Ditch Witch C12X / C16X / C24X / C30X Trencher Parts Manual 053-2871 PDF

C12X/C16X/ C24X/C30X Parts Manual

Issue 16

053-2871

1

C12X/C16X C24X/C30X ISSUE NO. 16PL-07/23 For Replacement Copy Order P/N 053-2871

This product and its use may be coverd by one or more patents at http://patents.charlesmachine.works

This manual contains information concerning the following models: C12X/C16X/C24X/C30X

Copyright 2016, 2017, 2018, 2019, 2021, 2022, 2023 by The Charles Machine Works, Inc.

, Ditch Witch, AutoCrowd, Roto Witch, and CMW are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY ______________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy July 2019

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY •

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse (including, but not limited to, rollover), abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 07

ID0134872

5

CONTENTS _______________________ Decals

Electrical

C12X ............................................................ 8 C16X .......................................................... 10 C24X .......................................................... 12 C30X .......................................................... 14

Cables, Battery – Black ............................. 116 Cables, Battery – Red ............................... 114 Diagram – Fan Harness C16X/C16................. 102 Diagram – Fan Harness C24X/C24................. 104 Diagram – C24X/C24 ................................. 108 Diagram – C30X/C30 ................................. 112 Schematic – C16/C16X ................................ 92 Schematic – C24X/C24 ................................ 94 Schematic – C30X ....................................... 98

Engine Components C12X .......................................................... 18 C16X .................................................... 20, 22 C24X .............................................. 24, 26, 28 C30X/VP30 .......................................... 30, 32 Fuel Tank – C24X/C30X .......................... 34, 36

Powertrain Cast Roller Kit ............................................ 44 Track Assembly, Left ................................. 40 Track Assembly, Right ............................... 42

Frame Components Cooler Tower............................................. 52 Frame .................................................. 48, 50 Pivot Assembly .......................................... 54 Sprocket Option ........................................ 56

Control Components Brackets & Extension – C12X ..................... 64 Control Tower ..................................... 60, 62 GPS Kit – CLM3000 ...................................... 66

Hydraulics Attachment Drive ...................................... 82 Attachment Lift ......................................... 84 Ground Drive – C12X .................................. 70 Ground Drive – C16X ...................... 72, 74, 76 Ground Drive – C24X/C30X .......................... 80 Ground Drive – C30X .................................. 78 Schematics ................................................ 88 Variable Speed Drive Option ..................... 86

Accessories Auger Support Update Kit ....................... 158 Backfill Blade .......................................... 120 Boom Assemblies – 19K Non-Lube ............. 144 Boom Assemblies – 35K Non-Lube ............. 146 Chains, Alligator/Duratooth 35K– 2P ....... 132 Chains, Duratooth 35K – 4P ..................... 128 Chains, Duratooth 35K– 2P...................... 130 Chains, Shark/Alligator 35K – 2P ............. 136 Chains, Shark/Duratooth 35K – 2P .......... 134 EC Kit – C12X ............................................ 150 EC Kit – C16X/C24X/C30X ............................ 148 GPS Kit Location – C12/C12X ..................... 154 HD GPS Location – C12X........................... 156 Rotowitch ............................................... 138 Sunbelt GPS Kit – C16X/C24X/C30X ............. 152 Trench Cleaner................................ 140, 142 Weight Kit, 35K – 48” Cup and Combo ......... 124 Weight Kit, 35K – 48” Shark II .................... 126 Weights, 35K – 36” Shark II ........................ 122

Miscellaneous Bolt/Nut Torque Chart ............................ 162 Filters ...................................................... 168 Optional Kits ........................................... 168 Related Publications ............................... 168 Replacement O-Ring Chart ..................... 167 Warranty Registration ............................ 170

ID0402535

6

7

DECALS

8

DECAL LOCATION C12X 20 19

14

12 9 6 4 1 3

8

7

15 3 11

21 13

16

2 10 17

3 9 6

18

4

5

4

06

19

ID0456477

9

DECAL LOCATION C12X REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

270-6899 700-063 274-442 274-318 270-6968 270-7678 270-6828 270-6829 270-6827 270-6911 270-6893 270-6773 700-009 270-7712 701-419 270-7792 700-143 270-6705 270-6908 270-7791 270-8213

DESCRIPTION

REMARKS

C12X SERVICE DECAL KIT

270-7688 1 1 4 3 1 2 1 1 2 1 1 1 1 1 1 1 1 1 4 1 1

PARKING BRAKE HYDRAULIC OIL CAP LIFT LOCATION TIE DOWN LOCATION NOTICE HYDRAULIC OIL LEVEL ISO C12X MODEL ID CONTROL PANEL DIGGING CHAIN FORWARD/REVERSE STACKED GRAY LOGOTYPE WARNING ONE CALL ISO DIGGING BOOM RAISE AND LOWER PATENT CAUTION WEAR HEARING PROTECTION C12X LUBE CHART WARNING NO FLAME ISO OPERATOR MANUAL REPLACEMENT ISO WARNING READ OPERATOR MANUAL OPERATOR INSTRUCTIONS (ROPE START) DANGER CHAIN AND AUGER ISO UNLEADED GASOLINE ONLY ISO 811 LOGO

SEE FOOTNOTE 1

FOOTNOTES

1 . NOT PART OF KIT

06

ID0456477

10

DECAL LOCATION C16X 8

22 8 20

15 8 10

1

7 3

12

16

21

13

18 27

14

24

9

17

6

5 23

11

3 8 12

9

25 26

19

4

19

10

2

ID0390339

11

DECAL LOCATION C16X REF PART NO. NUMBER

QTY

270-6932 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

270-7792 270-6899 270-6827 270-5127 270-6704 700-143 270-6738 274-442 270-6908 270-6894 270-7807 270-6844 270-6828 270-6968 270-7791 700-063 700-143 270-6829 274-318 270-6893 270-4549 701-419 270-6773 700-009 270-7089 270-7019 270-8213

DESCRIPTION

REMARKS

C16X SERVICE DECAL KIT 1 1 2 1 1 1 1 4 4 1 1 2 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1

OPERATOR MANUAL REPLACEMENT ISO PARKING BRAKE STACKED LOGOTYPE BATTERY OPERATOR INSTRUCTIONS WARNING READ MANUAL ISO LOGO LIFT LOCATION DANGER CHAIN AND AUGER ISO LOGOTYPE TRENCHER FLOW CONTROL VALVE C16X MODEL ID CONTROL PANEL NOTICE HYDRAULIC OIL LEVEL ISO UNLEADED GASOLINE ONLY ISO HYDRAULIC OIL CAP WARNING ONE CALL ISO DIGGING CHAIN FORWARD/REVERSE TIE DOWN TRENCHER RAISE/LOWER ROTOWITCH WARNING NO FLAME ISO PATENT CAUTION WEAR HEARING PROTECTION C16X SERVICE / LUBE CHART ISO NOTICE FUEL SHUTOFF ISO 811 LOGO

SEE FOOTNOTE 2.

SEE FOOTNOTE 1.

SEE FOOTNOTE 3.

FOOTNOTES

1. NOT PART OF KIT. USE ONLY WITH ROTO WITCH OPTION. 2. NOT PART OF KIT. USE ONLY WITH VARIABLE FLOW OPTION. 3. NOT PART OF KIT.

10

ID0390339

12

DECAL LOCATION C24X 8 1 8 10 2 7 3 12 4 9 5

21

13

18 25

24 17

23 3 8

6

14 12 9

11

19

16

15 22 19

10

20

ID0389303

13

DECAL LOCATION C24X REF PART NO. NUMBER

QTY

270-6937 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

270-7792 270-6893 270-6827 700-063 270-6968 700-143 270-6738 274-442 270-6908 270-6894 270-7097 270-6845 270-6828 270-6704 270-7791 270-5127 270-6911 270-6829 274-318 270-6899 270-4549 701-419 270-6773 700-009 270-8213

DESCRIPTION

REMARKS

C24X SERVICE DECAL KIT 1 1 2 1 1 1 1 4 4 1 1 2 1 1 1 1 1 1 3 1 1 1 1 1 1

OPERATOR MANUAL REPLACEMENT ISO TRENCHER RAISE/LOWER STACKED LOGOTYPE HYDRAULIC OIL CAP NOTICE HYDRAULIC OIL LEVEL ISO WARNING READ MANUAL ISO LOGO LIFT LOCATION DANGER CHAIN AND AUGER ISO LOGOTYPE C24X SERVICE/LUBE CHART ISO C24X MODEL ID CONTROL PANEL OPERATOR INSTRUCTIONS UNLEADED GASOLINE ONLY ISO BATTERY WARNING ONE CALL ISO DIGGING CHAIN FORWARD/REVERSE TIE DOWN PARKING BRAKE ROTO WITCH WARNING NO FLAME ISO PATENT CAUTION WEAR HEARING PROTECTION 811 LOGO

SEE FOOTNOTE 1

SEE FOOTNOTE 2

FOOTNOTES

1. NOT PART OF KIT. USE ONLY WITH ROTO WITCH OPTION. 2. NOT PART OF KIT.

10

ID0389303

14

DECAL LOCATION C30X 8 1 8 12

20

10 7 3

16 21

13

18

14

26

9

24 17 6

23 3 11 5 8 12 9

25

19

4 22 15 19

12

2

ID0389636

15

DECAL LOCATION C30X REF PART NO. NUMBER

QTY

270-6942 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

270-7792 270-6899 270-6827 270-5127 270-6704 700-143 270-6738 274-442 270-6908 270-6894 270-7875 270-6768 270-6828 270-6968 270-7791 700-063 270-6911 270-6829 274-318 270-6893 270-4549 701-419 270-6773 700-009 270-7137 270-8213

DESCRIPTION

REMARKS

C30X SERVICE DECAL KIT 1 1 2 1 1 1 1 4 4 1 1 2 1 1 1 1 1 1 3 1 1 1 1 1 1 1

OPERATOR MANUAL REPLACEMENT ISO PARKING BRAKE STACKED LOGOTYPE BATTERY OPERATOR INSTRUCTIONS WARNING READ MANUAL ISO LOGO LIFT LOCATION DANGER CHAIN AND AUGER ISO LOGOTYPE CALIFORNIA COMPLIANCE EXEMPT ENGINE C30X MODEL ID CONTROL PANEL NOTICE HYDRAULIC OIL LEVEL ISO UNLEADED GASOLINE ONLY ISO HYDRAULIC OIL CAP WARNING ONE CALL ISO DIGGING CHAIN FORWARD/REVERSE TIE DOWN TRENCHER RAISE/LOWER ROTO WITCH WARNING NO FLAME ISO PATENT CAUTION WEAR HEARING PROTECTION C30X SERVICE / LUBE CHART ISO 811 LOGO

SEE FOOTNOTE 2

SEE FOOTNOTE 1

FOOTNOTES:

1. NOT PART OF KIT. 2. NOT PART OF KIT. USE ONLY WITH ROTO WITCH OPTION

12

ID0389636

16

NOTES:

ID0134963

17

ENGINE COMPONENTS

18

ENGINE C12X

1

11 10 12 5

9

6 4

7

2 8 3

03

ID0459246

19

ENGINE C12X

REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12

1 ENGINE (HONDA GX390 11.7 HP, RP) 2 BOLT (3/8-NC X 1-1/4", SOC, GD8, ZP) 2 WASHER (M10, HARDENED) 4 FLG SCREW (M10-1.50 X 50MM) 10.9 ZP 4 FLG LKNUT (M10-1.50, PRV TRQ) 1 DOUBLE GEAR PUMP (6.6 CC/1.6 CC) 1 PUMP MOUNT KIT - 1.00 3 FLG BOLT (3/8-NC X 1-1/4") 1 KEY (1/4" X 2-1/4") 1 NIPPLE (04N-3" 304SS) 1 CAP (04NF) 1 CONNECTOR (M12-1.50-04NF)

195-1608 105-757 106-396 105-1980 107-661 150-4152 160-1297 105-677 165-985 150-4591 115-241 514-442

DESCRIPTION

REMARKS

5W30 1.2 QT USE LOCTITE 242 OR EQUIVALENT. TORQUE TO 44 FT-LB.

SEE FOOTNOTE 1 USE LOCTITE PIPE SEALANT

NOT SHOWN:

FOOTNOTES:

1. 160-1297 PUMP MOUNT KIT - 1.00 COMPONENTS. 160-1193 FLANGED COUPLER (1.000", 160-1194 FLANGED COUPLER (9T .625) AND 160-1195 SPIDER INSERT. TORQUE COUPLING TO 19 FT-LB. USE LOCTITE 242.

NOTE:

03

ID0459246

20

ENGINE/ ELECTRICAL

C16X BEGINS WITH S/N: DWPC16XATH0000978

2

3

33 1

5

29

6

4

28 35 36

27 19

37 26

21

31

30

25

34 40

7

24 8

20

13

18

23

10

14 12 39

38

16

9

41 15

11

17 32 22 05

ID0454059

21

ENGINE/ ELECTRICAL

C16X BEGINS WITH S/N: DWPC16XATH0000978 REF PART NO. NUMBER

QTY

1 195-2403 2 195-1794 3 500-2807 4 195-1481 5 160-1297 6 105-677 7 165-985 8 195-1480 9 500-2809 10 500-2808 11 215-0060 12 215-0042 13 106-561 14 105-226 15 106-712 16 106-385 17 106-848 18 500-2093 19 195-1482 20 105-1876 21 105-797 22 106-538 23 302-2531 24 107-859 25 215-1863 26 115-106 27 150-4591 28 115-241 29 500-2812 30 215-0071 31 106-394 32 302-3982 33 195-1479 34 195-2478 35 195-2477 36 195-2476 37 195-2475 38 302-3983 39 105-665 40 106-237 41 140-2076

1 ENGINE - 16 HP B & S VANGUARD W/TANK 1 FILTER ELEMENT 1 FUEL CAP - 16 VANGUARD 1 FUEL PUMP 1 PUMP MOUNT KIT - 1.00 4 FLG BOLT (3/8-NC X 1-1/4") 1 KEY (1/4" X 2-1/4") 1 FUEL FILTER 1 STARTER 1 SOLENOID - STARTER 1 BATTERY CABLE (6GA x 36", RED) 1 BATTERY CABLE (6GA X 33", BLK) 4 LOCKNUT (M8-1.25,PRV TRQ,10.9) 4 WASHER (5/16") 2 FLG SCREW (M6-1.00 X 16MM) 2 FLG LOCKNUT (M6-1.00) 4 FLG SCREW (M6-1.00 X 25MM) 1 OIL FILTER 1 KEY SWITCH 2 SCREW (#6-32 X 5/8", SOC ZP) 3 SCREW (M6-1.00 X 20MM, BX) 4 LOCKNUT (M6-1.00,PRV TRQ,10.9) 1 MANUAL COMPARTMENT - VENTED 2 NUT, LOCK, #6-32, NYLON INSERT 1 TACHOMETER/HOURMETER 1 REDUCER (06N-04NF) 1 NIPPLE (04N-3" 304SS) 1 CAP (04NF) 1 THROTTLE CABLE 1 FAN HARNESS 1 WASHER (M6, HARDENED) 1 BATTERY TRAY 1 PRE-CLEANER 1 KEY 1 LOCK WASHER 1 NUT - SWITCH 1 COVER - SWITCH 1 BATTERY HOLD DOWN 4 FLG SCREW (M8-1.25 X 55MM) 3 LOCKNUT (M6-1.00,PRV TRQ,NLK) 1 BATTERY [230 CCA, WET]

NOT SHOWN:

195-2631 195-2645 500-3267

DESCRIPTION

REMARKS

USE 5W30 1.4QT (47OZ)

SEE FOOTNOTE 1

USE LOCTITE PIPE SEALANT USE LOCTITE PIPE SEALANT

BEGINS WITH S/N

STATOR REGULATOR OIL DIPSTICK

FOOTNOTES:

1. 160-1297 PUMP MOUNT KIT - 1.00 COMPONENTS: 160-1193 FLANGED COUPLER (1.000"), 160-1194 FLANGED COUPLER (9T .625), AND 160-1195 SPIDER INSERT. TORQUE COUPLING BOLT 19 FT-LB. USE LOCTITE 242.

NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0425438

05

ID0454059

22

ENGINE/ ELECTRICAL

C16X ENDS WITH S/N: DWPC16XACH0000977

2

39 3 1 33 41 42

5

4

32 23

6 7

43 31 25 30 40

28 35

34

29 24

26

8 12

27

10

14

22

18 17

14

36

20

13

9 11

37 19

16 15

21 38 26 09

ID0425438

23

ENGINE/ ELECTRICAL

C16X ENDS WITH S/N: DWPC16XACH0000977 REF PART NO. NUMBER

QTY

1 195-2403 2 195-1794 3 500-2807 4* 195-1481 5 160-1297 6 105-677 7 165-985 8 195-1480 9 500-2809 10 500-2808 11 215-0060 12 215-0042 13 105-089 14 105-226 15 215-256 16 106-712 17 106-385 18 105-130 19 362-1869 20 107-025 21 106-161 22 500-2093 23 195-1482 24 105-1876 25 105-797 26 106-237 27 302-2531 28 107-859 29 215-1863 30 115-106 31 150-4591 32 115-241 33 500-2812 34 215-0071 35 106-394 36 117-1066 37 107-801 38 302-2875 39 195-1479 40 195-2478 41 195-2477 42 195-2476 43 195-2475

1 ENGINE - 16 HP B & S VANGUARD W/TANK 1 FILTER ELEMENT 1 FUEL CAP - 16 VANGUARD 1 FUEL PUMP 1 PUMP MOUNT KIT - 1.00 4 FLG BOLT (3/8-NC X 1-1/4") 1 KEY (1/4" X 2-1/4") 1 FUEL FILTER 1 STARTER 1 SOLENOID - STARTER 1 BATTERY CABLE (6GA x 36", RED) 1 BATTERY CABLE (6GA X 33", BLK) 4 LOCKNUT (5/16-NC) 6 WASHER (5/16") 1 BATTERY (12V, 200 AMP) 2 FLG SCREW (M6-1.00 X 16MM) 2 FLG LOCKNUT (M6-1.00) 4 BOLT (5/16-NC X 2-1/4") 1 PLASTIC BATTERY BOX 2 SCREW (M6-1.00 X 50MM) 2 FLG SCREW (M6-1.00 X 20MM) 1 OIL FILTER 1 KEY SWITCH 2 SCREW (#6-32 X 5/8", SOC ZP) 3 SCREW (M6-1.00 X 20MM, BX) 7 LOCKNUT (M6-1.00,PRV TRQ,NLK) 1 MANUAL COMPARTMENT - VENTED 2 NUT, LOCK, #6-32, NYLON INSERT 1 TACHOMETER/HOURMETER 1 REDUCER (06N-04NF) 1 NIPPLE (04N-3" 304SS) 1 CAP (04NF) 1 THROTTLE CABLE 1 FAN HARNESS 1 WASHER (M6, HARDENED) 1 ABRASION SLEEVE (1.75" DIA.X 4.0") 2 WASHER (M6) 1 BRACKET - BATTERY SUPPORT 1 PRE-CLEANER 1 KEY 1 LOCK WASHER 1 NUT - SWITCH 1 COVER - SWITCH

NOT SHOWN:

195-2631 195-2645 500-3267

DESCRIPTION

REMARKS

USE 5W30 1.4QT (47OZ)

SEE FOOTNOTE 1

OBSOLETE. USE 140-2076 BATTERY [230 CCA, WET]

USE LOCTITE PIPE SEALANT USE LOCTITE PIPE SEALANT

STATOR REGULATOR OIL DIPSTICK

FOOTNOTES:

1. 160-1297 PUMP MOUNT KIT - 1.00 COMPONENTS: 160-1193 FLANGED COUPLER (1.000"), 160-1194 FLANGED COUPLER (9T .625), AND 160-1195 SPIDER INSERT. TORQUE COUPLING BOLT 19 FT-LB. USE LOCTITE 242.

NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0397678

09

ID0425438

24

ENGINE ELECTRICAL

C24X BEGINS WITH S/N: DWPC24XAHL0002381

21

7 10

22

45

13 42

49

2 9

12 24

TO FUEL TANK VENT 16 19

43 35

44

41 20

25

33

32

8

TO FUEL TANK PICK UP

26

29

15 11

28

44

31 30

4

9

1

5

17 18

6 39

29

23

28 14

28 27

37 40

34

3 9

46 47

36

02

38

5

48

ID0728543

25

ENGINE ELECTRICAL

C24X BEGINS WITH S/N: DWPC24XAHL0002381 REF PART NO. NUMBER

QTY

1 195-2200 2 195-1530 3 301-9878 4 105-677 5 106-712 6 106-237 7 106-163 8 107-096 9 106-379 10 195-2345 11 105-797 12 150-5195 13 105-1519 14 107-366 15 195-1533 16 195-1536 17 215-2282 18 195-1581 19 195-1546 20 195-1583 21 194-038 22 194-039 23 215-1328 24 362-2613 25 105-757 26 106-396 27 105-162 28 106-390 29 105-047 30 302-2531 31 166-825 32 106-083 33 105-091 34 106-385 35 150-4906 36 302-3982 37 302-3983 38 106-538 39 106-848 40 140-2076 41 303-2897 42 157-943 43 154-076 44 160-1298 45 111-119 46 215-0072 47 215-0042 48 215-0060 49 150-5021

1 HONDA ENGINE (GX690) W/O AIR 1 MUFFLER 1 CONTROL MOUNT 4 FLG LK BOLT (3/8-NC X 1-1/4" GD5 NLK) 4 FLG SCREW (M6-1.00 X 16MM) 7 LOCKNUT (M6-1.00,PRV TRQ,NLK) 2 FLG SCREW (M8-1.25 X 30MM) 2 LOCKNUT (M8-1.25, NLK) 6 FLG LK SCREW (M6-1.00 X 20MM) 1 AIR FILTER (DONALDSON W/PORT) 3 SCREW (M6-1.00 X 20MM, BLK) 1 S/O COUPLER (04H-06H) 8 BULK HOSE (3/8") LOW PERM 2 SCREW (M6-1.00 X 30MM, 8.8) 1 OIL FILTER (HONDA GX690) 1 FUEL FILTER (HONDA GX690) 1 SWITCH ASSEMBLY 1 IGNITION KEY (HONDA GX690) RT12 2 SPARK PLUG (HONDA GX690) 1 FUEL PUMP (HONDA GX690) 1 FILTER ELEMENT, PRIMARY 1 FILTER ELEMENT - SECONDARY 1 RECTIFIER ASSY. REGULATOR 4 CLAMP - SQUEEZE (.569-.650) 2 BOLT (3/8-NC X 1-1/4", SOC, ZP) 2 WASHER (M10, HARDENED) 4 BOLT (3/8-NC X 2-1/4") 9 WASHER (M10) 4 LOCKNUT (3/8-NC) 1 MANUAL COMPARTMENT - VENTED 1 KEY (1/4" X 1-1/4") 1 SCREW (M8-1.25 X 20MM) 1 LOCK WASHER (5/16") 2 FLG LOCKNUT (M6-1.00) 1 CONNECTOR (M20S-06SF) 1 BATTERY TRAY 1 BATTERY HOLD DOWN 4 LOCKNUT (M6-1.00,PRV TRQ,10.9) 4 FLG SCREW (M6-1.00 X 25MM) 1 BATTERY [230 CCA, WET] 1 BRACKET 1 S/O COUPLER (06H-06H90) 1 CONNECTOR (06J-06S) 1 PUMP MOUNT KIT - 1.125 1 STACK CAP 1 FAN HARNESS 1 BATTERY CABLE (6GA X 33", BLK) 1 BATTERY CABLE (6GA x 36", RED) 1 DRAIN HOSE (06JM-06JFX90S-16"-400)

DESCRIPTION

REMARKS

5W30 (1.8QT) USE REPLACEMENT THROTTLE CABLE 500-3269

USE 2" AND 6"

USE LOCTITE 242 OR EQUIVALENT

SEE FOOTNOTE 1

FOOTNOTES:

1. PUMP MOUNT KIT 160-1298 COMPONENTS: 160-1217 FLANGED COUPLER (1.25"), 160-1218 FLANGED COUPLER (9T-.625") AND 160-1219 SPIDER INSERT GREEN. TORQUE COUPLING BOLT TO 35 FT-LB. USE LOCTITE 242.

NOTE:

195-1582 STARTER (HONDA GX690).

THIS PARTS PAGE SUPERSEDES ID0454397

02

ID0728543

26

ENGINE ELECTRICAL C24X BEGINS WITH S/N: DWPC24XAAH0000750 : ENDS WITH CMW S/N: DWPC24XALL0002380

29 28 26

31

32

30 21

40 33

25

45 14 TO FUEL TANK PICK-UP

43 3

19 18

2

44

37

22 23 30

24

38 39

4

20

5 8

6 5 9

1

41 27

17 16

7 9 49

9

6 10

6

11

12

47

13 14 26 42

40

50 TO FUEL TANK VENT

15 36 34

46 27 05

48

35

ID0454397

27

ENGINE ELECTRICAL C24X BEGINS WITH S/N: DWPC24XAAH0000750 : ENDS WITH CMW S/N: DWPC24XALL0002380 REF PART NO. NUMBER

QTY

DESCRIPTION

1 195-2200 1 HONDA ENGINE (GX690) W/O AIR 2 195-1546 2 SPARK PLUG (HONDA GX690) 3 195-1536 1 FUEL FILTER (HONDA GX690) 4 195-1533 1 OIL FILTER (HONDA GX690) 5 105-047 4 LOCKNUT (3/8-NC) 6 106-390 9 WASHER (M10) 7 302-2531 1 MANUAL COMPARTMENT - VENTED 8 105-797 3 SCREW (M6-1.00 X 20MM, BX) 9 106-237 7 LOCKNUT (M6-1.00,PRV TRQ,NLK) 10 215-1328 1 RECTIFIER ASSY. REGULATOR 11 107-366 2 SCREW (M6-1.00 X 30MM, 8.8) 12 105-162 4 BOLT (3/8-NC X 2-1/4") 13 301-9878 1 CONTROL MOUNT 14 106-379 6 FLG LK SCREW (M6-1.00 X 20MM) 15 106-385 2 FLG LOCKNUT (M6-1.00) 16 195-1581 1 IGNITION KEY (HONDA GX690) RT12 17 215-2282 1 SWITCH ASSEMBLY 18 160-1298 1 PUMP MOUNT KIT - 1.125 19 105-757 2 BOLT (3/8-NC X 1-1/4", SOC, GD8, ZP) 20 106-396 2 WASHER (M10, HARDENED) 21 195-1530 1 MUFFLER 22 301-9876 1 AIR FILTER MOUNT 23 105-2185 1 P-CLAMP (.625) 24 195-1583 1 FUEL PUMP (HONDA GX690) 25 195-2345 1 AIR FILTER (DONALDSON W/PORT) 26 105-1519 16 BULK HOSE (3/8") LOW PERM 27 106-712 4 FLG SCREW (M6-1.00 X 16MM) 28 105-226 1 WASHER (5/16") 29 107-096 2 LOCKNUT (M8-1.25, NLK) 30 106-163 2 FLG SCREW (M8-1.25 X 30MM) 31 111-119 1 STACK CAP 32 194-038 1 FILTER ELEMENT, PRIMARY 33 194-039 1 FILTER ELEMENT - SECONDARY 34 215-0072 1 FAN HARNESS 35 215-0060 1 BATTERY CABLE (6GA x 36", RED) 36 215-0042 1 BATTERY CABLE (6GA X 33", BLK) 37 105-677 4 FLG BOLT (3/8-NC X 1-1/4") 38 106-083 1 SCREW (M8-1.25 X 20MM) 39 105-091 1 LOCK WASHER (5/16") 40 362-2613 2 CLAMP - SQUEEZE (.569-.650) 41 166-825 1 KEY (1/4" X 1-1/4") 42 150-5195 1 S/O COUPLER (04H-06H) 43 150-4906 1 CONNECTOR (M20S-06SF) 44 154-076 1 CONNECTOR (06J-06S) 45 150-5021 1 DRAIN HOSE (06JM-06JFX90S-16"-400) 46 302-3982 1 BATTERY TRAY 47 302-3983 1 BATTERY HOLD DOWN 48 106-538 4 LOCKNUT (M6-1.00,PRV TRQ,10.9) 49 106-848 4 FLG SCREW (M6-1.00 X 25MM) 50 140-2076 1 BATTERY [230 CCA, WET]

REMARKS

5W30 (1.8QT), USE REPLACEMENT THROTTLE CABLE 500-3269.

SEE FOOTNOTE 1 USE LOCTITE 242 OR EQUIVALENT

BEGINS WITH S/N

NOTE:

195-1582 STARTER (HONDA GX690) THIS PARTS PAGE SUPERSEDES OLD #ID0425468 FOOTNOTES:

1. PUMP MOUNT KIT 160-1298 COMPONENTS: 160-1217 FLANGED COUPLER (1.25"), 160-1218 FLANGED COUPLER (9T-.625") AND 160-1219 SPIDER INSERT GREEN. TORQUE COUPLING BOLT TO 35 FT-LB. USE LOCTITE 242.

05

ID0454397

28

ENGINE ELECTRICAL

C24X ENDS WIT S/N: DWPC24XAHH0000749

33

31 46

34

30 28

32 23

27

35 51

TO FUEL TANK PICK-UP

2

3

49 50

24 25 32

15

4

26

19

44 45

20 22 NA

1

8

5 6

41 7 9 42 39

41

18 17 29

13

12

29

15 14 48

46

28

TO FUEL TANK VENT

16 12

47

5 6

9

10

11

43

36

38 21 37 07

NA

40 ID0425468

29

ENGINE ELECTRICAL

C24X ENDS WIT S/N: DWPC24XAHH0000749 REF PART NO. NUMBER

QTY

DESCRIPTION

1 195-2200 1 HONDA ENGINE (GX690) W/O AIR 2 195-1546 2 SPARK PLUG (HONDA GX690) 3 195-1536 1 FUEL FILTER (HONDA GX690) 4 195-1533 1 OIL FILTER (HONDA GX690) 5 105-047 4 LOCKNUT (3/8-NC) 6 106-390 9 WASHER (M10) 7 302-2531 1 MANUAL COMPARTMENT - VENTED 8 105-797 3 SCREW (M6-1.00 X 20MM, BX) 9 106-237 11 LOCKNUT (M6-1.00,PRV TRQ,NLK) 10 215-1328 1 RECTIFIER ASSY. REGULATOR 11 302-2875 1 BRACKET - BATTERY SUPPORT 12 107-366 4 SCREW (M6-1.00 X 30MM, 8.8) 13 105-162 4 BOLT (3/8-NC X 2-1/4") 14 301-9878 1 CONTROL MOUNT 15 106-379 6 FLG LK SCREW (M6-1.00 X 20MM) 16 106-385 2 FLG LOCKNUT (M6-1.00) 17 195-1581 1 IGNITION KEY (HONDA GX690) RT12 18 215-2282 1 SWITCH ASSEMBLY 19 160-1298 1 PUMP MOUNT KIT - 1.125 20 105-052 2 BOLT (3/8-NC X 1-1/4") 21 302-0734 2 SPACER- BATTERY BOX 22 105-072 2 LOCK WASHER (3/8") 23 195-1530 1 MUFFLER 24 301-9876 1 AIR FILTER MOUNT 25 105-2185 1 P-CLAMP (.625) 26 195-1583 1 FUEL PUMP (HONDA GX690) 27 195-2345 1 AIR FILTER (DONALDSON W/PORT) 28 105-1519 16 BULK HOSE (3/8") LOW PERM 29 106-712 4 FLG SCREW (M6-1.00 X 16MM) 30 105-226 1 WASHER (5/16") 31 107-096 2 LOCKNUT (M8-1.25, NLK) 32 106-163 2 FLG SCREW (M8-1.25 X 30MM) 33 111-119 1 STACK CAP 34 194-038 1 FILTER ELEMENT, PRIMARY 35 194-039 1 FILTER ELEMENT - SECONDARY 36 215-0072 1 FAN HARNESS 37 215-0060 1 BATTERY CABLE (6GA x 36", RED) 38 215-0042 1 BATTERY CABLE (6GA X 33", BLK) 39 362-1869 1 PLASTIC BATTERY BOX 40 215-256 1 BATTERY (12V, 200 AMP) 41 106-595 2 SCREW (M6-1.00 X 60MM) 42 107-801 2 WASHER (M6) 43 105-677 4 FLG BOLT (3/8-NC X 1-1/4") 44 106-083 1 SCREW (M8-1.25 X 20MM) 45 105-091 1 LOCK WASHER (5/16") 46 362-2613 2 CLAMP - SQUEEZE (.569-.650) 47 166-825 1 KEY (1/4" X 1-1/4") 48 150-5195 1 S/O COUPLER (04H-06H) 49 150-4906 1 CONNECTOR (M20S-06SF) 50 154-076 1 CONNECTOR (06J-06S) 51 150-5021 1 DRAIN HOSE (06JM-06JFX90S-16"-400)

REMARKS

5W30 (1.8QT), USE REPLACEMENT THROTTLE CABLE 500-3269.

SEE FOOTNOTE 1 USE LOCTITE 242 OR EQUIVALENT

OBSOLETE. USE 140-2076 BATTERY [230 CCA, WET]

NOTE:

195-1582 STARTER (HONDA GX690) THIS PARTS PAGE SUPERSEDES OLD #ID0401500 FOOTNOTES:

1. PUMP MOUNT KIT 160-1298 COMPONENTS: 160-1217 FLANGED COUPLER (1.25"), 160-1218 FLANGED COUPLER (9T-.625") AND 160-1219 SPIDER INSERT GREEN. TORQUE COUPLING BOLT TO 35 FT-LB. USE LOCTITE 242.

07

ID0425468

30

ENGINE ELECTRICAL

C30X/VP30 BEGINS WITH S/N: DWPC30XALH0000254 / DWPVP30XLH0000008

7 6

20

10

9

11

1

12

5 2 13

16 17 34 35 36

38

18

14 19 29

4

9

23

8

3

9 8

26

24

39

SEE FOOTNOTE 2

20

30

21

27

9 22

15

25

32

40 31

28

33 37

04

ID0454414

31

ENGINE ELECTRICAL

C30X/VP30 BEGINS WITH S/N: DWPC30XALH0000254 / DWPVP30XLH0000008 REF PART NO. NUMBER

QTY

1 195-2172 2 500-2093 3 195-2477 4 195-1482 5 500-2812 6 194-039 7 194-038 8 106-570 9 105-226 10 106-329 11 105-091 12 160-1298 13 105-677 14 166-825 15 500-2088 16 115-241 17 150-4589 18 150-4588 19 362-2615 20 106-561 21 107-859 22 215-1863 23 105-797 24 302-2531 25 215-2268 26 106-237 27 215-0042 28 215-0060 29 362-1857 30 106-385 31 106-712 32 105-1876 33 302-3982 34 195-2476 35 195-2475 36 195-2478 37 106-538 38 106-848 39 302-3983 40 140-2076

1 ENGINE - VANGUARD 31HP 1 OIL FILTER 0 LOCK WASHER 1 KEY SWITCH 1 THROTTLE CABLE 1 FILTER ELEMENT - SECONDARY 1 FILTER ELEMENT, PRIMARY 2 SCREW (M8-1.25 X 60MM) 5 WASHER (5/16") 2 SCREW (M8-1.25 X 50MM) 2 LOCK WASHER (5/16") 1 PUMP MOUNT KIT - 1.125 4 FLG BOLT (3/8-NC X 1-1/4") 1 KEY (1/4" X 1-1/4") 1 FUEL FILTER 1 CAP (04NF) 1 NIPPLE (04N-2" 304SS) 1 CONNECTOR (M14-1.50-04NF) 1 CLAMP - SQUEEZE (.404-.452) 2 LOCKNUT (M8-1.25,PRV TRQ,10.9) 2 NUT, LOCK, #6-32, NYLON INSERT 1 TACHOMETER/HOURMETER 3 SCREW (M6-1.00 X 20MM, BX) 1 MANUAL COMPARTMENT - VENTED 1 FAN HARNESS 3 LOCKNUT (M6-1.00,PRV TRQ,NLK) 1 BATTERY CABLE (6GA X 33", BLK) 1 BATTERY CABLE (6GA x 36", RED) 1 S/O COUPLER (03H-04H) 2 FLG LOCKNUT (M6-1.00) 2 FLG SCREW (M6-1.00 X 16MM) 2 SCREW (#6-32 X 5/8", SOC ZP) 1 BATTERY TRAY 0 NUT - SWITCH 0 COVER - SWITCH 0 KEY 4 LOCKNUT (M6-1.00,PRV TRQ,10.9) 4 FLG SCREW (M6-1.00 X 25MM) 1 BATTERY HOLD DOWN 1 BATTERY [230 CCA, WET]

NOT SHOWN:

195-2609 195-2631 195-2644

DESCRIPTION

REMARKS

5W30 2.4QT (79 OZ.)

