Ditch Witch H732 / H752 H932 / H952 Parts Manual 053-094 PDF

H732/H752/ H932/H952 Parts Manual

Issue 17

053-094

1

H732 / H752 H932 / H952 ISSUE NO. 17PL-05/23 For Replacement Copy Order P/N 053-094

Attachments for – RT70, RT90 & RT115

This manual contains information concerning the following models: H732 / H932 Plow, H752 / H952 Combo Attachments

Copyright 2001, 2002, 2004, 2005, 2006, 2007, 2011, 2014, 2015, 2018, 2019, 2020, 2021, 2022, 2023 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Modularmatic, Jet Trac, Roto Witch, Subsite, Fluid Miser, Perma-Soil, Power Pipe, Super Witch, Super Witch II, Pierce Arrow, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication. However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration reference numbers. ♦ Have equipment model and serial number on hand to help ensure you get the right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 04

ID0128552

4

WARRANTY _________________________ DW WARRANTY Policy August, 2016

POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse, abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part

by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 05

ID0134872

5

CONTENTS______________________ Decals H732/H932 ......................................................... 8 H752/H952 ....................................................... 10 Plow/Combo Attachment Frame – H732/H932 ........................ 16 Attachment Frame – H752/H952 ........................ 18 Digging Chain Guard – H752/H952 ..................... 24 Drive Hose Clamp ............................................. 32 Head Shaft – H752/H952..................................... 20 Pivot – H752/H952 .............................................. 22 Plow Arm .......................................................... 26 Stow Lock ......................................................... 30 Vibrator Steering .............................................. 28 Booms Etc. Auger Parts....................................................... 36 Boom Tube ....................................................... 38 Boom, HD LTR Wear Bar .................................. 52 Boom, Roller – Non-wear Bar .............................. 48 Boom, Roller – Wear Bar .................................... 50 Boom, Small Tail Sprocket................................ 54 Chains, 110K Alligator ...................................... 76 Chains, 110K Combo ........................................ 70 Chains, 110K Duratooth ................. 66, 68, 72, 74 Chains, 70K Alligator ........................................ 64 Chains, 70K Duratooth ..................................... 62 Grease Cylinder Bracket – Non-wear Bar............. 58 Grease Cylinder Bracket – Wear Bar .................. 56 Grease Cylinders .............................................. 60 Mechanical Trench Cleaner ............................. 78 Personnel Restraint.......................................... 40 Roller ................................................................ 42 Roller, HD ......................................................... 44 Sprocket ........................................................... 46 Trench Cleaner Feed Tube ............................... 80

Schematics & Diagrams Electrical Diagram – Combo Switch ..................... 96 Hydraulic Schematic – H732/932 ....................... 98 Hydraulic Schematic – H752/952 ..................... 100 Hydraulics Blade Steer..................................................... 110 Control Valve ................................................. 116 Cylinder – 3.5” x 1.75” x 16” ............................... 126 Cylinder – 3” x 1.5” x 10” ................................... 124 Cylinder – 3” x 1.5” x 6” ..................................... 120 Cylinder – 3” x 1.5” x 8” ..................................... 122 Cylinder – 4” x 2.25” x 12” ................................. 128 Gearbox & Vibrator Drive – H752/952 ............. 114 Motor ............................................................. 118 Pivot Lift – H752/952 ........................................ 104 Plow Lift ......................................................... 108 Swing.............................................................. 106 Vibrator Drive – H732/932 ............................... 112 Accessories Attachment Sensor Mount – H752/952 ........... 148 Cable Guide.................................................... 138 Pipe Puller ...................................................... 146 Plow Blade ..................................................... 142 Plow Blade – H932/H952 ................................. 140 Special Tools – Alligator Bit Punch ...................... 134 Special Tools – Alligator Bit Puller....................... 136 Special Tools – Chain Jaws ................................ 132 Three Hole Plow Blades ................................. 144 Miscellaneous Bolt/Nut Torque Chart ................................... 152 Optional Kits .................................................. 158 Related Publications ..................................... 158 Replacement O-Ring Chart ............................ 157 Warranty Registration ................................... 160

Assembly Drawings Head Shaft Gearbox ......................................... 84 Hydraulic Control Levers ............................ 90, 92 Skid Shoes/Sod Cutter...................................... 88 Vibrator Assembly ............................................ 86

ID0135129

6

7

DECALS

8

DECAL LOCATION H732/H932 9 1

5

4

7

4 2 3

3 5 2 7 8

4 4

06

6

ID0091587

9

DECAL LOCATION H732/H932 REF PART NO. NUMBER

1 2

3 4 5 6 7 8 9

O6

275-841 275-848 275-093 273-158 270-6339 273-159 270-6343 275-326 274-318 274-442 275-023 275-184 275-284 273-165

QTY

DESCRIPTION

1 2 2 2 2 2 4 4 1 2 1 1

H732 DECAL KIT H932 DECAL KIT PLOW CONTROL H732 MODEL ID H732 MODEL ID H932 MODEL ID H932 MODEL ID WARNING CRUSHING WEIGHT TIE DOWN LOCATION LIFT LOCATION OIL LEVEL WARNING MOVING PARTS AMPLITUDE CHART PLOW CONTROL VALVE

REMARKS

(OLD STYLE) (NEW STYLE) (OLD STYLE) (NEW STYLE)

ID0091587

10

DECAL LOCATION H752/952

04

ID0091597

11

DECAL LOCATION H752/952 REF PART NO. NUMBER

1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

275-843 275-853 273-166 270-6315 273-167 270-6346 273-091 273-172 274-037 275-023 275-043 275-123 275-097 275-184 275-230 275-231 275-232 275-233 275-284 274-002 274-318 274-442 273-093 273-171

QTY

2 2 2 2 1 1 1 1 1 1 1 2 2 4 2 2 1 1 4 3 1 1

DESCRIPTION

DECAL KIT - H752 DECAL KIT - H952 H752 MODEL ID H752 MODEL ID H952 MODEL ID H952 MODEL ID DIGGING ATTACHMENT CONTROL CONTROL VALVE WARNING CRUSHING WEIGHT OIL LEVEL CHAIN TENSION DANGER CHAIN AND AUGER DANGER CHAIN AND AUGER WARNING MOVING PARTS DANGER STRIPE ( 1.75” X 18” ) DANGER STRIPE ( 2.75” X 18” ) DANGER STRIPE ( 1.75” X 18” ) DANGER STRIPE ( 2.75” X 18” ) AMPLITUDE CHART DANGER CHAIN AND AUGER TIE DOWN LOCATION LIFT LOCATION PLOW CONTROL COMBO SELECT

REMARKS

(OLD STYLE) (NEW STYLE) (OLD STYLE) (NEW STYLE)

FOOTNOTES

04

ID0091597

12

DECAL LOCATION H752/952

04

ID0091597

13

14

NOTES:

ID0134963

15

PLOW/COMBO

16

ATTACHMENT FRAME - PLOW

H732, H932

3 4 2 11

23

1

19 20 9

24 11

21 22

8 7

29

18 12

28

10

5

14

6 5

8

17

25

26 27

8

13 15 16

05

ID0025791

17

ATTACHMENT FRAME - PLOW H732, H932 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

1 ATTACHMENT FRAME 1 VALVE COVER 3 FLG LK SCREW (M8-1.25 X 25MM) 3 CLIP NUT (M8-1.25) 4 WASHER 2 SCREW (M20-2.50 X 300MM, 10.9) 2 LOCKNUT (M20-2.50, 10.9) 5 COMPOSITION BUSHING (1.75") 10 COUNTERWEIGHT 1 PIN 32 WASHER (M20, HARDENED) 1 FLG LK SCREW (M12-1.75 X 25MM) 1 COMPOSITION BUSHING (1.5") 1 PIN 1 TAPERED INSERT (1.5") 1 FLG SCREW (M16-2.00 X 30MM) 1 MACH BUSHING (1-1/2", 14GA) 1 EXTERNAL SNAP RING (1.500") 2 SPACER 2 WASHER (M16) 2 SCREW (M16-2.00 X 65MM, 10.9) 2 FLG NUT (M16-2.00, 10.9) 16 SCREW (M20-2.50 X 60MM) 16 HEX NUT (M20-2.50, 10.9) ZP 1 CYL (3.0 X 1.50 X 6.0) 1 DRAWBAR PLATE 14 FLG LOCKNUT (3/4-NC) 14 WASHER (3/4", HARDENED) 14 BOLT (3/4-NC X 2-3/4", GD8)

300-1583 316-823 106-381 106-551 105-422 107-204 106-665 125-773 375-080 309-756 106-399 107-009 125-538 178-699 181-974 106-471 110-220 115-466 184-840 106-392 106-666 106-355 106-474 106-374 151-086 324-655 105-340 106-949 105-339

DESCRIPTION

REMARKS

SEE FOOTNOTE 1

100 LBS EA.

USE LOCTITE 271

USE LOCTITE 271 SEAL REPAIR KIT 190-167 (3.0" X 1.50") USED ON HT115 ONLY & SEE FOOTNOTE 2 USED ON HT115 ONLY USED ON HT115 ONLY USED ON HT115 ONLY

NOT SHOWN:

FOOTNOTES:

1. ATTACHMENT FRAME 324-676 IS SUPERCEDED BY 300-1583. BEGINS WITH S/N________.

ATTACHMENT FRAME 337-373 IS SUPERCEDED BY 324-676. BEGINS WITH S/N 5Y0150.

2. USE OF DRAWBAR PLATE ITEM REF. 26 (324-655) REQUIRES ATTACHMENT FRAME 324-676 OR 300-1583.

NOTE:

05

ID0025791

18

ATTACHMENT FRAME - COMBO H752/H952

12

2

12 4

12

12 11

6

13 13

12

5

12

13

10 13 13 13

1

7 10

7 9

9 10

19 20 17 16

10

8

15

11 8

13 18

3 14 14

8 7 22

24 21

05

23

ID0153247

19

ATTACHMENT FRAME - COMBO H752/H952 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

1 CYL (3.0 X 1.50 X 8.0) 1 CYLINDER COVER 1 MOUNT ASS'Y 1 VALVE COVER 1 PIN 1 FLG LK SCREW (M12-1.75 X 25MM) 5 COMPOSITION BUSHING (1.75") 3 FLG SCREW (M16-2.00 X 30MM) 16 HEX NUT (M20-2.50, 10.9) ZP 32 WASHER (M20, HARDENED) 16 SCREW (M20-2.50 X 60MM) 8 FLG LK SCREW (M8-1.25 X 25MM) 8 CLIP NUT (M8-1.25) 3 FLG LK SCREW (M10-1.50 X 35MM) 1 TAPERED INSERT (1.5") 1 COMPOSITION BUSHING (1.5") 1 PIN 1 PIN (1.750" X 6.700) 1 EXTERNAL SNAP RING (1.500") 1 MACH BUSHING (1-1/2", 14GA) 2 FLG NUT (M16-2.00, 10.9) 2 SPACER 2 WASHER (M16) 2 SCREW (M16-2.00 X 65MM, 10.9)

151-136 305-863 363-426 305-862 309-756 107-009 125-773 106-471 106-374 106-399 106-474 106-381 106-551 106-993 181-974 125-538 178-699 178-587 115-466 110-220 106-355 184-840 106-392 106-666

DESCRIPTION

REMARKS

SEE FOOTNOTE 1

USE LOCTITE 271 USE LOCTITE 271 USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

1. INCLUDES SEAL REPAIR KIT 190-167

NOTE:

1. ATTACHMENT FRAME 337-374 IS SUPERCEDED BY ATTACHMENT FRAME 300-1606 HAVING SADDLE MOUNTED D-RING TIE DOWNS. H752 BEGINS WITH S/N________.

