Ditch Witch H1052 Combo Attachment Parts Manual 053-2352 PDF

H1052 Parts Manual

Issue 11

053-2352

1

H1052 ISSUE NO. 11PL-05/23 For Replacement Copy Order P/N 053-2352

This manual contains information concerning the following models: H1052 combo attachment

Copyright 2010, 2011, 2014, 2015, 2018, 2021, 2023 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Jet Trac, Roto Witch, Subsite, Fluid Miser, Power Pipe, Super Witch, Pierce Arrow, Zahn, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

2

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

WARRANTY ______________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy July 2019

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse (including, but not limited to, rollover), abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 07

ID0134872

3

4

5

CONTENTS_________________________ Decals Decals – H1052 ........................................... 8

Frame Components Attachment Frame – Combo ...................... 12 Attachment Sensor Mount ........................ 24 Digging Chain Guard................................ 30 Drive Hose Clamp .................................... 22 Headshaft ................................................ 28 Lower Plow Arm/Swing Post .................... 14 Pivot ......................................................... 26 Stow Lock ................................................ 20 Upper Plow Arm ....................................... 16 Vibrator Steering ...................................... 18

Assembly Drawings Hydraulic Control Levers .......................... 46 Skid Shoes/Sod Cutter ............................. 44 Vibrator Housing .......................... 34, 36, 38 Vibrator Weights ................................ 40, 42

Roller – 19” OD .......................................... 86 Roller Boom – Non Wear Bar ....................... 84 Roller Boom – Wear Bar ............................. 80 Small Tail Sprocket Boom ........................ 90 Sprocket – 2”P & 3”P .................................. 92 Trench Cleaner Feed Tube .................... 114

Accessories Cable Guide ........................................... 122 Pipe Puller – .625” – 1.250” ........................ 124 Plow Blades ................................... 118, 120

Miscellaneous Torque Information ................................. 128 Optional Kits ........................................... 134 Related Publications............................... 134 Replacement O-Ring Chart .................... 133 Warranty Registration............................. 136

Hydraulics Blade Steer Hydraulics............................. 50 Control Valve – 3-Spool ............................. 66 Cylinder – 4.0” x 2.00” x 15.0” ....................... 60 Cylinders – 2.5” x 1.5” ................................. 62 Gearbox & Vibrator Drive Hydraulics ........ 58 Motor ....................................................... 64 Pivot Lift Hydraulics ................................. 56 Plow Lift Hydraulics .................................. 52 Plow Swing Hydraulics ............................. 54

Booms Alligator Chain Chain – 70K 2P .................. 98 Alligator Chain – 110K 2P......................... 110 Auger Parts .............................................. 70 Boom Tube .............................................. 72 Combo Chain – 110K 2P .......................... 104 Duratooth Chain – 70K 2P ......................... 96 Duratooth Chain – 110K 2P ...................... 100 Duratooth Chain – 110K 2P Group 2 ........... 102 Duratooth Chain – 110K 2P Group 3........... 106 Duratooth Chain – 110K 2P Group 4........... 108 Grease Cylinder Bracket – Non Wear Bar .... 78 Grease Cylinder Bracket – Wear Bar .......... 76 Grease Cylinders ..................................... 94 HD LTR Wear Bar Boom – 19” HD Roller .... 82 HD Roller – 19” ......................................... 88 Mechanical Trench Cleaner ................... 112 Personnel Restraint ................................. 74 ID0265315

6

7

DECALS

ID0135069

8

DECAL LOCATION H1052 4

3 2 1

5 6 7

8 14 9 16 13 8 11 7 12 6 7 15

10

8

11

8 14 16

02

ID0258633

9

DECAL LOCATION H1052 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

270-4909 273-093 273-091 273-171 273-172 274-002 274-037 274-442 274-318 275-232 275-230 275-231 275-233 275-123 270-4908 270-6308 275-284 275-184

QTY

DESCRIPTION

1 1 1 1 1 2 3 4 1 1 2 2 1 2 2 1 2

H1052 SERVICE DECAL KIT PLOW CONTROL DIGGING ATTACHMENT CONTROL COMBO SELECT CONTROL VALVE DANGER CHAIN & AUGER WARNING CRUSHING WEIGHT LIFT LOCATION TIE DOWN LOCATION DANGER 1.75" X 18" DANGER STRIPE 1.75" X 18" DANGER STRIPE 2.75" X 18” DANGER 2.75" X 18” DANGER CHAIN & AUGER H1052 MODEL ID H1052 MODEL ID AMPLITUDE CHART WARNING MOVING PARTS

REMARKS

(OLD STYLE) (NEW STYLE)

FOOTNOTES 1.

02

ID0258633

10

NOTES:

ID0134963

11

FRAME COMPONENTS

ID0135068

12

ATTACHMENT FRAME-COMBO/DRAWBAR H1052

5

6

4

7

7

7 10

6 3

2

9 8

7

14 11 3 21

1

10 9

13

8

12

21

20 19 18

15 16 17

02

16

ID0255243

13

ATTACHMENT FRAME-COMBO/DRAWBAR H1052

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

190-1616 301-1175 178-587 106-471 305-863 305-862 106-381 106-551 106-474 106-399 106-374 184-840 106-666 106-392 106-355 301-0348 106-098 105-340 301-0349 106-949 106-085 125-773

QTY

DESCRIPTION

- H1052 SHIPKIT 1 H1052 FRAME 1 PIN (1.750" X 6.700) 2 FLG SCREW (M16-2.00 X 30MM) 1 CYLINDER COVER 1 VALVE COVER 4 FLG LK SCREW (M8-1.25 X 25MM) 7 CLIP NUT (M8-1.25) 11 SCREW (M20-2.50 X 60MM) 19 WASHER (M20, HARDENED) 11 HEX NUT (M20-2.50, 10.9) ZP 2 SPACER 2 SCREW (M16-2.00 X 65MM, 10.9) 1 WASHER (M16) 2 FLG NUT (M16-2.00, 10.9) 1 LOAD TRANSFER PLATE 8 FLG BOLT (3/4-NC X 2", GD8) 4 FLG LOCKNUT (3/4-NC) 1 SPACER PLATE 4 WASHER (3/4", HARDENED) 4 BOLT (3/4-NC X 3-1/4", GD8) 4 COMPOSITION BUSHING (1.75")

REMARKS

INCL'S REF NO.'S 2 THRU 20

USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

NOTE:

1. REFER TO PARTS PAGE ID0255283, LOWER PLOW ARM/SWING POST, FOR SWINGPOST TO FRAME PINS+.

02

ID0255243

14

LOWER PLOW ARM/SWING POST H1052

5

4 3

FOOTNOTE 1

1

7

10

4 12

9

5

11 14 7

13 18

8

16 17

12

10

9

3

11

13 FOOTNOTE 1

4

14 19

6

15

5 2

4

14

5 13

13

14

NOTE SEAL ORIENTATION

03

ID0255283

15

LOWER PLOW ARM/SWING POST H1052

REF PART NO. NUMBER

QTY

1 301-0373 2 185-499 3 178-698 4 105-416 5 106-471 6 177-1064 7 125-421 8 178-782 9 310-926 10 107-010 11 106-345 12 105-318 13 149-967 14 125-486 15 105-894 16 110-270 17 305-256 18 106-628 19 105-1630

1 1 2 5 5 1 8 1 2 2 2 2 4 4 1 2 1 1 1

DESCRIPTION

SWING POST LOWER PLOW ARM PIN (1.750" X 7.260") WASHER (5/8") FLG SCREW (M16-2.00 X 30MM) PIN CLEVITE BUSHING (1.750") PIN (2.00" X 11.47") PIN CAP FLG LK SCREW (M12-1.75 X 30MM) SCREW (M20-2.50 X 50MM) WASHER (7/8") INTERNAL SEAL COMPOSITION BUSHING (2.000") LOCKNUT(M10-1.50,PRV TRQ,10.9) BOLT-ON CLAMP (9/16", HALF) BACKUP SPACER SCREW (M10-1.50 X 60MM) SHLD BLT (M16 X 15MM, M12-1.75)

REMARKS

USE LOCTITE 271 SEE FOOTNOTE 1

USE LOCTITE 271

USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

1. REFER TO PARTS PAGE ID0255243, ATTACHMENT FRAME COMBO-DRAWBAR, FOR BUSHING PLACEMENT LOCATION.

NOTE:

03

ID0255283

16

UPPER PLOW ARM H1052

23 1

2

23 21

24

4

9

2

4 5

17

4

22

18

4

21 24

5 26

3

26

9 9

19

47 20

19

28

6 27

10 25

3 10

3

13 12

9

8

3

11 16

03

15

14

8

ID0255293

17

UPPER PLOW ARM H1052

REF PART NO. NUMBER

QTY

1 185-966 2 116-667 3 105-743 4 105-071 5 106-709 6 325-776 7 105-828 8 116-348 9 106-345 10 184-064 11 300-3192 12 152-083 13 125-844 14 125-754 15 181-504 16 116-404 17 181-974 18 106-471 19 125-538 20 183-876 21 310-926 22 177-091 23 125-486 24 107-010 25 183-883 26 177-309 27 110-220 28 125-545

1 UPPER PLOW ARM 2 SHEAR MOUNT (7.12" SQ X 3" TH) 12 FLG LK SCREW (M12-2.00 X 45MM) 14 WASHER (1/2") 12 FLG LK NUT (M12-1.75) 1 RADIUS ARM 4 FLG LK BOLT (1/2-NC X 3/4") 4 BUMPER 4 SCREW (M20-2.50 X 50MM) 2 TAPERED INSERT (2") 1 TAPERED PIN (2.000" X 9.100") 1 CYL (4.0 X 2.00 X 15.0) 1 COMPOSITION BUSHING (2") 1 COMPOSITION BUSHING (2") 2 BUSHING 2 WASHER (2.060", RUBBER) 1 TAPERED INSERT (1.5") 1 FLG SCREW (M16-2.00 X 30MM) 2 COMPOSITION BUSHING (1.5") 1 TAPERED PIN (38.1MM X 215MM) 2 PIN CAP 1 PIN (2.00" X 12.65) 2 COMPOSITION BUSHING (2.000") 2 FLG LK SCREW (M12-1.75 X 30MM) 1 TAPERED PIN (50.8MM X 150MM) 2 COMPOSITION BUSHING (2") 1 MACH BUSHING (1-1/2", 14GA) 1 MACH BUSHING (18GA, 1-1/2")

DESCRIPTION

REMARKS

USE LOCTITE 271 USE LOCTITE 271 USE SEAL REPAIR KIT 190-189.

USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0255293

18

VIBRATOR STEERING H732, H752 H932, H952, H1032, H1052

3

4

13

2 4

15

16

12

3

3

8

23 20 22

7

16

17 19

11 10 5

15

21 22 20

23

9

3

18

4

1

6 5

14

8

6

18

8

1

1

11

HT115 & RT115Q RT70, RT90, RT115

ID0027253

19

VIBRATOR STEERING H732, H752 H932, H952, H1032, H1052 REF PART NO. NUMBER

1 324-647 2 312-403 3 126-131 4 125-538 5 110-220 6 116-519 7 310-919 8 107-009 9 115-002 10 115-001 11 115-017 12 115-020 13 178-779 14 178-780 15 107-745 16 105-505 17 106-471 18 310-921 19 105-416 20 110-895 21 125-773 22 116-520 23 110-259

QTY

DESCRIPTION

1 REVERSIBLE LOWER CLEVIS 1 UPPER CLEVIS 4 THRUST BUSHING SET (1.5") 4 COMPOSITION BUSHING (1.5") 2 MACH BUSHING (1-1/2", 14GA) 4 WASHER (M40, RUBBER) 2 PIN 4 FLG LK SCREW (M12-1.75 X 25MM) 1 ZERK (02N90) 1 ZERK (02N) 1 ZERK (02N65) 1 ZERK (02N) 1 CLEVIS PIN (2.00" X 9.36") 1 CLEVIS PIN (2.00" X 9.16") 2 CASTLE NUT (1-1/2-NF) 2 ROLL PIN (1/4" X 2-1/2") 2 FLG SCREW (M16-2.00 X 30MM) 2 PIN 2 WASHER (5/8") 3 MACHINERY BUSHING (1.750") 2 COMPOSITION BUSHING (1.75") 4 WASHER (M46, RUBBER) 2 BOLT-ON CLAMP (.625")

REMARKS

SEE FOOTNOTE 1 USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

1. USE 125-545 AS NEEDED IN PLACE OF 110-220

NOTE:

11

ID0027253

20

STOW LOCK H1032, H1052

5 4

6 3 8

7 10

1

2 7 9

8

3

07

ID0251753

21

STOW LOCK H1032, H1052 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10

315-140 177-1078 115-511 315-517 110-377 105-044 105-884 116-403 105-065 115-584

QTY

1 1 2 1 1 1 2 2 1 1

DESCRIPTION

HOOK HEAVY STOW LOCK PIN KLIP RING (1.50") STOW LOCK HANDLE KNOB (1/2-NC, BLUE) JAM NUT (1/2-NC) WASHER (1/2") FRICTION WASHER (.560") LOCKNUT (1/2-NC) TORSION SPRING

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. UNITS PRIOR TO S/N XXXXXX AND YYYYY USE STOW LOCK PIN 183-624.

NOTE:

07

ID0251753

22

DRIVE HOSE CLAMP H1052

17

1

18

12

13

14

4

3

5

2

6

15 7 15

02

11

10

16

8

9

ID0255294

23

DRIVE HOSE CLAMP H1052

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

331-658 125-770 145-906 105-118 105-069 106-124 125-538 179-171 110-220 105-416 106-343 110-359 315-753 105-271 105-894 106-545 106-398 110-333

QTY

DESCRIPTION

1 HOSE CLAMP ARM 1 COMPOSITION BUSHING (1.000") 1 PIVOT TUBE 1 WASHER (3/8") 1 WASHER (.406") 1 SCREW (M10-1.50 X 110MM) 1 COMPOSITION BUSHING (1.5") 1 HOSE CLAMP SUPPORT PIN 1 MACH BUSHING (1-1/2", 14GA) 1 WASHER (5/8") 1 SCREW (M16-2.00 X 110MM) 2 BOLT-ON CLAMP (1-1/2", SET) 2 BACK UP-PLATE 2 SCREW (M10-1.50 X 40MM) 3 LOCKNUT(M10-1.50,PRV TRQ,10.9) 1 LOCKNUT (M16-2.0,PRV TRQ,10.9) 1 WASHER (M16, HARDENED) 1 BOLT-ON CLAMP (1")

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0255294

24

ATTACHMENT SENSOR MOUNT H1052

2 1

2 1

01

3

5

4 6

ID0255479

25

ATTACHMENT SENSOR MOUNT H1052

REF PART NO. NUMBER

1 2 3 4 5 6

220-556 107-895 214-105 110-373 106-561 106-163

QTY

DESCRIPTION

2 TDM BOOM SENSOR 4 SCREW #10-24 X 2 1/4" SOC HEAD 1 FLEX GUARD (CONVOLUTED LOOM) 2 BOLT-ON CLAMP (13/16") 2 LOCKNUT (M8-1.25,PRV TRQ,10.9) 2 FLG SCREW (M8-1.25 X 30MM)

REMARKS

USE 1 @ 24"

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0255479

26

PIVOT H1052

21

18

17 19 20

14

16

13

15

15

9

8 23

12

11

22 16

10

14 7 11

6

12

10

2 1 3 1.88

4

5

1.88

24 9

8

PIVOT SLEEVE DETAIL 03

ID0255161

27

PIVOT H1052 REF PART NO. NUMBER

1 145-853 2 314-532 3 314-531 4 105-371 5 105-340 6 105-293 7 314-503 8 145-980 9 145-1492 10 311-338 11 106-356 12 106-486 13 115-002 14 125-782 15 181-504 16 115-781 17 179-016 18 106-345 19 184-031 20 151-048 21 125-781 22 125-783 23 183-615 24 301-1175

QTY

DESCRIPTION

1 PIVOT 1 WEAR STRIP 1 CLAMP 6 BOLT (3/4"-NC X 6-1/2") 6 FLG LOCKNUT (3/4-NC) 5 BOLT (1/2-NC X 3/4") 1 PIVOT CAP 1 PIVOT SLEEVE 1 PIVOT SLEEVE 7 SHIM 6 FLG NUT (M20-2.50, CL 10) 6 FLG SCREW(M20-2.50X 90MM,10.9) 2 ZERK (02N90) 2 SPRING BUSHING (2.250") 2 BUSHING 2 KLIP RING (2.000") 1 TAPERED PIN (57.1MM X 215MM) 1 SCREW (M20-2.50 X 50MM) 1 TAPERED INSERT (2.25") 1 CYL (4.0 X 2.25 X 12.0) 1 COMPOSITION BUSHING (2.259") 1 SPRING BUSHING (2.25") 1 PIN 1 H1052 FRAME

REMARKS

SEE DETAIL FOR MOUNTING, SEE FOOTNOTE 1 SEE DETAIL FOR MOUNTING, SEE FOOTNOTE 1 USE AS REQUIRED USE LOCTITE 271

USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

1. ZERK HOLES MAY NOT BE CENTERED ON SLOTS.

NOTE:

1. REFER TO PIVOT LIFT HYDRAULICS, ID025513, FOR CYLINDER INFORMATION.

03

ID0255161

28

HEADSHAFT H1052

4

25

5

3 4 8

2

7 8 5 6

10 9

16

15 11

12

13 14

1

13 11

16 15 17

24

23

14

12

20 21 22

10

02

9

18

19

23

ID0255140

29

HEADSHAFT H1052

REF PART NO. NUMBER

QTY

1 167-147 2 166-056 3 363-426 4 105-271 5 105-071 6 105-828 7 361-123 8 116-348 9 105-423 10 105-961 11 184-027 12 145-475 13 155-805 14 125-258 15 125-259 16 180-071 17 145-476 18 110-058 19 110-078 20 181-499 21 142-009 22 105-497 23 105-970 24 105-384 25 105-829

1 12" HEADSHAFT 1 GEARBOX - 11.65:1 (STD) 1 MOUNT ASS'Y 3 SCREW (M10-1.50 X 40MM) 2 WASHER (1/2") 1 FLG LK BOLT (1/2-NC X 3/4") 1 WASHER (1/2") 2 BUMPER 2 WASHER (3/4") 2 BOLT (3/4-NC X 2") 2 SEAL SPACER 2 WASHER (3", NYLON) 2 INTERNAL SEAL (3.000") 2 TAPERED RACE (4.125") 2 TAPERED BEARING (2.25") 2 BACKUP SPACER 1 WASHER (5", NYLON) 1 MACH BUSHING (1.000", 18GA) 2 MACH. BUSHING (1", 14GA.) 1 SPROCKET HUB 1 HEADSHAFT SPROCKET 16 CAM WASHER (5/8") 8 FLG BOLT (5/8-NC X 1-3/4,GD8) 1 WASHER (3/4") 1 FLG LK BOLT (1/2-NC X 1")

DESCRIPTION

REMARKS

SEE FOOTNOTE 1

SEE FOOTNOTE 2 USE LOCTITE 271

USE AS REQUIRED USE AS REQUIRED SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1. OPTIONAL: 166-065 GEARBOX 14.24:1 (LO) OR 166-057 GEARBOX 8.66:1 (HI) 2. IF WASHER 361-123 IS TOO THICK SUBSTITUTE WASHER 319-182.

3. SPLIT SPROCKET 140-717 IS OPTIONAL, SEE INSTALLATION DIAGRAM 052-712.

NOTE:

WHEN SHIMMING HEADSHAFT USE SPACER 184-044 INSTEAD OF GEARBOX.

02

ID0255140

30

DIGGING CHAIN GUARD H1052

17

1

2

3

13

5

8 5

4

14 3 7

02

10

12

16

4

11 9

6

15

ID0255173

31

DIGGING CHAIN GUARD H1052

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

305-883 305-884 116-358 314-658 107-366 314-526 105-826 196-124 308-703 105-512 110-150 105-271 105-894 160-335 105-213 106-385 107-003

QTY

DESCRIPTION

1 CHAIN GUARD 1 SPOILS FLAP 2 GAP FLAP 2 CLAMP BAR 6 SCREW (M6-1.00 X 30MM, 8.8) 1 ARM 2 FLG LK BOLT (3/8-NC X 1") 1 CONTROL CABLE (16.30") 1 CRANK 1 COTTER PIN (.094 X .750) 1 CLEVIS PIN (5/16" X 1") 1 SCREW (M10-1.50 X 40MM) 1 LOCKNUT(M10-1.50,PRV TRQ,10.9) 1 BALL JOINT (5/16-NF) 1 NUT (5/16-NF) 3 FLG LOCKNUT (M6-1.00) 4 FLG LK SCREW (M12-1.75 X 35MM)

REMARKS

USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0255173

32

NOTES:

ID0134963

33

ASSEMBLY DRAWINGS

ID0134912

34

VIBRATOR HOUSING

H932, H952 - BEGINS WITH S/N: CMWH932XEC0000207 & CMWH952_ _ _ _ _ _ _ H1032, H1052 - BEGIN W-S/N: CMWH1032TB0000136 & CMWH1052CB0000004 H1032 - ENDS WITH S/N: CMWH1032HD0000409 & CMWH1032JD0000027

9 8 5 4

2 1 8

15

14

15

9 6

10

9 7 9

2

13

7

12 11

12

8 9

10 10 3 11 14 13 10

9

8

SEE FOOTNOTE 3

15

03

3

10

ID0271290

35

VIBRATOR HOUSING

H932, H952 - BEGINS WITH S/N: CMWH932XEC0000207 & CMWH952_ _ _ _ _ _ _ H1032, H1052 - BEGIN W-S/N: CMWH1032TB0000136 & CMWH1052CB0000004 H1032 - ENDS WITH S/N: CMWH1032HD0000409 & CMWH1032JD0000027 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1 VIBRATOR 2 COVER PLATE MACHINING 2 PLUG (16S) 1 SIGHT GAUGE (16S) 1 O-RING (916 D90) 1 PLUG, MAGNETIC (-16S) 20 SCREW (M16-2.00 X 185MM) 8 SCREW (M16-2.00 X 70MM) 28 WASHER (M16, HARDENED) 28 FLG NUT (M16-2.00, 10.9) 2 BEARING RETAINER 8 SCREW (M8-1.25 X 25MM, SOC) 4 DOWEL PIN (3/8" X 1-1/2") 3 PLATE 12 FLG LK SCREW (M12-1.75 X 25MM)

301-1872 166-620 155-138 110-111 155-748 152-150 105-744 106-341 106-398 106-355 315-731 106-916 105-536 312-760 106-806

DESCRIPTION

REMARKS

SEE FOOTNOTE 3 & 4 SEAL WITH SILICONE - REFER TO FOOTNOTES 1 & 2.

INCLUDES O-RING, REF. #5 INCLUDES O-RING, REF. #5 INCLUDES O-RING, REF. #5

NOT SHOWN:

FOOTNOTES:

1. COVERS, REF. # 2, MUST BE USED IN PAIRS. DO NOT MIX OLD AND NEW COVERS ON VIBRATOR HOUSING. 2. REFER TO PREVIOUS VIBRATOR HOUSING PAGE (ID0251485) FOR OLDER INFORMATION REGARDING HOUSING AND COVERS. 3. NOT SHOWN: WELD-IN REPLACEMENT UPPER BOSS P/N 300-5334. USE ONLY IN PAIRS. WELD-IN REPLACEMENT SLOTTED BOSS P/N 301-0766. USE ONLY IN PAIRS. 4. SEE PARTS PAGE "ID323473, VABRATOR HOUSING" FOR VIBRATOR REPLACEMENT ON THE H1032 & H1052.

