Ditch Witch DT100M Parts Manual 053-2910 - PDF DOWNLOAD

DT100M Parts Manual

Issue 5

053-2910

1

DT100M ISSUE NO. 05PL-05/22 For Replacement Copy Order P/N 053-2910

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works

This manual contains information concerning the following models: DT100M

Copyright 2016, 2017, 2018, 2019, 2022 by The Charles Machine Works, Inc. , Ditch Witch, AutoCrowd, Roto Witch, and CMW are registered trademarks of The Charles Machine Works, Inc. ID0433106

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY ______________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy July 2019

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse (including, but not limited to, rollover), abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 07

ID0134872

5

CONTENTS ___________________ Decals

Accessories

Decal Location ............................................. 8

Alligator Bit Puller ..................................... 82 Alligator Bit Punch..................................... 84 Auger Mount and Restraint ...................... 44 Augers ....................................................... 46 Boom Tube ................................................ 56 Boom, HD LTR Wear Bar ........................... 62 Boom, Roller – Non-Wear Bar ...................... 60 Boom, Roller – Wear Bar ............................. 58 Chain Jaws ................................................. 86 Chain, 110K Alligator ................................. 78 Chain, 110K Combo ................................... 72 Chain, 110K Duratooth.............68, 70, 74, 76 Chain, 70K Alligator ................................... 66 Chain, 70K Duratooth................................ 64 Grease Cylinder Bracket ............................ 54 Headshaft Gearbox ................................... 52 Roller ......................................................... 48 Roller, HD .................................................. 50 Special Tools.............................................. 80

Frame Components Attachment Frame .................................... 12 Controller and Harness ............................. 32 Counterweight Assembly .......................... 30 Gearbox Mount ......................................... 18 Headshaft .................................................. 16 Mechanical Gearbox ................................. 26 Pivot .......................................................... 14 Ship Kit ...................................................... 20 Spoils Door ................................................ 22 Spoils Door – Offset .................................... 24

Hydraulics Lift ............................................................. 36 Schematic .................................................. 40 Trench Cleaner .......................................... 38

Electrical RT Electrical Schematic Reference ............ 90

Miscellaneous Bolt/Nut Torque Chart ............................. 92 Optional Kits ............................................. 98 Related Publications ................................. 98 Replacement O-Ring Chart ....................... 97 Warranty Registration ............................ 100

ID0433107

6

7

DECALS

8

DECAL LOCATION DT100M

8 1

3 7

2

2

10

9

4

5

3

10 6

04

ID0378700

9

DECAL LOCATION DT100M REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10

270-6796 270-6784 700-002 270-6526 275-231 270-7947 701-097 701-184 270-6601 275-023 274-318

QTY

1 3 2 2 1 1 1 1 1 2

DESCRIPTION

REMARKS

DT100M SERVICE DECAL KIT TRENCH CLEANER DANGER CHAIN AND AUGER ISO DT100M MODEL ID DANGER STRIPE (2.75” X 18”) CHAIN TENSION ISO DANGER CHAIN AND AUGER ISO WARNING MOVING PARTS ISO TRENCHER RAISE/LOWER OIL LEVEL TIE DOWN

FOOTNOTES

04

ID0378700

10

NOTES:

ID0134963

11

FRAME COMPONENTS

12

ATTACHMENT FRAME DT100M

4 2 3

1

01

5

ID0366019

13

ATTACHMENT FRAME DT100M

REF PART NO. NUMBER

QTY

1 301-9335 2 319-774 3 322-923 4 106-383 5 106-558

1 ATTACHMENT FRAME 1 CYLINDER COVER 1 REAR CYLINDER COVER 8 FLG LK SCREW (M10-1.50 X 30MM) 4 CLIP NUT (M10-1.50)

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0366019

14

PIVOT DT100M

6

4

15 17

16

1 13 3

7 13

10

8

12

2

9 10 6 11

02

14 5

10

ID0365800

15

PIVOT DT100M

REF PART NO. NUMBER

QTY

1 141-690 2 141-696 3 141-695 4 319-909 5 107-127 6 106-665 7 320-965 8 125-552 9 106-616 10 106-399 11 106-442 12 106-075 13 115-004 14 115-012 15 194-506 16 110-306 17 105-508

1 DOUBLE PIVOT 1 PIVOT SLEEVE 1 PIVOT CAP AR SHIM 6 SCREW (M20-2.50 X 80MM, 10.9) 12 LOCKNUT (M20-2.50, 10.9) 1 ADJUSTMENT PLATE 1 BEARING (2.937") 4 SCREW (M16-2.00 X 55MM, 10.9) 18 WASHER (M20, HARDENED) 4 FLG LKNUT (M16-2.0,PRVTRQ10.9) 6 SCREW (M20-2.50 X 60MM, 10.9) 3 ZERK (04N45) 1 ZERK (04N) 2 CONTROL CABLE 2 CLEVIS PIN (3/8" X .890") 2 COTTER PIN (3/32" X 1")

DESCRIPTION

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

260-1005 260-1006 260-1007

LIFT DEVICE BEARING DRIVER SEAL DRIVER

FOOTNOTES:

1. SEE PAGE ENTITLED "SPECIAL TOOLS" ID0113949.

NOTE:

02

ID0365800

16

HEADSHAFT DT100M

17 11

12 5

14

15

4

3

5

7

2

6

12 10

6

5

9

1

4 5 9

17

16

6

3

11

10

2

7

8

13

3 9

7 13

13

9

3

6

1 14

13

5

02

7

10

16

10

5 ID0366224

17

HEADSHAFT DT100M

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

1 HEADSHAFT 1 SPROCKET HUB 2 HEADSHAFT SPROCKET (12T) 4 BACKUP RING 32 WASHER (M16, HARDENED) 16 SCREW (M16-2.00 X 75MM, 10.9) 16 LOCKNUT (M16-2.0,PRV TRQ,10.9) 1 SPROCKET HUB 2 DIRT SHIELD 2 SPACER 4 SEAL (5.570) 2 DOWEL PIN (1/8" X 3/4") 1 WASHER 1 SCREW (M24-3.00 X 50MM, 10.9) 1 SNAP RING (6.562") 1 BEARING SPACER 2 BEARING (3.937")

166-480 179-579 141-740 319-775 106-398 107-457 106-545 179-580 319-776 179-575 157-838 105-554 179-578 106-600 117-933 179-574 125-551

DESCRIPTION

REMARKS

USE 277 LOCTITE, TORQUE TO 775 FT-LB

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0366224

18

GEARBOX MOUNT CT100M/DT100M

7 6 3 9 8 4 5

1

5 2 8

9

6 10

01

ID0364712

19

GEARBOX MOUNT CT100M/DT100M REF PART NO. NUMBER

QTY

1 166-198 2 306-879 3 329-435 4 105-423 5 116-348 6 105-071 7 105-830 8 107-336 9 106-355 10 105-829

1 GEARBOX 6.96:1 (HI) 1 BRACKET, LOWER GEARBOX 1 BRACKET, GEARBOX 1 WASHER (3/4") 3 BUMPER 3 WASHER (1/2") 1 FLG LK BOLT (1/2-NC X 1-1/4") 6 FLG SCREW (M16-2.00X45MM,10.9) 6 FLG NUT (M16-2.00, 10.9) 2 FLG LK BOLT (1/2-NC X 1")

DESCRIPTION

REMARKS

SEE NOT SHOWN SECTION

NOT SHOWN:

166-197 166-194 166-518

GEARBOX 4.64:1 (STD):1 GEARBOX 8.4:1 (LO):1 GEARBOX 9.26:1 (ELO):1

FOOTNOTES:

NOTE:

01

ID0364712

20

SHIP KIT DT100M

17 18

3 27

6 5 7

2

1

19

5 4

8

9

11

22

10

28

21

7 16

20 25

12 15 13

14

24

23 26

01

ID0388580

21

SHIP KIT DT100M

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

QTY

DESCRIPTION

REMARKS

323-066 1 CLAMP 105-340 6 FLG LOCKNUT (3/4-NC) 107-314 6 BOLT (3/4-NC X 7-1/2", GD8) 320-706 1 RIGHT SPOILS DOOR MOUNT 107-002 8 FLG LK SCREW (M10-1.50 X 30MM) 319-942 1 RIGHT SHIELD 106-709 7 FLG LK NUT (M12-1.75) 106-477 5 SCREW (M12-1.75 X 45MM, 10.9) 106-474 16 SCREW (M20-2.50 X 60MM) 106-374 16 HEX NUT (M20-2.50, 10.9) ZP 106-399 32 WASHER (M20, HARDENED) 106-666 2 SCREW (M16-2.00 X 65MM, 10.9) 184-840 2 SPACER 106-355 2 FLG NUT (M16-2.00, 10.9) 106-392 2 WASHER (M16) 160-1326 1 DRIVE SHAFT ASSEMBLY 105-293 5 BOLT (1/2-NC X 3/4") 314-532 1 WEAR STRIP 305-918 1 VALVE COVER PLATE 107-003 2 FLG LK SCREW (M12-1.75 X 35MM) 107-008 6 FLG LK SCREW (M12-1.75 X 50MM) 106-354 6 FLANGE NUT (M12-1.75) 315-786 1 MOUNT 106-991 3 FLG LK SCREW (M8-1.25 X 20MM) 106-386 3 FLG LOCKNUT (M8-1.25) 305-757 1 DIFFERENTIAL SHIELD 106-383 7 FLG LK SCREW (M10-1.50 X 30MM) 302-1800 1 DRIVELINE COVER