H952 BEGINS WITH S/N V60000069

05

ID0153247

20

HEAD SHAFT

H650/H750/H850/H752/H952

24 21

22

2

11 23

3

9 16

22

14 18

20

13 8

15

16 9 5

4

18

11

8

13

12

3

17 6

7

1

10 19

2

10

ID0092039

21

HEAD SHAFT

H650/H750/H850/H752/H952 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

105-384 105-961 105-423 105-497 105-970 110-058 110-078 125-258 125-259 142-009 140-717 145-475 145-476 155-805 166-055 166-056 166-057 167-147 180-071 181-499 184-027 184-044 105-828 361-123 105-071 116-348 105-829

QTY

DESCRIPTION

AR 2 2 16 8 AR AR 2 2 1 1 2 1 2 1 1 1 1 2 1 2

WASHER (3/4") BOLT (3/4-NC X 2") WASHER (3/4") CAM WASHER (5/8") FLG BOLT (5/8-NC X 1-3/4", GD8) MACH BUSHING (1.000", 18 GA) MACH BUSHING (1.000", 14 GA) TAPERED RACE (4.125") TAPERED BEARING (2.25") SPROCKET (3.067"A10) SPROCKET (3.067"A10, SPLIT) WASHER (3", NYLON) WAHSER (5", NYLON) INTERNAL SEAL (3.000") GEARBOX - 14.24:1 (LO) GEARBOX - 11.65:1 (STD) GEARBOX - 8.66:1 (HI) 12" HEADSHAFT BACKUP SPACER SPROCKET HUB SEAL SPACER SPACER FLG LK BOLT (1/2-NC X 3/4") WASHER (1/2") WASHER (1/2") BUMPER FLG LK BOLT (1/2-NC X 1")

1 1 2 2 1

REMARKS

USE LOCTITE 271 OR EQUIVALENT USE LOCTITE 271 OR EQUIVALENT

OPTIONAL & SEE FOOTNOTE 2

SEE FOOTNOTE 1 SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1. THIS SPACER (REF #19) IS USED IN PLACE OF GEARBOX WHEN SHIMMING HEAD SHAFT. 2. REFER TO INSTALLATION DIAGRAM #052-712.

3. IF 361-123 IS TO THICK SUBSTITUTE 319-182 WASHER (H752 & H952 ONLY).

NOTE:

10

ID0092039

22

PIVOT H752, H952

2

11 10

5

15 16

14

4 7

12 8

2

6

14

19 4

20 8

13

6 9

7

21 18

1

18

1.88

1.88

3

10 11

PIVOT SLEEVE DETAIL 05

ID0090377

23

PIVOT

H752, H952 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

QTY

105-293 5 106-356 6 105-371 6 106-486 6 106-345 1 181-504 2 115-781 2 125-782 2 145-853 1 145-977 1 145-1492 1 145-980 1 179-016 1 183-615 1 184-031 1 311-338 AR 165-723 AR 314-503 1 314-532 1 314-531 1 115-002 1 151-048 190-177 105-340 6

DESCRIPTION

BOLT (1/2-NC X 3/4") FLG NUT (M20-2.5, 10.9) BOLT (3/4-NC X 6-1/2") FLG SCREW (M20-2.5 X 90mm, 10.9) SCREW (M20-2.50 X 50mm) BUSHING KLIP RING (2.000") SPRING BUSHING (2.250") PIVOT PIVOT SLEEVE PIVOT SLEEVE PIVOT SLEEVE TAPERED PIN (57.1mm X 215mm) PIN TAPERED INSERT (2.25) SHIM SHIM PIVOT CAP WEAR STRIP CLAMP ZERK (02N90) CYL (4.0" X 2.25" X 12.0") SEAL REPAIR KIT (4.0" X 2.25") FLG LOCKNUT (3/4-NC)

REMARKS

USE LOCTITE 271 USE LOCTITE 271

SEE DETAIL FOR MOUNTING, SEE FOOTNOTE 1 SEE DETAIL FOR MOUNTING, SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. ZERK HOLES MAY NOT BE CENTERED ON SLOTS.

NOTE:

05

ID0090377

24

DIGGING CHAIN GUARD H752 / H952

18 1

18

2

10 3 7

4

6

14 13 9

11

5

8 12

17

9 7

16

6 15

05

ID0153108

25

DIGGING CHAIN GUARD H752 / H952 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

1 CHAIN GUARD 1 SPOILS FLAP 1 CRANK 1 SCREW (M10-1.50 X 40MM) 1 LOCKNUT(M10-1.50,PRV TRQ,10.9) 2 GAP FLAP 2 CLAMP BAR 3 FLG LOCKNUT (M6-1.00) 6 SCREW (M6-1.00 X 30MM, 8.8) 1 CLEVIS PIN (5/16" X 1") 1 COTTER PIN (.094 X .750) 1 CONTROL CABLE (16.30") 1 JAM NUT (5/16-NF) 1 BALL JOINT (5/16-NF) 1 ARM 1 NUT (5/16-NF) 2 FLG LK BOLT (3/8-NC X 1") 4 FLG LK SCREW (M12-1.75 X 35MM)

305-883 305-884 308-703 105-271 105-894 116-358 314-658 106-385 107-366 110-150 105-512 196-124 105-115 160-335 314-526 105-213 105-826 107-003

DESCRIPTION

REMARKS

USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0153108

26

PLOW ARM

H732, H752, H932, H952

4 3 10 2

9

30

3

8

43

4

44

5

3

1

21 15

4

7 13 9 20

10 9

7 27 31 9

9 21 31 42 36

13

15 14 29 12

13

11

19

41

28

2

6

33 9

7 40

22 3 4

30

7 44

4

38

39 21

24 16

43 12 13

37 32 17 32

34

25

25 24

18

37

14

4 35 23

4 24 25

26 25

11

24

8

ID0022924

27

PLOW ARM

H732, H752, H932, H952 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

QTY

DESCRIPTION

310-954 1 SWING POST 178-698 2 PIN (1.750" X 7.260") 105-416 4 WASHER (5/8") 106-471 7 FLG SCREW (M16-2 X 30mm) 314-792 1 UPPER PLOW ARM 313-406 1 UPPER PLOW ARM 179-967 1 PIN (1.50" x 12.20") 310-926 4 PIN CAP 107-010 5 FLG LK SCREW (M12-1.75 X 30mm) 125-538 6 COMPOSITION BUSHING (1.5") 125-421 AR CLEVITE BUSHING (1.750") 318-565 1 RADIUS ARM 116-348 4 BUMPER 105-071 AR WASHER (1/2") 105-828 4 FLG LK BOLT (1/2-NC X 3/4") 116-667 2 SHEAR MOUNT (7.12" SQ X 3" TH) 183-882 1 TAPERED PIN (44.4mm X 228.6mm) 125-773 - COMPOSITION BUSHING (1.75") 181-975 1 TAPERED INSERT (1.75") 183-883 1 PIN (50.8mm X 150mm) 184-064 1 TAPERED INSERT (2") 106-345 3 SCREW (M20-2.50 X 50mm) 178-782 1 PIN (2.00" X 11.47") 310-917 1 LOWER PLOW ARM 313-405 1 LOWER PLOW ARM 149-967 4 INTERNAL SEAL 125-486 4 COMPOSITION BUSHING (2") 310-920 1 PIN 183-876 1 TAPERED PIN (38.1mm X 215mm) 181-974 1 TAPERED INSERT (1.5") 125-754 - COMPOSITION BUSHING (2") 105-743 12 FLG LK SCREW (M12-1.75 X 45mm) 106-709 12 FLG LK NUT (M12-1.75) 116-520 2 WASHER (M46, RUBBER) 110-220 2 MACH BUSHING (1-1/2", 14GA) 125-545 AR MACH BUSHING (18 GA, 1-1/2") 151-085 - CYL (3.5" X 1.75" X 16") 190-174 - SEAL REPAIR KIT (3.5" X 1.75") 105-416 1 WASHER (5/8") 105-071 AR WASHER (1/2") 110-054 AR MACHINERY BUSHING (1-3/4", 14GA) 323-291 1 SWING LATCH 179-839 1 BOSS 181-928 1 BUSHING 107-008 1 FLG LK SCREW (M12-1.75 X 50mm) 105-318 AR WASHER (7/8") 107-598 2 SCREW (M16 X 60mm 10.9) 106-398 2 WASHER (M16, HARDENED)

REMARKS

USE LOCTITE 271 H932, H952 H732, H752 SEE FOOTNOTE 1

USE LOCTITE 271

SEE "PIVOT LIFT HYDRAULICS" PAGE

USE LOCTITE 271

H932, H952 H732, H752

SEE "PIVOT LIFT HYDRAULICS" PAGE

SEE "PIVOT LIFT HYDRAULICS" PAGE SEE "PIVOT LIFT HYDRAULICS" PAGE

2X FOR H732/H932 2X FOR H732/H932 2X FOR H732/H932 2X FOR H732/H932

FOOTNOTES:

1.

11

USE 2X 107-598 (REF #43) & 2X 106-398 (REF #44).

BEGINS WITH S/N 5Y0130

ID0022924

28

VIBRATOR STEERING H732, H752 H932, H952, H1032, H1052

3

4 13

2 4

15

12

16

3

3 8 23

23 20 22

11 10

17 19

5

15

21 22 20

7

16

6

9

3

18

4

1

6 5 14

8 18

8

1

HT115 & RT115Q

1

11

RT70, RT90, RT115

ID0027253

29

VIBRATOR STEERING H732, H752 H932, H952, H1032, H1052 REF PART NO. NUMBER

QTY

1 324-647 2 312-403 3 126-131 4 125-538 5 110-220 6 116-519 7 310-919 8 107-009 9 115-002 10 115-001 11 115-017 12 115-020 13 178-779 14 178-780 15 107-745 16 105-505 17 106-471 18 310-921 19 105-416 20 110-895 21 125-773 22 116-520 23 110-259

1 1 4 4 2 4 2 4 1 1 1 1 1 1 2 2 2 2 2 3 2 4 2

DESCRIPTION

REVERSIBLE LOWER CLEVIS UPPER CLEVIS THRUST BUSHING SET (1.5") COMPOSITION BUSHING (1.5") MACH BUSHING (1-1/2", 14GA) WASHER (M40, RUBBER) PIN FLG LK SCREW (M12-1.75 X 25MM) ZERK (02N90) ZERK (02N) ZERK (02N65) ZERK (02N) CLEVIS PIN (2.00" X 9.36") CLEVIS PIN (2.00" X 9.16") CASTLE NUT (1-1/2-NF) ROLL PIN (1/4" X 2-1/2") FLG SCREW (M16-2.00 X 30MM) PIN WASHER (5/8") MACHINERY BUSHING (1.750") COMPOSITION BUSHING (1.75") WASHER (M46, RUBBER) BOLT-ON CLAMP (.625")

REMARKS

SEE FOOTNOTE 1 USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

1. USE 125-545 AS NEEDED IN PLACE OF 110-220

NOTE:

11

ID0027253

30

31

32

33

34

NOTES:

ID0134963

35

BOOMS DIGGING CHAINS AUGER PARTS RESTRAINT BARS TRENCH CLEANERS

36

37

38

BOOM TUBE

5 2

1

4

3,6

04

ID0093140

39

BOOM TUBE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

QTY

100-736 100-737 105-065 AR 105-110 AR 140-1128 1 140-1129 1 140-1130 1 140-1131 1 143-023 1 143-024 1 143-025 1 143-026 1 143-035 1 143-036 AR 140-1176 1 140-1177 1 140-1178 1 140-1179 1

DESCRIPTION

SHORT TOP BAR KIT LONG TOP BAR KIT LOCKNUT (1/2-NC) BOLT (1/2-NC X 4-1/2") BOOM TUBE (51") BOOM TUBE (63.3") BOOM TUBE (75.5") BOOM TUBE (101.1") BOOM TUBE (52") BOOM TUBE (64.3") BOOM TUBE (76.5") BOOM TUBE (101.1") TOP WEAR BAR (SHORT) TOP WEAR BAR (LONG) HD BOOM TUBE (51") HD BOOM TUBE (63.3") HD BOOM TUBE (75.5") HD BOOM TUBE (101.1")

REMARKS

INCL REF NO.'S 1,2 & 4 INCL REF NO.'S 1,2 & 5 (4) PER 11.1" WEAR BAR,(6) PER 23.4" WEAR BAR (4) PER 11.1" WEAR BAR,(6) PER 23.4" WEAR BAR SEE FOOTNOTE 3, 62P/3P OR 96P/2P CHAINS SEE FOOTNOTE 3, 70P/3P OR 108P/2P CHAINS SEE FOOTNOTE 3, 78P/3P OR 120P/2P CHAINS SEE FOOTNOTE 3, 94P/3P OR 144P/2P CHAINS SEE FOOTNOTE 4, 62P/3P OR 96P/2P CHAINS SEE FOOTNOTE 4, 70P/3P OR 108P/2P CHAINS SEE FOOTNOTE 4, 78P/3P OR 120P/2P CHAINS SEE FOOTNOTE 4, 94P/3P OR 144P/2P CHAINS SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3, 62P/3P OR 96P/2P CHAINS SEE FOOTNOTE 3, 70P/3P OR 108P/2P CHAINS SEE FOOTNOTE 3, 78P/3P OR 120P/2P CHAINS SEE FOOTNOTE 3, 94P/3P OR 144P/2P CHAINS

NOT SHOWN:

FOOTNOTES:

1. FOR 70P/3P OR 108P/2P NON-WEAR BAR BOOM ARRANGEMENTS. 2. ONE (1) FOR 78P/3P OR 120P/2P NON-WEAR BAR BOOM ARRANGEMENTS, TWO (2) FOR 94P/3P OR 144/2P NON-WEAR BAR BOOM ARRANGEMENTS. 3. FOR PIVOTS WITH 5" ALIGNMENT PIN HOLE CENTERS, OR MODIFIED 8.5" PIN HOLE CENTER PIVOTS. 4. FOR PIVOTS WITH 8.5" ALIGNMENT PIN HOLE CENTERS.

NOTE:

04

ID0093140

40

PERSONNEL RESTRAINT

8

1 4

2

6

8

5 3

7 1 02

ID0139703

41

PERSONNEL RESTRAINT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

QTY

DESCRIPTION

100-735 BOOM FIT-UP KIT 105-340 10 FLG LOCKNUT (3/4-NC) 105-473 8 BOLT (3/4-NC X 5") 105-499 4 BOLT (3/4-NC X 1-3/4") 141-1218 1 RESTRAINT BAR-62P COMBO 141-1219 1 RESTRAINT BAR-70P COMBO 141-1220 1 RESTRAINT BAR-78P COMBO 141-264 1 PERSONNEL RESTRAINT BAR (52") 141-265 1 PERSONNEL RESTRAINT BAR (64.3") 141-266 1 PERSONNEL RESTRAINT BAR (76.55") 141-267 1 PERSONNEL RESTRAINT BAR (101.1") 143-009 1 LEFT AUGER BRACKET (12") 143-011 1 LEFT AUGER BRACKET (24") 143-010 1 RIGHT AUGER BRACKET (12") 143-012 1 RIGHT AUGER BRACKET (24") 143-022 1 ROCK GUARD 105-953 2 LOCKNUT (3/4-NC)

REMARKS

INCL. REF. NO.'S 1-3, 7 & 8

FOR 62P/3P OR 96P/2P CHAINS - H752/H952 & H1052 FOR 70P/3P OR 96P/2P CHAINS - H752/H952 & H1052 FOR 78P/3P OR 120P/2P CHAINS - H752/H952 & H1052 FOR 62P/3P OR 96P/2P CHAINS FOR 70P/3P OR 96P/2P CHAINS FOR 78P/3P OR 120P/2P CHAINS FOR 94P/3P OR 144P/2P CHAINS

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0139703

42

ROLLER (19" OD)

1

2 13 8

3 5 9

10

7

11

4 5

6 4

11 9 12

6 8 13

06

ID0129294

43

ROLLER (19" OD) REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

190-183 105-377 115-001 115-003 115-152 115-470 125-216 125-265 142-757 145-589 155-852 181-697 181-699 166-437 184-067

QTY

1 1 1 1 2 2 2 1 2 2 1 2 1 2

DESCRIPTION

REMARKS

BEARING/SEAL REPAIR KIT JAM NUT (1-1/2-NF) ZERK (02N) ZERK (1/4-NF, STR) PLUG (12N, SQ FM) INTERNAL SNAP RING (3.250") TAPERED RACE (3.265") TAPERED BEARING (1.5") LT ROLLER (3.067"P, 19") SPACER EXTERNAL SEAL (2.250") BEARING SPACER SEAL SLEEVE TAIL SHAFT SEAL SPACER

INCL REF NO.'S 4-6, 8-11 & 13 NON-SELF TAPPING SELF TAPPING

INCL REF NO.'S 2 & 3 ENDS WITH S/N

NOT SHOWN:

FOOTNOTES:

NOTE:

06

ID0129294

44

HD ROLLER 19"

2 3

8

10

9 6 5 7

4 4

9

6 FACTORY MATCHED BEARING ASSEMBLY (SEE FOOTNOTE 1)

BEARING

SPACER 8

7 11

10

1 11

1

7 10

RACE

07

6 9

SNAP RINGS

ID0113864

45

HD ROLLER 19" REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

1 1 1 1 1 2 2 1 2 2 1

141-626 115-003 115-152 125-546 129-013 157-308 141-629 141-625 141-627 157-309 107-920

DESCRIPTION

TAIL SHAFT NUT ZERK (1/4-NF, STR) PLUG (12N, SQ FM) BEARING ASSEMBLY LT ROLLER (3.067"P, 19.0") EXTERNAL SEAL (3.875") SEAL SLEEVE BOOM TAIL SHAFT SEAL SPACER V-RING SEAL BOLT (5/16-NC X 3/8 ", SOC)

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 4

NOT SHOWN:

FOOTNOTES:

1. REF. NO. 4 (BEARING ASSEMBLY) IS FACTORY MATCHED, DO NOT MIX CUPS, SONES, SPACERS, ETC. ASS'Y INCLUDES: 2X INT. SNAP RING, 2X TAP RACE, 2X TAP BEARING & BEARING SPACER 2. CHECK SURFACE OF SEAL BEFORE INSERTING SO PROPER SIDE FACES OUTSIDE 3. WIDER SIDE OF SEAL MUST BE INSTALLED FACING INSIDE 4. AFTER SETTING THE PRE-LOAD OF THE BEARING, REF. #11 (107-920) SHOULD FIT IN ONE OF THREE HOLES IN THE BOOM SIDE PLATE TO KEEP THE TAILSHAFT NUT FROM LOOSENING. NOTE:

07

ID0113864

46

47

48

49

50

51

52

53

54

SMALL TAIL SPROCKET BOOM

4

2 6 5 3 1

01

ID0139704

55

SMALL TAIL SPROCKET BOOM REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

140-543 140-544 105-319 105-340 105-473 143-043 184-089 184-090

QTY

1 5 5 1 5 5

DESCRIPTION

BOOM (2P) BOOM (3P) BOLT (3/4-NC X 1-1/2") FLG LOCKNUT (3/4-NC) BOLT (3/4-NC X 5") BOOM WASHER (.781") BOOM CROSS TUBE

REMARKS

INCL REF NO.'S 1 THRU 6; SEE FOOTNOTE 1 INCL REF NO.'S 1 THRU 6; SEE FOOTNOTE 1 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. BOOM ALSO CONTAINS APPROPRIATE SPROCKET AND HARDWARE; REFER TO PAGE TITLED "SPROCKET, 2" AND 3" PITCH". THIS BOOM MAY BE USED WITH A VARIETY OF CHAIN LENGTHS BY USING OPTIONAL BOOM TUBES; REFER TO PAGE TITLED "BOOM TUBE" 2. BOLT IS USED WITH BOTTOM TUBES DESIGNED FOR 3.067" PITCH CHAINS 70 PITCH AND LONGER. THE BOLT SCREWS INTO THE BOTTOM SURFACE OF THE BOOM TUBE AND ACTS AS A CYLINDER STOP AND BOOM MAIN FRAME SAFETY LUG.

NOTE:

01

ID0139704

56

GREASE CYLINDER BRACKET WEAR BAR BOOMS

8

1 6

5 7

4 3 11 10

12 2

BOOM TUBE

9 4 3

04

ID0093135

57

GREASE CYLINDER BRACKET WEAR BAR BOOMS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

105-340 105-473 105-829 105-884 143-001 143-002 150-749 150-748 183-641 183-642 184-089 159-093 115-019

QTY

5 5 4 4 1 1 1 1 1 1 5 1 5

DESCRIPTION

FLG LOCKNUT (3/4-NC) BOLT (3/4-NC X 5") FLG LOCK BOLT (1/2-NC X 1") WASHER (.531") LEFT GREASE CYL PLATE RIGHT GREASE CYL PLATE GREASE CYL (2.5" X 2.5" X 7")(HD) GREASE CYL (2"X1.5"X7")(STD) ROD PIN BARREL PIN BOOM CROSSBOLE WASHER (.781") RELIEF VALVE (5/8-NF, 02N) ZERK (02N)

REMARKS

USE LOCTITE 609 USE LOCTITE 609

SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 2 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. WEAR BAR BOOM PARTS ASSEMBLIES CONTAIN ALL PARTS ON THIS PAGE EXCEPT THE GREASE CYLINDER, WHICH MUST BE ORDERED SEPARATELY. REFER TO PARTS PAGE TITLED "GREASE CYLINDER".

2. RELIEF VALVE 159-093 AND ZERK 115-019 ARE INCLUDED WITH CYLINDERS 150-748 AND 150-749, AND ARE SHOWN HERE FOR REFERENCE AS SERVICE PARTS IF NEEDING TO ORDER SEPARATELY.

