Ditch Witch RT10 / RT12 Tractor Parts Manual 053-1344 PDF

RT10/RT12

Parts Manual

Issue 12

053-1344

1

RT10/RT12 ISSUE NO. 12PL-09/19 For Replacement Copy Order P/N 053-1344

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works

This manual contains information concerning the following models: RT10 Tractor and RT12 Tractor

Copyright 2009, 2011, 2012, 2014, 2015, 2016, 2017, 2018, 2019

by The Charles Machine Works, Inc. , Ditch Witch, Roto Witch, and CMW are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY ______________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy July 2019

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse (including, but not limited to, rollover), abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 07

ID0134872

CONTENTS______________________ Decals

RT10 ............................................................ 8 RT12 .......................................................... 10

Engine Components

Air Filter – RT12 Honda ................................ 22 Engine Assembly – RT10............................. 14 Engine Assembly – RT12........................16, 18 Engine Assembly – RT12 Honda ................... 20

Powertrain

Chain Drive & Auger.................................. 28 Hub & Brake .............................................. 26 Tire & Wheel ............................................. 30 Trail Wheel ................................................ 32

Frame Components

Console Tower .......................................... 36 Outboard Bearing...................................... 40 Pivot .......................................................... 38 Pump Cover – RT10 .................................... 42

Control Components

Controls ..................................................... 46

Hydraulics

Chain Motor .............................................. 56 Cylinders – 2” x 1” ....................................... 62 Filter – RT10................................................ 50 Filter – RT12................................................ 52 Lift Hydraulics............................................ 60 Motor ........................................................ 64 Oil Cooler – RT12 ........................................ 54 Schematic .................................................. 66 Wheel Motor ............................................. 58

Electrical

Accessories

Alligator Bit Puller ................................... 122 Alligator Bit Punch................................... 124 Backfill Blade ........................................92, 94 Boom, Grease – Roller ................................ 96 Boom, Grease – Sprocket .......................... 102 Boom, Low Profile Sprocket .................... 100 Boom, Roller.............................................. 98 Boring Attachment .................................... 88 Chain Jaws ............................................... 126 Chain, 35K Alligator/Duratooth .............. 116 Chain, 35K Duratooth – 2P ...................... 114 Chain, 35K Duratooth – 4P ...................... 112 Chain, 35K Shark/Alligator ...................... 120 Chain, 35K Shark/Duratooth ................... 118 Grease Cylinder ....................................... 110 Remote Air – RT10...................................... 90 Restraint Bar ............................................. 82 Single Point Lift – RT10 ............................... 84 Split Boom Assembly, 24” ....................... 104 Split Boom Assembly, 30” ....................... 106 Split Boom Assembly, 36” ....................... 108 Track Assembly, Rigid ............................. 134 Track Assembly, Wheel ........... 128, 130, 132 Track Rotation Stops, Wheel................... 136 Weight ....................................................... 86

Miscellaneous

Bolt/Nut Torque Chart ............................ 140 Filters – RT10 ............................................ 146 Filters – RT12 ............................................ 147 Optional Kits – RT10 ................................. 146 Optional Kits – RT12 ................................. 147 Related Publications – RT10 ..................... 146 Related Publications – RT12 ..................... 147 Replacement O-Ring Chart ..................... 145 Warranty Registration............................. 150

Battery....................................................... 70 Diagram – RT12 .......................................... 76 Fan Harness ............................................... 72 Ignition Harness ........................................ 78 Tach/Hour Meter ...................................... 74

ID0230084

5

6

7

DECALS

8

DECAL LOCATION RT10 15

RESTRAINT BAR 17

12 18

9

8 6 7

2

19

13

4

14

3 5

11

1

12

6

7

10

16 2

10

6

7

ID0228433

9

DECAL LOCATION RT10 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

QTY

270-4538 270-6773 270-1156 275-419 274-208 275-173 274-442 274-318 274-187 270-4520 270-4521 270-4522 270-4523 270-4557 270-4549 270-4703 270-4873 273-058 273-059 270-6406

DESCRIPTION

DECAL KIT - RT10 1 PATENT 2 DANGER, CHAIN & AUGER 1 WARNING NO FLAME 1 FUEL SHUTOFF ALERT 1 FUEL TANK (GASOLINE) 3 LIFT LOCATION 3 TIE DOWN LOCATION 1 DANGER TURNING SHAFT HAZARD ALERT 1 PARKING BRAKE 1 15W-40 OIL CAP 1 CONTROL PANEL 2 RT10 MODEL ID 1 ROTO-WITCH CONTROL VALVE 1 ROTO-WITCH 1 RT10/RT12 OPERATOR INSTRUCTIONS 1 GREASE ZERK 1 DANGER 1.50” X 18” 2 DANGER STRIPE 1.50” X 18” 1 OPERATOR MANUAL REPLACEMENT

REMARKS

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, APPLY TO 3 SIDES.

FOOTNOTES: 1. PART OF ROTO-WITCH KIT 190-1432

10

ID0228433

10

DECAL LOCATION RT12 15

RESTRAINT BAR 19

12 21

16 20 9

8 6 7

2 3

13

4

14

3

5

11

1 17

12

6 7

10 18 2 6

13

7

ID0228434

11

DECAL LOCATION RT12 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

270-4914 270-6773 270-1156 270-6406 274-208 275-173 274-442 274-318 274-187 270-4520 270-4521 270-4522 270-4524 270-4557 270-4549 270-4703 274-081 275-449 270-4873 273-058 275-032 273-059 270-6406

QTY

DESCRIPTION

1 2 1 1 1 3 3 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1

RT12 HONDA SERVICE DECAL KIT PATENT DANGER, CHAIN & AUGER OPERATOR MANUAL REPLACEMENT FUEL SHUTOFF ALERT FUEL TANK (GASOLINE) LIFT LOCATION TIE DOWN LOCATION DANGER TURNING SHAFT HAZARD ALERT PARKING BRAKE 15W-40 OIL CAP CONTROL PANEL RT12 MODEL ID ROTO-WITCH CONTROL VALVE ROTO-WITCH RT10/RT12 OPERATOR INSTRUCTIONS ENGINE STOP DITCH WITCH LOGO PLACARD GREASE ZERK DANGER 1.50” X 18” HAND THROTTLE OPERATION DANGER STRIPE 1.50” X 18” OPERATOR MANUAL REPLACEMENT

REMARKS

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, SEE FOOTNOTE 1.

NOT PART OF KIT, SEE FOOTNOTE 1.

SEE FOOTNOTE 2.

NOT PART OF KIT. SEE FOOTNOTE 2.

NOT PART OF KIT.

FOOTNOTES: 1. PART OF ROTO-WITCH KIT 190-1432 2. USED ON THE HONDA ENGINE ONLY.

13

ID0228434

12

NOTES:

ID0134963

13

ENGINE COMPONENTS

14

ENGINE ASSY

16

RT10

9 12

1

14 7

8

13

3 10

15 8 4 5

11 4

05

6

2

ID0226225

15

ENGINE ASSY RT10

REF PART NO. NUMBER

QTY

1 195-1464 2 150-2330 3 150-2772 4 105-158 5 105-052 6 105-031 7 105-677 8 160-1177 9 300-8766 10 156-982 11 105-117 12 179-909 13 107-661 14 165-923 15 106-621 16 106-541

1 1 1 8 2 2 4 1 1 1 2 4 4 1 4 4

DESCRIPTION

ENGINE (13.0 HP HONDA, ROPE) TANDEM PUMP 6 CC PUMP 8.2CC THROUGH DRIVE CAM WASHER (3/8") BOLT (3/8-NC X 1-1/4") BOLT (3/8-NC X 1") FLG BOLT (3/8-NC X 1-1/4") PUMP MOUNT KIT MOUNT O-RING (-138 D70) WASHER (5/16") SLEEVE (.259" X .475") FLG LKNUT (M10-1.50, PRV TRQ) KEY (1/4 X 2.00) SCREW (M10-1.50 X 45MM, 10.9) FLG SCREW (M6-1.00 X 20MM)

REMARKS

SEE FOOTNOTE 3 SEE FOOTNOTE 2

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1- USE LOCTITE 242 OR EQUIVALENT ON COUPLER SCREWS 2. SEAL REPAIR KIT 9900205-00 3. SEAL REPAIR KIT 500-2301

NOTE:

05

ID0226225

16

ENGINE ASSEMBLY

RT12 BEGINS WITH S/N: CMWRT12XJB0001163

1

16 2

2

15 10 4

11

9 14

3

13 5 7 12

07

6

8

ID0274903

17

ENGINE ASSEMBLY

RT12 BEGINS WITH S/N: CMWRT12XJB0001163 REF PART NO. NUMBER

QTY

1 195-1579 2 160-1177 3 150-2330 4 150-2772 5 105-677 6 105-158 7 105-052 8 105-031 9 106-200 10 106-395 11 156-982 12 105-117 13 107-194 14 105-091 15 106-561 16 165-923

1 1 1 1 3 8 2 2 3 4 1 2 1 1 4 1

DESCRIPTION

ENGINE (16 HP B & S VANGUARD) W/TANK PUMP MOUNT KIT TANDEM PUMP 6 CC PUMP 8.2CC THROUGH DRIVE FLG BOLT (3/8-NC X 1-1/4") CAM WASHER (3/8") BOLT (3/8-NC X 1-1/4") BOLT (3/8-NC X 1") FLG LK SCREW (M8-1.25 X 45MM) WASHER (M8) O-RING (-138 D70) WASHER (5/16") FLG SCREW (M8-1.25 X 50MM) LOCK WASHER (5/16") LOCKNUT (M8-1.25,PRV TRQ,10.9) KEY (1/4 X 2.00)

REMARKS

REFER TO "NOT SHOWN" SECTION, SEE FOOTNOTE 1 & REFER TO "NOT SHOWN" SECTION SEE FOOTNOTE 3 SEE FOOTNOTE 2

NOT SHOWN:

SERVICE PARTS FOR PUMP MOUNT KIT, 160-1177: 160-1193 FLANGED COUPLER (1.000") 160-1194 FLANGED COUPLER (9T .625") 160-1195 SPIDER INSERT SERVICE PARTS FOR ENGINE, 195-1579: 195-1478 AIR FILTER CARTRIDGE 195-1479 AIR FILTER PRE-CLEANER 195-1480 FUEL FILTER 195-1481 FUEL PUMP 195-1482 KEY SWITCH 500-2093 ENGINE OIL FILTER 195-1484 SPARK PLUG 195-1485 STARTER 195-1486 TANG BENDER 215-020 IGNITION KEY 500-2094 STARTER SOLENOID 500-2521 FUEL TANK 500-3267 OIL DIPSTICK

FOOTNOTES:

1. USE LOCTITE 242 OR EQUIVALENT ON COUPLER SCREWS. 2. SEAL REPAIR KIT 9900205-00 3. SEAL REPAIR KIT 500-2301

NOTE:

07

ID0274903

18

ENGINE ASSEMBLY

RT12 ENDS WITH S/N: CMWRT12...0001162

1

16 2

15

2 10 4 9

14

11

13

3 5 6 7 12

15

6

8

ID0223833

19

ENGINE ASSEMBLY

RT12 ENDS WITH S/N: CMWRT12...0001162 REF PART NO. NUMBER

QTY

1 195-1456 2 160-1177 3 150-2330 4 150-2772 5 105-677 6 105-158 7 105-052 8 105-031 9 106-200 10 106-395 11 156-982 12 105-117 13 107-194 14 105-091 15 106-561 16 165-923

1 1 1 1 3 8 2 2 3 4 1 2 1 1 4 1

DESCRIPTION

ENGINE 16 HP W/ FUEL TANK PUMP MOUNT KIT TANDEM PUMP 6 CC PUMP 8.2CC THROUGH DRIVE FLG BOLT (3/8-NC X 1-1/4") CAM WASHER (3/8") BOLT (3/8-NC X 1-1/4") BOLT (3/8-NC X 1") FLG LK SCREW (M8-1.25 X 45MM) WASHER (M8) O-RING (-138 D70) WASHER (5/16") FLG SCREW (M8-1.25 X 50MM) LOCK WASHER (5/16") LOCKNUT (M8-1.25,PRV TRQ,10.9) KEY (1/4 X 2.00)

REMARKS

REFER TO "NOT SHOWN" SECTION, SEE FOOTNOTE 1 & REFER TO "NOT SHOWN" SECTION SEE FOOTNOTE 3 SEE FOOTNOTE 2

NOT SHOWN:

SERVICE PARTS FOR PUMP MOUNT KIT, 160-1177: 160-1193 FLANGED COUPLER (1.000") 160-1194 FLANGED COUPLER (9T .625") 160-1195 SPIDER INSERT SERVICE PARTS FOR ENGINE, 195-1456: 195-1794 AIR FILTER CARTRIDGE 195-1479 AIR FILTER PRE-CLEANER 195-1480 FUEL FILTER 195-1481 FUEL PUMP 195-1482 KEY SWITCH 500-2093 ENGINE OIL FILTER 195-1484 SPARK PLUG 195-1485 STARTER 195-1486 TANG BENDER 215-020 IGNITION KEY 500-2521 FUEL TANK 500-3267 OIL DIPSTICK FOOTNOTES:

1. USE LOCTITE 242 OR EQUIVALENT ON COUPLER SCREWS. 2. SEAL REPAIR KIT 9900205-00 3. SEAL REPAIR KIT 500-2301

NOTE:

15

ID0223833

20

ENGINE ASSY RT12 HONDA

2

26 8

15 23

6

15 13

7 13

9

22 12 16 27 3 1 5 25

18 21

14

28 19

4 21 20 24 10

04

11

17

ID0272539

21

ENGINE ASSY RT12 HONDA REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

1 ENGINE (15 HP HONDA, ELECTRIC) 1 FUEL TANK 1 KEY (1/4 X 2.00) 1 FLG SCREW (M8-1.25 X 50MM) 2 LOCKNUT (M8-1.25,PRV TRQ,10.9) 1 MOUNT 4 SLEEVE (.259" X .475") 4 FLG SCREW (M6-1.00 X 20MM) 1 MUFFLER (HONDA) 5 WASHER (5/16") 4 CAM WASHER (3/8") 1 TANK BRACKET 4 FLG LOCKNUT (M8-1.25) 3 FLG LK SCREW (M8-1.25 X 45MM) 6 FLG LK SCREW (M8-1.25 X 16MM) 2 SPRING CLAMP (3/8") 1 BOLT (3/8-NC X 1") 1 PUMP 8.2CC THROUGH DRIVE 1 TANDEM PUMP 6 CC 3 FLG BOLT (3/8-NC X 1-1/4") 1 PUMP MOUNT KIT 1 TANK SUPPORT 1 STRAP 1 BOLT (3/8-NC X 1-1/4") 2 WASHER (M8) 1 ATTACHMENT PLATE 10 BULK HOSE (3/16") LOW PERM 1 O-RING (-138 D70)

195-1354 195-1577 165-923 107-194 106-561 300-8766 179-909 106-541 195-2270 105-117 105-158 301-1508 106-386 106-200 106-380 110-563 105-031 150-2772 150-2330 105-677 160-1177 301-1567 301-1559 105-052 106-395 301-1305 105-1516 156-982

DESCRIPTION

REMARKS

INCL REF NO.'S 2, 3 & 9, SEE FOOTNOTES 4 & 5. SEE NOT SHOWN FOR S.P.

