Ditch Witch H400 Series Carrier Attachments Parts Manual 053-406 PDF

H400 Series Parts Manual

Issue 12

053-406

1

H400 Series ISSUE NO. 12PL-09/20 For Replacement Copy Order P/N 053-406

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works

This manual contains information concerning the following models: H411, H412 Trencher, H431 Plow, H450 Combo & RLCR45 Reel Carrier Attachments Attachments for - 4500

Copyright 1992, 1993, 1994, 1995, 1996, 2005, 2007, 2012, 2016, 2017, 2018, 2019, 2020 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Modularmatic, Jet Trac, Roto Witch, Subsite, Fluid Miser, Perma-Soil, Power Pipe, Super Witch, Super Witch II, Pierce Arrow, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY ______________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy July 2019

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse (including, but not limited to, rollover), abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 07

ID0134872

5

Digging Attachments

4500 Tilt Adapter Kit – Adapter Frame ......... 22 4500 Tilt Adapter Kit – Hydraulics ............... 24 Adapter Frame – H412 ............................... 20 Attachment Frame – H311/H411................. 40 Attachment Frame – H312/H412................. 42 Auger and Outboard Bearing .................... 52 Decal Kit – H411 ........................................... 8 Decal Location – H400 ...........................16, 18 Decal Location – H412 ................................ 12 Digging Chain Drive Hydraulics – H411 ...... 66 Digging Chain Drive Hydraulics – H412 ...... 68 Counterweight, Front................................ 54 H412 Heavy Duty Slide Frame .................. 36 H412 Heavy Duty Slide Trolley .................. 34 H412 Slide Hydraulics ............................... 30 H412 Slide Kit – Attachment Mount .............. 28 H412 Slide Kit – Frame Mount...................... 26 Headshaft and Sprocket – H411 ................. 50 Headshaft and Sprocket ............................ 48 Hydraulic Cylinder – 2.5” x 1.5” x 24” ........... 38 Hydraulic Cylinder – 3” x 1.5” x 3” ............... 32 Hydraulic Cylinder – 3” x 1.75” x 12” ............ 62 Hydraulic Motor ........................................ 70 Hydraulic Schematic.................................. 56 Pivot Bearings ........................................... 46 Pivot Lift Hydraulics – H311/H411 ............... 60 Pivot Lift Hydraulics – H412 ....................... 58 Pivot Lift .................................................... 64 Pivot .......................................................... 44 Solenoid Hydraulics................................... 72

Vibratory Plow

Adapter Frame – H431 ............................... 82 Adapter Frame – H450 ............................... 84 Attachment Frame – H450 ......................... 86 Attachment Lift Hydraulics ..................... 124 Attachment Swing Hydraulics ................. 122 Boom Lift Hydraulics ............................... 120 Combo Chain Drive Hydraulics ............... 106 Combo Selector Hydraulics ..................... 104 Decal Kit – H431 ......................................... 76 Decal Location – H450 ................................ 78 Electrical Diagram ................................... 126 Feed Blades ............................................... 98 Float Blades ............................................. 100 Hydraulic Cylinder – 2.5” x 1.25” x 3” ......... 116 Hydraulic Cylinder – 3” x 1.5” x 10” ............ 118 Hydraulic Schematic................................ 102 Pilot Pressure Hydraulics ........................ 108 Plow Hydraulics ....................................... 114 Plow Weight Rack – H431 .......................... 88 Pull Blades ................................................. 96 Skid Shoes ................................................. 94 Trolley ....................................................... 90 Vibrator Drive Hydraulics – H431 ............. 110 Vibrator Drive Hydraulics – H450 ............. 112 Vibrator ..................................................... 92

6

Booms, Digging Chains, Auger Parts, Restraint Bars, Trench Cleaners

Auger ....................................................... 146 Bit Puller, Alligator .................................. 184 Bit Punch, Alligator.................................. 186 Boom ....................................................... 138 Chain Jaws ............................................... 188 Chain, Alligator – 2P................................. 172 Chain, Alligator – 3.067P........................... 178 Chain, Alligator/Duratooth – 2P .............. 160 Chain, Digging – 2P50K2PS ........................ 166 Chain, Digging – 2P50K4PS ........................ 168 Chain, Digging – 2P .................................. 170 Chain, Digging – 3.067P .................... 174, 176 Chain, Duratooth – 2P ............................. 158 Chain, Duratooth – 4P ............................. 156 Chain, Premium Alligator ........................ 180 Chain, Shark ............................................ 182 Chain, Shark/Alligator – 2P ...................... 164 Chain, Shark/Duratooth – 2P ................... 162 Electrical Diagram – H450 ........................ 190 Grease Cylinder ............................... 142, 144 Low Headshaft ........................................ 134 Personnel Restraint – 2P ......................... 148 Personnel Restraint – 3P ......................... 150 Roller Boom – 3” Pitch .............................. 132 Roller Boom 3P........................................ 136 Roller Boom, Large Tail ........................... 130 Sprocket 2P & 3P..................................... 140 Trench Cleaner – 2P ................................. 152 Trench Cleaner – 3P ................................. 154

Reel Carrier

Cable Guide Assembly............................. 196 Electrical Diagram ................................... 208 Hydraulic Control Valve ......................... 204 Hydraulic Schematic................................ 210 Reel Carrier Cable Guide Mount ............. 198 Reel Carrier Hydraulics – RLCR45 .............. 200 Reel Carrier Hydraulics – Tractor .............. 206 Reel Carrier Lift Cylinder ......................... 202 Reel Carrier ............................................. 194

Miscellaneous

Bolt/Nut Torque Chart ............................ 214 Replacement O-Ring Chart ..................... 219 Warranty Registration ............................ 222

7

DIGGING ATTACHMENTS

8

DECAL KIT H411

1 2

1 2 5 6

45 3

03

4

2

ID0140520

9

DECAL KIT H411

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

275-631 274-196 274-002 275-043 275-230 275-231 275-232 275-233

QTY

2 3 1 4 4 1 2

DESCRIPTION

REMARKS

H411 DECAL KIT H411 MODEL-ID DANGER CHAIN & AUGER CHAIN TENSION WARNING STRIPE (1-3/4 X 18) WARNING STRIPE (2-3/4 X 18) DANGER (1-3/4 X 18) DANGER (2-3/4 X 18)

INCLU. REF. NO.'S 1 THRU 7

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0140520

10

DECAL KIT H411

2

2.5 6

1.0

1.0

4

4

4

2.00 6 4 7 2.5

2.00 6

6

5 4

1.00 4

7 5

03

ID0140520

11

12

DECAL LOCATION H412

2

1 12

2 1 11 4

6 8

10

5 7 9 1 3

05

4

ID0091350

13

DECAL LOCATION H412 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12

05

274-605 274-002 274-096 275-043 273-059 275-231 273-058 275-233 274-442 274-738 274-748 274-753 274-787

QTY

DESCRIPTION

REMARKS

3 2 1 4 4 1 2 3 1 1 1 1

DECAL KIT - H412 DANGER CHAIN AND AUGER H412 MODEL - ID CHAIN TENSION DANGER STRIPE ( 1.50” X 18” ) DANGER STRIPE ( 2.75” X 18” ) DANGER ( 1.50” X 18” ) DANGER ( 2.75” X 18” ) LIFT - POINT LOCATION DIGGING BOOM FUNCTION ATTACHMENT SLIDE DIGGING INSTRUCTIONS NOTICE, LUBRICATION

( MODEL 5000 ) ( MODEL 5000 ) ( MODEL 5000 ) ( MODEL 5000 )

ID0091350

14

DECAL LOCATION H412

05

ID0091350

15

DECAL LOCATION H412 4

4

4

4

4 4

.5

.5

.5

.5

.5

.5

.75

1

.75

1.00

.25

.25 .75

2.5

5

.25

5 .25

.25

1.0

6

2.25

4

4 4

.25 13.00

.25

7 12.00

4

5 5

05

ID0091350

16

DECAL LOCATION H400 GRAY

2 1

R E G N A D 3

02

ID0549771

17

DECAL LOCATION H400 GRAY REF PART NO. NUMBER

270-8068 1 701-097 2 270-7953 3 270-7947

QTY

DESCRIPTION

3 2 2

H400 GRAY SERVICE DECAL KIT ISO DANGER CHAIN & AUGER H400 MODEL-ID CHAIN TENSION ISO

REMARKS

FOOTNOTES

02

ID0549771

18

DECAL LOCATION H400

1

3 4 5

2

5 5 .25” .25”

2.5”

2.5” .25”

.25” 2.5” 2.5”

4 4

07

ID0132426

19

DECAL LOCATION H400 REF PART NO. NUMBER

1 2 3 4 5

275-668 274-211 270-6475 275-043 275-097 273-059 273-058

QTY

DESCRIPTION

2 2 2 3 4 1

DECAL KIT - H400 H400 MODEL-ID H400 MODEL-ID CHAIN TENSION DANGER CHAIN & AUGER DANGER STRIPE (1.50” X 18”) DANGER (1.50” X 18”)

REMARKS

OLD STYLE NEW STYLE

FOOTNOTES

07

ID0132426

20

21

22

23

24

25

26

H412 SLIDE KIT FRAME MOUNT

2

3

5

4

1

3 15 13

7 6 8

10 9

12 11 14

02

ID0140909

27

H412 SLIDE KIT FRAME MOUNT REF PART NO. NUMBER

QTY

DESCRIPTION

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

13.

14.

15.

1 1 2 1 1 1 3 1 3 4 6 3 3 1

TAPERED PIN (1.5 X 6.1") CYLINDER (2.5 X 1.5 X 24.0") COMPOSITION BUSHING TAPERED INSERT (1.5) FLG BOLT (5/8-NC X 1-1/2") CYLINDER MOUNT ASSEMBLY FLG LK BOLT (1/2-NC X 1-1/4") SLIDE MOUNT WELDMENT FLG LOCKNUT (5/8-NC X 2-1/2") FLG BOLT (5/8-NC X 2-1/2") FLG LOCKNUT (5/8-NC) BOLT (5/16-NC X 1-1/2" FLT CSK ALN) FLG LOCKNUT (5/16-NC) WEAR PLATE

183-627 151-090 125-772 181-974 105-969 317-463 105-830 317-467 105-833 105-303 105-994 106-823 105-003 317-485

REMARKS

NOT SHOWN:

FOOTNOTES:

100-465 HYDRAULICS SLIDE KIT INCLUDES REF NO'S 1-12, 1-7 ON PAGE 803-189 AND 1-6 ON PAGE 803-190.

