Ditch Witch H300 Series Parts Manual 053-417 PDF

H300 Series Parts Manual

Issue 29, volume 1 of 2

053-417

1

H300 Series ISSUE NO. 29PL-05/22 For Replacement Copy Order P/N 053-417

Attachments for – 3500 & 3700 This product and its use may be coverd by one or more patents at http://patents.charlesmachine.works .

This manual contains information concerning the following models: H311, H312 Digging, H331 Plow, H341, H342 Earth Saw, & H350 Combo Attachments

Copyright 1992, 1993, 1994, 1995,1996, 1997, 2003, 2004, 2005, 2006, 2007, 2008, 2011, 2012, 2014, 2015, 2016, 2017, 2018, 2020, 2022 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Modularmatic, Jet Trac, Roto Witch, Subsite, Fluid Miser, Perma-Soil, Power Pipe, Super Witch, Super Witch II, Pierce Arrow, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

ID0173517

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY ______________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy July 2019

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse (including, but not limited to, rollover), abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 07

ID0134872

5

CONTENTS______________________ Volume 1 Decals Decal Location – H311 ......................................... 8 Decal Location – H331 ....................................... 12 Decal Location – H341 ....................................... 14 Decal Location – H342 ....................................... 18 Decal Location – H350 ....................................... 22

Frame Components Adapter Frame – H312 ...................................... 30 Adapter Frame – H331, H341 .............................. 32 Attachment Frame – H311, H411 ........................ 40 Attachment Frame – H312, H412 ........................ 42 Attachment Frame – H350 ................................ 44 Auger & Outboard Bearing – H311.................... 78 Auger & Outboard Bearing – H411.................... 80 Cable Guide Assembly...................................... 84 Earth Saw Segments – H342 ............................ 100 Earth Saw Wheel .............................................. 88 Head Shaft/Sprocket - H311 .............................. 74 Head Shaft/Sprocket - H311 Early ....................... 72 Head Shaft/Sprocket - H312 .............................. 76 Hydraulic Motor & Wheel Mounting ............... 98 Parking Stand & Wheel Guard – H342 .............. 92 Pivot ................................................................. 46 Pivot Bearings .................................................. 48 Reel Carrier ...................................................... 28 Saw Frame & Covers – H342 ............................. 90 Ship Kit – H342/RT45........................................... 34 Ship Kit – H342/RT55........................................... 38 Skid Shoes ........................................................ 64 Slide Frame – w/ Cylinder ................................... 96 Slide Frame – w/ Slides & Slide Pads ...................... 94 Slide Kit, Attachment Mount - H312 ................. 52 Slide Kit, Control Mount - H312......................... 54 Slide Kit, Frame Mount - H312........................... 50 Sprocket – 2.000” P/3.067” P ................................ 82 Swing Lock Delay Latch .................................... 70 Swing Post & Adapter Frame – H342 ................ 36 Tilt Adapter Kit - Adapter Mount ......................... 56 Tilt Adapter Kit - Control Mount .......................... 58 Trolley .............................................................. 60 Trolley – H350.................................................... 62 Vibrator – H331 ........................................... 66, 68 Wheel Frame Assembly ................................... 86

Hydraulics Attachment Hydraulics - H350 ........................ 110 Attachment Valve Hydraulics ........................ 112 Boom Lift Hydraulics – H350 ........................... 134 Counterbalance Valve.................................... 156 Cylinder .......................................................... 166 Cylinder – 2” x 1” x 4” ....................................... 168 Cylinder – 2” x 1.25” x 12.2” ............................... 178 Cylinder – 2” x 1.25” x 20” ................................. 170 Cylinder – 2.5” x 1.25” x 3”................................. 172 Cylinder – 3” x 1.5” x 10” ................................... 174 Cylinder – 3” x 1.75” x 12” ................................. 176 Digging Chain Drive Hydraulic – H311............. 150 Digging Chain Drive Hydraulic – H312............. 152 Earth Saw Cylinder ......................................... 184 Grease Cylinder...................................... 180, 182 Lift Cylinders .................................................. 116 Motor – 13 Spline ............................................. 162 Motor – 24 Spline ............................................. 164 Pivot Lift – H312 .............................................. 130 Pivot Lift Hydraulics - H311 ............................. 128 Plow Hydraulics – H350 ................................... 146 Plow Lift Hydraulics ....................................... 132 Plow Swing Hydraulics ................................... 114 Plumbing – H342/RT45 ..................................... 120 Pump – Tooth Spline ......................................... 158 Schematic – H311, H312, H412 ........................... 104 Schematic – H331, H341 ................................... 106 Schematic – H350 ............................................ 108 Slide Kit – H312 ............................................... 140 Swing Cylinder – H342..................................... 118 Tandem Hydrostat Pump – Tooth Spline .......... 160 Tilt Adapter Kit - Hydraulic w/ Slide .................... 144 Tilt Adapter Kit - Hydraulic w/o Slide .................. 142 Valve Hydraulics – H342/RT55 .......................... 124 Valve & Slide Cylinder Hyd. ........................... 126 Vibrator Drive Hydraulics............................... 148 Wheel Drive Hydraulics ................................. 154 Wheel Drive Hydraulics – H342 ....................... 122 Wheel Lift Hydraulics – H300 Series.................. 136 Wheel Lift Hydraulics – H342 .......................... 138

ID0173538

6

CONTENTS______________________ Volume 2 Accessories Auger .............................................................. 188 Boom .............................................................. 192 Boom 2P – H311, H312...................................... 194 Boom – Wear Bar 2P H311, H312 ......................... 198 Boom – Wear Bar 2P w/grease cylinder ................. 196 Combo Chains – 2P ......................................... 224 Chain Assembly – 50K, Alligator& Shark .............. 226 Chain Assembly – Welded Alg/Shark II ................ 228 Double Disk Blade .......................................... 242 Duratooth Chain – 50K, 2P ASB ......................... 222 Duratooth Chain – 50K, 2P Group 1 ................... 212 Duratooth Chain – 50K, 2P Group 2 ................... 214 Duratooth Chain – 50K, 2P Group 3 ................... 216 Duratooth Chain – 50K, 2P Group 4 ................... 218 Duratooth Chain – 50K, 2P Group 5 ................... 220 Feed Blades .................................................... 240 Large Tail Roller Boom – Low Headshaft ............ 202 Large Tail Sprocket/Tail Boom – H311 ............ 200 Personnel Restraint 2P ................................... 204 Pipe Puller ...................................................... 244 Pull Blades ...................................................... 238 Roller Boom 2P - High Headshaft ....................... 190 Special Tools – Alg. Bit Puller ............................. 232 Special Tools – Alg. Bit Punch............................. 234 Special Tools – Chain Jaw.................................. 236 Trench Cleaner ............................................... 208 Trench Cleaner 2P .......................................... 206 Weight Kit ...................................................... 210 Wheel Guard .................................................. 230

Miscellaneous Bolt/Nut Torque Chart ................................... 248 Optional Kits ................................................. 252 Parts Manual Change Request....................... 255 Related Publications ...................................... 254 Replacement O-Ring Chart ............................ 253 Warranty Registration ................................... 258

ID0173538

7

DECALS

ID0135069

8

DECAL LOCATION H311

09

ID0125116

9

DECAL LOCATION H311

REF PART NO. NUMBER

QTY

275-588 1 2 3 4 5 6 7 8

9

274-001 274-002 274-442 275-043 275-230 275-232 274-753 275-496 274-738 274-748 274-072 275-491 274-787

DESCRIPTION

REMARKS

DECAL KIT - H311 2 3 3 1 4 1 1 1 1 1 1 1 1

H311 MODEL ID DANGER CHAIN & AUGER LIFT POINT LOCATION CHAIN TENSION WARNING STRIPE (1-3/4” X 18”) DANGER (1-3/4” X 18”) DIGGING INSTRUCTIONS DIGGING INSTRUCTIONS DIGGING BOOM FUNCTION ATTACHMENT SLIDE CONTROL VALVE CONTROL VALVE NOTICE, LUBRICATION

(MODEL 3700) (MODEL 3500, SEE FOOTNOTE BELOW) (MODEL 3700) (MODEL 3700) (MODEL 3500) (MODEL 3500)

FOOTNOTES

1 . P/N 274-316 REQUIRED FOR MODEL 3500 EQUIPPED W/ FOOT SHUTTLE. (NOT PART OF KIT)

09

ID0125116

10

DECAL LOCATION H311

09

ID0125116

11

DECAL LOCATION H311

09

ID0125116

12

DECAL LOCATION H331

08

ID0094139

13

DECAL LOCATION H331 REF PART NO. NUMBER

QTY

275-597 1 2 3 4 5 6 7 8 9

274-069 270-6227 274-070 274-754 274-073 274-741 274-072 274-743 274-741 274-742 274-742 274-442 275-023 275-284

DESCRIPTION

REMARKS

DECAL KIT - H331 2 2 1 1 1 1 1 1 1 1 1 3 1 1

H331 - MODEL ID H331 - MODEL ID SELECTOR - TILT BLADE PLOWING INSTRUCTIONS PLOWING INSTRUCTIONS PLOW SWING CONTROL VALVE DECAL PLOW SWING / BFB TILT PLOW SWING PLOW LIFT PLOW LIFT LIFT POINTS OIL LEVEL AMPLITUDE CHART

(OLD STYLE) (NEW STYLE) (MODEL 3700) (MODEL 3500) (MODEL 3700) (MODEL 3500) (MODEL 3700)

FOOTNOTES

1 . P/N 274-326 REQUIRED FOR MODEL 3500 EQUIPPED W/ FOOT SHUTTLE. (NOT PART OF KIT)

08

ID0094139

14

DECAL LOCATION H341

15

9 5 2 3 4

7 12

1

7 14

8 10 9 16 13

6

11

08

ID0125114

15

DECAL LOCATION H341

15

10 7

12

08

9

16

ID0125114

16

DECAL LOCATION H341 REF PART NO. NUMBER

QTY

275-598 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

274-070 274-744 274-746 274-072 274-744 274-745 274-745 274-755 274-074 274-075 274-442 275-103 275-184 275-193 275-230 275-233 275-310 275-326 275-443 270-4952

DESCRIPTION

REMARKS

DECAL KIT - H341 1 1 1 1 1 1 1 1 1 2 3 2 3 2 2 2 2 1 1 2

SELECTOR - TILT BLADE SAW SWING SAW SWING / BFB TILT CONTROL VALVE DECAL SAW SWING SAW LIFT SAW LIFT SAWING INSTRUCTIONS SAWING INSTRUCTIONS H341 MODEL - ID LIFT - POINT LOCATION DANGER TURNING SAW WARNING MOVING PARTS CAUTION FLYING OBJECTS WARNING STRIPE (1-3/4” X 18”) DANGER (2-3/4” X 18”) DITCH WITCH ® EMBLEM WARNING CRUSHING WEIGHT DANGER TURNING SAW CAUTION SILICA DUST

(MODEL 3700) (MODEL 3700) (MODEL 3500)

(MODEL 3700) (MODEL 3500, SEE FOOTNOTE BELOW)

FOOTNOTES

1 . P/N 274-327 REQUIRED FOR MODEL 3500 EQUIPPED W/ FOOT SHUTTLE. (NOT PART OF KIT)

08

ID0125114

17

18

DECAL LOCATION H342

04

ID0198023

19

DECAL LOCATION H342 REF PART NO. NUMBER

QTY

270-2127 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

274-070 274-746 274-744 274-745 274-755 270-2126 270-6237 274-442 275-103 275-184 275-193 275-230 275-233 270-5440 275-326 275-443

DESCRIPTION

REMARKS

DECAL KIT - H342 1 1 1 1 1 2 2 3 2 3 2 2 2 2 1 1

SELECTOR - TILT BLADE SAW SWING / BFB TILT SAW SWING SAW LIFT SAWING INSTRUCTIONS H342 MODEL ID H342 MODEL ID LIFT - POINT LOCATION DANGER ROTATING WHEEL WARNING MOVING PARTS CAUTION FLYING OBJECTS DANGER STRIPE (1-3/4” X 18”) DANGER (2-3/4” X 18”) LOGO WARNING CRUSHING WEIGHT DANGER ROTATING WHEEL

(OLD STYLE) (NEW STYLE)

FOOTNOTES

04

ID0198023

20

DECAL LOCATION H342

04

ID0198023

21

22

DECAL LOCATION H350

8

6

3

10

2

1

5 7

4

11

9 1.0”

1

.25”

11

ID0107088

23

DECAL LOCATION H350 REF PART NO. NUMBER

QTY

275-640 1 2 3 4 5 6 7 8 9 10 11

700-002 274-288 270-6238 274-442 275-023 270-7947 275-107 273-059 273-058 275-284 274-747 275-491 274-753 275-496

DESCRIPTION

REMARKS

DECAL KIT - H350 3 2 2 1 1 1 1 4 1 1 1 1 1 1

DANGER CHAIN & AUGER ISO H350 MODEL ID H350 MODEL ID LIFT - POINT LOCATION OIL LEVEL CHAIN TENSION ISO SELECTOR - PLOW & DIG DANGER STRIPE (1.50” X 18”) DANGER (1.50” X 18”) AMPLITUDE CHART PLOW/CHAIN LIFT FUNCTION CONTROL VALVE TRENCHING INSTRUCTIONS TRENCHING INSTRUCTIONS

(OLD STYLE) (NEW STYLE)

(MODEL 3700) (MODEL 3500) (MODEL 3700) (MODEL 3500)

FOOTNOTES

1 . P/N 274-316 REQUIRED W/ MODEL 3500 EQUIPPED W/ FOOT SHUTTLE. ( NOT PART OF KIT ).

11

ID0107088

24

DECAL LOCATION H350

7

6.5” 2.25”

7

1

.5” .5”

.25”

.25”

13.00”

.75”

8 .25”

.25”

8

2.25” 12.00”

7

7

H350 VALVE SECTION OPTIONS

11

ID0107088

25

26

NOTES:

ID0134963

27

FRAME COMPONENTS

ID0135068

28

29

30

31

32

ADAPTER FRAME H331, H341, AND H342

4

7

5

2

1

1

8 5

5

3 6

04

5

ID0124151

33

ADAPTER FRAME H331, H341, AND H342 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

QTY

105-873 2 105-841 4 105-970 8 105-994 8 125-727 4 313-130 1 300-4743 1 362-632 1 105-866 2

DESCRIPTION

FLG LK BOLT (5/16-NC X 1") CLIP NUT (5/16-NC) FLG LK BOLT (5/8-NC X 1-3/4") FLG LOCKNUT (5/8-NC) BUSHING ADAPTER FRAME ADAPTER FRAME ADAPTER FRAME COVER FLG LK BOLT (5/16-NC X 1-1/4")

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. NOT USED ON H342 2. USED ON H342 ONLY

NOTE:

04

ID0124151

34

SHIP KIT H342/RT45

3 1

4

2 8

5

6

7 4

5

03

ID0353358

35

SHIP KIT H342/RT45 REF PART NO. NUMBER

1 2 3 4 5 6 7 8

602-797 362-632 105-841 105-873 105-970 105-994 259-002 317-357 317-358

QTY

DESCRIPTION

- SHIP KIT 1 COVER, PLOW 4 CLIP NUT (5/16-NC) 4 FLG LK BOLT (5/16-NC X 1") 8 FLG BOLT (5/8-NC X 1-3/4,GD8) 6 FLG LOCKNUT (5/8-NC) 1 BIT PULLER - SLIDE HAMMER 1 LEFT STABLIZER 1 RIGHT STABILIZER

REMARKS

INCLUDES REF NO.'S 1 THRU 11

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0353358

36

SWING POST & ADAPTER FRAME H342

5 4

1 3

2

7

6

10

9 8

3 11

4

5

6 7

01

ID0352750

37

SWING POST & ADAPTER FRAME H342

REF PART NO. NUMBER

QTY

1 300-4743 2 300-4750 3 125-754 4 300-5998 5 105-825 6 105-021 7 105-709 8 183-833 9 105-416 10 105-400 11 125-738

1 FRAME, SAW ADAPTER (H342) 1 SWING POST(H342) 2 COMPOSITION BUSHING (2") 2 PIN - BOLT-ON (2.000 X 4.25) 2 FLG LK BOLT (3/8-NC X 3/4) 2 NUT(1/2-NC) 2 SET SCREW (1/2-NC X 2", SQ) 1 TAPERED PIN (38.1MM X 350MM) 1 WASHER (5/8") 1 BOLT (5/8-NC X 1-1/4") 2 COMPOSITION BUSHING (1.506")

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0352750

38

SHIP KIT H342/RT55

5

4

4 5

4

5

4 1

4 2

3 5 4 1

2 3

01

ID0353339

39

SHIP KIT H342/RT55 REF PART NO. NUMBER

1 2 3 4 5

195-2320 184-840 106-398 107-598 106-355 107-336

QTY

DESCRIPTION

- SHIP KIT 2 SPACER 2 WASHER (M16, HARDENED) 2 SCREW (M16 X 60MM 10.9) 18 FLG NUT (M16-2.00, 10.9) 16 FLG SCREW (M16-2.00X45MM,10.9)

REMARKS

INCLUDES REF NO.'S 1 THRU 5

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0353339

40

41

42

43

44

ATTACHMENT FRAME H350

3

7

6 2

21 7 16 5

10

22 23 11 13 22

14

11 9

12

22

8

20 17

15

18

22

19

22

4 11

1

04

ID0105690

45

ATTACHMENT FRAME H350 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

313-119 362-667 362-613 116-371 362-671 106-039 105-826 105-834 105-833 105-829 106-719 105-969 181-975 183-590 105-994 105-970 313-149 313-150 105-464 105-384 313-148 105-677 313-189

QTY

1 1 1 1 1 4 7 3 5 5 7 1 1 1 8 8 1 1 2 2 1 7 1

DESCRIPTION

REMARKS

ATTACHMENT FRAME END GUARD BOOM CYLINDER COVER SPOILS FLAP TRENCHER FITTINGS COVER NUTSERT (3/8-NC) FLG LOCK BOLT (3/8-NC X 1") FLG LOCKNUT (3/8-NC) FLG LOCKNUT (1/2-NC) FLG LOCK BOLT (1/2-NC X 1") CLIP NUT (3/8-NC) FLG BOLT (5/8-NC X 1-1/2", GD 8) TAPERED INSERT (1.75" OD) TAPERED PIN (1.75" OD X 8" ) FLG LOCKNUT (5/8-NC) FLG BOLT (5/8-NC X 1-3/4") PLOW FRAME COVER COVER BOLT (3/4-NC X 7") WASHER (3/4") SPACER PLATE FLG BOLT (3/8-NC X 1-1/4") COVER

