Ditch Witch H516 Parts Manual 053-2087 - PDF DOWNLOAD

H516

Parts Manual

Issue 5

053-2087

1

H516 ISSUE NO. 05PL-07/18 For Replacement Copy Order P/N 053-2087

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works.

Attachment for – RT55

This manual contains information concerning the following models: H516

Copyright 2010, 2011, 2012, 2016, 2018 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Jet Trac, Roto Witch, Subsite, Fluid Miser, Power Pipe, Super Witch, Pierce Arrow, Zahn, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication. However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration reference numbers. ♦ Have equipment model and serial number on hand to help ensure you get the right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 04

ID0128552

4

WARRANTY _________________________ DW WARRANTY Policy August, 2016

POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse, abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part

by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 05

ID0134872

5

CONTENTS______________________ Decals Decal Location ........................................... 8 Frame Components Attachment Frame ................................... 14 Auger ....................................................... 22 Headshaft & Sprocket .............................. 20 Personnel Restraints ................................ 26 Pivot & Outboard Pivot Support ............... 18 Slides ....................................................... 16 TDM Sensor ............................................. 24

Miscellaneous Bolt/Nut Torque Chart .............................. 94 Parts Manual Change Request ............... 99 Replacement O-Ring Chart ...................... 97 Warranty Registration ............................ 102

Hydraulics Cylinder – 2.5” x 1.5” x 24” ........................... 38 Cylinder – 3.5” x 2” x 12” .............................. 36 Drive Hydraulics ....................................... 32 Grease Cylinder ....................................... 40 Lift Hydraulics .......................................... 30 Slide Hydraulics ....................................... 34 Accessories Boom ....................................................... 50 Chain, 3.067” ............................... 82, 84, 86 Chain, 50K Alligator & Shark .................... 78 Chain, 50K Combo................................... 76 Chain, 50K Duratooth....................... 64 – 72 Chain, 50K Duratooth/C2X ASB............... 74 Chain, 50K Welded ALG/Shark II ............. 80 Chain, PRM Alligator ................................ 88 Personnel Restraint 2P ............................ 54 Personnel Restraint 3P ............................ 56 Roller Boom 2P ........................................ 44 Roller Boom 3P – Non-Wear Bar ................. 48 Roller Boom 3P ........................................ 46 Special Tool – Chain Jaws .......................... 90 Trench Cleaner 2P ................................... 58 Trench Cleaner 3P ................................... 60 Trench Cleaner Feed Tube ...................... 62 Trench Cleaner ........................................ 52

ID0252630

6

7

DECALS

8

DECAL LOCATION H516

13 2

3

5 2 1

14 4 10

11

3

5 1

03

2

ID0225808

9

DECAL LOCATION H516

12

12 8 8

6 6

6

8 6

7 8 9

7 6

03

ID0225808

10

DECAL LOCATION H516 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

270-4526 270-4525 270-6268 274-002 274-442 275-043 275-184 275-230 275-231 275-232 275-233 700-176 700-177 700-091 273-091 274-787

QTY

2 2 3 2 1 2 2 4 1 2 1 1 2 1 1

DESCRIPTION

DECAL KIT - H516 H516 MODEL ID H516 MODEL ID DANGER CHAIN & AUGER LIFT LOCATION CHAIN TENSION WARNING MOVING PARTS DANGER STRIPE 1.75" X 18" DANGER STRIPE 2.75" X 18" DANGER 1.75" X 18" DANGER 2.75" X 18" RAISE/LOWER DIGGING BOOM TRENCHER L/R SIDE SHIFT DANGER STRIPE 1.50” X 8” DIGGING ATTACHMENT CONTROL NOTICE LUBRICATION

REMARKS

(OLD STYLE) (NEW STYLE)

FOOTNOTES

03

ID0225808

11

12

NOTES:

ID0134963

13

FRAME COMPONENTS

14

ATTACHMENT FRAME H516

7 1

3 4 9

6

8

5

7

2

8

01

10

ID0229075

15

ATTACHMENT FRAME H516

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10

322-967 118-152 259-042 259-099 110-259 110-126 106-383 106-558 106-632 106-709

QTY

1 1 1 1 1 1 6 6 3 3

DESCRIPTION

CYLINDER COVER SPOILS FLAP PLUG WRENCH 1/2" DRIVE PLUG WRENCH - 3/8" DRIVE BOLT-ON CLAMP (.625") BOLT-ON CLAMP (1/2") FLG LK SCREW (M10-1.50 X 30MM) CLIP NUT (M10-1.50) FLG LK SCR (M12-1.75X35MM,SER) FLG LK NUT (M12-1.75)

REMARKS

USED ON 3" P ONLY USED ON 2" P AND 3" P USED ON 3" P ONLY USED ON 2" AND 3" P

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0229075

16

SLIDES

UPPER & LOWER H516

6

8

8

7 3 4

7

6

3 5

3

1

3

6

8 8

7

5 3

4 6 7 2

01

ID0229076

17

SLIDES

UPPER & LOWER H516 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 UPPER SLIDE 1 LOWER SLIDE FRAME 18 SLIDE BAR (PLASTIC) 18 SCREW (M12-1.75X40MM, CSK) 18 FLG LK NUT (M12-1.75) 17 SCREW (M16-2.00 X 55MM, 10.9) 17 WASHER (M16, HARDENED) 17 FLG LKNUT (M16-2.0,PRVTRQ10.9)

300-7314 300-7318 322-754 106-548 106-709 106-616 106-398 106-442

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0229076

18

PIVOT AND OUTBOARD PIVOT SUPPORT H516

29 25 32 30

26

31

21

22

24

23

19 28

27

29

22 21

9 10 1

20 16

14 8

15

14 20

6 5

9

7

12 4 2

6 13

01

17

7

12

10

11 3

ID0229074

19

PIVOT AND OUTBOARD PIVOT SUPPORT H516

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 20 21 22 23 24 25 26 27 28 29 30 31 32

1 PIVOT ASSEMBLY 1 BOOM STUB (24") 1 BOOM STUB (30.3") 1 ROLL PIN (1/2" X 3-1/2") 1 PIVOT CAP AR PIVOT CAP SHIM 4 SCREW (M16 X 60MM 10.9) 4 FLG LKNUT (M16-2.0,PRVTRQ10.9) 4 SCREW (M18-2.5 X 150MM 10.9) 7 WASHER (3/4", HARDENED) 3 LOCKNUT (M18-2.5) 2 GROOVED PIVOT SLEEVE 1 PIVOT SLEEVE 3 ZERK (02N90) 1 OUTER PIVOT TUBE 1 OUTER SPOILS CAP 1 C-RING 1 SCREW (M20-2.50 X 40MM) 9 FLG LOCKNUT (1/2-NC, GD8) 9 BOLT (1/2-NC X 2-1/4", GD8) 9 WASHER (1/2") 1 BOLT (1-NC X 5", GD8) 1 WASHER (1-1/32") 1 CYL (3.5 X 2.00 X 12.0) 1 PIN 1 FLG LK NUT (M12-1.75) 1 CARRIAGE BOLT(M12-1.75 X 30MM) 2 COMPOSITION BUSHING (2") 1 TAPERED PIN (2.000" X 8.500") 1 TAPERED INSERT (2") 1 WASHER (M20, HARDENED)

300-7263 300-7311 300-7310 105-1260 322-759 322-952 107-598 106-442 107-688 106-949 106-851 125-644 145-980 115-002 300-7307 300-7308 300-7309 106-344 106-198 106-575 105-071 105-368 106-637 151-047 323-158 106-709 107-683 125-754 179-378 184-064 106-399

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 3"P EXCEPT FOR 5' LTR BOOM 2"P AND 5' LTR BOOM SEE FOOTNOTE 1

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. TIGHTEN LEFT SIDE (PRIMARY) PIVOT HARDWARE BEFORE OUTER PIVOT TUBE HARDWARE.

NOTE:

01

ID0229074

20

HEADSHAFT AND SPROCKET H516

12

10 4

13

6

1 5

2 18

16 17

18

19 11

3 15 8 7

01

14

9

ID0229077

21

HEADSHAFT AND SPROCKET H516

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

1 HEADSHAFT 1 INTERNAL SEAL 1 BEARING (SPHERICAL ROLLER 60MM) 1 SPROCKET HUB 3" PITCH 1 WASHER (3/4") 1 SCREW (M20-2.50 X 40MM) 1 DRIVE HUB 2" PITCH 1 BACKING RING 2 SPROCKET HALF, 14T 2P 1 HEADSHAFT SPROCKET 2 SPROCKET (2.000"A12, SPLIT) 16 CAM WASHER (5/8") 8 SCREW (M16-2.00 X 40MM, 10.9) 16 CAM WASHER (1/2") 8 SCREW (M12-1.75 X 45 MM) 1 BALL BEARING (2.362") 1 INTERNAL SNAP RING (4.331") 2 EXTERNAL SNAP RING (2.375") 1 ZERK (02N)

165-531 157-583 125-1007 178-099 105-423 106-344 178-914 140-696 142-044 142-009 142-127 105-497 106-478 105-159 105-761 125-073 115-488 115-489 115-001

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 USED WITH 14T SPROCKET SEE FOOTNOTE 3

SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1. USE LOCTITE 680 WHEN INSTALLING SCREW (106-344) IN THE END OF THE HEADSHAFT. 2. USE LOCTITE 242 OR EQUIVALENT WHEN INSTALLINGS SCREWS 106-478 OR 105-761.