FOOTNOTE 1

USE PIPE THREAD SEALANT

STARTER STATOR REGULATOR

FOOTNOTES:

1. PUMP MOUNT KIT 160-1298 COMPONENTS. 160-1217 FLANGED COUPLER (1.125"), 160-1218 FLANGED COUPLER (9T-.625") AND 160-1219 SPIDER INSERT GREEN. TORQUE COUPLING BOLT TO 35 FT-LB. USE LOCTITE 242 2. TO FUEL TANK VENT. REFER TO FUEL TANK PARTS PAGE - ID0425530 FOR LOCATION. NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0425524.

04

ID0454414

32

ENGINE ELECTRICAL

C30X/VP30 ENDS WITH S/N: DWPC30XAAH0000253 / DWPVP30XAH0000007

7

12

8 9 10 11

6

1

13 14

5

3 44

45

2 4

46 16 19

17

39

18

SEE FOOTNOTE 2

22

35 34

23

21

25

42 31 30 27

29

15 20

37 24

40

26

41 27 28

36 32

11

33 43

38 29

07

ID0425524

33

ENGINE ELECTRICAL

C30X/VP30 ENDS WITH S/N: DWPC30XAAH0000253 / DWPVP30XAH0000007 REF PART NO. NUMBER

QTY

1 195-2172 2 500-2093 3 195-2477 4 195-1482 5 500-2812 6 194-039 7 194-038 8 106-570 9 105-226 10 106-329 11 105-091 12 160-1298 13 105-677 14 166-825 15 500-2088 16 115-241 17 150-4589 18 150-4588 19 362-2615 20 106-330 21 106-561 22 107-859 23 215-1863 24 105-797 25 302-2531 26 215-2268 27 106-389 28 106-078 29 106-237 30 215-0042 31 107-096 32 215-0060 33 215-256 34 106-595 35 362-1869 36 107-366 37 107-801 38 302-0734 39 362-1857 40 106-385 41 106-712 42 105-1876 43 302-2875 44 195-2476 45 195-2475 46 195-2478

1 ENGINE - VANGUARD 31HP 1 OIL FILTER 1 LOCK WASHER 1 KEY SWITCH 1 THROTTLE CABLE 1 FILTER ELEMENT - SECONDARY 1 FILTER ELEMENT, PRIMARY 1 SCREW (M8-1.25 X 60MM) 3 WASHER (5/16") 2 SCREW (M8-1.25 X 50MM) 3 LOCK WASHER (5/16") 1 PUMP MOUNT KIT - 1.125 4 FLG BOLT (3/8-NC X 1-1/4") 1 KEY (1/4" X 1-1/4") 1 FUEL FILTER 1 CAP (04NF) 1 NIPPLE (04N-2" 304SS) 1 CONNECTOR (M14-1.50-04NF) 1 CLAMP - SQUEEZE (.404-.452) 1 SCREW (M8-1.25 X 70MM) 1 LOCKNUT (M8-1.25,PRV TRQ,10.9) 2 NUT, LOCK, #6-32, NYLON INSERT 1 TACHOMETER/HOURMETER 3 SCREW (M6-1.00 X 20MM, BX) 1 MANUAL COMPARTMENT - VENTED 1 FAN HARNESS 2 WASHER (M8) 1 NUT (M8-1.25) 7 LOCKNUT (M6-1.00,PRV TRQ,NLK) 1 BATTERY CABLE (6GA X 33", BLK) 1 LOCKNUT (M8-1.25, NLK) 1 BATTERY CABLE (6GA x 36", RED) 1 BATTERY (12V, 200 AMP) 2 SCREW (M6-1.00 X 60MM) 1 PLASTIC BATTERY BOX 2 SCREW (M6-1.00 X 30MM, 8.8) 2 WASHER (M6) 2 SPACER- BATTERY BOX 1 S/O COUPLER (03H-04H) 2 FLG LOCKNUT (M6-1.00) 2 FLG SCREW (M6-1.00 X 16MM) 2 SCREW (#6-32 X 5/8", SOC ZP) 1 BRACKET - BATTERY SUPPORT 1 NUT - SWITCH 1 COVER - SWITCH 1 KEY

NOT SHOWN:

195-2609 195-2631 195-2644

DESCRIPTION

REMARKS

5W30 2.4QT (79 OZ.)

FOOTNOTE 1

USE PIPE THREAD SEALANT

OBSOLETE. USE 140-2076 BATTERY [230 CCA, WET]

STARTER STATOR REGULATOR

FOOTNOTES:

1. PUMP MOUNT KIT 160-1298 COMPONENTS. 160-1217 FLANGED COUPLER (1.125"), 160-1218 FLANGED COUPLER (9T-.625") AND 160-1219 SPIDER INSERT GREEN. TORQUE COUPLING BOLT TO 35 FT-LB. USE LOCTITE 242 2. TO FUEL TANK VENT. REFER TO FUEL TANK PARTS PAGE - ID0425530 FOR LOCATION. NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0399785.

07

ID0425524

34

FUEL TANK

17

C24X ENDS WITH S/N: XXXXX C30X ENDS WITH S/N: XXXXX

16

21

11

10

15 24 24 20

22 15

9

15 2 13 15

1

11

3

10 8 12

15

23 18

19 7 14

4

6 03

10

5 ID0401441

35

FUEL TANK

C24X ENDS WITH S/N: XXXXX C30X ENDS WITH S/N: XXXXX REF PART NO. NUMBER

QTY

DESCRIPTION

1 105-1517 24 BULK HOSE (1/4") LOW PERM 2 150-4500 1 S/O COUPLER (04N-04H90) 3 118-096 12 BULK FUEL TUBING (1/4",PER FT) 4 301-9183 1 TANK - FUEL 5 105-2011 1 FUEL GAUGE GROMMET 6 115-165 1 PLUG (08N, SOC) 7 195-2250 1 FUEL GAUGE 8 302-0353 1 FILL NECK 9 362-1479 1 FUEL CAP (RATCHET 2.25") 10 105-1795 6 FLG LK SCREW (M8-1.25 X 20mm) SERRATED 11 106-386 3 FLG LOCKNUT (M8-1.25) 12 302-0355 1 PLATE - FUEL FILL 13 150-4758 1 S/O COUPLER (02N-03H) 14 105-712 1 SET SCREW (1/4-NC X 1/4", CUP) 15 105-1516 29 BULK HOSE (3/16") LOW PERM 16 362-2088 1 GROMMET (.875) 17 362-1530 1 SLOSH VALVE 18 157-022 1 O-RING (224 D90) 19 150-4496 1 S/O ELBOW (02N-02H) 20 150-4830 1 TEE 03H - 03H - 03H 21 302-0599 1 MOUNT - ROLL OVER VALVE 22 362-2618 1 GROMMET (3/8") 23 150-4499 1 FUEL PICK-UP 24 110-249 7 WORM CLAMP (1/4" TO 5/8")

REMARKS

USED ON C30X ONLY. SEE FOOTNOTE 1 USED ON C30X ONLY. SEE FOOTNOTE 2

USE PIPE THREAD SEALANT

(6" FILLNECK TO TEE; 2" TEE TO SLOSH VALVE; 21" TEE TO TANK)

NOT SHOWN:

FOOTNOTES:

1. USE 105-1518 BULK HOSE (5/16") LOW PERM ON C24X. 22.00" LENGTH 2. USE 150-4497 S/O COUPLER (04N-05H90) ON C24X.

NOTE:

03

ID0401441

36

FUEL TANK

C24X BEGINS WITH S/N: DWPC24XAVH0000391 C30X BEGINS WITH S/N: DWPC30XAPH0000150

9

2 20 TO FUEL FILTER

1

17 3

11 10

1

13 12

TO ENGINE VENT

20

19

18

15

8

21

7 14 16 4

6 09

10

5 ID0425530

37

FUEL TANK

C24X BEGINS WITH S/N: DWPC24XAVH0000391 C30X BEGINS WITH S/N: DWPC30XAPH0000150 REF PART NO. NUMBER

QTY

DESCRIPTION

1 105-1517 45 BULK HOSE (1/4") LOW PERM 2 150-4500 1 S/O COUPLER (04N-04H90) 3 118-096 12 BULK FUEL TUBING (1/4",PER FT) 4 301-9183 1 TANK - FUEL 5 105-2011 1 FUEL GAUGE GROMMET 6 115-165 1 PLUG (08N, SOC) 7 195-2250 1 FUEL GAUGE 8 302-0353 1 FILL NECK 9 362-1479 1 FUEL CAP (RATCHET 2.25") 10 105-1795 5 FLG LK SCREW (M8-1.25 X 20mm) SERRATED 11 106-386 2 FLG LOCKNUT (M8-1.25) 12 302-0355 1 PLATE - FUEL FILL 13 150-5172 1 FITTING - ANTI-SIPHON (04N-04H) 14 105-712 1 SET SCREW (1/4-NC X 1/4", CUP) 15 150-5186 1 S/O COUPLER (02N-04NF90) 16 270-4973 1 EMISSIONS CONTROL METAL TANK PLATE 17 115-157 1 PLUG (02N, SOC) 18 157-022 1 O-RING (224 D90) 19 150-4499 1 FUEL PICK-UP 20 110-249 3 WORM CLAMP (1/4" TO 5/8") 21 110-628 1 SNAP-ON CLAMP (.468" TO .531")

REMARKS

SEE FOOTNOTE 1

USE PIPE THREAD SEALANT

USE PIPE THREAD SEALANT USE LOCTITE 242 USE PIPE THREAD SEALANT USE PIPE THREAD SEALANT

NOT SHOWN:

FOOTNOTES:

1. C24X / C30X / VP30 VENT HOSE 105-1517 31" C24X FUEL SUPPLY HOSE 105-1517 23.5" C30X / VP30 FUEL SUPPLY HOSE 105-1517 14"

NOTE:

09

ID0425530

38

NOTES:

ID0134963

39

POWERTRAIN

40

LEFT TRACK ASSEMBLY C12X/C16X/ C24X/ C30X

24 1

21 23 4 3 2 5

6

14 13

11

7 8

15 9 11 10 22

16 21 12

15

25 20 19

18 17

05

ID0425532

41

LEFT TRACK ASSEMBLY C12X/C16X/ C24X/ C30X REF PART NO. NUMBER

QTY

1 362-2012 2 301-2112 3 302-2399 4 107-048 5 105-1879 6 301-9162 7 106-632 8 106-706 9 106-983 10 106-392 11 106-775 12 107-748 13 301-9503 14 106-355 15 170-1057 16 301-9504 17 105-1301 18 300-7979 19 105-825 20 105-1303 21 106-743 22 107-307 23 105-1937 24 150-4284 25 301-6726

1 RUBBER TRACK (200 X 25 X 72 SWA) 2 TRACK SPROCKET 1 HUB- MACHINED ZP 5 LUG BOLT (7/16-NF X 1-3/4") 5 FLG LOCKNUT (7/16-NF, HARDENED) 1 SHORT TRACK FRAME - LEFT 1 FLG LK SCR (M12-1.75X35MM,SER) 4 FLANGE LOCKNUT (M12-1.75) 1 SCREW (M16-2.00 X 150MM, 10.9 FULL) 1 WASHER (M16) 2 JAM NUT (M16-2.00, CL 04) 2 SCREW (M12-1.75 X 50MM, 10.9) 1 FLANGED BUSHING 1 FLG NUT (M16-2.00, 10.9) 4 TRACK ROLLER 7" 1 AXLE, TRACK ROLLER 4 INTERNAL SNAP RING (2.188) 4 WHEEL CAP 4 FLG LK BOLT (3/8-NC X 3/4) 4 WASHER (.406 X 1.312 X .120) 6 WASHER (.531", HARDENED) 2 FLG SCREW (M12-1.75 X 45MM CL 10.9) 4 BOLT (1/2-NC X 2-1/2", GR 8) 1 HYDRAULIC MOTOR (48.0 CID) 1 TRACK SHOE

DESCRIPTION

REMARKS

(HYD MOTOR NUT) TORQUE TO 300 LB-FT TORQUE TO 95 LB-FT

ANTISIEZE APPLIED TO END OF BOLT

ANTI-SIEZE THREADS ONLY USE LOCTITE 242

USE LOCTITE 242. TORQUE 100 LB-FT

NOT SHOWN:

FOOTNOTES:

NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0396672

05

ID0425532

42

RIGHT TRACK ASSEMBLY C12X / C16X / C24X / C30X

31 29 30 28 25

1

27

26

17 9

18

6 7

24 23 22 21 20 19 16

4 5

10 9

3 15 2 8

15 14 13 11

12

3 6 5

4

7

05

ID0425563

43

RIGHT TRACK ASSEMBLY C12X / C16X / C24X / C30X REF PART NO. NUMBER

QTY

1 362-2013 2 301-9165 3 170-1057 4 105-1303 5 105-825 6 300-7979 7 105-1301 8 107-307 9 106-706 10 106-632 11 106-983 12 106-392 13 301-9503 14 106-355 15 106-775 16 301-9504 17 302-0358 18 302-0347 19 105-2063 20 105-2068 21 105-797 22 105-2145 23 106-538 24 107-744 25 301-2112 26 105-1879 27 302-2399 28 107-048 29 106-743 30 105-1937 31 150-4284

1 RUBBER TRACK (200 X 36 X 72 SWA) 1 LONG TRACK FRAME - RIGHT 6 TRACK ROLLER 7" 6 WASHER (.406 X 1.312 X .120) 6 FLG LK BOLT (3/8-NC X 3/4) 6 WHEEL CAP 6 INTERNAL SNAP RING (2.188) 9 FLG SCREW (M12-1.75 X 45MM CL 10.9) 11 FLANGE LOCKNUT (M12-1.75) 1 FLG LK SCR (M12-1.75X35MM,SER) 1 SCREW (M16-2.00 X 150MM, 10.9 FULL) 1 WASHER (M16) 1 FLANGED BUSHING 1 FLG NUT (M16-2.00, 10.9) 2 JAM NUT (M16-2.00, CL 04) 1 AXLE, TRACK ROLLER 1 PLATE - BRAKE 1 BRAKE PLATE 1 PIN & HANDLE (1.0 DIA X 1.87) 2 FLG SCREW (M12-1.75 X 60MM) 1 SCREW (M6-1.00 X 20MM, BX) 1 LANYARD LOOP/EYE 1 LOCKNUT (M6-1.00,PRV TRQ, CL 10) 1 WASHER (M6, BLK) 2 TRACK SPROCKET 5 FLG LOCKNUT (7/16-NF, HARDENED) 1 HUB- MACHINED ZP 5 LUG BOLT (7/16-NF X 1-3/4") 4 WASHER (.531", HARDENED) 4 BOLT (1/2-NC X 2-1/2", GR 8) 1 HYDRAULIC MOTOR (48.0 CID)

DESCRIPTION

REMARKS

95 FT LBS (HYD MOTOR NUT) TORQUE TO 300 LB FT USE LOCTITE 242. TORQUE TO 100 FT-LBS

NOT SHOWN:

FOOTNOTES:

NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0396703

05

ID0425563

44

CAST ROLLER KIT

9

11

12

10 7

5

B 3

8

2

1

A

SECTION VIEW 4 7 4 10 11

12 5

3

6 2

9

8

1

DETAIL A DETAIL B APPLY LOCTITE 638 OR EQUIVALENT TO INNER SEAL RING SURFACE AND SEALSURFACE ON SHAFT. 02 ALLOW TIME TO SET UP BEFORE INSTALLATION OF ROLLER ASM.

ID0746554

45

CAST ROLLER KIT REF PART NO. NUMBER

QTY

1 105-1303 2 105-825 3 300-7979 4 303-4321 5 105-1301 6 157-154 7 303-4320 8 300-10568 9 105-1749 10 118-459 11 125-10009 12 125-10008

1 1 1 1 1 1 1 1 1 1 1 1

REMARKS

DESCRIPTION

WASHER (.406 X 1.312 X .120) FLG LK BOLT (3/8-NC X 3/4) WHEEL CAP SHIM INTERNAL SNAP RING (2.188) O-RING (032 D70) SEAL RING 7" CST IRN ROLLER IMP SEAL OIL SEAL (1.500 X 2.328 X .631) W SHIELD INTERNAL SNAP RING BEARING 6006-2RS1 BEARING 6205-2RS1

SEE FOOTNOTE 2 BEARINGS SHOULD BE INSTALLED

NOT SHOWN: PART NUMBER

QTY

DESCRIPTION

REMARKS

190-10104 AR 1X CAST ROLLER KIT CONTAINS COMPONENTS #1-12 FOR 1X CAST ROLLER - SINGLE CAST ROLLER ASM 190-10105 AR 4X CAST ROLLER KIT CONTAINS COMPONENTS #1-12 FOR 4X CAST ROLLERS - FOR ZAHN, AND C SERIES SHORT TRACK ASM'S 190-10106 AR 6X CAST ROLLER KIT CONTAINS COMPONENTS #1-12 FOR 6X CAST ROLLERS - FOR VP30 AND C SERIES LONG TRACK ASM'S

FOOTNOTES:

1. QTY'S ARE PER ROLLER ASSEMBLY. 2. USE lOCTITE 638 OR EQUIVALENT. CLEAN EXTERNAL SEAL SURFACE. ALLOW LOCTITE TO SET UP PROPERLY BEFORE ROLLER INSTALLATION.

NOTE:

THE CAST ROLLERS KIT IS AN UPGRADE TO 170-1057 ROLLERS. THE CAST ROLLER IS CONFIGURED WITH AND IMPROVED SEAL. THE SEAL RING IS NEEDED TO MODIFY THE SHAFT FOR PROPER FITMENT. AFTER THE SEAL RING HAS BEEN INSTALLED THE SHAFT IS NO LONGER SUFFICIENT FOR USE WITH THE 170-1057 POLYMER ROLLER ASSEMBLY. CAST ROLLERS AND POLYMER ROLLERS ARE NOT INTERCHANGEABLE.

02

ID0746554

46

NOTES:

ID0134963

47

FRAME COMPONENTS

48

FRAME C12X/ C16X / C24X / C30X / VP30 BEGINS WITH S/N: .....

9 8 23

17

9

14 15

7 6

16

9 4

5

21

22

11 25

24

19 18

13

20

9

26

12

11 3

1 2

07

ID0452655

49

FRAME C12X/ C16X / C24X / C30X / VP30 BEGINS WITH S/N: .....

