Ditch Witch H700 Series Parts Manual 053-409 - PDF DOWNLOAD

1

H700 Series ISSUE NO. 10PL-06/14 For Replacement Copy Order P/N 053-409

Attachments for - 7520 & 8020

This manual contains information concerning the following models: H710, H712 Digging, H730 Plow, H550 Combo & RLCR75 Reel Carrier Attachments

Copyright 1991, 1992, 1995, 1996, 2004, 2007, 2012, 2014 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Modularmatic, Jet Trac, Roto Witch, Subsite, Fluid Miser, Perma-Soil, Power Pipe, Super Witch, Super Witch II, Pierce Arrow, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

ID0135288

2

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment. 

Descriptions and specifications in this book were current at publication. However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.



Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.



Footnotes provide more information to help you identify parts shown in the manual.



Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.



Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts:  Specify parts you need by part number and description, not by illustration reference numbers.  Have equipment model and serial number on hand to help ensure you get the right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 03

ID0128552

3

4

WARRANTY__________________________ DW WARRANTY Policy July, 2005

POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by The Charles Machine Works, Inc. (CMW) that fail due to a defect in material or workmanship within one (1) year of first commercial use (Exception: 2 years for all SK500 Attachments). Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY All incidental or consequential damages.

All defects, damages, or injuries caused by misuse, abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

All engines and engine accessories (these are covered by original manufacturer’s warranty).

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part

by CMW or its authorized dealer. CMW will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. CMW reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or CMW. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact CMW’s Product Support Department, P.O. Box 66, Perry, OK 73077-0066, or contact your local Ditch Witch dealer.

Ver. 03

ID0134872

5

CONTENTS ________________________ Decals Decal Location – H530/H730 ..................... 54 Decal Location – H550/H750 ..................... 56 Decal Location – H610/H710 ....................... 8 Decal Location - H740 ........................... 118 Decal Location - RLCR75 ....................... 110

H512/H612/H710/H712 Dig. Attachments Attachment Frame – H512/H12/H712........... 14 Attachment Frame – H710/H615 ................. 12 Electrical Diagram – H612/H712 ................. 50 Gearbox Hydraulics ................................. 30 Head Shaft ............................................... 24 Hydraulics ............................................... 42 Hydraulic Cylinder - (1.7 x 75 x 9) ................ 44 Hydraulic Schematic – H510/H511/H710 ...... 46 Hydraulic Schematic – H612/712 ............... 48 Hydraulic Schematic – w/ Hyd. Trench ........ 28 Pivot – H510/H512/H610/H612/H712 ............... 20 Pivot – H615/H710 ...................................... 22 Pivot Lift Hydraulics ................................. 34 Slide Frame ............................................. 18 Spacer Frame .......................................... 16 Spoils Flap ............................................... 26 Trench Cleaner Hydraulics ....................... 38

H730 Plow/H750 Combo Attachment Attachment Frame H730............................ 62 Attachment Frame H750 ........................... 64 Blade Mount ............................................. 74 Drive Hose Clamp .................................... 76 Head Shaft ............................................... 78 Pivot H750 ............................................... 66 Plow Arms................................................ 70 Plow Blades ............................................. 80 Spoils Flap ............................................... 68 Stow Lock ................................................ 72

Pivot Lift Hydraulics H750 .......................... 92 Plow Swing Hydraulics ............................. 96 Vibratory Drive Hydraulics ........................ 98

Reel Carrier Reel Carrier Frame ................................ 112 Reel Carrier Hydraulics .......................... 114

H740 Earth Saw Attachment Frame.................................. 120 Cleaner .................................................. 126 Cutter Wheels ........................................ 122 Park Stand ............................................ 128 Saw Lift Hydraulics ................................. 134 Saw Motor Hydraulics ............................ 132 Spoils - Ends ............................................ 124 Stabilizer Hydraulics ............................... 136 Stabilizers .............................................. 130 Trench Cleaner Hydraulics ..................... 138

Booms, Chains, Auger Parts, Restraint Bars, Trench Cleaners Auger Parts ............................................ 162 Boom Tube ............................................ 142 Digging Chains ....................................... 164 Grease Cylinder Brackets ...................... 144 HD LTR Wear Bar Boom........................ 156 HD Roller 19” ......................................... 154 Hydraulic Trench Cleaner ....................... 194 Mechanical Trench Cleaner.................... 192 Personnel Restraint ................................ 190 Roller 19” ............................................... 160 Roller Boom ........................................... 150 Roller Boom – Wear Bar .......................... 152 Small Tail Sprocket Boom ...................... 148 Special Tools – Alligator Bit Punch ............. 198 Special Tools – Bit Puller for Alligator Bits .... 196 Special Tools – Chain Jaws ...................... 200 Sprocket ................................................. 158

Schematics and Diagrams Blade Steering Hydraulics – Begins ........ 104 Blade Steering Hydraulics – Ends .......... 106 Gearbox/Vibratory Drive Hyd ................. 100 Hydraulic Schematic H730 - Begins ............. 86 Hydraulic Schematic H730 - Ends ............... 84 Hydraulic Schematic H750 - Begins ............. 90 Hydraulic Schematic H750 - Ends ............... 88 Plow Lift Hydraulics ................................. 94

Assembly Drawings Cylinder - 151-029 (3 x 1.5 x 10) .................. 234 Cylinder - 151-032 (2 x 1.25 x 12) ................. 226 Cylinder - 151-043 (3 x 1.5 x 12) .................. 236 Cylinder - 151-048 (4 x 2.25 x 12) ................. 240 Cylinder - 151-049 (3 x 1.5 x 3) .................... 230 Cylinder - 151-050 (3.5 x 1.75 x 5) ................ 238 Cylinder - 151-054 (3 x 1.5 x 4) .................... 232 ID0134925

6

CONTENTS ________________________ Cylinder - 151-059 (4x2.25x16) .................... 242 Cylinder - 151-065 (2x1.25x20) .................... 228 Flow Control Valve ................................. 216 Grease Cylinder ..................................... 222 Grease Cylinders ................................... 220 Head Shaft Gearbox .............................. 204 Hydraulic Control Valve 1 Spool ............. 210 Hydraulic Control Valve 2 Spool ............. 212 Hydraulic Control Valve 3 Spool ............. 214 Hydraulic Control Valve .......................... 218 Hydraulic Motor ...................................... 208 Pipe Puller ............................................. 244 Reel Carrier Lift Cylinder ........................ 224 Vibrator ................................................. 206

Miscellaneous Bolt/Nut Torque Chart ........................... 248 Parts Manual Change Request ............. 253 Related Publications .............................. 252 Replacement O-Ring Chart ................... 251 Warranty Registration ........................... 256

ID0134925

7

DIGGING ATTACHMENTS

ID0135024

8

DECAL LOCATION H610/H710

2.00 12 10 2.00 10

11

13 12

13 11

19.50

10

1.00

1.50 4.88 10

12 10

11

11

11.25

11

3.25 9.75

02

ID0165803

9

DECAL LOCATION H610/H710

2

9

3 5

4

1

6

14

8

7

10

12

13

11

9 5.00

6.00

02

ID0165803

10

DECAL LOCATION H610/H710 REF PART NO. NUMBER

1.

2.

3.

4.

QTY

DESCRIPTION

275-642 802-881 274-002 274-279 274-284

1 1 1

DECAL KIT DECAL LOCATION DANGER CHAIN & AUGER ATTACHMENT SPD. DISPLAY ATTACHMENT SPD. CONTROL

274-296 274-055

2 2

H610 MODEL ID H710 MODEL ID

5.

274-034 1 274-305 1 274-454 1 274-306 1 274-455 1 7. 274-318 1 8. 275-043 1 9. 275-123 2 10. 275-230 2 11. 375-231 4 12. 275-232 2 13. 275-233 2 14. 274-442 3

REMARKS

ATTACHMENT CONTROL VALVE ATTACHEMENT LIFT CONTROL ATTACHEMENT LIFT CONTROL ATTACHEMENT LIFT W/CRUMBER ATTACHEMENT LIFT W/CRUMBER TIE-DOWN LOCATION CHAIN TENSION DANGER CHAIN & AUGER WARNING STRIP DECAL (1.75 X 18) WARNING STRIP DECAL (2.75 X 18) DANGER (1.75 X 18) DANGER (2.75 X 18) LIFT LOCATION

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0165803

11

12

ATTACHMENT FRAME H710/H615

45 33

32

8 38 36

17 23

35 30

13

37

21

42

40 2

43

11

16 3

26

11

41 8 14 3

39

8

25

8

13 44

13

13 15

7

15 12

22 29 10

18 20

4

9

1

24 12 8

19 1

27 6

4

28

24 5 34

01

31

8

ID0140543

13

ATTACHMENT FRAME H710/H615 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

105-071 106-078 105-137 105-293 105-302 105-357 105-425 105-826 105-829 105-833 105-834 107-011 105-873 105-919 106-038 106-039 106-083 115-480 116-348 116-351 116-353 116-480 116-535 116-562 116-393 314-663 331-172 362-817 362-845 315-493 315-497 315-525 315-498 315-499 315-500 315-501 362-638 105-385 331-220 331-300 331-225 331-228 105-003 331-301 116-479 106-161 362-751 362-803 331-371 362-854 106-385 363-412 106-551 106-381 362-823 315-526

QTY

DESCRIPTION

2 4 6 2 6 6 8 11 4 4 3 3 16 8 7 2 4 1 2 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 6 1 1 1 1 3 1 1 6

WASHER (1/2") NUT (M8) CLIPNUT (5/16-NC) BOLT (1/2-NC X 3/4") BOLT (5/8-NC X 2") LOCKNUT (5/8-NC) BOLT (1-NC X 2-1/2") FLG LK BOLT (3/8-NC X 1") FLG LK BOLT (1/2-NC X 1") FLANGE LOCKNUT (1/2-NC) FLANGE LOCKNUT (3/8-NC) CLIPNUT (3/8-NC) FLG LK BOLT (5/16-NC X 1") FLANGE NUT (1-NC) NUTSERT (5/16-NC) NUTSERT (3/8-NC) BOLT (M8-1.25 X 20mm) SNAP RING BUMPER (3" OD) BUMPER (1-5/32" OD) CUSHION CUSHION CUSHION CUSHION RUBBER FLAP CONTROL PANEL CONTROL PANEL CONTROL PANEL CONTROL PANEL FILLER VALVE COVER VALVE COVER CLAMP BAR DIFFERENTIAL SHIELD COVER ATTACHMENT FRAME CYLINDER TOWER COVER LOCK WASHER (5/8") VALVE PLATE VALVE PLATE VALVE PLATE BUMPER MOUNT ASS'Y (SHORT) FLG NUT (5/16-NC) COVER PLATE VALVE SEAL FLG BOLT (M6-1.0 X 20MM) CONSOLE COVER CONSOLE COVER CONSOLE COVER CONSOLE COVER FLG. LKNUT (M6) ANGLE BRACKET CLIPNUT (M8-1.25) FLG LK SCREW (M8-1.25 X 25MM) COVER VALVE BRACKET

6 1 2 2 2 1

REMARKS

H710 H615 - OLD STYLE, OBSOLETE H615 - NEW STYLE, OBSOLETE SEE FOOTNOTE 1 H710 H615 - OLD STYLE, OBSOLETE H615 - NEW STYLE, OBSOLETE SEE FOOTNOTE 1

H710 FOR 7020

H615/6520, OBSOLETE H615 H710 FOR 8020

H615 6520 OPERATOR STATION, OBSOLETE 6520 CAB, OBSOLETE SEE FOOTNOTE 1 - OPERATOR STATION SEE FOOTNOTE 1 - CAB H615 H710 FOR 7020 H710 FOR 7020 H710 FOR 7020

FOOTNOTES:

1- PART NUMBER'S 362-844 & 362-854 ARE USED WITH #116-562 (REF 21), #362-845 (REF 23) AND #331-299 (CONTROL VALVE LEAVER).

01

ID0140543

14

ATTACHMENT FRAME H512/H612/H712

32 11

31

29 22

11

8 16 5

7 21 6

12

25 21

6

27 20 19

8 9

11

29 11 15

11

5

15

28

18 17 10 19 11 20 11

18

1 30 33

23 13

11 23 12

24

26

3

4

15

4

11

11 16

02

14

2

ID0140105

15

ATTACHMENT FRAME H512/H612/H712 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

QTY

314-801 1 362-661 1 362-664 1 151-062 2 151-063 2 314-866 4 314-176 4 314-849 2 314-855 4 314-177 2 314-854 8 314-860 8 105-826 22 105-834 5 105-208 1 105-833 1 105-854 3 106-039 3 105-865 8 116-348 2 105-071 2 105-293 2 106-096 6 314-537 1 375-184 2 116-415 1 105-159 4 106-038 3 105-831 5 314-841 1 106-103 8 331-217 1 314-856 1 105-873 3 115-704 1

DESCRIPTION

ATTACHMENT FRAME CYLINDER COVER CLAMP GEARBOX COVER HYDRAULIC CLAMP HYDRAULIC CLAMP SLIDE TEE SLIDE-T 1.5WX3.75LX3.14H,HT CLAMP PLATE SLIDE PAD SLIDE PD 1.77WX14LX.375TK UHMW SLIDE PAD SLIDE PAD FLG LK BOLT (3/8-NC X 1") FLG LOCKNUT (3/8-NC) BOLT (1/2-NC X 1-1/4") FLG LOCKNUT (1/2-NC) CLIPNUT (3/8-NC) NUTSERT (3/8-NC) BOLT (1/4-NC X 3/4") BUMPER WASHER (1/2") BOLT (1/2-NC X 3/4") FLG BOLT (1/2-NC X 1-3/4") CYLINDER COVER CASTING FLAP CAM LOCKWASHER (1/2") NUTSERT (5/16-NC) FLG LK BOLT (1/2-NC X 1-1/2") SPOILS THROAT BOLT (1/4-NC X 1/2 ", BUT SOC) BUMPER MOUNT CLAMP BAR FLG LK BOLT (5/16-NC X 1") GROMMET EDGING

REMARKS

OLD STYLE, SEE FOOTNOTE 4

OLD STYLE, SEE FOOTNOTE 4

SEE FOOTNOTE 1

SEE FOOTNOTE 3

USE 6"

NOT SHOWN:

110-097 259-042 259-099

1 1 1

CLAMP PLUG WRENCH (1/2" SQ DRIVE) PLUG WRENCH (3/8" HEX DRIVE)

