Ditch Witch 1TRH/1TRI Parts Manual 053-2069 - PDF DOWNLOAD

1TRH/1TRI Parts Manual Issue: 04PL-1/18 Part Number 053-2069 For replacement copy, contact your Ditch Witch dealer.

Copyright 2010, 2012, 2016, 2018 by The Charles Machine Works, Inc.

, Ditch Witch, CMW, and Roto Witch are registered trademarks of The Charles Machine Works, Inc.

DECAL LOCATION 1TRH / 1TRI

4 1 3

.50”

1

2

05

ID0190156

DECAL LOCATION 1TRH / 1TRI REF PART NO. NUMBER

270-1951 1 275-097 2 270-1984 3 274-442 4 270-6773

QTY

DESCRIPTION

2 1 1 1

DECAL KIT - 1TRH / 1TRI DANGER CHAIN & AUGER DECAL DEPTH GAUGE LIFT LOCATION PATENT

REMARKS

FOOTNOTES:

05

ID0190156

TRAIL WHEEL 1TRH, 1TRI

4

3

1

2

01

ID0170012

TRAIL WHEEL 1TRH, 1TRI REF PART NO. NUMBER

1 2 3 4

205-496 300-3451 105-826 105-834

QTY

1 1 1 1

DESCRIPTION

REMARKS

TIRE & WHEEL ASSY 16 x 6.50-8, URETHANE TRAIL WHEEL PIN FLG LK BOLT (3/8-NC X 1") FLG LOCKNUT (3/8-NC)

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0170012

DUAL TRAIL WHEEL 1TRH, 1TRI

4 3

1

6 2 5

01

ID0171487

DUAL TRAIL WHEEL 1TRH, 1TRI REF PART NO. NUMBER

QTY

1 2 3 4 5 6

2 1 2 2 1 1

205-496 300-3619 115-483 105-444 105-834 105-826

DESCRIPTION

REMARKS

TIRE & WHEEL ASSY 16 x 6.50-8, URETHANE DUAL TRAIL WHEEL PIN KLIP RING (1.250") WASHER (1-1/4") FLG LOCKNUT (3/8-NC) FLG LK BOLT (3/8-NC X 1")

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0171487

LUBE HOSE 1TRH, 1TRI

2 3 4

1

01

ID0183827

LUBE HOSE 1TRH, 1TRI REF PART NO. NUMBER

QTY

DESCRIPTION

1 300-3406 2 116-258 3 105-283 4 115-003

1 2 2 2

TRENCHER FRAME LUBE HOSE LOCKNUT (02NF) ZERK (1/4-NF, STR)

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0183827

TRENCHER FRAME 1TRH, 1TRI

1 9 10

6

8 10

7 9

5

2

3

4 01

ID0171494

TRENCHER FRAME 1TRH, 1TRI REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10

1 1 1 4 4 4 1 1 2 2

300-3406 300-6601 300-6602 105-834 105-337 105-827 105-994 300-6598 105-137 105-873

DESCRIPTION

REMARKS

TRENCHER FRAME SPOILS FLAP CLAMP BAR FLG LOCKNUT (3/8-NC) FLANGE BOLT (5/8-NC X 2") FLG LK BOLT (3/8-NC X 1-1/4") FLG LOCKNUT (5/8-NC) COVER CLIP NUT (5/16-NC) FLG LK BOLT (5/16-NC X 1")

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0171494

BEARING PIVOT - 1TRH

BEGINS WITH S/N: CMW1TRHXEA0000394

3 6

2 5 7

4 13

1 11

12

14 8 04

10

9

16

15 ID0237605

BEARING PIVOT - 1TRH

BEGINS WITH S/N: CMW1TRHXEA0000394 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

300-3441 300-3449 300-3450 362-1098 115-499 110-815 300-7485 107-167 106-743 105-065 105-834 105-871 105-833 300-9124 107-368 142-109

QTY

1 1 1 1 2 1 1 6 4 4 2 2 2 6 6 1

DESCRIPTION

BOOM BEARING PLATE TRENCH DEPTH LOCATOR LOCATOR MOUNT WEAR STRIP KLIP RING (1.000") T-BOLT CLAMP (2.5") PIVOT ASSEMBLY BOLT (7/16-NC X 2.5", GD 8) WASHER (.531", HARDENED) LOCKNUT (1/2-NC) FLG LOCKNUT (3/8-NC) BOLT (1/2-NC X 2" GD8) FLG LOCKNUT (1/2-NC) BUSHING WASHER (3/8" HARDENED) HEADSHAFT SPROCKET HALF

REMARKS

SEE FOOTNOTES 1 & 2

INCLUDES 2 HALVES

NOT SHOWN:

301-1871

SPROCKET 10T (1.686 2.160 ID)

OPTIONAL SPROCKET FOR SANDY SOIL

FOOTNOTES:

1. USE LOCTITE 242 OR EQUIVALENT 2. TORQUE TO 85 FT*LBS

NOTE:

ITEMS 1 & 9-16 ARE INCLUDED IN 1TRH HEADSHAFT KIT 190-1491.

04

ID0237605

BEARING PIVOT - 1TRI

BEGINS WITH S/N: CMW1TRIXVA0000319

7

4

3 6

13

5 1

10

9

11

12 8

14

2

04

ID0240535

BEARING PIVOT - 1TRI

BEGINS WITH S/N: CMW1TRIXVA0000319 REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

300-3441 105-1446 300-3449 300-3450 362-1098 115-499 110-815 300-7485 106-743 105-065 105-834 105-871 105-833 142-109

QTY

1 6 1 1 1 2 1 1 4 4 2 2 2 1

DESCRIPTION

BOOM BEARING PLATE BOLT (7/16-NC X 1.75", GD 8) TRENCH DEPTH LOCATOR LOCATOR MOUNT WEAR STRIP KLIP RING (1.000") T-BOLT CLAMP (2.5") PIVOT ASSEMBLY WASHER (.531", HARDENED) LOCKNUT (1/2-NC) FLG LOCKNUT (3/8-NC) BOLT (1/2-NC X 2" GD8) FLG LOCKNUT (1/2-NC) HEADSHAFT SPROCKET HALF

REMARKS

SEE FOOTNOTES 1 & 2

INCLUDES 2 HALVES

NOT SHOWN:

301-1871

SPROCKET 10T (1.686 2.160 ID)

OPTIONAL SPROCKET FOR SANDY SOIL

FOOTNOTES:

1. USE LOCTITE 242 OR EQUIVALENT 2. TORQUE TO 85 FT*LBS

NOTE:

ITEMS 1 & 9-14 ARE INCLUDED IN 1TRI HEADSHAFT KIT 190-1509.

04

ID0240535

PIVOT

1TRH, 1TRI BEGINS WITH S/N

10

9

8

12

11 10

6

7

4 2 1 1

3

02

5

ID0204466

PIVOT

1TRH, 1TRI BEGINS WITH S/N REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12

2 1 2 1 1 1 1 1 1 2 1 1

106-197 300-3386 105-075 300-3441 105-834 362-1098 105-833 300-3450 300-3449 115-499 110-815 300-7485

DESCRIPTION

BOLT (1/2-NC X 2-1/2", GD8)) BOOM PIVOT RETAINER BOLT (3/8-NC X 2") BOOM BEARING PLATE FLG LOCKNUT (3/8-NC) WEAR STRIP FLG LOCKNUT (1/2-NC) LOCATOR MOUNT TRENCH DEPTH LOCATOR KLIP RING (1.000") T-BOLT CLAMP (2.5") PIVOT ASSEMBLY

REMARKS

SEE FOOTNOTE 1

BEGINS WITH S/N

NOT SHOWN:

FOOTNOTES:

1- MOUNT TABS FLUSH WITH BOTTOM OF CYLINDER, REAR TAB SHOULD BE ALIGNED WITH THE CENTER OF LOCK RING SLOT.

NOTE:

02

ID0204466

PIVOT

1TRH, 1TRI ENDS WITH S/N

10 8 9 11 12

10

7

6 4 2 1

1

02

3

5

ID0171497

PIVOT

1TRH, 1TRI ENDS WITH S/N REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12

2 1 2 1 1 1 1 1 1 2 1 1

106-197 300-3386 105-075 300-3441 105-834 362-1098 105-833 300-3450 300-3449 115-499 110-815 300-3269

DESCRIPTION

BOLT (1/2-NC X 2-1/2", GD8)) BOOM PIVOT RETAINER BOLT (3/8-NC X 2") BOOM BEARING PLATE FLG LOCKNUT (3/8-NC) WEAR STRIP FLG LOCKNUT (1/2-NC) LOCATOR MOUNT TRENCH DEPTH LOCATOR KLIP RING (1.000") T-BOLT CLAMP (2.5") TC PIVOT ASSEMBLY

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1- MOUNT TABS FLUSH WITH BOTTOM OF CYLINDER, REAR TAB SHOULD BE ALIGNED WITH THE CENTER OF LOCK RING SLOT.

NOTE:

02

ID0171497

BEARING CHAIN DRIVE - 1TRH, 1TRI

11

BEGINS WITH S/N: CMW1TRHXEA0000394 BEGINS WITH S/N: CMW1TRIXVA0000391

2

1 3

13 14

10

12

4

5 6 7 9

04

8

ID0237568

BEARING CHAIN DRIVE - 1TRH, 1TRI BEGINS WITH S/N: CMW1TRHXEA0000394 BEGINS WITH S/N: CMW1TRIXVA0000391 REF PART NO. NUMBER

QTY

1 300-3386 2 158-929 3 300-9300 4 125-040 5 125-049 6 155-898 7 160-1187 8 105-879 9 107-244 10 115-005 11 106-204 12 500-003 13 106-211 14 105-278

1 1 1 1 1 1 1 1 1 1 2 2 4 4

DESCRIPTION

BOOM PIVOT RETAINER HYDRAULIC MOTOR BEARING HOUSING BALL BEARING (1.968") BALL BEARING INTERNAL SEAL (4.008") SPROCKET DRIVE HUB WASHER (3/8") FLG LK BOLT (3/8-NC X 1") ZERK (1/4-NF, 90) BOLT (1/2 - NC X 1.50", SOC) BOLT (3/8-NC X 2-3/4") WASHER (.531") BOLT (1/2-NC X 3-1/2", SOC)

REMARKS

SEE FOOTNOTES 1, 2, 3, & 4

USE LOCTITE 242 OR EQUIVALENT

NOT SHOWN:

FOOTNOTES:

1. APPLY COUPLING GREASE 256-648 TO MOTOR SPLINES 2. HYDRAULIC MOTOR OPTIONS: 157-930 (8.0 CID), 158-929 (9.65 CID), 155-581 (11.9 CID), & 155-582 (14.9 CID) 3. SEAL REPAIR KIT 500-658 4. 500-1653 SHAFT & BEARING KIT

NOTE:

ITEMS 3 - 14 ARE INCLUDED IN BOTH HEADSHAFT KIT 190-1491 & 190-1509.

