETC. LESS AXLE SHAFTS, SPINDLES & ETC. 4. REFER TO INSTALLATION DIAGRAM 050-946

06

ID0134290

50

51

52

53

54

REAR STEER DIFFERENTIAL MOUNT DANA 60HD

7

5

9

4

8

2

1

3 4

02

6

ID0026660

55

REAR STEER DIFFERENTIAL MOUNT DANA 60HD REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

161-282 313-188 301-822 106-949 105-464 105-953 105-970 180-322 105-502

QTY

1 2 2 8 4 4 4 1 1

DESCRIPTION

REMARKS

RR DIFF PTS ASS'Y (DANA 60 HDLS) SPACER MOUNT SADDLE CLAMP (3.500) WASHER (3/4" HARDENED) BOLT (3/4-NC X 7", GD8) LOCKNUT (3/4-NC) FLG BOLT (5/8-NC X 1.750",GD8) PIN (1.25" X 3.50") COTTER PIN (3/16" X 2")

SEE FOOTNOTE 3

SEE FOOTNOTE 1 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. LOCTITE (RC 271 OR RC 272) & TORQUE TO 375 FT. LBS., HOLD BOLT & TORQUE NUT. 2. LOCTITE (RC 271 OR RC 272) & TORQUE TO 250 FT. LBS. 3. FOR MORE INFORMATION SEE PARTS PAGE TITLED "REAR STEERABLE DIFFERENTIAL, HD DANA 60" (804-661)

NOTE:

02

ID0026660

56

REAR STEER DIFFFERENTIAL DANA 60

SEE FOOTNOTE 4 7

5 4 1 23

3

32

8 6

19

14

13

7

25

16

28 20

11 24

15 1

2 22 16

9

26

7

22 3 7 11

30

10

25

18

9 12 27

17 31

10 29 21

05

ID0134742

57

REAR STEER DIFFFERENTIAL DANA 60

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

QTY

161-282 161-153 2 160-418 1 184-143 2 181-981 1 105-874 1 183-584 1 160-306 2 105-405 105-509 161-233 1 105-716 2 160-160 2 105-426 115-005 2 182-099 2 115-002 301-151 4 105-825 4 125-301 4 105-404 2 105-349 2 105-424 10 105-353 4 105-451 AR 105-516 2 125-1065 4 157-569 1 125-716 8 155-808 4 160-187 2 160-336 2 180-061 4 181-381 2 182-103 2 205-671 2 105-362 1

DESCRIPTION

REMARKS

RR DIFF PTS ASS'Y (DANA 60 HDLS) SPINDLE HOUSING TIE ROD TAPERED INSERT ( .750") TAPERED INSERT (1") FLG LK BOLT (3/8-NC X 1-1/2") TAPERED PIN (1.000" X 2.440") TIE ROD END (3/4-NF) CASTLE NUT (9/16-NF) COTTER PIN (1/8" X 1") REAR DIFF HSG (DANA 60 HDLS) SET SCREW (3/8-NC X 1/2") SPINDLE FLANGE (1.573", 26S) LUG BOLT (3/4-NF X 1-13/16") ZERK (1/4-NF, 90) CROSS/BEARING KIT (1-17/32") ZERK (02N90) SPINDLE BOLT LOCK FLG LK BOLT (3/8-NC X 3/4") COMPOSITION BUSHING (.750") JAM NUT (3/4-NF) CASTLE NUT (1-NF) LUG NUT (3/4-NF) BOLT (3/4-NF X 2-5/8",NLK GD8) SPRING WASHER (3/4") ROLL PIN (3/16" X 1-1/2") TAPERED BEARING SET (2.250") INTERNAL SEAL (1.875") FLANGE BUSHING (1.000") INTERNAL SEAL (3.000") FRT AXLE SHAFT (15.62"; 35T) SPINDLE SHAFT & YOKE SPINDLE WASHER (.750") SPINDLE WASHER (1.000") AXLE YOKE (1.416", 35S) HUB CAP (1.982") FLG NUT (7/8-NF))

INC REF NO'S 1-3, 7-17, 19-32

SEE FOOTNOTE 1

SEE FOOTNOTE 2. 3

SUPERCEDES 125-260 & 125-261 SEE FOOTNOTE 4

FOOTNOTES

1. LOCTITE INSERT (REF #3) INTO ARM OF SPINDLE HOUSING. 2. REFER TO DIFFERENTIAL ASSEMBLY INSTRUCTIONS 052-185.

3. ITEM REF. 8, REAR AXLE HOUSING, INCLUDES DIFFERENTIAL ASSEMBLY, GEARS, BEARINGS, AXLE SEALS, ETC. LESS AXLE SHAFTS, SPINDLES, ETC. 4. FOR MORE INFORMATION SEE PARTS PAGE TITLED "GROUND DRIVE GEAR BOX DANA 60" ID0134697-(804-641)

05

ID0134742

58

CARRIER

DANA 44 LIMITED SLIP

24 13

5

23

19 16

1

14 18

8 3

15

20

7 4

25

2 10 29 11

6

22 25

28 9

20

28 17 27

12

3

29 10 25 26

6

21

03

ID0026661

59

CARRIER

DANA 44 LIMITED SLIP REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

QTY

125-251 1 125-252 1 125-266 2 125-289 1 125-291 1 125-293 2 155-851 1 161-138 1 161-111 1 161-197 1 161-199 1 161-238 161-240 161-241 161-242 165-618 1 501-126 2 501-274 1 501-284 1 501-286 1 501-294 1 105-995 1 501-296 1 501-297 10 501-298 AR 501-299 AR 501-300 AR 501-301 AR 501-302 AR 501-303 AR 501-304 AR 501-305 AR 501-306 AR 501-307 AR 501-308 AR 501-325 10 157-503 2 501-569 1 501-373 1 501-592 2 2 1 2 2

DESCRIPTION

TAPERED RACE (3.000") TAPERED RACE (2.875") TAPERED RACE (3.265") TAPERED BEARING (1.125") TAPERED BEARING (1.375") TAPERED BEARING (1.796") INTERNAL SEAL (1.552") FRONT DIFF HSG (DANA 44 LS) REAR DIFF HSG (DANA 44 LS) REAR DIFF HSG (DANA 44 LS) REAR DIFF HSG (DANA 44 LS) REAR DIFF HSG (DANA 44 LS) REAR DIFF HSG (DANA 44 LS) REAR DIFF HSG (DANA 44 LS) FRONT DIFF HSG (DANA 44 LS) COVER GASKET CUP WASHER (.812") CARRIER PARTS ASS'Y DIFFERENTIAL COVER RING GEAR & PINION SET OIL SLINGER (1.126") FLG LOCKNUT (3/4-NF) WASHER (.770") BOLT (3/8-NF X 3/4") PINION SHIM (.003") PINION SHIM (.005") PINION SHIM (.010") PINION SHIM (.030") PINION SHIM (.003") PINION SHIM (.005") PINION SHIM (.010") CARRIER SHIM (.003") CARRIER SHIM (.005") CARRIER SHIM (.010") CARRIER SHIM (.030") FLG LK BOLT (5/16-NC X 5/8") INTERNAL SEAL (1.313") OIL SLINGER OIL SLINGER CLUTCH PACK RETAINER RING PINION GEAR SHAFT SIDE GEAR PINION GEAR

REMARKS

3500, 3610, 3700, RT36, & RT40; SEE FOOTNOTE 1 3500, 3700, & RT40; SEE FOOTNOTE 1 3610 & RT36; SEE FOOTNOTE 1 3500, 3700, & RT40; SEE FOOTNOTE 1 3610 & RT36; SEE FOOTNOTE 3 3500, 3700, & RT40; SEE FOOTNOTE 3 3500, 3700, & RT40; SEE FOOTNOTE 3 3500, 3610, 3700, RT36, & RT40; SEE FOOTNOTE 3

INCL REF NO'S 10 & 25 - 29 INCL REF NO. 15

SEE FOOTNOTE 2

NO LONGER AVAILABLE NO LONGER AVAILABLE NO LONGER AVAILABLE NO LONGER AVAILABLE

NOT SHOWN:

FOOTNOTES:

1. INCLUDES: AXLE TUBES & DIFFERENTIAL CENTER CASTING, & REF NO'S 1-7; 9-29; LESS AXLE SHAFTS. 2. USED IN STEERABLE AXLES ONLY; REFER TO ASSEMBLY INSTRUCTIONS 052-183 3. INCLUDES AXLE TUBES, DIFF. CENTER SECTION CASTING, DIFF. BEARING CAPS, AND BOLTS. STEERABLE AXLE HOUSINGS INCLUDE (2) P/N 157-503 AXLE SEALS; LESS GEARS, BEARINGS, HOUSING COVER, AND AXLE SHAFTS. NOTE:

03

ID0026661

60

DIFFERENTIAL

DANA 60 HD LIMITED SLIP

21 25 2

10 27

8

76

9 20

5 13

14

19

5 17 1 26

4 24

23

23 11

13

15

22 12

3

18 17 19

24

4

16

09

ID0026651

61

DIFFERENTIAL

DANA 60 HD LIMITED SLIP REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

QTY

105-002 4 105-362 1 105-516 1 125-1066 2 155-807 4 125-285 1 125-286 1 125-295 1 125-296 1 155-853 1 157-569 1 161-230 1 161-232 1 161-234 1 161-233 1 161-283 1 161-285 1 161-286 1 161-284 1 165-613 1 501-142 AR 501-143 AR 501-144 AR 501-145 AR 501-149 1 501-150 12 501-153 10 501-160 2 501-161 1 501-162 2 501-163 AR 501-164 AR 501-165 AR 501-166 AR 501-167 AR 501-168 AR 501-169 AR 501-287 1 501-766 2 501-341 1 501-767 1 161-278 1 501-425 1

DESCRIPTION

BOLT (1/2-NC X 2-1/4") FLG NUT (7/8-NF) ROLL PIN (3/16" X 1-1/2") TAPERED BEARING SET (2.250") INTERNAL SEAL (1.500") TAPERED BEARING(1.250") TAPERED RACE (2.875") TAPERED BEARING (1.625") BEARING RACE (3.500") INTERNAL SEAL (1.875") INTERNAL SEAL (1.875") FRONT DIFF HSG (DANA 60 HD LS) FRONT DIFF (DANA 60 HD LS) REAR DIFF HSG (DANA 60 HD LS) REAR DIFF HSG (DANA 60 HD LS) FRONT DIFF HSG (DANA 60 HD LS) REAR DIFF HSG (DANA 60 HD LS) REAR DIFF HSG (DANA 60 HD LS) REAR DIFF HSG (DANA 60 HD LS) COVER GASKET SHIM (.003") SHIM (.005") SHIM (.010") SHIM (.032") OIL SLINGER (1.258") BOLT (1/2-NF X 1-1/8") FLG LK BOLT (3/8-NC X 5/8") SPIDER GEAR SPIDER SHAFT PINION GEAR SHIM (.032") SHIM (.003") SHIM (.005") SHIM (.010") SHIM (.030") SHIM (.003") SHIM (.005") SHIM (.010") DIFFERENTIAL COVER AXLE GEAR (1.5" , 35S) CLUTCH PACK RING GEAR & PINION (5.86:1) DIFFERENTIAL CARRIER (LMT-SLP) OIL BAFFLE

REMARKS

LOCTITE (RED RC271 / RC272) SUPERCEDES 125-260 & 125-284

FRONT ONLY 3500, 3700, & RT40 REAR W/GEARS; SEE F/N 2; 3500,3610,3700,RT36,RT40 INCL REF #28 W/GEARS; SEE F/N 2; 3500, 3700, & RT40 W/GEARS; SEE F/N 2; 3610 & RT36 W/GEARS; SEE F/N 2; 3500, 3700, & RT40 INCL REF #28 W/O GEARS; SEE F/N 3; 3500,3610,3700,RT36,RT40 INCL REF #28 W/O GEARS; SEE F/N 3; 3500, 3700, & RT40 W/O GEARS; SEE F/N 3; 3610 & RT36 W/O GEARS; SEE F/N 3; 3500, 3700, & RT40 INCL REF #28

INCL REF NO'S 2,6-10,12,13,15,20,21, & 27.

INCL REF NO'S 3,17-19,23 & 24 FRONT

FOOTNOTES:

1.

2.

3.

REFER TO ASSEMBLY INSTRUCTIONS 052-184 INCLUDES AXLE TUBES, DIFFERENTIAL CENTER CASTING, & REF NO'S 1-9, 12-28.

