Ditch Witch H813 Parts Manual 053-2092 - PDF DOWNLOAD

H813 Parts Manual

Issue 8

053-2092

1

H813 ISSUE NO. 08PL-01/23 For Replacement Copy Order P/N 053-2092

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works.

This manual contains information concerning the following models: H813

Copyright 2010, 2011, 2012, 2014, 2018, 2023 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Jet Trac, Roto Witch, Subsite, Fluid Miser, Power Pipe, Super Witch, Pierce Arrow, Zahn, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY ______________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy July 2019

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse (including, but not limited to, rollover), abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 07

ID0134872

5

CONTENTS______________________ Decals Decal Location ............................................ 8 Frame Components Attachment Frame .................................... 12 Attachment Mounting ................................ 14 Counterweight Kit ...................................... 30 Headshaft.................................................. 26 Pivot .......................................................... 24 Slide Frame ............................................... 16 Slide, Lower .............................................. 22 Slide, Manual ............................................ 18 Slide, Upper .............................................. 20 TDM Sensor Mount ................................... 28 Hydraulics Cylinder – 2.5” x 1.25” .................................. 40 Cylinder – 2.5” x 1.5” x 24” ............................ 42 Drive.......................................................... 36 Grease Cylinder ........................................ 44 Pivot Lift .................................................... 34 Slide .......................................................... 38 Valve Service Parts ................................... 46

Accessories Boom, 7’ Assembly ................................... 58 Auger ........................................................ 50 Boom ........................................................ 56 Cylinder Lock ............................................ 68 Personnel Restraint .................................. 62 Boom, Roller ............................................. 52 Boom, Roller – Non-Wear Bar ...................... 54 Special Tool – Chain Jaws ........................... 78 Special Tools – Alligator Bit Puller ................. 74 Special Tools – Alligator Bit Punch ................ 76 Trench Cleaner ......................................... 60 Trench Cleaner – 3p.................................. 64 Trench Cleaner Feed Tube ...................... 66 Chains, 70K Duratooth ............................. 70 Chains, 70K Alligator ................................ 72 Miscellaneous Bolt/Nut Torque Chart ............................... 82 Replacement O-Ring Chart ...................... 87 Warranty Registration .............................. 89

ID0253417

6

7

DECALS

8

DECAL LOCATION H813

2 3

9

5 2

1 10

8 6

4

7 3

1

5

2

05

ID0214834

9

DECAL LOCATION H813 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10

270-8076 270-2348 700-002 274-318 270-7947 701-184 700-176 700-177 700-178 270-4503 270-7940

DESCRIPTION

REMARKS

H813 GRAY SERVICE DECAL KIT ISO

270-8108 2 2 3 2 1 2 1 1 2 1 1

H813 GRAY MODEL ID H813 MODEL ID DANGER CHAIN & AUGER ISO TIE DOWN LOCATION CHAIN TENSION ISO WARNING MOVING PARTS ISO RAISE/LOWER DIGGING BOOM TRENCHER L/R SIDE SHIFT DANGER STRIPE 2.75" X 15" DIGGING ATTACHMENT CONTROL NOTICE LUBE 10 HOURS ISO

FOOTNOTES

05

ID0214834

10

NOTES:

ID0134963

11

FRAME COMPONENTS

12

ATTACHMENT FRAME H813

4 2 1 3

4 8 7

6 5

02

ID0211589

13

ATTACHMENT FRAME H813

REF PART NO. NUMBER

QTY

1 300-7684 2 322-754 3 106-548 4 106-709 5 108-100 6 106-775 7 106-632 8 118-152

1 6 6 6 2 2 3 1

DESCRIPTION

REMARKS

H813 TRENCHER FRAME SLIDE BAR (PLASTIC) SCREW (M12-1.75X40MM, CSK) FLG LK NUT (M12-1.75) SCREW (M16-2 X 80MM, 10.9) JAM NUT (M16-2.00) FLG LK SCR (M12-1.75X35MM,SER) SPOILS FLAP

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0211589

14

ATTACHMENT MOUNTING H515/H813

3 2

5

1 4

3

HOLE "A" HOLE "B" 03

ID0022109

15

ATTACHMENT MOUNTING H515/H813 REF PART NO. NUMBER

QTY

1 2 3 4 5

2 WASHER (M16, HARDENED) 16 FLG SCREW (M16-2.00X45MM,10.9) 18 FLG NUT (M16-2.00, 10.9) 2 SPACER 2 SCREW (M16 X 60MM 10.9)

106-398 107-336 106-355 184-840 107-598

DESCRIPTION

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. WITH 31" TIRES, MOUNT WITH RESPECT TO HOLE "A" OF THE TRACTOR FRAME AS SHOWN, WITH 35" TIRES, USE HOLE "B".

NOTE:

03

ID0022109

16

SLIDE FRAME H515/H813

9

4 5

3

1

2

8

6

7 5

03

4

ID0009502

17

SLIDE FRAME H515/H813 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9

1 1 4 4 4 2 4 2 1

322-874 151-090 106-709 115-511 125-545 125-772 107-003 179-821 322-651

DESCRIPTION

CYLINDER MOUNT CYL (2.5 X 1.50 X 24.0) FLG LK NUT (M12-1.75) KLIP RING (1.50") MACH BUSHING (18GA, 1-1/2") COMPOSITION BUSHING (1.5") FLG LK SCREW (M12-1.75 X 35MM) CYLINDER PIN (1.5) SLIDE FRAME

REMARKS

SEE FOOTNOTE 1 AND 2

NOT SHOWN:

FOOTNOTES:

1. AS SHOWN ON OPPOSITE PAGE ALLOWS FOR CENTER TO OFFSET RIGHT DIGGING. TO DIG CENTER TO OFFSET LEFT, MOVE CYLINDER (2) AND CYLINDER MOUNT (1) TO THE OPPOSITE MOUNTING POSITION AFTER ROTATING 180°.