NOTE:

02

ID0140909

28

29

30

31

32

HYDRAULIC CYLINDER 3" X1.5" X3"

2

1 3 4 5

6

7

01

ID0140142

33

HYDRAULIC CYLINDER 3" X1.5" X3" REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

151-049 190-167 150-911 150-299 106-098 150-777 150-774 150-431

NOT SHOWN:

259-040 259-237 259-065 259-066 259-188

QTY

1 1 1 1 1 1 1

DESCRIPTION

REMARKS

HYDRAULIC CYLINDER SEAL REPAIR KIT LOCK RING (3") CYLINDER BARREL FLG BOLT (3/4-NC X 2",GD 8) PISTON CYLINDER HEAD CYLINDER ROD

INCL REF NO.'S 1 THRU 7

SEE FOOTNOTE 1

ROD U-SEAL INSTALLER ROD WIPER INSTALLER PISTON SEAL INSTALLER PISTON INSTALLER CYLINDER HEAD SPANNER WRENCH

FOOTNOTES:

1-USE LOCTITE 277; TORQUE TO 290-325 FT LBS (395-440 N.M)

NOTE:

01

ID0140142

34

35

36

37

38

39

40

41

42

43

44

PIVOT

H311, H312, H350, H411, H412, H450

1

7

5

8

3

1 1

13 11 10

6

4

2

13

7 3 9 12 19

1 14

15 16 18 06

17 ID0127471

45

PIVOT

H311, H312, H350, H411, H412, H450 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

105-994 105-969 105-970 106-191 106-028 115-001 140-540 143-116 143-184 145-845 145-810 145-852 145-980 181-975 183-589 313-079 322-952 115-291 156-228 116-468 105-283 115-003 125-644

QTY

6 1 4 2 2 2 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1

DESCRIPTION

FLG LOCKNUT (5/8-NC) FLG BOLT (5/8-NC X 1-1/2", GD 8) FLG BOLT (5/8-NC X 1-3/4", GD 8) BOLT (5/8-NC X 6", GD 8) FLG BOLT (5/8-NC X 5", GD8) ZERK (02N) BOOM STUB 2P BOOM STUB 3P BOOM STUB 2P, (3P-H411, H412) PIVOT PIVOT CLAMP PLATE PIVOT SLEEVE TAPERED INSERT TAPERED PIN PIVOT CAP PIVOT CAP SHIM NIPPLE (1/8-NPT X 2.5") ELBOW (02N90) LUBRICATION HOSE (02N, 24") LOCKNUT (02NF) ZERK (1/4-NF) GROOVED PIVOT SLEEVE

REMARKS

SEE FOOTNOTE 5 SEE FOOTNOTE 4 SEE FOOTNOTE 4,7 SEE FOOTNOTE 3, ROLLER BOOMS ONLY SEE FOOTNOTE 4, ALL STANDARD BOOMS ONLY SEE FOOTNOTE 4,5 SEE FOOTNOTE 3 SEE FOOTNOTE 8

SEE FOOTNOTE 8 SEE FOOTNOTE 1 & 6 SEE FOOTNOTE 1 & 6 SEE FOOTNOTE 1, 2 & 6 SEE FOOTNOTE 1, 2 & 6 SEE FOOTNOTE 1, 2 & 6

NOT SHOWN:

1. S/N 8J0082-8K0229 (H312), S/N 8J0094(H412), S/N 8JO522(H450), S/N 8J0070-8K0125 (H311).

2. BEGIN WITH S/N 8J0070 (H311), S/N 8J0082 (H312), S/N 8J0522 (H450), S/N 8K0252 (H411), FOOTNOTES: S/N 8J0094 (H412).

3. ENDS WITH S/N 8K0125 (H311) 4. BEGINS WITH S/N 8K0126 (H311), S/N 8K0252 (H411) 5. H312, H412, H450 6. LUBRICATION ARRANGEMENT (REF.#'S 14 THRU 18) WAS NOT ON EARLY LIP SEAL OR MECHANICAL SEAL UNITS. UPGRADE FROM MECHANICAL SEAL TO GREASE CAVITY ARRANGEMENT BY ORDERING CONVERSION KIT: 190-190 FOR H311, 190-191 FOR H312 & 2P H412, 190-192 FOR H450, AND 190-193 FOR 3P H412.

REFER TO REPLACEMENT DIAGRAM 052-209, HEADSHAFT AND SPROCKET PAGE, AND PIVOT BEARING PAGE. NOTE: 7. USED FOR ROLLER BOOMS, 4' & 5' 2P OR 3P STANDARD BOOMS. 8. GREASE CAVITY STYLE MUST HAVE SLOTS AVAILABLE IN THEM.

06

ID0127471

46

PIVOT BEARINGS

H311, H312, H411, H412, H450

1

FOOTNOTE 1

3

5

2 6 7 4

01

ID0141302

47

PIVOT BEARINGS

H311, H312, H411, H412, H450 REF PART NO. NUMBER

QTY

DESCRIPTION

1. 115-492 1 INTERNAL SNAP RING 2. 125-258 1 BEARING RACE 3. 125-259 1 BEARING 4. 126-006 1 TAPERED BEARING 5. 157-555 1 INTERNAL SEAL 157-564 1 INTERNAL SEAL 157-583 1 INTERNAL SEAL 6. 157-582 2 INTERNAL SEAL 7. 125-288 1 BEARING RACE

REMARKS

SEE FOOTNOTE 1

SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

190-762

PIVOT BEARING/SEAL REPAIR KIT

FOOTNOTES:

1. EARLY STYLE ENDS WITH S/N 8G0694 (H311) ONLY *2. FOR MECHANICAL SEAL MODELS S/N 8G0695 THRU 8J0069 (H311), 8G0695 THRU 8J0081 (H312), 8H0319 THRU 8J0042 (H412). NO H450 UNITS OR H411 UNITS, REFER TO SERVICE BULLETIN 052-203.

3. PRESENT PRODUCTION BEGINS WITH S/N 8J0070 (H311), 8J0082 (H312), 8J0094 (H412), 8J0522 (H450), H411.

NOTE:

* UPGRADE FROM MECHANICAL SEAL TO GREASE CAVITY ARRANGEMENT BY ORDERING CONVERSION KIT: 190-190 FOR H311, 190-191 FOR H312 AND 2P H412, 190-192 FOR H450. REFER TO REPLACEMENT DIAGRAM 052-209, PIVOT PAGE, HEADSHAFT AND SPROCKET PAGE.

01

ID0141302

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

DIGGING CHAIN DRIVE HYDRAULICS H411

8

10 "C"

12 "D"

"A" HYDROSTAT FORWARD TO HYDRAULIC MANIFOLD VALVE

5 9

7 6

"B"

"A"

4

11 "C"

1

6

"D"

2

MOTOR FLUSH TO HYDROSTAT PUMP

HYDROSTAT REVERSE TO HYDRAULIC MANIFOLD VALVE "B" CASE DRAIN TO RESERVOIR

3 13

03

ID0109793

67

DIGGING CHAIN DRIVE HYDRAULICS H411

REF PART NO. NUMBER

1.

QTY

150-4390 1 158-721 1 500-547 1 500-1934 8 500-1935 8 2. 106-117 10 3. 157-026 1 4. 154-284 1 5. 154-261 1 6. 154-371 2 7. 154-885 1 8. 115-789 1 9. 154-884 1 10. 154-695 1 11. 154-886 1 12. 154-255 1 13. 105-1087 2

DESCRIPTION

REMARKS

HYDRAULIC MOTOR HYDR MOTOR HIGH TORQUE SEAL KIT PISTON PISTON RING SCREW (M12-1.75 X 80MM) O-RING (D70) CONN (08O-08S) 45 CONN (04O-04S) CONN (16O - 12S45) HOSE (16OFX- 62"- 5000 ) ABRASION SLEEVE (3.66 X 54") HOSE (08OFX- 60"-3000 ) HOSE (04OFX-66"-3000 ) HOSE (16OFX-66"-3000 ) UNION (04Om-04OF90) SET SCREW (M12-1.75 X 12MM)

SEE FOOTNOTE 2, 3, 4, AND 5.

SEE FOOTNOTE 1 INCLUDES PISTON RINGS SEE FOOTNOTE 2, 3, AND 4.

SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1. HIGH TORQUE MOTOR USED ON H412 & H411 WITH 70K DIG CHAIN ONLY. 2. REPLACES 158-704 HYDRALIC MOTOR, 158-704 REQUIRES 12X 106-117 BOLT (M12-1.75 X 80MM).

3. PLUG UNUSED THREADED HOLES WITH 2X 105-1087 SET SCREW (M12-1.75 X 12MM) (N/A WITH 158-704 HYDRAULIC MOTOR).

4. INSTALL BOLTS WITH SILICONE, TORQUE TO 95 FT/LBS. 5. FOR 150-4390 USE SEAL KIT 500-3455, FOR 158-704 USE SEAL REPAIR KIT 500-547.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

03

ID0109793

68

DIGGING CHAIN DRIVE HYDRAULICS H412

8

10 12 "D"

HYDROSTAT FORWARD TO HYDRAULIC MANIFOLD VALVE "A"

5 9

7 "A"

"B"

6

4

11 HYDROSTAT REVERSE TO HYDRAULIC MANIFOLD VALVE

6 "C"

1

2

MOTOR FLUSH "B" TO HYDROSTATIC PUMP

"C" CASE DRAIN TO RESERVOIR "D"

3 13

06

ID0127654

69

DIGGING CHAIN DRIVE HYDRAULICS H412

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

QTY

150-4390 1 158-721 1 500-547 1 500-1934 8 500-1935 8 106-117 10 157-026 1 154-233 1 154-261 1 154-306 2 154-885 1 115-789 1 154-884 1 154-883 1 154-886 1 154-255 1 105-1087 2

DESCRIPTION

REMARKS

HYDRAULIC MOTOR HYDRAULIC MOTOR SEAL KIT PISTON PISTON RING SCREW (M12-1.75 X 80MM) O-RING (-172 D70) CONNECTOR (080-08S) CONNECTOR (04O-08S) CONNECTOR (12S-16O) HOSE (16OFX-62"-5000) ABRASION SLEEVE (3.66 X 54") HOSE (08OFX/90-60"-3000) HOSE (04OFX/90-66"-3000) HOSE (16OFX-66"-4000) UNION (04O-04OM90) SET SCREW (M12-1.75 X 12MM)

SEE FOOTNOTE 2, 3, 4, AND 5 HIGH TORQUE SEE FOOTNOTE 1 INCLUDES PISTON RINGS SEE FOOTNOTE 2, 3, AND 4

SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1. HIGH TORQUE MOTOR USED ON H412 WITH 70K DIG CHAIN ONLY. CONVERT STANDARD 158-704 MOTOR TO OPTIONAL HIGH TORQUE MOTOR WITH 500-547 SEAL KIT AND 500-708 CAM RING. 2. REPLACES 158-704 HYDRALIC MOTOR, 158-704 REQUIRES 12X 106-117 BOLT (M12-1.75 X 80MM).

3. PLUG UNUSED THREADED HOLES WITH 2X 105-1087 SET SCREW (M12-1.75 X 12MM) (N/A WITH 158-704 HYDRAULIC MOTOR).

4. INSTALL BOLTS WITH SILICONE, TORQUE TO 95 FT/LBS. 5. FOR 150-4390 USE SEAL KIT 500-3455, FOR 158-704 USE SEAL REPAIR KIT 500-547.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF SAE AND ORS O-RING.

06

ID0127654

70

71

72

73

74

NOTES:

ID0134963

75

VIBRATORY PLOW

76

DECAL KIT H431

1

2

01

ID0141201

77

DECAL KIT H431

REF PART NO. NUMBER

1.

2.

803-056 274-173 275-023

QTY

2 1

DESCRIPTION

REMARKS

LOCATION DIAGRAM H431 R MODEL I-D OIL LEVEL

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0141201

78

DECAL LOCATION H450

7

3 1

5 2

6

4

8

02

ID0091348

79

DECAL LOCATION H450

1

1.0” 12.25”

6.5”

6 2.25” .5” .5”

1

.25” 13.00” .25” 7 .25”

12.00” 6 .75”

.25”

7

2.25” 6

02

ID0091348

80

DECAL LOCATION H450

REF PART NO. NUMBER

1 2 3 4 5 6 7 8

02

275-604 274-002 274-094 274-095 275-023 275-043 275-230 275-232 275-284

QTY

DESCRIPTION

2 1 2 1 1 4 1 1

DECAL KIT - H450 DANGER CHAIN AND AUGER SELECTOR-PLOW AND DIG H450 - MODEL ID OIL LEVEL CHAIN TENSION WARNING STRIPE ( 1 - 3/4” X 18” ) DANGER ( 1-3/4” X 18” ) AMPLITUDE CHART

REMARKS

ID0091348

81

82

ADPATER FRAME H431

5

3 6

2 4

1

01

ID0150238

83

ADPATER FRAME H431

REF PART NO. NUMBER

QTY

DESCRIPTION

1.

2.

3.

4.

5.

6.

