Ditch Witch H533 / H553 Parts Manual 053-2090 - PDF DOWNLOAD

H533/H553

Parts Manual

Issue 8

053-2090

1

H533/H553 ISSUE NO. 08PL-06/18 For Replacement Copy Order P/N 053-2090

Attachment for – RT55 This product and its use may be covered by one or more patents at http://patents.charlesmachine.works.

This manual contains information concerning the following models: H533 and H553

Copyright 2010, 2011, 2012, 2014, 2016, 2018 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Jet Trac, Roto Witch, Subsite, Fluid Miser, Power Pipe, Super Witch, Pierce Arrow, Zahn, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication. However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration reference numbers. ♦ Have equipment model and serial number on hand to help ensure you get the right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 04

ID0128552

4

WARRANTY _________________________ DW WARRANTY Policy August, 2016

POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse, abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part

by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 05

ID0134872

5

CONTENTS______________________ Decals

Accessories

H533 .......................................................... 8 H553 ........................................................ 10

Auger .......................................................72 Boom .......................................................80 Chain – 3.067”P ....................... 112, 114, 116 Chain, 50K Alligator & Shark – 2P........... 108 Chain, 50K Combo – 2P ......................... 106 Chain, 50K Duratooth – 2P .............. 94 - 102 Chain, 50K Welded ALG/Shark II – 2P .... 110 Chain, 50K/C2X ASB – 2P ...................... 104 Chain, PRM Alligator .............................. 118 Personnel Restraint 2P ............................ 84 Personnel Restraint 3P ............................ 86 Roller Boom – Non-Wear Bar 3P................... 78 Roller Boom 2P ........................................ 74 Roller Boom 3P ........................................ 76 Special Tool – Chain Jaws ........................ 120 Trench Cleaner 2P ................................... 88 Trench Cleaner 3P ................................... 90 Trench Cleaner Feed Tube ...................... 92 Trench Cleaner ........................................ 82

Frame Components Attachment Frame – H533......................... 18 Cable Guide 2-Post ROPS ....................... 46 Cable Guide 4-Post ROPS ....................... 48 Combo Frame – H553 ............................... 16 Headshaft and Sprocket – H553 ................ 34 Outboard Pivot Support – H553 ................. 36 Pivot Assembly – H553.............................. 32 Plow Arms................................................ 20 Plow Blades ............................................. 42 Skid Shoes / Sod Cutter ........................... 30 Stow Latch ............................................... 28 TDM Sensor Mount – H553 ....................... 44 Vibrator Assembly .................................... 22 Vibrator Cross Section ............................. 24 Vibrator Steering ...................................... 26 Weight Rack – H533.................................. 38 Weight Rack, Combo Units – H553 ........... 40

Hydraulics Cylinder – 3.5” x 2” x 22” .............................. 66 Cylinder – 3” x 1.5” ..................................... 68 Cylinder – 3” x 1.5” x 12” .............................. 64 Pivot Lift Hydraulics ................................. 54 Plow Lift Hydraulics .................................. 56 Plow Steering ........................................... 58 Swing Hydraulics ..................................... 52 Trencher & Vibrator Drive Hydraulics ....... 62 Vibrator Drive Hydraulics ......................... 60

Miscellaneous Bolt/Nut Torque Chart ............................ 124 Parts Manual Change Request ............. 129 Replacement O-Ring Chart .................... 127 Warranty Registration ............................ 132

ID0253278

6

7

DECALS

ID0135069

8

DECAL LOCATION

9

H533

8

4

10

2

1

4

11 6 3

4

2

1

7 11 6 5 3 11

07

ID0093639

9

DECAL LOCATION H533 REF PART NO. NUMBER

275-963 1 273-093 2 273-499 270-6269 3 270-1097 4 274-442 5 275-023 6 273-546 7 275-284 8 700-188 9 700-189 10 700-190 11 274-318

QTY

1 2 2 2 3 1 2 1 1 1 1 4

DESCRIPTION

DECAL KIT - H533 PLOW CONTROL H533 MODEL ID H533 MODEL ID WARNING CRUSHING WEIGHT LIFT LOCATION OIL LEVEL WARNING MOVING PARTS AMPLITUDE CHART PLOW RAISE/LOWER/FLOAT PLOW STEER L/R PLOW SWING L/R & FLOAT TIE DOWN LOCATION

REMARKS

LOCATED ON SEAT DECK. (OLD STYLE) (NEW STYLE)

FOOTNOTES

07

ID0093639

10

DECAL LOCATION H553

17 18 15

19

6

2 5 1

6 3

5 9 6 4 3 8

14 21 20 9 4 7 21

06

ID0093622

11

DECAL LOCATION H553

10 10

16 12 12

10 10

10

12 10

11 12 13

11 10

06

ID0093622

12

DECAL LOCATION H553 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

275-964 273-091 273-093 273-500 270-6261 273-526 274-002 274-442 275-023 275-043 273-546 275-230 275-231 275-232 275-233 275-284 700-176 700-178 700-188 700-189 700-190 700-192 274-318

QTY

1 1 2 2 2 2 3 1 1 2 4 4 1 2 1 1 2 1 1 1 1 4

DESCRIPTION

DECAL KIT - H553 DIGGING ATTACHMENT CONTROL PLOW CONTROL H553 MODEL ID H553 MODEL ID WARNING CRUSHING WEIGHT DANGER CHAIN & AUGER LIFT LOCATION OIL LEVEL CHAIN TENSION WARNING MOVING PARTS DANGER STRIPE 1.75" X 18" DANGER STRIPE 2.75" X 18" DANGER 1.75" X 18" DANGER 2.75" X 18" AMPLITUDE CHART RAISE/LOWER DIGGING BOOM DANGER STRIPE 2.75" X 15" PLOW RAISE/LOWER/FLOAT PLOW STEER L/R PLOW SWING L/R & FLOAT COMBO SELECT TIE DOWN LOCATION

REMARKS

LOCATED ON SEAT DECK. LOCATED ON SEAT DECK. (OLD STYLE) (NEW STYLE)

FOOTNOTES

06

ID0093622

13

14

NOTES:

ID0134963

15

FRAME COMPONENTS

16

COMBO FRAME H553

17

25

24 12

23

14

16 22

18

5

13

4 2

13

20

15

6 14

7

5 4 19 11

10

3 9

21

8 6

1

9

21 8

07

HOLE "A" 6

HOLE "B"

ID0008446

17

COMBO FRAME H553

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

1 CYL (2.5 X 1.25 X 2.0) 1 TAPERED PIN (38.1MM X 178MM) 1 TAPERED PIN (38.1MM X 230MM) 2 TAPERED INSERT (1.5") 2 FLG SCREW (M16-2.00 X 30MM) 18 FLG NUT (M16-2.00, 10.9) 16 FLG SCREW (M16-2.00X45MM,10.9) 2 SPACER 2 SCREW (M16 X 60MM 10.9) 1 COMPOSITION BUSHING (1.5") 1 COMPOSITION BUSHING (1.25") 1 CYLINDER COVER 6 FLG LK SCR (M12-1.75X35MM,SER) 6 FLG LK NUT (M12-1.75) 1 SPOILS FLAP 4 CLIP NUT (M10-1.50) 4 FLG LK SCREW (M10-1.50 X 30MM) 1 END PLATE 1 PIN 1 COMBO FRAME 2 WASHER (M16, HARDENED) 1 BOLT-ON CLAMP (1/2") 1 BOLT-ON CLAMP (.625") 1 PLUG WRENCH - 3/8" DRIVE 1 PLUG WRENCH 1/2" DRIVE

151-101 178-420 179-043 181-974 106-471 106-355 107-336 184-840 107-598 125-772 125-771 323-115 106-632 106-709 118-152 106-558 106-383 300-1741 310-919 300-1479 106-398 110-126 110-259 259-099 259-042

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 3 SEE FOOTNOTE 2

USED ON 2" & 3" P USED ON 3" P ONLY

NOT SHOWN:

FOOTNOTES:

1. WITH 31" TIRES, MOUNT ATTACHMENT WITH RESPECT TO HOLE "A" (AS SHOWN) WITH 35" TIRES, MOUNT ATTACHMENT WITH RESPECT TO HOLE "B".

2. ATTACHMENT FRAME 323-072 SUPERCEDED WITH 300-1479. BEGINS WITH S/N _______.

3. SEE 'OUTBOARD PIVOT SUPPORT' PAGE (ID0157724) FOR ADDITIONAL COMPONENTS

NOTE:

07

ID0008446

18

ATTACHMENT FRAME, H533 2 1

11

14

9

8 2 1 9

8

7 6

4

9 10 5

12 15

13

3

12

HOLE "A" 15

HOLE "B"

13 9

B

809-302

19

ATTACHMENT FRAME, H533 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

2 TAPERED INSERT (1.5") 2 FLG SCREW (M16-2.00 X 30MM) 1 CYL (2.5 X 1.25 X 4.0) 1 PIN 1 COMPOSITION BUSHING (1.5") 1 COMPOSITION BUSHING (1.25") 1 FLG LK SCREW (M12-1.75 X 25MM) 16 FLG SCREW (M16-2.00X45MM,10.9) 18 FLG NUT (M16-2.00, 10.9) 1 TAPERED PIN (38.1MM X 230MM) 1 TAPERED PIN (38.1MM X 178MM) 2 SCREW (M16 X 60MM 10.9) 2 SPACER 1 PLOW ATTACHMENT FRAME 2 WASHER (M16, HARDENED)

181-974 106-471 151-028 310-919 125-772 125-771 107-009 107-336 106-355 179-043 178-420 107-598 184-840 322-436 106-398

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

FOOTNOTES

1. WITH 31" TIRES, MOUNT ATTACHMENT WITH RESPECT TO HOLE "A" (AS SHOWN) WITH 35" TIRES, MOUNT ATTACHMENT WITH RESPECT TO HOLE "B".

NOTE:

B

809-302

20

PLOW ARMS 28

24 7

14

12

23

17 38

28

31

29

30 8

4

31 38

4

2

22

30

A 15 27 17

1

29

25

21

7 14

9

29

23 5

19

8

21 29

20 26 11 16

1

4

16

32

34

4 37

9

3

33 36

18 20

(22) 10

19

(31)

35

6 36

7 (1)

9 26

13 4

8 45°

36

DETAIL A

36

04

ID0004303

21

PLOW ARMS REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

185-1064 324-414 181-975 181-974 106-471 183-882 179-004 107-009 105-416 125-538 125-773 322-435 322-471 322-434 322-433 107-337 125-527 165-974 179-861 115-481 110-056 118-111 166-520 323-606 322-469 322-470 125-566 106-398 106-355 106-386 179-963 106-998 323-730 107-001 105-894 323-833 125-847 151-234 106-266

QTY

2 1 1 5 1 1 3 3 5 1 1 1 1 2 4 2 2 1 2 2 4 1 2 1 1 4 4 4 8 4 2 1 4 4 1 4 1 2

DESCRIPTION

TOP ARM WITH TORSION MOUNT SWING ARM TAPERED INSERT (1.75") TAPERED INSERT (1.5") FLG SCREW (M16-2.00 X 30MM) TAPERED PIN (44.4MM X 228.6MM) TAPERED PIN (38.1MM X 100MM) FLG LK SCREW (M12-1.75 X 25MM) WASHER (5/8") COMPOSITION BUSHING (1.5") COMPOSITION BUSHING (1.75") SWING POST UPPER PLOW ARM LOWER PLOW ARM PIN SCREW (M16-2.00 X 150MM, 10.9) COMPOSITION BUSHING KEY (1/4" X 1-1/2") PIN (1.25" X 4.00") EXTERNAL SNAP RING (1.25") MACH BUSHING (1-1/4", 18GA) STOP BUMPER TORSION MOUNT SIDE BRACKET LEFT BUMPER MOUNT RIGHT BUMPER MOUNT THRUST WASHER, 1.5 ID X 2.5 OD X .0585 WASHER (M16, HARDENED) FLG NUT (M16-2.00, 10.9) FLG LOCKNUT (M8-1.25) SPACER FLG LK SCREW (M10-1.50 X 70MM) BAR FLG LK SCREW (M10-1.50 X 25MM) LOCKNUT(M10-1.50,PRV TRQ,10.9) PIN COMPOSITION BUSHING (1.5 X 2.0 X 2.0) CYL (3.0 X 1.50 X 12.0) SPC. PORT FLG NUT (M10-1.50)

REMARKS

INCLUDES REF. NO.'S 12 & 22

SEE FOOTNOTE 2

SEE FOOTNOTE 2 SEE FOOTNOTE 1 TORQUE TO 170 ft. lbs.

