Ditch Witch H853 Parts Manual 053-2565 - PDF DOWNLOAD

H853 Parts Manual

Issue 7

053-2565

1

H853 ISSUE NO. 07PL-09/23 For Replacement Copy Order P/N 053-2565

This manual contains information concerning the following models: H853

Copyright 2012, 2013, 2014, 2018, 2019, 2022, 2023 by The Charles Machine Works, Inc. , Ditch Witch, AutoCrowd, Roto Witch, and CMW are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY ______________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy July 2019

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse (including, but not limited to, rollover), abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 07

ID0134872

5

CONTENTS _______________________ Decals

Accessories

Location....................................................... 8

Cable Guide – 2 Post ROPS ........................... 68 Cable Guide – 4 Post ROPS ........................... 66 Cable Guide ............................................... 62 Chains – 110K 2P Alligator ............................. 92 Chains – 110K 2P Duratooth Group 1 .............. 82 Chains – 110K 2P Duratooth Group 2 .............. 84 Chains – 110K 2P Duratooth Group 3 .............. 88 Chains – 110K 2P Duratooth Group 4 .............. 90 Chains – 70K 2P Alligator............................... 80 Chains – 70K 2P Combo ................................ 86 Chains – 70K 2P Duratooth ............................ 78 HD Sod Cutter ........................................... 60 Pipe Puller ................................................. 64 Pivot Mount, Left ...................................... 72 Pivot Mount, Right .................................... 70 Pivot .......................................................... 74 Plow Blades ............................................... 58 Proximity Switch ....................................... 76

Plow Attachment Auger & Sprocket ...................................... 24 Lower Plow Arm/Swing Post ..................... 14 Personnel Restraint ................................... 22 Selector Valve ........................................... 12 Stow Lock .................................................. 20 Upper Plow Arm ........................................ 16 Vibrator Steering ....................................... 18

Assembly Drawings Attachment Frame .................................... 28 Skid Shoe/Sod Cutter ................................ 34 Vibrator Housing ....................................... 30 Vibrator Weights ....................................... 32

Hydraulics Blade Steer Hydraulics .............................. 38 Cylinder – 3.0” x 1.5” ................................... 54 Cylinder – 3.0” x 1.5” x 2.0”........................... 48 Cylinder – 3.0” x 1.5” x 10.0” ......................... 52 Cylinder – 3.5” x 1.75” x 11.0” ....................... 50 Pivot Lift Hydraulics .................................. 46 Plow Lift Hydraulics ................................... 40 Plow Swing Hydraulics .............................. 42 Vibrator Drive Hydraulics .......................... 44

Miscellaneous Torque Information................................... 96 Replacement O-Ring Chart ..................... 101 Warranty Registration............................. 104

ID0300222

6

7

DECALS

8

DECAL LOCATION H853 9

11

10

12

13 3

2

1

14

7 3 14

4

6

15 2

14 7

14 1

4 5 8

03

ID0296629

9

DECAL LOCATION H853 REF PART NO. NUMBER

270-8030 1 270-7902 2 700-193 3 700-002 4 275-231 5 275-023 6 270-7947 7 700-217 8 270-5126 9 700-176 10 700-188 11 700-189 12 700-190 13 270-5132 14 274-318 15 270-7944

QTY

2 2 2 2 1 1 2 1 1 1 1 1 1 4 1

DESCRIPTION

H853 GRAY SERVICE DECAL KIT ISO H853 GRAY MODEL ID WARNING CRUSHING WEIGHT ISO DANGER CHAIN & AUGER ISO DANGER STRIPE 2.75” X 18” OIL LEVEL CHAIN TENSION ISO WARNING MOVING PARTS ISO AMPLITUDE CHART RAISE/LOWER DIGGING BOOM PLOW RAISE/LOWER/FLOAT PLOW STEER L/R PLOW SWING L/R & FLOAT COMBO SELECT TIE DOWN LOCATION ATTACHMENT LOCK/UNLOCK

REMARKS

SEE FOOTNOTE #2

SEE FOOTNOTE #1 SEE FOOTNOTE #1 SEE FOOTNOTE #1 SEE FOOTNOTE #1 SEE FOOTNOTE #1

FOOTNOTES 1. NOT PART OF KIT. 2. NOT PART OF KIT. PART OF RESTRAINT BAR KIT.

03

ID0296629

10

NOTES:

11

PLOW ATTACHMENTS

12

SELECTOR VALVE H853

13 8

9 14

12 11

15

18

10

7

16

6

5 4 1

17 3

2

02

ID0281877

13

SELECTOR VALVE H853

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

159-649 106-382 106-052 110-102 115-477 105-1645 105-213 323-120 116-921 110-439 110-149 105-523 110-150 105-832 105-197 106-198 301-3117 105-095

QTY

1 4 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

SELECTOR VALVE FLG LK SCREW (M10-1.50 X 20MM) BOLT (3/8-NF X 1-7/8", GD8) ROD END (3/8-NF, FM) GRIP RING (.375") TIE ROD (90DEG, 16 IN, 3/8 DIA.) NUT (5/16-NF) BELL CRANK HANDLE HANDLE (3/8-NC, BLACK) CLEVIS (5/16-NF, FM) COTTER PIN (.125" X .750") CLEVIS PIN (5/16" X 1") FLG LOCKNUT (1/4-NC) BOLT (1/4-NC X 1") FLG LOCKNUT (1/2-NC, GD8) SENSOR PLATE WASHER (1/4")

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0281877

14

LOWER PLOW ARM / SWING POST H832/H853

9 21

12

3 2

13

16 9 4 8

11 10

18 11

9 1

9

18

6 5 14 7

20

19 12 15

10 9

05

15

14

17

ID0275236

15

LOWER PLOW ARM / SWING POST H832/H853 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

301-2143 301-2301 301-2358 301-2183 301-2359 301-2362 177-1064 110-168 106-471 105-952 125-754 125-421 125-438 125-486 149-967 125-538 105-1630 105-416 107-009 125-1088 301-2360

QTY

1 1 1 1 1 1 1 2 7 3 2 6 1 2 2 2 1 2 1 2 1

DESCRIPTION

LOWER PLOW ARM HYBRID SWING POST PIN (1.75" X 6.00") TAB PIN (1.75" X 4.50") PIN (1.75" X 8.50") TAB PIN (2.00" X 6.25") PIN MACHINERY BUSHING (2.000") FLG SCREW (M16-2.00 X 30MM) WASHER (.640") COMPOSITION BUSHING (2") CLEVITE BUSHING COMPOSITION BUSHING (1.75") COMPOSITION BUSHING (2.000") INTERNAL SEAL COMPOSITION BUSHING (1.5") SHLD BLT (M16 X 15MM, M12-1.75) WASHER (5/8"ID, 2-1/4"OD, 1/4"TH) FLG LK SCREW (M12-1.75 X 25MM) COMPOSITION BUSHING (1.75") WASHER (.640"), 2 FLAT

REMARKS

USE AS REQUIRED USE LOCTITE 277 OR EQUIVALENT

USE LOCTITE 277 OR EQUIVALENT

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0275236

16

UPPER PLOW ARM H832/H853

30

2 9

3

4

1 17

5 34 33 32 35

31

20

8

39

18

9

19 3

38 8

18 28 37

13

12

13

40 10 4

11

6

9

41

12

4 5

30

25 21

23

7 20

23

41

14 22

40 4 10

15

05

26

24

29 14

27

16

19

18

22

ID0275256

17

UPPER PLOW ARM H832/H853 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 38 39 40 41

301-2197 301-2187 105-1012 105-416 106-470 301-2185 125-538 105-1591 106-386 165-974 166-520 106-998 106-266 301-2189 301-3003 301-3004 106-331 105-894 110-270 305-256 183-882 110-054 116-520 106-471 181-975 105-1625 301-3393 107-661 107-002 125-545 106-124 105-069 125-770 145-906 105-118 315-753 110-359 105-271 106-398 106-340