USE REPLACEMENT GASKET 195-1304

SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 1 SEE FOOTNOTE 6; BEGINS WITH S/N ___________ SEE FOOTNOTE 6; BEGINS WITH S/N ___________

USE 1 AT 10"

NOT SHOWN:

195-1140 195-1305 195-1301 195-1352 195-1303

1 FUEL FILTER 1 SPARK PLUG 1 STARTER, RECOIL (RED) 1 STARTER, RECOIL (BLK) 1 STARTER, ELECTRIC

SEE FOOTNOTE 5 SEE FOOTNOTE 5

FOOTNOTES:

1- USE LOCTITE 242 OR EQUIVALENT ON COUPLER SCREWS 2. SEAL REPAIR KIT 9900205-00 3. SEAL REPAIR KIT 500-2301 4. BEGINS WITH S/N: CMWRT12XCB0000959 (ELECTRIC ENG 195-1354.)

5. BEGINS WITH S/N: CMWRT12XCB0000640, (REMOTE FILTER & BLACK COVER, ENG 195-1353) ENDS WITH S/N: CMWRT12XCB0000639, (ATTACHED FILTER & RED COVER, ENG 195-1143) 6. REPLACES "L" BRACKETS; REQUIRES NEW 301-1508 TANK BRACKET. NOTE:

1. FOR REPOWER ON UNITS WITH SERIA NUMBERS IN FOOTNOTE 4 AND 5, USE KIT 190-1868 (195-1606 ENGINE & 215-1821 FRAME HARNESS)

04

ID0272539

22

AIR FILTER RT12 HONDA

6 1

5

8

7

9

1

10

3 1

4 2

01

ID0279961

23

AIR FILTER RT12 HONDA REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10

195-1157 106-386 106-380 301-1305 105-272 105-1210 195-280 105-117 194-339 106-561

QTY

1 2 2 1 2 2 1 4 1 2

DESCRIPTION

AIR FILTER FLG LOCKNUT (M8-1.25) FLG LK SCREW (M8-1.25 X 16MM) ATTACHMENT PLATE SCREW (M8-1.25 X 30MM, 10.9) WORM CLAMP (1-1/4" TO 2-1/4") ELEMENT (PRIMARY) WASHER (5/16") MOUNTING CLAMP (4.800") LOCKNUT (M8-1.25,PRV TRQ,10.9)

REMARKS

INCLUDES REF NO. 7, SEE NOT SHOWN FOR SERVICE PARTS.

NOT SHOWN:

195-1302

1 AIR FILTER ELEMENT

ENDS WITH S/N: CMWRT12XCB0000639, (ATTACHED FILTER & RED COVER)

FOOTNOTES:

1. USE LOCTITE 242 OR EQUIVALENT ON COUPLER SCREWS

NOTE:

01

ID0279961

24

NOTES:

ID0134963

25

POWERTRAIN

26

HUB AND BRAKE

2 1

8

10

5 14

18 19 11

12

9 8 4 7

16 13

15 3

6 2 5 17

06

ID0223618

27

HUB AND BRAKE REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

QTY

DESCRIPTION

155-572 2 HYD MTR (GEROLER) 20.6 CID 300-4341 2 HUB (MACHINED) 301-1290 1 BRAKE ROTOR 105-286 5 BOLT (3/8-NC X 1-3/4") 105-1192 10 LUG BOLT (7/16-NF X 2 1/4") 300-5985 5 SPACER (.75 X .375 X 1.00) 105-072 1 LOCK WASHER (3/8") 154-421 4 CONNECTOR (06O-10S90) 300-8836 1 BRAKE PIN 300-8835 1 BRAKE HANDLE 117-1018 1 EXT. SPRING (.84 OD X .58 ID X 4.75 LG) 107-360 1 SHLD BLT (1/2" X 5/8"", 3/8-NC) 106-743 9 WASHER (.531", HARDENED) 105-047 1 LOCKNUT (3/8-NC) 107-507 8 SCREW (M12-1.75 X 65MM) 106-709 8 FLG LK NUT (M12-1.75) 105-054 10 LUG NUT (7/16-NF) 106-561 1 LOCKNUT (M8-1.25,PRV TRQ,10.9) 106-992 1 FLG LK SCREW (M8-1.25 X 25MM)

REMARKS

USE SEAL REPAIR KIT 500-510 SEE FOOTNOTE 1 SEE FOOTNOTE 1

TORQUE TO 65 FT-LBS

NOT SHOWN:

FOOTNOTES:

1. REF#'S 2 & 5 ARE INCLUDED IN 650-1103 HUB ASSEMBLY.

NOTE:

06

ID0223618

28

CHAIN DRIVE AND AUGER RT10/12/24 EARLY STYLE PIVOT

15

13

12

10

1

5

9 7

8 11

4 6 3

2

14 EARLIER STYLE SEE FOOTNOTE 2

07

ID0223617

29

CHAIN DRIVE AND AUGER RT10/12/24 EARLY STYLE PIVOT REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

301-1656 107-167 105-073 300-9124 300-0081 301-1657 300-8782 105-1427 106-743 106-685 300-9322 105-518 150-2195 301-0413 150-1336

QTY

1 6 6 6 1 2 1 4 8 4 1 1 1 1 1

DESCRIPTION

DRIVE HUB BOLT (7/16-NC X 2.5", GD 8) LOCK WASHER (7/16") BUSHING 12T SPROCKET MACHINED RETAINER PLATE AUGER SCREW (M12-1.75 X 85MM 10.9) WASHER (.531", HARDENED) LOCKNUT(M12-1.75,PRV TRQ,10.9) BACKUP RING COTTER PIN (.125 X 1.500) HYDRAULIC MOTOR 8.0 CU IN AUGER, LARGE HYDRAULIC MOTOR

REMARKS

USE LOCTITE 242 OR EQUIVALENT, TORQUE TO 75 FT-LBS

STANDARD AUGER. TORQUE TO 75 FT-LBS

NO LONGER USED SEE FOOTNOTE 1 AND 4.

OPTIONAL AUGER: USE WITH LARGE BOOM/CHAIN ON RT20 AND RT24.

11.89 CU IN, USED ON RT20 AND RT24. SEE FOOTNOTE 3 AND 4.

NOT SHOWN:

142-109

1 HEADSHAFT SPROCKET HALF

INCLUDES TWO 10T SPROCKET HALVES.

FOOTNOTES:

1. SEAL REPAIR KIT 500-1428 2. SEE PIVOT PARTS PAGE IDO254146 FOR COMPONENTS. 3. USE SEAL KIT 500-1428; SHAFT & BEARING KIT 500-2399 4. USE 105-1646 IN PLACE OF NUT ON MOTOR. TORQUE TO 225 FT-LB. USE LOCTITE 277 OR EQUIVALENT.

NOTE:

07

ID0223617

30

TIRE AND WHEEL

8

10

9 7

11

10

12

2 1 5 6

4

3 03

ID0228582

31

TIRE AND WHEEL REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12

1 TIRE (18 X 9.5 X 8 B/L, 4PLY TL) 1 WHEEL (8.00 X 6.937, W.5) 1 TIRE (18 X 8.50-8, B4TL, NHS) 1 WHEEL (8 X 5.375 WD, W15) 1 VALVE STEM (.453", SNAP-IN) 1 VALVE CAP (.305"-32) 10 LUG NUT (7/16-NF) 1 TIRE & WHEEL (RIGHT) 1 TIRE & WHEEL (LEFT) 2 TIRE & WHEEL (18 X 8.5 X 8, TURF TAMER) 1 POLYURETHANE FILL 18 X 9.5-8 BL RIGHT 1 POLYURETHANE FILL 18 X 9.5-8 BL LEFT

205-477 205-476 205-144 205-227 205-164 205-165 105-054 205-479 205-480 205-861 205-1156 205-1157

DESCRIPTION

REMARKS

REQUIRES 5 PER HUB, SEE FOOTNOTE 2 INCLUDES REF #'S 1,2,5 & 6 INCLUDES REF #'S 1,2,5 & 6 INCLUDES REF #'S 3-6 SEE DEALER FOR REQUIRED USE, SEE FOOTNOTE 1 SEE DEALER FOR REQUIRED USE, SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. THERE ARE NO SERVICE PARTS AVAILABLE FOR URETHANE FILLED TIRE ASSEMBLIES. THEY MUST BE PURCHASED AS DIRECTIONAL ASSEMBLIES ONLY. 2. TORQUE TO 65 FT-LBS

NOTE:

03

ID0228582

32

TRAIL WHEEL

5

2

4 3

04

1

ID0226631

33

TRAIL WHEEL REF PART NO. NUMBER

1 2 3 4 5

205-1128 115-003 105-071 105-065 184-975

QTY

1 1 1 1 1

DESCRIPTION

SOILD TIRE 13 X 5.0-6 ZERK (1/4-NF, STR) WASHER (1/2") LOCKNUT (1/2-NC) AXLE PIN

REMARKS

INCLUDES ZERK AND BEARINGS, SEE NOT SHOWN FOR SERVICE PARTS.

NOT SHOWN:

125-1100 2 BEARING, DOUBLE GROOVE SEAL (3/4 X 1-3/4)

FOOTNOTES:

NOTE:

04

ID0226631

34

NOTES:

ID0134963

35

FRAME COMPONENTS

36

CONSOLE TOWER RT10/12/24

21 20 9

19 12

1

6

14 9

11

15

3

8 4

17

2 9

8

16

12 23 22

11 10 5 18

7 12 9

13

04

ID0223785

37

CONSOLE TOWER RT10/12/24 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

1 CONSOLE 1 TOWER MOUNT 1 TOWER SIDE 1 BACK PLATE 1 MANUAL MOUNT 1 FRONT CONSOLE COVER 2 CLIP NUT M8-1.25, LONG, WIDE 6 FLG LOCKNUT (M10-1.50) 12 FLG LK SCREW (M8-1.25 X 25MM) 2 FLG LK SCREW (M8-1.25 X 16MM) 11 FLG LOCKNUT (M8-1.25) 6 FLG SCREW (M10-1.50 X 25MM) 2 WORM CLAMP (3-1/4" TO 4-1/8"") 3 FLG LK SCREW (M10-1.50 X 30MM) 1 SIGHT GLASS (2") 1 REAR PANEL CONSOLE 1 GROMMET (1 1/2) .188 THK. 1 MANUAL COMPARTMENT 1 CONTROL MOUNT STD. 2 LOCKNUT (M6-1.00,PRV TRQ,NLK) 2 FLG SCREW (M6-1.00 X 16MM) 1 COVER 1 SWITCH

300-8808 300-8829 300-8828 300-8833 300-8899 300-8825 107-687 106-387 106-381 106-380 106-386 106-724 110-367 106-383 116-218 300-8839 105-1392 362-1227 301-0432 106-237 106-712 362-823 217-854

DESCRIPTION

REMARKS

USED ON RT24 ONLY USED ON RT24 ONLY USED ON RT24 ONLY USED ON RT10, RT12 BRIGGS AND RT24 USED ON RT12 HONDA ONLY

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0223785

38

PIVOT

RT10/12/24 EARLIER STYLE

15

16

17 13 11 10 12

4 1 2 14

9 3 7 5

8

9 6

CURRENT PRODUCTION SEE FOOTNOTE 3

05

ID0254146

39

PIVOT

RT10/12/24 EARLIER STYLE REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

190-1654 301-0397 362-1525 300-3386 125-412 107-594 105-1427 107-507 105-839 106-743 106-387 106-709 106-685 115-499 301-1807 115-003 116-468 116-258

QTY

DESCRIPTION

DUAL REMOTE GREASE KIT 1 PIVOT ASSEMBLY 1 WEAR STRIP 1 BOOM PIVOT RETAINER 1 BRONZE BUSHING 2 WASHER (.406", HARDENED) 4 SCREW (M12-1.75 X 85MM 10.9) 2 SCREW (M12-1.75 X 65MM) 2 SCREW (M10-1.50 X 55MM) 12 WASHER (.531", HARDENED) 2 FLG LOCKNUT (M10-1.50) 2 FLG LK NUT (M12-1.75) 4 LOCKNUT(M12-1.75,PRV TRQ,10.9) 1 KLIP RING (1.000") 1 BOOM BEARING PLATE 2 ZERK (1/4-NF, STR) 1 LUBE HOSE (02N-24") 1 LUBE HOSE (02N-18")

REMARKS

INCLUDES REF NO.'S 2 & 14-17. SEE FOOTNOTE 2 FOR S/N BREAK. OBSOLETE, SEE FOOTNOTE 3

USE LOCTITE 277 OR EQUIVALENT. DO NOT OVERTIGHTEN. USE LOCTITE 277 OR EQUIVALENT. DO NOT OVERTIGHTEN. SEE FN 1.

