Ditch Witch FM13VFM13X Honda® GX390 Parts Manual 053-2253

FM13V/FM13X Honda® GX390

Parts Manual

Issue 16

053-2253

1

FM13V/FM13X ISSUE NO. 16PL-06/22 For Replacement Copy Order P/N 053-2253

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works

This manual contains information concerning the following models: FM13V/FM13X

Copyright 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2021, 2022 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Jet Trac, Roto Witch, Subsite, Fluid Miser, Power Pipe, Super Witch, Pierce Arrow, Zahn, The Underground, and The Underground Authority Worldwide are registered trademarks of The Charles Machine Works, Inc.

ID0258759

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY ______________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy July 2019

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse (including, but not limited to, rollover), abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 07

ID0134872

5

CONTENTS______________________ FM13V

Accessories

3” Centrifugal Pump – FM13V..................... 72 3” Centrifugal Pump – FM13V, FM13X .......... 70 Battery & Cables ........................... 58, 60, 62 Decal Location – 500 Gal. Tank ..................... 16 Decal Location – 400 Gal. Tank ..................... 12 Decal Location – 950 Gal. Tank ..................... 18 Decal Location – FM13V................................ 8 Decal Location – FM13X .............................. 10 Decal Plate – 400 Gal. Tank .......................... 14 Electrical Connections – FM13V .................. 56 Electrical Connections – FM13V, FM13X ....... 54 Electrical Schematic – FM13V ..................... 98 Engine – FM13V .......................................... 66 Engine – FM13V & FM13X ............................. 64 Engine, Rope Start..................................... 68 Engine & Pump Mount – B&S..................... 36 Engine & Pump Mount – FM13V........... 40, 42 Engine & Pump Mount – FM13V, FM13X ...... 38 Engine Wiring Diagram ............................. 92 Fuel Tank/Battery Mt. – B&S ...................... 46 Fuel Tank/Battery Mt. – FM13V ............ 50, 52 Fuel Tank/Battery Mt. ........................ 44, 48 Harness – FM13V ........................................ 94 Hopper ...................................................... 20 Hopper Assembly ...................................... 22 Hopper Base .............................................. 24 Hopper Base Mount .................................. 26 Hopper Installation – FM13V ...................... 28 Hopper Installation – FM13X ...................... 30 Hose Routing ............................................. 78 Platform Installation ................................. 34 Tank Base .................................................. 80 Tank & Plumbing, 500 Gal. ....................... 82 Tank Assembly, 950 Gal. .......................... 86 Tank Fill Plumbing, 500 Gal. ..................... 84 Tank Fill Plumbing, 400 Gal. ..................... 76 Tank Fill Plumbing, FM50 .......................... 90 Tank Plumbing, 400 Gal. ........................... 74 Tank Plumbing, 950 Gal. ........................... 88 Umbrella Mount...................................... 102 Venturi, 2” Flange ..................................... 32

Drilling Fluid Transfer ............................. 112 Fluid Coupler Adapters ........................... 114 Fluid Mixing Accessories......................... 105 Garden Hose Adapter ............................. 110 Water Transfer System ........................... 108

Miscellaneous Bolt/Nut Torque Chart ........................... 118 Filters ..................................................... 125 Optional Kits ........................................... 126 Related Publications ............................... 124 Replacement O-Ring Chart ..................... 123 Warranty Registration ............................ 128

ID0258809

6

7

FM13V FLUID MIXER

8

DECAL LOCATION FM13V

NEW GRAPHICS

270XXXX-1

5

VIEW ROTATED 90º

8 10 12 4 1

9

7 2 5

6 3

10

ID0167505

9

DECAL LOCATION FM13V REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12

270-1411 270-5725 275-419 275-173 270-5131 270-5127 270-1392 270-5747 273-475 274-208 273-265 273-232 274-442 270-6406 270-5709

QTY

1 1 1 1 2 2 1 1 1 1 2 1 1

DESCRIPTION

DECAL KIT - FM13V FM13V SERVICE DECAL KIT WARNING NO FLAME FUEL TANK (GASOLINE) BATTERY DISCONNECT SWITCH BATTERY FM13V MODEL ID FM13V MODEL ID W/LOGO WARNING READ OPERATOR MANUAL NOTICE FUEL SHUTOFF ALERT DANGER ELECTRIC SHOCK NOTICE LUBE FITTING LIFT LOCATION OPERATOR MANUAL REPLACEMENT DANGER SHUT ENGINE OFF

REMARKS

LOCATE INSIDE MANUAL BOX

FOOTNOTES

10

ID0167505

10

DECAL LOCATION FM13X

VIEW ROTATED 90º 8 13

5

12

4 9

14

10

1

5

7 2

3

07

6

ID0455904

11

DECAL LOCATION FM13X REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

270-7719 701-419 275-173 270-5131 270-5127 270-7715 700-143 270-7019 270-2413 270-7726 274-442 270-7792 270-7105 270-4953 270-5974

QTY

1 1 1 1 2 1 1 1 1 2 1 1 1 1

DESCRIPTION

FM13X SERVICE DECAL KIT WARNING NO FLAME ISO FUEL TANK (GASOLINE) BATTERY DISCONNECT SWITCH BATTERY FM13X MODEL ID WARNING READ OPERATOR MANUAL ISO NOTICE FUEL SHUTOFF ALERT ISO DANGER ELECTRIC SHOCK ISO NOTICE LUBE 50 HOURS ISO LIFT LOCATION OPERATOR MANUAL REPLACEMENT ISO FM13/FM13V/FM13X SERVICE/LUBE CHART ISO CAUTION SILICA DUST ISO DANGER SHUT ENGINE OFF ISO

REMARKS

LOCATE INSIDE MANUAL BOX

FOOTNOTES

07

ID0455904

12

DECAL LOCATION 400 GAL

6 5

7

2707419-1

4 2 3

02

2

1

ID0561902

13

DECAL LOCATION 400 GAL REF PART NO. NUMBER

1 2 3 4 5 6 7

270-8103 270-2414 274-318 274-442 270-7020 270-8100 270-8101 270-8157

QTY

2 4 4 2 1 1 1

DESCRIPTION

REMARKS

400G TANK SERVICE DECAL KIT ISO DANGER LINE LOCATIONS TIE DOWN LOCATION LIFT LOCATION NOTICE DO NOT LIFT ISO DW LOGOTYPE 64.0” X 10.86” DW LOGO 9” X 7.69” - DRIPMOLD PLATE GRAPHIC STRIPE

FOOTNOTES

02

ID0561902

14

DECAL PLATE 400 GAL TANK

2

1

3

05

4

ID0543930

15

DECAL PLATE 400 GAL TANK REF PART NO. NUMBER

QTY

1 302-9660 2 107-687 3 108-156 4 107-778

1 DECAL PLATE 6 CLIP NUT M8-1.25, LONG, WIDE 6 WASHER (5/16") 6 SCREW (M8-1.25 X 30MM,BUT SOC)

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0543930

16

DECAL LOCATION FM 500 GAL TANK

NEW GRAPHICS 5

5

1

2

3 3 2 4

06

ID0174906

17

DECAL LOCATION FM 500 GAL TANK REF PART NO. NUMBER

1 2 3 4 5

270-1583 270-5727 270-7759 270-2414 274-318 274-442 270-7020 700-230 270-6303 270-7286

QTY

2 4 4 2 2 2 2

DESCRIPTION

DECAL KIT - 500 GAL TANK 300G, 500G, 1000G TANK SERVICE DECAL KIT 300G, 500G, 950G TANK SERVICE DECAL KIT DANGER LINE LOCATIONS ISO TIE DOWN LOCATION LIFT LOCATION NOTICE DO NOT LIFT ISO 18" STACKED DITCH WITCH STACKED LOGOTYPE STACKED GRAY LOGOTYPE

REMARKS

WITH FLUID

FOOTNOTES

06

ID0174906

18

DECAL LOCATION FM 950 GAL TANK NEW GRAPHICS

5

5

2 3 1

4 2

09

3

ID0124882

19

DECAL LOCATION FM 950 GAL TANK REF PART NO. NUMBER

1 2 3 4 5

275-876 270-5727 270-7759 270-2414 274-318 274-442 270-7020 700-230 270-6303 270-7286

QTY

2 4 4 2 2 2 2

DESCRIPTION

DECAL KIT - FM50 TANK 300G, 500G, 1000G TANK SERVICE DECAL KIT 300G, 500G, 950G TANK SERVICE DECAL KIT DANGER ELECTROCUTION ISO TIE DOWN LOCATION LIFT LOCATION NOTICE DO NOT LIFT ISO 18" STACKED DITCH WITCH STACKED LOGOTYPE STACKED GRAY LOGOTYPE

REMARKS

WITH FLUID

FOOTNOTES

09

ID0124882

20

HOPPER

FM5, FM13, FM13V, & FM25

3

2 21 12

25

14

16

13 22

17 19

11

5 18 3

6

4

7 20 10

9 15

8

23 1 3

04

24

ID0033226

21

HOPPER

FM5, FM13, FM13V, & FM25 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

1 HOPPER WELDMENT 1 BAG CUTTER 10 POP RIVET (3/16" X .664") 1 LANYARD CABLE (13.5") 1 WASHER (.191") 1 METER PLATE 1 BACKER PLT 1 WEATHER FLAP 1 COVER 1 LEFT BRACKET 1 RIGHT BRACKET 1 ANCHOR BRACKET 1 HOOD LATCH 1 SCREW (M6-1.00 X 45MM) 8 FLG LOCKNUT (M6-1.00) 1 LOCKNUT (M8-1.25,PRV TRQ,10.9) 1 SCREW (M8-1.25 X 12MM) 4 CARRIAGE BOLT (M10-1.50X20MM) 4 FLG LOCKNUT (M10-1.50) 8 FLG SCREW (M6-1.00 X 20MM) 1 SCREEN 1 SCREEN FRAME 1 LATCH BRACKET 2 POP RIVET (3/16" X 1/2") 1 LOCKNUT (M6-1.00,PRV TRQ,10.9)

309-293 310-210 110-348 110-239 106-205 309-914 302-2091 302-2092 309-090 310-567 310-566 110-224 110-222 106-093 106-385 106-561 107-519 107-700 106-387 106-161 305-621 309-355 110-223 110-253 106-538

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0033226

22

HOPPER ASSEMBLY

26

FM13X

27

28

25

30

15

18 24

29 31 32

14 16 7

22

1

23 38 39 37

21

17 14

34

20 15

33

19 13 35 36

2 40

6 5

6 4 2 3 12 11

1

10 9

02

8

ID0440815

23

HOPPER ASSEMBLY FM13X

REF PART NO. NUMBER

QTY

350-5445 1 106-387 2 105-2167 3 150-5755 4 105-2214 5 105-2168 6 150-4804 7 106-205 8 110-026 9 514-161 10 120-073 11 153-197 12 114-021 13 302-2088 14 106-161 15 302-2091 16 302-2092 17 106-385 18 106-724 19 110-253 20 110-223 21 107-700 22 302-4711 23 105-834 24 501-153 25 302-4710 26 110-222 27 106-561 28 106-538 29 106-093 30 110-224 31 309-090 32 107-519 33 310-566 34 310-567 35 105-297 36 107-936 37 110-239 38 110-348 39 309-914 40 157-115