2. 322-874 CYL MOUNT IS USED ON H515 ONLY. FOR H813 USE 300-7917, NOT SHOWN

NOTE:

03

ID0009502

18

MANUAL SLIDE H515/H813

8

5 7

3 4 1 2 6 4 5

02

ID0009887

19

MANUAL SLIDE H515/H813 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

2 4 4 4 4 1 1 1

179-821 107-003 106-709 125-545 115-511 179-849 322-874 322-651

DESCRIPTION

CYLINDER PIN (1.5) FLG LK SCREW (M12-1.75 X 35MM) FLG LK NUT (M12-1.75) MACH BUSHING (18GA, 1-1/2") KLIP RING (1.50") POSITIONING BAR CYLINDER MOUNT SLIDE FRAME

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. BY USING HOLES CLOSEST TOGETHER AND MOUNTING BAR TO OPPOSITE END SHOWN, FULL RIGHT POSITION IS OBTAINED. TO TRENCH TO LEFT OF CENTER, MOVE ITEM 8 INTO OTHER MOUNTING HOLES AFTER ROTATING 180°.

2. 322-874 CYL MOUNT IS USED ON H515 ONLY, FOR H813 USE 300-7917, NOT SHOWN

NOTE:

02

ID0009887

20

UPPER SLIDE H813

2

4 1

6

3 5

01

ID0215587

21

UPPER SLIDE H813

REF PART NO. NUMBER

QTY

1 300-7706 2 106-548 3 106-709 4 322-754 5 106-442 6 107-336

1 2 2 2 6 6

DESCRIPTION

REMARKS

UPPER SLIDE SCREW (M12-1.75X40MM, CSK) FLG LK NUT (M12-1.75) SLIDE BAR (PLASTIC) FLG LKNUT (M16-2.0,PRVTRQ10.9) FLG SCREW (M16-2.00X45MM,10.9)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0215587

22

LOWER SLIDE H813

6

1 4

5 3 8

2

7

01

ID0215605

23

LOWER SLIDE H813

REF PART NO. NUMBER

QTY

1 327-922 2 300-7705 3 108-100 4 322-754 5 106-548 6 106-709 7 107-336 8 106-775

1 1 4 4 4 4 8 4

DESCRIPTION

REMARKS

SLIDE BRACKET LOWER SLIDE SCREW (M16-2 X 80MM, 10.9) SLIDE BAR (PLASTIC) SCREW (M12-1.75X40MM, CSK) FLG LK NUT (M12-1.75) FLG SCREW (M16-2.00X45MM,10.9) JAM NUT (M16-2.00)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0215605

24

PIVOT H813

15

5 4 3

7

6 6

14 6 8 1

13

1 12

2 6 9 11 10

03

ID0219114

25

PIVOT H813

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

2 PIVOT WEAR STRIP 1 MOTOR MOUNT RETAINER 1 BEARING MOUNT 1 RETAINER PLATE 4 SCREW (M16-2.00 X 80MM, 10.9) 24 WASHER (M16, HARDENED) 4 SCREW (M16-2.00 X 55MM, 10.9) 8 LOCKNUT (M16-2.0,PRV TRQ,10.9) 8 SCREW (M16 X 60MM 10.9) 1 BOOM STUB (24") 1 LOCKNUT(M12-1.75,PRV TRQ,10.9) 1 SCREW (M12-1.75 X 140MM, SOC) 1 BEARING SPINDLE 1 PIVOT 4 ZERK (1/4-NF, STR)

117-343 300-7891 300-8511 300-7889 107-197 106-398 106-616 106-545 107-598 300-7311 106-685 105-678 300-8513 300-7661 115-003

DESCRIPTION

REMARKS

SEE FOOTNOTE 2 SEE FOOTNOTE 1

SEE FOOTNOTE 3

NOT SHOWN:

300-7310

1 BOOM STUB (30.3")

FOOTNOTES:

1- FOR USE WITH THE 3' AND 4' BOOM ASSEMBLIES. FOR 5' AND LONGER BOOMS USE 300-7310.

2-USE LOCTITE 242 OR EQUIVALENT. 3-PART OF ASSEMBLY 190-1456

NOTE:

03

ID0219114

26

HEADSHAFT H813

13 3

12

2 1 4

11 16 15 15 4

14 5

9 7

6

8 8 7 10

DETAIL A

6

10 7

A 12

13 11 5 03

2

ID0219119

27

HEADSHAFT H813

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

190-1456 300-8513 300-8512 105-263 115-003 160-1167 150-2759 126-013 126-012 110-262 105-1371 160-1168 300-7915 106-344 106-478 105-497 142-009

QTY

DESCRIPTION

SPINDLE ASSEMBLY 1 BEARING SPINDLE 1 DUST CAP 3 BOLT (1/4-NC X 3/4", CSK, SOC) 4 ZERK (1/4-NF, STR) 1 HEADSHAFT 1 INTERNAL SEAL (3.438") 2 TAPERED BEARING (2.952") 2 TAPERED RACE (4.527") 1 MACHINERY BUSHING 2.625" 1 LOCKNUT (BEARLOCK 2.548" THREAD) 1 SPROCKET HUB 3" PITCH 1 WASHER 1 SCREW (M20-2.50 X 40MM) 8 SCREW (M16-2.00 X 40MM, 10.9) 16 CAM WASHER (5/8") 1 HEADSHAFT SPROCKET