FOOTNOTES:

1-TO BE USED WOTH SLIDE TEES OF 3.0" LENGTH ONLY. -NOTE- NOT TO BE USED WITH SLIDE TEES OF 3.14' LENGTH. 2-USE THESE PADS ON TOP AND BOTTOM OF SLIDE TEES ON EARLY MODEL UNITS. 3-TO BE USED WITH 314-177 ONLY. 4-OLD STYLE PADS AND SLIDE-T'S ARE NOT INTERCHANGABLE WITH NEW STYLE

NOTE:

02

ID0140105

16

17

18

SLIDE FRAME H512/H612/H712

6

5 4

7

9

6

6

8 3

2

1

6

01

ID0140134

19

SLIDE FRAME H512/H612/H712 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

106-794 105-834 314-852 314-820 314-857 105-969 314-853 166-066 331-303

QTY

5 5 1 1 1 8 1 1 1

DESCRIPTION

REMARKS

BOLT (3/8-NC X 1-3/4", ALN HD GD8) FLG LOCKNUT (3/8-NC) LEFT END CAP SLIDE FRAME UPPER END CAP FLG BOLT (5/8-NC X 1-1/2") RIGHT END CAP RACK GEAR UPPER END CAP

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0140134

20

PIVOT

H510/H512/H610/H712

1

20

28

6

29

9

5 1 28

3

4 4 15

31 16 25

15 17 21 14

26

18

13 24

23

10

19

24 13 7

12

8 30

26

5

2

17

21

14

22

11 3

01

27

ID0140128

21

PIVOT

H510/H512/H610/H712 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

QTY

105-340 6 105-384 AR 105-394 2 105-421 6 105-423 2 105-497 16 105-826 3 105-854 2 105-970 8 106-202 4 110-058 AR 110-078 AR 125-258 2 125-259 2 125-782 2 142-009 1 142-010 1 140-717 1 140-732 1 145-475 2 145-476 1 145-830 1 145-977 1 155-805 2 166-055 1 166-056 1 166-057 1 168-001 1 168-006 1 167-147 1 180-071 2 181-499 1 184-027 2 184-044 1 311-338 AR 314-503 1 314-540 1 115-002 2

DESCRIPTION

LOCKNUT (1/4-NC) WASHER (3/4") BOLT (3/4-NC X 1-3/4") BOLT (3/4-NC X 3-1/2", GD 8) WASHER (5/8") CAM WASHER FLG LK BOLT (3/8-NC X 1") CLIP NUT (3/8-NC) FLG BOLT (5/8-NC X 1-3/4", GD 8) FLG BOLT (1/2-NC X 1-1/4", GD 8) MACHINERY BUSHING (18 GA) MACHINERY BUSHING (14 GA) RACE BEARING SPRING BUSHING HEADSHAFT SPROCKET (10T, 3" P) HEADSHAFT SPROCKET (14T, 2" P) SPLIT HEADSHAFT SPRKT (10T, 3" P) SPLIT HEADSHAFT SPRKT (14T, 2" P) SPACER SPACER PIVOT PIVOT SLEEVE INTERNAL SEAL GEAR BOX (14.24:1) GEAR BOX (11.65:1) GEAR BOX (8.66:1) GEARBOX (14.24:1) GEARBOX (11.65:1) HEAD SHAFT BACKUP SPACER SPROCKET HUB SEAL SPACER SPACER PIVOT CAP SHIM PIVOT CAP GEAR BOX COVER ZERK (02N90)

REMARKS

SEE FOOTNOTE 2

SEE FOOTNOTE 1 SEE FOOTNOTE 1 REFER TO SERVICE BULLETIN 052-712 & SEE FOOTNOTE 1 REFER TO SERVICE BULLETIN 052-712 & SEE FOOTNOTE 1

H500 SERIES, H712 H500 SERIES, H712 H500 SERIES, H712 H600 SERIES H600 SERIES

USE IN PLACE OF GEARBOX WHEN SETTING BEARING PRELOAD

NOT SHOWN:

259-009

SPROCKET WRENCH

FOOTNOTES:

1-IMPORTANT: WHEN INSTALLING NEW HEAD SHAFT SPROCKET MAKE SURE SPROCKET, HUB AND BOLT HOLES ARE FREE OF GREASE AND DIRT. USE THE CORRECT LENGHT OF BOLTS (BOLTS SHOULD NOT EXTEND ALL THE WAY THROUGH THE HUB) WITH CAM LOCK WASHERS. TORQUE BOLTS TO 260 FT-LBS (353 N.M). RETORQUE BOLTS AFTER ONE DAY OF OPERATION 2-USES FOUR (REF #10) TO MOUNT HYD. MOTOR TO GEARBOX FOR H510 & H512 - USES TWO (REF #10) TO MOUNT HYD. MOTOR TO MOTOR ADAPTER 331-195 FOR H610 & H612.

NOTE:

01

ID0140128

22

PIVOT

H615/H710

16 19

4 23

10

13

5

21 6 9

8 11

15 7

20

6

25

12

9

7 19 27

22 8 18

10 10

24 10

2

7 14

7

16

2

BOOMTUBE

17

3 26

04

1

ID0092038

23

PIVOT

H615/H710 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

QTY

105-302 18 105-340 10 105-357 18 105-906 10 106-122 1 181-504 2 115-001 5 115-781 2 125-782 2 145-476 4 145-854 1 145-855 1 145-856 1 145-860 1 145-869 2 145-871 2 145-872 1 145-873 1 125-1005 2 165-908 4 183-614 1 183-615 1 184-031 1 145-983 1 145-870 AR 105-385 18 135-962 4

DESCRIPTION

REMARKS

BOLT (5/8-NC X 2") FLG LOCKNUT (3/4-NC) LOCKNUT (5/8-NC) BOLT (3/4-NC X 8-1/2") BOLT (7/8-NC X 2-1/4") BUSHING ZERK (02N) EXTERNAL CLIP RING SPLIT STEEL BUSHING PIVOT SPACER LEFT PIVOT HALF RIGHT PIVOT HALF TOP TIE PLATE TIE PLATE THRUST STOP LONG PIVOT TUBE SHORT PIVOT TUBE LIFT ARM GROOVED PIVOT SLEEVE KEY (1/2" X 3-1/8") TAPERED PIN PIN TAPERED INSERT POLYURETHANE SLEEVE SHIM (14 GA) LOCK WASHER (5/8") SPACER

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0092038

24

25

26

SPOILS FLAP H615/H710

3

5 6

8

10

4

2

9 1 7

01

ID0140663

27

SPOILS FLAP H615/H710 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

QTY

105-115 1 105-213 1 105-512 1 110-150 1 115-780 1 145-857 1 160-335 1 184-048 1 196-124 1 105-359 AR

DESCRIPTION

REMARKS

JAM NUT (5/16-NF) LOCKNUT (5/16-NF) COTTER PIN (3/32" X 3/4") CLEVIS PIN (5/16") EXTERNAL KLIP RING SPOILS FLAP BALL JOINT (5/16-NF) BUSHING CABLE WASHER (5/8")

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0140663

28

HYDRAULIC SCHEMATIC

H510/H512/H710 WITH HYDRAULICS TRENCH CLEANER

CONTROL VALVE CONTROL LEVER LOAD CHECK

3

DOUBLE PILOT OPERATED CHECK

300 psi RELIEF ORIFICE

TRENCH CLEANER

02

BOOM LIFT

ID0140326

29

HYDRAULIC SCHEMATIC

H510/H512/H710 WITH HYDRAULICS TRENCH CLEANER REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE: 1. REFERENCE NUMBERS REFER TO CONNECTIONS ON MACHINE HYDRAULIC SCHEMATIC. 2. THE SELECTOR MANIFOLD IS SHOWN WITH THE SOLENOID VALVES SHIFTED TO THE POSITION THAT ALLOWS ATTACHMENT TO PLOW OR TRENCH. WHEN THE TWO SOLENIOD VALVES IN THE SELECTOR MANIFOLD ARE SHIFTED TO THE OTHER POSITION, THE DIGGING CHAIN CAN BE OPERATED IN REVERSE. SHIFTING THE DIGGING CHAIN SOLENOID VALVES IS CONTROLLED WITH THE ATTACHMENT DRIVE CONTROL LOVER.

02

ID0140326

30

31

32

33

34

PIVOT LIFT HYDRAULICS H510/H610/H710

7 19 3 TO TRACTOR

5

20

20

14

22

25

1 15

2 24 11 23 12

26

27 13

RETURN

12

21

28 29

9 16

6

18 8

4 10 8 02

6 17

ID0140132

35

PIVOT LIFT HYDRAULICS H510/H610/H710 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

105-003 105-190 105-530 106-122 110-082 181-504 110-505 115-781 125-781 125-783 151-048 151-059 12. 154-227 13. 154-723 14. 154-722 515-334 15. 158-570 158-669 16. 183-614 17. 183-615 18. 184-031 19. 314-543 360-920 365-295 20. 500-419 21. 154-357 154-356 22. 500-027 23. 154-418 154-227 154-323 24. 154-235 154-227 154-235 25. 154-227 154-418 26. 154-227 154-222 27.

515-454 NOT SHOWN: 28. 154-291 29. 154-324

QTY

3 3 1 1 1 2 1 2 1 1 1 1 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

FLG LOCKNUT (5/16-NC) BOLT (5/16-NC X 2-3/4") COTTER PIN (1/16" X 3/4") BOLT (7/8-NC X 2-1/4") CLEVIS PIN BUSHING KNOB (GRN, 1/2-NC) EXTERNAL KLIP RING FIBER BUSHING SPRING BUSHING CYL (4.0" X 2.25" X 12") CYL (4.0" X 2.25" X 16") CONNECTOR (08S-06O90) HOSE (06OFX-34"-4000) HOSE (06OFX-32"-3000) HOSE (10O-10O45-20"-3000) HYDRAULIC CONTROL VALVE HYDRAULIC CONTROL VALVE TAPERED PIN PIN TAPERED INSERT VALVE CONTROL HANDLE VALVE CONTROL HANDLE VALVE CONTROL HANDLE CONNECTOR LINK CONNECTOR (08S-06O90, ORF) CONNECTOR (08S-06O, ORF) HANDLE BRACKET CONNECTOR (08S-08OF90) CONNECTOR (08S-06O90) CONNECTOR (08S-10O90) CONNECTOR (08S-08O90) CONNECTOR (08S-06O90) CONNECTOR (O8S-08090) CONNECTOR (08S-06O90) UNION (08S-080FX90) CONNECTOR (08S-06O90) CONNECTOR (08S-06O) HOSE (10OFX90-20"-3000) CONNECTOR (10O90BK) CAP (100F)

REMARKS

H510 H710

H510/H710 H710 FOR 7020 H510/H710 H610/H615

H510 H710 H610/H615 H710 H615, H710 FOR 7020 H610/H615 H510/H710 H710 FOR 7020 H610/H615 H510/H710 H710 FOR 7020 H710 H710 FOR 7020 H710 H710 FOR 7020 H710 FOR 7020 H710 FOR 7020 FOOTNOTE 1

FOOTNOTES:

1. REMOVE CAPS WHEN INSTALLED TO MACHINE

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS CONNECTOR O-RINGS.

02

ID0140132

36

PIVOT LIFT HYDRAULICS H512/H712

7 21

19 22

20 23

24

25 3

28

26 5 2

1

27

15 11

9

12

8

16

6

13

18 12

13 10

4

8

6 17

01

12 14

ID0140157

37

PIVOT LIFT HYDRAULICS H512/H712 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

105-003 105-190 105-530 106-122 110-082 181-504 110-505 115-781 125-781 125-783 125-789 151-048 154-227 154-847 115-789 500-627 183-614 183-615 184-031 365-336 365-194 110-027 110-053 105-523 105-047 105-877 106-018 365-330 154-357 184-239

QTY

3 3 1 1 1 2 1 2 1 1 1 1 3 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2

DESCRIPTION

FLG LOCKNUT (5/16-NC) BOLT (5/16-NC X 2-3/4") COTTER PIN (1/16" X 3/4") BOLT (7/8-NC X 2-1/4") CLEVIS PIN BUSHING KNOB (1/2-NC, GRN) EXTERNAL KLIP RING FIBER BUSHING SPRING BUSHING SPRING BUSHING CYL (4.0" X 2.25" X 12") CONNECTOR (08S-06O90) HOSE (06OFX-78"-3000) ABRASION SLEEVE (3.66 ID X 54") HYDRAULIC CONTROL VALVE TAPERED PIN PIN TAPERED INSERT (2.25) VALVE CONTROL HANDLE VALVE CONTROL HANDLE CLEVIS CLEVIS PIN COTTER PIN (1/8' X 3/4") LOCKNUT (3/8-NC) BOLT (3/8-NC X 5-3/4") JAM NUT (3/8-NF) PUSH ROD CONNECTOR (08S-06O90) SPACER

REMARKS

H712 H512

ORIFICE

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS CONNECTOR O-RINGS.

01

ID0140157

38

TRENCH CLEANER HYDRAULICS H510/H610/H615/H710

7 19 1

3 5

2

22 20

22

8

8 17 6

18

15

4

16

23

9

11 9

13 14

12

10 12

01

ID0140567

39

TRENCH CLEANER HYDRAULICS H510/H610/H615/H710 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

100-182 100-183 100-184 100-185 105-003 105-190 105-530 105-033 110-082 105-150 110-531 154-276 125-800 154-783 154-695 154-669 154-684 151-032 154-252 154-811 154-701 154-702 154-653 154-651 305-256 110-270 363-293 105-089 314-543 360-920 365-295 331-299 500-027 154-355 500-419 154-355

QTY

3 3 1 1 1 1 1 2 2

1 2 2

1 2 1 1 1 1 1 1 1 2 1 2

DESCRIPTION

REMARKS

HYDRAULIC CLEANER KIT 42" TUBE HYDRAULIC CLEANER KIT 54.5" TUBE HYDRAULIC CLEANER KIT 67" TUBE HYDRAULIC CLEANER KIT 92" TUBE FLANGE NUT (5/16-NC) BOLT (5/16-NC X 2-3/4") COTTER PIN (1/16" X 3/4") BOLT (5/16-NC X 2", GD 8) CLEVIS PIN (1/4" X 11/16") BOLT (3/8-NC X 1-3/4") HANDLE (BLACK) CONNECTOR (04O-08S) FIBER BUSHING HOSE 04O-(24"-3000) HOSE (04OFX-38"-3000) HOSE (04OFX-50"-3000) HOSE (04O-78"-3000) CYL (2.0 X 1.25 X 12.0) CONNECTOR (04O-04S) HOSE (04O-116"-3000) HOSE (04OFX-14"-3000) HOSE 04O-(30"-3000) HOSE (04D-40"-3000) HOSE (04O-66"-3000) BACK-UP SPACER CLAMP (9/16") BAR LOCKNUT (5/16-NC) VALVE CONTROL HANDLE VALVE CONTROL HANDLE VALVE CONTROL HANDLE VALVE CONTROL HANDLE HANDLE BRACKET CONNECTOR (040) CONNECTOR LINK CONNECTOR (04O90BK)

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

42" CLEANER TUBE 54.5" CLEANER TUBE 67" CLEANER TUBE 92" CLEANER TUBE

42" CLEANER TUBE 54.5" CLEANER TUBE 67" CLEANER TUBE 92" CLEANER TUBE

H510 H710 FOR 8020 H615/H610, OBSOLETE SEE FOOTNOTE 2 H710 FOR 7020

NOT SHOWN:

FOOTNOTES:

1-KIT INCLUDES REF NO.'S 3-23 & P/N'S 141-336, 141-335, 105-110 (2 PER KIT) 105-065 (2 PER KIT).