1 3 8 8 1 3

ADAPTER FRAME FLG BOLT (5/16-NC X 1") FLG LOCKNUT (5/8-NC) FLG BLT (5/8-NCX1-3/4",GD 8) PLOW FRAME COVER CLIP NUT (5/16-NC)

328-038 105-873 105-994 105-970 362-672 105-137

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0150238

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

FEED BLADES

2

1 10 3

5

4

6 7

11

8

9

08

ID0055434

99

FEED BLADES REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

106-021 106-022 106-024 106-023 186-450 186-773 186-502 186-780 186-594 186-457 186-509 186-523 186-465 186-473 186-516 186-819 186-835 186-530 186-804 186-805 186-591 186-455 186-507 186-521 186-463 186-514 186-885 186-886 185-202 185-234 185-206 185-233 185-237 110-368 110-833 186-528

QTY

DESCRIPTION

REMARKS

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

WING BOLT (3/8-NC X 1-1/4") WING BOLT (3/8-NC X 1-3/4") WING BOLT (3/8-NC X 2-1/2") WING BOLT (3/8-NC X 2") CABLE GUIDE (3/8" X 1-1/2" X 12") CABLE GUIDE (1/2" X 1-1/2" X 12") CABLE GUIDE (3/8" X 1-1/2" X 18") CABLE GUIDE (1/2" X 1-1/2" X 18") CABLE GUIDE (.75" X 3" X 6") CABLE GUIDE (.75" X 3" X 12") CABLE GUIDE (.75" X 3" 18") CABLE GUIDE (.75" X 3" X 24") CABLE GUIDE (.75" X 7.5" X 12") CABLE GUIDE (1" X 10" X 12") CABLE GUIDE (.75" X 7.5" X 18") CABLE GUIDE (1" X 7.5" X 24") CABLE GUIDE (1.5" X 6.75" X 24") CABLE GUIDE (1" X 10" X 18") SPEED FEED BLADE (.5" X 1.5" X 12") FEED FEED BLADE (.5" X 1.5" X 18") FEED BLADE (.75" X 3" X 6") FEED BLADE (.75" X 3" X 12") FEED BLADE (.75" X 3" X 18") FEED BLADE (.75" X 3" X 24") FEED BLADE (.75" X 7.5" X 12") FEED BLADE (.75" X 7.5" X 18") FEED BLADE (1" X 7.5" X 24") FEED BLADE (1.5" X 6.7" X 24") FEED BLADE (.75" X .31" X 9.5") FEED BLADE (.75" X .31" X 16") CABLE GUIDE (.75" X .31" X 9.5") CABLE GUIDE (.75" X .31" X 16") CABLE GUIDE (.75" X .75" X 18") SNAPPER PIN (3/8" X 1-1/2") SNAPPER PIN (3/8" X 2-3/4") FEED BLADE (1" X 10" X 18")

FOR 3/8" IM BLADE SEE FOOTNOTE 6 FOR 1/2" IM BLADE SEE FOOTNOTE 6 FOR 3/4" IM BLADE SEE FOOTNOTE 6 FOR 1" IM BLADE SEE FOOTNOTE 6 USE WITH 186-448 FEED BLADE USE WITH 186-765 & 186-804 FEED BLADE USE WITH 186-500 FEED BLADE USE WITH 186-774 & 186-805 FEED BLADE USE WITH 186-591 FEED BLADE USE WITH 186-455 FEED BLADE USE WITH 186-507 FEED BLADE USE WITH 186-521 & 186-880 FEED BLADE USE WITH 186-463 FEED BLADE USE WITH 186-471 FEED BLADE USE WITH 186-514 FEED BLADE USE WITH 186-528 FEED BLADE USE WITH 186-885 FEED BLADE USE WITH 186-886 FEED BLADE INCL REF NOS 1 & 2 SEE FOOTNOTE 1 & 2 INCL REF NOS 1 & 2 SEE FOOTNOTE 1 & 2 INCL REF NOS 1 & 3 SEE FOOTNOTE 1 INCL REF NOS 1 & 3 SEE FOOTNOTE 1 INCL REF NOS 1 & 3 SEE FOOTNOTE 1 INCL REF NOS 1 & 3 SEE FOOTNOTE 1 INCL REF NOS 1 & 4 SEE FOOTNOTE 1 INCL REF NOS 1 & 4 SEE FOOTNOTE 1 INCL REF NOS 1 & 4 SEE FOOTNOTE 1 INCL REF NOS 1 & 4 SEE FOOTNOTE 1 INCL REF NOS 1 & 9 SEE FOOTNOTE 3 INCL REF NOS 1 & 9 SEE FOOTNOTE 3

SEE FOOTNOTE 4 SEE FOOTNOTE 5 SEE FOOTNOTE 5 INCL REF NOS 1 & 4

SEE FOOTNOTE 1

FOOTNOTES

1. USE OF THESE BLADES ON THE H532, H552 OR M552 REQUIRES (2) 1-3/8" DIAMETER PINS (183-626) AND THE REPLACEMENT OF THE EXISTING STEEL SPRING BUSHINGS IN THE VIBRATOR BLADE MOUNT WITH (4) 1-3/8" ID STEEL SPRING BUSHINGS (125-789).

2. SPEED BLADES ARE INTENDED FOR STRAIGHT OR GENTLY CURVING PLOW RUNS. THEY SHOULD NOT BE USED IN RUNS REQUIRING SHARP TURNS. 3. THESE BLADES HAVE A VERY SMALL RADIUS (.31") AND A DEEPER CHUTE OPENING FOR MULTIPLE CABLES. 4. THIS GUIDE ONLY WORKS WITH FEED BLADE 185-234. IT LOWERS THE EXIT POINT TWO INCHES. 5. USE WITH BLADES NOT HAVING WELD-ON WING BOLT NUTS. 6. USE WITH BLADES USING WELD-ON WING BOLT NUTS. NOTE:

LENGTH (L) REFERS TO COVER DEPTHS. FEED BLADES (WHICH HAVE FIXED FEED TUBES) HAVE MEASUREMENTS OF THE SPACE BETWEEN FEED TUBES SIDES REFERRED TO AS INSIDE MEASUREMENT (IM). CABLE GUIDE THICKNESS (THK) MEASUREMENTS REFER TO A MEASUREMENT FROM EDGE TO EDGE AND CORRESPOND TO THE INSIDE MEASUREMENTS (IM) OF THE FEED BLADES THEY ARE USED WITH.

08

ID0055434

100

101

102

103

104

105

106

COMBO CHAIN DRIVE HYDRAULICS H450

PLOW RETURN

4

TO PLOW MOTOR

9 13

TO RETURN TRACTOR

12 10

7

11 1

14

8 21

TO PRESSURE TRACTOR DRIVE

15 2

5

20 3 22

19

17 18 16

TO TRACTOR CHARGE PRESSURE (PILOT)

6

03

ID0084570

107

COMBO CHAIN DRIVE HYDRAULICS H450

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

QTY

DESCRIPTION

150-4390 1 HYDRAULIC MOTOR 500-547 SEAL REPAIR KIT 158-591 1 SOLENOID CONTROL VALVE 105-079 LOCKWASHER (1/4") 117-017 COMPRESSION SPRING 500-698 SPRING HOUSING 500-700 SOLENOID HOUSING 501-172 BOLT (1/4-NC X‡", ALN HD) 157-026 1 O-RING (172 D70) 156-478 1 HYD. LINE (1.OO") 154-849 1 HOSE (16OFX-22.5"-5000) 154-706 1 HOSE (04OFX-04OFX90-40"-3000) 154-850 1 HOSE (16OFX-16OFX90L-28.5"-4000) 154-851 1 HOSE (12OFX-12OFX45-50"-4000) 154-852 1 HOSE (12OFX-62"-4000) 154-378 1 REDUCER (12O-16OF) 154-409 1 UNION RUN TEE (16OFX-16O-16O) 154-406 1 CONNECTOR (12S-16O90-04SF) 154-306 1 CONNECTOR (16O-12S) 154-407 1 CONNECTOR (16S-16O90) 154-367 1 CONNECTOR (12O-16S) 154-263 1 CONNECTOR (04O-04O45) 154-287 1 CONNECTOR (16O-16S90) 105-089 1 LOCKNUT (5/16-NC) 105-117 2 WASHER (5/16") 105-033 2 BOLT (5/16-NC X 2", GD8) 106-117 10 BOLT (M12-1.75 X 80mm) 105-1087 2 SET SCREW (M12-1.75 X 12MM)

REMARKS

SEE FOOTNOTE 1, 2, 3, AND 4

SPOOL RETURN

INCL. WASHER

SEE FOOTNOTE 1, 2, AND 3 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. REPLACES 158-704 HYDRAULIC MOTOR, 158-704 REQUIRES 12X 106-117 BOLT (M12-1.75 X 80MM).

2. PLUG UNUSED THREADED HOLES WITH 2X 105-1087 SET SCREW (M12-1.75 X 12MM) (N/A WITH 158-704 HYDRAULIC MOTOR. 3. INSTALL BOLTS W/ SILICONE, TORQUE TO 95 FT/LBS. 4. FOR 150-4390 USE SEAL KIT 500-3455, FOR 158-704 USE SEAL REPAIR KIT 500-547.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

03

ID0084570

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

ATTACHMENT SWING HYDRAULICS

FOOTNOTE 2

FOOTNOTE 1

B A

2 1 3 A

PLOW SWING

SWING LEFT

4 B TO INSIDE BULKHEAD

04

ID0140485

123

ATTACHMENT SWING HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

190-458 154-375 154-682 154-275 154-296

QTY

2 2 2 2

DESCRIPTION

REMARKS

ATTACHMENT SWING CONVERSION KIT CONNECTOR (04O-08S-STR, ORF) HOSE (04OFX-17"-3000) BK CONNECTOR (04O-04OBK) CAP (04OF)

INCL. REF. NO.'S 1-4

NOT SHOWN:

FOOTNOTES:

1. REFER TO PAGE ENTITLED "ATTACHMENT LIFT HYDRAULICS".

2. FOR ADDITIONAL PARTS REFER TO PAGE ENTITLED CONTROL VALVE LINKAGE.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS CONNECTOR O-RINGS.

04

ID0140485

124

125

126

127

128

NOTES:

ID0134963

129

BOOMS DIGGING CHAINS AUGER PARTS RESTRAINT BARS TRENCH CLEANERS

130

LARGE TAIL ROLLER BOOM LOW HEADSHAFT H300/H313/H400/3610

3 12 1 12 4

7 6

9 11 10 2 9

5 8

08

ID0127116

131

LARGE TAIL ROLLER BOOM LOW HEADSHAFT H300/H313/H400/3610 REF PART NO. NUMBER

QTY

DESCRIPTION

143-181 3' LT ROLLER BOOM (2"P) 143-180 4' LT ROLLER BOOM (2"P) 1. 143-138 1 3' BOOM 143-139 1 4' BOOM 2. 142-751 1 LT ROLLER (2.000"P, 14.5") 3. 151-053 1 CYL (1.5" X 1.5" X 8.375") 4. 180-448 1 IDLER SHAFT (1.25" X 3.50") 115-003 ZERK (1/4-NF, STR) 115-165 PLUG (08N, SOC) 5. 125-209 1 TAPERED BEARING/RACE (1.250") 6. 115-165 1 PLUG (08N, SOC) 7. 115-019 1 ZERK (02N) 8. 105-313 1 JAM NUT (1-1/4-NF) 9. 180-062 2 DIRT SHIELD 10. 115-276 1 REDUCER (16N-08NF) 11. 159-093 1 RELIEF VALVE (5/8-NF, 02N) 12. 115-001 2 ZERK (O2N)

REMARKS

INCL REF NO'S 1 THRU 12; USE 80P INCL REF NO'S 1 THRU 12; USE 84P USE 80P USE 84P INCL REF NO'S 5 & 9

NOT SHOWN:

FOOTNOTES:

NOTE:

08

ID0127116

132

133

134

LOW HEADSHAFT ROLLER BOOM, 3P H411

3 2 1 2 12 10

7 11

6

20

2

5

19

9 13

14

15 8

8

4 16

4

16

13 5

18

17

19 9

01

ID0140763

135

LOW HEADSHAFT ROLLER BOOM, 3P H411 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

143-182 143-183 190-183 143-145 143-146 115-001 151-053 115-470 125-216 115-165 115-019 145-589 155-852 115-276 159-093 180-441 184-067 105-377 115-152 125-265 142-756 181-697 181-699 110-220

QTY

DESCRIPTION

REMARKS

INC. REF. NO.'S 1 THRU 20. USES 52P INC. REF. NO.'S 1 THRU 20. USES 62P INC. REF. NO.'S 4, 5, 8, 9, 16, 18, & 19

1 1 3 1 2 2 1 1 2 2 1 1 1 2 1 1 2 1 1 2 AR

3' LARGE TAIL ROLLER BOOM ASS'Y 4' LARGE TAIL ROLLER BOOM ASS'Y BEARING KIT 3' BOOM 4' BOOM ZERK (O2N) CYL (1.5" X 1.5" X 8.375") INTERNAL SNAP RING RACE PLUG (O8N, ALN) ZERK (1/8-NPT, STR) POLYURETHANE SPACER EXTERNAL SEAL PIPE BUSHING CHECK VALVE TAIL SHAFT SEAL SPACER JAM NUT (1-1/2-NF) PLUG (12N, SQ) BEARING ROLLER BEARING SPACER SEAL SLEEVE MACH BUSHING (1-1/2" X 14 GA.)