SEAL REPAIR KIT 190-167

NOT SHOWN:

FOOTNOTES:

1. THRUST WASHERS (REF #26), INSTALL IN PAIRS, SMOOTH SIDES TOGETHER 2. SPECIAL ASSY. TOOLS REQUIRED. USE P/N 185-1064 FOR REPLACEMENT.

NOTE:

04

ID0004303

22

VIBRATOR ASSEMBLY H533, H553

7

23

21

20

3

4 15

2 13 14

17 5 7

7

11

10

8

8

6

12

1

12 6 22 22 14

13

15 8

9

2

18

5

12

7

1 8 17

21

06

20

7

16

19

7

18

ID0004251

23

VIBRATOR ASSEMBLY H533, H553 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

4 VIBRATOR WEIGHT 4 BEARING (SPHERICAL ROLLER) 2 MACHINED COVER 2 EXTERNAL SNAP RING (1.969") 4 KEY (3/8" X 2-29/64") 4 DOWEL PIN (3/8" X 1-1/2") 22 FLG NUT (M16-2.00, 10.9) 18 WASHER (M16, HARDENED) 1 REAR VIBRATOR SHAFT 1 FRONT VIBRATOR SHAFT 1 VIBRATOR FRAME 8 STUD BOLT (M16-2.00 X 55MM) 2 BOW TIE 4 SCREW (M8-1.25 X 25MM, SOC) 2 PLUG (16S) 1 SIGHT GAUGE (16S) 4 SCREW (M16-2.00 X 120MM, 10.9) 10 SCREW (M16-2.00 X 150MM, 10.9) 1 O-RING (916 D90) 3 COVER PLATE 6 FLG LK SCREW (M12-1.75 X 25MM) 4 SPRING BUSHING 1 PLUG, MAGNETIC (-16S)

185-364 125-344 320-739 115-507 165-929 105-536 106-355 106-398 166-515 166-624 320-967 106-520 322-446 106-916 155-138 110-111 106-614 107-337 155-748 322-443 106-806 125-751 152-150

DESCRIPTION

REMARKS

SEE FOOTNOTE 3

INCLUDES GEAR & DOWEL PIN. SEE FOOTNOTE 3 SEE FOOTNOTE 1 & 3 SEE FOOTNOTE 4, USE LOCTITE @ VIBRATOR FRAME SEE FOOTNOTE 2 TORQUE TO 150 ft. lbs.

TORQUE TO 150 ft. lbs.

SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. 166-516 FRONT VIBRATOR SHAFT IS SUPERSEDED BY 166-624 FRONT VIBRATOR SHAFT. INCLUDES GEAR, DOWEL PIN & MOTOR DRIVE HUB (178-907).

2. INCLUDES O-RING (19) 155-748.

3 REQUIRES ASS'Y KIT 190-1087. TAPERED BEARING ALIGNMENT PINS & BEARING DRIVER (SPECIAL TOOLS).

4. WHEN INSTALLING STUD BOLT, SHORT THREADED END SHOULD BE FLUSH WITH INNER SURFACE OF FRAME TO ALLOW FOR BLADE INSTALLATION.

NOTE:

06

ID0004251

24

VIBRATOR CROSS SECTION

.20

2.90

8.20

5.10

8.00

2.50

.10 GAP

SECTION A-A

A

809-323

25

26

VIBRATOR STEERING 9 5 8

9

14 1

8

13

3 13

1

4 2

11

10

17

7

16 4

4

10

11 7

7

1 7

15 10

6

16 10

4

12

17

10

9

8 9

8

1

9

8

5 D

809-308

27

VIBRATOR STEERING REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

4 THRUST BUSHING SET (1.5") 2 CASTLE NUT (1-1/2-NF) 1 UPPER KNUCKLE 4 COMPOSITION BUSHING (1.25") 2 CLEVIS PIN (2.00" X 7.00") 1 LOWER CLEVIS 4 PIN 5 WASHER (5/8") 5 FLG SCREW (M16-2.00 X 30MM) 5 FLG LK SCREW (M12-1.75 X 25MM) 2 ROLL PIN (1/4" X 2") 1 PIN 2 COMPOSITION BUSHING 1 ZERK (02N) 1 ZERK (02N90) AR MACH BUSHING (1-1/4", 14GA) AR MACH BUSHING (1-1/4", 18GA)

126-131 107-945 322-489 125-771 179-755 322-488 322-437 105-416 106-471 107-009 105-503 323-833 125-527 115-001 115-002 110-055 110-056

DESCRIPTION

REMARKS

FOOTNOTES

NOTE:

D

809-308

28

STOW LATCH

2

4

5

7

6

7 6 3

8 3 9

1 A

809-310

29

STOW LATCH REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

179-790 110-377 115-511 179-860 105-044 105-884 116-403 105-065 322-421

QTY

DESCRIPTION

1 STOW LOCK PIN 1 KNOB (1/2-NC, BLUE) 2 KLIP RING (1.50") 1 STOW LOCK HANDLE 1 JAM NUT (1/2-NC) 2 WASHER (1/2") 2 FRICTION WASHER (.560") 1 LOCKNUT (1/2-NC) 1 STOW LOCK

REMARKS

LOCTITE

FOOTNOTES

NOTE:

A

809-310

30

SKID SHOES / SOD CUTTER

3

7 2

6

5 1

8 4

5 9 5

5

1

4

9

2 3

B

809-309

31

SKID SHOES / SOD CUTTER REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

351-582 105-915 105-319 116-100 105-982 331-661 106-355 107-336 320-546

QTY

2 2 2 2 4 1 4 4 2

DESCRIPTION

KEY (1/4" X 3-3/4") WASHER (.781") BOLT (3/4-NC X 1-1/2") SHOCK MOUNT WASHER (2.062") SOD CUTTER FLG NUT (M16-2.00, 10.9) FLG SCREW (M16-2.00X45MM,10.9) SKID SHOE

REMARKS

INCLUDES REF. NO. 4

FOOTNOTES

NOTE:

B

809-309

32

PIVOT ASSEMBLY

6

H553

16

15

22

17 18

9

8

26 20 13

24

25 14 12

21

5

6

11

19

3

2

10

1 23

7

4

05

ID0008473

33

PIVOT ASSEMBLY H553

REF PART NO. NUMBER

QTY

1 313-774 2 106-949 3 107-720 4 106-851 5 322-759 6 125-754 7 143-116 8 125-644 9 145-980 10 107-598 11 106-442 12 323-158 13 107-683 14 115-002 15 179-378 16 184-064 17 106-399 18 106-344 19 322-952 20 106-709 21 106-398 22 151-047 23 140-540 24 141-752 25 115-004 26 115-001

1 BOOM CLAMP PLATE 4 WASHER (3/4", HARDENED) 4 SCREW (M18-2.5 X 160MM, 10.9) 4 LOCKNUT (M18-2.5) 1 PIVOT CAP 2 COMPOSITION BUSHING (2") 1 3P BOOM STUB 1 GROOVED PIVOT SLEEVE 1 PIVOT SLEEVE 4 SCREW (M16 X 60MM 10.9) 4 FLG LKNUT (M16-2.0,PRVTRQ10.9) 1 PIN 1 CARRIAGE BOLT(M12-1.75 X 30MM) 1 ZERK (02N90) 1 TAPERED PIN (2.000" X 8.500") 1 TAPERED INSERT (2") 1 WASHER (M20, HARDENED) 1 SCREW (M20-2.50 X 40MM) AR PIVOT CAP SHIM 1 FLG LK NUT (M12-1.75) 4 WASHER (M16, HARDENED) 1 CYL (3.5 X 2.00 X 12.0) 1 2P BOOM STUB 1 PIVOT 1 ZERK (04N45) 1 ZERK (02N)

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0008473

34

HEADSHAFT AND SPROCKET H553

2

3

2

15 7 1

12 10

4 11

11

6

17

5

13 14 18

16 8 9

(14) (16) 04

PROPER ORIENTATION OF REF #16 WITH INDENTED SIDE FACING SPROCKET HUB (178-099).

ID0022492

35

HEADSHAFT AND SPROCKET H553

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

1 BALL BEARING (2.362") 2 EXTERNAL SNAP RING (2.375") 1 INTERNAL SNAP RING (4.331") 1 BALL BEARING (2.362", DBL ROW) 1 INTERNAL SEAL 1 HEADSHAFT 1 DRIVE HUB 2" PITCH 1 WASHER (3/4") 1 SCREW (M20-2.50 X 40MM) 1 BACKING RING 16 CAM WASHER (1/2") 2 SPROCKET HALF, 14T 2P 8 SCREW (M12-1.75 X 45 MM) 1 SPROCKET HUB 3" PITCH 2 SPROCKET (2.000"A12, SPLIT) 1 HEADSHAFT SPROCKET 16 CAM WASHER (5/8") 8 SCREW (M16-2.00 X 40MM, 10.9)

125-073 115-489 115-488 125-140 157-583 165-531 178-914 105-423 106-344 140-696 105-159 142-044 105-761 178-099 142-127 142-009 105-497 106-478

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 USED WITH 14T SPROCKET

NOT SHOWN:

FOOTNOTES:

1. USE LOCTITE WHEN INSTALLING BOLT IN THE END OF HEADSHAFT.

NOTE:

04

ID0022492

36

OUTBOARD PIVOT SUPPORT H553

4

5

2

3

8

1 9

01

6

7

9

ID0157724

37

OUTBOARD PIVOT SUPPORT H553

REF PART NO. NUMBER

QTY

1 300-1741 2 300-2385 3 300-1740 4 300-1379 5 107-008 6 300-1887 7 115-891 8 300-1759 9 107-010

1 1 1 1 6 1 2 1 8

DESCRIPTION

REMARKS

END PLATE PIVOT SUPPORT WEAR RING BASE WEAR RING HOUSING FLG LK SCREW (M12-1.75 X 50MM) SUPPORT CAP NYLON WASHER (4.920") PIVOT WEAR STRIP FLG LK SCREW (M12-1.75 X 30MM)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0157724

38

WEIGHT RACK H533

4

8

5 9

6 3

2

1

03

7

6

ID0004422

39

WEIGHT RACK H533

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

191-403 323-761 323-762 375-080 105-337 105-994 105-384 105-953 105-442 180-190

QTY

DESCRIPTION

WEIGHT MOUNT KIT 1 LEFT WEIGHT RACK 1 RIGHT WEIGHT RACK 12 COUNTERWEIGHT 6 FLANGE BOLT (5/8-NC X 2") 6 FLG LOCKNUT (5/8-NC) 4 WASHER (3/4") 2 LOCKNUT (3/4-NC) 2 BOLT (3/4-NC X 13-1/2") 2 BUSHING

REMARKS

ITEMS 1 & 2 ARE INCLUDED WITH KIT 191-403 ORDER WEIGHTS SEPARATLY ITEM 4-9 ARE INCLUDED WITH KIT 191-403

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0004422

40

WEIGHT RACK - COMBO UNITS H553/H853

2

6 3 7

8

4

1

5 4

06

ID0014740

41

WEIGHT RACK - COMBO UNITS H553/H853 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

3 3 3 2 1 1 1 1

375-080 105-337 105-994 105-384 105-953 105-906 180-190 323-762

DESCRIPTION

COUNTERWEIGHT FLANGE BOLT (5/8-NC X 2") FLG LOCKNUT (5/8-NC) WASHER (3/4") LOCKNUT (3/4-NC) BOLT (3/4-NC X 8-1/2") BUSHING RIGHT WEIGHT RACK

REMARKS

ORDER COUNTER WEIGHTS SEPARATELY ITEMS 2-8 ARE INCLUDED WITH KIT 191-369

NOT SHOWN:

191-369

WEIGHT MOUNT KIT (REAR)

FOOTNOTES:

NOTE:

06

ID0014740

42

PLOW BLADES H533/H553

15 THRU 18

2

27 1 27 2

1

13 & 14

11 & 12

1

3

THRU 10

19

THRU 26

B

809-487

43

PLOW BLADES H533/H553 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

4 LYNCH PIN (7/16" X 2") 2 PLOW PIN (1-1/2") 1 FEED BLADE ASS'Y (.75X3.0X24/30) 1 FEED BLADE ASS'Y (.75X3.0X18/24) 1 FEED BLADE ASS'Y (1.0X10X24/30) 1 FEED BLADE ASS'Y (1.0X10X18/24) 1 FEED BLADE ASSY (1.5X6.5X24/30) 1 FEED BLADE ASSY (1.5X6.5X18/24) 1 FEED BLADE ASSY (2.0 X 8.0 X 24/30) 1 FEED BLADE ASSY (2.0 X 8.0 X 18/24) 1 PULL BLADE ASSY (24/30) 1 PULL BLADE ASSY (18/24) 1 BULLET BLADE ASSY (3.0X24/30) 1 BULLET BLADE ASSY (3.0X18/24) 1 WING BOLT (3/8-NC X 1-3/4") 1 WING BOLT (3/8-NC X 3") 1 WING BOLT (3/8-NC X 2-1/2") 1 WING BOLT (3/8-NC X 2") 1 CABLE GUIDE ASS'Y (.75X3.0X24/30) 1 CABLE GUIDE ASS'Y (.75X3.0X18/24) 1 CABLE GUIDE ASS'Y (1.0X10X24/30) 1 CABLE GUIDE ASS'Y (1.0X10X18/24) 1 CABLE GUIDE ASSY (1.5X6.5X24/30) 1 CABLE GUIDE ASSY (1.5X6.5X18/24) 1 CABLE GUIDE ASSY (2.0 X 8.0 X 24/30) 1 CABLE GUIDE ASSY (2.0 X 8.0 X 18/24) 4 SPRING BUSHING

110-228 179-777 185-397 185-398 185-399 185-400 185-421 185-422 185-423 185-424 185-427 185-428 185-425 185-426 106-022 106-025 106-024 106-023 185-431 185-432 185-433 185-434 185-473 185-475 185-477 185-487 125-751

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN NOT SHOWN

FOOTNOTES

1. FEED BLADE ASSEMBLIES, REF #3 THRU 10, INCLUDE APPROPRIATE WING BOLT, REF #15-18 & APPROPRIATE CABLE GUIDE ASSEMBLIES, REF #19-26.