3. DISHED SIDE OF SPROCKET FITS AGAINST DRIVE HUB.

NOTE:

1. ITEMS 4 AND 10, 12 & 13 ARE INCLUDED IN ASSEMBLY KIT (3P) 190-1445. ITEMS 7, 14, 15 & 8 ARE INCLUDED IN ASSEMBLY KIT (2P) 190-1444.

01

ID0229077

22

AUGER H516

2

6

1

7 20 10

23

4 7

14

8

13

21

5 15 23 20

24

16

17

25

19 22

9

14

3

18

11

9 21

12

01

ID0229678

23

AUGER H516

REF PART NO. NUMBER

QTY

1 142-127 2 142-031 3 142-038 4 300-7325 5 300-8741 6 107-688 7 106-949 8 106-851 9 145-110 10 145-109 11 145-070 12 145-071 13 145-244 14 184-189 15 125-620 16 184-076 17 143-021 18 106-632 19 106-594 20 105-391 21 105-953 22 106-685 23 115-001 24 145-245 25 184-188

2 1 1 1 1 4 8 4 1 1 1 1 1 2 2 2 2 3 4 2 2 5 2 1 1

DESCRIPTION

SPROCKET (2.000"A12, SPLIT) AUGER SPROCKET (2.000" A14) 10T 3.067P AUGER SPROCKET AUGER MOUNT AUGER MOUNT 3"P SCREW (M18-2.5 X 150MM 10.9) WASHER (3/4", HARDENED) LOCKNUT (M18-2.5) LEFT AUGER RIGHT AUGER RIGHT AUGER LEFT AUGER DOUBLE AUGER SHAFT SPACER FLANGE BEARING (1.750", 4-BLT) GUARD BUSHING (.562") ZERK GUARD FLG LK SCR (M12-1.75X35MM,SER) SCREW (M12-1.75 X 60MM) BOLT (3/4-NC X 4.5") LOCKNUT (3/4-NC) LOCKNUT(M12-1.75,PRV TRQ,10.9) ZERK (02N) SINGLE AUGER SHAFT SPACER

REMARKS

2P 3P 2P 3P

SHORT, SEE FOOTNOTE 2 & 3 SHORT, SEE FOOTNOTE 2 & 3 LONG, SEE FOOTNOTE 2 & 3 LONG, SEE FOOTNOTE 2 & 3

OPTION, SEE FOOTNOTE 2 OPTION, SEE FOOTNOTE 2

NOT SHOWN:

181-831

1 REPLACEMENT SLEEVE (6.000")

SEE FOOTNOTE 1

FOOTNOTES:

1. THE REPLACEMENT SLEEVE IS USED TO REPLACE AN AUGER WHEN MOUNTING A SINGLE AUGER SHAFT. 2. TO BE USED WHEN OPERATING ATTACHMENT IN THE FULL SIDE POSITION, WITH THE SINGLE AUGER. 3. TO BE USED WHEN OPERATING ATTACHMENT IN MID POSITION, WITH LARGER BOOMS.

NOTE:

01

ID0229678

24

TDM SENSOR H516

2 1 2 1

01

ID0229104

25

TDM SENSOR H516

REF PART NO. NUMBER

1 2

220-556 107-895

QTY

DESCRIPTION

REMARKS

2 TDM BOOM SENSOR 4 SCREW #10-24 X 2 1/4" SOC HEAD

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0229104

26

PERSONNEL RESTRAINTS H516 2P & 3P

13 6

4

2

7 3

7

8

11 1

12

14

15

5

10

8 9

02

ID0229684

27

PERSONNEL RESTRAINTS H516 2P & 3P

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

300-7329 300-7321 300-7320 106-949 106-851 107-688 105-357 105-970 300-9068 300-9069 106-399 107-927 106-356 141-040 141-268

QTY

DESCRIPTION

1 1 1 8 4 4 6 6 1 1 4 4 4 1 1

RESTRAINT MOUNT RIGHT RESTRAINT BRACKET LEFT RESTRAINT BRACKET WASHER (3/4", HARDENED) LOCKNUT (M18-2.5) SCREW (M18-2.5 X 150MM 10.9) LOCKNUT (5/8-NC) FLG BOLT (5/8-NC X 1-3/4,GD8) LEFT RESTRAINT BRACKET RIGHT RESTRAINT BRACKET WASHER (M20, HARDENED) SCREW (M20-2.50 X 160MM) FLG NUT (M20-2.50, 10.9) RESTRAINT BAR (54.0", 3P) RESTRAINT BAR (46", 2P)

1 1 1 1 1

RESTRAINT BAR (68.0") 3P RESTRAINT BAR (81.0") 3P RESTRAINT BAR (56.0") 2P RESTRAINT BAR (69.0") 2P RESTRAINT BAR (80.5") 2P

REMARKS

3P 3P

2P 2P TORQUE TO 250 ft/lbs SEE NOT SHOWN SECTION SEE NOT SHOWN SECTION

NOT SHOWN:

141-041 141-043 141-274 141-354 141-350

FOOTNOTES:

NOTE:

02

ID0229684

28

NOTES:

ID0134963

29

HYDRAULICS

30

LIFT HYDRAULICS H515

14 13

1 11

10 12 6

5

7 4

2 8

3

8

9

06

ID0014764

31

LIFT HYDRAULICS H515

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14

1 1 1 1 1 1 1 2 1 1 1 1 1 1

159-631 153-799 153-800 151-047 154-322 154-261 117-323 154-276 117-189 154-279 154-264 154-374 159-651 116-941

DESCRIPTION

HYD CONTROL VALVE (2-SPOOL) HOSE (04OFX90S-38"-5000) HOSE (04OFX90S-42"-5000) CYL (3.5 X 2.00 X 12.0) CONNECTOR (08O-10S90) CONNECTOR (04O-08S) ABRASION SLEEVE (1.25" X 37") CONNECTOR (04O-08S90) ABRASION SLEEVE (1.25" X 44") CONNECTOR (08O-10S) CONNECTOR (08O-10S45) CONN (04O-08S, .062 ORF) HYD CONTROL VALVE (1-SPOOL) HANDLE (3/8-NC, GREEN)

REMARKS

USED FOR HYDRAULIC SLIDE OPTION

POWER BEYOND

RETURN PRESSURE USED FOR MANUAL SLIDE OPTION ONE HANDLE USED ON EITHER VALVE

NOT SHOWN:

FOOTNOTES:

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

06

ID0014764

32

DRIVE HYDRAULICS H515/H813

10

12

14

13

6

9

16 7

8

11

17 4

5 15 1 3

08

2

ID0015388

33

DRIVE HYDRAULICS H515/H813 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

4 1 1 4 1 1 2 1 1 1 2 1 1 1 1 2 1

106-398 159-563 159-590 106-340 154-283 154-396 154-371 154-290 153-249 115-789 110-220 154-885 154-878 154-677 159-562 514-242 149-130

DESCRIPTION

WASHER (M16, HARDENED) HYDRAULIC MOTOR HYDRAULIC MOTOR SCREW (M16-2.00 X 50MM) CONNECTOR (06S-08O45) BK CONNECTOR (08O-08O90BK) CONNECTOR (12S-16O45) UNION (16O-16OFX90) CONNECTOR (16O-16OFX45) ABRASION SLEEVE (3.66" X 54") MACH BUSHING (1-1/2", 14GA) HOSE (16OFX-62"-5000) HOSE (16OFX45-60"-4000) HOSE (08OFX-62"-3000) HYDRAULIC MOTOR BK CONNECTOR (16O-16O45BK) O-RING (356 D70)

REMARKS

LOW SPEED, SEE FOOTNOTE 2,4,5 HIGH SPEED, SEE FOOTNOTE 3,4,5 LOCTITE 271 OR EQUIVALENT

MID SPEED, SEE FOOTNOTE 1,4,5

NOT SHOWN:

FOOTNOTES:

1. SUPERCEDED BY 150-1038 2. SUPERCEDED BY 150-1039 3. SUPERCEDED BY 150-1040 4. SEAL KIT # 150-1041, FOR HYD MOTORS: 150-1038, 150-1039, 150-1040 5. APPLY COUPLING GREASE CMW P/N 256-648 TO SHAFT SPLINES BEFORE ASSEMBLY (TEXACO P/N 221912)

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS. 2. ITEMS 7, 8, 9 & 16 ARE IN MOTOR KIT 604-952, ITEMS 8, 9, 14 & 16 ARE IN MOTOR KIT 604-953, ITEMS 8, 9, 15, & 16 ARE IN MOTOR KIT 604-954.

