Ditch Witch RT12 / RT16 / RT20 / RT24 EP3 Parts Manual 053-2438 PDF

RT12/RT16/RT20/ RT24 with EP3 engines

Parts Manual

Issue 16

053-2438

1

RT12/RT16/RT20/RT24 with EP3 engines ISSUE NO. 16PL-04/19 For Replacement Copy Order P/N 053-2438

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works.

This manual contains information concerning the following models: RT12, RT16, RT20, and RT24 Tractors with EP3 engines

Copyright 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 by The Charles Machine Works, Inc. , Ditch Witch, CMW, and Roto Witch are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY _________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy August, 2016

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY • All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse, abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 06

ID0134872

CONTENTS______________________ Decals

Decal Location – RT12 .................................. 8 Decal Location – RT16 ................................ 10 Decal Location – RT20 ................................ 12 Decal Location – RT24 ................................ 14

Engine Components

Engine Assembly – RT12............................. 18 Engine Assembly – RT16............................. 20 Engine Assembly – RT20............................. 22 Engine Assembly – RT24............................. 24 Fuel System – RT20/RT24 ............................ 26 Fuel System – RT24..................................... 28

Power Train

Chain Drive & Auger – Early Style ................ 42 Hub & Brake – RT12/RT16............................ 32 Hub & Brake – RT20/RT24............................ 36 Hub & Brake – RT24.................................... 34 Tire & Wheel ............................................. 38 Trail Wheel ................................................ 40

Frame Components

Console Tower .......................................... 46 Outboard Bearing...................................... 52 Pivot .......................................................... 48 Pivot – Earlier Style....................................... 50

Control Components

Controls ..................................................... 56

Hydraulics

Chain Motor Hydraulics ............................ 64 Cylinders – 2.0" X 1.0" ................................. 70 Filter Hydraulics ........................................ 60 Grease Cylinder ......................................... 74 Lift Hydraulics............................................ 68 Motor ........................................................ 72 Oil Cooler .................................................. 62 Schematic .................................................. 76 Wheel Motor Hydraulics ........................... 66

Electrical

Battery....................................................... 80 Components – RT20/RT24 ........................... 90 Diagram – RT12 Frame Harness ................... 100 Fan Harness – RT16 .................................... 84 Fan Harness – RT20/24 ................................ 86 Schematic – RT12 ....................................... 92 Schematic – RT20/RT24 ............................... 96 Tach/Hour Meter – RT12/RT16 ................... 82

Accessories

24" Split Boom Assembly ........................ 126 30" Split Boom Assembly ........................ 128 36” Split Boom Assembly ........................ 130 Backfill Blade ........................................... 116 Boring Attachment - RT12/RT16 ................ 112 Boring Attachment - RT20/RT24 ................ 114 Duratooth Chains – 35K, 2P ...................... 134 Duratooth Chains – 35K, 4P ...................... 132 Duratooth Chains – 35K, Alligator 2P .......... 136 Duratooth Chains – 35K, Shark 2P .............. 138 Shark & Alligator Chains – 2P .................. 140 Grease Boom, Roller ............................... 118 Grease Boom, Sprocket .......................... 124 Low Profile Sprocket Boom ..................... 122 Restraint Bar ........................................... 106 Rigid Track Assembly .............................. 152 Roller Boom............................................. 120 Special Tools – Alligator Bit Puller ............... 142 Special Tools – Alligator Bit Punch ............... 144 Special Tools – Chain Jaws ......................... 146 Weights – RT12/RT16 ................................. 108 Weights – RT20/RT24................................. 110 Wheel Track Assembly ............................ 150 Wheel Track Assembly – RT20/RT24 ......... 148 Wheel Track Rotation Stops.................... 154

ID0287446

5

6

CONTENTS______________________ Miscellaneous

Bolt/Nut Torque Chart ............................ 158 Filters....................................................... 164 Optional Kits............................................ 165 Related Publications ............................... 164 Replacement O-Ring Chart ..................... 163 Warranty Registration............................. 168

ID0287446

7

DECALS

ID0135069

8

DECAL LOCATION RT12 15

RESTRAINT BAR 27

12 22 25 23 9

8 6 7

17

2

13

19

26

21 3

14

5

11 1 28 4

12

24 6 7 20 10 18 16

2 6

10

7

ID0287879

9

DECAL LOCATION RT12 REF PART NO. NUMBER

270-4914 1 275-355 2 270-1156 3 275-419 4 270-5007 5 275-173 6 274-442 7 274-318 8 274-187 9 270-4520 10 700-063 11 270-4522 12 270-4988 13 270-4557 14 270-4549 15 270-4703 16 270-5700 17 270-4990 18 270-4873 19 270-4885 20 270-4993 21 274-208 22 275-032 23 700-203 24 270-5542 25 273-059 26 270-6406 27 273-058 28 270-6773

QTY

1 2 1 1 1 3 3 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1

DESCRIPTION

RT12 SERVICE DECAL KIT CAUTION HOT PARTS DECAL DANGER, CHAIN & AUGER WARNING NO FLAME LOGO FUEL TANK (GASOLINE) LIFT LOCATION TIE DOWN LOCATION DANGER TURNING SHAFT HAZARD ALERT PARKING BRAKE HYDRAULIC OIL CAP CONTROL PANEL STACKED LOGOTYPE ROTO-WITCH CONTROL VALVE ROTO-WITCH OPERATOR INSTRUCTIONS DAILY MAINTENANCE SCHEDULE RT12 LT MODEL ID GREASE ZERK CAUTION TIP OVER RT12 RT MODEL ID FUEL SHUTOFF ALERT HAND THROTTLE OPERATION IGNITION DECAL NOTICE REFUELING DANGER STRIPE 1.50” X 18” OPERATOR MANUAL REPLACEMENT DANGER 1.50” X 18” PATENT

REMARKS

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT.

NOT PART OF KIT.

FOOTNOTES: 1. PART OF ROTO-WITCH KIT 190-1432

10

ID0287879

10

DECAL LOCATION RT16

15

RESTRAINT BAR 24 12 21

9 8 6 7

17

2

13

19

23 22 3

14

5

11 1

25

4

12

6 7 20 10

18 16

09

2 6

7

ID0287967

11

DECAL LOCATION RT16

REF PART NO. NUMBER

270-5014 1 275-355 2 270-1156 3 275-419 4 270-5007 5 275-173 6 274-442 7 274-318 8 274-187 9 270-4520 10 700-063 11 270-4522 12 270-4988 13 270-4557 14 270-4549 15 270-4703 16 270-5700 17 270-4986 18 270-4873 19 270-4885 20 270-4987 21 273-059 22 274-208 23 270-6406 24 273-058 25 270-6773

QTY

DESCRIPTION

1 2 1 1 1 3 3 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1 1 1 1

RT16 SERVICE DECAL KIT CAUTION HOT PARTS DECAL DANGER, CHAIN & AUGER WARNING NO FLAME LOGO FUEL TANK (GASOLINE) LIFT LOCATION TIE DOWN LOCATION DANGER TURNING SHAFT HAZARD ALERT PARKING BRAKE HYDRAULIC OIL CAP CONTROL PANEL STACKED LOGOTYPE ROTO-WITCH CONTROL VALVE ROTO-WITCH OPERATOR INSTRUCTIONS DAILY MAINTENANCE SCHEDULE RT16 LT MODEL ID GREASE ZERK CAUTION TIP OVER RT16 RT MODEL ID DANGER STRIPE 1.50” X 18” FUEL SHUTOFF ALERT OPERATOR MANUAL REPLACEMENT DANGER 1.50” X 18” PATENT

REMARKS

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, APPLY TO TWO SIDES. NOT PART OF KIT.

FOOTNOTES:

1. PART OF ROTO-WITCH KIT 190-1432

09

ID0287967

12

DECAL LOCATION RT20

15

RESTRAINT BAR 19 12 21

9 8 6 7

17

2

13

22

14 11 5 3

1

4

12

6 7 20 10 18 16

09

2 6

7

ID0287968

13

DECAL LOCATION RT20

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

270-4873 270-6773 270-1156 275-419 270-5007 275-173 274-442 274-318 274-187 270-4520 700-063 270-4522 270-4988 270-4557 270-4549 270-4703 270-5700 270-4991 270-4873 273-058 270-4994 273-059 270-6406

QTY

DESCRIPTION

1 2 1 1 1 3 3 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1

RT20 SERVICE DECAL KIT PATENT DANGER, CHAIN & AUGER WARNING NO FLAME LOGO FUEL TANK (GASOLINE) LIFT LOCATION TIE DOWN LOCATION DANGER TURNING SHAFT HAZARD ALERT PARKING BRAKE HYDRAULIC OIL CAP CONTROL PANEL STACKED LOGOTYPE ROTO-WITCH CONTROL VALVE ROTO-WITCH OPERATOR INSTRUCTIONS DAILY MAINTENANCE SCHEDULE RT20 LT MODEL ID GREASE ZERK DANGER 1.50” X 18” RT20 RT MODEL ID DANGER STRIPE 1.50” X 18” OPERATOR MANUAL REPLACEMENT

REMARKS

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT.

NOT PART OF KIT, APPLY TO TWO SIDES OF RESTRAINT BAR

FOOTNOTES:

1. PART OF ROTO-WITCH KIT 190-1432

09

ID0287968

14

DECAL LOCATION RT24

15

RESTRAINT BAR 19 12 21

9 8 6 7

17

2 22 13 14

11 1

5

3

4

12

6 7 20 10

18 16

09

2

6

7

ID0287969

15

DECAL LOCATION RT24

REF PART NO. NUMBER

270-4873 1 270-6773 2 270-1156 3 275-419 4 270-5007 5 275-173 6 274-442 7 274-318 8 274-187 9 270-4520 10 700-063 11 270-4522 12 270-4988 13 270-4557 14 270-4549 15 270-4703 16 270-5700 17 270-4992 18 270-4873 19 273-058 20 270-4995 21 273-059 22 270-6406

QTY

DESCRIPTION

1 2 1 1 1 3 3 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1

RT24 SERVICE DECAL KIT PATENT DANGER, CHAIN & AUGER WARNING NO FLAME LOGO FUEL TANK (GASOLINE) LIFT LOCATION TIE DOWN LOCATION DANGER TURNING SHAFT HAZARD ALERT PARKING BRAKE HYDRAULIC OIL CAP CONTROL PANEL STACKED LOGOTYPE ROTO-WITCH CONTROL VALVE ROTO-WITCH OPERATOR INSTRUCTIONS DAILY MAINTENANCE SCHEDULE RT24 LT MODEL ID GREASE ZERK DANGER 1.50” X 18” RT24 RT MODEL ID DANGER STRIPE 1.50” X 18” OPERATOR MANUAL REPLACEMENT

REMARKS

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT. NOT PART OF KIT.

FOOTNOTES:

1. PART OF ROTO-WITCH KIT 190-1432

09

ID0287969

16

NOTES:

ID0134963

17

ENGINE COMPONENTS

ID0134845

18

ENGINE ASSEMBLY RT12

7 5 6

1 2 4

10

14 19 19

18

16

18 13 17

06

11 8

9

15

ID0280782

19

ENGINE ASSEMBLY RT12

REF PART NO. NUMBER

QTY

1 195-1606 2 165-923 3 107-194 4 106-561 5 300-8766 6 179-909 7 106-541 8 105-117 9 105-158 10 106-395 11 156-982 12 106-200 13 105-677 14 150-2772 15 105-031 16 150-2330 17 105-052 18 160-1177

1 1 1 2 1 4 4 1 4 2 1 3 3 1 1 1 1 1

DESCRIPTION

ENGINE (HONDA IGX390 11.7 HP, ELECT) KEY (1/4 X 2.00) FLG SCREW (M8-1.25 X 50MM) LOCKNUT (M8-1.25,PRV TRQ,10.9) MOUNT SLEEVE (.259" X .475") FLG SCREW (M6-1.00 X 20MM) WASHER (5/16") CAM WASHER (3/8") WASHER (M8) O-RING (-138 D70) FLG LK SCREW (M8-1.25 X 45MM) FLG BOLT (3/8-NC X 1-1/4") PUMP 8.2CC THROUGH DRIVE BOLT (3/8-NC X 1") TANDEM PUMP 6 CC BOLT (3/8-NC X 1-1/4") PUMP MOUNT KIT

REMARKS

INCL'S REF NO. 2, SEE FOOTNOTE 4 & NOT SHOWN FOR SERVICE PARTS

SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 1

NOT SHOWN:

155-910 195-2002 195-2015 194-105

OIL FILTER ELEMENT (1-UNF) AIR FILTER PRE-FILTER SPARKPLUG

FOOTNOTES:

1. USE LOCTITE 242 OR EQUIVALENT ON COUPLER SCREWS 2. SEAL REPAIR KIT 9900205-00 3. SEAL REPAIR KIT 500-2301 4. USE UPTIME RT12 HONDA KIT 190-1759. INCLUDES: 155-910, 195-2002 & 194-105

NOTE:

06

ID0280782

20

ENGINE ASSEMBLY RT16

1 16 2 2

15 10

4 9

11

14

3

13 5 7 12 6 8

06

ID0280787

21

ENGINE ASSEMBLY RT16

REF PART NO. NUMBER

QTY

1 195-1579 2 160-1177 3 150-2330 4 150-2772 5 105-677 6 105-158 7 105-052 8 105-031 9 106-200 10 106-395 11 156-982 12 105-117 13 107-194 14 105-091 15 106-561 16 165-923

1 1 1 1 3 6 2 1 3 2 1 1 1 1 2 1

DESCRIPTION

ENGINE (16 HP B & S VANGUARD) W/TANK PUMP MOUNT KIT TANDEM PUMP 6 CC PUMP 8.2CC THROUGH DRIVE FLG BOLT (3/8-NC X 1-1/4") CAM WASHER (3/8") BOLT (3/8-NC X 1-1/4") BOLT (3/8-NC X 1") FLG LK SCREW (M8-1.25 X 45MM) WASHER (M8) O-RING (-138 D70) WASHER (5/16") FLG SCREW (M8-1.25 X 50MM) LOCK WASHER (5/16") LOCKNUT (M8-1.25,PRV TRQ,10.9) KEY (1/4 X 2.00)

REMARKS

REFER TO "NOT SHOWN" SECTION, SEE FOOTNOTE 4 SEE FOOTNOTE 1 & REFER TO "NOT SHOWN" SECTION SEE FOOTNOTE 3 SEE FOOTNOTE 2

NOT SHOWN:

SERVICE PARTS FOR PUMP MOUNT KIT, 160-1177: 160-1193 FLANGED COUPLER (1.000") 160-1194 FLANGED COUPLER (9T .625") 160-1195 SPIDER INSERT SERVICE PARTS FOR ENGINE, 195-1579: 195-1478 AIR FILTER CARTRIDGE 195-1479 AIR FILTER PRE-CLEANER 195-1480 FUEL FILTER 195-1481 FUEL PUMP 195-1482 KEY SWITCH 215-1584 IGNITION KEY 195-1484 SPARK PLUG 195-1485 STARTER 195-1486 TANG BENDER 215-1584 IGNITION KEY 500-2093 OIL FILTER 500-2094 STARTER SOLENOID 500-2521 FUEL TANK 500-3267 OIL DIPSTICK

FOOTNOTES:

1. USE LOCTITE 242 OR EQUIVALENT ON COUPLER SCREWS. 2. SEAL REPAIR KIT 9900205-00 3. SEAL REPAIR KIT 500-2301 4. USE UPTIME RT16 VANGUARD KIT 190-1760. INCLUDES: 195-1478, 195-1479, 195-1480, 500-2093, 195-1484 & 155-910 FILTER ELEMENT (1-UNF).