04

ID0237568

CHAIN DRIVE SPROCKET 1TRI

3

2

1

4 8

3

2

4 5

9

7

10 6

07

ID0171643

CHAIN DRIVE SPROCKET 1TRI

REF PART NO. NUMBER

QTY

1 159-700 2 105-065 3 106-743 4 105-136 5 184-659 6 105-068 7 300-6814 8 105-518 9 110-171 10 142-109

1 4 4 4 1 6 1 1 1 1

DESCRIPTION

HYD MOTOR (9.8 IN3) LOCKNUT (1/2-NC) WASHER (.531", HARDENED) BOLT (1/2-NC X 3-1/2", GD8) SPROCKET DRIVE HUB BOLT (7/16-NC X 2") SHIM COTTER PIN (.125 X 1.500) MACHINERY BUSHING HEADSHAFT SPROCKET HALF

REMARKS

SEE FOOTNOTE 2, SEAL KIT 191-481 TORQUE TO 75 FT/LBS TORQUE TO 85 FT/LBS, SEE FOOTNOTE 1 SEE FOOTNOTE 3

SEE FOOTNOTE 3

NOT SHOWN:

301-1871 150-1336 150-1337 150-2195 300-4474 502-176

SPROCKET 10T (1.686 2.160 ID) HYDRAULIC MOTOR (11.9 IN3) HYDRAULIC MOTOR (14.9 IN3) HYDRAULIC MOTOR (8.0 IN3) HUB PULLER SHAFT AND BEARING ASS'Y

OPTIONAL SPROCKET FOR SANDY SOIL SEE FOOTNOTE 2, SEAL KIT 500-1428; SHAFT & BEARING KIT 500-2399 SEE FOOTNOTE 2, SEAL KIT 500-1428; SHAFT & BEARING KIT 500-2399 SEE FOOTNOTE 2, SEAL KIT 500-1428 TOOL USED TO REMOVE HUB FROM TAPERED SHAFT MOTOR. SERVICE PART FOR 159-700 HYD MOTOR

FOOTNOTES:

1 - USE LOCTITE 242 OR EQUIVALENT 2- CHAIN MOTOR OPTIONS; 159-700 9.8 IN3 "H" (-0055), 150-1336 11.9 IN3 "M" (-1272), 150-1337 14.9 IN3 "L" (-1229), 150-2195 8.0 IN3 "XH" (-1530) 3- USED WITH MOTOR OPTION 159-700

NOTE:

07

ID0171643

CHAIN DRIVE SPROCKET 1TRH

2 5

4 3 9 8 1 6

10

7

09

ID0204427

CHAIN DRIVE SPROCKET 1TRH

REF PART NO. NUMBER

QTY

1 300-6814 2 159-700 3 106-743 4 105-065 5 105-136 6 106-396 7 106-804 8 300-7405 9 300-6818 10 142-109

1 1 4 3 4 6 6 1 1 1

DESCRIPTION

REMARKS

SHIM HYD MOTOR (9.8 IN3) WASHER (.531", HARDENED) LOCKNUT (1/2-NC) BOLT (1/2-NC X 3-1/2", GD8) WASHER (M10, HARDENED) SCREW (7/16-NC X 2", SOC, GD8) SPROCKET SHAFT SPROCKET DRIVE HUB HEADSHAFT SPROCKET HALF

SEE FOOTNOTE 3 SEE FOOTNOTE 2 , SEAL KIT #191-481

SPROCKET 10T (1.686 2.160 ID) HYDRAULIC MOTOR (11.9 IN3) HYDRAULIC MOTOR (14.9 IN3) HYDRAULIC MOTOR (8.0 IN3) HUB PULLER SHAFT AND BEARING ASS'Y

OPTIONAL SPROCKET FOR SANDY SOIL SEE FOOTNOTE 2, SEAL KIT 500-1428; SHAFT & BEARING KIT 500-2399 SEE FOOTNOTE 2, SEAL KIT 500-1428; SHAFT & BEARING KIT 500-2399 SEE FOOTNOTE 2, SEAL KIT 500-1428 TOOL USED TO REMOVE HUB FROM TAPERED SHAFT MOTOR. SERVICE PART FOR 159-700 HYD MOTOR

TORQUE TO 75 FT/LBS TORQUE TO 85 FT/LBS, SEE FOOTNOTE 1

INCLUDES 2 HALVES

NOT SHOWN:

301-1871 150-1336 150-1337 150-2195 300-4474 502-176 FOOTNOTES:

1- USE LOCTITE 242 OR EQUIVALENT 2- CHAIN MOTOR OPTIONS; 159-700 9.8 IN3 "H" (-0055), 150-1336 11.9 IN3 "M" (-1272), 150-1337 14.9 IN3 "L" (-1229), 150-2195 8.0 IN3 "XH" (-1530) 3- USE WITH MOTOR OPTION 159-700.

NOTE:

09

ID0204427

HEADSHAFT AUGER BEARING DRIVE BEGINS WITH S/N: CMW1TRHXEA0000394

3 6

2

5 4

03

7

1

ID0237690

HEADSHAFT AUGER BEARING DRIVE BEGINS WITH S/N: CMW1TRHXEA0000394 REF PART NO. NUMBER

QTY

1 125-623 2 105-830 3 105-833 4 105-047 5 106-004 6 300-4673 7 140-1182

1 2 2 2 3 1 1

DESCRIPTION

REMARKS

FLANGE BEARING (1.375") FLG LK BOLT (1/2-NC X 1-1/4") FLG LOCKNUT (1/2-NC) LOCKNUT (3/8-NC) BOLT (3/8-NC X 1-3/8", GD8) BEARING MOUNT AUGER

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0237690

HEADSHAFT AUGER 1TRH

5 9 3

11

2

6

10 8 4

1

7

04

ID0171518

HEADSHAFT AUGER 1TRH

REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11

300-3455 105-830 300-3458 300-4673 105-833 125-623 105-047 106-004 105-065 105-076 300-7405

QTY

1 2 1 1 2 1 3 3 1 1 1

DESCRIPTION

AUGER FLG LK BOLT (1/2-NC X 1-1/4") AUGER DRIVE HUB BEARING MOUNT FLG LOCKNUT (1/2-NC) FLANGE BEARING (1.375") LOCKNUT (3/8-NC) BOLT (3/8-NC X 1-3/8", GD8) LOCKNUT (1/2-NC) BOLT (1/2-NC X 3") SPROCKET SHAFT

REMARKS

ENDS WITH S/N

BEGINS WITH S/N

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0171518

LIFT HYDRAULICS 1TRH, 1TRI

17

15 16

9

8

11

15

14

11

7 14

2

8

9

1

12

6

21

4 19 20

20 8

3

5

22 18 20

2

13

10

03

ID0171576

LIFT HYDRAULICS 1TRH, 1TRI REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

1 HARDLINE (-06) 2 CONNECTOR (04S-06O90) 1 UNION (06S-06OFX90) 1 CONNECTOR (06S-06O90) 1 HYD LOCKOUT VALVE 1 CONNECTOR (04O-06S, ORF) 1 ROD PIN 2 HOSE (04OFX45-36"-3000) 2 CABLE TIE, GREEN (3/16" W X 15" LONG) 1 CYL (2.0 X 1.0 X 8.0) 2 KLIP RING (1.250") 1 COMPOSITION BUSHING (1.25") 1 BRONZE BUSHING 2 ABRASION SLEEVE (1.00" X 34") 2 PLUG (04O) 9 ABRASION SLEEVE (HIGH HEAT -42) 1 CABLE TIE (1/16" TO 4") 1 QDC BODY (06-06SF) 1 QDC ADAPTER (06-06SF) 3 CONNECTOR (04O-06S) 1 QDC COVER (1/4M, PVC, GREEN) 1 QDC COVER (1/4F, PVC, GREEN)

150-1603 514-049 154-343 154-342 149-136 154-385 183-242 515-020 105-1202 151-031 115-483 125-771 125-412 117-412 154-297 117-1020 110-030 150-1867 150-1868 154-220 150-3043 150-3044

DESCRIPTION

REMARKS

SEE FOOTNOTE 3 SEE FOOTNOTE 2 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1- QUICK DISCONNECT KIT 190-1233 (REF #'S 18-20, NOT USED WITH THE R150 2- SLIDE OVER EXISTING SLEEVES AS FAR AS POSSIBLE INTO THE FRAME AREA, ZIP TIE IN PLACE. 3- PLUGS TO BE DISCARDED WHEN ATTACHMENT IS INSTALLED.