HOPPER SUB 8 FLG LOCKNUT (M10-1.50) 2 FLANGE CLAMP (2") 1 TEE (2" FLG-2" FLG-3/4 NPT) 1 GASKET (2") 2 HANDLE RISER 1 3/8" 1 2" BALL VALVE 1 WASHER (.191") 1 WORM CLAMP (1/2" TO 1-1/4") 1 S/O COUPLER (12N-12H) 1 SHUT-OFF (12NF-12NF) 1 STREET ELBOW (12N-12NF90) 1 NIPPLE (12N-3 1/2") 1 HOPPER WELDMENT 8 FLG SCREW (M6-1.00 X 20MM) 2 BACKER PLT 1 WEATHER FLAP 8 FLG LOCKNUT (M6-1.00) 4 FLG SCREW (M10-1.50 X 25MM) 2 POP RIVET (3/16" X 1/2") 1 LATCH BRACKET 4 CARRIAGE BOLT (M10-1.50X20MM) 1 CUTTER BASE PLATE 2 FLG LOCKNUT (3/8-NC) 2 FLG LK BOLT (3/8-NC X 5/8") 1 BAG BLADE 1 HOOD LATCH 1 LOCKNUT (M8-1.25,PRV TRQ,10.9) 1 LOCKNUT (M6-1.00,PRV TRQ,10.9) 1 SCREW (M6-1.00 X 45MM) 1 ANCHOR BRACKET 1 COVER 1 SCREW (M8-1.25 X 12MM) 1 RIGHT BRACKET 1 LEFT BRACKET 1 BOLT (1/4-NC X 3-1/4") 1 WASHER (1/4"ID X 1"OD) 1 LANYARD CABLE (13.5") 2 POP RIVET (3/16" X .664") 1 METER PLATE 1 O-RING 2.36" X 2.64" X .140 (229 D90)

DESCRIPTION

REMARKS

NOT SHOWN: FOOTNOTES:

NOTE:

02

ID0440815

24

HOPPER BASE FM13V, FM25

HOPPER

2

2

1 1

2

4

7

1

5 3

4 03

6

1

2

ID0157597

25

HOPPER BASE FM13V, FM25 REF PART NO. NUMBER

QTY

1 106-387 2 107-700 3 150-1900 4 300-2478 5 300-4835 6 310-327 7 159-789

12 FLG LOCKNUT (M10-1.50) 12 CARRIAGE BOLT (M10-1.50X20MM) 1 NIPPLE (20N-3.5") 2 HOPPER BASE 1 VALVE HANDLE 1 MIXING VENTURI 1 SHUT-OFF (20NF-20NF)

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0157597

26

HOPPER BASE MOUNT FM13X, FM25X

1

3 4 5 2

2 5

4

3

03

ID0440922

27

HOPPER BASE MOUNT FM13X, FM25X REF PART NO. NUMBER

1 2 3 4 5

QTY

DESCRIPTION

REMARKS

350-5444 HOPPER BASE MOUNT 302-6212 2 HOPPER BASE 106-724 8 FLG SCREW (M10-1.50 X 25MM) 106-387 8 FLG LOCKNUT (M10-1.50) 302-6214 4 ADJUSTABLE PLATE 116-789 AR RUBBER EDGE TRIM 1/8" (FT)

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0440922

28

HOPPER INSTALLATION FM13V

12 16 15

10

1

13

10 8

2 3 17

1

7 9

14

4 6

5

16

18

SEE FOOTNOTE 1

11 8

02

ID0159819

29

HOPPER INSTALLATION FM13V

REF PART NO. NUMBER

QTY

DESCRIPTION

1 110-250 2 WORM CLAMP (1.25" TO 2.125") 2 116-047 15 BULK HOSE (1-1/2",SOLD PER FT) 3 155-188 1 S/O COUPLER (24N-24H) 4 514-161 1 S/O COUPLER (12N-12H) 5 153-197 1 STREET ELBOW (12N-12NF90) 6 114-021 1 NIPPLE (12N-3 1/2") 7 157-300 1 -32FPT X -24FPT REDUCER 8 106-386 6 FLG LOCKNUT (M8-1.25) 9 166-357 1 GROOVED COUPLING (40-40) 10 106-991 6 FLG LK SCREW (M8-1.25 X 20MM) 11 300-2726 1 MIXER BASE 12 150-1411 1 SUCTION TUBE 13 300-2535 1 BRACKET 14 150-1413 1 S/O COUPLER (-48, GROOVED) 15 115-374 36 BULK HOSE (3/4", SOLD PER 1") 16 110-026 2 WORM CLAMP (1/2" TO 1-1/4") 17 115-167 1 PLUG (12N, SQ) 18 120-073 1 SHUT-OFF (12NF-12NF)

REMARKS

USE 1 @ 15"

SEE FOOTNOTE 1 USE 1 @ 36"

NOT SHOWN:

FOOTNOTES:

1. 310-326 RISER CAN BE USED IN PLACE OF REF. #14 FOR INSTALLATIONS WHERE IT IS DESIRABLE TO MOUNT THE HOPPER ASSEMBLY CLOSER TO THE FLUID TANK.

NOTE:

02

ID0159819

30

HOPPER INSTALLATION FM13X

11 3 12

1

10

9

2

13

3

10 7

5 4 6

SEE FOOTNOTE 1

8

9

03

ID0458979

31

HOPPER INSTALLATION FM13X

REF PART NO. NUMBER

QTY

DESCRIPTION

1 110-250 2 WORM CLAMP (1.25" TO 2.125") 2 116-047 15 BULK HOSE (1-1/2",SOLD PER FT) 3 110-026 2 WORM CLAMP (1/2" TO 1-1/4") 4 514-161 1 S/O COUPLER (12N-12H) 5 120-073 1 SHUT-OFF (12NF-12NF) 6 153-197 1 STREET ELBOW (12N-12NF90) 7 114-021 1 NIPPLE (12N-3 1/2") 8 300-2726 1 MIXER BASE 9 106-386 6 FLG LOCKNUT (M8-1.25) 10 106-991 6 FLG LK SCREW (M8-1.25 X 20MM) 11 150-1411 1 SUCTION TUBE 12 115-374 36 BULK HOSE (3/4", SOLD PER 1") 13 300-2535 1 BRACKET

REMARKS

USE 1 @ 36"

NOT SHOWN:

FOOTNOTES:

1. 302-6325 FLANGE AND 302-6217 RISER CAN BE USED IN PLACE OF 362-6175 (IN 350-5443 VENTURI) FOR INSTALLATIONS WHERE IT IS DESIRABLE TO MOUNT THE HOPPER ASSEMBLY CLOSER TO THE FLUID TANK.

NOTE:

03

ID0458979

32

VENTURI (2" FLG) FM13X

4 5 1 2

8

3 4

5

5

4

6 5 4

9

02

7

ID0458990

33

VENTURI (2" FLG) FM13X

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9

1 S/O COUPLER (24N-24H) 1 -32FPT X -24FPT REDUCER 1 FLANGE (2" FLG-2" NPT) 4 FLANGE CLAMP (2") 4 GASKET (2") 1 VENTURI (2") 1 FLANGE (2" FLG-3" HSB) 1 TEE (2" FLG-2" FLG-3/4 NPT) 1 PLUG (12N, SQ)

155-188 157-300 302-6176 105-2167 105-2214 302-5153 302-6175 150-5755 115-167

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0458990

34

PLATFORM INSTALLATION FM13V, FM13X

3

1

2

4 02

ID0175142

35

PLATFORM INSTALLATION FM13V, FM13X REF PART NO. NUMBER

QTY

1 300-2534 2 300-2726 3 106-991 4 106-386

1 1 2 2

DESCRIPTION

REMARKS

PLATFORM MIXER BASE FLG LK SCREW (M8-1.25 X 20MM) FLG LOCKNUT (M8-1.25)

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0175142

36

ENGINE AND PUMP MOUNT(B&S) FM13X BEGINS WITH S/N DWPFM13XJN0002022

11

10

7 4

21

12 20 2

1

19 3 5

16

11

23 15

10 9 20

12

14

17

22

18 4 6

13 8

02

ID0702551

37

ENGINE AND PUMP MOUNT(B&S) FM13X BEGINS WITH S/N DWPFM13XJN0002022 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

1 2 FLG LOCKNUT (5/16-NC) 4 LOCK WASHER (3/8") 8 WASHER (3/8", TYPE A WIDE) 4 BOLT (3/8-NC X 1-1/2") 4 LOCKNUT(M10-1.50, CL 10, PRV TRQ) 4 SCREW (M10-1.50 X 45MM) 2 WORM CLAMP (1.25" TO 2.125") 1 NIPPLE (12N-3 1/2") 2 STREET ELBOW (24N-24NF90) 2 REDUCER (32N - 24NF) 2 ALL THREAD (24N) 15 BULK HOSE (1-1/2",SOLD PER 1") 2 BUMPER 1 SHUT-OFF (12NF-12NF) 1 CENTRIFUGAL PUMP 1 STREET ELBOW (12N-12NF90) 1 S/O COUPLER (24N-24H) 1 FHC ADAPTER (24-24N) 2 SHUT-OFF (24NF-24NF) 1 MANIFOLD 1 MIXER BASE 1 S/O ADAPTER (48N-48H)

105-003 105-072 105-118 105-156 105-894 105-996 110-250 114-021 114-031 115-087 115-263 116-047 116-525 120-073 149-979 153-197 155-188 155-204 159-790 300-2481 303-4561 514-168

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0702551

38

ENGINE AND PUMP MOUNT

FM13V, FM13X BEGINS WITH S/N: CMWFM13VAG0003097 ENDS W/ S/N DWPFM13XJN0002021

9

20

10 11

19 31 1

22 16

14 2

10

12

13

8

9 23 28 7

11 22

15

6

18

29

17

24 30

25

5

26

19 21 3

27

4 6

05

ID0411409

39

ENGINE AND PUMP MOUNT

FM13V, FM13X BEGINS WITH S/N: CMWFM13VAG0003097 ENDS W/ S/N DWPFM13XJN0002021 REF PART NO. NUMBER

QTY

DESCRIPTION

1 195-2449 1 ENGINE (HONDA GX390 (EL SHUTOFF, 10A) 2 149-979 1 CENTRIFUGAL PUMP 3 116-047 15 BULK HOSE (1-1/2",SOLD PER 1") 4 110-250 2 WORM CLAMP (1.25" TO 2.125") 5 300-2726 1 MIXER BASE 6 155-188 2 S/O COUPLER (24N-24H) 7 514-168 1 S/O ADAPTER (48N-48H) 8 154-487 1 ELBOW (48NF-48NF90) 9 115-087 2 REDUCER (32N - 24NF) 10 114-031 2 STREET ELBOW (24N-24NF90) 11 115-263 2 ALL THREAD (24N) 12 105-072 4 LOCK WASHER (3/8") 13 105-156 4 BOLT (3/8-NC X 1-1/2") 14 155-204 1 FHC ADAPTER (24-24N) 15 116-525 2 BUMPER 16 105-003 2 FLG LOCKNUT (5/16-NC) 17 153-197 1 STREET ELBOW (12N-12NF90) 18 114-021 1 NIPPLE (12N-3 1/2") 19 105-118 8 WASHER (3/8", TYPE A WIDE) 20 105-996 4 SCREW (M10-1.50 X 45MM) 21* 105-894 4 LOCKNUT(M10-1.50, CL 10, PRV TRQ) 22 159-790 2 SHUT-OFF (24NF-24NF) 23 120-073 1 SHUT-OFF (12NF-12NF) 24 155-265 1 REDUCER (48N-32NF) 25 115-295 1 ALL THREAD (32N-2") 26 120-059 1 SHUT-OFF (32NF-32NF) 27 159-181 1 FHC ADAPTER (40-32N) 28 115-299 1 NIPPLE (48N-3") 29 120-060 1 SHUT-OFF FULL PORT (48NF-48NF) 30 155-263 1 FHC ADAPTER (56-48N) 31 300-2481 1 MANIFOLD

REMARKS

SUPERCEDES 195-1605, SEE FOOTNOTE 3 TORQUE COUPLING BOLTS TO 25 FT-LBS

TORQUE TO 25 FT-LBS

SEE FOOTNOTE 1 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. 100-068 2" HOSE ADAPTER KIT CONSISTS OF REFERENCE NUMBERS 8, 24-27.

2. 100-067 3" HOSE ADAPTER KIT CONSISTS OF REFERENCE NUMBERS 8, 28-30.