QTY

1 1 2 4 2 1 2 4 8 2 1 2 2 2 1 1 3 5 6 3 1 2 2 1 1 1 1 2 2 4 1 1 1 1 1 2 2 2 2 2

DESCRIPTION

UPPER ARM TAB PIN (1.50 "X 6.12") FLG LK SCREW (M12-1.75 X 20MM) WASHER (5/8"ID, 2-1/4"OD, 1/4"TH) FLG SCREW (M16-2.0 X 40MM) TAB PIN (1.50' X 5.10") COMPOSITION BUSHING (1.5") STOP BUMPER FLG LOCKNUT (M8-1.25) KEY (1/4" X 1-1/2") TORSION MOUNT FLG LK SCREW (M10-1.50 X 70MM) FLG NUT (M10-1.50) SIDE BRACKET LEFT SWING ARM RIGHT SWING ARM SCREW (M10-1.50 X 50MM, CL8.8) LOCKNUT(M10-1.50, CL 10, PRV TRQ) BOLT-ON CLAMP (9/16", HALF) BACKUP SPACER TAPERED PIN (1.75" X 9.00") MACHINE BUSHING (1-3/4", 14GA) WASHER (M46, RUBBER) FLG SCREW (M16-2.00 X 30MM) TAPERED INSERT (1.75") STOP BUMPER HOSE CLAMP BRACKET FLG LKNUT (M10-1.50, PRV TRQ CL10) FLG LK SCREW (M10-1.50 X 30MM, NLK) MACH BUSHING (18GA, 1-1/2") SCREW (M10-1.50 X 110MM, CL 8.8) WASHER (13/32" ID, 1-17/32" OD, 7GA) COMPOSITION BUSHING (1.000") PIVOT TUBE WASHER (3/8", TYPE A WIDE) BACK UP-PLATE BOLT-ON CLAMP (1-1/2", SET) SCREW (M10-1.50 X 40MM, CL 8.8) WASHER (M16, HARDENED) SCREW (M16-2.00 X 50MM. CL 8.8)

REMARKS

USE LOCTITE 277 OR EQUIVALENT

USE LOCTITE 277 OR EQUIVALENT

USE AS REQUIRED

USE LOCTITE 277 OR EQUIVALENT

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0275256

18

VIBRATOR STEERING H832/H853

9 8

3 1

8

3 7

4

11 11

4

3 2

5

14 21 19 18

8

6 20

13 12 10

16

17 15 16

02

ID0275727

19

VIBRATOR STEERING H832/H853 REF PART NO. NUMBER

QTY

1 301-2190 2 301-2876 3 126-131 4 115-001 5 115-017 6 115-002 7 105-505 8 125-538 9 178-779 10 178-780 11 107-745 12 310-919 13 110-220 14 116-519 15 310-921 16 107-009 17 116-520 18 125-773 19 110-895 20 105-416 21 106-471

1 1 4 4 1 1 2 4 1 1 2 2 2 4 2 3 4 2 4 2 2

DESCRIPTION

REMARKS

UPPER CLEVIS DEEP DROP LOWER CLEVIS THRUST BUSHING SET (1.5") ZERK (02N) ZERK (02N65) ZERK (02N90) ROLL PIN (1/4" X 2-1/2") COMPOSITION BUSHING (1.5") CLEVIS PIN (2.00" X 9.36") CLEVIS PIN (2.00" X 9.16") CASTLE NUT (1-1/2-NF) PIN MACH BUSHING (1-1/2", 14GA) WASHER (M40, RUBBER) PIN FLG LK SCREW (M12-1.75 X 25MM) WASHER (M46, RUBBER) COMPOSITION BUSHING (1.75") MACHINERY BUSHING (1.750") WASHER (5/8") FLG SCREW (M16-2.00 X 30MM)

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0275727

20

STOW LOCK H832/H853

2

1

5

4 8

5 4 3

7

7

6

9

01

ID0275660

21

STOW LOCK H832/H853 REF PART NO. NUMBER

QTY

1 179-860 2 110-377 3 105-065 4 105-884 5 116-403 6 179-790 7 115-511 8 301-3002 9 115-584

1 STOW LOCK HANDLE 1 KNOB (1/2-NC, BLUE) 2 LOCKNUT (1/2-NC) 2 WASHER (1/2") 2 FRICTION WASHER (.560") 1 STOW LOCK PIN 2 KLIP RING (1.50") 1 STOW LOCK 1 TORSION SPRING

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0275660

22

PERSONNEL RESTRAINT H853

4

10

9 13 12

14 11

10 6 8 3

5

7

02

6

2

15

1

ID0281887

23

PERSONNEL RESTRAINT H853

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1 LEFT AUGER BRACKET 1 RIGHT AUGER BRACKET 1 BOOM TUBE (62P - 51") 1 WEAR PLATE 1 ROCK GUARD 12 FLG LOCKNUT (3/4-NC) 4 BOLT(3/4-NC X 1 3/4") 10 BOLT (3/4-NC X 5") 12 SCREW (M20-2.50 X 220MM, 10.9) 24 WASHER (M20, HARDENED) 12 LOCKNUT (M20-2.50, 10.9) 2 WASHER 2 SCREW (M20-2.50 X 100MM, 10.9) 2 SPIRAL PIN (1/2 X 1-1/2) 1 RESTRAINT BAR (62P)

141-521 141-520 140-1128 316-866 143-022 105-340 105-499 105-473 106-493 106-399 106-665 105-422 106-610 107-808 141-264

DESCRIPTION

REMARKS

SEE NOT SHOWN SECTION

NOT SHOWN:

141-265 141-266

1 1

RESTRAINT BAR (70P) RESTRAINT BAR (78P)

FOOTNOTES:

NOTE:

02

ID0281887

24

AUGER & SPROCKET H853

1 2 13

15

10

16

7 15

11

11

14

3

12

9 8 12

9 7

14 16

4

10

13 5

6

01

ID0281919

25

AUGER & SPROCKET H853

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 AUGER DRIVE SPROCKET ASS'Y 1 DOUBLE AUGER SHAFT 1 LEFT AUGER 1 R.H. QUARTER AUGER ASSEMBLY 1 RIGHT AUGER 1 LEFT AUGER 2 FLANGE BEARING (1.750", 4-BLT) 2 ZERK GUARD 4 GUARD BUSHING (.562") 10 MACHINERY BUSHING (2.25") 4 FLG LK BOLT (1/2-NC X 1-1/2") 4 BOLT (1/2-NC X 2-1/2") 8 FLG LOCKNUT (1/2-NC) 2 ZERK (02N) 2 LOCKNUT (3/4-NC) 2 BOLT (3/4-NC X 5")

140-665 145-244 145-071 145-311 145-109 145-110 125-620 143-021 184-076 110-211 105-831 105-082 105-833 115-001 105-953 105-473

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0281919

26

NOTES:

27

ASSEMBLY DRAWINGS

28

ATTACHMENT FRAME H853

16 18

17

15 13 12

14 1

3

2 9 9 8 7

10 8 8

8 8 4 3

02

6

5 11

11

11

ID0281924

29

ATTACHMENT FRAME H853

REF PART NO. NUMBER

QTY

1 301-2377 2 107-336 3 106-355 4 184-840 5 107-598 6 106-398 7 301-2681 8 106-488 9 106-750 10 107-152 11 106-587 12 118-152 13 106-632 14 106-709 15 110-259 16 107-001 17 106-266 18 259-042

1 ATTACHMENT FRAME 16 FLG SCREW (M16-2.00X45MM,10.9) 10 FLG NUT (M16-2.00, 10.9) 2 SPACER 2 SCREW (M16 X 60MM 10.9) 2 WASHER (M16, HARDENED) 2 DRAWBAR PLATE 12 WASHER (M24, HARDENED) 4 SCREW (M24-3.00 X 60MM, 10.9) 2 SCREW (M24-3.00 X 80MM, 10.9) 6 LOCKNUT (M24-3.0,PRV TRQ,10.9) 1 SPOILS FLAP 3 FLG LK SCR (M12-1.75X35MM,SER) 3 FLG LK NUT (M12-1.75) 1 BOLT-ON CLAMP (.625") 1 FLG LK SCREW (M10-1.50 X 25MM) 1 FLG NUT (M10-1.50) 1 PLUG WRENCH 1/2" DRIVE