NOTE:

B

809-487

44

TDM SENSOR MOUNT H553/H853

2 1 1 2

05

ID0023662

45

TDM SENSOR MOUNT H553/H853 REF PART NO. NUMBER

QTY

1 2

2 TDM BOOM SENSOR 4 SCREW #10-24 X 2 1/4" SOC HEAD

220-556 107-895

DESCRIPTION

REMARKS

USE LOCTITE 401 OR EQUIVALENT

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0023662

46

CABLE GUIDE 2-POST ROPS

1

12

12

4

6

2

5

6 3

6 8 2

7

4

7 3

9

6

1

7

9 10

10 11

B

7

11

809-318

47

CABLE GUIDE 2-POST ROPS REF PART NO. NUMBER

QTY

191-496 184-453 107-520 110-033 117-207 320-557 106-496 106-709 185-545 318-199 105-069 105-081 105-814

4 4 4 4 1 4 4 1 2 4 4 4

1 2 3 4 5 6 7 8 9 10 11 12

DESCRIPTION

CABLE GUIDE KIT, 2-POST SPACER TUBE PIN (.375" X 3.75") HAIR CLIP PIN (1/8" X 1/2") COMPRESSION SPRING 2-POST CABLE GUIDE FLG SCREW (M12-1.75 X 35MM) FLG LK NUT (M12-1.75) CABLE GUIDE (H533 - H553) MOUNT BAR WASHER (.406") BOLT (3/8-NC X 3-1/4") FLG LOCKNUT (3/8-NC)

REMARKS

H533/H553 & SEE FOOTNOTE 2

SEE FOOTNOTE 1

SEE FOOTNOTE 2

FOOTNOTES

1. SPRING 117-207 IS A PRESS FIT ON CLIP PIN. INSTALL WITH SMALL END OF SPRING AGAINST HEAD OF CLIP RING. 2. CABLE GUIDE KIT 191-338 REPLACED BY KIT 191-496. CABLE GUIDE 185-365 REPLACED BY CABLE GUIDE 185-545.

NOTE:

B

809-318

48

CABLE GUIDE 4-POST ROPS

10

10 10 10

8

1

9

4 2

3

9

5 5 9

5

7

6

9

2 4

6

3

1

6 6

B

809-479

49

CABLE GUIDE 4-POST ROPS REF PART NO. NUMBER

QTY

191-497 184-453 107-520 110-033 117-207 106-496 106-709 185-545 319-667 105-866 105-003

4 4 4 4 4 4 1 1 4 4

1 2 3 4 5 6 7 8 9 10

DESCRIPTION

CABLE GUIDE KIT, 4-POST SPACER TUBE PIN (.375" X 3.75") HAIR CLIP PIN (1/8" X 1/2") COMPRESSION SPRING FLG SCREW (M12-1.75 X 35MM) FLG LK NUT (M12-1.75) CABLE GUIDE (H533 - H553) 4-POST CABLE GUIDE FLG LK BOLT (5/16-NC X 1.250") FLG LOCKNUT (5/16-NC)

REMARKS

H533/H553 & SEE FOOTNOTE 2

SEE FOOTNOTE 1 SEE FOOTNOTE 2

FOOTNOTES

1. SPRING 117-207 IS A PRESS FIT ON CLIP PIN. INSTALL WITH SMALL END OF SPRING AGAINST HEAD OF CLIP RING 2. CABLE GUIDE KIT 191-406 REPLACED BY KIT 191-497. CABLE GUIDE 185-365 REPLACED BY CABLE GUIDE 185-545.

NOTE:

B

809-479

50

NOTES:

ID0134963

51

HYDRAULICS

52

SWING HYDRAULICS

SWING SWING

9

8

3

1 4

TOP PORT

BOTTOM PORT 10

5 7

7

6

2

4 4

03

ID0004464

53

SWING HYDRAULICS REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10

154-276 151-028 155-163 154-226 154-728 151-101 117-411 159-602 157-972 153-317

QTY

1 1 1 3 1 1 2 1 1 1

DESCRIPTION

CONNECTOR (04O-08S90) CYL (2.5 X 1.25 X 4.0) REDUCER (08S-06SF) CONNECTOR (04O-06S90) HOSE (04OFX90S-36"-3000) CYL (2.5 X 1.25 X 2.0) ABRASION SLEEVE (1.00" X 32") HYD CONTROL VALVE (3-SPOOL) HYD CONTROL VALVE (4-SPOOL) HOSE (04OFX45-35"-3000)

REMARKS

PLOW ONLY & SEE FOOTNOTE 1

COMBO ONLY & SEE FOOTNOTE 1 PLOW ONLY COMBO ONLY

NOT SHOWN:

FOOTNOTES:

1. SEAL REPAIR KIT 190-166

NOTE:

03

ID0004464

54

PIVOT LIFT HYDRAULICS

TO BOTTOM PORT 1

2

TRENCHER LIFT 9

10

PLOW LIFT

6 TO TOP PORT 8 3

7 4 5 5

8 5

C

809-315

55

PIVOT LIFT HYDRAULICS REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10

154-261 151-047 153-995 153-998 154-276 515-229 515-229 117-245 110-442 116-941

QTY

DESCRIPTION

1 CONNECTOR (04O-08S) 1 CYL (3.5 X 2.00 X 12.0) 1 CONNECTOR (08S-08SF) 1 ORIFICE PLATE (.062) 3 CONNECTOR (04O-08S90) 1 HOSE (04OFX-34"-3000) 1 HOSE (04OFX-34"-3000) 2 ABRASION SLEEVE (1.25" X 33") 1 HANDLE (3/8-NC, GREEN) 1 HANDLE (3/8-NC, GREEN)

REMARKS

SEAL REPAIR KIT 190-175

TRENCHER LIFT & SEE FOOTNOTE 1 PLOW LIFT & SEE FOOTNOTES 1 & 2

FOOTNOTES

1. REMOVE SUPPLIER INSTALLED BLACK HANDLE, INSTALL CMW GREEN HANDLE. 2. GREEN HANDLE 116-941 HAS A FULLY ROUND TOP.

NOTE:

C

809-315

56

PLOW LIFT HYDRAULICS 13 PLOW LIFT

12 5

6

TOP PORT

6 BOTTOM PORT

10

8

4 1

3

2

9

11

1 11 7

3

B

809-314

57

PLOW LIFT HYDRAULICS REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13

110-270 305-256 154-226 106-331 153-998 154-276 151-234 515-440 105-894 515-440 117-693 153-995 116-941

QTY

DESCRIPTION

2 BOLT-ON CLAMP (9/16", HALF) 1 BACKUP SPACER 2 CONNECTOR (04O-06S90) 1 SCREW (M10-1.50 X 50MM) 1 ORIFICE PLATE (.062) 2 CONNECTOR (04O-08S90) 1 CYL (3.0 X 1.50 X 12.0) SPC. PORT 1 HOSE (04OFX-64"-3000) 1 LOCKNUT(M10-1.50,PRV TRQ,10.9) 1 HOSE (04OFX-64"-3000) 2 ABRASION SLEEVE (1.00" X 60") 1 CONNECTOR (08S-08SF) 1 HANDLE (3/8-NC, GREEN)

REMARKS

SEAL REPAIR KIT 190-167

PLOW LIFT & SEE FOOTNOTE 1

FOOTNOTES

1. REMOVE SUPPLIER INSTALLED BLACK HANDLE, INSTALL CMW GREEN HANDLE (116-941).

NOTE:

B

809-314

58

PLOW STEERING STEER 27 STEER 12

3

28 10 POWER BEYOND

9 8 RETURN SUPPLY 8 BOTTOM PORT TO LEFT TEE

11 15

TOP PORT TO RIGHT TEE

26

14

5

13

25

1 1

18

29

A

20

25 26

29

1

19

4 21 18

21

14

15

13

16 19

23 2

17 16 24 24

22

6

24 24

20

BRACKET: REF #13 ATTACHES THRU

17

7

04

1

2

DETAIL A 1:4 ID0004424

59

PLOW STEERING REF PART NO. NUMBER

QTY

1 110-270 2 149-673 3 159-602 4 154-841 5 154-841 6 515-425 7 515-425 8 154-279 9 154-276 10 155-163 11 154-226 12 106-381 13 154-424 14 106-598 15 117-209 16 117-676 17 117-410 18 360-865 19 110-333 20 105-245 21 106-266 22 515-019 23 515-019 24 154-252 25 305-256 26 106-331 27 157-972 28 154-322 29 105-894

4 2 1 1 1 1 1 2 1 1 1 4 2 2 2 2 2 2 2 2 2 1 1 4 2 2 1 1 2

DESCRIPTION

BOLT-ON CLAMP (9/16", HALF) CYL (2.0 X 1.25 X 6.0) HYD CONTROL VALVE (3-SPOOL) HOSE (04OFX45-94"-3000) HOSE (04OFX45-94"-3000) HOSE (04OFX45-42"-3000) HOSE (04OFX45-42"-3000) CONNECTOR (08O-10S) CONNECTOR (04O-08S90) REDUCER (08S-06SF) CONNECTOR (04O-06S90) FLG LK SCREW (M8-1.25 X 25MM) BK RUN TEE (04O-04O-04OBK) WASHER (9/16" HARDENED) ABRASION SLEEVE (1.00" X 90") ABRASION SLEEVE (1.00" X 30") ABRASION SLEEVE (1.00" X 38") MOUNTING TAB BOLT-ON CLAMP (1") SCREW (M10-1.50 X 25MM) FLG NUT (M10-1.50) HOSE (04OFX45-34"-3000) HOSE (04OFX45-34"-3000) CONNECTOR (04S-04O90) BACKUP SPACER SCREW (M10-1.50 X 50MM) HYD CONTROL VALVE (4-SPOOL) CONNECTOR (08O-10S90) LOCKNUT(M10-1.50,PRV TRQ,10.9)

REMARKS

SEAL REPAIR KIT 190-169 H533 ONLY

USE WITH HOSE 515-019 (2X) USE WITH HOSE 515-425 (2X)

H553 COMBO ONLY

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0004424

60

VIBRATOR DRIVE HYDRAULICS

20 10 7 PRESSURE RETURN

19 15 17

9 6 12 3 14

11

1 2 8 16

4

18

13 5

02

ID0199101

61

VIBRATOR DRIVE HYDRAULICS REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

159-534 106-806 159-622 105-159 514-196 154-281 154-388 154-390 106-382 159-664 154-497 155-074 154-253 159-612 159-665 515-059 110-930 117-211 117-197 117-098

QTY

1 2 1 4 1 2 2 1 4 1 1 2 1 1 1 1 2 1 1 1

DESCRIPTION

HYDRAULIC MOTOR FLG LK SCREW (M12-1.75 X 25MM) HYDRAULIC MANIFOLD BLOCK CAM WASHER (1/2") CONNECTOR (16O-20S90) CONNECTOR (16S-16O) CONNECTOR (16S-16O45) BK CONNECTOR (08O) FLG LK SCREW (M10-1.50 X 20MM) HOSE (16FX90-96"-3000) CONNECTOR (16O-20S) PLUG (08S, SOC, FM) CONNECTOR (06S-08090) RELIEF VLV CARTRIDGE(2500 PSI) HOSE (16FX-87"-3000) HOSE (08OFX45-94"-3000) SPIRAL WRAP (1.5",SOLD PER FT) ABRASION SLEEVE (1.25" X 90") ABRASION SLEEVE (2.07" X 90") ABRASION SLEEVE (2.07" X 100")

