Ditch Witch 1030-1230 Parts Manual 053-479 PDF

1030 - 1230

Parts Manual

Issue 18

053-479

1

1030 - 1230 ISSUE NO. 18-PL08/18 For Replacement Copy Order P/N 053-479

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works .

This manual contains information concerning the following models: 1030 & 1230 Trenchers

Copyright 1997, 1998, 2001, 2002, 2004, 2005, 2006, 2007, 2012, 2014, 2018 by The Charles Machine Works, Inc. , Ditch Witch, CMW, AutoCrowd, Jet Trac, Roto Witch, Subsite, Fluid Miser, Power Pipe, Super Witch, Pierce Arrow, The Underground, The Underground Authority Worldwide, and Zahn are registered trademarks of The Charles Machine Works, Inc.

2

3

FOREWORD_________________________________________ This manual contains illustrated parts lists to help you select quality Ditch Witch® replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment.

•

Descriptions and specifications in this book were current at publication.

However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements.

•

Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you.

•

Footnotes provide more information to help you identify parts shown in the manual.

•

Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer.

•

Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering Ditch Witch replacement parts: ♦ Specify parts you need by part number and description, not by illustration

reference numbers.

♦ Have equipment model and serial number on hand to help ensure you get the

right parts for your machine whether it’s old or new.

Thank you for buying and using Ditch Witch equipment and replacement parts.

Ver. 05

ID0128552

4

WARRANTY _________________________ POLICY 1: DITCH WITCH® EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY

DW WARRANTY Policy August, 2016

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work.

EXCLUSIONS FROM PRODUCT WARRANTY • All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse, abuse, improper installation, alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.)

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state.

For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer.

Ver. 06

ID0134872

CONTENTS______________________ Decals

1030 .......................................................8, 12 1230 .....................................................16, 20

Engine Components

Honda 11.0 hp – 1030 ................................ 26 Honda 13.0 hp – 1230 ................................ 30 Honda Remote Air..................................... 38 Kohler 11.0 hp – 1030 ................................ 34 Kohler 12.5 hp – 1230 ................................ 36 Kohler Remote Air ..................................... 40

Powertrain

Drive Axle & Tires ...................................... 44 Ground Drive Gearbox .............................. 46

Frame Components

Control Tower ........................................... 56 Frame Parts ............................................... 52 Handle Bar/Bail ......................................... 58 Neutral Interlock ....................................... 60 Spoils Deflector ......................................... 50

Control Components

Axle Locking Linkage ................................. 64 Crowd Control Linkage .............................. 66 Dig Belt Clutch ..................................... 68, 70 Pump Belt Clutch..................................72, 74

Hydraulics

Control Valve............................................. 86 Cylinder ..................................................... 90 Ground Drive ............................................. 82 Pivot .......................................................... 84 Pump ......................................................... 88 Pump/Reservoir ........................................ 80 Schematic .................................................. 78

Electrical

Frame Harness .......................................... 98 Diagram, Kohler Engine .......................... 100 Schematic – Honda ..................................... 94 Schematic – Kohler ..................................... 96 Tachometer ............................................. 102

Accessories

Alligator Bit Puller ................................... 154 Alligator Bit Punch................................... 156 Backfill Blade ........................................... 160 Boom Sprocket ........................................ 136 Boom, 24.0” – Split ................................. 130 Boom, 24.0” ............................................ 120 Boom, 30.0’’ ............................................ 126 Boom, 30.0” – Split ................................. 132 Boom, 36.0” – Split ................................. 134 Boom, 36.0” ............................................ 128 Boom, Grease.......................................... 138 Boom, Low Profile Sprocket .................... 124 Boom, Roller............................................ 122 Chain Jaw ................................................ 158 Chain, 33K 2PS ........................................ 144 Chain, 33K 4PS ........................................ 146 Chain, Alligator 33K 2PS BO .................... 148 Chain, Shark 35K – old style .................... 150 Chain, Shark II 35K .................................. 152 Gearbox ........................................... 110, 112 Grease Cylinder ....................................... 140 Outboard Bearing, 6” .............................. 114 Outboard Bearing, 8” .............................. 116 Pivot, 6” ................................................... 106 Pivot, 8” ................................................... 108 Spoils Flap ............................................... 118 Trench Cleaner ........................................ 142

Miscellaneous

Bolt/Nut Torque Chart ............................ 164 Filters ...................................................... 170 Optional Kits ........................................... 170 Related Publications ............................... 170 Replacement O-Ring Chart ..................... 169 Warranty Registration ............................ 172

ID0134907

5

6

7

DECALS

8

DECAL LOCATION 1030 ENDS WITH S/N

27

21

18

8

22

7

24 16

2

17 13

4

6

3 11

9 1

12

25 5

10 3 26

28 4 5 2 20

15 19 4

28

1.0

23

.50 14 3

3.0

7.0

20 23

.25 2.5

15

ID0035486

9

DECAL LOCATION 1030 ENDS WITH S/N

15

20

23

27 14

16

3.0

1.62

.125

.5

.25

16

2

21

.75

.25

.25

.25

.25

.25

.25

.25

18 18

.25

18 17 17

17

17

18 .25

.25

.25

17 .25

15

.25

.25

ID0035486

10

DECAL LOCATION 1030 ENDS WITH S/N REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

275-738 274-081 274-208 274-318 274-442 274-575 274-653 274-773 273-390 274-724 275-048 274-764 275-023 275-032 275-043 274-829 275-120 275-173 275-230 275-232 275-449 274-772 275-419 275-428 274-806 274-777 275-383 274-805 275-355 274-291

QTY

1 1 4 3 2 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

REMARKS

DECAL KIT - 1030 ENGINE STOP FUEL SHUTOFF ALERT TIE DOWN LOCATION LIFT LOCATION 1030 MODEL-ID CONSOLE PANEL DITCH WITCH-ID RIGHT GRAPHICS ONE CALL NOTIFICATION IMPORTANT SAFETY RULES 1030 1230 LUBRICATION CHART OIL LEVEL HAND THROTTLE OPERATION CHAIN TENSION DANGER CHAIN & AUGER RESERVOIR (THF) FUEL TANK (GASOLINE) DANGER STRIPE 1.75" X 18" DANGER 1.75" X 18" DITCH WITCH LOGO PLACARD DITCH WITCH I-D WARNING NO FLAME AXLE LOCK ACCENT STRIPE 1.42" X 25.3" DIGGING CHAIN NOTICE SLOPE PARKING ACCENT STRIPE 2.25" x 39" CAUTION HOT PARTS SOUND POWER 10

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. NOT PART OF KIT.

NOTE:

15

ID0035486

11

12

DECAL LOCATION 1030 BEGINS WITH S/N

26

21

18 2

17 13

24 16

8

22

4

6 3 11 1

4

9 5

10

3

12

25

7 27

4 5 2 20

15 19

23

14 27

1.0

3

3.0

4

7.0

20

.50

23

.25 2.5

01

ID0143351

13

DECAL LOCATION 1030 BEGINS WITH S/N

15

20

26

23 14 3.0

1.62

16

.125

.5

.25

16

21

2

.75

.25

.25

.25

.25

.25

.25

.25

18 18

.25

18

17 17

17

17

18 .25

.25

.25

17 .25

01

.25

.25

ID0143351

14

DECAL LOCATION 1030 BEGINS WITH S/N REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

275-910 274-081 274-208 274-318 274-442 700-140 274-653 273-390 274-724 275-048 274-764 275-023 275-032 275-043 274-829 275-120 275-173 275-230 275-232 275-449 274-772 275-419 275-428 274-806 274-777 275-383 275-355 274-291

QTY

DESCRIPTION

REMARKS

1 1 3 4 2 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1

DECAL KIT - 1030 ENGINE STOP FUEL SHUTOFF ALERT TIE DOWN LOCATION LIFT LOCATION 1030 MODEL ID CONSOLE PANEL RIGHT GRAPHICS ONE CALL NOTIFICATION IMPORTANT SAFETY RULES 1030 1230 LUBRICATION CHART OIL LEVEL HAND THROTTLE OPERATION CHAIN TENSION DANGER CHAIN & AUGER RESERVOIR (THF) FUEL TANK (GASOLINE) DANGER STRIPE 1.75" X 18" DANGER 1.75" X 18" DITCH WITCH LOGO PLACARD DITCH WITCH I-D WARNING NO FLAME AXLE LOCK ACCENT STRIPE 1.42" X 25.3" DIGGING CHAIN NOTICE SLOPE PARKING CAUTION HOT PARTS SOUND POWER 10

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. NOT PART OF KIT.

NOTE:

01

ID0143351

15

16

DECAL LOCATION 1230 ENDS WITH S/N 27

21

18

8

22

24

7

16

2

17 13

4

6

3 11 1 9 4

12

25 5 10

3

26

28 4

26

5 2

15 19

1.0

20

4

23

.50

14 3

3.0 7.0 20 23

.25 2.5

19

ID0035490

17

DECAL LOCATION 1230 ENDS WITH S/N

15 20

23

27 14 1.62

16

3.0

.125

.5

.25 2

21

16

.75 .25

.25

.25

.25

.25

.25 18

.25

18 18

17 17

17

17

18 .25

.25

.25

17 .25

19

.25

.25

ID0035490

18

DECAL LOCATION 1230 ENDS WITH S/N REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

275-739 274-081 274-208 274-318 274-442 274-729 274-653 274-773 273-390 274-724 273-475 274-764 275-023 275-032 275-043 274-829 275-120 275-173 273-059 273-058 275-449 274-772 275-419 275-428 274-806 274-777 275-383 274-805 275-355 274-291

QTY

DESCRIPTION

REMARKS

1 1 3 4 2 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1

DECAL KIT - 1230 ENGINE STOP FUEL SHUTOFF ALERT TIE DOWN LOCATION LIFT LOCATION 1230 - MODEL ID CONSOLE PANEL DITCH WITCH - ID RIGHT GAPHICS WARNING ONE CALL NOTIFICATION WARNING READ OPERATOR MANUAL 1030 1230 LUBRICATION CHART OIL LEVEL HAND THROTTLE OPERATION CHAIN TENSION DANGER CHAIN & AUGER RESERVOIR (THF) FUEL TANK (GASOLINE) DANGER STRIPE 1.50” X 18” DANGER 1.50” X 18” DITCH WITCH LOGO PLACARD DITCH WITCH - ID WARNING NO FLAME AXLE LOCK ACCENT STRIPE 1.42” X 25.3” DIGGING CHAIN WARNING SLOPE PARKING ACCENT STRIPE 2.25” X 39” CAUTION HOT PARTS SOUND POWER 10

SEE FOOTNOTE 1

FOOTNOTES:

1 . NOT PART OF KIT

19

ID0035490

19

20

DECAL LOCATION 1230 BEGINS WITH S/N 26

21

18 2

17 13

24 16

8

22

4

6 3 11 1

4

9 5

10

3

12

25

7 27

4 5 2 20

15 19

23

14 27

1.00

3

4

3.0 7.00

20

.50

23

.25 2.50

03

ID0143325

21

DECAL LOCATION 1230 BEGINS WITH S/N 15

20

26

23 14 3.0

1.62

16

.125

.5

.25

16

21

2

.7 5

.25 .25

.25

.25

.25

.25

.25

18 18

.25

18 17 17

17

17

18 .25

.25

.25

17 .25

03

.25

.25

ID0143325

22

DECAL LOCATION 1230 BEGINS WITH S/N REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

275-739 274-081 274-208 274-318 274-442 700-139 274-653 273-390 274-724 273-475 274-764 275-023 275-032 275-043 274-829 275-120 275-173 273-059 273-058 275-449 274-772 275-419 275-428 274-806 274-777 275-383 275-355 274-291

QTY

1 1 3 4 2 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

DECAL KIT - 1230 ENGINE STOP FUEL SHUTOFF ALERT TIE DOWN LOCATION LIFT LOCATION 1230 MODEL ID CONSOLE PANEL RIGHT GRAPHICS WARNING ONE CALL NOTIFICATION WARNING READ OPERATOR MANUAL 1030 1230 LUBRICATION CHART OIL LEVEL HAND THROTTLE OPERATION CHAIN TENSION DANGER CHAIN & AUGER RESERVOIR (THF) FUEL TANK (GASOLINE) DANGER STRIPE 1.50" X 18" DANGER 1.50" X 18" DITCH WITCH LOGO PLACARD DITCH WITCH I-D WARNING NO FLAME AXLE LOCK ACCENT STRIPE 1.42" X 25.3" DIGGING CHAIN WARNING SLOPE PARKING CAUTION HOT PARTS SOUND POWER 10

REMARKS

SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. NOT PART OF KIT.

NOTE:

03

ID0143325

23

24

NOTES:

ID0134963

25

ENGINE COMPONENTS

26

HONDA ENGINE

26 1 27

5 4 3

13 29 28

2 28

TO ENGINE

29 30

5

23

7

14 25

22

24

21

12

6

11

18 19

20

31 9

15

17

32 16

10 8

26

ID0031664

27

HONDA ENGINE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

196-352 196-094 190-777 111-064 154-429 154-089 154-148 105-404 156-498 159-692 108-081 108-080 155-709 106-043 195-158 195-190 195-186 195-275 499-635 159-545 195-159 195-160 195-161 194-009 195-162 194-434 195-283 165-756 159-544 217-758

QTY

1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

CABLE (49.25", HD) THROTTLE CABLE (57.250") THROTTLE CABLE KIT KNOB (1/4", ORANGE) CONNECTOR (M12-1.50-08J90) CAP (08JF) BK CONNECTOR (08J-08J90BK) JAM NUT (3/4-NF) DRAIN LINE (08JFX-13.3") OIL DRAIN HOSE WASHER END CAP O-RING (912 D90) BOLT (5/16-NF X 1") ENGINE (11 HP HONDA ROPE) STARTER, RECOIL CARBURETOR (GX340QA) CARBURETOR (GX340K1QAP) CARBURETOR (GX340K1QDW9) CARB GASKET (GX340K1QDW9) AIR FILTER ELEMENT FUEL TANK FUEL TANK CAP FUEL TANK CAP MUFFLER (GX340QA) MUFFLER (GX340K1QAP)&(DW9) HEAT SHIELD(GX340K1QAP)&(DW9) MUFFLER GASKET(GX340QA) MUFF GAS(GX340K1QAP)&(DW9) LOW OIL PRESSURE SWITCH

REMARKS

OBSLETE,

EARLIER MODELS

OBSOLETE, BEFORE S/N 1Y2534 BEFORE S/N 1Y2534 BEFORE S/N 1Y2534 OBSOLETE AFTER S/N 1Y2534

OBSOLETE

USED WITH MUFFLER 194-434

NOT SHOWN:

FOOTNOTES:

NOTE:

26

ID0031664

28

HONDA ENGINE REF PART NO. NUMBER

QTY

DESCRIPTION

8.