3. SEAL KIT# 191-373 USED IN ITEMS 159-562, 159-563, 159-950.

08

ID0015388

34

SLIDE HYDRAULICS H515/H813

11

1

8

3 7 2 5 10

6

9

2

9 4

06

ID0014763

35

SLIDE HYDRAULICS H515/H813 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11

1 1 1 1 1 1 2 1 2 1 1

159-631 154-706 154-726 151-090 117-566 117-214 154-261 106-381 154-226 110-030 116-941

DESCRIPTION

REMARKS

HYD CONTROL VALVE (2-SPOOL) HOSE (04OFX90S-40"-3000) HOSE (04OFX90-15"-3000) CYL (2.5 X 1.50 X 24.0) ABRASION SLEEVE (1.25" X 11") ABRASION SLEEVE (1.25" X 40") CONNECTOR (04O-08S) FLG LK SCREW (M8-1.25 X 25MM) CONNECTOR (04O-06S90) CABLE TIE (1/16" TO 4") HANDLE (3/8-NC, GREEN)

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT O-RINGS.

06

ID0014763

36

HYDRAULIC CYLINDER 3.5" X 2" X 12"

2

1 3 4 5 6

7

8

03

ID0022857

37

HYDRAULIC CYLINDER 3.5" X 2" X 12" REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

151-047 190-175 149-302 150-297 106-145 106-144 150-992 150-759 150-429

NOT SHOWN: 259-040 259-239 259-244 259-245 259-188

QTY

DESCRIPTION

REMARKS

INCLUDES REF NO.'S 1-8

1 1 1 1 1 1 1 1

HYDRAULIC CYLINDER(3.5" X 2" X 12") SEAL REPAIR KIT (3.5" X 2") LOCK RING (3.5") CYLINDER BARREL BOLT (1-NC X 2-1/4",GD 8) WASHER (1") CYLINDER PISTON CYLINDER HEAD CYLINDER ROD

SEE FOOTNOTE 1 INCLUDES MOLDED-ON WEAR RING

U-SEAL INSTALLER (1.5" - UP) WIPER/SEAL INSTALLER (2") PISTON SEAL INSTALLER (3.5") PISTON INSTALLER (3.5") CYL HEAD SPANNER - TWO PIN

NOT SHOWN:

FOOTNOTES:

1. APPLY LOCTITE 271 OR 277. TORQUE TO 630 - 700 FT-LBS (855 - 950 N.M.)

NOTE:

03

ID0022857

38

39

40

41

42

NOTES:

ID0134963

43

ACCESSORIES

44

ROLLER BOOM 2P

HIGH HEADSHAFT H300/H313/H400/M500/H552/H514/H515/H553

12

3 1 12

7 6

11 10

4 9

2 9 5 8 11

ID0025105

45

ROLLER BOOM 2P

HIGH HEADSHAFT H300/H313/H400/M500/H552/H514/H515/H553 REF PART NO. NUMBER

QTY

141-491 143-050 143-060 143-051 143-061 141-488 142-751 151-053 180-448 115-003 115-165 125-209 115-165 115-019 105-313 180-062 115-276 159-093 115-001

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

1 1 1 1 1 1

1 1 1 1 2 1 1 2

DESCRIPTION

REMARKS

BOOM ASSEMBLY 42" LT ROLLER BOOM (2.000"P) 48" LT ROLLER BOOM (2.000"P) 3' BOOM (2.000"P, 47.21") BOOM (59.21") 2P-5FT BOOM LT ROLLER (2.000"P, 14.5") CYL (1.5" X 1.5" X 8.375") IDLER SHAFT (1.25" X 3.50") ZERK (1/4-NF, STR) PLUG (08N, SOC) TAPERED BEARING/RACE (1.250") PLUG (08N, SOC) ZERK (02N) IDLER NUT (1-1/4-NF) DIRT SHIELD REDUCER (16N-08NF) RELIEF VALVE (5/8-NF, 02N) ZERK (02N)

INCL REF NO.'S 1 THRU 12, USES 108 P INCL REF NO.'S 1 THRU 12, USES 84 P INCL REF NO.'S 1 THRU 12, USES 96 P

INCL'S REF NO. 5 AND 9

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. REFER TO REPLACEMENT DIAGRAM 052-519

NOTE:

11

ID0025105

46

ROLLER BOOM 3P

H515/H516/H553/H813/H853

2 3

1 2 12 7

15

9

11

19

10

5

2 14

13 8

6 15 4

4

16

16

8

5

13

18 17

19 9

02

ID0273651

47

ROLLER BOOM 3P

H515/H516/H553/H813/H853 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

QTY

143-120 143-130 143-358 140-1225 190-183 143-102 1 143-101 1 143-347 1 140-1210 1 115-001 3 151-053 1 115-470 2 125-216 2 110-220 AR 115-019 1 145-589 2 155-852 2 115-151 1 159-093 1 180-441 1 184-067 2 105-377 1 115-152 2 125-265 2 142-756 1 181-697 1 181-699 2

DESCRIPTION

REMARKS

LTR WEAR BAR BOOM (36" 3P) LTR WEAR BAR BOOM (48" 3P) LTR NON-WEAR BAR BOOM (48" 3P) LTR WEAR BAR BOOM (60" 3P) BEARING/SEAL REPAIR KIT BOOM 3P 3' BOOM (3P, 4') BOOM (3P, 4') 3P 5FT BOOM ZERK (O2N) CYL (1.5" X 1.5" X 8.375") INTERNAL SNAP RING (3.250") TAPERED RACE (3.265") MACH BUSHING (1-1/2", 14GA) ZERK (02N) SPACER EXTERNAL SEAL (2.250") REDUCER (16N-12NF) RELIEF VALVE (5/8-NF, 02N) IDLER SHAFT (1.500" X 4.375") SEAL SPACER JAM NUT (1-1/2-NF) PLUG (12N, SQ FM) TAPERED BEARING (1.500") LT ROLLER (3.067"C17.2") BEARING SPACER SEAL SLEEVE

INCL REF NO.'S 1 - 19, USES 52 P INCL REF NO.'S 1 - 19, USES 62 P INCL REF NO.'S 1 - 7, AND 9 - 19, USES 62 P INCL REF NO.'S 1 - 19, USES 72 P, SEE FOOTNOTE 1 INCL REF NO.'S 4, 5, 8, 9, 16, 18, & 19

NON-WEAR BAR SEE FOOTNOTE 1

DO NOT INSTALL ON THE 143-358 BOOM

NOT SHOWN:

FOOTNOTES:

1. THE H515, H516, H553, H813, AND H853 UNITS USE THE 5' BOOM, 140-1210, (ASSEMBLY 140-1225). PREVIOUS UNITS USE THE 5' BOOM, 143-370, (ASSEMBLY 143-375).

NOTE:

02

ID0273651

48

49

50

BOOM

1 4

2

3

01

ID0138873

51

BOOM REF PART NO. NUMBER

1.

2.

3.

4.

140-124 140-125 140-330 140-126 140-129 140-765 140-766 140-758 140-751 105-367 105-419 140-114 140-267 140-121 140-115 140-120 140-328 140-116

QTY

2 2 1 2 1 2 1 1 1 2 2 1 2 1 1

DESCRIPTION

BOOM PARTS ASS'Y (42.8 2P) BOOM PARTS ASS'Y (58.8 2P) BOOM PARTS ASS'Y (70.9 2P) BOOM PARTS ASS'Y (83.0 2P) BOOM PARTS ASS'Y (83.0 3P) SLIDE AND STOP SLIDE AND STOP SIDE PLATE SLIDE AND STOP SLIDE PLATE LOCKNUT (1-NC) BOLT (1-NC X 4") BOOM (44") SIDE PLATE ROCK GUARD BOOM (60.5") SIDE PLATE BOOM (70-7/8") BOOM (83")

REMARKS

FOR 2" P FOR 3" P

WELD-ON WELD-ON WELD-ON

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0138873

52

TRENCH CLEANER

2

16 16

17

9 8

15 9

18

17 17 10

1 17

11

19 4 14 13

6

3

5 7

12

04

ID0012405

53

TRENCH CLEANER REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

1 CLEANER 1 CARRIAGE 1 LOWER CLEANER FLAP 1 LOWER CLEANER 1 BOLT PLATE 4 SCREW (M8-1.25 X 60MM) 1 SPOILS FLAP (5") 1 LOCKNUT (1/2-NC) 2 WASHER (1/2") 2 LOCKNUT (5/8-NC) 2 BOLT (5/8-NC X 3-1/2") 9 LOCKNUT (M8-1.25, NLK) 2 SCREW (M8-1.25 X 50MM) 3 SCREW (M8-1.25 X 35MM) 2 PIN 4 KLIP RING (1.250") 4 SPRING BUSHING (.500) 1 BOLT (1/2-NC X 7.00", GD5) 5 WASHER (5/16")

141-765 329-870 118-367 325-615 325-660 106-570 118-177 105-065 105-071 105-357 106-212 107-096 106-329 106-267 177-183 115-483 105-1031 105-1030 105-117