LESS PINION SEAL & AXLE SHAFTS. INCLUDES AXLE TUBES, DIFFERENTIAL CENTER CASTING, & REF NO 1 BOLTS, & DIFF CASE BEARING CAPS. STEERABLE AXLE HOUSINGS INCL (4) P/N 155-807 SEALS; LESS PINION SEAL, GEARS, BEARINGS, HOUSING COVER, & AXLE SHAFTS.

NOTE:

09

ID0026651

62

REAR AXLE - DANA 60 H.D. OPTION

FOOTNOTE 2

1

2

3 4 10 9 8 11 12 6, 7 5

03

ID0133455

63

REAR AXLE - DANA 60 H.D. OPTION REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

QTY

161-232 1 105-970 4 105-994 4 155-856 2 115-533 2 161-271 1 161-272 1 125-024 2 115-520 2 181-049 2 105-426 10 105-424 10

DESCRIPTION

REMARKS

REAR AXLE HOUSING (DANA 60 H.D.OPTION) SEE FOOTNOTE 1 & 2 FLG. BOLT (5/8-NC X 1-3/4") FLG. LOCKNUT (5/8-NC) SEAL (1-7/8 ID X 2-1/2 OD) INTERNAL SNAP RING SHORT AXLE, 23.5" RECOMMENDED REPLACEMENT OF REF NO.'S 8-11 LONG AXLE, 24.5" RECOMMENDED REPLACEMENT OF REF NO.'S 8-11 BEARING EXTERNAL SNAP RING SHRINK RING WHEEL STUD (3/4 NF) LUG NUT (3/4 NF)

NOT SHOWN:

FOOTNOTES:

1. INCLUDES AXLE HOUSING WITH MOUNTS, DIFFERENTIAL ASSEMBLY, GEARS, & BEARINGS. LESS AXLES SHAFTS & SEALS. 2. SEE PARTS PAGES ENTITLED "DIFFERENTIAL, DANA 60 H.D. OPTION" ID026651 FOR INTERNAL PARTS BREAKDOWN.

NOTE:

03

ID0133455

64

NOTES:

ID0134963

65

FRAME COMPONENTS

ID0135068

66

HOOD AND PANELS

26 25 18 20 19

22 24

23 27 11

21 8

10 16 17

7

9 9 5 4

15

3

1

2 14 6

12 13

03

ID0229275

67

HOOD AND PANELS REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

1 RIGHT GRILL MOUNT 1 LEFT GRILL MOUNT 2 CLIP NUT (3/8-NC) 1 RADIATOR FLAP 2 FLG LK BOLT (3/8-NC X 3/4) 1 LEFT FRONT SIDE PLATE 1 RIGHT FRONT SIDE PLATE 1 RADIATOR TOP BRACE 8 CLIP NUT (5/16-NC) 1 BULK STRIP (3/4" X .25"THK, SOLD PER 1") 1 HOOD LINER 4 FLG LK BOLT (3/8-NC X 1") 4 FLG LOCKNUT (3/8-NC) 6 FLG LK SCREW (M8-1.25 X 16MM) 4 FLG LK BOLT (5/16-NC X 5/8") 1 GRILLE 4 FLG LK BOLT (5/16-NC X 1") 1 HOOD (ORANGE) 4 DRAW LATCH 16 POP RIVET (5/32" X .385") 1 AIR BOX 2 CARRIAGE BOLT(3/8-NC X 1-1/4") 2 NUT (3/8 NC) HEX 2 LOCK WASHER (3/8") 2 POP RIVET (3/16" X .690") 2 WASHER (.191") 1 BULK EDGE (SOLD PER FOOT)

323-988 323-987 107-011 118-196 105-825 323-985 323-986 323-1001 105-137 115-399 118-201 105-826 105-834 106-380 501-325 324-749 105-873 362-1442 118-299 110-468 362-996 105-249 105-053 105-072 110-449 106-205 118-183

DESCRIPTION

REMARKS

USE 22" USE AS NEEDED

OPTIONAL HOOD SEE NOT SHOWN NOTE SEE NOTE 1

NOT SHOWN:

362-1444

1

HOOD (UNPAINTED)

FOOTNOTES:

NOTE:

1. MAKE CERTAIN AIR HOSE IS INSERTED INTO AIR BOX WHEN HOOD IS MOUNTED OR HEATED AIR WILL BE TAKEN INTO THE ENGINE.

03

ID0229275

68

LEFT FENDER AND COVERS

7

22 10

22

TO STARTER 16 31

11 6

2

8

28 21

23

20

29 24

37

9 27

1 36

26 18

38

5

13

4 3 12 2

18

14 15

30

43 41 42 44 40 32 33 35

17 25

15 14

18

39

34 26

19

02

ID0229278

69

LEFT FENDER AND COVERS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

QTY

DESCRIPTION

307-746 1 LEFT REAR FENDER 105-826 4 FLG LK BOLT (3/8-NC X 1") 105-827 3 FLG LK BOLT (3/8-NC X 1-1/4") 106-039 2 NUTSERT (3/8-NC) 362-582 1 LEFT ROPS MOUNT COVER 362-823 1 COVER 105-836 6 FLG LK BOLT (1/4-NC X 1/2") 105-832 6 FLG LOCKNUT (1/4-NC) 110-541 1 HINGE (12-13/64") 324-451 1 BATTERY COVER 110-126 1 BOLT ON CLAMP (1/2") 502-001 1 GROMMET (3/8") 308-958 1 FENDER PROP ROD 105-508 2 COTTER PIN (3/32" X 1") 105-118 2 WASHER (3/8") 105-823 1 FLG LK BOLT (5/16-NC X 3/4") 300-1980 1 BATTERY TRAY 105-845 6 FLG LOCKNUT (3/8-NC) 105-825 2 FLG LK BOLT (3/8-NC X 3/4") 300-3681 1 HOLD DOWN PLATE 106-383 1 FLG LK SCREW (M10 X 30MM) 117-558 2 ADJUST LEVER LATCH (LOCKING) 214-961 KEY, PAIR (BASE CODE) 217-309 LOCK PLUG 4/LATCH (BASE CODE) 23. 105-003 1 FLG LK NUT (5/16-NC) 24. 215-3033 1 BATTERY, 12V 25. 116-789 AR RUBBER EDGE TRIM (1/8", SOLD PER FT) 26. 217-819 1 BATTERY DISCONNECT SWITCH 27. 215-381 1 BAT CABLE (1 GA X 12" , BLK) 28. 215-1150 1 BAT CABLE (1/0 GA X 68" , RED) 29. 115-374 AR BULK HOSE ( 3/4" , SOLD PER 1") 30. 213-376 1 BAT CABLE (1/0 GA X 14" , BLK) 31. 105-095 1 WASHER (1/4") 32. 215-1011 1 BUSSBAR (MAIN FUSE HOLDER) 33. 211-310 3 BK/AMI 60 AMP FUSE 34. 106-231 2 BOLT (M6-1.00 X 16MM) 35. 106-237 2 LOCKNUT 9M6-1.00, PRV TRQ, NLK 36. 105-826 1 FLG LK BOLT (3/8-NC X 1") 37. 105-1081 1 BATTERY HOLD DOWN 38. 115-686 AR BULK EDGE (5/32", SOLD PER 1") 39. 215-1009 1 MAIN FUSE HOLDER BASE 40. 215-1010 3 MAIN FUSE HOLDER COVER 41. 105-186 2 NUT (#10-24) 42. 105-053 1 NUT (3/8-NC) 43. 105-072 1 LOCKWASHER (3/8") 44. 106-205 2 WASHER (.191")

REMARKS

REMOVE FOR LIGHT KIT 191-429

USE 2.5", INSTALL WITH WEATHERSTRIP ADHESIVE.

USE 1 @ 65"

USE 1 @ 8.5"

FOOTNOTES:

NOTE:

02

ID0229278

70

JUMPER POST

1

5

4 TO STARTER 3

2

01

ID0370320

71

JUMPER POST REF PART NO. NUMBER

QTY

1 2 3 4 5

1 MOUNT BRACKET 1 BATTERY JUMPER TERMINAL (RED) 1 JUMP START POST CABLE 1GA X 16",(RED) 2 FLG SCREW (M8-1.25 X 20MM, GD8) 2 FLG LOCKNUT (M8-1.25)

302-0119 211-087 215-2152 106-162 106-386

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0370320

72

RIGHT FENDER AND COVERS 13 19 3 3

18 20

19

8 7

11

1 4

10

9

6 2

21 7 12

17

15 12

16

14

5

5

05

ID0027416

73

RIGHT FENDER AND COVERS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

QTY

323-685 1 105-823 4 105-873 4 105-827 5 105-831 2 105-841 4 107-011 10 159-169 1 106-039 2 323-684 1 323-605 1 107-425 6 323-686 1 313-172 1 115-704 AR 346-344 1 105-826 1 105-823 2 105-095 6 116-421 AR 115-704 AR

DESCRIPTION

LEFT SIDE PLATE FLG LK BOLT (5/16-NC X 3/4") FLG LK BOLT (5/16-NC X 1") FLG LK BOLT (3/8-NC X 1-1/4") FLG LK BOLT (1/2-NC X 1-1/2") CLIP NUT (5/16-NC) CLIP NUT (3/8-NC) PLUG (2", NYLON) NUTSERT (3/8-NC) RIGHT SIDE PLATE RIGHT REAR FENDER NUTSERT (3/8-NC) TUNNEL COVER STONE SHIELD BULK EDGE (1/4", SOLD PER 1") HOSE MOUNT FLG LK BOLT (3/8-NC X 1") FLG LK BOLT (5/16-NC X 3/4") WASHER (1/4") BULK EDGE (1/8", SOLD PER FOOT) BULK EDGE (1/4", SOLD PER 1")

REMARKS

USE 1 @ 4.5"

USE 1 @ 36" USE 2 @ 2.5"

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0027416

74

CONSOLE AND STEPS

5 10 6

10 2

11

1 4

13 8 12

3 7

14

9 14 3

10

01

4

ID0229293

75

CONSOLE AND STEPS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

QTY

105-284 4 184-820 4 105-827 10 105-834 4 105-1240 2 105-856 4 105-814 2 108-147 2 105-117 2 105-825 7 300-2591 1 328-466 1 105-085 4 105-845 3

DESCRIPTION

WASHER (3/16") SPACER FLG LOCK BOLT (3/8-NC X 1-1/4") FLG LOCKNUT (3/8-NC) FLOOR MAT BOLT (1/4-NC X 1 1/4") FLG LOCKNUT (3/8-NC) FLG LK BOLT (3/8-NC X 1-1/4") GR8 WASHER (5/16") FLG LK BOLT (3/8-NC X 3/4") MUFFLER HEAT SHIELD HEAT DEFLECTOR LK NUT (1/4-NC) FLG LK NUT (3/8-NC)

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. HEAT SHIELDS AND RELATED HARDWARE FOR SIDE-MOUNTED MUFFLERS

NOTE:

01

ID0229293

76

CONSOLE

24 2

9 10

11

12

23

8 4

13 3 7 5

18

6

21 15

22

17 16

14

15

20

19 1

05

ID0229507

77

CONSOLE REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

1 CONSOLE 1 JAM NUT (13/16-NF) 1 GAUGE MOUNT PANEL 4 SCREW (M6-1.00 X 20MM,BUT SOC) 2 INDICATOR DISPLAY 4 WELLNUT (M4-0.7 X 12.67MM LG) 4 SCREW (M4-0.70 X 16MM,BUT SOC) 1 HORN BUTTON 1 BUTTON COVER 1 COVER 1 VOLT METER 1 FUEL GAUGE 1 HOUR METER 1 ACCESSORY SOCKET 4 POP RIVET (3/16" X 1/2", ALUM) 1 ACCESS PANEL 2 SCREW (M6-1.00 X 14MM,BUT SOC) 4 WELLNUT (M6-1.00 X 20.35MM LG) 1 KEY SWITCH KIT WITH RELAY 4 FLG SCREW (M8-1.25 X 20MM, GD8) 4 FLG LOCKNUT (M8-1.25) 1 PLUNGER SWITCH 1 14" STEERING WHEEL (7/8" x 36 TH SPL) 1 CENTER CAP W/DW EMBLEM

362-992 105-361 300-5413 106-640 220-664 107-358 107-580 306-607 306-608 362-823 215-129 215-133 215-2594 214-301 110-560 324-380 105-1577 107-871 191-1032 106-162 106-386 217-704 160-1362 160-1365

DESCRIPTION

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. KEY SWITCH KIT WITH RELAY (191-1032) REPLACES IGNITION SWITCH (214-852).