REMARKS

INCLUDES REF NO.'S 1-10

SEE FOOTNOTE 1

SEE FOOTNOTES 2, 3 LOCTITE 271 OR EQUIVALENT LOCTITE 242 OR EQUIVALENT

NOT SHOWN:

FOOTNOTES:

1- APPLY COUPLING GREASE CMW P/N 256-648 TO BOTH INTERNAL AND EXTERNAL SPLINES BEFORE ASSEMBLY (TEXACO P/N 221912) 2- LOOSEN SET SCREWS, NUT SHOULD SCREW ON EASILY BY HAND. USE LOCTITE 242 OR EQUIVALENT AND TIGHTEN NUT TO 20 ft-lb WITH CMW P/N 300-8939. SPIN SHAFT SEVERAL REVOLUTIONS. BACK OFF NUT. TIGHTEN NUT UNTIL 13-15 in-lb SHAFT ROLLING TORQUE IS ACHIEVED. 3- USE LOCTITE 242 OR EQUIVALENT ON SET SCREWS. TIGHTEN TO 35 in-lb IN A CRISS-CROSS PATTERN. REPEAT AT 50 in-lb AND THEN 65in-lb. USE CMW P/N 105-1397AS REPLACEMENT HARDWARE. NOTE:

03

ID0219119

28

TDM SENSOR MOUNT H515/H813

2

1

2

1

03

ID0021773

29

TDM SENSOR MOUNT H515/H813 REF PART NO. NUMBER

QTY

1 2

2 TDM BOOM SENSOR 2 SCREW #10-24 X 2 1/4" SOC HEAD

220-556 107-895

DESCRIPTION

REMARKS

USE LOCTITE 401 OR EQUIVALENT

NOT SHOWN:

FOOTNOTES:

NOTE:

1. ITEMS 1&2 ARE IN KIT 604-997.

03

ID0021773

30

COUNTERWEIGHT KIT

3

2 1 2

3 2 2 1

04

4 4

ID0021803

31

COUNTERWEIGHT KIT REF PART NO. NUMBER

1 2 3 4

105-370 105-355 105-357 325-668

QTY

DESCRIPTION

2 BOLT (5/8-NC X 5-1/2", GD8 4 WASHER (3/4") 2 LOCKNUT (5/8-NC) 2 COUNTERWEIGHT PLATE

REMARKS

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. ITEMS 1 THRU 4 ARE IN KIT #104-169 AND ARE REQUIRED FOR THE MANUAL SLIDE OPTION WHEN THE TRACTOR IS EQUIPPED WITH A BACKHOE. KIT #104-082 WAS SUPERCEDED BY #104-169.

2. WEIGHT KIT IS TO BE MOUNTED SIDE OPPOSITE OF OFFSET DIGGING.

NOTE:

04

ID0021803

32

NOTES:

ID0134963

33

HYDRAULICS

34

PIVOT LIFT HYDRAULICS H813

22

15 16 17

1 14 2

19 13

2 20

21

1

4 3

18

23 9 4

11

11

12

3

24

10

12 25

9 8

23

5 7

9 5

6 20 8 04

7 ID0219689

35

PIVOT LIFT HYDRAULICS H813

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

179-043 125-772 181-974 106-471 178-226 125-771 181-982 106-469 154-226 117-326 154-265 117-194 154-276 153-998 154-264 154-279 153-995 154-322 106-381 151-180 515-533 159-631 515-175 154-871 117-702

QTY

2 2 2 2 2 2 2 2 4 1 2 2 2 1 1 1 1 1 4 2 1 1 2 1 1

DESCRIPTION

REMARKS

TAPERED PIN (38.1MM X 230MM) COMPOSITION BUSHING (1.5") TAPERED INSERT (1.5") FLG SCREW (M16-2.00 X 30MM) TAPERED PIN (4.50 X 1.25) COMPOSITION BUSHING (1.25") TAPERED INSERT (1.25") FLG SCREW (M12-1.75 X 30MM) CONNECTOR (04O-06S90) ABRASION SLEEVE (1.00" X 58"") UNION RUN TEE (04OFX-04O-04O) ABRASION SLEEVE (1.00" X 16") CONNECTOR (04O-08S90) ORIFICE PLATE (.062) CONNECTOR (08O-10S45) CONNECTOR (08O-10S) CONNECTOR (08S-08SF) CONNECTOR (08O-10S90) FLG LK SCREW (M8-1.25 X 25MM) CYL (2.5 X 1.25 X 12.0) HOSE (04OFX-68"-3000) HYD CONTROL VALVE (2-SPOOL) HOSE (04OFX90-16"-3000) HOSE (04OFX-58"-3000) ABRASION SLEEVE (1.00" X 68"")

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0219689

36

DRIVE HYDRAULICS H515/H813

10

12

14

13

6

9

16 7

8

11

17 4

5 15 1 3

08

2

ID0015388

37

DRIVE HYDRAULICS H515/H813 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

4 1 1 4 1 1 2 1 1 1 2 1 1 1 1 2 1

106-398 159-563 159-590 106-340 154-283 154-396 154-371 154-290 153-249 115-789 110-220 154-885 154-878 154-677 159-562 514-242 149-130