3. ENGINE 195-1605 ENDS WITH S/N: CMWFM13VVG0003096

NOTE:

05

ID0411409

40

ENGINE AND PUMP MOUNT

FM13V ENDS WITH S/N: CMWFM13VAG0003097

28 6

29

5 1

7

3

8

26

9

2

5

19

6

4

7

21

25

16 22

24

8

11

20

23 10

12

17

13 14

18 27 15

03

ID0355654

41

ENGINE AND PUMP MOUNT

FM13V ENDS WITH S/N: CMWFM13VAG0003097 REF PART NO. NUMBER

QTY

1 195-1605 2 149-979 3 300-2481 4 300-2726 5 115-087 6 114-031 7 115-263 8 159-790 9 155-204 10 155-188 11 154-487 12 155-265 13 115-295 14 120-059 15 159-181 16 115-299 17 120-060 18 155-263 19 514-168 20 120-073 21 114-021 22 153-197 23 105-156 24 105-072 25 116-525 26 105-003 27 105-894 28 105-996 29 105-118

1 1 1 1 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 2 2 4 4 8

DESCRIPTION

ENGINE (HONDA GX390 11.7 HP, EL) CENTRIFUGAL PUMP MANIFOLD MIXER BASE REDUCER (32N - 24NF) STREET ELBOW (24N-24NF90) ALL THREAD (24N) SHUT-OFF (24NF-24NF) FHC ADAPTER (24-24N) S/O COUPLER (24N-24H) ELBOW (48NF-48NF90) REDUCER (48N-32NF) ALL THREAD (32N-2") SHUT-OFF (32NF-32NF) FHC ADAPTER (40-32N) NIPPLE (48N-3") SHUT-OFF FULL PORT (48NF-48NF) FHC ADAPTER (56-48N) S/O ADAPTER (48N-48H) SHUT-OFF (12NF-12NF) NIPPLE (12N-3 1/2") STREET ELBOW (12N-12NF90) BOLT (3/8-NC X 1-1/2") LOCK WASHER (3/8") BUMPER FLG LOCKNUT (5/16-NC) LOCKNUT(M10-1.50,PRV TRQ,10.9) SCREW (M10-1.50 X 45MM) WASHER (3/8")

REMARKS

SUPERSEEDES 195-1092, SEE FOOTNOTES 3 & 4 TORQUE COUPLING BOLTS TO 25 FT-LBS

SEE FOOTNOTE 1 SEE FOOTNOTE 2

TORQUE TO 25 FT-LBS

NOT SHOWN:

FOOTNOTES:

1. 100-068 2" HOSE ADAPTER KIT CONSISTS OF REFERENCE NUMBERS 11 - 15.

2. 100-067 3" HOSE ADAPTER KIT CONSISTS OF REFERENCE NUMBERS 11, 16 - 18.

3. ENGINE 195-1092 ENDS WITH S/N: CMWFM13VLB0001263 4. ENGINE 195-1605 BEGINS WITH S/N: CMWFM13VHB0001264

NOTE:

03

ID0355654

42

ENGINE AND PUMP MOUNT FM13V ENDS WITH S/N: CMWFM13V_____

28 6

29

5 1

7 8 3 9

26

2

5

19

6

11 20

4

7

21

25

22 16

8

24 23

12 17

10

13 18

14

27 15

03

ID0174869

43

ENGINE AND PUMP MOUNT FM13V ENDS WITH S/N: CMWFM13V_____ REF PART NO. NUMBER

QTY

1 195-1605 2 149-979 3 300-2481 4 300-2726 5 115-087 6 114-031 7 115-263 8 159-790 9 155-204 10 155-188 11 154-487 12 155-265 13 115-295 14 120-059 15 159-181 16 115-299 17 120-060 18 155-263 19 514-168 20 120-073 21 114-021 22 153-197 23 105-156 24 105-072 25 116-525 26 105-003 27 105-894 28 105-996 29 105-118

1 1 1 1 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 2 2 4 4 8

DESCRIPTION

ENGINE (HONDA GX390 11.7 HP, EL) CENTRIFUGAL PUMP MANIFOLD MIXER BASE REDUCER (32N - 24NF) STREET ELBOW (24N-24NF90) ALL THREAD (24N) SHUT-OFF (24NF-24NF) FHC ADAPTER (24-24N) S/O COUPLER (24N-24H) ELBOW (48NF-48NF90) REDUCER (48N-32NF) ALL THREAD (32N-2") SHUT-OFF (32NF-32NF) FHC ADAPTER (40-32N) NIPPLE (48N-3") SHUT-OFF (48NF-48NF) FHC ADAPTER (56-48N) S/O ADAPTER (48N-48H) SHUT-OFF (12NF-12NF) NIPPLE (12N-3 1/2") STREET ELBOW (12N-12NF90) BOLT (3/8-NC X 1-1/2") LOCK WASHER (3/8") BUMPER FLG LOCKNUT (5/16-NC) LOCKNUT(M10-1.50,PRV TRQ,10.9) SCREW (M10-1.50 X 45MM) WASHER (3/8")

REMARKS

SUPERSEEDES 195-1092, SEE FOOTNOTES 3 & 4 TORQUE COUPLING BOLTS TO 25 FT-LBS

SEE FOOTNOTE 1 SEE FOOTNOTE 2

TORQUE TO 25 FT-LBS

NOT SHOWN:

FOOTNOTES:

1. 100-068 2" HOSE ADAPTER KIT CONSISTS OF REFERENCE NUMBERS 12 - 15.

2. 100-067 3" HOSE ADAPTER KIT CONSISTS OF REFERENCE NUMBERS 16 - 18.

3. ENGINE 195-1092 ENDS WITH S/N: 4. ENGINE 195-1605 BEGINS WITH S/N:

NOTE:

03

ID0174869

44

FUEL TANK AND BATTERY MOUNT FM13V, FM13X BEGINS WITH S/N: CMWFM13VAG0003097

12 13 15 10

26 14 5 CONNECT UNDER AIR CLEANER 33 31 15

23

28

22

27

25 18

16

13

17

29 11

32 16

3

2 4

21 20

16 15

30

9

19

7 15

6

1

8

03

16

ID0474530

45

FUEL TANK AND BATTERY MOUNT FM13V, FM13X BEGINS WITH S/N: CMWFM13VAG0003097 REF PART NO. NUMBER

QTY

DESCRIPTION

1 300-2726 1 MIXER BASE 2 300-2772 1 BATTERY HOLD DOWN 3 106-551 4 CLIP NUT (M8-1.25) 4 116-789 5 RUBBER EDGE TRIM 1/8" (FT) 5 215-256 1 BATTERY (12V, 200 AMP) 6 270-2136 1 SERIAL NUMBER PLATE (3.5" X 2" X.020") 7 106-282 4 DRIVE RIVET (1/8" X 1/2"") 8 106-280 4 WASHER (1/8", ALUMINUM) 9 300-2472 1 TANK SUPPORT 10 300-2474 1 FUEL TANK BRACKET 11 300-2475 1 SUPPORT BRACKET 12 318-588 1 MANUAL COMPARTMENT 13 110-348 6 POP RIVET (3/16" X .664") 14 106-381 2 FLG LK SCREW (M8-1.25 X 25MM) 15 106-991 13 FLG LK SCREW (M8-1.25 X 20MM) 16 106-386 11 FLG LOCKNUT (M8-1.25) 17 362-1478 1 FUEL TANK 18 300-2711 1 BRACE 19 110-249 1 WORM CLAMP (1/4" TO 5/8") 20 156-064 1 S/O SHUT-OFF (02N-03H90) 21 150-3002 1 BRASS BUSHING (04N-02NF) 22 105-1557 1 GROMMET 23 362-1530 1 SLOSH VALVE 25 362-1176 1 FUEL CAP COVER BASE 26 362-1175 1 FUEL CAP COVER 27 110-239 1 LANYARD CABLE (13.5") 28 362-2263 1 FUEL CAP (RATCHET 3.50") w/CV 29 110-259 1 BOLT-ON CLAMP (.625") 30 362-2267 1 S/O COUPLER (03H-03H90) 31 105-1516 22 BULK HOSE (3/16") LOW PERM 32 105-1516 2 BULK HOSE (3/16") LOW PERM 33 310-343 4 SPRING CLAMP

REMARKS

USE ONE @ 5", USE LOCTITE 401 OBSOLETE. USE 140-2076.

SEE FOOTNOTE 1.

USE ONE @ 21.5" USE ONE @ 1.5" ENSURE TABS DO NOT CONTACT OTHER HOSES

NOT SHOWN:

FOOTNOTES:

1. WHEN REPLACING 362-1478 FUEL TANK ON UNITS BEFORE CMW13VJ90000926, ORDER 105-1572 GROMMET PLUG, TO PLUG HOLE WHERE 362-1530 SLOSH VALVE WOUOLD GO ON LATER UNITS.

NOTE:

03

ID0474530

46

FUEL TANK AND BATTERY MOUNT (B&S) BEGINS W/ S/N DWPFM13XJN0002022

35

17

28

13

19 8 39

36

24

23

38

21 37 32 30 25

2

5

14 15 4

34

7

20 12 26 22

13

1 41 3

16

18

31

40

29

27

6 11

33

04

10

10 9

ID0702606

47

FUEL TANK AND BATTERY MOUNT (B&S) BEGINS W/ S/N DWPFM13XJN0002022 REF PART NO. NUMBER

QTY

1 105-1516 2 105-1517 3 105-1517 4 105-1517 5 105-215 6 105-688 7 106-273 8 106-381 9 106-385 10 106-386 11 106-388 12 106-551 13 106-991 14 110-239 15 110-249 16 110-259 17 110-348 18 118-343 19 140-2076 20 150-3002 21 150-5172 22 150-7178 23 155-120 24 195-2861 25 215-1863 26 217-819 27 300-10427 28 300-2474 29 300-2711 30 301-8839 31 303-4557 32 303-4558 33 303-4561 34 310-343 35 318-588 36 362-1175 37 362-1176 38 362-2263 39 362-2884 40 362-2996 41 500-3581

2 BULK HOSE (3/16") LOW PERM 26 BULK HOSE (1/4") LOW PERM 8 BULK HOSE (1/4") LOW PERM 3 BULK HOSE (1/4") LOW PERM 2 NUT (#6-32) 2 SCREW (M6-1.00 X 35MM) 2 SCREW (#6-32 X 5/8" FLT BRASS) 2 FLG LK SCREW (M8-1.25 X 25MM) 2 FLG LOCKNUT (M6-1.00) 16 FLG LOCKNUT (M8-1.25) 2 WASHER (M6) 2 CLIP NUT (M8-1.25) 16 FLG LK SCREW (M8-1.25 X 20MM, CL8.8 NLK) 1 LANYARD CABLE (13.5") 4 WORM CLAMP (1/4" TO 5/8") 1 BOLT-ON CLAMP (.625") 6 POP RIVET (3/16" X .664") 2 SPRING CLAMP (.580 TO .660) 1 BATTERY [230 CCA, WET] 1 BRASS BUSHING (04N-02NF) 1 FITTING - ANTI-SIPHON (04N-04H) 1 S/O SHUT-OFF (02N-04H90) 1 STREET ELBOW (04N-04NF90) 1 FUEL GAUGE, 12" THREAD IN 1 TACHOMETER/HOURMETER 1 BATTERY DISCONNECT SWITCH 1 SHEET, FM13X BATTERY DISCONNECT MOUNT 1 FUEL TANK BRACKET 1 BRACE 1 HOUR METER MOUNT PLATE 1 TANK SUPPORT 1 SUPPORT BRACKET 1 MIXER BASE 2 SPRING CLAMP 1 MANUAL COMPARTMENT 1 FUEL CAP COVER 1 FUEL CAP COVER BASE 1 FUEL CAP (RATCHET 3.50") w/CV 1 FUEL TANK 1 S/O COUPLER (03H-04H90) 1 FILTER, FUEL INLINE (-04)