INC. REF. NO.'S 2 AND 15

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0140763

136

ROLLER BOOM 3P

H400/M500/H515/H553/H813/853

2 3

1 2 12 7

15

9

11

19

10

5

2 14

13 8

6 15 4

4

16

16

8

5

13

18 17

19 9

09

ID0025106

137

ROLLER BOOM 3P

H400/M500/H515/H553/H813/853 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

QTY

143-120 143-130 143-358 143-375 190-183 143-102 1 143-101 1 143-347 1 143-370 1 115-001 3 151-053 1 115-470 2 125-216 2 110-220 AR 115-019 1 145-589 2 155-852 2 115-151 1 159-093 1 180-441 1 184-067 2 105-377 1 115-152 2 125-265 2 142-756 1 181-697 1 181-699 2

DESCRIPTION

REMARKS

LTR WEAR BAR BOOM (36" 3P) LTR WEAR BAR BOOM (48" 3P) LTR NON-WEAR BAR BOOM (48" 3P) LTR WEAR BAR BOOM (60" 3P) BEARING/SEAL REPAIR KIT BOOM 3P 3' BOOM (3P, 4') BOOM (3P, 4') 3P 5FT BOOM ZERK (O2N) CYL (1.5" X 1.5" X 8.375") INTERNAL SNAP RING (3.250") TAPERED RACE (3.265") MACH BUSHING (1-1/2", 14GA) ZERK (02N) SPACER EXTERNAL SEAL (2.250") REDUCER (16N-12NF) RELIEF VALVE (5/8-NF, 02N) IDLER SHAFT (1.500" X 4.375") SEAL SPACER JAM NUT (1-1/2-NF) PLUG (12N, SQ FM) TAPERED BEARING (1.500") LT ROLLER (3.067"C17.2") BEARING SPACER SEAL SLEEVE

INCL REF NO.'S 1 - 19, USES 52 P INCL REF NO.'S 1 - 19, USES 62 P INCL REF NO.'S 1 - 7, AND 9 - 19, USES 62 P INCL REF NO.'S 1 - 19, USES 72 P INCL REF NO.'S 4, 5, 8, 9, 16, 18, & 19

NON-WEAR BAR

DO NOT INSTALL ON THE 143-358 BOOM

NOT SHOWN:

FOOTNOTES:

NOTE:

09

ID0025106

138

139

140

SPROCKET 2P & 3P

1 (2P)

2

3 4

5 (3P)

6

7

8 08

ID0084614

141

SPROCKET 2P & 3P REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

140-654 140-707 125-209 180-062 181-051 125-209 180-448 180-534 115-165 115-003 115-009 105-313 105-377 140-656 140-723 140-661 140-661 115-470 125-265 125-266 155-843 180-026 180-243 180-244 180-440 180-441 115-009 115-001 115-003 115-152

QTY

2 1 1 2 2 1 1 1 1 1 1 2 2 2 1 1 2 1 2 2 2 2 2 1 1 1 1 1 1 1

DESCRIPTION

IDLER SPROCKET (2.000"A9) SPROCKET (2.000"A9) TAPERED BEARING/ RACE (1.250") DIRT SHIELD DIRT SHIELD TAPERED BEARING/RACE (1.250") IDLER SHAFT (1.250" X 3.500") IDLER SHAFT (1.250" X 4.375") PLUG (O8N, SOC) ZERK (1/4-NF, STR) ZERK (1/4-NF, STR XL) JAM NUT (1-1/4-NF) JAM NUT (1-1/2-NF) SPROCKET (3.067" A10) SPROCKET (3.067"A10) TAPERED BRNG/RACE (1.500") TAPERED BRNG/RACE (1.500") INTERNAL SNAP RING (3.250") TAPERED BEARING (1.500") TAPERED RACE (3.265") INTERNAL SEAL (2.474") SPACER (2.515") SEAL SPACER (1.501") BEARING SPACER (1.535") SLIDE & STOP SHAFT (4.875") IDLER SHAFT (1.500" X 4.375") ZERK (1/4-NF, STR XL) ZERK (02N) ZERK (1/4-NF, STR) PLUG (12N, SQ FM)

REMARKS

FOR 2" P FOR 2" P INCL. REF. NO. 4 SEE FOOTNOTE 1 SEE FOOTNOTE 2 FOR 2" P FOR 2" P SLIDE AND STOP FOR 2" P IDLER SPROCKET FOR 2" P EARLY STYLE FOR 2" P FOR 3" P FOR 3" P REF. NO. 5 FOR 3" P FOR 3" P

FOR 3" P SLIDE AND STOP FOR 3" P IDLER SPROCKET EARLY STYLE NON-SELF TAPPING SELF-TAPPING

NOT SHOWN:

FOOTNOTES:

1. THIS 9/32" DIRT SHIELD IS INCLUDED WITH SPROCKET AND IS USED WHEN SPROCKET IS BEING USED IN SLIDE STOP. 2. THIS 25/32" DIRT SHIELD IS NOT INCLUDED WITH SPROCKET PARTS ASSEMBLY. REPLACE SHIELD THAT COMES WITH SPROCKET PARTS ASSEMBLY WITH THIS SHIELD IF SPROCKET IS USED IN BOOM.

NOTE:

08

ID0084614

142

143

144

145

146

AUGER

17 12

3 9 13

6

16

11

2 13

4

5

1

15 6 10

16

7 1 8 14

01

2

ID0150243

147

AUGER REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

105-021 105-043 105-391 105-953 115-001 125-620 142-031 142-038 105-082 145-109 145-110 145-244 145-245 145-290 145-298 184-076 143-021 184-189 184-188

QTY

DESCRIPTION

REMARKS

8 4 2 4 2 2 1 1 4 1 1 1 1 2 2 4 2 2 1

NUT (1/2-NC) BOLT (1/2-NC X 1-1/4") BOLT (3/4-NC X 4-1/2") LOCKNUT (3/4-NC) ZERK (02N) BEARING AUGER SPROCKET (2P) AUGER SPROCKET (3P) BOLT (1/2-NC X 2-1/2") RIGHT AUGER LEFT AUGER DOUBLE AUGER SHAFT SINGLE AUGER SHAFT AUGER BEARING PLATE (2P) AUGER BEARING PLATE (3P) ZERK GUARD BUSHING ZERK GUARD SPACER SPACER

SEE FOOTNOTE 2

1

REPLACEMENT SLEEVE

NOT SHOWN:

181-831

SEE FOOTNOTE 1

FOOTNOTES:

1-USED WHEN INSTALLING ONLY ONE AUGER ON DOUBLE AUGER SHAFT. 2-USED WITH SINGLE AUGER AND SINGLE AUGER SHAFT.

NOTE:

01

ID0150243

148

PERSONNEL RESTRAINT 2P

7

OPTION 6 2

4

8

5

1 8 3

03

ID0139700

149

PERSONNEL RESTRAINT 2P

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

QTY

105-386 2 106-480 2 106-442 4 105-994 4 105-340 4 106-851 2 106-191 2 107-337 2 107-720 2 141-268 1 141-274 1 140-0008 1 141-354 1 141-350 1 141-276 1 141-371 1 141-373 1 141-277 1 141-372 1 141-374 1 141-280 1 106-949 4

DESCRIPTION

BOLT (5/8-NC X 4-1/2") SCREW (M16-2.00 X 110mm, 10.9) FLG LOCKNUT (M16-2.00, PRV TRQ) FLG LOCKNUT (5/8-NC) FLG LOCKNUT (3/4-NC) LOCKNUT (M18-2.5) BOLT (5/8-NC X 6", GD8) SCREW (M16-2.00 X 150mm, 10.9) SCREW (M18-2.5 X 160mm, 10.9) RESTRAINT BAR (46", 2P) RESTRAINT BAR (56", 2P) RESTRAINT BAR (60", 2P) RESTRAINT BAR (69", 2P) RESTRAINT BAR (80.5", 2P) LEFT MOUNT BRACKET LEFT MOUNT BRACKET (12") LEFT MOUNT BRACKET (16") RIGHT MOUNT BRACKET RIGHT MOUNT BRACKET (12") RIGHT MOUNT BRACKET (16") SUPPORT SPACER WASHER (3/4", HARDENED)

REMARKS

H313, H314, H514 M552 LOWER MOUNT BRACKET ONLY; TORQUE TO 650 FT-LBS H514 LOWER MOUNTING BOLTS H313, H314 H514, SEE FOOTNOTE 2 ROLLER BOOM ROLLER BOOM (FOR 3' AND 44" BOOM) ROLLER BOOM (FOR 4' BOOM) STANDARD BOOM "& 5'-50K ROLLER BOOM" STANDARD BOOM (FOR 5' BOOM) 3610 3610 3610 3610 SEE FOOTNOTE 1 H514, SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. WHEN H312 OR H314 ATTACHMENT IS USED IN AN OFFSET POSITION THE RIGHT MOINT BRACKET WILL BE REPLACED BY REF. NO. 7 (41-280) SUPPORT SPACER 2. EARLY PRODUCTION UNITS USED 107-688 WITH TWO HARDENED WASHERS. CURRENT PRODUCTION UNITS USE 107-720 WITH FOUR HARDENED WASHERS

NOTE:

03

ID0139700

150

PERSONNEL RESTRAINT

3P

2 6 7 8

5 1

4

8 3

01

ID0141295

151

PERSONNEL RESTRAINT

3P

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

105-473 106-633 105-340 106-356 106-191 107-720 141-040 141-152 141-041 141-153 141-043 141-352 141-321 141-322 105-994 106-851 106-949

QTY

DESCRIPTION

4 4 4 4 2 2 1 1 1 1 1 1 1 1 1 2 2 4

BOLT (3/4-NC X 5") BOLT (M20-2.50 X 130mm) FLG LOCKNUT (3/4-NC) FLG NUT (M20-2.50, 10.9) BOLT (5/8-NC X 6", GD 8) SCREW (M18-2.5 X 160mm, 10.9) 3' PERSONNEL RESTRAINT BAR 3' PERSONNEL RESTRAINT BAR 4' PERSONNEL RESTRAINT BAR 4' PERSONNEL RESTRAINT BAR 4' PERSONNEL RESTRAINT BAR 5' PERSONNEL RESTRAINT BAR 5' PERSONNEL RESTRAINT BAR LEFT RESTRAINT BRACKET (3P) RIGHT RESTRAINT BRACKET (2P) FLG LOCKNUT (5/8-NC) LOCKNUT (M18-2.5) WASHER (3/4", HARDENED)

REMARKS

H514 H514 SEE FOOTNOTE 1 H514, SEE FOOTNOTE 1 & 4 SEE FOOTNOTE 3, ROLLER BOOM SEE FOOTNOTE 2, ROLLER & STD BOOM SEE FOOTNOTE 3, ROLLER BOOM SEE FOOTNOTE 2, ROLLER BOOM SEE FOOTNOTE 2, STANDARD BOOM SEE FOOTNOTE 3, ROLLER BOOM SEE FOOTNOTE 2, STANDARD BOOM

H514 H514, SEE FOOTNOTE 4

NOT SHOWN:

FOOTNOTES:

1. TORQUE TO 250 FT. LBS. 2. H411 3. H412 & H514 4. EARLY PRODUCTION UNITS USED 107-688 WITH TWO HARDENED WASHERS. CURRENT PRODUCTION UNITS USE 107-720 WITH FOUR HARDENED WASHERS.