2-PART #331-299 (REF 19) IS USED WITH 362-844, 362-854, 116-562 & 362-845.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS CONNECTOR O-RINGS.

01

ID0140567

40

41

42

43

44

45

46

47

48

49

50

51

52

NOTES:

ID0134963

53

PLOW/COMBO

ID0135202

54

55

56

57

58

59

60

61

62

63

64

ATTACHMENT FRAME H650/H750/H850

31

34

12

35

21 33 1

14 36

32

39 2

25

24

8

20

3

23 11

37

27 28

9 17 4

3

13

36

16

29

26 19 19

6 15

4

10 22

18

30 5

15 7

8

1 38

01

ID0140657

65

ATTACHMENT FRAME H650/H750/H850 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

QTY

106-387 5 106-078 4 105-137 8 105-819 6 105-854 2 105-831 4 105-832 6 105-245 9 105-919 10 105-826 2 106-167 10 106-083 4 110-097 1 116-353 1 116-480 1 116-535 1 116-562 1 15. 116-358 2 16. 259-042 1 17. 315-601 1 18. 315-612 1 19. 314-658 2 20. 315-618 1 331-388 1 21. 314-663 1 331-172 1 362-817 1 362-845 1 22. 315-619 1 23. 331-213 1 24. 331-234 1 331-307 1 331-602 1 25. 331-216 1 26. 363-426 1 27. 105-151 2 28. 105-128 2 29. 105-827 3 30. 105-814 3 31. 106-379 6 32. 106-395 6 33. 362-751 362-803 331-371 362-854 34. 331-171 1 35. 116-479 1 36. 105-873 8 37. 115-704 AR 38. 106-390 9 39. 362-823 2

DESCRIPTION

FLG LK NUT (M10-1.5) HEX NUT (M8-1.25) CLIP NUT (5/16-NC) FLG LK BOLT (1/4-NC X 1") CLIP NUT (3/8-NC) FLG LK BOLT (1/2-NC X 1-1/2") FLG NUT (1/4-NC) HEX SCREW (M10-1.5 x 25MM) FLG NUT (1-NC) FLG BOLT (3/8-NC X 1") BOLT (1-NC X 2") SCREW (M8-1.25 X 20MM) CLAMP (1/2") CUSHION CUSHION CUSHION CUSHION GAP FLAP PLUG WRENCH ATTACHMENT FRAME COMBO GUARD CLAMP BAR REAR COVER REAR COVER VALVE HANDLE COVER VALVE HANDLE COVER VALVE HANDLE COVER VALVE HANDLE COVER CYLINDER COVER VALVE MOUNT BRACKET VALVE PLATE VALVE PLATE VALVE PLATE VALVE PLATE BUMPER MOUNT LOCKNUT (7/16-NC) BOLT (7/16-NC X 1-1/4") FLG LK BOLT (3/8-NC X 1-1/4") FLG LK NUT (3/8-NC) FLG LK SCREW (M6-1.0 X 20MM) FLG LOCKNUT (M6) CONSOLE COVER CONSOLE COVER CONSOLE COVER CONSOLE COVER VALVE PLATE COVER SEAL FLG LK BOLT (5/16-NC X 1") GROMMET EDGING (1/4") WASHER (M10) COVER

REMARKS

FOR 1/2" SQ. WRENCH H750/H850 H650 OLD STYLE, OBSOLETE H650 NEW STYLE, OBSOLETE SEE FOOTNOTE 1 SPOILS 1/2" SQ. DRIVE

H850 FOR 7020 ONLY H750/H850 H650 OLD STYLE, OBSOLETE H650 NEW STYLE, OBSOLETE SEE FOOTNOTE 1 H650 ONLY H650 ONLY, OBSOLETE H650 H850 / 7020 ONLY H750/H850

H650, H850 FOR 7020 ONLY H650, H850 FOR 7020 ONLY 6520 OPERATOR MODULE, OBSOLETE 6520 CAB, OBSOLETE SEE FOOTNOTE 1 - OPERATOR STATION SEE FOOTNOTE 1 - CAB H650, H850 FOR 7020 ONLY H650, H850 FOR 7020 ONLY

FOOTNOTES:

1-PART NUMBER'S 362-844 ARE USED WITH #116-562 (REF 14, #362-844 (REF 33) AND #331-299 (CONTROL VALVE LEVER).

NOTE:

01

ID0140657

66

PIVOT

H650/H750/H850

2

10 5

14

13

15 4 7 8

2

6

14 11

18 4

8

6 9 12 7

2 16

1

17

3

01

ID0140450

67

PIVOT

H650/H750/H850 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

QTY

105-293 5 105-340 12 105-371 6 105-421 6 106-122 1 181-504 2 115-781 2 125-782 2 145-853 1 145-977 1 183-614 1 183-615 1 184-031 1 311-338 AR 165-723 AR 314-503 1 314-532 1 314-531 1 115-002 1

DESCRIPTION

REMARKS

BOLT (1/2-NC X 3/4") FLG LOCKNUT (3/4-NC) BOLT (3/4-NC X 6-1/2") BOLT (3/4-NC X 3-1/2") BOLT (7/8-NC X 2-1/4") BUSHING EXTERNAL CLIP RING SPLIT STEEL BUSHING 12" PIVOT PIVOT ADAPTER SLEEVE TAPERED PIN PIN TAPERED INSERT PIVOT CAP SHIM (.074" THK) PIVOT CAP SHIM (.036" THK) PIVOT CAP WEAR STRIP CLAMP ZERK (02N90)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0140450

68

SPOILS FLAP

H550/H650/H750/H850

6 8

10

7

3

14

13 5 12

4

2

11 1 9

01

ID0140130

69

SPOILS FLAP

H550/H650/H750/H850 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

QTY

105-115 1 105-213 1 105-512 1 105-826 2 110-150 1 115-480 1 115-780 1 116-351 1 160-335 1 184-048 1 196-124 1 314-526 1 314-636 1 105-359 AR

DESCRIPTION

REMARKS

JAM NUT (5/16-NF) NUT (5/16-NF) COTTER PIN (3/32" X 3/4") FLANGE LOCK BOLT CLEVIS PIN EXTERNAL SNAP RING EXTERNAL SNAP RING BUMPER BALL JOINT BUSHING CABLE RADIUS ARM SPOILS FLAP WASHER (5/8")

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0140130

70

71

72

73

74

75

76

77

78

HEAD SHAFT

H650/H750/H850/H752/H952

24 21

22

2

11 23

3

9 16

22

14 18

20

13 8

15

16 9 5

4

18

11

8

13

12

3

17 6

7

1

10 19

2

10

ID0092039

79

HEAD SHAFT

H650/H750/H850/H752/H952 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

105-384 105-961 105-423 105-497 105-970 110-058 110-078 125-258 125-259 142-009 140-717 145-475 145-476 155-805 166-055 166-056 166-057 167-147 180-071 181-499 184-027 184-044 105-828 361-123 105-071 116-348 105-829

QTY

DESCRIPTION

AR 2 2 16 8 AR AR 2 2 1 1 2 1 2 1 1 1 1 2 1 2

WASHER (3/4") BOLT (3/4-NC X 2") WASHER (3/4") CAM WASHER (5/8") FLG BOLT (5/8-NC X 1-3/4", GD8) MACH BUSHING (1.000", 18 GA) MACH BUSHING (1.000", 14 GA) TAPERED RACE (4.125") TAPERED BEARING (2.25") SPROCKET (3.067"A10) SPROCKET (3.067"A10, SPLIT) WASHER (3", NYLON) WAHSER (5", NYLON) INTERNAL SEAL (3.000") GEARBOX - 14.24:1 (LO) GEARBOX - 11.65:1 (STD) GEARBOX - 8.66:1 (HI) 12" HEADSHAFT BACKUP SPACER SPROCKET HUB SEAL SPACER SPACER FLG LK BOLT (1/2-NC X 3/4") WASHER (1/2") WASHER (1/2") BUMPER FLG LK BOLT (1/2-NC X 1")

1 1 2 2 1

REMARKS

USE LOCTITE 271 OR EQUIVALENT USE LOCTITE 271 OR EQUIVALENT

OPTIONAL & SEE FOOTNOTE 2

SEE FOOTNOTE 1 SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1. THIS SPACER (REF #19) IS USED IN PLACE OF GEARBOX WHEN SHIMMING HEAD SHAFT. 2. REFER TO INSTALLATION DIAGRAM #052-712.

3. IF 361-123 IS TO THICK SUBSTITUTE 319-182 WASHER (H752 & H952 ONLY).

NOTE:

10

ID0092039

80

81

82

NOTES:

ID0134963

83

HYDRAULICS

ID0135071

84

85

86

87

88

89

90

91

92

PIVOT LIFT HYDRAULICS H550/H650/H750/H850

9

5

12

6 8 11

10 13

10

1

3 2

4 7

4

01

ID0140155

93

PIVOT LIFT HYDRAULICS H550/H650/H750/H850 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

125-754 125-781 125-792 125-783 151-047 151-048 154-225 154-227 154-227 154-357 154-754 154-788 314-543 365-295 331-299 110-505 500-419 110-082 105-530 500-027

QTY

DESCRIPTION

REMARKS

1 1 1 1 1 1 2 1 1 1 2 2 1 1 1 1 1 1 1 1

FIBER BUSHING FIBER BUSHING SPRING BUSHING SPRING BUSHING CYL (3.5" X 2.00" X 12") CYL (4.0" X 2.25" X 12") CONNECTOR (08S-06O45) CONNECTOR (08S-06O90) CONNECTOR (08S-06O90) CONNECTOR (08S-06O90, ORF) HOSE (06OFX-30"-3000) HOSE (06OFX-40"-3000) CONTROL LEVER ATTACHMENT LEVER ATTACHMENT LEVER HANDLE (1/2-NC, GRN) CONNECTOR LINK CLEVIS PIN (1/4" X 11/16") COTTER PIN (1/16" X 3/4") HANDLE BRACKET

H550 H650/H750/H850 H550 H650/H750/H850 H550 H650/H750/H850 H550 H650/H750/H850

H550 H650/H750/H850 H750/H850 H650, OBSOLETE SEE FOOTNOTE 1 FLAT END

NOT SHOWN:

FOOTNOTES:

1-PART #331-299 (REF 8) IS USED WITH 362-844, 362-854, 116-562 & 362-845.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS CONNECTOR O-RINGS.

01

ID0140155

94

95

96

PLOW SWING HYDRAULICS

10 9 13 6 12 4

11 14

11

7 5

8

1 3 2

02

ID0140135

97

PLOW SWING HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

125-772 125-773 151-049 151-054 154-227 154-342 154-357 154-722 154-788 154-722 154-755 154-788 314-543 365-295 331-299 110-531 500-419 110-082 105-530 500-027

QTY

DESCRIPTION

1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1

FIBER BUSHING FIBER BUSHING CYLINDER (3.0" X 1.50" X 3") CYLINDER (3.0" X 1.50" X 4") CONNECTOR (08 S/06 O 90) CONNECTOR (06 S/06 O 90) CONNECTOR (08 S/06 O 90) HOSE (06OFX-32"-3000) HOSE (06OFX-40"-3000) HOSE (06OFX-32"-3000) HOSE (06OFX-34"-3000) HOSE (06OFX-40"-3000) CONTROL LEVER ATTACHMENT LEVER ATTACHMENT LEVER HANDLE (1/2-NC, BLK) CONNECTOR LINK CLEVIS PIN (1/4" X11/16") COTTER PIN (1/16" X 3/4") HANDLE BRACKET

REMARKS

H550/H750/H650 H530/H730/H650

ORIFICE H530/H550 H630/H650/H730/H750 H550 H530 H630/H650/H730/H750 H630/H650, OBSOLETE SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1-PART #331-299 (REF 9) IS USED WITH 362-844, 362-854, 116-562 & 362-845.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS CONNECTOR O-RINGS.

