Ditch Witch HT25 Trencher & A225 Backhoe Parts Manual 053-496 PDF

HT25

Parts Manual

Issue 11

053-496

HT25 ISSUE NO. 11PL-07/17 For Replacement Copy Order P/N 053-496

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works.

This manual contains information concerning the following models: HT25 Trencher & A225 Backhoe Attachment

Copyright 2000, 2001, 2003, 2004, 2005, 2006, 2012, 2014, 2016, 2017 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Modularmatic, Jet Trac, Roto Witch, Subsite, Fluid Miser, Perma-Soil, Power Pipe, Super Witch, Super Witch II, Pierce Arrow, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment. 

Descriptions and specifications in this book were current at publication. However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.



Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.



Footnotes provide more information to help you identify parts shown in the manual.



Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.



Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts:  Specify parts you need by part number and description, not by illustration reference numbers.  Have equipment model and serial number on hand to help ensure you get the right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 04

ID0128552

WARRANTY _________________________ DW WARRANTY Policy August, 2016

POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed.

The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse, abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part

by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 05

ID0134872

CONTENTS______________________ Decals Location - A225 ...................................... 164 Location - HT25 .......................................... 8 Engine Components Air Filter System ...................................... 18 Battery .................................................... 22 Engine – Kubota .................................. 14, 16 Fuel System ....................................... 24, 26 Muffler Shield .......................................... 20 Throttle .................................................... 28 Frame Components ROPS & Canopy ...................................... 46 Backfill Blade ........................................... 48 Backfill Blade Extension ........................... 50 Covers .................................................... 32 Dig Chain Clutch ..................................... 52 Digging Attachment ................................. 54 Gearbox ................................................... 56 Hood Cable .............................................. 34 Idler.......................................................... 42 Idler Roller ............................................... 44 Seat ................................................... 36, 38 Tracks ...................................................... 40 Hydraulics Adjustable Lever ..................................... 88 Backfill Blade Hydraulics ......................... 82 Boom Lift Hydraulics ............................... 84 Digging Chain Solenoid Hydraulics ......... 86 Ground Drive Controls ............................. 76 Ground Drive Conversion Kit.................... 78 Ground Drive Hydraulics ................... 72, 74 Control Valve .......................................... 90 Cylinder – 2.5x1.25x3 ................................. 94 Cylinder – 2.5x1.25x4 ................................. 96 Cylinder – 2x1x3 ........................................ 92 Cylinder – 3x1.5x10 .................................... 98 Diagram – HT25 .................................. 64, 66 Hookup .................................................... 80 Pump/Belt ............................................... 70 Schematic – HT25 ............................... 60, 62 Oil Cooler Hydraulics .............................. 68

Electrical Diagram ................................................ 104 Schematic ............................................ .102 Digging Components Small Tail Boom – 3’ ............................... 128 Dig Chain - 50K 2P RR .............................. 140 Dig Chain - 50K 2P RR .............................. 142 Dig Chain - 50K 4P RR ............................. 144 Dig Chain - 50K 4P RR.............................. 146 Dig Chain - 50K Adapters .......................... 138 Grease Cylinder ..................................... 134 Pivot – 10” - 12” - 16” ................................. 110 Pivot – 4” - 6” - 8” ...................................... 108 Pivot – Offset ........................................... 112 Pivot Stub – 10” - 12” - 16” - Offset ............... 116 Pivot Stub – 4” - 6” - 8” .............................. 114 Special Tool - Chain Jaw ........................... 148 Spoils Auger – 10” - 12” - 16” ..................... 120 Spoils Auger – 4” - 6” - 8” .......................... 118 Spoils Auger – Offset Pivot ................ 122, 124 Spoils Flap – 4” thru 16” & Offset ................. 126 Trench Cleaner – 2’ & 3’........................... 136 Wear Bar Boom - 3’ ............................... 132 Wear Bar Boom – 2’ .............................. 130 Accessories Cab Kit – HT25 ........................................ 154 Counterweight ........................................ 152 Heater Kit – HT25 .................................... 158 Working Light Kit .................................... 160

ID0135144

CONTENTS______________________ Backhoe Attachment Boom .................................................... 172 Boom Hydraulics ................................... 186 Boom Swing Hydraulics ........................ 188 Bucket ................................................... 176 Bucket Hydraulics ................................. 192 Swing Cylinder ....................................... 198 Dipper ................................................... 174 Dipper Hydraulics .................................. 190 Frame ................................................... 166 Hard Lines ............................................ 184 Valve Hydraulics ................................... 182 Valve Mount .......................................... 180 Control Valve ......................................... 194 Cylinder – 2.0”x1.25”x14.0”......................... 196 Schematic ............................................. 178 Stow Lock ............................................. 168 Swing Post ............................................ 170

Miscellaneous Bolt/Nut Torque Chart ............................ 202 Filters .................................................... 206 Optional Kits .......................................... 206 Parts Manual Change Request ............. 207 Related Publications .............................. 206 Replacement O-Ring Chart .................... 205 Warranty Registration ............................ 210

ID0135144

DECALS

ID0135069

DECAL LOCATION HT25

33

30

42

22

23

4 41

39 36

14 11 24

26 29 25

31 16 20

10

21 12

37

39 36

13

6 28 2 34 38

8

32 15 5 40 43

7 9 40

7

18

9 35

16

27

ID0087743

DECAL LOCATION HT25

4.75” .75” 1.25”

1 17 17 .25”

.25” 4.50”

11.00” 32

32

19

.25”

.25” 11.00”

4.5”

19

5

5 .50” .15”

3

16

17

32

17

ID0087743

DECAL LOCATION HT25

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

275-794 274-291 273-070 273-071 273-074 273-059 274-198 274-318 274-377 274-442 274-482 274-724 274-975 274-976 273-011 274-978 274-979 273-268 274-981 273-268 273-057 274-984 274-985 275-033 275-043 273-475 275-070 275-097 275-120 275-148 270-5127 275-172 273-058 275-303 275-355 275-497 700-016 273-079 275-123 700-020 274-877 273-452 273-267 273-459

QTY

DESCRIPTION

1 1 1 1 2 1 4 1 4 1 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1

DECAL KIT - HT25 SOUND POWER LUBRICATION CHART IMPORTANT HEATER USE OPERATOR CONTROLS (RIGHT) DANGER STRIPE (1.50” X 18”) NOTICE OIL LEVEL TIE DOWN LOCATION INTERLOCK LIFT LOCATION WARNING SINGLE OPERATOR WARNING ONE CALL NOTIFICATION HT25 MODEL IDENTIFIER (RIGHT) CONSOLE TRACK CONTROLS HT25 MODEL IDENTIFIER (LEFT) GRAPHIC STRIPE DANGER STRIPE (1.50” X 8.00”) DITCH WITCH LOGOTYPE (LEFT) DANGER STRIPE (1.50” X 8.00”) HT25 OPERATOR INSTRUCTIONS OVERHEAD CONTROL PANEL ELECTRICAL DIAGNOSIS NOTICE ELECTRICAL SYSTEM CHAIN TENSION WARNING READ MANUAL WARNING RUNAWAY DANGER CHAIN AND AUGER RESERVOIR (THF) FUEL TANK (DIESEL) BATTERY DITCH WITCH-ID DANGER (1.50” X 18”) WARNING ROLLOVER CAUTION HOT PARTS OIL DRAIN-ID WORKLIGHT IMPORTANT CANOPY DANGER CHAIN AND AUGER WORKLIGHT GRAPHIC STRIPE (SOLD PER INCH) NOTICE COOLANT DITCH WITCH BATTERY WARNING EXPLOSION POSSIBLE

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2

SEE FOOTNOTE 3 USE 65” SEE FOOTNOTE 4

FOOTNOTES

1. NOT PART OF KIT. SEE EC KIT. 2. NOT PART OF KIT. SEE 100-052 CAB KIT. 3. USE SILICONE SPARINGLY TO APPLY WORKLIGHT DECAL. 4. LOCATE DECAL ON BATTERY SO THAT DECAL IS VISIBLE WHEN VIEWING BATTERY.

16

ID0087743

NOTES:

ID0134963

ENGINE COMPONENTS

ID0134845

KUBOTA ENGINE 4

44

6 9

28 26

OIL CAP 23

22

27

19 25

21 16 28 29 11

1

35

20

46

43 24

35

33

38 3

2

37

12

11

33 12 11

18

39 17

40

12 13

35

34

5

15 35

7

36

32

36

8

41

45

10 42

37

31

14 30

13

ID0034568

KUBOTA ENGINE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

46.

QTY

194-541 306-869 1 170-357 1 115-381 1 301-735 1 110-898 1 303-197 1 194-094 1 302-697 1 196-008 1 111-054 20 106-396 19 107-357 2 303-198 1 303-199 1 106-383 2 105-806 9 106-381 2 155-724 1 302-769 2 107-032 8 196-367 1 149-537 1 194-829 1 116-857 1 116-858 1 107-135 8 110-353 4 106-972 4 154-330 1 105-823 1 306-868 1 106-632 7 106-382 2 106-387 6 106-709 5 149-835 1 106-386 3 149-552 1 515-538 1 105-003 1 110-373 1 194-100 1 364-529 1 190-053 1 364-521 1 364-520 1 105-117 1 178-883 1

DESCRIPTION

"OBS" ENGINE - T2 KUBOTA D1105-E2B LEFT SIDE ENGINE MOUNT HTS/SHEAVE BULK HOSE (1/4",SOLD PER 1") ENGINE MOUNT RADIATOR CAP (14 PSI) BELT GUARD EXHAUST MUFFLER INSULATED RADIATOR/OIL COOLER U-BOLT CLAMP (2" TO 2-1/16") SCREW (M10-1.25 X 25mm) WASHER (M10, HARDENED) SCREW (M10-1.25 X 35mm, 10.9) BELT GUARD BRACKET BELT GUARD BRACKET FLG LK SCREW (M10-1.50 X 30mm) SCREW (M8-1.25 X 25mm) FLG LK SCREW (M8-1.25 X 25mm) O-RING (217 D70) SHROUD MOUNTING BAR SCREW (M8-1.25X 20mm, BUT SOC) FAN SHROUD OIL FILLER NECK FLANGE FAN OUTLET HOSE INLET HOSE CLIP NUT (M8-1.25) WORM CLAMP (3/4" TO 1-1/2") SCREW (M6-1.00 X 65MM) PLUG (06O) FLG LK BOLT (5/16-NC X 3/4") RIGHT SIDE ENGINE MOUNT FLG LK SCREW (M12-1.75 X 35mm, SER) FLG LK SCREW (M10-1.5 X 20mm) FLG LOCKNUT (M10-1.5) FLG LOCKNUT (M12-1.75) MUFFLER GASKET FLG LK NUT (M8-1.25) ADAPTER (M12-1.25 X 06ORS) HOSE (06OFX90S-15"-3000) FLG LOCKNUT (5/16-NC) BOLT ON CLAMP (13/16") FAN SPACER COOLANT OVERFLOW RESERVOIR POLY-PATCH TANK REPAIR KIT RESERVOIR CAP RESERVOIR BOTTLE WASHER (5/16") GUIDE BAR

REMARKS

SEE NOT SHOWN FOR SERVICE PART

INCLUDES REF NO. 6 SEE FOOTNOTE 3 SEE FOOTNOTE 2

SEE FOOTNOTE 2

SEE FOOTNOTE 1

SEE FOOTNOTE 4

NOT SHOWN:

500-2333 1

GASKET, KUBOTA - (ENGINE TO MANIFOLD)

FOOTNOTES:

1-USE METAL GASKET THAT COMES WITH ENGINE PLUG 2-USE LOCTITE 271 3-USE LOCTITE 277 4-HOSE NEED TO BE HOOKED UP ON OPPOSITE SIDE OF VENT.