NOTE:

REFER TO O-RING CHART 800-301 IN THE BACK OF THE BOOK FOR O-RING REPLACEMENT

03

ID0171576

MOTOR HYDRAULICS - 1TRH

BEGINS WITH S/N: CMW1TRHXEA0000394

1

6

7 2

3

8

4 12

5

10

9

11

02

ID0240707

MOTOR HYDRAULICS - 1TRH

BEGINS WITH S/N: CMW1TRHXEA0000394 REF PART NO. NUMBER

QTY

1 154-331 2 117-214 3 150-1865 4 150-1866 5 154-233 6 150-3047 7 150-3048 8 105-1203 9 154-279 10 154-322 11 158-929 12 150-1635

2 2 1 1 2 1 1 2 1 1 1 2

DESCRIPTION

PLUG (08O) ABRASION SLEEVE (1.25" X 40") QDC BODY (08-08SF) QDC ADAPTER (08-08SF) CONNECTOR (08S-08O) QDC COVER (3/8M, PVC, YELLOW) QDC COVER (3/8F, PVC, YELLOW) CABLE TIE, YELLOW (3/16" W X 15" LONG) CONNECTOR (08O-10S) CONNECTOR (08O-10S90) HYDRAULIC MOTOR HOSE (08OFX45-47"-4000)

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2

SEAL KIT 500-658, SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1. PLUGS ARE TO BE DISCARDED WHEN ATTACHMENT IS INSTALLED 2. NOT USED WITH THE R150 3. HYDRAULIC MOTOR OPTIONS: 157-930 (8.0 CID), 158-929 (9.65 CID), 155-581 (11.9 CID), & 155-582 (14.9 CID)

NOTE:

REFER TO O-RING CHART 800-301 IN THE BACK OF THE BOOK FOR O-RING REPLACEMENT

02

ID0240707

MOTOR HYDRAULICS - 1TRI

BEGINS WITH S/N: CMW1TRIXVA0000319

9

3

10

7

13

4 6

5 13

8

2

12

AUGER MOTOR

1 CHAIN MOTOR

11 02

ID0240709

MOTOR HYDRAULICS - 1TRI

BEGINS WITH S/N: CMW1TRIXVA0000319 REF PART NO. NUMBER

QTY

1 158-824 2 154-279 3 154-331 4 117-214 5 105-1203 6 150-1865 7 150-1866 8 154-233 9 150-3047 10 150-3048 11 158-929 12 154-942 13 150-1635

1 4 2 2 2 1 1 2 1 1 1 1 2

DESCRIPTION

HYDRAULIC MOTOR CONNECTOR (08O-10S) PLUG (08O) ABRASION SLEEVE (1.25" X 40") CABLE TIE, YELLOW (3/16" W X 15" LONG) QDC BODY (08-08SF) QDC ADAPTER (08-08SF) CONNECTOR (08S-08O) QDC COVER (3/8M, PVC, YELLOW) QDC COVER (3/8F, PVC, YELLOW) HYDRAULIC MOTOR HOSE (08OFX90S-13"-3000) HOSE (08OFX45-47"-4000)

REMARKS

SEAL KIT 500-1428 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEAL KIT 500-658, SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1. PLUGS ARE TO BE DISCARDED WHEN ATTACHMENT IS INSTALLED 2. NOT USED WITH THE R150 3. HYDRAULIC MOTOR OPTIONS: 157-930 (8.0 CID), 158-929 (9.8 CID), 155-581 (11.9 CID), 155-582 (14.9 CID)

NOTE:

REFER TO O-RING CHART 800-301 IN THE BACK OF THE BOOK FOR O-RING REPLACEMENT

02

ID0240709

MOTOR HYDRAULICS

13 10 8

11 4 7

11

6 12 9

7 8 6

4 3 5

2

3

3 OTO M ER G U A

R

1 OTO M IN C HA

04

3

R

ID0171622

MOTOR HYDRAULICS REF PART NO. NUMBER

QTY

1 159-700 2 158-824 3 154-279 4 150-1635 5 154-942 6 117-214 7 105-1203 8 154-233 9 150-1865 10 150-1866 11 154-331 12 150-3048 13 150-3047

1 1 4 2 1 2 2 2 1 1 2 1 1

DESCRIPTION

HYD MOTOR (9.8 IN3) HYDRAULIC MOTOR CONNECTOR (08O-10S) HOSE (08OFX45-47"-4000) HOSE (08OFX90S-13"-3000) ABRASION SLEEVE (1.25" X 40") CABLE TIE, YELLOW (3/16" W X 15" LONG) CONNECTOR (08S-08O) QDC BODY (08-08SF) QDC ADAPTER (08-08SF) PLUG (08O) QDC COVER (3/8F, PVC, YELLOW) QDC COVER (3/8M, PVC, YELLOW)

REMARKS

SEAL KIT 191-481, SEE FOOTNOTE 3 SEAL KIT 500-1428 SEE FOOTNOTE 2 SEE FOOTNOTE 1 SEE FOOTNOTE 4 SEE FOOTNOTE 4 SEE FOOTNOTE 4 SEE FOOTNOTE 5

NOT SHOWN:

502-176

SHAFT AND BEARING ASS'Y

SERVICE PART FOR 159-700 HYD MOTOR

FOOTNOTES:

1 - USED ONLY WITH THE LOWER AUGER OPTION 190-1157 2 - MOUNTS TO THE RETURN PORT OF THE CHAIN MOTOR WHEN THE HEADSHAFT AUGER OPTION IS SELECTED. 3 - CHAIN MOTOR OPTIONS 150-1336 (11.9 CU/IN), 150-1337 (14.93 CU/IN), 150-2195 (8.0 CU/IN), SEAL KIT 500-1428 4 - NOT USED WITH THE R150 5- PLUGS TO BE DISCARDED WHEN ATTACHMENT IS INSTALLED

NOTE:

REFER TO O-RING CHART 800-301 IN THE BACK OF THE BOOK FOR O-RING REPLACEMENT

04

ID0171622

HYDRAULIC CYLINDERS (2.0" X 1.0")

1

6 11

13

12 5

7

4 8

9 3 10 2

04

ID0015823

HYDRAULIC CYLINDERS (2.0" X 1.0") REF PART NO. NUMBER

QTY

DESCRIPTION

1 2

151-094 152-029 153-007 149-667 149-761 149-728 151-027 150-282 150-414 151-038 150-290 150-421 151-039 150-291 150-422 151-044 150-294 150-424 151-031 150-285 150-417 151-076 152-017 150-444 149-668 150-286 149-729

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

CYL (2.0 X 1.0 X 2.0) CYLINDER BARREL (2.0 X 2.0) CYLINDER ROD (1.00 X 2.0) CYL (2.0 X 1.0 X 2.5) CYLINDER BARREL (2.0 X 2.5) CYLINDER ROD (1.00 X 2.5) CYL (2.0 X 1.0 X 3.0) CYLINDER BARREL (2.0 X 3.0) CYLINDER ROD (1.00 X 3.0) CYL (2.0 X 1.0 X 4.0) CYLINDER BARREL (2.0 X 4.0) CYLINDER ROD (1.00 X 4.0) CYL (2.0 X 1.0 X 5.0) CYLINDER BARREL (2.0 X 5.0) CYLINDER ROD (1.00 X 5.0) CYL (2.0 X 1.0 X 6.0) CYLINDER BARREL (2.0 X 6.0) CYLINDER ROD (1.00 X 6.0) CYL (2.0 X 1.0 X 8.0) CYLINDER BARREL (2.0 X 8.0) CYLINDER ROD (1.00 X 8.0) CYL (2.0 X 1.0 X 10.0) CYLINDER BARREL (2.0 X 10.0) CYLINDER ROD (1.00 X 10.0) CYL (2.0 X 1.0 X 12.0) CYLINDER BARREL (2.0 X 12.0) CYLINDER ROD (1.00 X 12.0)

3 4 5 6 7 8 9 10 11 12 13

150-772 150-778 150-775 106-096 157-022 155-732 157-540 157-537 125-774 157-534 157-018

1 1 1 1 1 1 1 1 1 1 1

CYLINDER HEAD (2.0 X 1.00) LOCK RING (2.0) CYLINDER PISTON (2.0 X 1.00) FLG BOLT (1/2-NC X 1-3/4",GD8) O-RING (224 D90) BACKUP RING (224 D90) U-SEAL (1.000") WIPER SEAL (1.000") WEAR RING BACKUP RING (131 D90) O-RING (131 D90)

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

REMARKS

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

SEE FOOTNOTES 1 & 2

.

SEE FOOTNOTE 3

NOT SHOWN:

259-100 259-235 259-239 259-241 259-188

U-SEAL INSTALLER (1" - 1.499") 1.00 ROD WIPER TOOL WIPER/SEAL INSTALLER (2") PISTON INSTALLER (2") CYL HEAD SPANNER - TWO PIN

FOOTNOTES:

1. REF. #1 & #2 ARE SPECIFIC TO EACH CYLINDER, REF. #3 THRU #13 ARE COMMON FOR ALL THE ABOVE LISTED CYLINDERS 2. SEAL REPAIR KIT P/N: 190-165 3. APPLY LOCTITE 277 OR EQUIVALENT, TORQUE TO 90-100 FT-LBS

NOTE:

04

ID0015823

BACKFILL BLADE

2 2

01

1

ID0172198

BACKFILL BLADE REF PART NO. NUMBER

QTY

1 2

1 BACKFILL BLADE 2 PULL PIN (5/16" x 3-1/4")

300-3710 105-1166

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0172198

SK ADAPTER

6

10

11

7 2

8 12

4 3 5

8

9

2 1

6 7

4 10 11 5

3

9

02

ID0185807

SK ADAPTER REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12

300-3564 300-5003 179-651 118-424 105-510 300-3468 105-827 105-814 178-419 107-336 181-974 300-4610

QTY

1 2 2 2 2 2 2 2 2 2 2 1

DESCRIPTION

ATTACHMENT PLATE LOCK PIN LOCK PIN BUSHING COMPRESSION SPRING ROLL PIN (1/4" X 1-1/2") TAB PIN (1.25 X 6.38) FLG LK BOLT (3/8-NC X 1-1/4") FLG LOCKNUT (3/8-NC) TAPERED PIN (38.1MM X 208MM) FLG SCREW (M16-2.00X45MM,10.9) TAPERED INSERT (1.5") SK RECEIVER PLATE

REMARKS

NOT FOR USE WITH TRENCHER. ORDER 302-1483 WHEN USING TRENCHER

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0185807

TRENCH CLEANER 1TRH, 1TRI

10

7

12

13

14

9

15

8 4 2 11

3 6

5

1

05

ID0178242

TRENCH CLEANER 1TRH, 1TRI REF PART NO. NUMBER

QTY

100-180 300-7485 300-4647 105-833 105-300 141-288 141-289 141-287 105-279 141-134 320-425 105-065 107-262 116-709 141-318 105-121

1 1 1 2 2 2 1 2 1 1 6 4 2 1 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