NOTE:

01

ID0141295

152

TRENCH CLEANER 2P

17

16

12 6

14 19

1

9

5

2

6 13 15

3

20 4 3 8 10

18

11

3

7

04

ID0139175

153

TRENCH CLEANER 2P

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

QTY

190-2406 190-2604 105-065 3 105-071 2 183-179 4 105-279 2 105-386 2 106-191 2 106-480 2 105-994 4 105-340 2 106-442 4 106-851 2 106-191 2 105-464 2 107-337 2 107-720 2 115-503 8 115-602 2 115-1018 2 141-109 2 141-215 1 141-134 1 141-135 1 141-136 1 141-137 1 140-1357 1 140-1358 1 141-211 1 141-132 1 140-1361 1 140-1365 1 140-1352 1 140-1363 1 140-1369 1 140-1354 1 140-1356 1 141-276 1 141-371 1 141-373 1 141-277 1 141-372 1 141-374 1 141-280 3 106-949 4 105-884 2 115-0005 2

DESCRIPTION

MECH CLEANER CONV KIT (ROLLER BOOM) MECH CLEANER CONV KIT (STD BOOM) LOCKNUT (1/2-NC) WASHER (1/2") PIN CARRIAGE BOLT (1/2-NC X 3") BOLT (5/8-NC X 4-1/2") BOLT (5/8-NC X 6", GD8) SCREW (M16-2.0 X 110mm, 10.9) FLG LOCKNUT (5/8-NC) FLG LOCKNUT (3/4-NC) FLG LOCKNUT (M16-2.00,PRV TRQ) LOCKNUT (M18-2.5) BOLT (5/8-NC X 6", GD8) BOLT (3/4-NC X 7", GD8) SCREW (M16-2.00 X 150mm, 10.9) SCREW (M18-2.5 X 160mm, 10.9) KLIP RING (3/4") EXTENSION SPRING EXTENSION SPRING REAR LINK CLEANER SHOE 4" CLEANER SHOE 6" CLEANER SHOE 8" CLEANER SHOE 10" CLEANER SHOE 12" SHOE BEAM (LTS) SHOE BEAM (STD) FRONT LINK FRONT LINK 3' LOWER CLEANER BAR (2.000" P) 3' LOWER CLEANER BAR (2.000" P) 3' LOWER CLEANER BAR (2.000" P) 4' LOWER CLEANER BAR (2.000" P) 4' LOWER CLEANER BAR (2.000" P) 4' LOWER CLEANER BAR (2.000" P) 5' LOWER CLEANER BAR (2.000" P) LEFT MOUNT BRACKET LEFT MOUNT BRACKET (12") LEFT MOUNT BRACKET (16") RIGHT MOUNT BRACKET RIGHT MOUNT BRACKET (12") RIGHT MOUNT BRACKET (16") SUPPORT SPACER WASHER (3/4", HARDENED) WASHER (.531") EXTERNAL SNAP RING (0.500")

REMARKS

INCL REF NO'S 1-4,8-10,12,13, 19 & 20; SEE F/N 1 INCL REF NO'S 1-4,8-10,12,13, 19 & 20; SEE F/N 1

M552 H313, H314, H514 M552 LOWER MOUNT BRACKET ONLY; TORQUE TO 650 FT-LBS H313, H314, H514 (2) H514 LOWER MOUNTING BOLTS M552 H313, H314 H514, SEE FOOTNOTE 4 OLD STYLE; SEE FOOTNOTE 6 SEE FOOTNOTES 5 & 6

ROLLER BOOMS; SEE FOOTNOTE 6 STANDARD BOOMS; SEE FOOTNOTE 6 ROLLER BOOMS STANDARD BOOMS ROLLER BOOMS; SEE FOOTNOTES 3 & 6 ROLLER BOOMS; SEE FOOTNOTES 2 & 6 STANDARD BOOM; SEE FOOTNOTES 2 & 6 ROLLER BOOMS; SEE FOOTNOTES 3 & 6 ROLLER BOOMS; SEE FOOTNOTES 2 & 6 STANDARD BOOM; SEE FOOTNOTES 2 & 6 STANDARD BOOM; SEE FOOTNOTES 2 & 6 3610 3610 3610 3610 M552 H514, SEE FOOTNOTE 4 SEE FOOTNOTE 6 SEE FOOTNOTE 6

FOOTNOTES:

1. REFER TO INSTALLATION DIAGRAM 050-926 2. H311 BEGINS WITH S/N 8K0126; H411 BEGINS WITH S/N 3M0693; H313 3. H312, H412, H314, H514, H450, H552, M552 4. EARLY PRODUCTION UNITS USED 107-688 W/ TWO HARDENED WASHERS. CURRENT PRODUCTION UNITS USE 107-720 W/ FOUR HARDENED WASHERS 5. INSTALL SPRING 115-1018 SO THAT OPEN ENDS OF THE COILS ARE FACING IN TOWARDS THE CLEANER BAR AND SHOE BEAM. 6. IF REPLACING OLD SPRINGS, CLEANER BAR OR SHOE BEAM, USE NEW CLEANER BAR AND SHOE BEAM SHOWN ON THIS PAGE, & INSTALL TRENCH CLEANER SPRING KIT 190-2669.

NOTE:

04

ID0139175

154

TRENCH CLEANER 3P

17

9

17

5

6

7 8 4 13 16 2 18

9

3 12

1 10

12

15

14 11

08

ID0109686

155

TRENCH CLEANER 3P REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

100-129 105-047 105-052 105-118 105-320 105-338 183-057 181-216 105-502 110-128 116-033 116-034 116-035 116-036 140-952 141-661 141-052 143-148 141-348 141-053 143-147 141-353 141-351 140-975 140-976 140-977 180-573 140-955 141-662 180-559

QTY

6 6 6 2 2 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CLEANER SHOE & SLIDE KIT LOCKNUT (3/8-NC) BOLT (3/8-NC X 1-1/4") WASHER (3/8") BOLT (3/4-NV X 2-1/4") LOCKNUT (3/4-NC) SLIDE LOCK PIN ROLLER COTTER PIN (3/16" X 2") SPRING CLIP PIN (5/32" X 1") SHOE FACING (6") SHOE FACING (8") SHOE FACING (10") SHOE FACING (12") CLEANER SHOE CLEANER SHOE CLEANER SHOE (44") 3P, 3' CLEANER BAR 3P, 3' CLAENER BAR CLEANER BAR 3P, 4' CLEANER BAR 3P, 4' CLEANER BAR 3P, 5' CLEANER BAR SHOE FACING 8" SHOE FACING 10" SHOE FACING 12" PIN CLEANER SHOE SLIDE CLEANER SHOE SLIDE PULL OIN (1" X 4.625")

INCLUDES REF NO.'S 1-9 & 16-18. SEE FOOTNOTE 1

OBSOLETE FOR 3' ROLLER BOOM, SEE FOOTNOTE 3.

FOR 3' ROLLER BOOM, SEE FOOTNOTE 2, OBSOLETE FOR 3' STD BOOM, SEE FOOTNOTE 2.

FOR 4' ROLLER BOOM, SEE FOOTNOTE 3 & 5.

FOR 4' ROLLER BOOM, SEE FOOTNOTE 2.

FOR 4' STD BOOM, SEE FOOTNOTE 2.

SEE FOOTNOTE 4

OBSOLETE

NOT SHOWN:

FOOTNOTES:

1. REFER TO INSTALLATION DIAGRAM 050-066 2. H411 3. H412, H514, M552 4. FOR 5' STD BOOM, SEE FOOTNOTE 2; FOR 5' ROLLER BOOM, SEE FOOTNOTE 3 5. H552 NOTE: THE ONLY 3P BOOM THAT CAN BE MOUNTED ON THE H552 IS THE 4' LTR NON-WEARBAR BOOM (143-358) NOTE:

08

ID0109686

156

35K DURATOOTH CHAINS 4P CHAIN ASSEMBLIES

2

1

3 4

5 8

6

7

CHAIN ASSEMBLIES

REPAIR PART# 130-1101 130-1102 130-1103 130-1104 135-1230 135-1231 106-400 105-099 137-214 105-047 136-029 105-258

04

135-1601 1 0 0 0 6 7 13 13 13 26 0 0

135-1602 0 1 0 0 8 8 16 16 16 32 0 0

135-1603 135-1604 135-1605 135-1606 135-1607 135-1608 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 1 0 1 1 0 0 0 9 11 8 10 6 8 7 8 8 11 9 11 12 7 8 9 17 21 12 17 21 7 8 9 24 25 32 17 21 19 32 34 44 34 42 26 0 6 8 8 10 0 16 20 0 12 16 0

ID0436038

157

35K DURATOOTH CHAINS 4P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-1601 135-1602 135-1603 135-1604 135-1605 135-1606 135-1607 135-1608

DESCRIPTION

REMARKS

35K 4P DURA 52P 4.4 35K 4P DURA 62P 4.4 35K 4P DURA 68P 4.4 35K 4P DURA 84P 4.4 35K 4P DURA 52P 6.4 35K 4P DURA 62P 6.4 35K 4P DURA 68P 6.4 35K 4P DURA 84P 6.4

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

130-1101 35K 4P DIG CHAIN 52P 130-1102 35K 4P DIG CHAIN 62P 130-1103 35K 4P DIG CHAIN 68P 130-1104 35K 4P DIG CHAIN 84P 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-099 BOLT (3/8-NC X 7/8") 137-214 LONG SPACER, 35K DIG CHAIN 105-047 LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-258 BOLT (3/8-NC X 3-3/4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085.

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

04

ID0436038

158

35K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

1 2 3 4 5 6

11 10 9 8 7

CHAIN ASSEMBLIES

REPAIR PART# 135-1600 137-218 135-1531 0 0 137-208 0 0 130-1105 1 0 137-210 0 0 137-209 0 1 135-1230 11 13 135-1231 11 13 106-400 22 26 105-099 22 26 137-214 22 26 105-047 44 52 136-029 0 0 105-258 0 0

02

137-217 0 0 0 0 1 13 13 14 14 38 52 12 24

137-215 0 0 0 1 0 15 16 31 31 31 62 0 0

137-216 0 0 0 1 0 15 16 15 15 47 62 16 32

137-219 1 0 0 0 0 17 17 34 34 34 68 0 0

137-221 1 0 0 0 0 17 17 18 18 50 68 16 32

135-1450 135-1451 0 0 1 1 0 0 1 1 0 0 19 19 20 20 39 19 39 19 39 59 78 78 0 20 0 40

137-220 1 1 0 0 0 21 21 42 42 42 84 0 0

137-222 1 1 0 0 0 21 21 22 22 62 84 20 40

ID0440801

159

35K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 137-219 2 137-216 3 137-215 4 137-217 5 137-218 6 135-1600 7 137-221 8 135-1450 9 135-1451 10 137-220 11 137-222

1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

35K 2P DURA 68P 4.6 35K 2P DURA 62P 6.6 35K 2P DURA 62P 4.6 35K 2P DURA 52P 6.6 35K 2P DURA 52P 4.6 35K 2P DURA 44P 4.4 35K 2P DURA 68P 6.6 35K 2P DURA 78P 4.6 35K 2P DURA 78P 6.6 35K 2P DURA 84P 4.6 35K 2P DURA 84P 6.6

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 130-1105 35K 2P DIG CHAIN 44P 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-099 BOLT (3/8-NC X 7/8") 137-214 LONG SPACER, 35K DIG CHAIN 105-047 LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-258 BOLT (3/8-NC X 3-3/4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085.