DESCRIPTION

REMARKS

118-374 (6") 118-375 (7") SEE FOOTNOTE 1

118-178 (6") 118-179 (7") SEE FOOTNOTE 1

NOT SHOWN:

104-055

TRENCH CLEANER KIT

INCL. REF #'S 1-20

FOOTNOTES:

1- KIT #'S 191-465 (5") 191-466 (6") 191-467 (7")

NOTE:

04

ID0012405

54

PERSONNEL RESTRAINT 2P

7

OPTION 6 2

4

8

5

1 8 3

03

ID0139700

55

PERSONNEL RESTRAINT 2P

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

QTY

105-386 2 106-480 2 106-442 4 105-994 4 105-340 4 106-851 2 106-191 2 107-337 2 107-720 2 141-268 1 141-274 1 140-0008 1 141-354 1 141-350 1 141-276 1 141-371 1 141-373 1 141-277 1 141-372 1 141-374 1 141-280 1 106-949 4

DESCRIPTION

BOLT (5/8-NC X 4-1/2") SCREW (M16-2.00 X 110mm, 10.9) FLG LOCKNUT (M16-2.00, PRV TRQ) FLG LOCKNUT (5/8-NC) FLG LOCKNUT (3/4-NC) LOCKNUT (M18-2.5) BOLT (5/8-NC X 6", GD8) SCREW (M16-2.00 X 150mm, 10.9) SCREW (M18-2.5 X 160mm, 10.9) RESTRAINT BAR (46", 2P) RESTRAINT BAR (56", 2P) RESTRAINT BAR (60", 2P) RESTRAINT BAR (69", 2P) RESTRAINT BAR (80.5", 2P) LEFT MOUNT BRACKET LEFT MOUNT BRACKET (12") LEFT MOUNT BRACKET (16") RIGHT MOUNT BRACKET RIGHT MOUNT BRACKET (12") RIGHT MOUNT BRACKET (16") SUPPORT SPACER WASHER (3/4", HARDENED)

REMARKS

H313, H314, H514 M552 LOWER MOUNT BRACKET ONLY; TORQUE TO 650 FT-LBS H514 LOWER MOUNTING BOLTS H313, H314 H514, SEE FOOTNOTE 2 ROLLER BOOM ROLLER BOOM (FOR 3' AND 44" BOOM) ROLLER BOOM (FOR 4' BOOM) STANDARD BOOM "& 5'-50K ROLLER BOOM" STANDARD BOOM (FOR 5' BOOM) 3610 3610 3610 3610 SEE FOOTNOTE 1 H514, SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. WHEN H312 OR H314 ATTACHMENT IS USED IN AN OFFSET POSITION THE RIGHT MOINT BRACKET WILL BE REPLACED BY REF. NO. 7 (41-280) SUPPORT SPACER 2. EARLY PRODUCTION UNITS USED 107-688 WITH TWO HARDENED WASHERS. CURRENT PRODUCTION UNITS USE 107-720 WITH FOUR HARDENED WASHERS

NOTE:

03

ID0139700

56

PERSONNEL RESTRAINT 3P

10 9

8 5

2 7

1 6 4

A

3

809-407

57

PERSONNEL RESTRAINT 3P

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10

106-633 106-356 106-949 107-720 106-851 323-652 323-653 141-040 141-041 141-043

QTY

4 4 2 2 2 1 1 1 1 1

DESCRIPTION

BOLT (M20-2.50 X 130MM) FLG NUT (M20-2.50, 10.9) WASHER (3/4", HARDENED) SCREW (M18-2.5 X 160MM, 10.9) LOCKNUT (M18-2.5) LEFT RESTRAINT BRACKET (3P) RIGHT RESTRAINT BRACKET (3P) RESTRAINT BAR (60.0", 3P) RESTRAINT BAR (68.0") 3P RESTRAINT BAR (81.0", 3P)

REMARKS

TORQUE TO 250 FT-LB

FOOTNOTES

NOTE:

A

809-407

58

TRENCH CLEANER 2P

17

16

12 6

14 19

1

9

5

2

6 13 15

3

20 4 3 8 10

18

11

3

7

04

ID0139175

59

TRENCH CLEANER 2P

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

QTY

190-2406 190-2604 105-065 3 105-071 2 183-179 4 105-279 2 105-386 2 106-191 2 106-480 2 105-994 4 105-340 2 106-442 4 106-851 2 106-191 2 105-464 2 107-337 2 107-720 2 115-503 8 115-602 2 115-1018 2 141-109 2 141-215 1 141-134 1 141-135 1 141-136 1 141-137 1 140-1357 1 140-1358 1 141-211 1 141-132 1 140-1361 1 140-1365 1 140-1352 1 140-1363 1 140-1369 1 140-1354 1 140-1356 1 141-276 1 141-371 1 141-373 1 141-277 1 141-372 1 141-374 1 141-280 3 106-949 4 105-884 2 115-0005 2

DESCRIPTION

MECH CLEANER CONV KIT (ROLLER BOOM) MECH CLEANER CONV KIT (STD BOOM) LOCKNUT (1/2-NC) WASHER (1/2") PIN CARRIAGE BOLT (1/2-NC X 3") BOLT (5/8-NC X 4-1/2") BOLT (5/8-NC X 6", GD8) SCREW (M16-2.0 X 110mm, 10.9) FLG LOCKNUT (5/8-NC) FLG LOCKNUT (3/4-NC) FLG LOCKNUT (M16-2.00,PRV TRQ) LOCKNUT (M18-2.5) BOLT (5/8-NC X 6", GD8) BOLT (3/4-NC X 7", GD8) SCREW (M16-2.00 X 150mm, 10.9) SCREW (M18-2.5 X 160mm, 10.9) KLIP RING (3/4") EXTENSION SPRING EXTENSION SPRING REAR LINK CLEANER SHOE 4" CLEANER SHOE 6" CLEANER SHOE 8" CLEANER SHOE 10" CLEANER SHOE 12" SHOE BEAM (LTS) SHOE BEAM (STD) FRONT LINK FRONT LINK 3' LOWER CLEANER BAR (2.000" P) 3' LOWER CLEANER BAR (2.000" P) 3' LOWER CLEANER BAR (2.000" P) 4' LOWER CLEANER BAR (2.000" P) 4' LOWER CLEANER BAR (2.000" P) 4' LOWER CLEANER BAR (2.000" P) 5' LOWER CLEANER BAR (2.000" P) LEFT MOUNT BRACKET LEFT MOUNT BRACKET (12") LEFT MOUNT BRACKET (16") RIGHT MOUNT BRACKET RIGHT MOUNT BRACKET (12") RIGHT MOUNT BRACKET (16") SUPPORT SPACER WASHER (3/4", HARDENED) WASHER (.531") EXTERNAL SNAP RING (0.500")

REMARKS

INCL REF NO'S 1-4,8-10,12,13, 19 & 20; SEE F/N 1 INCL REF NO'S 1-4,8-10,12,13, 19 & 20; SEE F/N 1

M552 H313, H314, H514 M552 LOWER MOUNT BRACKET ONLY; TORQUE TO 650 FT-LBS H313, H314, H514 (2) H514 LOWER MOUNTING BOLTS M552 H313, H314 H514, SEE FOOTNOTE 4 OLD STYLE; SEE FOOTNOTE 6 SEE FOOTNOTES 5 & 6

ROLLER BOOMS; SEE FOOTNOTE 6 STANDARD BOOMS; SEE FOOTNOTE 6 ROLLER BOOMS STANDARD BOOMS ROLLER BOOMS; SEE FOOTNOTES 3 & 6 ROLLER BOOMS; SEE FOOTNOTES 2 & 6 STANDARD BOOM; SEE FOOTNOTES 2 & 6 ROLLER BOOMS; SEE FOOTNOTES 3 & 6 ROLLER BOOMS; SEE FOOTNOTES 2 & 6 STANDARD BOOM; SEE FOOTNOTES 2 & 6 STANDARD BOOM; SEE FOOTNOTES 2 & 6 3610 3610 3610 3610 M552 H514, SEE FOOTNOTE 4 SEE FOOTNOTE 6 SEE FOOTNOTE 6

FOOTNOTES:

1. REFER TO INSTALLATION DIAGRAM 050-926 2. H311 BEGINS WITH S/N 8K0126; H411 BEGINS WITH S/N 3M0693; H313 3. H312, H412, H314, H514, H450, H552, M552 4. EARLY PRODUCTION UNITS USED 107-688 W/ TWO HARDENED WASHERS. CURRENT PRODUCTION UNITS USE 107-720 W/ FOUR HARDENED WASHERS 5. INSTALL SPRING 115-1018 SO THAT OPEN ENDS OF THE COILS ARE FACING IN TOWARDS THE CLEANER BAR AND SHOE BEAM. 6. IF REPLACING OLD SPRINGS, CLEANER BAR OR SHOE BEAM, USE NEW CLEANER BAR AND SHOE BEAM SHOWN ON THIS PAGE, & INSTALL TRENCH CLEANER SPRING KIT 190-2669.