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0105690

46

PIVOT

H311, H312, H350, H411, H412, H450

1

7

5

8

3

1 1

13 11 10

6

4

2

13

7 3 9 12 19

1 14

15 16 18 06

17 ID0127471

47

PIVOT

H311, H312, H350, H411, H412, H450 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

105-994 105-969 105-970 106-191 106-028 115-001 140-540 143-116 143-184 145-845 145-810 145-852 145-980 181-975 183-589 313-079 322-952 115-291 156-228 116-468 105-283 115-003 125-644

QTY

6 1 4 2 2 2 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1

DESCRIPTION

FLG LOCKNUT (5/8-NC) FLG BOLT (5/8-NC X 1-1/2", GD 8) FLG BOLT (5/8-NC X 1-3/4", GD 8) BOLT (5/8-NC X 6", GD 8) FLG BOLT (5/8-NC X 5", GD8) ZERK (02N) BOOM STUB 2P BOOM STUB 3P BOOM STUB 2P, (3P-H411, H412) PIVOT PIVOT CLAMP PLATE PIVOT SLEEVE TAPERED INSERT TAPERED PIN PIVOT CAP PIVOT CAP SHIM NIPPLE (1/8-NPT X 2.5") ELBOW (02N90) LUBRICATION HOSE (02N, 24") LOCKNUT (02NF) ZERK (1/4-NF) GROOVED PIVOT SLEEVE

REMARKS

SEE FOOTNOTE 5 SEE FOOTNOTE 4 SEE FOOTNOTE 4,7 SEE FOOTNOTE 3, ROLLER BOOMS ONLY SEE FOOTNOTE 4, ALL STANDARD BOOMS ONLY SEE FOOTNOTE 4,5 SEE FOOTNOTE 3 SEE FOOTNOTE 8

SEE FOOTNOTE 8 SEE FOOTNOTE 1 & 6 SEE FOOTNOTE 1 & 6 SEE FOOTNOTE 1, 2 & 6 SEE FOOTNOTE 1, 2 & 6 SEE FOOTNOTE 1, 2 & 6

NOT SHOWN:

1. S/N 8J0082-8K0229 (H312), S/N 8J0094(H412), S/N 8JO522(H450), S/N 8J0070-8K0125 (H311).

2. BEGIN WITH S/N 8J0070 (H311), S/N 8J0082 (H312), S/N 8J0522 (H450), S/N 8K0252 (H411), FOOTNOTES: S/N 8J0094 (H412).

3. ENDS WITH S/N 8K0125 (H311) 4. BEGINS WITH S/N 8K0126 (H311), S/N 8K0252 (H411) 5. H312, H412, H450 6. LUBRICATION ARRANGEMENT (REF.#'S 14 THRU 18) WAS NOT ON EARLY LIP SEAL OR MECHANICAL SEAL UNITS. UPGRADE FROM MECHANICAL SEAL TO GREASE CAVITY ARRANGEMENT BY ORDERING CONVERSION KIT: 190-190 FOR H311, 190-191 FOR H312 & 2P H412, 190-192 FOR H450, AND 190-193 FOR 3P H412.

REFER TO REPLACEMENT DIAGRAM 052-209, HEADSHAFT AND SPROCKET PAGE, AND PIVOT BEARING PAGE. NOTE: 7. USED FOR ROLLER BOOMS, 4' & 5' 2P OR 3P STANDARD BOOMS. 8. GREASE CAVITY STYLE MUST HAVE SLOTS AVAILABLE IN THEM.

06

ID0127471

48

PIVOT BEARINGS

H311, H312, H411, H412, H450

1

FOOTNOTE 1

3

5

2 6 7 4

01

ID0141302

49

PIVOT BEARINGS

H311, H312, H411, H412, H450 REF PART NO. NUMBER

QTY

DESCRIPTION

1. 115-492 1 INTERNAL SNAP RING 2. 125-258 1 BEARING RACE 3. 125-259 1 BEARING 4. 126-006 1 TAPERED BEARING 5. 157-555 1 INTERNAL SEAL 157-564 1 INTERNAL SEAL 157-583 1 INTERNAL SEAL 6. 157-582 2 INTERNAL SEAL 7. 125-288 1 BEARING RACE

REMARKS

SEE FOOTNOTE 1

SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

190-762

PIVOT BEARING/SEAL REPAIR KIT

FOOTNOTES:

1. EARLY STYLE ENDS WITH S/N 8G0694 (H311) ONLY *2. FOR MECHANICAL SEAL MODELS S/N 8G0695 THRU 8J0069 (H311), 8G0695 THRU 8J0081 (H312), 8H0319 THRU 8J0042 (H412). NO H450 UNITS OR H411 UNITS, REFER TO SERVICE BULLETIN 052-203.

3. PRESENT PRODUCTION BEGINS WITH S/N 8J0070 (H311), 8J0082 (H312), 8J0094 (H412), 8J0522 (H450), H411.

NOTE:

* UPGRADE FROM MECHANICAL SEAL TO GREASE CAVITY ARRANGEMENT BY ORDERING CONVERSION KIT: 190-190 FOR H311, 190-191 FOR H312 AND 2P H412, 190-192 FOR H450. REFER TO REPLACEMENT DIAGRAM 052-209, PIVOT PAGE, HEADSHAFT AND SPROCKET PAGE.

01

ID0141302

50

51

52

53

54

55

56

57

58

59

60

TROLLY

6

21 4

4

5 15

11 10 14

4

10

1

9

5

5

5

4 20 11 11

13 11

12

5

19

4 4 5

4 5

7

4 5

11

13 11

10

11

12 4

7

5 4

13

5 11

12

13

17

13

11

12

5

11

16 3

4

16 2

11

8

4

5

5 4

3 2

2

8 3

2

3 11

18 23 24 22

11 23 25

03

ID0124109

61

TROLLY REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

QTY

105-003 4 106-030 4 106-559 4 105-293 14 105-475 14 105-823 4 110-228 2 115-063 2 125-435 2 125-727 6 125-728 24 125-734 4 183-289 6 183-290 1 183-291 2 183-292 2 317-083 1 317-084 1 317-087 1 317-476 1 317-162 1 105-047 2 105-118 4 105-156 2 185-911 1

DESCRIPTION

FLG LOCKNUT (5/16-NC) LOCK WASHER (M12) SCREW (M12-1.75 X 25MM, 8.8) BOLT (1/2-NC X 3/4") WASHER (1/2") FLG LK BOLT (5/16-NC X 3/4") QUICK CLIP PIN ISOLATOR, 80X57CF M12-1275 C70 COMPOSITION BUSHING COMPOSITION BUSHING COMPOSITION BUSHING BUSHING PIN PIN PIN PIN (5.94") UPPER LIFT ARM LOWER LIFT ARM LIFT LINK TROLLEY SWING TROLLEY COVER LOCKNUT (3/8-NC) WASHER (3/8") BOLT (3/8-NC X 1-1/2") SOD CUTTER BLADE

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. DURNING ASSEMBLY MAKE SURE THAT THE UPPER LIFT AREM ASSEMBLY IS ASSEMBLED WITH THE NOTCHES DOWN.

NOTE:

03

ID0124109

62

63

64

65

66

VIBRATOR

10

12 15

34

33

13

27

24

23 25

17 26 12

5

16

15 13 22

6

2

13

15

18

11

3

1

11

21

28

8 7

14 15 7

8

31

20

22 13

4

32

9 29 30

06

ID0046095

67

VIBRATOR REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

QTY

105-065 4 115-488 2 105-549 4 105-823 18 105-826 12 105-854 12 105-935 2 105-936 2 110-111 1 155-748 10. 110-266 1 11. 110-303 8 12. 115-518 2 13. 126-123 4 14. 155-138 1 155-748 15. 155-898 4 16. 165-929 1 17. 165-980 2 18. 183-747 1 19. 167-185 1 20. 317-548 4 21. 185-073 1 22. 168-002 2 23. 317-453 2 24. 316-252 2 25. 317-503 1 26. 155-701 1 27. 106-202 2 28. 184-289 1 29. 155-125 1 30. 183-292 2 31. 125-734 4 32. 110-228 2 33. 185-135 1 34. 105-823 4

DESCRIPTION

LOCKNUT (1/2-NC) INTERNAL SNAP RING BOLT (1/2-NC X 3-3/4") FLG LOCK BOLT (5/16-NC X 3/4") FLG LOCK BOLT (3/8-NC X 1") CLIP NUT (3/8-NC) THRUST LOCKNUT (1.967") TANG LOCK WASHER (1.992") SIGHT GAUGE O-RING (916 D90) EXPANSION PLUG (4-1/2") MACHINERY BUSHING EXTERNAL SNAP RING BEARING (CYL. ROLLER) PLUG (16S) O-RING (916 D90) INTERNAL SEAL KEY (3/8" SQ X 2-1/2") KEY (3/8" SQ X .98") FRONT SHAFT REAR SHAFT VIBRATOR BALANCE WEIGHT COVER GEAR END PLATE KEY (3/8" SQ X 1.495") VIBRATOR BOX O-RING (345 D70) FLG BOLT (1/2-NC X 1-1/4" GD 8) RING PLUG (04S) PIN BUSHING CLIP PIN (7/16" X 1-11/16") BEARING COVER FLG LK BOLT (5/16-NC X 3/4")

REMARKS

EARLY STYLE

NOT SHOWN:

259-041

SEAL AND BEARING DRIVER

FOR VIBRATOR BOX SEAL AND BEARINGS

FOOTNOTES:

NOTE:

06

ID0046095

68

VIBRATOR

10 28

18 16 17

27 12 11 13 15 29

24 17

19

15 13 11

5

23

6

8 7

1 26 25

3

22

20 2

30 2

21 4

09

9

14

ID0124149

69

VIBRATOR REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

QTY

317-163 105-065 4 501-325 4 105-549 4 105-823 14 105-826 12 107-011 12 105-935 2 105-936 2 110-111 1 155-748 110-266 1 110-267 4 110-303 4 115-518 2 125-344 4 155-138 1 155-898 4 165-929 1 165-980 2 167-057 1 167-058 1 185-050 4 185-073 1 185-097 1 185-098 1 316-252 2 317-075 1 317-082 2 185-135 1 105-823 4 184-927 1 155-125 1

DESCRIPTION

REMARKS

VIBRATOR SHAKER LOCKNUT (1/2-NC) FLG LOCK BOLT (5/16-NC X 5/8") BOLT (1/2-NC X 3-3/4") FLG LK BOLT (5/16-NC X 3/4") FLG LK BOLT (3/8-NC X 1") CLIP NUT (3/8-NC) THRUST LOCKNUT (1.967-NF) TANG LOCK WASHER (1.992") SIGHT GAUGE O-RING (916 D90) EXPANSION PLUG MACHINERY BUSHING (.06" THK) MACHINERY BUSHING (.09" THK) EXTERNAL SNAP RING ROLLER BEARING PLUG (16S) INTERNAL SEAL KEY (3/8" SQ X 2.450") KEY (3/8" SQ X .980") RIGHT VIBRATOR SHAFT LEFT VIBRATOR SHAFT VIBRATOR BALANCE WEIGHT COVER LEFT GEAR RIGHT GEAR KEY (3/8" SQ X 1.495") VIBRATOR BOX SIDE COVER BEARING COVER FLG LK BOLT (5/16-NC X 3/4") BUSHING (SHAKER MOTOR) PLUG (04S)

INCL REF NO.'S 1 THRU 26

EARLY STYLE SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1 13 INTERNAL SPLINES;

SEE FOOTNOTE 1

BEGINS WITH S/N 8T0140

NOT SHOWN:

259-041

SEAL AND BEARING DRIVER

FOR VIBRATOR BOX SEAL AND BEARINGS

FOOTNOTES:

1-REFER TO ITEM #3 OF TECHNICAL BITS DATED 12-2-82 FOR METHOD TO DETERMINE PROPER MACHINERY BUSHING.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

09

ID0124149

70

SWING LOCK DELAY LATCH

10

8

2

8

9

4

2

7

3

6 1 5 7

9

9

D

802-374

71

SWING LOCK DELAY LATCH REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

105-150 317-413 306-964 105-805 181-940 105-285 115-568 105-003 105-047 317-436 306-963 118-338 105-826

QTY

1 1 1 3 1 1 1 2 2 1 1 1 1

DESCRIPTION

BOLT (3/8-NC X 1-3/4") LATCH PLATE (12") 10 DEG LATCH PLATE (12") SPRING WASHER (3/8") SPACER BOLT (5/16-NC X 1-3/4") SPRING FLG LOCKNUT (5/16-NC) LOCKNUT (3/8-NC) LATCH PLATE (18") 10 DEG LATCH PLATE (18") LATCH PLATE BOLT (3/8-NC X 1")

REMARKS

ENDS WITH S/N 8T0145. OLD STYLE ENDS WITH S/N . OLD STYLE

ENDS WITH S/N 8T0145. OLD STYLE ENDS WITH S/N . OLD STYLE BEGINS WITH S/N . SEE FOOTNOTE 2

FOOTNOTES

1. REFER TO INSTALLATION DIAGRAM 599-062.

2. WHEN ORDERING 306-963 OR 306-964, YOU WILL GET 118-338. THIS PART IS A DIRECT REPLACEMENT FOR THOSE PARTS. 118-338 WILL FIT A 18" AND 12".

NOTE:

D

802-374

72

73

74

75

76

77

78

79

80

81

82

SPROCKET 2P & 3P

1 (2P)

2

3 4

5 (3P)

6

7

8 08

ID0084614

83

SPROCKET 2P & 3P REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

140-654 140-707 125-209 180-062 181-051 125-209 180-448 180-534 115-165 115-003 115-009 105-313 105-377 140-656 140-723 140-661 140-661 115-470 125-265 125-266 155-843 180-026 180-243 180-244 180-440 180-441 115-009 115-001 115-003 115-152

QTY

2 1 1 2 2 1 1 1 1 1 1 2 2 2 1 1 2 1 2 2 2 2 2 1 1 1 1 1 1 1

DESCRIPTION

IDLER SPROCKET (2.000"A9) SPROCKET (2.000"A9) TAPERED BEARING/ RACE (1.250") DIRT SHIELD DIRT SHIELD TAPERED BEARING/RACE (1.250") IDLER SHAFT (1.250" X 3.500") IDLER SHAFT (1.250" X 4.375") PLUG (O8N, SOC) ZERK (1/4-NF, STR) ZERK (1/4-NF, STR XL) JAM NUT (1-1/4-NF) JAM NUT (1-1/2-NF) SPROCKET (3.067" A10) SPROCKET (3.067"A10) TAPERED BRNG/RACE (1.500") TAPERED BRNG/RACE (1.500") INTERNAL SNAP RING (3.250") TAPERED BEARING (1.500") TAPERED RACE (3.265") INTERNAL SEAL (2.474") SPACER (2.515") SEAL SPACER (1.501") BEARING SPACER (1.535") SLIDE & STOP SHAFT (4.875") IDLER SHAFT (1.500" X 4.375") ZERK (1/4-NF, STR XL) ZERK (02N) ZERK (1/4-NF, STR) PLUG (12N, SQ FM)

REMARKS

FOR 2" P FOR 2" P INCL. REF. NO. 4 SEE FOOTNOTE 1 SEE FOOTNOTE 2 FOR 2" P FOR 2" P SLIDE AND STOP FOR 2" P IDLER SPROCKET FOR 2" P EARLY STYLE FOR 2" P FOR 3" P FOR 3" P REF. NO. 5 FOR 3" P FOR 3" P

FOR 3" P SLIDE AND STOP FOR 3" P IDLER SPROCKET EARLY STYLE NON-SELF TAPPING SELF-TAPPING

NOT SHOWN:

FOOTNOTES:

1. THIS 9/32" DIRT SHIELD IS INCLUDED WITH SPROCKET AND IS USED WHEN SPROCKET IS BEING USED IN SLIDE STOP. 2. THIS 25/32" DIRT SHIELD IS NOT INCLUDED WITH SPROCKET PARTS ASSEMBLY. REPLACE SHIELD THAT COMES WITH SPROCKET PARTS ASSEMBLY WITH THIS SHIELD IF SPROCKET IS USED IN BOOM.

NOTE:

08

ID0084614

84

CABLE GUIDE ASSEMBLY

8

6 9 1 3 7

7

7 4

9 2 8

5

01

4 6

ID0141656

85

CABLE GUIDE ASSEMBLY REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

318-197 318-198 318-199 105-053 105-118 105-179 105-242 105-814 115-387 181-163

QTY

DESCRIPTION

REMARKS

CABLE GUIDE ASSEMBLY CABLE GUIDE BRACKET MOUNT BAR NUT (3/8-NC) WASHER (3/8") BOLT (3/8-NC X 3-1/2") BOLT (3/8-NC X 6-1/2") FLG LOCKNUT (3/8-NC) ROLLER SLEEVE

INCLUDES REF. NO.'S 1 THRU 9

1 2 2 2 4 3 7 3 3

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0141656

86

WHEEL FRAME ASS'Y

29

28

22

30

32 33 4 20

5 2 1 3

10

6 5

16 18

14

31

4 13

26

8

21

9

17

12 25

23

15

27 11

24

19 7

05

ID0124131

87

WHEEL FRAME ASS'Y REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

QTY

105-293 4 105-416 1 105-475 4 105-514 3 105-993 5 105-994 4 110-1018 2 105-021 2 105-709 2 115-483 2 115-499 4 116-239 1 110-055 2 125-435 2 125-738 2 183-291 2 183-424 1 105-873 19 183-426 2 183-427 2 183-428 1 317-322 1 313-122 1 317-357 1 317-358 1 317-274 2 105-003 19 317-303 1 317-304 1 105-836 2 362-132 1 106-015 2 165-699 1 125-771 4 184-141 4

DESCRIPTION

BOLT (1/2-NC X 3/4") WASHER (5/8") WASHER (1/2") COTTER PIN (1/4" X 3") BOLT (5/8-NC X 4") FLG LOCKNUT (5/8-NC) GRIP (1.000", BLACK) NUT (1/2-NC) SET SCREW (1/2-NC X 2") KLIP RING (1.250") KLIP RING (1.000") DEFLECTOR FLAP MACHINERY BUSHING (1-1/4") COMPOSITION BUSHING (1.375") COMPOSITION BUSHING (1.506") PIN (1.375" X 3.187") TAPERED PIN (1.500" X 11.000") FLG LK BOLT (5/16-NC X 1") PIN (1.000" X 4.500") PIN (1.250" X 4.600") PIN (1.250" X 13.434") FRAME SWING POST LEFT STABILIZER RIGHT STABILIZER INNER TUBE FLG LOCKNUT (5/16-NC) LEFT PARKING STAND RIGHT PARKING STAND FLG LK BOLT (1/4-NC X ") COVER PLATE NUTSERT (1/4-NC) FELT WASHER (2.25") COMPOSITION BUSHING (1.25") BUSHING

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. USED ON LATE H341. IF REPLACING 150-122 HYD. CYLINDER WITH 150-1394 HYD CYLINDER, USE KIT 190-1171 TO COMPLETE INSTALLATION.