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS. 2. FOR REPLACEMENT FRAMES ON H732 & H752 SEE PARTS LIST ABOVE. ALL H SERIES VIBRATORS NOW USE THE SAME VIBRATOR FRAME.

03

ID0271290

36

VIBRATOR HOUSING

BEGINS WITH S/N CMWH1032AD0000410, CMWH1052CD0000028

15 1

14 4 5

10

6

7

2 11

16

12

10

13

8 9

14 15 3

02

14

10

ID0323473

37

VIBRATOR HOUSING

BEGINS WITH S/N CMWH1032AD0000410, CMWH1052CD0000028 REF PART NO. NUMBER

QTY

DESCRIPTION

1 301-5633 1 SHAKER FRAME 2 166-620 2 COVER PLATE MACHINING 3 155-138 2 PLUG (16S) 4 152-150 1 PLUG, MAGNETIC (-16S) 5 155-748 1 O-RING (916 D90) 6 110-111 1 SIGHT GAUGE (16S) 7 105-744 20 SCREW (M16-2.00 X 185MM) 8 106-341 6 SCREW (M16-2.00 X 70MM) 9 106-398 6 WASHER (M16, HARDENED) 10 106-355 18 FLG NUT (M16-2.00, 10.9) 11 315-731 1 BEARING RETAINER 12 106-916 4 SCREW (M8-1.25 X 25MM, SOC) 13 105-536 2 DOWEL PIN (3/8" X 1-1/2") 14 312-760 3 PLATE 15 106-806 12 FLG LK SCREW (M12-1.75 X 25MM) 16 125-526 2 BEARING (SPHERICAL ROLLER)

REMARKS

SEE FOOTNOTE 3 SEAL WITH SILICONE - REFER TO FOOTNOTES 1 & 2.

INCLUDES O-RING, REF. #5 INCLUDES O-RING, REF. #5 INCLUDES O-RING, REF. #5

NOT SHOWN:

FOOTNOTES:

1. COVERS, REF. # 2, MUST BE USED IN PAIRS. DO NOT MIX OLD AND NEW COVERS ON VIBRATOR HOUSING. 2. REFER TO PREVIOUS VIBRATOR HOUSING PAGE (ID0251485) FOR OLDER INFORMATION REGARDING HOUSING AND COVERS. 3. MUST USE SHORTER 179-738 PIN AT IN BOTTOM REAR POSITION THIS PIN REPLACES 185-1100 PIN.

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS. 2. FOR REPLACEMENT FRAMES ON H732 & H752 SEE PARTS LIST ABOVE. ALL H SERIES VIBRATORS NOW USE THE SAME VIBRATOR FRAME.

02

ID0323473

38

VIBRATOR HOUSING

H732, H752, H932, H952, H1032 & H1052 ENDS WITH S/N:CMWH932XEC0000206 & CMWH952_ _ _ _ _ _ _

9

8 7

1 9

2

5 4

15

14

15

9

8

6 10 12

9

14 7

2

13

11

12

10 3

9

11

14

13

8

8 10

9

8

15 SEE FOOTNOTE 4 3

05

ID0251485

39

VIBRATOR HOUSING

H732, H752, H932, H952, H1032 & H1052 ENDS WITH S/N:CMWH932XEC0000206 & CMWH952_ _ _ _ _ _ _ REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1 VIBRATOR FRAME 2 COVER PLATE MACHINING 2 PLUG (16S) 1 SIGHT GAUGE (16S) 1 O-RING (916 D90) 1 PLUG, MAGNETIC (-16S) 13 SCREW (M16-2.00 X 185MM) 8 SCREW (M16-2.00 X 70MM) 28 WASHER (M16, HARDENED) 28 FLG NUT (M16-2.00, 10.9) 2 BEARING RETAINER 8 SCREW (M8-1.25 X 25MM, SOC) 3 DOWEL PIN (3/8" X 1-1/2") 3 PLATE 12 FLG LK SCREW (M12-1.75 X 25MM)

324-629 166-620 155-138 110-111 155-748 152-150 105-744 106-341 106-398 106-355 315-731 106-916 105-536 312-760 106-806

DESCRIPTION

REMARKS

OBSOLETE, BEGANS WITH S/N 5Y0130 / REFER TO FOOTNOTE 1 SEAL WITH SILICONE - REFER TO FOOTNOTES 2 & 3.

INCL'S O-RING, REF #5 INCL'S O-RING, REF #5 INCL'S O-RING, REF #5

NOT SHOWN:

FOOTNOTES:

1. VIBRATOR FRAME 310-836, ENDS WITH S/N 5Y0129 & WAS REPLACED WITH VIBRATOR FRAME 324-629.

2. 166-371 VIBRATOR COVER IS REPLACED WITH 166-620 COVER. COVERS MUST BE USED IN PAIRS, DO NOT MIX COVERS ON THE SAME VIBRATOR ASSEMBLY. USE 166-620 FOR ALL REPLACEMENTS. 3. 166-620 IS USED ON: H732 BEGINS WITH S/N J60000001 H752 BEGINS WITH S/N 50000001 H932 BEGINS WITH S/N 5Z0808

H952 BEGINS WITH S/N 5Z0798 H1032 USES VIBRATOR 324-629 & COVER PLATES 166-620.

4. NOT SHOWN: WELD-IN REPLACEMENT UPPER BOSS P/N 300-5334. USE ONLY IN PAIRS. WELD-IN REPLACEMENT SLOTTED BOSS P/N 301-0766. USE ONLY IN PAIRS. NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS. 2. REFER TO VIBRATOR HOUSING BEGINS WITH S/N PP FOR REPLACEMENT FRAMES FOR H732 & H752.

05

ID0251485

40

VIBRATOR WEIGHTS H732, H752 H932, H952, H1032, H1052

10

4 4

9

10 6

7

8

F/N 4

9 9

6

7 3 7

3

8 F/N 4 1 4 5 2 4 5

11

13

11 12 04

14

13

ID0251486

41

VIBRATOR WEIGHTS H732, H752 H932, H952, H1032, H1052 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14

1 RIGHT SHAFT ASSEMBLY 1 LEFT SHAFT ASSEMBLY 4 KEY (3/8" X 2-29/64") 4 BEARING (SPHERICAL ROLLER) 2 EXTERNAL SNAP RING (2.165") 4 VIBRATOR WEIGHT 8 SCREW (M16-2.00 X 130MM, 10.9) 7 WASHER (M16, HARDENED) 8 NUT, FLG (M16-2.00, CL10, ZC) 4 VIBRATOR WEIGHT 4 VIBRATOR WEIGHT 8 SCREW (M12-1.75 X 120MM) 10.9 16 WASHER (7/16") 8 HEX NUT (M12-1.75, 10.9) ZP

185-506 185-507 165-929 125-526 115-498 185-111 106-619 106-398 106-355 185-115 185-136 105-1669 105-059 106-089

DESCRIPTION

REMARKS

INCL'S GEAR & MOTOR DRIVE HUB. REFER TO F/N 5, 6 & 7 INCL'S GEAR. REFER TO F/N 5, 6 & 7 REFER TO F/N 7 REFER TO FOOTNOTE 1 USE LOCTITE #271 REFER TO FOOTNOTE 4 TORQUE TO 175 ft./lbs. (240 N-m) REFER TO FOOTNOTE 2 REFER TO FOOTNOTE 3 USE LOCTIE #271 TORQUE TO 70 ft./lbs. (240 N-m)

NOT SHOWN:

FOOTNOTES:

1. WEIGHTS ARE FOR 601-038 H932/H952 2. WEIGHTS ARE FOR 601-039 H932/H952 & H1032 3. WEIGHTS ARE FOR 601-035 H732/H752 4. H932/H952 M16 WASHER THIS SIDE ONLY WHEN USING FLANGE FACE NUT (REF #8) 106-355.

5. 166-525 RT. SHAFT ASS'Y. IS SUPERCEDED BY 185-506 166-524 LFT. SHAFT ASS'Y. IS SUPERCEDED BY 185-507.

DO NOT MIX OLD/NEW PARTS IN THE SAME VIBRATOR ASSEMBLY. USE 185-506/185-507 FOR ALL REPLACEMENTS. 6. 185-506/185-507 IS USED ON:: H732, BEGINS WITH S/N J60000001 H752, BEGINS WITH S/N A60000015 H932, BEGINS WITH S/N J60000056.

H952, BEGINS WITH S/N K60000052.

7. REQUIRES ASS'Y KIT 190-1086. TAPERED BEARING ALIGNMENT PINS & BEARING DRIVER (SPECIAL TOOLS).

NOTE:

04

ID0251486

42

VIBRATOR WEIGHTS

H1032, H1052 BEGINS WITH S/N: CMWH1032ADOOOO410; CMWH1052CDOOOO028

10 9

4

7

8

9

6 3

8 7

1

2 4

5

14 11 12 04

13

ID0323434

43

VIBRATOR WEIGHTS

H1032, H1052 BEGINS WITH S/N: CMWH1032ADOOOO410; CMWH1052CDOOOO028 REF PART NO. NUMBER

QTY

1 185-1120 2 185-507 3 165-929 4 125-526 5 115-498 6 185-111 7 106-619 8 106-398 9 106-355 10 185-115 11 185-136 12 105-1669 13 105-059 14 106-089

1 RIGHT SHAFT ASSEMBLY 1 LEFT SHAFT ASSEMBLY 4 KEY (3/8" X 2-29/64") 4 BEARING (SPHERICAL ROLLER) 2 EXTERNAL SNAP RING (2.165") 4 VIBRATOR WEIGHT 8 SCREW (M16-2.00 X 130MM, 10.9) 8 WASHER (M16, HARDENED) 8 NUT, FLG (M16-2.00, CL10, ZC) 4 VIBRATOR WEIGHT 4 VIBRATOR WEIGHT 8 SCREW (M12-1.75 X 120MM) 10.9 16 WASHER (7/16") 8 HEX NUT (M12-1.75, 10.9) ZP

DESCRIPTION

REMARKS

SEE FOOTNOTES 1, 2, 3

SEE FOOTNOTE 4

NOT SHOWN:

FOOTNOTES:

1. 185-1120 REPLACES 185-506 RT. SHAFT ASS'Y. DO NOT MIX OLD/NEW PARTS IN THE SAME VIBRATOR ASSEMBLY. USE 185-1120/185-507 FOR ALL REPLACEMENTS. 2. 185-1120/185-507 IS USED ON: H1032, BEGINS WITH S/N: CMWH1032ADOOOO410 H1052, BEGINS WITH S/N: CMWH1052CDOOOOO28 3 REQUIRES 150-3744 MOTOR (15 SPLINE SHAFT) AND ASSOCIATED PLUMBING. 4. WEIGHTS ARE FOR 601-039 H932/H952 & H1032

NOTE:

04

ID0323434

44

SKID SHOE / SOD CUTTER H732, H752 H932, H952, H1032, H1052

2

3

1

5 6

9

7

6 8

04

4

ID0251854

45

SKID SHOE / SOD CUTTER H732, H752 H932, H952, H1032, H1052 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

107-336 331-661 106-355 320-547 116-100 105-982 105-915 105-319 351-582

QTY

4 1 4 1 1 4 2 2 2

REMARKS

DESCRIPTION

FLG SCREW (M16-2.00X45MM,10.9) SOD CUTTER FLG NUT (M16-2.00, 10.9) SKID SHOE SHOCK MOUNT WASHER (2.062") WASHER (.781") BOLT (3/4-NC X 1-1/2") KEY (1/4" X 3-3/4")

INCL'D IN SHIP KIT 190-1555 - FOOTNOTE 1, FOOTNOTE 3

REFER TO FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. REFER TO "ATTACHMENT FRAME / DRAWBAR" ID0251903 FOR MORE INFO. 2. REF NO'S 4 & 5 ARE INCLUDED IN ASSEMBLY 320-546.