NOT SHOWN:

105-283

LOCKNUT (02NF)

SERVICE PART FOR LUBE HOSE

FOOTNOTES:

1. EARLY MODELS MAY BENEFIT FROM 115-249 STREET ELBOW. INSTALL ROTATED APX. 30 DEG UPWARD TOWARDS THE TOWER. 2. BEGINS WITH S/N: CMWRT10XCB0000303; CMWRT12XEB0000670; CMWRT24XLB0000250 3. SEE PIVOT PARTS PAGE IDO274202 FOR CURRENT STYLE COMPONENTS.

NOTE:

05

ID0254146

40

OUTBOARD BEARING

8

1

9 7

3

6

4 10

5 2

02

ID0223620

41

OUTBOARD BEARING REF PART NO. NUMBER

QTY

1 300-8763 2 125-053 3 110-396 4 110-395 5 105-249 6 115-003 7 105-834 8 106-387 9 106-383 10 125-708

1 1 1 1 3 1 3 2 2 1

DESCRIPTION

REMARKS

AUGER SUPPORT BALL BEARING (1.250") FLANGETTE (3-BOLT, L/ZERK) FLANGETTE (3-BOLT, W/ZERK) CARRIAGE BOLT(3/8-NC X 1-1/4") ZERK (1/4-NF, STR) FLG LOCKNUT (3/8-NC) FLG LOCKNUT (M10-1.50) FLG LK SCREW (M10-1.50 X 30MM) LOCK COLLAR (1.250")

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0223620

42

PUMP COVER RT10

2

3

1

01

ID0226232

43

PUMP COVER RT10

REF PART NO. NUMBER

1 300-8902 2 106-400 3 300-8834

QTY

DESCRIPTION

REMARKS

2 SPACER (.625 X .375 X 2.25) 2 BOLT (3/8-NC X 2-3/4", GD8) 1 PUMP COVER

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0226232

44

NOTES:

ID0134963

45

CONTROL COMPONENTS

46

CONTROLS

1 15 3

21 24

14

2

20

20 7 11

10

4 9

13

8

16 19 12

6

9

7

5 11

22 26 18

25

23

02

17

ID0223863

47

CONTROLS REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

300-8808 300-8799 300-8800 300-8790 300-8830 125-403 125-548 105-834 106-070 117-186 105-835 300-8927 300-8941 105-1400 105-1401 105-047 106-386 106-991 105-1412 107-095 106-989 105-115 107-110 105-117 300-8832 105-1380

QTY

1 1 1 2 1 4 2 4 2 1 4 1 1 1 1 2 4 4 2 2 1 2 2 1 2 2

DESCRIPTION

CONSOLE AUX HANDLE ATT. HANDLE GROUND DRIVE LEVER PIVOT PIN BRONZE BUSHING (.625") FLANGE BEARING FLG LOCKNUT (3/8-NC) SHLD BLT (1/2" X 3/8", 3/8-NC) EXTENSION SPRING (3.625") CARRIAGE BOLT (3/8-NC X 3/4") CONTROL ROD LINKAGE CONTROL ROD LINKAGE FOAM GRIP (BLACK, 7", 3/8 ID) FOAM GRIP (BLACK, 3", 3/8 ID) LOCKNUT (3/8-NC) FLG LOCKNUT (M8-1.25) FLG LK SCREW (M8-1.25 X 20MM) WASHER (NYLON, .515) FLG SCREW (M8-1.25 X 16MM) FLG LK SCREW (M8-1.25 X 35MM) JAM NUT (5/16-NF) LOCKNUT (5/16-NF, NYL INSERT) WASHER (5/16") PUMP SWASH BALL JOINT 5/16 MALE W/ STUD (MPM-5S)

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1- FOR RT10 AND RT12 HONDA USE P/N 301-1279, HONDA PUMP SWASH

NOTE:

02

ID0223863

48

NOTES:

ID0134963

49

HYDRAULICS

50

FILTER HYDRAULICS RT10

26

27

17 21

19 20

22

16 15

23

18

14

28

24

25 12

13

11

10 9

7 8

29

6 5

4

3

2 1

04

ID0226263

51

FILTER HYDRAULICS RT10

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

1 TANK STRAINER (100MESH -16HB) 6 WORM CLAMP (1" TO 1-3/4") 28 BULK HOSE (1", SOLD PER FT) 1 MAGNET 4 BULK EDGE (1/4", SOLD PER 1") 28 BULK HOSE (3/4", SOLD PER FT) 1 S/O COUPLER (12S-12H) 1 FILTER ELEMENT (1-UNF) 1 FILTER HEAD (12SF-12SF) 1 S/O COUPLER (12S-12H45) 2 FLG LK SCREW (M8-1.25 X 25MM) 1 FILTER MOUNT 2 FLG LOCKNUT (M8-1.25) 2 FLG LK BOLT (1/4-NC X 1/2") 1 ABRASION SLEEVE (1.25" X 35"") 1 HOSE (08OFX45-28"-3000) 1 CONNECTOR (08S-08O90) 9 BULK HOSE (3/4", SOLD PER FT) 1 S/O COUPLER (O8S-12H90) 1 UNION RUN TEE (08OFX-08O-08O) 1 QDC ADAPTER (02-08OFX) 1 CONNECTOR (08O-10S45) 10 BULK HOSE (3/8", SOLD PER FT) 4 WORM CLAMP (1/4" TO 5/8") 2 ELBOW (-06S X -06H90) 1 ABRASION SLEEVE (1.59" X 26"") 1 S/O COUPLER (12S-16H90) 1 BREATHER -12SAE 5 BULK HOSE (3/8", SOLD PER FT)

150-2925 111-011 116-460 110-130 115-704 116-636 150-2028 155-910 159-386 155-196 106-381 300-8831 106-386 105-836 117-397 154-930 154-235 116-636 156-960 154-266 159-158 154-264 116-881 110-249 159-916 117-224 155-146 150-2337 116-881

DESCRIPTION

REMARKS

USE 28" INSTALLED INSIDE HYD TANK USE 4" USE 28"

USE 8 1/2"

USE 10"

USE 5"

NOT SHOWN:

255-1011

POWER UP "HYDRA MAX"

SEE FOOTNOTE 1

FOOTNOTES:

1- USE (1) 16 OZ BOTTLE ALONG WITH 8 GAL. OF DEO AT EACH RECOMMENDED OIL CHANGE.

NOTE:

1. SEE O-RING CHART 800-301, IN BACK OF BOOK, FOR O-RING REPLACEMENT

04

ID0226263

52

FILTER HYDRAULICS RT12

1 20 3 4 5 6 4

2

7

18 4

8 21 4

9 10 12

4

12

19 22

4

23

11

13 24 16

15

14

17

25 26 27

28 25

29 30 31 4

33 32

05

ID0223909

53

FILTER HYDRAULICS RT12

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

1 CONNECTOR (08S-08O90) 1 ABRASION SLEEVE (1.25" X 35"") 1 S/O COUPLER (O8S-12H90) 8 WORM CLAMP (1" TO 1-3/4") 9 BULK HOSE (3/4", SOLD PER FT) 2 FLG LK BOLT (1/4-NC X 1/2") 1 FILTER MOUNT 2 FLG LOCKNUT (M8-1.25) 2 FLG LK SCREW (M8-1.25 X 25MM) 1 S/O COUPLER (12S-12H) 1 QDC ADAPTER (02-08OFX) 2 S/O COUPLER (12S-12H45) 1 FILTER HEAD (12SF-12SF) 1 FILTER ELEMENT (1-UNF) 1 HOSE (08OFX45-28"-3000) 1 UNION RUN TEE (08OFX-08O-08O) 1 CONNECTOR (08O-10S45) 20 BULK HOSE (3/4", SOLD PER FT) 1 S/O COUPLER (12S-12H90) 1 OIL COOLER W/ FAN 30 BULK HOSE (3/4", SOLD PER FT) 28 BULK HOSE (1", SOLD PER FT) 1 S/O COUPLER (12S-16H90) 1 BREATHER -12SAE 4 WORM CLAMP (1/4" TO 5/8") 2 ELBOW (-06S X -06H90) 5 BULK HOSE (3/8", SOLD PER FT) 10 BULK HOSE (3/8", SOLD PER FT) 4 BULK EDGE (1/4", SOLD PER 1") 1 MAGNET 1 ABRASION SLEEVE (1.59" X 26"") 1 TANK STRAINER (100MESH -16HB) 1 ZERK (02N)

154-235 117-397 156-960 111-011 116-636 105-836 300-8831 106-386 106-381 150-2028 159-158 155-196 159-386 155-910 154-930 154-266 154-264 116-636 155-174 195-1051 116-636 116-460 155-146 150-2337 110-249 159-916 116-881 116-881 115-704 110-130 117-224 150-2925 115-001

DESCRIPTION

REMARKS

USE 8 1/2"

ONE INCLUDED WITH OIL COOLER (195-1051)

USE 20" USE 30" USE 28"

USE 5" USE 10" USE 4" INSTALLED INSIDE HYD TANK

NOT SHOWN:

255-1011

POWER UP "HYDRA MAX"

SEE FOOTNOTE 1

FOOTNOTES:

1- USE (1) 16oz BOTTLE ALONG WITH 8 GAL. DEO PER RECOMMENDED OIL CHANGE.

NOTE:

1. SEE O-RING CHART 800-301, IN BACK OF BOOK, FOR O-RING REPLACEMENT

05

ID0223909

54

OIL COOLER RT12/24

1 5 2

6

6

7

6

3

7

7 6 8

4 7

7 8

7 8

03

ID0223859

55

OIL COOLER RT12/24

REF PART NO. NUMBER

QTY

1 300-8925 2 195-1051 3 300-8923 4 300-8924 5 106-162 6 106-386 7 106-724 8 106-387

1 COOLER MOUNT 1 OIL COOLER W/ FAN 1 COOLER SUPPORT 1 COOLER SUPPORT 4 FLG SCREW (M8-1.25 X 20MM, GD8) 3 FLG LOCKNUT (M8-1.25) 10 FLG SCREW (M10-1.50 X 25MM) 10 FLG LOCKNUT (M10-1.50)

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0223859

56

CHAIN MOTOR HYDRAULICS

7

9

9 8

3

4

8 3 5 6

2

1

08

ID0223946

57

CHAIN MOTOR HYDRAULICS REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

150-1336 150-2195 515-303 117-657 154-322 154-279 154-256 515-303 154-246

QTY

1 1 1 1 1 1 1 1 2

DESCRIPTION

HYDRAULIC MOTOR HYDRAULIC MOTOR 8.0 CU IN HOSE (08OFX90-58"-3000) ABRASION SLEEVE (1.59" X 54") CONNECTOR (08O-10S90) CONNECTOR (08O-10S) UNION (08O-08OFX90) HOSE (08OFX90-58"-3000) CONNECTOR (06S-08O)

REMARKS

USED ON RT20 AND RT24, SEE FOOTNOTE 1 AND 2.

USED ON RT10/12/16 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. USE SEAL KIT 500-1428; SHAFT & BEARING KIT 500-2399 2. USE 105-1646 IN PLACE OF NUT ON MOTOR. TORQUE TO 225 FT-LB. USE LOCTITE 277 OR EQUIVALENT.