DESCRIPTION

WASHER (M16, HARDENED) HYDRAULIC MOTOR HYDRAULIC MOTOR SCREW (M16-2.00 X 50MM) CONNECTOR (06S-08O45) BK CONNECTOR (08O-08O90BK) CONNECTOR (12S-16O45) UNION (16O-16OFX90) CONNECTOR (16O-16OFX45) ABRASION SLEEVE (3.66" X 54") MACH BUSHING (1-1/2", 14GA) HOSE (16OFX-62"-5000) HOSE (16OFX45-60"-4000) HOSE (08OFX-62"-3000) HYDRAULIC MOTOR BK CONNECTOR (16O-16O45BK) O-RING (356 D70)

REMARKS

LOW SPEED, SEE FOOTNOTE 2,4,5 HIGH SPEED, SEE FOOTNOTE 3,4,5 LOCTITE 271 OR EQUIVALENT

MID SPEED, SEE FOOTNOTE 1,4,5

NOT SHOWN:

FOOTNOTES:

1. SUPERCEDED BY 150-1038 2. SUPERCEDED BY 150-1039 3. SUPERCEDED BY 150-1040 4. SEAL KIT # 150-1041, FOR HYD MOTORS: 150-1038, 150-1039, 150-1040 5. APPLY COUPLING GREASE CMW P/N 256-648 TO SHAFT SPLINES BEFORE ASSEMBLY (TEXACO P/N 221912)

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS. 2. ITEMS 7, 8, 9 & 16 ARE IN MOTOR KIT 604-952, ITEMS 8, 9, 14 & 16 ARE IN MOTOR KIT 604-953, ITEMS 8, 9, 15, & 16 ARE IN MOTOR KIT 604-954.

3. SEAL KIT# 191-373 USED IN ITEMS 159-562, 159-563, 159-950.

08

ID0015388

38

SLIDE HYDRAULICS H515/H813

11

1

8

3 7 2 5 10

6

9

2

9 4

06

ID0014763

39

SLIDE HYDRAULICS H515/H813 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11

1 1 1 1 1 1 2 1 2 1 1

159-631 154-706 154-726 151-090 117-566 117-214 154-261 106-381 154-226 110-030 116-941

DESCRIPTION

REMARKS

HYD CONTROL VALVE (2-SPOOL) HOSE (04OFX90S-40"-3000) HOSE (04OFX90-15"-3000) CYL (2.5 X 1.50 X 24.0) ABRASION SLEEVE (1.25" X 11") ABRASION SLEEVE (1.25" X 40") CONNECTOR (04O-08S) FLG LK SCREW (M8-1.25 X 25MM) CONNECTOR (04O-06S90) CABLE TIE (1/16" TO 4") HANDLE (3/8-NC, GREEN)

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT O-RINGS.

06

ID0014763

40

HYDRAULIC CYLINDERS (2.5" X 1.25")

1

6 11 12

13 5

7 8 4 9 3 10

2

02

ID0015846

41

HYDRAULIC CYLINDERS (2.5" X 1.25") REF PART NO. NUMBER

QTY

1 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

CYL (2.5 X 1.25 X 2.0) CYLINDER BARREL (2.5 X 2.0) CYLINDER ROD (1.25 X 2.0) CYL (2.5 X 1.25 X 2.5) CYLINDER BARREL (2.5 X 2.5) CYLINDER ROD (1.25 X 2.5) CYL (2.5 X 1.25 X 3.0) CYLINDER BARREL (2.5 X 3.0) CYLINDER ROD (1.25 X 3.0) CYL (2.5 X 1.25 X 4.0) CYLINDER BARREL (2.5 X 4.0) CYLINDER ROD (1.25 X 4.0) CYL (2.5 X 1.25 X 5.0) CYLINDER BARREL (2.5 X 5.0) CYLINDER ROD (1.25 X 5.0) CYL (2.5 X 1.25 X 6.0) CYLINDER BARREL (2.5 X 6.0) CYLINDER ROD (1.25 X 6.0) CYL (2.5 X 1.25 X 8.0) CYLINDER BARREL (2.5 X 8.0) CYLINDER ROD (1.25 X 8.0) CYL (2.5 X 1.25 X 10.0) CYLINDER BARREL (2.5 X 10.0) CYLINDER ROD (1.25 X 10.0) CYL (2.5 X 1.25 X 12.0) CYLINDER BARREL (2.5 X 12.0) CYLINDER ROD (1.25 X 12.0)

3 4 5 6 7 8 9 10 11 12 13

150-773 150-779 150-776 106-097 500-031 157-021 157-541 157-538 125-775 157-535 157-019

1 1 1 1 1 1 1 1 1 1 1

CYLINDER HEAD (2.5 X 1.25) LOCK RING (2.5) CYLINDER PISTON (2.5 X 1.25) FLG BOLT (5/8-NC X 1-3/4",GD8) O-RING (228 D90) BACKUP RING (228 D90) U-SEAL (1.250") WIPER SEAL (1.250") WEAR RING BACKUP RING (139 D90) O-RING (139 D90)

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

REMARKS

DESCRIPTION

151-101 152-034 153-012 151-084 152-022 153-005 151-055 152-005 150-435 151-028 150-283 150-415 149-797 149-810 150-423 151-061 152-010 150-438 151-045 150-295 150-427 149-675 150-692 149-730 151-180 152-015 150-418

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

.

SEE FOOTNOTE 3

NOT SHOWN:

259-100 259-236 259-242 259-243 259-188

U-SEAL INSTALLER (1" - 1.499") WIPER INSTALLER (1.25") PISTON SEAL INSTALLER (2.5") PISTON INSTALLER (2.5") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. REF. #1 & #2 ARE SPECIFIC TO EACH CYLINDER, REF #3 THRU #13 ARE COMMON FOR ALL THE ABOVE LISTED CYLINDERS. 2. SEAL REPAIR KIT P/N: 190-166 3. APPLY LOCTITE 277 OR EQUIVALENT, TORQUE TO 180-200 FT-LBS

NOTE:

02

ID0015846

42

43

44

45

46

VALVE SERVICE PARTS

6

159-631

O U T

I N

1 7 9

10 2

INLET R

OUTLET

9 P 3 PB 4 5 9 STANDARD

NOTE: BEFORE REASSEMBLY OF VALVE SECTIONS, REMOVE O-RINGS, DRY THOROUGHLY (INCLUDING VALVE SETION) AND REPLACE.