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0281924

30

VIBRATOR HOUSING H832/H853

6

7 8

9

14 15 2

1 6

9

10

5

8

16

7 2 4

3

11 12

3

6

4 6

13

5

10

9 8

01

4

ID0275869

31

VIBRATOR HOUSING H832/H853 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 VIBRATOR 2 COVER PLATE MACHINING 4 DOWEL PIN (3/8" X 1-1/2") 26 FLG NUT (M16-2.00, 10.9) 8 SCREW (M16-2.00 X 70MM) 28 WASHER (M16, HARDENED) 13 SCREW (M16-2.00 X 185MM) 3 PLATE 12 FLG LK SCREW (M12-1.75 X 25MM) 4 BEARING (SPHERICAL ROLLER) 8 SCREW (M8-1.25 X 25MM, SOC) 2 BEARING RETAINER 2 PLUG (16S) 1 SIGHT GAUGE (16S) 1 O-RING (916 D90) 1 PLUG, MAGNETIC (-16S)

301-1872 166-620 105-536 106-355 106-341 106-398 105-744 312-760 106-806 125-526 106-916 315-731 155-138 110-111 155-748 152-150

DESCRIPTION

REMARKS

SEAL WITH SILICONE - REFER TO FOOTNOTE 1

INCLUDES REF #15 INCLUDES REF #15 INCLUDES REF #15

NOT SHOWN:

FOOTNOTES:

1. COVERS, REF. # 2, MUST BE USED IN PAIRS. DO NOT MIX OLD AND NEW COVERS ON VIBRATOR HOUSING. 2. NOT SHOWN: WELD-IN REPLACEMENT UPPER BOSS P/N 301-0766. USE ONLY IN PAIRS.

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

01

ID0275869

32

VIBRATOR WEIGHTS H832/H853

3

3

5

1

4 2

6 8

4

9 7

01

ID0275234

33

VIBRATOR WEIGHTS H832/H853 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

185-506 185-507 165-929 125-526 115-498 185-111 106-619 106-355 106-398

QTY

1 1 4 4 2 4 4 4 4

DESCRIPTION

RIGHT SHAFT ASSEMBLY LEFT SHAFT ASSEMBLY KEY (3/8" X 2-29/64") BEARING (SPHERICAL ROLLER) EXTERNAL SNAP RING (2.165") VIBRATOR WEIGHT SCREW (M16-2.00 X 130MM, 10.9) FLG NUT (M16-2.00, 10.9) WASHER (M16, HARDENED)

REMARKS

TORQUE TO 105 ft. lbs. - USE LOCTITE 680

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0275234

34

SKID SHOE/SOD CUTTER H832/H853

1

2

3

6 4 5

9 8 6 7

03

ID0275299

35

SKID SHOE/SOD CUTTER H832/H853 REF PART NO. NUMBER

QTY

190-1721 2 107-336 3 106-355 4 116-100 5 320-547 6 105-982 7 105-915 8 105-319 9 351-582 10* 331-661

4 4 1 1 2 1 1 1 1

DESCRIPTION

H832 SHIP KIT FLG SCREW (M16-2.00X45MM,10.9) FLG NUT (M16-2.00, 10.9) SHOCK MOUNT SKID SHOE WASHER (2.062") WASHER (.781") BOLT (3/4-NC X 1-1/2") KEY (1/4" X 3-3/4") SOD CUTTER

REMARKS

INCL'S REF #1 THRU #9

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0275299

36

NOTES:

37

HYDRAULICS

38

BLADE STEER HYDRAULICS H853

16

20

17 17

BOOM LIFT

18

2

21

15

1

15 16

11

BLADE LIFT

2

14

4

3

19

13 12

5

6 10 8 7

9

10

7

01

6

ID0282814

39

BLADE STEER HYDRAULICS H853

REF PART NO. NUMBER

QTY

1 157-972 2 106-381 3 155-163 4 154-226 5 154-276 6 151-029 7 154-230 8 153-865 9 153-865 10 154-250 11 159-838 12 159-838 13 117-676 14 154-275 15 117-792 16 515-098 17 515-098 18 301-2364 19 106-386 20 110-442 21 116-941

1 6 1 1 1 2 2 1 1 2 1 1 2 2 2 1 1 1 2 1 1

DESCRIPTION

REMARKS

HYD CONTROL VALVE (4-SPOOL) FLG LK SCREW (M8-1.25 X 25MM) REDUCER (08S-06SF) CONNECTOR (04O-06S90) CONNECTOR (04O-08S90) CYL (3.0 X 1.50 X 10.0) BRANCH TEE (06S-04O-04O) HOSE (04OFX45S-16.5"-3000-WG) HOSE (04OFX45S-16.5"-3000-WG) CONNECTOR (04O-06S45) HOSE (04OFX45-33"-3000) HOSE (04OFX45-33"-3000) ABRASION SLEEVE (1.00" X 30") BK CONNECTOR (04O-04OBK) ABRASION SLEEVE (1.00" X 115"") HOSE (04OFX-110"-3000) HOSE (04OFX-110"-3000) BULKHEAD BRACKET FLG LOCKNUT (M8-1.25) HANDLE (3/8-NC, GREEN) HANDLE (3/8-NC, GREEN)

NOT SHOWN:

FOOTNOTES:

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

01

ID0282814

40

PLOW LIFT HYDRAULICS H853

4,5

8 9 11 10

4,6 4 5

4

9

6 7

2

1 3

4

02

4

ID0281976

41

PLOW LIFT HYDRAULICS H853

REF PART NO. NUMBER

QTY

1 150-3322 2 125-1088 3 125-773 4 154-276 5 154-651 6 515-440 7 117-693 8 157-972 9 106-381 10 153-998 11 153-995

1 CYL (3.5 X 1.75 X 11.0), SP 1 COMPOSITION BUSHING (1.75") 1 COMPOSITION BUSHING (1.75") 4 CONNECTOR (04O-08S90) 1 HOSE (04OFX-66"-3000) 1 HOSE (04OFX-64"-3000) 2 ABRASION SLEEVE (1.00" X 60") 1 HYD CONTROL VALVE (4-SPOOL) 4 FLG LK SCREW (M8-1.25 X 25MM) 1 ORIFICE PLATE (.062) 1 CONNECTOR (08S-08SF)

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

02

ID0281976

42

PLOW SWING HYDRAULICS H853

11

10

15 10 16 12

13

14

14

9 3

6

4

7

8

1

5 10 2 02

ID0281880

43

PLOW SWING HYDRAULICS H853 REF PART NO. NUMBER

QTY

1 150-3418 2 301-2787 3 301-2788 4 125-772 5 125-773 6 105-969 7 181-975 8 125-545 9 118-021 10 154-226 12 159-838 13 153-317 14 117-411 15* 155-163 16 154-276

1 1 1 1 1 1 1 2 2 3 1 1 2 1 1

DESCRIPTION

CYL (3.0 X 1.50 X 2.0) TAPERED PIN (1.750" X 8.50") PIN (1.50" X 3.850") COMPOSITION BUSHING (1.5") COMPOSITION BUSHING (1.75") FLG BOLT (5/8-NC X 1-1/2",GD8) TAPERED INSERT (1.75") MACH BUSHING (18GA, 1-1/2") EXTERNAL SNAP RING (1.500") CONNECTOR (04O-06S90) HOSE (04OFX45-33"-3000) HOSE (04OFX45-35"-3000) ABRASION SLEEVE (1.00" X 32") REDUCER (08S-06SF) CONNECTOR (04O-08S90)

REMARKS

USE LOCTITE 277 OR EQUIVALENT

NOT SHOWN:

FOOTNOTES:

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

02

ID0281880

44

VIBRATOR DRIVE HYDRAULICS H853

TO TOP PORT ON PUMP

10

TO BOTTOM PORT ON PUMP

14

13

34

15 29

12

24

21

27 26

20 22

31 33 32 30

23 28

25

11 19

6 8

5

A 4

9

B 18

A B

7

17

4 16 3

1

2

03

ID0282756

45

VIBRATOR DRIVE HYDRAULICS H853

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

1 HYD PISTON MOTOR, 3.97cir / 65cc 2 FLG LK SCREW (M12-1.75 X 25MM) 4 CAM WASHER (1/2") 4 CONNECTOR (12S-16O) 1 CONNECTOR (08O-12S) 1 HOSE (08OFX-102"-3000) 1 HOSE (16OFX-100"-4000) 1 HOSE (16OFX-100"-4000) 2 ABRASION SLEEVE (2.07" X 102") 2 CONNECTOR (16S-16O45) 86 SPIRAL WRAP (1.5",SOLD PER FT) 1 SELECTOR VALVE 2 CONNECTOR (16S-16O) 1 RELIEF VLV CARTRIDGE(2500 PSI) 1 BK RUN TEE (08O-08O-08OBK) 1 HYDRAULIC MOTOR 1 CONNECTOR (06S-08O45) 1 HOSE (08OFX90S-28"-3000) 1 ABRASION SLEEVE (1.25" X 28") 2 CONNECTOR (16S-16O90, XL) 1 HOSE (16OFX-19.5"-6000) 1 HOSE(16OFX-19.5"-6000) 2 ABRASION SLEEVE (2.07" X 16") 2 SCREW (M10-1.50 X 40MM) 3 LOCKNUT(M10-1.50,PRV TRQ,10.9) 2 BOLT-ON CLAMP (1-1/2", SET) 2 BACK UP-PLATE 1 BOLT-ON CLAMP (1") 1 WASHER (3/8") 1 HOSE CLAMP BRACKET 1 COMPOSITION BUSHING (1.000") 1 PIVOT TUBE 1 WASHER (.406") 1 SCREW (M10-1.50 X 110MM)

150-3312 106-806 105-159 154-306 154-234 154-949 515-162 515-162 117-198 154-388 110-930 159-649 154-281 159-612 154-295 150-1038 154-283 154-750 117-396 154-289 150-3708 150-3708 105-1447 105-271 105-894 110-359 315-753 110-333 105-118 301-3393 125-770 145-906 105-069 106-124

DESCRIPTION

REMARKS

REFER TO FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. 2X 154-281 THAT SCREWS INTO SELECTOR VALVE SHOULD BE LEFT OUT UNTIL VALVE (159-649) IS BOLTED ONTO FRAME.

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

03

ID0282756

46

PIVOT LIFT HYDRAULICS H853

10, 7

13 10, 6

RETURN 12 11 SUPPLY 10 10 14

7

P.B

6

8 1 9 5

3 2

1 4 2

03

ID0284184

47

PIVOT LIFT HYDRAULICS H853

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

151-043 154-226 154-265 515-175 515-175 154-783 154-911 117-412 117-611 154-276 153-998 153-995 154-279 154-322

QTY

2 4 2 1 1 1 1 1 1 2 1 1 2 1

DESCRIPTION

CYL (3.0 X 1.50 X 12.0) CONNECTOR (04O-06S90) UNION RUN TEE (04OFX-04O-04O) HOSE (04OFX90-16"-3000) HOSE (04OFX90-16"-3000) HOSE (04OFX-24"-3000) HOSE (04OFX-36"-3000-AR) ABRASION SLEEVE (1" X 34") ABRASION SLEEVE (1.00" X 22") CONNECTOR (04O-08S90) ORIFICE PLATE (.062) CONNECTOR (08S-08SF) CONNECTOR (08O-10S) CONNECTOR (08O-10S90)

REMARKS

REFER TO FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. REFER TO "PIVOT" ID0281406 FOR CYLINDER HARDWARE.

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

03

ID0284184

48

HYDRAULIC CYLINDER (3" X 1.5" X 2.0")

2

11 4

5 6

7 13 8 3 9 12

10

1

01

ID0300008

49

HYDRAULIC CYLINDER (3" X 1.5" X 2.0") REF PART NO. NUMBER

QTY

1 150-3420 2 150-3419 3 150-911 4 150-777 5 125-776 6 157-020 7 157-536 8 155-734 9 155-733 10 157-542 11 106-098 12 157-539 13 150-774

1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CYLINDER ROD (1.50 X 2.0) CYLINDER BARREL (3.0 X 2.0) LOCK RING (3.0) CYLINDER PISTON (3.0 X 1.50) WEAR RING O-RING (230 D90) BACKUP RING (230 D90) O-RING (334 D90) BACKUP RING (334 D90) U-SEAL (1.500") FLG BOLT (3/4-NC X 2", GD8) WIPER SEAL (1.500") CYLINDER HEAD (3.0 X 1.50)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0300008

50

HYDRAULIC CYLINDER (3.5" X 1.75" X 11.0")

90°

1

6 4

14

8

5

12

10 9

3

11

13

7 2

01

ID0299984

51

HYDRAULIC CYLINDER (3.5" X 1.75" X 11.0") REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

150-3322 150-3321 150-3504 149-302 149-301 125-784 106-122 150-761 157-554 157-030 157-032 157-550 157-031 157-549 105-363

QTY

DESCRIPTION

REMARKS

- HYDRAULIC CYLINDER (3.5" X 1.75" XX.0") SP 1 SPECIAL BARREL (3.50 X 11.0) 1 CYLINDER ROD (1.75 X 11.0) 1 LOCK RING (3.5) 1 CYLINDER PISTON (3.5 X 1.75) 1 WEAR RING 1 BOLT (7/8-NC X 2-1/4", GD8) 1 CYLINDER HEAD (3.5 x 1.75) 1 BACKUP RING (234 D90) 1 O-RING (338 D90) 1 BACKUP RING (338 D90) 1 U-SEAL (1.750") 1 O-RING (234 D90) 1 WIPER SEAL (1.750") 1 WASHER (7/8")

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0299984

52

HYDRAULIC CYLINDER 3" x 1 • 5" X 10"

\

3

53

HYDRAULIC CYLINDER 3" X 1.5" X 10"

REF NO, 1.

2.

3.

4.

5.

5.

7.

PART NUMBER QTY DESCRIPTION 151-029 CYLINDER 13.0 11 X 1.50 11 X 10.0 11 11 X 1.50 11 190-157 S EAL REPAIR K IT 13.0 11 150-911 1 L □CK RI NG I 3 l CYLINDER BARREL 150-284 105-098 FLG BDLT I 3/4-NC X 2 11 GD8 l 150-777 1 CYLINDER PISTON 150-774 CYLINDER HEAD 150-415 CYLINDER ROD )

-

-

-

-

-

-

-

-

-

-

D

-

-

-

-

FOOTNOTE 1

-

U- S EAL INSTALLER 11.5" - UP) ROD WIPER IN STALLER 11.5 11 PISTON S EAL INS TALLER 13 1 - - P (ST □N - IN-ST ALLER- 13 11 1 - CYLINDER HEAD SPANNER - TWO PIN )

1)

FOOTNOTES 1.TORQUE T D 290-325 F T-LBS 1395-440 N.Ml -

S EE

,

NOT SHOWN: 259-040 259-237 259-055 259-055 259-188

-

REMARKS

)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

801-078

54

HYDRAULIC CYLINDERS (3.0" X 1.5")

1

6 11 13

12

5

7 8 4 9 10

3

2

02

ID0015860

55

HYDRAULIC CYLINDERS (3.0" X 1.5") REF PART NO. NUMBER

QTY

1 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

CYL (3.0 X 1.5 X 2.5) CYLINDER BARREL (3.0 X 2.5) CYLINDER ROD (1.50 X 2.5) CYL (3.0 X 1.5 X 3.0) CYLINDER BARREL (3.0 X 3.0) CYLINDER ROD (1.50 X 3.0) CYL (3.0 X 1.5 X 4.0) CYLINDER BARREL (3.0 X 4.0) CYLINDER ROD (1.50 X 4.0) CYL (3.0 X 1.5 X 5.0) CYLINDER BARREL (3.0 X 5.0) CYLINDER ROD (1.50 X 5.0) CYL (3.0 X 1.5 X 6.0) CYLINDER BARREL (3.0 X 6.0) CYLINDER ROD (1.50 X 6.0) CYL (3.0 X 1.5 X 8.0) CYLINDER BARREL (3.0 X 8.0) CYLINDER ROD (1.50 X 8.0) CYL (3.0 X 1.5 X 10.0) CYLINDER BARREL (3.0 X 10.0) CYLINDER ROD (1.50 X 10.0) CYL (3.0 X 1.5 X 12.0) CYLINDER BARREL (3.0 X 12.0) CYLINDER ROD (1.50 X 12.0) CYL (3.0 X 1.5 X 16.0) CYLINDER BARREL (3.0 X 16.0) CYLINDER ROD (1.50 X 16.0) CYL (3.0 X 1.5 X 20.0) CYLINDER BARREL (3.0 X 20.0) CYLINDER ROD (1.50 X 20.0)