NOTE:

04

ID0139175

60

TRENCH CLEANER 3P

17

9

17

5

6

7 8 4 13 16 2 18

9

3 12

1 10

12

15

14 11

08

ID0109686

61

TRENCH CLEANER 3P REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

100-129 105-047 105-052 105-118 105-320 105-338 183-057 181-216 105-502 110-128 116-033 116-034 116-035 116-036 140-952 141-661 141-052 143-148 141-348 141-053 143-147 141-353 141-351 140-975 140-976 140-977 180-573 140-955 141-662 180-559

QTY

6 6 6 2 2 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CLEANER SHOE & SLIDE KIT LOCKNUT (3/8-NC) BOLT (3/8-NC X 1-1/4") WASHER (3/8") BOLT (3/4-NV X 2-1/4") LOCKNUT (3/4-NC) SLIDE LOCK PIN ROLLER COTTER PIN (3/16" X 2") SPRING CLIP PIN (5/32" X 1") SHOE FACING (6") SHOE FACING (8") SHOE FACING (10") SHOE FACING (12") CLEANER SHOE CLEANER SHOE CLEANER SHOE (44") 3P, 3' CLEANER BAR 3P, 3' CLAENER BAR CLEANER BAR 3P, 4' CLEANER BAR 3P, 4' CLEANER BAR 3P, 5' CLEANER BAR SHOE FACING 8" SHOE FACING 10" SHOE FACING 12" PIN CLEANER SHOE SLIDE CLEANER SHOE SLIDE PULL OIN (1" X 4.625")

INCLUDES REF NO.'S 1-9 & 16-18. SEE FOOTNOTE 1

OBSOLETE FOR 3' ROLLER BOOM, SEE FOOTNOTE 3.

FOR 3' ROLLER BOOM, SEE FOOTNOTE 2, OBSOLETE FOR 3' STD BOOM, SEE FOOTNOTE 2.

FOR 4' ROLLER BOOM, SEE FOOTNOTE 3 & 5.

FOR 4' ROLLER BOOM, SEE FOOTNOTE 2.

FOR 4' STD BOOM, SEE FOOTNOTE 2.

SEE FOOTNOTE 4

OBSOLETE

NOT SHOWN:

FOOTNOTES:

1. REFER TO INSTALLATION DIAGRAM 050-066 2. H411 3. H412, H514, M552 4. FOR 5' STD BOOM, SEE FOOTNOTE 2; FOR 5' ROLLER BOOM, SEE FOOTNOTE 3 5. H552 NOTE: THE ONLY 3P BOOM THAT CAN BE MOUNTED ON THE H552 IS THE 4' LTR NON-WEARBAR BOOM (143-358) NOTE:

08

ID0109686

62

63

64

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 1

2

1

3

4 5 6 REPAIR PART# 131-115 138-228 1 131-135 0 138-218 0 135-1236 19 135-1233 16 135-964 10 135-912 3 135-950 5 105-043 28 105-066 10 105-002 12 105-076 20 105-065 70 105-111 0 135-913 0 135-914 0

01

131-116 1 0 0 19 18 4 3 2 26 8 12 8 72 20 5 0

131-117 1 0 0 18 18 16 2 2 16 20 8 8 72 8 2 3

CHAIN ASSEMBLIES 131-137 131-138 0 0 1 1 0 0 16 16 16 16 0 0 0 0 0 0 64 64 0 0 0 0 0 0 64 64 0 0 0 0 0 0

133-322 0 0 1 17 17 0 0 0 68 0 0 0 68 0 0 0

7

133-293 0 0 1 17 17 0 0 0 68 0 0 0 68 0 0 0

ID0446692

65

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 1 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7

1 1 1 1 1 1 1

131-115 131-116 131-117 131-137 131-138 133-322 133-293

DESCRIPTION

REMARKS

50K 2P DURA 54P 10.1" 50K 2P DURA 54P 12.1" 50K 2P DURA 54P 16" 50K 2P DURA 64P 5.1" 50K 2P DURA 64P 6.1" 50K 2P DURA 68P 5.1" 50K 2P DURA 68P 6.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-228 50K DIGGING CHAIN STD 2P (54P) 131-135 50K DIGGING CHAIN STD 2P (64P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 135-964 TOOTH SPACER (1/4") 135-912 TOOTH ADAPTER (8") 135-950 TOOTH ADAPTER (10") 105-043 BOLT (1/2-NC X 1-1/4") 105-066 BOLT (1/2-NC X 1-3/4") 105-002 BOLT (1/2-NC X 2 1/4") 105-076 BOLT (1/2-NC X 3") 105-065 LOCKNUT (1/2-NC) 105-111 BOLT (1/2-NC X 4") 135-913 TOOTH ADAPTER (12") 135-914 TOOTH ADAPTER (16") 105-275 BOLT (1/2-NC X 6")

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446692

66

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 2

1

4

6

5

01

REPAIR Part# 131-009 138-217 0 138-215 0 138-218 1 135-1236 21 135-1233 21 135-964 0 135-912 8 135-950 0 105-043 52 105-066 0 105-002 32 105-076 0 105-065 84 105-111 0 135-913 0

3

2

131-010 0 0 1 21 21 0 4 4 52 0 16 16 84 0 0

131-011 0 0 1 21 22 12 3 3 38 12 12 12 86 12 3

CHAIN ASSEMBLIES 133-324 133-290 131-008 0 0 0 1 1 1 0 0 0 18 18 22 18 18 24 0 0 12 0 0 3 0 0 4 72 72 40 0 0 12 0 0 12 0 0 16 72 72 94 0 0 12 0 0 3

7

133-358 1 0 1 20 20 0 0 0 80 0 0 0 80 0 0

8

133-359 1 0 1 20 20 0 0 0 80 0 0 0 80 0 0

ID0446728

67

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 2 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

131-009 131-010 131-011 133-324 133-290 131-008 133-358 133-359

DESCRIPTION

REMARKS

50K 2P DURA 68P 8.6" 50K 2P DURA 68P 10.25" 50K 2P DURA 68P 12.1" 50K 2P DURA 72P 5.1" 50K 2P DURA 72P 6.1" 50K 2P DURA 72P 12.1" 50K 2P DURA 80P 5.1" 50K 2P DURA 80P 6.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-217 50K DIGGING CHAIN STD 2P (12P) 138-215 50K DIGGING CHAIN STD 2P (72P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 135-964 TOOTH SPACER (1/4") 135-912 TOOTH ADAPTER (8") 135-950 TOOTH ADAPTER (10") 105-043 BOLT (1/2-NC X 1-1/4") 105-066 BOLT (1/2-NC X 1-3/4") 105-002 BOLT (1/2-NC X 2 1/4") 105-076 BOLT (1/2-NC X 3") 105-065 LOCKNUT (1/2-NC) 105-111 BOLT (1/2-NC X 4") 135-913 TOOTH ADAPTER (12")

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446728

68

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3

3 2

1

4

8

7 5

REPAIR Part# 131-012 138-217 1 135-1532 0 138-218 1 135-1236 25 135-1233 25 135-964 0 135-912 10 135-950 0 105-043 60 105-066 0 105-002 40 105-076 0 105-065 100 105-111 0 135-913 0

01

131-013 1 0 1 25 25 0 5 5 60 0 20 20 100 0 0

131-014 1 0 1 26 25 16 3 4 42 16 12 16 100 16 4

6

CHAIN ASSEMBLIES 133-356 133-325 131-015 0 0 0 1 1 1 0 0 0 21 21 26 21 21 26 0 0 0 0 0 10 0 0 0 84 84 64 0 0 0 0 0 40 0 0 0 84 84 104 0 0 0 0 0 0

131-016 0 1 0 26 26 0 5 5 64 0 20 20 104 0 0

131-017 0 1 0 27 26 16 3 4 46 16 12 16 106 16 4

ID0446855

69

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

131-012 131-013 131-014 133-356 133-325 131-015 131-016 131-017

DESCRIPTION

REMARKS

50K 2P DURA 80P 8.75" 50K 2P DURA 80P 10.1" 50K 2P DURA 80P 12.1" 50K 2P DURA 84P 5.1" 50K 2P DURA 84P 6.1" 50K 2P DURA 84P 8.75" 50K 2P DURA 84P 10" 50K 2P DURA 84P 12"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-217 50K DIGGING CHAIN STD 2P (12P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 135-964 TOOTH SPACER (1/4") 135-912 TOOTH ADAPTER (8") 135-950 TOOTH ADAPTER (10") 105-043 BOLT (1/2-NC X 1-1/4") 105-066 BOLT (1/2-NC X 1-3/4") 105-002 BOLT (1/2-NC X 2 1/4") 105-076 BOLT (1/2-NC X 3") 105-065 LOCKNUT (1/2-NC) 105-111 BOLT (1/2-NC X 4") 135-913 TOOTH ADAPTER (12")