NOTE:

05

ID0124131

88

EARTH SAW WHEEL

SEE FOOTNOTE 1 1 5

13

3 12

11

13

16

10 14

8

6

4 2

15

16 9

03

7 REPAIR TOOLS

ID0124108

89

EARTH SAW WHEEL REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

QTY

105-082 3 106-012 6 105-425 1 105-970 36 105-994 6 259-002 259-001 235-085 235-123 235-124 235-125 235-126 235-127 136-100 36 136-101 36 136-102 36 181-787 1 259-038 1 317-259 2 317-260 6 100-659 317-261 3 317-262 3 100-660 317-263 3 317-264 3 100-661 135-957 317-270 12 317-319 2

DESCRIPTION

REMARKS

BOLT (1/2-NC X 2-1/2") FLG BOLT (5/8-NC X 3") BOLT (1-NC X 2-1/2") FLG BOLT (5/8-NC X 1-3/4") FLG LOCKNUT (5/8-NC) BIT PULLER BIT PULLER TOOTH BLOCK CLAMP BLOCK MOUNTING FIXTURE (2.5") BLOCK MOUNTING FIXTURE (3.5") BLOCK MOUNTING FIXTURE (3.5") BLOCK MOUNTING FIXTURE (5") BLOCK MOUNTING FIXTURE (5") CARBIDE CAP BIT CARBIDE INSERT BIT HEAVY DUTY CARBIDE INSERT BIT WHEEL HUB HUB PULLER WHEEL SIDE PLATE 2.5" SAW SEGMENT 2.5" SAW SEGMENT KIT 3.5' SAW SEGMENT 3.5" SAW SEGMENT 3.5" SAW SEGMENT KIT 5" SAW SEGMENT 5" SAW SEGMENT 5" SAW SEGMENT KIT REPLACEMENT BIT BLOCK WEAR BAR WHEEL BOLT PLATE

SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 2 SEE FOOTNOTE 3

SEE FOOTNOTE 1

SEE FOOTNOTE 4 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 4 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 4 FITS ALL THREE SEGMENTS

NOT SHOWN:

FOOTNOTES:

1. THESE ARE TOOLS USED TO REMOVE WHEEL HUB. 2. WHILE FACING FRONT OF SEGMENT THE FIRST BLOCK POINTS RIGHT. 3. WHILE FACING FRONT OF SEGMENT THE FIRST BLOCK POINTS LEFT. 4. REFER TO INSTALLATION DIAGRAM 050-032.

NOTE:

03

ID0124108

90

SAW FRAME & COVERS H342

6

15 2

14 10

1

11

7

4

8 12 5 3 13 10 9

03

ID0352749

91

SAW FRAME & COVERS H342

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

QTY

DESCRIPTION

300-4754 1 SAW FRAME(H342) 300-2714 1 TOP COVER 116-239 1 DEFLECTOR FLAP 362-132 1 COVER PLATE 301-3892 1 COVER 105-830 14 FLG LK BOLT (1/2-NC X 1-1/4") 105-833 12 FLG LOCKNUT (1/2-NC) 105-823 3 FLG LK BOLT (5/16-NC X 3/4") 105-003 5 FLG LOCKNUT (5/16-NC) 106-015 4 NUTSERT (1/4-NC) 105-836 2 FLG LK BOLT (1/4-NC X 1/2") 105-825 6 FLG LK BOLT (3/8-NC X 3/4) 105-834 6 FLG LOCKNUT (3/8-NC) 302-2517 1 WEAR PAD 105-819 2 FLG LK BOLT (1/4-NC X 1")

REMARKS

SEE FOOTNOTE 1

SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. THE 302-2517 WEAR PAD, 105-819 X2 FLG LK BOLT (1/4-NC X 1"), AND 106-015 X2 NUTSERT (1/4-NC) BEGINS WITH S/N: CMWH342XLF0000085.

NOTE:

03

ID0352749

92

PARKING STAND & WHEEL GUARD H342

3

2

7

5

8

4 5

1 6

10

9

15

13

14 10

9

13 16 18 17

16

12 18

11

17 01

ID0352758

93

PARKING STAND & WHEEL GUARD H342

REF PART NO. NUMBER

QTY

1 323-699 2 317-370 3 105-048 4 105-065 5 301-3732 6 105-089 7 105-891 8 115-349 9 183-461 10 115-503 11 317-304 12 317-303 13 317-274 14 183-425 15 110-032 16 183-426 17 110-1018 18 115-499

1 WHEEL GUARD ASSEMBLY 1 HANDLE 1 BOLT (1/2-NC X 1-1/2") 1 LOCKNUT (1/2-NC) 2 KNOB (5/16") 1 LOCKNUT (5/16-NC) 1 BOLT (5/16-NC X 1-1/2", SLT) 1 GROMMET (1/2") 2 PIN 4 KLIP RING (.750") 1 RIGHT PARKING STAND 1 LEFT PARKING STAND 2 INNER TUBE 2 HANDLE PIN 2 SNAPPER PIN (5/16" X 2-1/2") 2 PIN (1.000" X 4.500") 2 GRIP (1.00", BLACK) 4 KLIP RING (1.000")

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0352758

94

SLIDE FRAME

WITH SLIDES & SLIDE PADS H342/RT55

8

1 9

6 10 7

13 12 2

8

8 11 7 8

6

3 4 8 7 6 11

9

10

12 5

03

ID0353001

95

SLIDE FRAME

WITH SLIDES & SLIDE PADS H342/RT55 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13

1 SLIDE FRAME 1 SLIDE MOUNT 1 UPPER SLIDE 1 SLIDE BRACKET 1 LOWER FRAME MOUNT 12 SLIDE BAR (PLASTIC) 12 SCREW (M12-1.75X40MM, CSK) 16 FLG LK NUT (M12-1.75) 6 SCREW (M16-2.00 X 65MM,10.9,ZP)FULL THD 6 JAM NUT (M16-2.00) 12 FLG LKNUT (M16-2.0,PRVTRQ10.9) 12 FLG SCREW (M16-2.00X45MM,10.9) 4 FLG LK SCREW (M12-1.75 X 35MM)

301-6933 323-592 322-755 327-922 329-868 322-754 106-548 106-709 105-1999 106-775 106-442 107-336 107-003

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0353001

96

SLIDE FRAME WITH CYLINDER H342/RT55

1

6 5 4

4

2 3 5 6

01

ID0352939

97

SLIDE FRAME WITH CYLINDER H342/RT55 REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 SLIDE FRAME 1 CYL (2.5 X 1.50 X 24.0) 2 COMPOSITION BUSHING (1.5") 2 CYLINDER PIN (1.5) 4 MACH BUSHING (18GA, 1-1/2") 4 KLIP RING (1.50")

322-651 151-090 125-538 179-821 125-545 115-511

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS

01

ID0352939

98

HYDRAULIC MOTOR & WHEEL MOUNTING H342

7

9

8 3 1

6

5

2

3

01

4

ID0352768

99

HYDRAULIC MOTOR & WHEEL MOUNTING H342

REF PART NO. NUMBER

QTY

DESCRIPTION

1 155-593 1 HYDRAULIC MOTOR 2 105-993 4 FLG BOLT (5/8-NC X 4") 3 105-994 10 FLG LOCKNUT (5/8-NC) 4 300-4755 2 WHEEL(H342) 5 300-4756 1 HUB, SOLID WHEEL(H342) 6 317-319 1 WHEEL BOLT PLATE 7 165-699 1 WASHER (2.250", FELT) 8 105-501 1 COTTER PIN (.125" X 2.0") 9 106-012 6 FLANGE BOLT (5/8-NC X 3")

REMARKS

INCLUDES NUT

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0352768

100

EARTH SAW SEGMENTS H342

5

6

8

1 7

2 3 4

01

ID0353517

101

EARTH SAW SEGMENTS H342

REF PART NO. NUMBER

QTY

DESCRIPTION

1 136-101 1 INSERT BIT 2 136-100 1 CAP BIT 3 136-102 1 INSERT BIT 4 300-7018 6 2.5" SAW SEGMENT 5 300-7017 3 3.5" SAW SEGMENT 6 300-7014 3 5.0" SAW SEGMENT 7 105-994 36 FLG LOCKNUT (5/8-NC) 8 105-337 36 FLANGE BOLT (5/8-NC X 2")

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 4 SEE FOOTNOTE 5 SEE FOOTNOTE 5

NOT SHOWN:

259-002 259-001 235-085 235-123 235-124 235-125 235-126 235-127

BIT PULLER BIT PULLER TOOTH BLOCK C.LAMP BLOCK MOUNTING FIXTURE (2.5") BLOCK MOUNTING FIXTURE (3.5") BLOCK MOUNTING FIXTURE (3.5") BLOCK MOUNTING FIXTURE (5") BLOCK MOUNTING FIXTURE (5")

WHILE FACING FRONT OF SEGMENT THE FIRST BLOCK POINTS RIGHT. WHILE FACING FRONT OF SEGMENT THE FIRST BLOCK POINTS LEFT. WHILE FACING FRONT OF SEGMENT THE FIRST BLOCK POINTS RIGHT. WHILE FACING FRONT OF SEGMENT THE FIRST BLOCK POINTS LEFT.

FOOTNOTES:

1. EACH BIT IS USED AS REQUIRED. 2. KIT #190-1310 (2.5" SEGMENTS) INCLUDES 6 SEGMENTS-300-7018. 36 BOLTS 105-337. 36 LOCKNUTS 105-994 & BITS AS REQUIRED. 3. KIT #190-1311 (3.5" SEGMENTS) INCLUDES 3 SEGMENTS 300-7017 & 3 SEGMENTS 300-7016. 36 BOLTS 105-337. 36 LOCKNUTS 105-994.

AND BITS AS REQUIRED. 4. KIT #190-1312 (5" SEGMENTS) INCLUDES 3 SEGMENTS 300-7015 & 3 SEGMENTS 300-7014. 36 BOLTS 105-337. 36 LOCKNUTS 105-994.

AND BITS AS REQUIRED. 5. EACH SEGMENT SET REQUIRES 36 FLANGE BOLTS (105-337) & EACH SEGMENT SET REQUIRES 36 FLG LOCKNUTS (105-994).

NOTE:

01

ID0353517

102

NOTES:

ID0134963

103

HYDRAULICS

ID0135071

104

105

106

107

108

109

110

ATTACHMENT HYDRAULICS H350

TO HYD SELECTOR VALVE

21 5

23

34

23

22

8

2

24 24 1 "A" 6

"B" 9 "C" "D" 3

33

27

28

4 10 7 30 29

32

31

3700

31

ATTACHMENT RETURN REVERSE

26 12

12

16

25 ATTACHMENT PRESSURE FORWARD

20 18

19 TO TOP OF PUMP (FLUSH)

13

11

17 15

11

14 TO TANK CASE (CASE DRAIN)

05

ID0105689

111

ATTACHMENT HYDRAULICS H350

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

QTY

154-295 1 154-676 1 154-988 1 154-940 1 154-989 1 154-284 1 154-261 1 154-371 1 154-355 1 154-419 1 154-726 4 154-987 4 154-730 1 154-930 1 154-220 2 154-226 2 155-623 1 105-821 2 105-095 2 105-832 2 117-615 1 154-252 1 154-695 1 154-491 1 154-439 1 514-009 1 154-409 1 154-378 1 515-608 1 515-537 1 154-290 3 115-789 1 150-4390 1 154-263 1

DESCRIPTION

BK RUN TEE (08O,BK) HOSE (08OFX-46"-3000) HOSE (16OFX90-48"-3000) HOSE (04OFX90-50"-5000) HOSE (16OFX45-36"-5000) CONNECTOR (08S-08O45) REDUCER BUSHING (04O-08S) CONNECTOR (16O-12S45) CONNECTOR (04O90,BK) CONNECTOR (16O90,BK) HOSE (04OFX90-15"-3000) HOSE (16OFX90-13.75"-3000) HOSE (04OFX45-66"-3000) HOSE (08OFX45-36"-3000) CONNECTOR (04O-06S) CONNECTOR (04O-06S90) HYD LOCK VALVE FLG LK BOLT (1/4-NC X 1-3/4") WASHER (1/4") FLG LOCKNUT (1/4-NC) ABRASION SLEEVE (3.66" X 30") CONNECTOR (04O-04S90) HOSE (04OFX-38"-3000) CONNECTOR (12S-16O45, 04SF) CONNECTOR (16O-16O) CONNECTOR (16O-16O90) UNION RUN TEE (16OFX-16O-16O) CONNECTOR (12O-16S) HOSE (16OFX90-44"-5000) HOSE 16OFX90-58"-3000) CONNECTOR (16OF-16S90) ABRASION SLEEVE (3.66" X 54") HYDRAULIC MOTOR (3.66" X 54") CONNECTOR (04S-04O45)

REMARKS

3500

3500

3700 3700 3700 3700

SEE FOOTNOTE 2, 3, 4, AND 5

NOT SHOWN:

105-1087 2 SET SCREW (M12-1.75 X 12MM) 106-117 10 (M12-1.75 X 80MM)

FOOTNOTES:

1. REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS. 2. REPLACES 158-704 HYDRALIC MOTOR, 158-704 REQUIRES 12X 106-117 BOLT (M12-1.75 X 80MM).

3. PLUG UNUSED THREADED HOLES WITH 2X 105-1087 SET SCREW (M12-1.75 X 12MM) (N/A WITH 158-704 HYDRAULIC MOTOR).

4. INSTALL BOLTS WITH SILICONE, TORQUE TO 95 FT/LBS. 5. FOR 150-4390 USE SEAL KIT 500-3455, FOR 158-704 USE SEAL REPAIR KIT 500-547.

NOTE:

05

ID0105689

112

113

114

115

116

LIFT CYLINDERS H342

14 10 11

17

16

8

14

12 6

9

18

13 1

12

4

5

12

3

15

2

2 15 12

8

1 7

01

3

ID0352830

117

LIFT CYLINDERS H342

REF PART NO. NUMBER

QTY

1 150-1394 2 154-252 3 154-401 4 154-682 5 154-682 6 154-668 7 154-668 8 115-777 9 154-376 10 154-255 11 154-296 12 125-771 13 183-427 14 105-514 15 184-141 16 183-428 17 115-483 18 110-055

2 CYL (2.0 X 1.25 X 12.2) 2 CONNECTOR (04S-04O90) 2 CONNECTOR (04S-04O90, ORF) 1 HOSE (04OFX-17"-3000) 1 HOSE (04OFX-17"-3000) 1 HOSE (04OFX-32"-3000) 1 HOSE (04OFX-32"-3000) 2 ABRASION SLEEVE (1.59" X 15"") 2 TEE (04O) 2 UNION (04O-04OFX90) 2 CAP (04OF) 4 COMPOSITION BUSHING (1.25") 2 PIN (1.250" X 4.650") 3 COTTER PIN (.250 X 3.000) 2 BUSHING 1 PIN (1.250" X 13.434"") 2 KLIP RING (1.250") 2 MACH BUSHING (1-1/4", 14GA)

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS

01

ID0352830

118

SWING CYLINDER H342

5 4

3

2 1

6

02

ID0352876

119

SWING CYLINDER H342

REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

151-055 125-772 183-575 181-974 105-400 125-771

DESCRIPTION

REMARKS

CYL (2.5 X 1.25 X 3.0) COMPOSITION BUSHING (1.5") TAPERED PIN (1.500" X 5.200") TAPERED INSERT (1.5") BOLT (5/8-NC X 1-1/4") COMPOSITION BUSHING (1.25")

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS

02

ID0352876

120

H342/RT45 PLUMBING

6 5 1

3

9

8

10

7

20 2

4 14 18 19

21

22

13

15 22 FOOTNOTE 1

12 17 16

02

ID0353383

121

H342/RT45 PLUMBING REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 19 20 21 22

1 COUNTERBALANCE VALVE 2 BOLT (5/16-NC X 3-3/4") 2 FLG LOCKNUT (5/16-NC) 2 COUNTERBALANCE CARTRIDGE KIT 2 CONNECTOR (04O-08S, ORF) 1 HOSE (04OFX-17"-3000) 1 HOSE (04OFX-17"-3000) 2 CONNECTOR (04O-06S90) 2 CONNECTOR (04O-08S) 2 UNION (04O-04OFX90) 2 PLUG (04O) 1 ABRASION SLEEVE (1.75" X 38"") 1 CONNECTOR (08O-10S) 1 HOSE (08OFX-24"-3000) 1 TEE (08O) 2 CAP (08OF) 2 HOSE (04OFX45-48"-3000) 2 HOSE (04OFX-30"-3000) 2 CONNECTOR (06S-04O, ORF) 1 CONNECTOR (08O-08O90) 2 UNION (16O-16OFX90)

158-514 105-251 105-003 500-478 154-375 154-682 154-682 154-226 154-261 154-255 154-297 117-654 154-279 154-674 154-258 154-327 515-135 154-702 514-074 514-266 154-290

DESCRIPTION

REMARKS

NOT USED WITH SLIDE FRAME ASSEMBLY - SEE FOOTNOTE 1 NOT USED WITH SLIDE FRAME ASSEMBLY - SEE FOOTNOTE 1 SEE FOOTNTOE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1. ATTACHES TO TEES ON PARTS PAGE ID0.52830 (REF #9).