9.

10.

11.

12.

13.

14.

15.

105-883 4 FLG LK BOLT (3/8-NC X 2") 105-814 4 FLG LOCKNUT (3/8-NC) 307-109 1 ENGINE DECK 307-207 1 BELT GUIDE 165-935 1 KEY (1/4" X 1") 105-975 1 WASHER (3/4") 165-958 1 WOODRUFF KEY (3/16" X 5/8") 170-145 1 SHEAVE(3/3V-.375",1/4" KWY) 105-701 1 SET SCREW (5/16-NC X 3/8",CUP) 16. 170-081 1 BELT SET (2/3V-52.700") 17. 170-084 1 BELT (1/3V-42.000") 18. 105-118 AR WASHER (3/8") 19. 170-247 1 SHEAVE (1/3V-.375",1/4" KWY) 20. 105-150 1 BOLT (3/8-NC X 1-3/4") 21. 105-819 1 FLG LK BOLT (1/4-NC X 1") 22. 181-980 1 BUSHING 23. 170-146 1 SHEAVE (1/3V-.750", 3/16" KWY) 24. 105-047 1 LOCKNUT (3/8-NC) 25. 361-119 1 BELT RETAINER 26. 106-379 2 FLG LK SCREW (M6-1.00 X 20MM) 27. 106-574 2 CLIP NUT (M6-1.00) 28. 108-063 2 SET SCREW (#10 X .188") 29. 107-912 2 CABLE STOP 30. 115-618 1 COMPRESSION SPRING (.625") 31. 105-826 4 FLG LK BOLT (3/8-NC X 1") 32. 105-845 4 FLG LOCKNUT (3/8-NC)

NOT SHOWN:

217-567 1 TACHOMETER 190-1790 1 TACHOMETER/HOUR METER KIT

REMARKS

BEFORE S/N 1Y2534

DIGGING GEAR BOX PUMP DRIVE

BEGINS WITH S/N 1X0907 BEGINS WITH S/N 1X0907 SEE FOOTNOTE 1. BEGINS WITH S/N: 1Y3616 BEGINS WITH S/N: 1Y3616

OBSOLETE, FIELD INSTALLED SUSPERSEEDS 214-519 TACHOMETER AND ASSOC HARDWARE

FOOTNOTES:

1. USE LOCTITE 277 ON BOLT WHEN ASSEMBLING ENGINE DECK.

NOTE:

26

ID0031664

29

30

HONDA ENGINE 1230

26 1 27

5 4 3

13 29 28

2 28

TO ENGINE

29 30

5

23

7

14 25

22

24

21

12

6

11

18 19

20

31 9

15

17

32 16

10 8

21

ID0035496

31

HONDA ENGINE 1230

REF PART NO. NUMBER

1.

1.

2.

3.

4.

5.

6.

7.

196-352 196-094 190-777 111-064 154-429 154-089 154-148 105-404 156-498 159-692 108-081 108-080 155-709 106-043 195-278 195-190 195-186 195-275 499-635 159-545 195-159 195-160 195-161 194-009 195-162 194-434 195-283 165-756 159-544 217-758

QTY

1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

CABLE (49.25", HD) THROTTLE CABLE (57.250") THROTTLE CABLE KIT KNOB (1/4", ORANGE) CONNECTOR (M12-1.50-08J90) CAP (08JF) BK CONNECTOR (08J-08J90BK) JAM NUT (3/4-NF) DRAIN LINE (08JFX-13.3") OIL DRAIN HOSE WASHER END CAP O-RING (912 D90) BOLT (5/16-NF X 1") ENGINE (13 HP HONDA ROPE) STARTER, RECOIL CARBURETOR (GX340QA) CARBURETOR (GX340K1QAP) CARBURETOR (GX340K1QDW9) CARB GASKET (GX340K1QDW9) AIR FILTER ELEMENT FUEL TANK FUEL TANK CAP FUEL TANK CAP MUFFLER (GX340QA) MUFFLER (GX340K1QAP)&(DW9) HEAT SHIELD(GX340K1QAP)&(DW9) MUFFLER GASKET(GX340QA) MUFF GAS(GX340K1QAP)&(DW9) LOW OIL PRESSURE SWITCH

REMARKS

OBSOLETE,

EARLIER MODELS

OBSOLETE, BEFORE S/N 1Y2534 BEFORE S/N 1Y2534 BEFORE S/N 1Y2534

OBSOLETE, REPLACE WITH 159-692 AFTER S/N 1Y2534

OBSOLETE

NOT SHOWN:

FOOTNOTES:

NOTE:

21

ID0035496

32

HONDA ENGINE 1230

REF PART NO. NUMBER

QTY

8.

9.

10.

11.

12.

13.

14.

15.

105-883 4 105-814 4 307-109 1 307-207 1 165-935 1 105-975 1 165-958 1 170-145 1 105-701 1 16. 170-081 1 17. 170-084 1 18. 105-118 AR 19. 170-247 1 20. 105-150 1 21. 105-819 1 22. 181-980 1 23. 170-146 1 24. 105-047 1 25. 361-119 1 26. 106-379 2 27. 106-574 2 28. 108-063 2 29. 107-912 2 30. 115-618 1 31. 105-826 4 32. 105-845 4

DESCRIPTION

FLG LK BOLT (3/8-NC X 2") FLG LOCKNUT (3/8-NC) ENGINE DECK BELT GUIDE KEY (1/4" X 1") WASHER (3/4") WOODRUFF KEY (3/16" X 5/8") SHEAVE(3/3V-.375",1/4" KWY) SET SCREW (5/16-NC X 3/8",CUP) BELT SET (2/3V-52.700") BELT (1/3V-42.000") WASHER (3/8") SHEAVE (1/3V-.375",1/4" KWY) BOLT (3/8-NC X 1-3/4") FLG LK BOLT (1/4-NC X 1") BUSHING SHEAVE (1/3V-.750", 3/16" KWY) LOCKNUT (3/8-NC) BELT RETAINER FLG LK SCREW (M6-1.00 X 20MM) CLIP NUT (M6-1.00) SET SCREW (#10 X .188") CABLE STOP COMPRESSION SPRING (.625") FLG LK BOLT (3/8-NC X 1") FLG LOCKNUT (3/8-NC)

REMARKS

BEFORE S/N 1Y2534

DIGGING GEAR BOX PUMP DRIVE

BEGINS WITH S/N 1X0907 BEGINS WITH S/N 1X0907 SEE FOOTNOTE 1. BEGINS WITH S/N: 1Y3616 BEGINS WITH S/N: 1Y3616

NOT SHOWN:

217-567 1 190-1790 1

TACHOMETER TACHOMETER/HOUR METER KIT

OBSOLETE, FIELD INSTALLED SUPERSEEDS 214-519 AND ASSOC HARDWARE

FOOTNOTES:

1. USE LOCTITE 277 ON BOLT WHEN ASSEMBLING ENGINE DECK.

NOTE:

21

ID0035496

33

34

KOHLER "COMMAND " ENGINE 1030

6 4 3

1

5

2

25

22

7

14 28

24 23

8

27 15 21 20

12 13

9

16 17

19

10 18

11 26

12

ID0035497

35

KOHLER "COMMAND " ENGINE 1030

REF PART NO. NUMBER

QTY

1.

1

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

196-352 111-064 196-094 110-124 154-201 154-089 154-148 105-404 105-975 156-488 155-057 195-157 195-372 195-373 195-164 195-165 195-166 195-167 195-256 195-169 195-175 195-177 216-022 195-170 159-066 195-171 195-172 195-173 195-174 110-636 195-176 195-185 105-826 105-814 307-109 165-935 365-219 165-958 107-245 170-147 170-163 170-260 170-081 170-080 170-247 105-118 105-075 107-243 181-980 170-146 105-883 105-047 361-119

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 8 1 1 1 1 2 1 1 1 1 1 3 1 1 1 1 4 1 1

DESCRIPTION

CABLE (49.250", HD) KNOB (1/4-NC, ORANGE) THROTTLE CABLE (57.250") KNOB (.368", SLT BLK) CONNECTOR (06N-08J90) CAP (08JF) BK CONNECTOR (O8J-08J90BK) JAM NUT (3/4-NF) WASHER (3/4") OIL DRAIN LINE (08JFX-12.2") UNION (06N-06NFX) ENGINE (11 HP) AIR CLEANER ELEMENT-PAPER AIR CLEANER ELEMENT-FORM REPLACEMENT CARBURETOR KIT DIPSTICK FUEL TANK FUEL TANK CAP FUEL FILTER (04H-04H, IN-LINE) FUEL PUMP KIT MUFFLER MOUNT BRACKET EXHAUST DEFLECTOR IGNITION MODULE MUFFLER ENGINE OIL FILTER RECOIL STARTER FUEL TANK BUSHING FUEL TANK VALVE ELEMENT COVER KNOB (1/4-NC, ALUMINUM) MUFFLER GUARD SPARK ARRESTOR FLG LK BOLT (3/8-NC X 1") FLG LOCKNUT (3/8-NC) ENGINE DECK KEY (1/4" X 1") CLUTCH PIVOT ASSEMBLY WOODRUFF KEY (3/16" X 5/8") FLG LK BOLT (3/8-NC X 3/4" NLK) SHEAVE BUSHING (1.125"-SH) BOLT GROUP KIT SHEAVE (3/3V-3.350"-SH) BELT SET (2/3V-52.700") BELT IDLER SHEAVE (1/3V-.375") WASHER (3/8") BOLT (3/8-NC X 2") FLG LK BOLT (1/4-NC X 1", NLK) BUSHING SHEAVE (1/3V-.750", 3/16" KWY) FLG LK BOLT (3/8-NC X 2") LOCKNUT (3/8-NC) BELT RETAINER

REMARKS

EARLIER MODELS

DIGGING GEAR BOX PUMP DRIVE

NOT SHOWN:

217-567 1 190-1790 1

TACHOMETER TACHOMETER/HOUR METER KIT

FIELD INSTALLED SUPERESEEDS 214-519 AND ASSOC HARDWARE

FOOTNOTES: NOTE:

12

ID0035497

36

KOHLER "COMMAND " ENGINE 1230

6 8 4

1

5

3 2

7

14 25

28

24 27

12

15

23

13

21

9

16

20

17

22 19

10 18

11 26

12

ID0035500

37

KOHLER "COMMAND " ENGINE 1230

REF PART NO. NUMBER

1.

196-352 111-064 196-094 110-124 2. 154-201 3. 154-089 4. 154-148 105-404 5. 105-975 6. 156-488 7. 155-057 8. 195-277 195-372 195-373 195-164 195-165 195-166 195-167 195-256 195-169 195-175 195-177 216-022 195-170 159-066 195-171 195-172 195-173 195-174 110-636 195-176 195-185 9. 105-826 10. 105-814 11. 307-109 12. 165-935 13. 365-219 14. 165-958 15. 107-245 16. 170-147 170-163 17. 170-260 18. 170-081 19. 170-080 20. 170-247 21. 105-118 22. 105-075 23. 107-243 24. 181-980 25. 170-146 26. 105-883 27. 105-047 28. 361-119

QTY

DESCRIPTION

CABLE (49.250", HD) KNOB (1/4-NC, ORANGE) 1 THROTTLE CABLE (57.250") KNOB (.368", SLT BLK) 1 CONNECTOR (06N-08J90) 1 CAP (08JF) 1 BK CONNECTOR (O8J-08J90BK) JAM NUT (3/4-NF) 1 WASHER (3/4") 1 OIL DRAIN LINE (08JFX-12.2") 1 UNION (06N-06NFX) 1 ENGINE (12.5 HP) 1 AIR CLEANER ELEMENT-PAPER 1 AIR CLEANER ELEMENT-FORM 1 REPLACEMENT CARBURETOR KIT 1 DIPSTICK 1 FUEL TANK 1 FUEL TANK CAP 1 FUEL FILTER (04H-04H, IN-LINE) 1 FUEL PUMP KIT 1 MUFFLER MOUNT BRACKET 1 EXHAUST DEFLECTOR 1 IGNITION MODULE 1 MUFFLER 1 ENGINE OIL FILTER 1 RECOIL STARTER 1 FUEL TANK BUSHING 1 FUEL TANK VALVE 1 ELEMENT COVER 1 KNOB (1/4-NC, ALUMINUM) 1 MUFFLER GUARD 1 SPARK ARRESTOR 4 FLG LK BOLT (3/8-NC X 1") 8 FLG LOCKNUT (3/8-NC) 1 ENGINE DECK 1 KEY (1/4" X 1") 1 CLUTCH PIVOT ASSEMBLY 1 WOODRUFF KEY (3/16" X 5/8") 2 FLG LK BOLT (3/8-NC X 3/4" NLK) 1 SHEAVE BUSHING (1.125"-SH) BOLT GROUP KIT 1 SHEAVE (3/3V-3.350"-SH) 1 BELT SET (2/3V-52.700") 1 BELT 1 IDLER SHEAVE (1/3V-.375") 3 WASHER (3/8") 1 BOLT (3/8-NC X 2") 1 FLG LK BOLT (1/4-NC X 1", NLK) 1 BUSHING 1 SHEAVE (1/3V-.750", 3/16" KWY) 4 FLG LK BOLT (3/8-NC X 2") 1 LOCKNUT (3/8-NC) 1 BELT RETAINER

REMARKS

1

EARLIER MODELS

DIGGING GEAR BOX PUMP DRIVE

NOT SHOWN:

217-567 1 190-1790 1

TACHOMETER TACHOMETER/HOUR METER KIT

FIELD INSTALLED SUPERSEEDS 214-519 TACHOMETER AND ASSOC HARDWARE

FOOTNOTES:

NOTE:

12

ID0035500

38

39

40

41

42

NOTES:

ID0134963

43

POWERTRAIN

44

DRIVE AXLE AND TIRES

22 1 3 14

17 6 18 9

19

23 16

11 10

25

15

24 5 25 12

4 13

8

24 7 25

5 12

8

1 7

25

14

2 26

3 21

14

27 20

ID0114275

45

DRIVE AXLE AND TIRES SEE FOOTNOTE 2 REF PART NO. NUMBER

QTY

191-343 205-776 1 205-763 1 205-777 1 205-764 1 205-861 2 205-479 1 205-480 1 205-483 1 205-484 1 1. 165-931 2 2. 105-054 10 3. 107-214 2 4. 110-056 1 5. 105-702 2 6. 105-701 2 7. 105-834 6 8. 105-826 6 9. 115-003 1 10. 115-637 1 11. 115-638 1 12. 125-708 2 13. 161-299 1 14. 161-303 2 107-048 10 179-786 2 107-048 10 15. 161-088 1 16. 161-089 1 17. 165-935 1 18. 166-180 1 19. 181-823 1 20. 205-165 AR 21. 205-164 2 22. 155-912 1 23. 115-474 1 24. 125-053 2 25. 110-396 4 26. 205-103 2 205-144 2 205-477 2 27. 205-227 2 205-476 2

DESCRIPTION

REMARKS

TRACTION LUG TIRE KIT T/W (16 X 6.50-8, B4TL, L) T/W (16 X 6.50-8, B4TL, L, TYL) T/W (16 X 6.50-8, B4TL, R) T/W (16 X 6.50-8, B4TL, R, TYL) T/W (18 X 8.50-8, B4TL) TIRE & WHEEL (RIGHT) TIRE & WHEEL (LEFT) URETHANE FILL 16 X 6.5-8, B4TL,L URETHANE FILL 16 X 6.50-8,B4TL,R WOODRUFF KEY (1/4" X 1") LUG NUT (7/16-NF) LOCKNUT (7/8-14 NF, NYL) MACHINERY BUSHING (1-1/4") SET SCREW (3/8-NC X 3/8", CUP) SET SCREW (5/16-NC X 3/8", CUP) FLG LOCKNUT (3/8-NC) FLG LK BOLT (3/8-NC X 1") ZERK (1/4-NF, STR) COMPRESSION SPRING COMPRESSION SPRING LOCK COLLAR (1.250") AXLE HUB LUG BOLT (7/16-NF X 1-3/4") HUB LUG BOLT (7/16-NF X 1-3/4") LOCK HUB DRIVE HUB KEY (1/4" X 1") GEARBOX (10:1 RATIO) SPACER VALVE CAP (.305"-32) VALVE STEM (.453", SNAP-IN) AIR VENT (02N) EXTERNAL SNAP RING (1.125") BALL BEARING (1.250") FLANGETTE (3-BOLT, L/ZERK) TIRE (16 X 6.50-8, B4TL, B/L) TIRE (18 X 8.50-8, B4TL, NHS) TIRE (18 X 9.50-8, B4TL T/L) WHEEL (8.00" X 5.38", W/5) WHEEL (8.00" X 6.937", W/5)

SEE FOOTNOTE 2 OBSOLETE OBSOLETE SEE FOOTNOTE 2 SEE FOOTNOTE 2

SEE FOOTNOTE 2

INCL REF NO. 20

NOT SHOWN:

205-173 AR 184-209 2

TYRFIL (24 LBS/TIRE) WHEEL SPACER

OBSOLETE SEE FOOTNOTE 1

FOOTNOTES:

1. USED WITH 205-861, SOFTRAC TIRE AND WHEEL 2. THE TRACTION TIRE LUG KIT 191-343 CONTAINS 2X 179-786, 205-479,205-480, AND 10X 105-054

14

ID0114275

46

GROUND DRIVE GEARBOX

2 25

24 22 1 26

3

6

13 5 12

19

18

3 10

11

8 5 4

7

21 20

14 21

16 17

7

25

8 9 10 15 23

02

ID0138721

47

GROUND DRIVE GEARBOX REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

QTY

166-180 105-223 1 105-826 1 106-131 2 106-204 2 115-165 2 126-043 1 126-088 2 125-277 2 157-107 1 157-628 2 158-756 1 158-037 1 500-823 165-931 1 155-912 1 160-439 1 165-788 AR 165-789 AR 165-790 AR 165-820 AR 167-232 1 167-320 1 168-005 1 184-441 2 205-715 1 307-115 1 363-431 1 105-825 6 106-039 1

DESCRIPTION

REMARKS

GEARBOX (10:1 RATIO) WASHER (3/8") FLG LK BOLT (3/8-NC X 1") DOWEL PIN (3/16" X 1") BOLT (1/2-NC X 1-1/2", SOC) PLUG (08N, SOC) TAPERED BRNG/RACE (1.250") TAPERED BEARING (1.125") TAPERED RACE (2.440") O-RING (157 D70) INTERNAL SEAL (1.125") HYDRAULIC MOTOR HYDRAULIC MOTOR SEAL REPAIR KIT WOODRUFF KEY (1/4" X 1") AIR VENT (02N) GEARBOX HOUSING SHIM (.003" GREEN) SHIM (.002" RED) SHIM (.010" BROWN) SHIM (.015" PINK) WORM SHAFT WORM GEAR SPACER GREASE CAP COVER PLATE GEARBOX MOUNT FLG LK BOLT (3/8-NC X 3/4") NUTSERT (3/8-NC)

INCL REF NO.'S 1 THRU 26

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0138721

48

NOTES:

ID0134963

49

FRAME COMPONENTS

50

51

52

FRAME PARTS

3

18

28 3 27

15 29

7

26 22

3 12

18 5 31

18

8

30 23

32

20

10

5 20

11

21 31

32

5 24

2 23 32 6

13

9 6 13

19 1

17

3

14

4 1

13

2 16

3

23 4

06

25

ID0145453

53

FRAME PARTS REF PART NO. NUMBER

QTY

DESCRIPTION

1.

2.

3.

106-039 4 105-841 5 105-823 10

NUTSERT (3/8-NC) CLIP NUT (5/16-NC) FLG LK BOLT (5/16-NC X 3/4")

4.

5.

105-826 106-038

5 4

FLG LK BOLT (3/8-NC X 1") NUTSERT (5/16-NC)

6.

115-483

2

KLIP RING (1.25")

7.

307-240 1 300-4997 1 184-975 1

GUARD STRAP PLATE GUARD STRAP PLATE AXLE PIN

8.

9.

183-472

1

PIN

10.

205-835 205-485

1 1

T/W (13 X 5.00-6, A2TL) UTETHANE FILL 13 X 5.00-6, A

205-1128 1 205-843

1

REMARKS

OBSOLETE, ENDS WITH S/N A70001019 BEGINS WITH S/N C70001020

SOLID TIRE 13 X 5.00 X 6

SUPERSEDED BY 205-1128 SUPERSEDED BY 205-1128 SEE NOT SHOWN FOR SERVICE PARTS

T/W (13 X 5.00-6, A2TL,TYRFIL)

OBSOLETE

205-076 205-233

TIRE (13 X 5.00-6, A2TL,F RIB) WHEEL (6.0" X 3.5")

INCLUDES COMPOSITION BUSHING

125-703 205-164

COMPOSITION BUSHING (.750", FLG) VALVE STEM (.453", SNAP-IN)

1

11.

12.

13.

205-165 307-130 307-109 105-825

1 8

VALVE CAP (.305"-32) FRAME ENGINE DECK FLG LK BOLT (3/8-NC X 3/4")

14.

15.

362-712 362-909

1 1

COVER LEFT ENGINE COVER

16.

17.

362-448 307-031

1 1

CYLINDER COVER PANEL MOUNT TAB

18.

19.

105-873 363-431

8 1

FLG LK BOLT (5/16-NC X 1") GEARBOX MOUNT

20.

117-614 AR

FRICTION WASHER (.781")

21.

22.

105-065 362-910

1 1

LOCKNUT (1/2-NC) ENGINE COVER RIGHT

23.

105-845

6

FLG LOCKNUT (3/8-NC)

NOT SHOWN:

190-1719

1

TRAIL WHEEL BEARING KIT

ENDS WITH S/N:

INCLUDES GREASE ZERK AND 2 WHEEL BEARINGS

FOOTNOTES:

NOTE:

06

ID0145453

54

FRAME PARTS REF PART NO. NUMBER

QTY

DESCRIPTION

24.

25.

115-663 307-116

1 1

GROMMET EDGE (1/4" X 12.7") PAN

26.

27.

105-118 307-239

2 1

WASHER (3/8") PLATE

28.

320-321 1 307-241 1 300-4998 1

MOUNT STRAP GUARD STRAP PLATE GUARD STRAP PLATE

29.

30.

31.

32.

106-011 2 107-244 4 115-704 AR 105-137 11

FLG SCREW (5/16-NC X 1") FLG LK BOLT (3/8-NC X 1", NLK) BULK EDGE (1/4", SOLD PER 1") CLIP NUT (5/16-NC)

REMARKS

ENDS WITH S/N BEGINS WITH S/N OBSOLETE, ENDS WITH S/N A70001019 BEGINS WITH S/N C70001020 BEGINS WITH S/N 1X0716. SEE FOOTNOTE 1 USE 5" PER PLACE

NOT SHOWN:

FOOTNOTES:

1. TIGHTEN BOLT TO 65-70 FT/LB'S ON NUT SIDE.

NOTE:

06

ID0145453

55

56

CONTROL TOWER 22 24 6

12 20 21 3 9

16 10 19

1

SEE FOOTNOTE 2

26 13 2

15 22

7

13

12 25

26

SEE FOOTNOTE 2

14

8 5 26

18 11

9

9 4

17

26

14

23

SEE FOOTNOTE 3

17

ID0035539

57

CONTROL TOWER REF PART NO. NUMBER

QTY

DESCRIPTION

1. 307-190 1 CONTROL TOWER 2. 307-149 1 REAR COVER PLATE 3. 307-194 1 TOP TOWER 4. 307-242 1 SHIELD 5. 301-571 1 BELT RETAINER 6. 362-916 1 DASH PANEL 7. 318-588 1 MANUAL COMPARTMENT 8. 110-348 4 POP RIVET (3/16" X .664") 9. 105-823 4 FLG LK BOLT (5/16-NC X 3/4") 10. 106-010 2 FLG SCREW (5/16-NC X 3/4") 11. 105-834 10 FLG LOCKNUT (3/8-NC) 12. 105-841 6 CLIP NUT (5/16-NC) 13. 106-038 4 NUTSERT (5/16-NC) 14. 105-825 10 FLG LK BOLT (3/8-NC X 3/4") 15. 115-686 AR BULK EDGE (5/32", SOLD PER 1") 16. 110-347 1 SLOT PLUG (1" X 3") 17. 107-282 4 BOLT (3/8-NC X 5.5") 18. 115-320 1 GROMMET (1-1/2") 19. 215-187 1 INTERLOCK MODULE 20. 105-820 1 FLG LK BOLT (1/4-NC X 3/4") 21. 105-832 1 FLG LOCKNUT (1/4-NC) 22. 106-011 4 FLG SCREW (5/16-NC X 1") 23. 105-873 2 FLG LK BOLT (5/16-NC X 1") 24. 106-389 2 WASHER (M8) 25. 105-117 2 WASHER (5/16") 26. 105-137 8 CLIP NUT (5/16")

REMARKS

USE 1 @ 3-5/8"

BEGINS WITH S/N 1S0157 SEE FOOTNOTE 1 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1.

2.

3.

END WITH S/N 1T1073 BEGIN WITH S/N 1T1074, INCLUDING S/N 1T0941 105-825 FLG LK BOLT (3/8-NC X 3/4"), AND 105-834 FLG LOCKNUT (3/8-NC) END WITH S/N 1T1073

NOTE:

17

ID0035539

58

HANDLE BAR/BAIL

5 9

2

2

8

3

9 7 2

4

9 3 7

6

1

11

ID0035546

59

HANDLE BAR/BAIL REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

307-036 303-395 307-247 125-548 501-325 307-118 303-397 105-513 105-031 105-003 307-190 125-403 125-457

QTY

1 1 2 2 4 1 1 2 6 4 2 2

DESCRIPTION

REMARKS

HANDLEBAR GRIP HANDLEBAR SHAFT SUPPORT FLANGE BEARING (5/8") FLG LOCK BOLT (5/16-NC X 5/8") BAIL BAIL ARM ROLL PIN (1/4" X 1-1/4") BOLT (3/8-NC X 1") FLG LOCKNUT (5/16-NC) CONTROL TOWER BRONZE BUSHING (.625") BRONZE BUSHING (.625"X.250")

ENDS WITH S/N 1S1141 BEGINS WITH S/N 1S1142 ENDS WITH S/N 1X1188 BEGINS WITH S/N 1X1189 ENDS WITH S/N 1S1141 BEGINS WITH S/N 1S1142

BEGINS WITH S/N 1S1142 ENDS WITH S/N 1X1188 BEGINS WITH S/N 1X1189

NOT SHOWN:

FOOTNOTES:

NOTE:

11

ID0035546

60

NEUTRAL INTERLOCK

7 1

8

5

6

3 2 4

G

805-526

61

NEUTRAL INTERLOCK REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

215-194 307-222 105-525 307-142 303-396 106-408 106-048 307-238 307-194

QTY

DESCRIPTION

1 1 1 1 1 2 2 1 -

PLUNGER SWITCH SWITCH PLATE ROLL PIN (3/16" X 1-1/4") BAIL SHAFT BAIL SHAFT BOLT (#10-24 X 1-1/4", SOC, GD8) LOCKNUT (#10-24) SPACER PLATE TOP TOWER

REMARKS

ENDS WITH S/N 1S1141 BEGINS WITH S/N 1S1142

FOOTNOTES

NOTE:

G

805-526

62

NOTES:

ID0134963

63

CONTROL COMPONENTS

64

65

66

CROWD CONTROL LINKAGE 5 1

6 8 2

4

7

9 15

19

10 18 16 11

17 16 15

OLD STYLE

17

11

13 12

14

18 21

22

3

20

25

27

3

22 23

26 22 14

31

34

32 33

28

30 29

16

22 13

35 24

ID0035564

67

CROWD CONTROL LINKAGE REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

107-253 117-148 105-117 117-600 110-465 307-148 307-185 106-126 105-525 160-350 505-113 105-106 307-180 303-888 105-832 160-396 105-262 307-143 303-892 105-093 158-312 153-578 105-089 105-735 105-881 160-483 105-106 178-254 125-547 105-736 117-254 115-601 105-033 105-109 160-363 105-213 365-103 105-803 106-076 106-114

QTY

1 1 2 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 2 1 5 1 4 1 1 1 1 1 1 1 1 1 1 1 1 3

DESCRIPTION

LOCKNUT (1-12NF, NYLON INSERT) CROWD CONTROL SPRING WASHER (5/16") FRICTION WASHER (1.020") KNOB (1/2-NC, ORANGE) CROWD CONTROL LEVER CROWD CONTROL BELLEVILLE WASHER (1") ROLL PIN (3/16" X 1-1/4") BALL JOINT (3/8-NF, RH) LOCKNUT (3/8-NF) BOLT (1/4-NC X 2") SWASH PLATE LEVER SWASH PLATE LEVER FLG LK NUT (1/4-NC) BALL JOINT (3/8-NF, LH) NUT (3/8-NF, LH) SWASH PLATE ROD LINKAGE CONTROL ROD NUT (3/8-NF) HYDRAULIC PUMP HYDRAULIC PUMP LOCKNUT (5/16-NC) ROD LINK WASHER (5/16") CAM PLATE BOLT (1/4-NC X 2") ROLLER BEARING ROD LINK SPRING EXTENSION SPRING BOLT (5/16-NC X 2") BOLT (5/16-NC X 1-1/2", NLK) ROD END (5/16-NF, FM, LH) NUT (5/16-NF) CROWD LINK NUT (5/16-NF, LH) WASHER (1/4") FLG LK BOLT (1/4-NC X 1/2")

REMARKS

SEE FOOTNOTE 2

SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 1 AND 2 SEE FOOTNOTE 1 AND 2 SEE FOOTNOTE 1 AND 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 1 AND 2 OBSOLETE, PUMP MODEL # 15-2176 PUMP MODEL # 15-2298 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 OBSOLETE, SEE FOOTNOTE 3 SEE FOOTNOTE 2, 4 & 5 SEE FOOTNOTE 2 BEGINS WITH S/N 1S2268 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2

FOOTNOTES:

1.

2.

3.

4.

5.

OLD STYLE GROUND DRIVE ENDS WITH S/N 1S2267, & INCLUDED REF NO. 10-18.

NEW STYLE GROUND DRIVE BEGINS WITH S/N 1S2269 & INCL'S REF NO. 13, 15-18 & 20-34.

ENDS WITH S/N 1W0962.

MUST LUBRICATE BEFORE USE. USE 1 WASHER (105-881) WHEN USING 125-547 BEARING.

NOTE:

16

ID0035564

68

DIG BELT CLUTCH END WITH S/N - SEE FOOTNOTE 1

1

4 13

24 26

2 7

5 13 3 23

15

8 22

9 17

10

12

21

3

6

25

16 13

14

11

19

18 20

27

17 3

J

805-319

69

DIG BELT CLUTCH END WITH S/N - SEE FOOTNOTE 1 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

QTY

110-375 1 125-403 1 105-047 3 105-513 1 160-350 1 505-113 1 307-135 1 307-153 1 105-075 1 105-886 1 105-530 1 170-314 1 115-503 3 307-150 1 179-178 1 125-480 1 105-117 AR 501-358 1 115-636 1 307-155 1 307-195 1 105-093 1 117-130 1 117-263 1 307-152 1 105-826 2 125-430 1 105-834 2

DESCRIPTION

REMARKS

KNOB (1/2-NC, YELLOW) BRONZE BUSHING (.625") LOCKNUT (3/8-NC) ROLL PIN (1/4" X 1-1/4") BALL JOINT (3/8-NF, RH) LOCKNUT (3/8-NF) DIG CAM DIG CLUTCH ROD LINKAGE BOLT (3/8-NC X 2") WASHER (.410") COTTER PIN (1/16" X 3/4") BELT ROLLER KLIP RING (3/4") DIG CLUTCH MOUNT UPPER PIVOT PIN BRONZE BUSHING (.625" X 1.375") WASHER (5/16") ROLL PIN (3/32" X 3/4") COMPRESSION SPRING DIG CLUTCH RETURN ROD DIG CLUTCH NUT (3/8-NF) COMPRESSION SPRING COMPRESSION SPRING DIG CONTROL LEVER FLG LK BOLT (3/8-NC X 1") BRONZE BUSHING (.502") FLG LOCKNUT (3/8-NC)

FOOTNOTES

1. ENDS WITH S/N 1P3354 - 1030H ENDS WITH S/N 1P3369 - 1030K ENDS WITH S/N 1P3229 - 1230H ENDS WITH S/N 1P3228 - 1230K

NOTE:

J

805-319

70

DIG BELT CLUTCH BEGINS WITH S/N - SEE FOOTNOTE 1

1

4 13

24 26

2 7

5

13 3

23

15

8 22

9 10

12

13 21

3

6 16

25

17

14 19 20 11

27

28 18 20 OLD STYLE

H

805-905

71

DIG BELT CLUTCH BEGINS WITH S/N - SEE FOOTNOTE 1 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

110-375 125-403 105-047 105-513 160-350 505-113 307-254 307-182 105-075 105-886 105-530 170-314 115-780 307-249 179-178 125-480 115-477 501-358 115-636 307-177 313-582 307-188 105-093 117-263 307-152 105-826 125-430 105-834

QTY

1 1 2 1 1 1 1 1 1 1 1 3 1 1 1 2 1 1 1 1 1 1 2 1 2

DESCRIPTION

KNOB (1/2-NC, YELLOW) BRONZE BUSHING (.625") LOCKNUT (3/8-NC) ROLL PIN (1/4" X 1-1/4") BALL JOINT (3/8-NF, RH) LOCKNUT (3/8-NF) DIG CAM DIG CLUTCH ROD LINKAGE BOLT (3/8-NC X 2") WASHER (.410") COTTER PIN (1/16" X 3/4 ") BELT ROLLER KLIP RING (.625") DIG CLUTCH MOUNT UPPER PIVOT PIN BRONZE BUSHING (.625" X 1.375") GRIP RING (.375") ROLL PIN (3/32" X 3/4 ") COMPRESSION SPRING DIG CLUTCH RETURN ROD DIG CLUTCH RETURN ROD DIG CLUTCH NUT (3/8-NF) COMPRESSION SPRING DIG CONTROL LEVER FLG LK BOLT (3/8-NC X 1") BRONZE BUSHING (.502") FLG LOCKNUT (3/8-NC)

REMARKS

ENDS WITH S/N 1W1668(1030). ENDS WITH S/N 1W1561(1230)

BEGINS WITH S/N 1W1669(1030). BEGINS WITH 1W1562(1230) ENDS WITH S/N 1W1668(1030). ENDS WITH S/N 1W1561(1230) ENDS WITH S/N SEE FOOTNOTE 2 BEGINS WITH S/N 1W1669(1030). BEGINS WITH 1W1562(1230)

FOOTNOTES

1. BEGINS WITH S/N 1P3355 - 1030H BEGINS WITH S/N 1P3370 - 1030K BEGINS WITH S/N 1P3230 - 1230H BEGINS WITH S/N 1P3229 - 1230K 2. FOR REPLACEMENT ROD, ORDER KIT 599-262.

NOTE:

H

805-905

72

PUMP BELT CLUTCH ENDS WITH S/N - SEE FOOTNOTE 1

18 2 3

4 5 6

7 9 10 20 13

11 19 16 17

21 18

14

12 26 2

22 30 27

8

23

24

15 29 17 22

25 31 27 22

2

1

32 2 33 28

N

805-318

73

PUMP BELT CLUTCH ENDS WITH S/N - SEE FOOTNOTE 1 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

105-530 105-118 117-131 307-194 125-436 179-179 307-142 303-396 125-440 160-350 307-160 110-458 307-145 105-093 307-147 179-178 117-132 106-255 105-509 105-547 505-113 170-247 105-047 105-525 105-150 307-140 105-886 115-503 501-358 117-130 117-129 307-165 125-403 117-019 307-154

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

QTY

1 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 3 1 1 1 1 2 1 1 1 1 1 1 1

DESCRIPTION

COTTER PIN (1/16" X 3/4") WASHER (3/8") COMPRESSION SPRING TOP TOWER BRONZE BUSHING (.376") BAIL LOCK PIN BAIL SHAFT BAIL SHAFT BRONZE BUSHING (.625") BALL JOINT (3/8-NF, RH) PUMP CAM CLEVIS PIN (3/8" X 1.267") PUMP CAM LATCH PLATE NUT (3/8-NF) PUMP CLUTCH ROD LINKAGE UPPER PIVOT PIN LATCH SPRING WASHER (.406") COTTER PIN (.125" X 1.000") ROLL PIN (5/16" X 1-1/4") LOCKNUT (3/8-NF) SHEAVE (1/3V-.375") LOCKNUT (3/8-NC) ROLL PIN (3/16" X 1-1/4") BOLT (3/8-NC X 1-3/4") OUTER PUMP ARM WASHER (.410") KLIP RING (3/4") ROLL PIN (3/32" X 3/4") COMPRESSION SPRING COMPRESSION SPRING INNER PUMP ARM BRONZE BUSHING (.625") COMPRESSION SPRING PUMP RETURN ROD

REMARKS

ENDS WITH S/N 1S1141 BEGINS WITH S/N 1S1142

EARLY MODELS

FOOTNOTES

1.

ENDS WITH S/N IP3354 - 1030H ENDS WITH S/N 1P3369 - 1030K ENDS WITH S/N 1P3229 - 1230H ENDS WITH S/N 1P3228 - 1230K

NOTE:

N

805-318

74

PUMP BELT CLUTCH

BEGINS WITH S/N - SEE FOOTNOTE 1

18 2 3

4 5 6

7 9 10 32

20

13

19 16 21

34 14

11

12

26 2

22 30 27

8

23

24

15 29 17 22

25 31 27

35

22 29 2 1

33 35

33

M

OLD STYLE

28

805-906

75

PUMP BELT CLUTCH

BEGINS WITH S/N - SEE FOOTNOTE 1 REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

NO.

NUMBER

QTY DESCRIPTION

REMARKS

1.

2.

3.

4.

5.

6.

7.

105-530 105-118 117-131 307-194 125-436 179-179 307-142 303-396 125-440 160-350 307-160 105-523 307-145 105-093 307-169 179-178 117-132 184-191 105-509 105-547 505-113 170-247 105-047 105-525 105-150 307-140 105-886 115-780 501-358 117-263 307-173 125-403 110-458 307-187 178-835 105-118 115-477

3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 2 3 1 1 1 1 1 3

ENDS WITH S/N 1W1668(1030) AND S/N 1W1561(1230).

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

COTTER PIN (1/16" X 3/4") WASHER (3/8") COMPRESSION SPRING TOP TOWER BRONZE BUSHING (.376") BAIL LOCK PIN BAIL SHAFT BAIL SHAFT BRONZE BUSHING (.625") BALL JOINT (3/8-NF, RH) PUMP CAM COTTER PIN (.125" X .750") PUMP CAM LATCH PLATE NUT (3/8-NF) PUMP CLUTCH ROD LINKAGE UPPER PIVOT PIN LATCH SPRING SPACER COTTER PIN (.125" X 1.000") ROLL PIN (5/16" X 1-1/4") LOCKNUT (3/8-NF) SHEAVE (1/3V-.375") LOCKNUT (3/8-NC) ROLL PIN (3/16" X 1-1/4") BOLT (3/8-NC X 1-3/4") OUTER PUMP ARM WASHER (.410") KLIP RING (.625") ROLL PIN (3/32" X 3/4") COMPRESSION SPRING INNER PUMP ARM BRONZE BUSHING (.625") CLEVIS PIN (3/8", 1.267") PUMP RETURN ROD PUMP RETURN ROD WASHER (3/8") GRIP RING (.375")

ENDS WITH S/N 1S1141 BEGINS WITH S/N 1S1142 1030, 1S1186 1230

ENDS WITH S/N 1W1668(1030) AND 1W1561(1230).

ENDS WITH S/N 1W1668(1030) & S/N 1W1561(1230) SEE FT 2 BEGINS WITH S/N 1W1669(1030) & S/N 1W1562(1230) BEGINS WITH S/N 1W1669 (1030) & S/N 1W1562(1230)

FOOTNOTES

1. BEGINS WITH S/N 1P3355 - 1030H BEGINS WITH S/N 1P3370 - 1030K BEGINS WITH S/N 1P3230 - 1230H BEGINS WITH S/N 1P3229 - 1230K 2. FOR REPLACEMENT ROD, ORDER KIT 599-263.