NOTE:

04

ID0093135

58

GREASE CYLINDER BRACKET NON-WEAR BAR BOOMS

7

6 5

4 10

1

3 11

9 2 BOOM TUBE

8 4 3

04

ID0093136

59

GREASE CYLINDER BRACKET NON-WEAR BAR BOOMS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

105-340 105-473 105-829 105-884 143-006 150-749 150-748 7. 183-641 8. 183-642 9. 184-089 8. 183-642 9. 184-089 10. 159-093 11. 115-019

QTY

DESCRIPTION

5 5 4 4 1 1 1 1 1 5 1 5 1 5

FLG LOCKNUT (3/4-NC) BOLT (3/4-NC X 5") FLG LOCK BOLT (1/2-NC X 1") WASHER (1/2") MOUNT BRACKET GREASE CYL (2.5" X 2.5" X 7") GREASE CYL (2" X 1.5" X 7") ROD PIN BARREL PIN WASHER (.781") BARREL PIN WASHER (.781") RELIEF VALVE (5/8-NF, 02N) ZERK (02N)

REMARKS

USE LOCTITE 609 USE LOCTITE 609

SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 2 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. NON-WEAR BAR BOOM PARTS ASSEMBLIES CONTAIN ALL PARTS ON THIS PAGE EXCEPT THE GREASE CYLINDER, WHICH MUST BE ORDERED SEPARATELY. REFER TO PARTS PAGE TITLED "GREASE CYLINDERS".

2. RELIEF VALVE 159-093 AND ZERK 115-019 ARE INCLUDED WITH CYLINDERS 150-748 AND 150-749, AND ARE SHOWN HERE FOR REFERENCE AS SERVICE PARTS IF NEEDING TO ORDER SEPARATELY.

NOTE:

04

ID0093136

60

GREASE CYLINDERS 7

3

5

8

4

6 1

7

2

8 10 12 13 11 9

05

ID0129299

61

GREASE CYLINDERS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

151-052 151-051 190-178 152-002 157-078 155-712 150-433 115-024 115-019 115-012 155-016 150-627 152-001 157-560 157-561 157-562

QTY

DESCRIPTION

1 1 1 1 1 1 1 1 1 1 1 1 1

GREASE CYL (2" X 1.5" X 7") GREASE CYL (2.5" X 2.5" X 7") SEAL REPAIR KIT (2.5" X 2.5") CYLINDER BARREL (2.0") O-RING (222 D70) BACKUP RING (222 D90) CYLINDER ROD (1.5") ZERK (02N, 5000PSI) ZERK (02N) ZERK (04N) RELIEF PLUG (04S) CYLINDER ROD (2.5") CYLINDER BARREL(2.5") PISTON SEAL (1.975") ROD WIPER (2.492") RETAINER RING (2.625")

REMARKS

INCL REF NO.'S 3 THRU 8, SEE FOOTNOTE 1 INCL REF NO.'S 7 THRU 13, SEE FOOTNOTE 1 INCL REF NO.'S 11 THRU 13

EARLY STYLE STANDARD CYLINDER EARLY STYLE HEAVY DUTY CYLINDER

NOT SHOWN:

FOOTNOTES:

1. CYLINDER 151-051 HAS BEEN SUPERSEEDED BY 150-749 AND CYLINDER 151-052 HAS BEEN SUPERSEEDED BY 150-748. SEE PARTS PAGES 807-617 FOR A VIEW OF COMPONENTS BELONGING TO 150-748 AND 150-749

NOTE:

05

ID0129299

62

70K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

4 1

3 2

6

7

8

9

5

REPAIR Part# 133-726 138-704 1 138-702 0 138-703 0 138-701 0 139-704 0 139-701 0 139-702 0 135-1242 16 135-1239 15 105-499 62 105-953 62 135-979 0 136-070 0 105-383 0 105-466 0 135-921 0

02

133-728 1 0 0 0 0 0 0 16 15 30 62 32 48 32 0 0

133-787 0 1 1 0 0 0 0 17 17 68 68 0 0 0 0 0

CHAIN ASSEMBLIES 133-790 133-746 134-726 0 1 0 1 1 0 1 0 0 1 0 0 0 0 1 0 0 0 0 0 0 19 20 16 19 19 15 76 78 62 76 78 62 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

134-736 0 0 0 0 1 1 0 18 17 70 70 0 0 0 0 0

134-747 0 0 0 0 1 0 1 20 19 38 78 0 0 0 40 40

134-756 0 0 0 0 1 0 2 24 23 94 94 0 0 0 0 0

ID0449257

63

70K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9

1 1 1 1 1 1 1 1 1

134-726 134-736 134-747 134-756 133-726 133-728 133-787 133-790 133-746

DESCRIPTION

REMARKS

P70K 2P DURA 62P 6.6 P70K 2P DURA 70P 6.8 P70K 2P DURA 78P 8.1 P70K 2P DURA 94P 6.62 70K 2P DURA 62P 6.6 70K 2P DURA 62P 9.62 70K 2P DURA 68P 6.6 70K 2P DURA 76P 6.6 70K 2P DURA 78P 6.8"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-704 70K DIGGING CHAIN STD 2P (62P) 138-702 70K DIGGING CHAIN STD 2P (16P) 138-703 70K DIGGING CHAIN STD 2P (52P) 138-701 70K DIGGING CHAIN STD 2P (8P) 139-704 70K DIGGING CHAIN PREMIUM 2P (62P) 139-701 70K DIGGING CHAIN PREMIUM 2P (8P) 139-702 70K DIGGING CHAIN PREMIUM 2P (16P) 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 135-1239 DURATOOTH, LEFT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 135-979 CHAIN SPACER (2.155") 136-070 SPACER 105-383 SPECIAL BOLT (3/4-NC X 6", GD8) 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 135-921 TOOTH SPACER

FOOTNOTES:

NOTE:

1. 70K STANDARD REPAIR STATION KIT 135-1182, 70K PREMIUM REPAIR STATION KIT 135-1187, 70K MASTER PIN 135-501, & 70K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0449257

64

70K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

4 1

5

2 3

6

REPAIR Part# 138-704 138-701 138-702 138-703 139-704 139-701 139-702 135-973 135-974 135-975 135-976 135-979 135-980 105-322 105-365 105-391 105-953

01

135-776 1 0 0 0 0 0 0 7 7 12 12 38 24 14 24 24 62

135-777 1 1 0 0 0 0 0 7 7 14 14 42 28 14 28 28 70

135-789 0 1 1 1 0 0 0 8 8 15 15 48 28 16 28 32 76

CHAIN ASSEMBLIES 135-778 135-779 137-776 1 1 0 0 0 0 1 2 0 0 0 0 0 0 1 0 0 0 0 0 0 9 10 7 9 10 7 15 18 12 15 19 12 46 56 38 32 38 24 18 20 14 32 38 24 28 36 24 78 94 62

7

137-777 0 0 0 0 1 1 0 7 7 14 14 42 28 14 28 28 70

8

137-778 0 0 0 0 1 0 1 9 9 15 15 46 32 18 32 28 78

ID0449274

65

70K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-776 135-777 135-789 135-778 135-779 137-776 137-777 137-778

DESCRIPTION

REMARKS

70K 2P ALG 62P 6.8 70K 2P ALG 70P 6.8 70K 2P ALG 76P 6.4" 70K 2P ALG 78P 6.8 70K 2P ALG 94P 6.8 P70K 2P ALG 62P 6.8 P70K 2P ALG 70P 6.8 P70K 2P ALG 78P 6.8

SEE F/N 1 SEE F/N1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-704 70K DIGGING CHAIN STD 2P (62P) 138-701 70K DIGGING CHAIN STD 2P (8P) 138-702 70K DIGGING CHAIN STD 2P (16P) 138-703 70K DIGGING CHAIN STD 2P (52P) 139-704 70K DIGGING CHAIN PREMIUM 2P (62P) 139-701 70K DIGGING CHAIN PREMIUM 2P (8P) 139-702 70K DIGGING CHAIN PREMIUM 2P (16P) 135-973 LEFT OUTSIDE BIT ADAPTER 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-975 LEFT INSIDE BIT ADAPTER 135-976 E.S. BIT ADPTR. RT. INSIDE 135-979 CHAIN SPACER, 70K 135-980 CHAIN SPACER (1.405") 105-322 BOLT (3/4-NC X 4.5") 105-365 BOLT (3/4-NC X 4") 105-391 BOLT (3/4-NC X 4.5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

1. USE INSERT BIT 136-101

NOTE:

1. 70K STANDARD REPAIR STATION KIT 135-1182, 70K PREMIUM REPAIR STATION KIT 135-1187, 70K MASTER PIN 135-501, & 70K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449274

66

110K DURATOOTH CHAINS (62P&70P) 2P CHAIN ASSEMBLIES GROUP 1

1

REPAIR Part# 133-420 138-411 1 135-1534 0 135-1239 15 135-1242 16 105-499 62 105-953 62 105-372 0 105-466 0 135-921 0 136-120 0 105-321 0 105-365 0 136-070 0 105-383 0 136-121 0

01

2

133-421 1 0 15 16 30 0 62 32 32 0 0 0 0 0 0

3

133-423 1 0 19 20 30 0 78 0 24 8 16 32 0 0 0

4

6

5

CHAIN ASSEMBLIES 133-459 133-460 133-461 0 0 0 1 1 1 17 17 18 18 18 17 70 34 34 70 70 70 0 0 0 0 36 0 0 36 0 0 0 0 0 0 0 0 0 0 0 0 54 0 0 36 0 0 0

133-462 0 1 22 22 32 88 0 0 30 9 20 36 0 0 0

7

8

133-463 0 1 23 24 94 126 0 0 24 4 16 16 0 0 4

ID0441443

67

110K DURATOOTH CHAINS (62P&70P) 2P CHAIN ASSEMBLIES GROUP 1 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

133-420 133-421 133-423 133-459 133-460 133-461 133-462 133-463

DESCRIPTION

REMARKS

110K 2P DURA 62P 7.0" 110K 2P DURA 62P 8.5" 110K 2P DURA 62P 12 110K 2P DURA 70P 7.0 110K 2P DURA 70P 8.5 110K 2P DURA 70P 10 110K 2P DURA 70P 12 110K 2P DURA 70P 15

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 135-1534 110K DIGGING CHAIN STD 2P (70P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 105-372 LOCKNUT (3/4-NC) 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 135-921 TOOTH SPACER 136-120 12" TOOTH ADAPTER 105-321 BOLT (3/4-NC X 3") 105-365 BOLT (3/4-NC X 4") 136-070 SPACER 105-383 BOLT (3/4-NC X 6", GD8) 136-121 BOLT (3/4-NC X 3")

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0441443

68

110K DURATOOTH CHAINS (78P & 94P) 2P CHAIN ASSEMBLIES GROUP 2

1

REPAIR Part# 133-430 135-1535 1 138-411 0 138-410 0 135-1239 19 135-1242 20 105-499 78 105-953 78 135-921 0 105-466 0 136-120 0 105-321 0 105-365 0 136-121 0

01

133-431 1 0 0 19 20 38 78 40 40 0 0 0 0

2

3

4

CHAIN ASSEMBLIES 133-433 133-434 133-440 1 1 0 0 0 1 0 0 2 24 26 23 25 26 24 38 104 94 98 140 94 30 30 0 0 0 0 10 4 0 20 20 0 40 16 0 0 9 0