NOTE:

06

ID0280787

22

ENGINE ASSEMBLY RT20

17

15

18 19

16

10

1 2 11

4 13 12

3

14 2 5

9 8 7

04

9

6

ID0280806

23

ENGINE ASSEMBLY RT20

REF PART NO. NUMBER

QTY

1 195-1604 2 160-1177 3 150-2330 4 150-2363 5 105-677 6 105-031 7 105-117 8 105-052 9 105-158 10 195-1530 11 107-661 12 106-621 13 156-982 14 165-923 15 195-1561 16 196-067 17 215-1626 18 106-164 19 106-387

1 1 1 1 4 2 1 2 4 1 2 2 1 1 1 1 1 1 1

DESCRIPTION

ENGINE (HONDA GX630 20.8 HP, EL) PUMP MOUNT KIT TANDEM PUMP 6 CC PUMP 13.8CC THROUGH DRIVE FLG BOLT (3/8-NC X 1-1/4") BOLT (3/8-NC X 1") WASHER (5/16") BOLT (3/8-NC X 1-1/4") CAM WASHER (3/8") MUFFLER FLG LKNUT (M10-1.50, PRV TRQ) SCREW (M10-1.50 X 45MM, 10.9) O-RING (-138 D70) KEY (1/4 X 2.00) TURNDOWN (1.5" X 90DEG.) U-BOLT CLAMP (1-1/2") BATTERY GROUND STRAP FLG LK SCREW (M10-1.50 X 30MM) FLG LOCKNUT (M10-1.50)

REMARKS

REFER TO "NOT SHOWN" SECTION, SEE FOOTNOTE 5 SEE FOOTNOTE 1 & REFER TO "NOT SHOWN" SECTION SEE FOOTNOTE 2 SEE FOOTNOTE 3 USE LOCTITE 242 OR EQUIVALENT USE LOCTITE 242 OR EQUIVALENT

SEE FOOTNOTE 4

NOT SHOWN:

SERVICE PARTS FOR PUMP MOUNT KIT, 160-1177: 160-1193 FLANGED COUPLER (1.000") 160-1194 FLANGED COUPLER (9T .625") 160-1195 SPIDER INSERT SERVICE PARTS FOR ENGINE, 195-1604: 155-910 FILTER ELEMENT (1-UNF) 195-1533 OIL FILTER 195-1534 AIR FILTER CARTRIDGE (INCLUDES PRE-FILTER) 195-1536 FUEL FILTER 195-1546 SPARK PLUG 195-1581 IGNITION KEY 195-1582 STARTER 195-1583 FUEL PUMP 215-2282 SWITCH ASSEMBLY 500-3269 THROTTLE CABLE

FOOTNOTES:

1. USE LOCTITE 242 OR EQUIVALENT ON COUPLER SCREWS. 2. SEAL REPAIR KIT 9900205-00 3. SEAL REPAIR KIT 500-2301 4. GROUND STRAP MOUNTS TO FRAME AND OPPOSITE END MOUNTS TO ENGINE USING EXISTING MUFFLER MOUNT HARDWARE. 5. USE UPTIME R2O/24 HONDA KIT 190-1761. INCLUDES: 155-910, 195-1533 & 195-1534.

NOTE:

04

ID0280806

24

ENGINE ASSEMBLY RT24

17

19 20 1

21

18

9

2

12 11

2 14 13

4 15

13

16

3 5 10

8 7

07

10 6

ID0254071

25

ENGINE ASSEMBLY RT24

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

195-1532 160-1215 150-2330 150-2363 105-677 105-031 105-117 105-052 195-1530 105-158 106-395 106-561 107-194 105-091 156-982 165-923 195-1561 196-067 215-1626 106-164 106-387

QTY

1 1 1 1 4 2 4 2 1 4 4 4 4 4 1 1 1 1 1 1 1

DESCRIPTION

HONDA ENGINE (GX690) PUMP MOUNT KIT TANDEM PUMP 6 CC PUMP 13.8CC THROUGH DRIVE FLG BOLT (3/8-NC X 1-1/4") BOLT (3/8-NC X 1") WASHER (5/16") BOLT (3/8-NC X 1-1/4") MUFFLER CAM WASHER (3/8") WASHER (M8) LOCKNUT (M8-1.25,PRV TRQ,10.9) FLG SCREW (M8-1.25 X 50MM) LOCK WASHER (5/16") O-RING (-138 D70) KEY (1/4 X 2.00) TURNDOWN (1.5" X 90DEG.) U-BOLT CLAMP (1-1/2") BATTERY GROUND STRAP FLG LK SCREW (M10-1.50 X 30MM) FLG LOCKNUT (M10-1.50)

REMARKS

REFER TO "NOT SHOWN" SECTION, SEE FOOTNOTE 5 SEE FOOTNOTE 1 & REFER TO "NOT SHOWN" SECTION SEE FOOTNOTE 2 SEE FOOTNOTE 3 USE LOCTITE 242 OR EQUIVALENT USE LOCTITE 242 OR EQUIVALENT

SEE FOOTNOTE 4

NOT SHOWN:

SERVICE PARTS FOR PUMP MOUNT KIT, 160-1215: 160-1217 FLANGED COUPLER (1.125") 160-1218 FLANGED COUPLER (9T .625") 160-1219 SPIDER INSERT SERVICE PARTS FOR ENGINE, 195-1532: 155-910 FILTER ELEMENT (1-UNF) 195-1533 OIL FILTER 195-1534 AIR FILTER CARTRIDGE (INCLUDES PRE-FILTER) 195-1536 FUEL FILTER 195-1546 SPARK PLUG 195-1581 IGNITION KEY 195-1582 STARTER 195-1583 FUEL PUMP 215-2282 SWITCH ASSEMBLY 500-3269 THROTTLE CABLE

FOOTNOTES:

1. USE LOCTITE 242 OR EQUIVALENT ON COUPLER SCREWS. 2. SEAL REPAIR KIT 9900205-00 3. SEAL REPAIR KIT 500-2301 4. GROUND STRAP MOUNTS TO FRAME AND OPPOSITE END MOUNTS TO ENGINE USING EXISTING MUFFLER MOUNT HARDWARE. 5. USE UPTIME R2O/24 HONDA KIT 190-1761. INCLUDES: 155-910, 195-1533, 195-1534, 195-1546 & 195-1536.

NOTE:

07

ID0254071

26

FUEL SYSTEM

BEGINS WITH S/N: CMWRT24XCB0000303 (RT24) RT20/24

20 21 12

18

11 18

18

18

3

18

5 2

22 18

15 10

TO EMISSIONS FITTING ON ENGINE AIR INTAKE

4 18

14

6 9

19

16

25

13 1

17

12

5

8 7

24 23

06

26

ID0268941

27

FUEL SYSTEM

BEGINS WITH S/N: CMWRT24XCB0000303 (RT24) RT20/24 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

1 FUEL TANK 1 GROMMET (.362") 1 S/O COUPLER (04H-05H90) 1 BULK FUEL TUBING (1/4",PER FT) 2 SPRING CLAMP (3/8") 1 FUEL PICKUP 2 FLG LK SCREW (M10-1.50 X 30MM) 3 FLG LOCKNUT (M10-1.50) 1 FILL NECK 1 GROMMET 1 SLOSH VALVE 27 BULK HOSE (5/16") LOW PERM 1 FLG SCREW (M10-1.50 X 25MM) 24 BULK HOSE (3/8") LOW PERM 2 BOLT-ON CLAMP (1/2") 1 FUEL CAP COVER BASE (2.25") 1 FUEL CAP COVER 8 WORM CLAMP (1/4" TO 5/8") 1 FUEL CAP (RATCHET 2.25") 4 BULK HOSE (3/16") LOW PERM 1 S/O COUPLER (03H-05H) 1 S/O COUPLER (05H-06H) 1 LANYARD CABLE (13.5") 2 POP RIVET (3/16" X .664") 9 BULK EDGE (5/32",SOLD PER 1") 1 WORM CLAMP (2.062" TO 2.750")

301-0402 116-325 156-269 118-096 110-563 194-505 106-383 106-387 301-1870 105-1557 362-1530 105-1518 106-724 105-1519 110-126 362-1531 362-1175 110-249 362-1479 105-1516 156-253 150-1381 110-239 110-348 115-686 110-134

DESCRIPTION

REMARKS

USE 9"

USE 1 @ 23" USE VARIOUS LENGTHS AND QUANTITIES USE 1 @ 10" MOUNT WITH EXISTING HARDWARE SEE FOOTNOTE 1 SEE FOOTNOTE 1 USE 1 @ 10" SEE FOOTNOTE 1 SEE FOOTNOTE 1 USE 1 @ 9" SEE FOOTNOTE 1

NOT SHOWN:

195-1536

1

FUEL FILTER

SERVICE PART

FOOTNOTES:

1. 190-1715 FUEL CAP COVER KIT, INCLUDES ITEMS 16, 17, 24, 25 & 27 (OPTIONAL, LOCKING )

NOTE:

06

ID0268941

28

FUEL SYSTEM

ENDS WITH S/N: CMWRT24XLB0000281 RT24

13

3 12

5 4

13 14

5

15 8

6 16

7

10 2

1 10 11

9

07

ID0254190

29

FUEL SYSTEM

ENDS WITH S/N: CMWRT24XLB0000281 RT24 REF PART NO. NUMBER

QTY

1 301-0402 2 116-325 3 156-269 4 118-096 5 110-563 6 194-505 7 301-0487 8 153-871 9 106-383 10 106-387 11 106-724 12 105-1518 13 110-249 14 105-1519 15 110-126 16 111-046

1 FUEL TANK 1 GROMMET (.362") 1 S/O COUPLER (04H-05H90) 1 BULK FUEL TUBING (1/4",PER FT) 2 SPRING CLAMP (3/8") 1 FUEL PICKUP 1 FILLER NECK 1 S/O COUPLER (06N-06H90, BRS) 2 FLG LK SCREW (M10-1.50 X 30MM) 3 FLG LOCKNUT (M10-1.50) 1 FLG SCREW (M10-1.50 X 25MM) 23 BULK HOSE (5/16" LOW PERM) 4 WORM CLAMP (1/4" TO 5/8") 29 BULK HOSE (3/8" LOW PERM) 2 BOLT-ON CLAMP (1/2") 1 LOCKING CAP (NON-VENTED)

DESCRIPTION

REMARKS

USE 9"

USE 1 @ 23" USE 1 @ 28.5" MOUNT WITH EXISTING HARDWARE

NOT SHOWN:

195-1536

1

FUEL FILTER

SERVICE PART

FOOTNOTES:

NOTE:

07

ID0254190

30

NOTES:

ID0134963

31

POWER TRAIN

ID0135064

32

HUB AND BRAKE RT12/16

15 17 14 12

9 1

4

2

11

3

13

10

8 3 7

19

2 18

04

16

8

6

5

1

4

9

ID0280826

33

HUB AND BRAKE RT12/16

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

2 HUB (MACHINED) 2 HYD MTR (GEROLER) 20.6 CID 4 CONNECTOR (06O-10S90) 10 LUG BOLT (7/16-NF X 2 1/4") 5 SPACER (.75 X .375 X .875) 1 BRAKE ROTOR 5 BOLT (3/8-NC X 1-5/8") 8 SCREW (M12-1.75 X 70 SOC 12.9 ZP) 10 LUG NUT (7/16-NF) 1 SHLD BLT (1/2" X 5/8"", 3/8-NC) 1 BRAKE PIN 1 FLG LK SCREW (M8-1.25 X 25MM) 1 EXT. SPRING (.84 OD X .58 ID X 4.75 LG) 1 LOCKNUT (3/8-NC) 1 BRAKE HANDLE 8 WASHER (.531", HARDENED) 1 LOCKNUT (M8-1.25,PRV TRQ,10.9) 8 FLG LK NUT (M12-1.75) 5 LOCK WASHER (3/8")

300-4341 155-572 154-421 105-1192 301-5707 301-1290 105-1756 105-1703 105-054 107-360 300-8836 106-992 117-1018 105-047 300-8835 106-743 106-561 106-709 105-072

DESCRIPTION

REMARKS

SEE FOOTNOTE 2 USE SEAL REPAIR KIT 500-510.

SEE FOOTNOTE 2 SEE FOOTNOTE 1 SEE FOOTNOTE 1, USE LOCTITE 242 OR EQUIVALENT. TORQUE TO 65 FT-LBS

NOT SHOWN:

FOOTNOTES:

1. UNITS PRIOR TO S/N: RT12XCD00001810 & RT16XHD0000440 MUST REPLACE ALL 5 COMPONENTS AT ONE TIME. IF REPLACING ORIGINAL INDIVIDUAL PARTS, NOT ALL AT ONCE, USE OLDER COMPONENTS 300-5985 AND 105-286. DO NOT MIX AND MATCH NEWER STYLE WITH OLDER STYLE PARTS. 2. REF#'S 1 & 4 ARE INCLUDED IN 650-1103 HUB ASSEMBLY.

NOTE:

04

ID0280826

34

HUB AND BRAKE

ENDS WITH S/N: CMWRT24XCA0000025 RT24

1

2

3

4

14

15

17

12 11 13

10

3

16

18

8 7 19

2

6

5 1

03

4 9

ID0257126

35

HUB AND BRAKE

ENDS WITH S/N: CMWRT24XCA0000025 RT24 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

2 HUB (MACHINED) 2 HYD MTR (GEROLER) 20.6 CID 4 CONNECTOR (06O-10S90) 10 LUG BOLT (7/16-NF X 2 1/4") 5 SPACER (.75 X .375 X 1.00) 1 BRAKE ROTOR 5 BOLT (3/8-NC X 1-3/4") 8 SCREW (M12-1.75 X 65MM) 10 LUG NUT (7/16-NF) 1 SHLD BLT (1/2" X 5/8"", 3/8-NC) 1 BRAKE PIN 1 FLG LK SCREW (M8-1.25 X 25MM) 1 EXT. SPRING (.84 OD X .58 ID X 4.75 LG) 1 LOCKNUT (3/8-NC) 1 BRAKE HANDLE 8 WASHER (.531", HARDENED) 1 LOCKNUT (M8-1.25,PRV TRQ,10.9) 8 FLG LK NUT (M12-1.75) 1 LOCK WASHER (3/8")

300-4341 155-572 154-421 105-1192 300-5985 301-1290 105-286 107-507 105-054 107-360 300-8836 106-992 117-1018 105-047 300-8835 106-743 106-561 106-709 105-072

DESCRIPTION

REMARKS

USE SEAL REPAIR KIT 500-510

TORQUE TO 65 Ft. Lbs.

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0257126

36

HUB AND BRAKE

BEGINS WITH S/N: CMWRT24XTA0000026 (RT24) RT20/24

1 2

3 14 18

4

17 19 10 16

15

7 13 5

12 2

11 8

6

4 1

04

3

9

ID0257580

37

HUB AND BRAKE

BEGINS WITH S/N: CMWRT24XTA0000026 (RT24) RT20/24 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

2 HUB (MACHINED) 2 HYDRAULIC MOTOR 24.1CID (GEROLER DISC ) 4 CONNECTOR (06O-10S90) 10 LUG BOLT (7/16-NF X 2 1/4") 5 SPACER (.75 X .375 X .875) 1 BRAKE ROTOR 5 BOLT (3/8-NC X 1-5/8") 8 SCREW (M12-1.75 X 70 SOC 12.9 ZP) 10 LUG NUT (7/16-NF) 1 BRAKE PIN 8 WASHER (.531", HARDENED) 8 FLG LK NUT (M12-1.75) 5 LOCK WASHER (3/8") 1 BRAKE HANDLE 1 EXT. SPRING (.84 OD X .58 ID X 4.75 LG) 1 SHLD BLT (1/2" X 5/8"", 3/8-NC) 1 LOCKNUT (3/8-NC) 1 LOCKNUT (M8-1.25,PRV TRQ,10.9) 1 FLG LK SCREW (M8-1.25 X 25MM)

300-4341 150-3197 154-421 105-1192 301-5707 301-1290 105-1756 105-1703 105-054 300-8836 106-743 106-709 105-072 300-8835 117-1018 107-360 105-047 106-561 106-992

DESCRIPTION

REMARKS

SEE FOOTNOTE 3 SEE FOOTNOTE 1 SEE FOOTNOTE 3 SEE FOOTNOTE 2 SEE FOOTNOTE 2, USE LOCTITE 242 OR EQUIVALENT. TORQUE TO 65 Ft. Lbs.

NOT SHOWN:

FOOTNOTES:

1. USE SEAL REPAIR KIT 500-1984 2. UNITS PRIOR TO S/N: RT20XLD0000144 & RT24XID0000511 MUST REPLACE ALL 5 COMPONENTS AT ONE TIME. IF REPLACING ORIGINAL INDIVIDUAL PARTS, NOT ALL AT ONCE, USE OLDER COMPONENTS 300-5985 AND 105-S86. DO NOT MIX AND MATCH NEWER STYLE WITH OLDER STYLE PARTS. 3. REF#'S 1 & 4 ARE INCLUDED IN 650-1103 HUB ASSEMBLY.