13

ID0034568

KUBOTA ENGINE

4 5 3

2

1

07

ID0064857

KUBOTA ENGINE REF PART NO. NUMBER

1.

2.

3.

4.

5.

194-541 194-034 194-041 217-453 194-380 171-017

QTY

DESCRIPTION

REMARKS

1 1 1 1 1

"OBS" ENGINE - T2 KUBOTA D1105-E2B BEGINS WITH S/N _____ "OBS" ENGINE - T1 KUBOTA D1105-E OBSOLETE, ENDS WITH S/N _____ OIL FILTER ELEMENT ALTERNATOR FAN PULLEY FAN BELT

194-378 1 194-379 1 194-381 1 194-383 3 217-952 1 213-306 1 217-953 194-386 1 194-382 1 194-100 054-051 1 213-338 1 215-242 194-210 1 153-352 1 194-218 1 153-353 1 499-827 1 155-748 1 500-2333 1

FLYWHEEL AND RING GEAR FUEL PUMP, MECHANICAL INJECTION PUMP GLOW PLUG OIL PRESSURE SWITCH BEGINS WITH S/N _____ STOP SOLENOID OBSOLETE, ENDS WITH S/N _____ STOP SOLENOID FUEL FILTER ELEMENT STARTER FAN SPACER OPERATOR MANUAL (KUBOTA ENGINE) BEGINS WITH S/N _____ TEMPERATURE SWITCH OBSOLETE, ENDS WITH S/N _____ TEMPERATURE SWITCH THERMOSTAT THERMOSTAT GASKET WATER PUMP WATER PUMP GASKET OIL FILLER PLUG O-RING (916 D90) GASKET, KUBOTA -(ENGINE - MANIFOLD)

NOT SHOWN:

NOT SHOWN:

FOOTNOTES:

NOTE:

07

ID0064857

AIR FILTER SYSTEM 4

1

3

9

8

2 1

15

5 13 10

14 6 11 5

12

11

TO ENGINE 7

5

04

ID0091211

AIR FILTER SYSTEM REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

QTY

194-093 1 194-039 1 194-038 1 195-1366 1 110-134 3 306-431 116-875 1 107-380 2 106-386 2 195-633 1 155-150 2 116-192 1 116-890 1 110-311 1 194-343 1

DESCRIPTION

AIR FILTER PARTS ASS'Y FILTER ELEMENT, SECONDARY FILTER ELEMENT, PRIMARY AIR FILTER END CAP WORM CLAMP (2.062" TO 2.750") HOOD SUPPORT BRACKET AIR INTAKE HOSE CARRIAGE BOLT (M8-1.25 X 30mm,BX) FLG LOCKNUT (M8-1.25) RESTRICTION INDICATOR (20"H20) S/O COUPLER (02N-02H) BULK HOSE (7/64",SOLD PER 1") AIR INTAKE HOSE WORM CLAMP (1-5/16" TO 3-1/4") MOUNTING CLAMP (5.750")

REMARKS

INCL REF NO.'S 1-4,

USE 28-1/2"

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0091211

THROTTLE HT25

19

3 2 1

5

4

18

8

14 6

16

12 10 9

15

11 13

10

10 7

17

04

ID0069460

THROTTLE HT25

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

QTY

196-363 1 111-064 1 105-797 2 106-353 2 105-085 1 110-741 1 106-888 1 301-936 1 106-958 1 106-013 3 106-090 1 106-380 1 106-557 1 196-058 1 105-284 2 306-869 306-868 194-034 500-2333 117-370 1

DESCRIPTION

REMARKS

CABLE THROTTLE (57.25" HD) KNOB (1/4-NC, ORANGE) FLG SCREW (M6-1 X 20mm, BX) FLG NUT (M6-1.0) LOCKNUT (1/4-NC) CABLE CLAMP SCREW (M4-.70 X 16mm) THROTTLE BRACKET SCREW (M10-1.25 X 20mm) WASHER (3/16") LOCK WASHER (M10) FLG LK SCREW (M8-1.25 X 16mm) NUT (M4-.70) CABLE SWIVEL (.081") WASHER (3/16") LEFT SIDE ENGINE MOUNT RIGHT SIDE ENGINE MOUNT "OBS" ENGINE - T1 KUBOTA D1105-E GASKET, KUBOTA (ENGINE TO MANIFOLD) RUBBER GUARD

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0069460

NOTES:

ID0134963

FRAME COMPONENTS

ID0135068

COVERS 6 32 40

38

31

33 17

20 11

37

24

15

12 13

25 27

16

22 8 21 1

9

16 28 21

29 15

10

23

18

14

7

22 5

26 30

6

27 15 3

5

22 4

19

21

16

27 6

19

16 2 39 5 36 34

16

14

41

35

ID0030937

COVERS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

QTY

301-907 1 301-971 1 306-431 1 313-093 1 105-799 9 106-383 6 362-823 1 107-379 1 301-937 1 107-328 8 107-358 4 308-678 1 116-852 1 302-911 1 105-798 18 105-797 16 117-558 1 214-961 217-309 110-757 1 18. 300-8195 1 19. 106-387 9 20. 107-393 8 21. 106-386 10 22. 106-353 10 23. 110-347 1 24. 105-751 1 25. 502-651 2 26. 105-767 1 27. 116-978 AR 28. 105-271 5 29. 106-396 5 30. 105-820 2 31. 116-867 1 32. 106-387 2 33. 106-561 1 34. 306-930 1 35. 106-574 8 36. 303-264 1 37. 306-528 1 38. 302-983 1 39. 106-382 2 40. 192-006 1 306-609 1 41. 306-929 2

REMARKS

DESCRIPTION

FIREWALL ACCESS PANEL HOOD SUPPORT BRACKET AIR INTAKE SHROUD FLG LK SCREW (M10-1.5 X 25mm) FLG LK SCREW (M10-1.50 X 30mm) COVER LATCH BRACKET BRACKET WELLNUT (M8-1.25) WELLNUT (M4-0.7) CONSOLE PANEL OPERATOR COMPARTMENT DOOR FLG SCREW (M8-1.25 X 25mm, BX) FLG SCREW (M6-1 X 20mm, BX) ADJUST LEVER LATCH (LOCKING) KEY, PAIR (BASE CODE) LOCK PLUG 4/LATCH (BASE CODE) LEVER LATCH (ADJUST, LOCKING) HOOD FLG LOCKNUT (M10-1.50) SCREW (M4-.70 X 16mm, BX) FLG LOCKNUT (M8-1.25) FLG NUT (M6-1.00) SLOT PLUG (1" x 3") HOOD LATCH SCREW (M6-1.0 X 35mm) HINGE BULK EDGE (1/4", SOLD PER 1") SCREW (M10-1.50 X 40mm) WASHER (M10, HARDENED) FLG LOCK BOLT (1/4-NC X 3/4") FLOOR MAT FLG LOCKNUT (M10-1.50) LOCKNUT (M8-1.25, PRV TRQ, 10.9) SHROUD PLATE CLIP NUT (M6-1.00) RADIATOR SCREEN COVER PLATE COOLER SUPPORT ARM FLG LK SCREW (M10-1.50 X 20mm) HIGH FREQUENCY HORN HIGH FREQUENCY HORN SHROUD BRACKET

NOT SHOWN 110-981 AR BULK CABLE (1/16", SOLD PER 1') 115-380 AR WEATHER STRIPPING (3/8" X 3/4")

SEE FOOTNOTE 1

OBSOLETE

SEE FOOTNOTE 1 SEE FOOTNOTE 2

USE 90"

USE TO HOLD FILTER HEAD

OBSOLETE

USE 24"

FOOTNOTES:

1. USE 242 LOCTITE ON 105-798 AND 106-353.

2. USE SILICON TO HOLD SLOT PLUG TO FRAME.

NOTE:

14

ID0030937

TRACK

2 1 4 5

20

3 10

11 12 6

9

13 15

8 7 14 17

16 19 18

04

ID0158233

TRACK REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

QTY

170-336 2 310-650 2 106-268 18 117-191 2 301-667 2 116-853 4 106-378 4 170-335 8 106-442 8 107-337 8 106-033 2 107-316 2 141-575 2 106-081 16 166-342 2 166-438 2 107-135 2 310-662 2 355-860 2 106-381 2 310-700 2 310-705 2

DESCRIPTION

REMARKS

FRONT IDLER ROLLER PUSH FORK SCREW (M10-1.50 X 25mm, SOC) TRACK SPRING SPRING GUIDE BUFFER (M6-1.00) FLG LK SCREW (M6-1.00 X 12mm) IDLER ROLLER FLG LOCKNUT (M16-2.00,PRV TRQ) SCREW (M16-2.00 X 150mm, 10.9) JAM NUT (1-NC) SET SCREW (1-NC X 7.75", SQ) 12 TOOTH SPROCKET SCREW (M10-1.50 X 35mm,12.9) PLANETARY GEAR BOX PLANETARY GEAR BOX(FREE WHEELING) CLIP NUT (M8-1.25) INSIDE MOTOR GUARD RUBBER TRACK FLG LK SCREW (M8-1.25 X 25mm) ROCK GUARD ROCK GUARD

SEE FOOTNOTE 2 OBSOLETE SEE FOOTNOTE 5 AND 8 SEE FOOTNOTE 1

SEE FOOTNOTE 3

SEE FOOTNOTE 7 SEE FOOTNOTE 6 SEE FOOTNOTE 5 AND 8 ENDS WITH S/N# K60000096 BEGINS WITH S/N# K60000097. SEE FOTNOTE 9 SEE FOOTNOTE 4

BEFORE SERIAL # AFTER SERIAL #

NOT SHOWN:

FOOTNOTES:

1.

2.

3.

4.

5.

6.

7.

8.

9.

COMPRESS SPRING TO A LENGTH OF 9-1/2".

SEE PARTS PAGE 805-705 FOR IDLER ASSY SEE PARTS PAGE 805-707 FOR ROLLER ASSY QTY OF 2 ON 107-135 REF. #16 AFTER SERIAL # 1V0014.

TORQUE SPROCKET BOLTS IN PLANETARY GEARBOX TO 70 FT LBS. NARROW MACHINED EDGE ON SPROCKET GOES NEXT TO GROUND DRIVE MOTOR WHEN INSTALLED. USE COPER ANTI SEIZE ON 107-316 SET SCREW. USE 242 LOCTITE ON PARTS # 106-268 AND 106-081.

WHEN REPLACING 166-342 WITH 166-438, ORDER PLANETARY IN PAIRS FOR FIRST TIME REPLACEMENT.