3. OPTIONAL HEAVY SOD CUTTER 185-1092

NOTE:

04

ID0251854

46

HYDRAULIC CONTROL LEVERS H1052

2

3 4 1 6

1

7

8 11

5

10

6

9 13

12 16

14

15

01

ID0255433

47

HYDRAULIC CONTROL LEVERS H1052

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

116-921 110-442 116-941 110-439 179-301 105-881 106-163 106-561 106-678 105-152 160-540 105-878 179-886 105-508 110-082 107-790

QTY

DESCRIPTION

4 HANDLE 1 HANDLE (3/8-NC, GREEN) 1 HANDLE (3/8-NC, GREEN) 2 HANDLE (3/8-NC, BLACK) 1 BRONZE BUSHING (.375) 5 WASHER (5/16") 4 FLG SCREW (M8-1.25 X 30MM) 1 LOCKNUT (M8-1.25,PRV TRQ,10.9) 4 LOCKNUT (1/4-NF) 4 NUT (1/4-NF) 4 ROD END 4 NUT (1/4-NF, LH) 4 ROD (12.15") 4 COTTER PIN (3/32" X 1") 4 CLEVIS PIN (1/4 X 11/16) 4 CLEVIS (1/4-NF-LH)

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0255433

48

NOTES:

ID0134963

49

HYDRAULICS

ID0135071

50

BLADE STEER HYDRAULICS H1052

#14 1 2 3 11 4 2

14

15

#15

5 11

10

7

13 20

10 11

6

8

18

9

12 20 REFER TO NOTE SECTION 18

19

16

16 19

7 6

17 8

02

ID0255058

51

BLADE STEER HYDRAULICS H1052

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

1 HYD CONTROL VALVE (4-SPOOL) 4 FLG LK SCREW (M8-1.25 X 25MM) 1 CONNECTOR (04O-08S) 1 CONNECTOR (04O-08S90) 1 ABRASION SLEEVE (1.59" X 84") 2 CYL (3.0 X 1.50 X 10.0) 2 COMPOSITION BUSHING (1.5") 2 COMPOSITION BUSHING (1.75") 2 BK CONNECTOR (04O-04O90BK) 4 WASHER (9/16" HARDENED) 3 UNION (04O-04OFX90) 1 HOSE (04OFX45-40"-3000) 1 HOSE (04OFX45-40"-3000) 1 HOSE (04OFX-82"-3000) 1 HOSE (04OFX-82"-3000) 1 HOSE (04OFX45S-16.5"-3000-WG) 1 HOSE (04OFX45S-16.5"-3000-WG) 2 CONNECTOR (04O-06S45) 2 BRANCH TEE (06S-04O-04O) 2 ABRASION SLEEVE (1.00" X 40"")

158-029 106-381 154-261 154-276 115-817 151-029 125-538 125-773 154-355 106-598 154-255 515-156 515-156 154-724 154-724 153-865 153-865 154-250 154-230 117-717

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS. 2. REFER TO "VIBRATOR STEERING", ID0027253, FOR INFO ON THESE CLAMPS.

02

ID0255058

52

PLOW LIFT HYDRAULICS H1052

1

3

2

5

6 4

2

7

4 2 #5

02

#6

ID0255057

53

PLOW LIFT HYDRAULICS H1052

REF PART NO. NUMBER

1 2 3 4 5 6 7

514-294 154-227 154-228 117-714 150-3167 154-806 110-031

QTY

DESCRIPTION

1 CONNECTOR (08S-06O, ORF) 3 CONNECTOR (06O-08S90) 1 UNION (06O-06OFX90) 2 ABRASION SLEEVE (1.00" X 54") 1 HOSE (06OFX45-56"-4000) 1 HOSE (06OFX-54"-3000) 1 CABLE TIE (1/2") 20" LG

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. REFER TO ID0255086, GEARBOX & VIBRATOR DRIVE, FOR MORE HOSES TO SECURE WITH THIS CABLE TIE, 110-031.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

02

ID0255057

54

PLOW SWING HYDRAULICS H1052

7 9 4 RETURN POWER BEYOND

7

SUPPLY 3 6

5

7

2

1

8

16 15 14

10

17

18 19 17

20

21 12

13

#19 #7 #7 02

#18

ID0255108

55

PLOW SWING HYDRAULICS H1052

REF PART NO. NUMBER

1 309-756 2 107-009 3 155-163 4 153-998 5 154-276 6 154-226 7 154-399 8 105-071 9 153-995 10 125-773 12 181-974 13 106-471 14 178-699 15 110-220 16 115-466 17 154-250 18 154-934 19 154-934 20 151-136 21 125-538

QTY

DESCRIPTION

1 PIN 1 FLG LK SCREW (M12-1.75 X 25MM) 1 REDUCER (08S-06SF) 2 ORIFICE PLATE (.062) 1 CONNECTOR (04O-08S90) 1 CONNECTOR (04O-06S90) 3 CONNECTOR (10S-10O45) 3 WASHER (1/2") 2 CONNECTOR (08S-08SF) 1 COMPOSITION BUSHING (1.75") 1 TAPERED INSERT (1.5") 1 FLG SCREW (M16-2.00 X 30MM) 1 PIN 1 MACH BUSHING (1-1/2", 14GA) 1 EXTERNAL SNAP RING (1.500") 2 CONNECTOR (04O-06S45) 1 HOSE (04OFX45-18"-3000) 1 HOSE (04OFX45-18"-3000) 1 CYL (3.0 X 1.50 X 8.0) 1 COMPOSITION BUSHING (1.5")

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

02

ID0255108

56

PIVOT LIFT HYDRAULICS H1052

4 5 6

7 2 8

8

5 1

3

5

02

ID0262779

57

PIVOT LIFT HYDRAULICS H1052

REF PART NO. NUMBER

1 2 3 4 5 6 7 8

151-048 125-781 125-783 154-357 154-227 157-983 157-983 117-717

QTY

1 1 1 1 3 1 1 2

DESCRIPTION

REMARKS

CYL (4.0 X 2.25 X 12.0) COMPOSITION BUSHING (2.259") SPRING BUSHING (2.25") CONNECTOR (06O-08S90, ORF) CONNECTOR (06O-08S90) HOSE (06OFX45S-45"-5000) HOSE (06OFX45S-45"-5000) ABRASION SLEEVE (1.00" X 40"")

NOT SHOWN:

FOOTNOTES:

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS. 2. FOR MORE INFORMATION REFER TO PARTS PAGES: ID0255086, "GEARBOX & VIBRATOR DRIVE HYD." AND ID0255161, "PIVOT"

02

ID0262779

58

GEARBOX & VIBRATOR DRIVE HYDRAULICS H1052

42

TO PUMP

30

1 29

27

4 27

33 FOOTNOTE 1

32

39 3 "B" PORT ON PUMP

2

27 23 21

41 41

TO TANK

40 26

31

25 "B" 22 6 17 21

"F" 21

20

18

8 10

5

25

20

24

38

9

FOOTNOTE 2

37

7 36

19

28 11

35

13

21

12 34

21

05

14 15

16

ID0255086

59

GEARBOX & VIBRATOR DRIVE HYDRAULICS H1052

REF PART NO. NUMBER

QTY

1 158-805 2 178-186 3 106-893 4 106-538 5 153-243 6 105-624 7 106-386 8 307-460 9 105-883 10 106-390 11 106-499 12 106-202 13 157-454 14 158-286 15 106-547 16 105-159 17 154-963 18 149-660 19 159-077 20 154-290 21 154-306 22 154-371 23 153-249 24 154-322 25 156-273 26 154-377 27 154-226 28 154-234 29 105-095 30 515-093 31 154-258 32 117-198 33 110-930 34 515-400 35 515-400 36 515-059 37 117-764 38 515-224 39 515-186 40 154-963 41 515-621 42 154-265

1 HYD CONTROL VALVE (4-WAY,2POS) 1 CLAMP PLATE 2 SCREW (M6-1.00 X 55MM) 2 LOCKNUT (M6-1.00,PRV TRQ,10.9) 1 HYDRAULIC CONTROL VALVE 2 SCREW (M8-1.25 X 70MM, SOC) 2 FLG LOCKNUT (M8-1.25) 1 VALVE BRACKET 1 FLG LK BOLT (3/8-NC X 2") 1 WASHER (M10) 2 FLG BOLT (1/2-NC X 1-1/2",GD8) 2 FLG BOLT (1/2-NC X 1-1/4",GD8) 1 HYDRAULIC MOTOR 1 HYDRAULIC MOTOR 2 SCREW (M12-1.75 X 40MM,10.9) 2 CAM WASHER (1/2") 1 HOSE (040FX45-24"-3000) 2 HYD LINE (-16) 2 SPLIT FLANGE (16SFL) 3 UNION (16O-16OFX90) 6 CONNECTOR (12S-16O) 1 CONNECTOR (12S-16O45) 1 CONNECTOR (16O-16OFX45) 1 CONNECTOR (08O-10S90) 2 CONNECTOR (02N-04O90) 1 CONNECTOR (12S-16O90) 4 CONNECTOR (04O-06S90) 1 CONNECTOR (08O-12S) 2 WASHER (1/4") 1 HOSE (04OFX90S-42-3000) 1 TEE (08O) 2 ABRASION SLEEVE (2.07" X 102") 80 SPIRAL WRAP (1.5",SOLD PER FT) 1 HOSE (16OFX45-94"-6000) 1 HOSE (16OFX45-94"-6000) 1 HOSE (08OFX45-94"-3000) 1 ABRASION SLEEVE (1.59" X 90") 1 HOSE (08OFX90-21"-3000) 1 HOSE (04OFX90L-81"-3000) 1 HOSE (04OFX45-24"-3000) 2 HOSE (16OFX-50"-6000) 1 UNION RUN TEE (04OFX-04O-04O)

DESCRIPTION

REMARKS

USE RTV SILICONE TO SEAL TO BOX USE RTV SILICONE TO SEAL TO BOX

LOCTITE 567 OR EQUIVALENT ON PIPE THREAD END

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. SPIRAL WRAP, 110-930, BEGINS 43" FROM FACE OF FITTING, 154-306.