NOTE:

1. SEE O-RING CHART 800-301, IN BACK OF BOOK, FOR O-RING REPLACEMENT

08

ID0223946

58

WHEEL MOTOR HYDRAULICS

4 5 6 6

5

2 3

5 5 6

6

1

01

ID0226227

59

WHEEL MOTOR HYDRAULICS REF PART NO. NUMBER

1 2 3 4 5 6

154-421 117-224 117-679 154-221 155-485 515-221

QTY

4 1 1 4 2 2

DESCRIPTION

REMARKS

CONNECTOR (06O-10S90) ABRASION SLEEVE (1.59" X 26"") ABRASION SLEEVE (1.59" X 32") CONNECTOR (06S-06O) HOSE (06OFX90L-31"-3000) HOSE (06OFX90S-28"-3000)

NOT SHOWN:

FOOTNOTES:

NOTE:

1. SEE O-RING CHART 800-301, IN BACK OF BOOK, FOR O-RING REPLACEMENT

01

ID0226227

60

LIFT HYDRAULICS

1 17 2 3

16

14

15

6

20 5 11

19

7 4

12 13

9 18

8 10

06

ID0223442

61

LIFT HYDRAULICS REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

150-2335 154-226 154-387 515-729 154-653 115-737 154-252 154-278 151-031 125-412 125-800 300-8837 106-724 106-330 106-395 105-117 106-386 107-661 362-1751 362-1752

QTY

1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 9 3 1 1 1

DESCRIPTION

HYDRAULIC 2 SPOOL W/LOCKOUT CONNECTOR (04O-06S90) CONNECTOR (04O-06S90, ORF) HOSE (04OFX90-52"-3000) HOSE (04OFX-40"-3000) ABRASION SLEEVE (1.59" X 40") CONNECTOR (04S-04O90) CONNECTOR (04S-04O) CYL (2.0 X 1.0 X 8.0) BRONZE BUSHING COMPOSITION BUSHING (1") TAB PIN (1 X 6.72) FLG SCREW (M10-1.50 X 25MM) SCREW (M8-1.25 X 70MM) WASHER (M8) WASHER (5/16") FLG LOCKNUT (M8-1.25) FLG LKNUT (M10-1.50, PRV TRQ) SPACER - LONG SPACER - SHORT

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. SEAL REPAIR KIT FVL1EXP61002-U

NOTE:

1. SEE O-RING CHART 300-301, IN BACK OF BOOK, FOR O-RING REPLACEMENT

06

ID0223442

62

HYDRAULIC CYLINDERS (2.0" X 1.0")

1

6 11

13

12 5

7

4 8

9 3 10 2

04

ID0015823

63

HYDRAULIC CYLINDERS (2.0" X 1.0") REF PART NO. NUMBER

QTY

DESCRIPTION

1 2

151-094 152-029 153-007 149-667 149-761 149-728 151-027 150-282 150-414 151-038 150-290 150-421 151-039 150-291 150-422 151-044 150-294 150-424 151-031 150-285 150-417 151-076 152-017 150-444 149-668 150-286 149-729

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

CYL (2.0 X 1.0 X 2.0) CYLINDER BARREL (2.0 X 2.0) CYLINDER ROD (1.00 X 2.0) CYL (2.0 X 1.0 X 2.5) CYLINDER BARREL (2.0 X 2.5) CYLINDER ROD (1.00 X 2.5) CYL (2.0 X 1.0 X 3.0) CYLINDER BARREL (2.0 X 3.0) CYLINDER ROD (1.00 X 3.0) CYL (2.0 X 1.0 X 4.0) CYLINDER BARREL (2.0 X 4.0) CYLINDER ROD (1.00 X 4.0) CYL (2.0 X 1.0 X 5.0) CYLINDER BARREL (2.0 X 5.0) CYLINDER ROD (1.00 X 5.0) CYL (2.0 X 1.0 X 6.0) CYLINDER BARREL (2.0 X 6.0) CYLINDER ROD (1.00 X 6.0) CYL (2.0 X 1.0 X 8.0) CYLINDER BARREL (2.0 X 8.0) CYLINDER ROD (1.00 X 8.0) CYL (2.0 X 1.0 X 10.0) CYLINDER BARREL (2.0 X 10.0) CYLINDER ROD (1.00 X 10.0) CYL (2.0 X 1.0 X 12.0) CYLINDER BARREL (2.0 X 12.0) CYLINDER ROD (1.00 X 12.0)

3 4 5 6 7 8 9 10 11 12 13

150-772 150-778 150-775 106-096 157-022 155-732 157-540 157-537 125-774 157-534 157-018

1 1 1 1 1 1 1 1 1 1 1

CYLINDER HEAD (2.0 X 1.00) LOCK RING (2.0) CYLINDER PISTON (2.0 X 1.00) FLG BOLT (1/2-NC X 1-3/4",GD8) O-RING (224 D90) BACKUP RING (224 D90) U-SEAL (1.000") WIPER SEAL (1.000") WEAR RING BACKUP RING (131 D90) O-RING (131 D90)

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

REMARKS

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

.

SEE FOOTNOTE 3

NOT SHOWN:

259-100 259-235 259-239 259-241 259-188

U-SEAL INSTALLER (1" - 1.499") 1.00 ROD WIPER TOOL WIPER/SEAL INSTALLER (2") PISTON INSTALLER (2") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. REF. #1 & #2 ARE SPECIFIC TO EACH CYLINDER, REF. #3 THRU #13 ARE COMMON FOR ALL THE ABOVE LISTED CYLINDERS 2. SEAL REPAIR KIT P/N: 190-165 3. APPLY LOCTITE 277 OR EQUIVALENT, TORQUE TO 90-100 FT-LBS

NOTE:

04

ID0015823

64

HYDRAULIC MOTOR

TAPERED KEYED SHAFT 1-1/4"

1

3

4 2

1

5

1

6

09

ID0051772

65

HYDRAULIC MOTOR

TAPERED KEYED SHAFT 1-1/4" REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

QTY

150-6055 155-580 153-280 500-347 1 155-771 3 155-760 1 165-915 1 105-418 1 105-501 1

DESCRIPTION

REMARKS

HYDRAULIC MOTOR HYDRAULIC MOTOR HYDRAULIC MOTOR SEAL REPAIR KIT O-RING (011 D70) O-RING (904 D90) KEY (5/16" X 1") LOCKNUT (1-20 NEF) COTTER PIN (1/8" X 2")

INCL REF NO.'S 2 THRU 6, SEE FOOTNOTES 1, 4 & 5 INCL REF NO.'S 1 THRU 5, SEE FOOTNOTES 2 AND 3 INCL REF NO.'S 1 THRU 5, SEE FOOTNOTE 2 INCL REF NO.'S 2 AND 3, SEE FOOTNOTE 4

NOT SHOWN:

FOOTNOTES:

1. USED ON ROTO WITCH II BORING UNITS. 2. USED ON ROTO WITCH 111 AND 1V BORING UNITS. 3. SHAFT AND BEARING KIT- 500-1469 4. FOR OLD STYLE HYD MOTOR 155-579, USE SEAL KIT 500-347 FOR MOTOR VERSION 002, 003, 004 & 005.

SEAL KIT 500-658 IS TO BE USED WITH VERSION 006 MOTORS. 5. HYD. MOTOR 150-6055 BEGINS WITH S/N: CMW_______, USE SEAL KIT 500-3733 NOTE:

09

ID0051772

66

HYDRAULIC SCHEMATIC RT10/12/24

6 7 5 -BB-BB-AAA

B

8

OPTIONAL BORING ATTACHMENT -AA-

A

B

4

9

10

T P

M 15 PSI

220 Bar

FILTER

T1

COOLER RT12/24 ONLY

1

160 Bar

160 Bar

0 CW

2

160 Bar 160 Bar

3

3

GROUND DRIVE LEFT

GROUND DRIVE RIGHT

3 PSI

12

13 11

02

ID0229338

67

HYDRAULIC SCHEMATIC RT10/12/24 Ref. # Component 0 1

2 3 4 5 6 7 8 9 10 11 12 13

Notes

Engine

3600 RPM Each Loop Displacement: 0.366 in3/rev (6 cc) Tandem Hydrostat Ground Drive Single Charge Pump Displacement: 0.19 in3/rev (3.1 cc) Pump Fwd/Rev Relief: 2320 psi (160 bar) See Note 1 Loop Bypass Valve - 2 Turns Max Attachment Pump RT10/12 Displacement: 0.50 in3/rev (8.2 cc) Attachment Pump RT24 Displacement: 0.84 in3/rev (13.8 cc) Ground Drive Motor 20.6 in3/ rev (337 cc) Attachment Valve Relief Valve, Test Port, T1: 3200psi (220 bar) See Note 2 Lift Cylinder 2" x 1" x 8" Chain & Auger Motor RT10/12 8.0 in3/ rev (131 cc) Chain & Auger Motor RT24 11.9in³/rev (195cc) Boring Attachment Motor 18.71 in3/ rev (306.6 cc) Selector Valve Optional with Boring Attachment Hydraulic Filter w/ Bypass Beta 38 = 200; Beta14= 2, Filter w/ 15 psi (1.0 bar) Bypass Oil Cooler w/ Fan RT12 & RT24 ONLY Hydraulic Reservoir Reservoir Capacity: 8 gal (30.3L) Breather w/ Bypass 3 psi Bypass Suction Strainer 100 Mesh

Notes: Bring hydraulic temperature up to 130°F before chec king pressures.

Do not run attachment or ground drive functions over relief for more than 7 seconds at a time.

Ground Drive Pressures: Note 1 At very low engine speed, position unit up against a wall or other firm, solid object that is secured from movement. Increase engine speed to 3600rpm and engage ground drive control lever forward.

Note 2

02

Attachment Pressure: Actuate attachment cylinder to deadhead position forcing pump over relief.

ID0229338

68

NOTES:

ID0134963

69

ELECTRICAL

70

BATTERY

4 5 2

3

11 12 10 10 13

11 14

7

6

7

8 8 8

7 1

03

9

ID0223798

71

BATTERY REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

301-0438 300-4262 300-4334 195-339 105-095 300-8842 106-387 106-724 106-380 106-161 106-385 215-1199 215-1521 215-256

QTY

1 1 2 2 2 1 3 3 1 2 2 1 1 1

DESCRIPTION

BATTERY MOUNT BATTERY HOLD DOWN J-HOOK (PLATED) WING NUT (1/4-NC) WASHER (1/4") BATTERY MOUNT FLG LOCKNUT (M10-1.50) FLG SCREW (M10-1.50 X 25MM) FLG LK SCREW (M8-1.25 X 16MM) FLG SCREW (M6-1.00 X 20MM) FLG LOCKNUT (M6-1.00) NEG BAT CABLE (6 GA X 22", BLK) POSITIVE BATT. CABLE (6 GA. X 30", RED) BATTERY (12V, 200 AMP)

REMARKS

USED ON RT24 ONLY

USED ON RT12 ONLY

RT12 ONLY. SEE "NOT SHOWN" FOR RT24

NOT SHOWN:

213-270

BATTERY (12V, 340 CCA), RT24 ONLY

FOOTNOTES:

NOTE:

03

ID0223798

72

FAN HARNESS RT16

CAP FMS Pos COL

LBL

1

RED/WHT

2

RED

2

3

BLK

1

4

CP

-

FMS 4 3

1 2

15A

FAN- FUSE FAN- FUSE

GROUND B

A

GROUND

Pos COL

LBL

A

RED

2

B

RED/BLU 3

Pos COL LBL 1

BLK 1

FAN A B

ENGINE CONNECTION 1-1

ENGINE CONNECTION 1-1 Pos

COL

LBL

1

RED

2

FAN Pos COL

ENGINE CONNECTION 1

ENGINE CONNECTION 1 Pos

COL

LBL

1

RED

2

LBL

A

RED/BLU 3

B

BLK

1

1

FUSE HLDR GPS-POWER GPS-POWER Pos COL 1

03

RED/WHT

FUSE 2 2A

ID0228150

73

FAN HARNESS RT16

REF PART NO. NUMBER

QTY

DESCRIPTION

1

1

FAN HARNESS

215-1516

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0228150

74

TACH/HOUR METER

2

1 3

03

ID0228824

75

TACH/HOUR METER REF PART NO. NUMBER

1 2 3

190-1790 215-1863 107-859 107-820

QTY

DESCRIPTION

TACHOMETER/HOUR METER KIT 1 TACHOMETER/HOURMETER 2 NUT, LOCK, #6-32, NYLON INSERT 2 SCREW PAN 6-32 X 9/16 PHIL SST

REMARKS

INCL. REF. 1-3; SUPERSEEDS 190-1431 SUPERSEEDS 214-519

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0228824

76

ELECTRICAL DIAGRAM RT12 FRAME HARNESS THROTTLE SWITCH 3

2

1 8

6

5

4 7

LT GRN 16

YEL 16

TO GROUND GRN/ORG 16 CAVITY PLUG GRA 14

GRA 14

BLK (1)

TO ENGINE

TO ENGINE

GRN/ORG 16

YEL 16 CAVITY PLUG

CAVITY PLUG

LT GRN 16

BLK (1)

TO HOURMETER

-A-

B

BLK (1)

TO FAN

A

MAIN FUSE

ORG/GRN (3)

ORG/GRN (3)

ORG/GRN (3)

A B

CAP

ORG/BLU (2)

ORG/BLU (2) 1 2

-A-

4 3

TO REGULATOR

1

BLK (1)

GRA 14

GRA 14

1

TO CAPACITOR

2

BLK (1)

ORG/GRN (3)

01

ID0258368

77

ELECTRICAL DIAGRAM RT12 FRAME HARNESS REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1

1

RT12 FRAME HARNESS

USE ON HONDA ENGINE

215-1620

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0258368

78

ELECTRICAL DIAGRAM

KEY SWITCH

IGNITION HARNESS

ORG 16

BRN 16

RED/WHT 16

BLK/RED 16

1

ORG 16 BRN 16

BLK/RED 16

RED/WHT 16

CAVITY PLUG CAVITY PLUG

TO ENGINE

01

ID0258405

79

ELECTRICAL DIAGRAM IGNITION HARNESS REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1.