DESCRIPTION

MECHANICAL CLEANER CONVERSION KIT PIVOT ASSEMBLY CLEANER BAR FLG LOCKNUT (1/2-NC) BOLT (1/2 NC X 3-1/4") FRONT LINK REAR LINK SHOE BEAM CARRIAGE BOLT (1/2-NCX3.00") CLEANER SHOE (6") GRAB HANDLE LOCKNUT (1/2-NC) LK BOLT (1/2-NC X 3-1/2",GD8) EXTENSION SPRING RESTRAINT BAR BOLT (1/2-NC X 1")

REMARKS

INCL. REF #'S 5-8 & 10-13 SEE FOOTNOTE 2 SEE FOOTNOTE 4 SEE FOOTNOTE 4

SEE FOOTNOTE 1

SEE FOOTNOTE 3 SEE FOOTNOTE 5

NOT SHOWN:

FOOTNOTES:

1 - CLEANER SHOE OPTIONS 4" 141-290, 6" 141-134, 8" 141-135 2 - CLEANER BAR OPTIONS 24" 300-4647, 30" 300-4649, 36" 300-4651, 48" 300-4653 3 - RESTRAINT BAR OPTIONS 24" DEPTH 141-318, 30" DEPTH 141-337, 36" DEPTH 141-337, 48" DEPTH 141-755 4 - USE WITH PIVOT ASSEMBLY 300-7485 5 - USE WITH PIVOT ASSEMBLY 300-3269

NOTE:

05

ID0178242

TRENCH CLEANER 1TR4, SK4TR

1 1

8 2

9 7 3

7 5

3

11

4 4 4

1 4 6

5 1 1

6

10

1

02

ID0178206

TRENCH CLEANER 1TR4, SK4TR REF PART NO. NUMBER

QTY

100-180 1 105-065 2 141-287 3 116-709 4 107-262 5 141-289 6 141-288 7 105-279 8 320-425 9 141-290 10 300-4651 11 141-337

6 1 2 4 2 2 2 1 1 1 1

DESCRIPTION

MECHANICAL CLEANER CONVERSION KIT LOCKNUT (1/2-NC) SHOE BEAM EXTENSION SPRING LK BOLT (1/2-NC X 3-1/2",GD8) REAR LINK FRONT LINK CARRIAGE BOLT (1/2-NCX3.00") GRAB HANDLE CLEANER SHOE (4") CLEANER BAR PERSONEL RESTRAINT BAR

REMARKS

INCL. REF #'S 1-8

SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 3

NOT SHOWN:

FOOTNOTES:

1- CLEANER SHOE OPTIONS 4" 141-290, 6" 141-134, 8" 141-135, 10" 141-136, 12" 141-137.

2- CLEANER BAR OPTIONS 24" DEPTH 300-4651, 30" DEPTH 300-4653, 36" DEPTH 300-4653, 48" DEPTH 300-4660.

3 - RESTRAINT BAR OPTIONS 24" DEPTH 141-337, 30" DEPTH 141-755, 36" DEPTH 141-156, 48" DEPTH 141-157

NOTE:

02

ID0178206

SINGLE POINT LIFT

1

2

01

ID0199157

SINGLE POINT LIFT REF PART NO. NUMBER

QTY

190-1265 1 300-5004 2 105-866

- SINGLE POINT LIFT KIT 1 LIFT PLATE 4 FLG LK BOLT (5/16-NC X 1.250")

DESCRIPTION

REMARKS

INCLUDES REF #'S 1 AND 2

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0199157

SHIELD EXTENSION

3

3

2

1

2

01

ID0187568

SHIELD EXTENSION REF PART NO. NUMBER

1 2 3

190-1269 300-4103 105-830 105-833

QTY

DESCRIPTION

REMARKS

SHIELD EXTENSION KIT 1 SHIELD EXTENSION 2 FLG LK BOLT (1/2-NC X 1-1/4") 2 FLG LOCKNUT (1/2-NC)

NOT SHOWN:

FOOTNOTES:

NOTE:

USED WITH THE AUGER EXTENSION KIT 190-1168 ONLY WITH THE 1TRI ATTACHMENT

01

ID0187568

COUNTER WEIGHT 1TRH, 1TRI

3

4 1 2

3

1 2

02

ID0177698

COUNTER WEIGHT 1TRH, 1TRI REF PART NO. NUMBER

1 2 3 4

190-1203 106-949 105-421 105-340 375-1009

QTY

2 2 2 1

DESCRIPTION

COUNTER WEIGHT KIT WASHER (3/4", HARDENED) BOLT (3/4-NC X 3-1/2") FLG LOCKNUT (3/4-NC) WEIGHT (ATC)

REMARKS

INCLUDES REF #'S 1-4

APX WEIGHT = 100#

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0177698

COUNTER WEIGHT

1

2

3

3 2

1 2 3

3

01

2

ID0184327

COUNTER WEIGHT REF PART NO. NUMBER

QTY

1 2 3

2 CAST WEIGHT 4 WASHER (3/4", HARDENED) 4 BOLT (3/4-NC X 4-1/2", GD8)

375-1015 106-949 105-550

DESCRIPTION

REMARKS

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0184327

24" SPLIT BOOM ASSY

5

3

11

4 6

10

12 7

8 22

19

15

23

17 2

1 14

18

18

21

16

13

16

20

17

9 24

18

16

15

17 16

25

18

FOOTNOTE 4 21

FOOTNOTE 3 17 06

23 ID0160966

24" SPLIT BOOM ASSY REF PART NO. NUMBER

QTY

1 140-1158 2 105-136 3 300-2687 4 300-2685 5 105-833 6 105-975 7 105-310 8 106-073 9 106-212 10 300-2686 11 106-301 12 105-357 13 105-076 14 300-2688 15 125-009 16 105-1126 17 105-1125 18 115-464 19 142-755 20 140-1102 21 125-1022 22 105-707 23 115-003 24 140-1298 25 140-1299

2 ABRASION RESISTANT SPLIT BOOM, 24" 4 BOLT (1/2-NC X 3-1/2", GD8) 2 SPACER 1 ADJUSTMENT BLOCK 4 FLG LOCKNUT (1/2-NC) 3 WASHER (3/4") 1 JAM NUT (3/4-NC) 1 BOLT (3/4-NC X 6") 1 BOLT (5/8-NC X 3-1/2") 2 TUBE SPACER 2 LOCKNUT (1/2-NC, NLK) 1 LOCKNUT (5/8-NC) 2 BOLT (1/2-NC X 3") 1 IDLER BLOCK 1 BALL BEARING (W/051-345 INSTR) 2 DIRT SHIELD 2 DIRT SHIELD 2 INTERNAL SNAP RING (3.149") 1 TAIL ROLLER (1.654"C6.8") 1 TAIL ROLLER - RELUBRICABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 SET SCREW (1/4-NF X 3/8", CUP) 1 ZERK (1/4-NF, STR) 1 LOW PROFILE SPROCKET, SEALED 1 LOW PROFILE SPROCKET, GREASABLE

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 4 SEE FOOTNOTE 3

NOT SHOWN:

140-1162 140-1122 140-1101 140-1310

24" SPLIT BOOM ASSY, ROLLER RELUBRICABLE - 24" SPLIT BOOM ASSY, ROLLER 24" SPLIT BOOM ASSY, SPROCKET-GREASEABLE 24" SPLIT BOOM ASSY, SPROCKET-SEALED

INCLUDES REF. #'S 1-19 INCLUDES REF. #'S 1-13, 14, 16, 17, 18 & 20-23.

INCLUDES REF. #'S 1-14, 16-18 21,23 & 25 INCLUDES REF. #'S 1-18 & 24

FOOTNOTES:

1. 142-754 TAIL ROLLER (1.654"C6.8") INCLUDES REF NO.'S, 15-19.

2. 140-1104 TAIL ROLLER RELUBRICABLE INCLUDES REF NO.'S, 16-18, & 20-23.

3. 140-1290 LOW PROFILE SPROCKET ASSY, GREASEABLE - INC'L REF #'S 16, 17, 18, 21 & 23.

4. 140-1289 LOW PROFILE SPROCKET ASSY, SEALED - INC'L REF #'S 15, 16, 17 & 18

NOTE:

06

ID0160966

30" SPLIT BOOM ASSY

5

3 11 4 6

12 7 8

10

16 22 23

15 14 2

17

1 18

13 16

18

21 17

9

24

18

19

20

16

15

17 16

25

18

FOOTNOTE 4

21

17 05

FOOTNOTE 3 23 ID0169774

30" SPLIT BOOM ASSY REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

2 ABRASION RESISTANT SPLIT BOOM, 30" 4 BOLT (1/2-NC X 3-1/2", GD8) 2 SPACER 1 ADJUSTMENT BLOCK 4 FLG LOCKNUT (1/2-NC) 3 WASHER (3/4") 1 JAM NUT (3/4-NC) 1 BOLT (3/4-NC X 6") 1 BOLT (5/8-NC X 3-1/2") 2 TUBE SPACER 2 LOCKNUT (1/2-NC, NLK) 1 LOCKNUT (5/8-NC) 2 BOLT (1/2-NC X 3") 1 IDLER BLOCK 1 BALL BEARING (W/051-345 INSTR) 2 DIRT SHIELD 2 DIRT SHIELD 2 INTERNAL SNAP RING (3.149") 1 TAIL ROLLER (1.654"C6.8") 1 TAIL ROLLER - RELUBRICABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 SET SCREW (1/4-NF X 3/8", CUP) 1 ZERK (1/4-NF, STR) 1 LOW PROFILE SPROCKET, SEALED 1 LOW PROFILE SPROCKET, GREASABLE

140-1161 105-136 300-2687 300-2685 105-833 105-975 105-310 106-073 106-212 300-2686 106-301 105-357 105-076 300-2688 125-009 105-1126 105-1125 115-464 142-755 140-1102 125-1022 105-707 115-003 140-1298 140-1299

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 4

NOT SHOWN:

140-1163 140-1123 140-1100 140-1100

30" SPLIT BOOM ASSY, ROLLER RELUBRICABLE - 30" SPLIT BOOM ASSY, ROLLER 30" SPLIT BOOM ASSY, SPROCKET, GREASEABLE 30" SPLIT BOOM ASSY, SPROCKET, SEALED

INLC'S REF #1-19 INCLUDES REF. #'S 1-13, 14, 16, 17, 18 & 20-23.