NOTE:

04

ID0158233

FRONT IDLER

ENDS WITH S/N: CMWSK350P60000600 ENDS WITH S/N: CMWSK650A60000427

ENDS WITH S/N: CMWSK500H60000254 ENDS WITH S/N: CMWXT850C60000125

2

4 1

3 3

3 2

1

10

ID0024142

FRONT IDLER

ENDS WITH S/N: CMWSK350P60000600 ENDS WITH S/N: CMWSK650A60000427 REF PART NO. NUMBER

QTY

170-336 353-477 105-561 170-342 167-307

2 2 1 1

1 2 3 4

DESCRIPTION

FRONT IDLER ROLLER BLOCK, PUSH ROLL PIN (3/8" X 2-3/4") IDLER ROLLER SUB SHAFT, IDLER

ENDS WITH S/N: CMWSK500H60000254 ENDS WITH S/N: CMWXT850C60000125 REMARKS

INCLUDES REF NO.'S 1-4 OBSOLETE, SEE FOOTNOTE 2 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. FOR REPLACEMENT BEARINGS, USE PART NUMBER 125-005.

2. SEE PARTS PAGE FRONT IDLER" ID0253424 FOR CURRENT PRODUCTION COMPONENTS.

NOTE:

10

ID0024142

IDLER ROLLER

1

2

1

06

ID0024145

IDLER ROLLER REF PART NO. NUMBER

1 2

170-335 125-124 353-487

QTY

DESCRIPTION

- IDLER ROLLER 2 BALL BEARING (.631) 1 SPACER TUBE

REMARKS

INCLUDES REF NO.'S 1, 2

NOT SHOWN:

FOOTNOTES:

NOTE:

06

ID0024145

BACKFILL BLADE

18

16

2 5

10 1

15

14

15

5

10

16 14

9

11

16

4

12

2

13 7

17

17

3 16

8

9 12

FRONT PART OF FRAME

14 15

6

01

ID0139689

BACKFILL BLADE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

100-190 306-870 125-771 302-922 115-020 106-632 179-099 106-067 105-514 126-131 181-982 151-028 183-826 178-356 181-974 106-470 125-772 183-877 149-111

QTY

1 1 2 1 1 2 1 1 1 2 2 2 1 3 3 4 2 -

DESCRIPTION

BACKFILL BLADE CONVERSION KIT BACKFILL BLADE MOUNT COMPOSITION BUSHING (1.25") PIVOT GIMBAL ZERK (02N) FLG LK SCREW (M12-1.75 X 35mm) UPPER CLEVIS PIN (2" X 7.26") CASTLE NUT (1-1/2-NF) COTTER PIN (1/4" X 3") THRUST BUSHING SET (1.5") TAPERED INSERT (1.25"} CYL (2.5" X 1.25" X 4") TAPERED PIN (31.7mm X 80mm) TAPERED PIN (1.5" X 10.63") TAPERED INSERT (1.5") FLG SCREW (M16-2.00 X 40mm) COMPOSITION BUSHING (1.5") TAPERED PIN (38.1mm X 110mm) CYL (2.5" X 1.25" X 3")

REMARKS

INCLUDES REF. NO.'S 1-18. SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. ALSO INCLUDES 105-198, 115-811, 117-224, 154-220, 154-226, 183-826, 499-022, 515-019, AND 515-135.

REFER TO PART PAGE 806-493 FOR MORE INFORMATION.

NOTE:

01

ID0139689

DIG CHAIN CLUTCH

2

20

3 7

4

15

16 14

8

1

11

10 19

12 13

6

15 21

17

18 21 9

23 22

08

5

ID0091143

DIG CHAIN CLUTCH REF PART NO. NUMBER

QTY

DESCRIPTION

1. 150-723 1 CYLINDER(1"BOREX 2"STROKE W/EYE) 190-196 - SEAL REPAIR KIT (1.1" X .312") 2. 301-735 - ENGINE MOUNT 3. 106-535 1 SHLD BOLT (M12 X 30mm, M10-1.50) 4. 105-894 1 LOCKNUT (M10-1.50, PRV TRQ, 10.9) 5. 106-079 - SCREW (M10-1.5 X 30mm) 6. 105-508 1 COTTER PIN (3/32" X 1") 7. 303-198 - BELT GUARD BRACKET 8. 170-357 - HTS/SHEAVE 9. 306-450 1 REAR BELT GUARD 10. 302-907 1 BELT CLUTCH 11. 107-605 1 WASHER (1/2", HARDENED) 12. 170-351 1 IDLER SHEAVE (5") 13. 106-335 1 SCREW (M12-1.75 X 70mm) 14. 106-685 1 LOCKNUT (M12-1.75,PRV TRQ,10.9) 15. 110-058 2 MACH BUSHING (1.000", 18GA.) 16. 178-434 1 BRONZE BUSHING 17. 115-499 1 KLIP RING (1.000") 18. 165-923 1 KEY (1/4 X 2") 19. 155-723 2 O-RING (214 D90) 20. 301-975 - DIGGING ATTACHMENT FRAME 21. 106-638 2 SET SCREW (M10-1.5 X 12mm) 22. 170-353 1 BELT (3/3V 60) 23. 170-349 1 GEARBOX SHEAVE

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. CLEAN PAINT OFF OF PIN AND APPLY NEVER SIEZE.

NOTE:

08

ID0091143

GEARBOX HT25

8 13

8 11

18

17 6

9

7

12 6

3

15

7

10

1

5 20

16

4

21

2 20 19 22

14

07

ID0091151

GEARBOX HT25

REF PART NO. NUMBER

QTY

166-191 1 166-307 1 1. 105-416 1 2. 106-079 9 3. 106-338 1 4. 115-289 2 5. 155-827 1 6. 125-159 2 7. 125-160 2 8. 125-161 2 9. 116-871 1 10. 165-568 1 166-305 1 11. 165-569 AR 165-570 AR 165-571 AR 117-474 AR 12. 165-572 AR 165-573 AR 165-574 AR 117-514 AR 13. 167-351 1 166-306 1 14. 167-352 1 15. 169-081 1 16. 169-082 1 17. 178-245 1 18. 155-762 1 19. 149-271 1 20. 184-993 2 21. 178-237 1 22. 110-762 2

DESCRIPTION

REMARKS

GEARBOX INCL REF NO'S 1 THRU 22. OBSOLETE GEARBOX INCL REF NO'S 1 THRU 22 WASHER (5/8") SCREW (M10-1.50 X 30mm) SCREW (M16-2.00 X 30mm) PLUG (06N, SOC) INTERNAL SEAL (.984") TAPERED BEARING (1.750") TAPERED RACE (2.875") TAPERED BEARING/RACE (.984") INTERNAL SEAL (2.283") INSTALL TO A DEPTH OF .375" HEADSHAFT GEAR OBSOLETE HEADSHAFT GEAR INPUT SHIM(1.575"X2.031"X.003") INPUT SHIM(1.575"X2.031"X.010") INPUT SHIM(1.575"X2.031"X.030") INPUT SHIM(1.575"X2.031"X.002") OUTPUT SHIM .003" OUTPUT SHIM .010" OUTPUT SHIM .030" OUTPUT SHIM .002" INPUT SHAFT OBSOLETE INPUT SHAFT HEADSHAFT HEADSHAFT GEARBOX HOUSING GEARBOX COVER SEAL RING SEE FOOTNOTE 1 & 2 O-RING (132 D70) SEE FOOTNOTE 1 & 2 EXTERNAL SEAL (3.619") PIVOT ARM BUSHING PIVOT BUSHING SPACER MACHINERY BUSHING (4.000")

NOT SHOWN:

FOOTNOTES:

1.

2.

USE LOCTITE 7649 PRIMER N TO CLEAN ITEM 17 AND LOCATION ON SHAFT USE LOCTITE 680 RETAINING COMPOUND TO LOCK ITEMS 17 & 18 TO ITEM 15.

NOTE:

07

ID0091151

NOTES:

ID0134963

HYDRAULICS

ID0135071

HYDRAULIC DIAGRAM HT25 AFTER S/N K600000097

11

6

12

1 16

10

9

17 2

B

C

A

D

15 3 14

4

13

8

7

5

PRESSURE 5 RETURN CHARGE INACTIVE

03

ID0161319

HYDRAULIC DIAGRAM HT25 AFTER S/N K600000097 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

301-896 149-808 149-918 149-412 166-342 166-438 149-101 158-805 159-464 170-723 149-136 151-029 149-111 151-028 302-697 158-576 159-386 157-830 151-231

QTY

-

DESCRIPTION

HYDRAULIC RESERVOIR TANDEM PUMP PUMP (8CC/ REV GEAR) FILTER ELEMENT (1-UNF) PLANETARY GEARBOX PLANETARY GEARBOX HYDRAULIC CONTROL VALVE HYD CONTROL VALVE (4-WAY,2-POS) CYLINDER (1.1" X .375" X 2.0") CYLINDER (1" X .3375" X 2.0") HYDRAULIC LOCKOUT VALVE CYLINDER (3.0" X 1.50" X 10.0") CYLINDER (2.5" X 1.25" X 3") CYLINDER (2.5" X 1.25" X 4") RADIATOR/OIL COOLER CHECK VALVE (12SF-12SF) FILTER HEAD (12SF-12SF) HYDRAULIC VALVE PUMP CYLINDER

REMARKS

BEFORE S/N K60000096 AFTER S/N K600000097

OBSOLETE

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. FOR MORE INFORMATION SEE GROUND DRIVE CONTROL PART PAGE(808-560).

NOTE:

03

ID0161319

GROUND DRIVE HYDRAULICS HT25

28 21

7

4

21 C

5

B 3

A 3

D 2

19

20

24

C B

22

D A

11

7 1

6

9

5

8

TO OIL FILTER

10

8

23 9 C

27 18

D

A

12

B 12

15 FWD CASE DRAIN D 26 25

16 REV

14

FWD A

13

B

C

CASE DRAIN 25

25

26

REV

17 25 17

01

ID0162146

GROUND DRIVE HYDRAULICS HT25

REF PART NO. NUMBER

1.

149-808 197-103 154-235 154-233 515-196 110-270 305-256 106-331 106-382 106-387 303-846 153-329 159-156 159-148 153-377 153-376 153-378 153-379 166-342 166-438 515-224 154-299 154-327 154-256 154-715 154-701 149-101 153-381 153-380 154-749 154-942

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

QTY

2 2 1 4 2 2 2 4 1 1 2 1 1 1 1 2 2 1 2 1 1 4 2 1 1

DESCRIPTION

TANDEM PUMP REBUILT HYD PUMP (149-808) CONNECTOR (08S-08O90) CONNECTOR (08S-08O) HOSE (08OFX90-17"-3000) BOLT-ON CLAMP (9/16", HALF) BACKUP SPACER SCREW (M10-1.50 X 50mm) FLG LK SCREW (M10-1.50 X 20mm) FLG LOCKNUT (M10-1.50) MOUNTING BRACKET TEE (08OF-08O-04O-04O) QDC ADAPTER (02-04OF) DUST CAP (1/8") LEFT BOTTOM TUBE LEFT TOP TUBE RIGHT TOP TUBE RIGHT BOTTOM TUBE PLANETARY GEARBOX PLANETARY GEARBOX HOSE (08OFX90-21"-3000) RUN TEE (08S-08O-08O) CAP (08OF) UNION (08O-08OFX90) HOSE (04OFX90-18"-3000) HOSE (04OFX-14"-3000) HYDRAULIC CONTROL VALVE CONNECTOR (06BS-080) CONNECTOR (04BS-060) HOSE (08OFX90S-18"-3000) HOSE (08OFX90S-13"-3000)

REMARKS

BEFORE S/N: K600000096 AFTER S/N:K600000097

NOT SHOWN:

157-039

O-RING (014 D90)

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

01

ID0162146

GROUND DRIVE CONTROLS AFTER SERIAL NUMBER

46 44

38 40

17 14 15

3 8

13

48 2 5

16 1

A

9

6C

2

12

CHARGE PRESSURE 1 D

1

8

26

10

P

2

4

7

11

20

18

18

21

B

18

C 22

19

24 45 31 30 23 28 25 22 29 28 B 23 A 32 27 33 42 D

10 C

10 D 10 B

10

A

36 37 24 23 8 39

07

34 35 34 28

36 37 24 23

43

41

47

27

ID0046387

GROUND DRIVE CONTROLS AFTER SERIAL NUMBER REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

46.