1

IGNITION HARNESS

USE ON HONDA ENGINE

215-1621

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0258405

80

NOTES:

ID0134963

81

ACCESSORIES

82

RESTRAINT BAR 2

3

4 9

5

2

8

7

5

10

1 6

11

11 13

16

16 20 19 21 14

19

17

18 12

19 15

05

ID0226576

83

RESTRAINT BAR REF PART NO. NUMBER

QTY

100-180 300-8767 106-381 300-9123 300-6602 106-386 106-632 300-8826 106-584 300-9321 141-318 106-709 141-134 300-4647 141-289 141-287 141-288 320-425 105-279 105-065 107-262 116-709

1 7 1 1 6 2 2 4 1 1 6 1 1 2 1 2 1 2 6 4 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

DESCRIPTION

MECHANICAL CLEANER CONVERSION KIT BRACKET FLG LK SCREW (M8-1.25 X 25MM) SPOILS FLAP CLAMP BAR FLG LOCKNUT (M8-1.25) FLG LK SCR (M12-1.75X35MM,SER) CLAMP BAR SCREW (M12-1.75 X 100MM) BACKUP STRAP RESTRAINT BAR FLG LK NUT (M12-1.75) CLEANER SHOE (6") CLEANER BAR REAR LINK SHOE BEAM FRONT LINK GRAB HANDLE CARRIAGE BOLT (1/2-NCX3.00") LOCKNUT (1/2-NC) LK BOLT (1/2-NC X 3-1/2",GD8) EXTENSION SPRING

REMARKS

INCL'S REF. NO.'S 14 THRU 21

SEE FOOTNOTE 3 SEE FOOTNOTE 1 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. CLEANER SHOE OPTIONS: 4" 141-290, 6" 141-134 & 8" 141-135.

2. CLEANER BAR OPTIONS: 24" 300-4647, 30" 300-4649, 36" 300-4651, & 48" 300-4653.

3. RESTRAINT BAR OPTIONS: 24" DEPTH 141-318, 30 & 36" DEPTH 141-337 & 48" DEPTH 141-156.

NOTE:

05

ID0226576

84

SINGLE POINT LIFT RT10

1

3

2 2

3

01

ID0227286

85

SINGLE POINT LIFT RT10

REF PART NO. NUMBER

1 2 3

300-8827 106-387 107-001

QTY

DESCRIPTION

REMARKS

1 LIFT MOUNT 4 FLG LOCKNUT (M10-1.50) 4 FLG LK SCREW (M10-1.50 X 25MM)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0227286

86

WEIGHT

1 5

7

3

8

4

9

6

2

05

ID0226449

87

WEIGHT REF PART NO. NUMBER

QTY

1 300-8829 2 300-8828 3 300-8765 4 106-580 5 106-709 6 105-833 7 300-8764 8 105-1422 9 105-065

1 1 1 1 1 1 2 1 1

DESCRIPTION

REMARKS

TOWER MOUNT TOWER SIDE SPACER SCREW (M12-1.75 X 180MM) FLG LK NUT (M12-1.75) FLG LOCKNUT (1/2-NC) WEIGHT (CAST) BOLT (1/2-NC X 7, GD 5, FT) LOCKNUT (1/2-NC)

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0226449

88

BORING ATTACHMENT RT12/16

16 18 17

31

1

19

14

15 5

23

TO CHAIN DRIVE MOTOR

30 9

5 20

7 22 8

3

6 3

11 13

4

25

10 2 24

12

21 26

32

27 29

29

06

28

ID0227054

89

BORING ATTACHMENT RT12/16

REF PART NO. NUMBER

QTY

158-510 150-6055 154-279 300-8955 154-749 154-716 159-999 117-265 154-235 300-8956 107-565 106-709 110-228 154-233 154-256 106-628 106-390 106-387 154-284 117-794 307-639 110-031 110-030 351-219 105-082 105-833 182-092 160-1059 180-723 110-248 154-246 118-097

1 1 2 1 2 1 1 1 3 1 4 3 1 1 1 2 2 1 2 1 1 1 2 1 2 2 1 1 1 2 2 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

DESCRIPTION

HYD SELECTOR VALVE MOTOR, HYDRAULIC - 315CC CONNECTOR (08O-10S) ROTOWITCH MOUNT HOSE (08OFX90S-18"-3000) HOSE (08OFX90-48"-3000) HOSE (08OFX90M-50"-3000) ABRASION SLEEVE (1.75" X 50") CONNECTOR (08S-08O90) MOUNT FLG LK SCREW (M12-1.75 X 40MM) FLG LK NUT (M12-1.75) LYNCH PIN (7/16" X 2") CONNECTOR (08S-08O) UNION (08O-08OFX90) SCREW (M10-1.50 X 60MM) WASHER (M10) FLG LOCKNUT (M10-1.50) CONNECTOR (08S-08O45) ABRASION SLEEVE (1.75" X 18"") MOTOR MOUNT CABLE TIE (1/2") 20" LG CABLE TIE (1/16" TO 4") YOKE GUARD BOLT (1/2-NC X 2-1/2") FLG LOCKNUT (1/2-NC) YOKE (1-1/4", 5/16" KWY) ROTO WITCH YOKE CROSS/BEARING KIT (1-1/8") CABLE TIE (1/16" TO 11/4") CONNECTOR (06S-08O) DRILL STRING GUIDE ASSEMBLY

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2 & 3

NOT SHOWN:

FOOTNOTES:

1. O-RING SERVICE P/N 157-060, KNOB REPLACEMENT P/N 110-585 2. FOR OLD STYLE HYD MOTOR 155-579, USE SEAL KIT 500-347 FOR MOTOR VERSION 002, 003, 004 & 005.

SEAL KIT 500-658 IS TO BE USED WITH VERSION 006 MOTORS. 3. HYD. MOTOR 150-6055 BEGINS WITH S/N: CMW_______, USE SEAL KIT 500-3733

NOTE:

1. SEE O-RING CHART 300-301, IN BACK OF BOOK, FOR O-RING REPLACEMENT

06

ID0227054

90

REMOTE AIR RT10

10

3 5

9 8 7

21

2 4

6

01

ID0227314

91

REMOTE AIR RT10

REF PART NO. NUMBER

190-1430 1 195-1157 2 110-134 3 194-339 4 106-163 5 106-386 6 150-2854 7 194-349 8 105-832 9 165-521 10 195-280

QTY

1 2 1 2 2 1 1 3 1 1

DESCRIPTION

REMARKS

REMOTE AIR KIT AIR FILTER ASS'Y WORM CLAMP (2.062" TO 2.750") MOUNTING CLAMP (4.800") FLG SCREW (M8-1.25 X 30MM) FLG LOCKNUT (M8-1.25) SUCTION HOSE, HONDA COVER ADAPTER FLG LOCKNUT (1/4-NC) GASKET ELEMENT (PRIMARY)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0227314

92

BACKFILL BLADE

2

3

5 1 4

03

ID0226981

93

BACKFILL BLADE REF PART NO. NUMBER

1 2 3 4 5

300-9164 301-0435 183-411 105-472 105-833

QTY

1 1 1 1 1

DESCRIPTION

BLADE BACKFILL BLADE MOUNT PULL PIN (1/2" X 2") BOLT (1/2-NC X 5") FLG LOCKNUT (1/2-NC)

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. THIS STYLE BACKFILL BLADE MOUNT WILL ONLY FIT FIRST GENERATION RT PIVOTS. SEE BACKFILL BLADE PARTS PAGE ID0290030 FOR CURRENT PRODUCTION MOUNT ON NEW STYLE PIVOT.

NOTE:

03

ID0226981

94

BACKFILL BLADE

4

3 2

5

02

1

ID0290030

95

BACKFILL BLADE REF PART NO. NUMBER

1 2 3 4 5

190-1787 300-9164 302-2144 183-411 105-300 105-065

QTY

1 1 1 1 1

DESCRIPTION

BACKFILL BLADE KIT BLADE BFB MOUNT PULL PIN (1/2" X 2") BOLT (1/2 NC X 3-1/4") LOCKNUT (1/2-NC)

REMARKS

INCLUDES REF NO.'S 1-5; SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. THIS STYLE BACKFILL BLADE MOUNT WILL ONLY FIT NEW GENERATION RT PIVOTS. SEE BACKFILL BLADE PARTS PAGE ID0226981 FOR FIRST GENERATION MOUNT.

NOTE:

02

ID0290030

96

GREASE BOOM, ROLLER

12

2

15

9 13

11

3 14

2 5

11

4 12

1

10 6 8 7

06

ID0148266

97

GREASE BOOM, ROLLER REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

140-1315 115-464 125-009 142-755 105-379 115-024 105-825 319-410 105-707 180-445 105-1125 105-1126 140-1102 125-1022 115-003

QTY

1 2 1 1 1 1 2 1 1 1 2 2 1 1 1

DESCRIPTION

GREASE TENSION BOOM, 24" INTERNAL SNAP RING (3.149") BALL BEARING (W/051-345 INSTR) TAIL ROLLER (1.654"C6.8") LK BOLT (3/4-NC X 1-1/4", NLK) ZERK (02N, 5000) FLG LK BOLT (3/8-NC X 3/4) ZERK COVER SET SCREW (1/4-NF X 3/8", CUP) IDLER SHAFT (1.125"SQ X1.937") DIRT SHIELD DIRT SHIELD TAIL ROLLER - RELUBRICABLE BALL BEARING RELUBRICABLE (1.125", SQ) ZERK (1/4-NF, STR)

REMARKS

140-1316 (30"), 140-1317 (36"), SEE FOOTNOTE 2 EACH ROLLER ASSEMBLY REQUIRES ONE 115-464. - SEE FOOTNOTE 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 3 EACH ROLLER ASSEMBLY REQUIRES ONE 105-1125. - SEE FOOTNOTE 3 EACH ROLLER ASSEMBLY REQURIES ONE 105-1126. - SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

141-794 141-795 141-796 140-1114 140-1115 140-1116

GREASE BOOM ASM (24")-W/STD. ROLLER 142-754 GREASE BOOM ASM (30")-W/STD. ROLLER 142-754 GREASE BOOM ASM (36")-W/STD. ROLLER 142-754 GREASE BOOM ASM (24")-W/RELUBRICABLE ROLLER 140-1104 GREASE BOOM ASM (30")-W/RELUBRICABLE ROLLER 140-1104 GREASE BOOM ASM (36")-W/RELUBRICABLE ROLLER 140-1104

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3

FOOTNOTES:

1. 142-754 TAIL ROLLER ASSEMBLY INCL. REF #'S 2-4, 12 & 11.

2. 141-794 GREASE BOOM ASSEMBLY (24") INCL. REF #'S 1-12.

141-795 GREASE BOOM ASSEMBLY (30") INCL. REF #'S 1-12.

141-796 GREASE BOOM ASSEMBLY (36") INCL. REF #'S 1-12.

140-1114 GREASE BOOM ASSEMBLY (24"), RELUBRICALBLE, INCL. REF #'S 1-2 & 5-16.

140-1115 GREASE BOOM ASSEMBLY (30"), RELUBRICALBLE, INCL. REF #'S 1-2 & 5-16.

140-1116 GREASE BOOM ASSEMBLY (36"), RELUBRICALBLE, INCL. REF #'S 1-2 & 5-16.

3. 140-1104 TAIL ROLLER ASSEMBLY-RELUBRICALBE INCL'S REF #'S 2, 11-16.

NOTE:

06

ID0148266

98

ROLLER BOOM

2 3

10

17 15

14

3

4 5

6

16

14 10 11 12

2 9 13 7

1

8 8

10

ID0148280

99

ROLLER BOOM REF PART NO. NUMBER

QTY

1 301-8280 2 105-1126 3 115-464 4 125-009 5 142-755 6 180-445 7 106-033 8 105-136 9 105-379 10 115-003 11 105-668 12 105-833 13 106-034 14 105-1125 15 140-1102 16 125-1022 17 105-707

1 2 2 1 1 1 1 4 1 2 1 4 1 2 1 1 1

DESCRIPTION

ROLLER BOOM (24") DIRT SHIELD INTERNAL SNAP RING (3.149") BALL BEARING (W/051-345 INSTR) TAIL ROLLER (1.654"C6.8") IDLER SHAFT (1.125"SQ X1.937") JAM NUT (1-NC) BOLT (1/2-NC X 3-1/2", GD8) LK BOLT (3/4-NC X 1-1/4", NLK) ZERK (1/4-NF, STR) SET SCREW (1/4-NF X 1/4", CUP) FLG LOCKNUT (1/2-NC) SET SCREW (1-NC X 6", SQ) DIRT SHIELD TAIL ROLLER - RELUBRICABLE BALL BEARING RELUBRICABLE (1.125", SQ) SET SCREW (1/4-NF X 3/8", CUP)

REMARKS

301-8211 (30"), 301-8215 (36"), 301-8202 (42"), 301-8238 (42") - F/N 2 EACH ROLLER ASSEMBLY REQUIRES ONE 105-1126 - SEE F/N 1 & 3 EACH ROLLER ASSEMBLY REQUIRES ONE 115-464 - SEE F/N 1 & 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1 FOR QTY= 1

EACH ROLLER ASSEMBLY REQUIRES ONE 105-1125 - SEE F/N 1 & 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

141-792 141-793 141-791 140-1240 140-531 140-1112 140-1113 140-1111 140-1285 140-1106

ROLLER BOOM ASSEMBLY (24") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (30") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (36") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (42") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (48") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (24") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (30") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (36") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (42") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (48") W/RELUBRICABLE ROLLER 140-1104

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 2 &3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3

FOOTNOTES:

1. 142-754 TAIL ROLLER ASSEMBLY, INCL. REF #'S 2-5, 14 2. 141-792 ROLLER BOOM ASSEMBLY (24"), INCL. REF #'S 1-14 141-793 ROLLER BOOM ASSEMBLY (30"), INCL. REF #'S 1-14 141-791 ROLLER BOOM ASSEMBLY (36"), INCL. REF #'S 1-14 140-1240 ROLLER BOOM ASSEMBLY (42"), INCL. REF #'S 1-14 140-531 ROLLER BOOM ASSEMBLY (48"), INCL. REF #'S 1-14 140-1112 ROLLER BOOM ASSEMBLY (24"), INCL. REF #'S 1-3 & 6-17 140-1113 ROLLER BOOM ASSEMBLY (30"), INCL. REF #'S 1-3 & 6-17 140-1111 ROLLER BOOM ASSEMBLY (36"), INCL. REF #'S 1-3 & 6-17 140-1285 ROLLER BOOM ASSEMBLY (42"), INCL. REF #'S 1-3 & 6-17 140-1106 ROLLER BOOM ASSEMBLY (48"), INCL. REF #'S 1-3 & 6-17 3. 140-1104 TAIL ROLLER ASSEMBLY-RELUBRICALBLE INCL'S REF #'S: 2, 3, 10 & 14 THRU 17.