2. REFER TO "DRIVE HOSE CLAMP", ID0255294, FOR PARTS BREAK DOWN ON CLAMPS.

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

05

ID0255086

60

CYL (4.0 X 2.00 X 15.0)

2

11

3

8

5

6

7

4

13 9 14

10 12 1

03

ID0143387

61

CYL (4.0 X 2.00 X 15.0) REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

158-182 149-737 149-006 149-307 149-303 157-559 157-035 157-036 157-570 106-144 157-558 106-145 157-044 125-793

QTY

1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CYLINDER BARREL (4.0 X 15.0) CYLINDER ROD (2.00 X 16.0) CYLINDER HEAD (4.0 X 2.00) CYLINDER PISTON (4.0 X 2.00) LOCK RING (4.0) U-SEAL (2.000") O-RING (342 D90) BACKUP RING (342 D90) BACKUP RING (238 D90) WASHER (1") WIPER SEAL (2.000") BOLT (1-NC X 2-1/4", GD8) O-RING (238 D90) WEAR RING

INCLUDES CAPLUG 111-009

SEAL REPAIR KIT (4.0" X 2.0")

INCLUDES REF NO.'S 6-14

NOT SHOWN:

190-189

FOOTNOTES:

NOTE:

03

ID0143387

62

HYDRAULIC CYLINDERS (2.5" x 1.5") 1

6

5

7 8 4 9 3 10

2

04

ID0015833

63

HYDRAULIC CYLINDERS (2.5" x 1.5") REF PART NO. NUMBER

QTY

1 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

CYL (2.5 X 1.5 X 2.5) CYLINDER BARREL (2.5 X 2.5) CYLINDER ROD (1.50 X 2.5) CYL (2.5 X 1.5 X 3.0) CYLINDER BARREL (2.5 X 3.0) CYLINDER ROD (1.50 X 3.0) CYL (2.5 X 1.5 X 4.0) CYLINDER BARREL (2.5 X 4.0) CYLINDER ROD (1.50 X 4.0) CYL (2.5 X 1.5 X 5.0) CYLINDER BARREL (2.5 X 5.0) CYLINDER ROD (1.50 X 5.0) CYL (2.5 X 1.5 X 6.0) CYLINDER BARREL (2.5 X 6.0) CYLINDER ROD (1.50 X 6.0) CYL (2.5 X 1.5 X 8.0) CYLINDER BARREL (2.5 X 8.0) CYLINDER ROD (1.50 X 8.0) CYL (2.5 X 1.5 X 10.0) CYLINDER BARREL (2.5 X 10.0) CYLINDER ROD (1.50 X 10.0) CYL (2.5 X 1.5 X 12.0) CYLINDER BARREL (2.5 X 12.0) CYLINDER ROD (1.50 X 12.0) CYL (2.5 X 1.5 X 16.0) CYLINDER BARREL (2.5 X 16.0) CYLINDER ROD (1.50 X 16.0) CYL (2.5 X 1.5 X 20.0) CYLINDER BARREL (2.5 X 20.0) CYLINDER ROD (1.50 X 20.0) CYL (2.5 X 1.5 X 24.0) CYLINDER BARREL (2.5 X 24.0) CYLINDER ROD (1.50 X 24.0)

3 4 5 6 7 8 9 10

150-768 150-779 150-986 106-098 500-031 157-021 157-542 157-539

1 1 1 1 1 1 1 1

CYLINDER HEAD (2.5 X 1.50) LOCK RING (2.5) CYLINDER PISTON (2.5 X 1.50) FLG BOLT (3/4-NC X 2", GD8) O-RING (228 D90) BACKUP RING (228 D90) U-SEAL (1.500") WIPER SEAL (1.500")

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

REMARKS

DESCRIPTION

149-676 152-022 149-731 149-677 152-005 150-431 149-678 150-283 150-434 149-679 149-810 153-038 149-680 152-010 153-003 149-681 150-295 153-027 151-200 150-692 150-416 151-071 152-015 150-426 151-035 150-289 150-419 149-798 149-762 150-669 151-090 152-026 150-447

SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1, 2 & 4 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 .

INCL. MOLDED-ON WEAR RING, SEE FOOTNOTE 4 SEE FOOTNOTE 3

NOT SHOWN:

259-100 259-235 259-239 259-241 259-188

U-SEAL INSTALLER (1" - 1.499") 1.00 ROD WIPER TOOL WIPER/SEAL INSTALLER (2") PISTON INSTALLER (2") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. REF. #1 & #2 ARE SPECIFIC TO EACH CYLINDER, REF. #3 THRU #10 ARE COMMON FOR ALL THE ABOVE LISTED CYLINDERS. 2. SEAL REPAIR KIT P/N: 190-170 3. APPLY LOCTITE 277 OR EQUIVALENT, TORQUE TO 290-325 FT-LBS 4. SUBSTITUTE FOR 150-986 CYL PISTON : {150-7531 CYL PISTON, 125-775 WEAR RING, 157-535 BACKUP RING & 157-019 O-RING} NOTE:

04

ID0015833

64

65

66

67

68

NOTES:

ID0134963

69

BOOMS DIGGING CHAINS AUGER PARTS RESTRAINT BARS TRENCH CLEANERS ID0134855

70

71

72

BOOM TUBE

5 2

1

4

3,6

04

ID0093140

73

BOOM TUBE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

QTY

100-736 100-737 105-065 AR 105-110 AR 140-1128 1 140-1129 1 140-1130 1 140-1131 1 143-023 1 143-024 1 143-025 1 143-026 1 143-035 1 143-036 AR 140-1176 1 140-1177 1 140-1178 1 140-1179 1

DESCRIPTION

SHORT TOP BAR KIT LONG TOP BAR KIT LOCKNUT (1/2-NC) BOLT (1/2-NC X 4-1/2") BOOM TUBE (51") BOOM TUBE (63.3") BOOM TUBE (75.5") BOOM TUBE (101.1") BOOM TUBE (52") BOOM TUBE (64.3") BOOM TUBE (76.5") BOOM TUBE (101.1") TOP WEAR BAR (SHORT) TOP WEAR BAR (LONG) HD BOOM TUBE (51") HD BOOM TUBE (63.3") HD BOOM TUBE (75.5") HD BOOM TUBE (101.1")

REMARKS

INCL REF NO.'S 1,2 & 4 INCL REF NO.'S 1,2 & 5 (4) PER 11.1" WEAR BAR,(6) PER 23.4" WEAR BAR (4) PER 11.1" WEAR BAR,(6) PER 23.4" WEAR BAR SEE FOOTNOTE 3, 62P/3P OR 96P/2P CHAINS SEE FOOTNOTE 3, 70P/3P OR 108P/2P CHAINS SEE FOOTNOTE 3, 78P/3P OR 120P/2P CHAINS SEE FOOTNOTE 3, 94P/3P OR 144P/2P CHAINS SEE FOOTNOTE 4, 62P/3P OR 96P/2P CHAINS SEE FOOTNOTE 4, 70P/3P OR 108P/2P CHAINS SEE FOOTNOTE 4, 78P/3P OR 120P/2P CHAINS SEE FOOTNOTE 4, 94P/3P OR 144P/2P CHAINS SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3, 62P/3P OR 96P/2P CHAINS SEE FOOTNOTE 3, 70P/3P OR 108P/2P CHAINS SEE FOOTNOTE 3, 78P/3P OR 120P/2P CHAINS SEE FOOTNOTE 3, 94P/3P OR 144P/2P CHAINS

NOT SHOWN:

FOOTNOTES:

1. FOR 70P/3P OR 108P/2P NON-WEAR BAR BOOM ARRANGEMENTS. 2. ONE (1) FOR 78P/3P OR 120P/2P NON-WEAR BAR BOOM ARRANGEMENTS, TWO (2) FOR 94P/3P OR 144/2P NON-WEAR BAR BOOM ARRANGEMENTS. 3. FOR PIVOTS WITH 5" ALIGNMENT PIN HOLE CENTERS, OR MODIFIED 8.5" PIN HOLE CENTER PIVOTS. 4. FOR PIVOTS WITH 8.5" ALIGNMENT PIN HOLE CENTERS.

NOTE:

04

ID0093140

74

PERSONNEL RESTRAINT

8

1 4

2

6

8

5 3

7 1 02

ID0139703

75

PERSONNEL RESTRAINT REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7 .

8.

QTY

100-735 105-340 10 105-473 8 105-499 4 141-12 18 1 141-1219 1 141-1220 1 141-264 1 141-265 1 141-266 1 141-267 1 143-009 1 143-011 1 143-010 1 143-012 1 143-02 2 1 105-953 2

DESCRIPTION

REMARKS

BOOM FIT-UP KIT FLG LOCKNUT (3/4-NC) BOLT (3/4-NC X 5") BOLT (3/4-NC X 1-3/4") RESTRAINT BAR-62 P COMBO RESTRAINT BAR-70P COMBO RESTRAINT BAR-78 P COMBO PERSONNEL RESTRAINT BAR (52") PERSONNEL RESTRAINT BAR (64.3") PERSONNEL RESTRAINT BAR (76.55") PERSONNEL RESTRAINT BAR (101.1") LEFT AUGER BRACKET (12") LEFT AUGER BRACKET (24") RIGHT AUGER BRACKET (12") RIGHT AUGER BRACKET (24") ROCK GUARD LOCKNUT (3/4-NC)

INCL. REF. NO.'S 1-3, 7 & 8

FOR 62P/3P OR 96P/2P CHAINS - H752/H952 & H1052 FOR 70P/3P OR 96P/2P CHAINS - H752/H952 & H1052 FOR 78P/3P OR 120P/2P CHAINS - H752/H952 & H1052 FOR 62P/3P OR 96P/2P CHAINS FOR 70P/3P OR 96P/2P CHAINS FOR 78P/3P OR 120P/2P CHAINS FOR 94P/3P OR 144P/2P CHAINS

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0139703

76

GREASE CYLINDER BRACKET WEAR BAR BOOMS

8

1 6

5 7

4 3 11 10

12 2

BOOM TUBE

9 4 3

04

ID0093135

77

GREASE CYLINDER BRACKET WEAR BAR BOOMS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

105-340 105-473 105-829 105-884 143-001 143-002 150-749 150-748 183-641 183-642 184-089 159-093 115-019

QTY

5 5 4 4 1 1 1 1 1 1 5 1 5

DESCRIPTION

FLG LOCKNUT (3/4-NC) BOLT (3/4-NC X 5") FLG LOCK BOLT (1/2-NC X 1") WASHER (.531") LEFT GREASE CYL PLATE RIGHT GREASE CYL PLATE GREASE CYL (2.5" X 2.5" X 7")(HD) GREASE CYL (2"X1.5"X7")(STD) ROD PIN BARREL PIN BOOM CROSSBOLE WASHER (.781") RELIEF VALVE (5/8-NF, 02N) ZERK (02N)

REMARKS

USE LOCTITE 609 USE LOCTITE 609

SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 2 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. WEAR BAR BOOM PARTS ASSEMBLIES CONTAIN ALL PARTS ON THIS PAGE EXCEPT THE GREASE CYLINDER, WHICH MUST BE ORDERED SEPARATELY. REFER TO PARTS PAGE TITLED "GREASE CYLINDER".

2. RELIEF VALVE 159-093 AND ZERK 115-019 ARE INCLUDED WITH CYLINDERS 150-748 AND 150-749, AND ARE SHOWN HERE FOR REFERENCE AS SERVICE PARTS IF NEEDING TO ORDER SEPARATELY.

NOTE:

04

ID0093135

78

GREASE CYLINDER BRACKET NON-WEAR BAR BOOMS

7

6 5

4 10

1

3 11

9 2 BOOM TUBE

8 4 3

04

ID0093136

79

GREASE CYLINDER BRACKET NON-WEAR BAR BOOMS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

105-340 105-473 105-829 105-884 143-006 150-749 150-748 7. 183-641 8. 183-642 9. 184-089 8. 183-642 9. 184-089 10. 159-093 11. 115-019

QTY

DESCRIPTION

5 5 4 4 1 1 1 1 1 5 1 5 1 5

FLG LOCKNUT (3/4-NC) BOLT (3/4-NC X 5") FLG LOCK BOLT (1/2-NC X 1") WASHER (1/2") MOUNT BRACKET GREASE CYL (2.5" X 2.5" X 7") GREASE CYL (2" X 1.5" X 7") ROD PIN BARREL PIN WASHER (.781") BARREL PIN WASHER (.781") RELIEF VALVE (5/8-NF, 02N) ZERK (02N)

REMARKS

USE LOCTITE 609 USE LOCTITE 609

SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 2 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. NON-WEAR BAR BOOM PARTS ASSEMBLIES CONTAIN ALL PARTS ON THIS PAGE EXCEPT THE GREASE CYLINDER, WHICH MUST BE ORDERED SEPARATELY. REFER TO PARTS PAGE TITLED "GREASE CYLINDERS".