NOTE:

04

ID0257580

38

TIRE AND WHEEL

8

10

9 7

11

10

12

2 1 5 6

4

3 03

ID0228582

39

TIRE AND WHEEL REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12

1 TIRE (18 X 9.5 X 8 B/L, 4PLY TL) 1 WHEEL (8.00 X 6.937, W.5) 1 TIRE (18 X 8.50-8, B4TL, NHS) 1 WHEEL (8 X 5.375 WD, W15) 1 VALVE STEM (.453", SNAP-IN) 1 VALVE CAP (.305"-32) 10 LUG NUT (7/16-NF) 1 TIRE & WHEEL (RIGHT) 1 TIRE & WHEEL (LEFT) 2 TIRE & WHEEL (18 X 8.5 X 8, TURF TAMER) 1 POLYURETHANE FILL 18 X 9.5-8 BL RIGHT 1 POLYURETHANE FILL 18 X 9.5-8 BL LEFT

205-477 205-476 205-144 205-227 205-164 205-165 105-054 205-479 205-480 205-861 205-1156 205-1157

DESCRIPTION

REMARKS

REQUIRES 5 PER HUB, SEE FOOTNOTE 2 INCLUDES REF #'S 1,2,5 & 6 INCLUDES REF #'S 1,2,5 & 6 INCLUDES REF #'S 3-6 SEE DEALER FOR REQUIRED USE, SEE FOOTNOTE 1 SEE DEALER FOR REQUIRED USE, SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. THERE ARE NO SERVICE PARTS AVAILABLE FOR URETHANE FILLED TIRE ASSEMBLIES. THEY MUST BE PURCHASED AS DIRECTIONAL ASSEMBLIES ONLY. 2. TORQUE TO 65 FT-LBS

NOTE:

03

ID0228582

40

TRAIL WHEEL

5

2

4 3

04

1

ID0226631

41

TRAIL WHEEL REF PART NO. NUMBER

1 2 3 4 5

205-1128 115-003 105-071 105-065 184-975

QTY

1 1 1 1 1

DESCRIPTION

SOILD TIRE 13 X 5.0-6 ZERK (1/4-NF, STR) WASHER (1/2") LOCKNUT (1/2-NC) AXLE PIN

REMARKS

INCLUDES ZERK AND BEARINGS, SEE NOT SHOWN FOR SERVICE PARTS.

NOT SHOWN:

125-1100 2 BEARING, DOUBLE GROOVE SEAL (3/4 X 1-3/4)

FOOTNOTES:

NOTE:

04

ID0226631

42

CHAIN DRIVE AND AUGER RT10/12/24 EARLY STYLE PIVOT

15

13

12

10

1

5

9 7

8 11

4 6 3

2

14 EARLIER STYLE SEE FOOTNOTE 2

07

ID0223617

43

CHAIN DRIVE AND AUGER RT10/12/24 EARLY STYLE PIVOT REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

301-1656 107-167 105-073 300-9124 300-0081 301-1657 300-8782 105-1427 106-743 106-685 300-9322 105-518 150-2195 301-0413 150-1336

QTY

1 6 6 6 1 2 1 4 8 4 1 1 1 1 1

DESCRIPTION

DRIVE HUB BOLT (7/16-NC X 2.5", GD 8) LOCK WASHER (7/16") BUSHING 12T SPROCKET MACHINED RETAINER PLATE AUGER SCREW (M12-1.75 X 85MM 10.9) WASHER (.531", HARDENED) LOCKNUT(M12-1.75,PRV TRQ,10.9) BACKUP RING COTTER PIN (.125 X 1.500) HYDRAULIC MOTOR 8.0 CU IN AUGER, LARGE HYDRAULIC MOTOR

REMARKS

USE LOCTITE 242 OR EQUIVALENT, TORQUE TO 75 FT-LBS

STANDARD AUGER. TORQUE TO 75 FT-LBS

NO LONGER USED SEE FOOTNOTE 1 AND 4.

OPTIONAL AUGER: USE WITH LARGE BOOM/CHAIN ON RT20 AND RT24.

11.89 CU IN, USED ON RT20 AND RT24. SEE FOOTNOTE 3 AND 4.

NOT SHOWN:

142-109

1 HEADSHAFT SPROCKET HALF

INCLUDES TWO 10T SPROCKET HALVES.

FOOTNOTES:

1. SEAL REPAIR KIT 500-1428 2. SEE PIVOT PARTS PAGE IDO254146 FOR COMPONENTS. 3. USE SEAL KIT 500-1428; SHAFT & BEARING KIT 500-2399 4. USE 105-1646 IN PLACE OF NUT ON MOTOR. TORQUE TO 225 FT-LB. USE LOCTITE 277 OR EQUIVALENT.

NOTE:

07

ID0223617

44

NOTES:

ID0134963

45

FRAME COMPONENTS

ID0135068

46

CONSOLE TOWER

22 23

1 6

21 9 12 14

2 3 9

19 4

15

20 16

17 12

8 11 10 18

5 12

7

9

13

01

ID0280837

47

CONSOLE TOWER REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

1 CONSOLE 1 TOWER MOUNT 1 TOWER SIDE 1 BACK PLATE 1 MANUAL MOUNT 1 FRONT CONSOLE COVER 2 CLIP NUT M8-1.25, LONG, WIDE 8 FLG LOCKNUT (M10-1.50) 12 FLG LK SCREW (M8-1.25 X 25MM) 2 FLG LK SCREW (M8-1.25 X 16MM) 10 FLG LOCKNUT (M8-1.25) 6 FLG SCREW (M10-1.50 X 25MM) 2 WORM CLAMP (3-1/4" TO 4-1/8"") 3 FLG LK SCREW (M10-1.50 X 30MM) 1 SIGHT GLASS (2") 1 REAR PANEL CONSOLE 1 GROMMET (1 1/2) .188 THK. 1 MANUAL COMPARTMENT 1 COVER 1 PLUG (3/4") 1 CONTROL MOUNT STD. 2 FLG SCREW (M6-1.00 X 16MM) 2 LOCKNUT (M6-1.00,PRV TRQ,NLK)

300-8808 300-8829 300-8828 300-8833 300-8899 300-8825 107-687 106-387 106-381 106-380 106-386 106-724 110-367 106-383 116-218 300-8839 105-1392 362-1227 362-823 159-958 301-0432 106-712 106-237

DESCRIPTION

REMARKS

USE 217-072 SWITCH ON RT12 USED ON RT20/24 ONLY USED ON RT20/24 ONLY USED ON RT20/24 ONLY

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0280837

48

PIVOT

RT12/16/20/24 BEGINS WITH S/N'S: CMWRT12XHF0002195 CMWRT16XCE0001138, CMWRT20XTE0000409, CMWRT24XKE0001220

35 18 1

16

26

17

27 28

2

19

29

3 25

20

22 21

5

23 24

6 30 7 8

31

9 10

32 33 34

11

12 13 14 15

36

EARLIER STYLE SEE FOOTNOTE 3

09

37

ID0274202

49

PIVOT

RT12/16/20/24 BEGINS WITH S/N'S: CMWRT12XHF0002195 CMWRT16XCE0001138, CMWRT20XTE0000409, CMWRT24XKE0001220 REF PART NO. NUMBER

QTY

1 150-1336 2 150-2195 3 106-477 5 115-157 6 362-1573 7 140-1301 8 125-040 9 105-1646 10 157-583 11 301-1980 12 301-1978 13 105-1567 14 105-073 15 107-167 16 107-206 17 106-743 18 116-468 19 301-1977 20 157-309 21 301-1979 22 115-499 23 125-412 24 301-5129 25 106-561 26 300-7483 27 106-327 28 105-117 29 106-389 30 115-001 31 105-1599 32 300-9322 33 300-9124 34 301-1657 35 115-003 36 300-8782 37 301-0413

1 HYDRAULIC MOTOR 1 HYDRAULIC MOTOR 8.0 CU IN 4 SCREW (M12-1.75 X 45MM, 10.9) 1 PLUG (02N, SOC) 1 THRUST RING (COMPOSITE) 1 PIVOT BUSHING (BRONZE) 1 BALL BEARING (1.968") 1 NUT (1-20 NEF, GD8) 1 INTERNAL SEAL 1 PIVOT ASM 1 THRUST RING 1 RETAINING RING (4.750") 6 LOCK WASHER (7/16") 6 BOLT (7/16-NC X 2.5", GD 8) 4 HHCS M12-1.75 X 35MM,10.9 ZP 8 WASHER (.531", HARDENED) 1 LUBE HOSE (02N-24") 1 PIVOT HUB 1 V-RING SEAL 1 DRIVE HUB 1 KLIP RING (1.000") 1 BRONZE BUSHING 1 SPOILS SKIRT 5 LOCKNUT (M8-1.25,PRV TRQ,10.9) 1 ROCK SHIELD 5 SCREW (M8-1.25 X 30MM) 5 WASHER (5/16") 5 WASHER (M8) 2 ZERK (02N) 1 DIRT COVER 1 BACKUP RING 6 BUSHING 2 RETAINER PLATE 1 ZERK (1/4-NF, STR) 1 AUGER 1 AUGER, LARGE

DESCRIPTION

REMARKS

USED ON RT20 AND RT24. SEE FOOTNOTE 2. SEE FOOTNOTE 4 USED ON RT10/12/16. SEE FOOTNOTE 2.

INSTALL BEARING ON DRIVE HUB BEFORE INSTALLING INTO PIVOT HUB USE IN PLACE OF ONE ON MOTOR. SEE FOOTNOTE 2 SEE FOOTNOTE 1 & 3

LIP FACES TOWARDS PIVOT.

STANDARD AUGER. OPTIONAL AUGER: USE WITH LARGE BOOM/CHAIN ON RT20 AND RT24.

NOT SHOWN:

FOOTNOTES:

1. FOR BACKFILL BLADE USE 190-1787 KIT. 2. USE 105-1646 IN PLACE OF NUT ON MOTOR. TORQUE TO 225 FT-LB. USE LOCTITE 277 OR EQUIVALENT. TIGHTEN BEFORE TIGHTENING 106-477 & 107-206 SCREWS. 3. SEE PIVOT PARTS PAGE IDO254146 FOR COMPONENTS. 4. USE SEAL KIT 500-1428; SHAFT & BEARING KIT 500-2399

NOTE:

09

ID0274202

50

PIVOT

RT10/12/24 EARLIER STYLE

15

16

17 13 11 10 12

4 1 2 14

9 3 7 5

8

9 6

CURRENT PRODUCTION SEE FOOTNOTE 3

05

ID0254146

51

PIVOT

RT10/12/24 EARLIER STYLE REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

190-1654 301-0397 362-1525 300-3386 125-412 107-594 105-1427 107-507 105-839 106-743 106-387 106-709 106-685 115-499 301-1807 115-003 116-468 116-258

QTY

DESCRIPTION

DUAL REMOTE GREASE KIT 1 PIVOT ASSEMBLY 1 WEAR STRIP 1 BOOM PIVOT RETAINER 1 BRONZE BUSHING 2 WASHER (.406", HARDENED) 4 SCREW (M12-1.75 X 85MM 10.9) 2 SCREW (M12-1.75 X 65MM) 2 SCREW (M10-1.50 X 55MM) 12 WASHER (.531", HARDENED) 2 FLG LOCKNUT (M10-1.50) 2 FLG LK NUT (M12-1.75) 4 LOCKNUT(M12-1.75,PRV TRQ,10.9) 1 KLIP RING (1.000") 1 BOOM BEARING PLATE 2 ZERK (1/4-NF, STR) 1 LUBE HOSE (02N-24") 1 LUBE HOSE (02N-18")

REMARKS

INCLUDES REF NO.'S 2 & 14-17. SEE FOOTNOTE 2 FOR S/N BREAK. OBSOLETE, SEE FOOTNOTE 3

USE LOCTITE 277 OR EQUIVALENT. DO NOT OVERTIGHTEN. USE LOCTITE 277 OR EQUIVALENT. DO NOT OVERTIGHTEN. SEE FN 1.

NOT SHOWN:

105-283

LOCKNUT (02NF)

SERVICE PART FOR LUBE HOSE

FOOTNOTES:

1. EARLY MODELS MAY BENEFIT FROM 115-249 STREET ELBOW. INSTALL ROTATED APX. 30 DEG UPWARD TOWARDS THE TOWER. 2. BEGINS WITH S/N: CMWRT10XCB0000303; CMWRT12XEB0000670; CMWRT24XLB0000250 3. SEE PIVOT PARTS PAGE IDO274202 FOR CURRENT STYLE COMPONENTS.

NOTE:

05

ID0254146

52

OUTBOARD BEARING

8

1

9 7

3

6

4 10

5 2

02

ID0223620

53

OUTBOARD BEARING REF PART NO. NUMBER

QTY

1 300-8763 2 125-053 3 110-396 4 110-395 5 105-249 6 115-003 7 105-834 8 106-387 9 106-383 10 125-708

1 1 1 1 3 1 3 2 2 1

DESCRIPTION

REMARKS

AUGER SUPPORT BALL BEARING (1.250") FLANGETTE (3-BOLT, L/ZERK) FLANGETTE (3-BOLT, W/ZERK) CARRIAGE BOLT(3/8-NC X 1-1/4") ZERK (1/4-NF, STR) FLG LOCKNUT (3/8-NC) FLG LOCKNUT (M10-1.50) FLG LK SCREW (M10-1.50 X 30MM) LOCK COLLAR (1.250")

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0223620

54

NOTES:

ID0134963

55

CONTROL COMPONENTS

ID0135065

56

CONTROLS

1 15 3

21 24

14

2

20

20 7 11

10

4 9

13

8

16 19 12

6

9

7

5 11

22 26 18

25

23

01

17

ID0288091

57

CONTROLS REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

300-8808 300-8799 300-8800 300-8790 300-8830 125-403 125-548 105-834 106-070 117-186 105-835 300-8927 300-8941 105-1400 105-1401 105-047 106-386 106-991 105-1412 107-095 106-989 105-115 107-110 105-117 300-8832 105-1380

QTY

1 1 1 2 1 4 2 4 2 1 4 1 1 1 1 2 4 4 2 2 1 2 2 1 2 2

DESCRIPTION

CONSOLE AUX HANDLE ATT. HANDLE GROUND DRIVE LEVER PIVOT PIN BRONZE BUSHING (.625") FLANGE BEARING FLG LOCKNUT (3/8-NC) SHLD BLT (1/2" X 3/8", 3/8-NC) EXTENSION SPRING (3.625") CARRIAGE BOLT (3/8-NC X 3/4") CONTROL ROD LINKAGE CONTROL ROD LINKAGE FOAM GRIP (BLACK, 7", 3/8 ID) FOAM GRIP (BLACK, 3", 3/8 ID) LOCKNUT (3/8-NC) FLG LOCKNUT (M8-1.25) FLG LK SCREW (M8-1.25 X 20MM) WASHER (NYLON, .515) FLG SCREW (M8-1.25 X 16MM) FLG LK SCREW (M8-1.25 X 35MM) JAM NUT (5/16-NF) LOCKNUT (5/16-NF, NYL INSERT) WASHER (5/16") PUMP SWASH BALL JOINT 5/16 MALE W/ STUD (MPM-5S)

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. FOR RT12 HONDA USE P/N 301-1279, HONDA PUMP SWASH

NOTE:

01

ID0288091

58

NOTES:

ID0134963

59

HYDRAULICS

ID0135071

60

FILTER HYDRAULICS RT12/16/20/24

2

19

1 4

3

5

18 15

19

5 19

34

6

8 7

22

21

5

23

11

10

5

17

9

24 5 21

20 13

16

15

26 27

14

12

18

25

28 29 31

5 32

02

30

33

ID0280780

61

FILTER HYDRAULICS RT12/16/20/24 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

1 HYD VALVE SD5/2S, 2.75MM FLOW CONTROL 1 HYDRAULIC 2 SPOOL W/LOCKOUT 1 CONNECTOR (08S-08O90) 1 S/O COUPLER (O8S-12H90) 7 WORM CLAMP (1" TO 1-3/4") 1 ABRASION SLEEVE (1.25" X 25") 1 FILTER MOUNT 2 FLG LK BOLT (1/4-NC X 1/2") 1 FLG LK SCREW (M8-1.25 X 25MM) 1 FLG LOCKNUT (M8-1.25) 1 QDC ADAPTER (02-08OFX) 1 S/O COUPLER (12S-12H) 1 FILTER HEAD (12SF-12SF) 1 FILTER ELEMENT (1-UNF) 1 HOSE (08OFX45S-28"-3000) 1 UNION RUN TEE (08OFX-08O-08O) 1 CONNECTOR (08O-10S45) 20 BULK HOSE (3/4", SOLD PER FT) 1 OIL COOLER W/ FAN 1 S/O COUPLER (12S-12H45) 30 BULK HOSE (3/4", SOLD PER FT) 1 ABRASION SLEEVE (1.59" X 26"") 1 S/O COUPLER (12S-16H90) 1 BREATHER -12SAE 4 WORM CLAMP (1/4" TO 5/8") 2 ELBOW (-06S X -06H90) 5 BULK HOSE (3/8", SOLD PER FT) 10 BULK HOSE (3/8", SOLD PER FT) 1 BULK EDGE (1/4", SOLD PER 1") 1 MAGNET 28 BULK HOSE (1", SOLD PER FT) 1 TANK STRAINER (100MESH -16HB) 1 ZERK (02N) 10 BULK HOSE (3/4", SOLD PER FT)

150-3555 150-2335 154-235 156-960 111-011 117-337 300-8831 105-836 106-381 106-386 159-158 150-2028 159-386 155-910 515-178 154-266 154-264 116-636 195-1051 155-196 116-636 117-224 155-146 150-2337 110-249 159-916 116-881 116-881 115-704 110-130 116-460 150-2925 115-001 116-636

DESCRIPTION

REMARKS

USED ON RT12/16. SUPERSEDES HYD VALVE 150-3240.

