Ditch Witch H1032 Parts Manual 053-2237 - PDF DOWNLOAD

H1032 Parts Manual

Issue 9

053-2237

1

H1032 Plow ISSUE NO. 09PL-05/22

For Replacement Copy Order P/N 053-2237

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works.

This manual contains information concerning the following models: H1032 Plow

Copyright 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2018, 2022 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Jet Trac, Roto Witch, Subsite, Fluid Miser,

Power Pipe, Super Witch, Pierce Arrow, Zahn, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY ______________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy July 2019

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse (including, but not limited to, rollover), abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 07

ID0134872

5

CONTENTS______________________ Decals

Accessories

Location....................................................... 8

Cable Guide ............................................... 66 Pipe Puller ................................................. 68 Plow Blades ..........................................62, 64

Plow Attachments Attachment Frame/Drawbar .................... 12 Drive Hose Clamp ...................................... 22 Plow Arm, Lower/Swing Post .................... 14 Plow Arm, Upper ....................................... 16 Stow Lock .................................................. 20 Vibrator Steering ....................................... 18

Miscellaneous Bolt/Nut Torque Chart .............................. 72 Optional Kits .............................................. 78 Related Publications ................................. 78 Replacement O-Ring Chart ....................... 77 Warranty Registration............................... 80

Assembly Drawings Hydraulic Control Levers ........................... 38 Skid Shoes/Sod Cutter............................... 36 Vibrator Housing ............................26, 28, 30 Vibrator Weights ..................................32, 34

Hydraulics Blade Steer ................................................ 42 Control Levers ........................................... 52 Control Valve............................................. 58 Cylinder – 4” x 2” x 15”................................. 54 Cylinders – 2.5” x 1.5”.................................. 56 Plow Lift..................................................... 44 Plow Swing ................................................ 46 Vibrator Drive.......................................48, 50

ID0257150

6

7

DECALS

8

DECAL LOCATION H1032 9

5

1

4 8 7 6 5

4

3 2

04

ID0255298

9

DECAL LOCATION H1032 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

270-4861 273-093 275-284 275-023 274-318 274-442 275-326 270-4844 270-6307 275-184 273-165

QTY

1 1 1 4 4 2 2 2 2 1

DESCRIPTION

H1032 SERVICE DECAL KIT PLOW CONTROL AMPLITUDE CHART DECAL OIL LEVEL DECAL TIE DOWN LOCATION LIFT LOCATION WARNING CRUSHING WEIGHT H1032 MODEL ID H1032 MODEL ID WARNING MOVING PARTS DIGGING ATTACH CONTROL VALVE

REMARKS

(OLD STYLE) (NEW STYLE)

FOOTNOTES

04

ID0255298

10

NOTES:

ID0134963

11

PLOW ATTACHMENTS

12

ATTACHMENT FRAME / DRAWBAR H1032

21

19

20 10

9 9 9

10

10

11

3 4

1

8 4

9 11 5

2

7 5 6

6 8 7

3 13 18 14 12 17

18 15

16

02

16 ID0251903

13

ATTACHMENT FRAME / DRAWBAR H1032

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

1 ATTACHMENT FRAME 1 VALVE COVER 3 FLG LK SCREW (M8-1.25 X 25MM) 3 CLIP NUT (M8-1.25) 2 SCREW (M16-2.00 X 65MM, 10.9) 2 WASHER (M16) 2 SPACER 2 FLG NUT (M16-2.00, 10.9) 32 WASHER (M20, HARDENED) 18 HEX NUT (M20-2.50, 10.9) ZP 16 SCREW (M20-2.50 X 60MM) 1 LOAD TRANSFER PLATE 4 BOLT (3/4-NC X 3-1/4", GD8) 4 WASHER (3/4", HARDENED) 4 FLG LOCKNUT (3/4-NC) 8 FLG BOLT (3/4-NC X 2", GD8) 1 SPACER PLATE 4 COMPOSITION BUSHING (1.75") 10 COUNTERWEIGHT 4 WASHER (M20) 2 SCREW (M20-2.50 X 300MM)

301-1082 316-823 106-381 106-551 106-666 106-392 184-840 106-355 106-399 106-374 106-474 301-0348 106-085 106-949 105-340 106-098 301-0349 125-773 375-080 106-393 106-624

DESCRIPTION

REMARKS

INCL'D IN SHIP KIT 190-1555 INCL'D IN SHIP KIT 190-1555 INCL'D IN SHIP KIT 190-1555 INCL'D IN SHIP KIT 190-1555 INCL'D IN SHIP KIT 190-1555 INCL'D IN SHIP KIT 190-1555 INCL'D IN SHIP KIT 190-1555 - USE LOCTITE 271 INCL'D IN SHIP KIT 190-1555 INCL'D IN SHIP KIT 190-1555 INCL'D IN SHIP KIT 190-1555 INCL'D IN SHIP KIT 190-1555 INCL'D IN SHIP KIT 190-1555 INCL'D IN SHIP KIT 190-1555

NOT SHOWN:

190-1555

SHIP KIT

FOOTNOTES:

NOTE:

02

ID0251903

14

LOWER PLOW ARM / SWING POST H1032

6

7

10 1

14 7

4

6

11

13

12

14

8 9 17

12

5

2

FOOTNOTE 1

4

6 7

8

10 11 7 6

16 15

13

18

8 5 5 8 3 19

05

ID0251616

15

LOWER PLOW ARM / SWING POST H1032

REF PART NO. NUMBER

QTY

1 301-0373 2 185-499 3 177-1064 4 107-010 5 125-486 6 106-471 7 105-416 8 149-967 9 178-782 10 178-698 11 310-926 12 105-318 13 106-345 14 125-421 15 110-270 16 305-256 17 105-894 18 106-628 19 105-1630

1 1 1 2 4 5 5 4 1 2 2 2 2 4 2 1 1 1 1

DESCRIPTION

SWING POST LOWER PLOW ARM PIN FLG LK SCREW (M12-1.75 X 30MM) COMPOSITION BUSHING (2.000") FLG SCREW (M16-2.00 X 30MM) WASHER (5/8") INTERNAL SEAL PIN (2.00" X 11.47") PIN (1.750" X 7.260") PIN CAP WASHER (7/8") SCREW (M20-2.50 X 50MM) CLEVITE BUSHING (1.750") BOLT-ON CLAMP (9/16", HALF) BACKUP SPACER LOCKNUT(M10-1.50,PRV TRQ,10.9) SCREW (M10-1.50 X 60MM) SHLD BLT (M16 X 15MM, M12-1.75)

REMARKS

USE LOCTITE 271

USE LOCTITE 271 USE AS REQUIRED

USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

1. REFER TO "BLADE STEER HYDRAULICS", ID0251755 FOR ASSEMBLY & COMPONENTS..

NOTE:

05

ID0251616

16

UPPER PLOW ARM H1032

5

4

23

6

1

28 19

26 5

3

3

11

19 4

8 12 15

6

24 18 27

5

13

5

25

26 19

12 14

16

5

25

17 7

2 7 22

10 9

21 20

21 22

18

19

5 8

06

ID0251617

17

UPPER PLOW ARM H1032

REF PART NO. NUMBER

QTY

1 185-966 2 325-776 3 116-667 4 105-743 5 105-071 6 106-709 7 116-348 8 105-828 9 152-083 10 125-844 11 183-876 12 125-538 13 181-974 14 106-471 15 110-220 16 125-545 17 300-3192 18 184-064 19 106-345 20 125-754 21 181-504 22 116-404 23 125-486 24 177-091 25 177-309 26 310-926 27 183-883 28 107-010