2. ATTACHES TO VALVE IN RT45 RIGHT FENDER 3. CONNECTS TO TRACTOR BULKHEADS & DRIVE HOSE'S, PARTS PAGE ID0352814.

NOTE:

REFER TO 0-RING CHART 800-301 IN BACK OF THE BOOK FOR REPLACEMENT OF 0-RINGS.

02

ID0353383

122

WHEEL DRIVE HYDRAULICS H342

4

8

5

8 FOOTNOTE 1

9 7 2

6

2 1

01

3

ID0352814

123

WHEEL DRIVE HYDRAULICS H342

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9

1 HYDRAULIC MOTOR 2 CONNECTOR (16S-16O90) 1 CONNECTOR (06S-08090) 1 HOSE (16OFX-78"-4000) 1 HOSE (16OFX-78"-4000) 1 HOSE (08OFX-82"-3000) 1 ABRASION SLEEVE (3.66" X 83") 2 PLUG (16O) 1 PLUG (08O)

155-593 154-287 154-253 154-785 154-785 515-684 115-812 154-334 154-331

DESCRIPTION

REMARKS

REFER TO FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. ABRASION SLEEVE 115-812 (REF # 7) MUST HAVE A SLIT CUT INTO IT TO ALLOW HOSE 515-684 (REF #6) TO SLIDE INTO IT ALONG SIDE OF HOSE 154-785 (2X) WHICH RUNS FULL LENGTH OF THE SLEEVE, FOR A TOTAL OF THREE HOSE'S INSIDE THE SLEEVE (115-812).

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS

01

ID0352814

124

VALVE HYDRAULICS H342/RT55

27 5

17

18

26

25 5

19

24

23

20 2 3

7

8

4

5

TO SWING CYLINDER

21 9 10

22

11 16

6 14

1

15

12

TO LIFT CYLINDERS

5 4 7 13

02

ID0353328

125

VALVE HYDRAULICS H342/RT55 REF PART NO. NUMBER

QTY

1 345-6947 2 515-314 3 154-884 4 154-396 5 154-327 6 514-242 7 154-329 8 154-702 9 159-821 10 154-297 11 154-695 12 515-682 13 154-419 14 154-290 15 154-250 16 150-1320 17 117-292 18 117-179 19 117-392 20 117-396 21 117-323 22 117-323 23 117-324 24 154-276 25 154-279 26 154-261 27 154-322

1 HOSE (16OFX90L-66"-6000) 1 HOSE (16OFX90-62"-6000) 1 HOSE (08OFX90-60"-3000) 2 BK CONNECTOR (08O-08O90BK) 5 CAP (08OF) 2 BK CONNECTOR (16O-16O45BK) 4 CAP (16OF) 1 HOSE (04OFX-30"-3000) 1 HOSE (04OFX90M-36"-3000) 2 PLUG (04O) 1 HOSE (04OFX-38"-3000) 1 HOSE (04OFX90M-48"-3000) 2 BK CONNECTOR (16O-16O90BK) 2 UNION (16O-16OFX90) 1 CONNECTOR (04O-06S45) 1 CONNECTOR (06S-040, .035 ORF) 1 ABRASION SLEEVE (2.07" X 70") 1 ABRASION SLEEVE (2.07" X 62") 1 ABRASION SLEEVE (1.25" X 60") 1 ABRASION SLEEVE (1.25" X 28") 1 ABRASION SLEEVE (1.25" X 37") 1 ABRASION SLEEVE (1.25" X 37") 1 ABRASION SLEEVE (1.25" X 48") 2 CONNECTOR (04O-08S90) 2 CONNECTOR (08O-10S) 2 CONNECTOR (04O-08S) 1 CONNECTOR (08O-10S90)

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. CAPS (REF #5 & REF #7) MUST BE REMOVED WHEN INSTALLED ON TRACTOR & SAW ADAPTER FRAME.

NOTE:

02

ID0353328

126

HYDRAULIC VALVE & SLIDE CYLINDER HYDRAULICS H342/RT55

2

1

3 5 8 11 6

10 9 7

9 4

02

ID0352995

127

HYDRAULIC VALVE & SLIDE CYLINDER HYDRAULICS H342/RT55 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11

1 HYD CONTROL VALVE (3-SPOOL) 1 HANDLE (3/8-NC, GREEN) 4 FLG LK SCREW (M8-1.25 X 25MM) 1 CYL (2.5 X 1.50 X 24.0) 1 CONNECTOR (04O-08S) 1 CONNECTOR (04O-08S90) 1 HOSE (04OFX-40"-3000) 1 HOSE (04OFX90M-19"-3000) 2 CONNECTOR (04O-06S90) 1 ABRASION SLEEVE (1.25" X 40") 1 ABRASION SLEEVE (1.25" X 20")

158-280 110-442 106-381 151-090 154-261 154-276 154-653 515-596 154-226 117-214 117-622

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

02

ID0352995

128

129

130

131

132

PLOW LIFT HYDRAULICS

3

4

2 1 1

3 9 15 6 5

14 14 4 6

9

5 7

7

2

8

8

11

10 11

12

13

3700

05

ID0124153

133

PLOW LIFT HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

151-020 154-653 154-727 154-226 154-255 154-252 154-376 154-653 115-713 115-811 154-375 154-374 154-250 514-118 125-728 125-435

QTY

2 2 2 2 2 2 2 2 2 1 2 2 1 1 8 4

DESCRIPTION

CYL (3.0" X 1.187" X 10.31") HOSE (04OFX-40"-3000) HOSE (04OFX-30"-3000) CONNECTOR (04O-06S90) UNION (04O-04OFX90) CONNECTOR (04S-04O90) BRANCH TEE (04O) HOSE (040FX-40"-3000) ABRASION SLEEVE (1.59" X 24") ABRASION SLEEVE (1.59" X 20") CONNECTOR (04O-08S, ORF .031") CONNECTOR (04O-08S, ORF .062") CONNECTOR (04O-06O45) CONNECTOR (04O-06O45, ORF) COMPOSITION BUSHING COMPOSITION BUSHING (1.375")

REMARKS

"OLD STYLE" CURRENT PRODUCTION 3700 3700

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

05

ID0124153

134

BOOM LIFT HYDRAULICS H350

5

10

6

6 10

4 1

2 3 7

6 TO VALVE A

8

9 B

9 SEE FOOTNOTE 1

02

ID0137706

135

BOOM LIFT HYDRAULICS H350

REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1. 105-821 2 FLG LK BOLT (1/4-NC X 1-3/4") 2. 115-663 1 GROMMET (1/4" X 12.7") 3. 105-832 2 FLG LOCKNUT (1/4-NC) 4. 155-623 1 HYDRAULIC LOCK VALVE 5. 151-042 1 CYLINDER (3.0 X 1.75 X 12.0) 6. 154-226 4 CONNECTOR (04O-06S90) 157-037 O-RING (-011 D90) 155-705 O-RING (-906 D90) 7. 154-856 2 HOSE (04OFX-22"-5000) 8. 154-220 2 CONNECTOR (04O-06S) 157-037 O-RING (-011 D90) 155-705 O-RING (-906 D90) 9. 154-726 2 HOSE (04O-04O90FX-15"-3000) 10. 125-773 2 COMPOSITION BUSHING

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF SAE AND ORS CONNECTOR O-RINGS.

02

ID0137706

136

137

138

WHEEL LIFT HYDRAULICS WHEEL LIFT HYDRAULICS H342

12 2 5 7 12

8

2

7 4 4

13

8

9

9 10 10 3 3 1 11 6 1

11

02

ID0196279

139

WHEEL LIFT HYDRAULICS WHEEL LIFT HYDRAULICS H342 REF PART NO. NUMBER

1.

2 3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

QTY

154-374 2 154-261 2 150-1394 2 154-783 2 154-702 2 154-682 2 154-668 2 115-811 1 154-252 2 115-777 2 154-255 2 154-376 2 154-297 2 154-401 2 125-771 4

DESCRIPTION

CONNECTOR (04O-08S,ORF) CONNECTOR (04O-08S) HYD CYL (2.0" X 1.2" X 12.2") HOSE (04OFX-24"-3000) HOSE (04OFX-30"-3000) HOSE (04OFX-17"-3000) HOSE (04OFX-32"-3000) ABRASION SLEEVE (1.59" X 20") CONNECTOR (04S-04O90) ABRASION SLEEVE (1.59" X 15") UNION (04O-04OFX90) BRANCH TEE (04O) PLUG (04O) CONNECTOR (04S-04O90, ORF) COMPOSITION BUSHING (1.25")

REMARKS

EARLY STYLE CURRENT PRODUCTION FOR 3500 3500 3700

SEE FOOTNOTE 1.

3500/3700

NOT SHOWN:

FOOTNOTES:

1. CAPS AND PLUGS WILL BE REMOVED WHEN SAW IS ATTACHED TO TRACTOR.

NOTE:

02

ID0196279

140

141

142

143

144

145

146

PLOW HYDRAULICS (H350) TO "A" ATTACHMENT HOSES PAGE

TO "D" ATTACHMENT HOSE PAGE

13

TO "B" ATTACHMENT HOSES PAGE

TO "C" ATTACHMENT HOSES PAGE TO "B" ATTACHMENT 16 VALVE PAGE

14

12 15

2 5 8

B 6

A C 10 3

7

C 10

4

1

9 3

A

B

11

5 6

07

ID0025320

147

PLOW HYDRAULICS (H350) REF PART NO. NUMBER

QTY

1. 151-029 2. 115-777 3. 154-226 4. 154-286 5. 158-744 5a. 158-286 6. 514-010 154-269 7. 125-772 8. 115-894 9. 125-773 10. 154-253 154-234 11. 154-255 12. 154-990 13. 515-312 14. 154-971 15. 154-760 16. 157-424

1 1 2 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1

DESCRIPTION

CYLINDER (3.0 X 1.5 X 10.0) ABRASION SLEEVE (1.59" X 15") CONNECTOR (04O-06S90) CONNECTOR (12O-16S90) HYD. MOTOR HYD. MOTOR CONNECTOR (12O-20S90) CONNECTOR (12S-12O) COMPOSITION BUSHING (1.5") ABRASION SLEEVE (2.38" X 60") COMPOSITION BUSHING (1.75") CONNECTOR (06S-08O90) CONNECTOR (08O-12S) UNION (04O-04OFX90) HOSE (12OFX45S-66"-4000) HOSE (04OFX90-40"-5000) HOSE (08OFX90-78"-3000) HOSE (12OFX-74"-4000) HOSE (04OFX90S-32"-5000)

REMARKS

USE SEAL REPAIR KIT 500-812 SEE FOOTNOTE 1

SEE FOOTNOTE 1

USE WITH 158-286

USE WITH 158-286

NOT SHOWN:

FOOTNOTES:

1. 158-744 ENDS WITH S/N ___________, 158-286 BEGINS WITH S/N __________.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS,

07

ID0025320

148

VIBRATOR DRIVE HYDRAULICS H331 10 8

28 22

14

26

20 8

16

7

12

30

5

24

27 30

5

29

25

10 15 23

21

6

29

10 3700 13

10

12

11 7

17

11 15

2

5 6

14

3

17 20 8

16

5

18 19

4 18

1 13 9 TO COUNTERBALANCE VALVE

10

HYDRAULIC MANIFOLD VALVE

OIL RESERVOIR 3500

09

ID0124110

149

VIBRATOR DRIVE HYDRAULICS H331

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

105-048 105-070 105-183 105-814 110-338 110-274 115-715 115-810 154-233 154-322 154-234 154-258 514-266 154-286 154-270 154-269 154-378 154-781 154-790 154-782 154-817 154-784 515-684 154-902 155-074 155-577 158-938 158-739 158-286 499-003 155-714 156-456 313-117 324-226 313-562 105-170 105-089 156-181 156-182 115-778 117-684 514-266 154-290 157-017

QTY

2 1 1 1 2 2 1 1 1 1 1 1 1 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 2 2

DESCRIPTION

BOLT (1/2-NC X 1-1/2") LOCK WASHER (1/2") BOLT (3/8-NC X 2-1/2", GD8) FLG LOCKNUT (3/8-NC) CLAMP (1.00", SOLD PER HALF) CLAMP (1-1/4", SOLD PER SET) ABRASION SLEEVE (2.07" X 42") ABRASION SLEEVE (3.66" X 60") CONNECTOR (08S-08O) CONNECTOR (08O-10S90) CONNECTOR (08O-12S) BRANCH TEE (08O-08O-08O) CONNECTOR (08O-08O90) CONNECTOR (120-16S90) CONNECTOR (12S-12090) CONNECTOR (12S-120) REDUCER STEM (120-160F) HOSE (12OFX90-62"-5000) HOSE (12OFX90-62"-4000) HOSE (12OFX90-66"-5000) HOSE (12OFX90-66"-4000) HOSE (08OFX-82"-3000) HOSE (08OFX-82"-3000) HOSE (08OFX90S-66"-3000) PLUG (08S, ALN) HYDRAULIC MOTOR HYDRAULIC MOTOR HYDRAULIC MOTOR HYDRAULIC MOTOR SEAL REPAIR KIT O-RING (021-D90) HYD LINE (-16) BRACKET (HARD LINE) BACKUP SPACER HOSE BRACKET BOLT (5/16-NC X 3") LOCKNUT (5/16-NC) ADAPTER LINE (PRESSURE) ADAPTER LINE (RETURN) ABRASION SLEEVE (3.66" X 20") ABRASION SLEEVE (1.00" X 26") CONNECTOR (08O-08O90) UNION (16OFX90) O-RING (018 D90)

REMARKS

USED ON 3700

USED WITH 158-739 USED WITH 158-286 3700

USED WITH 158-286

3700 ENDS WITH S/N ________ ENDS WITH S/N ________ ENDS WITH S/N ________ BEGINS WITH S/N ________

3700 3700 3700 3700 3700 3700 3700 3700 3700

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RING.

09

ID0124110

150

DIGGING CHAIN DRIVE HYDRAULICS H311

10

12

PRESSURE RETURN

11 8

CASE DRAIN

4

ATTACHMENT FLUSHING

3700

8

6 9 2

7 10 7

11

9 12

12 8

10

4

16

8

6

19

14 1

TO TANK RETURN

17

3

18

21

11 13

5 15 20

03

ID0140752

151

DIGGING CHAIN DRIVE HYDRAULICS H311

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

QTY

DESCRIPTION

106-117 10 BOLT (M12-1.75 X 80mm) 115-778 1 ABRASION SLEEVE (3.66" X 20") 117-615 1 ABRASION SLEEVE (3.66" X 30") 154-220 1 CONNECTOR (04O-06S) 154-233 1 CONNECTOR (08O-08S) 154-254 1 CONNECTOR (08S-08O90,XLG) 154-261 1 CONNECTOR (04O-08S) 154-287 2 CONNECTOR (16O-16S90) 154-371 2 CONNECTOR (16O-12S45) 154-306 2 CONNECTOR (12S-16O) 154-983 1 HOSE (16OFX45-31"-5000) 154-688 1 HOSE (16OFX45-29.5"-5000) 154-689 1 HOSE (16OFX45-25.5"-5000) 154-983 2 HOSE (16OFX45-31"-5000) 154-705 1 HOSE (04OFX90-60"-3000) 154-727 1 HOSE (04OFX90-30"-3000) 154-709 1 HOSE (08OFX-38"-3000) 154-747 1 HOSE (O80FX45-21"-3000) 515-178 1 HOSE (O80FX45S-28"-3000) 155-198 1 S/O COUPLER (12S-12H90-06SF) 157-026 1 O-RING (172 D70) 158-313 1 TRIPLE HYD PUMP 500-554 SEAL KIT 158-360 1 DOUBLE HYD PUMP 158-351 1 AUXILIARY HYD PUMP 158-459 1 HYD PUMP 158-564 1 HYD MANIFOLD VALVE 150-4390 1 HYD MOTOR 154-720 1 HOSE (08OFX-20"-3000) 154-274 1 CONNECTOR (08O) 500-721 1 PUMP DRIVE SHAFT 500-555 SEAL KIT 105-1087 2 SET SCREW (M12-1.75 X 12MM)

REMARKS

SEE FOOTNOTE 4, 5, AND 6 3700

BEGINS WITH S/N 3G0654 ENDS WITH S/N 3G0653 BEGINS WITH S/N 3G0654 ENDS WITH S/N 3G0653 3700 3700 SEE FOOTNOTE 1-ENDS WITH S/N 3G0653 CURRENT PRODUCTION & BEGINS WITH S/N 3G0654 3700

OBSOLETE OBSOLETE OBSOLETE SEE FOOTNOTE 3

SEE FOOTNOTE 4, 5, 6, AND 7.

SEE FOOTNOTE 5

FOOTNOTES:

1. EARLY SYSTEM USED SINGLE HOSE FROM HYD MOTOR TO HYD RESERVOIR. IF REPLACEMENT IS REQUIRED IT IS RECOMMENDED THAT CONNECTOR AND HOSES (REF #'S 12, 18, & 19), DENOTED WITH FOOTNOTE 2, BE SUBSTITUTED FOR SINGLE HOSE. 2. TRIPLE HYD PUMP AND AUXILARY HYD PUMP ARE NO LONGER AVAILABLE. WHEN REPLACING THESE HYD PUMPS, WITH DOUBLE AND AUXILARY HYD PUMPS, MODIFICATIONS OF PUMP SUPPORT PLATE AND NEW HYD CONNECTORS ARE REQUIRED. REFER TO INSTALLATION DIAGRAM 051-002.

3. SEAL REPAIR KIT 500-966 4. REPLACES 158-704 HYDRALIC MOTOR, 158-704 REQUIRES 12X 106-117 BOLT (M12-1.75 X 80MM).

5. PLUG UNUSED THREADED HOLES WITH 2X 105-1087 SET SCREW (M12-1.75 X 12MM) (N/A WITH 158-704 HYDRAULIC MOTOR).

6. INSTALL BOLTS WITH SILICONE, TORQUE TO 95 FT/LBS. 7. FOR 150-4390 USE SEAL KIT 500-3455, FOR 158-704 USE SEAL REPAIR KIT 500-547.