5

6

133-441 0 1 2 23 24 46 94 48 48 0 0 0 0

ID0441478

69

110K DURATOOTH CHAINS (78P & 94P) 2P CHAIN ASSEMBLIES GROUP 2 REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

133-430 133-431 133-433 133-434 133-440 133-441

DESCRIPTION

REMARKS

110K 2P DURA 78P 7.0" 110K 2P DURA 78P 8.5" 110K 2P DURA 78P 12" 110K 2P DURA 78P 15" 110K 2P DURA 94P 7.0 110K 2P DURA 94P 8.5

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1535 110K DIGGING CHAIN STD 2P (78P) 138-411 110K DIGGING CHAIN STD 2P (62P) 138-410 110K DIGGING CHAIN STD 2P (16P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 135-921 TOOTH SPACER 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 136-120 12" TOOTH ADAPTER 105-321 BOLT (3/4-NC X 3") 105-365 BOLT (3/4-NC X 4") 136-121 BOLT (3/4-NC X 3")

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0441478

70

110K COMBO CHAINS 2P CHAIN ASSEMBLIES

1

2

REPAIR Part# 131-264 138-411 1 135-1534 0 135-1535 0 135-1239 6 135-1242 6 136-276 6 136-275 7 136-274 3 136-273 3 135-975 0 135-976 0 135-974 0 135-973 0 135-978 14 135-977 48 105-365 14 105-391 24 105-473 24 105-953 62

01

3

4

5

6

CHAIN ASSEMBLLIES: 131-266 131-268 131-269 131-270 0 0 1 0 1 0 0 1 0 1 0 0 7 7 6 7 6 8 6 6 7 8 0 0 7 8 0 0 4 4 0 0 4 4 0 0 0 0 7 7 0 0 6 7 0 0 3 4 0 0 3 4 16 16 14 16 54 62 48 54 16 16 14 16 26 30 24 26 28 32 24 28 70 78 62 70

131-271 0 0 1 7 8 0 0 0 0 8 8 4 4 16 62 16 30 32 78

ID0449237

71

110K COMBO CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

131-264 131-266 131-268 131-269 131-270 131-271

DESCRIPTION

REMARKS

110K 2P CMB DURA/SHK B 62P 6.0 110K 2P CMB DURA/SHK 70P 6.0" 110K 2P CMB DURA/SHK 78P 6.0" 110K 2P CMB DURA/ALG 62P 6.0" 110K 2P CMB DURA/ALG 70P 6.0" 110K 2P ALG B-O CMB 78P 6.0

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 135-1534 110K DIGGING CHAIN STD 2P (70P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 136-276 70/110K RT INSIDE BOLT-ON SHARK ADAPTER 136-275 70/110K LEFT INSIDE BOLT-ON SHARK ADPTER 136-274 70/110K LFT OUTSIDE BOLT-ON SHARK ADPTER 136-273 70/110K RT OUTSIDE BOLT-ON SHARK ADAPTER 135-975 LEFT INSIDE BIT ADAPTER 135-976 E.S. BIT ADPTR. RT. INSIDE 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-973 LEFT OUTSIDE BIT ADAPTER 135-978 CHAIN SPACER (1.593") 135-977 CHAIN SPACER (2.343") 105-365 BOLT (3/4-NC X 4") 105-391 BOLT (3/4-NC X 4.5") 105-473 BOLT (3/4-NC X 5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449237

72

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3

1

4 3 2

6

7

5 REPAIR Part# 134-420 139-411 1 139-412 0 135-1239 15 135-1242 16 105-499 62 105-953 62 105-466 0 135-921 0 136-070 0 105-383 0 135-977 0 136-071 0 105-365 0 105-321 0

02

134-421 1 0 15 16 30 62 32 32 0 0 0 0 0 0

CHAIN ASSEMBLIES 134-422 134-423 134-459 1 1 1 0 0 1 15 19 17 16 20 18 30 30 70 62 78 70 0 0 0 0 24 0 48 32 0 32 0 0 32 0 0 0 8 0 0 32 0 0 16 0

134-460 1 1 18 17 34 70 36 36 0 0 0 0 0 0

134-461 1 1 18 17 34 70 0 0 54 36 36 0 0 0

ID0449310

73

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7

1 1 1 1 1 1 1

134-420 134-421 134-422 134-423 134-459 134-460 134-461

DESCRIPTION

REMARKS

P110K 2P DURA 62P 7.0 P110K 2P DURA 62P 8.5 P110K 2P DURA 62P 10" P110K 2P DURA 62P 12" P110K 2P DURA 70P 7.0 P110K 2P DURA 70P 8.5 P110K 2P DURA 70P 10

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 139-412 110K DIGGING CHAIN PREMIUM 2P (8P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 135-921 TOOTH SPACER 136-070 SPACER 105-383 BOLT (3/4-NC X 6", GD8) 135-977 CHAIN SPACER (2.343") 136-071 10" - 12"" TOOTH ADAPTER 105-365 BOLT (3/4-NC X 4") 105-321 BOLT (3/4-NC X 3")

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0449310

74

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4

5 4

2

3

1

REPAIR Part# 134-462 139-411 1 139-410 0 139-412 1 135-1239 22 135-1242 22 105-499 32 105-466 0 105-953 88 105-321 20 105-365 36 135-921 30 136-070 36 136-071 9 136-088 0 105-383 0

01

CHAIN ASSEMBLIES 134-464 134-430 134-431 1 1 1 0 1 1 1 0 0 23 20 19 24 19 20 30 78 38 0 0 40 94 78 78 16 0 0 16 0 0 24 0 40 32 0 0 4 0 0 8 0 0 32 0 0

134-433 1 1 0 24 25 38 0 98 20 40 30 40 10 0 0

ID0449331

75

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4 REF PART NO. NUMBER

QTY

1 2 3 4 5

1 1 1 1 1

134-462 134-464 134-430 134-431 134-433

DESCRIPTION

REMARKS

P110K 2P DURA 70P 11 P110K 2P DURA 70P 15" P110K 2P DURA 78P 7.0 P110K 2P DURA 78P 8.5 P110K 2P DURA 78P 12

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

139-411 110K DIGGING CHAIN PREMIUM 2P (62P) 139-410 110K DIGGING CHAIN PREMIUM 2P (16P) 139-412 110K DIGGING CHAIN PREMIUM 2P (8P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 105-953 LOCKNUT (3/4-NC) 105-321 BOLT (3/4-NC X 3") 105-365 BOLT (3/4-NC X 4") 135-921 TOOTH SPACER 136-070 SPACER 136-071 10" - 12"" TOOTH ADAPTER 136-088 "14" - 16" TOOTH ADAPTER" 105-383 BOLT (3/4-NC X 6", GD8)

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449331

76

110K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

2

3

4

1

5

6

7 8

REPAIR Part# 135-485 138-411 1 139-411 0 139-412 0 139-410 0 138-410 0 135-1534 0 135-1535 0 135-976 12 135-975 12 135-974 7 135-973 7 135-978 24 135-977 38 105-365 24 105-473 24 105-322 14 105-953 62

01

135-486 0 0 0 0 0 1 0 14 14 7 7 28 42 28 28 14 70

135-487 0 0 0 0 0 0 1 15 15 9 9 32 46 32 28 18 78

CHAIN ASSEMBLIES 135-488 137-485 137-486 1 0 0 0 1 1 0 0 1 0 0 0 2 0 0 0 0 0 0 0 0 18 12 14 19 12 14 10 7 7 10 7 7 38 24 28 56 38 42 38 24 28 36 24 28 20 14 14 94 62 70

137-487 0 1 0 1 0 0 0 15 15 9 9 32 46 32 28 18 77

137-488 0 1 0 2 0 0 0 19 18 10 10 38 56 38 36 20 94

ID0449362

77

110K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-485 135-486 135-487 135-488 137-485 137-486 137-487 137-488

DESCRIPTION

REMARKS

110K 2P ALG 62P 6.7 110K 2P ALG 70P 6.6" 110K 2P ALG 78P 6.6" 110K 2P ALG 94P 6.8 P110K 2P ALG 62P 6.8 P110K 2P ALG 70P 6.8 P110K 2P ALG 78P 6.8 P110K 2P ALG 94P 6.8

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 139-411 110K DIGGING CHAIN PREMIUM 2P (62P) 139-412 110K DIGGING CHAIN PREMIUM 2P (8P) 139-410 110K DIGGING CHAIN PREMIUM 2P (16P) 138-410 110K DIGGING CHAIN STD 2P (16P) 135-1534 110K DIGGING CHAIN STD 2P (70P) 135-1535 110K DIGGING CHAIN STD 2P (78P) 135-976 E.S. BIT ADPTR. RT. INSIDE 135-975 LEFT INSIDE BIT ADAPTER 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-973 LEFT OUTSIDE BIT ADAPTER 135-978 CHAIN SPACER (1.593") 135-977 CHAIN SPACER (2.343") 105-365 BOLT (3/4-NC X 4") 105-473 BOLT (3/4-NC X 5") 105-322 BOLT (3/4-NC X 4.5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449362

78

79

80

81

82

NOTES:

ID0134963

83

ASSEMBLY DRAWINGS

84

HEADSHAFT GEARBOX - STANDARD DUTY H500, H600, H700, H800, H900

26

25

1 8 14

7 18 7

9 27 15 13 24

22

5 3

12 4

10 11 16 17 19 9 11 10

6 23 12

5 14 21 20

10

2

ID0093139

85

HEADSHAFT GEARBOX - STANDARD DUTY H500, H600, H700, H800, H900 REF PART NO. NUMBER

DESCRIPTION

REMARKS

INCLUDES REF NO.'S 1 THRU 24 INCLUDES REF NO.'S 1 THRU 24 INCLUDES REF NO.'S 1 THRU 24 H615/H610 H615/H610 INCLUDES REF NO.'S 14,18,19,21 & 24 INCLUDES REF NO.'S 14,18,19,21 & 24 INCLUDES REF NO.'S 14,18,19,21 & 24

1 6 12 2 2 AR AR AR 2 1 2 2 2 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 AR AR AR AR 1 1 1 1 4 1

GEARBOX - 14.24:1 (LO) GEARBOX - 11.65:1 (STD) GEARBOX - 8.66:1 (HI) GEARBOX - 14.24:1 (STD) GEARBOX - 11.65:1 (STD) LOW GEAR RATIO KIT STD GEAR RATIO KIT HI GEAR RATIO KIT DOWELL PIN (3/8" X 7/8") FLG LK BOLT (3/8-NC X 1") FLG LK BOLT (3/8-NC X 1-1/2") SQUEEZE BAND CLAMP (7/16") PLUG (08N, SQ, MAG) BULK HOSE (1/4", SOLD PER 1') BULK TUBING (1/4", SOLD PER 1') BULK TUBING (1/4"SOLD PER 1') BALL BEARING (1.968") BALL BEARING (2.165") GEARBOX SPACER TAPERED RACE (4.527") TAPERED BEARING (2.952") SLIP-ON COUPLER (02N-04H90) PICKUP TUBE (02N-02NF90-2") INTERNAL SEAL (2.875") AIR VENT (02N) GEAR OUTPUT PINION INPUT PINION (18T, 14-SPL) INPUT PINION (21T, 14-SPL) INPUT PINION (26T, 14-SPL) INPUT PINION (18T) INPUT PINION (21T) INPUT GEAR (66T, 19-SPL) INPUT GEAR (63T, 19-SPL) INPUT GEAR (58T, 19-SPL) FLANGE SHIM (.002") SHIM (.003") SHIM (.005") SHIM (.015") GEARBOX HALF GEARBOX HALF (MACHINED) BOLT LOCK MOTOR ADAPTER BOLT (1/2-NC X 1-1/4",CSK SOC) BALL BEARING (1.968")