NOTE:

M

805-906

76

NOTES:

ID0134963

77

HYDRAULICS

78

79

80

PUMP & RESERVOIR HYDRAULICS

8

9 7 27 10

17

16

3

15

20

21

6

28

4

17

5

11 24

6 12 13

30

22

6 6

26

18

32 31

23 19 29

14

TO THERMAL RELIEF

25

2

11

1

ID0127945

81

PUMP & RESERVOIR HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

QTY

DESCRIPTION

105-048 2 BOLT (1/2-NC X 1-1/2") 105-065 2 LOCKNUT (1/2-NC) 105-836 2 FLG LK BOLT (1/4-NC X 1/2") 105-826 2 FLG LK BOLT (3/8-NC X 1") 105-834 2 FLG LOCKNUT (3/8-NC) 110-026 4 WORM CLAMP (1/2" TO 1-1/4") 110-628 1 SNAP-ON CLAMP (.468" TO .531") 110-426 1 DIPSTICK 110-488 1 FILLER TUBE 115-381 AR BULK HOSE (1/4", SOLD PER 1") 116-748 1 SUCTION HOSE (3/4" X 29.6") 116-749 1 SUCTION HOSE (3/4" X 9") 154-005 2 CONNECTOR (08J-08S) 154-060 2 CONNECTOR (08J-06S90) 154-154 1 CONNECTOR (08J-08S45) 154-576 1 HOSE (08JFX-22.5"-2000) 155-174 2 S/O COUPLER (12S-12H90) 155-125 1 PLUG (04S) 154-362 1 S/O COUPLER (10S-12H90) 158-598 1 HYD CONTROL VALVE (1-SPOOL) 159-386 1 FILTER HEAD (12SF-12SF) 155-930 1 HYD OIL FILTER (12SF-12SF) 156-852 1 HYD LINE (-08) 156-853 1 HYD LINE (-08) 156-435 1 SUPPLY TUBE (12S-12H-6") 158-312 1 HYD PUMP 153-578 1 HYD PUMP 307-046 1 MOUNT BRACKET 115-320 1 GROMMET (1-1/2") 364-022 1 HYD RESERVOIR 116-342 4 MOUNT PAD 155-910 1 FILTER ELEMENT (1-UNF) 514-364 1 BRANCH TEE (08S-06O-08J) 154-111 1 UNION (08J-08JFX90)

REMARKS

USE 1 @ 10"

TORQUE TO 20 FT. LBS

TORQUE TO 10 FT. LBS

OBSOLETE INCL REF 30, EARLIER MODELS TORQUE TO 25 FT. LBS OBSOLETE PUMP MODEL # 15-2176 PUMP MODEL # 15-2298

NOT SHOWN:

FOOTNOTES:

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

11

ID0127945

82

83

84

PIVOT HYDRAULICS

6 2 15

1 8

4

17 11 3 19

14

12

18 10

5

9 16 7

20

10

13

21

13

7 11

TO CASE DRAIN ON PUMP

K

805-535

85

PIVOT HYDRAULICS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

105-047 105-118 105-224 105-805 105-085 110-374 125-435 130-101 151-115 154-076 154-057 115-663 154-592 181-600 307-170 125-713 105-095 158-598 514-350 514-362 149-038

QTY

1 2 2 2 2 1 2 1 1 2 2 1 2 2 1 1 2 1 1 1 1

DESCRIPTION

LOCKNUT (3/8-NC) WASHER (3/8") BOLT (1/4-NC X 2-1/2") BELLEVILLE WASHER (3/8") LOCKNUT (1/4-NC) KNOB (1/2-NC, GREEN) COMPOSITION BUSHING (1.375") CONNECTOR LINK (#50) CYL (3.0" X 1.187" X 7.250") CONNECTOR (06J-06S) CONNECTOR (06J-06S90) GROMMET EDGE (1/4" X 12.7") HOSE (06JFX-45"-2250) GUIDE RETAINER LEVER CLEVITE BUSHING (1.375") WASHER (1/4") HYD CONTROL VALVE (1-SPOOL) BRANCH TEE (06SF-06JF-06J) FLOW CHECK (16O-16O) HOSE (06OFX45-14"-3000)

REMARKS

USE 1 @ 6.4"

FOOTNOTES

NOTE:

REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.

K

805-535

86

87

88

89

90

91

92

NOTES:

ID0134963

93

ELECTRICAL

94

95

96

97

98

99

100

101

102

TACHOMETER OPTION

2

1

1

04

ID0114180

103

TACHOMETER OPTION REF PART NO. NUMBER

1.

2.

QTY

217-567 1 214-519 1 190-1790 1 362-909 -

DESCRIPTION

TACHOMETER TACHOMETER TACHOMETER/HOUR METER KIT LEFT ENGINE COVER

REMARKS

SUPERESEEDED 214-519 AND ASSOC. HARDWARE

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0114180

104

NOTES:

ID0134963

105

ACCESSORIES

106

PIVOT - 6" STANDARD

1 18 3

8 2

22

4 5

8 18

17

16

19 21

6

23

15 24

28

20 7 10 9

30

11 29

6 27

14 9

26

13 12

27

25

26

19

ID0035604

107

PIVOT - 6" STANDARD REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

QTY

DESCRIPTION

166-160 1 GEARBOX 166-506 1 GEARBOX 107-244 3 FLG LK BOLT (3/8-NC X 1", NLK) 170-144 1 SHEAVE (2/3V-5.600"-SH) 165-978 1 KEY (3/16" X 1.3") 170-258 1 SHEAVE BUSHING (.625"-SH) 170-163 BOLT GROUP KIT 115-003 2 ZERK (1/4-NF, STR) 116-761 1 INTERNAL SNAP RING (3.333") 105-258 4 BOLT (3/8-NC X 3-3/4") 142-039 1 SPROCKET (1.654"A10 SPLIT) 301-1871 1 SPROCKET 10T (1.686 2.160 ID) 140-703 1 SPROCKET (1.654"B9) 165-985 1 KEY (1/4" X 2-1/4") 106-197 1 BOLT (1/2-NC X 2-1/2", GD8) 145-309 1 SPOILS AUGER 320-267 1 SPOILS AUGER 106-301 1 LOCKNUT (1/2-NC, NLK) 105-701 2 SET SCREW (5/16-NC X 3/8", CUP) 307-210 1 PIVOT (6") 319-414 1 PIVOT (6") 115-483 1 KLIP RING (1.25") 307-130 FRAME 105-834 4 FLG LOCKNUT (3/8-NC) 307-209 4 SLIDE PAD 117-601 1 THRUST WASHER 105-696 1 THRST WSHR (3.587") 107-951 4 POP RIVET (3/16" X .550") 151-115 - CYL (3.0" X 1.187" X 7.250") 157-232 1 SEAL, V-RING (3.86-4."14") 156-996 1 O-RING 342 "X" STYLE CROSSSCT 141-677 1 SPROCKET HUB 106-794 6 BOLT (3/8-NC X 1-3/4",SOC, GD8) 105-287 6 LOCKNUT (3/8-NC) 105-833 1 FLG LOCKNUT (1/2-NC) 105-076 1 BOLT (1/2-NC X 3") 141-282 1 RESTRAINT BAR (24") 141-318 1 RESTRAINT BAR (30") 141-155 1 RESTRAINT BAR (36")

REMARKS

ENDS WITH S/N 1X0437 BEGINS WITH S/N 1X0438

STANDARD OPTIONAL SPROCKET FOR SANDY SOIL OPTIONAL

ENDS WITH S/N 1X0437 BEGINS WITH S/N 1X0438 FOOTNOTE 1 ENDS WITH S/N 1X0437 BEGINS WITH S/N 1X0438

BEGINS WITH S/N 1S0383

BEGINS WITH S/N 1S0383 BEGINS WITH S/N 1S0383 BEGINS WITH S/N 1X0438 BEGINS WITH S/N 1X0438 BEGINS WITH S/N 1X0438 BEGINS WITH S/N 1X0653 BEGINS WITH S/N 1X0653 BEGINS WITH S/N 1X0653 BEGINS WITH S/N 1X0653 BEGINS WITH S/N

NOT SHOWN:

FOOTNOTES:

1. USED ON EARLY UNITS

NOTE:

19

ID0035604

108

PIVOT - 8" OPTIONAL 1230

1 18 3

8 2

22

4 5

8 18

23

17 16

19 21

25

6

26 7

15

9

10

11

20 24

14

13 12

K

805-597

109

PIVOT - 8" OPTIONAL 1230 REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

166-167 107-244 170-144 165-978 170-258 170-163 115-003 116-761 105-258 140-703 165-985 106-197 145-309 106-301 105-701 307-230 115-483 184-993 105-834 307-209 117-601 105-696 107-951 151-115 307-130 307-235 157-232 156-996

QTY

1 3 1 1 1 1 1 4 1 1 1 1 1 2 1 1 1 4 3 1 1 3 1 1 1

DESCRIPTION

GEARBOX FLG LK BOLT (3/8-NC X 1", NLK) SHEAVE (2/3V-5.600"-SH) KEY (3/16" X 1.3") SHEAVE BUSHING (.625"-SH) BOLT GROUP KIT ZERK (1/4-NF, STR) INTERNAL SNAP RING (3.333") BOLT (3/8-NC X 3-3/4") SPROCKET (1.654" B9) KEY (1/4" X 2-1/4") BOLT (1/2-NC X 2-1/2", GD8) SPOILS AUGER LOCKNUT (1/2-NC, NLK) SET SCREW (5/16-NC X 3/8", CUP) PIVOT ASS'Y 8" KLIP RING (1.25") PIVOT ARM BUSHING FLG LOCKNUT (3/8-NC) SLIDE PAD THRUST WASHER THRST WSHR 4.5OD X 3.578ID X .06 TH POP RIVET (3/16" X .550") CYLINDER (3.0" X 1.187" X 7.250") FRAME 8" PIVOT SPACER SEAL, V-RING (3.86-"4.14") O-RING (___0__)

REMARKS

BEGINS WITH S/N 1S0383

BEGINS WITH S/N 1S0383 BEGINS WITH S/N 1S0383

FOOTNOTES

NOTE:

K

805-597

110

GEARBOX

1 22

20

3

2

4

19

5

7

4

18

6 8

17

9 10 11

16

12 8

13 14 15 21

H

805-521

111

GEARBOX REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

166-160 166-506 105-150 115-251 110-629 125-030 167-168 157-510 165-141 125-056 165-985 169-087 105-834 115-779 501-348 181-684 155-858 167-326 166-498 115-513 169-034 115-289 155-912 184-993 105-836

QTY

2 1 2 2 1 1 1 2 1 1 2 1 1 1 1 1 1 1 1 2 1 1 2

DESCRIPTION

GEARBOX GEARBOX BOLT (3/8-NC X 1-3/4") REDUCER (06N-02NF) MACHINERY BUSHING (1.250") BALL BEARING (.669") INPUT SHAFT INTERNAL SEAL (.625") DRIVEN GEAR BALL BEARING (1.378") KEY (1/4" X 2-1/4") GEARBOX HOUSING FLG LOCKNUT (3/8-NC) FRICTION WASHER (2.840") O-RING (126 D70) DIRT SHIELD INTERNAL SEAL (1.875") HEADSHAFT HEADSHAFT EXTERNAL SNAP RING (1.375") GEARBOX COVER PLATE PLUG (06N) AIR VENT (02N) PIVOT ARM BUSHING FLG LOCK BOLT (1/4-NC X 1/2")

REMARKS

ENDS WITH S/N 1X0437 BEGINS WITH S/N 1X0438

ENDS WITH S/N 1X0437 BEGINS WITH S/N 1X0438

FOOTNOTES

NOTE:

H

805-521

112

113

114

OUTBOARD BEARING - 6" STANDARD

7 8 8

10

9 2 3 11 13 6 5 1 4

N

12

803-784

115

OUTBOARD BEARING - 6" STANDARD REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

190-582 307-250 320-264 125-005 115-514 115-513 105-475 105-045 307-202 320-265 105-845 105-826 105-825 145-309 320-267 166-160 166-506 305-483 157-904

QTY

1 1 1 1 1 1 1 1 1 1 7 3 4 1 1

DESCRIPTION

OUTBOARD BRNG CONVERSION KIT BEARING SUPPORT BEARING SUPPORT BALL BEARING (1.378") INTERNAL SNAP RING (2.812") EXTERNAL SNAP RING (1.375") WASHER (1/2") LOCK BOLT (1/2-NC X 1-1/4", NLK) BEARING ARM BRACKET BEARING ARM BRACKET FLG LOCKNUT (3/8-NC) FLG LOCK BOLT (3/8-NC X 1") FLG LOCK BOLT (3/8-NC X 3/4") SPOILS AUGER SPOILS AUGER GEARBOX GEARBOX GREASE CAP (5500-7000#) HOLE PLUG (2-1/2")

REMARKS

INCL REF NO'S 1 - 10 & 13 ENDS WITH S/N 1X0437 BEGINS WITH S/N 1X0438

ENDS WITH S/N 1X0437 BEGINS WITH S/N 1X0438

ENDS WITH S/N 1X0437 BEGINS WITH S/N 1X0438 ENDS WITH S/N 1X0437 BEGINS WITH S/N 1X0438 ENDS WITH S/N 1X0437 BEGINS WITH S/N 1X0438

FOOTNOTES

NOTE:

N

803-784

116

117

118

119

120

24"BOOM-1.654"P, 6.8" ROLLER ENDS WITH CMW S/N:

17 8 9 11

2

7

12

16 10

14

15

6 1

3

5

13

4

4

04

ID0148162

121

24"BOOM-1.654"P, 6.8" ROLLER ENDS WITH CMW S/N: REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

QTY

141-792 105-136 4 105-379 1 105-076 1 105-833 5 106-033 1 106-034 1 105-1125 1 115-464 1 125-009 1 141-786 1 142-755 1 142-754 180-445 1 141-325 1 141-282 1 115-157 1 115-003 1 115-001 1 105-1126 1

DESCRIPTION

ROLLER BOOM 24" BOLT (1/2-NC X 3-1/2", GD8) LK BOLT (3/4-NC X 1-1/4", NLK) BOLT (1/2-NC X 3") FLG LOCKNUT (1/2-NC) JAM NUT (1-NC) SET SCREW (1-NC X 6", SQ) DIRT SHIELD INTERNAL SNAP RING (3.149") BALL BEARING (1.125", SQ) ROLLER BOOM (24") TAIL ROLLER (1.654" C6.8") TAIL ROLLER (1.654" C6.8") IDLER SHAFT (1.125" SQ X 1.937") CLEANER SUPPORT RESTRAINT BAR (24") PLUG (02N, SOC) ZERK (1/4-NF, STR) ZERK (02N) DIRT SHIELD

REMARKS

INCL REF NO.'S 1, 2, 4 THRU 12, 15, 16 & DECAL

BOOM REQUIRES FOUR

INCL REF NO.'S 7, 8, 9, 11, & 17 ENDS WITH S/N

NOT SHOWN:

275-043

1

CHAIN TENSION DECAL

FOOTNOTES:

NOTE:

04

ID0148162

122

ROLLER BOOM

2 3

10

17 15

14

3

4 5

6

16

14 10 11 12

2 9 13 7

1

8 8

10

ID0148280

123

ROLLER BOOM REF PART NO. NUMBER

QTY

1 301-8280 2 105-1126 3 115-464 4 125-009 5 142-755 6 180-445 7 106-033 8 105-136 9 105-379 10 115-003 11 105-668 12 105-833 13 106-034 14 105-1125 15 140-1102 16 125-1022 17 105-707

1 2 2 1 1 1 1 4 1 2 1 4 1 2 1 1 1

DESCRIPTION

ROLLER BOOM (24") DIRT SHIELD INTERNAL SNAP RING (3.149") BALL BEARING (W/051-345 INSTR) TAIL ROLLER (1.654"C6.8") IDLER SHAFT (1.125"SQ X1.937") JAM NUT (1-NC) BOLT (1/2-NC X 3-1/2", GD8) LK BOLT (3/4-NC X 1-1/4", NLK) ZERK (1/4-NF, STR) SET SCREW (1/4-NF X 1/4", CUP) FLG LOCKNUT (1/2-NC) SET SCREW (1-NC X 6", SQ) DIRT SHIELD TAIL ROLLER - RELUBRICABLE BALL BEARING RELUBRICABLE (1.125", SQ) SET SCREW (1/4-NF X 3/8", CUP)

REMARKS

301-8211 (30"), 301-8215 (36"), 301-8202 (42"), 301-8238 (42") - F/N 2 EACH ROLLER ASSEMBLY REQUIRES ONE 105-1126 - SEE F/N 1 & 3 EACH ROLLER ASSEMBLY REQUIRES ONE 115-464 - SEE F/N 1 & 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1 FOR QTY= 1

EACH ROLLER ASSEMBLY REQUIRES ONE 105-1125 - SEE F/N 1 & 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

141-792 141-793 141-791 140-1240 140-531 140-1112 140-1113 140-1111 140-1285 140-1106

ROLLER BOOM ASSEMBLY (24") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (30") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (36") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (42") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (48") W/STD. ROLLER 142-754 ROLLER BOOM ASSEMBLY (24") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (30") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (36") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (42") W/RELUBRICABLE ROLLER 140-1104 ROLLER BOOM ASSEMBLY (48") W/RELUBRICABLE ROLLER 140-1104

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 2 &3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3

FOOTNOTES:

1. 142-754 TAIL ROLLER ASSEMBLY, INCL. REF #'S 2-5, 14 2. 141-792 ROLLER BOOM ASSEMBLY (24"), INCL. REF #'S 1-14 141-793 ROLLER BOOM ASSEMBLY (30"), INCL. REF #'S 1-14 141-791 ROLLER BOOM ASSEMBLY (36"), INCL. REF #'S 1-14 140-1240 ROLLER BOOM ASSEMBLY (42"), INCL. REF #'S 1-14 140-531 ROLLER BOOM ASSEMBLY (48"), INCL. REF #'S 1-14 140-1112 ROLLER BOOM ASSEMBLY (24"), INCL. REF #'S 1-3 & 6-17 140-1113 ROLLER BOOM ASSEMBLY (30"), INCL. REF #'S 1-3 & 6-17 140-1111 ROLLER BOOM ASSEMBLY (36"), INCL. REF #'S 1-3 & 6-17 140-1285 ROLLER BOOM ASSEMBLY (42"), INCL. REF #'S 1-3 & 6-17 140-1106 ROLLER BOOM ASSEMBLY (48"), INCL. REF #'S 1-3 & 6-17 3. 140-1104 TAIL ROLLER ASSEMBLY-RELUBRICALBLE INCL'S REF #'S: 2, 3, 10 & 14 THRU 17.

NOTE:

10

ID0148280

124

LOW PROFILE SPROCKET BOOM

3

2

16

15

14 4 6 3

14 10

10 5

12

2

9 13 7 1 8

01

11

ID0336937

125

LOW PROFILE SPROCKET BOOM REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 ROLLER BOOM (24") 2 DIRT SHIELD 2 INTERNAL SNAP RING (3.149") 1 BALL BEARING (W/051-345 INSTR) 1 LOW PROFILE SPROCKET, SEALED 1 IDLER SHAFT (1.125"SQ X1.937") 1 JAM NUT (1-NC) 4 FLG LOCKNUT (1/2-NC) 1 LK BOLT (3/4-NC X 1-1/4", NLK) 2 ZERK (1/4-NF, STR) 1 CHAIN TENSION 4 BOLT (1/2-NC X 2-3/4") 1 SET SCREW (1-NC X 6", SQ) 2 DIRT SHIELD 1 LOW PROFILE SPROCKET, GREASABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ)

301-8280 105-1126 115-464 125-009 140-1298 180-445 106-033 105-833 105-379 115-003 275-043 105-067 106-034 105-1125 140-1299 125-1022

DESCRIPTION

REMARKS

301-8211 (30") 301-8215 (36") 301-8202 (42") 301-8238 (48") - F/N 2 EACH ROLLER ASSY REQUIRES ONE 105-1126 - SEE F/N 1 & 3 EACH ROLLER ASSY REQUIRES ONE 115-464 - SEE F/N 1 & 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

SEE FOOTNOTE 1, QTY = 1 PER ROLLER AND 1 PER BOOM

EACH ROLLER ASSY REQUIRES ONE 105-1125 - SEE F/N 1 & 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

140-1302 140-1287 140-1288 140-1304 140-1306 140-1303 140-1292 140-1293 140-1305 140-1307

LOW PROFILE SPROCKET BOOM, SEALED (24") LOW PROFILE SPROCKET BOOM, SEALED (30") LOW PROFILE SPROCKET BOOM, SEALED (36") LOW PROFILE SPROCKET BOOM, SEALED (42") LOW PROFILE SPROCKET BOOM, SEALED (48") LOW PROFILE SPRKT BOOM,GREASABLE (24") LOW PROFILE SPRKT BOOM,GREASABLE (30") LOW PROFILE SPRKT BOOM,GREASABLE (36") LOW PROFILE SPRKT BOOM,GREASABLE (42") LOW PROFILE SPRKT BOOM,GREASABLE (48")

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3

FOOTNOTES:

1- 140-1289 LOW PROFILE SPROCKET ASSY, SEALED, INCL REF #'S 2-5 AND 14 2- 140-1302 LOW PROFILE SPROCKET BOOM, SEALED (24"), INCL REF #'S 1-14 140-1287 LOW PROFILE SPROCKET BOOM, SEALED (30"), INCL REF #'S 1-14 140-1288 LOW PROFILE SPROCKET BOOM, SEALED (36"), INCL REF #'S 1-14 140-1304 LOW PROFILE SPROCKET BOOM, SEALED (42"), INCL REF #'S 1-14 140-1306 LOW PROFILE SPROCKET BOOM, SEALED (48"), INCL REF #'S 1-14 140-1303 LOW PROFILE SPROCKET BOOM, GREASABLE (24"), INCL REF #'S 1-3,6-16 140-1292 LOW PROFILE SPROCKET BOOM, GREASABLE (30"), INCL REF #'S 1-3,6-16 140-1293 LOW PROFILE SPROCKET BOOM, GREASABLE (36"), INCL REF #'S 1-3,6-16 140-1305 LOW PROFILE SPROCKET BOOM, GRESABLE (42"), INCL REF #'S 1-3,6-16 140-1307 LOW PROFILE SPROCKET BOOM, GREASABLE (48"), INCL REF #'S 1-3,6-16 3- 140-1290 LOW PROFILE SPROCKET ASSY, GREASABLE, INCL REF #'S 2,3,10,14-16 NOTE:

01

ID0336937

126

3.0" BOOM - 1.654" P, 6.8" ROLLER ENDS WITH S/N

17 8

9

11

2

16

7

12

10

14

15 6

3

5

1 4

4

13

04

ID0148173

127

3.0" BOOM - 1.654" P, 6.8" ROLLER ENDS WITH S/N REF PART NO. NUMBER

QTY

DESCRIPTION

141-793 BOLT(30") (1/2-NC X 3-1/2", GD8) 143-093 ROLLER4BOOM 1. 105-136 4 BOLT (1/2-NC X 3-1/2", GD8) 2. 105-379 1 LK BOLT (3/4-NC X 1-1/4", NLK) 3. 105-076 1 BOLT (1/2-NC X 3") 4. 105-833 5 FLG LOCKNUT (1/2-NC) 5. 106-033 1 JAM NUT (1-NC) 6. 106-034 1 SET SCREW (1-NC X 6", SQ) 7. 105-1125 1 DIRT SHIELD 8. 115-464 1 INTERNAL SNAP RING (3.149") 9. 125-009 1 BALL BEARING (1.125", SQ) 10. 141-787 1 ROLLER BOOM (30") 11. 142-755 1 TAIL ROLLER (1.654" C 6.8") 142-754 TAIL ROLLER (1.654"C 6.8") 12. 180-445 1 IDLER SHAFT (1.125" SQ X 1.937") 13. 141-325 1 CLEANER SUPPORT 303-759 1 6" PIVOT 14. 141-318 1 RESTRAINT BAR (30") 15. 115-157 1 PLUG (02N, SOC) 16. 115-003 2 ZERK (1/4-NF, STR) 115-001 2 ZERK (02N) 17. 105-1126 1 DIRT SHIELD

REMARKS

INCL REF NO.'S 1, 2, 4 THRU 12, 15, 16 & DECAL

BOOM REQUIRES FOUR

INCL REF NO.'S 7, 8, 9, 11, & 17 ENDS WITH S/N ______ BEGINS WITH S/N ______

EARLY STYLE

NOT SHOWN:

275-043

1

CHAIN TENSION DECAL

FOOTNOTES:

NOTE:

04

ID0148173

128

36" BOOM - 1.654" P. ROLLER 6.8" ENDS WITH S/N

17 8 9 11

2

7

16

12 10 14

15

6

3

5

1

4 4

13

08

ID0148222

129

36" BOOM - 1.654" P. ROLLER 6.8" ENDS WITH S/N REF PART NO. NUMBER

QTY

DESCRIPTION

141-791 ROLLER BOOM (36") 1. 105-136 4 BOLT (1/2-NC X 3-1/2", GD8) 2. 105-379 1 BOLT (3/4-NC X 1-1/4") 3. 105-076 1 BOLT (1/2-NC X 3") 4. 105-833 5 FLG LOCKNUT (1/2-NC) 5. 106-033 1 JAM NUT (1-NC) 6. 106-034 1 SET SCREW (1-NC X 6", SQ) 7. 105-1125 1 DIRT SHIELD 8. 115-464 1 INTERNAL SNAP RING (3.149") 9. 125-009 1 BALL BEARING (1.125" SQ) 10. 141-785 1 ROLLER BOOM (36") 11. 142-755 1 TAIL ROLLER (1.654"P, 6.8") 142-754 TAIL ROLLER (1.654"P, 6.8") 12. 180-445 1 IDLER SHAFT 13. 141-325 1 RESTRAINT SUPPORT 303-759 1 6" PIVOT 14. 141-155 1 RESTRAINT BAR (36") 15. 115-157 1 PLUG (02N, ALN) 16. 115-003 1 ZERK (1/4-NF, STR) 115-001 2 ZERK (02N) 17. 105-1126 1 DIRT SHIELD

REMARKS

INCL REF NO.'S 1, 2, 4 THRU 12, 16, 17 & DECAL

BOOM REQUIRES FOUR

INCL REF NO.'S 7, 8, 9, 11 AND 17 ENDS WITH S/N 1X0652 BEGINS WITH S/N 1X0653

EARLY STYLE

NOT SHOWN:

275-043 1 CHAIN TENSION DECAL

FOOTNOTES:

NOTE:

08

ID0148222

130

24" SPLIT BOOM ASSY

5

3

11

4 6

10

12 7

8 22

19

15

23

17 2

1 14

18

18

21

16

13

16

20

17

9 24

18

16

15

17 16

25

18

FOOTNOTE 4 21

FOOTNOTE 3 17 06

23 ID0160966

131

24" SPLIT BOOM ASSY REF PART NO. NUMBER

QTY

1 140-1158 2 105-136 3 300-2687 4 300-2685 5 105-833 6 105-975 7 105-310 8 106-073 9 106-212 10 300-2686 11 106-301 12 105-357 13 105-076 14 300-2688 15 125-009 16 105-1126 17 105-1125 18 115-464 19 142-755 20 140-1102 21 125-1022 22 105-707 23 115-003 24 140-1298 25 140-1299

2 ABRASION RESISTANT SPLIT BOOM, 24" 4 BOLT (1/2-NC X 3-1/2", GD8) 2 SPACER 1 ADJUSTMENT BLOCK 4 FLG LOCKNUT (1/2-NC) 3 WASHER (3/4") 1 JAM NUT (3/4-NC) 1 BOLT (3/4-NC X 6") 1 BOLT (5/8-NC X 3-1/2") 2 TUBE SPACER 2 LOCKNUT (1/2-NC, NLK) 1 LOCKNUT (5/8-NC) 2 BOLT (1/2-NC X 3") 1 IDLER BLOCK 1 BALL BEARING (W/051-345 INSTR) 2 DIRT SHIELD 2 DIRT SHIELD 2 INTERNAL SNAP RING (3.149") 1 TAIL ROLLER (1.654"C6.8") 1 TAIL ROLLER - RELUBRICABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 SET SCREW (1/4-NF X 3/8", CUP) 1 ZERK (1/4-NF, STR) 1 LOW PROFILE SPROCKET, SEALED 1 LOW PROFILE SPROCKET, GREASABLE

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 4 SEE FOOTNOTE 3

NOT SHOWN:

140-1162 140-1122 140-1101 140-1310

24" SPLIT BOOM ASSY, ROLLER RELUBRICABLE - 24" SPLIT BOOM ASSY, ROLLER 24" SPLIT BOOM ASSY, SPROCKET-GREASEABLE 24" SPLIT BOOM ASSY, SPROCKET-SEALED

INCLUDES REF. #'S 1-19 INCLUDES REF. #'S 1-13, 14, 16, 17, 18 & 20-23.