REF PART NO. NUMBER

QTY

DESCRIPTION

1 301-9231 1 FRAME - PEDESTRIAN 2 159-392 1 PLUG (12S, SOC) 3 150-5164 1 SIGHT GLASS W/ BALL 4 150-2337 1 BREATHER -12SAE 5 150-2925 1 TANK STRAINER (100MESH -16HB) 6 301-9202 1 PLATE - ENGINE MOUNT 7 106-993 4 FLG LK SCREW (M10-1.50 X 35MM CL8.8 NLK) 8 302-5531 1 CONTROL TOWER COVER - CX SERIES 9 105-799 12 FLG SCREW (M10-1.50 X 25MM) 10* 125-754 1 COMPOSITION BUSHING (2") 11 107-003 8 FLG LK SCREW (M12-1.75 X 35MM) 12 302-0257 1 CONTROL TOWER - OFFSET 13 302-4526 1 BATTERY SLIDE 14 106-079 1 SCREW (M10-1.50 X 30MM) 15 106-090 1 LOCK WASHER (M10, SPLIT) 16 105-1303 1 WASHER (.406 X 1.312 X .120) 17 301-6751 1 REAR COVER 18 106-522 2 THRUST WASHER 19 115-542 1 SNAP RING 20 106-706 3 FLG LK NUT (M12-1.75, CL 10, PRV TQ) 21 150-2028 1 S/O COUPLER (12S-12H) 22 105-1896 2 FLG SCREW (M12-1.75 X 35MM) 23 107-287 4 CLIP NUT (M10-1.50) 24 106-709 1 FLG LK NUT (M12-1.75) 25 300-11401 1 HANDLE 26 177-309 1 COMPOSITION BUSHING (2")

REMARKS

SUNBELT P/N: 333-1005; VP30 FRAME P/N: 302-0334

SUNBELT P/N: 333-1007 SUNBELT P/N: 333-1084 SEE FOOTNOTE 1

SUNBELT P/N: 333-1002; SEE FOOTNOTE 1 SUNBELT P/N: 333-1089. NOT USED ON C12X NOT USED ON C12X NOT USED ON C12X NOT USED ON C12X SUNBELT P/N: 333-1001

NOT USED ON C12X NOT USED ON C12X SEE FOOTNOTE 1; SUNBELT P/N: 333-10001

NOT SHOWN:

FOOTNOTES:

1. 2X 105-799 FLG SCREW (M10-1.50 X 25MM) & 300-11401 HANDLE (SUNBELT P/N: 333-10001) BEGIN WITH S/N'S: DWPC12XXXXXXXXXXX DWPC16XXXXXXXXXXX, DWPC24XXXXXXXXXXX, DWPC30XXXXXXXXXXX, DWPVP30XXXXXXXXXX. IF REPLACING 302-0257 CONTROL TOWER (SUNBELT P/N: 333-1002) ALSO ORDER 2X 105-799 AND 300-11401 (333-10001).

NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0425549

07

ID0452655

50

FRAME C16X/ C24X/ C30X/ VP30 ENDS WITH S/N:......

9 8

7

5

21

9

9

6 14 26

4

17

15

23 24 10

20

16 25

13

18 19

12 11 3 1 2

06

ID0425549

51

FRAME C16X/ C24X/ C30X/ VP30 ENDS WITH S/N:......

REF PART NO. NUMBER

QTY

DESCRIPTION

1 301-9231 1 FRAME - PEDESTRIAN 2 159-392 1 PLUG (12S, SOC) 3 121-040 1 SIGHT GLASS 4 150-2337 1 BREATHER -12SAE 5 150-2925 1 TANK STRAINER (100MESH -16HB) 6 301-9202 1 PLATE - ENGINE MOUNT 7 106-993 4 FLG LK SCREW (M10-1.50 X 35MM) 8 302-5531 1 CONTROL TOWER COVER - CX SERIES 9 105-799 12 FLG LK SCREW (M10-1.50 X 25MM) 10 125-754 2 COMPOSITION BUSHING (2") 11 107-003 8 FLG LK SCREW (M12-1.75 X 35MM) 12 302-0257 1 CONTROL TOWER - OFFSET 13 301-9194 1 BATTERY SLIDE 14 106-079 1 SCREW (M10-1.50 X 30MM) 15 106-090 1 LOCK WASHER (M10) 16 105-1303 1 WASHER (.406 X 1.312 X .120) 17 106-397 2 WASHER (M12, HARDENED) 18 105-117 2 WASHER (5/16") 19 105-047 2 LOCKNUT (3/8-NC) 20 105-1902 2 SHLD BLT (1/2" X 3/4", 3/8-NC, ZP) 21 301-6751 1 REAR COVER 23 106-522 2 THRUST WASHER 24 115-542 1 SNAP RING 25 106-706 2 FLANGE LOCKNUT (M12-1.75) 26 150-2028 1 S/O COUPLER (12S-12H)

REMARKS

SUNBELT P/N: 333-1005; VP30 FRAME P/N: 302-0334 USE SIGHT PLUG 150-5164 INSTEAD OF 121-040 SUNBELT P/N: 333-1007 SUNBELT P/N: 333-1084

SUNBELT P/N: 333-1002. SEE FOOTNOTE 1 SUNBELT P/N: 333-1006

SUNBELT P/N: 333-1001

NOT SHOWN:

FOOTNOTES:

1. IF REPLACING 302-0257 CONTROL TOWER (SUNBELT P/N: 333-1002) ALSO ORDER 2X 105-799 AND 300-11401 HANDLE (SUNBELT P/N: 333-10001).

NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0397617

06

ID0425549

52

COOLER TOWER

C16X/ C24X/ C30X/ VP30

3 2 16 4

1

4 13

6 5

12

13

14 10

8 6

15

9

7

10 TO FRAME TANK

TO FILTER

11 04

ID0425537

53

COOLER TOWER

C16X/ C24X/ C30X/ VP30 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

QTY

DESCRIPTION

REMARKS

302-0496 1 COOLER TOWER 107-629 4 WASHER (M8) 106-767 4 SCREW (M8-1.25 X 20mm,BUT SOC) 106-551 6 CLIP NUT (M8-1.25) 106-083 4 SCREW (M8-1.25 X 20MM) 105-091 4 LOCK WASHER (5/16") 106-078 2 NUT (M8-1.25) 150-4838 1 OIL COOLER - PUSHER FAN 150-2028 1 S/O COUPLER (12S-12H) 110-353 2 WORM CLAMP (3/4" TO 1-1/2") 117-378 40 BULK HOSE, L P (-12)(PER IN) 106-387 6 FLG LOCKNUT (M10-1.50) 105-2377 6 FLG LK SCREW (M10-1.50 X 35MM) 155-196 1 S/O COUPLER (12S-12H45) 117-378 14 BULK HOSE, L P (-12)(PER IN) 302-6574 1 GRILLE

NOT SHOWN:

FOOTNOTES:

NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0399438

04

ID0425537

54

PIVOT ASSEMBLY C12X / C16X / C24X / C30X

4 2 7

5

27

1

6 5

25 22 23

8

21

16

14 15

24 25

9 10 22 3

11

12

26

17

19

18 19

06

20

ID0425866

55

PIVOT ASSEMBLY C12X / C16X / C24X / C30X REF PART NO. NUMBER

QTY

1 302-4650 2 105-1770 3 105-1937 4 105-065 5 106-522 6 125-754 7 115-542 8 301-6176 9 300-9124 10 105-059 11 105-073 12 107-035 14 303-4338 15 106-995 16 106-387 17 105-814 18 125-1128 19 110-396 20 105-249 21 105-136 22 106-743 23 301-7049 24 302-2631 25 106-198 26 302-2651 27 177-309

1 PIVOT (TRACK) 2 U-BOLT 2 INCH SQUARE 4 BOLT (1/2-NC X 2-1/2", GR 8) 4 LOCKNUT (1/2-NC, GR B, PRV TQ) 2 THRUST WASHER 1 COMPOSITION BUSHING (2") 1 SNAP RING 1 DRIVE HUB 6 BUSHING 3 WASHER (7/16") 6 LOCK WASHER (7/16") 6 BOLT (7/16-NC X 3", GD8) 1 AUGER SUPPORT 3 FLG LK SCREW (M10-1.50 X 45MM, NLK) 3 FLG LOCKNUT (M10-1.50) 3 FLG LOCKNUT (3/8-NC, GR F) 1 BALL BEARING - MAINT. FREE (1.25) 2 FLANGETTE (3-BOLT, L/ZERK) 3 CARRIAGE BOLT(3/8-NC X 1-1/4") 5 BOLT (1/2-NC X 3-1/2", GD8) 9 WASHER (.531", HARDENED) 1 PIVOT SHIM 2 CLAMP PLATE 9 FLG LOCKNUT (1/2-NC, GR G) 1 SPOILS AUGER - CX 1 COMPOSITION BUSHING (2")

DESCRIPTION

REMARKS

USE LOCTITE 271, TORQUE TO 75 LB FT. SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. REF# 14, 303-4338 AUGER SUPPORT SUPERSEDES PREVIOUS 302-0359 AUGER SUPPORT. BEGINS WITH S/N DWPC12XAPN0000372 DWPC16XAVN0003219, DWPC24XACN0003150, DWPC30XACN0000965

NOTE:

06

ID0425866

56

SPROCKET OPTION C12 / C14 / C16 C12X / C16X / C24X / C30X

1

5

2 4 3

04

ID0425884

57

SPROCKET OPTION C12 / C14 / C16 C12X / C16X / C24X / C30X REF PART NO. NUMBER

QTY

1 375-1164 2 302-0907 3 302-0691 4 140-1347 5 301-7048

1 1 1 1 1

DESCRIPTION

SPROCKET 11 TOOTH 35K SPACER DRIVE HUB- 19K AUGER BUSHING SPACER - 19K HEAD SPROCKET (11T, 2P) AUGER BUSHING SPACER

REMARKS

NOTE DIRECTIONAL ARROW ON SPROCKET HYD MOTOR NUT - TORQUE TO 375 FT-LBS. NOT AVAILABLE FOR C12X. NOT AVAILABLE FOR C12X. NOT AVAILABLE FOR C12X.

NOT SHOWN:

FOOTNOTES:

NOTE:

1. REFERENCE NUMBERS (1 AND 5 ) ARE PART OF OPTION 35K 2. REFERENCE NUMBERS (2,3 AND 4) ARE PART OF OPTION 19K. 19K OPTION NOT AVAILABLE FOR C12X. 3. THIS PARTS PAGE SUPERSEDES OLD #ID0401924

04

ID0425884

58

NOTES:

ID0134963

59

CONTROL COMPONENTS

60

CONTROL TOWER C12X / C16X / C24X / C30X / VP30 BEGINS WITH S/N: SEE FOOTNOTE 1

23 20 22

4

16

15

14 13

18 18 17

6 5

11

12

19 18 21

7

2

9 8

10

8

3

1

02

ID0488643

61

CONTROL TOWER C12X / C16X / C24X / C30X / VP30 BEGINS WITH S/N: SEE FOOTNOTE 1 REF PART NO. NUMBER

QTY

1 302-0257 2 107-095 3 105-2477 4 105-091 5 106-386 6 105-2020 7 105-892 8 154-220 9 106-078 10 302-0287 11 116-941 12 107-353 13 302-6053 14 302-6052 15 105-117 16 302-6695 17 106-561 18 106-395 19 108-192 20 107-872 21 106-389 22 106-991 23 107-519

1 CONTROL TOWER - OFFSET 4 FLG LK SCREW (M8-1.25 X 16MM) 2 FLG LK BLT (1/4-NC X 5/8", SER, GD5) 2 LOCK WASHER (5/16") 3 FLG LOCKNUT (M8-1.25) 1 SPRING - TORSION 2 SCREW (M8-1.25 X 30MM, SOC) 2 CONNECTOR (04O-06S) 1 NUT (M8-1.25, CL 8) 1 HANDLE 1 HANDLE (3/8-NC, GREEN) 1 SET SCREW (M8-1.25 X 10MM) 1 LEVER - LEFT 1 LEVER - RIGHT 2 WASHER (5/16") 1 ATTACHMENT CONTROL LEVER 1 LOCKNUT (M8-1.25,PRV TRQ, CL10) 6 WASHER (M8, HARDENED) 1 STUD BOLT (M8-1.25 X 20MM) 3 SCREW (M8-1.25 X 65MM, CL 8.8) 2 WASHER (M8) 1 FLG LK SCREW (M8-1.25 X 20MM, CL8.8 NLK) 2 SCREW (M8-1.25 X 12MM)

DESCRIPTION

REMARKS

SEE FOOTNOTE 2

USE LOCTITE 242 USE LOCTITE 271 ON VALVE END USE LOCTITE 271 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 HAND TIGHTEN - ITEM 23 TO ROTATE FREELY USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

1. DWPC12XAKJ0000092, DWPC16XATJ0001392, DWPC24XACJ0001103, DWPC30XAVJ0000385, DWPVP30XEJ0000177 2. IF REPLACING 302-0257 CONTROL TOWER (SUNBELT P/N: 333-1002) ALSO ORDER 2X 105-799 AND 300-11401 HANDLE (SUNBELT P/N: 333-10001).

NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0396589

02

ID0488643

62

CONTROL TOWER C12X/ C16X/ C24X/ C30X/ VP30 ENDS WITH S/N: SEE FOOTNOTE 1

18

22 24

4 17

20

16 15

14

13

5

11 20

6

21

12

19

20 23 9

7

10

2 4

8

8

3

1

06

ID0425891

63

CONTROL TOWER C12X/ C16X/ C24X/ C30X/ VP30 ENDS WITH S/N: SEE FOOTNOTE 1 REF PART NO. NUMBER

QTY

1 302-0257 2 106-232 3 105-2477 4 105-091 5 106-386 6 105-2020 7 105-892 8 154-220 9 106-078 10 302-0287 11 116-941 12 107-353 13 302-0587 14 105-1877 15 302-0589 16 107-519 17 105-117 18 301-9219 19 106-561 20 106-395 21 108-192 22 107-872 23 106-389 24 106-991

1 CONTROL TOWER - OFFSET 4 SCREW (M8-1.25 X 16MM) 2 FLG LK BLT (1/4-NC X 5/8", SER, GD5) 6 LOCK WASHER (5/16") 3 FLG LOCKNUT (M8-1.25) 1 SPRING - TORSION 2 SCREW (M8-1.25 X 30MM, SOC) 2 CONNECTOR (04O-06S) 1 NUT (M8-1.25) 1 HANDLE 1 HANDLE (3/8-NC, GREEN) 1 SET SCREW (M8-1.25 X 10MM) 1 HANDLE - LH 5 ROUND DOMED TUBE GLIDE 1 HANDLE - RH 2 SCREW (M8-1.25 X 12MM) 2 WASHER (5/16") 1 ATTACHMENT CONTROL HANDLE - TUBE 1 LOCKNUT (M8-1.25,PRV TRQ,10.9) 6 WASHER (M8) 1 DOUBLE END STUD M8 - 1.25 3 SCREW (M8-1.25 X 65MM) 2 WASHER (M8) 1 FLG LK SCREW (M8-1.25 X 20MM)

DESCRIPTION

REMARKS

SEE FOOTNOTE 2

USE LOCTITE 242 USE LOCTITE 271 ON VALVE END USE LOCTITE 271 SUPERSEDED BY 302-6053; SEE FOOTNOTE 1 ENDS WITH S/N, SEE FOOTNOTE 1 SUPERSEDED BY 302-6052; SEE FOOTNOTE 1 SUPERSEDED BY 302-6695; SEE FOOTNOTE 1 HAND TIGHTEN - ITEM 23 TO ROTATE FREELY USE LOCTITE 271

NOT SHOWN:

FOOTNOTES:

1. DWPC12XAPJ0000091, DWPC16XACJ0001391, DWPC24XAEJ0001102, DWPC30XACJ0000384, DWPVP30XHJ0000176. IF REPLACING 302-0587, 302-0589 OR 301-9219 REPLACE ALL WITH 302-6053, 302-6052, & 302-6695 RESPECTIVELY. 2. IF REPLACING 302-0257 CONTROL TOWER (SUNBELT P/N: 333-1002) ALSO ORDER 2X 105-799 AND 300-11401 HANDLE (SUNBELT P/N: 333-10001).

NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0396589

06

ID0425891

64

BRACKETS & EXTENSION C12X

2

5

1

4

3

01

ID0489495

65

BRACKETS & EXTENSION C12X

REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

1 302-6216 2 BRACKET 2 105-2377 6 FLG LK SCREW (M10-1.50 X 35MM) 3 106-387 10 FLG LOCKNUT (M10-1.50) 4 302-6539 1 EXTENSION 5 106-724 4 FLG SCREW (M10-1.50 X 25MM)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0489495

66

CLM3000 GPS KIT C16X, C24X, C30X, VP30

1 6 7

2 4

3

02

7

ID0712984

67

CLM3000 GPS KIT C16X, C24X, C30X, VP30 REF PART NO. NUMBER

190-2693 1 222-7232 2 303-4997 3 220-6781 4 215-3312 5* 106-013 6 106-956 7 107-414 8* 303-4228 9* 215-2801 10* 215-2901 11* 214-958 12* 106-574 13* 107-312 14* 240-7223

QTY

DESCRIPTION

CLM3000 GPS KIT 1 4G + GNSS ANTENNA 1 BRACKET 1 FMS - GPS 3657 W/DATA PLAN 1 GPS HARNESS - CANLINK 3000 SERIES 2 WASHER (3/16") 2 M4-.70 MM NYLON INSERT NUT 2 SCREW (M4-0.70 X 30MM,BUT SOC) 1 ANTENNA MOUNT 1 DEUT 8P DTM04-8P RCPT 1 WM-8P DTM WEDGE LOCK 8 DEUT CAVITY PLUG 0413-204-2005 (20 GA) 2 CLIP NUT (M6-1.00) 2 SCREW (M6-1.00 X 25MM, BUT SOC) 1 HOSTING PLAN - GPS END CUSTOMER DATA TERM START 2YR (5MB/MO)

REMARKS

NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED

NOT SHOWN:

FOOTNOTES:

NOTE:

190-2693 CLM3000 GPS KIT - THIS KIT INCLUDES PARTS THAT MAY NOT BE REQUIRED FOR EVERY UNIT. DISCARD UNUSED PARTS

02

ID0712984

68

NOTES:

ID0134963

69

HYDRAULICS

70

GROUND DRIVE HYDRAULICS C12X

18

26 SEE NOTE 1

6

7

29

9 29 6 7

3

22

14 17 21

20

15 17 1

7 25 6 28

4 2

34 SEE FOOT 8 NOTE 2 30 33 31 32

23

24

19

12 13

5 7 6

27 31

27

16

32

10 8

11

30 33 8 11

13 12

01

10 16

ID0479176

71

GROUND DRIVE HYDRAULICS C12X

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

QTY

DESCRIPTION

150-2925 1 TANK STRAINER (100MESH -16HB) 159-386 1 FILTER HEAD (12SF-12SF) 150-4388 1 HYDRAULIC FILTER - 10 MICRON 150-2560 1 TEE (12S-12H90-12H90) 155-174 1 S/O COUPLER (12S-12H90) 150-4290 34 BULK E-Z FORM HOSE (3/4) 110-353 5 WORM CLAMP (3/4" TO 1-1/2") 154-233 8 CONNECTOR (08S-08O) 154-227 1 CONNECTOR (06O-08S90) 150-4559 4 CONNECTOR (-08S-08ORF) 150-4558 2 VALVE BLOCK - P.O. CHECK 105-1937 8 BOLT (1/2-NC X 2-1/2", GD8) 106-743 8 WASHER (.531", HARDENED) 154-188 1 S/O COUPLER (16S-16H90) 150-4291 5 BULK E-Z FORM HOSE (1") 154-322 4 CONNECTOR (08O-10S90) 105-2499 2 WORM CLAMP (3/4" TO 1-3/4) 154-345 1 RUN TEE (06S-06O-06O) 159-157 1 QDC ADAPTER (02-06OF) 105-052 2 BOLT (3/8-NC X 1-1/4") 105-072 2 LOCK WASHER (3/8") 117-416 1 ABRASION SLEEVE (1.00" X 50") 150-3844 1 FLOW CHECK (08S-08O) 154-235 1 CONNECTOR (08S-08O90) 117-718 4 ABRASION SLEEVE (1.0" X 36") 150-4152 1 DOUBLE GEAR PUMP (6.6 CC/1.6 CC) 150-4904 2 HYDRAULIC MOTOR (38.0 CID) 150-2590 1 HARDLINE (-08) 157-443 1 HOSE (06OFX45-50"-3000) 150-4639 1 HOSE (08OFX90L-36"-3000) 150-4639 1 HOSE (08OFX90L-36"-3000) 150-4639 1 HOSE (08OFX90L-36"-3000) 150-4639 1 HOSE (08OFX90L-36"-3000) 150-4926 1 HYDRAULIC VALVE SD6 - 3 SECTION

REMARKS

SEE FOOTNOTE 1

RELIEF VALVE SETTING 2500 PSI. SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. 25" TO GROUND DRIVE VALVE, 9" TO ATTACHMENT. 2. USE LEVER BOX GASKET SEAL 500-2371; P.O. CHECK 500-1046.

NOTE:

1. 150-4899 S/O COUPLER (O8S-12H90) AND 154-296 CAP (04OF).

01

ID0479176

72

GROUND DRIVE HYDRAULICS C16X BEGINS WITH S/N: XXXXX

28 13

33 16

18

21

29

36

34

30 13

22

32

17

35

SEE FOOT 7 NOTE 2

16

29

16 31 13 20

25

24 2 3

1

14 19

23 26 22

10 8 11 9

15

12

27 36

SEE NOTE 1

16 13

9

1

6

11

7

4

5

8 7 5

3 2

02

10

4

6

ID0543521

73

GROUND DRIVE HYDRAULICS C16X BEGINS WITH S/N: XXXXX REF PART NO. NUMBER

QTY

DESCRIPTION

1 150-4284 2 HYDRAULIC MOTOR (48.0 CID) 2 105-1937 8 BOLT (1/2-NC X 2-1/2", GD8) 3 106-743 8 WASHER (.531", HARDENED) 4 150-4558 2 VALVE BLOCK - P.O. CHECK 5 150-4559 4 CONNECTOR (-08S-08ORF) 6 154-322 4 CONNECTOR (08O-10S90) 7 154-233 8 CONNECTOR (08S-08O) 8 150-4639 1 HOSE (08OFX90L-36"-3000) 9 150-4639 1 HOSE (08OFX90L-36"-3000) 10 150-4639 1 HOSE (08OFX90L-36"-3000) 11 150-4639 1 HOSE (08OFX90L-36"-3000) 12 159-386 1 FILTER HEAD (12SF-12SF) 13 150-4290 34 BULK E-Z FORM HOSE (3/4) 14 155-174 1 S/O COUPLER (12S-12H90) 15 150-2560 1 TEE (12S-12H90-12H90) 16 110-353 5 WORM CLAMP (3/4" TO 1-1/2") 17 150-4926 1 HYDRAULIC VALVE SD6 - 3 SECTION 18 154-227 1 CONNECTOR (06O-08S90) 19 150-4388 1 HYDRAULIC FILTER - 10 MICRON 20 117-718 4 ABRASION SLEEVE (1" X 36"") 21 154-188 1 S/O COUPLER (16S-16H90) 22 105-2499 2 WORM CLAMP (3/4" TO 1-3/4) 23 150-4291 6 BULK E-Z FORM HOSE (1") 24 150-2925 1 TANK STRAINER (100MESH -16HB) 25 105-757 2 BOLT (3/8-NC X 1-1/4", SOC, GD8, ZP) 26 106-396 2 WASHER (M10, HARDENED) 27 154-345 1 RUN TEE (06S-06O-06O) 28 159-157 1 QDC ADAPTER (02-06OF) 29 515-148 1 HOSE (04OFX90-10"-3000) 30 150-4901 1 CONNECTOR (08S-08O-04O90) 31 150-2590 1 HARDLINE (-08) 32 150-3844 1 FLOW CHECK (08S-08O) 33 150-5632 1 DOUBLE GEAR PUMP (11.2 CC/3.3 CC) 34 117-416 1 ABRASION SLEEVE (1.00" X 50") 35 150-4902 1 UNION (04O-04OFX90-.063,ORF) 36 157-443 1 HOSE (06OFX45-50"-3000)

REMARKS

SEE FOOTNOTE 1

RELIEF VALVE SETTING 2500 PSI. SEE FOOTNOTE 2

5-3/4" LENGTH USE LOCTITE 242 OR EQUIVALENT. TORQUE TO 44 FT-LB.

NOT SHOWN:

FOOTNOTES:

1. 25" TO GROUND DRIVE VALVE, 9" TO ATTATCHMENT 2. USE LEVER BOX GASKET SEAL 500-3271; P.O. CHECK 500-1046

NOTE:

1. RETURN FITTING 150-4899

02

ID0543521

74

GROUND DRIVE HYDRAULICS

C16X BEGINS WITH S/N: DWPC16XALH0000506 C16X ENDS WITH S/N: XXXXX

28 13

33 16

18

21

29

36

34

30 13

22

32

17

35

SEE FOOT 7 NOTE 2

16

29

16 31 13 20

25

24 2 3

1

14 19

23 26 22

10 8 11 9

15

12

27 36

SEE NOTE 1

16 13

9

1

6

11

7

4

5

8 7 5

3 2

05

10

4

6

ID0425405

75

GROUND DRIVE HYDRAULICS

C16X BEGINS WITH S/N: DWPC16XALH0000506 C16X ENDS WITH S/N: XXXXX REF PART NO. NUMBER

QTY

DESCRIPTION

1 150-4284 2 HYDRAULIC MOTOR (48.0 CID) 2 105-1937 8 BOLT (1/2-NC X 2-1/2", GD8) 3 106-743 8 WASHER (.531", HARDENED) 4 150-4558 2 VALVE BLOCK - P.O. CHECK 5 150-4559 4 CONNECTOR (-08S-08ORF) 6 154-322 4 CONNECTOR (08O-10S90) 7 154-233 8 CONNECTOR (08S-08O) 8 150-4639 1 HOSE (08OFX90L-36"-3000) 9 150-4639 1 HOSE (08OFX90L-36"-3000) 10 150-4639 1 HOSE (08OFX90L-36"-3000) 11 150-4639 1 HOSE (08OFX90L-36"-3000) 12 159-386 1 FILTER HEAD (12SF-12SF) 13 150-4290 34 BULK E-Z FORM HOSE (3/4) 14 155-174 1 S/O COUPLER (12S-12H90) 15 150-2560 1 TEE (12S-12H90-12H90) 16 110-353 5 WORM CLAMP (3/4" TO 1-1/2") 17 150-4926 1 HYDRAULIC VALVE SD6 - 3 SECTION 18 154-227 1 CONNECTOR (06O-08S90) 19 150-4388 1 HYDRAULIC FILTER - 10 MICRON 20 117-718 4 ABRASION SLEEVE (1" X 36"") 21 154-188 1 S/O COUPLER (16S-16H90) 22 105-2499 2 WORM CLAMP (3/4" TO 1-3/4) 23 150-4291 6 BULK E-Z FORM HOSE (1") 24 150-2925 1 TANK STRAINER (100MESH -16HB) 25 105-052 2 BOLT (3/8-NC X 1-1/4") 26 105-072 2 LOCK WASHER (3/8") 27 154-345 1 RUN TEE (06S-06O-06O) 28 159-157 1 QDC ADAPTER (02-06OF) 29 515-148 1 HOSE (04OFX90-10"-3000) 30 150-4901 1 CONNECTOR (08S-08O-04O90) 31 150-2590 1 HARDLINE (-08) 32 150-3844 1 FLOW CHECK (08S-08O) 33 150-4151 1 DOUBLE GEAR PUMP (11.2 CC/3.3 CC) 34 117-416 1 ABRASION SLEEVE (1.00" X 50") 35 150-4902 1 UNION (04O-04OFX90-.063,ORF) 36 157-443 1 HOSE (06OFX45-50"-3000)

REMARKS

SEE FOOTNOTE 1

RELIEF VALVE SETTING 2500 PSI. SEE FOOTNOTE 2

5-3/4" LENGTH TORQUE TO 31 FT-LB.

SUPERSEDED BY 150-5632. SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1. 25" TO GROUND DRIVE VALVE, 9" TO ATTATCHMENT 2. USE LEVER BOX GASKET SEAL 500-3271; P.O. CHECK 500-1046 3. WHEN REPLACING 150-4151 WITH 150-5632 ALSO REPLACE MOUNTING HARDWARE WITH 2X 105-757 BOLT (3/8-NC X 1-1/4", SOC) AND 2X 106-396 WASHER (M10, HARDENED). USE LOCTITE 242 OR EQUIVALENT WHEN REPLACING 2X 105-757, ALSO TORQUE TO 44 FT-LB.

NOTE:

1. RETURN FITTING 150-4899

05

ID0425405

76

GROUND DRIVE HYDRAULICS

C16X ENDS WITH S/N: DWPC16XALH0000505

16

13

SEE NOTE 1

29

28

25

21 13

18

16

30

17 7

13

11

26

30

27

31

8

12 19

22 23

SEE FOOT NOTE 2

15

24

20

14 16 13

20 1

2

3

2

3

1 11

5

6

4 7 6

06

5

10

9

8

7

4

ID0401692

77

GROUND DRIVE HYDRAULICS

C16X ENDS WITH S/N: DWPC16XALH0000505 REF PART NO. NUMBER

QTY

DESCRIPTION

1 150-4284 2 HYDRAULIC MOTOR (48.0 CID) 2 105-1937 8 BOLT (1/2-NC X 2-1/2", GD8) 3 106-743 8 WASHER (.531", HARDENED) 4 150-4558 2 VALVE BLOCK - P.O. CHECK 5 150-4559 4 CONNECTOR (-08S-08ORF) 6 154-322 4 CONNECTOR (08O-10S90) 7 154-233 8 CONNECTOR (08S-08O) 8 150-4639 1 HOSE (08OFX90L-36"-3000) 9 150-4639 1 HOSE (08OFX90L-36"-3000) 10 150-4639 1 HOSE (08OFX90L-36"-3000) 11 150-4639 1 HOSE (08OFX90L-36"-3000) 12 159-386 1 FILTER HEAD (12SF-12SF) 13 150-4290 34 BULK E-Z FORM HOSE (3/4) 14 155-174 1 S/O COUPLER (12S-12H90) 15 150-2560 1 TEE (12S-12H90-12H90) 16 110-353 4 WORM CLAMP (3/4" TO 1-1/2") 17 150-4926 1 HYDRAULIC VALVE SD6 - 3 SECTION 18 154-227 1 CONNECTOR (06O-08S90) 19 150-4388 1 HYDRAULIC FILTER - 10 MICRON 20 117-718 4 ABRASION SLEEVE (1" X 36"") 21 154-188 1 S/O COUPLER (16S-16H90) 22 111-011 2 WORM CLAMP (1" TO 1-3/4") 23 150-4291 5 BULK E-Z FORM HOSE (1") 24 150-2925 1 TANK STRAINER (100MESH -16HB) 25 150-4287 1 DOUBLE GEAR PUMP (11.2 CC/1.6 CC) 26 105-052 2 BOLT (3/8-NC X 1-1/4") 27 105-072 2 LOCK WASHER (3/8") 28 154-345 1 RUN TEE (06S-06O-06O) 29 159-157 1 QDC ADAPTER (02-06OF) 30 157-443 1 HOSE (06OFX45-50"-3000) 31 117-416 1 ABRASION SLEEVE (1.00" X 50")

REMARKS

SEE FOOTNOTE 1

RELIEF VALVE SETTING 2000 PSI. SEE FOOTNOTE 2

8" LENGTH

NOT SHOWN:

FOOTNOTES:

1. 25" TO GROUND DRIVE VALVE, 9" TO ATTATCHMENT 2. USE LEVER BOX GASKET SEAL 500-3271; P.O. CHECK 500-1046

NOTE:

1. RETURN FITTING 150-4899

06

ID0401692

78

GROUND DRIVE HYDRAULICS

C30X BEGINS WITH S/N: DWPC30XAHH0000188

26 25 SEE NOTE 1

32

12 15

17 34

34

27

31 23

33 12

30

28

16

15

7 12

8

11

13 15 12

18

9 19

21

3

22

1

36 5

10

4

2 8 6 36

2

19

3

05

24

1

10

15 29

14

SEE FOOT NOTE 2

20 35

5

7

6

9

4

ID0436326

79

GROUND DRIVE HYDRAULICS

C30X BEGINS WITH S/N: DWPC30XAHH0000188 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

QTY

DESCRIPTION

150-4284 2 HYDRAULIC MOTOR (48.0 CID) 105-1937 8 BOLT (1/2-NC X 2-1/2", GD8) 106-743 8 WASHER (.531", HARDENED) 150-4558 2 VALVE BLOCK - P.O. CHECK 150-4559 4 CONNECTOR (-08S-08ORF) 154-233 8 CONNECTOR (08S-08O) 150-4639 1 HOSE (08OFX90L-36"-3000) 150-4639 1 HOSE (08OFX90L-36"-3000) 150-4639 1 HOSE (08OFX90L-36"-3000) 150-4639 1 HOSE (08OFX90L-36"-3000) 159-386 1 FILTER HEAD (12SF-12SF) 150-4290 34 BULK E-Z FORM HOSE (3/4) 155-174 1 S/O COUPLER (12S-12H90) 150-2560 1 TEE (12S-12H90-12H90) 110-353 5 WORM CLAMP (3/4" TO 1-1/2") 150-4926 1 HYDRAULIC VALVE SD6 - 3 SECTION 154-227 1 CONNECTOR (06O-08S90) 150-4388 1 HYDRAULIC FILTER - 10 MICRON 117-718 4 ABRASION SLEEVE (1" X 36"") 154-188 1 S/O COUPLER (16S-16H90) 105-2499 2 WORM CLAMP (3/4" TO 1-3/4) 150-2925 1 TANK STRAINER (100MESH -16HB) 105-757 2 BOLT (3/8-NC X 1-1/4", SOC, GD8, ZP) 106-396 2 WASHER (M10, HARDENED) 154-345 1 RUN TEE (06S-06O-06O) 159-157 1 QDC ADAPTER (02-06OF) 515-148 1 HOSE (04OFX90-10"-3000) 150-4901 1 CONNECTOR (08S-08O-04O90) 150-2590 1 HARDLINE (-08) 150-3844 1 FLOW CHECK (08S-08O) 117-416 1 ABRASION SLEEVE (1.00" X 50") 150-2575 1 DOUBLE GEAR PUMP (14 CC/3.15 CC) 150-4902 1 UNION (04O-04OFX90-.063,ORF) 157-443 1 HOSE (06OFX45-50"-3000) 150-4291 6 BULK E-Z FORM HOSE (1") 154-322 4 CONNECTOR (08O-10S90)

REMARKS

SEE FOOTNOTE 1

RELIEF VALVE SETTING 2500 PSI. SEE FOOTNOTE 2

USE LOCTITE 242 OR EQUIVALENT. TORQUE TO 44 FT-LB.

6" LENGTH

NOT SHOWN:

FOOTNOTES:

1. 25" TO GROUND DRIVE VALVE, 9" TO ATTACHMENT. 2. USE LEVER BOX GASKET SEAL 500-3271; P.O. CHECK 500-1046

NOTE:

1. RETURN FITTING 150-4899

05

ID0436326

80

GROUND DRIVE HYDRAULICS

C24X AND C30X C30X ENDS WITH S/N:DWPC30XAHH0000187

SEE NOTE 2

1

8

3

4

9

12 11 13

10

5

18 25

6

SEE FOOT NOTE 1

13 27

10 17

2

7

14 26

22

23

22 23

14 20 19

15 16

24

17 10

10 21

09

21

20

19

ID0425876

81

GROUND DRIVE HYDRAULICS

C24X AND C30X C30X ENDS WITH S/N:DWPC30XAHH0000187 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

1 HYDRAULIC VALVE SD6 - 3 SECTION 1 HARDLINE (-08) 1 DOUBLE GEAR PUMP (11.2 CC/3.3 CC) 1 S/O COUPLER (16S-16H90) 2 WORM CLAMP (3/4" TO 1-3/4) 6 BULK E-Z FORM HOSE (1") 1 TANK STRAINER (100MESH -16HB) 1 RUN TEE (06S-06O-06O) 1 QDC ADAPTER (02-06OF) 9 CONNECTOR (08S-08O) 1 CONNECTOR (08S-08O90) 1 CONNECTOR (06O-08S90) 1 HOSE (06OFX45-50"-3000) 1 HOSE (08OFX90L-36"-3000) 1 HOSE (08OFX90L-36"-3000) 1 HOSE (08OFX90L-36"-3000) 1 HOSE (08OFX90L-36"-3000) 2 LOCK WASHER (3/8") 2 VALVE BLOCK - P.O. CHECK 4 CONNECTOR (-08S-08ORF) 4 CONNECTOR (08O-10S90) 2 HYDRAULIC MOTOR (48.0 CID) 8 WASHER (.531", HARDENED) 8 BOLT (1/2-NC X 2-1/2", GD8) 2 BOLT (3/8-NC X 1-1/4") 4 ABRASION SLEEVE (1" X 36"") 1 ABRASION SLEEVE (1.00" X 50")

150-4926 150-2590 150-4151 154-188 105-2499 150-4291 150-2925 154-345 159-157 154-233 154-235 154-227 157-443 150-4639 150-4639 150-4639 150-4639 105-072 150-4558 150-4559 154-322 150-4284 106-743 105-1937 105-052 117-718 117-416

DESCRIPTION

REMARKS

RELIEF VALVE SETTING 2500 PSI. SEE FOOTNOTE 1 SUPERSEDED BY 150-5632. SEE FOOTNOTE 2 5-3/4" LENGTH

TORQUE TO 31 FT-LB

NOT SHOWN:

FOOTNOTES:

1. USE LEVER BOX GASKET SEAL 500-3271; P.O. CHECK 500-1046 2. WHEN REPLACING 150-4151 WITH 150-5632 ALSO REPLACE MOUNTING HARDWARE WITH 2X 105-757 BOLT (3/8-NC X 1-1/4", SOC) AND 2X 106-396 WASHER (M10, HARDENED). USE LOCTITE 242 OR EQUIVALENT WHEN REPLACING 2X 105-757, ALSO TORQUE TO 44 FT-LB.