3 4 5 6 7 8 9 10 11 12 13

150-774 150-911 150-777 106-098 155-734 155-733 157-542 157-539 125-776 157-536 157-020

1 1 1 1 1 1 1 1 1 1 1

CYLINDER HEAD (3.0 X 1.50) LOCK RING (3.0) CYLINDER PISTON (3.0 X 1.50) FLG BOLT (3/4-NC X 2", GD8) O-RING (334 D90) BACKUP RING (334 D90) U-SEAL (1.500") WIPER SEAL (1.500") WEAR RING BACKUP RING (230 D90) O-RING (230 D90)

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

REMARKS

DESCRIPTION

149-682 149-804 149-731 151-049 150-299 150-431 151-054 152-004 150-434 151-179 152-068 153-038 151-086 152-008 153-003 151-136 152-014 153-027 151-029 150-284 150-416 151-043 150-293 150-426 151-034 150-288 150-419 151-117 152-054 150-669

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

.

SEE FOOTNOTE 3

NOT SHOWN:

259-040 259-237 259-065 259-066 259-188

U-SEAL INSTALLER (1.5" - UP) ROD WIPER INSTALLER (1.5") PISTON SEAL INSTALLER (3") PISTON INSTALLER (3") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. REF. #1 & #2 ARE SPECIFIC TO EACH CYLINDER, REF. #3 THRU #13 ARE COMMON FOR ALL THE ABOVE LISTED CYLINDERS. 2. SEAL REPAIR KIT P/N: 190-167 3. APPLY LOCTITE 277 OR EQIVALENT, TORQUE TO 290-325 FT-LBS NOTE:

02

ID0015860

56

NOTES:

57

ACCESSORIES

58

PLOW BLADES H853

10

11 6

12

8

9

3 10

4

12

5 8

11

11 7

8 4 3 10 12

2

01

1

ID0281337

59

PLOW BLADES H853

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12

1 FEED BLADE (28/32/36 X 1.5 X 7.5R) 1 BULLET BLADE (1" X 3" X 24") 2 LK BOLT (3/4-NC X 1-1/4", NLK) 2 WASHER (3/4") 1 PIN (2.00" X 5.50") 2 PLOW BLADE PIN 1 PLOW BLADE PIN 6 TENSION BUSHING (2.375) 2 PLOW PIN SPACER 6 CASTLE NUT (1-1/2-NF) 6 WASHER (1-1/2") 6 COTTER PIN (.250 X 3.000)

185-281 185-345 105-379 105-423 178-347 179-738 185-1100 178-345 179-961 106-067 105-446 105-514

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

190-1745

H1032 SHIP KIT

CABLE GUIDE: 185-351 185-355 185-354 185-353 185-352

1.5" X 7" X 36" 2" X 10" X 30" 1.5" X 9" X 30" 1" X 9" X 30" 2" X 10" X 36"

BULLET BLADES: 185-346 185-356 185-357

1" X 3" X 30" 1" X 3" X 22"/26"/30" 1" X 3" X 28"/32"/36"

FEED BLADES: 185-329 185-332 185-333 185-334 185-335 185-283 185-284 185-285 185-306 185-311 185-315 185-316 185-305 185-310

2" X 6.63" X 36" 2" X 10" X 30" 1.5" X 6.63" 30" 1" X 7.38" X 30" 1.5" X 6.63" X 36" 1.5" X 7.5"RX 28"/32"/36" 2" X 10"R X 28"/32"/36" 2" X 10"R X 28" X 32" X 36" 1" X 9"R X 22"/24"/30" 1.5" X 9"R X 22"/26"/30" 2" X 10"R X 22"/26"/30" 2" X 10"R X 22"/26"/30" 2" X 9"R X 22"/26"/30" 1.5" X 9"R X 22"/26"/30"

SEE FOOTNOTE 1

FOOTNOTES:

1. KIT #190-1745 IS REQUIRED AND MUST BE USED AT ALL TIMES, EVEN IF A PLOW IS NOT ATTACHED TO THE TWO FRONT MOUNTING HOLES.

NOTE:

01

ID0281337

60

HD SOD CUTTER

H832, H853, VP120H AND VP120Q

5

1

2

6

4

3

01

7

ID0677946

61

HD SOD CUTTER

H832, H853, VP120H AND VP120Q REF PART NO. NUMBER

1 2 3 4 5 6 7

190-3037 302-5576 106-341 106-442 107-336 106-355 106-398 302-6005

QTY

DESCRIPTION

HD SOD CUTTER 1 WELDMENT, SOD CUTTER 3 SCREW (M16-2.00 X 70MM) 3 FLG LKNUT (M16-2.0,PRVTRQ10.9) 4 FLG SCREW (M16-2.00X45MM,10.9) 4 FLG NUT (M16-2.00, 10.9) 3 WASHER (M16, HARDENED) 2 PLATE, SLIDE PLATE

REMARKS

INCLUDES ALL ITEMS BELOW

ADJUST TO OVERLAP REAR MOUNT PLOW BLADE

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0677946

62

CABLE GUIDE

H732, H752, H932, H952, H1032, H1052

9

10

11 12 2

1

4 7

6 5 3

8

08

ID0055286

63

CABLE GUIDE

H732, H752, H932, H952, H1032, H1052 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

QTY

DESCRIPTION

191-489 CABLE GUIDE KIT 318-884 1 CABLE GUIDE 185-541 1 CABLE GUIDE 184-453 7 SPACER TUBE 107-520 7 PIN (.375" X 3.75") 110-033 7 HAIR CLIP PIN (1/8" X 1/2") 117-207 7 SPRING 106-391 4 WASHER (M12) 106-333 4 SCREW (M12-1.75 X 40mm, 8.8) 106-354 4 FLANGE NUT (M12-1.75) 105-827 4 FLG LK BOLT (3/8-NC X 1-1/4") 105-874 4 FLG LK BOLT (3/8-NC X 1-1/2") 105-081 4 BOLT (3/8-NC X 3-1/4") 309-952 1 ROPS CABLE GUIDE 181-075 4 SLEEVE 105-814 4 FLG LOCKNUT (3/8-NC)

REMARKS

INCL. REF #'S 1-12 & SEE FOOTNOTE 2 OBSOLETE, SEE FOOTNOTE 2

OBSOLETE, SEE FOOTNOTE 1 FOR HT115 ONLY;

SEE FOOTNOTE 1

FOR HT115 ONLY;

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1- USE LOCTITE 242 OR EQUIVALENT. 2- KIT 191-182 HAS BEEN REPLACED BY KIT 191-489, REF #1.

CABLE GUIDE 185-541.

318-884 HAS BEEN REPLACED BY

NOTE:

08

ID0055286

64

PIPE PULLER .625" - 1.250"

1

2

3

02

ID0139361

65

PIPE PULLER .625" - 1.250" REF PART NO. NUMBER

QTY

1.

2.

3.