NOTE:

10

ID0148280

100

LOW PROFILE SPROCKET BOOM

3

2

16

15

14 4 6 3

14 10

10 5

12

2

9 13 7 1 8

01

11

ID0336937

101

LOW PROFILE SPROCKET BOOM REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 ROLLER BOOM (24") 2 DIRT SHIELD 2 INTERNAL SNAP RING (3.149") 1 BALL BEARING (W/051-345 INSTR) 1 LOW PROFILE SPROCKET, SEALED 1 IDLER SHAFT (1.125"SQ X1.937") 1 JAM NUT (1-NC) 4 FLG LOCKNUT (1/2-NC) 1 LK BOLT (3/4-NC X 1-1/4", NLK) 2 ZERK (1/4-NF, STR) 1 CHAIN TENSION 4 BOLT (1/2-NC X 2-3/4") 1 SET SCREW (1-NC X 6", SQ) 2 DIRT SHIELD 1 LOW PROFILE SPROCKET, GREASABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ)

301-8280 105-1126 115-464 125-009 140-1298 180-445 106-033 105-833 105-379 115-003 275-043 105-067 106-034 105-1125 140-1299 125-1022

DESCRIPTION

REMARKS

301-8211 (30") 301-8215 (36") 301-8202 (42") 301-8238 (48") - F/N 2 EACH ROLLER ASSY REQUIRES ONE 105-1126 - SEE F/N 1 & 3 EACH ROLLER ASSY REQUIRES ONE 115-464 - SEE F/N 1 & 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1, QTY = 1 PER ROLLER AND 1 PER BOOM

EACH ROLLER ASSY REQUIRES ONE 105-1125 - SEE F/N 1 & 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

140-1302 140-1287 140-1288 140-1304 140-1306 140-1303 140-1292 140-1293 140-1305 140-1307

LOW PROFILE SPROCKET BOOM, SEALED (24") LOW PROFILE SPROCKET BOOM, SEALED (30") LOW PROFILE SPROCKET BOOM, SEALED (36") LOW PROFILE SPROCKET BOOM, SEALED (42") LOW PROFILE SPROCKET BOOM, SEALED (48") LOW PROFILE SPRKT BOOM,GREASABLE (24") LOW PROFILE SPRKT BOOM,GREASABLE (30") LOW PROFILE SPRKT BOOM,GREASABLE (36") LOW PROFILE SPRKT BOOM,GREASABLE (42") LOW PROFILE SPRKT BOOM,GREASABLE (48")

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3

FOOTNOTES:

1- 140-1289 LOW PROFILE SPROCKET ASSY, SEALED, INCL REF #'S 2-5 AND 14 2- 140-1302 LOW PROFILE SPROCKET BOOM, SEALED (24"), INCL REF #'S 1-14 140-1287 LOW PROFILE SPROCKET BOOM, SEALED (30"), INCL REF #'S 1-14 140-1288 LOW PROFILE SPROCKET BOOM, SEALED (36"), INCL REF #'S 1-14 140-1304 LOW PROFILE SPROCKET BOOM, SEALED (42"), INCL REF #'S 1-14 140-1306 LOW PROFILE SPROCKET BOOM, SEALED (48"), INCL REF #'S 1-14 140-1303 LOW PROFILE SPROCKET BOOM, GREASABLE (24"), INCL REF #'S 1-3,6-16 140-1292 LOW PROFILE SPROCKET BOOM, GREASABLE (30"), INCL REF #'S 1-3,6-16 140-1293 LOW PROFILE SPROCKET BOOM, GREASABLE (36"), INCL REF #'S 1-3,6-16 140-1305 LOW PROFILE SPROCKET BOOM, GRESABLE (42"), INCL REF #'S 1-3,6-16 140-1307 LOW PROFILE SPROCKET BOOM, GREASABLE (48"), INCL REF #'S 1-3,6-16 3- 140-1290 LOW PROFILE SPROCKET ASSY, GREASABLE, INCL REF #'S 2,3,10,14-16 NOTE:

01

ID0336937

102

GREASE BOOM, SPROCKET

9

12

3 4

5

2

1

10 11

6 8

01

7

ID0337901

103

GREASE BOOM, SPROCKET REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12

1 GREASE TENSION BOOM, 24" 1 INTERNAL SNAP RING (3.149") 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 LOW PROFILE SPROCKET, GREASABLE 1 LK BOLT (3/4-NC X 1-1/4", NLK) 1 ZERK (02N, 5000) 2 FLG LK BOLT (3/8-NC X 3/4) 1 ZERK COVER 1 ZERK (1/4-NF, STR) 1 IDLER SHAFT (1.125"SQ X1.937") 1 DIRT SHIELD 1 DIRT SHIELD

140-1315 115-464 125-1022 140-1299 105-379 115-024 105-825 319-410 115-003 180-445 105-1126 105-1125

DESCRIPTION

REMARKS

140-1316 (30") 140-1317 (36") SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

140-1318 140-1319 140-1327

GREASE BOOM ASSY (24"), SPROCKET GREASE BOOM ASSY (30"), SPROCKET GREASE BOOM ASSY (36"), SPROCKET

INCL'S REF #1-12 INCL'S REF #1-12 INCL'S REF #1-12

FOOTNOTES:

1. 140-1290 LOW PROFILE SPROCKET ASSY, GREASABLE - INCL'S REF#2, 3, 4, 9, 11 & 12

NOTE:

01

ID0337901

104

24" SPLIT BOOM ASSY

5

3

11

4 6

10

12 7

8 22

19

15

23

17 2

1 14

18

18

21

16

13

16

20

17

9 24

18

16

15

17 16

25

18

FOOTNOTE 4 21

FOOTNOTE 3 17 06

23 ID0160966

105

24" SPLIT BOOM ASSY REF PART NO. NUMBER

QTY

1 140-1158 2 105-136 3 300-2687 4 300-2685 5 105-833 6 105-975 7 105-310 8 106-073 9 106-212 10 300-2686 11 106-301 12 105-357 13 105-076 14 300-2688 15 125-009 16 105-1126 17 105-1125 18 115-464 19 142-755 20 140-1102 21 125-1022 22 105-707 23 115-003 24 140-1298 25 140-1299

2 ABRASION RESISTANT SPLIT BOOM, 24" 4 BOLT (1/2-NC X 3-1/2", GD8) 2 SPACER 1 ADJUSTMENT BLOCK 4 FLG LOCKNUT (1/2-NC) 3 WASHER (3/4") 1 JAM NUT (3/4-NC) 1 BOLT (3/4-NC X 6") 1 BOLT (5/8-NC X 3-1/2") 2 TUBE SPACER 2 LOCKNUT (1/2-NC, NLK) 1 LOCKNUT (5/8-NC) 2 BOLT (1/2-NC X 3") 1 IDLER BLOCK 1 BALL BEARING (W/051-345 INSTR) 2 DIRT SHIELD 2 DIRT SHIELD 2 INTERNAL SNAP RING (3.149") 1 TAIL ROLLER (1.654"C6.8") 1 TAIL ROLLER - RELUBRICABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 SET SCREW (1/4-NF X 3/8", CUP) 1 ZERK (1/4-NF, STR) 1 LOW PROFILE SPROCKET, SEALED 1 LOW PROFILE SPROCKET, GREASABLE

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 4 SEE FOOTNOTE 3

NOT SHOWN:

140-1162 140-1122 140-1101 140-1310

24" SPLIT BOOM ASSY, ROLLER RELUBRICABLE - 24" SPLIT BOOM ASSY, ROLLER 24" SPLIT BOOM ASSY, SPROCKET-GREASEABLE 24" SPLIT BOOM ASSY, SPROCKET-SEALED

INCLUDES REF. #'S 1-19 INCLUDES REF. #'S 1-13, 14, 16, 17, 18 & 20-23.

INCLUDES REF. #'S 1-14, 16-18 21,23 & 25 INCLUDES REF. #'S 1-18 & 24

FOOTNOTES:

1. 142-754 TAIL ROLLER (1.654"C6.8") INCLUDES REF NO.'S, 15-19.

2. 140-1104 TAIL ROLLER RELUBRICABLE INCLUDES REF NO.'S, 16-18, & 20-23.

3. 140-1290 LOW PROFILE SPROCKET ASSY, GREASEABLE - INC'L REF #'S 16, 17, 18, 21 & 23.

4. 140-1289 LOW PROFILE SPROCKET ASSY, SEALED - INC'L REF #'S 15, 16, 17 & 18

NOTE:

06

ID0160966

106

30" SPLIT BOOM ASSY

5

3 11 4 6

12 7 8

10

16 22 23

15 14 2

17

1 18

13 16

18

21 17

9

24

18

19

20

16

15

17 16

25

18

FOOTNOTE 4

21

17 05

FOOTNOTE 3 23 ID0169774

107

30" SPLIT BOOM ASSY REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

2 ABRASION RESISTANT SPLIT BOOM, 30" 4 BOLT (1/2-NC X 3-1/2", GD8) 2 SPACER 1 ADJUSTMENT BLOCK 4 FLG LOCKNUT (1/2-NC) 3 WASHER (3/4") 1 JAM NUT (3/4-NC) 1 BOLT (3/4-NC X 6") 1 BOLT (5/8-NC X 3-1/2") 2 TUBE SPACER 2 LOCKNUT (1/2-NC, NLK) 1 LOCKNUT (5/8-NC) 2 BOLT (1/2-NC X 3") 1 IDLER BLOCK 1 BALL BEARING (W/051-345 INSTR) 2 DIRT SHIELD 2 DIRT SHIELD 2 INTERNAL SNAP RING (3.149") 1 TAIL ROLLER (1.654"C6.8") 1 TAIL ROLLER - RELUBRICABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 SET SCREW (1/4-NF X 3/8", CUP) 1 ZERK (1/4-NF, STR) 1 LOW PROFILE SPROCKET, SEALED 1 LOW PROFILE SPROCKET, GREASABLE

140-1161 105-136 300-2687 300-2685 105-833 105-975 105-310 106-073 106-212 300-2686 106-301 105-357 105-076 300-2688 125-009 105-1126 105-1125 115-464 142-755 140-1102 125-1022 105-707 115-003 140-1298 140-1299

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 4

NOT SHOWN:

140-1163 140-1123 140-1100 140-1100

30" SPLIT BOOM ASSY, ROLLER RELUBRICABLE - 30" SPLIT BOOM ASSY, ROLLER 30" SPLIT BOOM ASSY, SPROCKET, GREASEABLE 30" SPLIT BOOM ASSY, SPROCKET, SEALED

INLC'S REF #1-19 INCLUDES REF. #'S 1-13, 14, 16, 17, 18 & 20-23.

INCLUDES REF. #'S 1-14 16-18, 21 ,23 & 25 INCLUDES REF. #'S 1-18 & 24

FOOTNOTES:

1. 142-754 TAIL ROLLER (1.654"C6.8") INCLUDES REF NO.'S 15-19.

2. 140-1104 TAIL ROLLER RELUBRICABLE INCLUDES REF NO.'S 16-18 & 20-23.

3. 140-1290 LOW PROFILE SPROCKET ASSY, GREASEABLE - INC'L REF #'S 16, 17, 18, 21 & 23.

4. 140-1289 LOW PROFILE SPROCKET ASSY, SEALED - INC'L REF #'S 15, 16, 17 & 18

NOTE:

05

ID0169774

108

36" SPLIT BOOM ASSEMBLY

2 1

13

3 1

4 6

9 7

10

8

10

15

19

5

17 17

18 22 23 11

14 16

14

12 24

18 21

18

17 20 16

16

25

21

15 FOOTNOTE 4

18

16

17

FOOTNOTE 3 23 01

ID0346834

109

36" SPLIT BOOM ASSEMBLY REF PART NO. NUMBER

QTY

1 140-1329 2 105-136 3 300-2687 4 300-2685 5 105-833 6 105-975 7 105-310 8 106-073 9 106-212 10 300-2686 11 106-301 12 105-357 13 105-076 14 300-2688 15 125-009 16 105-1125 17 105-1126 18 115-464 19 142-755 20 140-1102 21 125-1022 22 105-707 23 115-003 24 140-1298 25 140-1299

2 36" SPLIT BOOM SIDE 4 BOLT (1/2-NC X 3-1/2", GD8) 2 SPACER 1 ADJUSTMENT BLOCK 4 FLG LOCKNUT (1/2-NC) 3 WASHER (3/4") 1 JAM NUT (3/4-NC) 1 BOLT (3/4-NC X 6") 1 BOLT (5/8-NC X 3-1/2") 6 TUBE SPACER 6 LOCKNUT (1/2-NC, NLK) 1 LOCKNUT (5/8-NC) 6 BOLT (1/2-NC X 3") 1 IDLER BLOCK 1 BALL BEARING (W/051-345 INSTR) 1 DIRT SHIELD 1 DIRT SHIELD 1 INTERNAL SNAP RING (3.149") 1 TAIL ROLLER (1.654"C6.8") 1 TAIL ROLLER - RELUBRICABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 SET SCREW (1/4-NF X 3/8", CUP) 1 ZERK (1/4-NF, STR) 1 LOW PROFILE SPROCKET, SEALED 1 LOW PROFILE SPROCKET, GREASABLE

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 4 SEE FOOTNOTE 3

NOT SHOWN:

140-1334 140-1333 140-1328 140-1332

36" SPLIT BOOM ASSY, ROLLER-SEALED 36" SPLIT BOOM ASSY, ROLLER-GREASABLE 36" SPLIT BOOM ASSEMBLY, SPROCKET 36" SPLIT BOOM ASSY, SPROCKET, SEALED

INCLUDES REF. #'S 1-19 INCLUDES REF. #'S 1-13, 14, 16, 17, 18 & 20-23.