REMARKS

40" LONG

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0199101

62

TRENCHER AND VIBRATOR DRIVE HYDRAULICS 21

22

43

27

20

19

20

28 31

5

23 12

24

44

35

30

3 15 RETURN 10

15 PRESSURE 4 10

45

16

42

17 32

38 40

18

2 29

20

8

36 20

9

6

7

37

39

42

13 26

8

25

7

41 11

1 26 25

46 48 47

13 14 33

46

07

34

ID0008566

63

TRENCHER AND VIBRATOR DRIVE HYDRAULICS REF PART NO. NUMBER

QTY

1 150-1038 2 159-649 3 105-095 4 110-102 5 106-052 6 159-534 7 106-806 8 105-159 9 154-497 10 106-382 11 514-196 12 105-213 13 154-253 14 154-377 15 154-281 16 154-390 17 154-257 18 155-074 19 116-921 20 154-388 21 323-120 22 110-439 23 110-149 24 179-815 25 106-398 26 106-340 27 105-197 28 106-198 29 115-477 30 110-150 31 105-523 32 159-612 33 154-306 34 154-290 35 105-832 36 515-650 37 515-724 38 154-711 39 515-059 40 159-665 41 159-664 42 110-930 43 117-197 44 117-098 45 117-211 46 115-680 47 117-409 48 149-130

1 1 1 1 1 1 2 4 1 4 1 1 2 1 2 1 1 2 1 4 1 1 1 1 4 4 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 1 1

DESCRIPTION

HYDRAULIC MOTOR (MID SPEED) SELECTOR VALVE WASHER (1/4") ROD END (3/8-NF, FM) BOLT (3/8-NF X 1-7/8", GD8) HYDRAULIC MOTOR FLG LK SCREW (M12-1.75 X 25MM) CAM WASHER (1/2") CONNECTOR (16O-20S) FLG LK SCREW (M10-1.50 X 20MM) CONNECTOR (16O-20S90) NUT (5/16-NF) CONNECTOR (06S-08090) CONNECTOR (12S-16O90) CONNECTOR (16S-16O) BK CONNECTOR (08O) UN BR TEE (08OFX-08O-08O) PLUG (08S, SOC, FM) HANDLE CONNECTOR (16S-16O45) BELL CRANK HANDLE (3/8-NC, BLACK) CLEVIS (5/16-NF, FM) TIE ROD WASHER (M16, HARDENED) SCREW (M16-2.00 X 50MM) BOLT (1/4-NC X 1") FLG LOCKNUT (1/2-NC, GD8) GRIP RING (.375") CLEVIS PIN (5/16" X 1") COTTER PIN (.125" X .750") RELIEF VLV CARTRIDGE(2500 PSI) CONNECTOR (12S-16O) UNION (16O-16OFX90) FLG LOCKNUT (1/4-NC) HOSE (16OFX45-23"-3000) HOSE (16OFX45-25"-3000) HOSE (08OFX-30"-3000) HOSE (08OFX45-94"-3000) HOSE (16OFX-87"-3000) HOSE (16OFX90-96"-3000) SPIRAL WRAP (1.5",SOLD PER FT) ABRASION SLEEVE (2.07" X 90") ABRASION SLEEVE (2.07" X 100") ABRASION SLEEVE (1.25" X 90") ABRASION SLEEVE (2.07" X 21") ABRASION SLEEVE (1.00" X 28") O-RING (356 D70)

REMARKS

STANDARD

USE 2 @ 40"

NOT SHOWN:

150-1039 150-1040

07

1 HYDRAULIC MOTOR (LOW SPEED) 1 HYDRAULIC MOTOR (HIGH SPEED)

OPTIONAL OPTIONAL

ID0008566

64

HYDRAULIC CYLINDER (3.0" X 1.5" X 12.0" )

1 6

11 13

12

5

7 8

4

9 3

10

2

B

809-374

65

HYDRAULIC CYLINDER (3.0" X 1.5" X 12.0" ) REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13

151-234 159-914 150-426 150-774 150-911 150-777 106-098 155-734 155-733 157-542 157-539 125-776 157-536 157-020

QTY

1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

CYL (3.0 X 1.50 X 12.0 SPECIAL) CYLINDER BARREL (3.0 X 12.0) CYLINDER ROD (1.50 X 12.0) CYLINDER HEAD (3.0 X 1.50) LOCK RING (3.0) CYLINDER PISTON (3.0 X 1.50) FLG BOLT (3/4-NC X 2", GD8) O-RING (334 D90) BACKUP RING (334 D90) U-SEAL (1.500") WIPER SEAL (1.500") WEAR RING BACKUP RING (230 D90) O-RING (230 D90)

REMARKS

SEE FOOTNOTE 1

SEE FOOTNOTE 2

FOOTNOTES

1. SEAL KIT P/N: 190-167 2. APPLY LOCTITE 277 OR EQUIVALENT, TORQUE TO 290-325 FT-LBS

NOT SHOWN

259-040 259-239 259-244 259-245 259-188

B

U-SEAL INSTALLER (1.5"-UP) WIPER/SEAL INSTALLER (2") PISTON SEAL INSTALLER (3.5") PISTON INTALLER (3.5") CYL HEAD SPANNER-TWO PIN

809-374

66

HYDRAULIC CYLINDER (3.5" X 2.0" X 22.0")

4

3

1 5

2

D

806-744

67

HYDRAULIC CYLINDER (3.5" X 2.0" X 22.0") REF PART NO. NUMBER

1.

2.

3.

4.

5.

150-750 149-176 149-178 150-759 149-302 190-979 149-509 107-589 N/A N/A N/A N/A

NOT SHOWN: N/A N/A N/A N/A

QTY

DESCRIPTION

REMARKS

INCLUDES REF NO.'S 1 THRU 5

1 1 1 1 1 1 1 1 1 1 1

CYL (3.5" X 2.0" X 22.0") CYL BARREL CYL ROD CYLINDER HEAD LOCK RING (3.5") SEAL REPAIR KIT (3.5" X 2.0") PISTON 3.5" X 2.0" (NON-TYPICAL) BOLT (1-1/8-NC X 2-1/2 ", GD8) O-RING (338 D90) BACKUP RING (338 D90) U-SEAL WIPER SEAL

1 1 1 1

PISTON SEAL PISTON O-RING EXPANDER WEAR RING LOCK RING

PART OF SEAL REPAIR KIT PART OF SEAL REPAIR KIT PART OF SEAL REPAIR KIT PART OF SEAL REPAIR KIT

SEE FOOTNOTE 1

FOOTNOTES

1. APPLY LOCTITE 271 OR 277. TORQUE TO 650-700 FT-LBS.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

D

806-744

68

HYDRAULIC CYLINDERS (3.0" X 1.5")

1

6 11 13

12

5

7 8 4 9 10

3

2

02

ID0015860

69

HYDRAULIC CYLINDERS (3.0" X 1.5") REF PART NO. NUMBER

QTY

1 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

CYL (3.0 X 1.5 X 2.5) CYLINDER BARREL (3.0 X 2.5) CYLINDER ROD (1.50 X 2.5) CYL (3.0 X 1.5 X 3.0) CYLINDER BARREL (3.0 X 3.0) CYLINDER ROD (1.50 X 3.0) CYL (3.0 X 1.5 X 4.0) CYLINDER BARREL (3.0 X 4.0) CYLINDER ROD (1.50 X 4.0) CYL (3.0 X 1.5 X 5.0) CYLINDER BARREL (3.0 X 5.0) CYLINDER ROD (1.50 X 5.0) CYL (3.0 X 1.5 X 6.0) CYLINDER BARREL (3.0 X 6.0) CYLINDER ROD (1.50 X 6.0) CYL (3.0 X 1.5 X 8.0) CYLINDER BARREL (3.0 X 8.0) CYLINDER ROD (1.50 X 8.0) CYL (3.0 X 1.5 X 10.0) CYLINDER BARREL (3.0 X 10.0) CYLINDER ROD (1.50 X 10.0) CYL (3.0 X 1.5 X 12.0) CYLINDER BARREL (3.0 X 12.0) CYLINDER ROD (1.50 X 12.0) CYL (3.0 X 1.5 X 16.0) CYLINDER BARREL (3.0 X 16.0) CYLINDER ROD (1.50 X 16.0) CYL (3.0 X 1.5 X 20.0) CYLINDER BARREL (3.0 X 20.0) CYLINDER ROD (1.50 X 20.0)

3 4 5 6 7 8 9 10 11 12 13

150-774 150-911 150-777 106-098 155-734 155-733 157-542 157-539 125-776 157-536 157-020

1 1 1 1 1 1 1 1 1 1 1

CYLINDER HEAD (3.0 X 1.50) LOCK RING (3.0) CYLINDER PISTON (3.0 X 1.50) FLG BOLT (3/4-NC X 2", GD8) O-RING (334 D90) BACKUP RING (334 D90) U-SEAL (1.500") WIPER SEAL (1.500") WEAR RING BACKUP RING (230 D90) O-RING (230 D90)

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

REMARKS

DESCRIPTION

149-682 149-804 149-731 151-049 150-299 150-431 151-054 152-004 150-434 151-179 152-068 153-038 151-086 152-008 153-003 151-136 152-014 153-027 151-029 150-284 150-416 151-043 150-293 150-426 151-034 150-288 150-419 151-117 152-054 150-669

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

.

SEE FOOTNOTE 3

NOT SHOWN:

259-040 259-237 259-065 259-066 259-188

U-SEAL INSTALLER (1.5" - UP) ROD WIPER INSTALLER (1.5") PISTON SEAL INSTALLER (3") PISTON INSTALLER (3") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. REF. #1 & #2 ARE SPECIFIC TO EACH CYLINDER, REF. #3 THRU #13 ARE COMMON FOR ALL THE ABOVE LISTED CYLINDERS. 2. SEAL REPAIR KIT P/N: 190-167 3. APPLY LOCTITE 277 OR EQIVALENT, TORQUE TO 290-325 FT-LBS NOTE:

02

ID0015860

70

NOTES:

ID0134963

71

ACCESSORIES

72

AUGER

H314, H514, H515, H813, H853, H553 19

9

3

15 11

5 17

4

14 18

1 7 13

2

1 6

6 18

1

14

13 12

1

17

OPTION

2 15

16

10

8

08

ID0025107

73

AUGER

H314, H514, H515, H813, H853, H553 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

QTY

106-685 8 106-632 4 105-391 AR 105-953 AR 115-001 AR 125-620 2 142-031 1 142-038 1 145-071 1 145-109 1 145-110 1 145-244 1 145-245 1 145-290 2 145-298 2 143-021 2 184-189 2 184-188 1 106-594 4 184-076 4 145-070 1

NOT SHOWN: 181-831

1

DESCRIPTION

LOCKNUT (M12-1.75, PRV TRQ, 1O.9) FLG LK SCR (M12-1.75 X 35mm,SER) BOLT (3/4-NC X 4-1/2") LOCKNUT (3/4-NC) ZERK (02N) FLANGE BEARING (1.750", 4-BLT) AUGER SPROCKET (2.000" A14) AUGER SPROCKET (3.067" B10) LEFT AUGER RIGHT AUGER LEFT AUGER DOUBLE AUGER SHAFT SINGLE AUGER SHAFT BEARING PLATE AUGER BEARING PLATE ZERK GUARD SPACER (1.6") SPACER (2.9") SCREW (M12-1.75 X 60mm) GUARD BUSHING (.562") RIGHT AUGER

REPLACEMENT SLEEVE (6.000")

REMARKS

2P 3P LONG, SEE FOOTNOTES 2 & 3 SHORT, SEE FOOTNOTES 2 & 3 SHORT, SEE FOOTNOTES 2 & 3 SEE FOOTNOTE 2 2P 3P

SEE FOOTNOTE 2

LONG, SEE FOOTNOTE 2 & 3

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1-THE REPLACEMENT SLEEVE IS USED WHEN A DOUBLE AUGER SHAFT IS USED AS A SINGLE AUGER SET-UP. 2-TO BE USED WHEN OPERATING ATTACHMENT IN THE FULL SIDE POSITION, WITH THE SINGLE AUGER. 3-TO BE USED WHEN OPERATING ATTACHMENT IN MID POSITION, WITH LARGER BOOMS.