02

ID0140135

98

VIBRATOR DRIVE HYDRAULICS H730 (DOUBLE HYDRAULIC MOTOR)

15

FOOTNOTE 2

14 8

16

TO GROUND DRIVE MOTOR

24 14

17

18

8

25 6

15 1

ATTACHMENT DRIVE PUMP

7

9 4

2

27

4

5

11 5

26

A B

12

TEST PORT

12

19

2

3 13

9

10 1

23 21 13 21

7

10 20 22

01

ID0165814

99

VIBRATOR DRIVE HYDRAULICS H730 (DOUBLE HYDRAULIC MOTOR) REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

156-730 154-347 154-298 106-202 106-499 158-711 500-621 156-462 156-461 154-680 154-873 154-290 154-814 154-317 154-793 154-389 154-390 154-674 154-266 154-248 154-272 154-695 515-093 115-778 110-359 315-623 105-081 105-047 154-396 154-740 154-312 154-310

QTY

2 2 1 4 4 2 1 2 1 1 2 2 1 2 2 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1

DESCRIPTION

TUBE CONNECTOR BRANCH TEE (16O-16O-16S) CONNECTOR (10O-10OS90) FLG BLT (1/2-NC X 1-1/4") FLG BLT (1/2-NC X 1-1/2") HYDRAULIC MOTOR SEAL REPAIR KIT HYDRAULIC LINE HYDRAULIC LINE HOSE (08OFX-74"-3000) HOSE (08OFX90-106"-2000) ADAPTER UNION (16O90) HOSE (16OFX-10OFX90-98"-4000) RUN TEE (10O-10S) HOSE (16OFX-16OFX45-50"-4000) BK CONNECTOR (16OBK) BK CONNECTOR (08OBK) HOSE (08OFX-24"-3000) RUN TEE (08O) BUSHING STEM (04O) BUSHING NUT (08O) HOSE (04OFX-38"-3000) HOSE(04OFX-04O90S-42"-3000) ABRASION SLEEVE CLAMP CLAMP BAR BOLT (3/8-NC X 3-1/4") LOCKNUT (3/8-NC) BK CONNECTOR (08O90BK) HOSE(08OFX-08OFX90-26"-3000) REDUCER BUSHING (08O) BUSHING NUT (10O)

REMARKS

GD 8 GD 8 - SEE FOOTNOTE 3

SEE FOOTNOTE 1 SEE FOOTNOTE 2

SEE FOOTNOTE 4

SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1 - BEGINS WITH S/N 2J0534 2 - ENDS WITH S/N 2J0533 3 - LONGER BOLTS ARE NEEDED WITH .375 THK COVER PLATE. 4 - ENDS WITH S/N 5L0068

NOTE:

01

ID0165814

100

101

102

103

104

BLADE STEERING HYDRAULICS H630/H650/H730/H750 BEGINS WITH S/N 2J0534

18

17

21

20

7

1 2

19

19

22 4

13

10

5

6 8

16 13 14 10

3

9 14

11

16

3 10

12

12 10 15 10

01

ID0140149

105

BLADE STEERING HYDRAULICS H630/H650/H730/H750 BEGINS WITH S/N 2J0534 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

QTY

154-222 1 154-228 1 154-733 2 105-162 5 305-256 7 110-270 10 105-047 5 110-642 1 125-773 2 154-227 5 151-050 2 125-754 2 154-847 2 154-735 2 515-163 2 154-400 2 115-680 3 154-754 2 314-543 1 365-295 1 331-299 1 110-531 1 500-419 1 110-082 1 105-530 1 500-027 1

DESCRIPTION

CONNECTOR (06O-08S) UNION (06090) HOSE (06O-36"-3000) BOLT (3/8-NC X 2-1/4") BACKUP SPACER CLAMP (9/16") LOCKNUT (3/8-NC) CLAMP (.406 ID) COMPOSITION BUSHING CONNECTOR (06O-08S90) CYLINDER (3.5" X 1.750" X 5.000") COMPOSITION BUSHING HOSE (06O-78"-3000) HOSE (06O-70"-3000) HOSE (06O-88"-3000) BULKHEAD RUN TEE (06O) ABRASION SLEEVE HOSE (06O-30"-3000) VALVE CONTROL HANDLE VALVE CONTROL HANDLE VALVE CONTROL HANDLE HANDLE (1/2-NC, BLACK) CONNECTOR LINK CLEVIS PIN (1/4" X 11/16") COTTER PIN (1/16" X 3/4") LEVER BRACKET

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3

H730/H750 H630/H650 SEE FOOTNOTE 4

NOT SHOWN:

FOOTNOTES:

1-USE WITH H730.

2-USE WITH H750, H650.

3-USE WITH H630.

4-PART #331-299 (REF 17) IS USED WITH 362-844, 362-854, 116-562 & 362-845.

NOTE:

01

ID0140149

106

107

108

NOTES:

ID0134963

109

REEL CARRIER

110

111

112

REEL CARRIER FRAME RLCR75, RLCR65

6 18 5

8

20 7 14 17

1 2 5 5

16 12

13 5 6 4

9

3

13 19

4 11 10 15 9

02

ID0138292

113

REEL CARRIER FRAME RLCR75, RLCR65 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

QTY

105-065 2 105-076 2 105-197 2 105-085 4 105-088 10 105-121 6 105-347 4 105-348 4 105-714 4 105-818 2 110-567 AR 125-435 4 181-546 2 181-547 2 318-196 2 318-256 1 318-180 1 318-181 1 318-193 1 318-194 2

DESCRIPTION

LOCKNUT (1/2-NC) BOLT (1/2-NC X 3") BOLT (1/4-NC X 1") LOCKNUT (1/4-NC) WASHER BOLT (1/2-NC X 1") BOLT (7/8-NC X 7") NUT (7/8-NC) SETSCREW (3/8-NC X 1") BOLT (1/4-NC X 1-1/2") COIL CHAIN (3/16") COMPOSITION BUSHING BUSHING BUSHING TAPPERED PIN LIFT ARM LEFT MOUNTING BRACKET RIGHT MOUNTING BRACKET ARBOR SHAFT LOCK-UP ROD

REMARKS

USES 2 OF 14"

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0138292

114

REEL CARRIER HYDRAULICS

8

8 12

12

17 21

27

13 18

19

18 26

20

21

24

13 21

1

9 OUT

20

3

IN

10

10

2

14

7

15

6 25

5

4 23 28 11

22 16 28

01

16

TO DUMP VALVE INLET

TO STEERING MOTOR RETURN

ID0140469

115

REEL CARRIER HYDRAULICS REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

2 2 2 2 2 2 2 2 1 2 1 2 2 1 1 2 1 2 1 2 3 1 1 1 1 1 1 2

FLG LOCKNUT (5/16-NC) NUT (1/4-NC) LOCK WASHER (1/4) WASHER (1/4") BOLT (1/4-NC X 2") FLG LK BOLT (5/16-NC X 1/2") FLG LK BOLT (5/16-NC X 3/4") CYLINDER(2.0"X1.187"X12.187") CONNECTOR (06S-04O) CONNECTOR (06S-06O45) CONNECTOR (06O-06OFX90) CONNECTOR (045-04O90) ADAPTER UNION (04O-04OF90) CONNECTOR (08S-04O) CONNECTOR (08S-04O90) RUN TEE (06OFX-06O-06O) RUN TEE (04S-04O-04O) BRANCH TEE (04O) HOSE (04O-15"-3000) HOSE (04O-62"-3000) HOSE (04O-30"-3000) HOSE (06O-90"-3000) HOSE (06O-110"-3000) HYDRAULIC CONTROL VALVE RELIEF VALVE CONNECTOR(04O-06S-STR-ORF.046) BRANCH TEE(04O-04O-04S) PLUG (06O)

1 2 2 1 1 1 1 1 1

CLAMP RIVET DIODE HARNESS HARNESS ABRASION SLEEVE (1.39"OD X 30") ABRASION SLEEVE (1.59"OD X 30") ROCKER SWITCH MOUNT BEZEL

105-003 105-078 105-079 105-095 105-106 105-822 105-823 150-122 154-220 154-224 154-228 154-252 154-255 154-261 154-276 154-344 154-316 154-379 154-672 154-681 154-702 154-786 154-787 158-575 500-612 154-385 154-293 154-330

DESCRIPTION

REMARKS

SEE FOOTNOTE 1.

NOT SHOWN:

110-226 110-560 215-054 215-814 215-815 115-714 115-754 217-706 216-017 FOOTNOTES:

1. CAPS AND PLUGS WILL BE REMOVED WHEN SAW IS ATTACHED TO TRACTOR.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

01

ID0140469

116

NOTES:

ID0134963

117

H740 EARTH SAW

118

119

120

121

122

CUTTER WHEELS H740/H741

11 12 18

24

REPAIR TOOLS

26 17

20

3

12

11 19

8

3

21

8

23

2

33

5 13 10

25

28

32

1

27

3

9 4 15

22

14 6

7

22

4 15 16

30

6 29 31

31

K

801-635

123

CUTTER WHEELS

H740/H741 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

QTY

105-943 4 105-340 8 105-460 AR 106-361 13 105-357 4 105-478 13 106-057 8 106-085 60 115-001 1 125-616 1 136-105 AR 131-290 AR 136-222 AR 136-108 110-402 1 315-850 1 315-809 2 158-719 1 158-759 1 190-069 1 157-695 1 153-961 1 153-966 1 191-400 1 181-905 60 235-107 235-114 235-115 235-116 235-117 259-001 259-002 315-808 2 315-867 2 315-847 1 311-660 5 311-661 5 311-662 5 311-663 5 136-107 AR 311-659 10 311-735 10 195-611 40 305-390 10 305-391 10 305-392 10 105-399 1 105-427 1

NOT SHOWN: 302-634 302-633 105-961

1 2 8

DESCRIPTION

BOLT (5/8-NC X 2-3/4") FLG LOCK NUT (3/4-NC) WASHER (13/16") BOLT (7/8-NC X 4") LOCKNUT (5/8-NC) LOCKNUT (7/8-NC) BOLT (3/4-NC X 4") BOLT (3/4-NC X 3-1/4", G8) ZERK (02N) FLANGE BEARING (3.000") CAP BIT FLARED CAP BIT INSERT BIT RETAINER RING BEARING END CLOSURE WHEEL SHAFT PLATE BOLT PLATE HYDRAULIC MOTOR HYDRAULIC MOTOR SEAL REPAIR KIT FACE SEAL HYDRAULIC MOTOR HYDRAULIC MOTOR SEAL REPAIR KIT SPACER (FOR 6" SEG.) TOOTH BLOCK CLAMP-7/8" 4.5" SEG. #1 FIXTURE-7/8" 4.5" SEG. #2 FIXTURE-7/8" 6.0" SEG. #3 FIXTURE-7/8" 6.0" SEG. #4 FIXTURE-7/8" BIT PULLER - HAMMER BIT PULLER - SLIDE HAMMER CUTTER WHEEL H740 WEARBAR WHEEL H740 WHEEL SHAFT 4-1/2" EARTH SAW SEGMENT 4-1/2" EARTH SAW SEGMENT 6" EARTH SAW SEGMENT 6" EARTH SAW SEGMENT BIT BLOCK WEAR BAR WEAR BAR BOLT (1/2-NC X 1-1/4", CSK, SOC) BACK-UP BAR WEAR BAR WEAR BAR WASHER (3/4") BOLT (3/4-NF X 1")

03" CUTTER WHEEL WHEEL SHAFT PLATE BOLT (3/4-NC X 2")

REMARKS

(60) 6" SEG. & (120) 4-1/2" SEG. SEE FOOTNOTE 1

OBSOLETE (70) 6" SEG. & (60) 4-1/2" SEG.

OBSOLETE H740 OBSOLETE H741 USED WITH H740. SEE FOOTNOTE 2.

USED WITH H741. SEE FOOTNOTE 3.

FOR POCLAIN MOTORS

HAS HOLES FOR MOUNTING WEAR BARS (ITEM #31)

RECTANGULAR STYLE BEVELED EDGE STYLE

OPTIONAL

FOOTNOTES

1. BOLT, 106-361 (REF #4): QTY=13 W/SPLIT WHEEL; QTY=5 W/SOLID WHEEL. 2. POCLAIN HYDRAULIC MOTOR. THIS WILL SUPERSEDE 158-719.

3. POCLAIN HYDRAULIC MOTOR. THIS WILL SUPERSEDE 158-759.

K

801-635

124

125

126

127

128

129

130

131

132

133

134

SAW LIFT HYDRAULICS H740/H741

TO SUPPLY

20

7

TO RETURN

RE TU

PR ES SU

TO SAW MOTOR

RE

11

RN

13

12

17

1

14 19 5

10

1

3 18 9

11 6 4

8 2

16

2 15

01

9

ID0140413

135

SAW LIFT HYDRAULICS H740/H741 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

154-227 157-038 155-706 154-228 157-038 154-342 157-038 155-705 154-346 157-038 155-705 154-357 157-038 155-706 154-788 275-196 154-826 151-029 158-593 158-594 154-722 154-256 157-039 154-262 157-038 154-299 157-039 155-706 125-772 125-773 275-195 105-170 105-003 154-330

QTY

2 2 2 2 1 1 1 2 2 1 1 3 1 1 1 2 2 1 3 3 2

DESCRIPTION

REMARKS

CONNECTOR O-RING (012 D90) O-RING (908 D90) CONNECTOR O-RING (012 D90) CONNECTOR O-RING (012 D90) O-RING (906 D90) TEE O-RING (012 D90) O-RING (906 D90) CONNECTOR (.046 ORIFICE) O-RING (012 D90) O-RING (908 D90) HOSE (40" 3000 PSI) PRESSURE DECAL HOSE (060FX-12"-3000) CYL (3.0" X 1.50" X 10") HYD CONTROL VALVE (3 SPOOL) HYD CONTROL VALVE (2 SPOOL) HOSE (32" 3000 PSI) SWIVEL ELBOW O-RING (014 D90) REDUCER O-RING (012 D90) RUN TEE O-RING (014 D90) O-RING (908 D90) FIBER BUSHING FIBER BUSHING RETURN DECAL BOLT (5/16 -NC X 3") FLG LOCKNUT (5/16 -NC) PLUG (06O)

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. CAPS AND PLUGS WILL BE REMOVED WHEN SAW IS ATTACHED TO TRACTOR.