INCLUDES REF. #'S 1-14, 16-18 21,23 & 25 INCLUDES REF. #'S 1-18 & 24

FOOTNOTES:

1. 142-754 TAIL ROLLER (1.654"C6.8") INCLUDES REF NO.'S, 15-19.

2. 140-1104 TAIL ROLLER RELUBRICABLE INCLUDES REF NO.'S, 16-18, & 20-23.

3. 140-1290 LOW PROFILE SPROCKET ASSY, GREASEABLE - INC'L REF #'S 16, 17, 18, 21 & 23.

4. 140-1289 LOW PROFILE SPROCKET ASSY, SEALED - INC'L REF #'S 15, 16, 17 & 18

NOTE:

01

ID0346834

110

GREASE CYLINDER

1 2

4 3

02

ID0113060

111

GREASE CYLINDER REF PART NO. NUMBER

1 2 3 4

151-221 157-059 157-762 157-759 155-723

QTY

1 1 1 1

DESCRIPTION

GREASE CYLINDER BACKUP RING (214 D90) ROD ASS'Y BARREL ASS'Y O-RING (214 D90)

REMARKS

INCL. REF NO.'S 1 THRU 4

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0113060

112

35K DURATOOTH CHAINS 4P CHAIN ASSEMBLIES

2

1

3 4

5 8

6

7

CHAIN ASSEMBLIES

REPAIR PART# 130-1101 130-1102 130-1103 130-1104 135-1230 135-1231 106-400 105-099 137-214 105-047 136-029 105-258

04

135-1601 1 0 0 0 6 7 13 13 13 26 0 0

135-1602 0 1 0 0 8 8 16 16 16 32 0 0

135-1603 135-1604 135-1605 135-1606 135-1607 135-1608 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 1 0 1 1 0 0 0 9 11 8 10 6 8 7 8 8 11 9 11 12 7 8 9 17 21 12 17 21 7 8 9 24 25 32 17 21 19 32 34 44 34 42 26 0 6 8 8 10 0 16 20 0 12 16 0

ID0436038

113

35K DURATOOTH CHAINS 4P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-1601 135-1602 135-1603 135-1604 135-1605 135-1606 135-1607 135-1608

DESCRIPTION

REMARKS

35K 4P DURA 52P 4.4 35K 4P DURA 62P 4.4 35K 4P DURA 68P 4.4 35K 4P DURA 84P 4.4 35K 4P DURA 52P 6.4 35K 4P DURA 62P 6.4 35K 4P DURA 68P 6.4 35K 4P DURA 84P 6.4

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

130-1101 35K 4P DIG CHAIN 52P 130-1102 35K 4P DIG CHAIN 62P 130-1103 35K 4P DIG CHAIN 68P 130-1104 35K 4P DIG CHAIN 84P 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-099 BOLT (3/8-NC X 7/8") 137-214 LONG SPACER, 35K DIG CHAIN 105-047 LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-258 BOLT (3/8-NC X 3-3/4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085.

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

04

ID0436038

114

35K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

1 2 3 4 5 6

11 10 9 8 7

CHAIN ASSEMBLIES

REPAIR PART# 135-1600 137-218 135-1531 0 0 137-208 0 0 130-1105 1 0 137-210 0 0 137-209 0 1 135-1230 11 13 135-1231 11 13 106-400 22 26 105-099 22 26 137-214 22 26 105-047 44 52 136-029 0 0 105-258 0 0

02

137-217 0 0 0 0 1 13 13 14 14 38 52 12 24

137-215 0 0 0 1 0 15 16 31 31 31 62 0 0

137-216 0 0 0 1 0 15 16 15 15 47 62 16 32

137-219 1 0 0 0 0 17 17 34 34 34 68 0 0

137-221 1 0 0 0 0 17 17 18 18 50 68 16 32

135-1450 135-1451 0 0 1 1 0 0 1 1 0 0 19 19 20 20 39 19 39 19 39 59 78 78 0 20 0 40

137-220 1 1 0 0 0 21 21 42 42 42 84 0 0

137-222 1 1 0 0 0 21 21 22 22 62 84 20 40

ID0440801

115

35K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 137-219 2 137-216 3 137-215 4 137-217 5 137-218 6 135-1600 7 137-221 8 135-1450 9 135-1451 10 137-220 11 137-222

1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

35K 2P DURA 68P 4.6 35K 2P DURA 62P 6.6 35K 2P DURA 62P 4.6 35K 2P DURA 52P 6.6 35K 2P DURA 52P 4.6 35K 2P DURA 44P 4.4 35K 2P DURA 68P 6.6 35K 2P DURA 78P 4.6 35K 2P DURA 78P 6.6 35K 2P DURA 84P 4.6 35K 2P DURA 84P 6.6

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 130-1105 35K 2P DIG CHAIN 44P 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-099 BOLT (3/8-NC X 7/8") 137-214 LONG SPACER, 35K DIG CHAIN 105-047 LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-258 BOLT (3/8-NC X 3-3/4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085.

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0440801

116

35K ALLIGATOR/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

5

6

4 3 2 1

REPAIR PART# 137-229 135-1531 0 137-208 0 130-1105 0 137-210 0 137-209 1 135-1230 6 135-1231 6 136-163 2 136-165 2 136-164 10 106-400 12 105-098 40 137-214 40 137-212 12 105-814 52 136-029 0 105-022 0

03

CHAIN ASSEMBLIES 137-230 0 0 0 1 0 8 7 3 3 10 16 46 46 16 62 0 0

137-231 1 0 0 0 0 6 6 5 5 12 12 56 56 12 68 0 0

135-1456 135-1457 137-232 0 0 1 1 1 1 0 0 0 1 1 0 0 0 0 7 10 135 6 9 7 6 3 7 6 3 7 14 14 14 12 12 16 66 42 68 66 66 68 12 12 16 78 78 84 0 12 0 0 24 0

ID0440916

117

35K ALLIGATOR/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

137-229 137-230 137-231 135-1456 135-1457 137-232

DESCRIPTION

35K 2P CMB DUR/ALG B 52P 4.6 35K 2P CMB DUR/ALG B 62P 4.6 35K 2P CMB DUR/ALG B 68P 4.6 35K 2P CMB DUR/ALG B 78P 4.6 35K 2P DURA/ALG B/O COM 78P 6.6 35K 2P CMB DUR/ALG B 84P 4.6

REMARKS

USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 130-1105 35K 2P DIG CHAIN 44P 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 136-163 RIGHT BIT HOLDER 136-164 CENTER BIT HOLDER 136-165 LEFT BIT HOLDER 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-098 BOLT (3/8-NC X 3") 137-214 LONG SPACER, 35K DIG CHAIN 137-212 SHORT SPACER, 35K DIG CHAIN 105-814 FLG LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-022 BOLT (3/8-NC X 4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K&35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

03

ID0440916

118

35K SHARK/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

1

2

3

4

03

7 8

CHAIN ASSEMBLIES

REPAIR PART# 137-233 135-1531 0 137-208 0 130-1105 0 137-210 0 137-209 1 135-1230 6 135-1231 6 135-637 2 135-638 2 135-639 10 106-400 12 105-098 40 137-214 40 137-212 12 105-814 52 136-029 0 105-022 0

6

5

135-1021 0 0 0 0 1 6 6 2 2 10 12 20 40 12 52 10 20

137-235 0 0 0 1 0 8 7 3 3 10 16 46 46 16 62 0 0

137-236 1 0 0 0 0 6 6 5 5 12 12 56 56 12 68 0 0

135-1445 135-1454 135-1455 137-237 1 0 0 1 0 1 1 1 0 0 0 0 0 1 1 0 0 0 0 0 6 7 10 7 6 6 9 7 4 6 3 6 4 6 3 6 14 14 14 16 12 16 12 16 28 62 42 68 56 62 66 68 12 16 12 16 68 78 78 84 14 0 12 0 28 0 24 0

ID0440984

119

35K SHARK/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

137-233 135-1021 137-235 137-236 135-1445 135-1454 135-1455 137-237

DESCRIPTION

REMARKS

35K 2P CMB DUR/SHK B 52P 4.6 35K 2P CMB DURA/SHK B 52P 6.6 35K 2P CMB DUR/SHK B 62P 4.6 35K 2P CMB DUR/SHK B 68P 4.6 35K 2P SHK B/O COM 68P 6.0 35K 2P CMB DUR/SHK B 78P 4.6 35K 2P CMB DUR/SHK B 78P 6.6 35K 2P CMB DUR/SHK B 84P 4.6

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 130-1105 35K 2P DIG CHAIN 44P 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 135-637 33/35K RIGHT BOLT-ON SHARK ADAPTER 135-638 33/35K LEFT BOLT-ON SHARK ADAPTER 135-639 33/35K CENTER CUT BOLT-ON SHARK ADAPTER 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-098 BOLT (3/8-NC X 3") 137-214 LONG SPACER, 35K DIG CHAIN 137-212 SHORT SPACER, 35K DIG CHAIN 105-814 FLG LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-022 BOLT (3/8-NC X 4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K &35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

03

ID0440984

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

120

35K SHARK & ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

5

4 3

2

1

6

03

8

CHAIN ASSEMBLIES

REPAIR PART# 135-1531 137-208 137-210 137-209 136-163 136-164 136-165 135-637 135-638 135-639 106-400 105-098 137-214 137-212 105-814 136-029 105-022

7

137-223 0 0 0 1 4 18 4 0 0 0 16 36 36 16 52 0 0

137-224 0 0 1 0 5 21 5 0 0 0 20 42 42 20 62 0 0

137-225 1 0 0 0 5 24 5 0 0 0 24 44 44 24 68 0 0

137-226 0 0 0 1 0 0 0 4 4 18 16 36 36 16 52 0 0

137-227 0 0 1 0 0 0 0 5 5 21 20 42 42 20 62 0 0

137-228 1 0 0 0 0 0 0 5 5 24 24 44 44 24 68 0 0

135-1452 135-1453 0 0 1 1 1 1 0 0 0 0 0 0 0 0 6 6 6 6 27 27 24 24 54 30 54 54 24 24 78 78 0 12 0 24

ID0444723

121

35K SHARK & ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

137-226 137-227 137-228 135-1452 135-1453 137-223 137-224 137-225

DESCRIPTION

35K 2P SHK B/O 52P 4.3 35K 2P SHK B/O 62P 4.3 35K 2P SHK B/O 68P 4.3 35K 2P SHK B/O 78P 4.3 35K 2P SHK B/O 78P 6.3 35K 2P ALG B/O 52P 4.3 35K 2P ALG B/O 62P 4.3 35K 2P ALG B/O 68P 4.3

REMARKS

SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 136-163 RIGHT BIT HOLDER 136-164 CENTER BIT HOLDER 136-165 LEFT BIT HOLDER 135-637 33/35K RIGHT BOLT-ON SHARK ADAPTER 135-638 33/35K LEFT BOLT-ON SHARK ADAPTER 135-639 33/35K CENTER CUT BOLT-ON SHARK ADAPTER 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-098 BOLT (3/8-NC X 3") 137-214 LONG SPACER, 35K DIG CHAIN 137-212 SHORT SPACER, 35K DIG CHAIN 105-814 FLG LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-022 BOLT (3/8-NC X 4")

FOOTNOTES:

1. USES 131-259 INSERT BITS

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

03

ID0444723

122

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS

HAMMER 3 5

4

SLIDE HAMMER 3 1

2

H

801-056

123

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS REF PART NO. NUMBER

1.

2.

3.

4.

5.