NOT SHOWN:

FOOTNOTES:

NOTE:

1. DRIVE LINE SERVICE PARTS 180-724 (CROSS/BEARING KIT), 160-1327 (DRIVE SHAFT), 178-297 (YOKE), 178-298 (YOKE& FLANGE)

01

ID0388580

22

SPOILS DOOR DT100M

1

3

2

7

8 9 4

12

6 5 11

10

13

01

ID0388576

23

SPOILS DOOR DT100M

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13

1 SPOILS DOOR 2 SCREW (M10-1.50 X 35MM) 2 LOCKNUT (M10-1.50) 1 CONTROL CABLE 1 CLEVIS PIN (3/8" X .890") 2 COTTER PIN (3/32" X 1") 1 CLEVIS PIN (3/8" X .500) 2 JAM NUT (1/2-NC) 1 KEEPER 2 CARRIAGE BOLT (1/2-NCX1.00") 2 CARRIAGE BOLT(M12-1.75 X 30MM) 1 MOUNT PLATE 2 JAM NUT (M12-1.75)

319-952 105-876 106-175 194-506 110-306 105-508 108-082 105-044 319-908 106-413 107-683 316-599 107-669

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0388576

24

SPOILS DOOR OFFSET DT100M

1 2

4

3

3 5

3 21

20

13

12 14

16

15

8 9

7

6

19

10 11 18

17

02

ID0388557

25

SPOILS DOOR OFFSET DT100M

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

1 12" OFFSET COVER PLATE 1 8" OFFSET COVER PLATE 8 FLG LK SCREW (M10-1.50 X 30MM) 1 8" OFFSET SPOILS DOOR 1 12" OFFSET SPOILS DOOR 1 RIGHT SPOILS DOOR MOUNT 1 LEFT SPOILS DOOR MOUNT 1 KEEPER 2 CARRIAGE BOLT (1/2-NCX1.00") 1 MOUNT PLATE 2 JAM NUT (M12-1.75) 2 JAM NUT (1/2-NC) 1 CLEVIS PIN (3/8" X .500) 1 CONTROL CABLE 2 COTTER PIN (3/32" X 1") 1 CLEVIS PIN (3/8" X .890") 1 RIGHT SHIELD 2 CARRIAGE BOLT(M12-1.75 X 30MM) 10 FLG LK NUT (M12-1.75) 10 SCREW (M12-1.75 X 45MM) 1 FLG LOCKNUT (M10-1.50)

322-384 322-383 107-002 320-719 320-720 320-706 320-705 319-908 106-413 316-599 107-669 105-044 108-082 194-506 105-508 110-306 319-942 107-683 106-709 107-307 106-387

DESCRIPTION

REMARKS

USE AS NEEDED FOR DIFFERENT INSTALLATION POSITIONS USE AS NEEDED FOR DIFFERENT INSTALLATION POSITIONS

NOT SHOWN:

FOOTNOTES:

NOTE:

1. OFFSET COVER KIT 191-334 CONTAINS ITEMS 2 & 4, OFFSET COVER KIT 191-335 CONTAINS ITEMS 1 & 5.

02

ID0388557

26

MECHANICAL GEARBOX M910, M912, DT100M, CT100M

27

37

36 34 33 39

PINION ASSEMBLY

20

38

19 32

31

29 28

30

19

20 25 26

20

25

19

9

24 23 22

3

19

1

35

21 8

2

20

4

18 17

2 6

16 15

5

7

10

8

3

14 13

9 11 13

10

12

ID0087759

27

MECHANICAL GEARBOX M910, M912, DT100M, CT100M REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

QTY

166-194 166-197 166-198 166-518 191-217 191-218 191-219 191-355 334-084 1 126-012 2 126-013 2 167-353 1 168-060 1 165-596 1 165-598 1 166-514 1 106-866 2 334-083 1 115-211 2 157-553 2 105-1278 1 165-719 1 165-720 1 165-721 1 165-722 1 165-121 1 105-245 12 156-241 1 159-003 1 125-193 1 105-683 1 105-682 1 105-685 1 106-628 16 125-296 4 125-295 4 168-061 1 165-597 1 165-599 1 166-513 1 167-354 1 105-225 12 180-832 1 165-084 1 125-283 1

DESCRIPTION

REMARKS

GEARBOX 8.4:1 (LO) GEARBOX 7.64:1 (STD) GEARBOX 6.96:1 (HI) GEARBOX 9.26:1 (ELO) LOW GEAR RATIO CONV KIT STANDARD GEAR RATIO CONV KIT HIGH GEAR RATIO CONV KIT ELO GEAR RATIO CONV KIT MACHINED HOUSING TAPERED RACE (4.527") TAPERED BEARING (2.952") OUTPUT SHAFT LOW RANGE GEAR MID RANGE GEAR HIGH RANGE GEAR EXTRA LOW RANGE GEAR DOWEL PIN (M10 X 30MM) COVER (MACHINED) PLUG (08N, SQ, MAG) INTERNAL SEAL (2.875") SIGHT GAUGE (16N) SHIM (.002") SHIM (.003") SHIM (.005") SHIM (.015") FLANGE SCREW (M10-1.50 X 25MM) STREET ELBOW (02N-02NF90) AIR VENT (02N) BEARING RETAINER SHIM (.002" RED) SHIM (.003" GREEN) SHIM (.010" BROWN) SCREW (M10-1.5 X 60MM) BEARING RACE (3.500") TAPERED BEARING (1.625") PINION GEAR PINION GEAR HIGH RANGE PINION EXTRA LOW RANGE PINION INTERMEDIATE SHAFT BOLT (7/16-NC X 1", SOC) HUB RING GEAR AND PINION BEARING (STRAIGHT ROLLER)

INCLUDES REF NO.'S 1 THRU 39 INCLUDES REF NO.'S 1 THRU 39 INCLUDES REF NO.'S 1 THRU 39 INCLUDES REF NO.'S 1 THRU 39

59T 57T 55T 61T

32T 34T 36T 30T

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1.

THE RING AND PINION GEARS ARE A MATCHED SET

NOTE:

10

ID0087759

28

MECHANICAL GEARBOX M910, M912, DT100M, CT100M REF PART NO. NUMBER

27.

28.

QTY

DESCRIPTION

105-317 165-671 165-697 165-672 165-280 105-168 181-534 165-673 165-674 165-675 165-676 165-677 181-535 155-890 185-192 149-246 106-144 105-502 153-856

1 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1

CASTLE NUT (1-NF) SHIM (.002") SHIM (.010") SHIM (.005") PINION BEARING HOUSING BOLT (3/8-NC X 2", SOC) PINION BEARING CONE SPACER SHIM (.005") SHIM (.006") SHIM (.007") SHIM (.008") SHIM (.010") SPACER INTERNAL SEAL SPACER FLANGE WASHER (1") COTTER PIN (3/16" X 2") O-RING (223 D90)

NOT SHOWN: 256-603

1

BLACK SILCONE (10.67 OZ TUBE)

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

REMARKS

SEE FOOTNOTE 2

INCLUDED IN KITS 191-217,191-218,191-219

NOT SHOWN:

FOOTNOTES:

2.