NOTE:

01

ID0140413

136

137

138

139

140

NOTES:

ID0134963

141

BOOMS DIGGING CHAINS AUGER PARTS RESTRAINT BARS TRENCH CLEANERS ID0134855

142

BOOM TUBE

5 2

1

4

3,6

04

ID0093140

143

BOOM TUBE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

QTY

100-736 100-737 105-065 AR 105-110 AR 140-1128 1 140-1129 1 140-1130 1 140-1131 1 143-023 1 143-024 1 143-025 1 143-026 1 143-035 1 143-036 AR 140-1176 1 140-1177 1 140-1178 1 140-1179 1

DESCRIPTION

SHORT TOP BAR KIT LONG TOP BAR KIT LOCKNUT (1/2-NC) BOLT (1/2-NC X 4-1/2") BOOM TUBE (51") BOOM TUBE (63.3") BOOM TUBE (75.5") BOOM TUBE (101.1") BOOM TUBE (52") BOOM TUBE (64.3") BOOM TUBE (76.5") BOOM TUBE (101.1") TOP WEAR BAR (SHORT) TOP WEAR BAR (LONG) HD BOOM TUBE (51") HD BOOM TUBE (63.3") HD BOOM TUBE (75.5") HD BOOM TUBE (101.1")

REMARKS

INCL REF NO.'S 1,2 & 4 INCL REF NO.'S 1,2 & 5 (4) PER 11.1" WEAR BAR,(6) PER 23.4" WEAR BAR (4) PER 11.1" WEAR BAR,(6) PER 23.4" WEAR BAR SEE FOOTNOTE 3, 62P/3P OR 96P/2P CHAINS SEE FOOTNOTE 3, 70P/3P OR 108P/2P CHAINS SEE FOOTNOTE 3, 78P/3P OR 120P/2P CHAINS SEE FOOTNOTE 3, 94P/3P OR 144P/2P CHAINS SEE FOOTNOTE 4, 62P/3P OR 96P/2P CHAINS SEE FOOTNOTE 4, 70P/3P OR 108P/2P CHAINS SEE FOOTNOTE 4, 78P/3P OR 120P/2P CHAINS SEE FOOTNOTE 4, 94P/3P OR 144P/2P CHAINS SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3, 62P/3P OR 96P/2P CHAINS SEE FOOTNOTE 3, 70P/3P OR 108P/2P CHAINS SEE FOOTNOTE 3, 78P/3P OR 120P/2P CHAINS SEE FOOTNOTE 3, 94P/3P OR 144P/2P CHAINS

NOT SHOWN:

FOOTNOTES:

1. FOR 70P/3P OR 108P/2P NON-WEAR BAR BOOM ARRANGEMENTS. 2. ONE (1) FOR 78P/3P OR 120P/2P NON-WEAR BAR BOOM ARRANGEMENTS, TWO (2) FOR 94P/3P OR 144/2P NON-WEAR BAR BOOM ARRANGEMENTS. 3. FOR PIVOTS WITH 5" ALIGNMENT PIN HOLE CENTERS, OR MODIFIED 8.5" PIN HOLE CENTER PIVOTS. 4. FOR PIVOTS WITH 8.5" ALIGNMENT PIN HOLE CENTERS.

NOTE:

04

ID0093140

144

145

146

147

148

SMALL TAIL SPROCKET BOOM

4

2 6 5 3 1

01

ID0139704

149

SMALL TAIL SPROCKET BOOM REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

140-543 140-544 105-319 105-340 105-473 143-043 184-089 184-090

QTY

1 5 5 1 5 5

DESCRIPTION

BOOM (2P) BOOM (3P) BOLT (3/4-NC X 1-1/2") FLG LOCKNUT (3/4-NC) BOLT (3/4-NC X 5") BOOM WASHER (.781") BOOM CROSS TUBE

REMARKS

INCL REF NO.'S 1 THRU 6; SEE FOOTNOTE 1 INCL REF NO.'S 1 THRU 6; SEE FOOTNOTE 1 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. BOOM ALSO CONTAINS APPROPRIATE SPROCKET AND HARDWARE; REFER TO PAGE TITLED "SPROCKET, 2" AND 3" PITCH". THIS BOOM MAY BE USED WITH A VARIETY OF CHAIN LENGTHS BY USING OPTIONAL BOOM TUBES; REFER TO PAGE TITLED "BOOM TUBE" 2. BOLT IS USED WITH BOTTOM TUBES DESIGNED FOR 3.067" PITCH CHAINS 70 PITCH AND LONGER. THE BOLT SCREWS INTO THE BOTTOM SURFACE OF THE BOOM TUBE AND ACTS AS A CYLINDER STOP AND BOOM MAIN FRAME SAFETY LUG.

NOTE:

01

ID0139704

150

151

152

153

154

HD ROLLER 19"

2 3

8

10

7 6 5 9

4 4

7

6 FACTORY MATCHED BEARING ASSEMBLY (SEE FOOTNOTE 1)

SPACER

BEARING 8

9 11

10

1 11

1

7 10

RACE

06

6 9

SNAP RINGS

ID0113864

155

HD ROLLER 19" REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

1 1 1 1 1 2 2 1 2 2 1

141-626 115-003 115-152 125-546 129-013 157-308 141-629 141-625 141-627 157-309 107-920

DESCRIPTION

TAIL SHAFT NUT ZERK (1/4-NF, STR) PLUG (12N, SQ FM) BEARING ASSEMBLY LT ROLLER (3.067"P, 19.0") EXTERNAL SEAL (3.875") SEAL SLEEVE BOOM TAIL SHAFT SEAL SPACER V-RING SEAL BOLT (5/16-NC X 3/8 ", SOC)

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 4

NOT SHOWN:

FOOTNOTES:

1. REF. NO. 4 (BEARING ASSEMBLY) IS FACTORY MATCHED, DO NOT MIX CUPS, SONES, SPACERS, ETC. ASS'Y INCLUDES: 2X INT. SNAP RING, 2X TAP RACE, 2X TAP BEARING & BEARING SPACER 2. CHECK SURFACE OF SEAL BEFORE INSERTING SO PROPER SIDE FACES OUTSIDE 3. WIDER SIDE OF SEAL MUST BE INSTALLED FACING INSIDE 4. AFTER SETTING THE PRE-LOAD OF THE BEARING, REF. #11 (107-920) SHOULD FIT IN ONE OF THREE HOLES IN THE BOOM SIDE PLATE TO KEEP THE TAILSHAFT NUT FROM LOOSENING. NOTE:

06

ID0113864

156

157

158

159

160

ROLLER (19" OD)

1

2 13 8

3 5 9

10

7

11

4 5

6 4

11 9 12

6 8 13

06

ID0129294

161

ROLLER (19" OD) REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

190-183 105-377 115-001 115-003 115-152 115-470 125-216 125-265 142-757 145-589 155-852 181-697 181-699 166-437 184-067

QTY

1 1 1 1 2 2 2 1 2 2 1 2 1 2

DESCRIPTION

REMARKS

BEARING/SEAL REPAIR KIT JAM NUT (1-1/2-NF) ZERK (02N) ZERK (1/4-NF, STR) PLUG (12N, SQ FM) INTERNAL SNAP RING (3.250") TAPERED RACE (3.265") TAPERED BEARING (1.5") LT ROLLER (3.067"P, 19") SPACER EXTERNAL SEAL (2.250") BEARING SPACER SEAL SLEEVE TAIL SHAFT SEAL SPACER

INCL REF NO.'S 4-6, 8-11 & 13 NON-SELF TAPPING SELF TAPPING

INCL REF NO.'S 2 & 3 ENDS WITH S/N

NOT SHOWN:

FOOTNOTES:

NOTE:

06

ID0129294

162

163

164

DIG CHAIN 2P50K2PS RR

5 10 9 7

12

8

11

2 4

13 3

14 1

6

16 15

05

ID0093102

165

DIG CHAIN 2P50K2PS RR REF PART NO. NUMBER

QTY

DESCRIPTION

1. 105-043 AR BOLT (1/2-NC X 1-1/4") 105-066 AR BOLT (1/2-NC X 1-3/4") 105-136 AR BOLT (1/2-NC X 3-1/2", GD8) 105-111 AR BOLT (1/2-NC X 4") 2. 105-065 AR LOCKNUT (1/2-NC) 3. 135-351 AR DIG CHAIN PIN (50K) 4. 135-358 AR LOCK KEY (3/32" X 1/2") 5. 135-952 AR CHAIN SPACER 6. 135-964 AR TOOTH SPACER (1/4") 7. 136-135 AR LEFT DIGGING TOOTH-CUP 135-1233 AR DURATOOTH, LEFT 1/4 50K 135-1234 AR DURATOOTH C2X, LEFT 1/4 50K 8. 136-136 AR RIGHT DIGGING TOOTH-CUP 135-1236 AR DURATOOTH, RIGHT 1/4 50K 135-1237 AR DURATOOTH C2X, RIGHT 1/4 50K 9. 136-137 AR L.H. 2.000 VEE 10. 136-138 AR R.H. 2.000 VEE 11. 138-203 AR ROLLER LINK (50K) 12. 138-215 AR 12' DIG CHAIN (2 P) 138-216 AR 4' DIG CHAIN (4 P) 138-217 AR 2' DIG CHAIN (2 P) 138-218 AR 11'4" CHAIN (68 P) 138-219 AR 2'8" DIG CHAIN (6 P) 13. 138-352 AR TOOTH SIDEBAR 138-370 AR MASTER LINK KIT-TOOTH(50K) 14. 138-353 AR TOOTH SIDEBAR-HEAD (50K) 138-370 AR MASTER LINK KIT-TOOTH (50K) 15. 136-031 AR CHAIN SPACER (.650") 16. 136-032 AR CHAIN SPACER (1.200")

REMARKS

OBSOLETE

OBSOLETE

OBSOLETE OBSOLETE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH KEY SIDE INCL REF NO'S 3,4,13, AND 14 HEAD SIDE INCL REF NO'S 3,4,13, AND 14

NOT SHOWN: 259-140 CHAIN JAWS (1-1/8" DRIVE)

NOT SHOWN:

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE (050-700). REFER TO BOOM, CHAIN AND CLEANER OPTIONS (052-190) FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

NOTE:

05

ID0093102

166

167

168

DIGGING CHAIN 3.067" P - 70,000 LB

8 10 7

6

9

4 5

15

12

1 13 3 14

11

2 6

04

ID0093092

169

DIGGING CHAIN 3.067" P - 70,000 LB REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

QTY

DESCRIPTION

105-372 AR LOCKNUT (3/4-NC) 105-499 AR BOLT (3/4-NC X 1-3/4") 105-466 AR BOLT (3/4-NC X 2-1/2") 105-339 AR BOLT (3/4-NC X 2-3/4") 105-321 AR BOLT (3/4-NC X 3") 105-365 AR BOLT (3/4-NC X 4") 106-086 AR BOLT (3/4-NC X 4-1/4") 105-383 AR BOLT (3/4-NC X 6") 135-402 AR LOCK KEY (5/16" X 3/4") 135-910 AR LEFT CUP TOOTH 135-1239 AR DURATOOTH, LEFT 3/8 70-110K 135-1240 AR DURATOOTH C2X, LEFT 3/8 70-110K 135-911 AR RIGHT CUP TOOTH 135-1242 AR DURATOOTH, RIGHT 3/8 70-110K 135-1243 AR DURATOOTH C2X, RIGHT 3/8 70-110K 135-921 AR TOOTH SPACER (3/8") 136-070 AR TOOTH SPACER (1/2") 135-960 AR SPACER (1/8") 135-961 AR CHAIN SPACER (.8") 135-962 AR CHAIN SPACER (1.9") 135-979 AR CHAIN SPACER (2.16") 136-109 AR LEFT TOUGH TOOTH 90 136-110 AR RIGHT TOUGH TOOTH 90 136-120 AR TOOTH ADAPTER 136-071 AR TOOTH ADAPTER 137-501 AR DIG CHAIN PIN (70K) 138-503 AR ROLLER LINK 138-504 AR TOOTH SIDEBAR 138-505 AR TOOTH SIDEBAR 138-701 AR 2'-2" CHAIN (8 P) 138-702 AR 4'-2" CHAIN (16 P) 138-703 AR 13'-3" CHAIN (52 P) 138-707 AR 14'-4" CHAIN (56 P) 138-704 AR 15'-10" CHAIN (62 P)

REMARKS

OBSOLETE OBSOLETE

OBSOLETE OBSOLETE FOR 10" & 12" WIDTHS. NOT SHOWN KEY SIDE HEAD SIDE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH

NOT SHOWN:

259-140

CHAIN JAWS

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

04

ID0093092

170

DIGGING CHAIN 3.067" P - 70,000 LB 4 PITCH SPACING - RAISED RIVET

8

5

10 1 7 6 9

6

4 2

13

15

14

3 12 11

06

ID0129159

171

DIGGING CHAIN 3.067" P - 70,000 LB 4 PITCH SPACING - RAISED RIVET REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

QTY

105-372 AR 105-499 AR 105-466 AR 105-339 AR 105-321 AR 105-365 AR 105-383 AR 135-402 AR 135-910 AR 135-1239 AR 135-1240 AR 135-911 AR 135-1242 AR 135-1243 AR 135-921 AR 136-070 AR 135-960 AR 135-961 AR 135-962 AR 136-109 AR 136-110 AR 136-120 AR 137-501 AR 135-1182 AR 138-506 AR 138-507 AR 138-509 AR 138-510 AR 138-511 AR 138-512 AR 138-706 AR

DESCRIPTION

LOCKNUT (3/4-NC) BOLT (3/4-NC X 1-3/4") BOLT (3/4-NC X 2-1/2") BOLT (3/4-NC X 2-3/4") BOLT (3/4-NC X 3") BOLT (3/4-NC X 4") BOLT (3/4-NC X 6") LOCK KEY (5/16" X 3/4") LEFT CUP TOOTH DURATOOTH LEFT 3/8" 70-110K DURATOOTH C2X LEFT 3/8" 70-110K RIGHT CUP TOOTH DURATOOTH RIGHT 3/8" 70-110K DURATOOTH C2X RIGHT 3/8" 70-110K SPACER (3/8") SPACER (1/2") SHIM (1/8") CHAIN SPACER (.80") CHAIN SPACER (1.90") LEFT TOUGH TOOTH 90 RIGHT TOUGH TOOTH 90 TOOTH ADAPTER (7.65") DIG CHAIN PIN (70K) 70K STD REPAIR STATION KIT PLAIN SIDEBAR PLAIN SIDEBAR 2'-1" CHAIN (8 P) 4'-1" CHAIN (16 P) 15'-10" CHAIN (62 P) 13'-3" CHAIN (52 P) 14'-4" CHAIN (56 P)

REMARKS

OBSOLETE

OBSOLETE

OBSOLETE OBSOLETE

OBSOLETE, KEY SIDE OBSOLETE, HEAD SIDE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH

NOT SHOWN:

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM,CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

06

ID0129159

172

173

174

PRM CHAIN ALGTR 3P70K2PS RR PR 2 PITCH SPACING-BOLT ON-RAISED RIVET 8 6 10

13 11

3

9

3

13 1

5

13

4

3 5

7 4 5

5 12

12 14

2 3 14

5

11

3 16

2

5

15

02

ID0093161

175

PRM CHAIN ALGTR 3P70K2PS RR PR 2 PITCH SPACING-BOLT ON-RAISED RIVET REF PART NO. NUMBER

QTY

DESCRIPTION

1. 105-322 AR BOLT (3/4-NC X 5-1/2") 2. 105-365 AR BOLT (3/4-NC X 4") 3. 105-372 AR LOCKNUT (3/4-NC) 4. 105-391 AR BOLT (3/4-NC X 4-1/2") 5. 135-1187 AR 70K PREMIUM REPAIR STATION KIT 6. 136-008 AR RETAINER RING 7. 139-701 AR 2'-1" CHAIN (8 P) 139-702 AR 4'-1" CHAIN (16 P) 139-707 AR 14'-6" CHAIN (56 P) 139-704 AR 16'-1" CHAIN (62 P) 8. 136-100 AR BIT (CARBIDE CAP) 136-101 AR BIT (CARBIDE INSERT) 136-102 AR HEAVY DUTY BIT (CARBIDE INSERT) 9. 135-973 AR BIT ADAPTER 10. 135-974 AR BIT ADAPTER 11. 135-975 AR BIT ADAPTER 12. 135-976 AR BIT ADAPTER 13. 135-979 AR CHAIN SPACER (2.156") 14. 135-980 AR CHAIN SPACER (1.405") 15. 137-501 AR DIG CHAIN PIN (70K) 16. 135-402 AR LOCK KEY (5/16" X 3/4")