47.

48.

1 1 2 2 2 1 1 6 4 5 1 1 4 4 4 4 2 4 1 1 1 4 4 6 2 1 4 8 2 2 4 2 2 4 4 2 2 2 1 2 1 1 1 1

364-626 157-830 319-956 154-250 154-220 154-221 154-230 106-848 106-385 154-715 155-486 319-863 107-906 106-205 106-650 106-350 214-575 110-026 116-044 157-837 116-044 154-365 110-386 105-152 105-079 154-265 106-237 105-284 107-366 151-075 105-820 105-095 319-764 179-571 115-638 166-479 118-018 158-805 320-084 319-864 149-808 154-405 153-270 166-221 319-763 159-156 157-949 154-226

DESCRIPTION

HYDRAULIC RESERVOIR HYDRAULIC VALVE GROUND DRIVE LEVER CONNECTOR (04O-06S45) CONNECTOR (04O-06S) CONNECTOR (06S-06O) BRANCH TEE (06S-04O-04O) FLG SCREW (M6-1.00 X 25mm) FLG LOCKNUT (M6-1.00) HOSE (04OFX90-18"-3000) HOSE (06OFX90-31"-3000) SWITCH MOUNT SCREW (#8-32 X 3/4", SOC GD8) WASHER (.191") LOCK WASHER (#8) NUT (#8-32) PROXIMITY SWITCH WORM CLAMP (1/2" TO 1-1/4") BLUK HOSE (5/8", SOLD PER 1") S/O COUPLER (10H-10H-06O) BULK HOSE (5/8", SOLD PER 1") CONNECTOR (02N-04O) ROD END (1/4-NF) NUT (1/4-NF) LOCK WASHER (1/4") UNION RUN TEE (04OFX-04O-04O) LOCKNUT (M6-1.00, PRV TQR, NLY) WASHER (3/16") SCREW (M6-1.00 X 30mm, 8.8) CYLINDER (1.1" X .312" X 1") FLG LK BOLT (1/4-NC X 3/4") WASHER (1/4") SPRING HOUSING SPRING SUPPORT COMPRESSION SPRING CONTROL SHAFT INTERNAL SNAP-RING (1.875") HYD CONTROL VALVE (4WAY-2POS) TRUNION LEVER LEVER COVER TANDAM PUMP CONNECTOR (08S-12O) CROSS (12O-12O-16H-12H) HANDLES 1/2-NC, ORANGE CYLINDER MOUNT QDC ADAPTER (02-04OF) PRESS ADJ FITTING (1/2-20 UNF) CONNECTOR (04O-06S90)

REMARKS

USE TO 4" USE TO 9"

SEE FOOTNOTE 1

SEE FOOTNOTE 2

NOT SHOWN: FOOTNOTES:

1. THE ROD ENDS(110-386) THAT ASSEMBLY ON TOP OF CYLINDER(151-075) MAY NEED TO BE GROUND DOWN FOR CLEARANCE. 2. WHEN SETTING PUMP FOR NEUTRAL: ADJUST LEVERS TO NEUTRAL POSITION ON VALVE. LEAVE NUTS LOOSE ON TOP OF CYLINDER MOUNT(319-763). START MACHINE AND ALLOW PUMP TO FIND NEUTRAL. IF PUMP DOES NOT FIND NEUTRAL, THEN ADJUST ACCORDLY TO SET PUMP. AFTER FINDING NEUTRAL TIGHTEN NUTS ON TOP AND BOTTOM OF CYLINDER CYLINDER MOUNT(319-763).

NOTE:

07

ID0046387

HYDRAULIC CONTROL VALVE HT25

1

2

3

4 5

12 10

14 10 17

13

18 19 15 6 7 8 9 12

20

10

21 14 13

10

16 17

11

18 19 15

(OLD STYLE KIT)

20 21

02

ID0070274

HYDRAULIC CONTROL VALVE HT25

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

153-063 157-218 149-664 499-222 499-143 157-744 153-080 107-432 107-428 106-078 499-166 499-139 107-427 499-133 499-138 499-006 499-134 107-534 107-322 499-137 499-135

QTY

1 1 1 1 1 1 1 2 2 3 1 2 4 1 1 1 1 3 3 1 1

DESCRIPTION

REMARKS

VALVE SPRING KIT O-RING ( D70) CHECK VALVE RELIEF VALVE KIT VALVE LEVER SEAL, JOYSTICK VALVE FLANGE WASHER, SCHNORR SCREW (M5 X 10mm) NUT (M8-1.25) FULCRUM (JOYSTICK) ARTICULATED JOINT SCREW (M5 X 14mm) ROD END PIN ROD END JOYSTICK LEVER ASSY ARTICULATION HOLDER A6 GALVANIZED WASHER SCREW (M6-1.00 X 25mm, SOC, 12.9) BELLOW CLAMP RUBBER BELLOW

kJ.BNUKHU,KYJFNGXXZ

OBSOLETE OBSOLETE

OBSOLETE

INCLUDES REF NO.'S 13-15, 17-21 AND NEW STYLE FULCRUM. USE LOCTITE 243 OR EQUIVALENT.

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0070274

HYDRAULIC CYLINDER 2.0" ID BARREL X 1.00" OD ROD X 3.0" STROKE

2

1 3 4

5

6

7

C

806-686

HYDRAULIC CYLINDER 2.0" ID BARREL X 1.00" OD ROD X 3.0" STROKE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

151-173 190-165 150-778 150-282 106-096 150-775 150-772 150-680

NOT SHOWN: 259-100 259-235 259-239 259-241 259-188

QTY

1 1 1 1 1 1 1

DESCRIPTION

REMARKS

HYD CYL (2" X 1" X 3") SEAL REPAIR KIT (2" X 1") LOCK RING (2") CYLINDER BARREL (2") FLG BOLT (1/2-NC X 1-3/4", GD8) CYLINDER PISTON (2" X 1") CYLINDER HEAD (2" X 1") CYLINDER ROD (1")

INCLUDES REF NO.'S 1 THRU 7

SEE FOOTNOTE 1

U-SEAL INSTALLER (1" - 1.499") WIPER INSTALLER (1") WIPER/SEAL INSTALLER (2") PISTON INSTALLER (2") CYL HEAD SPANNER - TWO PIN

FOOTNOTES

1. APPLY LOCTITIE 271 OR 277. TORQUE TO 90-100 FT-LBS (120-135 N.M.)

NOTE:

C

806-686

HYDRAULIC CYLINDER 2.5" ID BARREL X 1.25" OD ROD X 3.0" STROKE

2

1 3 4

5

6

7

D

806-531

HYDRAULIC CYLINDER 2.5" ID BARREL X 1.25" OD ROD X 3.0" STROKE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

149-111 190-166 150-779 152-075 106-097 150-776 150-773 150-415

NOT SHOWN: 259-100 259-236 259-242 259-243 259-188

QTY

1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CYLINDER (2.5" X 1.25" X 3") SEAL REPAIR KIT (2.5" X 1.25") LOCK RING (2.5") CYLINDER BARREL FLG BOLT (5/8-NC X 1-3/4",GD8) CYLINDER PISTON (2.5" X 1.25") CYLINDER HEAD CYLINDER ROD

INCLUDES REF NO.'S 1 THRU 7

SEE FOOTNOTE 1

U-SEAL INSTALLER (1" - 1.499") WIPER INSTALLER (1.25") PISTON SEAL INSTALLER (2.5") PISTON INSTALLER (2.5") CYL HEAD SPANNER - TWO PIN

FOOTNOTES

1. CLEAN & DRY THREADS. APPLY LOCTITE 271 OR 277. TORQUE TO 180-200 FT-LBS (245-270 N.M.)

NOTE:

D

806-531

NOTES:

ID0134963

ELECTRICAL

ID0135070

ELECTRICAL DIAGRAM

FUEL SOLENOID

HT25

WHT (5B)

2

3

RED (3B)

SUMITOMO: HOUSING:6195-0003 TERMINAL:8240-4952 <2> SEAL:7165-0119<2>

GRN (17)

GLOW PLUGS

1 4 5 6

WATER TEMP SENDER

7

MAIN

TAN/BLU (14)

OIL PRESS SENDER

RED (2)

BLK/RED (1A)

STARTER SOLENOID

GLOW PLUGS

HORN WHT/BLU (8)

RED (2) PUR (19)

WHT/GRN (9)

S B M

GND

BLK (1)

RED (2)

ORG (3)

ALTERNATOR

K

FUEL GAUGE

8

(15)

7

4

5

6 2

I GS

3

1

1 8

8

BRN (22) BLK/BLU (1B) ORG (3)

ORG (3)

GLOW PLUG SWITCH

BLOWER MOTOR

ORG/BLU (6) BLK/RED (1A)

AUX

1

ORG/BLU (6)

RED (4)

B

A

ROTO WITCH

PLUG

BLK (1)

PLUG

PLUG

CAVITY

CAVITY

CAVITY

11

IGN

IGNITION SWITCH

17

ORG (3)

TAN/BLU (14) ORG/BLU (6)

WHT/ORG (10) WHT/RED (11)

E.O.P. HORN WARNING BUTTON LIGHT ORG

19

{3} WHT/GRN {10}

10

CAB HARNESS

BLK ORG/BLU (1) BLK/RED (1A) (6) ORG/BLU (6)

WHT (5)

ST

9

CAVITY PLUG CAVITY PLUG CAVITY CAVITY PLUG PLUG

B A

BAT

WHT (5B)

BLK/BLU (1B)

2

BLK/YEL (18) BLK/RED (1A) ORG/BLU (6) RED (4)

ACC

HOUR METER

BLK/RED (1A)

A B

4

7

GND

RED/BLK (15)

BLU/RED (21) BLK BRN BLK (12) (12) (3) BRN BLU BLU (20) (1) (1)

A B

18

3 2

RT. TRACK NEUTRAL SWITCH

B A

17 22

6 5

ATTACHMENT SOLENOID A B

LT. TRACK NEUTRAL SWITCH

H ATTACHMENT SWITC RED/BL

BLK/BLU (1B)

16

STARTER

GND 23

BLK/RED (1A)

SEAT SWITCH

BRN (22)

ORG {3} WHT/BLU {9}

TO FUEL SENDER

E.W.T. WARNING LIGHT

21

13

12

(6) WHT/BLK ORG/BLU (7) RED (4) 30 85

A B C D E F

F E D C B A

CAVITY WHT/ORG PLUG (10) WHT/RED WHT/ORG (11) (10) WHT/BLU (12) WHT/GRN (13)

20

OPERATOR CROWD ATTACH.