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0440801

160

35K ALLIGATOR/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

5

6

4 3 2 1

REPAIR PART# 137-229 135-1531 0 137-208 0 130-1105 0 137-210 0 137-209 1 135-1230 6 135-1231 6 136-163 2 136-165 2 136-164 10 106-400 12 105-098 40 137-214 40 137-212 12 105-814 52 136-029 0 105-022 0

03

CHAIN ASSEMBLIES 137-230 0 0 0 1 0 8 7 3 3 10 16 46 46 16 62 0 0

137-231 1 0 0 0 0 6 6 5 5 12 12 56 56 12 68 0 0

135-1456 135-1457 137-232 0 0 1 1 1 1 0 0 0 1 1 0 0 0 0 7 10 135 6 9 7 6 3 7 6 3 7 14 14 14 12 12 16 66 42 68 66 66 68 12 12 16 78 78 84 0 12 0 0 24 0

ID0440916

161

35K ALLIGATOR/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

137-229 137-230 137-231 135-1456 135-1457 137-232

DESCRIPTION

35K 2P CMB DUR/ALG B 52P 4.6 35K 2P CMB DUR/ALG B 62P 4.6 35K 2P CMB DUR/ALG B 68P 4.6 35K 2P CMB DUR/ALG B 78P 4.6 35K 2P DURA/ALG B/O COM 78P 6.6 35K 2P CMB DUR/ALG B 84P 4.6

REMARKS

USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 130-1105 35K 2P DIG CHAIN 44P 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 136-163 RIGHT BIT HOLDER 136-164 CENTER BIT HOLDER 136-165 LEFT BIT HOLDER 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-098 BOLT (3/8-NC X 3") 137-214 LONG SPACER, 35K DIG CHAIN 137-212 SHORT SPACER, 35K DIG CHAIN 105-814 FLG LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-022 BOLT (3/8-NC X 4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K&35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

03

ID0440916

162

35K SHARK/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

4

1

2

3

5

6

05

8

9 10

CHAIN ASSEMBLIES

REPAIR PART# 137-233 135-1531 0 137-208 0 130-1105 0 137-210 0 137-209 1 135-1230 6 135-1231 6 135-637 2 135-638 2 135-639 10 106-400 12 105-098 40 137-214 40 137-212 12 105-814 52 136-029 0 105-022 0 137-207 0 131-1011 0

7

135-1021 0 0 0 0 1 6 6 2 2 10 12 20 40 12 52 10 20 0 0

137-235 0 0 0 1 0 8 7 3 3 10 16 46 46 16 62 0 0 0 0

137-236 1 0 0 0 0 6 6 5 5 12 12 56 56 12 68 0 0 0 0

135-1445 135-1454 135-1455 137-237 1 0 0 1 0 1 1 1 0 0 0 0 0 1 1 0 0 0 0 0 6 7 10 7 6 6 9 7 4 6 3 6 4 6 3 6 14 14 14 16 12 16 12 16 28 62 42 68 56 62 66 68 12 16 12 16 68 78 78 84 14 0 12 0 28 0 24 0 0 0 0 0 0 0 0 0

135-1540 135-1541 0 0 0 0 0 0 0 0 0 0 6 7 6 6 5 4 5 4 11 12 14 12 52 30 52 54 14 12 66 66 0 12 0 24 0 0 1 1

ID0440984

163

35K SHARK/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10

1 1 1 1 1 1 1 1 1 1

137-233 135-1021 137-235 135-1540 135-1541 137-236 135-1445 135-1454 135-1455 137-237

DESCRIPTION

REMARKS

35K 2P CMB DUR/SHK B 52P 4.6 35K 2P CMB DURA/SHK B 52P 6.6 35K 2P CMB DUR/SHK B 62P 4.6 35K 2P CMB DUR/SHK B 66P 4.6 35K 2P SHK B/O COM 66P 6.0 35K 2P CMB DUR/SHK B 68P 4.6 35K 2P SHK B/O COM 68P 6.0 35K 2P CMB DUR/SHK B 78P 4.6 35K 2P CMB DUR/SHK B 78P 6.6 35K 2P CMB DUR/SHK B 84P 4.6

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 130-1105 35K 2P DIG CHAIN 44P 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 135-637 33/35K RIGHT BOLT-ON SHARK ADAPTER 135-638 33/35K LEFT BOLT-ON SHARK ADAPTER 135-639 33/35K CENTER CUT BOLT-ON SHARK ADAPTER 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-098 BOLT (3/8-NC X 3") 137-214 LONG SPACER, 35K DIG CHAIN 137-212 SHORT SPACER, 35K DIG CHAIN 105-814 FLG LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-022 BOLT (3/8-NC X 4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K &35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

05

ID0440984

164

35K SHARK & ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

5

4 3

2

1

6

03

8

CHAIN ASSEMBLIES

REPAIR PART# 135-1531 137-208 137-210 137-209 136-163 136-164 136-165 135-637 135-638 135-639 106-400 105-098 137-214 137-212 105-814 136-029 105-022

7

137-223 0 0 0 1 4 18 4 0 0 0 16 36 36 16 52 0 0

137-224 0 0 1 0 5 21 5 0 0 0 20 42 42 20 62 0 0

137-225 1 0 0 0 5 24 5 0 0 0 24 44 44 24 68 0 0

137-226 0 0 0 1 0 0 0 4 4 18 16 36 36 16 52 0 0

137-227 0 0 1 0 0 0 0 5 5 21 20 42 42 20 62 0 0

137-228 1 0 0 0 0 0 0 5 5 24 24 44 44 24 68 0 0

135-1452 135-1453 0 0 1 1 1 1 0 0 0 0 0 0 0 0 6 6 6 6 27 27 24 24 54 30 54 54 24 24 78 78 0 12 0 24

ID0444723

165

35K SHARK & ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

137-226 137-227 137-228 135-1452 135-1453 137-223 137-224 137-225

DESCRIPTION

35K 2P SHK B/O 52P 4.3 35K 2P SHK B/O 62P 4.3 35K 2P SHK B/O 68P 4.3 35K 2P SHK B/O 78P 4.3 35K 2P SHK B/O 78P 6.3 35K 2P ALG B/O 52P 4.3 35K 2P ALG B/O 62P 4.3 35K 2P ALG B/O 68P 4.3

REMARKS

SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 136-163 RIGHT BIT HOLDER 136-164 CENTER BIT HOLDER 136-165 LEFT BIT HOLDER 135-637 33/35K RIGHT BOLT-ON SHARK ADAPTER 135-638 33/35K LEFT BOLT-ON SHARK ADAPTER 135-639 33/35K CENTER CUT BOLT-ON SHARK ADAPTER 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-098 BOLT (3/8-NC X 3") 137-214 LONG SPACER, 35K DIG CHAIN 137-212 SHORT SPACER, 35K DIG CHAIN 105-814 FLG LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-022 BOLT (3/8-NC X 4")

FOOTNOTES:

1. USES 131-259 INSERT BITS

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

03

ID0444723

166

DIG CHAIN 2P50K2PS RR

5 10 9 7

12

8

11

2 4

13 3

14 1

6

16 15

05

ID0093102

167

DIG CHAIN 2P50K2PS RR REF PART NO. NUMBER

QTY

DESCRIPTION

1. 105-043 AR BOLT (1/2-NC X 1-1/4") 105-066 AR BOLT (1/2-NC X 1-3/4") 105-136 AR BOLT (1/2-NC X 3-1/2", GD8) 105-111 AR BOLT (1/2-NC X 4") 2. 105-065 AR LOCKNUT (1/2-NC) 3. 135-351 AR DIG CHAIN PIN (50K) 4. 135-358 AR LOCK KEY (3/32" X 1/2") 5. 135-952 AR CHAIN SPACER 6. 135-964 AR TOOTH SPACER (1/4") 7. 136-135 AR LEFT DIGGING TOOTH-CUP 135-1233 AR DURATOOTH, LEFT 1/4 50K 135-1234 AR DURATOOTH C2X, LEFT 1/4 50K 8. 136-136 AR RIGHT DIGGING TOOTH-CUP 135-1236 AR DURATOOTH, RIGHT 1/4 50K 135-1237 AR DURATOOTH C2X, RIGHT 1/4 50K 9. 136-137 AR L.H. 2.000 VEE 10. 136-138 AR R.H. 2.000 VEE 11. 138-203 AR ROLLER LINK (50K) 12. 138-215 AR 12' DIG CHAIN (2 P) 138-216 AR 4' DIG CHAIN (4 P) 138-217 AR 2' DIG CHAIN (2 P) 138-218 AR 11'4" CHAIN (68 P) 138-219 AR 2'8" DIG CHAIN (6 P) 13. 138-352 AR TOOTH SIDEBAR 138-370 AR MASTER LINK KIT-TOOTH(50K) 14. 138-353 AR TOOTH SIDEBAR-HEAD (50K) 138-370 AR MASTER LINK KIT-TOOTH (50K) 15. 136-031 AR CHAIN SPACER (.650") 16. 136-032 AR CHAIN SPACER (1.200")

REMARKS

OBSOLETE

OBSOLETE

OBSOLETE OBSOLETE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH KEY SIDE INCL REF NO'S 3,4,13, AND 14 HEAD SIDE INCL REF NO'S 3,4,13, AND 14

NOT SHOWN: 259-140 CHAIN JAWS (1-1/8" DRIVE)

NOT SHOWN:

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE (050-700). REFER TO BOOM, CHAIN AND CLEANER OPTIONS (052-190) FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

NOTE:

05

ID0093102

168

DIG CHAIN 2P50K4PS RR 4 PITCH SPACING-RAISED RIVET

10

9 6

18 11 2

7

5

16

1 8

17

15 13

14 12 4

3

03

ID0139093

169

DIG CHAIN 2P50K4PS RR 4 PITCH SPACING-RAISED RIVET REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

QTY

105-043 AR 105-066 AR 105-067 AR 105-082 AR 105-229 AR 105-065 AR 135-351 AR 135-358 AR 135-964 AR 135-952 AR 135-912 AR 135-950 AR 135-913 AR 135-914 AR 135-924 AR 135-1233 AR 135-1234 AR 135-925 AR 135-1236 AR 135-1237 AR 136-137 AR 136-138 AR 138-203 AR 138-210 AR 138-211 AR 138-212 AR 138-213 AR 138-214 AR 138-370 AR 138-380 AR 136-031 AR 136-032 AR 105-002 AR 105-076 AR 105-111 AR 105-275 AR

DESCRIPTION

BOLT (1/2-NC 1-1/4") BOLT (1/2-NC X 1-3/4") BOLT (1/2-NC X 2-3/4") BOLT (1/2-NC X 2-1/2") BOLT (1/2-NC X 2") LOCKNUT (1/2-NC) DIG CHAIN PIN (50K) LOCK KEY (3/32" X 1/2") TOOTH SPACER (1/4") CHAIN SPACER TOOTH ADAPTER (8") TOOTH ADAPTER (10") TOOTH ADAPTER (12") TOOTH ADAPTER (16") LEFT DIGGING TOOTH DURATOOTH, LEFT 1/4 50K DURATOOTH C2X, LEFT 1/4 50K RIGHT DIGGING TOOTH DURATOOTH, RIGHT 1/4 50K DURATOOTH C2X, RIGHT 1/4 50K LH 2.000 VEE TEETH RH 2.000 VEE TEETH ROLLER LINK (50K) DIG CHAIN - 4P (2' 0") DIG CHAIN - 4P (2' 8") DIG CHAIN - 4P (4' 0") DIG CHAIN - 4P (11' 4") DIG CHAIN - 4P (12' 0") MASTER LINK KIT-TOOTH (50K) MASTER LINK KIT-TOOTH (50K) CHAIN SPACER (.650") CHAIN SPACER (1.200") BOLT (1/2-NC 2-1/4") BOLT (1/2-NC X 3") BOLT (1/2-NC X 4") BOLT (1/2-NC X 6")

REMARKS

OBSOLETE

OBSOLETE

OBSOLETE OBSOLETE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH INCL REF NO'S 3, 4 AND 15

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0139093

170

DIGGING CHAIN (2"P - 50,000 LB)

ALTERNATE SIDEBAR SPACING-RAISED RIVET

7 6

2

11 8

5

1 5

9 10

13 4 12

3

07

ID0093099

171

DIGGING CHAIN (2"P - 50,000 LB)

ALTERNATE SIDEBAR SPACING-RAISED RIVET REF PART NO. NUMBER

1.