259-002 259-001 259-036 105-403 105-357 183-072 259-003

QTY

1 1 2 1 1

DESCRIPTION

REMARKS

BIT PULLER - SLIDE HAMMER BIT PULLER - HAMMER BIT PULLER JAM NUT (5/8-NC) LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER

INCL REF NO.'S 1 - 5 EARLY STYLE

FOOTNOTES

NOTE:

H

801-056

124

SPECIAL TOOLS - ALIG BIT PUNCH

5

3

4

1 9 2 8

6

H

7

801-057

125

SPECIAL TOOLS - ALIG BIT PUNCH REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

259-150 105-708 105-964 105-994 183-072 259-003 259-151 259-152 259-153 105-357

QTY

DESCRIPTION

REMARKS

INCL REF NO.'S 1 THRU 8

2 1 1 1 1 1 1 1 1

BIT PUNCH - SLIDE HAMMER SET SCREW (3/8-NC X 3/8", NLK) WASHER (.656") FLG LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER HEAVY BIT PUNCH-SLIDE HAMMER LIGHT BIT PUNCH-SLIDE HAMMER PUNCH ADAPTER-SLIDE HAMMER LOCKNUT (5/8-NC)

FOOTNOTES

NOTE:

H

801-057

126

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

127

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

128

WHEEL TRACK ASSEMBLY 18

1 2 5

15 14 21

20

4

4

19

16 13

23 22

12 3

A

17 24

10

11

9 8 6

7

TURN NOTCHED EDGE OF STOP UP

01

DETAIL A

ID0220688

129

WHEEL TRACK ASSEMBLY REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

125-1034 140-1175 300-8969 125-1035 105-1394 300-8976 170-1057 105-1303 105-825 300-7979 105-1301 106-659 106-031 106-383 115-005 300-8961 115-452 362-1410 105-754 105-1404 105-1403 300-9365 106-497 106-387

QTY

1 1 1 2 1 1 4 4 4 4 4 2 2 2 1 1 1 1 1 1 1 1 4 4

DESCRIPTION

BEARING HUB 13T SPROCKET HUB ASSEMBLY TAPERED BRG. 1.378 ID X 2.835 OD X .719 W INTERNAL SEAL,1.875 ID 2.875 O.D .315THK AXLE FRAME WELDMENT TRACK ROLLER 7" WASHER (.406 X 1.312 X .120) FLG LK BOLT (3/8-NC X 3/4) WHEEL CAP INTERNAL SNAP RING (2.188) SCREW (M12-1.75 X 55MM, 8.8) LOCKNUT (M12-1.75, NLK) FLG LK SCREW (M10-1.50 X 30MM) ZERK (1/4-NF, 90) GREASE CAP EXTERNAL SNAP RING N5000-300 RUBBER TRACK 200MM,21P,72MM SPINDLE WASHER (1.062") 4-5.2K SPINDLE NUT 1"-14 UNF SPINDLE NUT RETAINER WHEEL TRACK STOP FLG SCREW (M10-1.50 X 35MM) FLG LOCKNUT (M10-1.50)

REMARKS

SEE FOOTNOTE 1

USE LOCKTITE 242

SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. INSTALL SEAL WITH SMOOTH SURFACE TO INSIDE. GREASE RUBBER OF SEAL BEFORE INSTALLING ONTO 125-1034 2. TORQUE NUT TO 60 INCH LBS BEFORE INSTALLING ON 105-1403

NOTE:

01

ID0220688

130

WHEEL TRACK ASSEMBLY BEGINS WITH DATE CODE

5

1

2 19 20 6 10

9 8

11 13

24

7

22

A 12 14

21 23

4 16

18

15

15

18

16

17 TURN NOTCHED EDGE UP

4 3 17

DETAIL A 02

ID0249068

131

WHEEL TRACK ASSEMBLY BEGINS WITH DATE CODE REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

125-1047 140-1175 300-8976 170-1057 362-1410 300-8945 300-9365 105-1394 125-1046 105-382 105-381 105-380 300-8961 115-452 105-1303 105-825 300-7979 105-1301 115-005 106-383 106-659 106-031 106-387 106-497

QTY

1 1 1 4 1 1 1 1 1 1 1 1 1 1 4 4 4 4 1 2 2 2 4 4

DESCRIPTION

BEARING HUB 13T SPROCKET AXLE FRAME WELDMENT TRACK ROLLER 7" RUBBER TRACK 200MM,21P,72MM HUB ASSEMBLY WHEEL TRACK STOP INTERNAL SEAL,1.875 ID 2.875 O.D .315THK BEARING ASSEMBLY TANG WASHER (1-5/16") THRUST LOCKWASHER (1-5/16") THRUST LOCKNUT (1-5/16" NEF) GREASE CAP EXTERNAL SNAP RING N5000-300 WASHER (.406 X 1.312 X .120) FLG LK BOLT (3/8-NC X 3/4) WHEEL CAP INTERNAL SNAP RING (2.188) ZERK (1/4-NF, 90) FLG LK SCREW (M10-1.50 X 30MM) SCREW (M12-1.75 X 55MM, 8.8) LOCKNUT (M12-1.75, NLK) FLG LOCKNUT (M10-1.50) FLG SCREW (M10-1.50 X 35MM)

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 5 SEE FOOTNOTE 3 & 4

SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1- INSTALL SEAL WITH SMOOTH SURFACE TO THE INSIDE. 2- USE LOCTITE 242 OR EQUIVALENT. 3- TORQUE TO 200 FT-LBS THEN TIGHTEN UNTIL TAB ALIGNS WITH SLOT. 4- APPLY ANTI-SIEZE TO WASHER AND NUT FACE BEFORE TORQUING NUT. 5- MATCHED BEARING AND SPACER SET. DO NOT REPLACE INDIVIDUAL BEARING, OR RE-USE OLD SPACER WITH NEW BEARINGS.

NOTE:

02

ID0249068

132

WHEEL TRACK ASSEMBLY BEGINS WITH DATE CODE 0710

5

2 8 11 7 6 21 17

1

18 19

12

9 10

13

20

4 3

14 16 15 04

ID0250793

133

WHEEL TRACK ASSEMBLY BEGINS WITH DATE CODE 0710 REF PART NO. NUMBER

QTY

301-0560 125-1047 140-1175 301-0006 105-1301 362-1410 300-8945 105-1394 115-005 300-8961 115-452 106-383 106-031 106-659 105-1303 105-825 300-7979 105-382 105-381 105-380 170-1057 125-1046

1 1 1 4 1 1 1 1 1 1 2 2 2 4 4 4 1 1 1 4 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

DESCRIPTION

REMARKS

TRACK ASSEMBLY BEARING HUB 13T SPROCKET AXLE FRAME WELDMENT INTERNAL SNAP RING (2.188) RUBBER TRACK 200MM,21P,72MM HUB ASSEMBLY INTERNAL SEAL,1.875 ID 2.875 O.D .315THK ZERK (1/4-NF, 90) GREASE CAP EXTERNAL SNAP RING N5000-300 FLG LK SCREW (M10-1.50 X 30MM) LOCKNUT (M12-1.75, NLK) SCREW (M12-1.75 X 55MM, 8.8) WASHER (.406 X 1.312 X .120) FLG LK BOLT (3/8-NC X 3/4) WHEEL CAP TANG WASHER (1-5/16") THRUST LOCKWASHER (1-5/16") THRUST LOCKNUT (1-5/16" NEF) TRACK ROLLER 7" BEARING ASSEMBLY

INCLUDES ITEMS 1-21, SEE FOOTNOTE 9

ZAHN 4 WHEEL TRACK (EARLY) ZAHN 2 WHEEL TRACK (EARLY) RT10/RT12 WHEEL TRACK (EARLY) ZAHN 4 WHEEL TRACK ZAHN 2 WHEEL TRACK PEDESTRIAN TRENCHER WHEEL TRACK

SEE FOOTNOTE 1, 5 AND 6 SEE FOOTNOTE 1, 5 AND 6 SEE FOOTNOTE 1, 5 AND 7 SEE FOOTNOTE 1 AND 5 SEE FOOTNOTE 1 AND 5 SEE FOOTNOTE 1 AND 5

SEE FOOTNOTE 7

SEE FOOTNOTE 7

USE LOCKTITE 242 OR EQUIVALENT SEE FOOTNOTE 1 & 2 USE WHITTET-HIGGINS SOCKET BAS-065 OR EQUIVALENT TO REMOVE SEE FOOTNOTE 3

NOT SHOWN:

190-1593 190-1594 190-1595 190-1596 190-1597 190-1598 FOOTNOTES:

1. KIT TO UPGRADE RUBBER TIRE MACHINE TO TRACKS. 2. TORQUE TO 200 FT-LBS THEN TIGHTEN UNTIL TAB ALIGNS WITH SLOT. 3. APPLY ANTI-SIEZE TO WASHER AND NUT FACE BEFORE TORQUING NUT. 4. MATCHED BEARING AND SPACER SET. DO NOT REPLACE INDIVIDUAL BEARING, OR RE-USE OLD SPACER & SNAPRINGS WITH NEW BEARINGS. 5. KITS INCLUDE MULTIPLE TRACK ASSEMBLIES, ARTICULATION STOPS (FOR ZAHN UNITS,) AND TRACK ROTATION STOPS. 6. KIT INCLUDES NEW BRAKE ROTORS AND OPERATOR'S PLATFORM MOUNTS. 7. KIT INCLUDES NEW BRAKE ROTOR 8. DATE CODE STAMPED ON THIS PART. 9. TRACK ASSEMBLY 301-0560 IS NON-SELLABLE. IF NEEDING TO REPLACE ONE OF TRACK ASSEMBLY, 301-0560, ORDER KIT 190-1644.

NOTE:

04

ID0250793

134

RIGID TRACK ASSEMBLY

3

2

1

6

5 8 7 10

02

4

9

ID0271187

135

RIGID TRACK ASSEMBLY REF PART NO. NUMBER

QTY

1 301-2112 2 301-2113 3 362-1410 4 170-1057 5 105-054 6 105-159 7 105-1303 8 105-825 9 300-7979 10 105-1301

2 TRACK SPROCKET 1 TRACK FRAME 1 RUBBER TRACK 200MM,21P,72MM 4 TRACK ROLLER 7" 5 LUG NUT (7/16-NF) 5 CAM WASHER (1/2") 4 WASHER (.406 X 1.312 X .120) 4 FLG LK BOLT (3/8-NC X 3/4) 4 WHEEL CAP 4 INTERNAL SNAP RING (2.188)

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2

NOT SHOWN:

301-2118 1 RIGHT TRACK FRAME

FOOTNOTES:

1- LUGNUTS ARE TO BE INSTALLED IN REVERSE OF TYPICAL APPLICATION. 2- USE LOCTITE 242 OR EQUIVALENT

NOTE:

02

ID0271187

136

WHEEEL TRACK ROTATION STOPS

1

01

ID0259024

137

WHEEEL TRACK ROTATION STOPS REF PART NO. NUMBER

1

300-6319

QTY

DESCRIPTION

1 ROTATION STOP

REMARKS

ONE STOP PER TRACK REQUIRED. SEE FOOTNOTE 1.

NOT SHOWN:

FOOTNOTES:

1. USE EXISTING MOTOR MOUNTING BOLT (107-507) WITHOUT THE WASHER. WHEEL TRACK ROTATION STOPS ARE INCLUDED WITH THE TRACK INSTALLATION KIT. SEE WHEEL TRACK ASSEMBLY PAGE FOR KIT INFORMATION.

NOTE:

OLDER MACHINES MAY REQUIRE REMOVAL OF THE BRAKE ROTOR TO REMOVE THE EXISTING MOTOR MOUNT BOLTS. IF SO, UPDATE THE BRAKE ROTOR TO THE NEWER STYLE, AND REINSTALL BRAKE HUB TO PROPER TOURQUE VALUE.

01

ID0259024

138

NOTES:

ID0134963

139

MISCELLANEOUS

140

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

141

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

142

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

143

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

144

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which are D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

145

146

RT10 Related Publications Component

Model: RT10 ......................

RT10 ......................

RT10 ......................

RT10 ......................

Ass’y

P/N

Parts Manual ................................................................... ............. 053-1344 Operators Manual ........................................................... ............. 053-1362 Repair Guide (Service Manual) ...................................... .................. N/A Supplementary Maint Guide - Trencher ......................... .............. 050-633

Engine: Honda .................... Parts Manual – GX390QA ............................................... .............. 053-047 Honda .................... Operators Manual – GX390QA ....................................... .................. N/A Honda .................... Service (Shop) Manual – GX390QA ................................ .............. 055-047

Filters Engine: Air Filter Parts Ass’y - Honda ............................................................................................... N/A Element Set(primary,paper) - Honda ............................................................... 195-159 Element (secondary,foam) - Honda ................................................................. 195-159 Air Filter Parts Ass’y (Remote) ........................................................................................ 191-271 Element …………………………………………………………………………….… 195-280 Air Stack Cap (1.750”) – Honda ……………………………………………………………….. 195-187 Fuel Filter (04H-04H, in line) – Honda ………………………………………………………… 194-002 Hydraulic: Oil Filter Element (_1_-UNF, spin-on) .............................................................................. 155-910

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ............................................. 190-051 O-ring Repair Kit - Field Service (46 different O-rings) .................................................... 190-052

VER.01

ID0229611

147

RT12 Related Publications Component Model: RT12 .....................

RT12 .....................

RT12 .....................

RT12 .....................

Ass’y

P/N

Parts Manual .................................................................. ............. 053-1344 Operators Manual ........................................................... ............. 053-1362 Repair Guide (Service Manual) ...................................... .................. N/A Supplementary Maint Guide - Trencher ......................... .............. 050-633

Engine: Briggs .................... Parts Manual .................................................................... ............. 053-1370 Briggs .................... Operators Manual ............................................................ ............. 053-1369 Briggs .................... Service (Shop) Manual .................................................... ............. 053-1368 Honda……………… Parts Manual … IGX440 …………………………………...……….... 053-1175 Honda……………… Service (Shop) Manual … IGX390QA ……………………..……….. 053-1174

Filters Engine: Air Pre-Cleaner - Briggs .................................................................................................. 195-1479 Air Filter - Briggs ............................................................................................................. 195-1478 Air Filter – Honda ………………………………………………………………………………. 195-1157 Air Filter – Honda … Ends With CMWRT12XCB0000639 …………………….…………... 195-1302 Fuel Filter (04H-04H, in line) – Briggs ……………………………………………………..… 195-1480 Fuel Filter – Honda …………………………………………………………………………..… 195-1140 Hydraulic: Oil Filter Element (_1_-UNF, spin-on) ............................................................................. 155-910

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ............................................ 190-051 O-ring Repair Kit - Field Service (46 different O-rings) .................................................... 190-052

VER.02

ID0229612

148

149

ID0040564

150

ID0135281