DESCRIPTION

REMARKS

303-4559 IS OBSOLETED & SUPERSEDED BY 300-10427

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0702606

48

FUEL TANK AND BATTERY MOUNT

11

BEGINS WITH S/N: CMWFM13VAG0003097 ENDS W/ S/N DWPFM13XJN0002021

12 14

9

29

13

21

30 CONNECT UNDER AIR CLEANER

23

20

28

22

34 33

24 14

31

25 15

16

2

27 26

2

14

1

19

3

18

8

32 15

17

6 5 10 4

14

7 15

05

ID0571286

49

FUEL TANK AND BATTERY MOUNT BEGINS WITH S/N: CMWFM13VAG0003097 ENDS W/ S/N DWPFM13XJN0002021 REF PART NO. NUMBER

QTY

DESCRIPTION

1 300-2772 1 BATTERY HOLD DOWN 2 106-551 4 CLIP NUT (M8-1.25) 3 116-789 5 RUBBER EDGE TRIM 1/8" (FT) 4 300-2726 1 MIXER BASE 5 270-2136 1 SERIAL NUMBER PLATE (3.5" X 2" X.020") 6 106-282 4 DRIVE RIVET (1/8" X 1/2"") 7 106-280 4 WASHER (1/8", ALUMINUM) 8 300-2472 1 TANK SUPPORT 9 300-2474 1 FUEL TANK BRACKET 10 300-2475 1 SUPPORT BRACKET 11 318-588 1 MANUAL COMPARTMENT 12 110-348 6 POP RIVET (3/16" X .664") 13 106-381 2 FLG LK SCREW (M8-1.25 X 25MM) 14 106-991 13 FLG LK SCREW (M8-1.25 X 20MM) 15 106-386 11 FLG LOCKNUT (M8-1.25) 16 300-2711 1 BRACE 17 110-249 1 WORM CLAMP (1/4" TO 5/8") 18 156-064 1 S/O SHUT-OFF (02N-03H90) 19 150-3002 1 BRASS BUSHING (04N-02NF) 20 362-1176 1 FUEL CAP COVER BASE 21 362-1175 1 FUEL CAP COVER 22 110-239 1 LANYARD CABLE (13.5") 23 362-2263 1 FUEL CAP (RATCHET 3.50") w/CV 24 110-259 1 BOLT-ON CLAMP (.625") 25 105-1517 26 BULK HOSE (1/4") LOW PERM 26 105-1516 2 BULK HOSE (3/16") LOW PERM 27 310-343 2 SPRING CLAMP 28 362-2884 1 FUEL TANK 29 155-120 1 STREET ELBOW (04N-04NF90) 30 150-5172 1 FITTING - ANTI-SIPHON (04N-04H) 31 195-2861 1 FUEL GAUGE, 12" THREAD IN 32 362-2996 1 S/O COUPLER (03H-04H90) 33 118-343 2 SPRING CLAMP (.580 TO .660) 34 215-256 1 BATTERY (12V, 200 AMP)

REMARKS

USE ONE @ 5", USE LOCTITE 401

USE ONE @ 26" USE ONE @ 1.5" ENSURE TABS DO NOT CONTACT OTHER HOSES

APPLY OIL TO O-RING AND TORQUE TO 115-125 INLB. SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

TO REPLACE FUEL GAUGE USE TORQUE TOOL 303-2327 . TORQUE WRENCH MUST BE INSTALLED IN TOOL SOCKET AT 90 DEGREE TO OFFSET. INSTALLING TORQUE WRENCH IN OFFSET TOOL INLINE WITH OFFSET WILL INCREASE THE FINAL TORQUE ON THE FUEL GAUGE AND CAUSE DAMAGE.

NOTE:

05

ID0571286

50

FUEL TANK AND BATTERY MOUNT FM13V BEGINS WITH S/N: , ENDS WITH S/N:

16 17

18

21

20

22

19

43

13

15 14 44

23 8

42

25 4

24

7 11 12

26 6

5

9

3 36

2

10

41

27 37

35

31

40

38

29 39

28

30 TO FUEL LINE ON ENGINE

32

1

1.8

16

.9

40

34 33 06

ID0229065

51

FUEL TANK AND BATTERY MOUNT FM13V BEGINS WITH S/N: , ENDS WITH S/N: REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

1 MIXER BASE 2 POP RIVET (3/16" X 1/2", ALUM) 1 ACCESSORY SOCKET 1 PAD 1 PANEL 1 IGNITION SWITCH (GROUNDED) 4 FLG LK SCREW (M6-1.00 X 20MM) 1 COVER 1 TACHOMETER 2 SCREW (#6-32 X 5/8" FLT BRASS) 2 NUT (#6-32) 2 LOCK WASHER (#10) 1 SUPPORT BRACKET 1 BATTERY HOLD DOWN 1 FUEL TANK BRACKET 14 FLG LK SCREW (M8-1.25 X 20MM) 1 ROLL PIN (1/8" X 5/8") 1 FUEL CAP LOCK 1 PIN (9.5MM X 45MM) 1 SNAPPER PIN (3/8" X 1-1/2") 1 MANUAL COMPARTMENT 4 POP RIVET (3/16" X .664") 2 FLG LK SCREW (M8-1.25 X 25MM) 4 CLIP NUT (M8-1.25) 5 RUBBER EDGE TRIM 1/8" (FT) 1 FUEL CAP 1 FUEL TANK 1 WORM CLAMP (1/4" TO 5/8") 1 BATTERY DISCONNECT SWITCH 1 TANK SUPPORT 1 BRACE 1 SERIAL NUMBER PLATE (3.5" X 2" X.020") 12 FLG LOCKNUT (M8-1.25) 4 WASHER (1/8", ALUMINUM) 1 MALE TERMINAL (BULLET, .156) 1 FMC TERMINAL (1/4") 14-16GA 1 BRASS BUSHING (04N-02NF) 1 S/O SHUT-OFF (02N-03H90) 1 VOLTAGE REGULATOR (12V) 1 FLG LOCKNUT (M6-1.00) 1 SCREW (M6-1.00 X 45MM) 1 SCREW (M4-0.70 X 16MM) 1 NUT (M4-.70) 1 BATTERY [230 CCA, WET]

300-2726 110-560 214-253 300-4473 300-5719 215-1282 106-379 300-2770 214-519 106-273 105-215 195-418 300-2475 300-2772 300-3342 106-991 105-535 364-1003 183-978 110-368 318-588 110-348 106-381 106-551 116-789 364-698 364-1000 110-249 217-819 300-2472 300-2711 270-2136 106-386 106-280 213-074 215-872 150-3002 156-064 213-198 106-385 106-093 106-888 106-557 140-2076

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SUPERSEDED WITH 215-1863, SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2

USE 1 @ 5", LOCTITE 401 USE 1 @ 5", LOCTITE 401

NOT SHOWN:

300-5962 AR SPACER PLATE 106-859 2 SCREW (M4-0.70 X 12MM) 217-710 1 MICRO RELAY (SPDT) FOOTNOTES:

1. IGNITION SWITCH (215-1282) INCLUDES KEYS, 214-961 & SWITCH MOUNTING NUT, 214-962.

2. REPLACED WITH 190-1790 TACHOMETER/HOUR METER KIT NOTE:

06

ID0229065

52

FUEL TANK AND BATTERY MOUNT FM13V ENDS WITH S/N CMWFM13VK90000925

17 19

18

22

21

23

20 16 15 14

27 24

8

26 40

25

7 12 13

28 4 3

6

5

9 10 39

2

9

11

45 44

34

29 41

46

42

32 43

35

31

33

37

TO FUEL LINE ON ENGINE

30 36

1

1.8

16

.9

40

38 37 09

ID0159560

53

FUEL TANK AND BATTERY MOUNT FM13V ENDS WITH S/N CMWFM13VK90000925 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

1 MIXER BASE 2 POP RIVET (3/16" X 1/2", ALUM) 1 ACCESSORY SOCKET 1 KEY 1 PANEL 1 IGNITION SWITCH 4 FLG LK SCREW (M6-1.00 X 20MM) 1 COVER 2 BOLT (#10-32 X 5/16", PAN SLT) 1 TACHOMETER 2 SCREW (#6-32 X 5/8" FLT BRASS) 2 NUT (#6-32) 2 LOCK WASHER (#10) 1 SUPPORT BRACKET 1 BATTERY HOLD DOWN 1 FUEL TANK BRACKET 14 FLG LK SCREW (M8-1.25 X 20MM) 1 ROLL PIN (1/8" X 5/8") 1 FUEL CAP LOCK 1 PIN (9.5MM X 45MM) 1 SNAPPER PIN (3/8" X 1-1/2") 1 MANUAL COMPARTMENT 4 POP RIVET (3/16" X .664") 2 FLG LK SCREW (M8-1.25 X 25MM) 4 CLIP NUT (M8-1.25) 5 RUBBER EDGE TRIM 1/8" (FT) 1 BATTERY (12V, 200 AMP) 1 FUEL CAP 1 FUEL TANK 1 SPACER PLATE 1 WORM CLAMP (1/4" TO 5/8") 1 BATTERY DISCONNECT SWITCH 1 TANK SUPPORT 1 BRACE 4 DRIVE RIVET (1/8" X 1/2"") 1 SERIAL NUMBER PLATE (3.5" X 2" X.020") 12 FLG LOCKNUT (M8-1.25) 4 WASHER (1/8", ALUMINUM) 2 RING TERMINAL (#10) 1 PAD 1 BRASS BUSHING (04N-02NF) 1 S/O SHUT-OFF (02N-03H90) 1 VOLTAGE REGULATOR (12V) 1 FLG LOCKNUT (M6-1.00) 1 SCREW (M6-1.00 X 45MM) 2 SCREW (M4-0.70 X 12MM)

300-2726 110-560 214-253 215-020 300-3605 215-164 106-379 300-2770 105-154 214-519 106-273 105-215 195-418 300-2475 300-2772 300-3342 106-991 105-535 364-1003 183-978 110-368 318-588 110-348 106-381 106-551 116-789 215-256 364-698 364-1000 300-5962 110-249 217-819 300-2472 300-2711 106-282 270-2136 106-386 106-280 215-476 300-4473 150-3002 156-064 213-198 106-385 106-093 106-859

DESCRIPTION

REMARKS

SUPERSEDED WITH 215-1863, SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

USE 1 @ 5", LOCTITE 401

NOT SHOWN:

FOOTNOTES:

1. REPLACED WITH 190-1790 TACHOMETER/HOURMETER KIT

NOTE:

09

ID0159560

54

ELECTRICAL CONNECTIONS

FM13V, FM13X BEGINS WITH S/N: CMW13FMVAG0003097

10 6

5 4 7

9

11

2 3

8

1

02

ID0411207

55

ELECTRICAL CONNECTIONS

FM13V, FM13X BEGINS WITH S/N: CMW13FMVAG0003097 REF PART NO. NUMBER

QTY

1 217-819 2 215-1863 3 106-273 4 195-418 5 105-215 6 106-991 7 300-2772 8 106-551 9 116-789 10 301-8839 11 106-386

1 BATTERY DISCONNECT SWITCH 1 TACHOMETER/HOURMETER 2 SCREW (#6-32 X 5/8" FLT BRASS) 2 LOCK WASHER (#10) 2 NUT (#6-32) 4 FLG LK SCREW (M8-1.25 X 20MM) 1 BATTERY HOLD DOWN 2 CLIP NUT (M8-1.25) 5 RUBBER EDGE TRIM 1/8" (FT) 1 HOUR METER MOUNT PLATE 2 FLG LOCKNUT (M8-1.25)

DESCRIPTION

REMARKS

SUPERSEDES 214-519

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0411207

56

ELECTRICAL CONNECTIONS

FM13V BEGINS WITH S/N: CMWFM13VJ90000926; ENDS WITH S/N: CMWFM13VVG0003096

22 23 5

1

15 16

19

19

11

14 18

17

13 24

21 9 20 4

04

3

2

8 7

6

12

10

ID0358129

57

ELECTRICAL CONNECTIONS

FM13V BEGINS WITH S/N: CMWFM13VJ90000926; ENDS WITH S/N: CMWFM13VVG0003096 REF PART NO. NUMBER

QTY

1 300-2770 2 300-5718 3* 214-253 4 110-560 5 106-379 6 217-710 7 106-888 8 106-557 9 217-819 10 213-198 11 106-093 12 106-385 13 106-574 14 106-386 15 215-1863 16 106-273 17 195-418 18 105-215 19 106-991 20 213-074 21 215-872 22 300-2772 23 106-551 24 215-2013

1 COVER 1 PANEL 1 ACCESSORY SOCKET 2 POP RIVET (3/16" X 1/2", ALUM) 4 FLG LK SCREW (M6-1.00 X 20MM) 1 MICRO RELAY (SPDT) 1 SCREW (M4-0.70 X 16MM) 1 NUT (M4-.70) 1 BATTERY DISCONNECT SWITCH 1 VOLTAGE REGULATOR (12V) 1 SCREW (M6-1.00 X 45MM) 1 FLG LOCKNUT (M6-1.00) 3 CLIP NUT (M6-1.00) 2 FLG LOCKNUT (M8-1.25) 1 TACHOMETER/HOURMETER 2 SCREW (#6-32 X 5/8" FLT BRASS) 2 LOCK WASHER (#10) 2 NUT (#6-32) 4 FLG LK SCREW (M8-1.25 X 20MM) 1 MALE TERMINAL (BULLET, .156) 1 FMC TERMINAL (1/4") 14-16GA 1 BATTERY HOLD DOWN 2 CLIP NUT (M8-1.25) 1 IGNITION SWITCH

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SUPERSEDES 214-519

BEGINS WITH S/N: CMW____. SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. IGNITION SWITCH (215-1282) INCLUDES KEYS, 214-961 & SWITCH MOUNTING NUT, 214-962.