1 1 1

368-290 107-113 107-114

DESCRIPTION

PIPE PULLER (.625" TO 1.250") NUT (#12-24) EYE BOLT (#12-24 X 1-1/2")

REMARKS

INCLUDES REFERENCE NUMBERS 2 AND 3 INCLUDES REFERENCE NUMBER 2

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0139361

66

CABLE GUIDE 4-POST ROPS RT80Q T3, T4

FOOTNOTE 2 5"

1 2 11 FOOTNOTE 3 4 13

7

8 6

12

5 10 9

3

10

03

9

ID0290620

67

CABLE GUIDE 4-POST ROPS RT80Q T3, T4 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13

190-1999 319-667 105-239 105-003 185-541 184-453 107-520 117-207 110-033 106-496 106-709 105-069 105-117 301-3412

QTY

DESCRIPTION

- CABLE GUIDE, 4-POST ROPS 1 4-POST CABLE GUIDE 4 BOLT (5/16-NC X 4-1/2") 4 FLG LOCKNUT (5/16-NC) 1 CABLE GUIDE 4 SPACER TUBE 4 PIN (.375" X 3.75") 4 COMPRESSION SPRING 4 HAIR CLIP PIN (1/8" X 1/2") 4 FLG SCREW (M12-1.75 X 35MM) 4 FLG LK NUT (M12-1.75) 4 WASHER (.406") 4 WASHER (5/16") 2 CLAMP BAR

REMARKS

REFER TO FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. SPRING, 117-207, IS A PRESS FIT ON CLIP PIN, INSTALL WITH SMALL END OF SPRING AGAINST HEAD OF CLIP PIN (107-520).

2. CABLE GUIDE SHOULD FIT APPROXIMATELY 5" FROM BACK OF THE THROAT OPENING TO EDGE OF CANOPY. AND SHOULD BE CENTER OVER SIDE TUBES IN THE TOP FRAME. REFER TO PARTS PAGE "4-POST ROPS" ID0266908.

3. WASHERS, REF #11 (105-069) MUST FIT ON TOP OF CANOPY TO ALLOW SPACE FOR BOLT HEADS ATTACHING THE CANOPY TO THE FRAME.

NOTE:

03

ID0290620

68

CABLE GUIDE 2-POST ROPS RT80Q T3, T4

6

1 4

12

11 10 9

7

4

8

5 3 2

02

ID0290681

69

CABLE GUIDE 2-POST ROPS RT80Q T3, T4 REF PART NO. NUMBER

QTY

190-2001 1 320-557 2 106-505 3 105-069 4 105-814 5 318-199 6 185-541 7 106-496 8 106-709 9 107-520 10 117-207 11 184-453 12 110-033

- CABLE GUIDE, 2-POST 1 2-POST CABLE GUIDE 4 BOLT (3/8-NC X 4-1/2") 4 WASHER (.406") 4 FLG LOCKNUT (3/8-NC) 2 MOUNT BAR 1 CABLE GUIDE 4 FLG SCREW (M12-1.75 X 35MM) 4 FLG LK NUT (M12-1.75) 4 PIN (.375" X 3.75") 4 COMPRESSION SPRING 4 SPACER TUBE 4 HAIR CLIP PIN (1/8" X 1/2")

DESCRIPTION

REMARKS

REFER TO FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. SPRING, 117-207, IS A PRESS FIT ON CLIP PIN, INSTALL WITH SMALL END OF SPRING AGAINST HEAD OF CLIP PIN (107-520).

NOTE:

02

ID0290681

70

RIGHT PIVOT MOUNT H853

21

6

20

16

4

17 18

6

19 12 4 8

9 11

10 13 10

7

5

14 9

1 4

15

3 2 8

3

10

9

13 19

18

16

14

1 12 2

02

ID0281404

71

RIGHT PIVOT MOUNT H853 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

1 BEARING SPINDLE 1 PIVOT WEAR STRIP 1 MOTOR MOUNT RETAINER 12 WASHER (M16, HARDENED) 4 SCREW (M16-2.00 X 55MM, 10.9) 8 SCREW (M16 X 60MM 10.9) 1 HEADSHAFT 1 INTERNAL SEAL (3.438") 2 TAPERED BEARING (2.952") 2 TAPERED RACE (4.527") 1 MACHINERY BUSHING 2.625" 1 LOCKNUT (BEARLOCK 2.548" THREAD) 3 ZERK (1/4-28 SAE-LT) 1 DUST CAP 3 BOLT (1/4-NC X 3/4", CSK, SOC) 1 HEADSHAFT SPROCKET 1 SPROCKET HUB 3" PITCH 1 WASHER 1 SCREW (M20-2.50 X 40MM) 16 CAM WASHER (5/8") 8 SCREW (M16-2.00 X 40MM, 10.9)

300-8513 117-343 300-7891 106-398 106-616 107-598 160-1167 150-2759 126-013 126-012 110-262 105-1371 115-003 300-8512 105-263 142-009 160-1168 300-7915 106-344 105-497 106-478

DESCRIPTION

REMARKS

USE LOCTITE 277 OR EQUIVALENT

NOT SHOWN:

FOOTNOTES:

NOTE:

1. REFER TO "PIVOT" ID0281406 FOR MOUNTING LOCATION.

02

ID0281404

72

LEFT PIVOT MOUNT H853

7 4 2 1

7 4

8

3

4 7

5 4 8

6

4

4 5

01

ID0281405

73

LEFT PIVOT MOUNT H853

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 BEARING MOUNT 1 PIVOT WEAR STRIP 1 RETAINER PLATE 16 WASHER (M16, HARDENED) 4 SCREW (M16-2.00 X 80MM, 10.9) 4 SCREW (M16-2.00 X 55MM, 10.9) 8 LOCKNUT (M16-2.0,PRV TRQ,10.9) 4 ZERK (1/4-NF, STR)

300-8511 117-343 300-7889 106-398 107-197 106-616 106-545 115-003

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0281405

74

PIVOT H853

3

6

4

6

8

5 1 3 5 7

7

8

10 9

10

FOOTNOTE 1

2

03

ID0281406

75

PIVOT H853 REF PART NO. NUMBER

QTY

1 301-2377 2 301-2371 3 151-043 4 125-773 5 183-882 6 181-975 7 181-974 8 106-471 9 177-1065 10 125-538

1 1 2 2 2 2 2 4 2 2

DESCRIPTION

ATTACHMENT FRAME PIVOT CYL (3.0 X 1.50 X 12.0) COMPOSITION BUSHING (1.75") TAPERED PIN (1.75" X 9.00") TAPERED INSERT (1.75") TAPERED INSERT (1.5") FLG SCREW (M16-2.00 X 30MM) TAPERED PIN (1.50" X 4.75") COMPOSITION BUSHING (1.5")

REMARKS

USE LOCTITE 277 OR EQUIVALENT

NOT SHOWN:

FOOTNOTES:

1. REFER TO "RIGHT PIVOT MOUNT" ID0281404 FOR CALLOUT OF THESE PARTS.

NOTE:

03

ID0281406

76

PROXIMITY SWITCH H853

2 1 3

01

ID0295265

77

PROXIMITY SWITCH H853

REF PART NO. NUMBER

QTY

1 2 3

1 PROXIMITY SWITCH 2 LOCKNUT (#10-24) 2 BOLT (#10-24 UNC X 1" PAN SLT)

215-1175 106-048 105-815

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0295265

78

70K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

4 1

3 2

6

7

8

9

5

REPAIR Part# 133-726 138-704 1 138-702 0 138-703 0 138-701 0 139-704 0 139-701 0 139-702 0 135-1242 16 135-1239 15 105-499 62 105-953 62 135-979 0 136-070 0 105-383 0 105-466 0 135-921 0

02

133-728 1 0 0 0 0 0 0 16 15 30 62 32 48 32 0 0

133-787 0 1 1 0 0 0 0 17 17 68 68 0 0 0 0 0

CHAIN ASSEMBLIES 133-790 133-746 134-726 0 1 0 1 1 0 1 0 0 1 0 0 0 0 1 0 0 0 0 0 0 19 20 16 19 19 15 76 78 62 76 78 62 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