2. RELIEF VALVE 159-093 AND ZERK 115-019 ARE INCLUDED WITH CYLINDERS 150-748 AND 150-749, AND ARE SHOWN HERE FOR REFERENCE AS SERVICE PARTS IF NEEDING TO ORDER SEPARATELY.

NOTE:

04

ID0093136

80

81

82

83

84

85

86

ROLLER (19" OD)

1

2 13 8

3 5 9

10

7

11

4 5

6 4

11 9 12

6 8 13

06

ID0129294

87

ROLLER (19" OD) REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

190-183 105-377 115-001 115-003 115-152 115-470 125-216 125-265 142-757 145-589 155-852 181-697 181-699 166-437 184-067

QTY

1 1 1 1 2 2 2 1 2 2 1 2 1 2

DESCRIPTION

REMARKS

BEARING/SEAL REPAIR KIT JAM NUT (1-1/2-NF) ZERK (02N) ZERK (1/4-NF, STR) PLUG (12N, SQ FM) INTERNAL SNAP RING (3.250") TAPERED RACE (3.265") TAPERED BEARING (1.5") LT ROLLER (3.067"P, 19") SPACER EXTERNAL SEAL (2.250") BEARING SPACER SEAL SLEEVE TAIL SHAFT SEAL SPACER

INCL REF NO.'S 4-6, 8-11 & 13 NON-SELF TAPPING SELF TAPPING

INCL REF NO.'S 2 & 3 ENDS WITH S/N

NOT SHOWN:

FOOTNOTES:

NOTE:

06

ID0129294

88

HD ROLLER 19"

2 3

8

10

9 6 5 7

4 4

9

6 FACTORY MATCHED BEARING ASSEMBLY (SEE FOOTNOTE 1)

BEARING

SPACER 8

7 11

10

1 11

1

7 10

RACE

07

6 9

SNAP RINGS

ID0113864

89

HD ROLLER 19" REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

1 1 1 1 1 2 2 1 2 2 1

141-626 115-003 115-152 125-546 129-013 157-308 141-629 141-625 141-627 157-309 107-920

DESCRIPTION

TAIL SHAFT NUT ZERK (1/4-NF, STR) PLUG (12N, SQ FM) BEARING ASSEMBLY LT ROLLER (3.067"P, 19.0") EXTERNAL SEAL (3.875") SEAL SLEEVE BOOM TAIL SHAFT SEAL SPACER V-RING SEAL BOLT (5/16-NC X 3/8 ", SOC)

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 4

NOT SHOWN:

FOOTNOTES:

1. REF. NO. 4 (BEARING ASSEMBLY) IS FACTORY MATCHED, DO NOT MIX CUPS, SONES, SPACERS, ETC. ASS'Y INCLUDES: 2X INT. SNAP RING, 2X TAP RACE, 2X TAP BEARING & BEARING SPACER 2. CHECK SURFACE OF SEAL BEFORE INSERTING SO PROPER SIDE FACES OUTSIDE 3. WIDER SIDE OF SEAL MUST BE INSTALLED FACING INSIDE 4. AFTER SETTING THE PRE-LOAD OF THE BEARING, REF. #11 (107-920) SHOULD FIT IN ONE OF THREE HOLES IN THE BOOM SIDE PLATE TO KEEP THE TAILSHAFT NUT FROM LOOSENING. NOTE:

07

ID0113864

90

SMALL TAIL SPROCKET BOOM

4

2 6 5

3

1

01

ID0139704

91

SMALL TAIL SPROCKET BOOM REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

1 5 5 1 5 5

140-543 140-544 105-319 105-340 105-473 143-043 184-089 184-090

BOOM (2P) BOOM (3P) BOLT (3/4-NC X 1-1/2") FLG LOCKNUT (3/4-NC) BOLT (3/4-NC X 5") BOOM WASHER (.781") BOOM CROSS TUBE DESCRIPTION

REMARKS

INCL REF NO.'S 1 THRU 6; SEE FOOTNOTE 1 INCL REF NO.'S 1 THRU 6; SEE FOOTNOTE 1 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. BOOM ALSO CONTAINS APPROPRIATE SPROCKET AND HARDWARE; REFER TO PAGE TITLED "SPROCKET, 2" AND 3" PITCH". THIS BOOM MAY BE USED WITH A VARIETY OF CHAIN LENGTHS BY USING OPTIONAL BOOM TUBES; REFER TO PAGE TITLED "BOOM TUBE" 2. BOLT IS USED WITH BOTTOM TUBES DESIGNED FOR 3.067" PITCH CHAINS 70 PITCH AND LONGER. THE BOLT SCREWS INTO THE BOTTOM SURFACE OF THE BOOM TUBE AND ACTS AS A CYLINDER STOP AND BOOM MAIN FRAME SAFETY LUG.

NOTE:

01

ID0139704

92

93

94

GREASE CYLINDERS 7 3

5

8

4

6 1

7

2

8 10

11

13

12

9

05

ID0129299

95

GREASE CYLINDERS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

151-052 151-051 190-178 152-002 157-078 155-712 150-433 115-024 115-019 115-012 155-016 150-627 152-001 157-560 157-561 157-562

QTY

1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

GREASE CYL (2" X 1.5" X 7") GREASE CYL (2.5" X 2.5" X 7") SEAL REPAIR KIT (2.5" X 2.5") CYLINDER BARREL (2.0") O-RING (222 D70) BACKUP RING (222 D90) CYLINDER ROD (1.5") ZERK (02N, 5000PSI) ZERK (02N) ZERK (04N) RELIEF PLUG (04S) CYLINDER ROD (2.5") CYLINDER BARREL(2.5") PISTON SEAL (1.975") ROD WIPER (2.492") RETAINER RING (2.625")

REMARKS

INCL REF NO.'S 3 THRU 8, SEE FOOTNOTE 1 INCL REF NO.'S 7 THRU 13, SEE FOOTNOTE 1 INCL REF NO.'S 11 THRU 13

EARLY STYLE STANDARD CYLINDER EARLY STYLE HEAVY DUTY CYLINDER

NOT SHOWN:

FOOTNOTES:

1. CYLINDER 151-051 HAS BEEN SUPERSEEDED BY 150-749 AND CYLINDER 151-052 HAS BEEN SUPERSEEDED BY 150-748. SEE PARTS PAGES 807-617 FOR A VIEW OF COMPONENTS BELONGING TO 150-748 AND 150-749

NOTE:

05

ID0129299

96

70K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

4 1

3 2

6

7

8

9

5

REPAIR Part# 133-726 138-704 1 138-702 0 138-703 0 138-701 0 139-704 0 139-701 0 139-702 0 135-1242 16 135-1239 15 105-499 62 105-953 62 135-979 0 136-070 0 105-383 0 105-466 0 135-921 0

02

133-728 1 0 0 0 0 0 0 16 15 30 62 32 48 32 0 0

133-787 0 1 1 0 0 0 0 17 17 68 68 0 0 0 0 0

CHAIN ASSEMBLIES 133-790 133-746 134-726 0 1 0 1 1 0 1 0 0 1 0 0 0 0 1 0 0 0 0 0 0 19 20 16 19 19 15 76 78 62 76 78 62 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

134-736 0 0 0 0 1 1 0 18 17 70 70 0 0 0 0 0

134-747 0 0 0 0 1 0 1 20 19 38 78 0 0 0 40 40

134-756 0 0 0 0 1 0 2 24 23 94 94 0 0 0 0 0

ID0449257

97

70K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9

1 1 1 1 1 1 1 1 1

134-726 134-736 134-747 134-756 133-726 133-728 133-787 133-790 133-746

DESCRIPTION

REMARKS

P70K 2P DURA 62P 6.6 P70K 2P DURA 70P 6.8 P70K 2P DURA 78P 8.1 P70K 2P DURA 94P 6.62 70K 2P DURA 62P 6.6 70K 2P DURA 62P 9.62 70K 2P DURA 68P 6.6 70K 2P DURA 76P 6.6 70K 2P DURA 78P 6.8"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

FOOTNOTES:

NOTE:

1. 70K STANDARD REPAIR STATION KIT 135-1182, 70K PREMIUM REPAIR STATION KIT 135-1187, 70K MASTER PIN 135-501, & 70K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0449257

98

70K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

4 1

5

2 3

6

REPAIR Part# 138-704 138-701 138-702 138-703 139-704 139-701 139-702 135-973 135-974 135-975 135-976 135-979 135-980 105-322 105-365 105-391 105-953

01

135-776 1 0 0 0 0 0 0 7 7 12 12 38 24 14 24 24 62

135-777 1 1 0 0 0 0 0 7 7 14 14 42 28 14 28 28 70

135-789 0 1 1 1 0 0 0 8 8 15 15 48 28 16 28 32 76

CHAIN ASSEMBLIES 135-778 135-779 137-776 1 1 0 0 0 0 1 2 0 0 0 0 0 0 1 0 0 0 0 0 0 9 10 7 9 10 7 15 18 12 15 19 12 46 56 38 32 38 24 18 20 14 32 38 24 28 36 24 78 94 62

7

137-777 0 0 0 0 1 1 0 7 7 14 14 42 28 14 28 28 70

8

137-778 0 0 0 0 1 0 1 9 9 15 15 46 32 18 32 28 78

ID0449274

99

70K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-776 135-777 135-789 135-778 135-779 137-776 137-777 137-778

DESCRIPTION

REMARKS

70K 2P ALG 62P 6.8 70K 2P ALG 70P 6.8 70K 2P ALG 76P 6.4" 70K 2P ALG 78P 6.8 70K 2P ALG 94P 6.8 P70K 2P ALG 62P 6.8 P70K 2P ALG 70P 6.8 P70K 2P ALG 78P 6.8

SEE F/N 1 SEE F/N1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-704 70K DIGGING CHAIN STD 2P (62P) 138-701 70K DIGGING CHAIN STD 2P (8P) 138-702 70K DIGGING CHAIN STD 2P (16P) 138-703 70K DIGGING CHAIN STD 2P (52P) 139-704 70K DIGGING CHAIN PREMIUM 2P (62P) 139-701 70K DIGGING CHAIN PREMIUM 2P (8P) 139-702 70K DIGGING CHAIN PREMIUM 2P (16P) 135-973 LEFT OUTSIDE BIT ADAPTER 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-975 LEFT INSIDE BIT ADAPTER 135-976 E.S. BIT ADPTR. RT. INSIDE 135-979 CHAIN SPACER, 70K 135-980 CHAIN SPACER (1.405") 105-322 BOLT (3/4-NC X 4.5") 105-365 BOLT (3/4-NC X 4") 105-391 BOLT (3/4-NC X 4.5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

1. USE INSERT BIT 136-101

NOTE:

1. 70K STANDARD REPAIR STATION KIT 135-1182, 70K PREMIUM REPAIR STATION KIT 135-1187, 70K MASTER PIN 135-501, & 70K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449274

100

110K DURATOOTH CHAINS (62P&70P) 2P CHAIN ASSEMBLIES GROUP 1

1

REPAIR Part# 133-420 138-411 1 135-1534 0 135-1239 15 135-1242 16 105-499 62 105-953 62 105-372 0 105-466 0 135-921 0 136-120 0 105-321 0 105-365 0 136-070 0 105-383 0 136-121 0

01

2

133-421 1 0 15 16 30 0 62 32 32 0 0 0 0 0 0

3

133-423 1 0 19 20 30 0 78 0 24 8 16 32 0 0 0

4

6

5

CHAIN ASSEMBLIES 133-459 133-460 133-461 0 0 0 1 1 1 17 17 18 18 18 17 70 34 34 70 70 70 0 0 0 0 36 0 0 36 0 0 0 0 0 0 0 0 0 0 0 0 54 0 0 36 0 0 0