NOTE:

05

ID0229507

78

FIREWALL

RT45 BEGINS WITH S/N CMWRT45XHA0000261

6

7 17

4 5

16

3 8 15

18

14 13 10

12

1 11 9 2

05

ID0262311

79

FIREWALL

RT45 BEGINS WITH S/N CMWRT45XHA0000261 REF PART NO. NUMBER

QTY

1 300-9408 2 105-831 3 116-421 4 150-6406 5 322-452 6 158-902 7 105-825 8 107-135 9 106-381 10 115-704 11 106-048 12 106-049 13 217-193 14 110-560 15 217-826 16 220-2179 17 106-270 18 106-385

1 FIREWALL 7 FLG LK BOLT (1/2-NC X 1-1/2") 1 EDGE SEAL (BULB 3/8-C-1/4)(FT) 1 STEERING VALVE 1 STEERING VALVE BRACKET 1 STEERING COLUMN 4 FLG LK BOLT (3/8-NC X 3/4) 3 CLIP NUT (M8-1.25) 4 FLG LK SCREW (M8-1.25 X 25MM) AR BULK EDGE (1/4") 2 LOCKNUT (#10-24) 2 BOLT (#10-24 X 3/4", PLPS) 1 MINI RELAY BASE 1 POP RIVET (3/16" X 1/2", ALUM) 1 MINI RELAY (SPDT) 1 CONTROLLER, 18 PIN 4 SCREW (M6-1.00 X 20MM) 4 FLG LOCKNUT (M6-1.00)

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTES 2 & 3

1 @ 15"

BEGINS WITH S/N

NOT SHOWN:

FOOTNOTES:

1. IF REPLACING FIREWALL 300-9408, REPLACE FOOT TOE PEDAL 313-184 WITH NEW VERSION. 2. 157-974 OLD STYLE STEERING MOTOR, USE SEAL REPAIR KIT 190-913.

3. 150-6406 BEGINS WITH S/N: CMWRT45______, USE SEAL REPAIR KIT 500-3400,

NOTE:

05

ID0262311

80

FIREWALL

RT45 ENDS WITH S/N CMWRT45XHA0000260

6

7 17

4

16

3

5 8 15

18

14 13 10

12

1 11 9 2

06

ID0229508

81

FIREWALL

RT45 ENDS WITH S/N CMWRT45XHA0000260 REF PART NO. NUMBER

QTY

1 300-9408 2 105-831 3 116-421 4 157-974 5 322-452 6 155-672 7 105-826 8 107-135 9 106-381 10 115-686 11 106-048 12 106-049 13 217-193 14 110-560 15 217-826 16 220-1073 17 106-270 18 106-385

1 FIREWALL 7 FLG LK BOLT (1/2-NC X 1-1/2") 1 EDGE SEAL (BULB 3/8-C-1/4)(FT) 1 POWER STEERING VALVE 1 STEERING VALVE BRACKET 1 STEERING COLUMN 4 FLG LK BOLT (3/8-NC X 1") 3 CLIP NUT (M8-1.25) 4 FLG LK SCREW (M8-1.25 X 25MM) AR BULK EDGE (5/32",SOLD PER 1") 2 LOCKNUT (#10-24) 2 BOLT (#10-24 X 3/4", PLPS) 1 MINI RELAY BASE 1 POP RIVET (3/16" X 1/2", ALUM) 1 MINI RELAY (SPDT) 1 Micro-Mach Controller 4 SCREW (M6-1.00 X 20MM) 4 FLG LOCKNUT (M6-1.00)

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 OLD STYLE, SEE FOOTNOTES 2 & 3

REPLACE WITH 115-704, 1 @ 15"

NOT SHOWN:

FOOTNOTES:

1. IF REPLACING FIREWALL 300-9408, REPLACE FOOT TOE PEDAL 313-184 WITH NEW VERSION. 2. 157-974 OLD STYLE STEERING MOTOR, USE SEAL REPAIR KIT 190-913.

3. 150-6406 NEW STYLE STEERING MOTOR BEGINS WITH S/N: CMWRT45______, USE SEAL REPAIR KIT 500-3400,

NOTE:

06

ID0229508

82

SEAT 3

2

1

22

14 13 13 15

7 9

5

12

10

8

17

16 14 11

19

18

17

4 4

6 4

16

19

20

11

20 17 21 03

ID0229509

83

SEAT REF PART NO. NUMBER

QTY

1 117-429 2 318-588 3 110-253 4 105-003 5 105-267 6 313-525 7 215-1894 8 106-168 9 115-355 10 105-825 11 501-325 12 329-049 13 115-477 14 105-117 15 115-563 16 110-126 17 105-834 18 105-183 19 110-043 20 108-147 21 313-514 22 105-1142

1 1 4 9 4 1 1 2 1 1 8 1 2 3 1 3 6 1 2 4 1 3

DESCRIPTION

REMARKS

SEAT MANUAL COMPARTMENT POP RIVET (3/16" X 1/2") FLG LOCKNUT (5/16-NC) CUP WASHER (5/16") SEAT DECK SEAT SWITCH FLG LK BOLT (1/4-NC X 3/4") GROMMET (1-3/8") FLG LK BOLT (3/8-NC X 3/4) FLG LK BOLT (5/16-NC X 5/8") PROP BAR GRIP RING (.375") WASHER (5/16") COMPRESSION SPRING BOLT-ON CLAMP (1/2") FLG LOCKNUT (3/8-NC) SCREW (3/8-NC X 2-1/2", GD8) HINGE FLGLKBOLT (3/8-NC X 1-1/4")GR8 SEAT DECK MOUNT BULK HOSE (3/8", 180 PSI, SOLD PER FT)

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0229509

84

PUMP MOUNT

9 9

3

11

4 5

10 8

6

11

3 4 5 6

2 1

2 5

5 4 7 FRAME

4 7

03

ID0027711

85

PUMP MOUNT REF PART NO. NUMBER

QTY

DESCRIPTION

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

1 2 2 4 2 2 2 1 2 4 2

PUMP BRACKET FLG LOCKNUT (3/8-NC) BOLT (3/8-NC X 2-1/4") WASHER (3/8") SHOCK MOUNT WASHER (3/4") LOCKNUT (3/8-NC) PUMP SUPPORT PLATE BOLT (3/8-NC X 1-1/2", ALN) BELLEVILLE WASHER (3/8") FLG LK BOLT (3/8-NC X 1")

328-368 105-834 105-162 105-118 116-142 105-975 105-047 325-186 105-238 105-805 105-826

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0027711

86

TIRE - TUBE - WHEEL DANA 44

4

SEE FOOTNOTE 2 5

11 3 8

SEE FOOTNOTE 1 10

SEE FOOTNOTE 1 7 6

9 2 1

10

ID0048163

87

TIRE - TUBE - WHEEL DANA 44

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

QTY

DESCRIPTION

105-065 AR LOCKNUT (1/2-NC) 105-071 AR WASHER (1/2") 105-112 AR CARRIAGE BOLT (1/2-NC X 8") 107-419 AR CARRIAGE BOLT (1/2-NC X 10") 105-1270 AR CARRIAGE BOLT (1/2-NC X 9") 205-148 4 TIRE (26 X 12-12, TL) 205-878 TIRE & WHEEL (26 X 12-12 TL) 205-375 TIRE & WHEEL (26 X 12-12 TL) 205-102 4 TIRE (29 X 12.50-15, B4TL) 205-790 TIRE & WHEEL (29 X 12.50-15 TL) 205-1033 2 TIRE & WHEEL (26 X 12-12 TL), LEFT 205-1299 2 TIRE & WHEEL (26 X 12-12 TL), RIGHT 375-059 AR WHEEL WEIGHT (100 LB) 205-171 4 VALVE STEM (.453/.625") 205-161 VALVE STEM (.625") 205-165 VALVE CAP (.305"-32) 205-290 4 STANDARD WHEEL 205-374 4 WHEEL 205-202 4 WHEEL (15.00" X 8.00", W/5) 205-1032 4 WHEEL 375-097 AR WHEEL WEIGHT (12", 100 #) 105-440 AR BOLT (3/4-NC X 7-1/2") 105-372 AR LOCKNUT (3/4-NC)

REMARKS

2 PER WEIGHT 2 PER WEIGHT 2 PER WEIGHT, USE WITH 205-202.

2 PER WEIGHT, SEE FOOTNOTE 4 USE WITH 205-1032 OBS, REPLACED BY 205-1357 INCL REF NO.'S 4, 6, 7 AND 8 OBS, REPLACED BY 205-1359(LEFT), OR 205-1360(RIGHT) FOOTNOTE 3 INCL REF NO.'S 4, 6, 7 AND 8, SEE FOOTNOTE 3 OBS, REPLACED BY 205-1406 OBS, REPLACED BY 205-1407 2 PER WHEEL; USE WITH 205-202 WHEEL INCL REF NO. 7 INCL REF NO. 7, SEE FOOTNOTE 3 EARLY STYLE 5.32" OFFSET FROM OUTSIDE OBS, REPLACED BY 205-1358 FOOTNOTE 3 OBS, REPLACED BY 205-1405 1 PER WHEEL; USE WITH 205-290 OR 205-374 WHEEL 2 PER WEIGHT 2 PER WEIGHT

NOT SHOWN:

FOOTNOTES:

1. BEFORE INSTALLING WHEELS ON TRACTOR, CLEAN LUG NUT CONICAL SEAT TO REMOVE PAINT; CLEAN WHEEL MOUNTING SURFACE (AXLE OR SPINDLE FLANGE AND WHEEL CENTER DISC) TO REMOVE PAINT. 2. TORQUE LUG NUTS (1/2-20 UNF) IN A CROSS PATTERN TO A FINAL TORQUE OF 95 FOOT POUNDS. 3. 29X12.5-15 TIRES ARE NO LONGER FACTORY APPROVED FOR USE ON UNITS WITH DANA 44 AXLES. SEE HD DANA 60 OPTIONAL AXLE PARTS PAGES FOR MORE INFORMATION. 4. USED WITH PART NUMBER 205-374 5. USES PART NUMBER 205-374 NOTE:

10

ID0048163

88

89

90

BACKFILL BLADE

6 13

4

17

12

1 2 3

16

22 9 15 8 22 19

10

10

14

13 6 7

5

11

18

13 21 6

20

5

04

ID0026675

91

BACKFILL BLADE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

QTY

106-516 6 105-497 6 185-347 1 105-826 2 105-970 6 106-096 4 115-002 1 115-775 1 178-976 1 125-445 1 125-771 2 181-974 1 181-981 2 181-982 4 179-338 1 179-337 1 183-584 2 183-587 2 183-588 1 185-350 1 313-027 1 300-4590 1 335-027 1 313-037 313-034 107-779 2

DESCRIPTION

FLG BOLT (5/8-NC X 1-1/2",FER) CAM WASHER (5/8") BFB SWING RETAINER FLG LK BOLT (3/8-NC X 1") FLANGE BOLT (5/8-NC X 1-3/4", GD8) FLANGE BOLT (1/2-NC X 1-3/4", GD8) ZERK (02N90) FRICTION WASHER (4.300 X .062" THK") FRICTION WASHER (4.300 X .031" THK") BRONZE BUSHING (4.259") COMPOSITION BUSHING (1.25") TAPERED INSERT (1.5") TAPERED INSERT (1") TAPERED INSERT (1.25") TAPERED PIN (1.500" X 5.850") TAPERED PIN (1.250" X 11.590") TAPERED PIN (1.000" X 2.440") TAPERED PIN (1.250" X 3.000") TAPERED PIN (1.250" X 3.940") BFB SWING POST BLADE MOUNT BLADE MOUNT BACKFILL BLADE (64") - DOZER CUTTING EDGE 64" - TURF BACKFILL BLADE (64") - TURF DOWEL PINS (5/8 X 2.000)

REMARKS

LOCTITE 271 OR 277 & TORQUE TO 300 FT LBS.