NOTE:

08

ID0025107

74

ROLLER BOOM 2P

HIGH HEADSHAFT H300/H313/H400/M500/H552/H514/H515/H553

12

3 1 12

7 6

11 10

4 9

2 9 5 8 11

ID0025105

75

ROLLER BOOM 2P

HIGH HEADSHAFT H300/H313/H400/M500/H552/H514/H515/H553 REF PART NO. NUMBER

QTY

141-491 143-050 143-060 143-051 143-061 141-488 142-751 151-053 180-448 115-003 115-165 125-209 115-165 115-019 105-313 180-062 115-276 159-093 115-001

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

1 1 1 1 1 1

1 1 1 1 2 1 1 2

DESCRIPTION

REMARKS

BOOM ASSEMBLY 42" LT ROLLER BOOM (2.000"P) 48" LT ROLLER BOOM (2.000"P) 3' BOOM (2.000"P, 47.21") BOOM (59.21") 2P-5FT BOOM LT ROLLER (2.000"P, 14.5") CYL (1.5" X 1.5" X 8.375") IDLER SHAFT (1.25" X 3.50") ZERK (1/4-NF, STR) PLUG (08N, SOC) TAPERED BEARING/RACE (1.250") PLUG (08N, SOC) ZERK (02N) IDLER NUT (1-1/4-NF) DIRT SHIELD REDUCER (16N-08NF) RELIEF VALVE (5/8-NF, 02N) ZERK (02N)

INCL REF NO.'S 1 THRU 12, USES 108 P INCL REF NO.'S 1 THRU 12, USES 84 P INCL REF NO.'S 1 THRU 12, USES 96 P

INCL'S REF NO. 5 AND 9

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. REFER TO REPLACEMENT DIAGRAM 052-519

NOTE:

11

ID0025105

76

ROLLER BOOM 3P

H515/H516/H553/H813/H853

2 3

1 2 12 7

15

9

11

19

10

5

2 14

13 8

6 15 4

4

16

16

8

5

13

18 17

19 9

02

ID0273651

77

ROLLER BOOM 3P

H515/H516/H553/H813/H853 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

QTY

143-120 143-130 143-358 140-1225 190-183 143-102 1 143-101 1 143-347 1 140-1210 1 115-001 3 151-053 1 115-470 2 125-216 2 110-220 AR 115-019 1 145-589 2 155-852 2 115-151 1 159-093 1 180-441 1 184-067 2 105-377 1 115-152 2 125-265 2 142-756 1 181-697 1 181-699 2

DESCRIPTION

REMARKS

LTR WEAR BAR BOOM (36" 3P) LTR WEAR BAR BOOM (48" 3P) LTR NON-WEAR BAR BOOM (48" 3P) LTR WEAR BAR BOOM (60" 3P) BEARING/SEAL REPAIR KIT BOOM 3P 3' BOOM (3P, 4') BOOM (3P, 4') 3P 5FT BOOM ZERK (O2N) CYL (1.5" X 1.5" X 8.375") INTERNAL SNAP RING (3.250") TAPERED RACE (3.265") MACH BUSHING (1-1/2", 14GA) ZERK (02N) SPACER EXTERNAL SEAL (2.250") REDUCER (16N-12NF) RELIEF VALVE (5/8-NF, 02N) IDLER SHAFT (1.500" X 4.375") SEAL SPACER JAM NUT (1-1/2-NF) PLUG (12N, SQ FM) TAPERED BEARING (1.500") LT ROLLER (3.067"C17.2") BEARING SPACER SEAL SLEEVE

INCL REF NO.'S 1 - 19, USES 52 P INCL REF NO.'S 1 - 19, USES 62 P INCL REF NO.'S 1 - 7, AND 9 - 19, USES 62 P INCL REF NO.'S 1 - 19, USES 72 P, SEE FOOTNOTE 1 INCL REF NO.'S 4, 5, 8, 9, 16, 18, & 19

NON-WEAR BAR SEE FOOTNOTE 1

DO NOT INSTALL ON THE 143-358 BOOM

NOT SHOWN:

FOOTNOTES:

1. THE H515, H516, H553, H813, AND H853 UNITS USE THE 5' BOOM, 140-1210, (ASSEMBLY 140-1225). PREVIOUS UNITS USE THE 5' BOOM, 143-370, (ASSEMBLY 143-375).

NOTE:

02

ID0273651

78

79

80

BOOM

1 4

2

3

01

ID0138873

81

BOOM REF PART NO. NUMBER

1.

2.

3.

4.

140-124 140-125 140-330 140-126 140-129 140-765 140-766 140-758 140-751 105-367 105-419 140-114 140-267 140-121 140-115 140-120 140-328 140-116

QTY

2 2 1 2 1 2 1 1 1 2 2 1 2 1 1

DESCRIPTION

BOOM PARTS ASS'Y (42.8 2P) BOOM PARTS ASS'Y (58.8 2P) BOOM PARTS ASS'Y (70.9 2P) BOOM PARTS ASS'Y (83.0 2P) BOOM PARTS ASS'Y (83.0 3P) SLIDE AND STOP SLIDE AND STOP SIDE PLATE SLIDE AND STOP SLIDE PLATE LOCKNUT (1-NC) BOLT (1-NC X 4") BOOM (44") SIDE PLATE ROCK GUARD BOOM (60.5") SIDE PLATE BOOM (70-7/8") BOOM (83")

REMARKS

FOR 2" P FOR 3" P

WELD-ON WELD-ON WELD-ON

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0138873

82

TRENCH CLEANER

2

16 16

17

9 8

15 9

18

17 17 10

1 17

11

19 4 14 13

6

3

5 7

12

04

ID0012405

83

TRENCH CLEANER REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

1 CLEANER 1 CARRIAGE 1 LOWER CLEANER FLAP 1 LOWER CLEANER 1 BOLT PLATE 4 SCREW (M8-1.25 X 60MM) 1 SPOILS FLAP (5") 1 LOCKNUT (1/2-NC) 2 WASHER (1/2") 2 LOCKNUT (5/8-NC) 2 BOLT (5/8-NC X 3-1/2") 9 LOCKNUT (M8-1.25, NLK) 2 SCREW (M8-1.25 X 50MM) 3 SCREW (M8-1.25 X 35MM) 2 PIN 4 KLIP RING (1.250") 4 SPRING BUSHING (.500) 1 BOLT (1/2-NC X 7.00", GD5) 5 WASHER (5/16")

141-765 329-870 118-367 325-615 325-660 106-570 118-177 105-065 105-071 105-357 106-212 107-096 106-329 106-267 177-183 115-483 105-1031 105-1030 105-117

DESCRIPTION

REMARKS

118-374 (6") 118-375 (7") SEE FOOTNOTE 1

118-178 (6") 118-179 (7") SEE FOOTNOTE 1

NOT SHOWN:

104-055

TRENCH CLEANER KIT

INCL. REF #'S 1-20

FOOTNOTES:

1- KIT #'S 191-465 (5") 191-466 (6") 191-467 (7")

NOTE:

04

ID0012405

84

PERSONNEL RESTRAINT 2P

7

OPTION 6 2

4

8

5

1 8 3

03

ID0139700

85

PERSONNEL RESTRAINT 2P

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

QTY

105-386 2 106-480 2 106-442 4 105-994 4 105-340 4 106-851 2 106-191 2 107-337 2 107-720 2 141-268 1 141-274 1 140-0008 1 141-354 1 141-350 1 141-276 1 141-371 1 141-373 1 141-277 1 141-372 1 141-374 1 141-280 1 106-949 4

DESCRIPTION

BOLT (5/8-NC X 4-1/2") SCREW (M16-2.00 X 110mm, 10.9) FLG LOCKNUT (M16-2.00, PRV TRQ) FLG LOCKNUT (5/8-NC) FLG LOCKNUT (3/4-NC) LOCKNUT (M18-2.5) BOLT (5/8-NC X 6", GD8) SCREW (M16-2.00 X 150mm, 10.9) SCREW (M18-2.5 X 160mm, 10.9) RESTRAINT BAR (46", 2P) RESTRAINT BAR (56", 2P) RESTRAINT BAR (60", 2P) RESTRAINT BAR (69", 2P) RESTRAINT BAR (80.5", 2P) LEFT MOUNT BRACKET LEFT MOUNT BRACKET (12") LEFT MOUNT BRACKET (16") RIGHT MOUNT BRACKET RIGHT MOUNT BRACKET (12") RIGHT MOUNT BRACKET (16") SUPPORT SPACER WASHER (3/4", HARDENED)

REMARKS

H313, H314, H514 M552 LOWER MOUNT BRACKET ONLY; TORQUE TO 650 FT-LBS H514 LOWER MOUNTING BOLTS H313, H314 H514, SEE FOOTNOTE 2 ROLLER BOOM ROLLER BOOM (FOR 3' AND 44" BOOM) ROLLER BOOM (FOR 4' BOOM) STANDARD BOOM "& 5'-50K ROLLER BOOM" STANDARD BOOM (FOR 5' BOOM) 3610 3610 3610 3610 SEE FOOTNOTE 1 H514, SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. WHEN H312 OR H314 ATTACHMENT IS USED IN AN OFFSET POSITION THE RIGHT MOINT BRACKET WILL BE REPLACED BY REF. NO. 7 (41-280) SUPPORT SPACER 2. EARLY PRODUCTION UNITS USED 107-688 WITH TWO HARDENED WASHERS. CURRENT PRODUCTION UNITS USE 107-720 WITH FOUR HARDENED WASHERS

NOTE:

03

ID0139700

86

PERSONNEL RESTRAINT 3P

10 9

8 5

2 7

1 6 4

A

3

809-407

87

PERSONNEL RESTRAINT 3P

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10

106-633 106-356 106-949 107-720 106-851 323-652 323-653 141-040 141-041 141-043

QTY

4 4 2 2 2 1 1 1 1 1

DESCRIPTION

BOLT (M20-2.50 X 130MM) FLG NUT (M20-2.50, 10.9) WASHER (3/4", HARDENED) SCREW (M18-2.5 X 160MM, 10.9) LOCKNUT (M18-2.5) LEFT RESTRAINT BRACKET (3P) RIGHT RESTRAINT BRACKET (3P) RESTRAINT BAR (60.0", 3P) RESTRAINT BAR (68.0") 3P RESTRAINT BAR (81.0", 3P)

REMARKS

TORQUE TO 250 FT-LB

FOOTNOTES

NOTE:

A

809-407

88

TRENCH CLEANER 2P

17

16

12 6

14 19

1

9

5

2

6 13 15

3

20 4 3 8 10

18

11

3

7

04

ID0139175

89

TRENCH CLEANER 2P

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

QTY

190-2406 190-2604 105-065 3 105-071 2 183-179 4 105-279 2 105-386 2 106-191 2 106-480 2 105-994 4 105-340 2 106-442 4 106-851 2 106-191 2 105-464 2 107-337 2 107-720 2 115-503 8 115-602 2 115-1018 2 141-109 2 141-215 1 141-134 1 141-135 1 141-136 1 141-137 1 140-1357 1 140-1358 1 141-211 1 141-132 1 140-1361 1 140-1365 1 140-1352 1 140-1363 1 140-1369 1 140-1354 1 140-1356 1 141-276 1 141-371 1 141-373 1 141-277 1 141-372 1 141-374 1 141-280 3 106-949 4 105-884 2 115-0005 2

DESCRIPTION

MECH CLEANER CONV KIT (ROLLER BOOM) MECH CLEANER CONV KIT (STD BOOM) LOCKNUT (1/2-NC) WASHER (1/2") PIN CARRIAGE BOLT (1/2-NC X 3") BOLT (5/8-NC X 4-1/2") BOLT (5/8-NC X 6", GD8) SCREW (M16-2.0 X 110mm, 10.9) FLG LOCKNUT (5/8-NC) FLG LOCKNUT (3/4-NC) FLG LOCKNUT (M16-2.00,PRV TRQ) LOCKNUT (M18-2.5) BOLT (5/8-NC X 6", GD8) BOLT (3/4-NC X 7", GD8) SCREW (M16-2.00 X 150mm, 10.9) SCREW (M18-2.5 X 160mm, 10.9) KLIP RING (3/4") EXTENSION SPRING EXTENSION SPRING REAR LINK CLEANER SHOE 4" CLEANER SHOE 6" CLEANER SHOE 8" CLEANER SHOE 10" CLEANER SHOE 12" SHOE BEAM (LTS) SHOE BEAM (STD) FRONT LINK FRONT LINK 3' LOWER CLEANER BAR (2.000" P) 3' LOWER CLEANER BAR (2.000" P) 3' LOWER CLEANER BAR (2.000" P) 4' LOWER CLEANER BAR (2.000" P) 4' LOWER CLEANER BAR (2.000" P) 4' LOWER CLEANER BAR (2.000" P) 5' LOWER CLEANER BAR (2.000" P) LEFT MOUNT BRACKET LEFT MOUNT BRACKET (12") LEFT MOUNT BRACKET (16") RIGHT MOUNT BRACKET RIGHT MOUNT BRACKET (12") RIGHT MOUNT BRACKET (16") SUPPORT SPACER WASHER (3/4", HARDENED) WASHER (.531") EXTERNAL SNAP RING (0.500")