USED ON RT20/24

USE 20" ONE INCLUDED WITH OIL COOLER (195-1051) USE 30"

USE 5" USE 10" USE 4" USE 28" INSTALLED INSIDE HYD TANK USE 10"

NOT SHOWN:

255-1011

POWER UP "HYDRA MAX"

SEE FOOTNOTE 1

FOOTNOTES:

1- USE (1) 16oz BOTTLE ALONG WITH 8 GAL. DEO PER RECOMMENDED OIL CHANGE.

NOTE:

1. SEE O-RING CHART 800-301, IN BACK OF BOOK, FOR O-RING REPLACEMENT

02

ID0280780

62

OIL COOLER

1 5 2

6

6

7

6

3

7

7 6 8

4

7 7 8

7 8

04

ID0223859

63

OIL COOLER REF PART NO. NUMBER

QTY

1 300-8925 2 195-1051 3 300-8923 4 300-8924 5 106-162 6 106-386 7 106-724 8 106-387

1 COOLER MOUNT 1 OIL COOLER W/ FAN 1 COOLER SUPPORT 1 COOLER SUPPORT 4 FLG SCREW (M8-1.25 X 20MM, GD8) 3 FLG LOCKNUT (M8-1.25) 10 FLG SCREW (M10-1.50 X 25MM) 10 FLG LOCKNUT (M10-1.50)

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0223859

64

CHAIN MOTOR HYDRAULICS

7

9

9 8

3

4

8 3 5 6

2

1

08

ID0223946

65

CHAIN MOTOR HYDRAULICS REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

150-1336 150-2195 515-303 117-657 154-322 154-279 154-256 515-303 154-246

QTY

1 1 1 1 1 1 1 1 2

DESCRIPTION

HYDRAULIC MOTOR HYDRAULIC MOTOR 8.0 CU IN HOSE (08OFX90-58"-3000) ABRASION SLEEVE (1.59" X 54") CONNECTOR (08O-10S90) CONNECTOR (08O-10S) UNION (08O-08OFX90) HOSE (08OFX90-58"-3000) CONNECTOR (06S-08O)

REMARKS

USED ON RT20 AND RT24, SEE FOOTNOTE 1 AND 2.

USED ON RT10/12/16 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. USE SEAL KIT 500-1428; SHAFT & BEARING KIT 500-2399 2. USE 105-1646 IN PLACE OF NUT ON MOTOR. TORQUE TO 225 FT-LB. USE LOCTITE 277 OR EQUIVALENT.

NOTE:

1. SEE O-RING CHART 800-301, IN BACK OF BOOK, FOR O-RING REPLACEMENT

08

ID0223946

66

WHEEL MOTOR HYDRAULICS

4 5 6 6

5

2 3

5 5 6

6

1

01

ID0226227

67

WHEEL MOTOR HYDRAULICS REF PART NO. NUMBER

1 2 3 4 5 6

154-421 117-224 117-679 154-221 155-485 515-221

QTY

4 1 1 4 2 2

DESCRIPTION

REMARKS

CONNECTOR (06O-10S90) ABRASION SLEEVE (1.59" X 26"") ABRASION SLEEVE (1.59" X 32") CONNECTOR (06S-06O) HOSE (06OFX90L-31"-3000) HOSE (06OFX90S-28"-3000)

NOT SHOWN:

FOOTNOTES:

NOTE:

1. SEE O-RING CHART 800-301, IN BACK OF BOOK, FOR O-RING REPLACEMENT

01

ID0226227

68

LIFT HYDRAULICS RT12/16/20/24

1

17 20

16

20

15 14

2

19 23 3 23 5 6

21

22

7

12

4

11

18

9

8

13 10

04

ID0285519

69

LIFT HYDRAULICS RT12/16/20/24 REF PART NO. NUMBER

QTY

1 150-3555 2 150-2335 3 154-387 4 515-729 5 154-653 6 115-737 7 154-252 8 154-278 9 151-031 10 125-412 11 125-800 12 300-8837 13 106-724 14 106-570 15 106-395 16 105-264 17 108-220 18 107-661 19 154-226 20 106-386 21 362-1752 22 362-1751 23 106-330

1 HYD VALVE SD5/2S, 2.75MM FLOW CONTROL 1 HYDRAULIC 2 SPOOL W/LOCKOUT 1 CONNECTOR (04O-06S90, ORF) 1 HOSE (04OFX90-52"-3000) 1 HOSE (04OFX-40"-3000) 1 ABRASION SLEEVE (1.59" X 40") 1 CONNECTOR (04S-04O90) 1 CONNECTOR (04S-04O) 1 CYL (2.0 X 1.0 X 8.0) 1 BRONZE BUSHING 1 COMPOSITION BUSHING (1") 1 TAB PIN (1 X 6.72) 1 FLG SCREW (M10-1.50 X 25MM) 1 SCREW (M8-1.25 X 60MM) 3 WASHER (M8) 3 WASHER (3/8") 1 SLAB BASE WELD NUT (M8-1.25) 1 FLG LKNUT (M10-1.50, PRV TRQ) 1 CONNECTOR (04O-06S90) 2 FLG LOCKNUT (M8-1.25) 1 SPACER - SHORT 1 SPACER - LONG 2 SCREW (M8-1.25 X 70MM)

DESCRIPTION

REMARKS

USED ON RT12/16 USED ON RT20/24, SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. USE SEAL REPAIR KIT FVLIEXP61002-U

NOTE:

1. SEE O-RING CHART 300-301, IN BACK OF BOOK, FOR O-RING REPLACEMENT.

04

ID0285519

70

HYDRAULIC CYLINDERS (2.0" X 1.0")

1

6 11

13

12 5

7

4 8

9 3 10 2

04

ID0015823

71

HYDRAULIC CYLINDERS (2.0" X 1.0") REF PART NO. NUMBER

QTY

DESCRIPTION

1 2

151-094 152-029 153-007 149-667 149-761 149-728 151-027 150-282 150-414 151-038 150-290 150-421 151-039 150-291 150-422 151-044 150-294 150-424 151-031 150-285 150-417 151-076 152-017 150-444 149-668 150-286 149-729

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

CYL (2.0 X 1.0 X 2.0) CYLINDER BARREL (2.0 X 2.0) CYLINDER ROD (1.00 X 2.0) CYL (2.0 X 1.0 X 2.5) CYLINDER BARREL (2.0 X 2.5) CYLINDER ROD (1.00 X 2.5) CYL (2.0 X 1.0 X 3.0) CYLINDER BARREL (2.0 X 3.0) CYLINDER ROD (1.00 X 3.0) CYL (2.0 X 1.0 X 4.0) CYLINDER BARREL (2.0 X 4.0) CYLINDER ROD (1.00 X 4.0) CYL (2.0 X 1.0 X 5.0) CYLINDER BARREL (2.0 X 5.0) CYLINDER ROD (1.00 X 5.0) CYL (2.0 X 1.0 X 6.0) CYLINDER BARREL (2.0 X 6.0) CYLINDER ROD (1.00 X 6.0) CYL (2.0 X 1.0 X 8.0) CYLINDER BARREL (2.0 X 8.0) CYLINDER ROD (1.00 X 8.0) CYL (2.0 X 1.0 X 10.0) CYLINDER BARREL (2.0 X 10.0) CYLINDER ROD (1.00 X 10.0) CYL (2.0 X 1.0 X 12.0) CYLINDER BARREL (2.0 X 12.0) CYLINDER ROD (1.00 X 12.0)

3 4 5 6 7 8 9 10 11 12 13

150-772 150-778 150-775 106-096 157-022 155-732 157-540 157-537 125-774 157-534 157-018

1 1 1 1 1 1 1 1 1 1 1

CYLINDER HEAD (2.0 X 1.00) LOCK RING (2.0) CYLINDER PISTON (2.0 X 1.00) FLG BOLT (1/2-NC X 1-3/4",GD8) O-RING (224 D90) BACKUP RING (224 D90) U-SEAL (1.000") WIPER SEAL (1.000") WEAR RING BACKUP RING (131 D90) O-RING (131 D90)

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

REMARKS

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

.

SEE FOOTNOTE 3

NOT SHOWN:

259-100 259-235 259-239 259-241 259-188

U-SEAL INSTALLER (1" - 1.499") 1.00 ROD WIPER TOOL WIPER/SEAL INSTALLER (2") PISTON INSTALLER (2") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. REF. #1 & #2 ARE SPECIFIC TO EACH CYLINDER, REF. #3 THRU #13 ARE COMMON FOR ALL THE ABOVE LISTED CYLINDERS 2. SEAL REPAIR KIT P/N: 190-165 3. APPLY LOCTITE 277 OR EQUIVALENT, TORQUE TO 90-100 FT-LBS

NOTE:

04

ID0015823

72

HYDRAULIC MOTOR

TAPERED KEYED SHAFT 1-1/4"

1

3

4 2

1

5

1

6

09

ID0051772

73

HYDRAULIC MOTOR

TAPERED KEYED SHAFT 1-1/4" REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

QTY

150-6055 155-580 153-280 500-347 1 155-771 3 155-760 1 165-915 1 105-418 1 105-501 1

DESCRIPTION

REMARKS

HYDRAULIC MOTOR HYDRAULIC MOTOR HYDRAULIC MOTOR SEAL REPAIR KIT O-RING (011 D70) O-RING (904 D90) KEY (5/16" X 1") LOCKNUT (1-20 NEF) COTTER PIN (1/8" X 2")

INCL REF NO.'S 2 THRU 6, SEE FOOTNOTES 1, 4 & 5 INCL REF NO.'S 1 THRU 5, SEE FOOTNOTES 2 AND 3 INCL REF NO.'S 1 THRU 5, SEE FOOTNOTE 2 INCL REF NO.'S 2 AND 3, SEE FOOTNOTE 4

NOT SHOWN:

FOOTNOTES:

1. USED ON ROTO WITCH II BORING UNITS. 2. USED ON ROTO WITCH 111 AND 1V BORING UNITS. 3. SHAFT AND BEARING KIT- 500-1469 4. FOR OLD STYLE HYD MOTOR 155-579, USE SEAL KIT 500-347 FOR MOTOR VERSION 002, 003, 004 & 005.

SEAL KIT 500-658 IS TO BE USED WITH VERSION 006 MOTORS. 5. HYD. MOTOR 150-6055 BEGINS WITH S/N: CMW_______, USE SEAL KIT 500-3733 NOTE:

09

ID0051772

74

GREASE CYLINDER

1 2

4 3

02

ID0113060

75

GREASE CYLINDER REF PART NO. NUMBER

1 2 3 4

151-221 157-059 157-762 157-759 155-723

QTY

1 1 1 1

DESCRIPTION

GREASE CYLINDER BACKUP RING (214 D90) ROD ASS'Y BARREL ASS'Y O-RING (214 D90)

REMARKS

INCL. REF NO.'S 1 THRU 4

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0113060

76

HYDRAULIC SCHEMATIC

6 7 5 -BB-BB-AAA

B

8

OPTIONAL BORING ATTACHMENT -AA-

A

B

4

9

10

T P

M 15 PSI

220 Bar

FILTER

T1

COOLER

1

160 Bar

160 Bar

0 CW

2

160 Bar 160 Bar

3

3

GROUND DRIVE LEFT

GROUND DRIVE RIGHT

3 PSI

12

13 11

01

ID0280904

77

HYDRAULIC SCHEMATIC Ref. # Component 0 1

2 3 4 5 6 7 8 9 10 11 12 13

Notes

Engine

3600 RPM Each Loop Displacement: 0.366 in3/rev (6 cc) Tandem Hydrostat Ground Drive Single Charge Pump Displacement: 0.19 in3/rev (3.1 cc) Pump Fwd/Rev Relief: 2320 psi (160 bar) See Note 1 Loop Bypass Valve - 2 Turns Max Attachment Pump RT12/16 Displacement: 0.50 in3/rev (8.2 cc) Attachment Pump RT20/24 Displacement: 0.84 in3/rev (13.8 cc) Ground Drive Motor 20.6 in3/rev (337 cc) RT12/16; 24.1 in3/rev (395 cc) RT20/24 Attachment Valve Relief Valve, Test Port, T1: 3200psi (220 bar) See Note 2 Lift Cylinder 2" x 1" x 8" Chain & Auger Motor RT12/16 8.0 in3/rev (131 cc) Chain & Auger Motor RT20/24 11.9in³/rev (195cc) Boring Attachment Motor 18.71 in3/rev (306.6 cc) Selector Valve Optional with Boring Attachment Hydraulic Filter w/ Bypass Beta 38 = 200; Beta14= 2, Filter w/ 15 psi (1.0 bar) Bypass Oil Cooler w/ Fan Hydraulic Reservoir Reservoir Capacity: 8 gal (30.3L) Breather w/ Bypass 3 psi Bypass Suction Strainer 100 Mesh

Notes: Bring hydraulic temperature up to 130°F before chec king pressures.

Do not run attachment or ground drive functions over relief for more than 7 seconds at a time.

Ground Drive Pressures: Note 1 At very low engine speed, position unit up against a wall or other firm, solid object that is secured from movement. Increase engine speed to 3600rpm and engage ground drive control lever forward.

Note 2

01

Attachment Pressure: Actuate attachment cylinder to deadhead position forcing pump over relief.

ID0280904

78

NOTES:

ID0134963

79

ELECTRICAL

ID0135070

80

BATTERY 4 5 2

3

11 12 10 10 13

11 14

7

6

7

8 8 8

7 1

01

9

ID0280844

81

BATTERY REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

301-0438 300-4262 300-4334 195-339 105-095 300-8842 106-387 106-724 106-380 106-161 106-385 215-1199 215-1521 215-256

QTY

1 1 2 2 2 1 3 3 1 2 2 1 1 1

DESCRIPTION

BATTERY MOUNT BATTERY HOLD DOWN J-HOOK (PLATED) WING NUT (1/4-NC) WASHER (1/4") BATTERY MOUNT FLG LOCKNUT (M10-1.50) FLG SCREW (M10-1.50 X 25MM) FLG LK SCREW (M8-1.25 X 16MM) FLG SCREW (M6-1.00 X 20MM) FLG LOCKNUT (M6-1.00) NEG BAT CABLE (6 GA X 22", BLK) POSITIVE BATT. CABLE (6 GA. X 30", RED) BATTERY (12V, 200 AMP)

REMARKS

USED ON RT20/24

USED ON RT12/16

RT12/16. SEE "NOT SHOWN" FOR RT20/24

NOT SHOWN:

213-270

BATTERY (12V, 340 CCA), RT20/24

FOOTNOTES:

NOTE:

01

ID0280844

82

TACH/HOUR METER RT12/16

4 5

2

1 3

03

ID0280868

83

TACH/HOUR METER RT12/16

REF PART NO. NUMBER

1 2 3 4 5

215-1863 107-859 107-820 215-2594 301-1379

QTY

1 2 2 1 1

DESCRIPTION

TACHOMETER/HOURMETER NUT, LOCK, #6-32, NYLON INSERT SCREW PAN 6-32 X 9/16 PHIL SST HOUR METER HOUR METER MOUNT

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. 190-1790 HOUR METER KIT, INCLUDES REF. NO.'S 1 THRU 3 -- RT16 2. 190-1603 HOUR METER KIT, INCLUDES REF. NO'S 4 AND 5 -- RT12

NOTE:

03

ID0280868

84

FAN HARNESS RT16

CAP FMS Pos COL

LBL

1

RED/WHT

2

RED

2

3

BLK

1

4

CP

-

FMS 4 3

1 2

15A

FAN- FUSE FAN- FUSE

GROUND B

A

GROUND

Pos COL

LBL

A

RED

2

B

RED/BLU 3

Pos COL LBL 1

BLK 1

FAN A B

ENGINE CONNECTION 1-1

ENGINE CONNECTION 1-1 Pos

COL

LBL

1

RED

2

FAN Pos COL

ENGINE CONNECTION 1

ENGINE CONNECTION 1 Pos

COL

LBL

1

RED

2

LBL

A

RED/BLU 3

B

BLK

1

1

FUSE HLDR GPS-POWER GPS-POWER Pos COL 1

03

RED/WHT

FUSE 2 2A

ID0228150

85

FAN HARNESS RT16

REF PART NO. NUMBER

QTY

DESCRIPTION

1

1

FAN HARNESS

215-1516

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0228150

86

ELECTRICAL DIAGRAM RT20/24 FAN HARNESS

1 TO FMS Pos COL TO COMBO Pos COL 1

LBL

WHT/YEL 16

LBL

1

RED/WHT 10

2

RED

2

3

BLK

1

4

CP

TO IGNITION/RECTIFIER HARNESS

TO FMS TO COMBO 1 2

4 3

Pos COL

LBL

1

BLK/YEL

5

2

BLK/RED

7

3

YEL

6

4

BLU

8

TO COMBOW SWITCH 1

TO IGNITION/RECTIFIER HARNESS

F

1

2

3

4

M COMB O CAP

TO COMBOW SWITCH 1 Pos

COL

LBL

1

WHT

15

-ATO FUEL CUTOFF SOLENIOD FUEL CUTOFF CAP

TO FUEL CUTOFF SOLENIOD Pos

COL

LBL

3

4

1

BLK/WHT

14

1

2

TO GROUND CONTROLLER

01

TO COMBO SWITCH/HOURMETER TO COMBO SWITCH/HOURMETER Pos COL

LBL

1

BLK/YEL

5

2

BLK/RED

7

TO GROUND CONTROLLER

3

YEL

6

Pos

COL

LBL

4

BLU

8

1

BLK

1

ID0252056

87

ELECTRICAL DIAGRAM RT20/24 FAN HARNESS

RELAY/FUSE HOLDER Pos

COL

LBL

A

RED

2

B

ORG

12

TO GROUND 1

C

BLK/YEL

5

Pos COL

LBL

D

ORG

12

1

1

E

BLK

1

F

ORG/GRN

13

G

RED/BLU

3

H

RED/WHT

10

CAP

BLK

TO GROUND 1

RELAY/FUSE HOLDER

TO REGULATOR/RECTIFIER HARNESS Pos

COL

LBL

1

WHT/YEL

16

ORG B

A

ORG C

D

15

TO REGULATOR/RECTIFIER HARNESS

2 H

G

F

D

C

B

A

E

F

G

H

E

TO FAN TO FAN Pos COL

B A

LBL

A

ORG/GRN 13

B

BLK

1

-A-

1 TO STARTER -1

F

TO STARTER -1 Pos CKT GA COL Type LBL Term 1

12

TO SOLENOID

16 WHTGXL 15 2105014

TO SOLENOID Pos CKT GA COL 1

11

Type LBL Term

16 BLK/WHTGXL 14 2155214

TO STARTER TO STARTER

FMS-POWER

Pos CKT GA COL Type LBL Term 1

20

16 RED GXL 2

FMS-POWER

2105014

Pos CKT GA COL

01

1

17

Type LBL Term

18 RED/BLUGXL 3

2105014

ID0252056

88

ELECTRICAL DIAGRAM RT20/24 FAN HARNESS REF PART NO. NUMBER

QTY

DESCRIPTION

1

1

FAN HARNESS

215-1603

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0252056

89

90

ELECTRICAL COMPONENTS RT20/24

7

6

5 4 3

1 8

02

7

2

ID0254254

91

ELECTRICAL COMPONENTS RT20/24

REF PART NO. NUMBER

1 2 3 4 5 6 7 8

215-1328 215-1603 217-710 106-205 110-449 106-161 105-284 106-237

QTY

1 1 1 1 1 2 4 2

DESCRIPTION

REMARKS

RECTIFIER ASSY. REGULATOR FAN HARNESS MICRO RELAY (SPDT) WASHER (.191") POP RIVET (3/16" X .690") FLG SCREW (M6-1.00 X 20MM) WASHER (3/16") LOCKNUT (M6-1.00,PRV TRQ,NLK)

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0254254

92

ELECTRICAL SCHEMATIC RT12

2

1

BT1 BATTERY J3 2

MAIN FUSE F1 3 30A FUEL CUT SOLENOID RECTIFIER

1

IGNITION SWITCH BAT IGN ST 7

S1

J1 DC 12V

B1

TO HONDA ECM (BATT SIGNAL)

5 J1

6 J1 RED/WHT

3

BATTERY SIGNAL FUSE J1 F2 3A 4A 4

ORG

ECM DC 12V RELAY K1 4 3 5 8 2 1

REGULATOR/RECTIFIER BATTERY CONNECTION

STARTER SOLENOID M

FUEL CUT SOLENOID COIL

STARTER MOTOR

J1 SW SIGNAL

9

HOURMETER M1 4 FAN RELAY K2 4

3 1

3

5 2

+ -

HYD COOLER FAN B2

M

10 1

YEL

J2 11

1 HI 1

LT GRN

S2

THROTTLE SWITCH

3 LO

GRN/ORG

2

02

J2 12 J2 13 ENGINE INPUT

ID0280981

93

ELECTRICAL SCHEMATIC RT12

Circuit Number 1 2 3 4 4A 5 6 7 8 9 10 11 12 13

02

Wire Color blk wht wht/org org/brn blk/yel blk/wht red/wht org blk/red brn org/wht yel lt grn grn/org

Function System Ground Battery Circuit Fused Battery Circuit Ignition Circuit Fused Battery Signal Circuit Start Circuit Ignition Switch to Fuel Cut Solenoid Rectifier Ignition Switch to Fuel Cut Solenoid Coil ECM DC 12V to ECM DC 12V Relay ECM DC 12V Relay to ECM sw Signal Fan relay to Hyd Cooler Fan and Hour Meter ECM to Throttle Control Switch Throttle Control Switch Up to ECM Throttle Control Switch Down to ECM

ID0280981

94

ELECTRICAL SCHEMATIC RT12

02

Ref. No. B1 B2 BT1 F1 F2 J1 J2 K1 K2 M1 S1 S2

195-1303 500-1156 215-256 211-295 211-289 n/a n/a 217-710 217-710 215-2594 215-1624 217-072

Component Notes Starter Hyd Cooler Fan Battery Main Fuse 30 Amp Mini ATC Battery Signal Fuse 3 Amp Mini ATC Engine Ignition Connection Engine Throttle Control Connection ECM DC 12V Relay Fan Relay Hour Meter Ignition Switch Throttle Switch

Ref. No. 1 2 3 4

Part No. 215-1721 215-1521 215-1199 215-1626

Quantity Description 1 Frame Harness 1 Positive Battery Cable 1 Negitive Battery Cable 1 Ground Strap

Part No.

ID0280981

95

96

ELECTRIC SCHEMATIC RT20/24

U1 CONTROL BOX BLK (7)

IGN

W

BAT

Bl/W

Gr Gr W/Bu Bl/Y W Bl

U2

ST COMBINATION SWITCH

BLK/YEL (5)

Fuse (30A)

LO

F2 G

BLK/YEL (5)

S2

GND

G

REGULATOR/ RECTIFIER

BLK (7) G

P9 J9

P8 J8

HOUR METER M2

G BLK (7)

YEL

BLK YEL (7) (6) BLU

BLU (6) (8)

(8)

W

WHT (15)

BLK/YEL BLK (7) (5)

L1 J3 P3 Bl/W

Gr

Gr

W/Bu

J4 P4

BLK (7)

STARTER MOTOR B1

BLU (8) YEL BLK/YEL (6) (5)

J10 P10

M

Gr Gr

J2 P2

CHARGE COIL (17A) G1

BLK (7) WHT/YEL (16)

BATTERY BT1

YEL BLK/YEL (6) (5) BLU (8)

RED (2)

J11 P11 FAN MOTOR M1

BLK/YEL (5)

M

BLK (1)

BLU (8) Fuse (15A)

YEL (6) BLK (7)

F1

ORG/GRN (13)

BLK/YEL (5)

5 2

4 J1 P1

BLK/YEL (5)

ORG (12)

START RELAY K1

YEL BLK/YEL (6) (5)

BLK (7)

3

1

BLU (8)

BLK/YEL (5)

L2

FUEL CUT SOLENOID No 1 IGNITION COIL P12

J5 P5 BLU (8)

BLK (7) YEL (6) E2

J6 P6

No 2 IGNITION COIL P13

SPARK PLUG

BLK 7 YEL 6 E1 SPARK PLUG J7 P7 YEL 6

02

OIL LEVEL SWITCH S1

ID0256346

97

ELECTRIC SCHEMATIC RT20/24

ELECTRICAL COMPONENTS Ref. #

Part #

Component

B1 195-1582 Starter BT1 213-270 Battery E1 see notes Spark Plug E2 see notes Spark Plug F1 217-811 Main Fuse F2 217-813 Control Box Fuse G1 Charge Coil (17A) J1 see note Engine Connection J2 see note Engine Connection J3 see note Combination switch to Starter Connection J4 see note Hourmeter to Main Harness Connection J5 Engine to No.1 Ignition Coil Connection J6 Engine to No.2 Ignition Coil Connection J7 Engine to Oil Level Switch Connection Regulator/Rectifier to Charge & Fuel Solenoid J8 Connection J9 Regulator/Rectifier to Battery Connection J10

02

Notes

supplied by Honda 12V, 340 CCA, supplied by Honda supplied by Honda 15A ATC 30A ATC No Service Parts Available Extention of Harness Extention of Harness Extention of Harness Extention of Harness

Regulator/Rectifier to Charge Coil Connection

J11 K1 L1 L2 M1 M2 P1 P2

see note Regulator/Rectifier to Engine Connection Start Relay see note Starter Solenoid see note Fuel Solenoid 500-1156 Fan see note Hourmeter Engine Connection Engine Connection

P3 P4

Combination Switch to Starter Connection Hourmeter to Main Harness Connection

P5

Engine to No.1 Ignition Coil Connection

P6

Engine to No.2 Ignition Coil Connection

P7 P8

Engine to Oil Level Switch Connection Regulator/Rectifier to Charge & Fuel Solenoid Connection

P9 P10 P11 P12 P13 S1 S2 U1 U2

Regulator/Rectifier to Battery Connection Regulator/Rectifier to Charge Coil Connection Regulator/Rectifier to Engine Connection No. 1 Iginition Coil Connection No.2 Ignition Coil Connection see note Oil Level Switch see note Combonation Switch 195-1537 Control Box 215-1328 Regulator/Rectifier

Extention of Harness Micro (SPDT) supplied by Honda 12V 12V supplied by Honda Extention of Harness Extention of Harness

Part of Engine Part of Engine No Service Parts Available Supplied by Honda

ID0256346

98

ELECTRIC SCHEMATIC RT20/24

ELECTRICAL CIRCUITS Circuit #

1 2 On Eng. On Eng. On Eng. On Eng. On Eng. 5 6 7 8 12 13 15 16

Wire Color Function blk red

gr g bl/w

w/bu w blk/yel yel blk blu org org/grn wht wht/yel

Ground to fan and relay Stater motor to fuse Regulator/Rectifier to Charge Coil (Supplied by Honda) From grnd In( Combination Switch) to Hourmeter Starter Motor to ST on Combination Switch Regulator/Rectifier to Pigtail (Supplied by Honda) Regulator/Rectifier to Bat. in (Combination Switch) Start relay to fuel cut solenoid Hourmeter in Control Box to Ignition coils & Oil Level Switch Ignition in Control Box to Ignition Coils #1, #2 Hourmeter to No.1 Ignition Coil Fuse to Starter Relay Fan motor to Start Relay From Starter Motor (+) to Bat. On (Combination Switch) Jumper from Regulator/Rectifier to Bat. in (Combination Switch)

ELECTRICAL HARNESS

02

Ref. #

Part #

Qty.

Description

1 2 3 4

215-1603

1 1 1 1

Fan Harness

215-1521 215-1199

215-1626

Battery Cable ( + Pos., Red 6 Ga. X 30") Battery Cable (- Neg., Blk 6 Ga. X 22") Ground strap (13-1/2")

ID0256346

99

100

ELECTRICAL DIAGRAM RT12 FRAME HARNESS

IGNITION COIL POWER RELAY

FAN RELAY

BLK/RED (8)

WHT/ORG (3)

3 5 24 1

3 5 24 1

BRN (9)

MAIN FUSE ORG/BRN (4)

BLK 18(1) ORG/BRN (4)

ORG/WHT (10) BLK (1)

WHT/ORG (3) A

WHT (2)

WHT/ORG (3)

B

1

BLK/WHT (5)

IGNITION SWITCH

5

1 8 2

6

YEL (11)

3

THROTTLE SWITCH

-A-

4 7

ORG/BRN (4)

LT GRN (12)

01

ID0285510

101

ELECTRICAL DIAGRAM RT12 FRAME HARNESS

TO FAN TO GROUND

ORG/WHT (10)

BLK (1) B

TO ENGINE THROTTLE CONTROL YEL (11)

LT GRN (12)

A

BLK (1)

1 BLK (1)

TO HOURMETER

-ABRN (9)

TO ENGINE IGNITION

ORG/WHT (10)

CAVITY PLUG BLK/RED (8) BLK/WHT (5)

WHT (2)

TO STARTER

01

WHT (2)

TO REGULATOR/RECTIFIER

ID0285510

102

ELECTRICAL DIAGRAM RT12 FRAME HARNESS REF PART NO. NUMBER

1

215-1821

QTY

DESCRIPTION

1

FRAME HARNESS

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0285510

103

104

NOTES:

ID0134963

105

ACCESSORIES

106

RESTRAINT BAR 2

3

4 9

5

2

8

7

5

10

1 6

11

11 13

16

16 20 19 21 14

19

17

18 12

19 15

05

ID0226576

107

RESTRAINT BAR REF PART NO. NUMBER

QTY

100-180 300-8767 106-381 300-9123 300-6602 106-386 106-632 300-8826 106-584 300-9321 141-318 106-709 141-134 300-4647 141-289 141-287 141-288 320-425 105-279 105-065 107-262 116-709

1 7 1 1 6 2 2 4 1 1 6 1 1 2 1 2 1 2 6 4 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

DESCRIPTION

MECHANICAL CLEANER CONVERSION KIT BRACKET FLG LK SCREW (M8-1.25 X 25MM) SPOILS FLAP CLAMP BAR FLG LOCKNUT (M8-1.25) FLG LK SCR (M12-1.75X35MM,SER) CLAMP BAR SCREW (M12-1.75 X 100MM) BACKUP STRAP RESTRAINT BAR FLG LK NUT (M12-1.75) CLEANER SHOE (6") CLEANER BAR REAR LINK SHOE BEAM FRONT LINK GRAB HANDLE CARRIAGE BOLT (1/2-NCX3.00") LOCKNUT (1/2-NC) LK BOLT (1/2-NC X 3-1/2",GD8) EXTENSION SPRING

REMARKS

INCL'S REF. NO.'S 14 THRU 21

SEE FOOTNOTE 3 SEE FOOTNOTE 1 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. CLEANER SHOE OPTIONS: 4" 141-290, 6" 141-134 & 8" 141-135.