INCLUDES REF. #'S 1-14 16-18, 21 ,23 & 25 INCLUDES REF. #'S 1-18 & 24

FOOTNOTES:

1. 142-754 TAIL ROLLER (1.654"C6.8") INCLUDES REF NO.'S 15-19.

2. 140-1104 TAIL ROLLER RELUBRICABLE INCLUDES REF NO.'S 16-18 & 20-23.

3. 140-1290 LOW PROFILE SPROCKET ASSY, GREASEABLE - INC'L REF #'S 16, 17, 18, 21 & 23.

4. 140-1289 LOW PROFILE SPROCKET ASSY, SEALED - INC'L REF #'S 15, 16, 17 & 18

NOTE:

05

ID0169774

36" SPLIT BOOM ASSEMBLY

2 1

13

3 1

4 6

9 7

10

8

10

15

19

5

17 17

18 22 23 11

14 16

14

12 24

18 21

18

17 20 16

16

25

21

15 FOOTNOTE 4

18

16

17

FOOTNOTE 3 23 01

ID0346834

36" SPLIT BOOM ASSEMBLY REF PART NO. NUMBER

QTY

1 140-1329 2 105-136 3 300-2687 4 300-2685 5 105-833 6 105-975 7 105-310 8 106-073 9 106-212 10 300-2686 11 106-301 12 105-357 13 105-076 14 300-2688 15 125-009 16 105-1125 17 105-1126 18 115-464 19 142-755 20 140-1102 21 125-1022 22 105-707 23 115-003 24 140-1298 25 140-1299

2 36" SPLIT BOOM SIDE 4 BOLT (1/2-NC X 3-1/2", GD8) 2 SPACER 1 ADJUSTMENT BLOCK 4 FLG LOCKNUT (1/2-NC) 3 WASHER (3/4") 1 JAM NUT (3/4-NC) 1 BOLT (3/4-NC X 6") 1 BOLT (5/8-NC X 3-1/2") 6 TUBE SPACER 6 LOCKNUT (1/2-NC, NLK) 1 LOCKNUT (5/8-NC) 6 BOLT (1/2-NC X 3") 1 IDLER BLOCK 1 BALL BEARING (W/051-345 INSTR) 1 DIRT SHIELD 1 DIRT SHIELD 1 INTERNAL SNAP RING (3.149") 1 TAIL ROLLER (1.654"C6.8") 1 TAIL ROLLER - RELUBRICABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 SET SCREW (1/4-NF X 3/8", CUP) 1 ZERK (1/4-NF, STR) 1 LOW PROFILE SPROCKET, SEALED 1 LOW PROFILE SPROCKET, GREASABLE

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 4 SEE FOOTNOTE 3

NOT SHOWN:

140-1334 140-1333 140-1328 140-1332

36" SPLIT BOOM ASSY, ROLLER-SEALED 36" SPLIT BOOM ASSY, ROLLER-GREASABLE 36" SPLIT BOOM ASSEMBLY, SPROCKET 36" SPLIT BOOM ASSY, SPROCKET, SEALED

INCLUDES REF. #'S 1-19 INCLUDES REF. #'S 1-13, 14, 16, 17, 18 & 20-23.

INCLUDES REF. #'S 1-14, 16-18 21,23 & 25 INCLUDES REF. #'S 1-18 & 24

FOOTNOTES:

1. 142-754 TAIL ROLLER (1.654"C6.8") INCLUDES REF NO.'S, 15-19.

2. 140-1104 TAIL ROLLER RELUBRICABLE INCLUDES REF NO.'S, 16-18, & 20-23.

3. 140-1290 LOW PROFILE SPROCKET ASSY, GREASEABLE - INC'L REF #'S 16, 17, 18, 21 & 23.

4. 140-1289 LOW PROFILE SPROCKET ASSY, SEALED - INC'L REF #'S 15, 16, 17 & 18

NOTE:

01

ID0346834

GREASE BOOM, ROLLER

12

2

15

9 13

11

3 14

2 5

11

4 12

1

10 6 8 7

06

ID0148266

GREASE BOOM, ROLLER REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

140-1315 115-464 125-009 142-755 105-379 115-024 105-825 319-410 105-707 180-445 105-1125 105-1126 140-1102 125-1022 115-003

QTY

1 2 1 1 1 1 2 1 1 1 2 2 1 1 1

DESCRIPTION

GREASE TENSION BOOM, 24" INTERNAL SNAP RING (3.149") BALL BEARING (W/051-345 INSTR) TAIL ROLLER (1.654"C6.8") LK BOLT (3/4-NC X 1-1/4", NLK) ZERK (02N, 5000) FLG LK BOLT (3/8-NC X 3/4) ZERK COVER SET SCREW (1/4-NF X 3/8", CUP) IDLER SHAFT (1.125"SQ X1.937") DIRT SHIELD DIRT SHIELD TAIL ROLLER - RELUBRICABLE BALL BEARING RELUBRICABLE (1.125", SQ) ZERK (1/4-NF, STR)

REMARKS

140-1316 (30"), 140-1317 (36"), SEE FOOTNOTE 2 EACH ROLLER ASSEMBLY REQUIRES ONE 115-464. - SEE FOOTNOTE 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 3 EACH ROLLER ASSEMBLY REQUIRES ONE 105-1125. - SEE FOOTNOTE 3 EACH ROLLER ASSEMBLY REQURIES ONE 105-1126. - SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

141-794 141-795 141-796 140-1114 140-1115 140-1116

GREASE BOOM ASM (24")-W/STD. ROLLER 142-754 GREASE BOOM ASM (30")-W/STD. ROLLER 142-754 GREASE BOOM ASM (36")-W/STD. ROLLER 142-754 GREASE BOOM ASM (24")-W/RELUBRICABLE ROLLER 140-1104 GREASE BOOM ASM (30")-W/RELUBRICABLE ROLLER 140-1104 GREASE BOOM ASM (36")-W/RELUBRICABLE ROLLER 140-1104

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3

FOOTNOTES:

1. 142-754 TAIL ROLLER ASSEMBLY INCL. REF #'S 2-4, 12 & 11.

2. 141-794 GREASE BOOM ASSEMBLY (24") INCL. REF #'S 1-12.

141-795 GREASE BOOM ASSEMBLY (30") INCL. REF #'S 1-12.

141-796 GREASE BOOM ASSEMBLY (36") INCL. REF #'S 1-12.

140-1114 GREASE BOOM ASSEMBLY (24"), RELUBRICALBLE, INCL. REF #'S 1-2 & 5-16.

140-1115 GREASE BOOM ASSEMBLY (30"), RELUBRICALBLE, INCL. REF #'S 1-2 & 5-16.

140-1116 GREASE BOOM ASSEMBLY (36"), RELUBRICALBLE, INCL. REF #'S 1-2 & 5-16.

3. 140-1104 TAIL ROLLER ASSEMBLY-RELUBRICALBE INCL'S REF #'S 2, 11-16.

NOTE:

06

ID0148266

ROLLER BOOM

2 3

10

17 15

14

3

4 5

6

16

14 10 11 12

2 9 13 7

1

8 8

10

ID0148280

ROLLER BOOM REF PART NO. NUMBER

QTY

1 301-8280 2 105-1126 3 115-464 4 125-009 5 142-755 6 180-445 7 106-033 8 105-136 9 105-379 10 115-003 11 105-668 12 105-833 13 106-034 14 105-1125 15 140-1102 16 125-1022 17 105-707

1 2 2 1 1 1 1 4 1 2 1 4 1 2 1 1 1

DESCRIPTION

ROLLER BOOM (24") DIRT SHIELD INTERNAL SNAP RING (3.149") BALL BEARING (W/051-345 INSTR) TAIL ROLLER (1.654"C6.8") IDLER SHAFT (1.125"SQ X1.937") JAM NUT (1-NC) BOLT (1/2-NC X 3-1/2", GD8) LK BOLT (3/4-NC X 1-1/4", NLK) ZERK (1/4-NF, STR) SET SCREW (1/4-NF X 1/4", CUP) FLG LOCKNUT (1/2-NC) SET SCREW (1-NC X 6", SQ) DIRT SHIELD TAIL ROLLER - RELUBRICABLE BALL BEARING RELUBRICABLE (1.125", SQ) SET SCREW (1/4-NF X 3/8", CUP)

REMARKS

301-8211 (30"), 301-8215 (36"), 301-8202 (42"), 301-8238 (42") - F/N 2 EACH ROLLER ASSEMBLY REQUIRES ONE 105-1126 - SEE F/N 1 & 3 EACH ROLLER ASSEMBLY REQUIRES ONE 115-464 - SEE F/N 1 & 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1 FOR QTY= 1

EACH ROLLER ASSEMBLY REQUIRES ONE 105-1125 - SEE F/N 1 & 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

141-792 141-793 141-791 140-1240 140-531 140-1112 140-1113 140-1111 140-1285 140-1106

ROLLER BOOM ASSEMBLY (24") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (30") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (36") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (42") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (48") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (24") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (30") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (36") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (42") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (48") W/RELUBRICABLE ROLLER 140-1104

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 2 &3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3

FOOTNOTES:

1. 142-754 TAIL ROLLER ASSEMBLY, INCL. REF #'S 2-5, 14 2. 141-792 ROLLER BOOM ASSEMBLY (24"), INCL. REF #'S 1-14 141-793 ROLLER BOOM ASSEMBLY (30"), INCL. REF #'S 1-14 141-791 ROLLER BOOM ASSEMBLY (36"), INCL. REF #'S 1-14 140-1240 ROLLER BOOM ASSEMBLY (42"), INCL. REF #'S 1-14 140-531 ROLLER BOOM ASSEMBLY (48"), INCL. REF #'S 1-14 140-1112 ROLLER BOOM ASSEMBLY (24"), INCL. REF #'S 1-3 & 6-17 140-1113 ROLLER BOOM ASSEMBLY (30"), INCL. REF #'S 1-3 & 6-17 140-1111 ROLLER BOOM ASSEMBLY (36"), INCL. REF #'S 1-3 & 6-17 140-1285 ROLLER BOOM ASSEMBLY (42"), INCL. REF #'S 1-3 & 6-17 140-1106 ROLLER BOOM ASSEMBLY (48"), INCL. REF #'S 1-3 & 6-17 3. 140-1104 TAIL ROLLER ASSEMBLY-RELUBRICALBLE INCL'S REF #'S: 2, 3, 10 & 14 THRU 17.