ITEM 39 IS USED IN GEARBOXES WITH DATE CODE 100302 AND AFTER. THIS NUMBER DO NOT HAVE THE O-RING SEAT IN THIS PART

GEARBOXES BEFORE

NOTE:

10

ID0087759

29

30

COUNTERWEIGHT ASSEMBLY DT100M

2

4

3

1 7 6

01

5

ID0394925

31

COUNTERWEIGHT ASSEMBLY DT100M

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7

1 LEFT WEIGHT BRACKET 2 WEIGHT (CASTING) 4 WASHER (M20) 4 SCREW (M20-2.50 X 70MM) 1 ALL THREAD (7/8 NC X 21") 3 JAM NUT (7/8-NC) 3 WASHER (1.070")

322-771 375-369 106-393 106-346 108-071 107-655 106-696

DESCRIPTION

REMARKS

SOME CONFIGURATIONS MAY REQUIRE MORE WEIGHTS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0394925

32

CONTROLLER AND HARNESS DT100M

6 7 5

8

4 3 2 1

14 9

13 12 15

10

11

02

ID0461844

33

CONTROLLER AND HARNESS DT100M

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

2 SCREW (M4-0.70 X 20MM) 2 WASHER (M4) 1 CAN STICK DOUT x 2 W/ CAN BRIDGE 2 CLIP NUT (M4-.7) 2 FLG LOCKNUT (M8-1.25) 2 FLG SCREW (#10-16 X 1/2") 1 SHEET CONTROLLER MOUNT 2 FLG LK SCREW (M8-1.25 X 20mm) SERRATED 1 SHEET, CONTROLLER COVER 1 3 CAN STICK HARNESS 4 CAP 1 SWITCH RETAINER 1 SWITCH GUARD 1 SWITCH, PROPORTIONAL (SPRING RETURN) 4 4-20 TORX, PLASTITE

106-556 107-597 220-2450 107-516 106-386 105-804 302-1029 105-1795 302-1284 215-0094 215-1733 302-0328 362-2112 215-2735 105-1886

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0461844

34

NOTES:

ID0134963

35

HYDRAULICS

36

LIFT HYDRAULICS DT100M

26 27 28 20

25 24

7 6 2

5

17

8 15

1

12

14

21 16

4 3 4

34

11

9 13

10

23

22

18 31

20

32 33

10 29 30

03

30

31

ID0366050

37

LIFT HYDRAULICS DT100M

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19* 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

2 CONNECTOR (06O-08S) 2 UNION (06O-06OFX90) 1 HYD ELECT MANIFOLD 4 CAV 2 CART ATTACH 2 FLG BOLT (3/8-NC X 3/4", NLK) 1 FLG LK BOLT (5/16-NCX3/4",NLK) 1 CONNECTOR (04O-06S90, ORF) 1 CONNECTOR (04O-06S90) 1 HOSE (04OFX90S-26"-3000) 1 HOSE (04OFX90L-28"-3000) 3 CONNECTOR (04O-06S) 1 HYD LOCKOUT VALVE 2 SCREW (M6-1.00 X 45MM) 2 LOCKNUT (M6-1.00,PRV TRQ,NLK) 1 FLOW CHECK (06S-06O, 5 PSI, .055 ORF) 1 REDUCER (04O-06OF) 1 HOSE (04OFX90S-21"-5000) 1 HOSE (04OFX90S-21"-5000) 2 ABRASION SLEEVE (1.25" X 20") 2 UNION RUN TEE (04OFX-04O-04O) 4 CONNECTOR (04O-08S90) 1 HOSE (04OFX-15"-5000) 1 HOSE (04OFX-15"-5000) 2 CYL (3.5" X 1.75" X 14") 2 COMPOSITION BUSHING (2") 2 TAPERED PIN (2.000" X 6.750") 2 TAPERED INSERT (2") 1 WASHER (M20, HARDENED) 2 SCREW (M20-2.50 X 60MM) 4 KLIP RING (2.000") 4 MACHINERY BUSHING (2.000") 4 SPRING BUSHING 2 COMPOSITION BUSHING 2 CYLINDER PIN (2.00" X 4.52") 2 PLUG (06S)

154-222 154-228 150-4517 107-245 107-248 154-387 154-226 154-802 515-210 154-220 149-136 106-093 106-237 150-3883 154-373 515-305 515-305 117-622 154-265 154-276 154-860 154-860 149-243 125-754 179-761 184-064 106-399 106-474 115-781 110-168 125-791 125-796 179-597 154-384

DESCRIPTION

REMARKS

CONNECTS TO "V2" PORT CONNECTS TO "V1" PORT

CONNECTS TO "C1" PORT CONNECTS TO "C2" PORT

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0366050

38

TRENCH CLEANER HYDRAULICS DT100M

14

13 9

15 16

10

6

26 27

22 23 28

17

5

21 25

5

11 12 4

22

30

2 4

23

28

3

1

6

8 18

7 29

29 32

24 34

8 20 19 33

32

36

38 31 33

37

36 42

44 35

37

41 40

40

44 25 23 39

41 44

43

02

ID0445061

39

TRENCH CLEANER HYDRAULICS DT100M

REF PART NO. NUMBER

1 149-136 2 106-093 3 106-237 4 154-220 5 150-1066 6 150-1066 7 150-5322 8 150-5322 9 220-2450 10 107-516 11 107-597 12 106-556 13 110-854 14 217-817 15 500-1311 16 500-2554 17 500-2653 18 117-393 19 154-275 20 154-296 21 105-106 22 305-256 23 110-270 24 105-832 25 105-198 26 154-252 27 151-032 28 157-263 29 150-5312 30 105-1123 31 140-0014 32 150-5314 33 150-5313 34 117-281 35 140-0015 36 150-1966 37 150-5314 38 116-642 39 140-0016 40 150-5316 41 150-5315 42 105-1157 43 140-0018 44 115-1025

QTY

DESCRIPTION

1 HYD LOCKOUT VALVE 2 SCREW (M6-1.00 X 45MM) 2 LOCKNUT (M6-1.00,PRV TRQ,NLK) 6 CONNECTOR (04O-06S) 1 HOSE (04OFX90L-30"-3000) 1 HOSE (04OFX90L-30"-3000) 1 HOSE (04OFX45-44"-5000) 1 HOSE (04OFX45-44"-5000) 1 CAN STICK DOUT x 2 W/ CAN BRIDGE 2 CLIP NUT (M4-.7) 2 WASHER (M4) 2 SCREW (M4-0.70 X 20MM) 1 SWITCH ACTUATOR GUARD 1 ROCKER SWITCH (SEALED) 2 SOLENOID COIL, 12VDC w/ ZENER DIODE 1 HYD ELECT CART VALVE (HF SV08-47D 3P4W) 2 HYD CAVITY PLUG CART (HF CP10-20-N 2W) 1 ABRASION SLEEVE (1.25" X 74") 2 BK CONNECTOR (04O-04OBK) 2 CAP (04OF) 1 BOLT (1/4-NC X 2") 2 BACKUP SPACER 6 BOLT-ON CLAMP (9/16", HALF) 1 FLG LOCKNUT (1/4-NC) 2 BOLT (1/4-NC X 1-3/4") 2 CONNECTOR (04S-04O90) 1 CYL (2.0 X 1.25 X 12.0) 1 HOSE (04OFX-102"-5000) 1 HOSE (04OFX-92"-5000) 1 ABRASION SLEEVE (1.25" X 106") 1 CLEANER BAR 4' 1 HOSE (04OFX-118"-5000) 1 HOSE (04OFX-104"-5000) 1 ABRASION SLEEVE (1.25" X 122") 1 CLEANER BAR 5' 1 HOSE (04OFX-133"-5000) 1 HOSE (04OFX-118"-5000) 1 ABRASION SLEEVE (1.25" X 140") 1 CLEANER BAR 6' 1 HOSE (04OFX-153"-5000) 1 HOSE (04OFX-144"-5000) 1 ABRASION SLEEVE (1.25 X 153") 1 CLEANER BAR 8' 3 1/4" TRIM LOCK

REMARKS

TO PORT "PSB" TO PORT "PSA"

INSTALL PLUGS INTO PORTS BELOW "PSA" AND "PSB"

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 4 SEE FOOTNOTE 4 SEE FOOTNOTE 4 USED ON 5', 6' AND 8' BOOM LENGTHS

NOT SHOWN:

FOOTNOTES:

1. PART OF 4' DT BOOM KIT # 140-0034 2. PART OF 5' DT BOOM KIT #140-0035 3. PART OF 6' DT BOOM KIT #140-0036 4. PART OF 8" DT BOOM KIT #140-0038. INCLUDED IN KIT ONE EACH OF (#23) 110-270 BOLT ON CLAMP AND (#25) 105-198 BOLT.

NOTE:

REFERENCE #1 THRU #26 ARE PART OF DT100M TRENCH CLEANER KIT #190-2420 REFER TO O-RING NOTE (800-301) IN BACK OF BOOK FOR REPLACEMENT OF O-RINGS.