1 UPPER PLOW ARM 1 RADIUS ARM 2 SHEAR MOUNT (7.12" SQ X 3" TH) 11 FLG LK SCREW (M12-2.00 X 45MM) 14 WASHER (1/2") 11 FLG LK NUT (M12-1.75) 4 BUMPER 4 FLG LK BOLT (1/2-NC X 3/4") 1 CYL (4.0 X 2.00 X 15.0) 1 COMPOSITION BUSHING (2") 1 TAPERED PIN (38.1MM X 215MM) 2 COMPOSITION BUSHING (1.5") 1 TAPERED INSERT (1.5") 1 FLG SCREW (M16-2.00 X 30MM) 1 MACH BUSHING (1-1/2", 14GA) 1 MACH BUSHING (18GA, 1-1/2") 1 TAPERED PIN (2.000" X 9.100") 2 TAPERED INSERT (2") 4 SCREW (M20-2.50 X 50MM) 1 COMPOSITION BUSHING (2") 2 BUSHING 2 WASHER (2.060", RUBBER) 2 COMPOSITION BUSHING (2.000") 1 PIN (2.00" X 12.65) 2 COMPOSITION BUSHING (2") 2 PIN CAP 1 TAPERED PIN (50.8MM X 150MM) 2 FLG LK SCREW (M12-1.75 X 30MM)

DESCRIPTION

REMARKS

USE LOCTITE 271 USE SEAL REPAIR KIT 190-189. SEE FOOTNOTE 1

USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

1. NOTE CYLINDER ORIENTATION, WITH BARREL PORT UP.

NOTE:

06

ID0251617

18

VIBRATOR STEERING H732, H752 H932, H952, H1032, H1052

3

4 13

2 4

15

12

16

3

3 8 23

23 20 22

11 10

17 19

5

15

21 22 20

7

16

6

9

3

18

4

1

6 5 14

8 18

8

1

HT115 & RT115Q

1

11

RT70, RT90, RT115

ID0027253

19

VIBRATOR STEERING H732, H752 H932, H952, H1032, H1052 REF PART NO. NUMBER

QTY

1 324-647 2 312-403 3 126-131 4 125-538 5 110-220 6 116-519 7 310-919 8 107-009 9 115-002 10 115-001 11 115-017 12 115-020 13 178-779 14 178-780 15 107-745 16 105-505 17 106-471 18 310-921 19 105-416 20 110-895 21 125-773 22 116-520 23 110-259

1 1 4 4 2 4 2 4 1 1 1 1 1 1 2 2 2 2 2 3 2 4 2

DESCRIPTION

REVERSIBLE LOWER CLEVIS UPPER CLEVIS THRUST BUSHING SET (1.5") COMPOSITION BUSHING (1.5") MACH BUSHING (1-1/2", 14GA) WASHER (M40, RUBBER) PIN FLG LK SCREW (M12-1.75 X 25MM) ZERK (02N90) ZERK (02N) ZERK (02N65) ZERK (02N) CLEVIS PIN (2.00" X 9.36") CLEVIS PIN (2.00" X 9.16") CASTLE NUT (1-1/2-NF) ROLL PIN (1/4" X 2-1/2") FLG SCREW (M16-2.00 X 30MM) PIN WASHER (5/8") MACHINERY BUSHING (1.750") COMPOSITION BUSHING (1.75") WASHER (M46, RUBBER) BOLT-ON CLAMP (.625")

REMARKS

SEE FOOTNOTE 1 USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

1. USE 125-545 AS NEEDED IN PLACE OF 110-220

NOTE:

11

ID0027253

20

STOW LOCK H1032, H1052

5 4

6 3 8

7 10

1

2 7 9

8

3

07

ID0251753

21

STOW LOCK H1032, H1052 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10

315-140 177-1078 115-511 315-517 110-377 105-044 105-884 116-403 105-065 115-584

QTY

1 1 2 1 1 1 2 2 1 1

DESCRIPTION

HOOK HEAVY STOW LOCK PIN KLIP RING (1.50") STOW LOCK HANDLE KNOB (1/2-NC, BLUE) JAM NUT (1/2-NC) WASHER (1/2") FRICTION WASHER (.560") LOCKNUT (1/2-NC) TORSION SPRING

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. UNITS PRIOR TO S/N XXXXXX AND YYYYY USE STOW LOCK PIN 183-624.

NOTE:

07

ID0251753

22

DRIVE HOSE CLAMP H1032

9 8

7 10

13

11 12 18

16 15

14

2 17

3 1

11

4 5

14

6

02

ID0251772

23

DRIVE HOSE CLAMP H1032

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

331-658 179-171 125-538 110-220 105-416 106-343 125-770 105-069 106-124 145-906 315-753 110-359 105-271 105-894 105-118 106-398 106-545 110-333

QTY

1 1 1 1 1 1 1 1 1 1 2 2 2 3 1 1 1 1

DESCRIPTION

REMARKS

HOSE CLAMP ARM HOSE CLAMP SUPPORT PIN COMPOSITION BUSHING (1.5") MACH BUSHING (1-1/2", 14GA) WASHER (5/8") SCREW (M16-2.00 X 110MM) COMPOSITION BUSHING (1.000") WASHER (.406") SCREW (M10-1.50 X 110MM) PIVOT TUBE BACK UP-PLATE BOLT-ON CLAMP (1-1/2", SET) SCREW (M10-1.50 X 40MM) LOCKNUT(M10-1.50,PRV TRQ,10.9) WASHER (3/8") WASHER (M16, HARDENED) LOCKNUT (M16-2.0,PRV TRQ,10.9) BOLT-ON CLAMP (1")

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0251772

24

NOTES:

ID0134963

25

ASSEMBLY DRAWINGS

26

VIBRATOR HOUSING

H932, H952 - BEGINS WITH S/N: CMWH932XEC0000207 & CMWH952_ _ _ _ _ _ _ H1032, H1052 - BEGIN W-S/N: CMWH1032TB0000136 & CMWH1052CB0000004 H1032 - ENDS WITH S/N: CMWH1032HD0000409 & CMWH1032JD0000027

9 8 5 4

2 1 8

15

14

15

9 6

10

9 7 9

2

13

7

12 11

12

8 9

10 10 3 11 14 13 10

9

8

SEE FOOTNOTE 3

15

03

3

10

ID0271290

27

VIBRATOR HOUSING

H932, H952 - BEGINS WITH S/N: CMWH932XEC0000207 & CMWH952_ _ _ _ _ _ _ H1032, H1052 - BEGIN W-S/N: CMWH1032TB0000136 & CMWH1052CB0000004 H1032 - ENDS WITH S/N: CMWH1032HD0000409 & CMWH1032JD0000027 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1 VIBRATOR 2 COVER PLATE MACHINING 2 PLUG (16S) 1 SIGHT GAUGE (16S) 1 O-RING (916 D90) 1 PLUG, MAGNETIC (-16S) 20 SCREW (M16-2.00 X 185MM) 8 SCREW (M16-2.00 X 70MM) 28 WASHER (M16, HARDENED) 28 FLG NUT (M16-2.00, 10.9) 2 BEARING RETAINER 8 SCREW (M8-1.25 X 25MM, SOC) 4 DOWEL PIN (3/8" X 1-1/2") 3 PLATE 12 FLG LK SCREW (M12-1.75 X 25MM)

301-1872 166-620 155-138 110-111 155-748 152-150 105-744 106-341 106-398 106-355 315-731 106-916 105-536 312-760 106-806

DESCRIPTION

REMARKS

SEE FOOTNOTE 3 & 4 SEAL WITH SILICONE - REFER TO FOOTNOTES 1 & 2.