NOTE:

10

ID0148280

LOW PROFILE SPROCKET BOOM

3

2

16

15

14 4 6 3

14 10

10 5

12

2

9 13 7 1 8

01

11

ID0336937

LOW PROFILE SPROCKET BOOM REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 ROLLER BOOM (24") 2 DIRT SHIELD 2 INTERNAL SNAP RING (3.149") 1 BALL BEARING (W/051-345 INSTR) 1 LOW PROFILE SPROCKET, SEALED 1 IDLER SHAFT (1.125"SQ X1.937") 1 JAM NUT (1-NC) 4 FLG LOCKNUT (1/2-NC) 1 LK BOLT (3/4-NC X 1-1/4", NLK) 2 ZERK (1/4-NF, STR) 1 CHAIN TENSION 4 BOLT (1/2-NC X 2-3/4") 1 SET SCREW (1-NC X 6", SQ) 2 DIRT SHIELD 1 LOW PROFILE SPROCKET, GREASABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ)

301-8280 105-1126 115-464 125-009 140-1298 180-445 106-033 105-833 105-379 115-003 275-043 105-067 106-034 105-1125 140-1299 125-1022

DESCRIPTION

REMARKS

301-8211 (30") 301-8215 (36") 301-8202 (42") 301-8238 (48") - F/N 2 EACH ROLLER ASSY REQUIRES ONE 105-1126 - SEE F/N 1 & 3 EACH ROLLER ASSY REQUIRES ONE 115-464 - SEE F/N 1 & 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1, QTY = 1 PER ROLLER AND 1 PER BOOM

EACH ROLLER ASSY REQUIRES ONE 105-1125 - SEE F/N 1 & 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

140-1302 140-1287 140-1288 140-1304 140-1306 140-1303 140-1292 140-1293 140-1305 140-1307

LOW PROFILE SPROCKET BOOM, SEALED (24") LOW PROFILE SPROCKET BOOM, SEALED (30") LOW PROFILE SPROCKET BOOM, SEALED (36") LOW PROFILE SPROCKET BOOM, SEALED (42") LOW PROFILE SPROCKET BOOM, SEALED (48") LOW PROFILE SPRKT BOOM,GREASABLE (24") LOW PROFILE SPRKT BOOM,GREASABLE (30") LOW PROFILE SPRKT BOOM,GREASABLE (36") LOW PROFILE SPRKT BOOM,GREASABLE (42") LOW PROFILE SPRKT BOOM,GREASABLE (48")

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3

FOOTNOTES:

1- 140-1289 LOW PROFILE SPROCKET ASSY, SEALED, INCL REF #'S 2-5 AND 14 2- 140-1302 LOW PROFILE SPROCKET BOOM, SEALED (24"), INCL REF #'S 1-14 140-1287 LOW PROFILE SPROCKET BOOM, SEALED (30"), INCL REF #'S 1-14 140-1288 LOW PROFILE SPROCKET BOOM, SEALED (36"), INCL REF #'S 1-14 140-1304 LOW PROFILE SPROCKET BOOM, SEALED (42"), INCL REF #'S 1-14 140-1306 LOW PROFILE SPROCKET BOOM, SEALED (48"), INCL REF #'S 1-14 140-1303 LOW PROFILE SPROCKET BOOM, GREASABLE (24"), INCL REF #'S 1-3,6-16 140-1292 LOW PROFILE SPROCKET BOOM, GREASABLE (30"), INCL REF #'S 1-3,6-16 140-1293 LOW PROFILE SPROCKET BOOM, GREASABLE (36"), INCL REF #'S 1-3,6-16 140-1305 LOW PROFILE SPROCKET BOOM, GRESABLE (42"), INCL REF #'S 1-3,6-16 140-1307 LOW PROFILE SPROCKET BOOM, GREASABLE (48"), INCL REF #'S 1-3,6-16 3- 140-1290 LOW PROFILE SPROCKET ASSY, GREASABLE, INCL REF #'S 2,3,10,14-16 NOTE:

01

ID0336937

GREASE BOOM, SPROCKET

9

12

3 4

5

2

1

10 11

6 8

01

7

ID0337901

GREASE BOOM, SPROCKET REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12

1 GREASE TENSION BOOM, 24" 1 INTERNAL SNAP RING (3.149") 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 LOW PROFILE SPROCKET, GREASABLE 1 LK BOLT (3/4-NC X 1-1/4", NLK) 1 ZERK (02N, 5000) 2 FLG LK BOLT (3/8-NC X 3/4) 1 ZERK COVER 1 ZERK (1/4-NF, STR) 1 IDLER SHAFT (1.125"SQ X1.937") 1 DIRT SHIELD 1 DIRT SHIELD

140-1315 115-464 125-1022 140-1299 105-379 115-024 105-825 319-410 115-003 180-445 105-1126 105-1125

DESCRIPTION

REMARKS

140-1316 (30") 140-1317 (36") SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

140-1318 140-1319 140-1327

GREASE BOOM ASSY (24"), SPROCKET GREASE BOOM ASSY (30"), SPROCKET GREASE BOOM ASSY (36"), SPROCKET

INCL'S REF #1-12 INCL'S REF #1-12 INCL'S REF #1-12

FOOTNOTES:

1. 140-1290 LOW PROFILE SPROCKET ASSY, GREASABLE - INCL'S REF#2, 3, 4, 9, 11 & 12

NOTE:

01

ID0337901

BOOM SPROCKET

7 4 3

2

5 2 4 6 1

01

ID0204806

BOOM SPROCKET REF PART NO. NUMBER

QTY

1 140-1098 2 125-007 3 115-013 4 105-416 5 300-7438 6 105-357 7 106-212

1 2 1 2 1 1 1

DESCRIPTION

REMARKS

SPROCKET ASSEMBLY, 14 TOOTH BALL BEARING ZERK (1\4-NF, STR) WASHER (5/8") BUSHING LOCKNUT (5/8-NC) BOLT (5/8-NC X 3-1/2")

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0204806

BOOM

10 14

13

2

4 3

16

8 9 6

1 11

9 15 5

08

12

7

ID0049671

BOOM REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

QTY

140-060 125-009 1 140-051 1 140-027 2 143-314 115-002 1 140-762 1 105-379 2 140-551 1 140-054 1 326-710 1 180-445 2 105-1126 2 140-759 1 140-053 1 115-464 2 115-554 1 140-028 140-712 2 140-653 140-516

DESCRIPTION

REMARKS

SPROCKET BOOM (36") BALL BEARING (1.125") BOOM (3') BOOM SLEEVE SOCKET BOOM SLEEVE SOCKET ZERK (02N90) SPROCKET SIDE PLATE LK BOLT (3/4-NC X 1-1/4", NLK) BOOM EXTENSION (1') IDLER SPROCKET SUPPORT REINFORCEMENT BAR IDLER SHAFT (1.125"SQ X1.937") DIRT SHIELD SLIDE AND STOP IDLER SPROCKET SUPPORT INTERNAL SNAP RING (3.149") COMPRESSION SPRING (8") URETHANE SLEEVE (1.56" X 4.8") SPROCKET (1.654"C12) SPROCKET PARTS ASS'Y (1.654"C12) URETHANE SPRING (1-3/8" X 7")

INCL. REF. NO.'S 1, 2, 5, 8, 9, 10 AND 12 THRU 15 REFER TO INSTRUCTIONS 051-345 INCL. REF. NO.'S 7 AND 11 WELD ON SEE FOOTNOTE 2 WELD ON

WELD ON WELD ON & SEE FOOTNOTE 3

WELD ON SEE FOOTNOTE 1

INCL. REF. NO.'S 1, 9 AND 12 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. URETHANE SPRING (REF. NO. 16) MAY BE USED TO REPLACE COMPRESSION SPRING (REF. NO. 13).

2. ZERK (REF. NO. 3) IS NOT REQUIRED WHEN USING URETHANE BOOM SLEEVE. 3. USED TO SPACE SQ AND RD HOLE GUSSET (REF. NO.'S 7 AND 11).

NOTE:

08

ID0049671

35K DURATOOTH CHAINS 4P CHAIN ASSEMBLIES

2

1

3 4

5 8

03

6

7

PART#

135-1601

135-1602

130-1101 130-1102 130-1103 130-1104 135-1230 135-1231 106-400 105-099 137-214 105-047 136-029 105-258

1 0 0 0 6 7 13 13 13 26 0 0

0 1 0 0 8 8 16 16 16 32 0 0

135-1603 135-1604 135-1605 135-1606 135-1607 135-1608 0 0 1 0 8 9 17 17 17 34 0 0

0 0 0 1 10 11 21 21 21 42 0 0

1 0 0 0 6 7 7 7 19 26 6 12

0 1 0 0 8 8 8 8 24 32 8 16

0 0 1 0 9 8 9 9 25 34 8 16

0 0 0 1 11 11 12 12 32 44 10 20

ID0436038

35K DURATOOTH CHAINS 4P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

135-1601 135-1602 135-1603 135-1604 135-1605 135-1606 135-1607 135-1608

DESCRIPTION

REMARKS

35K 4P DURA 52P 4.4 35K 4P DURA 62P 4.4 35K 4P DURA 68P 4.4 35K 4P DURA 84P 4.4 35K 4P DURA 52P 6.4 35K 4P DURA 62P 6.4 35K 4P DURA 68P 6.4 35K 4P DURA 84P 6.4

NOT SHOWN:

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085.