02

ID0445061

40

HYDRAULIC SCHEMATIC

CT100M, CT120H, ST120H, and DT100M 1 or 2

Tr encher Motor

A

F wd

R ev

Attachment Fw d.

Attachme nt Rev. Boom Lift

B

L2

12

To Filter

Trench Cleaner (Optional for a ll Models) 7

Boom Traverse (ST120H only)

11

14

Raise Rear Attachment Valve

Raise

Low er

Low er Left Right

8

13

9

10

To Tank

3

PSA

PSB

BSB

PLB

BSA

PLA

BLA

BLB

Trencher Valve

4 &5

0.050" P

0.050"

0.068"

0.068"

T

03

Ref. Qty Description Notes: 1 1 Trencher Motor 75cc 2 1 Trencher Motor 55cc 3 1 Attachment Valve 4 1 Trench Cleaner Cartridge Valve 5 2 Trench Cleaner Valve solenoid 6 2 2-Way Cavity Plug 7 1 Trench cleaner Cyl 8 1 Double PO checks 9 1 Double PO checks 10 1 Double PO checks 11 1 Boom Traverse Cyl 12 2 Boom Lift Cyl 13 1 Orifice Check valve 14 1 Boom Traverse Cylinder

ID0407936

41

42

NOTES:

ID0134963

43

ACCESSORIES

44

AUGER MOUNT AND RESTRAINT

9 10 2

11

13

8 7

1

16 14 15

17 19 18

20

4 3

01

12

21

6 5

ID0395489

45

AUGER MOUNT AND RESTRAINT REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

141-521 141-520 141-539 141-540 143-009 143-010 140-0001 140-0002 140-0003 140-0004 140-0005 140-0006 140-0007 140-1128 140-1129 140-1130 140-1131 140-1176 140-1177 140-1178 140-1179

DESCRIPTION

LEFT AUGER BRACKET RIGHT AUGER BRACKET 24" LEFT AUGER BRACKET 24" RIGHT AUGER BRACKET LEFT AUGER BRACKET ASS'Y(12") RIGHT AUGER BRACKET ASS'Y(12") GG DANGER RESTRAINT BAR (62P) GG DANGER RESTRAINT BAR (70P) GG DANGER RESTRAINT BAR (78P) GG DANGER RESTRAINT BAR (94P) GG DANGER RESTRAINT BAR (62P)-PT GG DANGER RESTRAINT BAR (70P)-PT GG DANGER RESTRAINT BAR (78P)-PT BOOM TUBE (62P - 51") BOOM TUBE (70P - 63.3") BOOM TUBE (78P - 75.5") BOOM TUBE (94P - 101.1") HD BOOM TUBE (62P - 51") HD BOOM TUBE (70P - 63.3") HD BOOM TUBE (78P - 75.5") HD BOOM TUBE (94P - 101.1")

REMARKS

USED ON COMBO ATTACHMENTS USED ON COMBO ATTACHMENTS

USED ON COMBO ATTACHMENTS USED ON COMBO ATTACHMENTS USED ON COMBO ATTACHMENTS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0395489

46

AUGERS 2

1

6

7 4

5 3

8

2

9 10

6

1

11 7 5

16

4 2

1

12

17

20 6

3 8

13

15 14 18

19

02

13

ID0410158

47

AUGERS REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

10 BOLT (3/4-NC X 5") 11 FLG LOCKNUT (3/4-NC) 4 BOLT (1/2-NC X 2-1/2") 4 GUARD BUSHING (.562") 2 ZERK GUARD 8 FLG LOCKNUT (1/2-NC) 2 FLANGE BEARING (1.750", 4-BLT) 4 FLG LK BOLT (1/2-NC X 1-1/2") 1 DOUBLE AUGER SHAFT 1 SINGLE AUGER SHAFT 1 RIGHT AUGER 1 RIGHT AUGER 3 LOCKNUT (3/4-NC) 2 ZERK (02N) 9 MACHINERY BUSHING (2.25") 4 BOLT(3/4-NC X 1 3/4") 1 ROCK GUARD 1 AUGER DRIVE SPROCKET ASS'Y 1 LEFT AUGER 1 LEFT AUGER

105-473 105-340 105-082 184-076 143-021 105-833 125-620 105-831 145-244 145-245 145-109 145-070 105-953 115-001 110-211 105-499 143-022 140-665 145-071 145-110

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0410158

48

ROLLER (19" OD)

1

2 13 8

3 5 9

10

7

11

4 5

6 4

11 9 12

6 8 13

06

ID0129294

49

ROLLER (19" OD) REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

190-183 105-377 115-001 115-003 115-152 115-470 125-216 125-265 142-757 145-589 155-852 181-697 181-699 166-437 184-067

QTY

1 1 1 1 2 2 2 1 2 2 1 2 1 2

DESCRIPTION

REMARKS

BEARING/SEAL REPAIR KIT JAM NUT (1-1/2-NF) ZERK (02N) ZERK (1/4-NF, STR) PLUG (12N, SQ FM) INTERNAL SNAP RING (3.250") TAPERED RACE (3.265") TAPERED BEARING (1.5") LT ROLLER (3.067"P, 19") SPACER EXTERNAL SEAL (2.250") BEARING SPACER SEAL SLEEVE TAIL SHAFT SEAL SPACER

INCL REF NO.'S 4-6, 8-11 & 13 NON-SELF TAPPING SELF TAPPING

INCL REF NO.'S 2 & 3 ENDS WITH S/N

NOT SHOWN:

FOOTNOTES:

NOTE:

06

ID0129294

50

HD ROLLER 19"

2 3

8

10

9 6 5 7

4 4

9

6 FACTORY MATCHED BEARING ASSEMBLY (SEE FOOTNOTE 1)

BEARING

SPACER 8

7 11

10

1 11

1

7 10

RACE

07

6 9

SNAP RINGS

ID0113864

51

HD ROLLER 19" REF PART NO. NUMBER

QTY

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

1 1 1 1 1 2 2 1 2 2 1

141-626 115-003 115-152 125-546 129-013 157-308 141-629 141-625 141-627 157-309 107-920

DESCRIPTION

TAIL SHAFT NUT ZERK (1/4-NF, STR) PLUG (12N, SQ FM) BEARING ASSEMBLY LT ROLLER (3.067"P, 19.0") EXTERNAL SEAL (3.875") SEAL SLEEVE BOOM TAIL SHAFT SEAL SPACER V-RING SEAL BOLT (5/16-NC X 3/8 ", SOC)

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 4

NOT SHOWN:

FOOTNOTES:

1. REF. NO. 4 (BEARING ASSEMBLY) IS FACTORY MATCHED, DO NOT MIX CUPS, SONES, SPACERS, ETC. ASS'Y INCLUDES: 2X INT. SNAP RING, 2X TAP RACE, 2X TAP BEARING & BEARING SPACER 2. CHECK SURFACE OF SEAL BEFORE INSERTING SO PROPER SIDE FACES OUTSIDE 3. WIDER SIDE OF SEAL MUST BE INSTALLED FACING INSIDE 4. AFTER SETTING THE PRE-LOAD OF THE BEARING, REF. #11 (107-920) SHOULD FIT IN ONE OF THREE HOLES IN THE BOOM SIDE PLATE TO KEEP THE TAILSHAFT NUT FROM LOOSENING. NOTE:

07

ID0113864

52

HEADSHAFT GEARBOX - STANDARD DUTY H500, H600, H700, H800, H900

26

25

1 8 14

7 18 7

9 27 15 13 24

22

5 3

12 4

10 11 16 17 19 9 11 10

6 23 12

5 14 21 20

10

2

ID0093139

53

HEADSHAFT GEARBOX - STANDARD DUTY H500, H600, H700, H800, H900 REF PART NO. NUMBER

DESCRIPTION

REMARKS

INCLUDES REF NO.'S 1 THRU 24 INCLUDES REF NO.'S 1 THRU 24 INCLUDES REF NO.'S 1 THRU 24 H615/H610 H615/H610 INCLUDES REF NO.'S 14,18,19,21 & 24 INCLUDES REF NO.'S 14,18,19,21 & 24 INCLUDES REF NO.'S 14,18,19,21 & 24

1 6 12 2 2 AR AR AR 2 1 2 2 2 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 AR AR AR AR 1 1 1 1 4 1