REMARKS

INCL REF NO'S 1-4,8-10,12,13, 19 & 20; SEE F/N 1 INCL REF NO'S 1-4,8-10,12,13, 19 & 20; SEE F/N 1

M552 H313, H314, H514 M552 LOWER MOUNT BRACKET ONLY; TORQUE TO 650 FT-LBS H313, H314, H514 (2) H514 LOWER MOUNTING BOLTS M552 H313, H314 H514, SEE FOOTNOTE 4 OLD STYLE; SEE FOOTNOTE 6 SEE FOOTNOTES 5 & 6

ROLLER BOOMS; SEE FOOTNOTE 6 STANDARD BOOMS; SEE FOOTNOTE 6 ROLLER BOOMS STANDARD BOOMS ROLLER BOOMS; SEE FOOTNOTES 3 & 6 ROLLER BOOMS; SEE FOOTNOTES 2 & 6 STANDARD BOOM; SEE FOOTNOTES 2 & 6 ROLLER BOOMS; SEE FOOTNOTES 3 & 6 ROLLER BOOMS; SEE FOOTNOTES 2 & 6 STANDARD BOOM; SEE FOOTNOTES 2 & 6 STANDARD BOOM; SEE FOOTNOTES 2 & 6 3610 3610 3610 3610 M552 H514, SEE FOOTNOTE 4 SEE FOOTNOTE 6 SEE FOOTNOTE 6

FOOTNOTES:

1. REFER TO INSTALLATION DIAGRAM 050-926 2. H311 BEGINS WITH S/N 8K0126; H411 BEGINS WITH S/N 3M0693; H313 3. H312, H412, H314, H514, H450, H552, M552 4. EARLY PRODUCTION UNITS USED 107-688 W/ TWO HARDENED WASHERS. CURRENT PRODUCTION UNITS USE 107-720 W/ FOUR HARDENED WASHERS 5. INSTALL SPRING 115-1018 SO THAT OPEN ENDS OF THE COILS ARE FACING IN TOWARDS THE CLEANER BAR AND SHOE BEAM. 6. IF REPLACING OLD SPRINGS, CLEANER BAR OR SHOE BEAM, USE NEW CLEANER BAR AND SHOE BEAM SHOWN ON THIS PAGE, & INSTALL TRENCH CLEANER SPRING KIT 190-2669.

NOTE:

04

ID0139175

90

TRENCH CLEANER 3P

17

9

17

5

6

7 8 4 13 16 2 18

9

3 12

1 10

12

15

14 11

08

ID0109686

91

TRENCH CLEANER 3P REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

100-129 105-047 105-052 105-118 105-320 105-338 183-057 181-216 105-502 110-128 116-033 116-034 116-035 116-036 140-952 141-661 141-052 143-148 141-348 141-053 143-147 141-353 141-351 140-975 140-976 140-977 180-573 140-955 141-662 180-559

QTY

6 6 6 2 2 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CLEANER SHOE & SLIDE KIT LOCKNUT (3/8-NC) BOLT (3/8-NC X 1-1/4") WASHER (3/8") BOLT (3/4-NV X 2-1/4") LOCKNUT (3/4-NC) SLIDE LOCK PIN ROLLER COTTER PIN (3/16" X 2") SPRING CLIP PIN (5/32" X 1") SHOE FACING (6") SHOE FACING (8") SHOE FACING (10") SHOE FACING (12") CLEANER SHOE CLEANER SHOE CLEANER SHOE (44") 3P, 3' CLEANER BAR 3P, 3' CLAENER BAR CLEANER BAR 3P, 4' CLEANER BAR 3P, 4' CLEANER BAR 3P, 5' CLEANER BAR SHOE FACING 8" SHOE FACING 10" SHOE FACING 12" PIN CLEANER SHOE SLIDE CLEANER SHOE SLIDE PULL OIN (1" X 4.625")

INCLUDES REF NO.'S 1-9 & 16-18. SEE FOOTNOTE 1

OBSOLETE FOR 3' ROLLER BOOM, SEE FOOTNOTE 3.

FOR 3' ROLLER BOOM, SEE FOOTNOTE 2, OBSOLETE FOR 3' STD BOOM, SEE FOOTNOTE 2.

FOR 4' ROLLER BOOM, SEE FOOTNOTE 3 & 5.

FOR 4' ROLLER BOOM, SEE FOOTNOTE 2.

FOR 4' STD BOOM, SEE FOOTNOTE 2.

SEE FOOTNOTE 4

OBSOLETE

NOT SHOWN:

FOOTNOTES:

1. REFER TO INSTALLATION DIAGRAM 050-066 2. H411 3. H412, H514, M552 4. FOR 5' STD BOOM, SEE FOOTNOTE 2; FOR 5' ROLLER BOOM, SEE FOOTNOTE 3 5. H552 NOTE: THE ONLY 3P BOOM THAT CAN BE MOUNTED ON THE H552 IS THE 4' LTR NON-WEARBAR BOOM (143-358) NOTE:

08

ID0109686

92

93

94

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 1

2

1

3

4 5 6 REPAIR PART# 131-115 138-228 1 131-135 0 138-218 0 135-1236 19 135-1233 16 135-964 10 135-912 3 135-950 5 105-043 28 105-066 10 105-002 12 105-076 20 105-065 70 105-111 0 135-913 0 135-914 0

01

131-116 1 0 0 19 18 4 3 2 26 8 12 8 72 20 5 0

131-117 1 0 0 18 18 16 2 2 16 20 8 8 72 8 2 3

CHAIN ASSEMBLIES 131-137 131-138 0 0 1 1 0 0 16 16 16 16 0 0 0 0 0 0 64 64 0 0 0 0 0 0 64 64 0 0 0 0 0 0

133-322 0 0 1 17 17 0 0 0 68 0 0 0 68 0 0 0

7

133-293 0 0 1 17 17 0 0 0 68 0 0 0 68 0 0 0

ID0446692

95

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 1 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7

1 1 1 1 1 1 1

131-115 131-116 131-117 131-137 131-138 133-322 133-293

DESCRIPTION

REMARKS

50K 2P DURA 54P 10.1" 50K 2P DURA 54P 12.1" 50K 2P DURA 54P 16" 50K 2P DURA 64P 5.1" 50K 2P DURA 64P 6.1" 50K 2P DURA 68P 5.1" 50K 2P DURA 68P 6.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-228 50K DIGGING CHAIN STD 2P (54P) 131-135 50K DIGGING CHAIN STD 2P (64P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 135-964 TOOTH SPACER (1/4") 135-912 TOOTH ADAPTER (8") 135-950 TOOTH ADAPTER (10") 105-043 BOLT (1/2-NC X 1-1/4") 105-066 BOLT (1/2-NC X 1-3/4") 105-002 BOLT (1/2-NC X 2 1/4") 105-076 BOLT (1/2-NC X 3") 105-065 LOCKNUT (1/2-NC) 105-111 BOLT (1/2-NC X 4") 135-913 TOOTH ADAPTER (12") 135-914 TOOTH ADAPTER (16") 105-275 BOLT (1/2-NC X 6")

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446692

96

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 2

1

4

6

5

01

REPAIR Part# 131-009 138-217 0 138-215 0 138-218 1 135-1236 21 135-1233 21 135-964 0 135-912 8 135-950 0 105-043 52 105-066 0 105-002 32 105-076 0 105-065 84 105-111 0 135-913 0

3

2

131-010 0 0 1 21 21 0 4 4 52 0 16 16 84 0 0

131-011 0 0 1 21 22 12 3 3 38 12 12 12 86 12 3

CHAIN ASSEMBLIES 133-324 133-290 131-008 0 0 0 1 1 1 0 0 0 18 18 22 18 18 24 0 0 12 0 0 3 0 0 4 72 72 40 0 0 12 0 0 12 0 0 16 72 72 94 0 0 12 0 0 3

7

133-358 1 0 1 20 20 0 0 0 80 0 0 0 80 0 0

8

133-359 1 0 1 20 20 0 0 0 80 0 0 0 80 0 0

ID0446728

97

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 2 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

131-009 131-010 131-011 133-324 133-290 131-008 133-358 133-359

DESCRIPTION

REMARKS

50K 2P DURA 68P 8.6" 50K 2P DURA 68P 10.25" 50K 2P DURA 68P 12.1" 50K 2P DURA 72P 5.1" 50K 2P DURA 72P 6.1" 50K 2P DURA 72P 12.1" 50K 2P DURA 80P 5.1" 50K 2P DURA 80P 6.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-217 50K DIGGING CHAIN STD 2P (12P) 138-215 50K DIGGING CHAIN STD 2P (72P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 135-964 TOOTH SPACER (1/4") 135-912 TOOTH ADAPTER (8") 135-950 TOOTH ADAPTER (10") 105-043 BOLT (1/2-NC X 1-1/4") 105-066 BOLT (1/2-NC X 1-3/4") 105-002 BOLT (1/2-NC X 2 1/4") 105-076 BOLT (1/2-NC X 3") 105-065 LOCKNUT (1/2-NC) 105-111 BOLT (1/2-NC X 4") 135-913 TOOTH ADAPTER (12")

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446728

98

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3

3 2

1

4

8

7 5

REPAIR Part# 131-012 138-217 1 135-1532 0 138-218 1 135-1236 25 135-1233 25 135-964 0 135-912 10 135-950 0 105-043 60 105-066 0 105-002 40 105-076 0 105-065 100 105-111 0 135-913 0

01

131-013 1 0 1 25 25 0 5 5 60 0 20 20 100 0 0

131-014 1 0 1 26 25 16 3 4 42 16 12 16 100 16 4

6

CHAIN ASSEMBLIES 133-356 133-325 131-015 0 0 0 1 1 1 0 0 0 21 21 26 21 21 26 0 0 0 0 0 10 0 0 0 84 84 64 0 0 0 0 0 40 0 0 0 84 84 104 0 0 0 0 0 0

131-016 0 1 0 26 26 0 5 5 64 0 20 20 104 0 0

131-017 0 1 0 27 26 16 3 4 46 16 12 16 106 16 4

ID0446855

99

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

131-012 131-013 131-014 133-356 133-325 131-015 131-016 131-017

DESCRIPTION

REMARKS

50K 2P DURA 80P 8.75" 50K 2P DURA 80P 10.1" 50K 2P DURA 80P 12.1" 50K 2P DURA 84P 5.1" 50K 2P DURA 84P 6.1" 50K 2P DURA 84P 8.75" 50K 2P DURA 84P 10" 50K 2P DURA 84P 12"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-217 50K DIGGING CHAIN STD 2P (12P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 135-964 TOOTH SPACER (1/4") 135-912 TOOTH ADAPTER (8") 135-950 TOOTH ADAPTER (10") 105-043 BOLT (1/2-NC X 1-1/4") 105-066 BOLT (1/2-NC X 1-3/4") 105-002 BOLT (1/2-NC X 2 1/4") 105-076 BOLT (1/2-NC X 3") 105-065 LOCKNUT (1/2-NC) 105-111 BOLT (1/2-NC X 4") 135-913 TOOTH ADAPTER (12")

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446855

100

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4

4

3 2 1

7 6 5

REPAIR Part# 133-330 138-219 1 138-215 1 138-216 0 135-1533 0 135-1532 0 138-218 0 135-1236 22 135-1233 22 105-043 88 105-065 88

01

133-294 1 1 0 0 0 0 22 22 88 88

133-360 0 0 1 0 0 1 23 23 92 92

CHAIN ASSEMBLIES 133-361 133-331 133-291 0 0 0 0 0 0 1 0 0 0 1 1 0 0 0 1 0 0 23 24 24 23 24 24 92 96 96 92 96 96

133-332 1 0 0 0 1 0 25 25 100 100

ID0446920

101

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7

1 1 1 1 1 1 1

133-330 133-294 133-360 133-361 133-331 133-291 133-332

DESCRIPTION

REMARKS

50K 2P DURA 88P 5.1" 50K 2P DURA 88P 6.1" 50K 2P DURA 92P 5.1" 50K 2P DURA 92P 6.1" 50K 2P DURA 96P 5.1" 50K 2P DURA 96P 6.1" 50K 2P DURA 100P 5.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-219 50K DIGGING CHAIN STD 2P (16P) 138-215 50K DIGGING CHAIN STD 2P (72P) 138-216 50K DIGGING CHAIN STD 2P (24P) 135-1533 50K DIGGING CHAIN STD 2P (96P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 105-043 BOLT (1/2-NC X 1-1/4") 105-065 LOCKNUT (1/2-NC)