(10) (10) WHT/ORG WHT/ORG (3) ORG WHT/GRN WHT/GRN WHT/BLU BLU/WHT BLU/WHT (12) BLU (9) BLU/RED (13) (20) (20) (21) (16)

(1A) BLK/RED

8 7A

30 86

85

87 A

86

3 5

3 5

2 4 1

2 4 1

(1A) BLK/RED WHT BLK/YEL (5) PUR GRN (18) BLK/RED (19) (17) (1A) 87

START

3 5

2 4 1

3 5

2 4

1

GLOW PLUGS

BLK/RED WHT/BLU BLK/RED BLK/RED (1A) (8) ORG (1A) (1A) RED/BLK (3) WHT/BLU WHT/BLU (12) (12) (15)

LIGHT HOUR ATTACH RT. TRACK LT. TRACK TEST METER NEUTRAL NEUTRAL NEUTRAL

WHT (5) WHT/BLK (7) RED (3B) BLK/BLU (1B) ORG (3) CAVITY PLUG

INTERLOCK DISPLAY\MODULE

3 5

2 4 1

87

RED (2) RED (2)

14

RED (4)

30AMP

BLU (16)

40AMP

ORG/BLU (6)

15AMP

15AMP

MAIN GLOW PLUGS ACC IGN

ORG (3) ORG/BLU (6)

11

ORG (3)

15

ID0030828

ELECTRICAL DIAGRAM HT25

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

214-508 194-383 213-306 217-953 192-006 306-609 217-952 213-338 215-242 217-453 215-133 215-415 215-128 214-301 217-750 217-826 217-710 217-813 217-811 214-575 306-607 306-608 214-852 214-961 214-962 217-071 214-563 217-245 214-747 214-745 194-382

QTY

DESCRIPTION

1 3 1 1 1 1 1 1 1 1 1 1 2 5 1 1 2 2 2 1

FRAME/ENGINE HARNESS GLOW PLUG STOP SOLENIOD STOP SOLENIOD HIGH FREQUENCY HORN HIGH FREQUENCY HORN OIL PRESSURE SWITCH TEMPERATURE SWITCH TEMPERATURE SWITCH ALTERNATOR FUEL GAUGE NITE-LIGHT KIT (12V DC) HOUR METER ACCESSORY SOCKET SEAT SWITCH MINI RELAY (SPDT) MICRO RELAY (SPDT) FUSE (ATC, 30 AMP) FUSE (ATC, 15 AMP) PROXIMITY SWITCH HORN BUTTON BUTTON COVER IGNITION SWITCH KEY, PAIR SWITCH MOUNTING NUT RED PILOT LIGHT RED LED 12V INTERLOCK MODULE FUEL SENDER ROCKER SWITCH W/LOCK STARTER

2 2 1 1 1 1

REMARKS

FOOTNOTE 1 BEGINS WITH S/N: FOOTNOTE 2 ENDS WITH S/N: OBSOLETE BEGINS WITH S/N ENDS WITH S/N:

OBSOLETE

NOT SHOWN:

FOOTNOTES:

1. TEIR 2 SOLENOID WITH 2 WIRE CONNECTOR. 2. TEIR 1 SOLENOID WITH 3 WIRE CONNECTOR.

NOTE:

11

ID0030828

NOTES:

ID0134963

DIGGING COMPONENTS

PIVOT 26

11

12

10 13 16 5 6 1

4 9

8 7

24 3

25 17

24

2

21 18

20

25

2 14 15 19

25 16 23 22 16

SEE FOOTNOTE 2

12

ID0051964

PIVOT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

QTY

100-100 1 100-099 1 140-688 1 115-003 2 149-272 1 105-696 2 115-779 AR 116-761 1 319-151 1 107-441 1 180-824 1 142-127 1 140-696 1 106-117 8 178-348 1 125-057 1 110-432 1 106-685 14 106-338 1 110-433 1 106-632 4 306-625 1 107-693 1 363-686 1 106-706 2 106-547 6 106-397 8 178-393 1

DESCRIPTION

CNV KIT- OFFSET TO CENTERLINE CNV KIT-WIDE CENTER TO CENTERLINE PIVOT (4", 6" & 8") ZERK (1/4-NF, STR) INTERNAL SEAL (3.500") THRUST WASHER (3.587") FRICTION WASHER (2.840") INTERNAL SNAP RING (3.333") DIRT SHIELD RUBBER WASHER (2.06"X2.5"X.25") HEADSHAFT SPROCKET HUB SPROCKET (2.000" A12, SPLIT) BACKING RING SCREW (M12-1.75 X 80mm) SPACER BALL BEARING (1.750") FLANGETTE LOCKNUT (M12-1.75,PRV TRQ. 10.9) SCREW (M16-2.00 X 30mm) FLANGETTE FLG LK SCREW (M12-1.75 X 35mm,SEC) OUTBOARD BEARING ARM WASHER (5/8") OUTBOARD BEARING MOUNT PLATE FLG LK NUT (M12-1.75) SCREW (M12-1.75 x 40mm, 10.9) WASHER (M12, HARDENED) SPACER

REMARKS

INCLUDES REF # 1,2,14-20,22-24 AND 26. SEE FOOTNOTE 3.

INCLUDES REF # 1,2 AND 16. SEE FOOTNOTE 4.

SEE FOOTNOTE 1.

SEE FOOTNOTE 5.

NOT SHOWN:

FOOTNOTES:

1.

2.

3.

4.

5.

USE ONLY ONE IF SPACE DOES NOT ALLOW FOR TWO. PLUG THESE HOLES WHEN NOT IN USE. USE 106-806 & 106-709 IN TOP HOLES. USE 106-806 IN BOTTOM HOLES. ALSO INCLUDES 107-441, 141-454, 166-220, 141-471, 106-752 AND 141-509. FOR MORE INFORMATION SEE PART PAGE 806-696 AND 807-300.

ALSO INCLUDES 141-454 AND 141-509. FOR MORE INFORMATION SEE PART PAGE 806-696.

USE 242 LOCTITE

NOTE:

12

ID0051964

PIVOT 10", 12" & 16" 10 14 12

9 13 5 6 4

16

11

8 7

19 2

23

1

19

26 25

3 3

21

23

15

22 17 24 23 13 20 18 13

SEE FOOTNOTE 2

R

807-180

PIVOT 10", 12" & 16" REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

QTY

100-199 1 100-098 1 303-258 1 149-272 1 115-003 2 105-696 2 107-441 1 115-779 1 116-761 1 319-151 1 178-393 1 106-117 8 178-348 1 142-127 1 106-685 14 140-696 1 110-433 1 180-824 1 110-432 1 363-686 1 106-547 6 106-706 2 306-625 1 125-057 1 106-397 6 106-632 4 107-693 1 106-338 1

DESCRIPTION

REMARKS

CNV KIT-OFFSET TO WIDE CENTER CNV KIT-CENTERLINE TO WIDE CENTER PIVOT (10", 12" & 16") INTERNAL SEAL (3.500") ZERK (1/4-NF, STR) THRUST WASHER (3.587") RUBBER WASHER (2.06 X 2.5 X .25) FRICTION WASHER (2.840") INTERNAL SNAP RING (3.333") DIRT SHIELD SPACER SCREW (M12-1.75 X 80mm) SPACER SPROCKET (2.000"-A12, SPLIT) LOCKNUT (M12-1.75, PRV TRQ, 10.9) BACKING RING FLANGETTE SPROCKET HUB FLANGETTE OUTBOARD BEARING MOUNT PLATE SCREW (M12-1.75 X 40mm, 10.9) FLG LK NUT (M12-1.75) OUTBOARD BEARING ARM BALL BEARING (1.750") WASHER (M12, HARDENED) FLG LK SCREW (M12-1.75 X 35mm,SER) WASHER (5/8") SCREW (M16-2.00 X 30mm)

INCLUDES REF # 1,3,5,9,13,15,17-22,24 &25.SEE FT 3.

INCLUDES REF # 1,3, & 13. SEE FOOTNOTE 4.

SEE FOOTNOTE 1.

SEE FOOTNOTE 5.

FOOTNOTES

1.

2.

3.

4.

5.

USE ONLY ONE IF SPACE DOES NOT ALLOW FOR TWO. PLUG THESE HOLES WHEN NOT IN USED. USE 106-806 & 106-709 IN TOP HOLES. USE 106-806 IN BOTTOM HOLES. KIT ALSO INCLUDES 141-426,166-220,141-471,106-752 & 141-502. FOR MORE INFORMATION SEE PART PAGES 806-696 AND 807-301.

KIT ALSO INCLUDES 141-426 & 141-502. FOR MORE INFORMATION SEE PART PAGE 806-696.

USE 242 LOCTITE

NOTE:

R

807-180

OFFSET PIVOT

4

17 9

12 19

14

15

26 29 30 28

16

10

27

26

18

27 SEE FOOTNOTE 3

11

24

31

13

21 11

24 25 2

25

22 8

22 20

6

7

4 5

3 1

3

R

22

807-179

OFFSET PIVOT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

QTY

DESCRIPTION

100-200 1 CNV KIT-TO OFFSET 141-444 1 OUTER PIVOT 180-001 1 SLEEVE 141-450 1 BEARING CAP 141-804 1 BEARING CAP 125-194 2 BALL BEARING (1.750", HEX) 115-527 1 INTERNAL SNAP RING (3.938") 140-696 1 BACKING RING 142-127 1 SPROCKET (2.000" A12, SPLIT) 180-824 1 SPROCKET HUB 115-779 1 FRICTION WASHER (2.840") 307-346 1 STACY FLAP PLATE 141-449 1 OUTBOARD BEARING SUPPORT 141-803 1 OUTBOARD BEARING SUPPORT 116-761 1 INTERNAL SNAP RING (3.333") 106-338 1 SCREW (M16-2.00 X 30mm) 105-696 2 THRUST WASHER (3.587") 141-440 1 INNER PIVOT 149-272 1 INTERNAL SEAL (3.500") 178-187 1 DIRT SHIELD 115-003 1 ZERK (1/4-NF, STR) 106-607 3 SCREW (M20-2.50 X 50mm, 10.9) 106-665 3 LOCKNUT (M20-2.50, 10.9) 106-117 8 SCREW (M12-1.75 X 80mm) 106-685 14 LOCKNUT (M12-1.75, PRV TRQ, 10.9) 105-799 3 FLG LK SCREW (M10-1.50 X 25mm) 106-547 8 SCREW (M12-1.75 X 40mm, 10.9) 106-397 8 WASHER (M12, HARDENED) 106-383 2 FLG LK SCREW (M10-1.50 X 30mm) 106-387 5 FLG LOCKNUT (M10-1.50) 301-975 - DIGGING ATTACHMENT FRAME 178-194 1 STACY FLAP MOUNT 116-956 1 STACY FLAP 107-693 1 WASHER (5/8")

REMARKS

INCLU. REF #1,3-5,10,11,15,18-20,22-24,26,27,29 & 30.

SEE FOOTNOTE 1.

SEE FOOTNOTE 2.

SEE FOOTNOTE 1.

FOOTNOTES

1. USE SILICONE FOR JOINT. 2. USE ONLY ONE IF SPACE DOES NOT ALLOW FOR TWO. 3. USE 106-806 & 106-709 IN TOP HOLES WHEN NOT IN USED. USE 106-806 IN BOTTOM HOLES WHEN NOT IN USED. 4. CONVER. KIT ALSO INCLUDES 141-459,141-460,106-335,178-338,106-700,166-287,141-438,141-503 AND 106-547.