REMARKS

USE WITH TWO (2) ADAPTERS ON OUTSIDE USE WITH ADAPTER ON INSIDE

LESS ADAPTERS LESS ADAPTERS LESS ADAPTERS LESS ADAPTERS INCL REF NO 17 INCL REF NO 17 INCL REF NO 17 LEFT OUTSIDE RIGHT OUTSIDE LEFT INSIDE AND RIGHT OUTSIDE RIGHT INSIDE AND LEFT OUTSIDE USED WITH ONE OR TWO ADAPTERS ON OUTSIDE USED WITH ONE ADAPTER INSIDE

NOT SHOWN:

259-001 259-002 259-150 259-140 135-957

BIT PULLER - HAMMER BIT PULLER - SLIDE HAMMER BIT PUNCH - SLIDE HAMMER CHAIN JAWS (1-1/8" DRIVE) BIT BLOCK

FOR REF NO.'S 9-12

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

02

ID0093161

176

DIGGING CHAIN 3.067" P - 110,000 LB 2 PITCH SPACING - RAISED RIVET

6 8 10

9 6 7 7

5 14

2 6

12 13 3 1

13

11 4

03

ID0093160

177

DIGGING CHAIN 3.067" P - 110,000 LB 2 PITCH SPACING - RAISED RIVET REF PART NO. NUMBER

QTY

DESCRIPTION

1. 105-372 AR LOCKNUT (3/4-NC) 2. 105-499 AR BOLT (3/4-NC X 1-3/4") 105-466 AR BOLT (3/4-NC X 2-1/2") 105-339 AR BOLT (3/4-NC X 2-3/4", GD8) 105-321 AR BOLT (3/4-NC X 3") 105-365 AR BOLT (3/4-NC X 4") 105-383 AR BOLT (3/4-NC X 6", GD8) 3. 135-402 AR LOCK KEY (5/16" X 3/4") 4. 135-910 AR LEFT DIGGING TOOTH 135-1239 AR DURATOOTH, LEFT 3/8" 70-11K 135-1240 AR DURATOOTH C2X, LEFT 3/8" 70-11K 5. 135-911 AR RIGHT DIGGING TOOTH 135-1242 AR DURATOOTH, RIGHT 3/8" 70-11K 135-1243 AR DURATOOTH C2X, RIGHT 3/8" 70-11K 6. 135-921 AR TOOTH SPACER (3/8") 136-070 AR SPACER (1/2") 7. 135-961 AR CHAIN SPACER (.8") 135-962 AR CHAIN SPACER (1.9") 135-977 AR CHAIN SPACER (2.34") 8. 136-109 AR L.H. 3.067 VEE 9. 136-110 AR R.H. 3.067 VEE 10. 136-120 AR 12" TOOTH ADAPTER 136-121 AR 15" TOOTH ADAPTER 136-122 AR 18" TOOTH ADAPTER 136-123 AR 21" TOOTH ADAPTER 136-124 AR 24" TOOTH ADAPTER 11. 137-401 AR DIG CHAIN PIN (110K) 12. 138-404 AR ROLLER LINK (110K) 13. 138-406 AR TOOTH SIDEBAR (110K) 138-407 AR TOOTH SIDEBAR (110K) 14. 138-410 AR DIG CHAIN - 2P (4'1") 138-411 AR DIG CHAIN - 2P (15' 10") 138-412 AR DIG CHAIN - 2P (2' 1")

REMARKS

CUP - OBSOLETE

CUP - OBSOLETE

OBSOLETE OBSOLETE

KEY SIDE HEAD SIDE LESS TEETH LESS TEETH LESS TEETH

NOT SHOWN:

259-140

CHAIN JAWS (1-1/8" DRIVE)

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

03

ID0093160

178

PREMIUM DIGGING CHAIN 3.110" - 70.000 LB 2 PITCH SPACING - RAISED RIVET

8 10 7

6

9

4 5

13

1 12 3

2 11 6

02

ID0140806

179

PREMIUM DIGGING CHAIN 3.110" - 70.000 LB 2 PITCH SPACING - RAISED RIVET REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

QTY

DESCRIPTION

105-372 AR LOCKNUT (3/4-NC) 105-499 AR BOLT (3/4-NC X 1-3/4") 105-466 AR BOLT (3/4-NC X 2-1/2") 105-339 AR BOLT (3/4-NC X 2-3/4") 105-321 AR BOLT (3/4-NC X 3") 105-365 AR BOLT (3/4-NC X 4") 106-086 AR BOLT (3/4-NC X 4-1/4") 105-383 AR BOLT (3/4-NC X 6") 135-402 AR LOCK KEY (5/16" X 3/4") 135-910 AR LEFT CUP TOOTH 135-911 AR RIGHT CUP TOOTH 135-921 AR TOOTH SPACER (3/8") 136-070 AR TOOTH SPACER (1/2") 135-960 AR SPACER (1/8") 135-961 AR CHAIN SPACER (.8") 135-962 AR CHAIN SPACER (1.9") 135-979 AR CHAIN SPACER (2.16") 136-109 AR LEFT TOUGH TOOTH 90 136-110 AR RIGHT TOUGH TOOTH 90 136-120 AR 7.65" TOOTH ADAPTER 136-071 AR TOOTH ADAPTER 137-501 AR DIG CHAIN PIN (70K) 135-1187 AR 70K PREMIUM REPAIR STATION KIT 139-701 AR 2'-2" PREM CHAIN (8 P) 139-702 AR 4'-2" PREM CHAIN (16 P) 139-703 AR 13'-3" PREM CHAIN (52 P) 139-707 AR 14'-6" PREM CHAIN (56 P) 139-704 AR 16'-1" PREM CHAIN (62 P)

REMARKS

FOR 10" & 12" WIDTHS. NOT SHOWN

LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH

NOT SHOWN:

259-140

CHAIN JAWS (1-1/8" DRIVE)

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO CHAIN GUIDE 050-400. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

02

ID0140806

180

PREMIUM DIGGING CHAIN 3.11" P - 110,000 LB 2 PITCH SPACING - RAISED RIVET

10 8 2

6

11 1

6

9

2 5 15

13 6 4 6

7

14

1

3

7 14

01

12

ID0140950

181

PREMIUM DIGGING CHAIN 3.11" P - 110,000 LB 2 PITCH SPACING - RAISED RIVET REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

QTY

105-372 AR 105-499 AR 105-466 AR 105-339 AR 105-321 AR 105-365 AR 105-383 AR 135-402 AR 135-910 AR 135-911 AR 135-921 AR 136-070 AR 135-961 AR 135-962 AR 135-977 AR 136-071 AR 136-088 AR 136-089 AR 136-090 AR 136-109 AR 136-110 AR 137-401 AR 137-404 AR 137-406 AR 137-407 AR 139-412 AR 139-410 AR 139-411 AR

DESCRIPTION

LOCKNUT (3/4-NC) BOLT (3/4-NC X 1-3/4") BOLT (3/4-NC X 2-1/2") BOLT (3/4-NC X 2-3/4") BOLT (3/4-NC X 3") BOLT (3/4-NC X 4") BOLT (3/4-NC X 6") LOCK KEY (5/16" X 3/4") LEFT CUP TOOTH RIGHT CUP TOOTH TOOTH SPACER (3/8") TOOTH SPACER (1/2") CHAIN SPACER (.8") CHAIN SPACER (1.9") CHAIN SPACER (2.34") TOOTH ADAPTER TOOTH ADAPTER TOOTH ADAPTER TOOTH ADAPTER LEFT TOUGH TOOTH 90 RIGHT TOUGH TOOTH 90 DIG CHAIN PIN (110K) ROLLER LINK TOOTH SIDEBAR TOOTH SIDEBAR 2'-1" CHAIN (8 P) 4'-1" CHAIN (16 P) 15'-10" CHAIN (62 P)

REMARKS

FOR 11-1/2" WIDTH FOR 15-1/8" WIDTH FOR 18-1/8" & 21-1/8" WIDTHS FOR 23-5/8" WIDTH

KEY SIDE HEAD SIDE LESS TEETH LESS TEETH LESS TEETH

NOT SHOWN:

259-140

CHAIN JAWS (1-1/8" DRIVE)

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

01

ID0140950

182

ALLIGATOR CHAIN 3.067" P - 110,000 LB 17 10 6

8

13

11

3

9 13 5

3

6

13

1

6 6

4

3

13

13 6

6

13

6

4

7

6 12

12

14 2 16 3

6 14 11

14

6

15

6 3 2

14

6

02

ID0139813

183

ALLIGATOR CHAIN 3.067" P - 110,000 LB REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

QTY

105-322 AR 105-365 AR 105-372 AR 105-473 AR 138-404 AR 138-406 AR 138-407 AR 138-412 AR 138-410 AR 138-411 AR 136-100 AR 136-101 AR 136-102 AR 135-973 AR 135-974 AR 135-975 AR 135-976 AR 135-977 AR 135-978 AR 137-401 AR 135-402 AR 136-008 AR

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

DESCRIPTION

BOLT (3/4-NC X 5-1/2") BOLT (3/4-NC X 4") LOCKNUT (3/4-NC) BOLT (3/4-NC X 5",GD 8) ROLLER LINK (110K) TOOTH SIDEBAR (110K) TOOTH SIDEBAR (110K) DIG CHAIN - 2P (2' 1") DIG CHAIN - 2P (4' 1") DIG CHAIN - 2P (15' 10") CAP BIT INSERT BIT INSERT BIT BIT ADAPTER E.S. BIT ADAPTER BIT ADAPTER E.S. BIT ADAPTER CHAIN (2.343") CHAIN SPACER (1.593") DIG CHAIN PIN (110K) LOCK KEY (5/16" X 3/4") RETAINING RING

REMARKS

USE WITH (2) ADAPTERS ON OUTSIDE USE WITH ADAPTER ON INSIDE

KEY SIDE HEAD SIDE LESS ADAPTERS LESS ADAPTERS LESS ADAPTERS INCL. REF. NO. 17 (CARBIDE CAP) INCL. REF. NO. 17 (CARBIDE INSERT) INCL. REF. NO. 17 HEAVY DUTY (CARBIDE INSERT) LEFT OUTSIDE RIGHT OUTSIDE LEFT INSIDE AND RIGHT OUTSIDE RIGHT INSIDE AND LEFT OUTSIDE USED WITH ONE OR TWO ADAPTERS ON OUTSIDE USED WITH ONE ADAPTER INSIDE

NOT SHOWN:

259-001 259-002 259-140 259-150 135-957

BIT PULLER - HAMMER BIT PULLER -SLIDE HAMMER CHAIN JAWS (1-1/8" DRIVE) BIT PUNCH - SLIDE HAMMER BIT BLOCK

FOR REF. NO.'S 9-12

FOOTNOTES:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS. 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

NOTE:

02

ID0139813

184

185

186

ALLIGATOR CHAIN 3P 110K 2PS

2 PITCH SPACING-WELD ON-RAISED RIVET

2 13

1 11

14

12 10

3

5 4 11 9

15 8

7

6

03

ID0129246

187

ALLIGATOR CHAIN 3P 110K 2PS

2 PITCH SPACING-WELD ON-RAISED RIVET REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

QTY

135-402 AR 138-491 AR 136-105 AR 131-290 AR 136-106 AR 136-222 AR 136-107 136-108 AR 136-140 AR 136-141 AR 136-142 AR 136-143 AR 136-144 AR 136-145 AR 136-146 AR 136-147 AR 136-148 AR 136-149 AR 136-150 AR 137-401 AR 138-492 138-493 138-494 AR 138-495 AR 138-498 AR

DESCRIPTION

LOCK KEY (5/16" X 3/4") ROLLER LINK (110K) CAP BIT (4.5", 6", 9.5" SEG) FLARED CAP BIT INSERT BIT INSERT BIT BIT BLOCK RETAINER RING NO.1 TOP PLATE ASSEMBLY NO.2 TOP PLATE ASSEMBLY (RH) NO.2 TOP PLATE ASSEMBLY (LH) NO.3 TOP PLATE ASSEMBLY (RH) NO.3 TOP PLATE ASSEMBLY (LH) NO.4 TOP PLATE ASSEMBLY (RH) NO.4 TOP PLATE ASSEMBLY (LH) BLOCK PLATE ASSEMBLY (RH) NO.5 TOP PLATE ASSEMBLY (LH) NO.6 TOP PLATE ASSEMBLY (D) NO.7 TOP PLATE ASSEMBLY (D) DIG CHAIN PIN (110K) WELD-ON SIDEBAR-KEY (110K) WELD-ON SIDEBAR-HEAD (110K) DIG CHAIN WELD-ON-2P (1' 6") DIG CHAIN WELD-ON-2P (2' 1") DIG CHAIN WELD-ON-2P (14' 4")

REMARKS

OBSOLETE, INCL REF NO 5 (CARBIDE CAP) OBSOLETE, INCL REF NO 5 (HEAVY DUTY CARBIDE INSERT)

OBSOLETE, KEYSIDE, SLOTTED HOLES OBSOLETE, HEAD SIDE, ROUND HOLES LESS BITS LESS BITS LESS BITS

NOT SHOWN:

259-001 259-002 259-140 259-150

BIT PULLER - HAMMER BIT PULLER - SLIDE HAMMER CHAIN JAWS (1-1/8" DRIVE) BIT PUNCH - SLIDE HAMMER

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

03

ID0129246

188

189

190

PERSONNEL RESTRAINT

8

1 4

2

6

8

5 3

7 1 02

ID0139703

191

PERSONNEL RESTRAINT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

QTY

DESCRIPTION

100-735 BOOM FIT-UP KIT 105-340 10 FLG LOCKNUT (3/4-NC) 105-473 8 BOLT (3/4-NC X 5") 105-499 4 BOLT (3/4-NC X 1-3/4") 141-1218 1 RESTRAINT BAR-62P COMBO 141-1219 1 RESTRAINT BAR-70P COMBO 141-1220 1 RESTRAINT BAR-78P COMBO 141-264 1 PERSONNEL RESTRAINT BAR (52") 141-265 1 PERSONNEL RESTRAINT BAR (64.3") 141-266 1 PERSONNEL RESTRAINT BAR (76.55") 141-267 1 PERSONNEL RESTRAINT BAR (101.1") 143-009 1 LEFT AUGER BRACKET (12") 143-011 1 LEFT AUGER BRACKET (24") 143-010 1 RIGHT AUGER BRACKET (12") 143-012 1 RIGHT AUGER BRACKET (24") 143-022 1 ROCK GUARD 105-953 2 LOCKNUT (3/4-NC)

REMARKS

INCL. REF. NO.'S 1-3, 7 & 8

FOR 62P/3P OR 96P/2P CHAINS - H752/H952 & H1052 FOR 70P/3P OR 96P/2P CHAINS - H752/H952 & H1052 FOR 78P/3P OR 120P/2P CHAINS - H752/H952 & H1052 FOR 62P/3P OR 96P/2P CHAINS FOR 70P/3P OR 96P/2P CHAINS FOR 78P/3P OR 120P/2P CHAINS FOR 94P/3P OR 144P/2P CHAINS

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0139703

192

193

194

HYDRAULIC TRENCH CLEANER FOR ROLLER AND LARGE TAIL SPROCKET BOOMS

6 7

19

1

10

14 25

22

14 20

25

8

12 15

10

24

16

5

1

6 7

6 7 1 6

21

1 23 7

1

13 1

2

5

4

9 3 17 11 18

01

ID0140325

195

HYDRAULIC TRENCH CLEANER FOR ROLLER AND LARGE TAIL SPROCKET BOOMS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

QTY

100-181 105-089 16 105-090 2 141-336 1 105-137 2 105-160 12 105-190 4 183-758 4 105-502 2 141-335 1 115-484 4 105-110 2 116-313 1 116-314 1 116-394 2 140-951 2 141-245 3 141-333 1 141-294 1 105-065 2 141-331 1 141-293 2 141-296 1 141-297 1 141-298 1 141-299 1 141-300 1 141-301 1 141-305 1 141-302 1 141-310 1 141-312 1 141-313 1 180-532 1 185-890 1 183-055 2

DESCRIPTION

HYD CLEANER CONVERSION KIT LOCKNUT (5/16-NC) BOLT (5/16-NC X 3/4") CLAMP BAR CLIP NUT (5/16-NC) BOLT (5/16-NC X 1-1/4") BOLT (5/16-NC X 2-3/4") PIN COTTER PIN (3/16" X 2") PIGTAIL EXTERNAL SNAP RING (1.000") BOLT (1/2-NC X 4-1/2") SHOE FACING (6") SHOE FACING (8") SHOE FACING (6-1/2") SHOE LINK FACING STRAP LINK END CAP LOCKNUT (1/2-NC) LINK GUIDE PLATE SHOE FACING SHOE FACING SHOE FACING SHOE FACING SHOE FACING SHOE FACING SHOE BEAM (6") CLEANER TUBE (92") CLEANER TUBE (67") CLEANER TUBE (54-1/2") CLEANER TUBE (42") SLIDE/ROLLER PIN (4") CABLE/CHUTE PIN CYL PIN

REMARKS

SEE FOOTNOTE 1

USE WITH 54-1/2",

67" & 92" TUBES

USE WITH SHOE FOR 9-1/2" TO 23-1/2" APPLICATIONS FOR 6" &

8" SHOE FACINGS

FOR 9-1/2" & 10" FOR 11-1/2" FOR 14-1/2" & 15" FOR 17-1/2" & 18" FOR 20-1/2" & 21" FOR 23-1/2" INCL DECALS

USE WITH 42" TUBES (PIN WITH COTTER PIN HOLES) USE WITH 54-1/2", 67" & 92" TUBES

NOT SHOWN:

FOOTNOTES:

1. KIT INCLUDES REF.'S 1,2,4-8,10,14-17,19,20,22,24 & 25. REFER TO MOUNTING INSTRUCTIONS 060-009.

NOTE:

01

ID0140325

196

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS

HAMMER 3 5

4

SLIDE HAMMER 3 1

2

H

801-056

197

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS REF PART NO. NUMBER

1.

2.

3.

4.

5.

259-002 259-001 259-036 105-403 105-357 183-072 259-003

QTY

1 1 2 1 1

DESCRIPTION

REMARKS

BIT PULLER - SLIDE HAMMER BIT PULLER - HAMMER BIT PULLER JAM NUT (5/8-NC) LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER

INCL REF NO.'S 1 - 5 EARLY STYLE

FOOTNOTES

NOTE:

H

801-056

198

SPECIAL TOOLS - ALIG BIT PUNCH

5

3

4

1 9 2 8

6

H

7

801-057

199

SPECIAL TOOLS - ALIG BIT PUNCH REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

259-150 105-708 105-964 105-994 183-072 259-003 259-151 259-152 259-153 105-357

QTY

DESCRIPTION

REMARKS

INCL REF NO.'S 1 THRU 8

2 1 1 1 1 1 1 1 1

BIT PUNCH - SLIDE HAMMER SET SCREW (3/8-NC X 3/8", NLK) WASHER (.656") FLG LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER HEAVY BIT PUNCH-SLIDE HAMMER LIGHT BIT PUNCH-SLIDE HAMMER PUNCH ADAPTER-SLIDE HAMMER LOCKNUT (5/8-NC)

FOOTNOTES

NOTE:

H

801-057

200

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

201

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

202

NOTES:

ID0134963

203

ASSEMBLY DRAWINGS

ID0134912

204

HEADSHAFT GEARBOX - STANDARD DUTY H500, H600, H700, H800, H900

26

25

1 8 14

7 18 7

9 27 15 13 24

22

5 3

12 4

10 11 16 17 19 9 11 10

6 23 12

5 14 21 20

10

2

ID0093139

205

HEADSHAFT GEARBOX - STANDARD DUTY H500, H600, H700, H800, H900 REF PART NO. NUMBER

DESCRIPTION

REMARKS

INCLUDES REF NO.'S 1 THRU 24 INCLUDES REF NO.'S 1 THRU 24 INCLUDES REF NO.'S 1 THRU 24 H615/H610 H615/H610 INCLUDES REF NO.'S 14,18,19,21 & 24 INCLUDES REF NO.'S 14,18,19,21 & 24 INCLUDES REF NO.'S 14,18,19,21 & 24

1 6 12 2 2 AR AR AR 2 1 2 2 2 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 AR AR AR AR 1 1 1 1 4 1

GEARBOX - 14.24:1 (LO) GEARBOX - 11.65:1 (STD) GEARBOX - 8.66:1 (HI) GEARBOX - 14.24:1 (STD) GEARBOX - 11.65:1 (STD) LOW GEAR RATIO KIT STD GEAR RATIO KIT HI GEAR RATIO KIT DOWELL PIN (3/8" X 7/8") FLG LK BOLT (3/8-NC X 1") FLG LK BOLT (3/8-NC X 1-1/2") SQUEEZE BAND CLAMP (7/16") PLUG (08N, SQ, MAG) BULK HOSE (1/4", SOLD PER 1') BULK TUBING (1/4", SOLD PER 1') BULK TUBING (1/4"SOLD PER 1') BALL BEARING (1.968") BALL BEARING (2.165") GEARBOX SPACER TAPERED RACE (4.527") TAPERED BEARING (2.952") SLIP-ON COUPLER (02N-04H90) PICKUP TUBE (02N-02NF90-2") INTERNAL SEAL (2.875") AIR VENT (02N) GEAR OUTPUT PINION INPUT PINION (18T, 14-SPL) INPUT PINION (21T, 14-SPL) INPUT PINION (26T, 14-SPL) INPUT PINION (18T) INPUT PINION (21T) INPUT GEAR (66T, 19-SPL) INPUT GEAR (63T, 19-SPL) INPUT GEAR (58T, 19-SPL) FLANGE SHIM (.002") SHIM (.003") SHIM (.005") SHIM (.015") GEARBOX HALF GEARBOX HALF (MACHINED) BOLT LOCK MOTOR ADAPTER BOLT (1/2-NC X 1-1/4",CSK SOC) BALL BEARING (1.968")

1

BLACK SILCONE (10.67 OZ TUBE)

INCLUDED IN KITS 190-441,190-442 & 190-443

QTY

166-055 166-056 166-057 -

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

190-441 190-442 190-443 105-534 105-826 105-874 110-491 115-211 116-356 116-166 117-902 125-040 125-043 179-733 126-012 126-013 155-158 514-123 157-553 159-003 165-113 165-114 165-115 165-116 165-117 165-170 165-173 165-118 165-119 165-120 165-121 165-719 165-720 165-721 165-722 169-020 169-021 300-194 331-195 195-611 125-095

USE 1 @ 11.50" USE 1 @ 11.50" USE 1 @ 11.50"

STAMPED WITH GEARBOX RATIO

NOT SHOWN:

256-603

10

ID0093139

206

VIBRATOR

H730 AND H750

13

28

2 9

10 15 20 16

14

23

16

19

17 22

11

24

16

30 6 18

22

3

1

6

29

7 15

11

8

25

10 21 27 5 4

26

NOT USED WITH 106-842 SEE FOOTNOTE 4

14

TE NO

'0S

'

1

13

12

9

TO OUTSIDE

01

ID0140140

207

VIBRATOR

H730 AND H750 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

105-823 105-825 105-826 105-137 105-935 106-842 105-936 105-969 105-994 106-028 110-111 115-488 125-344 155-125 155-138 155-748 157-504 165-929 165-980 166-849 167-156 167-149 180-642 180-683 181-421 181-974 183-629 183-630 185-111 185-073 185-097 185-098 185-112 185-114 314-661 315-087 314-667

QTY

DESCRIPTION

26 8 8 8 2 2 2 2 4 4 2 4 4 1 2 2 4 4 2 2 1 1 1 1 2 2 1 1 4 1 1 1 1 1 2 1 1

FLG LK BOLT (5/16-NC X 3/4") FLG LK BOLT (3/8-NC X 3/4") FLG BOLT (3/8" X 1") CLIP NUT (5/16-NC) THRUST LOCKNUT (1.967-NS) LOCKNUT (1-31/32 NS) TANG LOCK WASHER (1.992") FLG BOLT (5/8-NC X 1-1/2") FLG LOCKNUT (5/8-NC) FLANGE BOLT (5/8-NC X 5",GD 8) SIGHT GAUGE (16S) INTERNAL SNAP RING (4.331") BEARING (SPHERICAL ROLLER) PLUG (04S) PLUG (16S) O-RING (916 D90) INTERNAL SEAL KEY (3/8" x 2.495") KEY (3/8" x .98") KEY (3/8" X 1.125") LEFT SHAFT RIGHT SHAFT MOTOR HUB (1.5") MOTOR HUB (1.75") GEAR SPACER TAPERED INSERT TAPERED PIN (1.500" X 10.850") TAPERED PIN (1.500" X 16.500") VIBRATOR WEIGHT REAR COVER LEFT GEAR RIGHT GEAR FRONT COVER FRONT COVER SIDE COVER PLATE VIBRATOR BOX VIBRATOR BOX

1

SEAL/BEARING DRIVER TOOL

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 4, OBSOLETE SEE FOOTNOTE 4 NOT USED WITH 106-842, SEE FOOTNOTE 4, OBSOLETE

SEE FOOTNOTE 4, OBSOLETE SEE FOOTNOTE 4

SEE FOOTNOTE 1

H630/H650

SEE FOOTNOTE 1

SEE FOOTNOTE 2 SEE FOOTNOTE 3

NOT SHOWN:

259-041

FOOTNOTES:

1-LONGER MOTOR HUB AND LONGER BOLTS ARE NEEDED WITH .375 THK COVER PLATE, BEGINS WITH S/N 2K0095-H/30 & 2K0099-H750.

2-ENDS WITH S/N 2J0451-H730 ENDS WITH S/N 2J0533-H750 3-BEGINS WITH S/N 2J0452-H730 BEGINS WITH S/N 2J0534-H750 4-USE KEY 166-849 & LOCKNUT 106-842 FOR ALL REPLACEMENTS. TORQUE 1500-1800 FT/LBS PER INSTRUCTIONS 051-032.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

01

ID0140140

208

209

210

211

212

213

214

HYDRAULIC CONTROL VALVE 3-SPOOL

21

22

23 25 22 20 8 4 18 19

TRENCH CLEANER STABILIZER

3

5 13

26

INLET 17

9

11 9

2

END COVER

24

6 12

6

9 14 10

16

13

7

SAW LIFT

3 4

1

01

15

7

ID0140599

215

HYDRAULIC CONTROL VALVE 3-SPOOL

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

QTY

158-593 105-053 3 500-686 4 500-587 6 500-026 6 500-027 3 500-419 3 500-592 3 500-192 12 500-627 3 500-629 3 500-580 1 500-581 500-602 1 500-300 6 500-590 1 500-591 155-709 500-301 3 500-625 6 500-302 2 105-530 3 110-082 3 314-543 3 365-295 3 110-505 1 110-531 2 106-103 4 105-078 4 362-615 1 331-172 1 116-353 1 116-480 1

DESCRIPTION

REMARKS

HYDRAULIC CONTROL VALVE NUT (3/8-NC) SECTION SEAL KIT SPOOL SEAL KIT WIPER SEAL HANDLE BRACKET CONNECTOR LINK STD. SPOOL POSITIONER KIT BOLT (1/4-NC X 7/8",SOC,GD8) VALVE SECTION UNLOCKING PISTON NO RELIEF PLUG SEAL REPAIR KIT INLET COVER SEAL RETAINER END COVER PLUG ASS'Y O-RING (912 D90) TIE BOLT LOCKOUT CHECK PLUG (12S) COTTER PIN (1/16" X 3/4") CLEVIS PIN (1/4" X 11/16") CONTROL VALVE HANDLE CONTROL VALVE HANDLE KNOB (1/2-NC, GRN) KNOB (1/2-NC, BLK) BOLT (1/4-NC X 1/2", BUT SOC) FLANGE LOCKNUT (1/4-NC) VALVE HANDLE COVER VALVE HANDLE COVER CUSHION CUSHION

INC REF #'S 1-8, 7-17

INCLUDES WASHER INC REF #'S 2-5, 7,8,10,13 & 16

INC REF #'s 11 & 17 INC REF #2

INC REF #1

H750, OBSOLETE H650

H750 H650 H750 H650

NOT SHOWN:

FOOTNOTES:

NOTE: NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

01

ID0140599

216

FLOW CONTROL VALVE

1

1

01

ID0140418

217

FLOW CONTROL VALVE REF PART NO. NUMBER

1.