1

BLACK SILCONE (10.67 OZ TUBE)

INCLUDED IN KITS 190-441,190-442 & 190-443

QTY

166-055 166-056 166-057 -

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

190-441 190-442 190-443 105-534 105-826 105-874 110-491 115-211 116-356 116-166 117-902 125-040 125-043 179-733 126-012 126-013 155-158 514-123 157-553 159-003 165-113 165-114 165-115 165-116 165-117 165-170 165-173 165-118 165-119 165-120 165-121 165-719 165-720 165-721 165-722 169-020 169-021 300-194 331-195 195-611 125-095

USE 1 @ 11.50" USE 1 @ 11.50" USE 1 @ 11.50"

STAMPED WITH GEARBOX RATIO

NOT SHOWN:

256-603

10

ID0093139

86

VIBRATOR ASSEMBLY

H732, H752, H932, H952 ENDS WITH S/N:CMWH932XEC0000206 & CMWH952_ _ _ _ _ _ _

25

2

22 26

16

18

1

24 11

12

19

14

19 14

10 8 15

11

7

3

8

13 23

10

6

12 14 11

17 18

7 4 6

21

14

18

7

5 9

6 11

10

15

9

6 7

23

SEE FOOTNOTE 7

10

SEE FTN 1

SEE FTN 1 20

21

2

19

16

ID0025164

87

VIBRATOR ASSEMBLY

H732, H752, H932, H952 ENDS WITH S/N:CMWH932XEC0000206 & CMWH952_ _ _ _ _ _ _ REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

QTY

310-836 1 324-629 1 166-620 2 166-525 1 185-506 1 166-524 1 185-507 1 107-521 2 185-115 4 185-111 4 185-136 4 165-929 4 106-355 4 106-089 8 106-619 4 105-1669 8 106-398 4 105-059 16 125-526 4 115-498 2 106-916 8 105-536 4 106-355 28 105-744 20 106-341 8 106-398 28 312-760 3 106-806 12 155-138 2 110-111 1 178-345 6 315-731 2 155-748 1 152-150 1

DESCRIPTION

VIBRATOR FRAME VIBRATOR FRAME VIBRATOR COVER RIGHT SHAFT RIGHT SHAFT LEFT SHAFT LEFT SHAFT SCREW (M12-1.75 X 20mm) VIBRATOR WEIGHT VIBRATOR WEIGHT VIBRATOR WEIGHT KEY (3/8" X 2-29/64") FLG NUT (M16-2.00, 10.9) HEX NUT (M12-1.75, 10.9) SCREW (M16-2.00 X 130mm, 10.9) SCREW (M12-1.75 X 120mm) 10.9 WASHER (M16, HARDENED) WASHER (7/16") BEARING (SPHERICAL ROLLER) EXTERNAL SNAP RING (2.165") SCREW (M8-1.25 X 25mm, SOC) DOWEL PIN (.375" X 1-1/2") FLG NUT (M16-2.00, 10.9) SCREW (M16-2.00 X 185mm) SCREW (M16-2.00 X 70MM) WASHER (M16, HARDENED) PLATE FLG LK SCREW (M12-1.75 X 25MM) PLUGS (16S) SIGHT GAUGE (16S) TENSION BUSHING (2.375) BEARING RETAINER O-RING (916 D90) PLUG, MAGNETIC (-16S)

REMARKS

OBSOLETE, ENDS WITH SERIAL NO. 5Y0129 BEGINS WITH SERIAL NO. 5Y0130 SEAL WITH SILICONE. SEE FOOTNOTES 2 & 3 OBSOLETE INCLUDES GEAR & MOTOR DRIVE HUB. SEE F/N 4,5 & 6.

OBSOLETE INCLUDES GEAR. SEE F/N 4,5 & 6.

H932, H952 HEAVY WEIGHTS H932, H952 STANDARD WEIGHTS H732, H752 H932, H952 TORQUE TO 175 FT LB (240 N m).

H732, H752 TORQUE TO 70 FT LB (95 N m).

H932, H952 USE LOCTITE # 271 H732, H952 USE LOCTITE # 271 H932, H952 & SEE FOOTNOTE 1 H732, H752 SEE FOOTNOTE 6

TORQUE TO 175 FT LB (240 N m)

INCL REF NO. 25, O-RING

INCL REF NO. 25, O-RING

FOOTNOTES:

1. H932/H952 M16 WASHER THIS SIDE ONLY WHEN USING FLANGE FACE NUT (REF #8) 106-355.

2. 166-371 VIBRATOR COVER IS REPLACED WITH 166-620 COVER. COVERS MUST BE USED IN PAIRS, DO NOT MIX COVERS ON THE SAME VIBRATOR ASSEMBLY. USE 166-620 FOR ALL REPLACEMENTS. 3. 166-620 IS USED ON: H732 BEGINS WITH S/N J60000001 H752 BEGINS WITH S/N 50000001 H932 BEGINS WITH S/N 5Z0808 H952 BEGINS WITH S/N 5Z0798 4. 166-525 RT. SHAFT ASS'Y. IS SUPERCEDED BY 185-506 166-524 LFT. SHAFT ASS'Y. IS SUPERCEDED BY 185-507.

DO NOT MIX OLD/NEW PARTS IN THE SAME VIBRATOR ASSEMBLY. USE 185-506/185-507 FOR ALL REPLACEMENTS. 5. 185-506/185-507 IS USED ON:: H732, BEGINS WITH S/N J60000001 H752, BEGINS WITH S/N A60000015 H932, BEGINS WITH S/N J60000056.

H952, BEGINS WITH S/N K60000052.

6. REQUIRES ASS'Y KIT 190-1086. TAPERED BEARING ALIGNMENT PINS & BEARING DRIVER (SPECIAL TOOLS).

7. NOT SHOWN: WELD-IN REPLACEMENT UPPER BOSS P/N 300-5334. USE ONLY IN PAIRS.

16

ID0025164

88

89

90

HYDRAULIC CONTROL LEVERS

2

3 1 10 9

14

8 9 12

4

7

5 13

6

11 04

ID0025235

91

HYDRAULIC CONTROL LEVERS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

QTY

116-921 3 116-941 1 110-439 2 106-561 3 179-883 3 179-886 3 300-2012 3 110-082 3 105-508 3 106-678 3 106-163 3 105-881 6 160-540 3 107-790 3 105-152 3 105-878 3 179-301 3

DESCRIPTION

HANDLE HANDLE (3/8-NC, GREEN) HANDLE (3/8-NC, BLACK) LOCKNUT (M8-1.25, PRV TRQ, 10.9) ROD (10.15") ROD (12.15") ROD (14.15") CLEVIS PIN (1/4" X 11/16") COTTER PIN (3/32" X 1") LOCKNUT (1/4-NF) FLG SCREW (M8-1.25 X 30mm) WASHER (5/16") ROD END CLEVIS YOKE (1/4-NF LH) NUT (1/4-NF) NUT (1/4-NF LH) BRONZE BUSHING (.375")

REMARKS

PLOW LIFT PLOW SWING, PLOW STEER H732 (12.25" AT MID POSITION) H932 (14.25" AT MID POSITION) H932/HT115 (16.25" AT MID POSITION)

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0025235

92

93

94

NOTES:

ID0134963

95

SCHEMATICS & DIAGRAMS

96

ELECTRICAL DIAGRAM COMBO SWITCH HARNESS

21001 PLOW/TRENCH SWITCH

2

ORG {5}

TAN/ORG {59}

1

TAN/ORG {59}

ORG {5}

TO SEAT HARNESS

-K03

ID0114849

97

ELECTRICAL DIAGRAM COMBO SWITCH HARNESS REF PART NO. NUMBER

QTY

DESCRIPTION

1.

2.

1 1

COMBO SWITCH HARNESS PLUNGER SWITCH

213-232 215-1455

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0114849

98

99

100

101

102

NOTES:

ID0134963

103

HYDRAULICS

104

PIVOT LIFT HYDRAULICS H752, H952 BEGINS WITH S/N _______

8

4 5

1 7 3 2 4 6 7

6

06

4

ID0090379

105

PIVOT LIFT HYDRAULICS H752, H952 BEGINS WITH S/N _______ REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

125-781 125-783 151-048 190-177 154-227 154-357 157-983 117-717 158-029

QTY

1 1 1 3 1 2 2 -

DESCRIPTION

REMARKS

COMPOSITION BUSHING (2.259") SPRING BUSHING (2.25") CYL (4.0" X 2.25" X 12") SEAL REPAIR KIT (4.0" X 2.25") CONNECTOR (06O-08S90) CONNECTOR (06O-08S90, ORF) HOSE (06OFX45S-42"-5000) ABRASION SLEEVE (1.00" X 40") HYD CONTROL VALVE (4-SPOOL)

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS CONNECTOR O-RINGS.

06

ID0090379

106

107

108

PLOW LIFT HYDRAULICS H732, H752, H932, H952

12 13

TO

TO

TO PO WE R RE

TU

15 BE

SU

PP

LY

14

YO ND

11 14

RN

10 4

9

7 1 3 6 2

4

8 4 5

05

ID0090315

109

PLOW LIFT HYDRAULICS H732, H752, H932, H952 REF PART NO. NUMBER

1. 125-754 2. 125-773 3. 151-085 190-174 4. 154-227 5. 154-806 6. 116-929 7. 117-714 8. 110-030 9. 117-718 10. 154-228 11. 514-294 12 158-029 158-030 13. 154-298 14 154-298 15 106-381

QTY

DESCRIPTION

1 1 1

COMPOSITION BUSHING (2") COMPOSITION BUSHING (1.75") CYLINDER (3.5" X 1.75" X 16") SEAL REPAIR KIT (3.5" X 1.75") CONNECTOR (06O-08S90) HOSE (06OFX-54"-3000) HOSE (06OFX45-36"-3000-AR) ABRASION SLEEVE (1.0" X 54") CABLE TIE (1/16" TO 4") ABRASION SLEEVE (1" X 36") UNION (06O-06OFX90) CONNECTOR (08S-06O, ORF) HYD CONTROL VAVLE (4-SPOOL) HYD CONTROL VALVE (3-SPOOL) CONNECTOR (10S-10o90) CONNECTOR (10S-10o90) FLG LK SCREW (M8-1.25 X 25mm)

3 1 1 1 1 1 1 1 1 2 4

REMARKS

H752, H952 H732, H932

NOT SHOWN:

FOOTNOTES:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

NOTE:

05

ID0090315

110

BLADE STEER HYDRAULICS H732, H752, H932, H952

24 23

10 9

8 6 6

22 7

13

20 12

16

11 5

1

15

17

18

14

19

3 17

2

21 20

4

4

1

22

21

06

ID0090349

111

BLADE STEER HYDRAULICS H732, H752, H932, H952 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

QTY

DESCRIPTION

151-029 2 CYL (3.0" X 1.5" X 10.0") 190-167 SEAL REPAIR KIT (3.0" X 1.5") 154-230 2 BRANCH TEE (06S-04O-04O) 154-250 2 CONNECTOR (04O-06S45) 153-865 2 HOSE (04OFX45-16"-3000-WG) 110-259 2 BOLT-ON CLAMP (.625") 154-724 2 HOSE (04OFX-82"-3000) 154-684 2 HOSE (04OFX-78-3000) 115-817 1 ABRASION SLEEVE (1.59" X 84") 117-312 1 ABRASION SLEEVE (1.59" X 80") 154-276 1 CONNECTOR (04O-08S90) 154-226 1 CONNECTOR (04O-06S90) 155-163 1 REDUCER (08S-06SF) 117-717 2 ABRASION SLEEVE (1.00" X 40") 515-156 2 HOSE (04OFX45-40"-3000) 154-255 2 UNION (04O-04OFX90) 154-355 2 BK CONNECTOR (04O-04O90BK) 106-387 1 FLG LOCKNUT (M10-1.50) 305-256 1 BACKUP SPACER 110-270 2 BOLT-ON CLAMP (9/16", HALF) 110-333 1 BOLT-ON CLAMP (1") 106-628 1 SCREW (M10-1.50 X 60mm) 107-009 - FLG LK SCREW (M12-1.75 X 25mm) 125-773 - COMPOSITION BUSHING (1.75") 125-538 - COMPOSITION BUSHING (1.5") 158-029 1 HYD CONTROL VALVE (4-SPOOL) 106-381 4 FLG LK SCREW (M8-1.25 X 25MM

REMARKS

SEE FOOTNOTE 1 H932, H952 H732, H752 H932, H952 H732, H752

SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1.