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446920

102

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 5

4 3 1

2

8 7

5

REPAIR Part# 133-224 138-219 1 138-217 0 138-216 0 135-1533 0 135-1532 1 138-218 0 135-1236 25 135-1233 25 105-043 100 105-065 100

01

133-333 0 1 0 1 0 0 27 27 108 108

133-292 0 1 0 1 0 0 27 27 108 108

6

CHAIN ASSEMBLIES 133-295 133-264 133-336 1 0 0 0 0 0 0 2 1 1 0 1 0 0 0 0 1 0 28 29 30 28 29 30 112 116 120 112 116 120

133-268 0 0 1 1 0 0 30 30 120 120

ID0446942

103

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 5 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

133-224 133-333 133-292 133-291 133-295 133-364 133-336 133-268

DESCRIPTION

REMARKS

50K 2P DURA 100P 6.1" 50K 2P DURA 108P 5.1" 50K 2P DURA 108P 6.1" 50K 2P DURA 96P 6.1" 50K 2P DURA 112P 6.1" 50K 2P DURA 116P 5.1" 50K 2P DURA 120P 5.1" 50K 2P DURA 120P 6.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-219 50K DIGGING CHAIN STD 2P (16P) 138-217 50K DIGGING CHAIN STD 2P (12P) 138-216 50K DIGGING CHAIN STD 2P (24P) 135-1533 50K DIGGING CHAIN STD 2P (96P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 105-043 BOLT (1/2-NC X 1-1/4") 105-065 LOCKNUT (1/2-NC)

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446942

104

50K DURATOOTH/C2X ASB CHAINS 2P CHAIN ASSEMBLIES

1

2

REPAIR Part# 133-282 138-278 2 138-279 1 138-280 1 138-281 0 135-1236 17 135-1233 17 135-1237 0 135-1234 0 105-043 68 105-065 68

01

3

4 5

CHAIN ASSEMBLIES 133-299 135-1311 135-1308 135-1301 1 1 1 2 0 0 0 1 1 1 1 1 1 1 1 0 28 0 0 0 28 0 0 0 0 28 28 17 0 28 28 17 112 112 112 68 112 112 112 68

ID0447026

105

50K DURATOOTH/C2X ASB CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5

1 1 1 1 1

135-1301 133-282 133-299 135-1311 135-1308

DESCRIPTION

REMARKS

50K C2X ASB 68P 5.12" 50K DURA ASB 68P 5.1" 50K DURA ASB 112P 6.1" 50K ASB C2X 112P 5.1" 50K ASB C2X 112P 6.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-278 50K DIGGING CHAIN ASB 2P (16P) 138-279 50K DIGGING CHAIN ASB 2P (12P) 138-280 50K DIGGING CHAIN ASB 2P (24P) 138-281 50K DIGGING CHAIN ASB 2P (72P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 135-1237 DURATOOTH C2X, RIGHT 1/4" 50K 135-1234 DURATOOTH C2X, LEFT 1/4" 50K 105-043 BOLT (1/2-NC X 1-1/4") 105-065 LOCKNUT (1/2-NC)

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0447026

106

50K COMBO CHAINS 2P DIGGING CHAINS

1

3

2

4

5

6 REPAIR Part# 131-140 131-135 1 138-218 0 138-217 0 135-1532 0 135-1533 0 138-223 0 138-228 0 135-1236 8 135-1233 8 136-236 5 136-237 5 136-240 3 136-241 3 136-036 0 136-037 0 136-040 0

01

136-041 135-912 135-950 135-913 136-237 135-952 136-043 105-076 105-111 105-136 105-002 105-110 105-065

0 0 0 0 0 48 16 16 16 32 0 0 64

131-415 0 1 0 0 0 0 0 8 8 5 5 4 4 0 0 0

131-412 0 1 1 0 0 0 0 10 10 6 6 4 4 0 0 0

0 0 0 0 0 52 16 16 20 32 0 0 68

0 0 0 0 0 60 20 20 20 40 0 0 80

CHAIN ASSEMBLIES 131-413 131-416 135-1483 131-404 0 0 0 0 0 0 0 1 0 0 0 1 1 0 0 0 0 1 0 0 0 0 1 0 0 0 1 0 11 12 9 10 11 12 9 10 5 7 0 0 5 7 0 0 5 5 9 0 5 5 9 0 0 0 0 6 0 0 0 6 0 0 0 4 0 0 0 0 0 64 20 20 20 44 0 0 84

0 0 0 0 0 72 24 24 24 48 0 0 96

0 3 3 3 3 24 18 18 0 36 12 12 78

4 0 0 0 0 60 20 20 20 40 0 0 80

8

7 131-405 0 0 0 1 0 0 0 11 11 0 0 0 0 5 5 5

131-408 0 0 0 0 1 0 0 12 12 0 0 0 0 7 7 5

5 0 0 0 0 64 20 20 20 44 0 0 84

5 0 0 0 0 72 24 24 24 48 0 0 96

9

ID0447522

107

50K COMBO CHAINS 2P DIGGING CHAINS REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9

1 1 1 1 1 1 1 1 1

131-416 135-1483 131-404 131-405 131-408 131-140 131-415 131-412 131-413

DESCRIPTION

50K 2P DURA/SHK B 96P 6.0 50K 2P CMB DURA/SHK B 60P 12" 50K 2P CMB DURA/ALG 80P 6.0 50K 2P CMB DURA/ALG 84P 6.0 50K 2P CMB DURA/ALG 96P 6.0 50K 2P CMB DURA/SHK B 64P 6.0" 50K 2P CMB DURA/SHK B 68P 6.0" 50K 2P CMB DURA/SHK B 80P 6.0" 50K 2P DURA/SHK B 84P 6.0"

REMARKS

SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

131-135 50K DIGGING CHAIN STD 2P (64P) 138-218 50K DIGGING CHAIN STD 2P (68P) 138-217 50K DIGGING CHAIN STD 2P (12P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 135-1533 50K DIGGING CHAIN STD 2P (96P) 138-223 50K DIGGING CHAIN STD 2P (4P) 138-228 50K DIGGING CHAIN STD 2P (54P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 136-236 50K LEFT INSIDE BOLT-ON SHARK ADAPTER 136-237 50K RIGHT INSIDE BOLT-ON SHARK ADAPTER 136-240 50K LEFT OUTSIDE WIDE BOLT-ON SHARK ADAP 136-241 50K RIGHT OUTSIDE WIDE BOLT-ON SHARK ADAP 136-036 50K CAST BIT ADAPTER, R.O. 136-037 50K CAST BIT ADAPTER, L.O. 136-040 50K CAST BIT ADPTR #10POS R.O. 136-041 50K CAST BIT ADPTR #10POS L.O. 135-912 TOOTH ADAPTER (8") 135-950 TOOTH ADAPTER (10") 135-913 TOOTH ADAPTER (12") 136-237 50K RIGHT INSIDE BOLT-ON SHARK ADAPTER 135-952 CHAIN SPACER (1.750") 136-043 SPACER 105-076 BOLT (1/2-NC X 3") 105-111 BOLT (1/2-NC X 4") 105-136 BOLT (1/2-NC X 3-1/2", GD8) 105-002 BOLT (1/2-NC X 2 1/4") 105-110 BOLT (1/2-NC X 4.5") 105-065 LOCKNUT (1/2-NC) FOOTNOTES:

USES 136-112 INSERT BITS

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0447522

108

50K ALLIGATOR & SHARK CHAINS 2P CHAIN ASSEMBLIES

1

2

5

4

3

6

01

REPAIR Part# 135-336 138-218 1 138-215 0 138-217 0 135-1532 0 135-1533 0 136-036 10 136-037 16 136-038 4 136-039 4 136-040 4 136-041 4 136-236 0 136-237 0 136-238 0 136-239 0 136-240 0 136-241 0 135-952 44 136-043 24 105-076 24 105-110 16 105-111 28 105-065 68

135-335 0 1 0 0 0 14 14 4 4 4 4 0 0 0 0 0 0 48 24 24 16 32 72

138-230 1 0 1 0 0 16 16 4 4 4 4 0 0 0 0 0 0 48 32 32 16 32 80

8

7

CHAIN ASSEMBLIES 135-337 138-225 132-302 0 0 1 0 0 0 0 0 0 1 0 0 0 1 0 17 19 0 17 19 0 4 5 0 4 5 0 4 5 0 4 5 0 0 0 13 0 0 13 0 0 4 0 0 4 0 0 4 0 0 4 52 60 44 32 36 24 32 36 24 16 20 16 36 40 28 84 96 68

132-301 0 1 0 0 0 0 0 0 0 0 0 14 14 4 4 4 4 48 24 24 16 32 72

132-303 0 0 0 1 0 0 0 0 0 0 0 17 17 4 4 4 4 52 32 32 16 36 84

ID0447762

109

50K ALLIGATOR & SHARK CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-336 135-335 138-230 135-337 138-225 132-302 132-301 132-303

DESCRIPTION

50K 2P ALG B-O 68P 5.250 50K 2P ALG 72P 5.2 "NS" 50K 2P ALG 80P 5.25" 50K 2P ALG 84P 5.3" 50K 2P ALG 96P 5.3 50K 2P SHK B-O 68P 5.3 50K 2P B-O SHK 72P 5.5" 50K 2P SHK B-O 84P 5.3"

REMARKS

SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-218 50K DIGGING CHAIN STD 2P (68P) 138-215 50K DIGGING CHAIN STD 2P (72P) 138-217 50K DIGGING CHAIN STD 2P (12P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 135-1533 50K DIGGING CHAIN STD 2P (96P) 136-036 50K CAST BIT ADAPTER, R.O. 136-037 50K CAST BIT ADAPTER, L.O. 136-038 50K CAST BIT ADPTR #9 POS L.O. 136-039 50K CAST BIT ADPTR #9 POS R.O. 136-040 50K CAST BIT ADPTR #10POS R.O. 136-041 50K CAST BIT ADPTR #10POS L.O. 136-236 50K LEFT INSIDE BOLT-ON SHARK ADAPTER 136-237 50K RIGHT INSIDE BOLT-ON SHARK ADAPTER 136-238 50K RT OUTSIDE BOLT-ON SHARK ADPTER 136-239 50K LT OUTSIDE BOLT-ON SHARK ADPTER 136-240 50K LEFT OUTSIDE WIDE BOLT-ON SHARK ADAP 136-241 50K RIGHT OUTSIDE WIDE BOLT-ON SHARK ADAP 135-952 CHAIN SPACER (1.750") 136-043 SPACER 105-076 BOLT (1/2-NC X 3") 105-110 BOLT (1/2-NC X 4.5") 105-111 BOLT (1/2-NC X 4") 105-065 LOCKNUT (1/2-NC)

FOOTNOTES:

USES 136-112 INSERT BITS

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0447762

110

50K WELDED ALG/ SHARK II CHAINS 2P CHAIN ASSEMBLIES

3

2

1

4 5 6 7 8

01

ID0488231

111

50K WELDED ALG/ SHARK II CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

131-050 131-096 131-097 131-175 131-171 131-172 131-173 131-174

DESCRIPTION

REMARKS

50K 2P ALG W/O 80P 6.0 50K 2P ALG W/O 84P 6.0 50K 2P ALG W/O 96P 6.0 50K 2P SHK II W-O 54P 6.0 50K 2P SHK II W-O 68P 6.0 50K 2P SHK II W-O 80P 6.0 50K 2P SHK II W-O 84P 6.0 50K 2P SHK II W-O 96P 6.0

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0488231

112

DIGGING CHAIN 3.067" P - 70,000 LB

8 10 7

6

9

4 5

15

12

1 13 3 14

11

2 6

04

ID0093092

113

DIGGING CHAIN 3.067" P - 70,000 LB REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

QTY

DESCRIPTION

105-372 AR LOCKNUT (3/4-NC) 105-499 AR BOLT (3/4-NC X 1-3/4") 105-466 AR BOLT (3/4-NC X 2-1/2") 105-339 AR BOLT (3/4-NC X 2-3/4") 105-321 AR BOLT (3/4-NC X 3") 105-365 AR BOLT (3/4-NC X 4") 106-086 AR BOLT (3/4-NC X 4-1/4") 105-383 AR BOLT (3/4-NC X 6") 135-402 AR LOCK KEY (5/16" X 3/4") 135-910 AR LEFT CUP TOOTH 135-1239 AR DURATOOTH, LEFT 3/8 70-110K 135-1240 AR DURATOOTH C2X, LEFT 3/8 70-110K 135-911 AR RIGHT CUP TOOTH 135-1242 AR DURATOOTH, RIGHT 3/8 70-110K 135-1243 AR DURATOOTH C2X, RIGHT 3/8 70-110K 135-921 AR TOOTH SPACER (3/8") 136-070 AR TOOTH SPACER (1/2") 135-960 AR SPACER (1/8") 135-961 AR CHAIN SPACER (.8") 135-962 AR CHAIN SPACER (1.9") 135-979 AR CHAIN SPACER (2.16") 136-109 AR LEFT TOUGH TOOTH 90 136-110 AR RIGHT TOUGH TOOTH 90 136-120 AR TOOTH ADAPTER 136-071 AR TOOTH ADAPTER 137-501 AR DIG CHAIN PIN (70K) 138-503 AR ROLLER LINK 138-504 AR TOOTH SIDEBAR 138-505 AR TOOTH SIDEBAR 138-701 AR 2'-2" CHAIN (8 P) 138-702 AR 4'-2" CHAIN (16 P) 138-703 AR 13'-3" CHAIN (52 P) 138-707 AR 14'-4" CHAIN (56 P) 138-704 AR 15'-10" CHAIN (62 P)