INCLUDES O-RING, REF. #5 INCLUDES O-RING, REF. #5 INCLUDES O-RING, REF. #5

NOT SHOWN:

FOOTNOTES:

1. COVERS, REF. # 2, MUST BE USED IN PAIRS. DO NOT MIX OLD AND NEW COVERS ON VIBRATOR HOUSING. 2. REFER TO PREVIOUS VIBRATOR HOUSING PAGE (ID0251485) FOR OLDER INFORMATION REGARDING HOUSING AND COVERS. 3. NOT SHOWN: WELD-IN REPLACEMENT UPPER BOSS P/N 300-5334. USE ONLY IN PAIRS. WELD-IN REPLACEMENT SLOTTED BOSS P/N 301-0766. USE ONLY IN PAIRS. 4. SEE PARTS PAGE "ID323473, VABRATOR HOUSING" FOR VIBRATOR REPLACEMENT ON THE H1032 & H1052.

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS. 2. FOR REPLACEMENT FRAMES ON H732 & H752 SEE PARTS LIST ABOVE. ALL H SERIES VIBRATORS NOW USE THE SAME VIBRATOR FRAME.

03

ID0271290

28

VIBRATOR HOUSING

BEGINS WITH S/N CMWH1032AD0000410, CMWH1052CD0000028

15 1

14 4 5

10

6

7

2 11

16

12

10

13

8 9

14 15 3

02

14

10

ID0323473

29

VIBRATOR HOUSING

BEGINS WITH S/N CMWH1032AD0000410, CMWH1052CD0000028 REF PART NO. NUMBER

QTY

DESCRIPTION

1 301-5633 1 SHAKER FRAME 2 166-620 2 COVER PLATE MACHINING 3 155-138 2 PLUG (16S) 4 152-150 1 PLUG, MAGNETIC (-16S) 5 155-748 1 O-RING (916 D90) 6 110-111 1 SIGHT GAUGE (16S) 7 105-744 20 SCREW (M16-2.00 X 185MM) 8 106-341 6 SCREW (M16-2.00 X 70MM) 9 106-398 6 WASHER (M16, HARDENED) 10 106-355 18 FLG NUT (M16-2.00, 10.9) 11 315-731 1 BEARING RETAINER 12 106-916 4 SCREW (M8-1.25 X 25MM, SOC) 13 105-536 2 DOWEL PIN (3/8" X 1-1/2") 14 312-760 3 PLATE 15 106-806 12 FLG LK SCREW (M12-1.75 X 25MM) 16 125-526 2 BEARING (SPHERICAL ROLLER)

REMARKS

SEE FOOTNOTE 3 SEAL WITH SILICONE - REFER TO FOOTNOTES 1 & 2.

INCLUDES O-RING, REF. #5 INCLUDES O-RING, REF. #5 INCLUDES O-RING, REF. #5

NOT SHOWN:

FOOTNOTES:

1. COVERS, REF. # 2, MUST BE USED IN PAIRS. DO NOT MIX OLD AND NEW COVERS ON VIBRATOR HOUSING. 2. REFER TO PREVIOUS VIBRATOR HOUSING PAGE (ID0251485) FOR OLDER INFORMATION REGARDING HOUSING AND COVERS. 3. MUST USE SHORTER 179-738 PIN AT IN BOTTOM REAR POSITION THIS PIN REPLACES 185-1100 PIN.

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS. 2. FOR REPLACEMENT FRAMES ON H732 & H752 SEE PARTS LIST ABOVE. ALL H SERIES VIBRATORS NOW USE THE SAME VIBRATOR FRAME.

02

ID0323473

30

VIBRATOR HOUSING

H732, H752, H932, H952, H1032 & H1052 ENDS WITH S/N:CMWH932XEC0000206 & CMWH952_ _ _ _ _ _ _

9

8 7

1 9

2

5 4

15

14

15

9

8

6 10 12

9

14 7

2

13

11

12

10 3

9

11

14

13

8

8 10

9

8

15 SEE FOOTNOTE 4 3

05

ID0251485

31

VIBRATOR HOUSING

H732, H752, H932, H952, H1032 & H1052 ENDS WITH S/N:CMWH932XEC0000206 & CMWH952_ _ _ _ _ _ _ REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1 VIBRATOR FRAME 2 COVER PLATE MACHINING 2 PLUG (16S) 1 SIGHT GAUGE (16S) 1 O-RING (916 D90) 1 PLUG, MAGNETIC (-16S) 13 SCREW (M16-2.00 X 185MM) 8 SCREW (M16-2.00 X 70MM) 28 WASHER (M16, HARDENED) 28 FLG NUT (M16-2.00, 10.9) 2 BEARING RETAINER 8 SCREW (M8-1.25 X 25MM, SOC) 3 DOWEL PIN (3/8" X 1-1/2") 3 PLATE 12 FLG LK SCREW (M12-1.75 X 25MM)

324-629 166-620 155-138 110-111 155-748 152-150 105-744 106-341 106-398 106-355 315-731 106-916 105-536 312-760 106-806

DESCRIPTION

REMARKS

OBSOLETE, BEGANS WITH S/N 5Y0130 / REFER TO FOOTNOTE 1 SEAL WITH SILICONE - REFER TO FOOTNOTES 2 & 3.

INCL'S O-RING, REF #5 INCL'S O-RING, REF #5 INCL'S O-RING, REF #5

NOT SHOWN:

FOOTNOTES:

1. VIBRATOR FRAME 310-836, ENDS WITH S/N 5Y0129 & WAS REPLACED WITH VIBRATOR FRAME 324-629.

2. 166-371 VIBRATOR COVER IS REPLACED WITH 166-620 COVER. COVERS MUST BE USED IN PAIRS, DO NOT MIX COVERS ON THE SAME VIBRATOR ASSEMBLY. USE 166-620 FOR ALL REPLACEMENTS. 3. 166-620 IS USED ON: H732 BEGINS WITH S/N J60000001 H752 BEGINS WITH S/N 50000001 H932 BEGINS WITH S/N 5Z0808

H952 BEGINS WITH S/N 5Z0798 H1032 USES VIBRATOR 324-629 & COVER PLATES 166-620.

4. NOT SHOWN: WELD-IN REPLACEMENT UPPER BOSS P/N 300-5334. USE ONLY IN PAIRS. WELD-IN REPLACEMENT SLOTTED BOSS P/N 301-0766. USE ONLY IN PAIRS. NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS. 2. REFER TO VIBRATOR HOUSING BEGINS WITH S/N PP FOR REPLACEMENT FRAMES FOR H732 & H752.