IF REPLACING OR REINSTALLING HOSE (12) ENSURE THAT THE MEASUREMENT ALONG THE HOSE BETWEEN FITTING (13) AND CLAMP (5) IS 10.75 IN (275 MM) WHEN INSTALATION IS COMPLETE, START TRACTOR AND STEER BLADE FULLY LEFT AND RIGHT. WATCH FOR ANY BINDING OR RUBBING

NOTE:

06

ID0090349

112

VIBRATOR DRIVE HYDRAULICS H732/H932

6

"B" BOTTOM PORT TO

P

10

13

P UM

TA

TO

9

TO MP PU

"A" TOP PORT

NK

12 6 9 8 3

7

"A" TOP PORT

11

1

"B" BOTTOM PORT

A B

2 4

04

5

ID0063306

113

VIBRATOR DRIVE HYDRAULICS H732/H932 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

QTY

158-752 1 158-286 1 190-625 1 154-306 2 154-234 1 106-547 2 105-159 4 515-400 2 117-198 2 515-059 1 154-389 2 154-390 1 110-930 AR 110-333 1 117-764 1

DESCRIPTION

HYDRAULIC MOTOR HYDRAULIC MOTOR SEAL REPAIR KIT CONNECTOR (12S-16O) CONNECTOR (08O-12S) SCREW (M12-1.75 X 40mm,10.9) CAM WASHER (1/2") HOSE (16OFX45-94"-6000) ABRASION SLEEVE (2.07" X 102") HOSE (08OFX45-94"-3000) BK CONNECTOR (16O-16OBK) BK CONNECTOR (08O) SPIRAL WRAP (1.5",SOLD PER 1') BOLT-ON CLAMP (1") ABRASION SLEEVE (1.59" X 90")

REMARKS

ENDS WITH S/N_____; OBSOLETE; USE SHAFT BEARING KIT 500-2043 BEGINS WITH S/N___. ; USE SHAFTAND BEARING KIT 500-2043, SEE FTN 1

40" (1000 mm)

NOT SHOWN:

FOOTNOTES:

NOTE:

1. MOTOR SHOULD BE TURNING COUNTER CLOCKWISE WHEN LOOKING AT THE SHAFT

04

ID0063306

114

GEARBOX & VIBRATOR DRIVE HYDRAULICS H752/H952

TO TO

42

20

PUM P

TAN K

17

18

39

MA NIF OLD

18 37 38

"B" BOTTOM PORT

"A" TOP PORT

22

34 21

T O P UM

TO PUM

7

29

31

P

P

2

9

15

28

TA

NK

12 9

7

2

24 TO

6

15 2

13

26 41

23 12

25

27

9

33

32

2 16

11

19

40

30 10

16

8 6 "B" BOTTOM PORT

14 36

03

2

3 "A" TOP PORT

35 A B

4 5

4 5

1

ID0139505

115

GEARBOX & VIBRATOR DRIVE HYDRAULICS H752/H952 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

QTY

149-748 1 158-286 1 190-625 1 154-306 5 154-234 1 106-547 2 105-159 4 515-400 2 117-198 2 149-223 1 154-290 3 154-322 1 154-258 1 149-660 2 153-243 1 190-093 1 158-710 1 157-454 1 156-273 2 159-077 2 105-073 105-022 157-209 158-805 1 500-576 217-770 158-631 154-226 4 154-678 1 515-093 1 515-462 1 154-727 1 307-460 1 105-624 2 106-386 2 105-883 1 106-499 2 153-248 1 153-249 1 515-224 1 154-377 1 115-935 2 154-396 1 110-930 AR 154-371 1 106-202 2 178-186 1 106-893 2 106-538 2 117-719 1 106-390 AR 515-186 1

DESCRIPTION

REMARKS

HYDRAULIC MOTOR HYDRAULIC MOTOR SEAL REPAIR KIT CONNECTOR (12S-16O) CONNECTOR (08O-12S) SCREW (M12-1.75 X 40mm,10.9) CAM WASHER (1/2") HOSE (16OFX45-94"-6000) ABRASION SLEEVE (2.07" X 102") HOSE (08OFX45-40"-3000) UNION (16O-16OFX90) CONNECTOR (08O-10S90) TEE (08O-08O-08O) HYD LINE (-16) HYD CONTROL VALVE SEAL KIT HYDRAULIC MOTOR HYDRAULIC MOTOR CONNECTOR (02N-04O90) SPLIT FLANGE (16SFL) LOCK WASHER (7/16") BOLT (3/8-NC X 4") O-RING (012 D90) HYD CONTROL VAVLE (4-WAY, 2 POS) REPAIR KIT SOLENOID COIL SOLENOID CONTROL VAVLE CONNECTOR (04O-06S90) HOSE (08OFX-86"-3000) HOSE (040FX90S-42"-3000) HOSE (04OFX90-22"-3000-AR) HOSE (04OFX90-30"-3000) VALVE BRACKET SCREW (M8-1.25 X 70mm, SOC) FLG LOCKNUT (M8-1.25) FLG LK BOLT (3/8-NC X 2") FLG BOLT (1/2-NC X 1-1/ 2", GD8) CONNECTOR (12S-16045, XL) CONNECTOR (16O-16OFX45) HOSE (08OFX90-21"-3000) CONNECTOR (12S-16O90) ABRASION SLEEVE (1.75" X 70") BK CONNECTOR (08O-08O90BK) SPIRAL WRAP (1.5",SOLD PER 1') CONNECTOR (12S-16O45) FLG BOLT (1/2-NC X 1-1/4", GD8) CLAMP PLATE SCREW (M6-1.00 X 55mm) LOCKNUT (M6-1.00, PRV TRQ, 10.9) ABRASION SLEEVE (1.75" X 36") WASHER (M10) HOSE (040FX90L-81"-3000)

ENDS WITH S/N____. ; OBSOLETE. USE SHAFT & BEARING KIT 500-2043 BEGINS WITH S/N___. ; SEE FOOTNOTE 1, SHAFT & BEARING KIT 500-2043

SEE "HYDRAULIC MOTOR" PAGE, OBSOLETE

40" (100 mm)

REFER TO "REMOTE CROWD HYD."

NOTE:

1. MOTOR SHOULD BE TURNING COUNTER CLOCKWISE WHEN LOOKING AT THE SHAFT

03

ID0139505

116

117

118

119

120

121

122

123

124

125

126

HYDRAULIC CYLINDER 3.5" X 1.75" X 16"

1

6 7 8 3 9 10 11 12 2 4 13 14

5

04

ID0109772

127

HYDRAULIC CYLINDER 3.5" X 1.75" X 16" REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

151-085 190-174 152-021 149-302 149-301 150-761 153-004 106-122 105-363 125-784 157-554 157-031 157-030 157-032 157-550 157-549

QTY

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

CYL (3.5" X 1.75" X 16") SEAL REPAIR KIT (3.5" X 1.75") CYLINDER BARREL LOCK RING (3.5) CYLINDER PISTON (3.5 X 1.75) CYLINDER HEAD (3.5 x 1.75) CYLINDER ROD (1.75 X 16.0) BOLT (7/8-NC X 2-1/4", GD8) WASHER (7/8") WEAR RING BACKUP RING (234 D90) O-RING (234 D90) O-RING (338 D90) BACKUP RING (338 D90) U-SEAL (1.750") WIPER SEAL (1.750")

REMARKS

INCLUDES REF NO'S: 1-5 & SEAL REPAIR KIT (190-174) INCLUDES REF NO'S: 6-14

SEE FOOTNOTE 1

NOT SHOWN:

259-040 259-238 259-244 259-245 259-188

U-SEAL INSTALLER (1.500" - UP) WIPER INSTALLER (1.75") PISTON SEAL INSTALLER (3.50") PISTON INSTALLER (3.5") CYL HEAD SPANNER - TWO-PIN

FOOTNOTES:

1. USE LOCTITE 277, TORQUE TO 410-460 FT-LBS (550-625 N.M).

NOTE:

04

ID0109772

128

129

130

NOTES:

ID0134963

131

ACCESSORIES

132

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

133

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

134

SPECIAL TOOLS - ALIG BIT PUNCH

5

3

4

1 9 2 8

6

H

7

801-057

135

SPECIAL TOOLS - ALIG BIT PUNCH REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

259-150 105-708 105-964 105-994 183-072 259-003 259-151 259-152 259-153 105-357

QTY

DESCRIPTION

REMARKS

INCL REF NO.'S 1 THRU 8

2 1 1 1 1 1 1 1 1

BIT PUNCH - SLIDE HAMMER SET SCREW (3/8-NC X 3/8", NLK) WASHER (.656") FLG LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER HEAVY BIT PUNCH-SLIDE HAMMER LIGHT BIT PUNCH-SLIDE HAMMER PUNCH ADAPTER-SLIDE HAMMER LOCKNUT (5/8-NC)

FOOTNOTES

NOTE:

H

801-057

136

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS

HAMMER 3 5

4

SLIDE HAMMER 3 1

2

H

801-056

137

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS REF PART NO. NUMBER

1.

2.

3.

4.

5.