01

WORKPORT RELIEF 500-1466 500PSI 500-1467 1500PSI 500-894 3000PSI 500-329 4800PSI ANTI-CAV 499-401 2650PSI 500-1468 3000PSI MAIN RELIEF 500-381 2500PSI 500-927 2250PSI

ID0286150

47

VALVE SERVICE PARTS 159-631

01

TRENCH CLEANER

1

2

499-325

LIFT

499-326

VALVE 159-631

1 2 3 4 5 6 7 8 9 10

159-631 500-1140 155-179 191-157 499-029 191-154 500-926 502-106 599-278 506-1040 191-151

1 1 1 1 4 2 3 2 1 1 4

HYD CONTROL VALVE (2-SPOOL) V10 HANDLE KIT W/O KNOB SAE #10 PORT PLUG POWER BEYOND SLEEVE LOCK OUT CARTRIDGE SPOOL POSITIONER KIT SECTIONAL SEAL KIT EXTENDED SPOOL CLEVIS NR PLUG KIT V10 TIE ROD STUD KIT (1-SPOOL) SPOOL LIP SEAL KIT

SECTION 1 W/O KNOB

TORQUE TO 12-14 FT LBS

ID0286150

48

NOTES:

ID0134963

49

ACCESSORIES

50

AUGER H813

18 11

17 16

7

19

5 6

20

4 13

1

3

8

2

21

12

10

14

9 15

ASSEMBLED VIEW 02

ID0216614

51

AUGER H813

REF PART NO. NUMBER

QTY

1 145-244 2 125-620 3 142-038 4 106-474 5 106-399 6 106-665 7 106-632 8 106-685 9 145-071 10 145-070 11 145-109 12 145-110 13 300-7916 14 145-245 15 184-188 16 184-189 17 115-001 18 105-391 19 105-953 20 105-743 21 140-1199

1 DOUBLE AUGER SHAFT 2 FLANGE BEARING (1.750", 4-BLT) 1 10T 3.067P AUGER SPROCKET 6 SCREW (M20-2.50 X 60MM) 10 WASHER (M20, HARDENED) 6 LOCKNUT (M20-2.50, 10.9) 3 FLG LK SCR (M12-1.75X35MM,SER) 4 LOCKNUT(M12-1.75,PRV TRQ,10.9) 1 LEFT AUGER 1 RIGHT AUGER 1 RIGHT AUGER 1 LEFT AUGER 2 AUGER BEARING PLATE 1 SINGLE AUGER SHAFT 1 SPACER 1 SPACER 2 ZERK (02N) 2 BOLT (3/4-NC X 4.5") 2 LOCKNUT (3/4-NC) 4 FLG LK SCREW (M12-2.00 X 45MM) 1 ROCK GUARD, H813

DESCRIPTION

REMARKS

3P, SEE FOOTNOTE 4

LONG, SEE FOOTNOTE 2 & 3 LONG, SEE FOOTNOTE 2 & 3 SHORT, SEE FOOTNOTE 2 & 3 SHORT, SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 SEE FOOTNOTE 2

NOT 1 SHOWN:

181-831

1

REPLACEMENT SLEEVE (6.00")

SEE FOOTNOTE 1

FOOTNOTES:

1. THE REPLACEMENT SLEEVE IS USED TO REPLACE AN AUGER WHEN MOUNTING A SINGLE AUGER SHAFT. 2. TO BE USED WHEN OPERATING ATTACHMENT IN THE FULL SIDE POSITION, WITH THE SINGLE AUGER. 3. TO BE USED WHEN OPERATING ATTACHMENT IN MID POSITION, WITH LARGER BOOMS. 4. ALSO AVAILABLE 2P: 142-031 AUGER SPROCKET (2.00" A15)

NOTE:

02

ID0216614

52

ROLLER BOOM 3P

H515/H516/H553/H813/H853

2 3

1 2 12 7

15

9

11

19

10

5

2 14

13 8

6 15 4

4

16

16

8

5

13

18 17

19 9

02

ID0273651

53

ROLLER BOOM 3P

H515/H516/H553/H813/H853 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

QTY

143-120 143-130 143-358 140-1225 190-183 143-102 1 143-101 1 143-347 1 140-1210 1 115-001 3 151-053 1 115-470 2 125-216 2 110-220 AR 115-019 1 145-589 2 155-852 2 115-151 1 159-093 1 180-441 1 184-067 2 105-377 1 115-152 2 125-265 2 142-756 1 181-697 1 181-699 2

DESCRIPTION

REMARKS

LTR WEAR BAR BOOM (36" 3P) LTR WEAR BAR BOOM (48" 3P) LTR NON-WEAR BAR BOOM (48" 3P) LTR WEAR BAR BOOM (60" 3P) BEARING/SEAL REPAIR KIT BOOM 3P 3' BOOM (3P, 4') BOOM (3P, 4') 3P 5FT BOOM ZERK (O2N) CYL (1.5" X 1.5" X 8.375") INTERNAL SNAP RING (3.250") TAPERED RACE (3.265") MACH BUSHING (1-1/2", 14GA) ZERK (02N) SPACER EXTERNAL SEAL (2.250") REDUCER (16N-12NF) RELIEF VALVE (5/8-NF, 02N) IDLER SHAFT (1.500" X 4.375") SEAL SPACER JAM NUT (1-1/2-NF) PLUG (12N, SQ FM) TAPERED BEARING (1.500") LT ROLLER (3.067"C17.2") BEARING SPACER SEAL SLEEVE