GEARBOX - 14.24:1 (LO) GEARBOX - 11.65:1 (STD) GEARBOX - 8.66:1 (HI) GEARBOX - 14.24:1 (STD) GEARBOX - 11.65:1 (STD) LOW GEAR RATIO KIT STD GEAR RATIO KIT HI GEAR RATIO KIT DOWELL PIN (3/8" X 7/8") FLG LK BOLT (3/8-NC X 1") FLG LK BOLT (3/8-NC X 1-1/2") SQUEEZE BAND CLAMP (7/16") PLUG (08N, SQ, MAG) BULK HOSE (1/4", SOLD PER 1') BULK TUBING (1/4", SOLD PER 1') BULK TUBING (1/4"SOLD PER 1') BALL BEARING (1.968") BALL BEARING (2.165") GEARBOX SPACER TAPERED RACE (4.527") TAPERED BEARING (2.952") SLIP-ON COUPLER (02N-04H90) PICKUP TUBE (02N-02NF90-2") INTERNAL SEAL (2.875") AIR VENT (02N) GEAR OUTPUT PINION INPUT PINION (18T, 14-SPL) INPUT PINION (21T, 14-SPL) INPUT PINION (26T, 14-SPL) INPUT PINION (18T) INPUT PINION (21T) INPUT GEAR (66T, 19-SPL) INPUT GEAR (63T, 19-SPL) INPUT GEAR (58T, 19-SPL) FLANGE SHIM (.002") SHIM (.003") SHIM (.005") SHIM (.015") GEARBOX HALF GEARBOX HALF (MACHINED) BOLT LOCK MOTOR ADAPTER BOLT (1/2-NC X 1-1/4",CSK SOC) BALL BEARING (1.968")

1

BLACK SILCONE (10.67 OZ TUBE)

INCLUDED IN KITS 190-441,190-442 & 190-443

QTY

166-055 166-056 166-057 -

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

190-441 190-442 190-443 105-534 105-826 105-874 110-491 115-211 116-356 116-166 117-902 125-040 125-043 179-733 126-012 126-013 155-158 514-123 157-553 159-003 165-113 165-114 165-115 165-116 165-117 165-170 165-173 165-118 165-119 165-120 165-121 165-719 165-720 165-721 165-722 169-020 169-021 300-194 331-195 195-611 125-095

USE 1 @ 11.50" USE 1 @ 11.50" USE 1 @ 11.50"

STAMPED WITH GEARBOX RATIO

NOT SHOWN:

256-603

10

ID0093139

54

GREASE CYLINDER BRACKET WEAR BAR BOOMS

I

1

I

6

@"" �

�

4

/� I� 3

3

c

801-028

55

GREASE CYLINDER BRACKET WEAR BAR BOOMS

REF NO,

PART NUMBER QTY DESCRIPTION

REMARKS

1 o.

105-340 105-473 -105-829 - - 105-884 143-001 -143-002 - - 150-749 150-748 -183-641 - - 183-542 184-089

5 FLG LOCKNUT ( 3/4-NC l USE LOCT[TE 609 5 BOLT (3/4-NC x 5 USE LOCT[TE 609 x 4- - FLG LOCK (1/2-NC 1 ") BOLT - - - - - - - 4 WASHER (.-531") 1 LEFT GREASE CYL PLATE 1- -R[GHT - - GREASE - - - CYL - - PLATE - - - - - - - - - - - - - GREASE CYL (2 • 5 x 2, 5 x 7" l (HD l SEE FOOTNOTE 1 SEE FOOTNOTE 1 GREASE CYL (2"X1.5 "X7" l (STD l 1- -ROD - P[N - - - - - - - - - - - - - - - - - - - 1 BARREL PIN 5 BOOM CROSSBOLE WASHER ( • 781

-

-

1.

2.

3.

4.

5.

6.

7.

8.

9.

-

-

II

)

II

II

II

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

� ­

_

_

_

_

_

_

_

(!') _

)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

FOOTNOTES - - - -

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

1. WEAR BAR BOOM PARTS ASSEMBLIES CONTA[N ALL PARTS ON THIS PAGE EXCEPT THE GREASE CYL[NDER, WH[CH Mt:JST BE ORDERED SEPARATELY. REFER TD PARTS PAGE T[TLED "GREASE CYL[NDER".

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

c

801-028

56

BOOM TUBE

5 2

1

4

3,6

04

ID0093140

57

BOOM TUBE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

QTY

100-736 100-737 105-065 AR 105-110 AR 140-1128 1 140-1129 1 140-1130 1 140-1131 1 143-023 1 143-024 1 143-025 1 143-026 1 143-035 1 143-036 AR 140-1176 1 140-1177 1 140-1178 1 140-1179 1

DESCRIPTION

SHORT TOP BAR KIT LONG TOP BAR KIT LOCKNUT (1/2-NC) BOLT (1/2-NC X 4-1/2") BOOM TUBE (51") BOOM TUBE (63.3") BOOM TUBE (75.5") BOOM TUBE (101.1") BOOM TUBE (52") BOOM TUBE (64.3") BOOM TUBE (76.5") BOOM TUBE (101.1") TOP WEAR BAR (SHORT) TOP WEAR BAR (LONG) HD BOOM TUBE (51") HD BOOM TUBE (63.3") HD BOOM TUBE (75.5") HD BOOM TUBE (101.1")

REMARKS

INCL REF NO.'S 1,2 & 4 INCL REF NO.'S 1,2 & 5 (4) PER 11.1" WEAR BAR,(6) PER 23.4" WEAR BAR (4) PER 11.1" WEAR BAR,(6) PER 23.4" WEAR BAR SEE FOOTNOTE 3, 62P/3P OR 96P/2P CHAINS SEE FOOTNOTE 3, 70P/3P OR 108P/2P CHAINS SEE FOOTNOTE 3, 78P/3P OR 120P/2P CHAINS SEE FOOTNOTE 3, 94P/3P OR 144P/2P CHAINS SEE FOOTNOTE 4, 62P/3P OR 96P/2P CHAINS SEE FOOTNOTE 4, 70P/3P OR 108P/2P CHAINS SEE FOOTNOTE 4, 78P/3P OR 120P/2P CHAINS SEE FOOTNOTE 4, 94P/3P OR 144P/2P CHAINS SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3, 62P/3P OR 96P/2P CHAINS SEE FOOTNOTE 3, 70P/3P OR 108P/2P CHAINS SEE FOOTNOTE 3, 78P/3P OR 120P/2P CHAINS SEE FOOTNOTE 3, 94P/3P OR 144P/2P CHAINS

NOT SHOWN:

FOOTNOTES:

1. FOR 70P/3P OR 108P/2P NON-WEAR BAR BOOM ARRANGEMENTS. 2. ONE (1) FOR 78P/3P OR 120P/2P NON-WEAR BAR BOOM ARRANGEMENTS, TWO (2) FOR 94P/3P OR 144/2P NON-WEAR BAR BOOM ARRANGEMENTS. 3. FOR PIVOTS WITH 5" ALIGNMENT PIN HOLE CENTERS, OR MODIFIED 8.5" PIN HOLE CENTER PIVOTS. 4. FOR PIVOTS WITH 8.5" ALIGNMENT PIN HOLE CENTERS.

NOTE:

04

ID0093140

58

ROLLER BOOM {WEAR BAR) 19" ROLLER

0 0

3

(}

�

0

0

B

801-033

59

ROLLER BOOM {WEAR BAR) 19" ROLLER

REF NO.

PART NUMBER QTY DESCRIPTION

REMARKS

3P LTR WEAR-BAR BOOM 62P INCL REF NO.'S 1-7, 62 PITCH CHAIN & 52 u BOOM TUBE 140-546 INCL REF NO.'S 1-7, 70 PITCH CHAIN & 64 u BOOM TUBE 140-547 3P LTR WEAR-BAR BOOM 70P u 140-548 INCL �E� N_O<S _ 1-_7,_ 7� P_lTfH _ CH_AI� � 7_7 _ BQ_OM_ T�B� - -78P -3P - LTR - -WEAR-BAR - - - -BOOM 105-340 AR FLG LOCKNUT (3/4-NCl 105-473 AR BOLT 13/4-NC X S u l 105-829 AR FLG LK BOLT 11/2-NC X 1 u l- - - - - - - - - - - - - - - - - - � - FOR 62P CHAIN 143-047 LTR WEAR BAR BOOM 162Pl LTR WEAR BAR BOOM 170Pl FOR 70P CHAIN 143-048 BAR BOOM 178Pl FOR 78P CHAIN 143-049 1 -LTR WEAR - 143-074 FOR 62P CHAIN W(AR BAR , 43 u LGl 143-075 WEAR BAR 155 u LG) FOR 70P CHAIN WEAR BAR 167 u LG) 143-076 FOR 78P CHAIN - - - 184-089 AR BOOM CROSSBOLT WASHER l.781 u l 184-090 AR BOOM CROSS TUBE

1.

2.

3.

4.

5.

6.