158-596 500-702 500-703

QTY

1 1 1

DESCRIPTION

REMARKS

FLOW CONTROL VALVE CARTRIDGE SEAL KIT

INCLUDES REF NO. 1

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0140418

218

219

220

GREASE CYLINDERS 7

3

5

8

4

6 1

7

2

8 10 12 13 11 9

05

ID0129299

221

GREASE CYLINDERS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

151-052 151-051 190-178 152-002 157-078 155-712 150-433 115-024 115-019 115-012 155-016 150-627 152-001 157-560 157-561 157-562

QTY

DESCRIPTION

1 1 1 1 1 1 1 1 1 1 1 1 1

GREASE CYL (2" X 1.5" X 7") GREASE CYL (2.5" X 2.5" X 7") SEAL REPAIR KIT (2.5" X 2.5") CYLINDER BARREL (2.0") O-RING (222 D70) BACKUP RING (222 D90) CYLINDER ROD (1.5") ZERK (02N, 5000PSI) ZERK (02N) ZERK (04N) RELIEF PLUG (04S) CYLINDER ROD (2.5") CYLINDER BARREL(2.5") PISTON SEAL (1.975") ROD WIPER (2.492") RETAINER RING (2.625")

REMARKS

INCL REF NO.'S 3 THRU 8, SEE FOOTNOTE 1 INCL REF NO.'S 7 THRU 13, SEE FOOTNOTE 1 INCL REF NO.'S 11 THRU 13

EARLY STYLE STANDARD CYLINDER EARLY STYLE HEAVY DUTY CYLINDER

NOT SHOWN:

FOOTNOTES:

1. CYLINDER 151-051 HAS BEEN SUPERSEEDED BY 150-749 AND CYLINDER 151-052 HAS BEEN SUPERSEEDED BY 150-748. SEE PARTS PAGES 807-617 FOR A VIEW OF COMPONENTS BELONGING TO 150-748 AND 150-749

NOTE:

05

ID0129299

222

223

224

REEL CARRIER LIFT CYLINDER

6

FOOTNOTE 2

7

1

8

FOOTNOTE 5

3

2 5 4

02

ID0138322

225

REEL CARRIER LIFT CYLINDER REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

QTY

150-122 150-235 150-378 150-842 150-798 150-904 150-906 150-912 190-101 190-158 150-999

1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CYL (2.0" X 1.18" X 12.18") CYLINDER BARREL CYLINDER ROD CYLINDER HEAD CYLINDER HEAD SMOOTH BACKUP PISTON GROOVED PISTON LOCK RING SEAL REPAIR KIT SEAL REPAIR KIT PISTON

REEL CARRIER LIFT - INCL REF #'S

1-3 & 6-8

SEE FOOTNOTE 3 SEE FOOTNOTE 4 SEE FOOTNOTE 5 SEE FOOTNOTE 5 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 5 & 7

NOT SHOWN:

259-100 259-310

ROD U-SEAL INSTALLER PISTON SEAL INSTALLATION TOOL

FOOTNOTES:

1-THIS SEAL KIT IS NO LONGER AVAILABLE, US KIT LISTED BELOW. 2-USE ROD O-RING AND BACKUP COMBINATION FOR CYLINDER HEADS WITH .208" THK INTERNAL GROOVE. USE ROD U-SEAL FOR HEADS WITH .28" THK INTERNAL GROOVE. REFER TO INSTALLATION DIAGRAM 050-023 AND PISTON REPLACEMENT DIAGRAM 052-144.

3-THIS HEAD HAS .208" THK INTERNAL GROOVE DESIGNED FOR USE WITH O-RING AND BACKUP RING COMBINATIONS. THIS HEAD IS REPLACED BY HEAD WITH .28" THK INTERNAL GROOVE AND ROD U-SEAL. 4-THIS HAS .28" THK INTERNAL GROOVE DESIGNED FOR USE WITH ROD U-SEAL. 5-SINGLE PIECE 2" PISTON (REF #8) REPLACES TWO PIECES 2" PISTON (REF #'S 4 & 5).

6-PISTON BOLT TORQUE: 290-325 FT-LB. (395-440 N-M) 7-ADDED O-RING TO FACE OF PISTON. P/N 157-050 (216 D70) WILL BE INCLUDED IN DEAL REPAIR KIT. NOTE:

02

ID0138322

226

227

228

229

230

HYDRAULIC CYLINDER 3" X1.5" X3"

2

1 3 4 5

6

7

01

ID0140142

231

HYDRAULIC CYLINDER 3" X1.5" X3" REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

151-049 190-167 150-911 150-299 106-098 150-777 150-774 150-431

NOT SHOWN:

259-040 259-237 259-065 259-066 259-188

QTY

1 1 1 1 1 1 1

DESCRIPTION

REMARKS

HYDRAULIC CYLINDER SEAL REPAIR KIT LOCK RING (3") CYLINDER BARREL FLG BOLT (3/4-NC X 2",GD 8) PISTON CYLINDER HEAD CYLINDER ROD

INCL REF NO.'S 1 THRU 7

SEE FOOTNOTE 1

ROD U-SEAL INSTALLER ROD WIPER INSTALLER PISTON SEAL INSTALLER PISTON INSTALLER CYLINDER HEAD SPANNER WRENCH

FOOTNOTES:

1-USE LOCTITE 277; TORQUE TO 290-325 FT LBS (395-440 N.M)

NOTE:

01

ID0140142

232

HYDRAULIC CYLINDER

3.0" ID BARREL X 1.50" OD ROD X 4.0" STROKE

2

1 3 4 5

6

7

02

ID0138330

233

HYDRAULIC CYLINDER

3.0" ID BARREL X 1.50" OD ROD X 4.0" STROKE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

151-054 190-167 150-911 152-004 106-098 150-777 150-774 150-434

QTY

1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CYL (3.0" X 1.50" X 4.0") SEAL REPAIR KIT (3.0" X 1.50") LOCK RING (3") CYLINDER BARREL (3") FLG BOLT (3/4-NC X 2",GD 8) CYL PISTON (3.0" X 1.50") CYL HEAD (3") CYL ROD (1-1/2")

INCLUDES REF NO.'S 1 THRU 7

SEE FOOTNOTE 1

NOT SHOWN:

259-040 259-237 259-065 259-066 259-188

U-SEAL INSTALLER (1.500" - UP) ROD WIPER INSTALLER (1.5") PISTON SEAL INSTALLER (3") PISTON INSTALLER (3") CYL HEAD SPANNER-TWO PIN

FOOTNOTES:

1. USE LOCTITE 277, TORQUE TO 290-325 FT-LBS (395-440 N.M)

NOTE:

02

ID0138330

234

235

236

237

238

239

240

241

242

243

244

PIPE PULLER .625" - 1.250"

1

2

3

01

ID0139361

245

PIPE PULLER .625" - 1.250" REF PART NO. NUMBER

1.

2.

3.

368-290 107-113 107-114

QTY

1 1 1

DESCRIPTION

REMARKS

PIPE PULLER (.625" TO 1.250") NUT (#12-24) EYE BOLT (#12-24 X 1-1/2")

INCL REF NO.'S 2 AND 3

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0139361

246

NOTES:

ID0134963

247

MISCELLANEOUS

ID0135063

248

SAE Bolt and Nut Torque Value Chart Grade 5: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

12

16

8

11

20

27

5/16

25

34

15

20

45

60

3/8

40

54

25

34

75

100

7/16

65

90

40

55

125

170

1/2

100

135

60

80

190

260

9/16

150

200

90

125

270

370

5/8

200

270

120

165

370

500

3/4

350

475

210

285

650

880

7/8

560

760

340

460

1250

1425

1

840

1140

500

680

1580

2145

1-1/8

1030

1400

320

840

1950

3645

1-1/4

1460

1980

880

1195

2760

3475

Grade 8: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

14

19

10

14

24

33

5/16

30

40

18

25

50

70

3/8

55

73

35

50

90

125

7/16

85

115

50

70

140

190

1/2

130

175

80

110

220

300

9/16

190

260

110

150

310

420

5/8

260

355

160

245

430

585

3/4

450

610

270

365

750

1015

7/8

730

990

440

600

1210

1640

1

1090

1480

650

880

1320

2465

1-1/8

1550

2100

930

1260

2580

3500

1-1/4

2180

2955

1310

1780

3640

4935

*drilled and tapped

249

Metric Bolt and Cap Screw Torque Values Size

Class 4.8

Class 8.8 and 9.8

Class 10.9

Class 12.9

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

M6

4.8

3.5

6

4.5

9

6.5

11

8.5

13

9.5

17

12

15

11.5

19

14.5

M8

12

8.5

15

11

22

16

28

20

32

24

40

30

37

28

47

35

M10

23

17

29

21

43

32

55

40

63

47

80

60

75

55

95

70

M12

40

29

50

37

75

55

95

70

110

80

140

105

130

95

165

120

M14

63

47

80

60

120

88

150

110

175

130

225

165

205

150

260

190

M16

100

73

125

92

190

140

240

175

275

200

350

225

320

240

400

300

M18

135

100

175

125

260

195

330

250

375

275

475

350

440

325

560

410

M20

190

140

240

180

375

275

475

350

530

400

675

500

625

460

800

580

M22

260

190

330

250

510

375

650

475

725

540

925

675

850

625

1075

800

M24

330

250

425

310

650

475

825

600

925

675

1150

850

1075

800

1350

1000

M27

490

360

625

450

950

700

1200

875

1350

1000

1700

1250

1600

1150

2000

1500

M30

675

490

850

625

1600

950

1650

1200

1850

1350

2300

1700

2150

1600

2700

2000

M33

900

675

1150

850

1750

1300

2200

1650

2500

1850

3150

2350

2900

2150

3700

2750

M36

1150

850

1450

1075

2250

1650

2850

2100

3200

2350

4050

3000

3750

2750

4750

3500

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, these should only be tightened to strength of original.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Tighten plastic insert or crimped type steel locknuts to approximately 50% of dry torque indicated on chart.

Apply torque to the nut - not the bolt head. Tighten toothed or serrated type locknuts to full torque value.

LUBRICATED means coated with lubricant. DRY means plain or zinc plated without any type of lubricant.

250

Hydraulic Cylinder Bolt Torque Chart Bolt Size (inch)

Bolt Part No.

Cylinder Repair Kit Part No.

Torque (ft•lb)

Torque (N•m)

1/2

106-096

190-165

90-100

120-135

5/8

106-097

190-166 & 190-169

180-200

245-270

3/4

106-098

190-167 & 190-170

290-325

395-440

7/8

106-122

190-172 & 190-174

410-640

550-625

1

106-145

190-175 & 190-189

630-700

855-950

1-1/8

106-146

190-177

770-850

1045-1170

As a general rule: •

1/2-inch bolts are used in cylinders with 1-inch rods

•

5/8-inch bolts are used in cylinders with 1 1/4-inch rods

•

3/4-inch bolts are used in cylinders with 1 1/2-inch rods

•

7/8-inch bolts are used in cylinders with 1 3/4-inch rods

•

1-inch bolts are used in cylinders with 2-inch rods (one with 1 3/4-inch)

•

1-1/8-inch bolts are used in cylinders with 2-1/4-inch rods

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and torque to value shown on chart.

SAE & ORS Hydraulic Fitting Replacement O-Ring Chart Fraction Size

Dash Size

SAE (Port Seal O-Ring)

ORS (Face Seal O-Ring)

Thread Size

O-Ring P/N

Thread Size

O-Ring P/N

1/16

1

NA

NA

NA

NA

1/8

2

5/16 - 24

NA

NA

NA

3/16

3

3/8 - 24

NA

NA

NA

1/4

4

7/16 - 20

155-760

9/16 - 18

157-037

5/16

5

1/2 - 20

NA

NA

NA

3/8

6

9/16 - 18

155-705

11/16 - 16

157-038

1/2

8

3/4 -16

155-706

13/16 - 16

157-039

5/8

10

7/8 - 14

155-707

1 - 14

157-040

3/4

12

1-1/16 - 12

155-709

1-3/16 - 12

157-017

7/8

14

1-3/16 - 12

155-747

NA

NA

1

16

1-5/16 - 12

155-748

1-7/16 - 12

155-714

1-1/4

20

1-5/8 - 12

155-702

1-11/16 - 12

NA

1-1/2

24

1-7/8 - 12

157-001

2 -12

NA

2

32

2-1/2 - 12

NA

NA

NA

2-1/2

40

3 - 12

NA

NA

NA

3

48

3-1/2 - 12

NA

NA

NA

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current CMW part numbered o-ring, or dash size does not occur in current CMW applications SAE = straight thread fitting that seals by sandwiching a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORS = o-ring face seal; a type of fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface

251

252

H700 Series Related Publications Component

Ass’y

P/N

Model: H700 Attachment Parts Manual ........................................................... ............ 053-409 7520, 8020 Operators Manual ............................................................. ............ 054-469 Supplementary Maint Guide ................................................................ ............ 053-633 Digging Chain Guide ........................................................................... ............ 050-700 Special Tools Guide ............................................................................ ............ 052-901

VER.02

ID0134913

253

Parts Manual Change Request (Please print clearly)

Date: _______________________

Dealer No. (required): _____________________________

Your Name: _____________________________ Phone: _________________

Position: _____________________________

Fax: _________________

E-mail: __________________

Publication Information: Parts Manual No.: _____-_____

Model: __________

Illustration Part No.: Manual Page No.: 1. _____-_____ .......................................................... 1. __________ 2. _____-_____ .......................................................... 2. __________ 3. _____-_____ .......................................................... 3. __________ Nature of Change Request:

 Text

 Graphics

 Missing Information

Describe change requested (if possible, include copy of publication page with changes marked.): ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ Please fax completed form to Parts Manual Department (580) 572-3525 Thank you for taking the time to submit this request. We will contact you if further information is needed to process your request.

ID0135001

254

255

ID0040564

256

ID0135281