NOTE:

1. THIS PARTS PAGE SUPERSEDES OLD#ID0399746 2. RETURN FITTING 150-4899

09

ID0425876

82

ATTACHMENT DRIVE C12X/ C16X/ C24X/ C30X

7

10 7

9 15

14

8

1 7

11 13

2

12 7 5

4

11 3

6

SEE FOOTNOTE 1

05

ID0425895

83

ATTACHMENT DRIVE C12X/ C16X/ C24X/ C30X REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1 HYDRAULIC DCV SD5 (1-SPOOL) 1 CONNECTOR (06S-08090) 1 UNION (08O-08OFX90) 1 CONNECTOR (06S-06SF90) 1 CONNECTOR (06S-08O) 1 CONNECTOR (08S-08O) 2 HOSE (08OFX90L-96"-4000) 1 HYD MOTOR (195 CC) 2 CONNECTOR (08O-10S90) 1 ABRASION SLEEVE (1.75" X 93") 1 HOSE (08OFX45-53"-3000) 1 ABRASION SLEEVE (1" X 52") 1 REDUCER (10S-08SF) 1 RUN TEE (08S-08O-08O) 1 QDC ADAPTER (02-08OFX)

150-2547 154-253 154-256 154-460 154-246 154-233 150-4951 150-4057 154-322 105-2239 150-4657 117-218 155-193 154-299 159-158

DESCRIPTION

REMARKS

RELIEF VALVE SETTING 3500 PSI

C16X, C24X, C30X ONLY. SEE FOOTNOTE 1 FOR C12X

NOT SHOWN:

FOOTNOTES:

1. FASTER OPTION FOR C16X, C24X, & C30X AVAILABLE 150-4387 (140 CC). USE 150-4387 FOR C12X.

NOTE:

THIS PARTS PAGE SUPERSEDES OLD #1D0401830.

05

ID0425895

84

ATTACHMENT LIFT

C12X / C16X / C24X / C30X / VP30

12

2 3

11

4

10 5 6 3 2

1 3 4

10

8

2

9 3 2 7

9 11 13 06

ID0425903

85

ATTACHMENT LIFT

C12X / C16X / C24X / C30X / VP30 REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13

1 CYL (2.0 X 1.0 X 10.0) 4 FLG LK BOLT (3/8-NC X 1") 4 WASHER ZP (.406 X 1.50 X .125) 2 PIN (1" X 4.125") 1 SPACER (1.25 ID X .38) 1 COMPOSITION BUSHING (1") 1 COMPOSITION BUSHING (1.000") 1 CONNECTOR (04S-04O90) 2 ABRASION SLEEVE (1.00" X 60") 1 HOSE (04OFX-61"-3000) 1 HOSE (04OFX-61"-3000) 2 CONNECTOR (04O-06S) 1 CONNECTOR (04S-04O90,ORF)

151-076 105-826 105-2111 301-7051 362-2096 125-800 125-770 154-252 117-693 150-4641 150-4641 154-220 156-967

DESCRIPTION

REMARKS

USE LOCTITE 242

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. REF. #13, 156-967 IS USED ON C16X ONLY. C24X, C30X AND VP30 USE 154-401.

NOTE:

06

ID0425903

86

VARIABLE SPEED DRIVE OPTION C16X / C24X / C30X

7 2

6

1

8 4 3

5

11 15 8

15

7

10

9

12

14

13 14 18

19

13

16 17

05

ID0442010

87

VARIABLE SPEED DRIVE OPTION C16X / C24X / C30X REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

1 FLOW CONTROL VALVE 1 CONNECTOR (08S-08O) 2 NUT (1/4-NC) 2 LOCK WASHER (1/4) 1 PLATE - STOP 2 BOLT (1/4-NC X 2-1/2") 1 HOSE (08OFX90S-46"-3000) 1 HOSE (08OFX90S-38"-3000) 1 UNION (04O-04OFX90-.086,ORF) 2 RUN TEE (08S-08O-08O) 2 UNION (08O-08OFX90) 1 REDUCER (06O-08OF) 1 HOSE (06OFX45-50"-3000) 1 HOSE (08OFX45-53"-3000) 2 CONNECTOR (08S-08O90) 2 HYDRAULIC MOTOR TG (32.3 CID) 1 HYDRAULIC MOTOR (98 CC) 1 ABRASION SLEEVE (1.00" X 50") 1 ABRASION SLEEVE (1" X 52")

150-4508 154-233 105-078 105-079 302-5293 105-224 150-5184 150-5183 150-5272 154-299 154-256 154-262 157-443 150-4657 154-235 150-5182 150-4286 117-416 117-218

DESCRIPTION

REMARKS

SUNBELT 333-1088

NOT SHOWN:

FOOTNOTES:

NOTE:

05

ID0442010

88

See loose-leaf schematic included with this manual.

89

90

NOTES:

ID0134963

91

ELECTRICAL

92

ELECTRICAL SCHEMATIC

C16/C16X w/ VANGUARD ELECTRIC START

1 HYD COOLER FAN

M B

CABLE(+)

BATTERY BT1 FMS

1

3 2

2

F1

7

1

2

3A

3 F3 3A

A

B2 F2

15A

2A IGNITION SWITCH S2

ENGINE HARNESS

START RUN OFF

S A B

STARTER SOLENOID

RED M

ORG

M

BLK

L G

B1

YEL

STARTER MOTOR

WHT BRN

HOURMETER

1

- +

M1

8

1A

ENG. CONNECTION 1

2A F

WHT

ENG. CONNECTION 1

2A

M

RED FUEL SHUTOFF SOLENOID

REGULATOR RECTIFIER B+

L1

03

A C A C

FLYWHEEL STATOR

5 5

20 AMP

ID0392342

93

ELECTRICAL SCHEMATIC

C16/C16X w/ VANGUARD ELECTRIC START

1A

blk/red

From Fan to Ground

2 2A

red red/grn

Battery Positive Circuit Power from Engine to GPS, Fan

3

red/blu

From 15amp Fuse Holder to Fan

7

red/wht

GPS Power (1) to Fuse Holder (G)(2amp Fuse)

8

blk

Ref. Number B1 BT1 F1 F2 F3 L1 S2 SP2

Part Number n/a 140-2076 211-271 217-811 211-271 n/a n/a n/a

from Hourmeter to Spark plug Wire

COMPONENT DESCRIPTION Component Starter w/ solenoid Battery GPS Fuse Hyd. Fan Fuse GPS Fuse Fuel shut-off solenoid Ignition switch Engine oil pressure switch

Notes Engine Service Part ( Current Draw, Amps) 12V, 230CCA FUSE(ATC, 3 amp) FUSE(ATC, 15 amp) FUSE(ATC, 3AMP) Engine Service Part Engine Service Part Engine Service Part

WIRING HARNESS Ref. No. Part No. 1 215-0071 MissMollyMae289 215-3280 2 215-0042 3 215-0060

03

Quantity 1 1 1 1

Description Fan Harness ENDS W/Sn: Fan Harness BEGINS W/Sn: Neg. Batt. Cable (6ga. X 33", Blk) Pos. Batt. Cable (6ga. X 36", Red)

ID0392342

94

ELECTRICAL SCHEMATIC C24X/C24 ENDS W/SN:

REGULATOR/ RECTIFIER W WHT (15)

GRY

Bl

Gr Gr W/Bu Bl/Y

U2

WHT/BLU (11)

F4 Fuse (30A)

BLK (7)

GRY BLK/YEL (5)

GRY

BLU (8)

YEL (6) J4 P4 L1

WHT (15)

BLK (7)

LO ST COMBINATION SWITCH

J3 P3 BLK (7)

GRY

BLU (8)

-01

B1 WHT (15)

GRY GRY

J2 P2 -04 -03

-02

STARTER MOTOR

M

(2) CABLE

J10 P10

HOUR METER M2

BLK/WHT (14)

YEL BLK/YEL (6) (5)

CHARGE COIL (17A) G1

BAT

GRN (9) BLK YEL (5) (6) BLU (8)

GRN (9)

BLK/YEL (5)

WHT (15)

BLK/YEL (5)

GND

GRN (9)

P8 J8

WHT/BLU (11)

U1 CONTROL BOX S2 IGN

BLK (7) GRN (9) WHT (15) BLK/YEL (5) BLK/WHT (14)

BATTERY BT1 (1) CABLE

YEL BLK/YEL (6) (5) BLU BLK/RED (8) (7)

BLK/WHT (14)

FMS F2 RED/BLU (3)

WHT/YEL (16)

G

H

RED/WHT (10)

3A

WHT (15) RED (2)

BLK/YEL (5) BLU (8)

BLK/RED (7)

YEL/BLK (4) FAN MOTOR

A F1

YEL (6)

15A

BLK/YEL (5)

ORG/GRN (13)

B

BLK/YEL (5)

START RELAY 3 K1 5

J1 P1

SUNG SWAN 303-1AH-C-R1

ORG (12)

D (30)

(87)

(86)

(85)

F3

BLK (7)

BLU (8)

BLK (1)

BLK/YEL (5)

L2 BLK/YEL (5) J5 P5

FUEL CUT SOLENOID

No 1 IGNITION COIL P12

BLU (8)

BLK (7)

YEL (6)

J6 P6

E2 P13

BLK (7) YEL (6)

No 2 IGNITION COIL

SPARK PLUG

E1 J7 P7

SPARK PLUG YEL (6)

03

M1

2

1

BLK/YEL (5)

M

Inline Fuse (3A)

C YEL (6)

BLK (1)

3 2

1

OIL LEVEL SWITCH S1

ID0402531

95

ELECTRICAL SCHEMATIC C24X/C24 ENDS W/SN:

ELECTRICAL COMPONENTS Ref. #

Part #

Component

B1 195-1582 Starter BT1 140-2076 Battery E1 see notes Spark Plug E2 see notes Spark Plug F1 211-292 Main Fuse F2 211-289 FMS Fuse F3 211-271 FMS Fuse F4 BATTERY FUSE ON IGNITION G1 Charge Coil (17A) J1 see note Engine Connection J2 see note Engine Connection J3 see note Combination switch to Starter Connection J4 see note Hourmeter to Main Harness Connection J5 Engine to No.1 Ignition Coil Connection J6 Engine to No.2 Ignition Coil Connection J7 Engine to Oil Level Switch Connection Regulator/Rectifier to Charge & Fuel Solenoid J8 Connection J9 Regulator/Rectifier to Battery Connection J10

03

Notes

supplied by Honda 12V, 230 CCA, WET supplied by Honda supplied by Honda 15A MINI ATC 3A MINI ATC 3A ATC 30A ATC (HONDA SUPPLIED) No Service Parts Available Extention of Harness Extention of Harness Extention of Harness Extention of Harness

Regulator/Rectifier to Charge Coil Connection

J11 K1 L1 L2 M1 M2 P1 P2

see note Regulator/Rectifier to Engine Connection Start Relay see note Starter Solenoid see note Fuel Solenoid 500-1156 Fan see note Hourmeter Engine Connection Engine Connection

P3 P4

Combination Switch to Starter Connection Hourmeter to Main Harness Connection

P5

Engine to No.1 Ignition Coil Connection

P6

Engine to No.2 Ignition Coil Connection

P7 P8

Engine to Oil Level Switch Connection Regulator/Rectifier to Charge & Fuel Solenoid Connection

P9 P10 P11 P12 P13 S1 S2 U1 U2

Regulator/Rectifier to Battery Connection Regulator/Rectifier to Charge Coil Connection Regulator/Rectifier to Engine Connection No. 1 Iginition Coil Connection No.2 Ignition Coil Connection see note Oil Level Switch see note Combonation Switch 195-1537 Control Box 215-1328 Regulator/Rectifier

Extention of Harness Micro (SPDT) supplied by Honda 12V 12V supplied by Honda Extention of Harness Extention of Harness

Part of Engine Part of Engine No Service Parts Available Supplied by Honda

ID0402531

96

ELECTRICAL SCHEMATIC C24X/C24 ENDS W/SN:

ELECTRICAL CIRCUITS Circuit #

1 2 On Eng. On Eng. On Eng. On Eng. On Eng. 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Wire Color Function blk red

gry grn blk/wht

wht/blu wht red/blu yel/blk blk/yel yel blk blu grn red/wht wht/blu org org/grn blk/wht wht wht/yel

Ground to fan and relay Stater motor to fuse Regulator/Rectifier to Charge Coil (Supplied by Honda) From grnd In( Combination Switch) to Hourmeter Starter Motor to ST on Combination Switch Regulator/Rectifier to Pigtail (Supplied by Honda) Regulator/Rectifier to Bat. in (Combination Switch) From Batt to 3 amp Fuse for FMS From FMS to Inline Fuse Start relay to fuel cut solenoid Hourmeter in Control Box to Ignition coils & Oil Level Switch Ignition in Control Box to Ignition Coils #1, #2 Hourmeter to No.1 Ignition Coil From grnd In( Combination Switch) to Hourmeter from 3amp fuse to FMS From Regulator/Rectifier pigtail Fuse to Starter Relay Fan motor to Start Relay Starter Motor to ST on Combination Switch From Starter Motor (+) to Bat. On (Combination Switch) Jumper from Regulator/Rectifier to Bat. in (Combination Switch)

ELECTRICAL HARNESS Ref. #

Part #

Qty.

Description

1

215-0072

1 1 1 1

Fan Harness Sn Ending:

215-3281

2 3

03

215-0060 215-0042

Fan Harness Sn Begining: Battery Cable ( + Pos., Red 6 Ga. X 33") Battery Cable (- Neg., Blk 6 Ga. X 36")

ID0402531

97

98

ELECTRICAL SCHEMATIC

C30X w/ VANGUARD ELECTRIC START

BATTERY BT1

1

2 FMS

1A

3 2

7

1

2A

2A

2 B1

IGNITION SWITCH BAT

6

IGN

3

ST MAG

S2

1A

ENG. 31

STARTER SOLENOID M

4

RED

1

6

2

YEL 2

E.O.P. SWITCH

GRY 3

SP2

BRN

STARTER MOTOR

FUEL SHUTOFF SOLENOID L1

4

2 4

BLK

1

5 GRN

1A

6 ENG 31-1

ENGINE HARNESS

RED

1

2

YEL 2 GRY 3 BRN 4 BLK

REGULATOR RECTIFIER

5 GRN 6

B+ HOURMETER M1

2 15A

12

+ -

A C A C

FLYWHEEL STATOR

5 5

20 AMP

HYD COOLER FAN B2 A

M

B

1A

02

ID0391928

99

ELECTRICAL SCHEMATIC

C30X w/ VANGUARD ELECTRIC START

Circuit Number 1 1A 2 2A 3 4 5 6 7 8 9 10 11 12

02

Wire Color blk blk/red red red/blu yel blk blk gry red/wht

org

Function System ground Medium current ground Battery positive circuit From Fuse Holder (H) to Starter Ignition (Start Circuit) to Starter solenoid) Spark Advance Module to Magneto Ground Circuit & E.O.P. Switch Voltage Regulator to Flywheel Stator Ignition Circuit to Fuel Shut Off GPS Power (1) to Fuse Holder (G)

Fuse Holder (B) to Fan motor (B)

ID0391928

100

ELECTRICAL SCHEMATIC

C30X w/ VANGUARD ELECTRIC START

COMPONENT DESCRIPTION Ref. Number B1

Part Number n/a

Component Starter w/ solenoid

Notes Engine Service Part ( Current Draw, Amps)

BT1 F1 F2 L1 S2 SP2

215-256 211-289 211-292 n/a n/a n/a

Battery GPS Fuse Hyd. Fan Fuse Fuel shut-off solenoid Ignition switch Engine oil pressure switch

"Interstate" 12v, SP30, 250 CCA, 310 CA FUSE(Mini ATC, 3 amp) FUSE(Mini ATC, 15 amp) Engine Service Part Engine Service Part Engine Service Part

Ref. No. 1 2 3

Part No. 215-2268 215-0042 215-0060

WIRING HARNESS

02

Quantity 1 1 1

Description Fan Harness Neg. Batt. Cable (6ga. X 33", Blk) Pos. Batt. Cable (6ga. X 36", Red)