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446855

70

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4

4

3 2 1

7 6 5

REPAIR Part# 133-330 138-219 1 138-215 1 138-216 0 135-1533 0 135-1532 0 138-218 0 135-1236 22 135-1233 22 105-043 88 105-065 88

01

133-294 1 1 0 0 0 0 22 22 88 88

133-360 0 0 1 0 0 1 23 23 92 92

CHAIN ASSEMBLIES 133-361 133-331 133-291 0 0 0 0 0 0 1 0 0 0 1 1 0 0 0 1 0 0 23 24 24 23 24 24 92 96 96 92 96 96

133-332 1 0 0 0 1 0 25 25 100 100

ID0446920

71

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7

1 1 1 1 1 1 1

133-330 133-294 133-360 133-361 133-331 133-291 133-332

DESCRIPTION

REMARKS

50K 2P DURA 88P 5.1" 50K 2P DURA 88P 6.1" 50K 2P DURA 92P 5.1" 50K 2P DURA 92P 6.1" 50K 2P DURA 96P 5.1" 50K 2P DURA 96P 6.1" 50K 2P DURA 100P 5.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-219 50K DIGGING CHAIN STD 2P (16P) 138-215 50K DIGGING CHAIN STD 2P (72P) 138-216 50K DIGGING CHAIN STD 2P (24P) 135-1533 50K DIGGING CHAIN STD 2P (96P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 105-043 BOLT (1/2-NC X 1-1/4") 105-065 LOCKNUT (1/2-NC)

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446920

72

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 5

4 3 1

2

8 7

5

REPAIR Part# 133-224 138-219 1 138-217 0 138-216 0 135-1533 0 135-1532 1 138-218 0 135-1236 25 135-1233 25 105-043 100 105-065 100

01

133-333 0 1 0 1 0 0 27 27 108 108

133-292 0 1 0 1 0 0 27 27 108 108

6

CHAIN ASSEMBLIES 133-295 133-264 133-336 1 0 0 0 0 0 0 2 1 1 0 1 0 0 0 0 1 0 28 29 30 28 29 30 112 116 120 112 116 120

133-268 0 0 1 1 0 0 30 30 120 120

ID0446942

73

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 5 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

133-224 133-333 133-292 133-291 133-295 133-364 133-336 133-268

DESCRIPTION

REMARKS

50K 2P DURA 100P 6.1" 50K 2P DURA 108P 5.1" 50K 2P DURA 108P 6.1" 50K 2P DURA 96P 6.1" 50K 2P DURA 112P 6.1" 50K 2P DURA 116P 5.1" 50K 2P DURA 120P 5.1" 50K 2P DURA 120P 6.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-219 50K DIGGING CHAIN STD 2P (16P) 138-217 50K DIGGING CHAIN STD 2P (12P) 138-216 50K DIGGING CHAIN STD 2P (24P) 135-1533 50K DIGGING CHAIN STD 2P (96P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 105-043 BOLT (1/2-NC X 1-1/4") 105-065 LOCKNUT (1/2-NC)

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446942

74

50K DURATOOTH/C2X ASB CHAINS 2P CHAIN ASSEMBLIES

1

2

REPAIR Part# 133-282 138-278 2 138-279 1 138-280 1 138-281 0 135-1236 17 135-1233 17 135-1237 0 135-1234 0 105-043 68 105-065 68

01

3

4 5

CHAIN ASSEMBLIES 133-299 135-1311 135-1308 135-1301 1 1 1 2 0 0 0 1 1 1 1 1 1 1 1 0 28 0 0 0 28 0 0 0 0 28 28 17 0 28 28 17 112 112 112 68 112 112 112 68

ID0447026

75

50K DURATOOTH/C2X ASB CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5

1 1 1 1 1

135-1301 133-282 133-299 135-1311 135-1308

DESCRIPTION

REMARKS

50K C2X ASB 68P 5.12" 50K DURA ASB 68P 5.1" 50K DURA ASB 112P 6.1" 50K ASB C2X 112P 5.1" 50K ASB C2X 112P 6.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-278 50K DIGGING CHAIN ASB 2P (16P) 138-279 50K DIGGING CHAIN ASB 2P (12P) 138-280 50K DIGGING CHAIN ASB 2P (24P) 138-281 50K DIGGING CHAIN ASB 2P (72P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 135-1237 DURATOOTH C2X, RIGHT 1/4" 50K 135-1234 DURATOOTH C2X, LEFT 1/4" 50K 105-043 BOLT (1/2-NC X 1-1/4") 105-065 LOCKNUT (1/2-NC)

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0447026

76

50K COMBO CHAINS 2P DIGGING CHAINS

1

3

2

4

5

6 REPAIR Part# 131-140 131-135 1 138-218 0 138-217 0 135-1532 0 135-1533 0 138-223 0 138-228 0 135-1236 8 135-1233 8 136-236 5 136-237 5 136-240 3 136-241 3 136-036 0 136-037 0 136-040 0

01

136-041 135-912 135-950 135-913 136-237 135-952 136-043 105-076 105-111 105-136 105-002 105-110 105-065

0 0 0 0 0 48 16 16 16 32 0 0 64

131-415 0 1 0 0 0 0 0 8 8 5 5 4 4 0 0 0

131-412 0 1 1 0 0 0 0 10 10 6 6 4 4 0 0 0

0 0 0 0 0 52 16 16 20 32 0 0 68

0 0 0 0 0 60 20 20 20 40 0 0 80

CHAIN ASSEMBLIES 131-413 131-416 135-1483 131-404 0 0 0 0 0 0 0 1 0 0 0 1 1 0 0 0 0 1 0 0 0 0 1 0 0 0 1 0 11 12 9 10 11 12 9 10 5 7 0 0 5 7 0 0 5 5 9 0 5 5 9 0 0 0 0 6 0 0 0 6 0 0 0 4 0 0 0 0 0 64 20 20 20 44 0 0 84

0 0 0 0 0 72 24 24 24 48 0 0 96

0 3 3 3 3 24 18 18 0 36 12 12 78

4 0 0 0 0 60 20 20 20 40 0 0 80

8

7 131-405 0 0 0 1 0 0 0 11 11 0 0 0 0 5 5 5

131-408 0 0 0 0 1 0 0 12 12 0 0 0 0 7 7 5

5 0 0 0 0 64 20 20 20 44 0 0 84

5 0 0 0 0 72 24 24 24 48 0 0 96

9

ID0447522

77

50K COMBO CHAINS 2P DIGGING CHAINS REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9

1 1 1 1 1 1 1 1 1

131-416 135-1483 131-404 131-405 131-408 131-140 131-415 131-412 131-413

DESCRIPTION

50K 2P DURA/SHK B 96P 6.0 50K 2P CMB DURA/SHK B 60P 12" 50K 2P CMB DURA/ALG 80P 6.0 50K 2P CMB DURA/ALG 84P 6.0 50K 2P CMB DURA/ALG 96P 6.0 50K 2P CMB DURA/SHK B 64P 6.0" 50K 2P CMB DURA/SHK B 68P 6.0" 50K 2P CMB DURA/SHK B 80P 6.0" 50K 2P DURA/SHK B 84P 6.0"

REMARKS

SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

131-135 50K DIGGING CHAIN STD 2P (64P) 138-218 50K DIGGING CHAIN STD 2P (68P) 138-217 50K DIGGING CHAIN STD 2P (12P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 135-1533 50K DIGGING CHAIN STD 2P (96P) 138-223 50K DIGGING CHAIN STD 2P (4P) 138-228 50K DIGGING CHAIN STD 2P (54P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 136-236 50K LEFT INSIDE BOLT-ON SHARK ADAPTER 136-237 50K RIGHT INSIDE BOLT-ON SHARK ADAPTER 136-240 50K LEFT OUTSIDE WIDE BOLT-ON SHARK ADAP 136-241 50K RIGHT OUTSIDE WIDE BOLT-ON SHARK ADAP 136-036 50K CAST BIT ADAPTER, R.O. 136-037 50K CAST BIT ADAPTER, L.O. 136-040 50K CAST BIT ADPTR #10POS R.O. 136-041 50K CAST BIT ADPTR #10POS L.O. 135-912 TOOTH ADAPTER (8") 135-950 TOOTH ADAPTER (10") 135-913 TOOTH ADAPTER (12") 136-237 50K RIGHT INSIDE BOLT-ON SHARK ADAPTER 135-952 CHAIN SPACER (1.750") 136-043 SPACER 105-076 BOLT (1/2-NC X 3") 105-111 BOLT (1/2-NC X 4") 105-136 BOLT (1/2-NC X 3-1/2", GD8) 105-002 BOLT (1/2-NC X 2 1/4") 105-110 BOLT (1/2-NC X 4.5") 105-065 LOCKNUT (1/2-NC) FOOTNOTES:

USES 136-112 INSERT BITS

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0447522

78

50K ALLIGATOR & SHARK CHAINS 2P CHAIN ASSEMBLIES

1

2

5

4

3

6

01

REPAIR Part# 135-336 138-218 1 138-215 0 138-217 0 135-1532 0 135-1533 0 136-036 10 136-037 16 136-038 4 136-039 4 136-040 4 136-041 4 136-236 0 136-237 0 136-238 0 136-239 0 136-240 0 136-241 0 135-952 44 136-043 24 105-076 24 105-110 16 105-111 28 105-065 68

135-335 0 1 0 0 0 14 14 4 4 4 4 0 0 0 0 0 0 48 24 24 16 32 72

138-230 1 0 1 0 0 16 16 4 4 4 4 0 0 0 0 0 0 48 32 32 16 32 80

8

7

CHAIN ASSEMBLIES 135-337 138-225 132-302 0 0 1 0 0 0 0 0 0 1 0 0 0 1 0 17 19 0 17 19 0 4 5 0 4 5 0 4 5 0 4 5 0 0 0 13 0 0 13 0 0 4 0 0 4 0 0 4 0 0 4 52 60 44 32 36 24 32 36 24 16 20 16 36 40 28 84 96 68

132-301 0 1 0 0 0 0 0 0 0 0 0 14 14 4 4 4 4 48 24 24 16 32 72

132-303 0 0 0 1 0 0 0 0 0 0 0 17 17 4 4 4 4 52 32 32 16 36 84

ID0447762

79

50K ALLIGATOR & SHARK CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-336 135-335 138-230 135-337 138-225 132-302 132-301 132-303

DESCRIPTION

50K 2P ALG B-O 68P 5.250 50K 2P ALG 72P 5.2 "NS" 50K 2P ALG 80P 5.25" 50K 2P ALG 84P 5.3" 50K 2P ALG 96P 5.3 50K 2P SHK B-O 68P 5.3 50K 2P B-O SHK 72P 5.5" 50K 2P SHK B-O 84P 5.3"

REMARKS

SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-218 50K DIGGING CHAIN STD 2P (68P) 138-215 50K DIGGING CHAIN STD 2P (72P) 138-217 50K DIGGING CHAIN STD 2P (12P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 135-1533 50K DIGGING CHAIN STD 2P (96P) 136-036 50K CAST BIT ADAPTER, R.O. 136-037 50K CAST BIT ADAPTER, L.O. 136-038 50K CAST BIT ADPTR #9 POS L.O. 136-039 50K CAST BIT ADPTR #9 POS R.O. 136-040 50K CAST BIT ADPTR #10POS R.O. 136-041 50K CAST BIT ADPTR #10POS L.O. 136-236 50K LEFT INSIDE BOLT-ON SHARK ADAPTER 136-237 50K RIGHT INSIDE BOLT-ON SHARK ADAPTER 136-238 50K RT OUTSIDE BOLT-ON SHARK ADPTER 136-239 50K LT OUTSIDE BOLT-ON SHARK ADPTER 136-240 50K LEFT OUTSIDE WIDE BOLT-ON SHARK ADAP 136-241 50K RIGHT OUTSIDE WIDE BOLT-ON SHARK ADAP 135-952 CHAIN SPACER (1.750") 136-043 SPACER 105-076 BOLT (1/2-NC X 3") 105-110 BOLT (1/2-NC X 4.5") 105-111 BOLT (1/2-NC X 4") 105-065 LOCKNUT (1/2-NC)

FOOTNOTES:

USES 136-112 INSERT BITS

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0447762

80

50K WELDED ALG/ SHARK II CHAINS 2P CHAIN ASSEMBLIES

3

2

1

4 5 6 7 8

01

ID0488231

81

50K WELDED ALG/ SHARK II CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

131-050 131-096 131-097 131-175 131-171 131-172 131-173 131-174

DESCRIPTION

REMARKS

50K 2P ALG W/O 80P 6.0 50K 2P ALG W/O 84P 6.0 50K 2P ALG W/O 96P 6.0 50K 2P SHK II W-O 54P 6.0 50K 2P SHK II W-O 68P 6.0 50K 2P SHK II W-O 80P 6.0 50K 2P SHK II W-O 84P 6.0 50K 2P SHK II W-O 96P 6.0

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0488231

82

DIGGING CHAIN 3.067" P - 70,000 LB

8 10 7

6

9

4 5

15

12

1 13 3 14

11

2 6

04

ID0093092

83

DIGGING CHAIN 3.067" P - 70,000 LB REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

QTY

DESCRIPTION

105-372 AR LOCKNUT (3/4-NC) 105-499 AR BOLT (3/4-NC X 1-3/4") 105-466 AR BOLT (3/4-NC X 2-1/2") 105-339 AR BOLT (3/4-NC X 2-3/4") 105-321 AR BOLT (3/4-NC X 3") 105-365 AR BOLT (3/4-NC X 4") 106-086 AR BOLT (3/4-NC X 4-1/4") 105-383 AR BOLT (3/4-NC X 6") 135-402 AR LOCK KEY (5/16" X 3/4") 135-910 AR LEFT CUP TOOTH 135-1239 AR DURATOOTH, LEFT 3/8 70-110K 135-1240 AR DURATOOTH C2X, LEFT 3/8 70-110K 135-911 AR RIGHT CUP TOOTH 135-1242 AR DURATOOTH, RIGHT 3/8 70-110K 135-1243 AR DURATOOTH C2X, RIGHT 3/8 70-110K 135-921 AR TOOTH SPACER (3/8") 136-070 AR TOOTH SPACER (1/2") 135-960 AR SPACER (1/8") 135-961 AR CHAIN SPACER (.8") 135-962 AR CHAIN SPACER (1.9") 135-979 AR CHAIN SPACER (2.16") 136-109 AR LEFT TOUGH TOOTH 90 136-110 AR RIGHT TOUGH TOOTH 90 136-120 AR TOOTH ADAPTER 136-071 AR TOOTH ADAPTER 137-501 AR DIG CHAIN PIN (70K) 138-503 AR ROLLER LINK 138-504 AR TOOTH SIDEBAR 138-505 AR TOOTH SIDEBAR 138-701 AR 2'-2" CHAIN (8 P) 138-702 AR 4'-2" CHAIN (16 P) 138-703 AR 13'-3" CHAIN (52 P) 138-707 AR 14'-4" CHAIN (56 P) 138-704 AR 15'-10" CHAIN (62 P)

REMARKS

OBSOLETE OBSOLETE

OBSOLETE OBSOLETE FOR 10" & 12" WIDTHS. NOT SHOWN KEY SIDE HEAD SIDE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH

NOT SHOWN:

259-140

CHAIN JAWS

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

04

ID0093092

84

DIGGING CHAIN 3.067" P - 70,000 LB 4 PITCH SPACING - RAISED RIVET

8

5

10 1 7 6 9

6

4 2

13

15

14

3 12 11

06

ID0129159

85

DIGGING CHAIN 3.067" P - 70,000 LB 4 PITCH SPACING - RAISED RIVET REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

QTY

105-372 AR 105-499 AR 105-466 AR 105-339 AR 105-321 AR 105-365 AR 105-383 AR 135-402 AR 135-910 AR 135-1239 AR 135-1240 AR 135-911 AR 135-1242 AR 135-1243 AR 135-921 AR 136-070 AR 135-960 AR 135-961 AR 135-962 AR 136-109 AR 136-110 AR 136-120 AR 137-501 AR 135-1182 AR 138-506 AR 138-507 AR 138-509 AR 138-510 AR 138-511 AR 138-512 AR 138-706 AR

DESCRIPTION

LOCKNUT (3/4-NC) BOLT (3/4-NC X 1-3/4") BOLT (3/4-NC X 2-1/2") BOLT (3/4-NC X 2-3/4") BOLT (3/4-NC X 3") BOLT (3/4-NC X 4") BOLT (3/4-NC X 6") LOCK KEY (5/16" X 3/4") LEFT CUP TOOTH DURATOOTH LEFT 3/8" 70-110K DURATOOTH C2X LEFT 3/8" 70-110K RIGHT CUP TOOTH DURATOOTH RIGHT 3/8" 70-110K DURATOOTH C2X RIGHT 3/8" 70-110K SPACER (3/8") SPACER (1/2") SHIM (1/8") CHAIN SPACER (.80") CHAIN SPACER (1.90") LEFT TOUGH TOOTH 90 RIGHT TOUGH TOOTH 90 TOOTH ADAPTER (7.65") DIG CHAIN PIN (70K) 70K STD REPAIR STATION KIT PLAIN SIDEBAR PLAIN SIDEBAR 2'-1" CHAIN (8 P) 4'-1" CHAIN (16 P) 15'-10" CHAIN (62 P) 13'-3" CHAIN (52 P) 14'-4" CHAIN (56 P)

REMARKS

OBSOLETE

OBSOLETE

OBSOLETE OBSOLETE

OBSOLETE, KEY SIDE OBSOLETE, HEAD SIDE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH

NOT SHOWN:

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM,CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