05

ID0251485

32

VIBRATOR WEIGHTS H732, H752 H932, H952, H1032, H1052

10

4 4

9

10 6

7

8

F/N 4

9 9

6

7 3 7

3

8 F/N 4 1 4 5 2 4 5

11

13

11 12 04

14

13

ID0251486

33

VIBRATOR WEIGHTS H732, H752 H932, H952, H1032, H1052 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14

1 RIGHT SHAFT ASSEMBLY 1 LEFT SHAFT ASSEMBLY 4 KEY (3/8" X 2-29/64") 4 BEARING (SPHERICAL ROLLER) 2 EXTERNAL SNAP RING (2.165") 4 VIBRATOR WEIGHT 8 SCREW (M16-2.00 X 130MM, 10.9) 7 WASHER (M16, HARDENED) 8 NUT, FLG (M16-2.00, CL10, ZC) 4 VIBRATOR WEIGHT 4 VIBRATOR WEIGHT 8 SCREW (M12-1.75 X 120MM) 10.9 16 WASHER (7/16") 8 HEX NUT (M12-1.75, 10.9) ZP

185-506 185-507 165-929 125-526 115-498 185-111 106-619 106-398 106-355 185-115 185-136 105-1669 105-059 106-089

DESCRIPTION

REMARKS

INCL'S GEAR & MOTOR DRIVE HUB. REFER TO F/N 5, 6 & 7 INCL'S GEAR. REFER TO F/N 5, 6 & 7 REFER TO F/N 7 REFER TO FOOTNOTE 1 USE LOCTITE #271 REFER TO FOOTNOTE 4 TORQUE TO 175 ft./lbs. (240 N-m) REFER TO FOOTNOTE 2 REFER TO FOOTNOTE 3 USE LOCTIE #271 TORQUE TO 70 ft./lbs. (240 N-m)

NOT SHOWN:

FOOTNOTES:

1. WEIGHTS ARE FOR 601-038 H932/H952 2. WEIGHTS ARE FOR 601-039 H932/H952 & H1032 3. WEIGHTS ARE FOR 601-035 H732/H752 4. H932/H952 M16 WASHER THIS SIDE ONLY WHEN USING FLANGE FACE NUT (REF #8) 106-355.

5. 166-525 RT. SHAFT ASS'Y. IS SUPERCEDED BY 185-506 166-524 LFT. SHAFT ASS'Y. IS SUPERCEDED BY 185-507.

DO NOT MIX OLD/NEW PARTS IN THE SAME VIBRATOR ASSEMBLY. USE 185-506/185-507 FOR ALL REPLACEMENTS. 6. 185-506/185-507 IS USED ON:: H732, BEGINS WITH S/N J60000001 H752, BEGINS WITH S/N A60000015 H932, BEGINS WITH S/N J60000056.

H952, BEGINS WITH S/N K60000052.

7. REQUIRES ASS'Y KIT 190-1086. TAPERED BEARING ALIGNMENT PINS & BEARING DRIVER (SPECIAL TOOLS).

NOTE:

04

ID0251486

34

VIBRATOR WEIGHTS

H1032, H1052 BEGINS WITH S/N: CMWH1032ADOOOO410; CMWH1052CDOOOO028

10 9

4

7

8

9

6 3

8 7

1

2 4

5

14 11 12 04

13

ID0323434

35

VIBRATOR WEIGHTS

H1032, H1052 BEGINS WITH S/N: CMWH1032ADOOOO410; CMWH1052CDOOOO028 REF PART NO. NUMBER

QTY

1 185-1120 2 185-507 3 165-929 4 125-526 5 115-498 6 185-111 7 106-619 8 106-398 9 106-355 10 185-115 11 185-136 12 105-1669 13 105-059 14 106-089

1 RIGHT SHAFT ASSEMBLY 1 LEFT SHAFT ASSEMBLY 4 KEY (3/8" X 2-29/64") 4 BEARING (SPHERICAL ROLLER) 2 EXTERNAL SNAP RING (2.165") 4 VIBRATOR WEIGHT 8 SCREW (M16-2.00 X 130MM, 10.9) 8 WASHER (M16, HARDENED) 8 NUT, FLG (M16-2.00, CL10, ZC) 4 VIBRATOR WEIGHT 4 VIBRATOR WEIGHT 8 SCREW (M12-1.75 X 120MM) 10.9 16 WASHER (7/16") 8 HEX NUT (M12-1.75, 10.9) ZP

DESCRIPTION

REMARKS

SEE FOOTNOTES 1, 2, 3

SEE FOOTNOTE 4

NOT SHOWN:

FOOTNOTES:

1. 185-1120 REPLACES 185-506 RT. SHAFT ASS'Y. DO NOT MIX OLD/NEW PARTS IN THE SAME VIBRATOR ASSEMBLY. USE 185-1120/185-507 FOR ALL REPLACEMENTS. 2. 185-1120/185-507 IS USED ON: H1032, BEGINS WITH S/N: CMWH1032ADOOOO410 H1052, BEGINS WITH S/N: CMWH1052CDOOOOO28 3 REQUIRES 150-3744 MOTOR (15 SPLINE SHAFT) AND ASSOCIATED PLUMBING. 4. WEIGHTS ARE FOR 601-039 H932/H952 & H1032

NOTE:

04

ID0323434

36

SKID SHOE / SOD CUTTER H732, H752 H932, H952, H1032, H1052

2

3

1

5 6

9

7

6 8

04

4

ID0251854

37

SKID SHOE / SOD CUTTER H732, H752 H932, H952, H1032, H1052 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

107-336 331-661 106-355 320-547 116-100 105-982 105-915 105-319 351-582

QTY

4 1 4 1 1 4 2 2 2

REMARKS

DESCRIPTION

FLG SCREW (M16-2.00X45MM,10.9) SOD CUTTER FLG NUT (M16-2.00, 10.9) SKID SHOE SHOCK MOUNT WASHER (2.062") WASHER (.781") BOLT (3/4-NC X 1-1/2") KEY (1/4" X 3-3/4")

INCL'D IN SHIP KIT 190-1555 - FOOTNOTE 1, FOOTNOTE 3 INCL'D IN SHIP KIT 190-1555 - FOOTNOTE 1 INCL'D IN SHIP KIT 190-1555 - FOOTNOTE 1 REFER TO FOOTNOTE 2 REFER TO FOOTNOTE 2

NOT SHOWN:

190-1555

SHIP KIT

FOOTNOTES:

1. REFER TO "ATTACHMENT FRAME / DRAWBAR" ID0251903 FOR MORE INFO. 2. REF NO'S 4 & 5 ARE INCLUDED IN ASSEMBLY 320-546.

3. OPTIONAL HEAVY SOD CUTTER 185-1092

NOTE:

04

ID0251854

38

HYDRAULIC CONTROL LEVERS

2

3 1 10 9

14

8 9 12

4

7

5 13

6

11 04

ID0025235

39

HYDRAULIC CONTROL LEVERS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

QTY

116-921 3 116-941 1 110-439 2 106-561 3 179-883 3 179-886 3 300-2012 3 110-082 3 105-508 3 106-678 3 106-163 3 105-881 6 160-540 3 107-790 3 105-152 3 105-878 3 179-301 3