FOR MORE INFORMATION SEE PART PAGES 806-696 & 807-302.

NOTE:

R

807-179

PIVOT STUB 4

2

10

1

1

9 6 5 8 4

8 7 6

11 13 5

7

12

9

13

14

1 18

16

17 3 15 15

14

ID0086498

PIVOT STUB REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

306-498 141-609 141-536 302-919 328-633 141-651 107-118 106-442 125-620 318-773 106-685 106-632 140-688 140-654 140-707 180-062 125-209 180-448 115-165 105-313 115-003

QTY

DESCRIPTION

1 PIVOT STUB (2') 1 PIVOT STUB (3') 1 PIVOT STUB (3') 1 PIVOT STUB (3') 1 CLAMP PLATE - 50K BOOM 4 SCREW (M16-2.00 X 160mm) 4 FLG LKNUT (M16-2.0,PRVTRQ10.9) 2 FLANGE BEARING (1.750", 4-BLT) 2 BEARING BRACKET 4 LOCKNUT (M12-1.75, PRV TRQ, 10.9) 4 FLG LK SCR (M12-1.75X35MM,SER) - PIVOT (4", 6" & 8") 1 IDLER SPROCKET (2.000" A9) 1 SPROCKET (2.00" A9) 2 DIRT SHIELD 1 TAPERED BEARING/RACE (1.250") 1 IDLER SHAFT (1.250" X 3.500") 1 PLUG (08N, SOC) 1 IDLER NUT (1-1/4 NF) 1 ZERK (1/4-NF, STR.)

REMARKS

USE WITH 141-612, 141-613, 141-656 & 141-657 INCL REF NO.'S 11, 21 AND 23. PARTS ONLY USE WITH 141-536 INCL REF NO'S 11, 21 AND 23.

SEE FOOTNOTE 2

INCL REF NO'S 12 THRU 14.

SEE FOOTNOTE 1.

INCL REF NO'S 16 & 18.

NOT SHOWN:

FOOTNOTES:

1.

2.

FOR BEARING DRIVER REFER TO SPECIAL TOOL DIAGRAM 052-519.

ORDER PARTS IN PAIRS WHEN REPLACING 110-363, 110-364 AND 125-048.

NOTE:

14

ID0086498

3' SMALL TAIL BOOM

1 3

4 5

6 8 7 14

7 9

2

8 7

7

10 12 11

12

06

13

ID0125754

3' SMALL TAIL BOOM REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

141-543 141-547 141-611 141-541 141-546 141-616 151-053 159-093 115-019 115-276 115-165 180-448 115-009 115-165 105-313 140-765 141-597 140-654 140-707 180-062 125-209 140-021

QTY

DESCRIPTION

REMARKS

1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 2 1 2 1 1

BOOM 3' STS BOOM 45" STS BOOM 48" STS 3' SMALL TAIL SPROCKET BOOM 45" SMALL TAIL SPROCKET BOOM 48" SMALL TAIL SPROCKET BOOM CYL. (1.5" X 1.5" X 8.375") RELIEF VALVE (5/8-NF, O2N) ZERK (02N) REDUCER (16N-08NF) PLUG (08N, SOC) IDLER SHAFT (1.250" X 3.500") ZERK (1/4-NF, STR, XL) PLUG (08N, SOC) IDLER NUT (1-1/4-NF) SLIDE AND STOP SLIDE AND STOP IDLER SPROCKET (2.000" A9) SPROCKET (2.00" A9) DIRT SHIELD TAPERED BEARING/RACE (1.250") BOOM SPRING

INCLUDES REF. NO.'S 1 THRU 18 INCLUDES REF. NO.'S 1 THRU 19 INCLUDES REF. NO.'S 1 THRU 19

USE WITH 48" BOOM INCLUDES REF. NO.'S 11 THRU 13

NOT SHOWN:

FOOTNOTES:

NOTE:

06

ID0125754

WEAR BAR BOOM 2'

9

8 13

10 14

7

4 11

6

3

5

3 4 6

1

7

6

4

12 3

3 4 6

M

2

806-707

WEAR BAR BOOM 2' REF PART NO. NUMBER 141-404 141-405 141-733 1.

141-409 2.

141-467 141-736 3.

125-209 4.

180-062 5.

140-698 6.

180-448 115-009 115-165 7.

105-313 8.

141-395 9.

115-019 10.

115-165 11.

151-053 12.

141-406 141-737 13.

159-093 14.

115-276

QTY 1 1 1 1 1 1 2 2 1 1 1 2 1 1 1 2 1 1 1 1 1

DESCRIPTION 50K ROLLER BOOM 50K SPROCKET BOOM 50K SPROCKET BOOM 50K TAIL ROLLER 50K TAIL SPROCKET 50K TAIL SPROCKET TAPERED BRNG/RACE (1.250") DIRT SHIELD 50K TAIL ROLLER IDLER SHAFT (1.25" X 3.50") ZERK (1/4-NF, STR XL) PLUG (08N, SOC) IDLER NUT (1-1/4-NF) 50K BOOM ZERK (02N) PLUG (08N, SOC) CYL (1.5" X 1.5" X 8.375") 50K TAIL SPROCKET 50K TAIL SPROCKET RELIEF VALVE (5/8-NF, 02N) REDUCER (16N-08NF)

REMARKS INCL REF NO'S 1, 3 THRU 11.

OBSOLETTE INCL REF NO'S 2, 3, 4 & 6 THRU 12.

INCL REF NO'S 2, 3, 4 & 6 THRU 12.

INCL REF NO'S 3 THRU 5.

OBSOLETTE INCL REF NO'S 3, 4 & 12.

INCL REF NO'S 3, 4 & 12.

OBSOLETTE

FOOTNOTES

NOTE:

M

806-707

TRENCH CLEANER 2' & 3'

14 7

8

5 1

13

20 7 8

11

21

23 6 10

2

12

9 20 21

3

22 4

19 18 17 16 15

06

ID0112228

TRENCH CLEANER 2' & 3'

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

100-047 141-426 141-618 141-388 307-721 141-527 141-526 183-179 115-503 115-1018 106-335 106-685 107-590 105-071 141-510 141-134 141-135 141-136 141-137 141-139 105-884 115-0005 141-459 141-215

QTY

DESCRIPTION

MECHANICAL CLEANER CONV KIT 1 CLEANER MOUNT 1 CLEANER BAR 48" 1 CLEANER BAR 2' 1 CLEANER BAR 3' 1 REAR LINK 1 FRONT LINK 4 PIN 8 KLIP RING (.750") 2 EXTENSION SPRING 1 SCREW (M12-1.75 X 70MM) 3 LOCKNUT(M12-1.75,PRV TRQ,10.9) 2 CARRAGE BOLT (M12-1.75 X 80MM) 2 WASHER (1/2") 1 SHOE BEAM 1 CLEANER SHOE (6") 1 CLEANER SHOE (8") 1 CLEANER SHOE (10") 1 12" CLEANER SHOE 1 CLEANER SHOE (16") 4 WASHER (1/2") 4 EXTERNAL SNAP RING (0.500") 1 RESTRAINT BAR 1 CLEANER SHOE (4")

REMARKS

INCLUDES REF NO.'S 5-14 & DANGER DECALS. SEE FOOTNOTE 1 SEE FOOTNOTE 3 SEE FOOTNOTE 6 SEE FOOTNOTE 6 SEE FOOTNOTE 6 SEE FOOTNOTE 6

SEE FOOTNOTES 5 & 6

SEE FOOTNOTE 6 SEE FOOTNOTE 6 SEE FOOTNOTE 4

NOT SHOWN:

275-230 275-232 141-454

1 DANGER STRIPE 1.75" X 18" 1 DANGER 1.75" X 18" 1 CLEANER SUPPORT

SEE FOOTNOTE 2

FOOTNOTES:

1. REFER TO INSTALLATION DIAGRAM 050-926.

2. 141-454 CLEANER SUPPORT USED WITH 140-688 PIVOT 4", 6" & 8".

3. CLEANER MOUNT 141-426 USED WITH 303-258 PIVOT 10", 12" & 16".

4. RESTRAINT BAR USED WITH 141-444 OUTER PIVOT. 5. INSTALL SPRING 115-1018 SO THAT OPEN ENDS OF THE COILS ARE FACING IN TOWARDS THE CLEANER BAR AND SHOE BEAM. 6. IF REPLACING SPRING 117-008 OR 115-602 WITH SPRING 115-1018 ALSO REPLACE CLEANER BAR AND REAR LINK, AND USE WASHERS 105-884 AND SNAP RINGS 115-0005.

NOTE:

06

ID0112228

DIGGING CHAIN ADAPTERS 50K 2P 2.000" PITCH

7

1

6

2

8

11 5 4

3 9

01

10

ID0139275

DIGGING CHAIN ADAPTERS 50K 2P 2.000" PITCH REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

QTY

135-925 AR 105-275 AR 105-065 AR 105-076 AR 135-912 AR 135-913 AR 135-914 AR 135-950 AR 135-924 AR 105-002 AR 105-111 AR

DESCRIPTION

REMARKS

LEFT DIGGING TOOTH BOLT (1/2-NC X 6") LOCKNUT (1/2-NC) BOLT (1/2-NC X 3") TOOTH ADAPTER (8") TOOTH ADAPTER (12") TOOTH ADAPTER (16") TOOTH ADAPTER (10") RIGHT DIGGING TOOTH BOLT (1/2-NC X 2-1/4") BOLT (1/2-NC X 4")

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0139275

DIGGING CHAIN 50K 2P 2 PITCH SPACING - RAISED RIVET

8

7

10 5

9

2

11 4

13 12

11 3

6 1

C

807-192

DIGGING CHAIN 50K 2P 2 PITCH SPACING - RAISED RIVET REF PART NO. NUMBER 1.

105-043 105-066 105-002 105-076 105-111 2.

105-065 3.

135-351 4.

135-358 5.

135-952 6.

135-964 7.

135-924 8.

135-925 9.

138-203 10.

131-098 131-135 11.

138-370 12.

136-031 13.