7.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

�

NOTE:

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

�-

-

-

F-1 -

ROLLER BOOM ALSO CONTAINS ROLLER AND APPROPRIATE GREASE CYLINDER BRACKETS AND HARDWARE; REFER TO PACmS TITLED UROLLER, 19 u , AND UGREASE CYLINDER BRACKETS u. THESE BOOM ASSEMBLIES EACH USE A SPECIFIC �H�IN_ Lf N�TH_ A�D - AR_E �S�D _WIIH -ON_L y - rn\J_E _OF - F Q_UR_ Bgo� T_UB� L_ ENs;T�S._ £lE� E� T_9 �A�E _:r I ILE_ D �·sgo� T�B� PART NUMBERS USING 78 PITCH CHAIN NOT RECOMMENDED FOR H500 SERIES ATTACHMENTS.

B

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

801-033

60

ROLLER BOOM {NON-WEAR BAR) 19" ROLLER

0

!

0

1 �

�--!--··

B

801-034

61

ROLLER BOOM {NON-WEAR BAR) 19" ROLLER

REF NO.

1.

2.

3.

4.

5.

6.

PART NUMBER QTY DESCRIPTION

140-545 105-319 105-340 -105-47f 143-013 184-089 184-090

5 5 1 5 5

3P LTR NON-WEAR BAR BOOM BOLT (3/4-NC X 1-1/Z"l FLG LOCKNUT (3/4-NCl 5-,, ) - - BOLT -(3/4--NC LTR BOOM - NWB BOOM CROSSBOLT WASHER (.781") BOOM CROSS TUBE

REMARKS

JNCL REF NO.'S 1 THRU 6; SEE FOOTNOTE 2

x

SEE FOOTNOTE 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

FOOTNOTES - - - - -

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

� -

1. THJS BOOM ASSEMBLY ALSO CONTAJNS ROLLER AND APPROPRJATE GREASE CYLJNDER BRACKET AND HARDWARE; REFifiR TO PAGES TITLED "ROLLER (19") AND "GREASE CYLJNDER BRACKET"). THJS BOOM MAY BE USED WJTH A VARIETY m gF_ CH_ AI� �EN_ GT�S _ BY_ U?I�G _VA�IQ_US _ Bgo� T_ UB�S '.... R_ EF�R _ TO_ P0GE;_ T_ IT�E� "_?OgM _ TU_?E�. _________� _ 2. BOLT IS USED WITH BOOM TUBES DESJGNED FOR 3.067 PJTCH CHAJNS, 70 PITCH AND LONGER. THE BOLT SCREW:8INTC THE BOTTOM SURFACE OF THE BOOM TUBE AND ACTS AS A CYLINDER STOP AND MAIN FRAME SAFETY LUG. Q -

B

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

F-1 -

801-034

62

HD LTR WEAR BAR BOOM 19" HD ROLLER

0

B

5

806-413

63

HD LTR WEAR BAR BOOM 19" HD ROLLER

REF NO.

1.

2.

3.

4.

5.

6.

7.

PART NUMBER QTY DESCRIPTION

3P HD LTR WEAR BAR BOOM 70P 141-658 3P HD LTR WEAR BAR BOOM 62P 141-659 141-660 - -BOOM - - 78P -3P- HD - LTR - - WEAR - - BAR 105-340 AR FLG LOCKNUT (3/4-NCl ° 105-473 AR BOLT 13/4-NC X 5 ) 105-829 AR FLG LK BOLT 11/2-NC X 1") - - 141-600 LTR WEAR BAR BOOM 170Pl LTR WEAR BAR BOOM 162Pl 141-599 BAR BOOM 178Pl -141-601 - - - 1 - LTR WEAR - W(AR BAR , 55" LGl 143-075 143-074 WEAR BAR 143" LG) 143-076 WEAR BAR 167" LG) - - - 184-089 AR BOOM CROSSBOLT WASHER 1.781") 184-090 AR BOOM CROSS TUBE

REMARKS

INCL REF NO.'S 1-7, 70 PITCH CHAIN & 64" BOOM TUBE INCL REF NO.'S 1-7, 62 PITCH CHAIN & 52" BOOM TUBE INCL �E� N_o<s_ 1-_7._ 7� P_lTfH_ CHA_ I� � 7 7_ " _ BQ_OM _ T�B�

-

FOR- 70P -CH-AIN FOR 62P CHAIN FOR 78P CHAIN FOR 70P CHAIN FOR 62P CHAIN FOR 78P CHAIN

-

-

-

-

-

-

-

-

-

-

-

-

-

FOOTNOTES

NOTE:

ROLLER BOOM ALSO CONTAINS ROLLER AND APPROPRIATE GREASE CYLINDER BRACKETS AND HARDWARE: REFER TO PAGES TITLED "ROLLER, 19", AND "GREASE CYLINDER BRACKETS". THESE BOOM ASSEMBLIES EACH U SE A SPECIFIC CHAIN LENGTH AND ARE U SED WITH ONLY ONE OF FOU R BOOM TUBE LENGTHS. REFER TO PAGE TITLED "BOOM TUBE".

B

806-413

64

70K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

4 1

3 2

6

7

8

9

5

REPAIR Part# 133-726 138-704 1 138-702 0 138-703 0 138-701 0 139-704 0 139-701 0 139-702 0 135-1242 16 135-1239 15 105-499 62 105-953 62 135-979 0 136-070 0 105-383 0 105-466 0 135-921 0

02

133-728 1 0 0 0 0 0 0 16 15 30 62 32 48 32 0 0

133-787 0 1 1 0 0 0 0 17 17 68 68 0 0 0 0 0

CHAIN ASSEMBLIES 133-790 133-746 134-726 0 1 0 1 1 0 1 0 0 1 0 0 0 0 1 0 0 0 0 0 0 19 20 16 19 19 15 76 78 62 76 78 62 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

134-736 0 0 0 0 1 1 0 18 17 70 70 0 0 0 0 0

134-747 0 0 0 0 1 0 1 20 19 38 78 0 0 0 40 40

134-756 0 0 0 0 1 0 2 24 23 94 94 0 0 0 0 0

ID0449257

65

70K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9

1 1 1 1 1 1 1 1 1

134-726 134-736 134-747 134-756 133-726 133-728 133-787 133-790 133-746

DESCRIPTION

REMARKS

P70K 2P DURA 62P 6.6 P70K 2P DURA 70P 6.8 P70K 2P DURA 78P 8.1 P70K 2P DURA 94P 6.62 70K 2P DURA 62P 6.6 70K 2P DURA 62P 9.62 70K 2P DURA 68P 6.6 70K 2P DURA 76P 6.6 70K 2P DURA 78P 6.8"

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-704 70K DIGGING CHAIN STD 2P (62P) 138-702 70K DIGGING CHAIN STD 2P (16P) 138-703 70K DIGGING CHAIN STD 2P (52P) 138-701 70K DIGGING CHAIN STD 2P (8P) 139-704 70K DIGGING CHAIN PREMIUM 2P (62P) 139-701 70K DIGGING CHAIN PREMIUM 2P (8P) 139-702 70K DIGGING CHAIN PREMIUM 2P (16P) 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 135-1239 DURATOOTH, LEFT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 135-979 CHAIN SPACER (2.155") 136-070 SPACER 105-383 SPECIAL BOLT (3/4-NC X 6", GD8) 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 135-921 TOOTH SPACER

FOOTNOTES:

NOTE:

1. 70K STANDARD REPAIR STATION KIT 135-1182, 70K PREMIUM REPAIR STATION KIT 135-1187, 70K MASTER PIN 135-501, & 70K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0449257

66

70K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

4 1

5

2 3

6

REPAIR Part# 138-704 138-701 138-702 138-703 139-704 139-701 139-702 135-973 135-974 135-975 135-976 135-979 135-980 105-322 105-365 105-391 105-953

01

135-776 1 0 0 0 0 0 0 7 7 12 12 38 24 14 24 24 62

135-777 1 1 0 0 0 0 0 7 7 14 14 42 28 14 28 28 70

135-789 0 1 1 1 0 0 0 8 8 15 15 48 28 16 28 32 76

CHAIN ASSEMBLIES 135-778 135-779 137-776 1 1 0 0 0 0 1 2 0 0 0 0 0 0 1 0 0 0 0 0 0 9 10 7 9 10 7 15 18 12 15 19 12 46 56 38 32 38 24 18 20 14 32 38 24 28 36 24 78 94 62

7

137-777 0 0 0 0 1 1 0 7 7 14 14 42 28 14 28 28 70

8

137-778 0 0 0 0 1 0 1 9 9 15 15 46 32 18 32 28 78

ID0449274

67

70K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-776 135-777 135-789 135-778 135-779 137-776 137-777 137-778