NOTE:

REFER TO O-RING CHART(800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

03

ID0140752

152

DIGGING CHAIN DRIVE HYDRAULICS H312

9 7 7 20

11 5

D

6

A

22 4

A

C

B

D

10

20

B

6

C

21

3700

23

C

11

A

9 5 7

D

12 7

A

B

10 6

C

13

6

4

8

3

15 13

2 16

1

14 10

24

14 B

C

D

A

11 19 18 17

3500

05

ID0106252

153

DIGGING CHAIN DRIVE HYDRAULICS H312

REF PART NO. NUMBER

QTY

DESCRIPTION

1.

150-4390 1 HYD MOTOR 500-1934 8 PISTON 500-1935 8 PISTON RINGS 2. 106-117 10 SCREW (M12-1.75 X 80MM) 3. 157-026 1 O-RING (172 D70) 4. 154-233 1 CONNECTOR (08O-08S) 5. 154-261 1 CONNECTOR (04O-08S) 6. 154-371 2 CONNECTOR (16O-12S45) 7. 154-768 2 HOSE (16OFX-54"-5000) 8. 324-226 1 BACKUP SPACER 9. 115-789 1 ABRASION SLEEVE (3.66 X 54") 10. 154-770 1 HOSE (08OFX45-66"-3300) 154-853 1 HOSE (08O-58"-3300) 11. 154-771 1 HOSE (04OFX90-110"-3000) 154-705 1 HOSE (04OFX90-60"-3000) 12. 105-883 2 FLG LOCK BOLT (3/8-NC X 2") 13. 110-338 2 CLAMP (1") 14. 156-456 2 HYD HARD LINE (1.00") 15. 313-117 1 BRACKET (HARD LINE) 16. 105-047 2 LOCKNUT (3/8-NC) 17. 154-254 1 CONNECTOR (08O-08S90) 18. 155-198 1 S/O COUPLER (12S-12H90-06SF) 19. 154-287 2 CONNECTOR (16O-16S90) 20. 154-290 2 UNION (16OF-16O90) 21. 154-410 1 CONNECTOR (04O-04O90) 22. 514-266 1 CONNECTOR (08O-08O90) 23. 117-671 1 ABRASION SLEEVE (1.00" X 12") 24. 105-1087 2 SET SCREW (M12-1.75 X 12MM)

REMARKS

SEE FOOTNOTE 1, 2, 3, AND 4 INCLUDES PISTON RINGS SEE FOOTNOTE 1, 2, AND 3

3700 3700

3700 3700 3700 3700 SEE FOOTNOTE 2

SEE FOTENOTE 1, 2, AND 3

NOT SHOWN:

FOOTNOTES:

1. REPLACES 158-704 HYDRAULIC MOTOR, 158-704 REQUIRES 12X 106-117 BOLT (M12-1.75 X 80MM).

2. PLUG UNUSED THREADED HOLES WITH 2X 105-1087 SET SCREW (M12-1.75 X 12MM) (N/A WITH 158-704 HYDRAULIC MOTOR) 3. INSTALL BOLTS W/ SILICONE, TORQUE TO 95 FT/LBS. 4. FOR 150-4390 USE SEAL KIT 500-3455, FOR 158-704 USE SEAL REPAIR KIT 500-547.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

05

ID0106252

154

WHEEL DRIVE HYDRAULICS 3 1 1 10 2

4

5 8

9

6

10 3700 8 6 7 3

1

5 6

2 TO COUNTERBALANCE VALVE

4 7

1

6

OIL RESERVOIR HYDRAULIC MANIFOLD VALVE

3500

06

ID0126481

155

WHEEL DRIVE HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

QTY

154-785 2 154-784 1 515-684 1 115-812 1 154-258 1 514-266 154-253 1 154-287 2 155-593 1 500-464 500-684 106-324 166-829 500-685 500-2065 154-290 2 154-331 1 154-334 2

DESCRIPTION

REMARKS

HOSE (16OFX-78"- 4000) HOSE (08OFX-82"- 3000) HOSE (08OFX-82"- 3000) ABRASION SLEEVE (3.66" X 83") TEE (08O-08O-08O) CONNECTOR (08O-08O90) CONNECTOR (06S-08090) CONNECTOR (16S-16O90) HYDRAULIC MOTOR SEAL REPAIR KIT SEAL KIT CASTLE JAM NUT KEY (9/16" X 2") MOTOR SHAFT KIT, HOUSING, BEARING UNION (16O-16OFX90) PLUG (08O) PLUG (16O)

SEE FOOTNOTE 1.

SEE FOOTNOTE 1.

NOT SHOWN:

FOOTNOTES:

1. CAPS AND PLUGS WILL BE REMOVED WHEN SAW IS ATTACHED TO TRACTOR.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

06

ID0126481

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

HYDRAULIC CYLINDER 2.0" X 1.25" X 12.2"

2

3

7

4 5 1 6

01

ID0214071

179

HYDRAULIC CYLINDER 2.0" X 1.25" X 12.2" REF PART NO. NUMBER

1 2 3 4 5 6 7

150-1394 150-1391 150-778 150-1393 106-097 150-771 150-770 190-169

QTY

1 1 1 1 1 1 1

REMARKS

DESCRIPTION

CYLINDER (2.0" X 1.25" X 12.2") CYLINDER ROD (1.25 X 12.2) LOCK RING (2.0) CYLINDER BARREL (2.0 X 12.2) FLG BOLT (5/8-NC X 1-3/4",GD8) CYLINDER PISTON (2.0 X 1.25) CYLINDER HEAD (2.0 X 1.25) SEAL REPAIR KIT (2.0" X 1.25")

INCLUDE REF NO.'S 1 THRU 7

SEE FOOTNOTE 1 INCLUDES MOLDED-ON WEAR RING INCLUDES REF NO.'S 4 & 5

NOT SHOWN:

259-100 259-236 259-239 259-241 259-188

U-SEAL INSTALLER (1"-1.499") WIPER INSTALLER (1.250") WIPER/SEAL INSTALLER (2") PISTON INSTALLER (2") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. APPLY LOCTITE 271 OR 277. TORQUE TO 180-200 FT-LBS (245-270 N.M.)

NOTE:

01

ID0214071

180

181

182

183

184

185

186

NOTES:

ID0134963

H300 Series Parts Manual

Issue 29, volume 2 of 2

053-417

187

ACCESSORIES

188

AUGER 3 9

15 11

5

17

4

14 18

1 7 13

1

1 6

6 18

13

14

12

17 OPTION

2 15

16

10

8

03

ID0126501

189

AUGER REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

QTY

105-021 8 105-043 4 105-391 AR 105-953 AR 115-001 AR 125-620 2 142-031 1 145-071 1 145-109 1 145-110 1 145-293 1 145-244 1 145-291 1 145-245 1 145-290 2 143-021 2 184-189 2 184-188 1 105-002 4 184-076 4

DESCRIPTION

NUT (1/2-NC) BOLT (1/2-NC X 1-1/4") BOLT (3/4-NC X 4-1/2") LOCKNUT (3/4-NC, GD 8) ZERK (1/8-NPT, STR) FLG BEARING (1.75" HEX ID) AUGER DRIVE SPROCKET (2"P,14T) LEFT LONG AUGER (26") RIGHT SHORT AUGER (13") LEFT SHORT AUGER (13") DOUBLE AUGER SHAFT (19.9") DOUBLE AUGER SHAFT (23.4") SINGLE AUGER SHAFT (15") SINGLE AUGER SHAFT (18.6") BEARING PLATE ZERK GUARD SPACER (1.6") SPACER (2.9") BOLT (1/2 X 2-1/4") BUSHING

REMARKS

SEE FOOTNOTE 3

OBSOLETE, SEE FOOTNOTE 2 OBSOLETE, SEE FOOTNOTE 2 SEE FOOTNOTE 3

SEE FOOTNOTE 3

NOT SHOWN:

181-831

1

REPLACEMENT SLEEVE (2.5" X 6")

SEE FOOTNOTE 1

FOOTNOTES:

1-THE REPLACEMENT SLEEVE IS USED WHEN A DOUBLE AUGER SHAFT IS USED AS A SINGLE AUGER SET-UP. 2-EARLY STYLE AUGER SHAFTS (REF NO.'S 11 AND 12) ARE NO LONGER AVAILABLE. PRESENT PRODUCTION AND REPLACEMENT SHAFTS REQUIRE USE OF SPACERS (REF NO.'S 15 OR 16).

3-TO BE USED WHEN OPERATING ATTACHMENT IN THE FULL SIDE POSITION, WITH THE SINGLE AUGER.

NOTE:

03

ID0126501

190

ROLLER BOOM 2P

HIGH HEADSHAFT H300/H313/H400/M500/H552/H514/H515/H553

12

3 1 12

7 6

11 10

4 9

2 9 5 8 11

ID0025105

191

ROLLER BOOM 2P

HIGH HEADSHAFT H300/H313/H400/M500/H552/H514/H515/H553 REF PART NO. NUMBER

QTY

141-491 143-050 143-060 143-051 143-061 141-488 142-751 151-053 180-448 115-003 115-165 125-209 115-165 115-019 105-313 180-062 115-276 159-093 115-001

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

1 1 1 1 1 1

1 1 1 1 2 1 1 2

DESCRIPTION

REMARKS

BOOM ASSEMBLY 42" LT ROLLER BOOM (2.000"P) 48" LT ROLLER BOOM (2.000"P) 3' BOOM (2.000"P, 47.21") BOOM (59.21") 2P-5FT BOOM LT ROLLER (2.000"P, 14.5") CYL (1.5" X 1.5" X 8.375") IDLER SHAFT (1.25" X 3.50") ZERK (1/4-NF, STR) PLUG (08N, SOC) TAPERED BEARING/RACE (1.250") PLUG (08N, SOC) ZERK (02N) IDLER NUT (1-1/4-NF) DIRT SHIELD REDUCER (16N-08NF) RELIEF VALVE (5/8-NF, 02N) ZERK (02N)

INCL REF NO.'S 1 THRU 12, USES 108 P INCL REF NO.'S 1 THRU 12, USES 84 P INCL REF NO.'S 1 THRU 12, USES 96 P

INCL'S REF NO. 5 AND 9

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. REFER TO REPLACEMENT DIAGRAM 052-519

NOTE:

11

ID0025105

192

BOOM

1 4

2

3

01

ID0138873

193

BOOM REF PART NO. NUMBER

1.

2.

3.

4.

140-124 140-125 140-330 140-126 140-129 140-765 140-766 140-758 140-751 105-367 105-419 140-114 140-267 140-121 140-115 140-120 140-328 140-116

QTY

2 2 1 2 1 2 1 1 1 2 2 1 2 1 1

DESCRIPTION

BOOM PARTS ASS'Y (42.8 2P) BOOM PARTS ASS'Y (58.8 2P) BOOM PARTS ASS'Y (70.9 2P) BOOM PARTS ASS'Y (83.0 2P) BOOM PARTS ASS'Y (83.0 3P) SLIDE AND STOP SLIDE AND STOP SIDE PLATE SLIDE AND STOP SLIDE PLATE LOCKNUT (1-NC) BOLT (1-NC X 4") BOOM (44") SIDE PLATE ROCK GUARD BOOM (60.5") SIDE PLATE BOOM (70-7/8") BOOM (83")

REMARKS

FOR 2" P FOR 3" P

WELD-ON WELD-ON WELD-ON

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0138873

194

BOOM

2" PITCH 2200, 2300, 2310, 3610, H311 & H312 16

22

20

1 17

23 24 25

7

22 8 11

2

10 9 6

3

18 19 4

12

14

21

13 21

23

15

24 25

14

5

08

ID0109834

195

BOOM

2" PITCH 2200, 2300, 2310, 3610, H311 & H312 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

140-241 143-087 140-248 143-089 140-007 140-205 140-765 140-766 150-058 115-019 150-191 150-340 157-078 155-712 140-654 140-707 180-062 125-209 105-367 105-419 140-021 140-013 140-588 140-585 179-062 180-448 105-313 115-003 115-165

QTY

1 1 2 2 1 2 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

STD BOOM PARTS ASS'Y (36") GREASE BOOM PARTS ASS'Y (36") 3' STD BOOM 3' GREASE BOOM BOOM SIDE PLATE ROCK GUARD SLIDE & STOP SLIDE & STOP SIDE PLATE GREASE CYLINDER ZERK (02N) CYLINDER BARREL CYLINDER ROD O-RING (222 D70) BACK-UP RING (222 D90) IDLER SPROCKET PARTS ASS'Y SPROCKET (2.00" A9) DIRT SHIELD TAPERED BEARING ASS'Y LOCKNUT (1-NC) BOLT (1-NC X 4") SPRING BOOM SLEEVE 1' BOOM EXTENSION 2' BOOM EXTENSION TAIL SPROCKET SHAFT (3.00") IDLER SPROCKET SHAFT (3.75") JAM NUT (1-1/4 NF) ZERK (1/4-NF, STR) PLUG (08N, ALN)

REMARKS

INCL REF NO'S 1,4,12,21,22,18,19; SEE F/N 1 & 2 INCL REF NO'S 1,4,6,12,21,22,16 - 19; SEE F/N 1 & 2 INCL REF NO'S 2 - 3; SEE F/N 1 & 2 INCL REF NO'S 2 - 3; SEE F/N 1 & 2 WELD ON; SEE F/N 6 WELD ON INCL REF NO 5 WELD ON, SEE F/N 6 INCL REF NO'S 7 - 11

INCL REF NO'S 13 - 15

SEE F/N 5

SEE FOOTNOTE 3 & 7 SEE FOOTNOTE 4 & 7 INCL REF NO'S 23 - 25

USE PLUG WRENCH 259-099

NOT SHOWN:

140-056 259-099

KEY (3/8" SQ X 1-1/2") PLUG WRENCH (3/8")

FOOTNOTES:

1. USED WITH EARLY STYLE PIVOTS. 2. 2200,2300,2310,3610 USES 68P OF 50K DIG CHAIN. H311 USES 72P OF 50K DIG CHAIN. 3. 2200,2300,2310,3610 USES 80P OF 50K DIG CHAIN. H311 USES 84P OF 50K DIG CHAIN. 4. 2200,2300,2310,3610 USES 92P OF 50K DIG CHAIN. H311 USES 96P OF 50K DIG CHAIN. 5. FOR BEARING DRIVER REFER TO SPECIAL TOOL DIAGRAM 052-519.

6. WELD KEY (140-056) ON LEFT SIDE 7. 1' & 2' BOOM EXTENSIONS 140-588 & 140-585 HAVE A 2" SQUARE MALE STUB END. THEY WILL NOT FIT PROPERLY IN 2" SQUARE INSIDE BOOMS, AND ALSO WILL NOT FIT NEW BOLT ON PIVOT STUBS 140-540, 143-116, 143-184 & PIVOT 145-845.

NOTE:

08

ID0109834

196

BOOM-WEAR BAR

2" PITCH W/GREASE CYLINDER

10

5

14

11

13

3

4 8

4 12

1 15

9 12

18

2

19 20 21

16

17

04

ID0113142

197

BOOM-WEAR BAR

2" PITCH W/GREASE CYLINDER REF PART NO. NUMBER

140-616 140-622 105-313 115-003 140-021 125-209 143-341 143-343 105-419 105-367 140-013 140-707 140-654 140-765 140-766 180-062 180-448 140-588 140-585 115-165 150-058 115-019 150-191 155-711 155-712 150-340

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

QTY

1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

44" BOOM PARTS ASS'Y (2P) 60.5" BOOM PARTS ASS'Y (2P) JAM NUT (1-1/4-NF) ZERK (1/4-NF, STR) BOOM SPRING TAPERED BEARING (1.250") 44" BOOM 60.5" BOOM BOLT (1-NC X 4") LOCKNUT (1-NC) BOOM SLEEVE SPROCKET (2.000"A9) IDLER SPROCKET (2.000"A9) SLIDE AND STOP SLIDE AND STOP SIDE PLATE DIRT SHIELD IDLER SHAFT (1.25" X 3.75") 1' HD BOOM EXTENSION 2' BOOM EXTENSION PLUG (08N, ALN) GREASE CYL (1.5" X 1.5" X 8.375") ZERK (02N) CYLINDER BARREL O-RING (222 D70) BACKUP RING (222 D90) CYL ROD (1-1/2" X 10")

REMARKS

INCL REF NO'S 1-3,5,8,10,13,15 & 16 INCL REF NO'S 1,5-10,13,16 & 17

SEE FOOTNOTE 1 INCL REF NO'S 6 & 7

INCL REF NO'S 4,9 & 12 INCL REF NO. 11

INCL REF NO'S 2 & 4 SEE FOOTNOTE 2 SEE FOOTNOTE 2 INCL REF NO'S 17 THRU 21

NOT SHOWN:

259-099

PLUG WRENCH - 3/8" DRIVE

FOOTNOTES:

1. FOR BEARING DRIVER REFER TO SPECIAL TOOL DIAGRAM 052-519.

2. 1' & 2' BOOM EXTENSIONS 140-588 & 140-585 HAVE A 2" SQUARE MALE STUB END. THEY WILL NOT FIT PROPERLY IN 2 1/2" SQUARE INSIDE BOOMS, AND ALSO WILL NOT FIT NEW BOLT ON PIVOT STUBS 140-540, 143-116, 143-184 & PIVOT 145-845

NOTE:

04

ID0113142

198

BOOM-WEAR BAR

2" PITCH W/GREASE CYLINDER 2310 & 3610 / H311 & H312

10

7 5

6

14

1

13

3

4 8

4 12

1 15

9 12

18

2

19 20 21

16

17

06

ID0109835

199

BOOM-WEAR BAR

2" PITCH W/GREASE CYLINDER 2310 & 3610 / H311 & H312 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

143-088 105-313 115-003 140-021 125-209 143-090 105-419 105-367 140-013 140-707 140-654 140-765 140-766 180-062 180-448 140-588 140-585 115-165 150-058 115-019 150-191 157-078 155-712 150-340

QTY

2 2 1 2 1 1 1 1 2 1 4 2 1 1 1 1 1 1 1 1 1

DESCRIPTION

36" BOOM PARTS ASS'Y (2P) JAM NUT (1-1/4-NF) ZERK (1/4-NF, STR) BOOM SPRING TAPERED BEARING (1.250") 3' BOOM BOLT (1-NC X 4") LOCKNUT (1-NC) 3' BOOM SPROCKET (2.000"A9) IDLER SPROCKET (2", A9) SLIDE AND STOP SLIDE AND STOP SIDE PLATE DIRT SHIELD IDLER SHAFT (1.25" X 3.75") 1' BOOM EXTENSION 2' BOOM EXTENSION PLUG (08N, ALN) GREASE CYLINDER ZERK (02N) CYLINDER BARREL O-RING (222 D70) BACKUP RING (222 D90) CYLINDER ROD