DESCRIPTION

HANDLE HANDLE (3/8-NC, GREEN) HANDLE (3/8-NC, BLACK) LOCKNUT (M8-1.25, PRV TRQ, 10.9) ROD (10.15") ROD (12.15") ROD (14.15") CLEVIS PIN (1/4" X 11/16") COTTER PIN (3/32" X 1") LOCKNUT (1/4-NF) FLG SCREW (M8-1.25 X 30mm) WASHER (5/16") ROD END CLEVIS YOKE (1/4-NF LH) NUT (1/4-NF) NUT (1/4-NF LH) BRONZE BUSHING (.375")

REMARKS

PLOW LIFT PLOW SWING, PLOW STEER H732 (12.25" AT MID POSITION) H932 (14.25" AT MID POSITION) H932/HT115 (16.25" AT MID POSITION)

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0025235

40

NOTES:

ID0134963

41

HYDRAULICS

42

BLADE STEER HYDRAULICS H1032

3

1

2 3 5 4 4

2 FOOTNOTE 1 19

5

7

10 18

12

6

20

5

8 20

13 11

9 15

18 SEE FOOTNOTE 2

14

16

12

14 17

05

15

11 13

ID0251755

43

BLADE STEER HYDRAULICS H1032

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

158-030 106-381 154-261 154-276 154-255 154-724 154-724 154-355 515-156 515-156 151-029 125-538 125-773 154-230 154-250 153-865 153-865 117-717 115-817 106-598

QTY

1 4 1 1 3 1 1 2 1 1 2 2 2 2 2 1 1 2 1 4

DESCRIPTION

HYD CONTROL VALVE (3-SPOOL) FLG LK SCREW (M8-1.25 X 25MM) CONNECTOR (04O-08S) CONNECTOR (04O-08S90) UNION (04O-04OFX90) HOSE (04OFX-82"-3000) HOSE (04OFX-82"-3000) BK CONNECTOR (04O-04O90BK) HOSE (04OFX45-40"-3000) HOSE (04OFX45-40"-3000) CYL (3.0 X 1.50 X 10.0) COMPOSITION BUSHING (1.5") COMPOSITION BUSHING (1.75") BRANCH TEE (06S-04O-04O) CONNECTOR (04O-06S45) HOSE (040FX45S-16.5"-3000-WG) HOSE (04OFX45S-16.5"-3000-WG) ABRASION SLEEVE (1.00" X 40"") ABRASION SLEEVE (1.59" X 84") WASHER (9/16" HARDENED)

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. REFER TO "LOWER PLOW ARM / SWING POST" ID0251616. FOR ORIENTATION. 2. REFER TO "VIBRATOR STEERING" ID0027253 FOR CLAMP ORIENTATION AND P/N.

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

05

ID0251755

44

PLOW LIFT HYDRAULICS H1032

1

5

3

1 2

4

6 7

3

3

5 3

01

ID0251876

45

PLOW LIFT HYDRAULICS H1032

REF PART NO. NUMBER

1 2 3 4 5 6 7

514-294 154-228 154-227 150-3167 117-714 154-806 110-031

QTY

1 1 3 1 2 1 1

DESCRIPTION

CONNECTOR (08S-06O, ORF) UNION (06O-06OFX90) CONNECTOR (06O-08S90) HOSE (06OFX45-56"-4000) ABRASION SLEEVE (1.00" X 54") HOSE (06OFX-54"-3000) CABLE TIE (1/2") 20" LG

REMARKS

REFER TO FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. REFER TO ID0251755, BLADE STEER HYDRAULICS, TO FIND OTHER HOSES TO USE ZIP TIE ON (REF #7).

NOTE:

1. REFER TO O-RING CHART (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

01

ID0251876

46

PLOW SWING HYDRAULICS H1032

13 14 15 14 SUPPLY

13 15

13

9

RETURN 2

POWER BEYOND 1

21

11 12

13

7

11 10 8

6 4 19 3 18 6 20

5

16 17

03

ID0252003

47

PLOW SWING HYDRAULICS H1032

REF PART NO. NUMBER

QTY

1 309-756 2 107-009 3 151-086 4 125-773 5 125-538 6 154-250 7 154-934 8 154-934 9 154-226 10 154-276 11 153-998 12 155-163 13 153-995 14 154-298 15 154-399 16 181-974 17 106-471 18 110-220 19 115-466 20 178-699 21 105-071

1 1 1 1 1 2 1 1 1 1 2 1 2 1 2 1 1 1 1 1 2

DESCRIPTION

REMARKS

PIN FLG LK SCREW (M12-1.75 X 25MM) CYL (3.0 X 1.50 X 6.0) COMPOSITION BUSHING (1.75") COMPOSITION BUSHING (1.5") CONNECTOR (04O-06S45) HOSE (04OFX45-18"-3000) HOSE (04OFX45-18"-3000) CONNECTOR (04O-06S90) CONNECTOR (04O-08S90) ORIFICE PLATE (.062) REDUCER (08S-06SF) CONNECTOR (08S-08SF) CONNECTOR (10S-10O90) CONNECTOR (10S-10O45) TAPERED INSERT (1.5") FLG SCREW (M16-2.00 X 30MM) MACH BUSHING (1-1/2", 14GA) EXTERNAL SNAP RING (1.500") PIN WASHER (1/2")

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0252003

48

VIRBATOR DRIVE HYDRAULICS H1032

6 7 FOOTNOTE 1

13

11

10 12 8

11

5

12 9

4

1

4 2

04

3

ID0251949

49

VIRBATOR DRIVE HYDRAULICS H1032

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13

1 HYDRAULIC MOTOR 2 SCREW (M12-1.75 X 40MM,10.9) 4 CAM WASHER (1/2") 2 CONNECTOR (12S-16O) 1 CONNECTOR (08O-12S) 1 BK CONNECTOR (08O) 2 BK CONNECTOR (16O-16OBK) 1 HOSE (16OFX45-94"-6000) 1 HOSE (16OFX45-94"-6000) 1 HOSE (08OFX45-94"-3000) 80 SPIRAL WRAP (1.5",SOLD PER FT) 2 ABRASION SLEEVE (2.07" X 102") 1 ABRASION SLEEVE (1.59" X 90")

158-286 106-547 105-159 154-306 154-234 154-390 154-389 515-400 515-400 515-059 110-930 117-198 117-764

DESCRIPTION

REMARKS

USE SHAFT AND BEARING KIT 500-2043

SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1. REFER TO "DRIVE HOSE CLAMPS" ID0251772 FOR HOSE CLAMP ORIENTATION AND P/N'S. 2. NOTE THAT HOSE ON BOTTOM OUTLET OF HYDRAULIC MOTOR GOES TO TOP PORT ON BULKHEAD PLATE & TOP HOSE GOES TO BOTTOM PORT. 3. SPIRAL HOSE WRAP BEGINS AT 43" FROM END OF FITTING, 154-306.