259-002 259-001 259-036 105-403 105-357 183-072 259-003

QTY

1 1 2 1 1

DESCRIPTION

REMARKS

BIT PULLER - SLIDE HAMMER BIT PULLER - HAMMER BIT PULLER JAM NUT (5/8-NC) LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER

INCL REF NO.'S 1 - 5 EARLY STYLE

FOOTNOTES

NOTE:

H

801-056

138

CABLE GUIDE

H732, H752, H932, H952, H1032, H1052

9

10

11 12 2

1

4 7

6 5 3

8

08

ID0055286

139

CABLE GUIDE

H732, H752, H932, H952, H1032, H1052 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

QTY

DESCRIPTION

191-489 CABLE GUIDE KIT 318-884 1 CABLE GUIDE 185-541 1 CABLE GUIDE 184-453 7 SPACER TUBE 107-520 7 PIN (.375" X 3.75") 110-033 7 HAIR CLIP PIN (1/8" X 1/2") 117-207 7 SPRING 106-391 4 WASHER (M12) 106-333 4 SCREW (M12-1.75 X 40mm, 8.8) 106-354 4 FLANGE NUT (M12-1.75) 105-827 4 FLG LK BOLT (3/8-NC X 1-1/4") 105-874 4 FLG LK BOLT (3/8-NC X 1-1/2") 105-081 4 BOLT (3/8-NC X 3-1/4") 309-952 1 ROPS CABLE GUIDE 181-075 4 SLEEVE 105-814 4 FLG LOCKNUT (3/8-NC)

REMARKS

INCL. REF #'S 1-12 & SEE FOOTNOTE 2 OBSOLETE, SEE FOOTNOTE 2

OBSOLETE, SEE FOOTNOTE 1 FOR HT115 ONLY;

SEE FOOTNOTE 1

FOR HT115 ONLY;

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1- USE LOCTITE 242 OR EQUIVALENT. 2- KIT 191-182 HAS BEEN REPLACED BY KIT 191-489, REF #1.

CABLE GUIDE 185-541.

318-884 HAS BEEN REPLACED BY

NOTE:

08

ID0055286

140

PLOW BLADE

H932, H952 BEGINS WITH S/N: CMWH932XEC0000207 & CMWH952_ _ _ _ _ _ _

7 4 8

5

6 6

12

7

5

11

13 12 10 5

9

12 10 11 14

6

15

7 1

2 3

02

ID0288419

141

PLOW BLADE

H932, H952 BEGINS WITH S/N: CMWH932XEC0000207 & CMWH952_ _ _ _ _ _ _ REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

185-345 185-1081 185-281 179-738 105-446 106-067 105-514 179-961 178-347 105-423 105-379 178-345 185-1100 301-1580 185-352

QTY

1 1 1 2 6 6 6 2 1 2 2 6 1 1 1

DESCRIPTION

BULLET BLADE (1" X 3" X 24") FEED BLADE QT(28/32/36 X 2 X 10R) FEED BLADE (28/32/36 X 1.5 X 7.5R) PLOW BLADE PIN WASHER (1-1/2") CASTLE NUT (1-1/2-NF) COTTER PIN (.250 X 3.000) PLOW PIN SPACER PIN (2.00" X 5.50") WASHER (3/4") LK BOLT (3/4-NC X 1-1/4", NLK) TENSION BUSHING (2.375) PLOW BLADE PIN WING BOLT (1/2-NC X 3") CABLE GUIDE (2" X 10" X 36")

REMARKS

RECOMMENDED FOR QUAD TRACK, INCLUDES REF NO.'S 14 & 15 USE REPLACEMENT GUIDE 185-351 SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 1 & 2 SEE NOT SHOWN FOR OTHER LENGTHS.

NOT SHOWN:

191-401 190-1781 WING BOLTS: 106-072 185-1070 301-2277

KIT, LOWER BOSS MODIFIED VERTICAL PLOW BLADE MOUNT KIT

SEE FOOTNOTE 1 SEE FOOTNOTE 2

WING BOLT (1/2-NC X 1-1/4") WING BOLT (1/2-13 UNC X 1.50") WING BOLT (1/2-NC X 2 1/2")

BULLET BLADES: 185-346 185-356 185-357 185-345

1" X 3" X 30" 1" X 3" X 22"/26"/30" 1" X 3" X 28"/32"/36" 1" X 3" X 24"

FEED BLADES: 185-334 185-333 185-335 185-329 185-332 185-306 185-305 185-310 185-311 185-315 185-316 185-1091 185-283 185-284 185-285 185-1103 185-1110

FEED BLADE ASS'Y (1 X 7.38 X 30) FEED BLADE ASS'Y (1.5 X 6.63 X 30) FEED BLADE ASS'Y (1.5 X 6.63 X 36) FEED BLADE ASS'Y (2 X 6.63 X 36) FEED BLADE ASS'Y (2 X 10 X 30) FEED BLADE (22/26/30 X 1 X 9R) FEED BLADE (22/26/30 X 1 X 9R) FEED BLADE (22/26/30 X 1.5 X 9R) FEED BLADE (22/26/30 X 1.5 X 9R) FEED BLADE (22/26/30 X 2 X 10R) FEED BLADE (22/26/30 X 2 X 10R) FEED BLADE QT (28/32/36 X 1.5 X 7.5R) FEED BLADE (28/32/36 X 1.5 X 7.5R) FEED BLADE (28/32/36 X 2 X 10R) FEED BLADE (28/32/36 X 2 X10R) FEED BLADE QT (34/38/42 X 1.5 X 7.5R) FEED BLADE QT (34/38/42 X 2.0 X 10R)

USE REPLACEMENT GUIDE 186-614 USE REPLACEMENT GUIDE 186-639 USE REPLACEMENT GUIDE 185-228 USE REPLACEMENT GUIDE 185-216 USE REPLACEMENT GUIDE 186-790 USE REPLACEMENT GUIDE 185-353 NO TOE, USE REPLACEMENT GUIDE 185-353 USE REPLACEMENT GUIDE 185-354 NO TOE, USE REPLACEMENT GUIDE 185-354 USE REPLACEMENT GUIDE 185-355 NO TOE, USE REPLACEMENT GUIDE 185-355 USE REPLACEMENT GUIDE 185-351 , RECOMMENDED FOR QUAD TRACK NO TOE, USE REPLACEMENT GUIDE 185-351 USE REPLACEMENT GUIDE 185-352 NO TOE, USE REPLACEMENT GUIDE 185-352 USE REPLACEMENT GUIDE 185-1117 , RECOMMENDED FOR QUAD TRACK USE REPLACEMENT GUIDE 185-1118 , RECOMMENDED FOR QUAD TRACK

FOOTNOTES:

1. KIT #191-401 INCLUDES REF NO.'S: 5-8 & 12. KIT IS REQUIRED WHEN USING THE VERTICAL BLADE AND CONTAINS COMPONENTS TO CROSS TIE THE FIRST TWO HORIZONTAL PIN BOSS HOLES. THIS KIT MUST BE USED AT ALL TIMES, EVEN IF A PLOW BLADE IS NOT ATTACHED TO FRONT HOLES. 2. KIT #190-1781 INCLUDES REF NO.'S: 5, 6, 7 & 9-12. KIT IS REQUIRED WHEN MOUNTING A VERTICAL BLADE. KIT 191-401 SHOULD ALSO BE USED. NOTE:

02

ID0288419

142

PLOW BLADE

H732, H752, H932, H952 ENDS WITH S/N:CMWH932XEC0000206 & CMWH952_ _ _ _ _ _ _

13

3

8

2

12 1

10 9

13

5 11

2

3

10 8

12

7 4

6

09

ID0025227

143

PLOW BLADE

H732, H752, H932, H952 ENDS WITH S/N:CMWH932XEC0000206 & CMWH952_ _ _ _ _ _ _ REF PART NO. NUMBER

QTY

1. 178-347 1 2. 105-423 2 3. 105-379 2 4. 185-283 185-285 185-305 185-311 185-316 5. 106-023 1 106-024 1 106-025 1 6. 185-281 1 185-284 1 185-306 1 185-310 1 185-315 1 185-356 1 185-357 1 7. 185-355 1 185-354 1 185-353 1 185-352 1 185-351 1 8. 105-514 2 9. 179-738 1 10. 105-446 2 11. 179-961 2 12. 106-067 2 13. 191-401 1

DESCRIPTION

REMARKS

PIN (2.00" X 5.50") WASHER (3/4") LK BOLT (3/4-NC X 1-1/4", NLK) FEED BLADE (28/32/36X1.5X7.5R) FEED BLADE (28/32/36X2X10R) FEED BLADE (22/26/30X1X9R) FEED BLADE (22/26/30X1.5X9R) FEED BLADE (22/26/30X2X10R) WING BOLT (3/8-NC X 2") WING BOLT (3/8-NC X 2-1/2") WING BOLT (3/8-NC X 3") FEED BLADE(28/32/36X1.5 X 7.5R) FEED BLADE (28/32/36X2X10R) FEED BLADE (22/26/30X1X9R) FEED BLADE (22/26/30X1.5X9R) FEED BLADE (22/26/30X2X10R) BULLET BLD (1"X3"X22"/26"/30") BULLET BLD (1"X3"X28"/32"/36") CABLE GUIDE (2" X 10" X 30") CABLE GUIDE (1.5" X 9" X 30") CABLE GUIDE (1" X 9" X 30") CABLE GUIDE (2" X 10" X 36) CABLE GUIDE (1.5" X 7.5" X 36") COTTER PIN (.250 X 3.000) PLOW BLADE PIN WASHER (1-1/2") PLOW PIN SPACER CASTLE NUT (1-1/2-NF) KIT, LOWER BOSS

INCLUDES REF NO.'S 8-12. (H932) & SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. 191-401 IS REQUIRED FOR HT115/H932; IS RECOMMENDED FOR OTHER HEAVY PLOWING WITH RT90 THRU RT115.

NOTE:

09

ID0025227

144

145

146

PIPE PULLER .625" - 1.250"

1

2

3

02

ID0139361

147

PIPE PULLER .625" - 1.250" REF PART NO. NUMBER

QTY

1.

2.

3.

1 1 1

368-290 107-113 107-114

DESCRIPTION

PIPE PULLER (.625" TO 1.250") NUT (#12-24) EYE BOLT (#12-24 X 1-1/2")

REMARKS

INCLUDES REFERENCE NUMBERS 2 AND 3 INCLUDES REFERENCE NUMBER 2

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0139361

148

ATTACHMENT SENSOR MOUNT H752/H952 2.0 (3)

.5 2

1

3

5

6 2 1

7

4

8 3

9

1.5

5.3

C

(3)

808-886

149

ATTACHMENT SENSOR MOUNT H752/H952 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

QTY

220-556 2 107-895 4 315-745 2 145-853 337-374 214-105 24 105-047 2 110-373 2 105-156 2

DESCRIPTION

REMARKS

TDM BOOM SENSOR SCREW (#10-24 X 2-1/4", SOC HEAD) SENSOR MOUNT PIVOT ATTACHMENT FRAME FLEX GUARD (CONVOLUTED LOOM) LOCKNUT (3/8 NC) BOLT-ON CLAMP (13/16") BOLT (3/8-NC X 1-1/2")

FOOTNOTES

NOTE:

C

808-886

150

NOTES:

ID0134963

151

MISCELLANEOUS

152

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

153

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

154

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

155

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

156

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which are D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

157

158

H732 / H752 / H932 / H952 PLOW / COMBO ATTACHMENT Related Publications Component

Ass’y

P/N

Model: H732/752/932/952 Parts Manual ......................................................... ............ 053-094 H732/752/932/952 Operators ManuaL ................................................ ............ 054-077 H732/752/932/952 Repair Guide (Service Manual) ............................. ................ N/A H732/752/932/952 Supplementary Maint Guide - Trencher ................. ............ 050-633 H732/752/932/952 Digging Chain Guide (6 Volumes) ......................... ............ 050-700 H732/752/932/952 Special Tools Guide .............................................. ............ 052-901

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) .............................. 190-051 O-ring Repair Kit - Field Service (46 different O-rings) ..................................... 190-052

01

ID0143742

159

ID0040564

160

ID0135281