QTY

DESCRIPTION

105-043 AR BOLT (1/2-NC X 1-1/4") 105-066 AR BOLT (1/2-NC X 1-3/4") 105-065 AR LOCKNUT (1/2-NC) 135-351 AR DIG CHAIN PIN (50K) 135-358 AR LOCK KEY (3/32" X 1/2") 135-964 AR TOOTH SPACER (1/4") 135-924 AR LEFT CUP TOOTH 135-1233 AR DURATOOTH LEFT 1/4 50K 135-1234 AR DURATOOTH C2X LEFT 1/4 50K 135-925 AR RIGHT CUP TOOTH 135-1236 AR DURATOOTH RIGHT 1/4 50K 135-1237 AR DURATOOTH CSX RIGHT 1/4 50K 136-137 AR LEFT TOUGH TOOTH 90 136-138 AR RIGHT TOUGH TOOTH 90 138-203 AR ROLLER LINK (50K) 138-279 AR 2' CHAIN (12 P) 138-278 AR 2' 8" CHAIN (16 P) 138-280 AR 4' CHAIN (24 P) 138-281 AR 12' CHAIN (72 P) 138-352 AR TOOTH SIDEBAR 138-370 AR TOOTH SIDEBAR 138-355 AR PLAIN SIDEBAR 138-380 AR PLAIN SIDEBAR

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

REMARKS

USE WITH REF NO 5, TOOTH SPACER (135-964)

OBSOLETE OBSOLETE OBSOLETE OBSOLETE LESS TEETH LESS TEETH LESS TEETH LESS TEETH KEY SIDE HEAD SIDE

NOT SHOWN:

259-140

CHAIN JAWS (1-1/8" DRIVE)

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE (050-700). REFER TO BOOM, CHAIN AND CLEANER OPTIONS (050-190) FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

07

ID0093099

172

ALLIGATOR CHAIN 2.000" PITCH - 50,000 LB RAISED RIVET

20

17

12

16

14 13

11 13

18 15

14 19

14 13

3

14 4

1

13

5

2 8

10

6

9 7

04

ID0129160

173

ALLIGATOR CHAIN 2.000" PITCH - 50,000 LB

RAISED RIVET REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

QTY

105-065 AR 105-076 AR 105-110 AR 105-111 AR 138-203 AR 138-215 AR 138-216 AR 138-217 AR 138-218 AR 138-219 AR 135-351 AR 138-352 AR 138-370 AR 138-353 AR 138-370 AR 135-358 AR 135-952 AR 136-100 AR 136-101 AR 136-102 AR 136-036 AR 136-037 AR 136-038 AR 136-039 AR 136-040 AR 136-041 AR 136-043 AR 136-008 AR

DESCRIPTION

LOCKNUT (1/2-NC) BOLT (1/2-NC X 3") BOLT (1/2-NC X 4-1/2") BOLT (1/2-NC X 4") ROLLER LINK (50K) 12' DIG CHAIN (2P) 4' DIG CHAIN (2P) 2' DIG CHAIN (2P) 11' 4" DIG CHAIN (2P) 2' 8" DIG CHAIN (2P) DIG CHAIN PIN (50K) TOOTH SIDEBAR-KEY (50K) MASTER LINK-TOOTH (50K) TOOTH SIDEBAR-HEAD (50K) MASTER LINK-TOOTH (50K) LOCK KEY (3/32" X 1/2") CHAIN SPACER CAP BIT INSERT BIT INSERT BIT BIT ADAPTER BIT ADAPTER BIT ADAPTER BIT ADAPTER BIT ADAPTER BIT ADAPTER SPACER RETAINER RING

REMARKS

LESS ADAPTERS & BITS LESS ADAPTERS & BITS LESS ADAPTERS & BITS LESS ADAPTERS & BITS LESS ADAPTERS & BITS

INCL REF NO. 7-8 INCL REF NO. 7-8 USED WITH ONE OR TWO ADAPTERS ON OUTSIDE INCL REF NO. 20 INCL REF NO. 20 INCL REF NO. 20 FOR SINGLE LEFT OR RIGHT INSIDE OR OUTSIDE FOR SINGLE LEFT OR RIGHT INSIDE OR OUTSIDE FOR LEFT OUTSIDE FOR RIGHT OUTSIDE FOR RIGHT OUTSIDE FOR LEFT OUTSIDE USED WITH ADAPTER INSIDE

NOT SHOWN:

259-001 259-002 259-150 259-140 135-957

BIT PULLER - HAMMER BIT PULLER - SLIDE HAMMER BIT PUNCH - SLIDE HAMMER CHAIN JAWS (1-1/8" DRIVE) BIT BLOCK

FOR REF NO'S 13 - 18

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

04

ID0129160

174

DIGGING CHAIN 3.067" P - 70,000 LB 4 PITCH SPACING - RAISED RIVET

8

5

10 1 7 6 9

6

4 2

13

15

14

3 12 11

06

ID0129159

175

DIGGING CHAIN 3.067" P - 70,000 LB 4 PITCH SPACING - RAISED RIVET REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

QTY

105-372 AR 105-499 AR 105-466 AR 105-339 AR 105-321 AR 105-365 AR 105-383 AR 135-402 AR 135-910 AR 135-1239 AR 135-1240 AR 135-911 AR 135-1242 AR 135-1243 AR 135-921 AR 136-070 AR 135-960 AR 135-961 AR 135-962 AR 136-109 AR 136-110 AR 136-120 AR 137-501 AR 135-1182 AR 138-506 AR 138-507 AR 138-509 AR 138-510 AR 138-511 AR 138-512 AR 138-706 AR

DESCRIPTION

LOCKNUT (3/4-NC) BOLT (3/4-NC X 1-3/4") BOLT (3/4-NC X 2-1/2") BOLT (3/4-NC X 2-3/4") BOLT (3/4-NC X 3") BOLT (3/4-NC X 4") BOLT (3/4-NC X 6") LOCK KEY (5/16" X 3/4") LEFT CUP TOOTH DURATOOTH LEFT 3/8" 70-110K DURATOOTH C2X LEFT 3/8" 70-110K RIGHT CUP TOOTH DURATOOTH RIGHT 3/8" 70-110K DURATOOTH C2X RIGHT 3/8" 70-110K SPACER (3/8") SPACER (1/2") SHIM (1/8") CHAIN SPACER (.80") CHAIN SPACER (1.90") LEFT TOUGH TOOTH 90 RIGHT TOUGH TOOTH 90 TOOTH ADAPTER (7.65") DIG CHAIN PIN (70K) 70K STD REPAIR STATION KIT PLAIN SIDEBAR PLAIN SIDEBAR 2'-1" CHAIN (8 P) 4'-1" CHAIN (16 P) 15'-10" CHAIN (62 P) 13'-3" CHAIN (52 P) 14'-4" CHAIN (56 P)

REMARKS

OBSOLETE

OBSOLETE

OBSOLETE OBSOLETE

OBSOLETE, KEY SIDE OBSOLETE, HEAD SIDE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH

NOT SHOWN:

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM,CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

06

ID0129159

176

DIGGING CHAIN 3.067" P - 70,000 LB

8 10 7

6

9

4 5

15

12

1 13 3 14

11

2 6

04

ID0093092

177

DIGGING CHAIN 3.067" P - 70,000 LB REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

QTY

DESCRIPTION

105-372 AR LOCKNUT (3/4-NC) 105-499 AR BOLT (3/4-NC X 1-3/4") 105-466 AR BOLT (3/4-NC X 2-1/2") 105-339 AR BOLT (3/4-NC X 2-3/4") 105-321 AR BOLT (3/4-NC X 3") 105-365 AR BOLT (3/4-NC X 4") 106-086 AR BOLT (3/4-NC X 4-1/4") 105-383 AR BOLT (3/4-NC X 6") 135-402 AR LOCK KEY (5/16" X 3/4") 135-910 AR LEFT CUP TOOTH 135-1239 AR DURATOOTH, LEFT 3/8 70-110K 135-1240 AR DURATOOTH C2X, LEFT 3/8 70-110K 135-911 AR RIGHT CUP TOOTH 135-1242 AR DURATOOTH, RIGHT 3/8 70-110K 135-1243 AR DURATOOTH C2X, RIGHT 3/8 70-110K 135-921 AR TOOTH SPACER (3/8") 136-070 AR TOOTH SPACER (1/2") 135-960 AR SPACER (1/8") 135-961 AR CHAIN SPACER (.8") 135-962 AR CHAIN SPACER (1.9") 135-979 AR CHAIN SPACER (2.16") 136-109 AR LEFT TOUGH TOOTH 90 136-110 AR RIGHT TOUGH TOOTH 90 136-120 AR TOOTH ADAPTER 136-071 AR TOOTH ADAPTER 137-501 AR DIG CHAIN PIN (70K) 138-503 AR ROLLER LINK 138-504 AR TOOTH SIDEBAR 138-505 AR TOOTH SIDEBAR 138-701 AR 2'-2" CHAIN (8 P) 138-702 AR 4'-2" CHAIN (16 P) 138-703 AR 13'-3" CHAIN (52 P) 138-707 AR 14'-4" CHAIN (56 P) 138-704 AR 15'-10" CHAIN (62 P)

REMARKS

OBSOLETE OBSOLETE

OBSOLETE OBSOLETE FOR 10" & 12" WIDTHS. NOT SHOWN KEY SIDE HEAD SIDE LESS TEETH LESS TEETH LESS TEETH LESS TEETH LESS TEETH

NOT SHOWN:

259-140

CHAIN JAWS

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

04

ID0093092

178

179

180

PRM CHAIN ALGTR 3P70K2PS RR PR 2 PITCH SPACING-BOLT ON-RAISED RIVET 8 6 10

13 11

3

9

3

13 1

5

13

4

3 5

7 4 5

5 12

12 14

2 3 14

5

11

3 16

2

5

15

02

ID0093161

181

PRM CHAIN ALGTR 3P70K2PS RR PR 2 PITCH SPACING-BOLT ON-RAISED RIVET REF PART NO. NUMBER

QTY

DESCRIPTION

1. 105-322 AR BOLT (3/4-NC X 5-1/2") 2. 105-365 AR BOLT (3/4-NC X 4") 3. 105-372 AR LOCKNUT (3/4-NC) 4. 105-391 AR BOLT (3/4-NC X 4-1/2") 5. 135-1187 AR 70K PREMIUM REPAIR STATION KIT 6. 136-008 AR RETAINER RING 7. 139-701 AR 2'-1" CHAIN (8 P) 139-702 AR 4'-1" CHAIN (16 P) 139-707 AR 14'-6" CHAIN (56 P) 139-704 AR 16'-1" CHAIN (62 P) 8. 136-100 AR BIT (CARBIDE CAP) 136-101 AR BIT (CARBIDE INSERT) 136-102 AR HEAVY DUTY BIT (CARBIDE INSERT) 9. 135-973 AR BIT ADAPTER 10. 135-974 AR BIT ADAPTER 11. 135-975 AR BIT ADAPTER 12. 135-976 AR BIT ADAPTER 13. 135-979 AR CHAIN SPACER (2.156") 14. 135-980 AR CHAIN SPACER (1.405") 15. 137-501 AR DIG CHAIN PIN (70K) 16. 135-402 AR LOCK KEY (5/16" X 3/4")

REMARKS

USE WITH TWO (2) ADAPTERS ON OUTSIDE USE WITH ADAPTER ON INSIDE

LESS ADAPTERS LESS ADAPTERS LESS ADAPTERS LESS ADAPTERS INCL REF NO 17 INCL REF NO 17 INCL REF NO 17 LEFT OUTSIDE RIGHT OUTSIDE LEFT INSIDE AND RIGHT OUTSIDE RIGHT INSIDE AND LEFT OUTSIDE USED WITH ONE OR TWO ADAPTERS ON OUTSIDE USED WITH ONE ADAPTER INSIDE

NOT SHOWN:

259-001 259-002 259-150 259-140 135-957

BIT PULLER - HAMMER BIT PULLER - SLIDE HAMMER BIT PUNCH - SLIDE HAMMER CHAIN JAWS (1-1/8" DRIVE) BIT BLOCK

FOR REF NO.'S 9-12

FOOTNOTES:

NOTE:

FOR PARTS AND PATTERN FOR A SPECIFIC CHAIN REFER TO THE CHAIN GUIDE 050-700. REFER TO BOOM, CHAIN AND CLEANER OPTIONS 052-190 FOR RECOMMENDED COMBINATIONS OF CHAIN AND BOOM.

02

ID0093161

182

183

184

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS

HAMMER 3 5

4

SLIDE HAMMER 3 1

2

H

801-056

185

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS REF PART NO. NUMBER

1.

2.

3.

4.

5.