2. CLEANER BAR OPTIONS: 24" 300-4647, 30" 300-4649, 36" 300-4651, & 48" 300-4653.

3. RESTRAINT BAR OPTIONS: 24" DEPTH 141-318, 30 & 36" DEPTH 141-337 & 48" DEPTH 141-156.

NOTE:

05

ID0226576

108

WEIGHT RT12/16

4

3

7

5

1

6

02

2

ID0280849

109

WEIGHT RT12/16

REF PART NO. NUMBER

QTY

1 106-580 2 105-833 3 300-8764 4 106-709 5 105-1422 6 105-065 7 300-8765

1 1 2 1 1 1 1

DESCRIPTION

REMARKS

SCREW (M12-1.75 X 180MM) FLG LOCKNUT (1/2-NC) WEIGHT (CAST) FLG LK NUT (M12-1.75) BOLT (1/2-NC X 7, GD 5, FT) LOCKNUT (1/2-NC) SPACER

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0280849

110

WEIGHTS RT20/24

2

1

10

6

3

5

8

9 7

4

04

ID0254192

111

WEIGHTS RT20/24

REF PART NO. NUMBER

QTY

1 300-8765 2 106-580 3 106-709 4 301-0503 5 105-1422 6 105-065 7 106-666 8 106-442 9 106-392 10 300-8764

1 1 1 1 1 1 2 2 2 2

DESCRIPTION

SPACER SCREW (M12-1.75 X 180MM) FLG LK NUT (M12-1.75) LOW FRAME WEIGHT BOLT (1/2-NC X 7, GD 5, FT) LOCKNUT (1/2-NC) SCREW (M16-2.00 X 65MM, 10.9) FLG LKNUT (M16-2.0,PRVTRQ10.9) WASHER (M16) WEIGHT

REMARKS

USE AS REQUIRED, SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. WHEN USING MULTIPLE FRAME WEIGHTS USE M16 BOLTS LISTED BELOW: SINGLE WEIGHT - 106-666; DOUBLE WEIGHTS - 106-342; TRIPLE WEIGHTS - 106-343 4 WEIGHTS - 106-740; 5 WEIGHTS - 105-744; 6 WEIGHTS - 107-203

NOTE:

04

ID0254192

112

BORING ATTACHMENT RT12/16

16 18 17

31

1

19

14

15 5

23

TO CHAIN DRIVE MOTOR

30 9

5 20

7 22 8

3

6 3

11 13

4

25

10 2 24

12

21 26

32

27 29

29

06

28

ID0227054

113

BORING ATTACHMENT RT12/16

REF PART NO. NUMBER

QTY

158-510 150-6055 154-279 300-8955 154-749 154-716 159-999 117-265 154-235 300-8956 107-565 106-709 110-228 154-233 154-256 106-628 106-390 106-387 154-284 117-794 307-639 110-031 110-030 351-219 105-082 105-833 182-092 160-1059 180-723 110-248 154-246 118-097

1 1 2 1 2 1 1 1 3 1 4 3 1 1 1 2 2 1 2 1 1 1 2 1 2 2 1 1 1 2 2 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

DESCRIPTION

HYD SELECTOR VALVE MOTOR, HYDRAULIC - 315CC CONNECTOR (08O-10S) ROTOWITCH MOUNT HOSE (08OFX90S-18"-3000) HOSE (08OFX90-48"-3000) HOSE (08OFX90M-50"-3000) ABRASION SLEEVE (1.75" X 50") CONNECTOR (08S-08O90) MOUNT FLG LK SCREW (M12-1.75 X 40MM) FLG LK NUT (M12-1.75) LYNCH PIN (7/16" X 2") CONNECTOR (08S-08O) UNION (08O-08OFX90) SCREW (M10-1.50 X 60MM) WASHER (M10) FLG LOCKNUT (M10-1.50) CONNECTOR (08S-08O45) ABRASION SLEEVE (1.75" X 18"") MOTOR MOUNT CABLE TIE (1/2") 20" LG CABLE TIE (1/16" TO 4") YOKE GUARD BOLT (1/2-NC X 2-1/2") FLG LOCKNUT (1/2-NC) YOKE (1-1/4", 5/16" KWY) ROTO WITCH YOKE CROSS/BEARING KIT (1-1/8") CABLE TIE (1/16" TO 11/4") CONNECTOR (06S-08O) DRILL STRING GUIDE ASSEMBLY

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2 & 3

NOT SHOWN:

FOOTNOTES:

1. O-RING SERVICE P/N 157-060, KNOB REPLACEMENT P/N 110-585 2. FOR OLD STYLE HYD MOTOR 155-579, USE SEAL KIT 500-347 FOR MOTOR VERSION 002, 003, 004 & 005.

SEAL KIT 500-658 IS TO BE USED WITH VERSION 006 MOTORS. 3. HYD. MOTOR 150-6055 BEGINS WITH S/N: CMW_______, USE SEAL KIT 500-3733

NOTE:

1. SEE O-RING CHART 300-301, IN BACK OF BOOK, FOR O-RING REPLACEMENT

06

ID0227054

114

BORING ATTACHMENT RT20/24

31 32

30 10

2

27 25

24

28 29

1

34

32

33

12 TO CHAIN DRIVE MOTOR

14

11 13 15

5 32 23

33

32

34 3 18 16

7

9

4 6 8 35

22

19 17

26 20 21

06

ID0256308

115

BORING ATTACHMENT RT20/24

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

158-510 154-246 154-279 300-8955 154-235 300-8956 107-565 106-709 110-228 106-390 106-387 154-284 117-794 117-265 110-031 150-6055 351-219 105-082 105-833 182-092 160-1059 307-639 110-248 110-030 301-0500 180-723 106-628 154-233 154-256 106-712 106-237 154-749 154-716 159-999 118-097

QTY

1 2 2 1 3 1 4 3 1 4 2 2 1 1 1 1 1 2 2 1 1 1 2 2 1 1 2 1 1 2 2 2 1 1 1

DESCRIPTION

HYD SELECTOR VALVE CONNECTOR (06S-08O) CONNECTOR (08O-10S) ROTOWITCH MOUNT CONNECTOR (08S-08O90) MOUNT FLG LK SCREW (M12-1.75 X 40MM) FLG LK NUT (M12-1.75) LYNCH PIN (7/16" X 2") WASHER (M10) FLG LOCKNUT (M10-1.50) CONNECTOR (08S-08O45) ABRASION SLEEVE (1.75" X 18"") ABRASION SLEEVE (1.75" X 50") CABLE TIE (1/2") 20" LG MOTOR, HYDRAULIC - 315CC YOKE GUARD BOLT (1/2-NC X 2-1/2") FLG LOCKNUT (1/2-NC) YOKE (1-1/4", 5/16" KWY) ROTO WITCH YOKE MOTOR MOUNT CABLE TIE (1/16" TO 11/4") CABLE TIE (1/16" TO 4") CONTROL/RW MOUNT CROSS/BEARING KIT (1-1/8") SCREW (M10-1.50 X 60MM) CONNECTOR (08S-08O) UNION (08O-08OFX90) FLG SCREW (M6-1.00 X 16MM) LOCKNUT (M6-1.00,PRV TRQ,NLK) HOSE (08OFX90S-18"-3000) HOSE (08OFX90-48"-3000) HOSE (08OFX90M-50"-3000) DRILL STRING GUIDE ASSEMBLY

REMARKS

O-RING SERVICE P/N 157-060, KNOB REPLACEMENT P/N 110-585.

SEE FOOTNOTES 1 & 2

NOT SHOWN:

190-1563 ROTO-WITCH KIT

FOOTNOTES:

1. FOR OLD STYLE HYD MOTOR 155-579, USE SEAL KIT 500-347 FOR MOTOR VERSION 002, 003, 004 & 005.

SEAL KIT 500-658 IS TO BE USED WITH VERSION 006 MOTORS. 2. HYD. MOTOR 150-6055 BEGINS WITH S/N: CMW_______, USE SEAL KIT 500-3733

NOTE:

1. SEE O-RING CHART 800-301, IN BACK OF BOOK, FOR O-RING REPLACEMENT.

06

ID0256308

116

BACKFILL BLADE

4

3 2

5

02

1

ID0290030

117

BACKFILL BLADE REF PART NO. NUMBER

1 2 3 4 5

190-1787 300-9164 302-2144 183-411 105-300 105-065

QTY

1 1 1 1 1

DESCRIPTION

BACKFILL BLADE KIT BLADE BFB MOUNT PULL PIN (1/2" X 2") BOLT (1/2 NC X 3-1/4") LOCKNUT (1/2-NC)

REMARKS

INCLUDES REF NO.'S 1-5; SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. THIS STYLE BACKFILL BLADE MOUNT WILL ONLY FIT NEW GENERATION RT PIVOTS. SEE BACKFILL BLADE PARTS PAGE ID0226981 FOR FIRST GENERATION MOUNT.

NOTE:

02

ID0290030

118

GREASE BOOM, ROLLER

12

2

15

9 13

11

3 14

2 5

11

4 12

1

10 6 8 7

06

ID0148266

119

GREASE BOOM, ROLLER REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

140-1315 115-464 125-009 142-755 105-379 115-024 105-825 319-410 105-707 180-445 105-1125 105-1126 140-1102 125-1022 115-003

QTY

1 2 1 1 1 1 2 1 1 1 2 2 1 1 1

DESCRIPTION

GREASE TENSION BOOM, 24" INTERNAL SNAP RING (3.149") BALL BEARING (W/051-345 INSTR) TAIL ROLLER (1.654"C6.8") LK BOLT (3/4-NC X 1-1/4", NLK) ZERK (02N, 5000) FLG LK BOLT (3/8-NC X 3/4) ZERK COVER SET SCREW (1/4-NF X 3/8", CUP) IDLER SHAFT (1.125"SQ X1.937") DIRT SHIELD DIRT SHIELD TAIL ROLLER - RELUBRICABLE BALL BEARING RELUBRICABLE (1.125", SQ) ZERK (1/4-NF, STR)

REMARKS

140-1316 (30"), 140-1317 (36"), SEE FOOTNOTE 2 EACH ROLLER ASSEMBLY REQUIRES ONE 115-464. - SEE FOOTNOTE 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 3 EACH ROLLER ASSEMBLY REQUIRES ONE 105-1125. - SEE FOOTNOTE 3 EACH ROLLER ASSEMBLY REQURIES ONE 105-1126. - SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

141-794 141-795 141-796 140-1114 140-1115 140-1116

GREASE BOOM ASM (24")-W/STD. ROLLER 142-754 GREASE BOOM ASM (30")-W/STD. ROLLER 142-754 GREASE BOOM ASM (36")-W/STD. ROLLER 142-754 GREASE BOOM ASM (24")-W/RELUBRICABLE ROLLER 140-1104 GREASE BOOM ASM (30")-W/RELUBRICABLE ROLLER 140-1104 GREASE BOOM ASM (36")-W/RELUBRICABLE ROLLER 140-1104

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3

FOOTNOTES:

1. 142-754 TAIL ROLLER ASSEMBLY INCL. REF #'S 2-4, 12 & 11.

2. 141-794 GREASE BOOM ASSEMBLY (24") INCL. REF #'S 1-12.

141-795 GREASE BOOM ASSEMBLY (30") INCL. REF #'S 1-12.

141-796 GREASE BOOM ASSEMBLY (36") INCL. REF #'S 1-12.

140-1114 GREASE BOOM ASSEMBLY (24"), RELUBRICALBLE, INCL. REF #'S 1-2 & 5-16.

140-1115 GREASE BOOM ASSEMBLY (30"), RELUBRICALBLE, INCL. REF #'S 1-2 & 5-16.

140-1116 GREASE BOOM ASSEMBLY (36"), RELUBRICALBLE, INCL. REF #'S 1-2 & 5-16.

3. 140-1104 TAIL ROLLER ASSEMBLY-RELUBRICALBE INCL'S REF #'S 2, 11-16.

NOTE:

06

ID0148266

120

ROLLER BOOM

2 3

10

17 15

14

3

4 5

6

16

14 10 11 12

2 9 13 7

1

8 8

10

ID0148280

121

ROLLER BOOM REF PART NO. NUMBER

QTY

1 301-8280 2 105-1126 3 115-464 4 125-009 5 142-755 6 180-445 7 106-033 8 105-136 9 105-379 10 115-003 11 105-668 12 105-833 13 106-034 14 105-1125 15 140-1102 16 125-1022 17 105-707

1 2 2 1 1 1 1 4 1 2 1 4 1 2 1 1 1

DESCRIPTION

ROLLER BOOM (24") DIRT SHIELD INTERNAL SNAP RING (3.149") BALL BEARING (W/051-345 INSTR) TAIL ROLLER (1.654"C6.8") IDLER SHAFT (1.125"SQ X1.937") JAM NUT (1-NC) BOLT (1/2-NC X 3-1/2", GD8) LK BOLT (3/4-NC X 1-1/4", NLK) ZERK (1/4-NF, STR) SET SCREW (1/4-NF X 1/4", CUP) FLG LOCKNUT (1/2-NC) SET SCREW (1-NC X 6", SQ) DIRT SHIELD TAIL ROLLER - RELUBRICABLE BALL BEARING RELUBRICABLE (1.125", SQ) SET SCREW (1/4-NF X 3/8", CUP)

REMARKS

301-8211 (30"), 301-8215 (36"), 301-8202 (42"), 301-8238 (42") - F/N 2 EACH ROLLER ASSEMBLY REQUIRES ONE 105-1126 - SEE F/N 1 & 3 EACH ROLLER ASSEMBLY REQUIRES ONE 115-464 - SEE F/N 1 & 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1 FOR QTY= 1

EACH ROLLER ASSEMBLY REQUIRES ONE 105-1125 - SEE F/N 1 & 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

141-792 141-793 141-791 140-1240 140-531 140-1112 140-1113 140-1111 140-1285 140-1106

ROLLER BOOM ASSEMBLY (24") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (30") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (36") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (42") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (48") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (24") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (30") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (36") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (42") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (48") W/RELUBRICABLE ROLLER 140-1104

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 2 &3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3

FOOTNOTES:

1. 142-754 TAIL ROLLER ASSEMBLY, INCL. REF #'S 2-5, 14 2. 141-792 ROLLER BOOM ASSEMBLY (24"), INCL. REF #'S 1-14 141-793 ROLLER BOOM ASSEMBLY (30"), INCL. REF #'S 1-14 141-791 ROLLER BOOM ASSEMBLY (36"), INCL. REF #'S 1-14 140-1240 ROLLER BOOM ASSEMBLY (42"), INCL. REF #'S 1-14 140-531 ROLLER BOOM ASSEMBLY (48"), INCL. REF #'S 1-14 140-1112 ROLLER BOOM ASSEMBLY (24"), INCL. REF #'S 1-3 & 6-17 140-1113 ROLLER BOOM ASSEMBLY (30"), INCL. REF #'S 1-3 & 6-17 140-1111 ROLLER BOOM ASSEMBLY (36"), INCL. REF #'S 1-3 & 6-17 140-1285 ROLLER BOOM ASSEMBLY (42"), INCL. REF #'S 1-3 & 6-17 140-1106 ROLLER BOOM ASSEMBLY (48"), INCL. REF #'S 1-3 & 6-17 3. 140-1104 TAIL ROLLER ASSEMBLY-RELUBRICALBLE INCL'S REF #'S: 2, 3, 10 & 14 THRU 17.

NOTE:

10

ID0148280

122

LOW PROFILE SPROCKET BOOM

3

2

16

15

14 4 6 3

14 10

10 5

12

2

9 13 7 1 8

01

11

ID0336937

123

LOW PROFILE SPROCKET BOOM REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 ROLLER BOOM (24") 2 DIRT SHIELD 2 INTERNAL SNAP RING (3.149") 1 BALL BEARING (W/051-345 INSTR) 1 LOW PROFILE SPROCKET, SEALED 1 IDLER SHAFT (1.125"SQ X1.937") 1 JAM NUT (1-NC) 4 FLG LOCKNUT (1/2-NC) 1 LK BOLT (3/4-NC X 1-1/4", NLK) 2 ZERK (1/4-NF, STR) 1 CHAIN TENSION 4 BOLT (1/2-NC X 2-3/4") 1 SET SCREW (1-NC X 6", SQ) 2 DIRT SHIELD 1 LOW PROFILE SPROCKET, GREASABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ)

301-8280 105-1126 115-464 125-009 140-1298 180-445 106-033 105-833 105-379 115-003 275-043 105-067 106-034 105-1125 140-1299 125-1022

DESCRIPTION

REMARKS

301-8211 (30") 301-8215 (36") 301-8202 (42") 301-8238 (48") - F/N 2 EACH ROLLER ASSY REQUIRES ONE 105-1126 - SEE F/N 1 & 3 EACH ROLLER ASSY REQUIRES ONE 115-464 - SEE F/N 1 & 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1, QTY = 1 PER ROLLER AND 1 PER BOOM

EACH ROLLER ASSY REQUIRES ONE 105-1125 - SEE F/N 1 & 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

140-1302 140-1287 140-1288 140-1304 140-1306 140-1303 140-1292 140-1293 140-1305 140-1307

LOW PROFILE SPROCKET BOOM, SEALED (24") LOW PROFILE SPROCKET BOOM, SEALED (30") LOW PROFILE SPROCKET BOOM, SEALED (36") LOW PROFILE SPROCKET BOOM, SEALED (42") LOW PROFILE SPROCKET BOOM, SEALED (48") LOW PROFILE SPRKT BOOM,GREASABLE (24") LOW PROFILE SPRKT BOOM,GREASABLE (30") LOW PROFILE SPRKT BOOM,GREASABLE (36") LOW PROFILE SPRKT BOOM,GREASABLE (42") LOW PROFILE SPRKT BOOM,GREASABLE (48")

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3

FOOTNOTES:

1- 140-1289 LOW PROFILE SPROCKET ASSY, SEALED, INCL REF #'S 2-5 AND 14 2- 140-1302 LOW PROFILE SPROCKET BOOM, SEALED (24"), INCL REF #'S 1-14 140-1287 LOW PROFILE SPROCKET BOOM, SEALED (30"), INCL REF #'S 1-14 140-1288 LOW PROFILE SPROCKET BOOM, SEALED (36"), INCL REF #'S 1-14 140-1304 LOW PROFILE SPROCKET BOOM, SEALED (42"), INCL REF #'S 1-14 140-1306 LOW PROFILE SPROCKET BOOM, SEALED (48"), INCL REF #'S 1-14 140-1303 LOW PROFILE SPROCKET BOOM, GREASABLE (24"), INCL REF #'S 1-3,6-16 140-1292 LOW PROFILE SPROCKET BOOM, GREASABLE (30"), INCL REF #'S 1-3,6-16 140-1293 LOW PROFILE SPROCKET BOOM, GREASABLE (36"), INCL REF #'S 1-3,6-16 140-1305 LOW PROFILE SPROCKET BOOM, GRESABLE (42"), INCL REF #'S 1-3,6-16 140-1307 LOW PROFILE SPROCKET BOOM, GREASABLE (48"), INCL REF #'S 1-3,6-16 3- 140-1290 LOW PROFILE SPROCKET ASSY, GREASABLE, INCL REF #'S 2,3,10,14-16 NOTE:

01

ID0336937

124

GREASE BOOM, SPROCKET

9

12

3 4

5

2

1

10 11

6 8

01

7

ID0337901

125

GREASE BOOM, SPROCKET REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12

1 GREASE TENSION BOOM, 24" 1 INTERNAL SNAP RING (3.149") 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 LOW PROFILE SPROCKET, GREASABLE 1 LK BOLT (3/4-NC X 1-1/4", NLK) 1 ZERK (02N, 5000) 2 FLG LK BOLT (3/8-NC X 3/4) 1 ZERK COVER 1 ZERK (1/4-NF, STR) 1 IDLER SHAFT (1.125"SQ X1.937") 1 DIRT SHIELD 1 DIRT SHIELD

140-1315 115-464 125-1022 140-1299 105-379 115-024 105-825 319-410 115-003 180-445 105-1126 105-1125

DESCRIPTION

REMARKS

140-1316 (30") 140-1317 (36") SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

140-1318 140-1319 140-1327

GREASE BOOM ASSY (24"), SPROCKET GREASE BOOM ASSY (30"), SPROCKET GREASE BOOM ASSY (36"), SPROCKET

INCL'S REF #1-12 INCL'S REF #1-12 INCL'S REF #1-12

FOOTNOTES:

1. 140-1290 LOW PROFILE SPROCKET ASSY, GREASABLE - INCL'S REF#2, 3, 4, 9, 11 & 12

NOTE:

01

ID0337901

126

24" SPLIT BOOM ASSY

5

3

11

4 6

10

12 7

8 22

19

15

23

17 2

1 14

18

18

21

16

13

16

20

17

9 24

18

16

15

17 16

25

18

FOOTNOTE 4 21

FOOTNOTE 3 17 06

23 ID0160966

127

24" SPLIT BOOM ASSY REF PART NO. NUMBER

QTY

1 140-1158 2 105-136 3 300-2687 4 300-2685 5 105-833 6 105-975 7 105-310 8 106-073 9 106-212 10 300-2686 11 106-301 12 105-357 13 105-076 14 300-2688 15 125-009 16 105-1126 17 105-1125 18 115-464 19 142-755 20 140-1102 21 125-1022 22 105-707 23 115-003 24 140-1298 25 140-1299

2 ABRASION RESISTANT SPLIT BOOM, 24" 4 BOLT (1/2-NC X 3-1/2", GD8) 2 SPACER 1 ADJUSTMENT BLOCK 4 FLG LOCKNUT (1/2-NC) 3 WASHER (3/4") 1 JAM NUT (3/4-NC) 1 BOLT (3/4-NC X 6") 1 BOLT (5/8-NC X 3-1/2") 2 TUBE SPACER 2 LOCKNUT (1/2-NC, NLK) 1 LOCKNUT (5/8-NC) 2 BOLT (1/2-NC X 3") 1 IDLER BLOCK 1 BALL BEARING (W/051-345 INSTR) 2 DIRT SHIELD 2 DIRT SHIELD 2 INTERNAL SNAP RING (3.149") 1 TAIL ROLLER (1.654"C6.8") 1 TAIL ROLLER - RELUBRICABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 SET SCREW (1/4-NF X 3/8", CUP) 1 ZERK (1/4-NF, STR) 1 LOW PROFILE SPROCKET, SEALED 1 LOW PROFILE SPROCKET, GREASABLE

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 4 SEE FOOTNOTE 3

NOT SHOWN:

140-1162 140-1122 140-1101 140-1310

24" SPLIT BOOM ASSY, ROLLER RELUBRICABLE - 24" SPLIT BOOM ASSY, ROLLER 24" SPLIT BOOM ASSY, SPROCKET-GREASEABLE 24" SPLIT BOOM ASSY, SPROCKET-SEALED

INCLUDES REF. #'S 1-19 INCLUDES REF. #'S 1-13, 14, 16, 17, 18 & 20-23.

INCLUDES REF. #'S 1-14, 16-18 21,23 & 25 INCLUDES REF. #'S 1-18 & 24

FOOTNOTES:

1. 142-754 TAIL ROLLER (1.654"C6.8") INCLUDES REF NO.'S, 15-19.

2. 140-1104 TAIL ROLLER RELUBRICABLE INCLUDES REF NO.'S, 16-18, & 20-23.

3. 140-1290 LOW PROFILE SPROCKET ASSY, GREASEABLE - INC'L REF #'S 16, 17, 18, 21 & 23.

4. 140-1289 LOW PROFILE SPROCKET ASSY, SEALED - INC'L REF #'S 15, 16, 17 & 18

NOTE:

06

ID0160966

128

30" SPLIT BOOM ASSY

5

3 11 4 6

12 7 8

10

16 22 23

15 14 2

17

1 18

13 16

18

21 17

9

24

18

19

20

16

15

17 16

25

18

FOOTNOTE 4

21

17 05

FOOTNOTE 3 23 ID0169774

129

30" SPLIT BOOM ASSY REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

2 ABRASION RESISTANT SPLIT BOOM, 30" 4 BOLT (1/2-NC X 3-1/2", GD8) 2 SPACER 1 ADJUSTMENT BLOCK 4 FLG LOCKNUT (1/2-NC) 3 WASHER (3/4") 1 JAM NUT (3/4-NC) 1 BOLT (3/4-NC X 6") 1 BOLT (5/8-NC X 3-1/2") 2 TUBE SPACER 2 LOCKNUT (1/2-NC, NLK) 1 LOCKNUT (5/8-NC) 2 BOLT (1/2-NC X 3") 1 IDLER BLOCK 1 BALL BEARING (W/051-345 INSTR) 2 DIRT SHIELD 2 DIRT SHIELD 2 INTERNAL SNAP RING (3.149") 1 TAIL ROLLER (1.654"C6.8") 1 TAIL ROLLER - RELUBRICABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 SET SCREW (1/4-NF X 3/8", CUP) 1 ZERK (1/4-NF, STR) 1 LOW PROFILE SPROCKET, SEALED 1 LOW PROFILE SPROCKET, GREASABLE

140-1161 105-136 300-2687 300-2685 105-833 105-975 105-310 106-073 106-212 300-2686 106-301 105-357 105-076 300-2688 125-009 105-1126 105-1125 115-464 142-755 140-1102 125-1022 105-707 115-003 140-1298 140-1299

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 4

NOT SHOWN:

140-1163 140-1123 140-1100 140-1100

30" SPLIT BOOM ASSY, ROLLER RELUBRICABLE - 30" SPLIT BOOM ASSY, ROLLER 30" SPLIT BOOM ASSY, SPROCKET, GREASEABLE 30" SPLIT BOOM ASSY, SPROCKET, SEALED

INLC'S REF #1-19 INCLUDES REF. #'S 1-13, 14, 16, 17, 18 & 20-23.

INCLUDES REF. #'S 1-14 16-18, 21 ,23 & 25 INCLUDES REF. #'S 1-18 & 24

FOOTNOTES:

1. 142-754 TAIL ROLLER (1.654"C6.8") INCLUDES REF NO.'S 15-19.

2. 140-1104 TAIL ROLLER RELUBRICABLE INCLUDES REF NO.'S 16-18 & 20-23.

3. 140-1290 LOW PROFILE SPROCKET ASSY, GREASEABLE - INC'L REF #'S 16, 17, 18, 21 & 23.

4. 140-1289 LOW PROFILE SPROCKET ASSY, SEALED - INC'L REF #'S 15, 16, 17 & 18

NOTE:

05

ID0169774

130

36" SPLIT BOOM ASSEMBLY

2 1

13

3 1

4 6

9 7

10

8

10

15

19

5

17 17

18 22 23 11

14 16

14

12 24

18 21

18

17 20 16

16

25

21

15 FOOTNOTE 4

18

16

17

FOOTNOTE 3 23 01

ID0346834

131

36" SPLIT BOOM ASSEMBLY REF PART NO. NUMBER

QTY

1 140-1329 2 105-136 3 300-2687 4 300-2685 5 105-833 6 105-975 7 105-310 8 106-073 9 106-212 10 300-2686 11 106-301 12 105-357 13 105-076 14 300-2688 15 125-009 16 105-1125 17 105-1126 18 115-464 19 142-755 20 140-1102 21 125-1022 22 105-707 23 115-003 24 140-1298 25 140-1299

2 36" SPLIT BOOM SIDE 4 BOLT (1/2-NC X 3-1/2", GD8) 2 SPACER 1 ADJUSTMENT BLOCK 4 FLG LOCKNUT (1/2-NC) 3 WASHER (3/4") 1 JAM NUT (3/4-NC) 1 BOLT (3/4-NC X 6") 1 BOLT (5/8-NC X 3-1/2") 6 TUBE SPACER 6 LOCKNUT (1/2-NC, NLK) 1 LOCKNUT (5/8-NC) 6 BOLT (1/2-NC X 3") 1 IDLER BLOCK 1 BALL BEARING (W/051-345 INSTR) 1 DIRT SHIELD 1 DIRT SHIELD 1 INTERNAL SNAP RING (3.149") 1 TAIL ROLLER (1.654"C6.8") 1 TAIL ROLLER - RELUBRICABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 SET SCREW (1/4-NF X 3/8", CUP) 1 ZERK (1/4-NF, STR) 1 LOW PROFILE SPROCKET, SEALED 1 LOW PROFILE SPROCKET, GREASABLE

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 4 SEE FOOTNOTE 3

NOT SHOWN:

140-1334 140-1333 140-1328 140-1332

36" SPLIT BOOM ASSY, ROLLER-SEALED 36" SPLIT BOOM ASSY, ROLLER-GREASABLE 36" SPLIT BOOM ASSEMBLY, SPROCKET 36" SPLIT BOOM ASSY, SPROCKET, SEALED

INCLUDES REF. #'S 1-19 INCLUDES REF. #'S 1-13, 14, 16, 17, 18 & 20-23.

INCLUDES REF. #'S 1-14, 16-18 21,23 & 25 INCLUDES REF. #'S 1-18 & 24

FOOTNOTES:

1. 142-754 TAIL ROLLER (1.654"C6.8") INCLUDES REF NO.'S, 15-19.

2. 140-1104 TAIL ROLLER RELUBRICABLE INCLUDES REF NO.'S, 16-18, & 20-23.

3. 140-1290 LOW PROFILE SPROCKET ASSY, GREASEABLE - INC'L REF #'S 16, 17, 18, 21 & 23.

4. 140-1289 LOW PROFILE SPROCKET ASSY, SEALED - INC'L REF #'S 15, 16, 17 & 18

NOTE:

01

ID0346834

132

35K DURATOOTH CHAINS 4P CHAIN ASSEMBLIES

2

1

3 4

5 8

6

7

CHAIN ASSEMBLIES

REPAIR PART# 130-1101 130-1102 130-1103 130-1104 135-1230 135-1231 106-400 105-099 137-214 105-047 136-029 105-258

04

135-1601 1 0 0 0 6 7 13 13 13 26 0 0

135-1602 0 1 0 0 8 8 16 16 16 32 0 0

135-1603 135-1604 135-1605 135-1606 135-1607 135-1608 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 1 0 1 1 0 0 0 9 11 8 10 6 8 7 8 8 11 9 11 12 7 8 9 17 21 12 17 21 7 8 9 24 25 32 17 21 19 32 34 44 34 42 26 0 6 8 8 10 0 16 20 0 12 16 0

ID0436038

133

35K DURATOOTH CHAINS 4P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-1601 135-1602 135-1603 135-1604 135-1605 135-1606 135-1607 135-1608

DESCRIPTION

REMARKS

35K 4P DURA 52P 4.4 35K 4P DURA 62P 4.4 35K 4P DURA 68P 4.4 35K 4P DURA 84P 4.4 35K 4P DURA 52P 6.4 35K 4P DURA 62P 6.4 35K 4P DURA 68P 6.4 35K 4P DURA 84P 6.4

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

130-1101 35K 4P DIG CHAIN 52P 130-1102 35K 4P DIG CHAIN 62P 130-1103 35K 4P DIG CHAIN 68P 130-1104 35K 4P DIG CHAIN 84P 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-099 BOLT (3/8-NC X 7/8") 137-214 LONG SPACER, 35K DIG CHAIN 105-047 LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-258 BOLT (3/8-NC X 3-3/4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085.

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

04

ID0436038

134

35K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

1 2 3 4 5 6

11 10 9 8 7

CHAIN ASSEMBLIES

REPAIR PART# 135-1600 137-218 135-1531 0 0 137-208 0 0 130-1105 1 0 137-210 0 0 137-209 0 1 135-1230 11 13 135-1231 11 13 106-400 22 26 105-099 22 26 137-214 22 26 105-047 44 52 136-029 0 0 105-258 0 0

02

137-217 0 0 0 0 1 13 13 14 14 38 52 12 24

137-215 0 0 0 1 0 15 16 31 31 31 62 0 0

137-216 0 0 0 1 0 15 16 15 15 47 62 16 32

137-219 1 0 0 0 0 17 17 34 34 34 68 0 0

137-221 1 0 0 0 0 17 17 18 18 50 68 16 32

135-1450 135-1451 0 0 1 1 0 0 1 1 0 0 19 19 20 20 39 19 39 19 39 59 78 78 0 20 0 40

137-220 1 1 0 0 0 21 21 42 42 42 84 0 0

137-222 1 1 0 0 0 21 21 22 22 62 84 20 40

ID0440801

135

35K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 137-219 2 137-216 3 137-215 4 137-217 5 137-218 6 135-1600 7 137-221 8 135-1450 9 135-1451 10 137-220 11 137-222

1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

35K 2P DURA 68P 4.6 35K 2P DURA 62P 6.6 35K 2P DURA 62P 4.6 35K 2P DURA 52P 6.6 35K 2P DURA 52P 4.6 35K 2P DURA 44P 4.4 35K 2P DURA 68P 6.6 35K 2P DURA 78P 4.6 35K 2P DURA 78P 6.6 35K 2P DURA 84P 4.6 35K 2P DURA 84P 6.6

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 130-1105 35K 2P DIG CHAIN 44P 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-099 BOLT (3/8-NC X 7/8") 137-214 LONG SPACER, 35K DIG CHAIN 105-047 LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-258 BOLT (3/8-NC X 3-3/4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085.