USE LOCTITE 271 OR 277 USE LOCTITE 271 OR 277

OLD STYLE STANDARD WELD-ON OPTIONAL USE LOCTITE # 680

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0026675

92

TILT BACKFILL BLADE (64")

5 13

3

14 10

6

1

9 2 11 8 4

7

2

12

03

ID0164981

93

TILT BACKFILL BLADE (64") REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

QTY

190-1678 190-422 362-649 1 313-075 2 105-874 1 105-303 4 105-379 1 105-826 2 106-029 2 107-011 2 105-854 2 107-011 2 105-854 2 115-483 1 181-981 1 183-584 1 183-592 1 328-623 1 313-037 1 105-072 1 105-118 1

DESCRIPTION

REMARKS

64" TILT BACKFILL BLADE-RT40/45 64" TILT BFB KIT TILT CYLINDER COVER RETAINER TILT BLADE BOLT (3/8-NC X 1-1/2") FLG BOLT (5/8-NC X 2-1/2") BOLT (3/4-NC X 1-1/4", NLK) FLG LK BOLT (3/8-NC X 1") BOLT (3/8-NC X 3/4", BUT SOC) CLIP NUT (3/8-NC) CLIP NUT (3/8-NC) CLIP NUT (3/8-NC) CLIP NUT (3/8-NC) KLIP RING (1-1/4") TAPERED INSERT (1") TAPERED PIN (1" X 2.44") PIN (1.25" X 1.625") TILT BACKFILL BLADE (64")-DOZER CUTTING EDGE (64") - TURF LOCK WASHER (3/8") WASHER (3/8")

INCL REF NO.'S 1-6, 8-12, SEE FOOTNOTES 1 & 2 INCL REF NO.'S 1-6, 8-12, SEE FOOTNOTES 1 & 2

LOCTITE & TORQUE TO 225 FT LBS 4 SLOT CYL COVER (362-649) 2 SLOT CYL COVER (362-649) 4 SLOT CYL COVER (362-649) OBSOLETE 2 SLOT CYL COVER (362-649) OBSOLETE

WELD-ON

NOT SHOWN:

FOOTNOTES:

1. FOR ADDITIONAL KIT PARTS REFER TO PAGE TITLED "TILT BLADE HYDRAULICS".

2. THE RT40 AND RT45 USE KIT 190-1678. THE 3500 AND 3610 USE KIT 190-422.

NOTE:

REFER TO INSTALLATION INSTRUCTIONS 060-011.

03

ID0164981

94

2 POST ROPS

5

1

4

6

1

11

10 3 11

8

2 7

9 2

D

805-543

95

2 POST ROPS REF PART NO. NUMBER

QTY

DESCRIPTION

1. 105-071 2 WASHER (1/2") 2. 105-340 4 FLG LOCKNUT (3/4-NC) 3. 105-384 4 WASHER (3/4") 4. 105-831 2 FLG LK BOLT (1/2-NC X 1-1/2") 5. 110-272 1 SEAT BELT KIT 6. 306-362 1 2-POST ROPS 7. 106-039 2 NUTSERT (3/8-NC) 8. 362-582 1 LEFT ROPS MOUNT COVER 9. 105-826 2 FLG LK BOLT (3/8-NC X 1") 10. 362-583 1 RIGHT ROPS MOUNT COVER 11. 106-190 4 BOLT (3/4-NC X 6-1/2", GD8)

REMARKS

SEE FOOTNOTE 1. TORQUE TO 300 FT/LBS.

FOOTNOTES

1. LOCATE THE HEAD OF THE ROPS MOUNTING BOLTS, BOTH SIDES, TO THE FRONT OF THE MACHINE.

NOTE:

D

805-543

96

TAPE DISPENSER

9 1 4 5

3

6 2

4 5 8

7 8

06

ID0263926

97

TAPE DISPENSER REF PART NO. NUMBER

QTY

190-1637 301-1490 301-1399 301-1491 105-258 105-098 105-047 301-1492 105-714 105-207

1 1 2 3 3 3 1 2 3

1 2 3 4 5 6 7 8 9

DESCRIPTION

TAPE DISPENSER PLATE MOUNT RING BOLT (3/8-NC X 3-3/4") BOLT (3/8-NC X 3") LOCKNUT (3/8-NC) COLLAR SET SCREW (3/8-NC X 1", SQ) BOLT (3/8-NC X 4-1/4")

REMARKS

INCL'S REF #'S 1 THRU 9

RT80 & RT55 HT/RT115 & RT115Q

RT80Q

NOT SHOWN:

FOOTNOTES:

NOTE:

06

ID0263926

98

NOTES:

ID0134963

99

CONTROL COMPONENTS

ID0135065

100

HAND THROTTLE

2

12

3 1 5 11

4 8 14 7 4 9

13 8

05

6

10 5

5 5

ID0012179

101

HAND THROTTLE REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14

1 2 2 3 1 1 1 3 1 1 4 1 1 1

323-614 106-265 105-139 105-186 190-1467 324-700 324-701 106-231 106-106 108-133 107-781 323-605 108-063 106-538

DESCRIPTION

REMARKS

THROTTLE BRACKET BOLT (1/4-NC X 3/4", BUT TORX) CLIP NUT (1/4") NUT (#10-24) THROTTLE CABLE KIT THROTTLE BRACKET CABLE MOUNT SCREW (M6-1.00 X 16MM) NUT (M6-1.00) CABLE STOP HEX SCREW (#10-24 X 5/8") RIGHT REAR FENDER SET SCREW (#10 X .188") LOCKNUT (M6-1.00,PRV TRQ,10.9)

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0012179

102

FOOT CONTROL

6

10

18 1

24

10 11

27 2

13

5

8

24

14

18

19

17 9

3 23

18

25

1 16

20

21 7 4

2

22 12 21 15

02

ID0026653

103

FOOT CONTROL REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

2 2 1 1 1 1 1 2 1 2 1 1 1 1 2 1 1 4 2 4 3 1 1 2 1

105-047 106-004 313-561 313-184 363-687 196-322 313-553 181-617 115-582 106-138 110-318 363-636 110-102 106-018 125-447 313-186 365-193 105-093 105-873 105-805 105-003 105-823 110-287 106-255 105-262

DESCRIPTION

REMARKS

LOCKNUT (3/8-NC) BOLT (3/8-NC X 1-3/8", GD8) CONTROL ROD (3/8-NF X 7.900") FOOT PEDAL CABLE BRACKET CONTROL CABLE (#10-32 X 37") SPRING BRACKET SPRING BACK-UP COMPRESSION SPRING NUT (M5-0.80) BALL JOINT (#10-32,FM) SPRING CENTER BRACKET ROD END (3/8-NF, FM) JAM NUT (3/8-NF) FLG BRONZE BUSHING (.502") PEDAL HEEL CONTROL ROD (3/8-NF X 10.625") NUT (3/8-NF) FLG LK BOLT (5/16-NC X 1") BELLEVILLE WASHER (3/8") FLG LOCKNUT (5/16-NC) FLG LK BOLT (5/16-NC X 3/4") ROD END (3/8-NF, FM, LH) WASHER (.406") NUT (3/8-NF, LH)

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0026653

104

GROUND DRIVE CONTROLS 19

DETAIL A 15

14

2

8

2 4

MT12 ONLY

11

13

17

A

3

7 20

1

16 12

6 23

5 9

23

18 10

18 10

21

24 22 25

03

ID0026656

105

GROUND DRIVE CONTROLS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

QTY

506-021 1 105-832 4 105-811 2 105-284 8 196-322 1 105-865 2 196-131 1 105-197 2 110-697 1 105-047 2 365-443 1 105-019 2 365-441 1 301-1418 1 108-147 2 331-166 1 110-318 2 110-102 2 110-487 1 106-678 2 106-506 2 313-543 1 105-805 4 105-834 2 501-153 2

DESCRIPTION

NUT (#10-32) FLG LOCKNUT (1/4-NC) LOCKNUT (#10-24) WASHER (3/16") CONTROL CABLE (#10-32 X 37") BOLT (1/4-NC X 3/4", GD8) FRICTION CONTROL BOLT (1/4-NC X 1") BOLT-ON CLAMP (.360") LOCKNUT (3/8-NC) GROUND DRIVE LEVER BOLT (3/8-NF X 1") CABLE MOUNT DRIVE PLATE FLG LK BOLT (3/8-NC X 1-1/4") GR8 BOLT-ON BACK-UP (.360") BALL JOINT (#10-32, FM) ROD END (3/8-NF, FM) KNOB (1/2-NC, ORG) LOCKNUT (1/4-NF) BOLT (#10-24 X 3/4") CABLE MOUNT BELLEVILLE WASHER (3/8") FLG LOCKNUT (3/8-NC) FLG LK BOLT (3/8-NC X 5/8")

REMARKS

GROUND DRIVE

GROUND DRIVE

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0026656

106

CLM3000 GPS KIT RT45 LRC, RT45 HRC

4 2

6 5 3

1

02

ID0714823

107

CLM3000 GPS KIT RT45 LRC, RT45 HRC REF PART NO. NUMBER

190-2693 1 222-7232 2 220-6781 3 215-3312 4 107-414 5 106-956 6 106-013 7* 303-4228 8* 215-2801 9* 215-2901 10* 214-958 11* 106-574 12* 107-312 13* 240-7223 14* 303-4997

QTY

DESCRIPTION

CLM3000 GPS KIT 1 4G + GNSS ANTENNA 1 FMS - GPS 3657 W/DATA PLAN 1 GPS HARNESS - CANLINK 3000 SERIES 2 SCREW (M4-0.70 X 30MM,BUT SOC) 2 M4-.70 MM NYLON INSERT NUT 2 WASHER (3/16") 1 ANTENNA MOUNT 1 DEUT 8P DTM04-8P RCPT 1 WM-8P DTM WEDGE LOCK 8 DEUT CAVITY PLUG 0413-204-2005 (20 GA) 2 CLIP NUT (M6-1.00) 2 SCREW (M6-1.00 X 25MM, BUT SOC) 1 HOSTING PLAN - GPS END CUSTOMER DATA TERM START 2YR (5MB/MO) 1 BRACKET

REMARKS

NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED

NOT SHOWN:

FOOTNOTES:

NOTE:

190-2693 CLM3000 GPS KIT - THIS KIT INCLUDES PARTS THAT MAY NOT BE REQUIRED FOR EVERY UNIT. DISCARD UNUSED PARTS.

02

ID0714823

108

CLM3000 TELEMATICS KIT RT45 LRC, RT45 HRC

2 4

5

6 3

1

02

ID0714821

109

CLM3000 TELEMATICS KIT RT45 LRC, RT45 HRC REF PART NO. NUMBER

190-2695 1 222-7232 2 220-6780 3 215-3311 4 107-414 5 106-013 6 106-956 7* 303-4228 8* 106-574 9* 107-312 10* 240-1360

QTY

DESCRIPTION

CLM3000 TELEMATICS KIT 1 4G + GNSS ANTENNA 1 FMS - TELEMATICS 3657 W/DATA PLAN 1 TELEMATICS HARNESS - CANLINK 3000 SERIES 2 SCREW (M4-0.70 X 30MM,BUT SOC) 2 WASHER (3/16") 2 M4-.70 MM NYLON INSERT NUT 1 ANTENNA MOUNT 2 CLIP NUT (M6-1.00) 2 SCREW (M6-1.00 X 25MM, BUT SOC) 1 HOSTING PLAN - TM END CUSTOMER DATA TERM START 2YR (20MB/MO)

REMARKS

NOT USED NOT USED NOT USED

NOT SHOWN:

FOOTNOTES:

NOTE:

190-2695 CLM3000 TELEMATICS KIT - THIS KIT INCLUDES PARTS THAT MAY NOT BE REQUIRED FOR EVERY UNIT. DISCARD UNUSED PARTS

02

ID0714821

110

ATTACHMENT DRIVE CONTROLS 19

8 11

14 17

4

1

20 9

5

21

6

2 7 15

13

18

2

22 16 26

24

26

10

3 12

23 21

9 3 25

B

16

809-506

111

ATTACHMENT DRIVE CONTROLS REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

1 4 4 8 1 2 1 2 2 2 1 2 1 1 2 2 2 2 1 2 4 2 2 1 1 4

506-021 105-832 106-048 105-284 196-334 105-865 196-131 105-197 110-697 105-047 365-443 105-019 365-441 331-422 108-147 331-166 110-318 110-102 110-375 106-678 106-049 105-834 501-153 313-543 313-544 105-805

DESCRIPTION

NUT (#10-32) FLG LOCKNUT (1/4-NC) LOCKNUT (#10-24) WASHER (3/16") CONTROL CABLE (#10-32 X 58") BOLT (1/4-NC X 3/4", GD8) FRICTION CONTROL BOLT (1/4-NC X 1") BOLT-ON CLAMP (.360") LOCKNUT (3/8-NC) GROUND DRIVE LEVER BOLT (3/8-NF X 1") CABLE MOUNT DRIVE PLATE FLG LK BOLT (3/8-NC X 1-1/4") GD8 BOLT-ON BACK-UP (.360") BALL JOINT (#10-32, FM) ROD END (3/8-NF, FM) KNOB (1/2-NC, YELLOW) LOCKNUT (1/4-NF) BOLT (#10-24 X 3/4", PLPS) FLG LOCKNUT (3/8-NC) FLG LK BOLT (3/8-NC X 5/8") CABLE MOUNT MOUNT BRACKET BELLEVILLE WASHER (3/8")

REMARKS

GROUND DRIVE

GROUND DRIVE

FOOTNOTES

NOTE:

B

809-506

112

PARKING BRAKE

BEGINS WITH CMWRT45XPF0002832

1 2

3 4 2 5

2

6

7

2 8

18 10

14

9

5 13 17 12 11

15

19

01

16

ID0375439

113

PARKING BRAKE

BEGINS WITH CMWRT45XPF0002832 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

QTY

110-469 1 160-744 1 105-823 4 105-003 4 163-083 1 106-517 2 105-156 2 105-834 2 110-150 2 105-512 2 105-826 4 160-1321 1 105-834 4 301-9173 1 106-012 2 163-209 1 182-135 105-089 2 163-218 1

DESCRIPTION

GRIP (7/8", ORANGE) PARKING BRAKE LEVER FLG LK BOLT (5/16-NC X 3/4") FLG LOCKNUT (5/16-NC) BRAKE CABLE (5/16" X 48.750") BOLT (5/16-NC X 1-3/8") BOLT (3/8-NC X 1-1/2") FLG LOCKNUT (3/8-NC) CLEVIS PIN (5/16" X 1") COTTER PIN (3/32" X 3/4") FLG LCK BOLT (3/8-NC X 1") BRAKE ROTOR (8.70") FLG LOCKNUT (3/8-NC) CALIPER MOUNT (8.70" ROTOR) FLG BOLT (5/8-NC X 3") BRAKE CALIPER FLANGE YOKE (1.088"-14S) LOCKNUT (5/16-NC) BRAKE STATOR SHOE

REMARKS

LOCTITE

SEE FN 1 SEE FN 1

OUTPUT

BRAKE STATOR INCLUDES 2 PIECES.