DESCRIPTION

REMARKS

70K 2P ALG 62P 6.8 70K 2P ALG 70P 6.8 70K 2P ALG 76P 6.4" 70K 2P ALG 78P 6.8 70K 2P ALG 94P 6.8 P70K 2P ALG 62P 6.8 P70K 2P ALG 70P 6.8 P70K 2P ALG 78P 6.8

SEE F/N 1 SEE F/N1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-704 70K DIGGING CHAIN STD 2P (62P) 138-701 70K DIGGING CHAIN STD 2P (8P) 138-702 70K DIGGING CHAIN STD 2P (16P) 138-703 70K DIGGING CHAIN STD 2P (52P) 139-704 70K DIGGING CHAIN PREMIUM 2P (62P) 139-701 70K DIGGING CHAIN PREMIUM 2P (8P) 139-702 70K DIGGING CHAIN PREMIUM 2P (16P) 135-973 LEFT OUTSIDE BIT ADAPTER 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-975 LEFT INSIDE BIT ADAPTER 135-976 E.S. BIT ADPTR. RT. INSIDE 135-979 CHAIN SPACER, 70K 135-980 CHAIN SPACER (1.405") 105-322 BOLT (3/4-NC X 4.5") 105-365 BOLT (3/4-NC X 4") 105-391 BOLT (3/4-NC X 4.5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

1. USE INSERT BIT 136-101

NOTE:

1. 70K STANDARD REPAIR STATION KIT 135-1182, 70K PREMIUM REPAIR STATION KIT 135-1187, 70K MASTER PIN 135-501, & 70K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449274

68

110K DURATOOTH CHAINS (62P&70P) 2P CHAIN ASSEMBLIES GROUP 1

1

REPAIR Part# 133-420 138-411 1 135-1534 0 135-1239 15 135-1242 16 105-499 62 105-953 62 105-372 0 105-466 0 135-921 0 136-120 0 105-321 0 105-365 0 136-070 0 105-383 0 136-121 0

01

2

133-421 1 0 15 16 30 0 62 32 32 0 0 0 0 0 0

3

133-423 1 0 19 20 30 0 78 0 24 8 16 32 0 0 0

4

6

5

CHAIN ASSEMBLIES 133-459 133-460 133-461 0 0 0 1 1 1 17 17 18 18 18 17 70 34 34 70 70 70 0 0 0 0 36 0 0 36 0 0 0 0 0 0 0 0 0 0 0 0 54 0 0 36 0 0 0

133-462 0 1 22 22 32 88 0 0 30 9 20 36 0 0 0

7

8

133-463 0 1 23 24 94 126 0 0 24 4 16 16 0 0 4

ID0441443

69

110K DURATOOTH CHAINS (62P&70P) 2P CHAIN ASSEMBLIES GROUP 1 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

133-420 133-421 133-423 133-459 133-460 133-461 133-462 133-463

DESCRIPTION

REMARKS

110K 2P DURA 62P 7.0" 110K 2P DURA 62P 8.5" 110K 2P DURA 62P 12 110K 2P DURA 70P 7.0 110K 2P DURA 70P 8.5 110K 2P DURA 70P 10 110K 2P DURA 70P 12 110K 2P DURA 70P 15

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 135-1534 110K DIGGING CHAIN STD 2P (70P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 105-372 LOCKNUT (3/4-NC) 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 135-921 TOOTH SPACER 136-120 12" TOOTH ADAPTER 105-321 BOLT (3/4-NC X 3") 105-365 BOLT (3/4-NC X 4") 136-070 SPACER 105-383 BOLT (3/4-NC X 6", GD8) 136-121 BOLT (3/4-NC X 3")

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0441443

70

110K DURATOOTH CHAINS (78P & 94P) 2P CHAIN ASSEMBLIES GROUP 2

1

01

REPAIR Part# 133-430 135-1535 1 138-411 0 138-410 0 135-1239 19 135-1242 20 105-499 78 105-953 78 135-921 0 105-466 0 136-120 0 105-321 0 105-365 0 136-121 0

133-431 1 0 0 19 20 38 78 40 40 0 0 0 0

2

3

4

CHAIN ASSEMBLIES 133-433 133-434 133-440 1 1 0 0 0 1 0 0 2 24 26 23 25 26 24 38 104 94 98 140 94 30 30 0 0 0 0 10 4 0 20 20 0 40 16 0 0 9 0

5

133-441 0 1 2 23 24 46 94 48 48 0 0 0 0

6

ID0441478

71

110K DURATOOTH CHAINS (78P & 94P) 2P CHAIN ASSEMBLIES GROUP 2 REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

133-430 133-431 133-433 133-434 133-440 133-441

DESCRIPTION

REMARKS

110K 2P DURA 78P 7.0" 110K 2P DURA 78P 8.5" 110K 2P DURA 78P 12" 110K 2P DURA 78P 15" 110K 2P DURA 94P 7.0 110K 2P DURA 94P 8.5

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1535 110K DIGGING CHAIN STD 2P (78P) 138-411 110K DIGGING CHAIN STD 2P (62P) 138-410 110K DIGGING CHAIN STD 2P (16P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 135-921 TOOTH SPACER 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 136-120 12" TOOTH ADAPTER 105-321 BOLT (3/4-NC X 3") 105-365 BOLT (3/4-NC X 4") 136-121 BOLT (3/4-NC X 3")

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0441478

72

110K COMBO CHAINS 2P CHAIN ASSEMBLIES

1

2

REPAIR Part# 131-264 138-411 1 135-1534 0 135-1535 0 135-1239 6 135-1242 6 136-276 6 136-275 7 136-274 3 136-273 3 135-975 0 135-976 0 135-974 0 135-973 0 135-978 14 135-977 48 105-365 14 105-391 24 105-473 24 105-953 62

01

3

4

5

6

CHAIN ASSEMBLLIES: 131-266 131-268 131-269 131-270 0 0 1 0 1 0 0 1 0 1 0 0 7 7 6 7 6 8 6 6 7 8 0 0 7 8 0 0 4 4 0 0 4 4 0 0 0 0 7 7 0 0 6 7 0 0 3 4 0 0 3 4 16 16 14 16 54 62 48 54 16 16 14 16 26 30 24 26 28 32 24 28 70 78 62 70

131-271 0 0 1 7 8 0 0 0 0 8 8 4 4 16 62 16 30 32 78

ID0449237

73

110K COMBO CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

131-264 131-266 131-268 131-269 131-270 131-271

DESCRIPTION

REMARKS

110K 2P CMB DURA/SHK B 62P 6.0 110K 2P CMB DURA/SHK 70P 6.0" 110K 2P CMB DURA/SHK 78P 6.0" 110K 2P CMB DURA/ALG 62P 6.0" 110K 2P CMB DURA/ALG 70P 6.0" 110K 2P ALG B-O CMB 78P 6.0

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 135-1534 110K DIGGING CHAIN STD 2P (70P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 136-276 70/110K RT INSIDE BOLT-ON SHARK ADAPTER 136-275 70/110K LEFT INSIDE BOLT-ON SHARK ADPTER 136-274 70/110K LFT OUTSIDE BOLT-ON SHARK ADPTER 136-273 70/110K RT OUTSIDE BOLT-ON SHARK ADAPTER 135-975 LEFT INSIDE BIT ADAPTER 135-976 E.S. BIT ADPTR. RT. INSIDE 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-973 LEFT OUTSIDE BIT ADAPTER 135-978 CHAIN SPACER (1.593") 135-977 CHAIN SPACER (2.343") 105-365 BOLT (3/4-NC X 4") 105-391 BOLT (3/4-NC X 4.5") 105-473 BOLT (3/4-NC X 5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449237

74

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3

1

4 3 2

6

7

5 REPAIR Part# 134-420 139-411 1 139-412 0 135-1239 15 135-1242 16 105-499 62 105-953 62 105-466 0 135-921 0 136-070 0 105-383 0 135-977 0 136-071 0 105-365 0 105-321 0

02

134-421 1 0 15 16 30 62 32 32 0 0 0 0 0 0

CHAIN ASSEMBLIES 134-422 134-423 134-459 1 1 1 0 0 1 15 19 17 16 20 18 30 30 70 62 78 70 0 0 0 0 24 0 48 32 0 32 0 0 32 0 0 0 8 0 0 32 0 0 16 0

134-460 1 1 18 17 34 70 36 36 0 0 0 0 0 0

134-461 1 1 18 17 34 70 0 0 54 36 36 0 0 0

ID0449310

75

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 3 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7