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0440801

136

35K ALLIGATOR/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

5

6

4 3 2 1

REPAIR PART# 137-229 135-1531 0 137-208 0 130-1105 0 137-210 0 137-209 1 135-1230 6 135-1231 6 136-163 2 136-165 2 136-164 10 106-400 12 105-098 40 137-214 40 137-212 12 105-814 52 136-029 0 105-022 0

03

CHAIN ASSEMBLIES 137-230 0 0 0 1 0 8 7 3 3 10 16 46 46 16 62 0 0

137-231 1 0 0 0 0 6 6 5 5 12 12 56 56 12 68 0 0

135-1456 135-1457 137-232 0 0 1 1 1 1 0 0 0 1 1 0 0 0 0 7 10 135 6 9 7 6 3 7 6 3 7 14 14 14 12 12 16 66 42 68 66 66 68 12 12 16 78 78 84 0 12 0 0 24 0

ID0440916

137

35K ALLIGATOR/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

137-229 137-230 137-231 135-1456 135-1457 137-232

DESCRIPTION

35K 2P CMB DUR/ALG B 52P 4.6 35K 2P CMB DUR/ALG B 62P 4.6 35K 2P CMB DUR/ALG B 68P 4.6 35K 2P CMB DUR/ALG B 78P 4.6 35K 2P DURA/ALG B/O COM 78P 6.6 35K 2P CMB DUR/ALG B 84P 4.6

REMARKS

USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 130-1105 35K 2P DIG CHAIN 44P 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 136-163 RIGHT BIT HOLDER 136-164 CENTER BIT HOLDER 136-165 LEFT BIT HOLDER 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-098 BOLT (3/8-NC X 3") 137-214 LONG SPACER, 35K DIG CHAIN 137-212 SHORT SPACER, 35K DIG CHAIN 105-814 FLG LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-022 BOLT (3/8-NC X 4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K&35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

03

ID0440916

138

35K SHARK/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

1

2

3

4

03

7 8

CHAIN ASSEMBLIES

REPAIR PART# 137-233 135-1531 0 137-208 0 130-1105 0 137-210 0 137-209 1 135-1230 6 135-1231 6 135-637 2 135-638 2 135-639 10 106-400 12 105-098 40 137-214 40 137-212 12 105-814 52 136-029 0 105-022 0

6

5

135-1021 0 0 0 0 1 6 6 2 2 10 12 20 40 12 52 10 20

137-235 0 0 0 1 0 8 7 3 3 10 16 46 46 16 62 0 0

137-236 1 0 0 0 0 6 6 5 5 12 12 56 56 12 68 0 0

135-1445 135-1454 135-1455 137-237 1 0 0 1 0 1 1 1 0 0 0 0 0 1 1 0 0 0 0 0 6 7 10 7 6 6 9 7 4 6 3 6 4 6 3 6 14 14 14 16 12 16 12 16 28 62 42 68 56 62 66 68 12 16 12 16 68 78 78 84 14 0 12 0 28 0 24 0

ID0440984

139

35K SHARK/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

137-233 135-1021 137-235 137-236 135-1445 135-1454 135-1455 137-237

DESCRIPTION

REMARKS

35K 2P CMB DUR/SHK B 52P 4.6 35K 2P CMB DURA/SHK B 52P 6.6 35K 2P CMB DUR/SHK B 62P 4.6 35K 2P CMB DUR/SHK B 68P 4.6 35K 2P SHK B/O COM 68P 6.0 35K 2P CMB DUR/SHK B 78P 4.6 35K 2P CMB DUR/SHK B 78P 6.6 35K 2P CMB DUR/SHK B 84P 4.6

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 130-1105 35K 2P DIG CHAIN 44P 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 135-637 33/35K RIGHT BOLT-ON SHARK ADAPTER 135-638 33/35K LEFT BOLT-ON SHARK ADAPTER 135-639 33/35K CENTER CUT BOLT-ON SHARK ADAPTER 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-098 BOLT (3/8-NC X 3") 137-214 LONG SPACER, 35K DIG CHAIN 137-212 SHORT SPACER, 35K DIG CHAIN 105-814 FLG LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-022 BOLT (3/8-NC X 4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K &35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

03

ID0440984

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

140

35K SHARK & ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

5

4 3

2

1

6

03

8

CHAIN ASSEMBLIES

REPAIR PART# 135-1531 137-208 137-210 137-209 136-163 136-164 136-165 135-637 135-638 135-639 106-400 105-098 137-214 137-212 105-814 136-029 105-022

7

137-223 0 0 0 1 4 18 4 0 0 0 16 36 36 16 52 0 0

137-224 0 0 1 0 5 21 5 0 0 0 20 42 42 20 62 0 0

137-225 1 0 0 0 5 24 5 0 0 0 24 44 44 24 68 0 0

137-226 0 0 0 1 0 0 0 4 4 18 16 36 36 16 52 0 0

137-227 0 0 1 0 0 0 0 5 5 21 20 42 42 20 62 0 0

137-228 1 0 0 0 0 0 0 5 5 24 24 44 44 24 68 0 0

135-1452 135-1453 0 0 1 1 1 1 0 0 0 0 0 0 0 0 6 6 6 6 27 27 24 24 54 30 54 54 24 24 78 78 0 12 0 24

ID0444723

141

35K SHARK & ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

137-226 137-227 137-228 135-1452 135-1453 137-223 137-224 137-225

DESCRIPTION

35K 2P SHK B/O 52P 4.3 35K 2P SHK B/O 62P 4.3 35K 2P SHK B/O 68P 4.3 35K 2P SHK B/O 78P 4.3 35K 2P SHK B/O 78P 6.3 35K 2P ALG B/O 52P 4.3 35K 2P ALG B/O 62P 4.3 35K 2P ALG B/O 68P 4.3

REMARKS

SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 136-163 RIGHT BIT HOLDER 136-164 CENTER BIT HOLDER 136-165 LEFT BIT HOLDER 135-637 33/35K RIGHT BOLT-ON SHARK ADAPTER 135-638 33/35K LEFT BOLT-ON SHARK ADAPTER 135-639 33/35K CENTER CUT BOLT-ON SHARK ADAPTER 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-098 BOLT (3/8-NC X 3") 137-214 LONG SPACER, 35K DIG CHAIN 137-212 SHORT SPACER, 35K DIG CHAIN 105-814 FLG LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-022 BOLT (3/8-NC X 4")

FOOTNOTES:

1. USES 131-259 INSERT BITS

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

03

ID0444723

142

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS

HAMMER 3 5

4

SLIDE HAMMER 3 1

2

H

801-056

143

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS REF PART NO. NUMBER

1.

2.

3.

4.

5.

259-002 259-001 259-036 105-403 105-357 183-072 259-003

QTY

1 1 2 1 1

DESCRIPTION

REMARKS

BIT PULLER - SLIDE HAMMER BIT PULLER - HAMMER BIT PULLER JAM NUT (5/8-NC) LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER

INCL REF NO.'S 1 - 5 EARLY STYLE

FOOTNOTES

NOTE:

H

801-056

144

SPECIAL TOOLS - ALIG BIT PUNCH

5

3

4

1 9 2 8

6

H

7

801-057

145

SPECIAL TOOLS - ALIG BIT PUNCH REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

259-150 105-708 105-964 105-994 183-072 259-003 259-151 259-152 259-153 105-357

QTY

DESCRIPTION

REMARKS

INCL REF NO.'S 1 THRU 8

2 1 1 1 1 1 1 1 1

BIT PUNCH - SLIDE HAMMER SET SCREW (3/8-NC X 3/8", NLK) WASHER (.656") FLG LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER HEAVY BIT PUNCH-SLIDE HAMMER LIGHT BIT PUNCH-SLIDE HAMMER PUNCH ADAPTER-SLIDE HAMMER LOCKNUT (5/8-NC)

FOOTNOTES

NOTE:

H

801-057

146

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

147

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

148

WHEEL TRACK ASSEMBLY RT20/24

18

1 2 5

15 14 21 20

4

4

19

16 13

23 22

12 3

17

A 24 10

11

9 8 6

7

TURN NOTCHED EDGE OF STOP UP

01

DETAIL A

ID0280925

149

WHEEL TRACK ASSEMBLY RT20/24

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

125-1034 140-1175 300-8969 125-1035 105-1394 300-8976 170-1057 105-1303 105-825 300-7979 105-1301 106-659 106-031 106-383 115-005 300-8961 115-452 362-1410 105-1405 105-1404 105-1403 300-9365 106-497 106-387

QTY

1 1 1 2 1 1 4 4 4 4 4 2 2 2 1 1 1 1 1 1 1 1 4 4

DESCRIPTION

BEARING HUB 13T SPROCKET HUB ASSEMBLY TAPERED BRG. 1.378 ID X 2.835 OD X .719 W INTERNAL SEAL,1.875 ID 2.875 O.D .315THK AXLE FRAME WELDMENT TRACK ROLLER 7" WASHER (.406 X 1.312 X .120) FLG LK BOLT (3/8-NC X 3/4) WHEEL CAP INTERNAL SNAP RING (2.188) SCREW (M12-1.75 X 55MM, 8.8) LOCKNUT (M12-1.75, NLK) FLG LK SCREW (M10-1.50 X 30MM) ZERK (1/4-NF, 90) GREASE CAP EXTERNAL SNAP RING N5000-300 RUBBER TRACK 200MM,21P,72MM 1" D-WASHER REG DUTY SPINDLE NUT 1"-14 UNF SPINDLE NUT RETAINER WHEEL TRACK STOP FLG SCREW (M10-1.50 X 35MM) FLG LOCKNUT (M10-1.50)

REMARKS

SEE FOOTNOTE 1

USE LOCKTITE 242

SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. INSTALL SEAL WITH SMOOTH SURFACE TO INSIDE. GREASE RUBBER OF SEAL BEFORE INSTALLING ONTO 125-1034 2. TORQUE NUT TO 60 INCH LBS BEFORE INSTALLING ON 105-1403

NOTE:

01

ID0280925

150

WHEEL TRACK ASSEMBLY BEGINS WITH DATE CODE 0710

5

2 8 11 7 6 21 17

1

18 19

12

9 10

13

20

4 3

14 16 15 04

ID0250793

151

WHEEL TRACK ASSEMBLY BEGINS WITH DATE CODE 0710 REF PART NO. NUMBER

QTY

301-0560 125-1047 140-1175 301-0006 105-1301 362-1410 300-8945 105-1394 115-005 300-8961 115-452 106-383 106-031 106-659 105-1303 105-825 300-7979 105-382 105-381 105-380 170-1057 125-1046

1 1 1 4 1 1 1 1 1 1 2 2 2 4 4 4 1 1 1 4 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

DESCRIPTION

REMARKS

TRACK ASSEMBLY BEARING HUB 13T SPROCKET AXLE FRAME WELDMENT INTERNAL SNAP RING (2.188) RUBBER TRACK 200MM,21P,72MM HUB ASSEMBLY INTERNAL SEAL,1.875 ID 2.875 O.D .315THK ZERK (1/4-NF, 90) GREASE CAP EXTERNAL SNAP RING N5000-300 FLG LK SCREW (M10-1.50 X 30MM) LOCKNUT (M12-1.75, NLK) SCREW (M12-1.75 X 55MM, 8.8) WASHER (.406 X 1.312 X .120) FLG LK BOLT (3/8-NC X 3/4) WHEEL CAP TANG WASHER (1-5/16") THRUST LOCKWASHER (1-5/16") THRUST LOCKNUT (1-5/16" NEF) TRACK ROLLER 7" BEARING ASSEMBLY

INCLUDES ITEMS 1-21, SEE FOOTNOTE 9

ZAHN 4 WHEEL TRACK (EARLY) ZAHN 2 WHEEL TRACK (EARLY) RT10/RT12 WHEEL TRACK (EARLY) ZAHN 4 WHEEL TRACK ZAHN 2 WHEEL TRACK PEDESTRIAN TRENCHER WHEEL TRACK

SEE FOOTNOTE 1, 5 AND 6 SEE FOOTNOTE 1, 5 AND 6 SEE FOOTNOTE 1, 5 AND 7 SEE FOOTNOTE 1 AND 5 SEE FOOTNOTE 1 AND 5 SEE FOOTNOTE 1 AND 5

SEE FOOTNOTE 7

SEE FOOTNOTE 7

USE LOCKTITE 242 OR EQUIVALENT SEE FOOTNOTE 1 & 2 USE WHITTET-HIGGINS SOCKET BAS-065 OR EQUIVALENT TO REMOVE SEE FOOTNOTE 3

NOT SHOWN:

190-1593 190-1594 190-1595 190-1596 190-1597 190-1598 FOOTNOTES:

1. KIT TO UPGRADE RUBBER TIRE MACHINE TO TRACKS. 2. TORQUE TO 200 FT-LBS THEN TIGHTEN UNTIL TAB ALIGNS WITH SLOT. 3. APPLY ANTI-SIEZE TO WASHER AND NUT FACE BEFORE TORQUING NUT. 4. MATCHED BEARING AND SPACER SET. DO NOT REPLACE INDIVIDUAL BEARING, OR RE-USE OLD SPACER & SNAPRINGS WITH NEW BEARINGS. 5. KITS INCLUDE MULTIPLE TRACK ASSEMBLIES, ARTICULATION STOPS (FOR ZAHN UNITS,) AND TRACK ROTATION STOPS. 6. KIT INCLUDES NEW BRAKE ROTORS AND OPERATOR'S PLATFORM MOUNTS. 7. KIT INCLUDES NEW BRAKE ROTOR 8. DATE CODE STAMPED ON THIS PART. 9. TRACK ASSEMBLY 301-0560 IS NON-SELLABLE. IF NEEDING TO REPLACE ONE OF TRACK ASSEMBLY, 301-0560, ORDER KIT 190-1644.

NOTE:

04

ID0250793

152

RIGID TRACK ASSEMBLY

3

2

1

6

5 8 7 10

02

4

9

ID0271187

153

RIGID TRACK ASSEMBLY REF PART NO. NUMBER

QTY

1 301-2112 2 301-2113 3 362-1410 4 170-1057 5 105-054 6 105-159 7 105-1303 8 105-825 9 300-7979 10 105-1301

2 TRACK SPROCKET 1 TRACK FRAME 1 RUBBER TRACK 200MM,21P,72MM 4 TRACK ROLLER 7" 5 LUG NUT (7/16-NF) 5 CAM WASHER (1/2") 4 WASHER (.406 X 1.312 X .120) 4 FLG LK BOLT (3/8-NC X 3/4) 4 WHEEL CAP 4 INTERNAL SNAP RING (2.188)

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2

NOT SHOWN:

301-2118 1 RIGHT TRACK FRAME

FOOTNOTES:

1- LUGNUTS ARE TO BE INSTALLED IN REVERSE OF TYPICAL APPLICATION. 2- USE LOCTITE 242 OR EQUIVALENT

NOTE:

02

ID0271187

154

WHEEEL TRACK ROTATION STOPS

1

01

ID0259024

155

WHEEEL TRACK ROTATION STOPS REF PART NO. NUMBER

1

300-6319

QTY

DESCRIPTION

1 ROTATION STOP

REMARKS

ONE STOP PER TRACK REQUIRED. SEE FOOTNOTE 1.

NOT SHOWN:

FOOTNOTES:

1. USE EXISTING MOTOR MOUNTING BOLT (107-507) WITHOUT THE WASHER. WHEEL TRACK ROTATION STOPS ARE INCLUDED WITH THE TRACK INSTALLATION KIT. SEE WHEEL TRACK ASSEMBLY PAGE FOR KIT INFORMATION.

NOTE:

OLDER MACHINES MAY REQUIRE REMOVAL OF THE BRAKE ROTOR TO REMOVE THE EXISTING MOTOR MOUNT BOLTS. IF SO, UPDATE THE BRAKE ROTOR TO THE NEWER STYLE, AND REINSTALL BRAKE HUB TO PROPER TOURQUE VALUE.

01

ID0259024

156

NOTES:

ID0134963

157

MISCELLANEOUS

ID0135063

158

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

159

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

160

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

161

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

162

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which are D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

163

164

RT12/RT16/RT20/RT24 Related Publications Component Model: RT12/16/20/24 ......

RT12/16/20/24 ......

RT12/16/20/24 ......

RT12/16/20/24 ......

Ass’y

P/N

Parts Manual .................................................................. ............. 053-2438 Operators Manual ........................................................... ............. 053-2439 Repair Guide (Service Manual) ...................................... .................. N/A Supplementary Maint Guide - Trencher ......................... .............. 050-633

Engine (RT12): Honda .................... Parts Manual .................................................................... ............. 053-2458 Honda .................... Operators Manual ............................................................ ............. 053-2460 Honda .................... Service (Shop) Manual .................................................... ............. 053-2496 Engine (RT16): Briggs .................... Parts Manual .................................................................... ............. 053-1370 Briggs .................... Operators Manual ............................................................ ............. 053-2452 Briggs .................... Service (Shop) Manual .................................................... ............. 053-1368 Engine (RT20/24): Honda .................... Parts Manual .................................................................... ............. 053-2454 Honda .................... Operators Manual ............................................................ ............. 053-2453 Honda .................... Service (Shop) Manual .................................................... ............. 053-2494

Filters Engine (RT12): Air Filter – Honda (includes Pre-Filter)………………………………………………………….1951752 Engine (RT16): Air Filter – Briggs………………………………………………………………………………….1951478 Air Filter – Briggs (Pre-Cleaner)…………………………………………………………………1951479 Fuel Filter (Honda) …………………... ………………………………………………………….1951480 Engine (RT20/24): Air Filter – (Honda)………………………………………………………………………………..1951534 Oil Filter (Honda)………………………………………………………………………………….1951533 Fuel Filter (Honda)………………………………………………………………………………..195-1536 Hydraulic: Oil Filter Element (_1_-UNF, spin-on) ............................................................................. 155-910

VER.02

ID0288009

165

RT12/RT16/RT20/RT24 Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ............................................ 190-051 O-ring Repair Kit - Field Service (46 different O-rings) .................................................... 190-052

VER.02

ID0288009

166

167

ID0040564

168

ID0135281