2. USE REPLACEMENT KEY 105-1790 & 105-1791 BLK BOOT, KEY COVER

NOTE:

04

ID0358129

58

BATTERY & CABLES (B&S)

1

8

6

7

5

10

11 2

4 3 15

14 9 13 12 01

ID0702645

59

BATTERY & CABLES (B&S) REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

2 FLG NUT (M6-1.00) 2 FLG LK SCREW (M8-1.25 X 25MM) 2 FLG LOCKNUT (M6-1.00) 2 FLG LOCKNUT (M8-1.25) 2 FLG SCREW (M6-1.00 X 16MM) 1 CABLE TIE (1/16" TO 11/4") 1 BOLT-ON CLAMP (1") 1 BATTERY [230 CCA, WET] 1 BATTERY JUMPER TERMINAL (RED) 1 BATTERY CABLE (6GA X 37", RED) 1 BATTERY CABLE (6 GA X 35", RED) 1 BATTERY CABLE (6GA X 40", BLK) 1 BATTERY CABLE (6GA X 26", BLACK) 1 BATTERY DISCONNECT SWITCH 1 JUMP TERMINAL BRACKET

106-353 106-381 106-385 106-386 106-712 110-248 110-333 140-2076 211-087 215-0033 215-1152 215-3351 215-3352 217-819 301-8849

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0702645

60

BATTERY & CABLES (VANGUARD) FM13X

2

10 14

1

1

6

5 12

3

7 8

13

3 11 4

9

01

ID0734032

61

BATTERY & CABLES (VANGUARD) FM13X

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14

2 FLG SCREW (M6-1.00 X 16MM) 2 FLG NUT (M6-1.00) 2 FLG LK SCREW (M8-1.25 X 25MM) 2 FLG LOCKNUT (M8-1.25) 1 BATTERY DISCONNECT SWITCH 2 CABLE TIE (1/16" TO 11/4") 1 BOLT-ON CLAMP (1") 1 JUMP TERMINAL BRACKET 1 BATTERY JUMPER TERMINAL (RED) 1 BATTERY [230 CCA, WET] 1 BATTERY CABLE (6GA X 26", BLACK) 1 BATTERY CABLE (6GA X 40", BLK) 1 BATTERY CABLE (6 GA X 35", RED) 1 BATTERY CABLE (6GA X 37", RED)

106-712 106-353 106-381 106-386 217-819 110-248 110-333 301-8849 211-087 140-2076 215-3352 215-3351 215-1152 215-0033

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0734032

62

BATTERY & CABLES

FM13V, FM13X ENDS W/ S/N DWPFM13XJN0002021

1

19

1 4

2 5 12 3 8

15 14 3 2 14 13

9

7

16 18 14

17 16

6 11 10

06

ID0349249

63

BATTERY & CABLES

FM13V, FM13X ENDS W/ S/N DWPFM13XJN0002021 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

2 FLG NUT (M6-1.00) 2 FLG LK SCREW (M8-1.25 X 25MM) 2 FLG SCREW (M6-1.00 X 16MM) 1 CABLE TIE (1/16" TO 11/4") 1 BOLT-ON CLAMP (1") 1 BATTERY CABLE (6 GA X 35", RED) 1 BATTERY CABLE (6 GA X 10", BLK) 1 BATTERY CABLE (6 GA X 31", BLK) 1 BATTERY DISCONNECT SWITCH 1 BATTERY JUMPER TERMINAL (RED) 1 JUMP TERMINAL BRACKET 1 BATTERY CABLE (6GA X 37", RED) 1 SPACER 3 FLG LOCKNUT (M8-1.25) 1 FLG LK SCREW (M8-1.25 X 20MM) 3 FLG LOCKNUT (M6-1.00) 1 SCREW (M6-1.00 X 45MM) 2 SCREW (M6-1.00 X 25MM, BUT SOC) 1 BATTERY [230 CCA, WET]

106-353 106-381 106-712 110-248 110-333 215-1152 215-1155 215-1156 217-819 211-087 301-8849 215-0033 179-444 106-386 106-991 106-385 106-093 107-312 140-2076

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

1. CONTROL BOX COMES WITH ENGINE (HONDA GX390, EL SHUTOFF, 10A). ITEMS 15-21 USE3D WITH THIS ENGINE ONLY.

06

ID0349249

64

ENGINE

FM13V, FM13X BEGINS WITH S/N: CMWFM13VVAG0003097 ENDS W/ S/N DWPFM13XJN0002021

2

6 4 7 8 3 5

3

07

9

1

ID0411369

65

ENGINE

FM13V, FM13X BEGINS WITH S/N: CMWFM13VVAG0003097 ENDS W/ S/N DWPFM13XJN0002021 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

195-2449 195-192 105-1517 310-343 159-244 105-1516 155-150 155-107 195-1124

QTY

DESCRIPTION

1 ENGINE (HONDA GX390 (EL SHUTOFF, 10A)) 1 EXHAUST DEFLECTOR 4 BULK HOSE (1/4") LOW PERM 4 SPRING CLAMP 1 FUEL FILTER 9 BULK HOSE (3/16") LOW PERM 1 S/O COUPLER (02N-02H) 1 COUPLER (1/8NPTX1/4OD,STR) 1 FUEL SOLENOID VALVE

REMARKS

SUPERSEEDES 195-1605, SEE FOOTNOTES 2 USE 2 @ 2"

SEE FOOTNOTE 1

NOT SHOWN:

194-443 499-572 194-239 195-159 194-238 165-756 313-230 217-758 153-546 159-544 194-240 194-241 194-242 194-243

1 1 1 1 1 1 1 1 1 1 1 1 1 1

STARTER, ELECTRIC STARTER SOLENOID CARBURETOR (GX90) AIR FILTER ELEMENT MUFFLER EXHAUST GASKET MUFFLER HEAT SHIELD LOW OIL PRESSURE SWITCH CARBURETOR GASKET MUFFLER GASKET AIR FILTER COVER PRE CLEANER CASE PRE CLEANER CAP PRE CLEANER GUIDE

FOOTNOTES:

1. NEW PRODUCTION, REPLACES RECTANGULAR (195-1244) FUEL SOLENOID. 2. ENGINE 195-1605 ENDS WITH S/N: CMWFM13VVG0003096

NOTE:

07

ID0411369

66

ENGINE

FM13V ENDS WITH S/N: CMWFM13VVVG0003096

2

7

6

9 8

5 4 3

3

12

1

ID0175162

67

ENGINE

FM13V ENDS WITH S/N: CMWFM13VVVG0003096 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9

195-1605 195-192 105-1517 110-249 195-1140 105-1516 155-150 155-107 195-1124

QTY

DESCRIPTION

1 ENGINE (HONDA GX390 11.7 HP, EL) 1 EXHAUST DEFLECTOR 4 BULK HOSE (1/4") LOW PERM 3 WORM CLAMP (1/4" TO 5/8") 1 FUEL FILTER (04H-04H, IN-LINE) 9 BULK HOSE (3/16") LOW PERM 1 S/O COUPLER (02N-02H) 1 COUPLER (1/8NPTX1/4OD,STR) 1 FUEL SOLENOID VALVE

REMARKS

SUPERSEEDES 195-1092, SEE FOOTNOTES 2 & 3 USE 2 @ 2" FOR REPLACEMENT USE FUEL FILTER 159-244

SEE FOOTNOTE 1

NOT SHOWN:

194-443 499-572 194-239 195-159 194-238 165-756 313-230 217-758 153-546 153-545 194-240 194-241 194-242 194-243

1 1 1 1 1 1 1 1 1 1 1 1 1 1

STARTER, ELECTRIC STARTER SOLENOID CARBURETOR (GX90) AIR FILTER ELEMENT MUFFLER EXHAUST GASKET MUFFLER HEAT SHIELD LOW OIL PRESSURE SWITCH CARBURETOR GASKET MUFFLER GASKET AIR FILTER COVER PRE CLEANER CASE PRE CLEANER CAP PRE CLEANER GUIDE

FOOTNOTES:

1. NEW PRODUCTION, REPLACES RECTANGULAR (195-1244) FUEL SOLENOID. 2. ENGINE 195-1092 ENDS WITH S/N: CMWFM13VLB0001263 3. ENGINE 195-1605 BEGINS WITH S/N: CMWFM13VHB0001264

NOTE:

12

ID0175162

68

ROPE START ENGINE FM13V, FM13X

1 9 16 13

5

17

6

8

7

18 14

4 11

3

2

15

10

12

04

ID0354508

69

ROPE START ENGINE FM13V, FM13X REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

QTY

DESCRIPTION

106-386 4 FLG LOCKNUT (M8-1.25) 195-2190 1 ENGINE (HONDA GX390 11.7 HP RP W/O TANK) 105-1516 10 BULK HOSE (3/16") LOW PERM 500-2508 1 FUEL SHUTOFF VALVE 105-1517 4 BULK HOSE (1/4") LOW PERM 195-1140 1 FUEL FILTER (04H-04H, IN-LINE) 310-343 4 SPRING CLAMP 195-192 1 EXHAUST DEFLECTOR 110-249 2 WORM CLAMP (1/4" TO 5/8") 105-118 8 WASHER (3/8") 105-996 4 SCREW (M10-1.50 X 45MM) 105-894 4 LOCKNUT(M10-1.50,PRV TRQ,10.9) 301-8839 1 HOUR METER MOUNT PLATE 215-1863 1 TACHOMETER/HOURMETER 106-273 2 SCREW (#6-32 X 5/8" FLT BRASS) 195-418 2 LOCK WASHER (#10) 105-215 2 NUT (#6-32) 106-991 4 FLG LK SCREW (M8-1.25 X 20MM)

REMARKS

USE 2X @ 2"

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0354508

70

3" CENTRIFUGAL PUMP

FM13V, FM13X BEGINS WITH S/N: CMWFM13VTE0002505

2

3 4 5

8

1

6 9

19

20 21

22 23

25 26 27

24

18 26 12 13 11 7

16 17

10 4

5

14

15

26 18 13

04

ID0355659

71

3" CENTRIFUGAL PUMP

FM13V, FM13X BEGINS WITH S/N: CMWFM13VTE0002505

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

149-979 310-742 105-162 500-2010 500-2116 500-1225 500-2626 500-2625 153-423 191-110 310-746 157-285 499-396 115-152 500-2456 310-745 117-506 499-395 106-136 500-2627 500-2517 500-2628 500-2629 500-2516 115-157 105-053 105-072 500-2519

- CENTRIFUGAL PUMP 1 SHAFT CLAMP 2 BOLT (3/8-16 X 2.25) 1 ADAPTER 2 GASKET 2 O-RING, VITON 1 ADAPTER, PUMP 1 HOUSING, PUMP 1 RELIEF VALVE, 1/4 NPT 1 SEAL ASS'Y 1 IMPELLER 1 O-RING, VITON 1 DISCHARGE FLANGE 2 PLUG (12N, SQ FM) 2 SCREW (3/8-16 X 3/4) SS 1 WEAR PLATE 1 FLAPPER ASS'Y 1 SUCTION FLANGE 8 BOLT (3/8-16 X 1") 1 RESERVOIR, GREASE 1 O-RING, VITON 1 SPRING, GREASE 1 PISTON, GREASE 1 O-RING, VITON 1 PLUG (02N, SOC) 8 NUT (3/8"-NC) 16 LOCKWASHER (3/8") 6 STUD (3/8-16 X 2.89) SS

INCLUDES REF NO.'S 1-27

TORQUE TO 25 FT/LBS, ALTERNATING SEE FOOTNOTE 1

SEE FOOTNOTE 1 3/4" NPT

1/8" NPT

255-1018 AR PUMP SEAL GREASE

1. O-RINGS WILL ONLY FIT NEW STYLE PUMPS WITH O-RING GROOVE. 153-802 SQUARE GASKET, NOT SHOWN, WILL FIT NEW AND/OR OLD STYLE PUMPS.