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

03

ID0436038

35K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

1 2 3 4 5 6

11 10 9 8 7

Part# 135-1600 137-218 135-1531 0 0 137-208 0 0 130-1105 1 0 137-210 0 0 137-209 0 1 135-1230 11 13 135-1231 11 13 106-400 22 26 105-099 22 26 137-214 22 26 105-047 44 52 136-029 0 0 105-258 0 0

01

137-217 0 0 0 0 1 13 13 14 14 38 52 12 24

137-215 0 0 0 1 0 15 16 31 31 31 62 0 0

137-216 0 0 0 1 0 15 16 15 15 47 62 16 32

137-219 1 0 0 0 0 17 17 34 34 34 68 0 0

137-221 1 0 0 0 0 17 17 18 18 50 68 16 32

135-1450 135-1451 137-220 0 0 1 1 1 1 0 0 0 1 1 0 0 0 0 19 19 21 20 20 21 39 19 42 39 19 42 39 59 42 78 78 84 0 20 0 0 40 0

137-222 1 1 0 0 0 21 21 22 22 62 84 20 40

ID0440801

35K DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 137-219 2 137-216 3 137-215 4 137-217 5 137-218 6 135-1600 7 137-221 8 135-1450 9 135-1451 10 137-220 11 137-222

1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

35K 2P DURA 68P 4.6 35K 2P DURA 62P 6.6 35K 2P DURA 62P 4.6 35K 2P DURA 52P 6.6 35K 2P DURA 52P 4.6 35K 2P DURA 44P 4.4 35K 2P DURA 68P 6.6 35K 2P DURA 78P 4.6 35K 2P DURA 78P 6.6 35K 2P DURA 84P 4.6 35K 2P DURA 84P 6.6

NOT SHOWN:

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085.

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0440801

35K SHARK/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES

1

2

Part# 137-233 135-1531 0 137-208 0 130-1105 0 137-210 0 137-209 1 135-1230 6 135-1231 6 135-637 2 135-638 2 135-639 10 106-400 12 105-098 40 137-214 40 137-212 12 105-814 52 136-029 0 105-022 0

01

3

4

135-1021 137-235 0 0 0 0 0 0 0 1 1 0 6 8 6 7 2 3 2 3 10 10 12 16 20 46 40 46 12 16 52 62 10 0 20 0

5

137-236 1 0 0 0 0 6 6 5 5 12 12 56 56 12 68 0 0

6

7 8

135-1445 135-1454 135-1455 137-237 1 0 0 1 0 1 1 1 0 0 0 0 0 1 1 0 0 0 0 0 6 7 10 7 6 6 9 7 4 6 3 6 4 6 3 6 14 14 14 16 12 16 12 16 28 62 42 68 56 62 66 68 12 16 12 16 68 78 78 84 14 0 12 0 28 0 24 0

ID0440984

35K SHARK/DURATOOTH CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

137-233 135-1021 137-235 137-236 135-1445 135-1454 135-1455 137-237

DESCRIPTION

REMARKS

35K 2P CMB DUR/SHK B 52P 4.6 35K 2P CMB DURA/SHK B 52P 6.6 35K 2P CMB DUR/SHK B 62P 4.6 35K 2P CMB DUR/SHK B 68P 4.6 35K 2P SHK B/O COM 68P 6.0 35K 2P CMB DUR/SHK B 78P 4.6 35K 2P CMB DUR/SHK B 78P 6.6 35K 2P CMB DUR/SHK B 84P 4.6

NOT SHOWN:

FOOTNOTES:

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K &35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0440984

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

35K SHARK & ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES

5

4 3

2

1

6

Part# 137-223 135-1531 0 137-208 0 137-210 0 137-209 1 136-163 4 136-164 18 136-165 4 135-637 0 135-638 0 135-639 0 106-400 16 105-098 36 137-214 36 137-212 16 105-814 52 136-029 0 105-022 0

01

137-224 0 0 1 0 5 21 5 0 0 0 20 42 42 20 62 0 0

137-225 1 0 0 0 5 24 5 0 0 0 24 44 44 24 68 0 0

7

137-226 0 0 0 1 0 0 0 4 4 18 16 36 36 16 52 0 0

137-227 0 0 1 0 0 0 0 5 5 21 20 42 42 20 62 0 0

137-228 1 0 0 0 0 0 0 5 5 24 24 44 44 24 68 0 0

8

135-1452 135-1453 0 0 1 1 1 1 0 0 0 0 0 0 0 0 6 6 6 6 27 27 24 24 54 30 54 54 24 24 78 78 0 12 0 24

ID0444723

35K SHARK & ALLIGATOR CHAINS 2P CHAIN ASSEMBLIES REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8

1 1 1 1 1 1 1 1

137-226 137-227 137-228 135-1452 135-1453 137-223 137-224 137-225

DESCRIPTION

35K 2P SHK B/O 52P 4.3 35K 2P SHK B/O 62P 4.3 35K 2P SHK B/O 68P 4.3 35K 2P SHK B/O 78P 4.3 35K 2P SHK B/O 78P 6.3 35K 2P ALG B/O 52P 4.3 35K 2P ALG B/O 62P 4.3 35K 2P ALG B/O 68P 4.3

REMARKS

SEE F/N 1 SEE F/N 1 SEE F/N 1

NOT SHOWN:

FOOTNOTES:

1. USES 131-259 INSERT BITS

NOTE:

1. 35K REPAIR STATION KIT 131-001, 35K MASTER PIN 135-1028, 33K & 35K LOCK KEY 135-1085 2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

01

ID0444723

2. NOT ALL CHAINS LISTED MAY BE SUITABLE FOR YOUR ATTACHMENT. CONSULT A DITCH WITCH DEALER FOR MORE INFORMATION.

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS

HAMMER 3 5

4

SLIDE HAMMER 3 1

2

H

801-056

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS REF PART NO. NUMBER

1.

2.

3.

4.

5.

259-002 259-001 259-036 105-403 105-357 183-072 259-003

QTY

1 1 2 1 1

DESCRIPTION

REMARKS

BIT PULLER - SLIDE HAMMER BIT PULLER - HAMMER BIT PULLER JAM NUT (5/8-NC) LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER

INCL REF NO.'S 1 - 5 EARLY STYLE

FOOTNOTES

NOTE:

H

801-056

SPECIAL TOOLS - ALIG BIT PUNCH

5

3

4

1 9 2 8

6

H

7

801-057

SPECIAL TOOLS - ALIG BIT PUNCH REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

259-150 105-708 105-964 105-994 183-072 259-003 259-151 259-152 259-153 105-357

QTY

DESCRIPTION

REMARKS

INCL REF NO.'S 1 THRU 8

2 1 1 1 1 1 1 1 1

BIT PUNCH - SLIDE HAMMER SET SCREW (3/8-NC X 3/8", NLK) WASHER (.656") FLG LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER HEAVY BIT PUNCH-SLIDE HAMMER LIGHT BIT PUNCH-SLIDE HAMMER PUNCH ADAPTER-SLIDE HAMMER LOCKNUT (5/8-NC)

FOOTNOTES

NOTE:

H

801-057

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

SPROCKET BOOM ADJUSTER KIT

5 5

3 3

1

4

2 2 6 6

01

ID0215031

SPROCKET BOOM ADJUSTER KIT REF PART NO. NUMBER

QTY

140-1159 300-8197 105-352 105-310 141-148 105-136 105-065

1 2 2 1 2 2

1 2 3 4 5 6

DESCRIPTION

SPROCKET BOOM ADJUSTER KIT SPROCKET BOOM ADJUSTER SET SCREW (3/4-NC X 5", SQ) JAM NUT (3/4-NC) SUPPORT CLAMP BAR BOLT (1/2-NC X 3-1/2", GD8) LOCKNUT (1/2-NC)

REMARKS

INCLUDES P/N'S 1-6

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0215031

FRONT END INTERCHANGE STOP

1 2

3

4

01

ID0192909

FRONT END INTERCHANGE STOP REF PART NO. NUMBER

QTY

323-0012 1 300-6609 2 106-210 3 300-6743 4 105-065

1 4 2 4

DESCRIPTION

FRONT END INTERCHANGE STOP FRONT END INTERCHANGE STOP BOLT (1/2-NC X 3") TIE BAR LOCKNUT (1/2-NC)

REMARKS

INCLUDES REF. NO'S 1-4

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0192909

TRENCHER STAND

3

2 4 5

11 7 1 5

6

8

9 7 10

01

ID0188582

TRENCHER STAND REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11

323-0007 300-5163 179-920 179-0001 300-5167 106-210 300-6743 105-065 118-195 313-0001 110-033 300-5164

QTY

DESCRIPTION

- TRENCHER STAND 1 TRENCHER STAND 1 PIN 1 LOCK PIN 2 BOOM STAND 13 BOLT (1/2-NC X 3") 2 TIE BAR 13 LOCKNUT (1/2-NC) 4 .200 CONNECTING LINK 4 LANYARD 2 HAIR CLIP PIN (1/8" X 1/2") 2 STAND BASE

REMARKS

INCLUDES REF. NO'S 1-10

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. ADJUST MOUNT SPACE TO BEST MATCH CHAIN WIDTH AND HAIR CLIP PIN HOLE.

NOTE:

01

ID0188582

FRONT TIE DOWN

7

6

5

4 1 3 2

01

ID0188620

FRONT TIE DOWN REF PART NO. NUMBER

QTY

323-0003 300-5062 105-833 300-5063 105-082 313-759 118-195 183-411

1 4 2 4 1 1 1

1 2 3 4 5 6 7

DESCRIPTION

FRONT TIE DOWN FRONT TIE DOWN FLG LOCKNUT (1/2-NC) TIE BAR BOLT (1/2-NC X 2-1/2") LANYARD .200 CONNECTING LINK PULL PIN (1/2" X 2")

REMARKS

INCLUDES REF. NO'S 1-7

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0188620

BACKFILL BLADE TIE DOWN

2

1 3 4

8

6 7

5

03

ID0188639

BACKFILL BLADE TIE DOWN REF PART NO. NUMBER

QTY

323-0010 300-5978 106-210 118-195 313-759 110-033 110-827 105-065 361-123

1 4 1 2 1 1 4 4

1 2 3 4 5 6 7 8

DESCRIPTION

BACKFILL BLADE TIE DOWN BACKFILL BLADE TIE DOWN BOLT (1/2-NC X 3") .200 CONNECTING LINK LANYARD HAIR CLIP PIN (1/8" X 1/2") PIN LOCKNUT (1/2-NC) WASHER (1/2")

REMARKS

INCLUDES REF. NO'S 1-8

NOT SHOWN:

FOOTNOTES:

NOTE:

03

ID0188639

NOTES:

ID0134963

MISCELLANEOUS

ID0135063

SAE Bolt and Nut Torque Value Chart Grade 5: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