ID0391928

101

102

ELECTRICAL DIAGRAM FAN HARNESS C16X/C16

CAP FMS Pos COL

LBL

1

RED/WHT

2

RED

2

3

BLK

1

4

CP

-

FMS 4 3

1 2

15A

FAN- FUSE FAN- FUSE

GROUND B

A

GROUND

Pos COL

LBL

A

RED

2

B

RED/BLU 3

Pos COL LBL 1

BLK 1

FAN A B

ENGINE CONNECTION 1-1

ENGINE CONNECTION 1-1 Pos

COL

LBL

1

RED

2

FAN Pos COL

ENGINE CONNECTION 1

ENGINE CONNECTION 1 Pos

COL

LBL

1

RED

2

LBL

A

RED/BLU 3

B

BLK

1

1

FUSE HLDR GPS-POWER GPS-POWER Pos COL 1

01

RED/WHT

FUSE 2 2A

ID0391814

103

ELECTRICAL DIAGRAM FAN HARNESS C16X/C16 REF PART NO. NUMBER

1

215-0071

QTY

DESCRIPTION

1

FAN HARNESS

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0391814

104

ELECTRICAL DIAGRAM FAN HARNESS C24 & C24X

TO FAN

1

TO STARTER

TO POWER WIRE TO ENGINE GND

TO POWER WIRE TO FMS 01

ID0747816

105

ELECTRICAL DIAGRAM FAN HARNESS C24 & C24X

01

ID0747816

106

ELECTRICAL DIAGRAM FAN HARNESS C24 & C24X REF PART NO. NUMBER

QTY

1

1 FAN HARNESS

215-3350

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0747816

107

108

ELECTRICAL DIAGRAM C24X/C24

FMS-CAP 1 2

TO COMBO

TO FMS

Pos

COL

LBL

1

WHT/YEL

16

Pos COL

TO COMBO

TO IGNITION/RECTIFIER HARNESS

LBL

1

RED/WHT 10

Pos

COL

LBL

2

RED

2

1

BLK/YEL

5

3

BLK

1

2

BLK/RED

7

4

-

-

3

YEL

6

TO FMS

4

BLU

8

4 3

B 1 CAP

4 3

TO IGNITION/RECTIFIER HARNESS

1 2

1

2

3

4

B1

M

F B1 Pos COL 1

LBL

WHT 15

-AA1

A 1 CAP

A1 Pos COL 1

LBL

TO GROUND CONTROLLER

TO GROUND CONTROLLER

01

TO COMBO SWITCH/HOURMETER

BLK/WHT 14

Pos

COL

LBL

1

BLK

1

3 1

4 2

Pos COL

LBL

1

BLK/YEL

5

2

BLK/RED

7

3

YEL

6

4

BLU

8

1

TO COMBO SWITCH/HOURMETER

ID0391126

109

ELECTRICAL DIAGRAM C24X/C24

RELAY/FUSE HOLDER

CAP

RELAY-1 FUSES

Pos COL

LBL

A

RED

2

B

ORG

12

C

BLK/YEL

5

D

ORG

12

E

BLK

1

F

ORG/GRN

13

G

RED/BLU

3

H

RED/WHT

10

RELAY/FUSE HOLDER ORG

TO REGULATOR/RECTIFIER HARNESS

15

TO REGULATOR/RECTIFIER HARNESS

Pos COL

LBL

1

1

BLK

Pos

COL

LBL

1

WHT/YEL

16

C

ORG

D

OMRON

G8VA-1A4T -R01-DC12

2 H

TO GROUND 1

B

A

G

F

E

D

C

B

A

E

F

G

H

TO FAN

TO GROUND 1

B A TO FAN Pos COL

LBL

A

ORG/GRN 13

B

BLK

1

-A-

F

1

TO SOLENOID TO STARTER TO STARTER -1

FMS-POWER

TO STARTER

01

Pos COL

LBL

1

2

RED

LBL

1

14

BLK/WHT

FMS-POWER

TO STARTER -1 Pos COL

LBL

Pos COL

LBL

1

15

1

3

WHT

TO SOLENOID Pos COL

RED/BLU

ID0391126

110

ELECTRICAL DIAGRAM C24X/C24 REF PART NO. NUMBER

QTY

DESCRIPTION

1

1

FAN HARNESS

215-0072

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0391126

111

112

ELECTRICAL DIAGRAM C30X/C30 ENG. 31 Pos COL

LBL

1

RED

2

2

YEL

3

GRY

4

BRN

5

BLK

6

GRN

ENG. 31 1 2 3

6 5 4

1

ENG. 31-1 Pos COL

LBL

1

RED

2

2

YEL

3

GRY

4

BRN

5

BLK

6

GRN

ENG. 31-1 6 5 4

1 2 3

FAN A B

FAN Pos COL

LBL

A

ORG 12

B

BLK

1A

FMS 4 3

1 2

1 2

FUSE HOLDER 1

FMS CAP

FMS Pos COL

4

-

-

CAP

GPS-POWER

ORG

12

-

-

-

-

-

-

F

-

-

G

RED/WHT 7

H

RED/BLU 2A

D

B C

1A

2

C

B

2

BLK

RED

D

A

RED

3

LBL

A F

2

E

RED/WHT 7

Pos COL

G

1

FUSE HOLDER 1

LBL

E

H

4 3

GPS-POWER Pos COL 1

LBL

RED/BLU 2A

FUSES A

B

C

D

15 2

GROUND H

G

F

E

GROUND

01

Pos COL

LBL

1

1A

BLK

ID0346162

113

ELECTRICAL DIAGRAM C30X/C30 REF PART NO. NUMBER

1

215-2268

QTY

DESCRIPTION

1

FAN HARNESS

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0346162

114

CABLES

BATTERY CABLE (6GA.X 36", RED)

1

TO STARTER

TO STARTER Pos GA COL 1

01

6

RED

TO BATTERY

INSTALL BOOT BEFORE RING Pos

GA COL

1

6

RED

ID0383325

115

CABLES

BATTERY CABLE (6GA.X 36", RED) REF PART NO. NUMBER

1

215-0060

QTY

1

DESCRIPTION

REMARKS

BATTERY CABLE (6GA.X 36", RED)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0383325

116

CABLES

BATTERY CABLE (6GA. X 33", BLK)

1

(-) BATTERY ENGINE GROUND

(-) BATTERY ENGINE GROUND Pos CKT GA COL Type Term 1

01

1

6

Pos CKT GA COL Type Term 1

1

6

BLK SGT 2105006

BLK SGT 2106006

ID0368247

117

CABLES

BATTERY CABLE (6GA. X 33", BLK) REF PART NO. NUMBER

1

215-0042

QTY

1

DESCRIPTION

REMARKS

BATTERY CABLE (6GA. x 33", BLK)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0368247

118

NOTES:

ID0134963

119

ACCESSORIES

120

BACKFILL BLADE

C12X / C16X / C24X / C30X

2

1

02

ID0432957

121

BACKFILL BLADE

C12X / C16X / C24X / C30X REF PART NO. NUMBER

QTY

1 302-2509 2 183-411

1 BLADE 1 PULL PIN (1/2" X 2")

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0427088

02

ID0432957

122

35K WEIGHTS 36" SHARK II

4

3

5

3

3 4

4

1

3 2 1 7

04

6

4

ID0401873

123

35K WEIGHTS 36" SHARK II REF PART NO. NUMBER

QTY

1 301-9658 2 106-706 3 106-645 4 105-2206 5 106-743 6 106-391 7 301-9839

8 WEIGHT 4 FLG LK NUT (M12-1.75, CL 10, PRV TQ) 4 SCREW (M12-1.75 X 110MM, 10.9) 4 SCREW (M12-1.75 X 150MM, 10.9 - ZP) 4 WASHER (.531", HARDENED) 4 WASHER (M12) 4 SPACER

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0401873

124

35K WEIGHT KIT 48" CUP AND COMBO

1 2 5 3

8

4 5

2

5

6

7

4 3 7

04

6 5

ID0366879

125

35K WEIGHT KIT 48" CUP AND COMBO REF PART NO. NUMBER

QTY

1 301-9658 2 106-645 3 106-706 4 106-618 5 105-2206 6 106-391 7 301-9839 8 106-743

9 WEIGHT 2 SCREW (M12-1.75 X 110MM, 10.9) 4 FLG LK NUT (M12-1.75, CL 10, PRV TQ) 2 SCREW (M12-1.75 X 130MM) 4 SCREW (M12-1.75 X 150MM, 10.9 - ZP) 4 WASHER (M12) 4 SPACER 4 WASHER (.531", HARDENED)

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0366879

126

35K WEIGHT KIT 48" SHARK II

2

5

1

4

2

7 2 5

3

5

6 2

4 6

04

3

5

ID0400593

127

35K WEIGHT KIT 48" SHARK II REF PART NO. NUMBER

QTY

1 301-9658 2 106-855 3 106-391 4 106-706 5 105-2206 6 301-9839 7 106-743

12 WEIGHT 4 SCREW (M12-1.75 X 140MM) 4 WASHER (M12) 4 FLG LK NUT (M12-1.75, CL 10, PRV TQ) 4 SCREW (M12-1.75 X 150MM, 10.9 - ZP) 4 SPACER 4 WASHER (.531", HARDENED)

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0400593

128

35K DURATOOTH CHAINS 4P CHAIN ASSEMBLIES

2

1

3 4

5 8

6

7

CHAIN ASSEMBLIES

REPAIR PART# 130-1101 130-1102 130-1103 130-1104 135-1230 135-1231 106-400 105-099 137-214 105-047 136-029 105-258

04

135-1601 1 0 0 0 6 7 13 13 13 26 0 0

135-1602 0 1 0 0 8 8 16 16 16 32 0 0

135-1603 135-1604 135-1605 135-1606 135-1607 135-1608 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 1 0 1 1 0 0 0 9 11 8 10 6 8 7 8 8 11 9 11 12 7 8 9 17 21 12 17 21 7 8 9 24 25 32 17 21 19 32 34 44 34 42 26 0 6 8 8 10 0 16 20 0 12 16 0

ID0436038

129

35K DURATOOTH CHAINS 4P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-1601 135-1602 135-1603 135-1604 135-1605 135-1606 135-1607 135-1608

DESCRIPTION

REMARKS

35K 4P DURA 52P 4.4 35K 4P DURA 62P 4.4 35K 4P DURA 68P 4.4 35K 4P DURA 84P 4.4 35K 4P DURA 52P 6.4 35K 4P DURA 62P 6.4 35K 4P DURA 68P 6.4 35K 4P DURA 84P 6.4

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

130-1101 35K 4P DIG CHAIN 52P 130-1102 35K 4P DIG CHAIN 62P 130-1103 35K 4P DIG CHAIN 68P 130-1104 35K 4P DIG CHAIN 84P 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-099 BOLT (3/8-NC X 7/8") 137-214 LONG SPACER, 35K DIG CHAIN 105-047 LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-258 BOLT (3/8-NC X 3-3/4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085.

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

04

ID0436038

130

35K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

1 2 3 4 5 6

11 10 9 8 7

CHAIN ASSEMBLIES

REPAIR PART# 135-1600 137-218 135-1531 0 0 137-208 0 0 130-1105 1 0 137-210 0 0 137-209 0 1 135-1230 11 13 135-1231 11 13 106-400 22 26 105-099 22 26 137-214 22 26 105-047 44 52 136-029 0 0 105-258 0 0

02

137-217 0 0 0 0 1 13 13 14 14 38 52 12 24

137-215 0 0 0 1 0 15 16 31 31 31 62 0 0

137-216 0 0 0 1 0 15 16 15 15 47 62 16 32

137-219 1 0 0 0 0 17 17 34 34 34 68 0 0

137-221 1 0 0 0 0 17 17 18 18 50 68 16 32

135-1450 135-1451 0 0 1 1 0 0 1 1 0 0 19 19 20 20 39 19 39 19 39 59 78 78 0 20 0 40

137-220 1 1 0 0 0 21 21 42 42 42 84 0 0

137-222 1 1 0 0 0 21 21 22 22 62 84 20 40

ID0440801

131

35K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 137-219 2 137-216 3 137-215 4 137-217 5 137-218 6 135-1600 7 137-221 8 135-1450 9 135-1451 10 137-220 11 137-222

1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

35K 2P DURA 68P 4.6 35K 2P DURA 62P 6.6 35K 2P DURA 62P 4.6 35K 2P DURA 52P 6.6 35K 2P DURA 52P 4.6 35K 2P DURA 44P 4.4 35K 2P DURA 68P 6.6 35K 2P DURA 78P 4.6 35K 2P DURA 78P 6.6 35K 2P DURA 84P 4.6 35K 2P DURA 84P 6.6

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 130-1105 35K 2P DIG CHAIN 44P 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-099 BOLT (3/8-NC X 7/8") 137-214 LONG SPACER, 35K DIG CHAIN 105-047 LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-258 BOLT (3/8-NC X 3-3/4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085.

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

02

ID0440801

132

35K ALLIGATOR/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

5

6

4 3 2 1

REPAIR PART# 137-229 135-1531 0 137-208 0 130-1105 0 137-210 0 137-209 1 135-1230 6 135-1231 6 136-163 2 136-165 2 136-164 10 106-400 12 105-098 40 137-214 40 137-212 12 105-814 52 136-029 0 105-022 0

03

CHAIN ASSEMBLIES 137-230 0 0 0 1 0 8 7 3 3 10 16 46 46 16 62 0 0

137-231 1 0 0 0 0 6 6 5 5 12 12 56 56 12 68 0 0

135-1456 135-1457 137-232 0 0 1 1 1 1 0 0 0 1 1 0 0 0 0 7 10 135 6 9 7 6 3 7 6 3 7 14 14 14 12 12 16 66 42 68 66 66 68 12 12 16 78 78 84 0 12 0 0 24 0

ID0440916

133

35K ALLIGATOR/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6

1 1 1 1 1 1

137-229 137-230 137-231 135-1456 135-1457 137-232

DESCRIPTION

35K 2P CMB DUR/ALG B 52P 4.6 35K 2P CMB DUR/ALG B 62P 4.6 35K 2P CMB DUR/ALG B 68P 4.6 35K 2P CMB DUR/ALG B 78P 4.6 35K 2P DURA/ALG B/O COM 78P 6.6 35K 2P CMB DUR/ALG B 84P 4.6

REMARKS

USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED USES 131-259 INSERT BIT-CARBIDE TIPPED

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 130-1105 35K 2P DIG CHAIN 44P 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 136-163 RIGHT BIT HOLDER 136-164 CENTER BIT HOLDER 136-165 LEFT BIT HOLDER 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-098 BOLT (3/8-NC X 3") 137-214 LONG SPACER, 35K DIG CHAIN 137-212 SHORT SPACER, 35K DIG CHAIN 105-814 FLG LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-022 BOLT (3/8-NC X 4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K&35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

03

ID0440916

134

35K SHARK/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

4

1

2

3

5

6

05

8

9 10

CHAIN ASSEMBLIES

REPAIR PART# 137-233 135-1531 0 137-208 0 130-1105 0 137-210 0 137-209 1 135-1230 6 135-1231 6 135-637 2 135-638 2 135-639 10 106-400 12 105-098 40 137-214 40 137-212 12 105-814 52 136-029 0 105-022 0 137-207 0 131-1011 0

7

135-1021 0 0 0 0 1 6 6 2 2 10 12 20 40 12 52 10 20 0 0

137-235 0 0 0 1 0 8 7 3 3 10 16 46 46 16 62 0 0 0 0

137-236 1 0 0 0 0 6 6 5 5 12 12 56 56 12 68 0 0 0 0

135-1445 135-1454 135-1455 137-237 1 0 0 1 0 1 1 1 0 0 0 0 0 1 1 0 0 0 0 0 6 7 10 7 6 6 9 7 4 6 3 6 4 6 3 6 14 14 14 16 12 16 12 16 28 62 42 68 56 62 66 68 12 16 12 16 68 78 78 84 14 0 12 0 28 0 24 0 0 0 0 0 0 0 0 0

135-1540 135-1541 0 0 0 0 0 0 0 0 0 0 6 7 6 6 5 4 5 4 11 12 14 12 52 30 52 54 14 12 66 66 0 12 0 24 0 0 1 1

ID0440984

135

35K SHARK/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10

1 1 1 1 1 1 1 1 1 1

137-233 135-1021 137-235 135-1540 135-1541 137-236 135-1445 135-1454 135-1455 137-237

DESCRIPTION

REMARKS

35K 2P CMB DUR/SHK B 52P 4.6 35K 2P CMB DURA/SHK B 52P 6.6 35K 2P CMB DUR/SHK B 62P 4.6 35K 2P CMB DUR/SHK B 66P 4.6 35K 2P SHK B/O COM 66P 6.0 35K 2P CMB DUR/SHK B 68P 4.6 35K 2P SHK B/O COM 68P 6.0 35K 2P CMB DUR/SHK B 78P 4.6 35K 2P CMB DUR/SHK B 78P 6.6 35K 2P CMB DUR/SHK B 84P 4.6

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 130-1105 35K 2P DIG CHAIN 44P 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 135-1230 DURATOOTH, LEFT 3/16" 33/35K 135-1231 DURATOOTH, RIGHT 3/16" 33/35K 135-637 33/35K RIGHT BOLT-ON SHARK ADAPTER 135-638 33/35K LEFT BOLT-ON SHARK ADAPTER 135-639 33/35K CENTER CUT BOLT-ON SHARK ADAPTER 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-098 BOLT (3/8-NC X 3") 137-214 LONG SPACER, 35K DIG CHAIN 137-212 SHORT SPACER, 35K DIG CHAIN 105-814 FLG LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-022 BOLT (3/8-NC X 4")

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K &35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

05

ID0440984

136

35K SHARK & ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

5

4 3

2

1

6

03

8

CHAIN ASSEMBLIES

REPAIR PART# 135-1531 137-208 137-210 137-209 136-163 136-164 136-165 135-637 135-638 135-639 106-400 105-098 137-214 137-212 105-814 136-029 105-022

7

137-223 0 0 0 1 4 18 4 0 0 0 16 36 36 16 52 0 0

137-224 0 0 1 0 5 21 5 0 0 0 20 42 42 20 62 0 0

137-225 1 0 0 0 5 24 5 0 0 0 24 44 44 24 68 0 0

137-226 0 0 0 1 0 0 0 4 4 18 16 36 36 16 52 0 0

137-227 0 0 1 0 0 0 0 5 5 21 20 42 42 20 62 0 0

137-228 1 0 0 0 0 0 0 5 5 24 24 44 44 24 68 0 0

135-1452 135-1453 0 0 1 1 1 1 0 0 0 0 0 0 0 0 6 6 6 6 27 27 24 24 54 30 54 54 24 24 78 78 0 12 0 24

ID0444723

137

35K SHARK & ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

137-226 137-227 137-228 135-1452 135-1453 137-223 137-224 137-225

DESCRIPTION

35K 2P SHK B/O 52P 4.3 35K 2P SHK B/O 62P 4.3 35K 2P SHK B/O 68P 4.3 35K 2P SHK B/O 78P 4.3 35K 2P SHK B/O 78P 6.3 35K 2P ALG B/O 52P 4.3 35K 2P ALG B/O 62P 4.3 35K 2P ALG B/O 68P 4.3

REMARKS

SEE F/N 1 SEE F/N 1 SEE F/N 1

CHAIN ASSEMBLY COMPONENTS NOT SHOWN:

135-1531 35K DIGGING CHAIN 2P (68P) 137-208 35K DIGGING CHAIN 2P (16P) 137-210 35K DIGGING CHAIN 2P (62P) 137-209 35K DIGGING CHAIN 2P (52P) 136-163 RIGHT BIT HOLDER 136-164 CENTER BIT HOLDER 136-165 LEFT BIT HOLDER 135-637 33/35K RIGHT BOLT-ON SHARK ADAPTER 135-638 33/35K LEFT BOLT-ON SHARK ADAPTER 135-639 33/35K CENTER CUT BOLT-ON SHARK ADAPTER 106-400 BOLT (3/8-NC X 2-3/4", GD8) 105-098 BOLT (3/8-NC X 3") 137-214 LONG SPACER, 35K DIG CHAIN 137-212 SHORT SPACER, 35K DIG CHAIN 105-814 FLG LOCKNUT (3/8-NC) 136-029 TOOTH SPACER (1") 105-022 BOLT (3/8-NC X 4")

FOOTNOTES:

1. USES 131-259 INSERT BITS

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

03

ID0444723

138

ROTOWITCH

C16X/ C24X/ C30X

34

33 32 4

1 2

37 22

7 6

36 20 21

9 23

3

7

23 24

8

24

5

35

8

9

12 11 13

4 9

33

14 15

8

39 27

10 38

40 19

16

14

17 17 18

26 28 25 19

29 30 31

06

ID0425923

139

ROTOWITCH

C16X/ C24X/ C30X REF PART NO. NUMBER

QTY

1 154-253 2 154-460 3 154-246 4 150-4654 5 105-2127 6 118-062 7 150-4654 8 150-1866 9 150-1865 10 302-0709 11 106-030 12 105-273 13 149-841 14 150-4797 15 117-412 16 105-2126 17 154-322 18 150-4387 19 150-4796 20 110-555 21 105-1795 22 150-3047 23 154-418 24 154-279 25 105-002 26 302-0558 27 105-065 28 351-219 29 182-092 30 180-723 31 160-1059 32 302-0644 33 105-1877 34 107-003 35 106-709 36 106-386 37 150-3048 38 150-6055 39 105-2143 40 106-387

1 CONNECTOR (06S-08090) 1 CONNECTOR (06S-06SF90) 1 CONNECTOR (06S-08O) 1 HOSE (08OFX, 08MB-63"-4000) 1 ABRASION SLEEVE (1.00" X 65") 1 ABRASION SLEEVE (1.00" X 62"") 1 HOSE (08OFX, 08MB-63"-4000) 3 QDC ADAPTER (08-08SF) 3 QDC BODY (08-08SF) 1 MOUNT - ROTOWITCH 4 LOCK WASHER (M12) 4 SCREW (M12-1.75 X 30MM) 2 BK CONNECTOR (08S-08OBK) 1 HOSE (08OFX90L-35"-4000) 1 ABRASION SLEEVE (1" X 34") 1 ABRASION SLEEVE (1" X 35") 2 CONNECTOR (08O-10S90) 1 HYDRAULIC MOTOR (PARKER TL 140) 1 HOSE (08OFX90L-36"-4000) 1 CLAMP (1-7/8") 1 FLG LK SCREW (M8-1.25 X 20mm) SERRATED 1 QDC COVER (3/8M, PVC, YELLOW) 2 UNION (08S-08OFX90) 2 CONNECTOR (08O-10S) 2 BOLT (1/2-NC X 2 1/4") 1 HYDRAULIC MOTOR MOUNT 2 LOCKNUT (1/2-NC, GR B, PRV TQ) 1 YOKE GUARD 1 YOKE (1-1/4", 5/16" KWY) 1 CROSS/BEARING KIT (1-1/8") 1 ROTO WITCH YOKE 1 MOUNT - ROTOWITCH STOW 2 ROUND DOMED TUBE GLIDE 2 FLG LK SCREW (M12-1.75 X 35MM) 2 FLG LK NUT (M12-1.75) 1 FLG LOCKNUT (M8-1.25) 1 QDC COVER (3/8F, PVC, YELLOW) 1 MOTOR, HYDRAULIC - 315CC 1 SNAPPER PIN (3/8" X 2 1/4") 4 FLG LOCKNUT (M10-1.50)

DESCRIPTION

REMARKS

INCLUDES CASTLE NUT, SEE FOOTNOTE 1, 2, & 3

NOT SHOWN:

FOOTNOTES:

1. FOR OLD STYLE HYD MOTOR 155-579, USE SEAL KIT 500-347 FOR MOTOR VERSION 002, 003, 004 & 005.

SEAL KIT 500-658 IS TO BE USED WITH VERSION 006 MOTORS. 2. HYD. MOTOR 150-6055 BEGINS WITH S/N: CMW_______, USE SEAL KIT 500-3733 3. WHEN INSTALLING NUT, USE LOCTITE 242 OR EQUIVALENT AND TORQUE TO 95-100 FT-LB'S. OPTIONAL 1X 105-518 COTTER PIN (.125" X 1.500") CAN BE USED.

NOTE:

THIS PARTS PAGE SUPERSEDES OLD #ID0401893

06

ID0425923

140

TRENCH CLEANER

16 1

11

3 16 18

7 14 9

15

4 19

2

17 7

10 14

15 12 14 13

02

8 6 14

7

5

ID0491810

141

TRENCH CLEANER REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

QTY

DESCRIPTION

302-4506 2 CLEANER MOUNT 105-003 4 FLG LOCKNUT (5/16-NC) 302-0904 2 CRUMBER SPACER 302-4507 1 TRENCH CLEANER BASE 302-4501 1 CLEANER SHOE - 6" 302-4592 1 CLEANER SHOE - 4" 105-1412 14 WASHER (NYLON, .515) 302-4498 1 FRONT LINK 302-4496 1 REAR LINK 302-4505 1 CLEANER SHOE LINK 105-170 4 BOLT (5/16-NC X 3") 302-4548 2 ROLLER 105-2496 1 PIN (.500") 125-1167 9 BRONZE BUSHING 125-430 5 BRONZE BUSHING 105-2634 4 SHLD BLT (1/2" X 2-1/2", 3/8"-NC) 106-095 1 SHLD BLT (1/2" X1-3/4",3/8-NC) 105-814 5 FLG LOCKNUT (3/8-NC) 105-2143 1 SNAPPER PIN (3/8" X 2 1/4")

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1

PRESS BUSHING INTO CORRESPONDING COMPONENT. PRESS BUSHING INTO CORRESPONDING COMPONENT.

NOT SHOWN:

FOOTNOTES:

1. FOR TRENCH CLEANER KIT ORDER 190-1982 TRENCH CLEANER - 4" SHOE (INCLUDES ALL REF#'S EXCEPT REF# 5) OR 190-1983 TRENCH CLEANER 6" SHOE (INCLUDES ALL REF#'S EXCEPT REF# 6)

NOTE:

02

ID0491810

142

TRENCH CLEANER C AND CX SERIES

5

1 4

2 3 6

7 9 8

10

11 12

02

ID0425962

143

TRENCH CLEANER C AND CX SERIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12

2 CRUMBER SLIDE 1 PEDESTRIAN CRUMBER BASE 2 CRUMBER PIN 2 CRUMBER SPACER 4 BOLT (5/16-NC X 2-3/4") 4 FLG LOCKNUT (5/16-NC) 2 CARRIAGE BOLT (1/2-NCX1.00" ZP) 2 NUT(1/2-NC) 2 LOCK WASHER (1/2") 1 CRUMBER DRAG - 3" 1 CRUMBER DRAG - 4" 1 CRUMBER DRAG - 6"

302-0902 302-0899 302-0903 302-0904 105-190 105-003 105-2191 105-021 105-070 302-0900 302-5294 302-0901

DESCRIPTION

REMARKS

19K CHAIN 3"; SEE FOOTNOTE 1 33/35K CHAIN 4"; SEE FOOTNOTE 1 33/35K CHAIN 6"; SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. FOR CRUMBER DRAG KIT ORDER 190-2586 FOR 3" (INCLUDES ALL REF#'S EXCEPT REF#'S 11 & 12), 190-2562 FOR 4" (INCLUDES ALL REF#'S EXCEPT REF#'S 10 & 12), OR 190-2563 FOR 6" (INCLUDES ALL REF#'S EXCEPT REF#'S 10 & 11).

NOTE:

02

ID0425962

144

BOOM ASSEMBLIES 19K (NON-LUBE) 10 9 1

7 8

2 3 4 5 6 13 12

1

7 11

2 3 4 5 6 02

ID0383497

145

BOOM ASSEMBLIES 19K (NON-LUBE) REF PART NO. NUMBER

1 1 1 1 2 3 4 5 6 7 8 9 10 11 12 13

140-1394 140-1384 140-1395 140-1383 140-1418 140-1417 140-1403 140-1402 140-1392 140-1381 125-1125 118-021 302-1838 115-451 105-403 105-2016 105-2036 362-2015 105-1445 105-2065 362-1681

QTY

1 1 1 1

DESCRIPTION

1 1 1 1 1 1 1 1 1 1 1 1

18" BOOM ASM (19K) BOOM (18") 24" BOOM ASM (19K) BOOM (24") 30" BOOM ASM (19K) BOOM (30") 36" BOOM ASM (19K) BOOM (36") ROLLER ASM 19K (NON-LUBE) SPROCKET WELDMENT 19K (NON-LUBE) BALL BEARING (1.575") EXTERNAL SNAP RING (1.500") DUST COVER INTERNAL SNAP RING (3.343") JAM NUT (5/8-NC) BOLT (5/8-NC X 3", GD8) SHORT SPRING (INSERT) UHMW SLEEVE (1.56" X 6.875") BOLT (5/8 NC X 5 FULL THREAD, HHCS) LONG SPRING (INSERT) UHMW SLEEVE (1.56" X 14.75")

-

DANGER RESTRAINT BAR (18") DANGER RESTRAINT BAR (24") DANGER RESTRAINT BAR (30") DANGER RESTRAINT BAR (36")

REMARKS

SEE FOOTNOTE 1; INCLUDES REF NO.'S 8 THRU 10 SEE FOOTNOTE 1; INCLUDES REF NO.'S 11 THRU 13 SEE FOOTNOTE 1; INCLUDES REF NO.'S 11 THRU 13 SEE FOOTNOTE 1; INCLUDES REF NO.'S 11 THRU 13

INCLUDES REF NO.'S 2 THRU 6

METAL PART OF SPRING TO GO AGAINST TENSION BOLT METAL PART OF SPRING TO GO AGAINST TENSION BOLT

NOT SHOWN:

140-1373 140-1374 140-1375 140-1376 FOOTNOTES:

1. REF. #1 IS SPECIFIC TO EACH BOOM ASSEMBLY, REF. #2 THRU #7 ARE COMMON FOR ALL THE ABOVE LISTED BOOM ASSEMBLIES.

NOTE:

1. USE 140-1391 SHORT PIVOT STUB WITH 140-1394 18" BOOM ASM (19K), USE 145-562 PIVOT STUB ( 1 9/16" X 14.75"") FOR ALL OTHERS.

02

ID0383497

146

BOOM ASSEMBLIES 35K (NON-LUBE)

10 9 1

8 7 5

2

6

3 4

03

ID0383547

147

BOOM ASSEMBLIES 35K (NON-LUBE) REF PART NO. NUMBER

1 1 1 1 2 3 4 5 6 7 8 9 10

140-1205 140-1200 140-1206 140-1201 140-1207 140-1202 140-1397 140-1382 140-1424 375-1161 125-1125 118-021 302-1838 115-451 105-1445 105-403 105-2065 362-1681

QTY

REMARKS

DESCRIPTION

- 24" BOOM ASM (35K) 1 24 INCH BOOM WELDMENT - 30" BOOM ASM (35K) 1 30 INCH BOOM WELDMENT - 36" BOOM ASM (35K) 1 36 INCH BOOM WELDMENT - 48" BOOM ASM (35K) 1 48 INCH BOOM WELDMENT ROLLER ASM 35K (NON-LUBE) 1 SPROCKET 35K (NON-LUBE) 1 BALL BEARING (1.575") 1 EXTERNAL SNAP RING (1.500") 1 DUST COVER 1 INTERNAL SNAP RING (3.343") 1 BOLT (5/8 NC X 5 FULL THREAD, HHCS) 1 JAM NUT (5/8-NC) 1 LONG SPRING (INSERT) 1 UHMW SLEEVE (1.56" X 14.75")

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 INCLUDES REF NO.'S 2 THRU 6

SEE FOOTNOTE 2 METAL PART OF SPRING TO GO AGAINST TENSION BOLT

NOT SHOWN:

140-1374 140-1375 140-1376 140-1377

- DANGER RESTRAINT BAR (24") - DANGER RESTRAINT BAR (30") - DANGER RESTRAINT BAR (36") - DANGER RESTRAINT BAR (48")

FOOTNOTES:

1. REF. #1 IS SPECIFIC TO EACH BOOM ASSEMBLY, REF. #2 THRU #10 ARE COMMON FOR ALL THE ABOVE LISTED BOOM ASSEMBLIES. 2. BOLT 105-1445 IS USED WITH BOOM ASSEMBLY 140-1205. USE BOLT 105-2429 WITH BOOM ASSEMBLIES 140-1206, 140-1207, AND 140-1397.

NOTE:

1. USE 145-562 PIVOT STUB ( 1 9/16" X 14.75"") WITH ALL BOOM ASSEMBLIES

03

ID0383547

148

EC KIT

C16X / C24X / C30X

6 5 2

4 3 8 7

9 10 11 1 12

02

ID0406912

149

EC KIT

C16X / C24X / C30X REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12

2 SCREW (M4-0.70 X 12MM, SOC) 1 LOCK - MANUAL COMPARTMENT 1 SCREW (M8-1.25 X 30MM) 1 WASHER (5/16") 1 WASHER (M8) 1 NUT (M8-1.25) 1 LOCK - STOP 2 FLG LK SCREW (M8-1.25 X 25MM) 2 FLG LOCKNUT (M8-1.25) 1 FUEL FILL COVER 1 DRAW LATCH- W/LOCK 2 M4-.70 MM NYLON INSERT NUT

106-715 302-2414 106-327 108-111 106-395 106-078 302-2413 106-381 106-386 302-0473 105-2023 106-956

DESCRIPTION

REMARKS

SUNBELT GREEN PART #333-1014

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0406912

150

EC KIT C12X

8 5

3 1 7

4

2

6

01

ID0473468

151

EC KIT C12X

REF PART NO. NUMBER

QTY

1 302-4663 2 302-2414 3 108-111 4 106-327 5 106-395 6 106-381 7 106-386 8 106-078

1 LOCK - STOP (CX - NO TOWER) 1 LOCK - MANUAL COMPARTMENT 1 WASHER (5/16") 1 SCREW (M8-1.25 X 30MM) 1 WASHER (M8) 2 FLG LK SCREW (M8-1.25 X 25MM) 2 FLG LOCKNUT (M8-1.25) 1 NUT (M8-1.25)

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0473468

152

ELECTRICAL DIAGRAM

SUNBELT GPS KIT (ZTR M7-LITE) C16X/C24X/C30X

2

1

3 02

ID0593550

153

ELECTRICAL DIAGRAM

SUNBELT GPS KIT (ZTR M7-LITE) C16X/C24X/C30X REF PART NO. NUMBER

QTY

190-2531 1 215-3228 2 215-3248 3 215-2421

SUNBELT GPS KIT (ZTR M7-LITE) 1 TELEMATICS UNITED RENTALS (ZTR M7 LITE) 1 SUNBELT ZTR GPS UNIT MOUNTING HARDWARE 1 ZTR JUMPER HARNESS

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0593550

154

GPS KIT LOCATION C12/C12X

2 1

01

ID0553023

155

GPS KIT LOCATION C12/C12X REF PART NO. NUMBER

QTY

190-2828 1 215-2625 2 110-366

HOME DEPOT ONLY BATTERY POWERED GPS 1 HOME DEPOT RENTAL GPS UNIT 2 VELCRO STRIP (1", SOLD PER IN)

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. MOUNTS TO CENTER OF #302-0289 REAR COVER IN #350-4658 CONTROL TOWER.

NOTE:

01

ID0553023

156

HD GPS LOCATION - BATTERY POWERED C12X

2 1

01

ID0703224

157

HD GPS LOCATION - BATTERY POWERED C12X

REF PART NO. NUMBER

QTY

190-2697 1 215-3331 2 215-3373

HOME DEPOT GPS KIT 1 HOME DEPOT GPS - BATTERY POWERED 1 HOME DEPOT GPS - MAGNETIC MOUNT

DESCRIPTION

REMARKS

INCLUDES REF NO.'S 1 & 2

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0703224

158

AUGER SUPPORT UPDATE KIT

7

1

5

6 2 3

4

01

2

ID0740611

159

AUGER SUPPORT UPDATE KIT REF PART NO. NUMBER

QTY

1 303-4338 2 110-396 3 125-1128 4 105-249 5 106-387 6 106-995 7 105-814

1 AUGER SUPPORT 2 FLANGETTE (3-BOLT, L/ZERK) 1 BALL BEARING - MAINT. FREE (1.25) 3 CARRIAGE BOLT(3/8-NC X 1-1/4") 3 FLG LOCKNUT (M10-1.50) 3 FLG LK SCREW (M10-1.50 X 45MM, NLK) 3 FLG LOCKNUT (3/8-NC, GR F)

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0740611

160

NOTES:

ID0134963

161

MISCELLANEOUS

162

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

163

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

164

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

165

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

166

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which is D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

167

168

Related Publications Component

Ass’y

P/N

Model: C16X, C24X, C30X… Parts Manual ................................................................. ............. 053-2871 C16X, C24X, C30X… Operators Manual ......................................................... ............. 053-2869

Filters Engine (C-16X): Air Filter – Briggs…………………………………………………………………………………195-1794 Air Filter – Briggs (Pre-Cleaner)………………………………………………………………...195-1479 Fuel Filter ……………………………... …………………………………………………………195-1480 Engine (C-24X): Air Filter – ………..……(SECONDARY)………………………………..……………………….194-039 Air Filter – ………..……(PRIMARY)………………………………..……………………………194-038 Oil Filter ………...…………………………………………………………………………………195-1533 Fuel Filter ………...……………………………………………………………………………….195-1536 Engine (C-30X): Air Filter –………………(SECONDARY)………………………………..………………………194-039 Air Filter – ………..……(PRIMARY)………………………………..……………………………194-038 Oil Filter ………..………………………………………………………………………………….500-2093 Fuel Filter ………...………………………………………………………………………………195-1480 Hydraulic: Oil Filter Element (spin-on) ............................................................................................. 150-4388

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ............................................ 190-051 O-ring Repair Kit - Field Service (46 different O-rings) .................................................... 190-052

169

ID0040564

170

ID0135281