NOT SHOWN:

FOOTNOTES:

1. 301-9173 MUST BE USED WITH 160-1321 WHEN PERFORMING UPGRADE TO OLDER UNIT.

NOTE:

01

ID0375439

114

PARKING BRAKE

ENDS WITH CMWRT45XTF0002831

1 2

3 4 2 5

2

6

2 8

18 10 14

7

9

5 13 17 12 11

15

19

03

16

ID0026657

115

PARKING BRAKE

ENDS WITH CMWRT45XTF0002831 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

110-469 160-744 105-823 105-003 163-083 106-517 105-156 105-834 110-150 105-512 105-826 160-765 105-834 313-176 106-012 163-209 182-135 105-089 163-218

QTY

1 1 4 4 1 2 2 2 2 2 4 1 4 1 2 1 2 1

DESCRIPTION

GRIP (7/8", ORANGE) PARKING BRAKE LEVER FLG LK BOLT (5/16-NC X 3/4") FLG LOCKNUT (5/16-NC) BRAKE CABLE (5/16" X 48.750") BOLT (5/16-NC X 1-3/8") BOLT (3/8-NC X 1-1/2") FLG LOCKNUT (3/8-NC) CLEVIS PIN (5/16" X 1") COTTER PIN (3/32" X 3/4") FLG LCK BOLT (3/8-NC X 1") BRAKE DISC FLG LOCKNUT (3/8-NC) BRAKE CALIPER MOUNT FLG BOLT (5/8-NC X 3") BRAKE CALIPER FLANGE YOKE (1.088"-14S) LOCKNUT (5/16-NC) BRAKE STATOR SHOE

REMARKS

LOCTITE

SEE FN 1 SEE FN 1

OUTPUT

BRAKE STATOR INCLUDES 2 PIECES.

NOT SHOWN:

FOOTNOTES:

1. FOR BRAKE UPGRADE SEE ID0375439.

NOTE:

03

ID0026657

116

REAR STEER INDICATOR BEGINS WITH S/N: 12 1

14

11 328-112 179-201

8

SEE FOOTNOTE 1 9 7

15 16 5

16 15

13 2 4 6 3

10 13 15

2

W/DANA 60 AXLE DETAIL

16 5 3

16 15

6

10

02

ID0754949

117

REAR STEER INDICATOR BEGINS WITH S/N: REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

QTY

313-554 328-110 313-108 154-844 365-191 361-475 363-368 300-11294 328-112 179-201 105-841 105-213 105-866 106-103 110-217 115-480 160-335 105-115

DESCRIPTION

1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 2 2

INDICATOR PLATE PIVOT ARM PIVOT BASE EXT HOSE (1/2"-19.25"-3000PSI) CONTROL ROD (5/16-NF X 4.450") CONTROL ROD (5/16-NF X 3.250") PIVOT LINK MOUNT LINK MOUNT INDICATOR MOUNT INDICATOR PIVOT STUB CLIP NUT (5/16-NC) NUT (5/16-NF) FLG LK BOLT (5/16-NC X 1-1/4") BOLT (1/4-NC X 1/2", BUT SOC) WORM CLAMP (7/16" TO 1") GRIP RING (.750") BALL JOINT (5/16-NF) JAM NUT (5/16-NF)

REMARKS

2.05" HIGH DANA 44 DANA 60 DANA 44 DANA 60, REPLACES 363-629

NOT SHOWN: 274-087 REAR STEER INDICATOR DECAL. 274-751 REAR STEER FUNCTION DECAL. 700-226 CONTROL VALVE.

NOT SHOWN:

FOOTNOTES:

1. 179-201 MUST BE FLUSH WITH 328-112. SEE GRAPHICS ON OPPOSITE PAGE.

NOTE:

02

ID0754949

118

REAR STEER INDICATOR ENDS WITH S/N:

12 1

14

11 328-112 179-201

8

SEE FOOTNOTE 1 9 7

15 16

13

5

16 15

4 2

10

6

13 3 15

2

16 5 3

W/DANA 60 AXLE DETAIL

16 15

6

10

07

ID0042004

119

REAR STEER INDICATOR ENDS WITH S/N: REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

313-554 328-110 313-108 154-844 365-191 361-475 363-368 363-629 328-112 179-201 105-841 105-213 105-866 106-103 110-217 115-480 160-335 105-115

QTY

1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 2 2

DESCRIPTION

INDICATOR PLATE PIVOT ARM PIVOT BASE EXT HOSE (1/2"-19.25"-3000PSI) CONTROL ROD (5/16-NF X 4.450") CONTROL ROD (5/16-NF X 3.250") PIVOT LINK MOUNT PIVOT LINK MOUNT INDICATOR MOUNT INDICATOR PIVOT STUB CLIP NUT (5/16-NC) NUT (5/16-NF) FLG LK BOLT (5/16-NC X 1-1/4") BOLT (1/4-NC X 1/2", BUT SOC) WORM CLAMP (7/16" TO 1") GRIP RING (.750") BALL JOINT (5/16-NF) JAM NUT (5/16-NF)

REMARKS

2.05" HIGH DANA 44 DANA 60 DANA 44 DANA 60

NOT SHOWN: 274-087 REAR STEER INDICATOR DECAL. 274-751 REAR STEER FUNCTION DECAL. 700-226 CONTROL VALVE.

NOT SHOWN:

FOOTNOTES:

1. 179-201 MUST BE FLUSH WITH 328-112. SEE GRAPHICS ON OPPOSITE PAGE.

NOTE:

07

ID0042004

120

NOTES:

ID0134963

121

HYDRAULICS

ID0135071

122

OIL COOLER AND FILTER HYDRAULICS

38 31

25

32 34

35

29 35

10 2

25 40 1

33

30

14

24

27 4

7 4

26

26

10

17 39

10

4

10

31 13

14 15 18

8

03

10

12

10

10

23 21

9

10 10

19 22

3

28

20

6 37 36

5

11

16

ID0229337

123

OIL COOLER AND FILTER HYDRAULICS REF PART NO. NUMBER

QTY

1 194-523 2 116-460 3 300-2464 4 116-460 5 154-300 6 155-933 7 155-958 8 105-818 9 155-174 10 110-353 11 110-573 12 159-731 13 117-719 14 514-114 15 116-460 16 159-729 17 159-730 18 322-289 19 105-098 20 105-845 21 106-596 22 105-118 23 105-940 24 153-189 25 110-856 26 155-161 27 158-576 28 105-834 29 157-946 30 116-636 31 105-825 32 300-2465 33 106-654 34 106-991 35 155-230 36 155-936 37 155-935 38 501-153 39 110-332 40 159-074

1 EOC/HOC 1 BULK HOSE (1", SOLD PER FT) 1 MANIFOLD BRACKET AR BULK HOSE (1", SOLD PER FT) 1 CONNECTOR (10O-12S90) 1 QDC ADAPTER (12-12S/J) 1 TRICK QDC BODY (12-14S) 2 BOLT (1/4-NC X 1-1/2") 1 S/O COUPLER (12S-12H90) 11 WORM CLAMP (3/4" TO 1-1/2") 1 BOLT-ON CLAMP (1",SOLD PER SET) 1 S/O COUPLER (12OFX-12H90) 1 ABRASION SLEEVE (1.75" X 36") 2 S/O TEE (12S-16H-16H90) 1 BULK HOSE (1", SOLD PER FT) 1 F/T RETURN LINE 1 COOLER/AUX HARD LINE 1 BACKUP (BOLT-ON) 3 BOLT (3/8-NC X 3") 3 FLG LOCKNUT (3/8-NC) 2 LK SCREW (M14-2.00X30MM,EPXY) 3 WASHER (3/8") 2 WASHER (5/8) 1 AUXILIARY MANIFOLD 2 BOLT-ON CLAMP (1-5/8") 2 S/O COUPLER (12S-16H) 1 CHECK VALVE (12SF-12SF) 1 FLG LOCKNUT (3/8-NC) 1 FILTER HEAD AR BULK HOSE (3/4", SOLD PER FT) 2 FLG LK BOLT (3/8-NC X 3/4) 1 HYDRAULIC FILTER BRACKET 1 SCREW (M10-1.50 X 16MM) 2 FLG LK SCREW (M8-1.25 X 20MM) 2 S/O COUPLER (16S-16H45) 1 DUST PLUG (1/2" - 3/4") 1 DUST CAP (1/2" - 3/4") 3 FLG LK BOLT (3/8-NC X 5/8") 1 BOLT-ON CLAMP (1-5/8") 1 FILTER ELEMENT (1-3/8 UNF)

DESCRIPTION

REMARKS

USE 1 @ 40" USE 1 @ 30" USE 3 @ 6" EACH

USE 1 @ 36" 118-216 SPIRAL WRAP (1", SOLD PER FOOT) 4"

USE 1 @ 6"

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS

03

ID0229337

124

PUMPS AND RESERVOIR

10 20 18 19

11 13

15

18

21 1

P

17

LS EF

16

CF

2

24 25

30

24

8

6 23 43 31

14

5

41

9 36

42

24 12

4

34

7

3 22 24 24

32 28 33

26 24

29 28

35 44

27

40

39

38

37

FROM OIL FILTER

03

ID0229340

125

PUMPS AND RESERVOIR REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

QTY

300-8021 1 105-226 2 159-981 1 159-982 1 190-805 1 126-191 2 126-021 2 516-025 2 499-072 1 499-073 1 499-633 1 500-639 1 157-041 1 158-459 1 515-048 1 154-299 1 116-218 1 115-320 1 153-766 1 153-900 1 155-074 1 154-298 1 105-826 4 158-901 1 105-190 2 514-296 1 110-217 2 116-286 AR 514-297 1 105-841 2 154-301 1 514-088 1 110-353 6 116-460 AR 116-460 AR 156-111 1 110-026 2 116-636 AR 110-336 1 155-195 1 116-335 AR 155-146 1 514-010 1 159-729 1 154-327 1 515-584 1 110-573 1 322-289 1 105-818 2 105-805 2 105-238 2 117-706 1 154-331 1

DESCRIPTION

OIL RESERVOIR WASHER (5/16") TANDEM PUMP DANA 44 TANDEM PUMP DANA 60 SEAL REPAIR KIT NEEDLE BEARING BALL BEARING (1.373") RELIEF VALVE (3625 PSI) RELIEF VALVE (5000 PSI) RELIEF VALVE (3045 PSI) NEUTRAL START MOUNTING KIT NEUTRAL START SWITCH O-RING (152 D70) HYDRAULIC PUMP HOSE (10OFX45-18"-3000) RUN TEE (08S-08O-08O) SIGHT GLASS (2") GROMMET (1-1/2") LOCKING CAP (VENTED) STRAINER PLUG (08S, SOC) CONNECTOR (10S-10O90) FLG LK BOLT (3/8-NC X 1") PRIORITY VALVE BOLT (5/16-NC X 2-3/4") SLIP-ON COUPLER (04S-08H) WORM CLAMP (7/16" - 1") BULK HOSE (1/2", SOLD PER 1") SLIP-ON COUPLER (O8S-O8H90) CLIP NUT (5/16-NC) CONNECTOR (10S-10O) SLIP-ON COUPLER (16S-16H) WORM CLAMP (3/4" - 1-1/2") BULK HOSE (1", SOLD PER 1') BULK HOSE (1", SOLD PER 1') HYD LINE (-12) WORM CLAMP (1/2" - 1-1/4") BULK HOSE (3/4", SOLD PER 1") STRAINER (24S-20SF) SLIP-ON COUPLER (20S-16H90) BULK HOSE (1", SOLD PER 1') SLIP-ON COUPLER (12O-16H90) CONNECTOR (12O-20S90) F/T RETURN LINE CAP (08OF) HOSE (08OFX90L-15"-3000) BOLT-ON CLAMP (1", SOLD PER SET) BACKUP (BOLT-ON) BOLT (1/4-NC X 1-1/2") BELLEVILLE WASHER (3/8") BOLT (3/8-NC X 1-1/2", SOC) ABRASION SLEEVE (1.59" X 17") PLUG (08O)

REMARKS

FRONT PUMP REAR PUMP - PORT A REAR PUMP - PORT B SEAL KIT AVAILABLE (500-1573)

AUX PRESSURE

USE 1 @ 10"

USE 1 @ 10" USE 1 @ 6" CHARGE PRESSURE USE 1 @ 5.5"

USE 1 @ 13.25"

RETURN PRESSURE

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

03

ID0229340

126

GROUND DRIVE HYDRAULICS BEGINS WITH S/N ____80002572

19 23

RT40 DANA 44 ONLY 42 44

38 37

43 40

2 5

26

39 18

8

41

44

1 2

25

3 36

6

5

7 4 9 10

28 31

22 29 21 27

32 35

22

12

16 11

30 14

45

TO ATTACHMENT MOTOR. SEE F/N 5.