06

ID0129159

86

87

88

PRM CHAIN ALGTR 3P70K2PS RR PR 2 PITCH SPACING-BOLT ON-RAISED RIVET 8 6 10

13 11

3

9

3

13 1

5

13

4

3 5

7 4 5

5 12

12 14

2 3 14

5

11

3 16

2

5

15

02

ID0093161

89

PRM CHAIN ALGTR 3P70K2PS RR PR 2 PITCH SPACING-BOLT ON-RAISED RIVET REF PART NO. NUMBER

QTY

DESCRIPTION

1. 105-322 AR BOLT (3/4-NC X 5-1/2") 2. 105-365 AR BOLT (3/4-NC X 4") 3. 105-372 AR LOCKNUT (3/4-NC) 4. 105-391 AR BOLT (3/4-NC X 4-1/2") 5. 135-1187 AR 70K PREMIUM REPAIR STATION KIT 6. 136-008 AR RETAINER RING 7. 139-701 AR 2'-1" CHAIN (8 P) 139-702 AR 4'-1" CHAIN (16 P) 139-707 AR 14'-6" CHAIN (56 P) 139-704 AR 16'-1" CHAIN (62 P) 8. 136-100 AR BIT (CARBIDE CAP) 136-101 AR BIT (CARBIDE INSERT) 136-102 AR HEAVY DUTY BIT (CARBIDE INSERT) 9. 135-973 AR BIT ADAPTER 10. 135-974 AR BIT ADAPTER 11. 135-975 AR BIT ADAPTER 12. 135-976 AR BIT ADAPTER 13. 135-979 AR CHAIN SPACER (2.156") 14. 135-980 AR CHAIN SPACER (1.405") 15. 137-501 AR DIG CHAIN PIN (70K) 16. 135-402 AR LOCK KEY (5/16" X 3/4")

REMARKS

USE WITH TWO (2) ADAPTERS ON OUTSIDE USE WITH ADAPTER ON INSIDE

LESS ADAPTERS LESS ADAPTERS LESS ADAPTERS LESS ADAPTERS INCL REF NO 17 INCL REF NO 17 INCL REF NO 17 LEFT OUTSIDE RIGHT OUTSIDE LEFT INSIDE AND RIGHT OUTSIDE RIGHT INSIDE AND LEFT OUTSIDE USED WITH ONE OR TWO ADAPTERS ON OUTSIDE USED WITH ONE ADAPTER INSIDE

NOT SHOWN:

259-001 259-002 259-150 259-140 135-957

BIT PULLER - HAMMER BIT PULLER - SLIDE HAMMER BIT PUNCH - SLIDE HAMMER CHAIN JAWS (1-1/8" DRIVE) BIT BLOCK

FOR REF NO.'S 9-12

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

02

ID0093161

90

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

91

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

92

NOTES:

ID0134963

93

MISCELLANEOUS

94

SAE Bolt and Nut Torque Value Chart Grade 5: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

12

16

8

11

20

27

5/16

25

34

15

20

45

60

3/8

40

54

25

34

75

100

7/16

65

90

40

55

125

170

1/2

100

135

60

80

190

260

9/16

150

200

90

125

270

370

5/8

200

270

120

165

370

500

3/4

350

475

210

285

650

880

7/8

560

760

340

460

1250

1425

1

840

1140

500

680

1580

2145

1-1/8

1030

1400

320

840

1950

3645

1-1/4

1460

1980

880

1195

2760

3475

Grade 8: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

14

19

10

14

24

33

5/16

30

40

18

25

50

70

3/8

55

73

35

50

90

125

7/16

85

115

50

70

140

190

1/2

130

175

80

110

220

300

9/16

190

260

110

150

310

420

5/8

260

355

160

245

430

585

3/4

450

610

270

365

750

1015

7/8

730

990

440

600

1210

1640

1

1090

1480

650

880

1320

2465

1-1/8

1550

2100

930

1260

2580

3500

1-1/4

2180

2955

1310

1780

3640

4935

*drilled and tapped

95

Metric Bolt and Cap Screw Torque Values Size

Class 4.8

Class 8.8 and 9.8

Class 10.9

Class 12.9

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

M6

4.8

3.5

6

4.5

9

6.5

11

8.5

13

9.5

17

12

15

11.5

19

14.5

M8

12

8.5

15

11

22

16

28

20

32

24

40

30

37

28

47

35

M10

23

17

29

21

43

32

55

40

63

47

80

60

75

55

95

70

M12

40

29

50

37

75

55

95

70

110

80

140

105

130

95

165

120

M14

63

47

80

60

120

88

150

110

175

130

225

165

205

150

260

190

M16

100

73

125

92

190

140

240

175

275

200

350

225

320

240

400

300

M18

135

100

175

125

260

195

330

250

375

275

475

350

440

325

560

410

M20

190

140

240

180

375

275

475

350

530

400

675

500

625

460

800

580

M22

260

190

330

250

510

375

650

475

725

540

925

675

850

625

1075

800

M24

330

250

425

310

650

475

825

600

925

675

1150

850

1075

800

1350

1000

M27

490

360

625

450

950

700

1200

875

1350

1000

1700

1250

1600

1150

2000

1500

M30

675

490

850

625

1600

950

1650

1200

1850

1350

2300

1700

2150

1600

2700

2000

M33

900

675

1150

850

1750

1300

2200

1650

2500

1850

3150

2350

2900

2150

3700

2750

M36

1150

850

1450

1075

2250

1650

2850

2100

3200

2350

4050

3000

3750

2750

4750

3500

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, these should only be tightened to strength of original.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Tighten plastic insert or crimped type steel locknuts to approximately 50% of dry torque indicated on chart.

Apply torque to the nut - not the bolt head. Tighten toothed or serrated type locknuts to full torque value.

LUBRICATED means coated with lubricant. DRY means plain or zinc plated without any type of lubricant.

96

Hydraulic Cylinder Bolt Torque Chart Bolt Size (inch)

Bolt Part No.

Cylinder Repair Kit Part No.

Torque (ft•lb)

Torque (N•m)

1/2

106-096

190-165

90-100

120-135

5/8

106-097

190-166 & 190-169

180-200

245-270

3/4

106-098

190-167 & 190-170

290-325

395-440

7/8

106-122

190-172 & 190-174

410-640

550-625

1

106-145

190-175 & 190-189

630-700

855-950

1-1/8

106-146

190-177

770-850

1045-1170

As a general rule: •

1/2-inch bolts are used in cylinders with 1-inch rods

•

5/8-inch bolts are used in cylinders with 1 1/4-inch rods

•

3/4-inch bolts are used in cylinders with 1 1/2-inch rods

•

7/8-inch bolts are used in cylinders with 1 3/4-inch rods

•

1-inch bolts are used in cylinders with 2-inch rods (one with 1 3/4-inch)

•

1-1/8-inch bolts are used in cylinders with 2-1/4-inch rods

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and torque to value shown on chart.

SAE & ORS Hydraulic Fitting Replacement O-Ring Chart Fraction Size

Dash Size

SAE (Port Seal O-Ring)

ORS (Face Seal O-Ring)

Thread Size

O-Ring P/N

Thread Size

O-Ring P/N

1/16

1

NA

NA

NA

NA

1/8

2

5/16 - 24

NA

NA

NA

3/16

3

3/8 - 24

NA

NA

NA

1/4

4

7/16 - 20

155-760

9/16 - 18

157-037

5/16

5

1/2 - 20

NA

NA

NA

3/8

6

9/16 - 18

155-705

11/16 - 16

157-038

1/2

8

3/4 -16

155-706

13/16 - 16

157-039

5/8

10

7/8 - 14

155-707

1 - 14

157-040

3/4

12

1-1/16 - 12

155-709

1-3/16 - 12

157-017

7/8

14

1-3/16 - 12

155-747

NA

NA

1

16

1-5/16 - 12

155-748

1-7/16 - 12

155-714

1-1/4

20

1-5/8 - 12

155-702

1-11/16 - 12

NA

1-1/2

24

1-7/8 - 12

157-001

2 -12

NA

2

32

2-1/2 - 12

NA

NA

NA

2-1/2

40

3 - 12

NA

NA

NA

3

48

3-1/2 - 12

NA

NA

NA

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current CMW part numbered o-ring, or dash size does not occur in current CMW applications SAE = straight thread fitting that seals by sandwiching a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORS = o-ring face seal; a type of fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface

97

98

99

Parts Manual Change Request (Please print clearly)

Date: _______________________

Dealer No. (required): _____________________________

Your Name: _____________________________ Phone: _________________

Position: _____________________________

Fax: _________________

E-mail: __________________

Publication Information: Parts Manual No.: _____-_____

Model: __________

Illustration Part No.: Manual Page No.: 1. _____-_____ .......................................................... 1. __________ 2. _____-_____ .......................................................... 2. __________ 3. _____-_____ .......................................................... 3. __________ Nature of Change Request:

 Text

 Graphics

 Missing Information

Describe change requested (if possible, include copy of publication page with changes marked.): ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ Please fax completed form to Parts Manual Department (580) 572-3525 Thank you for taking the time to submit this request. We will contact you if further information is needed to process your request.

ID0135001

100

101

ID0040564

102

ID0135281