NOTE:

1. REFER TO "DRIVE HOSE CLAMP" ID0251772 FOR INFO ON THIS CLAMP.

04

ID0251949

50

VIBRATOR DRIVE HYDRAULICS H1032, H1052 BEGINS WITH S/N: CMW____

27 28 29

30 1 26 31

17 14 6 22 25

5

2

7 8 3

15

21 25

10 16 10 9 20 4

10 18

19 22

4350 PSI CART. (4) PUMP FORWARD

TO PORT A TO PORT B

3050 PSI CART. 01

CARTRIDGE DETAIL

(11)

6 23 24

11 13 12

"A" PORT

"B" PORT

PORT ORIENTATION DETAIL

ID0323529

51

VIBRATOR DRIVE HYDRAULICS H1032, H1052 BEGINS WITH S/N: CMW____ REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

QTY

DESCRIPTION

331-658 1 HOSE CLAMP ARM 125-770 1 COMPOSITION BUSHING (1.000") 301-6019 1 VALVE MOUNT 150-3748 1 VALVE, CR PORT REL( 5000 PSI MAX, STEEL) 106-006 1 WASHER (.531", HARDENED) 107-009 9 FLG LK SCREW (M12-1.75 X 25MM) 106-395 2 WASHER (M8) 106-602 2 SCREW (M8-1.25 X 80MM) 106-386 2 FLG LOCKNUT (M8-1.25) 154-281 4 CONNECTOR (16S-16O) 150-3744 1 HYD PISTON MOTOR 63CC 15 TOOTH FLUSHING 105-159 4 CAM WASHER (1/2") 106-547 2 SCREW (M12-1.75 X 40MM,10.9) 154-389 2 BK CONNECTOR (16O-16OBK) 154-390 1 BK CONNECTOR (08O) 154-322 1 CONNECTOR (08O-10S90) 515-363 2 HOSE (16OFX45-45"-6000) 150-3900 2 HOSE (16OF-12FLX45-42"-6000) 110-930 80 SPIRAL WRAP (1.5",SOLD PER FT) 110-333 1 BOLT-ON CLAMP (1") 117-764 1 ABRASION SLEEVE (1.59" X 90") 117-454 4 ABRASION SLEEVE (2.07" X 50") 159-039 4 FLANGE HALF (CODE 62) -12 155-737 2 O-RING (-214) 515-059 1 HOSE (08OFX45-94"-3000) 179-171 1 HOSE CLAMP SUPPORT PIN 105-416 1 WASHER (5/8") 110-220 1 MACH BUSHING (1-1/2", 14GA) 106-343 1 SCREW (M16-2.00 X 110MM) 106-398 1 WASHER (M16, HARDENED) 106-545 1 LOCKNUT (M16-2.0,PRV TRQ,10.9)

REMARKS

SEE FOOTNOTE 1 AND CARTRIDGE DETAIL

SEE FOOTNOTE 2 AND PORT ORIENTATION DETAIL

NOT SHOWN:

FOOTNOTES:

1. 4350 PSI (300 BAR) CARTRIDGE IS ON SIDE PLUMBED TO MOTOR PORT "A".

2. "B" PORT TO FORWARD PORT ON PUMP. REQUIRES 150-3748 VALVE AND 185-1120 SHAFT ASSEMBLY.

NOTE:

01

ID0323529

52

HYDRAULIC CONTROL LEVERS H1032

3

2

1 11 6

7

4 5

10 6

12 8

9

14

15 13 01

ID0255432

53

HYDRAULIC CONTROL LEVERS H1032

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

116-921 110-439 116-941 179-301 106-163 105-881 106-561 179-886 105-878 105-152 160-540 106-678 107-790 105-508 110-082

QTY

3 2 1 3 3 6 3 3 3 3 3 3 3 3 3

DESCRIPTION

REMARKS

HANDLE HANDLE (3/8-NC, BLACK) HANDLE (3/8-NC, GREEN) BRONZE BUSHING (.375) FLG SCREW (M8-1.25 X 30MM) WASHER (5/16") LOCKNUT (M8-1.25,PRV TRQ,10.9) ROD (12.15") NUT (1/4-NF, LH) NUT (1/4-NF) ROD END LOCKNUT (1/4-NF) CLEVIS (1/4-NF-LH) COTTER PIN (3/32" X 1") CLEVIS PIN (1/4 X 11/16)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0255432

54

CYL (4.0 X 2.00 X 15.0)

2

11

3

8

5

6

7

4

13 9 14

10 12 1

03

ID0143387

55

CYL (4.0 X 2.00 X 15.0) REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

158-182 149-737 149-006 149-307 149-303 157-559 157-035 157-036 157-570 106-144 157-558 106-145 157-044 125-793

QTY

1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

CYLINDER BARREL (4.0 X 15.0) CYLINDER ROD (2.00 X 16.0) CYLINDER HEAD (4.0 X 2.00) CYLINDER PISTON (4.0 X 2.00) LOCK RING (4.0) U-SEAL (2.000") O-RING (342 D90) BACKUP RING (342 D90) BACKUP RING (238 D90) WASHER (1") WIPER SEAL (2.000") BOLT (1-NC X 2-1/4", GD8) O-RING (238 D90) WEAR RING

INCLUDES CAPLUG 111-009

SEAL REPAIR KIT (4.0" X 2.0")

INCLUDES REF NO.'S 6-14

NOT SHOWN:

190-189

FOOTNOTES:

NOTE:

03

ID0143387

56

HYDRAULIC CYLINDERS (2.5" x 1.5") 1

6

5

7 8 4 9 3 10

2

04

ID0015833

57

HYDRAULIC CYLINDERS (2.5" x 1.5") REF PART NO. NUMBER

QTY

1 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

CYL (2.5 X 1.5 X 2.5) CYLINDER BARREL (2.5 X 2.5) CYLINDER ROD (1.50 X 2.5) CYL (2.5 X 1.5 X 3.0) CYLINDER BARREL (2.5 X 3.0) CYLINDER ROD (1.50 X 3.0) CYL (2.5 X 1.5 X 4.0) CYLINDER BARREL (2.5 X 4.0) CYLINDER ROD (1.50 X 4.0) CYL (2.5 X 1.5 X 5.0) CYLINDER BARREL (2.5 X 5.0) CYLINDER ROD (1.50 X 5.0) CYL (2.5 X 1.5 X 6.0) CYLINDER BARREL (2.5 X 6.0) CYLINDER ROD (1.50 X 6.0) CYL (2.5 X 1.5 X 8.0) CYLINDER BARREL (2.5 X 8.0) CYLINDER ROD (1.50 X 8.0) CYL (2.5 X 1.5 X 10.0) CYLINDER BARREL (2.5 X 10.0) CYLINDER ROD (1.50 X 10.0) CYL (2.5 X 1.5 X 12.0) CYLINDER BARREL (2.5 X 12.0) CYLINDER ROD (1.50 X 12.0) CYL (2.5 X 1.5 X 16.0) CYLINDER BARREL (2.5 X 16.0) CYLINDER ROD (1.50 X 16.0) CYL (2.5 X 1.5 X 20.0) CYLINDER BARREL (2.5 X 20.0) CYLINDER ROD (1.50 X 20.0) CYL (2.5 X 1.5 X 24.0) CYLINDER BARREL (2.5 X 24.0) CYLINDER ROD (1.50 X 24.0)

3 4 5 6 7 8 9 10

150-768 150-779 150-986 106-098 500-031 157-021 157-542 157-539

1 1 1 1 1 1 1 1

CYLINDER HEAD (2.5 X 1.50) LOCK RING (2.5) CYLINDER PISTON (2.5 X 1.50) FLG BOLT (3/4-NC X 2", GD8) O-RING (228 D90) BACKUP RING (228 D90) U-SEAL (1.500") WIPER SEAL (1.500")

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

REMARKS

DESCRIPTION

149-676 152-022 149-731 149-677 152-005 150-431 149-678 150-283 150-434 149-679 149-810 153-038 149-680 152-010 153-003 149-681 150-295 153-027 151-200 150-692 150-416 151-071 152-015 150-426 151-035 150-289 150-419 149-798 149-762 150-669 151-090 152-026 150-447

SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1, 2 & 4 SEE FOOTNOTES 1 & 2 SEE FOOTNOTES 1 & 2 .