04

ID0355659

72

3" CENTRIFUGAL PUMP

FM13V ENDS WITH S/N: CMWFM13VCE0002504

16 13

14 15 21

12

15

14 15

2 23

19

22

26 3 25

27

7

8 9

1

6

27 5

20

4 10

24

11 15 17

10

18

16

ID0175426

73

3" CENTRIFUGAL PUMP

FM13V ENDS WITH S/N: CMWFM13VCE0002504 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

149-979 164-022 499-396 153-802 499-395 117-506 310-746 310-745 364-555 115-129 115-130 153-423 310-742 105-162 105-053 105-072 106-136 153-558 107-730 115-012 107-750 500-2010 164-024 500-2116 107-749 191-110 157-285 500-1225

QTY

DESCRIPTION

- CENTRIFUGAL PUMP 1 PUMP CASE 1 DISCHARGE FLANGE 1 GASKET 1 INLET FLANGE 1 FLAPPER 1 IMPELLER (5.5") 1 WEAR PLATE 1 GREASE RESERVOIR 2 ALL THREAD (04N) SCH 80 1 TEE (04NF-04NF-04NF) 1 RELIEF VALVE 2 SHAFT CLAMP 2 BOLT (3/8-NC X 2-1/4") 8 NUT (3/8 NC) HEX 16 LOCK WASHER (3/8") 8 BOLT (3/8-NC X 1") 2 ANNULAR GASKET 2 ACORN NUT (3/8-NC) 1 ZERK (04N) 2 BOLT (3/8-NC x 1.25", CSK SLT) 1 ENGINE ADAPTER 1 IMPELLER HOUSING 2 GASKET 6 3/8-16 THREADED STUD 1 SEAL KIT 1 O-RING (238 D75 VITON) 2 O-RING (5.737 ID, VITON)

REMARKS

INCLUDES REF NO.'S 1-24 OLD STYLE, SEE FOOTNOTE 1

INCLUDES REF NO.'S 13-15 TORQUE TO 25 FT/LBS, ALTERNATING TORQUE TO 25 FT/LBS, ALTERNATING SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2

INCLUDES REF NO. 3 & 23 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

255-1018 AR PUMP SEAL GREASE

FOOTNOTES:

1. O-RINGS WILL ONLY FIT NEW STYLE PUMPS WITH O-RING GROOVE. 153-802 SQUARE GASKET WILL FIT NEW AND/OR OLD STYLE PUMPS. 2. NEWER STYLE PUMPS USE SHORTER REPLACEMENT BOLT 500-2456 AND DO NOT REQUIRE ANNULAR GASKET OR ACORN NUT.

NOTE:

10

ID0175426

74

TANK PLUMBING 400 GAL TANK

4 3

15 5

19

21 SEE FOOTNOTE 3

20

2 11

14

1

7 SEE F

OO

8 10

TNO TE

19

9

2

17 12

18

SEE F

OO

18 TNO TE

6 1

13

11 SEE FOO 19 TNO TE

07

19

13

18

17

16 2

ID0501360

75

TANK PLUMBING 400 GAL TANK REF PART NO. NUMBER

QTY

362-2331 1 362-0097 2 357-261 3 364-434 4 357-263 5 108-072 6 369-810 7 514-215 8 159-863 9 116-094 10 110-353 11 153-596 12 153-708 13 315-489 14 302-9658 15 156-939 16 153-721 17 362-1258 18 157-490 19 153-549 20 150-1405 21 302-9563

TANK CAP ASSEMBLY 1 FLUID TANK, 400 GAL - FILLWELL (16") - TANK CAP (16", VENTED) - TANK CAP (4") 8 SCREW (#10-16 X 1.25", PAN PLPS) 2 MIXING JET (16N,ORF.500", NY) 2 S/O COUPLER (16N-16H90) 1 S/O TEE (16H-16H-16H) 8 BULK HOSE (1", SOLD PER 1") 4 WORM CLAMP (3/4" TO 1-1/2") 3 ADAPTER (48NF-48W, ABS) 1 ELBOW (48WF-48WF90, ABS) 2 PIPE (-48 X 3.00", ABS) 1 PIPE (-48 X 67.5" ABS) 1 PLUG (48N) 2 PLUG (16N POLY) 2 PLASTIC PLUG 4 BK CONNECTOR (16NF POLY) 3 BK CONNECTOR (48NF-48NF, NYL) 1 TEE (48WF-48WF-48WF90, ABS) 1 PIPE (-48 X 6.00", ABS)

DESCRIPTION

REMARKS

INCLUDES REF NO'S: 2, 3, 4, & 5

INCLUDES REF NO'S: 4

USE 2 @ 4.00"

SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1. 4X CUT 2.12" DIAMETER HOLE CENTERED ON DIMPLE IN TANK. 2. 3X CUT 4.50" DIAMETER HOLE CENTERED ON DIMPLE IN TANK. 3. GLUE THIS END ONLY TO REF 20 -- DO NOT GLUE TO REF 11.

NOTE:

07

ID0501360

76

TANK FILL PLUMBING 400 GAL TANK

6

5 4

3

7

8

1

14

2

13 9 11

12

10

13

02

ID0543948

77

TANK FILL PLUMBING 400 GAL TANK

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

QTY

DESCRIPTION

350-3361 400G TANK FILL ASSY 106-380 6 FLG LK SCREW (M8-1.25 X 16MM) 105-003 8 FLG LOCKNUT (5/16-NC) 302-9663 2 FILL TUBE MOUNT 150-5711 1 TUBE (2") 195-910 2 U-BOLT (5/16-NC X 2") 110-134 2 WORM CLAMP (2.062" TO 2.750") 116-505 75 BULK HOSE (2", SOLD PER FT) 196-009 1 U-BOLT CLAMP (2.500") 300-2750 1 BRACKET 149-119 1 FHC ADAPTER (32-32H) 105-245 4 SCREW (M10-1.50 X 25MM) 302-9662 1 BRACKET 106-387 4 FLG LOCKNUT (M10-1.50) 302-9664 1 MOUNT

REMARKS

INCLUDES REF NO'S: 1-14

USE 1 @ 75"

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0543948

78

HOSE ROUTING

400 GAL FM13X HOSE KIT

4 5 9 16 9 15 6 4 17

10

14

11

12

7

9

8 3 2

02

13

18

1

6

ID0566867

79

HOSE ROUTING

400 GAL FM13X HOSE KIT REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

QTY

DESCRIPTION

900-0133 HOSE & FITTINGS KIT 155-188 1 S/O COUPLER (24N-24H) 150-1628 1 ELBOW (24NF-24NF90, POLY) 150-1683 1 S/O COUPLER (24N-16H) 114-017 2 STREET ELBOW (48N-48NF90) 514-168 1 S/O ADAPTER (48N-48H) 110-250 2 WORM CLAMP (1.25" TO 2.125") 110-353 2 WORM CLAMP (3/4" TO 1-1/2") 116-094 8 BULK HOSE (1", SOLD PER 1") 110-169 4 WORM CLAMP (2.812" TO 3.750") 120-060 1 SHUT-OFF FULL PORT (48NF-48NF) 115-300 2 NIPPLE (48N-4") 154-487 1 ELBOW (48NF-48NF90) 155-263 1 FHC ADAPTER (56-48N) 116-588 180 BULK HOSE (1-1/2", SOLD PER FT) 155-205 1 FHC BODY (24-24H) 116-506 96 BULK HOSE (3", SOLD PER FT) 116-506 60 BULK HOSE (3", SOLD PER FT) 155-264 1 FHC BODY (56-48H)

REMARKS

INCLUDES REF NO'S: 1-18

USE 1 @ 8"

USE 1 @ 180" USE 1 @ 96" USE 1 @ 60"

NOT SHOWN:

FOOTNOTES:

NOTE:

1. USE APPROPRIATE LENGTH (M14-2.00, GRADE 12.9) BOLTS AND HARDWARE FOR MOUNTING TANK AND MIXING UNIT TO STRUCTURALLY SOUND COMPONENTS. 12X FOR MOUNTING TANK & 6X FOR MIXING UNIT. 2. REFER TO OPERATORS MANUAL FOR WEIGHTS AND CENTER OF GRAVITY LOCATION FOR COMPONENTS.

02

ID0566867

80

TANK BASE 400 GAL TANK

5

2

10

9

7

8

4

3

13

12 8

1

11 6 13

05

ID0544062

81

TANK BASE 400 GAL TANK REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13

QTY

DESCRIPTION

REMARKS

303-2279 2 TANK SUPPORT 302-9655 2 TANK SUPPORT 303-2280 2 END TANK SUPPORT 108-015 2 HHCS M14-2.0 X 35MM, 10.9, ZP 107-319 2 LOCKNUT (M14-2.0,PRV TRQ.10.9) 302-9659 4 THREADED BLOCK 302-9661 2 TIE STRAP 106-381 8 FLG LK SCREW (M8-1.25 X 25MM) 106-395 8 WASHER (M8, HARDENED) 107-096 8 LOCKNUT (M8-1.25, NLK) 302-9650 1 TANK BASE 303-2276 1 CENTER TANK SUPPORT TUBE 105-1808 16 FLG LK SCREW (M12-1.75 X 30mm)SERRATED

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0544062

82

500 GAL TANK & PLUMBING FM13V, FM13X

37 4

39 27 32

8

6 36

22

11 41

22

16

23

38 34

22

23 35

19

42

33

28

40

13

15 28 24 26

29

12

18

41

5

8

3 1 2

14 31 30 7 17 10 21

08

20

25

9

ID0174772

83

500 GAL TANK & PLUMBING FM13V, FM13X REF PART NO. NUMBER

QTY

1 105-059 2 105-273 3 106-709 4 107-319 5 108-015 6 108-072 7 110-134 8 110-169 9 110-250 10 110-353 11 114-017 12 115-299 13 116-094 14 116-094 15 116-506 16 116-506 17 116-047 18 120-060 19 150-1405 20 150-1628 21 150-1683 22 153-549 23 153-596 24 153-721 25 155-188 26 155-205 27 156-939 28 157-490 29 159-863 30 300-2575 31 300-2784 32 300-9815 33 313-259 34 314-882 35 315-489 36 357-261 37 357-263 38 364-1001 39 364-434 40 369-810 41 514-168 42 514-215