INCL REF NO.'S 1 - 19, USES 52 P INCL REF NO.'S 1 - 19, USES 62 P INCL REF NO.'S 1 - 7, AND 9 - 19, USES 62 P INCL REF NO.'S 1 - 19, USES 72 P, SEE FOOTNOTE 1 INCL REF NO.'S 4, 5, 8, 9, 16, 18, & 19

NON-WEAR BAR SEE FOOTNOTE 1

DO NOT INSTALL ON THE 143-358 BOOM

NOT SHOWN:

FOOTNOTES:

1. THE H515, H516, H553, H813, AND H853 UNITS USE THE 5' BOOM, 140-1210, (ASSEMBLY 140-1225). PREVIOUS UNITS USE THE 5' BOOM, 143-370, (ASSEMBLY 143-375).

NOTE:

02

ID0273651

54

55

56

BOOM

1 4

2

3

01

ID0138873

57

BOOM REF PART NO. NUMBER

1.

2.

3.

4.

140-124 140-125 140-330 140-126 140-129 140-765 140-766 140-758 140-751 105-367 105-419 140-114 140-267 140-121 140-115 140-120 140-328 140-116

QTY

2 2 1 2 1 2 1 1 1 2 2 1 2 1 1

DESCRIPTION

BOOM PARTS ASS'Y (42.8 2P) BOOM PARTS ASS'Y (58.8 2P) BOOM PARTS ASS'Y (70.9 2P) BOOM PARTS ASS'Y (83.0 2P) BOOM PARTS ASS'Y (83.0 3P) SLIDE AND STOP SLIDE AND STOP SIDE PLATE SLIDE AND STOP SLIDE PLATE LOCKNUT (1-NC) BOLT (1-NC X 4") BOOM (44") SIDE PLATE ROCK GUARD BOOM (60.5") SIDE PLATE BOOM (70-7/8") BOOM (83")

REMARKS

FOR 2" P FOR 3" P

WELD-ON WELD-ON WELD-ON

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0138873

58

7' BOOM ASSEMBLY

1 2 12 11

3 8

14

10 14 13

15

6 5

4

7 12

9

14 11 13

02

ID0230146

59

7' BOOM ASSEMBLY REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

140-1185 105-419 105-367 150-058 140-013 140-021 140-758 115-019 180-440 180-441 105-377 115-003 140-723 140-661 140-244

QTY

1 1 1 1 1 1 1 1 1 1 2 2 2 2 1

DESCRIPTION

STS BOOM, 94P BOLT (1-NC X 4") LOCKNUT (1-NC) GREASE CYLINDER BOOM SLEEVE BOOM SPRING SLIDE AND STOP ZERK (02N) SHAFT, SLIDE & STOP (4.875") IDLER SHAFT (1.500" X 4.375") JAM NUT (1-1/2-NF) ZERK (1/4-NF, STR) SPROCKET (3.067"A10) TAPERED BRNG/RACE KIT SUPPORT TUBE

REMARKS

REFER TO "NOTE" SECTION

NOT SHOWN:

FOOTNOTES:

NOTE:

1. TAPERED BRNG/RACE KIT INCLUDES: 115-470 INTERNAL SNAP RING. 125-266 TAPERED RACE 180-244 BEARING SPACER 125-265 TAPERED BEARING 180-243 SEAL SPACER 155-843 INTERNAL SEAL 180-026 SPACER

02

ID0230146

60

TRENCH CLEANER

2

16 16

17

9 8

15 9

18

17 17 10

1 17

11

19 4 14 13

6

3

5 7

12

04

ID0012405

61

TRENCH CLEANER REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

1 CLEANER 1 CARRIAGE 1 LOWER CLEANER FLAP 1 LOWER CLEANER 1 BOLT PLATE 4 SCREW (M8-1.25 X 60MM) 1 SPOILS FLAP (5") 1 LOCKNUT (1/2-NC) 2 WASHER (1/2") 2 LOCKNUT (5/8-NC) 2 BOLT (5/8-NC X 3-1/2") 9 LOCKNUT (M8-1.25, NLK) 2 SCREW (M8-1.25 X 50MM) 3 SCREW (M8-1.25 X 35MM) 2 PIN 4 KLIP RING (1.250") 4 SPRING BUSHING (.500) 1 BOLT (1/2-NC X 7.00", GD5) 5 WASHER (5/16")

141-765 329-870 118-367 325-615 325-660 106-570 118-177 105-065 105-071 105-357 106-212 107-096 106-329 106-267 177-183 115-483 105-1031 105-1030 105-117

DESCRIPTION

REMARKS

118-374 (6") 118-375 (7") SEE FOOTNOTE 1

118-178 (6") 118-179 (7") SEE FOOTNOTE 1

NOT SHOWN:

104-055

TRENCH CLEANER KIT

INCL. REF #'S 1-20

FOOTNOTES:

1- KIT #'S 191-465 (5") 191-466 (6") 191-467 (7")

NOTE:

04

ID0012405

62

PERSONNEL RESTRAINT H813

1

8

3 7

5

4

2 6

01

5

ID0211577

63

PERSONNEL RESTRAINT H813

REF PART NO. NUMBER

1 2 3 4 5 6 7 8

141-040 300-7794 300-7797 106-459 106-399 106-665 106-633 106-356

QTY

1 1 1 4 8 4 4 4

DESCRIPTION

RESTRAINT BAR (54.0", 3P) LEFT RESTRAINT SUPPORT RIGHT RESTRAINT SUPPORT SCREW (M20-2.50 X 70MM, 10.9) WASHER (M20, HARDENED) LOCKNUT (M20-2.50, 10.9) BOLT (M20-2.50 X 130MM) FLG NUT (M20-2.50, 10.9)

REMARKS

USED WITH 3' BOOM OPTIONS

NOT SHOWN:

141-041 141-043

1 RESTRAINT BAR (68.0") 3P 1 RESTRAINT BAR (81.0") 3P

USED WITH 4' BOOM OPTIONS USED WITH 5' BOOM OPTIONS

FOOTNOTES:

NOTE:

01

ID0211577

64

TRENCH CLEANER 3P

17

9

17

5

6

7 8 4 13 16 2 18

9

3 12

1 10

12

15

14 11

08

ID0109686

65

TRENCH CLEANER 3P REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

100-129 105-047 105-052 105-118 105-320 105-338 183-057 181-216 105-502 110-128 116-033 116-034 116-035 116-036 140-952 141-661 141-052 143-148 141-348 141-053 143-147 141-353 141-351 140-975 140-976 140-977 180-573 140-955 141-662 180-559

QTY

6 6 6 2 2 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CLEANER SHOE & SLIDE KIT LOCKNUT (3/8-NC) BOLT (3/8-NC X 1-1/4") WASHER (3/8") BOLT (3/4-NV X 2-1/4") LOCKNUT (3/4-NC) SLIDE LOCK PIN ROLLER COTTER PIN (3/16" X 2") SPRING CLIP PIN (5/32" X 1") SHOE FACING (6") SHOE FACING (8") SHOE FACING (10") SHOE FACING (12") CLEANER SHOE CLEANER SHOE CLEANER SHOE (44") 3P, 3' CLEANER BAR 3P, 3' CLAENER BAR CLEANER BAR 3P, 4' CLEANER BAR 3P, 4' CLEANER BAR 3P, 5' CLEANER BAR SHOE FACING 8" SHOE FACING 10" SHOE FACING 12" PIN CLEANER SHOE SLIDE CLEANER SHOE SLIDE PULL OIN (1" X 4.625")

INCLUDES REF NO.'S 1-9 & 16-18. SEE FOOTNOTE 1

OBSOLETE FOR 3' ROLLER BOOM, SEE FOOTNOTE 3.

FOR 3' ROLLER BOOM, SEE FOOTNOTE 2, OBSOLETE FOR 3' STD BOOM, SEE FOOTNOTE 2.

FOR 4' ROLLER BOOM, SEE FOOTNOTE 3 & 5.

FOR 4' ROLLER BOOM, SEE FOOTNOTE 2.

FOR 4' STD BOOM, SEE FOOTNOTE 2.

SEE FOOTNOTE 4

OBSOLETE

NOT SHOWN:

FOOTNOTES:

1. REFER TO INSTALLATION DIAGRAM 050-066 2. H411 3. H412, H514, M552 4. FOR 5' STD BOOM, SEE FOOTNOTE 2; FOR 5' ROLLER BOOM, SEE FOOTNOTE 3 5. H552 NOTE: THE ONLY 3P BOOM THAT CAN BE MOUNTED ON THE H552 IS THE 4' LTR NON-WEARBAR BOOM (143-358) NOTE:

08

ID0109686

66

67

68

CYLINDER LOCK

5

4

1

6

2 3

01

ID0215130

69

CYLINDER LOCK REF PART NO. NUMBER

QTY

1 300-8451 2 300-8209 3 105-1346 4 300-8208 5 105-1217 6 116-271

1 CYL. LOCK 1 PIN BRACKET 1 SNAPPER PIN (3/8" X 3") 1 TAB 4 FLG SCREW (M6-1.00 X 15MM, SELF TAP) 12 BULK STRIP (3/4", SOLD PER 1")

DESCRIPTION

REMARKS

NOT SHOWN:

190-1373

CYLINDER LOCK KIT

INCL. REF #'S 1-6

FOOTNOTES:

NOTE:

01

ID0215130

70

70K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

4 1

3 2

6

7

8

9

5

REPAIR Part# 133-726 138-704 1 138-702 0 138-703 0 138-701 0 139-704 0 139-701 0 139-702 0 135-1242 16 135-1239 15 105-499 62 105-953 62 135-979 0 136-070 0 105-383 0 105-466 0 135-921 0

02

133-728 1 0 0 0 0 0 0 16 15 30 62 32 48 32 0 0

133-787 0 1 1 0 0 0 0 17 17 68 68 0 0 0 0 0

CHAIN ASSEMBLIES 133-790 133-746 134-726 0 1 0 1 1 0 1 0 0 1 0 0 0 0 1 0 0 0 0 0 0 19 20 16 19 19 15 76 78 62 76 78 62 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