INCL. MOLDED-ON WEAR RING, SEE FOOTNOTE 4 SEE FOOTNOTE 3

NOT SHOWN:

259-100 259-235 259-239 259-241 259-188

U-SEAL INSTALLER (1" - 1.499") 1.00 ROD WIPER TOOL WIPER/SEAL INSTALLER (2") PISTON INSTALLER (2") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. REF. #1 & #2 ARE SPECIFIC TO EACH CYLINDER, REF. #3 THRU #10 ARE COMMON FOR ALL THE ABOVE LISTED CYLINDERS. 2. SEAL REPAIR KIT P/N: 190-170 3. APPLY LOCTITE 277 OR EQUIVALENT, TORQUE TO 290-325 FT-LBS 4. SUBSTITUTE FOR 150-986 CYL PISTON : {150-7531 CYL PISTON, 125-775 WEAR RING, 157-535 BACKUP RING & 157-019 O-RING} NOTE:

04

ID0015833

58

59

60

NOTES:

ID0134963

61

ACCESSORIES

62

PLOW BLADES

RT115 QUAD TRACK - H1032, H1052 BEGINS WITH S/N: CMWH1032TB0000136 & CMWH1052CB0000004

7 4 8

5

6 6

12

7 5

11

13 12 10 5

9

12 10 11

14 15

6

7 1

2 3

06

ID0274821

63

PLOW BLADES

RT115 QUAD TRACK - H1032, H1052 BEGINS WITH S/N: CMWH1032TB0000136 & CMWH1052CB0000004 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

185-345 185-1081 185-281 179-738 105-446 106-067 105-514 179-961 178-347 105-423 105-379 178-345 185-1100 301-1580 185-351

QTY

1 1 1 2 6 6 6 2 1 2 2 6 1 1 1

DESCRIPTION

BULLET BLADE (1" X 3" X 24") FEED BLADE QT(28/32/36 X 2 X 10R) FEED BLADE (28/32/36 X 1.5 X 7.5R) PLOW BLADE PIN WASHER (1-1/2") CASTLE NUT (1-1/2-NF) COTTER PIN (.250 X 3.000) PLOW PIN SPACER PIN (2.00" X 5.50") WASHER (3/4") LK BOLT (3/4-NC X 1-1/4", NLK) TENSION BUSHING (2.375) PLOW BLADE PIN WING BOLT (1/2-NX X 3") CABLE GUIDE (1.5 X 7.5R X 36)

REMARKS

RECOMMENDED FOR QUAD TRACK, INCLUDES REF NO.'S 14 & 15 USE REPLACEMENT GUIDE 185-351 SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 1 & 2 SEE NOT SHOWN FOR OTHER LENGTHS.

NOT SHOWN:

191-401 190-1781 WING BOLTS: 106-072 185-1070 301-2277

KIT, LOWER BOSS MODIFIED VERTICAL PLOW BLADE MOUNT KIT

SEE FOOTNOTE 1 SEE FOOTNOTE 2

WING BOLT (1/2-NC X 1-1/4") WING BOLT (1/2-13 UNC X 1.50") WING BOLT (1/2-NC X 2 1/2")

BULLET BLADES: 185-346 185-356 185-357 185-345

1" X 3" X 30" 1" X 3" X 22"/26"/30" 1" X 3" X 28"/32"/36" 1" X 3" X 24"

FEED BLADES: 185-334 185-333 185-335 185-329 185-332 185-306 185-305 185-310 185-311 185-315 185-316 185-1091 185-283 185-284 185-285 185-1103 185-1110

FEED BLADE ASS'Y (1 X 7.38 X 30) FEED BLADE ASS'Y (1.5 X 6.63 X 30) FEED BLADE ASS'Y (1.5 X 6.63 X 36) FEED BLADE ASS'Y (2 X 6.63 X 36) FEED BLADE ASS'Y (2 X 10 X 30) FEED BLADE (22/26/30 X 1 X 9R) FEED BLADE (22/26/30 X 1 X 9R) FEED BLADE (22/26/30 X 1.5 X 9R) FEED BLADE (22/26/30 X 1.5 X 9R) FEED BLADE (22/26/30 X 2 X 10R) FEED BLADE (22/26/30 X 2 X 10R) FEED BLADE QT (28/32/36 X 1.5 X 7.5R) FEED BLADE (28/32/36 X 1.5 X 7.5R) FEED BLADE (28/32/36 X 2 X 10R) FEED BLADE (28/32/36 X 2 X10R) FEED BLADE QT (34/38/42 X 1.5 X 7.5R) FEED BLADE QT (34/38/42 X 2.0 X 10R)

USE REPLACEMENT GUIDE 186-614 USE REPLACEMENT GUIDE 186-639 USE REPLACEMENT GUIDE 185-228 USE REPLACEMENT GUIDE 185-216 USE REPLACEMENT GUIDE 186-790 USE REPLACEMENT GUIDE 185-353 NO TOE, USE REPLACEMENT GUIDE 185-353 USE REPLACEMENT GUIDE 185-354 NO TOE, USE REPLACEMENT GUIDE 185-354 USE REPLACEMENT GUIDE 185-355 NO TOE, USE REPLACEMENT GUIDE 185-355 USE REPLACEMENT GUIDE 185-351 , RECOMMENDED FOR QUAD TRACK NO TOE, USE REPLACEMENT GUIDE 185-351 USE REPLACEMENT GUIDE 185-352 NO TOE, USE REPLACEMENT GUIDE 185-352 USE REPLACEMENT GUIDE 185-1117 , RECOMMENDED FOR QUAD TRACK USE REPLACEMENT GUIDE 185-1118 , RECOMMENDED FOR QUAD TRACK

FOOTNOTES:

1. KIT #191-401 INCLUDES REF NO.'S: 5-8 & 12. KIT IS REQUIRED WHEN USING THE VERTICAL BLADE AND CONTAINS COMPONENTS TO CROSS TIE THE FIRST TWO HORIZONTAL PIN BOSS HOLES. THIS KIT MUST BE USED AT ALL TIMES, EVEN IF A PLOW BLADE IS NOT ATTACHED TO FRONT HOLES. 2. KIT #190-1781 INCLUDES REF NO.'S: 5, 6, 7 & 9-12. KIT IS REQUIRED WHEN MOUNTING A VERTICAL BLADE. KIT 191-401 SHOULD ALSO BE USED. NOTE:

06

ID0274821

64

PLOW BLADES

RT115 QUAD TRACK - H1032, H1052 ENDS WITH S/N_________________.