17

34

13 15

20

33

16 24 46 SEE FOOTNOTE 4 SEE FOOTNOTE 1

06

ID0205720

127

GROUND DRIVE HYDRAULICS BEGINS WITH S/N ____80002572 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

QTY

501-829 1 154-342 2 154-221 1 515-265 1 117-672 2 155-486 1 117-718 1 154-788 1 154-437 1 154-343 1 154-345 1 159-157 2 159-148 1 154-344 1 154-230 1 159-388 1 154-252 2 515-065 1 154-719 1 105-224 2 105-085 2 515-013 1 514-295 1 159-381 2 515-101 1 159-412 1 154-845 1 154-346 1 154-690 1 154-691 1 117-679 1 154-247 1 154-273 1 158-943 1 149-112 1 154-335 1 154-296 1 117-684 1 117-670 1 150-1994 1 154-227 1 154-222 1 515-635 1 154-348 1 515-636 1 154-344 1 117-989 2 150-1959 1 154-383 1

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

46.

DESCRIPTION

FLUSHING VALVE CONNECTOR (06S-06O90) CONNECTOR (06S-06O) HOSE (06OFX-14"-3000) ABRASION SLEEVE (1.00" X 20") HOSE (06OFX90-31"-3000) ABRASION SLEEVE (1.00" X 36") HOSE (06OFX-40"-3000) UN BR TEE (06OFX-06O-06O) UNION (06S-06OFX90) RUN TEE (06S-06O-06O) QDC ADAPTER (02-06OF) DUST CAP (1/8") UNION RUN TEE (06OFX-06O-06O) BRANCH TEE (06S-04O-04O) CHECK VALVE (06S-06O) CONNECTOR (04S-04O90) HOSE (04OFX90-14"-3000) HOSE (04OFX-10"-3000) BOLT (1/4-NC X 2-1/2") LOCKNUT (1/4-NC) HOSE (04OFX-42"-3000) CONN (12O-16S90-06SF-06SF) CHECK VALVE (06S-06O) HOSE (060FX45/90-270-23"-3000) RETURN MANIFOLD HOSE (06OFX45-26"-3000) BRANCH TEE (06S-06O-06O) HOSE (12OFX90-23"-4000) HOSE (12OFX90-41"-4000) ABRASION SLEEVE (1.59" X 32") CONNECTOR (10S-12O) CONNECTOR (10S-12O90) HYDRAULIC MOTOR HYDRAULIC MOTOR CONNECTOR (04O-04O) CAP (04OF) ABRASION SLEEVE (1.00" X 26") ABRASION SLEEVE (1.00" X 10") HYD RELIEF VALVE (3400PSI) CONNECTOR (06O-08S90) CONNECTOR (06O-08S) HOSE (06OFX45-22"-4000) UN BR TEE (06OFX-06O-06O) HOSE (06OFX90S-28"-4000) UN RUN TEE (06OFX-06O-06O) ABRASION SLEEVE (1.00" X 24") CONNECTOR (04O-04OFX45) PLUG (04s)

REMARKS

SEE F/N 5.

USED WITH 3700 DD USED WITH RT40/RT45

SEE F/N 5.

USED WITH 3700 DANA 44 USED WITH 3700/5700 DANA 60 SEE F/N 5.

SEE F/N 5.

USED WITH RT40/RT45 DANA 44 ONLY. USED WITH RT40/RT45 DANA 44 ONLY. USED WITH RT40/RT45 DANA 44 ONLY. USED WITH RT40/RT45 DANA 44 ONLY. USED WITH RT40/RT45 DANA 44 ONLY. USED WITH RT40/RT45 DANA 44 ONLY. USED WITH RT40/RT45 DANA 44 ONLY. USED WITH RT40/RT45 DANA 44 ONLY. USED WITH RT40/RT45 DANA 44 ONLY. SEE F/N 4.

SEE F/N 2 AND 3.

SEE F/N 3.

SEE F/N 3.

SEE F/N 3.

SEE F/N 3.

SEE F/N 3.

SEE F/N 3.

SEE F/N 3.

FOOTNOTES:

1. PLUG COMES WITH VALVE. REMOVE FROM BOTTOM OF VALVE AND REPLACE IT ON THE SIDE AS SHOWN. 2. SEE ATTACHMENT DRIVE HYDRAULICS PAGE (ID0026907) FOR MOUNTING LOCATION. 3. BEGINS WITH S/N CMWRT40XE80002352.

4. BEGINs WITH S/N DWPRT45XVJ0004137 FOR DANA 44 UNITS. 5. AFTER S/N DWPRT45XVJ0004137, ONLY DANA 60 UNITS WILL RETAIN REF NO'S 16, 20, 33, AND 34.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

06

ID0205720

128

ATTACHMENT DRIVE HYDRAULICS

RT40/RT45 DANA 44 ONLY 11 26 2

19 10

27

11

10

19 2 8

14 B

6

15 A 9

21

12 25 10

20 7

1

1

20 4

22

23 13

10

3 B

8

25

8

12

5 17

A 16

18

24

10

ID0026907

129

ATTACHMENT DRIVE HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

QTY

514-322 2 105-095 2 154-345 1 159-157 1 159-148 515-583 1 156-105 1 156-106 1 105-106 6 214-819 1 105-085 4 328-468 1 110-573 2 363-640 1 154-224 1 154-342 1 154-756 1 117-718 1 159-388 158-939 1 154-384 2 159-147 1 159-148 159-981 159-982 499-633 500-639 190-805 500-2396 1 500-2397 1 158-459 154-344 1 322-289 2 150-1994 1 105-297 2

DESCRIPTION

CONN (16S-16O90-06SF-06SF) WASHER (1/4") RUN TEE (06S-06O-06O) QDC ADAPTER (02-06OF) DUST CAP (1/8") HOSE (06OFX90-12"-3000) HYD LINE (-16) HYD LINE (16O-16OFX) BOLT (1/4-NC X 2") TEMPERATURE SWITCH LOCKNUT (1/4-NC) STRAP BOLT-ON CLAMP (1", SOLD PER SET) BRACKET CONNECTOR (06S-06O45) CONNECTOR (06S-06S90) HOSE (06OFX-38"-3000) ABRASION SLEEVE (1.00" X 36") CHECK VALVE (06S-06O) FLOW REGULATOR PLUG (06S) QDC ADAPTER (02-06S) DUST CAP (1/8") HYD TANDEM PUMP (PISTON) HYD TANDEM PUMP (PISTON) NEUTRAL START MOUNTING KIT NEUTRAL START SWITCH SEAL REPAIR KIT GASKET, NSS PLATE MTG GASKET, NSS MOUNTING COVER HYDRAULIC PUMP UN RUN TEE (06OFX-06O-06O) BACKUP (BOLT-ON) HYD RELIEF VALVE (3400 PSI) BOLT (1/4 - NC X 3-1/4")

REMARKS

RETURN PRESSURE

8 GPM, 225 PSI

DANA 44 DANA 60 SEAL KIT AVAILABLE (500-1573)

USED ON RT40/RT45 DANA 44 ONLY, SEE F/N 1 & 2.

USED ON RT40/RT45 DANA 44 ONLY, SEE F/N 2.

NOT SHOWN:

FOOTNOTES:

1.

2.

SEE GROUND DRIVE HYDRAULIC PAGE (ID0034901) FOR COMPONENTS REPLACES REF NO. 8, BEGINS WITH S/N CMWRT40XE80002352.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

10

ID0026907

130

ATTACHMENT TILT/SWING CONV KIT

12

11 10

6 2

8

6 TO PLOW/SAW SWING (COUNTERBALANCE VALVE)

7 6

6 6

4

6

3

1

TO BFB "TILT" CYLINDER

07

9

5

ID0111690

131

ATTACHMENT TILT/SWING CONV KIT REF PART NO. NUMBER

QTY

190-739 1. 105-834 2. 105-047 3. 105-183 4. 105-117 5. 105-827 6. 154-276 7. 154-942 8. 158-510 110-585 157-060 9. 313-545 10. 515-542 11. 154-250 12. 159-156 159-148

DESCRIPTION

TILT-SWING SELECTOR CONV KIT 2 FLG LOCKNUT (3/8-NC) 2 LOCKNUT (3/8-NC) 2 BOLT (3/8-NC X 2-1/2", GD8) 2 WASHER (5/16") 2 FLG LK BOLT (3/8-NC X1-1/4") 6 CONNECTOR (04O-08S90) 1 HOSE (08OFX90S-13"-3000) 1 HYD SELECTOR VALVE KNOB (3/8-NC, BLACK) QUAD RING (116 D70) 1 SELECTOR BRACKET 1 HOSE (04OFX90M-18"-3000) 1 CONNECTOR (040-06S45) 1 QDC ADAPTER (02-040F) DUST CAP (1/8")

REMARKS

INCL. REF. NO.'S 1-10

NOT SHOWN:

274-070

SELECTOR BLD TLT/ATT SWG DECAL

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT O-RINGS.

07

ID0111690

132

OPTIONAL AUXILIARY MANIFOLD 27 24

12

28

25

22

TO GROUND DRIVE PUMP

6 7 2

25 23 16 26

6 7

29 30

TO GROUND DRIVE PUMP

14 4

21

20 17

1

8 5 18

3

8

13

19 10

15

31 9 11

02

ID0229350

133

OPTIONAL AUXILIARY MANIFOLD REF PART NO. NUMBER

QTY

191-360 1. 153-189 1 2. 300-2464 1 3. 155-933 1 4. 155-958 1 5. 155-935 1 6. 105-098 2 7. 105-118 2 8. 105-814 2 9. 116-636 1 10. 154-300 1 11. 159-731 1 12. 515-165 1 13. 110-332 1 14. 501-325 1 15. 105-003 1 16. 115-755 1 17. 154-330 1 18. 110-353 2 19. 155-174 1 20. 515-586 1 21. 155-936 1 22. 154-326 1 23. 110-126 1 24. 153-499 1 25. 154-345 2 26. 117-672 1 27. 153-573 500-736 1 28. 501-829 29. 105-940 2 30. 106-596 2

DESCRIPTION

REMARKS

HYD MANIFOLD CONVERSION KIT AUXILIARY MANIFOLD MANIFOLD BRACKET QDC ADAPTER (12-12S/J) TRICK QDC BODY (12-14S) DUST CAP (1/2"-3/4") BOLT (3/8-NC X 3") WASHER (3/8") FLG LOCKNUT (3/8-NC) BULK HOSE (3/4", SOLD PER FT) CONNECTOR (10O-12S90) S/O COUPLER (12OFX-12H90) HOSE (10OFX-64"-3000) BOLT-ON CLAMP (1-5/8") FLG LOCK BOLT (5/16-NC X 5/8") FLG LOCKNUT (5/16-NC) ABRASION SLEEVE (1.59" X 60") PLUG (06O) HOSE CLAMP (3/4" TO 1-1/2") S/O COUPLER (12S-12H90) HOSE (06OFX90-21"-3000) DUST PLUG (1/2"-3/4") CAP (06OF) BOLT-ON CLAMP (1/2") POWER BEYOND SLEEVE ELBOW RUN TEE (06S-06O-06O) ABRASION SLEEVE (1.00" X 20") HYD CONTROL VALVE (5-SPOOL) PLUG (SD5 THD) FLUSHING VALVE WASHER (5/8") LK SCREW (M14-2.00X30MM,EPXY)

INCLUDES REF. NO.'S 1-18, 20-26, and 29-30

USE 1 @ 6"

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

02

ID0229350

134

TOW VALVE HYDRAULICS

10

6 9 12

8 3

11 14

15

5

7 1 2

4

05

13

ID0111826

135

TOW VALVE HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

QTY

215-072 1 154-221 1 154-342 1 105-2019 2 105-095 6 515-586 1 105-085 2 117-672 1 154-345 1 501-829 1 313-514 515-586 154-228 1 300-7818 2 328-468 1

DESCRIPTION

SOLENOID CONTROL VALVE CONNECTOR (06S-06O) CONNECTOR (06S-06O90) BOLT (1/4-NC X 5-1/4") WASHER (1/4") HOSE (06OFX90-21"-3000) LOCKNUT (1/4-NC) ABRASION SLEEVE (1.00" X 20") RUN TEE (06S-06O-06O) FLUSHING VALVE SEAT DECK MOUNT HOSE (06OFX90-21"-3000) UNION (06O-06OFX90) SPACER STRAP

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1.