REMARKS

INCL REF NO'S 1-3,5,8,10,13,15,16,22 & 23;

SEE FN 2

SEE FOOTNOTE 1 INCL REF NO'S 6 & 7

INCL REF NO'S 4,9 & 12 INCL REF NO. 11

INCL REF NO'S 2 & 4 SEE FOOTNOTE 3 SEE FOOTNOTE 3 INCL REF NO'S 17 THRU 21

NOT SHOWN:

259-099

PLUG WRENCH

FOOTNOTES:

1. FOR BEARING DRIVER REFER TO SPECIAL TOOL DIAGRAM 052-519.

2. USED WITH EARLY STYLE PIVOTS 3. 1' & 2' BOOM EXTENSIONS 140-588 & 140-585 HAVE A 2" SQUARE MALE STUB END. THEY WILL NOT FIT PROPERLY IN 2 " SQUARE INSIDE BOOMS, AND ALSO WILL NOT FIT NEW BOLT ON PIVOT STUBS 140-540, 143-116, 143-184 & 145-845 NOTE:

06

ID0109835

200

LARGE TAIL SPROCKET & TAIL BOOM 2200, 2300, 2310, 3610 & H311

14 2 9 4 3

4 5

12 13

10

11 FOOTNOTE 1

8 11

7 6

01

1

ID0139177

201

LARGE TAIL SPROCKET & TAIL BOOM 2200, 2300, 2310, 3610 & H311 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

140-607 140-502 140-515 140-608 140-506 140-508 105-313 105-833 105-472 106-033 106-034 115-009 115-165 125-209 140-604 140-503 140-509 142-021 142-020 180-062 180-448 142-752 142-751 143-121

QTY

1 2 2 4 2 1 1 1 1 1 1 1 2 1 1 1

DESCRIPTION

REMARKS

LT ROLLER BOOM (35.95") LT ROLLER BOOM (47.95") LT ROLLER BOOM (59.2") LT SPROCKET BOOM (35.95") LT SPROCKET BOOM (47.95") LT SPROCKET BOOM (59.2") JAM NUT (1-1/4-NF) FLANGE LOCKNUT (1/2-NC) BOLT (1/2-NC X 5") JAM NUT (1-NC) SET SCREW (1-NC X 6", SQ) ZERK (1/4-NF, STR XL) PLUG (O8N, ALN) TAPERED BEARING (1.250") BOOM (35.95") BOOM (47.95") BOOM (59.2") LT SPROCKET (2.000"B24) LT SPROCKET PARTS ASS'Y DIRT SHIELD IDLER SHAFT (1.25" X 3.75") LT ROLLER (2.000"P, 14.5") LT ROLLER PARTS ASS'Y BOOM SPACER

INCL REF NO'S 1 THRU 9, 11 THRU 13. SEE FN 5,6 INCL REF NO'S 1 THRU 9, 11 THRU 13. SEE FN 3,6 INCL REF NO'S 1 THRU 9, 11 THRU 14. SEE FN 4,6 INCL REF NO'S 1 THRU 12. SEE FOOTNOTE 5,6 INCL REF NO'S 1 THRU 12. SEE FOOTNOTE 1,3,6 INCL REF NO'S 1 THRU 12. SEE FOOTNOTE 1,4,6

SEE FOOTNOTE 1 INCL REF NO'S 8,10,& 11. SEE FOOTNOTE 1 INCL REF NO'S 6 & 7 SEE FOOTNOTE 7 INCL REF NO'S 8,11, & 13 SEE FOOTNOTE 2

NOT SHOWN:

259-099

PLUG WRENCH -…" DRIVE

FOOTNOTES:

1. LT SPROCKET AND LT SPROCKET BOOM PARTS ASS'Y ARE AVAILABLE FOR FIELD INSTALLATION ONLY. 2. USED ON 140-515 (LT ROLLER BOOM PARTS ASSEMBLY) ONLY 3. 2200, 2300, 2310, 3610 USES 68 P, H311 USES 72 P 4. 2200, 2300, 2310 USES 80 P, H311 USES 84 P 5. 3610 USES 56P, H311 USES 60P 6. USED WITH EARLY STYLE PIVOTS 7. 142-752 LT ROLLER IS FOR PART ONLY. NOTE:

01

ID0139177

202

LARGE TAIL ROLLER BOOM LOW HEADSHAFT H300/H313/H400/3610

3 12 1 12 4

7 6

9 11 10 2 9

5 8

08

ID0127116

203

LARGE TAIL ROLLER BOOM LOW HEADSHAFT H300/H313/H400/3610 REF PART NO. NUMBER

QTY

DESCRIPTION

143-181 3' LT ROLLER BOOM (2"P) 143-180 4' LT ROLLER BOOM (2"P) 1. 143-138 1 3' BOOM 143-139 1 4' BOOM 2. 142-751 1 LT ROLLER (2.000"P, 14.5") 3. 151-053 1 CYL (1.5" X 1.5" X 8.375") 4. 180-448 1 IDLER SHAFT (1.25" X 3.50") 115-003 ZERK (1/4-NF, STR) 115-165 PLUG (08N, SOC) 5. 125-209 1 TAPERED BEARING/RACE (1.250") 6. 115-165 1 PLUG (08N, SOC) 7. 115-019 1 ZERK (02N) 8. 105-313 1 JAM NUT (1-1/4-NF) 9. 180-062 2 DIRT SHIELD 10. 115-276 1 REDUCER (16N-08NF) 11. 159-093 1 RELIEF VALVE (5/8-NF, 02N) 12. 115-001 2 ZERK (O2N)

REMARKS

INCL REF NO'S 1 THRU 12; USE 80P INCL REF NO'S 1 THRU 12; USE 84P USE 80P USE 84P INCL REF NO'S 5 & 9

NOT SHOWN:

FOOTNOTES:

NOTE:

08

ID0127116

204

PERSONNEL RESTRAINT 2P

7

OPTION 6 2

4

8

5

1 8 3

03

ID0139700

205

PERSONNEL RESTRAINT 2P

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

QTY

105-386 2 106-480 2 106-442 4 105-994 4 105-340 4 106-851 2 106-191 2 107-337 2 107-720 2 141-268 1 141-274 1 140-0008 1 141-354 1 141-350 1 141-276 1 141-371 1 141-373 1 141-277 1 141-372 1 141-374 1 141-280 1 106-949 4

DESCRIPTION

BOLT (5/8-NC X 4-1/2") SCREW (M16-2.00 X 110mm, 10.9) FLG LOCKNUT (M16-2.00, PRV TRQ) FLG LOCKNUT (5/8-NC) FLG LOCKNUT (3/4-NC) LOCKNUT (M18-2.5) BOLT (5/8-NC X 6", GD8) SCREW (M16-2.00 X 150mm, 10.9) SCREW (M18-2.5 X 160mm, 10.9) RESTRAINT BAR (46", 2P) RESTRAINT BAR (56", 2P) RESTRAINT BAR (60", 2P) RESTRAINT BAR (69", 2P) RESTRAINT BAR (80.5", 2P) LEFT MOUNT BRACKET LEFT MOUNT BRACKET (12") LEFT MOUNT BRACKET (16") RIGHT MOUNT BRACKET RIGHT MOUNT BRACKET (12") RIGHT MOUNT BRACKET (16") SUPPORT SPACER WASHER (3/4", HARDENED)

REMARKS

H313, H314, H514 M552 LOWER MOUNT BRACKET ONLY; TORQUE TO 650 FT-LBS H514 LOWER MOUNTING BOLTS H313, H314 H514, SEE FOOTNOTE 2 ROLLER BOOM ROLLER BOOM (FOR 3' AND 44" BOOM) ROLLER BOOM (FOR 4' BOOM) STANDARD BOOM "& 5'-50K ROLLER BOOM" STANDARD BOOM (FOR 5' BOOM) 3610 3610 3610 3610 SEE FOOTNOTE 1 H514, SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. WHEN H312 OR H314 ATTACHMENT IS USED IN AN OFFSET POSITION THE RIGHT MOINT BRACKET WILL BE REPLACED BY REF. NO. 7 (41-280) SUPPORT SPACER 2. EARLY PRODUCTION UNITS USED 107-688 WITH TWO HARDENED WASHERS. CURRENT PRODUCTION UNITS USE 107-720 WITH FOUR HARDENED WASHERS

NOTE:

03

ID0139700

206

TRENCH CLEANER 2P

17

16

12 6

14 19

1

9

5

2

6 13 15

3

20 4 3 8 10

18

11

3

7

04

ID0139175

207

TRENCH CLEANER 2P

REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

QTY

190-2406 190-2604 105-065 3 105-071 2 183-179 4 105-279 2 105-386 2 106-191 2 106-480 2 105-994 4 105-340 2 106-442 4 106-851 2 106-191 2 105-464 2 107-337 2 107-720 2 115-503 8 115-602 2 115-1018 2 141-109 2 141-215 1 141-134 1 141-135 1 141-136 1 141-137 1 140-1357 1 140-1358 1 141-211 1 141-132 1 140-1361 1 140-1365 1 140-1352 1 140-1363 1 140-1369 1 140-1354 1 140-1356 1 141-276 1 141-371 1 141-373 1 141-277 1 141-372 1 141-374 1 141-280 3 106-949 4 105-884 2 115-0005 2

DESCRIPTION

MECH CLEANER CONV KIT (ROLLER BOOM) MECH CLEANER CONV KIT (STD BOOM) LOCKNUT (1/2-NC) WASHER (1/2") PIN CARRIAGE BOLT (1/2-NC X 3") BOLT (5/8-NC X 4-1/2") BOLT (5/8-NC X 6", GD8) SCREW (M16-2.0 X 110mm, 10.9) FLG LOCKNUT (5/8-NC) FLG LOCKNUT (3/4-NC) FLG LOCKNUT (M16-2.00,PRV TRQ) LOCKNUT (M18-2.5) BOLT (5/8-NC X 6", GD8) BOLT (3/4-NC X 7", GD8) SCREW (M16-2.00 X 150mm, 10.9) SCREW (M18-2.5 X 160mm, 10.9) KLIP RING (3/4") EXTENSION SPRING EXTENSION SPRING REAR LINK CLEANER SHOE 4" CLEANER SHOE 6" CLEANER SHOE 8" CLEANER SHOE 10" CLEANER SHOE 12" SHOE BEAM (LTS) SHOE BEAM (STD) FRONT LINK FRONT LINK 3' LOWER CLEANER BAR (2.000" P) 3' LOWER CLEANER BAR (2.000" P) 3' LOWER CLEANER BAR (2.000" P) 4' LOWER CLEANER BAR (2.000" P) 4' LOWER CLEANER BAR (2.000" P) 4' LOWER CLEANER BAR (2.000" P) 5' LOWER CLEANER BAR (2.000" P) LEFT MOUNT BRACKET LEFT MOUNT BRACKET (12") LEFT MOUNT BRACKET (16") RIGHT MOUNT BRACKET RIGHT MOUNT BRACKET (12") RIGHT MOUNT BRACKET (16") SUPPORT SPACER WASHER (3/4", HARDENED) WASHER (.531") EXTERNAL SNAP RING (0.500")

REMARKS

INCL REF NO'S 1-4,8-10,12,13, 19 & 20; SEE F/N 1 INCL REF NO'S 1-4,8-10,12,13, 19 & 20; SEE F/N 1

M552 H313, H314, H514 M552 LOWER MOUNT BRACKET ONLY; TORQUE TO 650 FT-LBS H313, H314, H514 (2) H514 LOWER MOUNTING BOLTS M552 H313, H314 H514, SEE FOOTNOTE 4 OLD STYLE; SEE FOOTNOTE 6 SEE FOOTNOTES 5 & 6

ROLLER BOOMS; SEE FOOTNOTE 6 STANDARD BOOMS; SEE FOOTNOTE 6 ROLLER BOOMS STANDARD BOOMS ROLLER BOOMS; SEE FOOTNOTES 3 & 6 ROLLER BOOMS; SEE FOOTNOTES 2 & 6 STANDARD BOOM; SEE FOOTNOTES 2 & 6 ROLLER BOOMS; SEE FOOTNOTES 3 & 6 ROLLER BOOMS; SEE FOOTNOTES 2 & 6 STANDARD BOOM; SEE FOOTNOTES 2 & 6 STANDARD BOOM; SEE FOOTNOTES 2 & 6 3610 3610 3610 3610 M552 H514, SEE FOOTNOTE 4 SEE FOOTNOTE 6 SEE FOOTNOTE 6

FOOTNOTES:

1. REFER TO INSTALLATION DIAGRAM 050-926 2. H311 BEGINS WITH S/N 8K0126; H411 BEGINS WITH S/N 3M0693; H313 3. H312, H412, H314, H514, H450, H552, M552 4. EARLY PRODUCTION UNITS USED 107-688 W/ TWO HARDENED WASHERS. CURRENT PRODUCTION UNITS USE 107-720 W/ FOUR HARDENED WASHERS 5. INSTALL SPRING 115-1018 SO THAT OPEN ENDS OF THE COILS ARE FACING IN TOWARDS THE CLEANER BAR AND SHOE BEAM. 6. IF REPLACING OLD SPRINGS, CLEANER BAR OR SHOE BEAM, USE NEW CLEANER BAR AND SHOE BEAM SHOWN ON THIS PAGE, & INSTALL TRENCH CLEANER SPRING KIT 190-2669.

NOTE:

04

ID0139175

208

TRENCH CLEANER

3 2

11

2 21 1 6 22 23 18 7

20 19

8 18

7

2 1

3 17 2

5

15 7

9

17

7

7

2 10

1

13

7 17

12

4 7

7

14

16

14 17

04

ID0109831

209

TRENCH CLEANER REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

QTY

100-150 100-151 105-065 3 105-071 4 105-136 1 105-279 2 106-034 2 105-111 2 115-503 8 115-1018 2 141-195 1 141-098 1 141-366 141-097 141-099 141-100 141-101 1 141-209 1 141-103 141-190 141-105 141-213 141-107 141-109 2 141-132 1 141-211 1 141-215 141-134 141-135 141-136 141-137 141-138 141-139 183-179 4 106-033 2 105-472 2 105-833 2 141-200 1 105-884 4 115-0005 4

DESCRIPTION

REMARKS

MECHANICAL CLEANER CONV KIT MECHANICAL CLEANER CONV KIT LOCKNUT (1/2-NC) WASHER (1/2") BOLT (1/2-NC X 3-1/2") CARRIAGE BOLT (1/2-NC X 3") SET SCREW (1-NC X 6", SQ) BOLT (1/2-NC X 4") KLIP RING (.750") EXTENSION SPRING CLEANER SUPPORT CLAMP 2' PERSONNEL RESTRAINT BAR 3' PERSONNEL RESTRAINT BAR 4' PERSONNEL RESTRAINT BAR 5' PERSONNEL RESTRAINT BAR SHOE BEAM SHOE BEAM 3' LOWER CLEANER BAR 3' LOWER CLEANER BAR 4' LOWER CLEANER BAR 4' LOWER CLEANER BAR 5' LOWER CLEANER BAR REAR LINK FRONT LINK FRONT LINK 4" CLEANER SHOE 6" CLEANER SHOE 8" CLEANER SHOE 10" CLEANER SHOE 12" CLEANER SHOE 14" CLEANER SHOE 16" CLEANER SHOE PIN JAM NUT (1-NC) BOLT (1-NC X 5") FLG LOCKNUT (1/2-NC) CLEANER SUPPORT WASHER (.531") EXTERNAL SNAP RING (0.500")

INCL REF NO'S 1,2,4,7,8,12,14,17,18; SEE F/N 2 INCL REF NO'S 1,2,4,7,8,12,14,17,18; SEE F/N 1

SEE FOOTNOTES 3 & 4 SEE FOOTNOTE 1 CLEANER SUPPORT

SEE FOOTNOTES 1 & 4 SEE FOOTNOTES 2 & 4 SEE FOOTNOTES 1 & 4 SEE FOOTNOTES 2 & 4 SEE FOOTNOTES 1 & 4 SEE FOOTNOTES 2 & 4 SEE FOOTNOTES 1 & 4 SEE FOOTNOTE 1 SEE FOOTNOTE 2

SEE FOOTNOTE 2 SEE FOOTNOTE 4 SEE FOOTNOTE 4

NOT SHOWN:

FOOTNOTES:

1. REFER TO INSTALLATION DIAGRAM 050-926. THESE PARTS ARE ASSOCIATED WITH STANDARD BOOMS, NOT ROLLER AND LARGE TAIL SPROCKET BOOMS. 2. REFER TO INSTALLATION DIAGRAM 050-926. THESE PARTS ARE ASSOCIATED WITH ROLLER AND LARGE TAIL SPROCKET BOOMS. 3. INSTALL SPRING 115-1018 SO THAT OPEN ENDS OF THE COILS ARE FACING TOWARDS THE CLEANER BAR & SHOE BEAM. 4. IF REPLACING SPRING 117-008 OR 115-602 WITH SPRING 115-1018 ALSO REPLACE CLEANER BAR AND SHOE BEAM, AND USE TRENCH CLEANER SPRING KIT 190-2669.

NOTE:

04

ID0109831

210

H331/A323 WEIGHT KIT

2 4

1 5

02

3

6

ID0380733

211

H331/A323 WEIGHT KIT REF PART NO. NUMBER

1 2 3 4 5 6

190-2520 302-0153 375-080 105-384 105-953 105-303 107-041

QTY

DESCRIPTION

WEIGHT KIT, H331/A323 1 LEFT REAR WEIGHT RACK 3 COUNTERWEIGHT 2 WASHER (3/4") 1 LOCKNUT (3/4-NC) 4 FLG BOLT (5/8-NC X 2-1/2") 1 BOLT (3/4-NC X 8", GD8)

REMARKS

INCLUDES REF NO.'S 1-6; SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. WEIGHT KIT 190-2520 REQUIRED ON RT45 WHEN EQUIPPED WITH AN A323 AND H331.