133-462 0 1 22 22 32 88 0 0 30 9 20 36 0 0 0

7

8

133-463 0 1 23 24 94 126 0 0 24 4 16 16 0 0 4

ID0441443

101

110K DURATOOTH CHAINS (62P&70P) 2P CHAIN ASSEMBLIES GROUP 1 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

133-420 133-421 133-423 133-459 133-460 133-461 133-462 133-463

DESCRIPTION

REMARKS

110K 2P DURA 62P 7.0" 110K 2P DURA 62P 8.5" 110K 2P DURA 62P 12 110K 2P DURA 70P 7.0 110K 2P DURA 70P 8.5 110K 2P DURA 70P 10 110K 2P DURA 70P 12 110K 2P DURA 70P 15

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 135-1534 110K DIGGING CHAIN STD 2P (70P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 105-372 LOCKNUT (3/4-NC) 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 135-921 TOOTH SPACER 136-120 12" TOOTH ADAPTER 105-321 BOLT (3/4-NC X 3") 105-365 BOLT (3/4-NC X 4") 136-070 SPACER 105-383 BOLT (3/4-NC X 6", GD8) 136-121 BOLT (3/4-NC X 3")

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0441443

102

110K DURATOOTH CHAINS (78P & 94P) 2P CHAIN ASSEMBLIES GROUP 2

1

REPAIR Part# 133-430 135-1535 1 138-411 0 138-410 0 135-1239 19 135-1242 20 105-499 78 105-953 78 135-921 0 105-466 0 136-120 0 105-321 0 105-365 0 136-121 0

01

133-431 1 0 0 19 20 38 78 40 40 0 0 0 0

2

3

4

CHAIN ASSEMBLIES 133-433 133-434 133-440 1 1 0 0 0 1 0 0 2 24 26 23 25 26 24 38 104 94 98 140 94 30 30 0 0 0 0 10 4 0 20 20 0 40 16 0 0 9 0

5

6

133-441 0 1 2 23 24 46 94 48 48 0 0 0 0

ID0441478

103

110K DURATOOTH CHAINS (78P & 94P) 2P CHAIN ASSEMBLIES GROUP 2 REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

133-430 133-431 133-433 133-434 133-440 133-441

DESCRIPTION

REMARKS

110K 2P DURA 78P 7.0" 110K 2P DURA 78P 8.5" 110K 2P DURA 78P 12" 110K 2P DURA 78P 15" 110K 2P DURA 94P 7.0 110K 2P DURA 94P 8.5

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1535 110K DIGGING CHAIN STD 2P (78P) 138-411 110K DIGGING CHAIN STD 2P (62P) 138-410 110K DIGGING CHAIN STD 2P (16P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 135-921 TOOTH SPACER 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 136-120 12" TOOTH ADAPTER 105-321 BOLT (3/4-NC X 3") 105-365 BOLT (3/4-NC X 4") 136-121 BOLT (3/4-NC X 3")

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0441478

104

110K COMBO CHAINS 2P CHAIN ASSEMBLIES

1

2

REPAIR Part# 131-264 138-411 1 135-1534 0 135-1535 0 135-1239 6 135-1242 6 136-276 6 136-275 7 136-274 3 136-273 3 135-975 0 135-976 0 135-974 0 135-973 0 135-978 14 135-977 48 105-365 14 105-391 24 105-473 24 105-953 62

01

3

4

5

6

CHAIN ASSEMBLLIES: 131-266 131-268 131-269 131-270 0 0 1 0 1 0 0 1 0 1 0 0 7 7 6 7 6 8 6 6 7 8 0 0 7 8 0 0 4 4 0 0 4 4 0 0 0 0 7 7 0 0 6 7 0 0 3 4 0 0 3 4 16 16 14 16 54 62 48 54 16 16 14 16 26 30 24 26 28 32 24 28 70 78 62 70

131-271 0 0 1 7 8 0 0 0 0 8 8 4 4 16 62 16 30 32 78

ID0449237

105

110K COMBO CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

131-264 131-266 131-268 131-269 131-270 131-271

DESCRIPTION

REMARKS

110K 2P CMB DURA/SHK B 62P 6.0 110K 2P CMB DURA/SHK 70P 6.0" 110K 2P CMB DURA/SHK 78P 6.0" 110K 2P CMB DURA/ALG 62P 6.0" 110K 2P CMB DURA/ALG 70P 6.0" 110K 2P ALG B-O CMB 78P 6.0

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 135-1534 110K DIGGING CHAIN STD 2P (70P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 136-276 70/110K RT INSIDE BOLT-ON SHARK ADAPTER 136-275 70/110K LEFT INSIDE BOLT-ON SHARK ADPTER 136-274 70/110K LFT OUTSIDE BOLT-ON SHARK ADPTER 136-273 70/110K RT OUTSIDE BOLT-ON SHARK ADAPTER 135-975 LEFT INSIDE BIT ADAPTER 135-976 E.S. BIT ADPTR. RT. INSIDE 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-973 LEFT OUTSIDE BIT ADAPTER 135-978 CHAIN SPACER (1.593") 135-977 CHAIN SPACER (2.343") 105-365 BOLT (3/4-NC X 4") 105-391 BOLT (3/4-NC X 4.5") 105-473 BOLT (3/4-NC X 5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449237

106

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3

1

4 3 2

6

7

5 REPAIR Part# 134-420 139-411 1 139-412 0 135-1239 15 135-1242 16 105-499 62 105-953 62 105-466 0 135-921 0 136-070 0 105-383 0 135-977 0 136-071 0 105-365 0 105-321 0

02

134-421 1 0 15 16 30 62 32 32 0 0 0 0 0 0

CHAIN ASSEMBLIES 134-422 134-423 134-459 1 1 1 0 0 1 15 19 17 16 20 18 30 30 70 62 78 70 0 0 0 0 24 0 48 32 0 32 0 0 32 0 0 0 8 0 0 32 0 0 16 0

134-460 1 1 18 17 34 70 36 36 0 0 0 0 0 0

134-461 1 1 18 17 34 70 0 0 54 36 36 0 0 0

ID0449310

107

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7

1 1 1 1 1 1 1

134-420 134-421 134-422 134-423 134-459 134-460 134-461

DESCRIPTION

REMARKS

P110K 2P DURA 62P 7.0 P110K 2P DURA 62P 8.5 P110K 2P DURA 62P 10" P110K 2P DURA 62P 12" P110K 2P DURA 70P 7.0 P110K 2P DURA 70P 8.5 P110K 2P DURA 70P 10

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0449310

108

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4

5 4

2

3

1

REPAIR Part# 134-462 139-411 1 139-410 0 139-412 1 135-1239 22 135-1242 22 105-499 32 105-466 0 105-953 88 105-321 20 105-365 36 135-921 30 136-070 36 136-071 9 136-088 0 105-383 0

01

CHAIN ASSEMBLIES 134-464 134-430 134-431 1 1 1 0 1 1 1 0 0 23 20 19 24 19 20 30 78 38 0 0 40 94 78 78 16 0 0 16 0 0 24 0 40 32 0 0 4 0 0 8 0 0 32 0 0

134-433 1 1 0 24 25 38 0 98 20 40 30 40 10 0 0

ID0449331

109

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4 REF PART NO. NUMBER

QTY

1 2 3 4 5

1 1 1 1 1

134-462 134-464 134-430 134-431 134-433

DESCRIPTION

REMARKS

P110K 2P DURA 70P 11 P110K 2P DURA 70P 15" P110K 2P DURA 78P 7.0 P110K 2P DURA 78P 8.5 P110K 2P DURA 78P 12

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

139-411 110K DIGGING CHAIN PREMIUM 2P (62P) 139-410 110K DIGGING CHAIN PREMIUM 2P (16P) 139-412 110K DIGGING CHAIN PREMIUM 2P (8P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 105-953 LOCKNUT (3/4-NC) 105-321 BOLT (3/4-NC X 3") 105-365 BOLT (3/4-NC X 4") 135-921 TOOTH SPACER 136-070 SPACER 136-071 10" - 12"" TOOTH ADAPTER 136-088 "14" - 16" TOOTH ADAPTER" 105-383 BOLT (3/4-NC X 6", GD8)

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449331

110

110K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

2

3

4

1

5

6

7 8

REPAIR Part# 135-485 138-411 1 139-411 0 139-412 0 139-410 0 138-410 0 135-1534 0 135-1535 0 135-976 12 135-975 12 135-974 7 135-973 7 135-978 24 135-977 38 105-365 24 105-473 24 105-322 14 105-953 62

01

135-486 0 0 0 0 0 1 0 14 14 7 7 28 42 28 28 14 70

135-487 0 0 0 0 0 0 1 15 15 9 9 32 46 32 28 18 78

CHAIN ASSEMBLIES 135-488 137-485 137-486 1 0 0 0 1 1 0 0 1 0 0 0 2 0 0 0 0 0 0 0 0 18 12 14 19 12 14 10 7 7 10 7 7 38 24 28 56 38 42 38 24 28 36 24 28 20 14 14 94 62 70

137-487 0 1 0 1 0 0 0 15 15 9 9 32 46 32 28 18 77

137-488 0 1 0 2 0 0 0 19 18 10 10 38 56 38 36 20 94

ID0449362

111

110K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-485 135-486 135-487 135-488 137-485 137-486 137-487 137-488

DESCRIPTION

REMARKS

110K 2P ALG 62P 6.7 110K 2P ALG 70P 6.6" 110K 2P ALG 78P 6.6" 110K 2P ALG 94P 6.8 P110K 2P ALG 62P 6.8 P110K 2P ALG 70P 6.8 P110K 2P ALG 78P 6.8 P110K 2P ALG 94P 6.8

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 139-411 110K DIGGING CHAIN PREMIUM 2P (62P) 139-412 110K DIGGING CHAIN PREMIUM 2P (8P) 139-410 110K DIGGING CHAIN PREMIUM 2P (16P) 138-410 110K DIGGING CHAIN STD 2P (16P) 135-1534 110K DIGGING CHAIN STD 2P (70P) 135-1535 110K DIGGING CHAIN STD 2P (78P) 135-976 E.S. BIT ADPTR. RT. INSIDE 135-975 LEFT INSIDE BIT ADAPTER 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-973 LEFT OUTSIDE BIT ADAPTER 135-978 CHAIN SPACER (1.593") 135-977 CHAIN SPACER (2.343") 105-365 BOLT (3/4-NC X 4") 105-473 BOLT (3/4-NC X 5") 105-322 BOLT (3/4-NC X 4.5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449362

112

113

114

115

116

NOTES:

ID0134963

117

ACCESSORIES

118

PLOW BLADES

RT115 QUAD TRACK - H1032, H1052 BEGINS WITH S/N: CMWH1032TB0000136 & CMWH1052CB0000004

7 4 8

5

6 6

12

7 5

11

13 12 10 5

9

12 10 11

14 15

6

7 1

2 3

06

ID0274821

119

PLOW BLADES

RT115 QUAD TRACK - H1032, H1052 BEGINS WITH S/N: CMWH1032TB0000136 & CMWH1052CB0000004 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

185-345 185-1081 185-281 179-738 105-446 106-067 105-514 179-961 178-347 105-423 105-379 178-345 185-1100 301-1580 185-351

QTY

1 1 1 2 6 6 6 2 1 2 2 6 1 1 1

DESCRIPTION

BULLET BLADE (1" X 3" X 24") FEED BLADE QT(28/32/36 X 2 X 10R) FEED BLADE (28/32/36 X 1.5 X 7.5R) PLOW BLADE PIN WASHER (1-1/2") CASTLE NUT (1-1/2-NF) COTTER PIN (.250 X 3.000) PLOW PIN SPACER PIN (2.00" X 5.50") WASHER (3/4") LK BOLT (3/4-NC X 1-1/4", NLK) TENSION BUSHING (2.375) PLOW BLADE PIN WING BOLT (1/2-NX X 3") CABLE GUIDE (1.5 X 7.5R X 36)

REMARKS

RECOMMENDED FOR QUAD TRACK, INCLUDES REF NO.'S 14 & 15 USE REPLACEMENT GUIDE 185-351 SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 1 & 2 SEE NOT SHOWN FOR OTHER LENGTHS.