REFER TO A222/A323/A422 MOUNTING INSTRUCTIONS

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

05

ID0111826

136

STEERING HYDRAULICS

1 3 3

7

2

18

14

4 18

P LS EF

16

5

CF

9 6

17 10

8 8 4

8 19

11

4 15

DANA 44

LS (LOAD SENSE)

R (RT. STEERING) 13 P (PRESSURE) 13 4

L (LF STEERING)

T (TANK)

12 DANA 60

07

ID0027419

137

STEERING HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

QTY

DESCRIPTION

155-672 1 ORBITROL COLUMN 150-6406 1 POWER STEERING VALVE 157-974 1 POWER STEERING VALVE 158-256 2 CONNECTOR (04O-08S90,XL) 154-252 AR CONNECTOR (04S-04O90) 115-713 1 ABRASION SLEEVE (1.59" X 24") 515-585 1 HOSE (04OFX45-70"-3000) 515-074 1 HOSE (04OFX90-77"-3000) 154-669 3 HOSE (04OFX-50"-3000) 154-261 1 CONNECTOR (04O-08S) 115-755 1 ABRASION SLEEVE (1.59" X 60") 151-038 1 CYL (2.0" X 1.0" X 4.0") 151-039 1 CYL (2.0" X 1.0" X 5.0") 515-021 2 HOSE (04OFX45-52"-3000) 158-901 - PRIORITY VALVE 159-412 - RETURN MANIFOLD 154-278 1 CONNECTOR (04S-04O) 117-717 1 ABRASION SLEEVE (1.00" X 40") 154-276 2 CONNECTOR (04O-08S90) 154-263 1 CONNECTOR (04S-04045)

REMARKS

SEE FOOTNOTE 2 SEE FOOTNOTE 1 USE 1 WITH DANA 44, 2 WITH DANA 60 & 1 ON RETURN MANIFOLD

DANA 44

DANA 44 DANA 60 DANA 60

DANA 44

NOT SHOWN:

FOOTNOTES:

1. 157-974 OLD STYLE STEERING MOTOR, USE SEAL REPAIR KIT 190-913.

2. 150-6406 BEGINS WITH S/N: CMWRT40______, USE SEAL REPAIR KIT 500-3400,

NOTE:

REFER TO O-RING CHART (800-301)IN THE BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

07

ID0027419

138

139

140

BACKFILL BLADE HYDRAULICS

26

23

2

24 1

C

D

3

22 4

20 6 19

13 B A

C 21 8 20

9 11 10

7 D

9

A

28

3

5

29 21 25

B

14

12

18

19

27 SEE FOOTNOTE 1

17 15

13 30

15

16 31

06

ID0027422

141

BACKFILL BLADE HYDRAULICS REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

1 1 2 1 2 1 1 1 2 1 1 1 2 1 2 1 1 1 2 2 2 1 1 1 1 1 2 2 1 1

154-250 154-220 154-730 117-603 154-285 154-705 154-651 117-670 515-065 115-776 154-252 154-278 151-039 154-702 154-226 151-040 115-713 110-169 125-770 125-771 154-316 117-707 514-018 514-118 515-509 111-077 346-344 154-265 154-296 125-772 125-771

DESCRIPTION

CONNECTOR (04O-06S45) CONNECTOR (04O-06S) HOSE (04OFX45-66"-3000) ABRASION SLEEVE (1.59" X 62") BK CONNECTOR (04O-04O45BK) HOSE (04OFX90-60"-3000) HOSE (04OFX-66"-3000) ABRASION SLEEVE (1.00" X 10") HOSE (04OFX90S-14"-3000) ABRASION SLEEVE (1.59" X 7") CONNECTOR (04S-04O90) CONNECTOR (04S-04O) CYL (2.0" X 1.0" X 5.0") HOSE (04OFX-30"-3000) CONNECTOR (04O-06S90) CYL (2.50" X 1.25" X 5.0") ABRASION SLEEVE (1.59" X 24") WORM CLAMP (2.812" TO 3.750") COMPOSITION BUSHING (1.000") COMPOSITION BUSHING (1.250") RUN TEE (04S-04O-04O) ABRASION SLEEVE (1.59" X 56") CONNECTOR (04O-06S, ORF) CONNECTOR (04O-06S45, ORF) HOSE (04OFX-28"-3000) VINYL CAP (1.625") HOSE MOUNT UNION RUN TEE (04OX-04O-04O) HEX CAP (04OF) COMPOSITION BUSHING (1.50") COMPOSITION BUSHING (1.25")

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1.

ITEMS 28 AND 29 USED ONLY WITH AUXILIARY MANIFOLD KIT (604-981).

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

06

ID0027422

142

TILT BLADE HYDRAULICS

1 14 16

2 15 3

3

4

5 5

17 8

6

9

18

13 7 10

22 11 19 20 21

03

12

ID0229351

143

TILT BLADE HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

QTY

110-439 1 154-220 1 154-964 2 115-938 1 154-285 2 154-702 2 300-4028 1 115-713 1 154-252 2 110-169 1 151-041 1 125-771 1 125-770 1 365-478 1 514-018 1 106-539 1 346-344 1 106-162 2 106-386 2 154-275 2 154-715 1 154-802 1

DESCRIPTION

REMARKS

HANDLE (3/8-NC, BLACK) CONNECTOR (04O-06S) HOSE (04OFX90-70"-3000) ABRASION SLEEVE (1.59" X 66") BK CONNECTOR (04O-04O45BK) HOSE (04OFX-30"-3000) HOSE MOUNT ABRASION SLEEVE (1.59" X 24") CONNECTOR (04S-04O90) WORM CLAMP (2.812" - 3.750") CYL (2.0" X 1.0" X 3.0") COMPOSITION BUSHING (1.25") COMPOSITION BUSHING (1") LEVER (5.88") CONNECTOR (04O-06S, ORF) JAM NUT (M8-1.25) HOSE MOUNT FLG SCREW (M8-1.25 X 20MM) FLG LOCKNUT (M8-1.25) BK CONNECTOR (04O-04OBK) HOSE (04OFX90S-18"-3000) HOSE (04OFX90S-26"-3000)

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

03

ID0229351

144

145

146

147

148

HYDRAULIC PUMP 9 TOOTH SPLINE

2

1

SERIES ID MARK

A

809-513

149

HYDRAULIC PUMP 9 TOOTH SPLINE REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

158-459 500-470 500-966 157-041

1 1 1

HYDRAULIC PUMP SEAL REPAIR KIT SEAL REPAIR KIT O-RING (152 D70)

USE WITH 25 SERIES USE WITH 26 SERIES SEE FOOTNOTE 1

1.

2.

FOOTNOTES

1. THIS O-RING IS NOT PART OF THE SEAL KIT & MUST BE ORDERED SEPARATELY. 2. INSTALLATION INSTRUCTIONS 051-002

NOTE:

A

809-513

150

HYDRAULIC CONTROL VALVE

8

4

2

14

21

16

LS

6

P

7

3

EF CF

12

1 11

13 33

10

9 5

15

40 41

35

36

19

23 17

37

34

42 20

31

38

44

34 32

36

45

24 25 24

39

26

39

24

43

32

29

19

22

28

27 20 18 30

29 153-572

500-736 500-736

153-573

BOOM LIFT TILT LIFT

BOOM LIFT REAR STEER TILT LIFT SWING

SWING

05

ID0027420

151

HYDRAULIC CONTROL VALVE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

QTY

153-572 1 153-573 1 365-479 1 499-022 1 154-323 1 154-391 1 365-478 1 110-439 1 110-442 1 105-178 3 105-117 3 105-089 3 155-163 1 159-147 1 515-048 1 105-826 4 117-706 1 105-814 4 159-412 110-958 2 105-818 4 154-298 1 116-044 AR 156-123 1 110-026 4 116-044 1 156-109 1 150-4462 1 154-287 1 313-540 2 107-873 2 365-448 1 110-879 4 154-250 1 154-706 2 117-655 1 154-220 2 149-136 1 105-821 2 105-085 4 154-226 2 154-296 2 514-118 1 178-973 4 154-719 2 154-297 2

DESCRIPTION

HYD CONTROL VALVE (4-SPOOL) HYD CONTROL VALVE (5-SPOOL) LEVER (4.50") LEVER (M12-1.75 X 200MM) CONNECTOR (08S-10O90) CONNECTOR (08S-10O) LEVER (5.88") HANDLE (3/8-NC, BLACK) HANDLE (3/8-NC, GREEN) BOLT (5/16-NC X 2-1/2",GD8) WASHER (5/16") LOCKNUT (5/16-NC) REDUCER (08S-06SF) QDC ADAPTER (02-06S) HOSE (10OFX45-18"-3000) FLG LK BOLT (3/8-NC X 1") ABRASION SLEEVE (1.59" X 17") FLG LOCKNUT (3/8-NC) RETURN MANIFOLD BACKUP PLATE BOLT (1/4-NC X 1-1/2") CONNECTOR (10S-10O90) BULK HOSE (5/8", SOLD PER 1") HYD LINE (10OFX-10H) WORM CLAMP (1/2" X 1-1/4") BULK HOSE (5/8", SOLD PER 1") HYD LINE (10H-10H) S/O COUPLER (10S-10H45) CONNECTOR (16S-16O90) MANIFOLD STRAP BOLT (1/4-NC X 4-1/4") CONTROL VALVE BRACKET BOLT-ON CLAMP (5/8",SOLD PER SET) CONNECTOR (04O-06S45) HOSE (04OFX90S-40"-3000) ABRASION SLEEVE (1.59" X 38") CONNECTOR (04O-06S) HYD LOCKOUT VALVE FLG LK BOLT (1/4-NC X 1-3/4") LOCKNUT (1/4-NC) CONNECTOR (04O-06S90) CAP (04OF) CONNECTOR (040-06S45, ORF) SPACER HOSE (04OFX-10"-3000) PLUG (04O)

REMARKS

USE 1 @ 8"

USE 1 @ 4.5"

FOR RT45 T4i & BEFORE FOR RT45 T4 ONLY FOR RT45 T4 ONLY

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN THE BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

05

ID0027420

152

HYDRAULIC CONTROL VALVES 3610,3700, 5700, RT36, RT40, RT45

1 2 3 4 29 5 21

26

19

10 11

28

27

13 14

25 6

7 8 9

15 24

22 23 18

17 16

10 11

12 13 14

20 21 19 18 17 (OLD STYLE KIT)

04

16

15

ID0026658

153

HYDRAULIC CONTROL VALVES 3610,3700, 5700, RT36, RT40, RT45 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

QTY

DESCRIPTION

516-035 HYDRAULIC CONTROL VALVE(4-SPOOL) 516-045 HYDRAULIC CONTROL VALVE(5-SPOOL) 107-431 1 SCREW (M5 X 55MM) 500-731 1 SPOOL BONNET 153-063 AR VALVE SPRING KIT 155-074 1 PLUG (08S, SOC, FM) 157-218 AR O-RING (___ D70) 157-744 1 SEAL, JOYSTICK 153-080 1 VALVE FLANGE 107-432 2 WASHER, SCHNORR 107-428 2 SCREW ( M5X10MM) 106-078 3 NUT (M8-1.25) 499-133 1 PIN, ROD END 499-006 1 JOYSTICK LEVER ASSEMBLY 107-534 3 A6 GALVANIZED WASHER 107-322 3 SCREW (M6-1.00X25MM,SOC,12.9) 499-135 1 RUBBER BELLOW 499-137 1 CLAMP, BELLOW 499-134 1 ARTICULATION HOLDER 499-138 1 ROD END 107-427 4 SCREW ( M5 X 14MM) 499-166 1 FULCRUM (JOYSTICK) 499-139 2 ARTICULATED JOINT (ASSY) 107-429 AR SCREW ( M5 X 35MM) 499-143 AR LEVER, VALVE 153-065 1 RELIEF VALVE KIT 153-066 1 16X20X1 SEAL RING 153-067 1 15.80X1.78 70 SEAL RING 157-218 AR O-RING (___ D70) 149-664 1 CHECK VALVE 153-062 1 VALVE SPRING KIT 499-331 1 VALVE SPRING KIT

REMARKS

OBSOLETE OBSOLETE

INCLUDES REF NO.'S 10, 11, 13 - 19, 21 AND NEW STYLE FULCRUM. USE LOCTITE 243 OR EQUIVALENT.