8 WASHER (7/16") 8 SCREW (M12-1.75 X 30MM) 8 FLG LK NUT (M12-1.75) 2 LOCKNUT (M14-2.0,PRV TRQ.10.9) 2 HHCS M14-2.0 X 35MM, 10.9, ZP 7 SCREW (#10-16 X 1.25", PAN PLPS) 2 WORM CLAMP (2.062" TO 2.750") 4 WORM CLAMP (2.812" TO 3.750") 2 WORM CLAMP (1.25" TO 2.125") 6 WORM CLAMP (3/4" TO 1-1/2") 1 STREET ELBOW (48N-48NF90) 1 NIPPLE (48N-3") 5 BULK HOSE (1", SOLD PER 1") 15 BULK HOSE (1" SOLD PER 1") 76 BULK HOSE (3", SOLD PER FT) 18 BULK HOSE (3", SOLD PER FT) 120 BULK HOSE (1-1/2", SOLD PER FT) 1 SHUT-OFF FULL PORT (48NF-48NF) 1 TEE (48WF-48WF-48WF90, ABS) 1 ELBOW (24NF-24NF90, POLY) 1 S/O COUPLER (24N-16H) 3 BK CONNECTOR (48NF-48NF, NYL) 2 ADAPTER (48NF-48W, ABS) 1 PLUG (16N POLY) 1 S/O COUPLER (24N-24H) 1 FHC BODY (24-24H) 1 PLUG (48N) 3 BK CONNECTOR (16NF POLY) 1 S/O TEE (16H-16H-16H) 1 TANK BASE 1 PIPE 2" PVC .154"W X 69.5" 4 TANK SUPPORT 1 SUCTION ELBOW 1 PIPE (-48 X 63.5" ABS) 1 PIPE (-48 X 3.00", ABS) 1 FILLWELL (16") 1 TANK CAP (4") 1 TANK (POLYETHYLENE, 500 GAL) 1 TANK CAP (16", VENTED) 2 MIXING JET (16N,ORF.500", NY) 2 S/O ADAPTER (48N-48H) 2 S/O COUPLER (16N-16H90)

DESCRIPTION

REMARKS

USE 2 @ 2.5"

GLUE ONE END ONLY TO REF 16 -- DO NOT GLUE TO REF 20.

GLUE ONE END ONLY TO REF 19 -- DO NOT GLUE TO REF 23

NOT SHOWN:

FOOTNOTES:

NOTE:

08

ID0174772

84

500 GALLON TANK FILL PLUMBING FM13V, FM25, FM13X, FM25X

6

1 4

11

5

3

6

2

5 9 7 12 10 9 8

04

ID0155642

85

500 GALLON TANK FILL PLUMBING FM13V, FM25, FM13X, FM25X REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12

QTY

DESCRIPTION

190-1189 - TANK FILL KIT, 500 GAL 300-2752 2 MOUNTING BRACKET 116-505 57 BULK HOSE (2", SOLD PER FT) 196-009 2 U-BOLT CLAMP (2.500") 300-2754 1 FILL PIPE 110-134 2 WORM CLAMP (2.062" TO 2.750") 106-654 4 SCREW (M10-1.50 X 16MM) 300-2750 1 BRACKET 106-387 4 FLG LOCKNUT (M10-1.50) 105-245 4 SCREW (M10-1.50 X 25MM) 315-491 1 BRACKET 106-390 4 WASHER (M10) 149-119 1 FHC ADAPTER (32-32H)

REMARKS

INCLUDES REF NO'S 1-12 USE 1 @ 57"

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0155642

86

950 GAL TANK ASSEMBLY FM13V, FM25, FM13X, FM25X

41

42 7 38

44

18

9

34

5

15 34 18

40

4

19

20

39

36

27

33

3

4

22

25 26

10 14

13

24

45

37

29

8 21 16

32 12

28

46

11

17

24 2

35 6

26

43 20

1 31 24 23 30

08

ID0174876

87

950 GAL TANK ASSEMBLY FM13V, FM25, FM13X, FM25X REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

4 SCREW (M10-1.50 X 20MM, 10.9) 8 SCREW (M12-1.75 X 40MM, 8.8) 10 FLG LOCKNUT (M10-1.50) 6 WASHER (M10) 4 SCREW (M10-1.50 X 16MM) 6 FLG LK NUT (M12-1.75) 2 LK BOLT (5/16-NC X 1", NLK) 6 SCREW (M10-1.50 X 140MM) 8 SCREW (#10-16 X 1.25", PAN PLPS) 6 WORM CLAMP (3/4" TO 1-1/2") 1 PLUG (32N, SQ, GALV) 9 BULK HOSE (1", SOLD PER 1") 7 BULK HOSE (1", SOLD PER 1") 9 BULK HOSE (1", SOLD PER 1") 1 BULK HOSE (3", SOLD PER FT) 1 FHC CONNECTOR (56-48NF) 1 MANIFOLD 2 BANJO FITTING (HB300) 1 ADAPTER (48FN-48W, ABS) 2 BK CONNECTOR (48NF-48NF, NYL) 1 ADAPTER (48NF-48W, ABS) 1 ST ELBOW, (48W-48WF90, ABS) 1 PLUG (16N POLY) 4 BK CONNECTOR (16NF POLY) 6 3/8" SPACER BUSHING 2 U-BOLT CLAMP (3") 1 PIPE (-48 X 49",ABS) 1 TANK (POLYETHYLENE, 950 GAL) 3 TANK STRAP 1 TANK BASE 2 MOUNTING BRACKET 2 BRACKE, PIPE SUPPORT 1 MOUNTING BRACKET 2 T-BOLT CLAMP (3") 1 SUCTION ELBOW 1 VENTURI MOUNT, LH 1 VENTURI MOUNT, RH 1 BAFFLE 1 RETAINER 1 FILLWELL (16") 1 TANK CAP (4") 1 TANK CAP (16", VENTED) 3 MIXING JET (16N,ORF.500", NY) 1 ST ELBOW, POLY (48NM-48NF90) 3 S/O COUPLER (16N-16H90) 3 S/O COUPLER (16N-16H)

105-274 106-333 106-387 106-390 106-654 106-709 107-240 107-420 108-072 110-353 114-008 116-094 116-094 116-094 116-506 149-955 149-971 150-4015 150-4016 153-549 153-596 153-635 153-721 157-490 178-858 196-010 301-6454 305-805 305-868 305-875 308-751 309-608 310-602 310-895 313-259 313-262 313-265 323-114 323-152 357-261 357-263 364-434 369-810 514-210 514-215 514-311

DESCRIPTION

REMARKS

USE 22 1/2"

INCLUDES REFERENCE NUMBERS 9, 40, 41, & 42

NOT SHOWN:

FOOTNOTES:

NOTE:

08

ID0174876

88

950 GAL TANK PLUMBING FM13V, FM13X

13 1 8

1 7 1 6

10

14

12 2

9

4

3

11

2

5 03

ID0174972

89

950 GAL TANK PLUMBING FM13V, FM13X REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14

4 WORM CLAMP (2.812" TO 3.750") 2 WORM CLAMP (1.25" TO 2.125") 1 REDUCER (32N - 24NF) 1 NIPPLE (32N-6") 1 ELBOW (32NF-32NF90) 1 NIPPLE (48N-3") 30 BULK HOSE (3", SOLD PER FT) 72 BULK HOSE (3", SOLD PER FT) 160 BULK HOSE (1-1/2", SOLD PER FT) 1 SHUT-OFF FULL PORT (48NF-48NF) 1 S/O COUPLER (24N-24H) 1 FHC BODY (24-24H) 1 FHC BODY (56-48H) 1 S/O ADAPTER (48N-48H)

110-169 110-250 115-087 115-050 115-293 115-299 116-506 116-506 116-047 120-060 155-188 155-205 155-264 514-168

DESCRIPTION

REMARKS

REPLACEMENT PART 499-400 LEVER REPLACEMENT PART 116-491 SQUARE RING REPLACEMENT PART 116-736 SQUARE RING

NOT SHOWN:

FOOTNOTES:

NOTE:

1. REFERENCE NUMBERS 1-14 ARE INCLUDED IN FM13V 1000 GALLON TANK SHIP KIT

03

ID0174972

90

FM50 TANK FILL PLUMBING 8

�- � I

13

1 4

9 �

8 -----1 �" �

,·

19

'('Jd

16

�� I 6 ({),

�

6

� I

11

e/J

15

�\ji'@J �� \10

11

11

1 ""� ..

I

----4

· /(j� 17 . x ·� \

D

18

808-054

91

92

ENGINE WIRING DIAGRAM FM13V, FM13X

02

ID0412262

93

ENGINE WIRING DIAGRAM FM13V, FM13X REF PART NO. NUMBER

N/A

QTY

195-2449 REF

DESCRIPTION

REMARKS

ENGINE (HONDA GX390 (EL SHUTOFF, 10A)

SEE NOTE 1.

NOT SHOWN:

FOOTNOTES:

NOTE:

1. REFERENCE HONDA TECHNICAL MANUAL PTR54179-A, FOR MORE INFORMATION

02

ID0412262

94

FM13V HARNESS

FM13V HARNESS ENDS WITH S/N: CMWFM13VVG0003096

MAIN FUSE F1

TO IGNITION SWITCH S2

CAP

RED/BLU (3)

ORG/GRN (5)

RED/BLU (3)

FUEL FUSE

RED (2) B

A

WHT/BLK (4)

1

BLK

-ABLK/YEL (6) ORG/BLK (11)

BLK/YEL (6)

03

TO FUEL SOLENOID L2

ID0176804

95

MAIN FUSE

FM13V HARNESS

FM13V HARNESS ENDS WITH S/N: CMWFM13VVG0003096

F1 CAP PC: 12033731 5 AMP FUSE

FUEL FUSE

RED/BLU (3)

B

RED/BLU (3)

S

WHT/BLK (4)

B

A

RED (2)

-AA

ORG/GRN (5)

1

M

BLK/YEL (6) ORG/BLK (11)

TO IGNITION SWITCH

TO FUEL SOLENOID

S2 L2 A M

RED

BLK

2

12V ACCESSORY SOCKET

E2

03

ID0176804

96

FM13V HARNESS

FM13V HARNESS ENDS WITH S/N: CMWFM13VVG0003096

HARNESS POWER

L1 RED (2)

BLK/YEL (6)

1

TO INGNITION COIL

G1 BLK/YEL (6)

-AWHT/BLK (4) WHT/BLK (4)

ORG/BLK (11)

WHT (9) ORG/GRN (5)

TO OIL LEVEL CAPACITOR

C1 TO STARTER SOLENOID

L1 DIODE/JUMPER CONNECTION

WHT (9)

D1

WHT (9)

TO VOLTAGE REGULATOR

VR1

03

ID0176804

97

98

ELECTRICAL SCHEMATIC

FM13V ENDS WITH S/N: CMWFM13VVG0003096

3 AMP CHARGE CIRCUIT B1

L1 STARTER SOLENOID

2

STARTER M MOTOR

START RELAY K1

3 P7 J7 BATTERY DISCONNECT

1

4

IGNITION SWITCH

BATTERY

4 MAIN FUSE

1 S1

12

BAT

15A

F1

ACC ST

3

BT1 12V 230CCA

S2

5 12

1

11

IGN

11

1 IGNITION COIL

5 ACC. SOCKET E2

J1

8

P1 G1 D1 DIODE

SPARK PLUG

P2

E1 J4

J2

J8 P8

P4

11

9 J5 P5

P9 J9 OIL LEVEL CAPACITOR

C1

OIL LEVEL SWITCH

VR1

P6

P3

J6

J3

7

FUEL SOLENOID L2

VOLTAGE REGULATOR

10

S3

G2

10

CHARGE COIL

ID0172854

99

ELECTRICAL SCHEMATIC

FM13V ENDS WITH S/N: CMWFM13VVG0003096

ELECTRICAL COMPONENTS Part # 194-443 140-2076 See Notes 214-301 217-811 See Notes See Notes See Notes See Notes See Notes See Notes See Notes See Notes See Notes See Notes 217-710 499-572 195-1124 See Notes See Notes See Notes See Notes See Notes See Notes See Notes