NOT SHOWN:

191-401 190-1781 WING BOLTS: 106-072 185-1070 301-2277

KIT, LOWER BOSS MODIFIED VERTICAL PLOW BLADE MOUNT KIT

SEE FOOTNOTE 1 SEE FOOTNOTE 2

WING BOLT (1/2-NC X 1-1/4") WING BOLT (1/2-13 UNC X 1.50") WING BOLT (1/2-NC X 2 1/2")

BULLET BLADES: 185-346 185-356 185-357 185-345

1" X 3" X 30" 1" X 3" X 22"/26"/30" 1" X 3" X 28"/32"/36" 1" X 3" X 24"

FEED BLADES: 185-334 185-333 185-335 185-329 185-332 185-306 185-305 185-310 185-311 185-315 185-316 185-1091 185-283 185-284 185-285 185-1103 185-1110

FEED BLADE ASS'Y (1 X 7.38 X 30) FEED BLADE ASS'Y (1.5 X 6.63 X 30) FEED BLADE ASS'Y (1.5 X 6.63 X 36) FEED BLADE ASS'Y (2 X 6.63 X 36) FEED BLADE ASS'Y (2 X 10 X 30) FEED BLADE (22/26/30 X 1 X 9R) FEED BLADE (22/26/30 X 1 X 9R) FEED BLADE (22/26/30 X 1.5 X 9R) FEED BLADE (22/26/30 X 1.5 X 9R) FEED BLADE (22/26/30 X 2 X 10R) FEED BLADE (22/26/30 X 2 X 10R) FEED BLADE QT (28/32/36 X 1.5 X 7.5R) FEED BLADE (28/32/36 X 1.5 X 7.5R) FEED BLADE (28/32/36 X 2 X 10R) FEED BLADE (28/32/36 X 2 X10R) FEED BLADE QT (34/38/42 X 1.5 X 7.5R) FEED BLADE QT (34/38/42 X 2.0 X 10R)

USE REPLACEMENT GUIDE 186-614 USE REPLACEMENT GUIDE 186-639 USE REPLACEMENT GUIDE 185-228 USE REPLACEMENT GUIDE 185-216 USE REPLACEMENT GUIDE 186-790 USE REPLACEMENT GUIDE 185-353 NO TOE, USE REPLACEMENT GUIDE 185-353 USE REPLACEMENT GUIDE 185-354 NO TOE, USE REPLACEMENT GUIDE 185-354 USE REPLACEMENT GUIDE 185-355 NO TOE, USE REPLACEMENT GUIDE 185-355 USE REPLACEMENT GUIDE 185-351 , RECOMMENDED FOR QUAD TRACK NO TOE, USE REPLACEMENT GUIDE 185-351 USE REPLACEMENT GUIDE 185-352 NO TOE, USE REPLACEMENT GUIDE 185-352 USE REPLACEMENT GUIDE 185-1117 , RECOMMENDED FOR QUAD TRACK USE REPLACEMENT GUIDE 185-1118 , RECOMMENDED FOR QUAD TRACK

FOOTNOTES:

1. KIT #191-401 INCLUDES REF NO.'S: 5-8 & 12. KIT IS REQUIRED WHEN USING THE VERTICAL BLADE AND CONTAINS COMPONENTS TO CROSS TIE THE FIRST TWO HORIZONTAL PIN BOSS HOLES. THIS KIT MUST BE USED AT ALL TIMES, EVEN IF A PLOW BLADE IS NOT ATTACHED TO FRONT HOLES. 2. KIT #190-1781 INCLUDES REF NO.'S: 5, 6, 7 & 9-12. KIT IS REQUIRED WHEN MOUNTING A VERTICAL BLADE. KIT 191-401 SHOULD ALSO BE USED. NOTE:

06

ID0274821

120

PLOW BLADES

RT115 QUAD TRACK - H1032, H1052 ENDS WITH S/N_________________.

7 5 4

6

12 8

8

12

11 10 9

5 12

10 11

7 6

1

2 3

07

ID0254280

121

PLOW BLADES

RT115 QUAD TRACK - H1032, H1052 ENDS WITH S/N_________________.

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12

185-345 185-1081 185-281 179-738 105-446 106-067 105-514 179-961 178-347 105-423 105-379 178-345

QTY

1 1 1 3 6 6 6 2 1 2 2 6

DESCRIPTION

BULLET BLADE (1" X 3" X 24") FEED BLADE QT(28/32/36 X 2 X 10R) FEED BLADE (28/32/36 X 1.5 X 7.5R) PLOW BLADE PIN WASHER (1-1/2") CASTLE NUT (1-1/2-NF) COTTER PIN (.250 X 3.000) PLOW PIN SPACER PIN (2.00" X 5.50") WASHER (3/4") LK BOLT (3/4-NC X 1-1/4", NLK) TENSION BUSHING (2.375)

REMARKS

RECOMMENDED FOR QUAD TRACK SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 1 & 2

NOT SHOWN:

191-401 191-1508 CABLE GUIDE: 185-351

KIT, LOWER BOSS VERTICAL PLOW BLADE MOUNT KIT

SEE FOOTNOTE 1 SEE FOOTNOTE 2

1.5" X 7" X 36"

BULLET BLADES: 185-346 185-356 185-357 185-345

1" X 3" X 30" 1" X 3" X 22"/26"/30" 1" X 3" X 28"/32"/36" 1" X 3" X 24"

FEED BLADES: 185-334 185-333 185-335 185-329 185-332 185-306 185-305 185-310 185-311 185-315 185-316 185-1091 185-283 185-284 185-285 185-1103 185-1110

FEED BLADE ASS'Y (1 X 7.38 X 30) FEED BLADE ASS'Y (1.5 X 6.63 X 30) FEED BLADE ASS'Y (1.5 X 6.63 X 36) FEED BLADE ASS'Y (2 X 6.63 X 36) FEED BLADE ASS'Y (2 X 10 X 30) FEED BLADE (22/26/30 X 1 X 9R) FEED BLADE (22/26/30 X 1 X 9R) FEED BLADE (22/26/30 X 1.5 X 9R) FEED BLADE (22/26/30 X 1.5 X 9R) FEED BLADE (22/26/30 X 2 X 10R) FEED BLADE (22/26/30 X 2 X 10R) FEED BLADE QT (28/32/36 X 1.5 X 7.5R) FEED BLADE (28/32/36 X 1.5 X 7.5R) FEED BLADE (28/32/36 X 2 X 10R) FEED BLADE (28/32/36 X 2 X10R) FEED BLADE QT (34/38/42 X 1.5 X 7.5R) FEED BLADE QT (34/38/42 X 2.0 X 10R)

USE REPLACEMENT GUIDE 186-614 USE REPLACEMENT GUIDE 186-639 USE REPLACEMENT GUIDE 185-228 USE REPLACEMENT GUIDE 185-216 USE REPLACEMENT GUIDE 186-790 USE REPLACEMENT GUIDE 185-353 NO TOE, USE REPLACEMENT GUIDE 185-353 USE REPLACEMENT GUIDE 185-354 NO TOE, USE REPLACEMENT GUIDE 185-354 USE REPLACEMENT GUIDE 185-355 NO TOE, USE REPLACEMENT GUIDE 185-355 USE REPLACEMENT GUIDE 185-351 , RECOMMENDED FOR QUAD TRACK NO TOE, USE REPLACEMENT GUIDE 185-351 USE REPLACEMENT GUIDE 185-352 NO TOE, USE REPLACEMENT GUIDE 185-352 USE REPLACEMENT GUIDE 185-1117 , RECOMMENDED FOR QUAD TRACK USE REPLACEMENT GUIDE 185-1118 , RECOMMENDED FOR QUAD TRACK

FOOTNOTES:

1. KIT #191-401 INCLUDES REF NO.'S: 5-8 & 12. KIT IS REQUIRED WHEN USING THE VERTICAL BLADE AND CONTAINS COMPONENTS TO CROSS TIE THE FIRST TWO HORIZONTAL PIN BOSS HOLES. THIS KIT MUST BE USED AT ALL TIMES, EVEN IF A PLOW BLADE IS NOT ATTACHED TO FRONT HOLES. 2. KIT #191-1508 INCLUDES REF NO.'S: 5, 6, 7 & 9-12. KIT IS REQUIRED WHEN MOUNTING A VERTICAL BLADE. KIT 191-401 SHOULD ALSO BE USED.

NOTE:

07

ID0254280

122

CABLE GUIDE

H732, H752, H932, H952, H1032, H1052

9

10

11 12 2

1

4 7

6 5 3

8

08

ID0055286

123

CABLE GUIDE

H732, H752, H932, H952, H1032, H1052 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

QTY

DESCRIPTION

191-489 CABLE GUIDE KIT 318-884 1 CABLE GUIDE 185-541 1 CABLE GUIDE 184-453 7 SPACER TUBE 107-520 7 PIN (.375" X 3.75") 110-033 7 HAIR CLIP PIN (1/8" X 1/2") 117-207 7 SPRING 106-391 4 WASHER (M12) 106-333 4 SCREW (M12-1.75 X 40mm, 8.8) 106-354 4 FLANGE NUT (M12-1.75) 105-827 4 FLG LK BOLT (3/8-NC X 1-1/4") 105-874 4 FLG LK BOLT (3/8-NC X 1-1/2") 105-081 4 BOLT (3/8-NC X 3-1/4") 309-952 1 ROPS CABLE GUIDE 181-075 4 SLEEVE 105-814 4 FLG LOCKNUT (3/8-NC)

REMARKS

INCL. REF #'S 1-12 & SEE FOOTNOTE 2 OBSOLETE, SEE FOOTNOTE 2

OBSOLETE, SEE FOOTNOTE 1 FOR HT115 ONLY;

SEE FOOTNOTE 1

FOR HT115 ONLY;

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1- USE LOCTITE 242 OR EQUIVALENT. 2- KIT 191-182 HAS BEEN REPLACED BY KIT 191-489, REF #1.

CABLE GUIDE 185-541.

318-884 HAS BEEN REPLACED BY

NOTE:

08

ID0055286

124

PIPE PULLER .625" - 1.250"

1

2

3

02

ID0139361

125

PIPE PULLER .625" - 1.250" REF PART NO. NUMBER

QTY

1.

2.

3.

1 1 1

368-290 107-113 107-114

DESCRIPTION

PIPE PULLER (.625" TO 1.250") NUT (#12-24) EYE BOLT (#12-24 X 1-1/2")

REMARKS

INCLUDES REFERENCE NUMBERS 2 AND 3 INCLUDES REFERENCE NUMBER 2

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0139361

126

NOTES:

ID0134963

127

MISCELLANEOUS

ID0135063

128

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

129

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

130

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

131

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

132

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which is D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

133

134

H1052 COMBO ATTACHMENT Related Publications Component

Ass’y

P/N

Model: H1052 Parts Manual ............................................................................. ........... 053-2352 H1052 Operators Manual ...................................................................... ........... 053-2255 H1052 Repair Guide (Service Manual) ................................................. ................ N/A H1052 Supplementary Maint Guide - Trencher ..................................... ............ 050-633 H1052 Digging Chain Guide (6 Volumes) ............................................. ............ 050-700 H1052 Special Tools Guide .................................................................. ............ 052-901

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ............................... 190-051 O-ring Repair Kit - Field Service (46 different O-rings) ...................................... 190-052

01

ID0265142

135

ID0040564

136

ID0135281