REMARKS

OBSOLETE OBSOLETE

OBSOLETE OBSOLETE FOR 10" & 12" WIDTHS. NOT SHOWN KEY SIDE HEAD SIDE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH

NOT SHOWN:

259-140

CHAIN JAWS

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

04

ID0093092

114

DIGGING CHAIN 3.067" P - 70,000 LB 4 PITCH SPACING - RAISED RIVET

8

5

10 1 7 6 9

6

4 2

13

15

14

3 12 11

06

ID0129159

115

DIGGING CHAIN 3.067" P - 70,000 LB 4 PITCH SPACING - RAISED RIVET REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

QTY

105-372 AR 105-499 AR 105-466 AR 105-339 AR 105-321 AR 105-365 AR 105-383 AR 135-402 AR 135-910 AR 135-1239 AR 135-1240 AR 135-911 AR 135-1242 AR 135-1243 AR 135-921 AR 136-070 AR 135-960 AR 135-961 AR 135-962 AR 136-109 AR 136-110 AR 136-120 AR 137-501 AR 135-1182 AR 138-506 AR 138-507 AR 138-509 AR 138-510 AR 138-511 AR 138-512 AR 138-706 AR

DESCRIPTION

LOCKNUT (3/4-NC) BOLT (3/4-NC X 1-3/4") BOLT (3/4-NC X 2-1/2") BOLT (3/4-NC X 2-3/4") BOLT (3/4-NC X 3") BOLT (3/4-NC X 4") BOLT (3/4-NC X 6") LOCK KEY (5/16" X 3/4") LEFT CUP TOOTH DURATOOTH LEFT 3/8" 70-110K DURATOOTH C2X LEFT 3/8" 70-110K RIGHT CUP TOOTH DURATOOTH RIGHT 3/8" 70-110K DURATOOTH C2X RIGHT 3/8" 70-110K SPACER (3/8") SPACER (1/2") SHIM (1/8") CHAIN SPACER (.80") CHAIN SPACER (1.90") LEFT TOUGH TOOTH 90 RIGHT TOUGH TOOTH 90 TOOTH ADAPTER (7.65") DIG CHAIN PIN (70K) 70K STD REPAIR STATION KIT PLAIN SIDEBAR PLAIN SIDEBAR 2'-1" CHAIN (8 P) 4'-1" CHAIN (16 P) 15'-10" CHAIN (62 P) 13'-3" CHAIN (52 P) 14'-4" CHAIN (56 P)

REMARKS

OBSOLETE

OBSOLETE

OBSOLETE OBSOLETE

OBSOLETE, KEY SIDE OBSOLETE, HEAD SIDE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH

NOT SHOWN:

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM,CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

06

ID0129159

116

117

118

PRM CHAIN ALGTR 3P70K2PS RR PR 2 PITCH SPACING-BOLT ON-RAISED RIVET 8 6 10

13 11

3

9

3

13 1

5

13

4

3 5

7 4 5

5 12

12 14

2 3 14

5

11

3 16

2

5

15

02

ID0093161

119

PRM CHAIN ALGTR 3P70K2PS RR PR 2 PITCH SPACING-BOLT ON-RAISED RIVET REF PART NO. NUMBER

QTY

DESCRIPTION

1. 105-322 AR BOLT (3/4-NC X 5-1/2") 2. 105-365 AR BOLT (3/4-NC X 4") 3. 105-372 AR LOCKNUT (3/4-NC) 4. 105-391 AR BOLT (3/4-NC X 4-1/2") 5. 135-1187 AR 70K PREMIUM REPAIR STATION KIT 6. 136-008 AR RETAINER RING 7. 139-701 AR 2'-1" CHAIN (8 P) 139-702 AR 4'-1" CHAIN (16 P) 139-707 AR 14'-6" CHAIN (56 P) 139-704 AR 16'-1" CHAIN (62 P) 8. 136-100 AR BIT (CARBIDE CAP) 136-101 AR BIT (CARBIDE INSERT) 136-102 AR HEAVY DUTY BIT (CARBIDE INSERT) 9. 135-973 AR BIT ADAPTER 10. 135-974 AR BIT ADAPTER 11. 135-975 AR BIT ADAPTER 12. 135-976 AR BIT ADAPTER 13. 135-979 AR CHAIN SPACER (2.156") 14. 135-980 AR CHAIN SPACER (1.405") 15. 137-501 AR DIG CHAIN PIN (70K) 16. 135-402 AR LOCK KEY (5/16" X 3/4")

REMARKS

USE WITH TWO (2) ADAPTERS ON OUTSIDE USE WITH ADAPTER ON INSIDE

LESS ADAPTERS LESS ADAPTERS LESS ADAPTERS LESS ADAPTERS INCL REF NO 17 INCL REF NO 17 INCL REF NO 17 LEFT OUTSIDE RIGHT OUTSIDE LEFT INSIDE AND RIGHT OUTSIDE RIGHT INSIDE AND LEFT OUTSIDE USED WITH ONE OR TWO ADAPTERS ON OUTSIDE USED WITH ONE ADAPTER INSIDE

NOT SHOWN:

259-001 259-002 259-150 259-140 135-957

BIT PULLER - HAMMER BIT PULLER - SLIDE HAMMER BIT PUNCH - SLIDE HAMMER CHAIN JAWS (1-1/8" DRIVE) BIT BLOCK

FOR REF NO.'S 9-12

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

02

ID0093161

120

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

121

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

122

NOTES:

ID0134963

123

MISCELLANEOUS

124

SAE Bolt and Nut Torque Value Chart Grade 5: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

12

16

8

11

20

27

5/16

25

34

15

20

45

60

3/8

40

54

25

34

75

100

7/16

65

90

40

55

125

170

1/2

100

135

60

80

190

260

9/16

150

200

90

125

270

370

5/8

200

270

120

165

370

500

3/4

350

475

210

285

650

880

7/8

560

760

340

460

1250

1425

1

840

1140

500

680

1580

2145

1-1/8

1030

1400

320

840

1950

3645

1-1/4

1460

1980

880

1195

2760

3475

Grade 8: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

14

19

10

14

24

33

5/16

30

40

18

25

50

70

3/8

55

73

35

50

90

125

7/16

85

115

50

70

140

190

1/2

130

175

80

110

220

300

9/16

190

260

110

150

310

420

5/8

260

355

160

245

430

585

3/4

450

610

270

365

750

1015

7/8

730

990

440

600

1210

1640

1

1090

1480

650

880

1320

2465

1-1/8

1550

2100

930

1260

2580

3500

1-1/4

2180

2955

1310

1780

3640

4935

*drilled and tapped

125

Metric Bolt and Cap Screw Torque Values Size

Class 4.8

Class 8.8 and 9.8

Class 10.9

Class 12.9

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

M6

4.8

3.5

6

4.5

9

6.5

11

8.5

13

9.5

17

12

15

11.5

19

14.5

M8

12

8.5

15

11

22

16

28

20

32

24

40

30

37

28

47

35

M10

23

17

29

21

43

32

55

40

63

47

80

60

75

55

95

70

M12

40

29

50

37

75

55

95

70

110

80

140

105

130

95

165

120

M14

63

47

80

60

120

88

150

110

175

130

225

165

205

150

260

190

M16

100

73

125

92

190

140

240

175

275

200

350

225

320

240

400

300

M18

135

100

175

125

260

195

330

250

375

275

475

350

440

325

560

410

M20

190

140

240

180

375

275

475

350

530

400

675

500

625

460

800

580

M22

260

190

330

250

510

375

650

475

725

540

925

675

850

625

1075

800

M24

330

250

425

310

650

475

825

600

925

675

1150

850

1075

800

1350

1000

M27

490

360

625

450

950

700

1200

875

1350

1000

1700

1250

1600

1150

2000

1500

M30

675

490

850

625

1600

950

1650

1200

1850

1350

2300

1700

2150

1600

2700

2000

M33

900

675

1150

850

1750

1300

2200

1650

2500

1850

3150

2350

2900

2150

3700

2750

M36

1150

850

1450

1075

2250

1650

2850

2100

3200

2350

4050

3000

3750

2750

4750

3500

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, these should only be tightened to strength of original.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Tighten plastic insert or crimped type steel locknuts to approximately 50% of dry torque indicated on chart.

Apply torque to the nut - not the bolt head. Tighten toothed or serrated type locknuts to full torque value.

LUBRICATED means coated with lubricant. DRY means plain or zinc plated without any type of lubricant.

126

Hydraulic Cylinder Bolt Torque Chart Bolt Size (inch)

Bolt Part No.

Cylinder Repair Kit Part No.

Torque (ft•lb)

Torque (N•m)

1/2

106-096

190-165

90-100

120-135

5/8

106-097

190-166 & 190-169

180-200

245-270

3/4

106-098

190-167 & 190-170

290-325

395-440

7/8

106-122

190-172 & 190-174

410-640

550-625

1

106-145

190-175 & 190-189

630-700

855-950

1-1/8

106-146

190-177

770-850

1045-1170

As a general rule: •

1/2-inch bolts are used in cylinders with 1-inch rods

•

5/8-inch bolts are used in cylinders with 1 1/4-inch rods

•

3/4-inch bolts are used in cylinders with 1 1/2-inch rods

•

7/8-inch bolts are used in cylinders with 1 3/4-inch rods

•

1-inch bolts are used in cylinders with 2-inch rods (one with 1 3/4-inch)

•

1-1/8-inch bolts are used in cylinders with 2-1/4-inch rods

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and torque to value shown on chart.

SAE & ORS Hydraulic Fitting Replacement O-Ring Chart Fraction Size

Dash Size

SAE (Port Seal O-Ring)

ORS (Face Seal O-Ring)

Thread Size

O-Ring P/N

Thread Size

O-Ring P/N

1/16

1

NA

NA

NA

NA

1/8

2

5/16 - 24

NA

NA

NA

3/16

3

3/8 - 24

NA

NA

NA

1/4

4

7/16 - 20

155-760

9/16 - 18

157-037

5/16

5

1/2 - 20

NA

NA

NA

3/8

6

9/16 - 18

155-705

11/16 - 16

157-038

1/2

8

3/4 -16

155-706

13/16 - 16

157-039

5/8

10

7/8 - 14

155-707

1 - 14

157-040

3/4

12

1-1/16 - 12

155-709

1-3/16 - 12

157-017

7/8

14

1-3/16 - 12

155-747

NA

NA

1

16

1-5/16 - 12

155-748

1-7/16 - 12

155-714

1-1/4

20

1-5/8 - 12

155-702

1-11/16 - 12

NA

1-1/2

24

1-7/8 - 12

157-001

2 -12

NA

2

32

2-1/2 - 12

NA

NA

NA

2-1/2

40

3 - 12

NA

NA

NA

3

48

3-1/2 - 12

NA

NA

NA

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current CMW part numbered o-ring, or dash size does not occur in current CMW applications SAE = straight thread fitting that seals by sandwiching a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORS = o-ring face seal; a type of fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface

127

128

129

Parts Manual Change Request (Please print clearly)

Date: _______________________

Dealer No. (required): _____________________________

Your Name: _____________________________ Phone: _________________

Position: _____________________________

Fax: _________________

E-mail: __________________

Publication Information: Parts Manual No.: _____-_____

Model: __________

Illustration Part No.: Manual Page No.: 1. _____-_____ .......................................................... 1. __________ 2. _____-_____ .......................................................... 2. __________ 3. _____-_____ .......................................................... 3. __________ Nature of Change Request:

 Text

 Graphics

 Missing Information

Describe change requested (if possible, include copy of publication page with changes marked.): ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ Please fax completed form to Parts Manual Department (580) 572-3525 Thank you for taking the time to submit this request. We will contact you if further information is needed to process your request.

ID0135001

130

131

ID0040564

132

ID0135281