NOTE:

02

ID0380733

212

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 1

2

1

3

4 5 6 REPAIR PART# 131-115 138-228 1 131-135 0 138-218 0 135-1236 19 135-1233 16 135-964 10 135-912 3 135-950 5 105-043 28 105-066 10 105-002 12 105-076 20 105-065 70 105-111 0 135-913 0 135-914 0

02

131-116 1 0 0 19 18 4 3 2 26 8 12 8 72 20 5 0

131-117 1 0 0 18 18 16 2 2 16 20 8 8 72 8 2 3

CHAIN ASSEMBLIES 131-137 131-138 0 0 1 1 0 0 16 16 16 16 0 0 0 0 0 0 64 64 0 0 0 0 0 0 64 64 0 0 0 0 0 0

133-322 0 0 1 17 17 0 0 0 68 0 0 0 68 0 0 0

7

133-293 0 0 1 17 17 0 0 0 68 0 0 0 68 0 0 0

ID0446692

213

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 1 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7

1 1 1 1 1 1 1

131-115 131-116 131-117 131-137 131-138 133-322 133-293

DESCRIPTION

REMARKS

50K 2P DURA 54P 10.1" 50K 2P DURA 54P 12.1" 50K 2P DURA 54P 16" 50K 2P DURA 64P 5.1" 50K 2P DURA 64P 6.1" 50K 2P DURA 68P 5.1" 50K 2P DURA 68P 6.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-228 50K DIGGING CHAIN STD 2P (54P) 131-135 50K DIGGING CHAIN STD 2P (64P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 135-964 TOOTH SPACER (1/4") 135-912 TOOTH ADAPTER (8") 135-950 TOOTH ADAPTER (10") 105-043 BOLT (1/2-NC X 1-1/4") 105-066 BOLT (1/2-NC X 1-3/4") 105-002 BOLT (1/2-NC X 2 1/4") 105-076 BOLT (1/2-NC X 3") 105-065 LOCKNUT (1/2-NC) 105-111 BOLT (1/2-NC X 4") 135-913 TOOTH ADAPTER (12") 135-914 TOOTH ADAPTER (16") 105-275 BOLT (1/2-NC X 6")

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0446692

214

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 2

1

4

6

5

01

REPAIR Part# 131-009 138-217 0 138-215 0 138-218 1 135-1236 21 135-1233 21 135-964 0 135-912 8 135-950 0 105-043 52 105-066 0 105-002 32 105-076 0 105-065 84 105-111 0 135-913 0

3

2

131-010 0 0 1 21 21 0 4 4 52 0 16 16 84 0 0

131-011 0 0 1 21 22 12 3 3 38 12 12 12 86 12 3

CHAIN ASSEMBLIES 133-324 133-290 131-008 0 0 0 1 1 1 0 0 0 18 18 22 18 18 24 0 0 12 0 0 3 0 0 4 72 72 40 0 0 12 0 0 12 0 0 16 72 72 94 0 0 12 0 0 3

7

133-358 1 0 1 20 20 0 0 0 80 0 0 0 80 0 0

8

133-359 1 0 1 20 20 0 0 0 80 0 0 0 80 0 0

ID0446728

215

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 2 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

131-009 131-010 131-011 133-324 133-290 131-008 133-358 133-359

DESCRIPTION

REMARKS

50K 2P DURA 68P 8.6" 50K 2P DURA 68P 10.25" 50K 2P DURA 68P 12.1" 50K 2P DURA 72P 5.1" 50K 2P DURA 72P 6.1" 50K 2P DURA 72P 12.1" 50K 2P DURA 80P 5.1" 50K 2P DURA 80P 6.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-217 50K DIGGING CHAIN STD 2P (12P) 138-215 50K DIGGING CHAIN STD 2P (72P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 135-964 TOOTH SPACER (1/4") 135-912 TOOTH ADAPTER (8") 135-950 TOOTH ADAPTER (10") 105-043 BOLT (1/2-NC X 1-1/4") 105-066 BOLT (1/2-NC X 1-3/4") 105-002 BOLT (1/2-NC X 2 1/4") 105-076 BOLT (1/2-NC X 3") 105-065 LOCKNUT (1/2-NC) 105-111 BOLT (1/2-NC X 4") 135-913 TOOTH ADAPTER (12")

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446728

216

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3

3 2

1

4

8

7 5

REPAIR Part# 131-012 138-217 1 135-1532 0 138-218 1 135-1236 25 135-1233 25 135-964 0 135-912 10 135-950 0 105-043 60 105-066 0 105-002 40 105-076 0 105-065 100 105-111 0 135-913 0

01

131-013 1 0 1 25 25 0 5 5 60 0 20 20 100 0 0

131-014 1 0 1 26 25 16 3 4 42 16 12 16 100 16 4

6

CHAIN ASSEMBLIES 133-356 133-325 131-015 0 0 0 1 1 1 0 0 0 21 21 26 21 21 26 0 0 0 0 0 10 0 0 0 84 84 64 0 0 0 0 0 40 0 0 0 84 84 104 0 0 0 0 0 0

131-016 0 1 0 26 26 0 5 5 64 0 20 20 104 0 0

131-017 0 1 0 27 26 16 3 4 46 16 12 16 106 16 4

ID0446855

217

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

131-012 131-013 131-014 133-356 133-325 131-015 131-016 131-017

DESCRIPTION

REMARKS

50K 2P DURA 80P 8.75" 50K 2P DURA 80P 10.1" 50K 2P DURA 80P 12.1" 50K 2P DURA 84P 5.1" 50K 2P DURA 84P 6.1" 50K 2P DURA 84P 8.75" 50K 2P DURA 84P 10" 50K 2P DURA 84P 12"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-217 50K DIGGING CHAIN STD 2P (12P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 135-964 TOOTH SPACER (1/4") 135-912 TOOTH ADAPTER (8") 135-950 TOOTH ADAPTER (10") 105-043 BOLT (1/2-NC X 1-1/4") 105-066 BOLT (1/2-NC X 1-3/4") 105-002 BOLT (1/2-NC X 2 1/4") 105-076 BOLT (1/2-NC X 3") 105-065 LOCKNUT (1/2-NC) 105-111 BOLT (1/2-NC X 4") 135-913 TOOTH ADAPTER (12")

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446855

218

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4

4

3 2 1

7 6 5

REPAIR Part# 133-330 138-219 1 138-215 1 138-216 0 135-1533 0 135-1532 0 138-218 0 135-1236 22 135-1233 22 105-043 88 105-065 88

01

133-294 1 1 0 0 0 0 22 22 88 88

133-360 0 0 1 0 0 1 23 23 92 92

CHAIN ASSEMBLIES 133-361 133-331 133-291 0 0 0 0 0 0 1 0 0 0 1 1 0 0 0 1 0 0 23 24 24 23 24 24 92 96 96 92 96 96

133-332 1 0 0 0 1 0 25 25 100 100

ID0446920

219

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7

1 1 1 1 1 1 1

133-330 133-294 133-360 133-361 133-331 133-291 133-332

DESCRIPTION

REMARKS

50K 2P DURA 88P 5.1" 50K 2P DURA 88P 6.1" 50K 2P DURA 92P 5.1" 50K 2P DURA 92P 6.1" 50K 2P DURA 96P 5.1" 50K 2P DURA 96P 6.1" 50K 2P DURA 100P 5.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-219 50K DIGGING CHAIN STD 2P (16P) 138-215 50K DIGGING CHAIN STD 2P (72P) 138-216 50K DIGGING CHAIN STD 2P (24P) 135-1533 50K DIGGING CHAIN STD 2P (96P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 105-043 BOLT (1/2-NC X 1-1/4") 105-065 LOCKNUT (1/2-NC)

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446920

220

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 5

4 3 1

2

8 7

5

REPAIR Part# 133-224 138-219 1 138-217 0 138-216 0 135-1533 0 135-1532 1 138-218 0 135-1236 25 135-1233 25 105-043 100 105-065 100

01

133-333 0 1 0 1 0 0 27 27 108 108

133-292 0 1 0 1 0 0 27 27 108 108

6

CHAIN ASSEMBLIES 133-295 133-264 133-336 1 0 0 0 0 0 0 2 1 1 0 1 0 0 0 0 1 0 28 29 30 28 29 30 112 116 120 112 116 120

133-268 0 0 1 1 0 0 30 30 120 120

ID0446942

221

50K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 5 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

133-224 133-333 133-292 133-291 133-295 133-364 133-336 133-268

DESCRIPTION

REMARKS

50K 2P DURA 100P 6.1" 50K 2P DURA 108P 5.1" 50K 2P DURA 108P 6.1" 50K 2P DURA 96P 6.1" 50K 2P DURA 112P 6.1" 50K 2P DURA 116P 5.1" 50K 2P DURA 120P 5.1" 50K 2P DURA 120P 6.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-219 50K DIGGING CHAIN STD 2P (16P) 138-217 50K DIGGING CHAIN STD 2P (12P) 138-216 50K DIGGING CHAIN STD 2P (24P) 135-1533 50K DIGGING CHAIN STD 2P (96P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 138-218 50K DIGGING CHAIN STD 2P (68P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 105-043 BOLT (1/2-NC X 1-1/4") 105-065 LOCKNUT (1/2-NC)

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0446942

222

50K DURATOOTH/C2X ASB CHAINS 2P CHAIN ASSEMBLIES

1

2

REPAIR Part# 133-282 138-278 2 138-279 1 138-280 1 138-281 0 135-1236 17 135-1233 17 135-1237 0 135-1234 0 105-043 68 105-065 68

01

3

4 5

CHAIN ASSEMBLIES 133-299 135-1311 135-1308 135-1301 1 1 1 2 0 0 0 1 1 1 1 1 1 1 1 0 28 0 0 0 28 0 0 0 0 28 28 17 0 28 28 17 112 112 112 68 112 112 112 68

ID0447026

223

50K DURATOOTH/C2X ASB CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5

1 1 1 1 1

135-1301 133-282 133-299 135-1311 135-1308

DESCRIPTION

REMARKS

50K C2X ASB 68P 5.12" 50K DURA ASB 68P 5.1" 50K DURA ASB 112P 6.1" 50K ASB C2X 112P 5.1" 50K ASB C2X 112P 6.1"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-278 50K DIGGING CHAIN ASB 2P (16P) 138-279 50K DIGGING CHAIN ASB 2P (12P) 138-280 50K DIGGING CHAIN ASB 2P (24P) 138-281 50K DIGGING CHAIN ASB 2P (72P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 135-1237 DURATOOTH C2X, RIGHT 1/4" 50K 135-1234 DURATOOTH C2X, LEFT 1/4" 50K 105-043 BOLT (1/2-NC X 1-1/4") 105-065 LOCKNUT (1/2-NC)

FOOTNOTES:

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0447026

224

50K COMBO CHAINS 2P DIGGING CHAINS

1

3

2

4

5

6 REPAIR Part# 131-140 131-135 1 138-218 0 138-217 0 135-1532 0 135-1533 0 138-223 0 138-228 0 135-1236 8 135-1233 8 136-236 5 136-237 5 136-240 3 136-241 3 136-036 0 136-037 0 136-040 0

01

136-041 135-912 135-950 135-913 136-237 135-952 136-043 105-076 105-111 105-136 105-002 105-110 105-065

0 0 0 0 0 48 16 16 16 32 0 0 64

131-415 0 1 0 0 0 0 0 8 8 5 5 4 4 0 0 0

131-412 0 1 1 0 0 0 0 10 10 6 6 4 4 0 0 0

0 0 0 0 0 52 16 16 20 32 0 0 68

0 0 0 0 0 60 20 20 20 40 0 0 80

CHAIN ASSEMBLIES 131-413 131-416 135-1483 131-404 0 0 0 0 0 0 0 1 0 0 0 1 1 0 0 0 0 1 0 0 0 0 1 0 0 0 1 0 11 12 9 10 11 12 9 10 5 7 0 0 5 7 0 0 5 5 9 0 5 5 9 0 0 0 0 6 0 0 0 6 0 0 0 4 0 0 0 0 0 64 20 20 20 44 0 0 84

0 0 0 0 0 72 24 24 24 48 0 0 96

0 3 3 3 3 24 18 18 0 36 12 12 78

4 0 0 0 0 60 20 20 20 40 0 0 80

8

7 131-405 0 0 0 1 0 0 0 11 11 0 0 0 0 5 5 5

131-408 0 0 0 0 1 0 0 12 12 0 0 0 0 7 7 5

5 0 0 0 0 64 20 20 20 44 0 0 84

5 0 0 0 0 72 24 24 24 48 0 0 96

9

ID0447522

225

50K COMBO CHAINS 2P DIGGING CHAINS REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9

1 1 1 1 1 1 1 1 1

131-416 135-1483 131-404 131-405 131-408 131-140 131-415 131-412 131-413

DESCRIPTION

50K 2P DURA/SHK B 96P 6.0 50K 2P CMB DURA/SHK B 60P 12" 50K 2P CMB DURA/ALG 80P 6.0 50K 2P CMB DURA/ALG 84P 6.0 50K 2P CMB DURA/ALG 96P 6.0 50K 2P CMB DURA/SHK B 64P 6.0" 50K 2P CMB DURA/SHK B 68P 6.0" 50K 2P CMB DURA/SHK B 80P 6.0" 50K 2P DURA/SHK B 84P 6.0"

REMARKS

SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

131-135 50K DIGGING CHAIN STD 2P (64P) 138-218 50K DIGGING CHAIN STD 2P (68P) 138-217 50K DIGGING CHAIN STD 2P (12P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 135-1533 50K DIGGING CHAIN STD 2P (96P) 138-223 50K DIGGING CHAIN STD 2P (4P) 138-228 50K DIGGING CHAIN STD 2P (54P) 135-1236 DURATOOTH, RIGHT 1/4" 50K 135-1233 DURATOOTH, LEFT 1/4" 50K 136-236 50K LEFT INSIDE BOLT-ON SHARK ADAPTER 136-237 50K RIGHT INSIDE BOLT-ON SHARK ADAPTER 136-240 50K LEFT OUTSIDE WIDE BOLT-ON SHARK ADAP 136-241 50K RIGHT OUTSIDE WIDE BOLT-ON SHARK ADAP 136-036 50K CAST BIT ADAPTER, R.O. 136-037 50K CAST BIT ADAPTER, L.O. 136-040 50K CAST BIT ADPTR #10POS R.O. 136-041 50K CAST BIT ADPTR #10POS L.O. 135-912 TOOTH ADAPTER (8") 135-950 TOOTH ADAPTER (10") 135-913 TOOTH ADAPTER (12") 136-237 50K RIGHT INSIDE BOLT-ON SHARK ADAPTER 135-952 CHAIN SPACER (1.750") 136-043 SPACER 105-076 BOLT (1/2-NC X 3") 105-111 BOLT (1/2-NC X 4") 105-136 BOLT (1/2-NC X 3-1/2", GD8) 105-002 BOLT (1/2-NC X 2 1/4") 105-110 BOLT (1/2-NC X 4.5") 105-065 LOCKNUT (1/2-NC) FOOTNOTES:

USES 136-112 INSERT BITS

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0447522

226

50K ALLIGATOR & SHARK CHAINS 2P CHAIN ASSEMBLIES

1

2

5

4

3

6

01

REPAIR Part# 135-336 138-218 1 138-215 0 138-217 0 135-1532 0 135-1533 0 136-036 10 136-037 16 136-038 4 136-039 4 136-040 4 136-041 4 136-236 0 136-237 0 136-238 0 136-239 0 136-240 0 136-241 0 135-952 44 136-043 24 105-076 24 105-110 16 105-111 28 105-065 68

135-335 0 1 0 0 0 14 14 4 4 4 4 0 0 0 0 0 0 48 24 24 16 32 72

138-230 1 0 1 0 0 16 16 4 4 4 4 0 0 0 0 0 0 48 32 32 16 32 80

8

7

CHAIN ASSEMBLIES 135-337 138-225 132-302 0 0 1 0 0 0 0 0 0 1 0 0 0 1 0 17 19 0 17 19 0 4 5 0 4 5 0 4 5 0 4 5 0 0 0 13 0 0 13 0 0 4 0 0 4 0 0 4 0 0 4 52 60 44 32 36 24 32 36 24 16 20 16 36 40 28 84 96 68

132-301 0 1 0 0 0 0 0 0 0 0 0 14 14 4 4 4 4 48 24 24 16 32 72

132-303 0 0 0 1 0 0 0 0 0 0 0 17 17 4 4 4 4 52 32 32 16 36 84

ID0447762

227

50K ALLIGATOR & SHARK CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-336 135-335 138-230 135-337 138-225 132-302 132-301 132-303

DESCRIPTION

50K 2P ALG B-O 68P 5.250 50K 2P ALG 72P 5.2 "NS" 50K 2P ALG 80P 5.25" 50K 2P ALG 84P 5.3" 50K 2P ALG 96P 5.3 50K 2P SHK B-O 68P 5.3 50K 2P B-O SHK 72P 5.5" 50K 2P SHK B-O 84P 5.3"

REMARKS

SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-218 50K DIGGING CHAIN STD 2P (68P) 138-215 50K DIGGING CHAIN STD 2P (72P) 138-217 50K DIGGING CHAIN STD 2P (12P) 135-1532 50K DIGGING CHAIN STD 2P (84P) 135-1533 50K DIGGING CHAIN STD 2P (96P) 136-036 50K CAST BIT ADAPTER, R.O. 136-037 50K CAST BIT ADAPTER, L.O. 136-038 50K CAST BIT ADPTR #9 POS L.O. 136-039 50K CAST BIT ADPTR #9 POS R.O. 136-040 50K CAST BIT ADPTR #10POS R.O. 136-041 50K CAST BIT ADPTR #10POS L.O. 136-236 50K LEFT INSIDE BOLT-ON SHARK ADAPTER 136-237 50K RIGHT INSIDE BOLT-ON SHARK ADAPTER 136-238 50K RT OUTSIDE BOLT-ON SHARK ADPTER 136-239 50K LT OUTSIDE BOLT-ON SHARK ADPTER 136-240 50K LEFT OUTSIDE WIDE BOLT-ON SHARK ADAP 136-241 50K RIGHT OUTSIDE WIDE BOLT-ON SHARK ADAP 135-952 CHAIN SPACER (1.750") 136-043 SPACER 105-076 BOLT (1/2-NC X 3") 105-110 BOLT (1/2-NC X 4.5") 105-111 BOLT (1/2-NC X 4") 105-065 LOCKNUT (1/2-NC)