Component Starter Battery Oil Level Capacitor Spark Plug Accessory Socket Main Fuse Transistorized Ignition Coil Charge Coil (3A) Diode Connection Charge Coil Connection Ignition coil connection Oil Level Capacitor Connection Oil Level Switch Connection Start Connection

Start Relay Starter Solenoid Fuel Solenoid Diode Connection Charge Coil Connection Ignition coil connection Oil Level Capacitor Connection Oil Level switch Connection Start Connection Fuel Solenoid Connection

Notes 12V, 230 CCA No service Part Available

15A ATC No Service Parts Available No service Part Available, - 3 Amp Charge Circuit Only

Micro (SPDT)

Male Bullet .156

See Notes Voltage Regulator Connection 217-819 215-2013 215-1282 See Notes 213198

10

Battery Disconnect Ignition Switch Ignition Switch Oil Level Switch

Begins w/Sn: Part of Engine Male Bullet (yellow Wire) connects to female bullet on Voltage Regulator Connection engine charge coil

ID0172854

100

ELECTRICAL SCHEMATIC

FM13V ENDS WITH S/N: CMWFM13VVG0003096 red red/blu wht/blk org/grn n/a yel blk wht wht org/blk white

Battery Fused Battery Start Circuit Ignition Circuit Oil Level Switch to Oil Level Capacitor Spark Plug Wire Diode Anode to Voltage Regulator Voltage regulator to Charge Coil Diode Cathode to Fuel Solenoid Start Relay

ELECTRICAL HARNESS Part # 215-1610 215-2571 214-253

10

Qty. 1 1 1

Description FM13V HARNESS (ENDS WITH/Sn: FM13V, FM13X HARNESS (BEGINS WITH/Sn: Accessory Socket (Req's 1x - 215-872 Packard terminal, 1x 213-074 bullet)

ID0172854

101

102

UMBRELLA MOUNT FM13V, FM13X

8

1

2

3 4

03

5

7

6

ID0175199

103

UMBRELLA MOUNT FM13V, FM13X REF PART NO. NUMBER

1 2 3 4 5 6 7 8

190-1191 344-0001 500-1962 300-3184 105-621 322-362 111-026 106-381 106-386

QTY

1 1 1 4 2 2 2 2

DESCRIPTION

UMBRELLA KIT - FM13V UMBRELLA UMBRELLA POLE (16") UMBRELLA BRACKET WING BOLT (1/4-NC X 3") BACKUP SPACER BOLT-ON CLAMP (1-1/4", PAIR) FLG LK SCREW (M8-1.25 X 25MM) FLG LOCKNUT (M8-1.25)

REMARKS

INCLUDES REF. 2

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0175199

104

NOTES:

ID0134963

105

ACCESSORIES

106

FLUID MIXING ACCESSORIES

1 3 2

4

8 6

5

7

9

10

11

10

ID0109085

107

FLUID MIXING ACCESSORIES REF PART NO. NUMBER

QTY

DESCRIPTION

1. 259-195 2. 259-196 3. 259-804 4. 259-805 5. 259-807 6. 259-808 7. 259-809 8. 259-810 9. 259-821 10. 259-822 11. 259-832

1 1 AR AR AR AR AR AR AR AR AR

VISCOSITY FUNNEL VISCOSITY CUP BENTONITE, QUIK-GEL (50 LB) LIQUID POLYMER, EZ-MUD (5 GAL) BENTONITE, BORE-GEL (50 LB) VISCOSIFIER, LIQUI-TROL (5 GAL) POWDER POLYMER, QUIK-TROL (20 LB) WET AGENT, CON-DET (5 GAL) 'PAC-R' FILTRATION CONTROL 'BARAZAN D+' VISCOSIFIER 'NO SAG' (20# BOX/10-2#BAGS)

1 1

DRILLING FLUID TEST KIT SHEAROMETER

REMARKS

NOT SHOWN:

191-158 259-487

FOOTNOTES:

NOTE:

10

ID0109085

108

109

110

GARDEN HOSE ADAPTER

1 2 3

4

02

ID0091310

111

GARDEN HOSE ADAPTER REF PART NO. NUMBER

1 2 3 4

159-891 114-038 115-271 115-134 159-500

QTY

1 1 1 1

DESCRIPTION

GARDEN HOSE ADAPTER NIPPLE (12N-12NH) REDUCER (24N-12NF) COLLAR (24NF) FHC BODY (24-24N)

REMARKS

INCL. REF No's 1 - 4

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0091310

112

113

114

FLUID COUPLER ADAPTERS

(2")

2 1

(1.5") (3" x 2")

3

4

(3" x 1.5")

(1.5" x 2")

02

ID0114218

115

FLUID COUPLER ADAPTERS REF PART NO. NUMBER

1.

2.

3.

4.

QTY

191-226 1 159-485 1 157-300 1 159-500 1 157-792 1 116-736 157-793 1 116-736 150-1520 1 116-735 -

DESCRIPTION

REMARKS

FLUID COUPLER KIT FHC BODY (32-32N) FITTING FHC BODY (24-24N) FHC CPLR X ADPTR (48-32) SQUARE RING GASKET (48) FHC CPLR X ADPTR (48-24) SQUARE RING GASKET (48) FHC CPLR X ADPTR (32-24) GASKET (32)

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0114218

116

NOTES:

ID0134963

117

MISCELLANEOUS

118

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

119

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

120

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

121

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

122

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which are D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

123

124

Related Publications Component

Ass’y

P/N

Model: Fluid Mixers ........... Parts Manual .................................................................... .............. 053-478 Fluid Mixers ........... Operators Manual ............................................................ .............. 054-513 Fluid Mixers ........... Repair Guide (Service Manual) ....................................... .................. N/A Fluid Mixers ........... Supplementary Maint. Guide - Trenchless ...................... .............. 055-485 Fluid Mixers ........... Special Tools Guide ......................................................... .............. 052-901 Engine: MM5 Honda 5.5hp .......... Parts Manual - GX160K1TX .................................... 195-028 ...... 053-042 Honda 5.5hp .......... Operators Manual - GX160K1TX .................................... .................. N/A Honda 5.5hp .......... Service (Shop) Manual - GX160K1TX ............................. .................. N/A Lombardini 5.5hp ... Parts Manual - 15LD315K ....................................... 195-196 .......... N/A Lombardini 5.5hp ... Operators Manual - 15LD315K ........................................ .................. N/A Lombardini 5.5hp ... Service (Shop) Manual - 15LD315K ................................ .................. N/A MM9 Honda 9hp ............. Parts Manual - GX270PA2 ...................................... 195-194 .......... N/A Honda 9hp ............. Operators Manual - GX270PA2 ....................................... .................. N/A Honda 9hp ............. Service (Shop) Manual - GX270PA2 ............................... .................. N/A Lombardini 10hp .... Parts Manual - 6LD435 ............................................ 195-197 .......... N/A Lombardini 10hp .... Operators Manual - 6LD435 ............................................ .................. N/A Lombardini 10hp .... Service (Shop) Manual - 6LD435 .................................... .................. N/A FM5/FM5X Honda 5.5hp .......... Parts Manual - GX160K1TX .................................... 195-028 ...... 053-042 Honda 5.5hp .......... Parts Manual - GX160K1QX ................................... 194-598 ...... 053-042 Honda 5hp .............. Parts Manual – GX160UT2QX2 ............................... 195-1640 ....... 053-2456 Honda 5.5hp .......... Operators Manual - GX160K1TX & GX160K1TX ............ .................. N/A Honda 5hp .............. Operators Manual – GX160UT2QX2........................ 195-1640 ....... 053-2455 Honda 5.5hp .......... Service (Shop) Manual - GX160K1TX & GX160K1TX .... .................. N/A Honda 5hp .............. Service (Shop) Manual – GX160UT2QX2 ................ 195-1640 ...... 053-2495 FM13V/FM13X Honda 13hp ............ Parts Manual - GX390K1QXC ................................. 195-278 ...... 053-047 Honda 12hp ………..Parts Manual – GX390UT2QNR2.......................... 195-2449 ....... 053-XXX Honda 13hp ........... Operators Manual - GX390K1QXC ................................. .................. N/A Honda 12hp ............ Operators Manual – GX390UT2QNR2 .................. 195-2449 ........... .N/A Honda 13hp ........... Service (Shop) Manual - GX390K1QXC ......................... .............. 055-047 Honda 12hp ............ Service (Shop) Manual – GX390UT2QNR2 .......... 195-2449 ....... 053-XXX FM50 Kubota .................... Parts Manual – V3300EBG ...................................... 499-348 .......... N/A Kubota ................... Operators Manual – V3300EBG ...................................... .............. 054-076 Kubota ................... Service (Shop) Manual – V3300EBG .............................. .................. N/A

125

Continued

Filters Engine: MM5 Air Filter Parts Ass’y - Honda 5.5hp (GX160K1TX) .......................................................... 194-001 Element Set (primary, paper) - Honda (GX160K1TX) ......................................... N/A (secondary, foam) - Honda (GX160K1TX) .................................... N/A Fuel Filter (04H-04H, in-line) - Honda 5.5hp (GX160K1TX) ............................................ 194-002 Air Filter Parts Ass’y - Lombardini 5.5hp (15LD315K) .......................................................... N/A Element Set (primary, paper) - Lombardini (15LD315K) ..................................... N/A (secondary, foam) - Lombardini (15LD315K) ................................ N/A Oil Filter Element (spin-on) - Lombardini 5.5hp (15LD315K) ............................................... N/A Fuel Filter (0_H-0_H, in-line) - Lombardini 5.5hp (15LD315K) ............................................ N/A MM9 Air Filter Parts Ass’y - Honda 9hp (GX270PA2) ............................................................... 194-104 Element Set (primary, paper) - Honda (GX270PA2) ........................................... N/A (secondary, foam) - Honda (GX270PA2) ...................................... N/A Fuel Filter (0_H-0_H, in-line) - Honda 9hp (GX270PA2) .................................................. 194-107 Air Filter Parts Ass’y - Lombardini 10hp (6LD435) ........................................................... 194-109 Element Set (primary, paper) - Lombardini (6LD435) .......................................... N/A (secondary, foam) - Lombardini (6LD435) .................................... N/A OIL Filter Element (spin-on) - Lombardini 10hp (6LD435) ............................................... 194-108 Fuel Filter (0_H-0_H, in-line) - Lombardini 10hp (6LD435) .............................................. 194-110 FM5/FM5X Air Filter Parts Ass’y - Honda 5.5hp (GX160K1QX & GX160K1TX) ................................ 194-001 Element Set (primary, paper) - Honda (GX160K1QX & GX160K1TX) ................ N/A (secondary, foam) - Honda GX160K1QX & (GX160K1TX) .......... N/A Fuel Filter (04H-04H, in-line) - Honda 5.5hp (GX160K1QX & GX160K1TX) ................... 194-002 FM13/FM13V/FM13X Air Filter Parts Ass’y - Honda (GX390K1QXC) ................................................................ 195-159 Element Set (primary, paper) - Honda (GX390K1QXC) ...................................... N/A (secondary, foam) - Honda (GX390K1QXC) ................................ N/A FM50 Air Filter Parts Ass’y – Kubota – (V3300EBG) ................................................................. 499-360 Element Set (primary) – Kubota – (V3300EBG) .............................................. 499-361 (secondary) - Kubota – (V3300EBG) ........................................ 499-362 Oil Filter Element - Kubota – (V3300EBG) ....................................................................... 194-268 Fuel Filter - Kubota – (V3300EBG) .................................................................................. 153-829

Water {H2O}: Water Strainer (2.250” x 7.0”) - Y-Strainer, MM5, MM5D, MM5H .................................... 159-239 Strainer (4.000” x 9.0”) - Y-Strainer, MM9, MM9D, MM9H, FM13 ........................ 159-490

126

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ............................................. 190-051 O-ring Repair Kit - Field Service (46 different O-rings) .................................................... 190-052

127

ID0040564

128

ID0135281