INCLUDES REF. #'S 1-14, 16-18 21,23 & 25 INCLUDES REF. #'S 1-18 & 24

FOOTNOTES:

1. 142-754 TAIL ROLLER (1.654"C6.8") INCLUDES REF NO.'S, 15-19.

2. 140-1104 TAIL ROLLER RELUBRICABLE INCLUDES REF NO.'S, 16-18, & 20-23.

3. 140-1290 LOW PROFILE SPROCKET ASSY, GREASEABLE - INC'L REF #'S 16, 17, 18, 21 & 23.

4. 140-1289 LOW PROFILE SPROCKET ASSY, SEALED - INC'L REF #'S 15, 16, 17 & 18

NOTE:

06

ID0160966

132

30" SPLIT BOOM ASSY

5

3 11 4 6

12 7 8

10

16 22 23

15 14 2

17

1 18

13 16

18

21 17

9

24

18

19

20

16

15

17 16

25

18

FOOTNOTE 4

21

17 05

FOOTNOTE 3 23 ID0169774

133

30" SPLIT BOOM ASSY REF PART NO. NUMBER

QTY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

2 ABRASION RESISTANT SPLIT BOOM, 30" 4 BOLT (1/2-NC X 3-1/2", GD8) 2 SPACER 1 ADJUSTMENT BLOCK 4 FLG LOCKNUT (1/2-NC) 3 WASHER (3/4") 1 JAM NUT (3/4-NC) 1 BOLT (3/4-NC X 6") 1 BOLT (5/8-NC X 3-1/2") 2 TUBE SPACER 2 LOCKNUT (1/2-NC, NLK) 1 LOCKNUT (5/8-NC) 2 BOLT (1/2-NC X 3") 1 IDLER BLOCK 1 BALL BEARING (W/051-345 INSTR) 2 DIRT SHIELD 2 DIRT SHIELD 2 INTERNAL SNAP RING (3.149") 1 TAIL ROLLER (1.654"C6.8") 1 TAIL ROLLER - RELUBRICABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 SET SCREW (1/4-NF X 3/8", CUP) 1 ZERK (1/4-NF, STR) 1 LOW PROFILE SPROCKET, SEALED 1 LOW PROFILE SPROCKET, GREASABLE

140-1161 105-136 300-2687 300-2685 105-833 105-975 105-310 106-073 106-212 300-2686 106-301 105-357 105-076 300-2688 125-009 105-1126 105-1125 115-464 142-755 140-1102 125-1022 105-707 115-003 140-1298 140-1299

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 4

NOT SHOWN:

140-1163 140-1123 140-1100 140-1100

30" SPLIT BOOM ASSY, ROLLER RELUBRICABLE - 30" SPLIT BOOM ASSY, ROLLER 30" SPLIT BOOM ASSY, SPROCKET, GREASEABLE 30" SPLIT BOOM ASSY, SPROCKET, SEALED

INLC'S REF #1-19 INCLUDES REF. #'S 1-13, 14, 16, 17, 18 & 20-23.

INCLUDES REF. #'S 1-14 16-18, 21 ,23 & 25 INCLUDES REF. #'S 1-18 & 24

FOOTNOTES:

1. 142-754 TAIL ROLLER (1.654"C6.8") INCLUDES REF NO.'S 15-19.

2. 140-1104 TAIL ROLLER RELUBRICABLE INCLUDES REF NO.'S 16-18 & 20-23.

3. 140-1290 LOW PROFILE SPROCKET ASSY, GREASEABLE - INC'L REF #'S 16, 17, 18, 21 & 23.

4. 140-1289 LOW PROFILE SPROCKET ASSY, SEALED - INC'L REF #'S 15, 16, 17 & 18

NOTE:

05

ID0169774

134

36" SPLIT BOOM ASSEMBLY

2 1

13

3 1

4 6

9 7

10

8

10

15

19

5

17 17

18 22 23 11

14 16

14

12 24

18 21

18

17 20 16

16

25

21

15 FOOTNOTE 4

18

16

17

FOOTNOTE 3 23 01

ID0346834

135

36" SPLIT BOOM ASSEMBLY REF PART NO. NUMBER

QTY

1 140-1329 2 105-136 3 300-2687 4 300-2685 5 105-833 6 105-975 7 105-310 8 106-073 9 106-212 10 300-2686 11 106-301 12 105-357 13 105-076 14 300-2688 15 125-009 16 105-1125 17 105-1126 18 115-464 19 142-755 20 140-1102 21 125-1022 22 105-707 23 115-003 24 140-1298 25 140-1299

2 36" SPLIT BOOM SIDE 4 BOLT (1/2-NC X 3-1/2", GD8) 2 SPACER 1 ADJUSTMENT BLOCK 4 FLG LOCKNUT (1/2-NC) 3 WASHER (3/4") 1 JAM NUT (3/4-NC) 1 BOLT (3/4-NC X 6") 1 BOLT (5/8-NC X 3-1/2") 6 TUBE SPACER 6 LOCKNUT (1/2-NC, NLK) 1 LOCKNUT (5/8-NC) 6 BOLT (1/2-NC X 3") 1 IDLER BLOCK 1 BALL BEARING (W/051-345 INSTR) 1 DIRT SHIELD 1 DIRT SHIELD 1 INTERNAL SNAP RING (3.149") 1 TAIL ROLLER (1.654"C6.8") 1 TAIL ROLLER - RELUBRICABLE 1 BALL BEARING RELUBRICABLE (1.125", SQ) 1 SET SCREW (1/4-NF X 3/8", CUP) 1 ZERK (1/4-NF, STR) 1 LOW PROFILE SPROCKET, SEALED 1 LOW PROFILE SPROCKET, GREASABLE

DESCRIPTION

REMARKS

SEE FOOTNOTE 1 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 2 SEE FOOTNOTE 4 SEE FOOTNOTE 3

NOT SHOWN:

140-1334 140-1333 140-1328 140-1332

36" SPLIT BOOM ASSY, ROLLER-SEALED 36" SPLIT BOOM ASSY, ROLLER-GREASABLE 36" SPLIT BOOM ASSEMBLY, SPROCKET 36" SPLIT BOOM ASSY, SPROCKET, SEALED

INCLUDES REF. #'S 1-19 INCLUDES REF. #'S 1-13, 14, 16, 17, 18 & 20-23.

INCLUDES REF. #'S 1-14, 16-18 21,23 & 25 INCLUDES REF. #'S 1-18 & 24

FOOTNOTES:

1. 142-754 TAIL ROLLER (1.654"C6.8") INCLUDES REF NO.'S, 15-19.

2. 140-1104 TAIL ROLLER RELUBRICABLE INCLUDES REF NO.'S, 16-18, & 20-23.

3. 140-1290 LOW PROFILE SPROCKET ASSY, GREASEABLE - INC'L REF #'S 16, 17, 18, 21 & 23.

4. 140-1289 LOW PROFILE SPROCKET ASSY, SEALED - INC'L REF #'S 15, 16, 17 & 18

NOTE:

01

ID0346834

136

BOOM SPROCKET

7 4 3

2

5 2 4 6 1

01

ID0204806

137

BOOM SPROCKET REF PART NO. NUMBER

QTY

1 140-1098 2 125-007 3 115-013 4 105-416 5 300-7438 6 105-357 7 106-212

1 2 1 2 1 1 1

DESCRIPTION

REMARKS

SPROCKET ASSEMBLY, 14 TOOTH BALL BEARING ZERK (1\4-NF, STR) WASHER (5/8") BUSHING LOCKNUT (5/8-NC) BOLT (5/8-NC X 3-1/2")

NOT SHOWN:

FOOTNOTES:

NOTE:

01

ID0204806

138

GREASE BOOM

12 2 14

11

2

15

16

3 4

13

11

5

12

10

1

6 8

7

9

05

ID0148266

139

GREASE BOOM REF PART NO. NUMBER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

141-788 115-464 125-009 142-755 105-379 115-024 105-825 319-410 115-157 180-445 105-1125 105-1126 140-1102 125-1022 115-003 105-707

QTY

1 2 1 1 1 1 2 1 1 1 2 2 1 1 1 1

DESCRIPTION

GREASE BOOM (24") INTERNAL SNAP RING (3.149") BALL BEARING (W/051-345 INSTR) TAIL ROLLER (1.654"C6.8") LK BOLT (3/4-NC X 1-1/4", NLK) ZERK (02N, 5000) FLG LK BOLT (3/8-NC X 3/4) ZERK COVER PLUG (02N, SOC) IDLER SHAFT (1.125"SQ X1.937") DIRT SHIELD DIRT SHIELD TAIL ROLLER - RELUBRICABLE BALL BEARING RELUBRICABLE (1.125", SQ) ZERK (1/4-NF, STR) SET SCREW (1/4-NF X 3/8", CUP)

REMARKS

141-789 (30"), 141-790 (36"), SEE FOOTNOTE 2 EACH ROLLER ASSEMBLY REQUIRES ONE 115-464. - SEE FOOTNOTE 3 SEE FOOTNOTE 1 SEE FOOTNOTE 1

EACH ROLLER ASSEMBLY REQUIRES ONE 105-1125. - SEE FOOTNOTE 3 EACH ROLLER ASSEMBLY REQURIES ONE 105-1126. - SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3 SEE FOOTNOTE 3

NOT SHOWN:

141-794 141-795 141-796 140-1114 140-1115 140-1116

GREASE BOOM ASM (24")-W/STD. ROLLER 142-754 GREASE BOOM ASM (30")-W/STD. ROLLER 142-754 GREASE BOOM ASM (36")-W/STD. ROLLER 142-754 GREASE BOOM ASM (24")-W/RELUBRICABLE ROLLER 140-1104 GREASE BOOM ASM (30")-W/RELUBRICABLE ROLLER 140-1104 GREASE BOOM ASM (36")-W/RELUBRICABLE ROLLER 140-1104

SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 1 & 2 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3 SEE FOOTNOTE 2 & 3

FOOTNOTES:

1. 142-754 TAIL ROLLER ASSEMBLY INCL. REF #'S 2-4, 12 & 11.

2. 141-794 GREASE BOOM ASSEMBLY (24") INCL. REF #'S 1-12.

141-795 GREASE BOOM ASSEMBLY (30") INCL. REF #'S 1-12.

141-796 GREASE BOOM ASSEMBLY (36") INCL. REF #'S 1-12.

140-1114 GREASE BOOM ASSEMBLY (24"), RELUBRICALBLE, INCL. REF #'S 1-2 & 5-16.

140-1115 GREASE BOOM ASSEMBLY (30"), RELUBRICALBLE, INCL. REF #'S 1-2 & 5-16.

140-1116 GREASE BOOM ASSEMBLY (36"), RELUBRICALBLE, INCL. REF #'S 1-2 & 5-16.

3. 140-1104 TAIL ROLLER ASSEMBLY-RELUBRICALBE INCL'S REF #'S 2, 11-16.

NOTE:

05

ID0148266

140

GREASE CYLINDER

1 2

4 3

02

ID0113060

141

GREASE CYLINDER REF PART NO. NUMBER

1 2 3 4

151-221 157-059 157-762 157-759 155-723

QTY

1 1 1 1

DESCRIPTION

GREASE CYLINDER BACKUP RING (214 D90) ROD ASS'Y BARREL ASS'Y O-RING (214 D90)

REMARKS

INCL. REF NO.'S 1 THRU 4

NOT SHOWN:

FOOTNOTES:

NOTE:

02

ID0113060

142

TRENCH CLEANER - OPTIONAL

1

1

2

1

3 6 12

1

5

4

6 8

10

9

8

7

11

H

802-054

143

TRENCH CLEANER - OPTIONAL REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

100-180 105-065 320-425 141-287 141-290 141-134 105-279 141-289 107-262 141-288 105-076 141-284 141-319 141-325 319-414 115-809 116-709

QTY

7 1 1 1 1 2 2 4 2 1 1 1 1 1 2 2

DESCRIPTION

MECHANICAL CLEANER CONVERSION KIT LOCKNUT (1/2-NC) GRAB HANDLE SHOE BEAM CLEANER SHOE (4") CLEANER SHOE (6") CARRIAGE BOLT (1/2-NC X 3") REAR LINK BOLT (1/2-NC X 3-1/2", GD8) FRONT LINK BOLT (1/2-NC X 3") CLEANER BAR (24") CLEANER BAR (20") CLEANER SUPPORT 6" PIVOT EXTENSION SPRING (5.000") EXTENSION SPRING

REMARKS

INCL REF NO'S 1-3, 5-9, & 12

OPTIONAL OPTIONAL

OPTIONAL OPTIONAL OPTIONAL BEGINS WITH S/N 1X0653 EARLIER MODELS, ENDS WITH S/N 1X0564

FOOTNOTES

NOTE:

H

802-054

144

DIG CHAIN 1.654P33K2PS

12 2 11 10

13

2

1

9

14

1

3

4 8

6

5 7

08

ID0049672

145

DIG CHAIN 1.654P33K2PS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

QTY

105-099 AR 105-047 AR 137-003 AR 137-014 AR 137-015 AR 137-016 AR 137-018 AR 135-002 AR 135-1027 AR 137-005 AR 137-006 AR 135-007 AR 136-024 AR 135-1230 AR 136-025 AR 135-1231 AR 181-650 AR 181-651 AR 105-162 AR 105-183 AR

DESCRIPTION

REMARKS

BOLT (3/8-NC X 7/8") LOCKNUT (3/8-NC) ROLLER LINK (33K) 33K 2P DIG CHAIN 16P (2' 3") 33K 2P DIG CHAIN 52P (7' 4") 33K 2P DIG CHAIN 62P (8' 9") 33K 2P DIG CHAIN 92P (12' 11") DIG CHAIN PIN (33K) 33K MASTER PIN TOOTH SIDEBAR - KEY (33K) TOOTH SIDEBAR - HEAD (33K) LOCK KEY LEFT DIGGING TOOTH DURATOOTH, LEFT 3/16" 33/35K RIGHT DIGGING TOOTH DURATOOTH, RIGHT 3/16" 33/35K SPACER (1.395") SPACER (1.235") BOLT (3/8-NC X 2-1/4") BOLT (3/8-NC X 2-1/2", GD8)

SEE FOOTNOTE 1

USED ON OLD STYLE CHAINS WITH "D" SHAPED HOLE ON ONE SIDE. USE WITH NEW STYLE CHAINS HAVING ROUND HOLES ON BOTH SIDES.