136-043

QTY AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR

NOT SHOWN 259-140

CHAIN JAWS (1-1/8" DRIVE)

DESCRIPTION BOLT (1/2-NC X 1-1/4") BOLT (1/2-NC X 1-3/4") BOLT (1/2-NC X 2-1/4") BOLT (1/2-NC X 3") BOLT (1/2-NC X 4") LOCKNUT (1/2-NC) DIG CHAIN PIN (50K) LOCK KEY (3/32 X ") CHAIN SPACER (1.781") TOOTH SPACER (1/4") LEFT DIGGING TOOTH RIGHT DIGGING TOOTH ROLLER LINK (50K) DIG CHAIN 50K 2P (10' 8") 64P DIG CHAIN - 2P (10' 8") MASTER LINK KIT-TOOTH(50K) CHAIN SPACER (.650") SPACER

REMARKS

OBSOLETE LESS TEETH INCLUDE REF. NO.'S 3,4, AND 11

FOOTNOTES

NOTE: FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE (050-700), REFER TO BOOM, CHAIN AND CLEANER OPTIONS (052-190) FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

C

807-192

DIG CHAIN 2P50K2PS RR

5 10 9 7

12

8

11

2 4

13 3

14 1

6

16 15

05

ID0093102

DIG CHAIN 2P50K2PS RR REF PART NO. NUMBER

QTY

DESCRIPTION

1. 105-043 AR BOLT (1/2-NC X 1-1/4") 105-066 AR BOLT (1/2-NC X 1-3/4") 105-136 AR BOLT (1/2-NC X 3-1/2", GD8) 105-111 AR BOLT (1/2-NC X 4") 2. 105-065 AR LOCKNUT (1/2-NC) 3. 135-351 AR DIG CHAIN PIN (50K) 4. 135-358 AR LOCK KEY (3/32" X 1/2") 5. 135-952 AR CHAIN SPACER 6. 135-964 AR TOOTH SPACER (1/4") 7. 136-135 AR LEFT DIGGING TOOTH-CUP 135-1233 AR DURATOOTH, LEFT 1/4 50K 135-1234 AR DURATOOTH C2X, LEFT 1/4 50K 8. 136-136 AR RIGHT DIGGING TOOTH-CUP 135-1236 AR DURATOOTH, RIGHT 1/4 50K 135-1237 AR DURATOOTH C2X, RIGHT 1/4 50K 9. 136-137 AR L.H. 2.000 VEE 10. 136-138 AR R.H. 2.000 VEE 11. 138-203 AR ROLLER LINK (50K) 12. 138-215 AR 12' DIG CHAIN (2 P) 138-216 AR 4' DIG CHAIN (4 P) 138-217 AR 2' DIG CHAIN (2 P) 138-218 AR 11'4" CHAIN (68 P) 138-219 AR 2'8" DIG CHAIN (6 P) 13. 138-352 AR TOOTH SIDEBAR 138-370 AR MASTER LINK KIT-TOOTH(50K) 14. 138-353 AR TOOTH SIDEBAR-HEAD (50K) 138-370 AR MASTER LINK KIT-TOOTH (50K) 15. 136-031 AR CHAIN SPACER (.650") 16. 136-032 AR CHAIN SPACER (1.200")

REMARKS

OBSOLETE

OBSOLETE

OBSOLETE OBSOLETE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH KEY SIDE INCL REF NO'S 3,4,13, AND 14 HEAD SIDE INCL REF NO'S 3,4,13, AND 14

NOT SHOWN: 259-140 CHAIN JAWS (1-1/8" DRIVE)

NOT SHOWN:

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE (050-700). REFER TO BOOM, CHAIN AND CLEANER OPTIONS (052-190) FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

NOTE:

05

ID0093102

DIGGING CHAIN (2P 50K 4PS) 4 PITCH SPACING-RAISED RIVET

9 6

2 10 5 1 13

7

8 11

14 12 4 14 3

01

ID0140953

DIGGING CHAIN (2P 50K 4PS) 4 PITCH SPACING-RAISED RIVET REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

QTY

105-043 AR 105-066 AR 105-002 AR 105-076 AR 105-111 AR 105-065 AR 135-351 AR 135-358 AR 135-964 AR 135-952 AR 136-032 AR 135-924 AR 135-925 AR 136-031 AR 138-380 AR 138-203 AR 131-099 AR 138-370 AR

DESCRIPTION

BOLT (1/2-NC 1-1/4") BOLT (1/2-NC X 1-3/4") BOLT (1/2-NC X 2-1/4") BOLT (1/2-NC X 3") BOLT (1/2-NC X 4") LOCKNUT (1/2-NC) DIG CHAIN PIN (50K) LOCK KEY (3/32" X 1/2") TOOTH SPACER (1/4") CHAIN SPACER (1.781") CHAIN SPACER (1.200") LEFT DIGGING TOOTH RIGHT DIGGING TOOTH CHAIN SPACER (.650") MASTER LINK KIT-PLAIN (50K) ROLLER LINK (50K) DIG CHAIN 50K 4P (10' 8") 64P MASTER LINK KIT-TOOTH (50K)

REMARKS

INCL REF NO'S 3,4, AND 11 LESS TEETH

NOT SHOWN:

259-140

CHAIN JAWS (1-1/8" DRIVE)

FOOTNOTES:

NOTE:

01

ID0140953

DIG CHAIN 2P50K4PS RR 4 PITCH SPACING-RAISED RIVET

10

9 6

18 11 2

7

5

16

1 8

17

15 13

14 12 4

3

03

ID0139093

DIG CHAIN 2P50K4PS RR 4 PITCH SPACING-RAISED RIVET REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

QTY

105-043 AR 105-066 AR 105-067 AR 105-082 AR 105-229 AR 105-065 AR 135-351 AR 135-358 AR 135-964 AR 135-952 AR 135-912 AR 135-950 AR 135-913 AR 135-914 AR 135-924 AR 135-1233 AR 135-1234 AR 135-925 AR 135-1236 AR 135-1237 AR 136-137 AR 136-138 AR 138-203 AR 138-210 AR 138-211 AR 138-212 AR 138-213 AR 138-214 AR 138-370 AR 138-380 AR 136-031 AR 136-032 AR 105-002 AR 105-076 AR 105-111 AR 105-275 AR

DESCRIPTION

BOLT (1/2-NC 1-1/4") BOLT (1/2-NC X 1-3/4") BOLT (1/2-NC X 2-3/4") BOLT (1/2-NC X 2-1/2") BOLT (1/2-NC X 2") LOCKNUT (1/2-NC) DIG CHAIN PIN (50K) LOCK KEY (3/32" X 1/2") TOOTH SPACER (1/4") CHAIN SPACER TOOTH ADAPTER (8") TOOTH ADAPTER (10") TOOTH ADAPTER (12") TOOTH ADAPTER (16") LEFT DIGGING TOOTH DURATOOTH, LEFT 1/4 50K DURATOOTH C2X, LEFT 1/4 50K RIGHT DIGGING TOOTH DURATOOTH, RIGHT 1/4 50K DURATOOTH C2X, RIGHT 1/4 50K LH 2.000 VEE TEETH RH 2.000 VEE TEETH ROLLER LINK (50K) DIG CHAIN - 4P (2' 0") DIG CHAIN - 4P (2' 8") DIG CHAIN - 4P (4' 0") DIG CHAIN - 4P (11' 4") DIG CHAIN - 4P (12' 0") MASTER LINK KIT-TOOTH (50K) MASTER LINK KIT-TOOTH (50K) CHAIN SPACER (.650") CHAIN SPACER (1.200") BOLT (1/2-NC 2-1/4") BOLT (1/2-NC X 3") BOLT (1/2-NC X 4") BOLT (1/2-NC X 6")

REMARKS

OBSOLETE

OBSOLETE

OBSOLETE OBSOLETE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH INCL REF NO'S 3, 4 AND 15

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0139093

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

NOTES:

ID0134963

ACCESSORIES

HEATER KIT HT25

7

11 12

8 OUT

9 9

6

IN 5

10

10

13 9

SEE DETAIL A

2 3 9 4 1

CUT HERE

DETAIL A

03

ID0070224

HEATER KIT HT25

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

QTY

101-044 1 194-034 500-2333 149-980 1 514-158 1 116-750 1 116-857 514-146 1 302-697 116-750 1 110-026 4 110-353 2 194-158 1 106-161 4 106-385 4

DESCRIPTION

HEATER KIT ENGINE-KUBOTA DIESEL GASKET, KUBOTA (ENGINE TO MANIFOLD) CONNECTOR (O6N-08SF) S/O COUPLER (08S-10H) BULK HOSE (5/8", SOLD PER 1') OUTLET HOSE S/O BR TEE (10H-16H-16H) RADIATOR/OIL COOLER BULK HOSE (5/8", SOLD PER 1') WORM CLAMP (1/2" TO 1-1/4") WORM CLAMP (3/4" TO 1-1/2") HEATER UNIT FLG LK SCREW (M6-1.00 X 20mm) FLG LOCKNUT (M6-1.00)

REMARKS

USE 78" SEE FOOTNOTE 1

USE 50"

NOT SHOWN:

FOOTNOTES:

1. TO INSTALL 514-146, CUT 116-857 AND THEN SPLICE IN 514-146 WITH BOTH PIECES OF 116-857.

NOTE:

03

ID0070224

WORK LIGHT KIT

1 2 2

1 4

3

02

ID0139706

WORK LIGHT KIT REF PART NO. NUMBER

QTY

101-047 1 214-646 4 107-405 16 217-762 1 362-823 1

1.

2.

3.

4.

DESCRIPTION

WORKING LIGHT KIT WORK LIGHT 100FO CLIP NUTS (#6-32) ROCKER SWITCH (SPDT) COVER

REMARKS

SCREWS COME WITH WORK LIIGHT

NOT SHOWN:

214-726 214-727 217-826

1 1 3

LIGHT KIT HARNESS ROPS HARNESS RELAY

FOOTNOTES:

NOTE:

02

ID0139706

NOTES:

ID0134963

BACKHOE ATTACHMENTS

ID0135023

FRAME

1

7

12

8 11

5

9

6

2

3 4

10

E

807-286

FRAME REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

QTY

305-459 1 115-704 1 106-098 2 151-208 152-086 321-942 2 106-478 4 106-383 4 106-616 12 106-709 6 106-109 AR 107-565 6 116-105 1

DESCRIPTION

VALVE MOUNT BULK EDGE (1/4", SOLD PER 1") FLG BOLT (3/4-NC X 2", GD8) CYL (2.5" X 1.5" X 5.77") CYL (2.5" X 1.5" X 5.77") MOUNT PLATE SCREW (M16-2.00 X 40mm, 10.9) FLG LK SCREW (M10-1.50 X 30mm) SCREW (M16-2.00 X 55mm, 10.9) FLG LK NUT (M12-1.75) WASHER (.780") FLG LK SCREW (M12-1.75 X 40mm) GROMMET EDGE (1/2",SOLD @ 1" )

REMARKS

USE 7"

ENDS WITH S/N: BEGINS WITH S/N:

USE 11"

FOOTNOTES

NOTE:

E

807-286

VALVE MOUNT 1

2

3

4

7

5

8

6

02

ID0069148

VALVE MOUNT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

106-381 105-095 305-459 105-267 149-102 308-770 106-383 105-634

QTY

4 4 4 1 1 4 4

DESCRIPTION

REMARKS

FLG LK SCREW (M8-1.25 X 25MM) WASHER (1/4") VALVE MOUNT CUP WASHER (5/16") HYD CONTROL VALVE (4SPL BCKH) COVER PLATE FLG LK SCREW (M10-1.50 X 30MM) NUTSERT (M10-1.50)

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0069148

BOOM SWING HYDRAULICS

3

2 1

2

3

4

03

ID0046011

BOOM SWING HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

514-018 149-915 154-278 151-208 152-086

QTY

DESCRIPTION

2 1 1

CONNECTOR (04O-06S, ORF) HOSE (04OFX-30"-3000 AR) CONNECTOR (04S-04O) CYL (2.5" X 1.5" X 5.77") CYL (2.5" X 1.5" X 5.77")

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS

03

ID0046011

DIPPER HYDRAULICS

4 4

3

3

1

2

1

01

ID0139707

DIPPER HYDRAULICS REF PART NO. NUMBER

QTY

DESCRIPTION

1.

2.

3.

4.