OBSOLETE

OBSOLETE SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. IF REPLACING VALVE SPRING KIT 153-062 (SQUARE SPRING HOUSING) WITH 499-331 (ROUND SPRING HOUSING) YOU MUST ALSO ORDER 500-1049, SPOOL.

NOTE:

04

ID0026658

154

HYDRAULIC CONTROL VAVLES 3610, 3700, 5700, RT36, RT40, RT45

3 4 26 1

21

2

19

10 11

27

13 14

25

16 22 23

24

6

18 17 15

7 8 9

12

10 11 13 14

20 21 19 18 17 (OLD STYLE KIT)

06

16

15 ID0134739

155

HYDRAULIC CONTROL VAVLES 3610, 3700, 5700, RT36, RT40, RT45 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

QTY

153-572 153-573 153-062 1 499-331 1 149-664 1 153-063 AR 155-074 1 157-218 AR 157-744 1 153-080 1 107-432 2 107-428 2 106-078 3 499-133 1 499-006 1 107-534 3 107-322 3 499-135 1 499-137 1 499-134 1 499-138 1 107-427 4 499-166 1 499-139 2 107-429 AR 499-143 AR 153-065 1 153-066 1 153-067 1 157-218 AR

DESCRIPTION

HYDRAULIC CONTROL VALVE(4-SPOOL) HYDRAULIC CONTROL VALVE(5-SPOOL) VALVE SPRING KIT VALVE SPRING KIT CHECK VALVE VALVE SPRING KIT PLUG (08S, SOC, FM) O-RING (___ D70) SEAL, JOYSTICK VALVE FLANGE WASHER, SCHNORR SCREW ( M5X10MM) NUT (M8-1.25) PIN, ROD END JOYSTICK LEVER ASS'Y A6 GALVANIZED WASHER SCREW (M6-1.00X25MM,SOC,12.9) RUBBER BELLOW CLAMP, BELLOW ARTICULATION HOLDER ROD END SCREW ( M5 X 14MM) FULCRUM (JOYSTICK) ARTICULATED JOINT (ASSY) SCREW ( M5 X 35MM) LEVER, VALVE RELIEF VALVE KIT 16X20X1 SEAL RING 15.80X1.78 70 SEAL RING O-RING (___ D70)

REMARKS

OBSOLETE, SEE FOOTNOTE 1

OBSOLETE OBSOLETE

INCLUDES REF NO.'S 10, 11, 13 - 19, 21 AND NEW STYLE FULCRUM. USE LOCTITE 243 OR EQUIVALENT.

OBSOLETE

NOT SHOWN:

FOOTNOTES:

1. IF REPLACING VALVE SPRING KIT 153-062 (SQUARE SPRING HOUSING) WITH 499-331 (ROUND SPRING HOUSING) YOU MUST ALSO ORDER 500-1049, SPOOL.

NOTE:

06

ID0134739

156

157

158

159

160

161

162

163

164

HYDRAULIC CYLINDER

2.5" ID BARREL X 1.25" OD ROD X 5.0" STROKE

2

1 3 4

5

6

7

07

ID0022940

165

HYDRAULIC CYLINDER

2.5" ID BARREL X 1.25" OD ROD X 5.0" STROKE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

151-040 190-166 150-779 150-292 106-097 150-776 150-773 150-423

NOT SHOWN: 259-100 259-236 259-242 259-243 259-188

QTY

DESCRIPTION

REMARKS

INCLUDES REF NO.'S 1 THRU 7

1 1 1 1 1 1 1

CYL (2.5" X 1.25" X 5") SEAL REPAIR KIT (2.5" X 1.25") LOCK RING (2.5") CYLINDER BARREL (2.5") FLG BOLT (5/8-NC X 1-3/4",GD8) CYLINDER PISTON (2.5" X 1.25") CYLINDER HEAD (2.5" X 1.25") CYLINDER ROD (1.25")

SEE FOOTNOTE 1

U-SEAL INSTALLER (1"-1.499") WIPER INSTALLER (1.25") PISTON SEAL INSTALLER (2.5") PISTON INSTALLER (2.5") CYL HEAD SPANNER - TWO PIN

NOT SHOWN:

FOOTNOTES:

1. CLEAN AND DRY THREADS. APPLY RED LOCTITE (RC 271 OR 277). TORQUE TO 180-200 FT-LBS (245-270 NM)

NOTE:

07

ID0022940

166

NOTES:

ID0134963

167

ELECTRICAL

SEE TECHNICAL SUPPLEMENT FOR FURTHER ELECTRICAL INFORMATION

ID0134878

168

NOTES:

ID0134963

169

ACCESSORIES

170

LIGHT KIT RT40/45

3

5 2 7 8

6 1

9

4

01

ID0454162

171

LIGHT KIT RT40/45

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

191-429 217-007 323-596 323-595 217-762 107-087 331-568 105-814 215-489 116-203

QTY

DESCRIPTION

LIGHT KIT 3 WORKING LIGHT (CLEAR, RECT) 2 FRONT LIGHT BRACKET 1 REAR LIGHT BRACKET 1 ROCKER SWITCH (SPDT) 6 U-BOLT (3/8-NC X 5") 3 LIGHT BAR 12 FLG LOCKNUT (3/8-NC) 1 RALLY WRAP (3/8", SOLD PER 1"") 4 GROMMET (9/16")

REMARKS

INCLUDES REF NO.'S 1-9 AND ALL LISTED IN NOT SHOWN

USE 27"

NOT SHOWN:

157-645 213-212 214-103 214-104 217-811 217-826 700-065

6 WEATHER-PAC SEAL (2.80MM) 1 HARNESS, 2-POST LIGHT 3 MALE CONNECTOR (2-WAY) 3 PACKARD MALE TERMINAL 1 FUSE (ATC, 15 AMP) MINI RELAY (SPD) 1 WORKLIGHTS ON/OFF

FOOTNOTES:

NOTE:

01

ID0454162

172

FRONT COUNTERWEIGHT

10

11

1

11 2

3 10

12

4

5

7

9 6 8

A

809-516

173

FRONT COUNTERWEIGHT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

QTY

100-267 313-135 1 313-134 1 313-103 1 313-107 1 301-8575 2 181-398 2 375-080 AR 105-422 2 105-372 2 105-830 28 105-833 16 301-8576 2

DESCRIPTION

REMARKS

FRONT COUNTERWEIGHT KIT RIGHT SIDE PLATE LEFT SIDE PLATE COUNTERWEIGHT FRAME WEIGHT MOUNT BOLT SPACER (2.750) SPACER COUNTERWEIGHT (100 LBS) WASHER (3/4") LOCKNUT (3/4-NC) FLG LOCK BOLT(1/2-NC X 1-1/4") FLG LOCKNUT (1/2-NC) SPACER (6.250)

INCL REF NO.'S 1 THRU 6 & 8 THRU 12. SEE FOOTNOTE 1

SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 1

SEE FOOTNOTE 2

FOOTNOTES

1. WEIGHTS (REF. NO. 7) MUST BE ORDERED SEPARATELY. 2. IF USING 4 WEIGHTS USE 2 EACH OF 301-8576 AND 181-398.

181-398.

IF USING 8 WEIGHTS USE TWO EACH OF 301-8575 AND

NOTE:

A

809-516

174

PERSONNEL PROTECTION KIT

2

1

3

02

ID0043991

175

PERSONNEL PROTECTION KIT REF PART NO. NUMBER

1 2 3

191-483 327-267 300-1747 195-972

QTY

DESCRIPTION

PERSONNEL PROTECTION KIT 1 EXHAUST STACK PROTECTOR 2 MUFFLER BRACKET 2 U-BOLT CLAMP (1-3/4")

REMARKS

INCLUDES REF. NO.'S 1-3 NUTS SHOULD BE PLACED ON OUTSIDE OF U-BOLT CLAMP NUTS INCLUDED WITH U-BOLT CLAMP

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0043991

176

BACKUP ALARM KIT

3

3

8

7

7

4 2

2

1 6 6

02

8

5

ID0229353

177

BACKUP ALARM KIT REF PART NO. NUMBER

1 2 3 4 5 6 7 8

190-1508 300-6090 106-381 106-386 306-602 217-703 106-058 106-040 105-215

QTY

1 2 2 1 1 2 2 2

DESCRIPTION

BACKUP ALARM KIT SWITCH BRACKET FLG LK SCREW (M8-1.25 X 25MM) FLG LOCKNUT (M8-1.25) ALARM OMNI LEVER SWITCH BOLT (#6-32 X 1-1/8", RD SLT) EXT STAR WASHER (#6) NUT (#6-32)

REMARKS

INCLUDES REF NO.'S 1-8 & ITEMS LISTED AS NOT SHOWN REFER TO FOOTNOTE 1

NOT SHOWN:

214-103 214-104 157-645 215-1571

1 (2-WAY) MALE CONNECTOR 2 PACKARD MALE TERMINAL 2 WEATHER-PAC SEAL (2.80MM) 1 BACKUP ALARM HARNESS

FOOTNOTES:

1. SWITCH BRACKET (300-6090) REQUIRES USING EXISTING PUMP HARDWARE FOR MOUNTING. NOTICE: USE LOCTITE 271, OR EQUIVALENT, WHEN RE-INSERTING HARDWARE AFTER MOUNTING SWITCH BRACKET.

NOTE:

02

ID0229353

178

NOTES:

ID0134963

179

MISCELLANEOUS

ID0135063

180

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

181

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

182

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

183

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

184

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which is D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

185

186

RT45 Related Publications Component

Ass’y

P/N

Model: RT45 ................... Parts Manual .......................................................... .............053-1366 RT45 ................... Technical Supplement ........................................... .............053-1355 RT45 ................... Operators Manual .................................................. .............053-1982 RT45 ................... Repair Guide (Service Manual) .............................. ................. N/A Engine: Deutz .................. Parts Manual - F3M2011F .............................. 194-529 .... 053-115 Deutz .................. Parts Manual - F3M2011F ............................. 195-1063 ... 053-115 Deutz .................. Parts Manual – D2011L03o ........................... 195-1090 .. 053-1235 Deutz .................. Operators Manual - F3L1011F ............................... ............. 054-115 Deutz ................... Operators Manual – D2011L03o............................. .............053-1236 Deutz .................. Service (Shop) Manual - F3L1011F ....................... ............. 055-074 Deutz ................... Service (Shop) Manual – D2011L03o ..................... .............053-1237 Differential: Dana ................... Service (Shop) Manual - 44 Ls Front, Ends .... 161-081 .... 055-021 Dana ................... Service (Shop) Manual - 44 Ls Front, Begins . 161-138 .... 055-021 Dana ................... Service (Shop) Manual - 44 Ls Rear ............... 161-111 .... 055-021 Dana ................... Service (Shop) Manual - 44 Ls Rear Steer ..... 161-199 .... 055-021

Filters Engine: Air Filter Parts Ass’y ........................................................................................... 194-093 Element (primary) ................................................................................ 194-038 Element (secondary) ........................................................................... 194-039 Oil Filter Element (spin-on) - Deutz .................................................................... 195-849 Fuel Filter Element (spin-on) - Deutz ................................................................. 195-807 Hydraulic: Oil Filter Element (1-3/8-UNF, spin-on) .............................................................. 159-074 Oil Strainer (24S-20SF) ...................................................................................... 110-336

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ............................... 190-051 O-ring Repair Kit - Field Service (46 different O-rings) ...................................... 190-052

02

ID0240526

187

ID0040564

188

ID0135281