FOOTNOTES:

USES 136-112 INSERT BITS

NOTE:

1. 50K STANDARD REPAIR STATION KIT 131-131, 50K PREMIUM REPAIR STATION KIT 135-1149, 50K MASTER PIN 135-1067, & 50K LOCK KEY 135-1086 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0447762

228

50K WELDED ALG/ SHARK II CHAINS 2P CHAIN ASSEMBLIES

3

2

1

4 5 6 7 8

01

ID0488231

229

50K WELDED ALG/ SHARK II CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

131-050 131-096 131-097 131-175 131-171 131-172 131-173 131-174

DESCRIPTION

REMARKS

50K 2P ALG W/O 80P 6.0 50K 2P ALG W/O 84P 6.0 50K 2P ALG W/O 96P 6.0 50K 2P SHK II W-O 54P 6.0 50K 2P SHK II W-O 68P 6.0 50K 2P SHK II W-O 80P 6.0 50K 2P SHK II W-O 84P 6.0 50K 2P SHK II W-O 96P 6.0

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0488231

230

WHEEL GUARD

3

22

5

2 15 21 16 15

8

19

9 17 1 21 10 6 1

7

11

12 4

7

20 13 14

18

07

ID0124152

231

WHEEL GUARD REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

QTY

DESCRIPTION

105-003 20 FLG LOCKNUT (5/16-NC) 105-048 1 BOLT (1/2-NC X 1-1/2") 105-065 1 LOCKNUT (1/2-NC) 105-085 4 LOCKNUT (1/4-NC) 105-089 1 LOCKNUT (5/16-NC) 105-818 4 BOLT (1/4-NC X 1-1/2") 105-823 20 FLG LK BOLT (5/16-NC X 1") 105-891 1 BOLT (5/16-NC X 1-1/2", SLT HD) 110-032 2 SNAPPER PIN (5/16" X 2-1/2") 300-2795 2 HINGE (3 X 17.62") 110-043 4 HINGE (6") 110-222 4 HOOD LATCH 110-223 4 LATCH BRACKET 110-224 4 ANCHOR BRACKET 110-253 8 POP RIVET (3/16" X 1/2") 301-3732 2 KNOB (5/16") 115-349 1 GROMMET (1/2" ID) 115-503 4 EXTERNAL CLIP RING 183-425 2 HANDLE PIN 183-461 2 PIN 317-347 1 LEFT COVER 317-348 1 RIGHT COVER 317-350 1 WHEEL GUARD 323-699 1 WHEEL GUARD ASSEMBLY 317-370 1 HANDLE

REMARKS

REFER TO FOOTNOTE # 1 SUPERCEDED

SUPERCEDES 110-298

NOT SHOWN:

FOOTNOTES:

1. FRAME MAY REQUIRE CLEARANCING ON A341/H341

NOTE:

07

ID0124152

232

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS

HAMMER 3 5

4

SLIDE HAMMER 3 1

2

H

801-056

233

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS REF PART NO. NUMBER

1.

2.

3.

4.

5.

259-002 259-001 259-036 105-403 105-357 183-072 259-003

QTY

1 1 2 1 1

DESCRIPTION

REMARKS

BIT PULLER - SLIDE HAMMER BIT PULLER - HAMMER BIT PULLER JAM NUT (5/8-NC) LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER

INCL REF NO.'S 1 - 5 EARLY STYLE

FOOTNOTES

NOTE:

H

801-056

234

SPECIAL TOOLS - ALIG BIT PUNCH

5

3

4

1 9 2 8

6

H

7

801-057

235

SPECIAL TOOLS - ALIG BIT PUNCH REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

259-150 105-708 105-964 105-994 183-072 259-003 259-151 259-152 259-153 105-357

QTY

DESCRIPTION

REMARKS

INCL REF NO.'S 1 THRU 8

2 1 1 1 1 1 1 1 1

BIT PUNCH - SLIDE HAMMER SET SCREW (3/8-NC X 3/8", NLK) WASHER (.656") FLG LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER HEAVY BIT PUNCH-SLIDE HAMMER LIGHT BIT PUNCH-SLIDE HAMMER PUNCH ADAPTER-SLIDE HAMMER LOCKNUT (5/8-NC)

FOOTNOTES

NOTE:

H

801-057

236

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

237

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

238

PULL BLADES

1

3

4

5 2

8

6 7

5

9 10

11

08

ID0125102

239

PULL BLADES REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

QTY

186-191 186-424

1 1

186-336

1

186-810

1

186-811

1

125-734 105-871 186-248 186-247 181-598 125-736 185-901 185-902 185-903 185-904 105-065 105-156 105-075 105-162 105-179 105-047

4 2 2 AR 1 2 1 1 1 1 2 1 1 1 1 1

DESCRIPTION

PULL/FLOAT BLADE (5/8" X 12") BULLET BLADE (12" LG X 3/8" THK) 1-1/2" OD BULLET BULLET BLADE (12" LG X 3/8" THK) 3" OD BULLET SPEED BULLET BLADE (12" LG X 3/8 " THK) 2" OD BULLET BULLET BLADE (18" LG X 3/8" THK) 2" OD BULLET TENSION BUSHING (1.375") BOLT (1/2-NC X 2" GD8) LINK PULL BLADE LINK CONVERSION KIT BUSHING SPRING BUSHING (1.000") PULLING GRIP (3/8" TO 1/2") PULLING GRIP (1/2" TO 3/4") PULLING GRIP (3/4" TO 1 1/4") PULLING GRIP (1 1/4" TO 2") LOCKNUT (1/2-NC) BOLT (3/8-NC X 1 1/2") BOLT (3/8-NC X 2") BOLT (3/8-NC X 2 1/4") BOLT (3/8-NC X 3-1/2") LOCKNUT (3/8-NC)

REMARKS

INCL REF NO. 7, SEE FOOTNOTE 4 SEE FOOTNOTES 2 & 4 SEE FOOTNOTES 2 & 4 SEE FOOTNOTES 2 & 4 SEE FOOTNOTES 2 & 4 SEE FOOTNOTE 1

INCL REF NO.'S 4,5,6 & 9

USE ON PULL BLADES WITH 1.5" OD BULLET W/WELDED TABS, (OLD STYLE) USE ON PULL BLADES WITH 1.5" OD BULLETS W/MACHINED TABS, (NEW STYLE) USE ON PULL BLADES WITH 3" OD BULLETS W/WELDED TABS, (OLD STYLE) USE ON PULL BLADES WITH 3" OD BULLETS W/MACHINED TABS, (NEW STYLE)

FOOTNOTES:

1. PULL BLADES WITH 1-3/4" ID MOUNTING BOSSES, USED BUSHING (REF NO. 3) AND ARE NO LONGER AVAILABLE. THIS BUSHING IS NOT USED ON REPLACEMENT BLADES HAVING BOSSES WITH 1-3/8" ID. 2. THESE PULL BLADES HAVE BOSSES WITH 1-3/8" ID AND DO NOT REQUIRE THE USE OF BUSHINGS. 3. SPEED BLADES ARE INTENDED FOR STRAIGHT OR GENTLY CURVING PLOW RUNS. THEY SHOULD NOT BE USED IN RUNS REQUIRING SHARP CURVES. 4. USE OF THESE BLADES ON THE H532, H552 OR M552 REQUIRES (2) 1-3/8" DIAMETER PINS (183-626) AND THE REPLACEMENT OF THE EXISTING STEEL SPRING BUSHINGS IN THE VIBRATOR BLADE MOUNT WITH (4) 1-3/8" ID STEEL SPRING BUSHINGS (125-789).

5. LENGTH REFERS TO COVER DEPTH.

08

ID0125102

240

FEED BLADES

2

1 10 3

5

4

6 7

11

8

9

08

ID0055434

241

FEED BLADES REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

106-021 106-022 106-024 106-023 186-450 186-773 186-502 186-780 186-594 186-457 186-509 186-523 186-465 186-473 186-516 186-819 186-835 186-530 186-804 186-805 186-591 186-455 186-507 186-521 186-463 186-514 186-885 186-886 185-202 185-234 185-206 185-233 185-237 110-368 110-833 186-528

QTY

DESCRIPTION

REMARKS

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

WING BOLT (3/8-NC X 1-1/4") WING BOLT (3/8-NC X 1-3/4") WING BOLT (3/8-NC X 2-1/2") WING BOLT (3/8-NC X 2") CABLE GUIDE (3/8" X 1-1/2" X 12") CABLE GUIDE (1/2" X 1-1/2" X 12") CABLE GUIDE (3/8" X 1-1/2" X 18") CABLE GUIDE (1/2" X 1-1/2" X 18") CABLE GUIDE (.75" X 3" X 6") CABLE GUIDE (.75" X 3" X 12") CABLE GUIDE (.75" X 3" 18") CABLE GUIDE (.75" X 3" X 24") CABLE GUIDE (.75" X 7.5" X 12") CABLE GUIDE (1" X 10" X 12") CABLE GUIDE (.75" X 7.5" X 18") CABLE GUIDE (1" X 7.5" X 24") CABLE GUIDE (1.5" X 6.75" X 24") CABLE GUIDE (1" X 10" X 18") SPEED FEED BLADE (.5" X 1.5" X 12") FEED FEED BLADE (.5" X 1.5" X 18") FEED BLADE (.75" X 3" X 6") FEED BLADE (.75" X 3" X 12") FEED BLADE (.75" X 3" X 18") FEED BLADE (.75" X 3" X 24") FEED BLADE (.75" X 7.5" X 12") FEED BLADE (.75" X 7.5" X 18") FEED BLADE (1" X 7.5" X 24") FEED BLADE (1.5" X 6.7" X 24") FEED BLADE (.75" X .31" X 9.5") FEED BLADE (.75" X .31" X 16") CABLE GUIDE (.75" X .31" X 9.5") CABLE GUIDE (.75" X .31" X 16") CABLE GUIDE (.75" X .75" X 18") SNAPPER PIN (3/8" X 1-1/2") SNAPPER PIN (3/8" X 2-3/4") FEED BLADE (1" X 10" X 18")

FOR 3/8" IM BLADE SEE FOOTNOTE 6 FOR 1/2" IM BLADE SEE FOOTNOTE 6 FOR 3/4" IM BLADE SEE FOOTNOTE 6 FOR 1" IM BLADE SEE FOOTNOTE 6 USE WITH 186-448 FEED BLADE USE WITH 186-765 & 186-804 FEED BLADE USE WITH 186-500 FEED BLADE USE WITH 186-774 & 186-805 FEED BLADE USE WITH 186-591 FEED BLADE USE WITH 186-455 FEED BLADE USE WITH 186-507 FEED BLADE USE WITH 186-521 & 186-880 FEED BLADE USE WITH 186-463 FEED BLADE USE WITH 186-471 FEED BLADE USE WITH 186-514 FEED BLADE USE WITH 186-528 FEED BLADE USE WITH 186-885 FEED BLADE USE WITH 186-886 FEED BLADE INCL REF NOS 1 & 2 SEE FOOTNOTE 1 & 2 INCL REF NOS 1 & 2 SEE FOOTNOTE 1 & 2 INCL REF NOS 1 & 3 SEE FOOTNOTE 1 INCL REF NOS 1 & 3 SEE FOOTNOTE 1 INCL REF NOS 1 & 3 SEE FOOTNOTE 1 INCL REF NOS 1 & 3 SEE FOOTNOTE 1 INCL REF NOS 1 & 4 SEE FOOTNOTE 1 INCL REF NOS 1 & 4 SEE FOOTNOTE 1 INCL REF NOS 1 & 4 SEE FOOTNOTE 1 INCL REF NOS 1 & 4 SEE FOOTNOTE 1 INCL REF NOS 1 & 9 SEE FOOTNOTE 3 INCL REF NOS 1 & 9 SEE FOOTNOTE 3

SEE FOOTNOTE 4 SEE FOOTNOTE 5 SEE FOOTNOTE 5 INCL REF NOS 1 & 4

SEE FOOTNOTE 1

FOOTNOTES

1. USE OF THESE BLADES ON THE H532, H552 OR M552 REQUIRES (2) 1-3/8" DIAMETER PINS (183-626) AND THE REPLACEMENT OF THE EXISTING STEEL SPRING BUSHINGS IN THE VIBRATOR BLADE MOUNT WITH (4) 1-3/8" ID STEEL SPRING BUSHINGS (125-789).

2. SPEED BLADES ARE INTENDED FOR STRAIGHT OR GENTLY CURVING PLOW RUNS. THEY SHOULD NOT BE USED IN RUNS REQUIRING SHARP TURNS. 3. THESE BLADES HAVE A VERY SMALL RADIUS (.31") AND A DEEPER CHUTE OPENING FOR MULTIPLE CABLES. 4. THIS GUIDE ONLY WORKS WITH FEED BLADE 185-234. IT LOWERS THE EXIT POINT TWO INCHES. 5. USE WITH BLADES NOT HAVING WELD-ON WING BOLT NUTS. 6. USE WITH BLADES USING WELD-ON WING BOLT NUTS. NOTE:

LENGTH (L) REFERS TO COVER DEPTHS. FEED BLADES (WHICH HAVE FIXED FEED TUBES) HAVE MEASUREMENTS OF THE SPACE BETWEEN FEED TUBES SIDES REFERRED TO AS INSIDE MEASUREMENT (IM). CABLE GUIDE THICKNESS (THK) MEASUREMENTS REFER TO A MEASUREMENT FROM EDGE TO EDGE AND CORRESPOND TO THE INSIDE MEASUREMENTS (IM) OF THE FEED BLADES THEY ARE USED WITH.

08

ID0055434

242

DBL. DISK BLADE (.50 X 2.0 X 6.0) 16 SEE F/N 4 PREVIOUS UNITS

2 SEE F/N 1

14 SEE F/N 2

1

CURRENT UNITS

15

12

9

SEE F/N 3

6 13

3

10 5

11

4

09

7

8

ID0180024

243

DBL. DISK BLADE (.50 X 2.0 X 6.0) REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

185-1073 185-1065 185-1066 205-1073 105-1177 125-1010 105-071 105-585 185-1069 105-065 150-1886 105-372 110-1003 110-095 110-033 110-827

QTY

2 1 2 1 2 2 1 1 1 2 2 2 4 1 1

DESCRIPTION

DBL. DISK BLADE (.50 X 2.0 X 6.0) DISK ASSY. W/ CAP & BEARING BLADE ASSY. (DISK PLOW) TIRE & WHEEL ASSY. (8.25 X 2.75) BOLT (1/2-UNC X 8.0" GR. 8) WHEEL BUSHING (.749 X .529 X 3.34" LG.) WASHER (1/2") ROLL PIN (.750" X 1.250") GUIDE COVER (DISK PLOW) LOCKNUT (1/2-NC) DUST COVER LOCKNUT (3/4-NC) MACH. BUSHING (3/4" X 14 GA. NARROW RIM) MACHINERY BUSHING (3/4", 18GA) HAIR CLIP PIN (1/8" X 1/2") PIN

REMARKS

INCLUDES REF NO.'S 1-14

USE LOCTITE 680 (GREEN).

USE LOCTITE 262, 277 (RED).

USE LOCTITE 262, 277 (RED).

SEE FOOTNOTE 4 SEE FOOTNOTE 4

NOT SHOWN:

FOOTNOTES:

1. ADJUST / CHANGE MACHINERY BUSHINGS (REF NO.'S 13 & 14) SO THAT THE DISK ASSEMBLIES (REF NO. 1) SLIGHTLY CLEAR OR ONLY HAVE LIGHT CONTACT WITH THE BLADE ASSEMBLY (REF NO. 2) IN THIS AREA. 2. CUTTING EDGES OF DISK ASSEMBLIES (REF NO. 1) ARE DESIGNED TO LIGHTLY TOUCH IN THIS AREA. 3. DISK ASSEMBLIES (REF NO. 1) MUST ROTATE FREELY AFTER NUTS (REF NO. 12) ARE TIGHTENED. 4. PREVIOUS UNITS USE ITEM #16, 185-1070.

NOTE:

09

ID0180024

244

PIPE PULLER .625" - 1.250"

1

2

3

02

ID0139361

245

PIPE PULLER .625" - 1.250" REF PART NO. NUMBER

QTY

1.

2.

3.

1 1 1

368-290 107-113 107-114

DESCRIPTION

PIPE PULLER (.625" TO 1.250") NUT (#12-24) EYE BOLT (#12-24 X 1-1/2")

REMARKS

INCLUDES REFERENCE NUMBERS 2 AND 3 INCLUDES REFERENCE NUMBER 2

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0139361

246

NOTES:

ID0134963

247

MISCELLANEOUS

ID0135063

248

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

249

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

250

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

251

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

252

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which are D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

253

254

H300 Series Related Publications Component

Ass’y

P/N

Model: H300 Series ....... Parts Manual ......................................................... ............ 053-417 H300 Series ....... Operators Manual .................................................. ............ 054-460 H300 Series ....... Repair Guide (Service Manual) .............................. ................ N/A H300 Series ....... Supplementary Maint Guide - Trencher ................. ............ 050-633 H300 Series ....... Digging Chain Guide (6 Volumes) ......................... ............ 050-700 H300 Series ....... Special Tools Guide .............................................. ............ 052-901

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) .............................. 190-051 O-ring Repair Kit - Field Service (46 different O-rings) ..................................... 190-052

VER.01

ID0189862

255

Parts Manual Change Request (Please print clearly)

Date: _______________________

Dealer No. (required): _____________________________

Your Name: _____________________________ Phone: _________________

Position: _____________________________

Fax: _________________

E-mail: __________________

Publication Information: Parts Manual No.: _____-_____

Model: __________

Illustration Part No.: Manual Page No.: 1. _____-_____ .......................................................... 1. __________ 2. _____-_____ .......................................................... 2. __________ 3. _____-_____ .......................................................... 3. __________ Nature of Change Request:

 Text

 Graphics

 Missing Information

Describe change requested (if possible, include copy of publication page with changes marked.): ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ Please fax completed form to Parts Manual Department (580) 572-3525 Thank you for taking the time to submit this request. We will contact you if further information is needed to process your request.

ID0135001

256

257

ID0040564

258

ID0135281