1 1 1 1 1 1 1

134-420 134-421 134-422 134-423 134-459 134-460 134-461

DESCRIPTION

REMARKS

P110K 2P DURA 62P 7.0 P110K 2P DURA 62P 8.5 P110K 2P DURA 62P 10" P110K 2P DURA 62P 12" P110K 2P DURA 70P 7.0 P110K 2P DURA 70P 8.5 P110K 2P DURA 70P 10

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 139-412 110K DIGGING CHAIN PREMIUM 2P (8P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-953 LOCKNUT (3/4-NC) 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 135-921 TOOTH SPACER 136-070 SPACER 105-383 BOLT (3/4-NC X 6", GD8) 135-977 CHAIN SPACER (2.343") 136-071 10" - 12"" TOOTH ADAPTER 105-365 BOLT (3/4-NC X 4") 105-321 BOLT (3/4-NC X 3")

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0449310

76

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4

5 4

2

3

1

REPAIR Part# 134-462 139-411 1 139-410 0 139-412 1 135-1239 22 135-1242 22 105-499 32 105-466 0 105-953 88 105-321 20 105-365 36 135-921 30 136-070 36 136-071 9 136-088 0 105-383 0

01

CHAIN ASSEMBLIES 134-464 134-430 134-431 1 1 1 0 1 1 1 0 0 23 20 19 24 19 20 30 78 38 0 0 40 94 78 78 16 0 0 16 0 0 24 0 40 32 0 0 4 0 0 8 0 0 32 0 0

134-433 1 1 0 24 25 38 0 98 20 40 30 40 10 0 0

ID0449331

77

110K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES GROUP 4 REF PART NO. NUMBER

QTY

1 2 3 4 5

1 1 1 1 1

134-462 134-464 134-430 134-431 134-433

DESCRIPTION

REMARKS

P110K 2P DURA 70P 11 P110K 2P DURA 70P 15" P110K 2P DURA 78P 7.0 P110K 2P DURA 78P 8.5 P110K 2P DURA 78P 12

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

139-411 110K DIGGING CHAIN PREMIUM 2P (62P) 139-410 110K DIGGING CHAIN PREMIUM 2P (16P) 139-412 110K DIGGING CHAIN PREMIUM 2P (8P) 135-1239 DURATOOTH, LEFT 3/8" 70-110K 135-1242 DURATOOTH, RIGHT 3/8" 70-110K 105-499 BOLT (3/4-NC X 1-3/4") 105-466 BOLT (3/4-NC X 2-1/2", GD 5) 105-953 LOCKNUT (3/4-NC) 105-321 BOLT (3/4-NC X 3") 105-365 BOLT (3/4-NC X 4") 135-921 TOOTH SPACER 136-070 SPACER 136-071 10" - 12"" TOOTH ADAPTER 136-088 "14" - 16" TOOTH ADAPTER" 105-383 BOLT (3/4-NC X 6", GD8)

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449331

78

110K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

2

3

4

1

5

6

7 8

REPAIR Part# 135-485 138-411 1 139-411 0 139-412 0 139-410 0 138-410 0 135-1534 0 135-1535 0 135-976 12 135-975 12 135-974 7 135-973 7 135-978 24 135-977 38 105-365 24 105-473 24 105-322 14 105-953 62

01

135-486 0 0 0 0 0 1 0 14 14 7 7 28 42 28 28 14 70

135-487 0 0 0 0 0 0 1 15 15 9 9 32 46 32 28 18 78

CHAIN ASSEMBLIES 135-488 137-485 137-486 1 0 0 0 1 1 0 0 1 0 0 0 2 0 0 0 0 0 0 0 0 18 12 14 19 12 14 10 7 7 10 7 7 38 24 28 56 38 42 38 24 28 36 24 28 20 14 14 94 62 70

137-487 0 1 0 1 0 0 0 15 15 9 9 32 46 32 28 18 77

137-488 0 1 0 2 0 0 0 19 18 10 10 38 56 38 36 20 94

ID0449362

79

110K ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-485 135-486 135-487 135-488 137-485 137-486 137-487 137-488

DESCRIPTION

REMARKS

110K 2P ALG 62P 6.7 110K 2P ALG 70P 6.6" 110K 2P ALG 78P 6.6" 110K 2P ALG 94P 6.8 P110K 2P ALG 62P 6.8 P110K 2P ALG 70P 6.8 P110K 2P ALG 78P 6.8 P110K 2P ALG 94P 6.8

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

138-411 110K DIGGING CHAIN STD 2P (62P) 139-411 110K DIGGING CHAIN PREMIUM 2P (62P) 139-412 110K DIGGING CHAIN PREMIUM 2P (8P) 139-410 110K DIGGING CHAIN PREMIUM 2P (16P) 138-410 110K DIGGING CHAIN STD 2P (16P) 135-1534 110K DIGGING CHAIN STD 2P (70P) 135-1535 110K DIGGING CHAIN STD 2P (78P) 135-976 E.S. BIT ADPTR. RT. INSIDE 135-975 LEFT INSIDE BIT ADAPTER 135-974 E.S. BIT ADPTR. RT. OUTSIDE 135-973 LEFT OUTSIDE BIT ADAPTER 135-978 CHAIN SPACER (1.593") 135-977 CHAIN SPACER (2.343") 105-365 BOLT (3/4-NC X 4") 105-473 BOLT (3/4-NC X 5") 105-322 BOLT (3/4-NC X 4.5") 105-953 LOCKNUT (3/4-NC)

FOOTNOTES:

NOTE:

1. 110K STANDARD REPAIR STATION KIT 131-131, 110K PREMIUM REPAIR STATION KIT 135-1149, 110K MASTER PIN 137-401, & 110K LOCK KEY 135-402 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0449362

80

SPECIAL TOOLS

3 2 1

3

02

ID0113949

81

SPECIAL TOOLS REF PART NO. NUMBER

1.

2.

3.

QTY

259-500 259-498 259-499

1 1 2

DESCRIPTION

REMARKS

SPROCKET CENTERING ARM SEAL DRIVER SEAL CLAMP

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0113949

82

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS

HAMMER 3 5

4

SLIDE HAMMER 3 1

2

H

801-056

83

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS REF PART NO. NUMBER

1.

2.

3.

4.

5.

259-002 259-001 259-036 105-403 105-357 183-072 259-003

QTY

1 1 2 1 1

DESCRIPTION

REMARKS

BIT PULLER - SLIDE HAMMER BIT PULLER - HAMMER BIT PULLER JAM NUT (5/8-NC) LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER

INCL REF NO.'S 1 - 5 EARLY STYLE

FOOTNOTES

NOTE:

H

801-056

84

SPECIAL TOOLS - ALIG BIT PUNCH

5

3

4

1 9 2 8

6

H

7

801-057

85

SPECIAL TOOLS - ALIG BIT PUNCH REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

259-150 105-708 105-964 105-994 183-072 259-003 259-151 259-152 259-153 105-357

QTY

DESCRIPTION

REMARKS

INCL REF NO.'S 1 THRU 8

2 1 1 1 1 1 1 1 1

BIT PUNCH - SLIDE HAMMER SET SCREW (3/8-NC X 3/8", NLK) WASHER (.656") FLG LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER HEAVY BIT PUNCH-SLIDE HAMMER LIGHT BIT PUNCH-SLIDE HAMMER PUNCH ADAPTER-SLIDE HAMMER LOCKNUT (5/8-NC)

FOOTNOTES

NOTE:

H

801-057

86

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

87

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

88

NOTES:

ID0134963

89

ELECTRICAL

90

RT ELECTRCIAL SCHEMATIC REFERENCE (BY MACHINE MODEL) FOR USE WITH RT ATTACHMENTS

 RT125Q PARTS BOOK MANUAL #053‐2888 USE #ID0416982 ELECTRICAL SCHEMATIC  RT125 PARTS BOOK MANUAL #053‐2890 USE #ID0416982 ELECTRICAL SCHEMATIC  RT105 PARTS BOOK MANUAL #053‐2889 USE #ID0423159 ELECTRICAL SCHEMATIC

VER 01

ID0423168

91

MISCELLANEOUS

92

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

93

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

94

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

95

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

96

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which are D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

97

98

DT100M ATTACHMENT Related Publications Component

Ass’y

P/N

Model: DT100M Parts Manual .......................................................................... ........... 053-2910 RT105 Operators Manual ..................................................................... ........... 053-2943

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ............................... 190-051 O-ring Repair Kit - Field Service (46 different O-rings) ...................................... 190-052

VER 01

ID0424911

99

ID0040564

100

ID0135281