7 5 4

6

12 8

8

12

11 10 9

5 12

10 11

7 6

1

2 3

07

ID0254280

65

PLOW BLADES

RT115 QUAD TRACK - H1032, H1052 ENDS WITH S/N_________________.

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12

185-345 185-1081 185-281 179-738 105-446 106-067 105-514 179-961 178-347 105-423 105-379 178-345

QTY

1 1 1 3 6 6 6 2 1 2 2 6

DESCRIPTION

BULLET BLADE (1" X 3" X 24") FEED BLADE QT(28/32/36 X 2 X 10R) FEED BLADE (28/32/36 X 1.5 X 7.5R) PLOW BLADE PIN WASHER (1-1/2") CASTLE NUT (1-1/2-NF) COTTER PIN (.250 X 3.000) PLOW PIN SPACER PIN (2.00" X 5.50") WASHER (3/4") LK BOLT (3/4-NC X 1-1/4", NLK) TENSION BUSHING (2.375)

REMARKS

RECOMMENDED FOR QUAD TRACK SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 1 & 2

NOT SHOWN:

191-401 191-1508 CABLE GUIDE: 185-351

KIT, LOWER BOSS VERTICAL PLOW BLADE MOUNT KIT

SEE FOOTNOTE 1 SEE FOOTNOTE 2

1.5" X 7" X 36"

BULLET BLADES: 185-346 185-356 185-357 185-345

1" X 3" X 30" 1" X 3" X 22"/26"/30" 1" X 3" X 28"/32"/36" 1" X 3" X 24"

FEED BLADES: 185-334 185-333 185-335 185-329 185-332 185-306 185-305 185-310 185-311 185-315 185-316 185-1091 185-283 185-284 185-285 185-1103 185-1110

FEED BLADE ASS'Y (1 X 7.38 X 30) FEED BLADE ASS'Y (1.5 X 6.63 X 30) FEED BLADE ASS'Y (1.5 X 6.63 X 36) FEED BLADE ASS'Y (2 X 6.63 X 36) FEED BLADE ASS'Y (2 X 10 X 30) FEED BLADE (22/26/30 X 1 X 9R) FEED BLADE (22/26/30 X 1 X 9R) FEED BLADE (22/26/30 X 1.5 X 9R) FEED BLADE (22/26/30 X 1.5 X 9R) FEED BLADE (22/26/30 X 2 X 10R) FEED BLADE (22/26/30 X 2 X 10R) FEED BLADE QT (28/32/36 X 1.5 X 7.5R) FEED BLADE (28/32/36 X 1.5 X 7.5R) FEED BLADE (28/32/36 X 2 X 10R) FEED BLADE (28/32/36 X 2 X10R) FEED BLADE QT (34/38/42 X 1.5 X 7.5R) FEED BLADE QT (34/38/42 X 2.0 X 10R)

USE REPLACEMENT GUIDE 186-614 USE REPLACEMENT GUIDE 186-639 USE REPLACEMENT GUIDE 185-228 USE REPLACEMENT GUIDE 185-216 USE REPLACEMENT GUIDE 186-790 USE REPLACEMENT GUIDE 185-353 NO TOE, USE REPLACEMENT GUIDE 185-353 USE REPLACEMENT GUIDE 185-354 NO TOE, USE REPLACEMENT GUIDE 185-354 USE REPLACEMENT GUIDE 185-355 NO TOE, USE REPLACEMENT GUIDE 185-355 USE REPLACEMENT GUIDE 185-351 , RECOMMENDED FOR QUAD TRACK NO TOE, USE REPLACEMENT GUIDE 185-351 USE REPLACEMENT GUIDE 185-352 NO TOE, USE REPLACEMENT GUIDE 185-352 USE REPLACEMENT GUIDE 185-1117 , RECOMMENDED FOR QUAD TRACK USE REPLACEMENT GUIDE 185-1118 , RECOMMENDED FOR QUAD TRACK

FOOTNOTES:

1. KIT #191-401 INCLUDES REF NO.'S: 5-8 & 12. KIT IS REQUIRED WHEN USING THE VERTICAL BLADE AND CONTAINS COMPONENTS TO CROSS TIE THE FIRST TWO HORIZONTAL PIN BOSS HOLES. THIS KIT MUST BE USED AT ALL TIMES, EVEN IF A PLOW BLADE IS NOT ATTACHED TO FRONT HOLES. 2. KIT #191-1508 INCLUDES REF NO.'S: 5, 6, 7 & 9-12. KIT IS REQUIRED WHEN MOUNTING A VERTICAL BLADE. KIT 191-401 SHOULD ALSO BE USED.

NOTE:

07

ID0254280

66

CABLE GUIDE

H732, H752, H932, H952, H1032, H1052

9

10

11 12 2

1

4 7

6 5 3

8

08

ID0055286

67

CABLE GUIDE

H732, H752, H932, H952, H1032, H1052 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

QTY

DESCRIPTION

191-489 CABLE GUIDE KIT 318-884 1 CABLE GUIDE 185-541 1 CABLE GUIDE 184-453 7 SPACER TUBE 107-520 7 PIN (.375" X 3.75") 110-033 7 HAIR CLIP PIN (1/8" X 1/2") 117-207 7 SPRING 106-391 4 WASHER (M12) 106-333 4 SCREW (M12-1.75 X 40mm, 8.8) 106-354 4 FLANGE NUT (M12-1.75) 105-827 4 FLG LK BOLT (3/8-NC X 1-1/4") 105-874 4 FLG LK BOLT (3/8-NC X 1-1/2") 105-081 4 BOLT (3/8-NC X 3-1/4") 309-952 1 ROPS CABLE GUIDE 181-075 4 SLEEVE 105-814 4 FLG LOCKNUT (3/8-NC)

REMARKS

INCL. REF #'S 1-12 & SEE FOOTNOTE 2 OBSOLETE, SEE FOOTNOTE 2

OBSOLETE, SEE FOOTNOTE 1 FOR HT115 ONLY;

SEE FOOTNOTE 1

FOR HT115 ONLY;

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1- USE LOCTITE 242 OR EQUIVALENT. 2- KIT 191-182 HAS BEEN REPLACED BY KIT 191-489, REF #1.

CABLE GUIDE 185-541.

318-884 HAS BEEN REPLACED BY

NOTE:

08

ID0055286

68

PIPE PULLER .625" - 1.250"

1

2

3

01

ID0139361

69

PIPE PULLER .625" - 1.250" REF PART NO. NUMBER

1.

2.

3.

368-290 107-113 107-114

QTY

1 1 1

DESCRIPTION

REMARKS

PIPE PULLER (.625" TO 1.250") NUT (#12-24) EYE BOLT (#12-24 X 1-1/2")

INCL REF NO.'S 2 AND 3

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0139361

70

NOTES:

ID0134963

71

MISCELLANEOUS

72

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

73

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

74

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

75

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

76

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which are D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

77

78

H1032 PLOW ATTACHMENT Related Publications Component

Ass’y

P/N

Model: H1032 Parts Manual ............................................................................. ........... 053-2237 RT115Q Operators Manual ................................................................... ........... 053-2255

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ............................... 190-051 O-ring Repair Kit - Field Service (46 different O-rings) ...................................... 190-052

02

ID0257009

79

ID0040564

80

ID0135281