259-002 259-001 259-036 105-403 105-357 183-072 259-003

QTY

1 1 2 1 1

DESCRIPTION

REMARKS

BIT PULLER - SLIDE HAMMER BIT PULLER - HAMMER BIT PULLER JAM NUT (5/8-NC) LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER

INCL REF NO.'S 1 - 5 EARLY STYLE

FOOTNOTES

NOTE:

H

801-056

186

SPECIAL TOOLS - ALIG BIT PUNCH

5

3

4

1 9 2 8

6

H

7

801-057

187

SPECIAL TOOLS - ALIG BIT PUNCH REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

259-150 105-708 105-964 105-994 183-072 259-003 259-151 259-152 259-153 105-357

QTY

DESCRIPTION

REMARKS

INCL REF NO.'S 1 THRU 8

2 1 1 1 1 1 1 1 1

BIT PUNCH - SLIDE HAMMER SET SCREW (3/8-NC X 3/8", NLK) WASHER (.656") FLG LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER HEAVY BIT PUNCH-SLIDE HAMMER LIGHT BIT PUNCH-SLIDE HAMMER PUNCH ADAPTER-SLIDE HAMMER LOCKNUT (5/8-NC)

FOOTNOTES

NOTE:

H

801-057

188

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

189

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

190

191

192

NOTES:

ID0134963

193

REEL CARRIER

194

REEL CARRIER

9

12 8

9

21

2 24

8

1

25

23

14 20

7

11

8

8 6

9

26 8 18 8

3 10 4

21 5

22

9 8

10 17

19 17 13

01

15 16

ID0150254

195

REEL CARRIER REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

QTY

100-517 328-145 1 328-140 1 301-888 1 328-044 1 328-150 1 328-152 1 105-065 2 105-076 2 105-088 14 105-121 10 105-318 2 105-479 4 105-707 2 105-714 4 105-985 4 110-095 2 115-503 4 115-609 2 125-435 4 181-546 2 181-547 2 183-477 4 318-193 1 318-194 2 105-137 2 105-823 2 362-709 1

DESCRIPTION

REMARKS

REEL CARRIER KIT RIGHT MOUNT, REEL CARRIER LEFT MOUNT, REEL CARRIER LEFT MOUNT. REEL CARRIER REEL LIFT ARM RIGHT ARBOR RETAINER LEFT ARBOR RETAINER LOCKNUT (1/2-NC) BOLT (1/2-NC X 3") WASHER (1/2") BOLT (1/2-NC X 1") WASHER (7/8") BOLT (7/8-NC X 8-1/2") SET SCREW (1/4-NF x3/8") SET SCREW (3/8-NC X 1") FLANGE NUT (7/8-NC, GD 8) MACHINERY BUSHING EXTERNAL CLIP RING (3/4") COMPRESSION SPRING BUSHING BUSHING BUSHING PIN ARBOR SHAFT LOCK-UP ROD CLIP NUT (5/16-NC) FLG LOCK BOLT (5/16-NC XŲ") VALVE COVER

INC REF NO.'S 1 THRU 27 & SEE FOOTNOTE 1

NOT SHOWN:

275-606

DECAL KIT

FOOTNOTES:

1-FOR ADDITIONAL PARTS IN KIT, SEE PAGES ENTITLED "REEL CARRIER CABLE GUIDE MOUNT", "REEL CARRIER HYDRAULICS", "REEL HYDRAULICS - TRACTOR COMPONENTS" AND "ELECTRICAL DIAGRAM - REEL CARRIER ". REFER TO MOUNTING INSTRUCTIONS 060-027.

NOTE:

01

ID0150254

196

CABLE GUIDE ASSEMBLY

8

6 9 1 3 7

7

7 4

9 2 8

5

01

4 6

ID0141656

197

CABLE GUIDE ASSEMBLY REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

318-197 318-198 318-199 105-053 105-118 105-179 105-242 105-814 115-387 181-163

QTY

DESCRIPTION

REMARKS

CABLE GUIDE ASSEMBLY CABLE GUIDE BRACKET MOUNT BAR NUT (3/8-NC) WASHER (3/8") BOLT (3/8-NC X 3-1/2") BOLT (3/8-NC X 6-1/2") FLG LOCKNUT (3/8-NC) ROLLER SLEEVE

INCLUDES REF. NO.'S 1 THRU 9

1 2 2 2 4 3 7 3 3

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0141656

198

REEL CARRIER CABLE GUIDE MOUNT

1

6 3 5 2 4 7

01

ID0150246

199

REEL CARRIER CABLE GUIDE MOUNT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

100-517 110-622 328-159 328-158 105-826 105-834 105-814 318-197

QTY

2 1 1 4 4 4 1

DESCRIPTION

REEL CARRIER KIT U-BOLT (3/8-NC) RT. MOUNT, CABLE GUIDE LFT. MOUNT, CABLE GUIDE FLG LOCK BOLT (3/8-NC X 1") FLG LOCKNUT (3/8-NC) FLG LOCKNUT (3/8-NC) CABLE GUIDE ASSEMBLY

REMARKS

INC. REF NO'S. 1 THRU 6 & SEE FOOTNOTE 1

WITH TOP DEFLECTED THREADS

NOT SHOWN:

FOOTNOTES:

1-FOR ADDITIONAL PARTS IN KIT, SEE PAGES ENTITLED "REEL CARRIER", "REEL CARRIER HYDRAULICD' AND 'REEL CARRIER HYDRULICS - TRACTOR COMPONENTS".

NOTE:

01

ID0150246

200

REEL CARRIER HYDRAULICS

RLCR45

14 16 17 20 21 30 23

26

18

15

4 B 24 3

IN

B

22

34

LEFT

34

22 A

A 18

33

5 28

25

19

27

19

29

27

1 RIGHT

B

33

37 37

6

B

A

28

31 6

B

32

34 10

31

9 7 RETURN

PRESSURE

01

8

11

16

36

35

12 13 7

8

ID0150249

201

REEL CARRIER HYDRAULICS

RLCR45 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

100-517 110-031 105-106 105-832 105-095 115-006 115-002 105-826 110-333 154-726 154-727 110-270 305-256 105-075 158-575 105-822 105-047 105-003 154-385 154-379 154-221 154-228 154-346 154-373 500-704 500-703 154-261 154-276 154-424 150-122 154-316 154-255 154-263 154-252 154-887 154-682 154-651 154-670 154-857

QTY

1 2 2 2 2 2 2 2 1 1 2 1 1 1 2 1 2 2 2 1 1 1 1 1 1 1 2 2 1 1 2 1 2 4 1 1 1

DESCRIPTION

REMARKS

REEL CARRIER KIT CABLE TIE (1-1/2" TO 7") BOLT (1/4-NC X 2") FLG LOCKNUT (1/4-NC) WASHER (1/4") ZERK (04N45) ZERK (02N90) FLG LOCK BOLT (3/8-NC X 1") CLAMP (1") HOSE (04OFX-15"-3000) HOSE (04OFX-04OFX90-30"-3000) CLAMP HALF (HOLDS TWO) BACKUP BAR BOLT (3/8-NC X 2") HYD. CONTROL VALVE FLG LOCK BOLT (5/16-NC X ") LOCKNUT (3/8-NC) FLG LOCKNUT (3/8-NC) CONNECTOR (04O-06S, ORF) UNION BRANCH TEE (04O) CONNECTOR (06S-06O) UNION (06O-06OFX90) BRANCH TEE (06O-06O-06S) REDUCER (04O-06OF) RELIEF VALVE SEAL KIT CONNECTOR (040-08S) CONNECTOR (08S-04O90) BKHEAD RUN TEE ((040BK) CYL (2.0" X 1.18" X 12.18") RUN TEE (04S-04O-04O) UNION (04O-04OF90) CONNECTOR (04O-04S90) CONNECTOR (04S-04O90) HOSE (06OFX-06OFX45-23"-3000) HOSE (04OFX-17"-3000) HOSE (04OFX-70"-3000) HOSE (04OFX-19"-3000) HOSE (04OFX-04OFX90L-19"-3000)

INC. REF NO.'S 1 THRU 42 & SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1-FOR ADDITIONAL PARTS IN KIT, SEE PAGES ENTITLED "REEL CARRIER", "REEL CARRIER CABLE GUIDE MOUNT", "REEL CARRIER HYDRAULICS - TRACTOR COMPONENTS" AND 'ELECRIC DIAGRAM - REEL CARRIER'. & REFER TO MOUNTING INSTRUCTIONS 060-027.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

01

ID0150249

202

REEL CARRIER LIFT CYLINDER

6

FOOTNOTE 2

7

1

8

FOOTNOTE 5

3

2 5 4

02

ID0138322

203

REEL CARRIER LIFT CYLINDER REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

QTY

150-122 150-235 150-378 150-842 150-798 150-904 150-906 150-912 190-101 190-158 150-999

1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CYL (2.0" X 1.18" X 12.18") CYLINDER BARREL CYLINDER ROD CYLINDER HEAD CYLINDER HEAD SMOOTH BACKUP PISTON GROOVED PISTON LOCK RING SEAL REPAIR KIT SEAL REPAIR KIT PISTON

REEL CARRIER LIFT - INCL REF #'S

1-3 & 6-8

SEE FOOTNOTE 3 SEE FOOTNOTE 4 SEE FOOTNOTE 5 SEE FOOTNOTE 5 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 5 & 7

NOT SHOWN:

259-100 259-310

ROD U-SEAL INSTALLER PISTON SEAL INSTALLATION TOOL

FOOTNOTES:

1-THIS SEAL KIT IS NO LONGER AVAILABLE, US KIT LISTED BELOW. 2-USE ROD O-RING AND BACKUP COMBINATION FOR CYLINDER HEADS WITH .208" THK INTERNAL GROOVE. USE ROD U-SEAL FOR HEADS WITH .28" THK INTERNAL GROOVE. REFER TO INSTALLATION DIAGRAM 050-023 AND PISTON REPLACEMENT DIAGRAM 052-144.

3-THIS HEAD HAS .208" THK INTERNAL GROOVE DESIGNED FOR USE WITH O-RING AND BACKUP RING COMBINATIONS. THIS HEAD IS REPLACED BY HEAD WITH .28" THK INTERNAL GROOVE AND ROD U-SEAL. 4-THIS HAS .28" THK INTERNAL GROOVE DESIGNED FOR USE WITH ROD U-SEAL. 5-SINGLE PIECE 2" PISTON (REF #8) REPLACES TWO PIECES 2" PISTON (REF #'S 4 & 5).

6-PISTON BOLT TORQUE: 290-325 FT-LB. (395-440 N-M) 7-ADDED O-RING TO FACE OF PISTON. P/N 157-050 (216 D70) WILL BE INCLUDED IN DEAL REPAIR KIT. NOTE:

02

ID0138322

204

205

206

REEL CARRIER HYDRAULICS TRACTOR COMPONENTS

PRESSURE RETURN

11 9

10 13 7

6 12

5

3

01

2 4 1

8

ID0150252

207

REEL CARRIER HYDRAULICS TRACTOR COMPONENTS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

100-517 158-569 216-016 500-608 105-106 105-832 105-095 154-235 154-831 154-262 156-487 156-486 154-805 154-888 154-425 154-344 115-813

QTY

1

2 2 2 2 1 2 1 1 1 1 2 1 1

DESCRIPTION

REMARKS

REEL CARRIER KIT CONTROL VALVE SOLENOID VALVE SEAL KIT BOLT (1/4-NC X 2") FLG LOCKNUT (1/4-NC) WASHER (1/4") CONNECTOR (08S-08O90) HOSE (06OFX-21"-3000) REDUCER BUSHING (06O-08O) HYD LINE, DUMP VALVE OUT HYD LINE, DUMP VALVE OUT HOSE (06OFX-08OFX90-54"-3000) HOSE (06OFX45-06OFX90-46"-3000) BK CONNECTOR (06O-06O45BK) UNION RUN TEE (06OFX-06O-06O) ABRASION SLEEVE (1.39" X 36")

INC REF NO.'S 1 THRU 13 & SEE FOOTNOTE 1

SEE FOOTNOTE 2 SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1-FOR ADDITIONAL PARTS IN KIT, SEE PAGES ENTITLED "REEL CARRIER", "REEL CARRIER CABLE GUIDE MOUNT", "REEL CARRIER HYDRAULICS" AND "ELECTRICAL DIAGRAM - REEL CARRIER". REFER TO MOUNTING INSTRUCTIONS 060-027.

2-USE WITH 6-SPOOL CONTROL VALVE. 3-USE WITH DEALER ASSEMBLED 5-SPOOL VALVE.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF SAE AND ORS O-RINGS.

01

ID0150252

208

209

210

211

212

NOTES:

ID0134963

213

MISCELLANEOUS

214

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

215

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

216

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

217

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

218

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which are D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

219

220

221

ID0040564

222

ID0135281