134-736 0 0 0 0 1 1 0 18 17 70 70 0 0 0 0 0

134-747 0 0 0 0 1 0 1 20 19 38 78 0 0 0 40 40

134-756 0 0 0 0 1 0 2 24 23 94 94 0 0 0 0 0

ID0449257

79

70K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9

1 1 1 1 1 1 1 1 1

134-726 134-736 134-747 134-756 133-726 133-728 133-787 133-790 133-746

DESCRIPTION

REMARKS

P70K 2P DURA 62P 6.6 P70K 2P DURA 70P 6.8 P70K 2P DURA 78P 8.1 P70K 2P DURA 94P 6.62 70K 2P DURA 62P 6.6 70K 2P DURA 62P 9.62 70K 2P DURA 68P 6.6 70K 2P DURA 76P 6.6 70K 2P DURA 78P 6.8"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-704 70K DIGGING CHAIN STD 2P (62P) 138-702 70K DIGGING CHAIN STD 2P (16P) 138-703 70K DIGGING CHAIN STD 2P (52P) 138-701 70K DIGGING CHAIN STD 2P (8P) 139-704 70K DIGGING CHAIN PREMIUM 2P (62P) 139-701 70K DIGGING CHAIN PREMIUM 2P (8P) 139-702 70K DIGGING CHAIN PREMIUM 2P (16P) 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 135-1239 DURATOOTH, LEFT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 135-979 CHAIN SPACER (2.155") 136-070 SPACER 105-383 SPECIAL BOLT (3/4-NC X 6", GD8) 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 135-921 TOOTH SPACER

FOOTNOTES:

NOTE:

1. 70K STANDARD REPAIR STATION KIT 135-1182, 70K PREMIUM REPAIR STATION KIT 135-1187, 70K MASTER PIN 135-501, & 70K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0449257

80

70K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

4 1

5

2 3

6

REPAIR Part# 138-704 138-701 138-702 138-703 139-704 139-701 139-702 135-973 135-974 135-975 135-976 135-979 135-980 105-322 105-365 105-391 105-953

01

135-776 1 0 0 0 0 0 0 7 7 12 12 38 24 14 24 24 62

135-777 1 1 0 0 0 0 0 7 7 14 14 42 28 14 28 28 70

135-789 0 1 1 1 0 0 0 8 8 15 15 48 28 16 28 32 76

CHAIN ASSEMBLIES 135-778 135-779 137-776 1 1 0 0 0 0 1 2 0 0 0 0 0 0 1 0 0 0 0 0 0 9 10 7 9 10 7 15 18 12 15 19 12 46 56 38 32 38 24 18 20 14 32 38 24 28 36 24 78 94 62

7

137-777 0 0 0 0 1 1 0 7 7 14 14 42 28 14 28 28 70

8

137-778 0 0 0 0 1 0 1 9 9 15 15 46 32 18 32 28 78

ID0449274

81

70K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-776 135-777 135-789 135-778 135-779 137-776 137-777 137-778

DESCRIPTION

REMARKS

70K 2P ALG 62P 6.8 70K 2P ALG 70P 6.8 70K 2P ALG 76P 6.4" 70K 2P ALG 78P 6.8 70K 2P ALG 94P 6.8 P70K 2P ALG 62P 6.8 P70K 2P ALG 70P 6.8 P70K 2P ALG 78P 6.8

SEE F/N 1 SEE F/N1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-704 70K DIGGING CHAIN STD 2P (62P) 138-701 70K DIGGING CHAIN STD 2P (8P) 138-702 70K DIGGING CHAIN STD 2P (16P) 138-703 70K DIGGING CHAIN STD 2P (52P) 139-704 70K DIGGING CHAIN PREMIUM 2P (62P) 139-701 70K DIGGING CHAIN PREMIUM 2P (8P) 139-702 70K DIGGING CHAIN PREMIUM 2P (16P) 135-973 LEFT OUTSIDE BIT ADAPTER 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-975 LEFT INSIDE BIT ADAPTER 135-976 E.S. BIT ADPTR. RT. INSIDE 135-979 CHAIN SPACER, 70K 135-980 CHAIN SPACER (1.405") 105-322 BOLT (3/4-NC X 4.5") 105-365 BOLT (3/4-NC X 4") 105-391 BOLT (3/4-NC X 4.5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

1. USE INSERT BIT 136-101

NOTE:

1. 70K STANDARD REPAIR STATION KIT 135-1182, 70K PREMIUM REPAIR STATION KIT 135-1187, 70K MASTER PIN 135-501, & 70K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449274

82

110K DURATOOTH CHAINS (62P&70P) 2P CHAIN ASSEMBLIES GROUP 1

1

REPAIR Part# 133-420 138-411 1 135-1534 0 135-1239 15 135-1242 16 105-499 62 105-953 62 105-372 0 105-466 0 135-921 0 136-120 0 105-321 0 105-365 0 136-070 0 105-383 0 136-121 0

01

2

133-421 1 0 15 16 30 0 62 32 32 0 0 0 0 0 0

3

133-423 1 0 19 20 30 0 78 0 24 8 16 32 0 0 0

4

6

5

CHAIN ASSEMBLIES 133-459 133-460 133-461 0 0 0 1 1 1 17 17 18 18 18 17 70 34 34 70 70 70 0 0 0 0 36 0 0 36 0 0 0 0 0 0 0 0 0 0 0 0 54 0 0 36 0 0 0

133-462 0 1 22 22 32 88 0 0 30 9 20 36 0 0 0

7

8

133-463 0 1 23 24 94 126 0 0 24 4 16 16 0 0 4

ID0441443

83

110K DURATOOTH CHAINS (62P&70P) 2P CHAIN ASSEMBLIES GROUP 1 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

133-420 133-421 133-423 133-459 133-460 133-461 133-462 133-463

DESCRIPTION

REMARKS

110K 2P DURA 62P 7.0" 110K 2P DURA 62P 8.5" 110K 2P DURA 62P 12 110K 2P DURA 70P 7.0 110K 2P DURA 70P 8.5 110K 2P DURA 70P 10 110K 2P DURA 70P 12 110K 2P DURA 70P 15

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 135-1534 110K DIGGING CHAIN STD 2P (70P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 105-372 LOCKNUT (3/4-NC) 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 135-921 TOOTH SPACER 136-120 12" TOOTH ADAPTER 105-321 BOLT (3/4-NC X 3") 105-365 BOLT (3/4-NC X 4") 136-070 SPACER 105-383 BOLT (3/4-NC X 6", GD8) 136-121 BOLT (3/4-NC X 3")

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0441443

84

110K DURATOOTH CHAINS (78P & 94P) 2P CHAIN ASSEMBLIES GROUP 2

1

01

REPAIR Part# 133-430 135-1535 1 138-411 0 138-410 0 135-1239 19 135-1242 20 105-499 78 105-953 78 135-921 0 105-466 0 136-120 0 105-321 0 105-365 0 136-121 0

133-431 1 0 0 19 20 38 78 40 40 0 0 0 0

2

3

4

CHAIN ASSEMBLIES 133-433 133-434 133-440 1 1 0 0 0 1 0 0 2 24 26 23 25 26 24 38 104 94 98 140 94 30 30 0 0 0 0 10 4 0 20 20 0 40 16 0 0 9 0

5

133-441 0 1 2 23 24 46 94 48 48 0 0 0 0

6

ID0441478

85

110K DURATOOTH CHAINS (78P & 94P) 2P CHAIN ASSEMBLIES GROUP 2 REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

133-430 133-431 133-433 133-434 133-440 133-441

DESCRIPTION

REMARKS

110K 2P DURA 78P 7.0" 110K 2P DURA 78P 8.5" 110K 2P DURA 78P 12" 110K 2P DURA 78P 15" 110K 2P DURA 94P 7.0 110K 2P DURA 94P 8.5

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1535 110K DIGGING CHAIN STD 2P (78P) 138-411 110K DIGGING CHAIN STD 2P (62P) 138-410 110K DIGGING CHAIN STD 2P (16P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 135-921 TOOTH SPACER 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 136-120 12" TOOTH ADAPTER 105-321 BOLT (3/4-NC X 3") 105-365 BOLT (3/4-NC X 4") 136-121 BOLT (3/4-NC X 3")