12

16

8

11

20

27

5/16

25

34

15

20

45

60

3/8

40

54

25

34

75

100

7/16

65

90

40

55

125

170

1/2

100

135

60

80

190

260

9/16

150

200

90

125

270

370

5/8

200

270

120

165

370

500

3/4

350

475

210

285

650

880

7/8

560

760

340

460

1250

1425

1

840

1140

500

680

1580

2145

1-1/8

1030

1400

620

840

1950

3645

1-1/4

1460

1980

880

1195

2760

3475

Grade 8: UNC or UNF Thread Size

Hex nut, or bolt tapped into hex nut, or d&t hole

Hex top deformed locknut

Flange nut, locknut, or bolt tapped into flange nut or d&t* hole

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

1/4

14

19

10

14

24

33

5/16

30

40

18

25

50

70

3/8

55

73

35

50

90

125

7/16

85

115

50

70

140

190

1/2

130

175

80

110

220

300

9/16

190

260

110

150

310

420

5/8

260

355

160

245

430

585

3/4

450

610

270

365

750

1015

7/8

730

990

440

600

1210

1640

1

1090

1480

650

880

1320

2465

1-1/8

1550

2100

930

1260

2580

3500

1-1/4

2180

2955

1310

1780

3640

4935

*drilled and tapped

VS03

ID0053384

Metric Bolt and Cap Screw Torque Values Size

Class 4.8

Class 8.8 and 9.8

Class 10.9

Class 12.9

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

Lubricated

Dry

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

N•m

ft•lb

M6

4.8

3.5

6

4.5

9

6.5

11

8.5

13

9.5

17

12

15

11.5

19

14.5

M8

12

8.5

15

11

22

16

28

20

32

24

40

30

37

28

47

35

M10

23

17

29

21

43

32

55

40

63

47

80

60

75

55

95

70

M12

40

29

50

37

75

55

95

70

110

80

140

105

130

95

165

120

M14

63

47

80

60

120

88

150

110

175

130

225

165

205

150

260

190

M16

100

73

125

92

190

140

240

175

275

200

350

225

320

240

400

300

M18

135

100

175

125

260

195

330

250

375

275

475

350

440

325

560

410

M20

190

140

240

180

375

275

475

350

530

400

675

500

625

460

800

580

M22

260

190

330

250

510

375

650

475

725

540

925

675

850

625

1075

800

M24

330

250

425

310

650

475

825

600

925

675

1150

850

1075

800

1350

1000

M27

490

360

625

450

950

700

1200

875

1350

1000

1700

1250

1600

1150

2000

1500

M30

675

490

850

625

1600

950

1650

1200

1850

1350

2300

1700

2150

1600

2700

2000

M33

900

675

1150

850

1750

1300

2200

1650

2500

1850

3150

2350

2900

2150

3700

2750

M36

1150

850

1450

1075

2250

1650

2850

2100

3200

2350

4050

3000

3750

2750

4750

3500

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, these should only be tightened to strength of original.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Tighten plastic insert or crimped type steel locknuts to approximately 50% of dry torque indicated on chart.

Apply torque to the nut - not the bolt head. Tighten toothed or serrated type locknuts to full torque value.

LUBRICATED means coated with lubricant. DRY means plain or zinc plated without any type of lubricant.

VS03

ID0053384

Hydraulic Cylinder Bolt Torque Chart Bolt Size (inch)

Bolt Part No.

Cylinder Repair Kit Part No.

Torque (ft•lb)

Torque (N•m)

1/2

106-096

190-165

90-100

120-135

5/8

106-097

190-166 & 190-169

180-200

245-270

3/4

106-098

190-167 & 190-170

290-325

395-440

7/8

106-122

190-172 & 190-174

410-640

550-625

1

106-145

190-175 & 190-189

630-700

855-950

1-1/8

106-146

190-177

770-850

1045-1170

As a general rule: •

1/2-inch bolts are used in cylinders with 1-inch rods

•

5/8-inch bolts are used in cylinders with 1 1/4-inch rods

•

3/4-inch bolts are used in cylinders with 1 1/2-inch rods

•

7/8-inch bolts are used in cylinders with 1 3/4-inch rods

•

1-inch bolts are used in cylinders with 2-inch rods (one with 1 3/4-inch)

•

1-1/8-inch bolts are used in cylinders with 2-1/4-inch rods

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and torque to value shown on chart.

VS03

ID0053384

Replacement O-Ring Chart Fraction Size

Dash Size

SAE (Port Seal O-Ring)

ORS (Face Seal O-Ring)

Thread Size

O-Ring P/N

Thread Size

O-Ring P/N

1/16

1

NA

NA

NA

NA

1/8

2

5/16 - 24

NA

NA

NA

3/16

3

3/8 - 24

NA

NA

NA

1/4

4

7/16 - 20

155-760

9/16 - 18

157-037

5/16

5

1/2 - 20

NA

NA

NA

3/8

6

9/16 - 18

155-705

11/16 - 16

157-038

1/2

8

3/4 -16

155-706

13/16 - 16

157-039

5/8

10

7/8 - 14

155-707

1 - 14

157-040

3/4

12

1-1/16 - 12

155-709

1-3/16 - 12

157-017

7/8

14

1-3/16 - 12

155-747

NA

NA

1

16

1-5/16 - 12

155-748

1-7/16 - 12

155-714

1-1/4

20

1-5/8 - 12

155-702

1-11/16 - 12

NA

1-1/2

24

1-7/8 - 12

157-001

2 -12

NA

2

32

2-1/2 - 12

NA

NA

NA

2-1/2

40

3 - 12

NA

NA

NA

3

48

3-1/2 - 12

NA

NA

NA

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current CMW part numbered o-ring, or dash size does not occur in current CMW applications SAE = straight thread fitting that seals by sandwiching a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORS = o-ring face seal; a type of fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface

VS03

ID0053384

ZAHN Front End’s Related Publications Component

Ass’y

P/N

Model: R150/R150E .......... Parts Manual .................................................................. .............. 053-1171 R150/R150E ......... Operators Manual ........................................................... .............. 053-1173 R230/R300 ............ Parts Manual .................................................................. .............. 053-1170 R230/R300 ........... Operators Manual ........................................................... .............. 053-1173 R150/R230/R300 ... ZAHN Front End’s .......................................................... .............. 053-1169 R150/R230/R300 ... Tech Supplement ........................................................... .............. 053-1168 R150/R230/R300 ... Special Tools Guide ....................................................... ............... 052-901 Engine: R150/R150E .......... HONDA Parts Manual…IGX440…195-1168, 195-1143... .............. 053-1175 HONDA ................. Service (Shop) Manual – GX390QA ............................... .............. 053-1174 R230/R300 ............ Parts Manual……. 195-1141, 195-1142………………….www.kohlerplus.com KOHLER................ Service (Shop) Manual – TP2428C ................................ .............. 053-1172

Filters Engine: R150/R150E....................... Air Filter ........................................................................................ 195-1302 R150/R150E....................... Fuel Filter ...................................................................................... 195-1307 R230/R300 ......................... Air Filter Parts Ass’y ....................................................................... 194-093 R230/R300 ......................... Element Set (primary) .................................................................... 194-038 R230/R300 ......................... Element (secondary) ...................................................................... 194-039 R230/R300 ......................... Fuel Filter ....................................................................................... 194-669 R230/R300 ......................... Oil Filter ......................................................................................... 157-630

Hydraulic: R150/R150E....................... Oil Filter Element ........................................................................... 149-939 R230/R300 ......................... Oil Filter Element ........................................................................... 149-939

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ........................................... 190-051 O-ring Repair Kit - Field Service (46 different O-rings)................................................... 190-052

VER.02

ID0194473

ZAHN Front End’s Related Publications Component

Ass’y

P/N

Model: R150/R150E........... Parts Manual ..................................................................... .............. 053-1171 R150/R150E .......... Operators Manual .............................................................. .............. 053-1173 R230/R300 ............. Parts Manual ..................................................................... .............. 053-1170 R230/R300 ............ Operators Manual .............................................................. .............. 053-1173 R150/R230/R300 ... ZAHN Front End’s ............................................................. .............. 053-1169 R150/R230/R300 ... Tech Supplement .............................................................. .............. 053-1168 R150/R230/R300 ... Special Tools Guide .......................................................... ............... 052-901 Engine: R150/R150E........... HONDA Parts Manual…IGX440…195-1168, 195-1143 ... .............. 053-1175 HONDA .................. Service (Shop) Manual – GX390QA ................................. .............. 053-1174 R230/R300 ............. Parts Manual……. 195-1141, 195-1142………………….www.kohlerplus.com KOHLER ................ Service (Shop) Manual – TP2428C .................................. .............. 053-1172

Filters Engine: R150/R150E........................ Air Filter ............................................................................................ 195-1302 R150/R150E........................ Fuel Filter .......................................................................................... 195-1307 R230/R300 .......................... Air Filter Parts Ass’y .......................................................................... 194-093 R230/R300 .......................... Element Set (primary) ....................................................................... 194-038 R230/R300 .......................... Element (secondary) ......................................................................... 194-039 R230/R300 .......................... Fuel Filter ........................................................................................... 194-669 R230/R300 .......................... Oil Filter ............................................................................................. 157-630

Hydraulic: R150/R150E........................ Oil Filter Element ............................................................................... 149-939 R230/R300 .......................... Oil Filter Element ............................................................................... 149-939

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) .............................................. 190-051 O-ring Repair Kit - Field Service (46 different O-rings) ...................................................... 190-052

VER.02

ID0194473

Parts Manual Change Request (Please print clearly)

Date: _______________________

Dealer No. (required): _____________________________

Your Name: _____________________________ Phone: _________________

Position: _____________________________

Fax: _________________

E-mail: __________________

Publication Information: Parts Manual No.: _____-_____

Model: __________

Illustration Part No.: Manual Page No.: 1. _____-_____ .......................................................... 1. __________ 2. _____-_____ .......................................................... 2. __________ 3. _____-_____ .......................................................... 3. __________ Nature of Change Request:

 Text

 Graphics

 Missing Information

Describe change requested (if possible, include copy of publication page with changes marked.): ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ Please fax completed form to Parts Manual Department (580) 572-3525 Thank you for taking the time to submit this request. We will contact you if further information is needed to process your request.

ID0135001

ID0040564

ID0135281