2 1 2 2

COMPOSITION BUSHING (1.25") CYL (2" X 1.25" X 14") CONNECTOR (04S-04O90) HOSE (04OFX90-13"-3000 AR)

125-771 151-210 154-252 149-912

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS

01

ID0139707

HYDRAULIC CYLINDER 2" ID BARREL X 1.25" OD ROD X 14" STROKE

2

1 3 4 5

6

7

B

807-345

HYDRAULIC CYLINDER 2" ID BARREL X 1.25" OD ROD X 14" STROKE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

151-210 190-169 150-778 152-077 106-097 150-771 150-770 150-719

NOT SHOWN: 259-100 259-236 259-239 259-241 259-188

QTY

DESCRIPTION

REMARKS

INCLUDES REF NO.'S 1 THRU 7

1 1 1 1 1 1 1

CYL (2.0" X 1.25" X 14") SEAL REPAIR KIT (2" x1.25") LOCK RING (2") CYLINDER BARREL FLG BOLT (5/8-NC X 1-3/4", GD8) CYLINDER PISTON (2.0" X 1.25") CYLINDER HEAD (2.0" X 1.25") CYLINDER ROD

SEE FOOTNOTE 1 INCLUDES MOLDED-ON WEAR RING

U-SEAL INSTALLER (1" - 1.499") WIPER INSTALLER (1.25") WIPER/SEAL INSTALLER (2") PISTON INSTALLER (2") CYLINDER HEAD SPANNER - TWO PIN

FOOTNOTES

1. APPLY LOCTITE 271 OR 277. TORQUE TO 180-200 FT-LBS (245-270 N.M.)

NOTE:

B

807-345

SWING CYLINDER

1 16

3

15

4

2 5

7

6 12

8 9

11 13 10

14 20 17

18

19

15

B

21

DETAIL B 16

06

ID0045895

SWING CYLINDER REF PART NO. NUMBER

QTY

152-086 150-713 158-202 157-539 157-542 157-021 500-031 152-544 159-992 115-648 125-775 157-535 157-019 107-359 150-712 105-357 106-111 158-561 110-264 159-988 158-203 153-221

2 2 2 2 2 2 1 2 2 1 1 1 1 1 6 3 2 2 2 2 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

DESCRIPTION

CYL (2.5" X 1.5" X 5.77") CYLINDER ROD CYLINDER GLAND WIPER SEAL (1.500") U-SEAL (1.500") BACKUP RING (228 D90) O-RING (228 D90) BARREL SWING CUSHION COMPRESSION SPRING WEAR RING BACKUP RING (139 D90) O-RING (139 D90) STUD BOLT PISTON LOCKNUT (5/8-NC) TIE ROD (5/8-NC X 19.100") RELIEF CARTRIDGE EXPANDER PLUG (.275") METERING PLUG (.025 ORF) PLUG (03S) CAPLUG (04S, PLASTIC)

REMARKS

INCL REF NO'S 1 THRU 21; SEE FOOTNOTE 1, 2 & 3 TORQUE TO 290-325 FT LBS

TORQUE TO 100 FT LBS

NOT SHOWN:

FOOTNOTES:

1. SUPERSEDES 151-208 2. SEAL REPAIR KIT 190-208 TO INCLUDE REF NO'S 3 THRU 6 & 10 THRU 13

NOTE:

1. ALWAYS REPAIR CYLINDER WITH KIT, NOT WITH INDIVIDUAL PARTS. REFER TO INSTRUCTION DIAGRAM 051-181

06

ID0045895

NOTES:

ID0134963

MISCELLANEOUS

ID0135063

SAE Bolt and Nut Torque Value Chart Grade 5: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

12

16

8

11

20

27

5/16

25

34

15

20

45

60

3/8

40

54

25

34

75

100

7/16

65

90

40

55

125

170

1/2

100

135

60

80

190

260

9/16

150

200

90

125

270

370

5/8

200

270

120

165

370

500

3/4

350

475

210

285

650

880

7/8

560

760

340

460

1250

1425

1

840

1140

500

680

1580

2145

1-1/8

1030

1400

320

840

1950

3645

1-1/4

1460

1980

880

1195

2760

3475

Grade 8: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

14

19

10

14

24

33

5/16

30

40

18

25

50

70

3/8

55

73

35

50

90

125

7/16

85

115

50

70

140

190

1/2

130

175

80

110

220

300

9/16

190

260

110

150

310

420

5/8

260

355

160

245

430

585

3/4

450

610

270

365

750

1015

7/8

730

990

440

600

1210

1640

1

1090

1480

650

880

1320

2465

1-1/8

1550

2100

930

1260

2580

3500

1-1/4

2180

2955

1310

1780

3640

4935

*drilled and tapped

Metric Bolt and Cap Screw Torque Values Size

Class 4.8

Class 8.8 and 9.8

Class 10.9

Class 12.9

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

M6

4.8

3.5

6

4.5

9

6.5

11

8.5

13

9.5

17

12

15

11.5

19

14.5

M8

12

8.5

15

11

22

16

28

20

32

24

40

30

37

28

47

35

M10

23

17

29

21

43

32

55

40

63

47

80

60

75

55

95

70

M12

40

29

50

37

75

55

95

70

110

80

140

105

130

95

165

120

M14

63

47

80

60

120

88

150

110

175

130

225

165

205

150

260

190

M16

100

73

125

92

190

140

240

175

275

200

350

225

320

240

400

300

M18

135

100

175

125

260

195

330

250

375

275

475

350

440

325

560

410

M20

190

140

240

180

375

275

475

350

530

400

675

500

625

460

800

580

M22

260

190

330

250

510

375

650

475

725

540

925

675

850

625

1075

800

M24

330

250

425

310

650

475

825

600

925

675

1150

850

1075

800

1350

1000

M27

490

360

625

450

950

700

1200

875

1350

1000

1700

1250

1600

1150

2000

1500

M30

675

490

850

625

1600

950

1650

1200

1850

1350

2300

1700

2150

1600

2700

2000

M33

900

675

1150

850

1750

1300

2200

1650

2500

1850

3150

2350

2900

2150

3700

2750

M36

1150

850

1450

1075

2250

1650

2850

2100

3200

2350

4050

3000

3750

2750

4750

3500

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, these should only be tightened to strength of original.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Tighten plastic insert or crimped type steel locknuts to approximately 50% of dry torque indicated on chart.

Apply torque to the nut - not the bolt head. Tighten toothed or serrated type locknuts to full torque value.

LUBRICATED means coated with lubricant. DRY means plain or zinc plated without any type of lubricant.

Hydraulic Cylinder Bolt Torque Chart Bolt Size (inch)

Bolt Part No.

Cylinder Repair Kit Part No.

Torque (ft•lb)

Torque (N•m)

1/2

106-096

190-165

90-100

120-135

5/8

106-097

190-166 & 190-169

180-200

245-270

3/4

106-098

190-167 & 190-170

290-325

395-440

7/8

106-122

190-172 & 190-174

410-640

550-625

1

106-145

190-175 & 190-189

630-700

855-950

1-1/8

106-146

190-177

770-850

1045-1170

As a general rule: •

1/2-inch bolts are used in cylinders with 1-inch rods

•

5/8-inch bolts are used in cylinders with 1 1/4-inch rods

•

3/4-inch bolts are used in cylinders with 1 1/2-inch rods

•

7/8-inch bolts are used in cylinders with 1 3/4-inch rods

•

1-inch bolts are used in cylinders with 2-inch rods (one with 1 3/4-inch)

•

1-1/8-inch bolts are used in cylinders with 2-1/4-inch rods

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and torque to value shown on chart.

SAE & ORS Hydraulic Fitting Replacement O-Ring Chart Fraction Size

Dash Size

SAE (Port Seal O-Ring)

ORS (Face Seal O-Ring)

Thread Size

O-Ring P/N

Thread Size

O-Ring P/N

1/16

1

NA

NA

NA

NA

1/8

2

5/16 - 24

NA

NA

NA

3/16

3

3/8 - 24

NA

NA

NA

1/4

4

7/16 - 20

155-760

9/16 - 18

157-037

5/16

5

1/2 - 20

NA

NA

NA

3/8

6

9/16 - 18

155-705

11/16 - 16

157-038

1/2

8

3/4 -16

155-706

13/16 - 16

157-039

5/8

10

7/8 - 14

155-707

1 - 14

157-040

3/4

12

1-1/16 - 12

155-709

1-3/16 - 12

157-017

7/8

14

1-3/16 - 12

155-747

NA

NA

1

16

1-5/16 - 12

155-748

1-7/16 - 12

155-714

1-1/4

20

1-5/8 - 12

155-702

1-11/16 - 12

NA

1-1/2

24

1-7/8 - 12

157-001

2 -12

NA

2

32

2-1/2 - 12

NA

NA

NA

2-1/2

40

3 - 12

NA

NA

NA

3

48

3-1/2 - 12

NA

NA

NA

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current CMW part numbered o-ring, or dash size does not occur in current CMW applications SAE = straight thread fitting that seals by sandwiching a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORS = o-ring face seal; a type of fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface

HT25 - A225 Related Publications Component

Ass’y

P/N

Model: HT25 HT25 ..................... Parts Manual ................................................................... .............. 053-496 HT25 ..................... Operators Manual ............................................................ .............. 054-062 HT25 ..................... Repair Guide (Service Manual) ....................................... .................. N/A HT25 ..................... Supplementary Maint Guide - Trencher .......................... .............. 050-633 HT25 ..................... Digging Chain Guide (6 Volumes) ................................... .............. 050-700 HT25 ..................... Special Tools Guide ........................................................ .............. 052-901 A225 A225 ...................... Parts Manual ................................................................... .............. 053-496 A225 ...................... Operators Manual ............................................................ .............. 054-062 A225 ...................... Repair Guide (Service Manual) ....................................... .................. N/A A225 ...................... Supplementary Maint Guide - Trencher .......................... .............. 050-633 A225 ...................... Special Tools Guide ........................................................ .............. 052-901 Engine: Kubota 25 hp .......... Parts Manual - D1105B-1 ........................................ 194-034 ...... 053-082 Kubota ................... Operators Manual - D1105B-1 ........................................ .............. 054-051 Kubota ................... Service (Shop) Manual - D1105B-1 ................................ .............. 055-051

Filters Engine: Air Filter Parts Ass’y ......................................................................................................... 194-093 Element (primary) ............................................................................................ 194-038 Element (secondary) ........................................................................................ 194-039 Oil Filter Element (spin-on) - Kubota (D1105B-1) ............................................................ 194-041 Fuel Filter (05H-05H, in-line) ............................................................................................ 155-941 Fuel Filter Element (spin-on) - Kubota (D1105B-1) ......................................................... 194-386 Hydraulic: Oil Filter Element (1-UNF, spin-on) ................................................................................. 149-412

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ............................................ 190-051 O-ring Repair Kit - Field Service (46 different O-rings) .................................................... 190-052

VER. 02

ID0252520

Parts Manual Change Request (Please print clearly)

Date: _______________________

Dealer No. (required): _____________________________

Your Name: _____________________________ Phone: _________________

Position: _____________________________

Fax: _________________

E-mail: __________________

Publication Information: Parts Manual No.: _____-_____

Model: __________

Illustration Part No.: Manual Page No.: 1. _____-_____ .......................................................... 1. __________ 2. _____-_____ .......................................................... 2. __________ 3. _____-_____ .......................................................... 3. __________ Nature of Change Request:

 Text

 Graphics

 Missing Information

Describe change requested (if possible, include copy of publication page with changes marked.): ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ Please fax completed form to Parts Manual Department (580) 572-3525 Thank you for taking the time to submit this request. We will contact you if further information is needed to process your request.

ID0135001

ID0040564

ID0135281