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0441478

86

110K COMBO CHAINS 2P CHAIN ASSEMBLIES

1

2

REPAIR Part# 131-264 138-411 1 135-1534 0 135-1535 0 135-1239 6 135-1242 6 136-276 6 136-275 7 136-274 3 136-273 3 135-975 0 135-976 0 135-974 0 135-973 0 135-978 14 135-977 48 105-365 14 105-391 24 105-473 24 105-953 62

01

3

4

5

6

CHAIN ASSEMBLLIES: 131-266 131-268 131-269 131-270 0 0 1 0 1 0 0 1 0 1 0 0 7 7 6 7 6 8 6 6 7 8 0 0 7 8 0 0 4 4 0 0 4 4 0 0 0 0 7 7 0 0 6 7 0 0 3 4 0 0 3 4 16 16 14 16 54 62 48 54 16 16 14 16 26 30 24 26 28 32 24 28 70 78 62 70

131-271 0 0 1 7 8 0 0 0 0 8 8 4 4 16 62 16 30 32 78

ID0449237

87

110K COMBO CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

131-264 131-266 131-268 131-269 131-270 131-271

DESCRIPTION

REMARKS

110K 2P CMB DURA/SHK B 62P 6.0 110K 2P CMB DURA/SHK 70P 6.0" 110K 2P CMB DURA/SHK 78P 6.0" 110K 2P CMB DURA/ALG 62P 6.0" 110K 2P CMB DURA/ALG 70P 6.0" 110K 2P ALG B-O CMB 78P 6.0

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 135-1534 110K DIGGING CHAIN STD 2P (70P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 136-276 70/110K RT INSIDE BOLT-ON SHARK ADAPTER 136-275 70/110K LEFT INSIDE BOLT-ON SHARK ADPTER 136-274 70/110K LFT OUTSIDE BOLT-ON SHARK ADPTER 136-273 70/110K RT OUTSIDE BOLT-ON SHARK ADAPTER 135-975 LEFT INSIDE BIT ADAPTER 135-976 E.S. BIT ADPTR. RT. INSIDE 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-973 LEFT OUTSIDE BIT ADAPTER 135-978 CHAIN SPACER (1.593") 135-977 CHAIN SPACER (2.343") 105-365 BOLT (3/4-NC X 4") 105-391 BOLT (3/4-NC X 4.5") 105-473 BOLT (3/4-NC X 5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449237

88

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3

1

4 3 2

6

7

5 REPAIR Part# 134-420 139-411 1 139-412 0 135-1239 15 135-1242 16 105-499 62 105-953 62 105-466 0 135-921 0 136-070 0 105-383 0 135-977 0 136-071 0 105-365 0 105-321 0

02

134-421 1 0 15 16 30 62 32 32 0 0 0 0 0 0

CHAIN ASSEMBLIES 134-422 134-423 134-459 1 1 1 0 0 1 15 19 17 16 20 18 30 30 70 62 78 70 0 0 0 0 24 0 48 32 0 32 0 0 32 0 0 0 8 0 0 32 0 0 16 0

134-460 1 1 18 17 34 70 36 36 0 0 0 0 0 0

134-461 1 1 18 17 34 70 0 0 54 36 36 0 0 0

ID0449310

89

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7

1 1 1 1 1 1 1

134-420 134-421 134-422 134-423 134-459 134-460 134-461

DESCRIPTION

REMARKS

P110K 2P DURA 62P 7.0 P110K 2P DURA 62P 8.5 P110K 2P DURA 62P 10" P110K 2P DURA 62P 12" P110K 2P DURA 70P 7.0 P110K 2P DURA 70P 8.5 P110K 2P DURA 70P 10

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 139-412 110K DIGGING CHAIN PREMIUM 2P (8P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 135-921 TOOTH SPACER 136-070 SPACER 105-383 BOLT (3/4-NC X 6", GD8) 135-977 CHAIN SPACER (2.343") 136-071 10" - 12"" TOOTH ADAPTER 105-365 BOLT (3/4-NC X 4") 105-321 BOLT (3/4-NC X 3")

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0449310

90

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4

5 4

2

3

1

REPAIR Part# 134-462 139-411 1 139-410 0 139-412 1 135-1239 22 135-1242 22 105-499 32 105-466 0 105-953 88 105-321 20 105-365 36 135-921 30 136-070 36 136-071 9 136-088 0 105-383 0

01

CHAIN ASSEMBLIES 134-464 134-430 134-431 1 1 1 0 1 1 1 0 0 23 20 19 24 19 20 30 78 38 0 0 40 94 78 78 16 0 0 16 0 0 24 0 40 32 0 0 4 0 0 8 0 0 32 0 0

134-433 1 1 0 24 25 38 0 98 20 40 30 40 10 0 0

ID0449331

91

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4 REF PART NO. NUMBER

QTY

1 2 3 4 5

1 1 1 1 1

134-462 134-464 134-430 134-431 134-433

DESCRIPTION

REMARKS

P110K 2P DURA 70P 11 P110K 2P DURA 70P 15" P110K 2P DURA 78P 7.0 P110K 2P DURA 78P 8.5 P110K 2P DURA 78P 12

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

139-411 110K DIGGING CHAIN PREMIUM 2P (62P) 139-410 110K DIGGING CHAIN PREMIUM 2P (16P) 139-412 110K DIGGING CHAIN PREMIUM 2P (8P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 105-953 LOCKNUT (3/4-NC) 105-321 BOLT (3/4-NC X 3") 105-365 BOLT (3/4-NC X 4") 135-921 TOOTH SPACER 136-070 SPACER 136-071 10" - 12"" TOOTH ADAPTER 136-088 "14" - 16" TOOTH ADAPTER" 105-383 BOLT (3/4-NC X 6", GD8)

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449331

92

110K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

2

3

4

1

5

6

7 8

REPAIR Part# 135-485 138-411 1 139-411 0 139-412 0 139-410 0 138-410 0 135-1534 0 135-1535 0 135-976 12 135-975 12 135-974 7 135-973 7 135-978 24 135-977 38 105-365 24 105-473 24 105-322 14 105-953 62

01

135-486 0 0 0 0 0 1 0 14 14 7 7 28 42 28 28 14 70

135-487 0 0 0 0 0 0 1 15 15 9 9 32 46 32 28 18 78

CHAIN ASSEMBLIES 135-488 137-485 137-486 1 0 0 0 1 1 0 0 1 0 0 0 2 0 0 0 0 0 0 0 0 18 12 14 19 12 14 10 7 7 10 7 7 38 24 28 56 38 42 38 24 28 36 24 28 20 14 14 94 62 70

137-487 0 1 0 1 0 0 0 15 15 9 9 32 46 32 28 18 77

137-488 0 1 0 2 0 0 0 19 18 10 10 38 56 38 36 20 94

ID0449362

93

110K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-485 135-486 135-487 135-488 137-485 137-486 137-487 137-488

DESCRIPTION

REMARKS

110K 2P ALG 62P 6.7 110K 2P ALG 70P 6.6" 110K 2P ALG 78P 6.6" 110K 2P ALG 94P 6.8 P110K 2P ALG 62P 6.8 P110K 2P ALG 70P 6.8 P110K 2P ALG 78P 6.8 P110K 2P ALG 94P 6.8

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 139-411 110K DIGGING CHAIN PREMIUM 2P (62P) 139-412 110K DIGGING CHAIN PREMIUM 2P (8P) 139-410 110K DIGGING CHAIN PREMIUM 2P (16P) 138-410 110K DIGGING CHAIN STD 2P (16P) 135-1534 110K DIGGING CHAIN STD 2P (70P) 135-1535 110K DIGGING CHAIN STD 2P (78P) 135-976 E.S. BIT ADPTR. RT. INSIDE 135-975 LEFT INSIDE BIT ADAPTER 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-973 LEFT OUTSIDE BIT ADAPTER 135-978 CHAIN SPACER (1.593") 135-977 CHAIN SPACER (2.343") 105-365 BOLT (3/4-NC X 4") 105-473 BOLT (3/4-NC X 5") 105-322 BOLT (3/4-NC X 4.5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449362

94

NOTES:

95

MISCELLANEOUS

96

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

97

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

98

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

99

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

100

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which is D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

101

102

103

104

ID0135281