134-736 0 0 0 0 1 1 0 18 17 70 70 0 0 0 0 0

134-747 0 0 0 0 1 0 1 20 19 38 78 0 0 0 40 40

134-756 0 0 0 0 1 0 2 24 23 94 94 0 0 0 0 0

ID0449257

71

70K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9

1 1 1 1 1 1 1 1 1

134-726 134-736 134-747 134-756 133-726 133-728 133-787 133-790 133-746

DESCRIPTION

REMARKS

P70K 2P DURA 62P 6.6 P70K 2P DURA 70P 6.8 P70K 2P DURA 78P 8.1 P70K 2P DURA 94P 6.62 70K 2P DURA 62P 6.6 70K 2P DURA 62P 9.62 70K 2P DURA 68P 6.6 70K 2P DURA 76P 6.6 70K 2P DURA 78P 6.8"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-704 70K DIGGING CHAIN STD 2P (62P) 138-702 70K DIGGING CHAIN STD 2P (16P) 138-703 70K DIGGING CHAIN STD 2P (52P) 138-701 70K DIGGING CHAIN STD 2P (8P) 139-704 70K DIGGING CHAIN PREMIUM 2P (62P) 139-701 70K DIGGING CHAIN PREMIUM 2P (8P) 139-702 70K DIGGING CHAIN PREMIUM 2P (16P) 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 135-1239 DURATOOTH, LEFT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 135-979 CHAIN SPACER (2.155") 136-070 SPACER 105-383 SPECIAL BOLT (3/4-NC X 6", GD8) 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 135-921 TOOTH SPACER

FOOTNOTES:

NOTE:

1. 70K STANDARD REPAIR STATION KIT 135-1182, 70K PREMIUM REPAIR STATION KIT 135-1187, 70K MASTER PIN 135-501, & 70K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0449257

72

70K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

4 1

5

2 3

6

REPAIR Part# 138-704 138-701 138-702 138-703 139-704 139-701 139-702 135-973 135-974 135-975 135-976 135-979 135-980 105-322 105-365 105-391 105-953

01

135-776 1 0 0 0 0 0 0 7 7 12 12 38 24 14 24 24 62

135-777 1 1 0 0 0 0 0 7 7 14 14 42 28 14 28 28 70

135-789 0 1 1 1 0 0 0 8 8 15 15 48 28 16 28 32 76

CHAIN ASSEMBLIES 135-778 135-779 137-776 1 1 0 0 0 0 1 2 0 0 0 0 0 0 1 0 0 0 0 0 0 9 10 7 9 10 7 15 18 12 15 19 12 46 56 38 32 38 24 18 20 14 32 38 24 28 36 24 78 94 62

7

137-777 0 0 0 0 1 1 0 7 7 14 14 42 28 14 28 28 70

8

137-778 0 0 0 0 1 0 1 9 9 15 15 46 32 18 32 28 78

ID0449274

73

70K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-776 135-777 135-789 135-778 135-779 137-776 137-777 137-778

DESCRIPTION

REMARKS

70K 2P ALG 62P 6.8 70K 2P ALG 70P 6.8 70K 2P ALG 76P 6.4" 70K 2P ALG 78P 6.8 70K 2P ALG 94P 6.8 P70K 2P ALG 62P 6.8 P70K 2P ALG 70P 6.8 P70K 2P ALG 78P 6.8

SEE F/N 1 SEE F/N1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-704 70K DIGGING CHAIN STD 2P (62P) 138-701 70K DIGGING CHAIN STD 2P (8P) 138-702 70K DIGGING CHAIN STD 2P (16P) 138-703 70K DIGGING CHAIN STD 2P (52P) 139-704 70K DIGGING CHAIN PREMIUM 2P (62P) 139-701 70K DIGGING CHAIN PREMIUM 2P (8P) 139-702 70K DIGGING CHAIN PREMIUM 2P (16P) 135-973 LEFT OUTSIDE BIT ADAPTER 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-975 LEFT INSIDE BIT ADAPTER 135-976 E.S. BIT ADPTR. RT. INSIDE 135-979 CHAIN SPACER, 70K 135-980 CHAIN SPACER (1.405") 105-322 BOLT (3/4-NC X 4.5") 105-365 BOLT (3/4-NC X 4") 105-391 BOLT (3/4-NC X 4.5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

1. USE INSERT BIT 136-101

NOTE:

1. 70K STANDARD REPAIR STATION KIT 135-1182, 70K PREMIUM REPAIR STATION KIT 135-1187, 70K MASTER PIN 135-501, & 70K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449274

74

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS

HAMMER 3 5

4

SLIDE HAMMER 3 1

2

H

801-056

75

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS REF PART NO. NUMBER

1.

2.

3.

4.

5.

259-002 259-001 259-036 105-403 105-357 183-072 259-003

QTY

1 1 2 1 1

DESCRIPTION

REMARKS

BIT PULLER - SLIDE HAMMER BIT PULLER - HAMMER BIT PULLER JAM NUT (5/8-NC) LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER

INCL REF NO.'S 1 - 5 EARLY STYLE

FOOTNOTES

NOTE:

H

801-056

76

SPECIAL TOOLS - ALIG BIT PUNCH

5

3

4

1 9 2 8

6

H

7

801-057

77

SPECIAL TOOLS - ALIG BIT PUNCH REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

259-150 105-708 105-964 105-994 183-072 259-003 259-151 259-152 259-153 105-357

QTY

DESCRIPTION

REMARKS

INCL REF NO.'S 1 THRU 8

2 1 1 1 1 1 1 1 1

BIT PUNCH - SLIDE HAMMER SET SCREW (3/8-NC X 3/8", NLK) WASHER (.656") FLG LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER HEAVY BIT PUNCH-SLIDE HAMMER LIGHT BIT PUNCH-SLIDE HAMMER PUNCH ADAPTER-SLIDE HAMMER LOCKNUT (5/8-NC)

FOOTNOTES

NOTE:

H

801-057

78

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

79

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

80

NOTES:

ID0134963

81

MISCELLANEOUS

82

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

83

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

84

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

85

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

86

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which are D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

87

88

ID0040564

89

ID0135281