SEE FOOTNOTE 4 SEE FOOTNOTE 4 SEE FOOTNOTE 2 SEE FOOTNOTE 3

NOT SHOWN:

133-029 133-030 133-031 133-033 131-295 133-080 133-081 133-082 133-043 133-044 133-045 133-039 133-040 133-041 133-042 131-298 133-054 133-049 133-050 133-051 133-052 131-299 133-060

33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P 33K 4P

DURA 52P 3.6 DURA 52P 4.4 DURA 52P 6.4 DURA 52P 10.0 DURA 60P 12.0 DURA 62P 3.6 DURA 62P 4.4 DURA 62P 6.4 DURA 68P 10.0 DURA 68P 12.0 DURA 68P 14.0 DURA 68P 3.6 DURA 68P 4.4 DURA 68P 6.4 DURA 68P 8.0 DURA 74P 8.0 DURA 84P 12.0 DURA 84P 3.6 DURA 84P 4.3 DURA 84P 6.4 DURA 84P 8.0 DURA 90P 6.0 DURA 100P 4.3

FOOTNOTES:

1. USED WITH NO CHAIN SPACER (SEE FOOTNOTE 2) 2. USED WITH ONE INSIDE TOOTH. 3. USED WITH ONE OUTSIDE TOOTH. 4. CHAIN SPACERS (REF NO'S 11 & 12) ARE USED ON LEAD BOLTS.

08

ID0049672

146

DIG CHAIN 1.654P33K4PS

6

12

2

12 1

15

14 2

16

12 1

5

1

1

2

1 11

1 17 14 13

10 12

15 8 1 16

9

7

4

3

09

ID0049673

147

DIG CHAIN 1.654P33K4PS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

QTY

105-047 AR 105-099 AR 135-002 AR 135-1027 AR 131-035 AR 105-162 AR 105-183 AR 135-007 AR 137-008 AR 137-009 AR 137-010 AR 137-011 AR 137-017 AR 136-025 AR 135-1231 AR 136-024 AR 135-1230 AR 105-098 AR 136-029 AR 105-075 AR 181-650 AR 181-651 AR

DESCRIPTION

LOCKNUT (3/8-NC) BOLT (3/8-NC X 7/8") DIG CHAIN PIN (33K) 33K MASTER PIN 33K DIG CHAIN STATION 2P BOLT (3/8-NC X 2-1/4") BOLT (3/8-NC X 2-1/2", GD8) LOCK KEY PLAIN SIDEBAR - KEY (33K) PLAIN SIDEBAR - HEAD (33K) 33K 4P DIG CHAIN 16P (2' 3") 33K 4P DIG CHAIN 52P (7' 4") 33K 4P DIG CHAIN 62P (8' 9") RIGHT DIGGING TOOTH DURATOOTH RIGHT 3/16" 33/35K LEFT DIGGING TOOTH DURATOOTH LEFT 3/16" 33/35K BOLT (3/8-NC X 3") TOOTH SPACER (1") BOLT (3/8-NC X 2") SPACER (1.395") SPACER (1.235")

REMARKS

SEE FOOTNOTE 3

USED ON OLD STYLE CHAINS WITH "D" SHAPED HOLE ON ONE SIDE. USE WITH NEW STYLE CHAINS HAVING ROUND HOLES ON BOTH SIDES. SEE FOOTNOTE 4 SEE FOOTNOTE 4

OBSOLETE OBSOLETE

OBSOLETE OBSOLETE SEE FOOTNOTE 1 FOR 6" WIDTHS SEE FOOTNOTE 2 SEE FOOTNOTE 2

NOT SHOWN:

FOOTNOTES:

1. USED WITH ONE INSIDE TOOTH AND CHAIN SPACER. 2. CHAIN SPACERS (REF NOS 16 AND 17) ARE USED ON LEAD BOLTS. 3. USED WITH NO CHAIN SPACER (SEE FOOTNOTE 4).

4. USED WITH ONE INSIDE TOOTH.

NOTE:

09

ID0049673

148

DIG CHAIN ALGTR1.654P33K2PS BO

6 3

2

8

7

4 6

6

5

4

1

6 9

5

2

5 9

13 10 5 4

10

6

4 4

11 12

NOTE: THIS PATTERN 4 TIMES. END WITH TWO BIT HOLDERS ON OUTSIDE.

09

ID0049675

149

DIG CHAIN ALGTR1.654P33K2PS BO REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

QTY

DESCRIPTION

133-150 33K 2P ALG B/O 52P 4.0 133-151 33K 2P ALG B/O 68P 4.0 137-015 1 33K 2P DIG CHAIN 52P (7' 4") 137-014 1 33K 2P DIG CHAIN 16P (2'3") 181-650 36 SPACER (1.395") 136-163 4 RIGHT BIT HOLDER 105-814 52 FLG LOCKNUT (3/8-NC) 500-003 36 BOLT (3/8-NC X 2-3/4") 136-164 18 CENTER BIT HOLDER 136-112 26 CLIP RETAINER 136-113 26 INSERT BIT - CARBIDE TIPPED 131-259 26 INSERT BIT - CARBIDE TIPPED 184-191 16 SPACER 105-162 16 BOLT (3/8-NC X 2-1/4") 135-007 AR LOCK KEY 135-002 AR DIG CHAIN PIN (33K) 135-1027 AR 33K MASTER PIN 136-165 4 LEFT BIT HOLDER

REMARKS

INCL REF NOS 1-6 AND 9-13 INCL REF NOS 1-6 AND 9-13

5/133-151

24/133-151 OBSOLETE OBSOLETE

USED ON OLD STYLE CHAINS WITH "D" SHAPED HOLE ON ONE SIDE. USE WITH NEW STYLE CHAINS HAVING ROUND HOLES ON BOTH SIDES. 5/133-151

NOT SHOWN:

FOOTNOTES:

NOTE:

09

ID0049675

150

SHARK CHAIN (1.686" P 35K) OLD STYLE

3

2

4 1

L

801-692

151

SHARK CHAIN (1.686" P 35K) OLD STYLE REF PART NO. NUMBER

QTY

DESCRIPTION

REMARKS

133-140 131-146 133-141 131-147 131-320 133-142 131-148 133-143 131-149 135-007 135-001 136-114 131-163

AR AR AR AR AR AR AR AR AR AR AR AR AR

33K 2P SHRK W/O 52P 86" 4.3WD 35K 2P SHK II W-O 52P 4.3 33K 2P SHRK W/O 62P 103" 4.3WD 35K 2P SHK II W-O 60P 4.3 35K 2P SHK II W-O 62P 4.3 33K 2P SHRK W/O 68P 112" 4.3WD 35K 2P SHK II W-O 66P 4.3 33K 2P SHRK W/O 84P 138" 4.3WD 35K 2P SHK II W-O 82P 4.3 LOCK KEY DIG CHAIN PIN (28K) CARBIDE TIPPED BIT 35K SHK REPAIR STATION

INCL REF NO'S 1 & 2, SEE SHARK CHAIN II PAGE 807-987 INCL REF NO'S 1 & 2, SEE SHARK CHAIN II PAGE 807-987 INCL REF NO'S 1 & 2, SEE SHARK CHAIN II PAGE 807-987 INCL REF NO'S 1 & 2, SEE SHARK CHAIN II PAGE 807-987 INCL REF NO'S 1 & 2, SEE SHARK CHAIN II PAGE 807-987 INCL REF NO'S 1 & 2, SEE SHARK CHAIN II PAGE 807-987 INCL REF NO'S 1 & 2, SEE SHARK CHAIN II PAGE 807-987 INCL REF NO'S 1 & 2, SEE SHARK CHAIN II PAGE 807-987 INCL REF NO'S 1 & 2, SEE SHARK CHAIN II PAGE 807-987

1.

2.

3.

4.

FOOTNOTES

NOTE:

L

801-692

152

SHARK CHAIN II (1.686" P 35K)

4

3

1 2

04

ID0055405

153

SHARK CHAIN II (1.686" P 35K) REF PART NO. NUMBER

1.

2.

3.

4.

131-146 131-147 131-320 131-148 131-149 135-007 135-002 135-1028 136-114 131-164

QTY

DESCRIPTION

AR 35K 2P SHK II W-O 52P 4.3" AR 35K 2P SHK II W-O 60P 4.3" AR 35K 2P SHK II W-O 62P 4.3" AR 35K 2P SHK II W-O 66P 4.3" AR 35K 2P SHK II W-O 82P 4.3" AR LOCK KEY AR DIG CHAIN PIN (33K) AR 35K MASTER PIN AR CARBIDE TIPPED BIT AR 35K SHARK II REPAIR STATION

REMARKS

INCL REF NO'S 1 & 2

USED ON OLD STYLE CHAINS WITH "D" SHAPED HOLE ON ONE SIDE. USE WITH NEW STYLE CHAINS HAVING ROUND HOLES ON BOTH SIDES.

NOT SHOWN:

FOOTNOTES:

NOTE:

04

ID0055405

154

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS

HAMMER 3 5

4

SLIDE HAMMER 3 1

2

H

801-056

155

SPECIAL TOOLS BIT PULLER FOR ALLIGATOR BITS REF PART NO. NUMBER

1.

2.

3.

4.

5.

259-002 259-001 259-036 105-403 105-357 183-072 259-003

QTY

1 1 2 1 1

DESCRIPTION

REMARKS

BIT PULLER - SLIDE HAMMER BIT PULLER - HAMMER BIT PULLER JAM NUT (5/8-NC) LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER

INCL REF NO.'S 1 - 5 EARLY STYLE

FOOTNOTES

NOTE:

H

801-056

156

SPECIAL TOOLS - ALIG BIT PUNCH

5

3

4

1 9 2 8

6

H

7

801-057

157

SPECIAL TOOLS - ALIG BIT PUNCH REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

259-150 105-708 105-964 105-994 183-072 259-003 259-151 259-152 259-153 105-357

QTY

DESCRIPTION

REMARKS

INCL REF NO.'S 1 THRU 8

2 1 1 1 1 1 1 1 1

BIT PUNCH - SLIDE HAMMER SET SCREW (3/8-NC X 3/8", NLK) WASHER (.656") FLG LOCKNUT (5/8-NC) SLIDE HAMMER ROD SLIDE HAMMER HEAVY BIT PUNCH-SLIDE HAMMER LIGHT BIT PUNCH-SLIDE HAMMER PUNCH ADAPTER-SLIDE HAMMER LOCKNUT (5/8-NC)

FOOTNOTES

NOTE:

H

801-057

158

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS

LEFT JAW

RIGHT JAW

8

9

11 10 11 10

1 2

3 4 12 5 6

13 4

7

H

801-058

159

SPECIAL TOOL - CHAIN JAWS FOR USE ON MASTER LINKS REF PART NO. NUMBER

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

259-140 259-186 115-003 105-310 105-975 259-185 125-402 107-761 259-181 259-180 105-059 105-181 105-066 105-065

QTY

DESCRIPTION

REMARKS

INCL REF NO'S 1 - 13

1 1 1 2 1 1 1 1 1 2 2 1 1

CHAIN JAWS (1-1/8" DRIVE) THREADED TRUNION ZERK (1/4-NF, STR) JAM NUT (3/4-NC) WASHER (3/4") SLIP TRUNION BRONZE BUSHING (.750") BOLT ALL THREAD (3/4-10 NC X 11") LEFT JAW RIGHT JAW WASHER (7/16") BOLT (3/8-NC X 1/2") BOLT (1/2-NC X 1-3/4") LOCKNUT (1/2-NC)

FOOTNOTES

NOTE:

H

801-058

160

BACKFILL BLADE

5 3

6

7 4

2

6

1

02

ID0281817

161

BACKFILL BLADE REF PART NO. NUMBER

1 2 3 4 5 6 7

190-1748 300-9164 301-2410 105-071 105-833 105-111 183-411 301-2414

QTY

1 1 1 1 1 2 1

DESCRIPTION

BLADE MOUNT KIT BLADE STUB, LONG WASHER (1/2") FLG LOCKNUT (1/2-NC) BOLT (1/2-NC X 4") PULL PIN (1/2" X 2") BLADE MOUNT

REMARKS

INCLUDES REF NO.'S 1-7 SEE FOOTNOTE 1

NOT SHOWN:

FOOTNOTES:

1. NOTE ORIENTATION OF CROSS-DRILLED END.

NOTE:

02

ID0281817

162

NOTES:

ID0134963

163

MISCELLANEOUS

164

Torque Information Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

V01

ID0493104

165

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry

Lubed

Dry

Lubed

Dry

Lubed

1/4-20

101 in•lb 11.4 N•m

76 in•lb 8.6 N•m

143 in•lb 16.2 N•m

107 in•lb 12.1 N•m

168 in•lb 19 N•m

120 in•lb 13.6 N•m

1/4-28

116 in•lb 13.1 N•m

87 in•lb 9.8 N•m

147 in•lb 16.6 N•m

123 in•lb 13.9 N•m

192 in•lb 21.7 N•m

144 in•lb 16.3 N•m

5/16-18

209 in•lb 23.6 N•m

157 in•lb 17.7 N•m

295 in•lb 33.3 N•m

221 in•lb 25 N•m

348 in•lb 39.3 N•m

264 in•lb 29.8 N•m

5/16-24

231 in•lb 26.1 N•m

174 in•lb 19.7 N•m

327 in•lb 36.9 N•m

245 in•lb 27.7 N•m

384 in•lb 43.4 N•m

288 in•lb 32.5 N•m

3/8-16

372 in•lb 42 N•m

276 in•lb 31.2 N•m

44 ft•lb 59.7 N•m

33 ft•lb 44.7 N•m

51 ft•lb 69.1 N•m

38 ft•lb 51.5 N•m

3/8-24

420 in•lb 47.5 N•m

312 in•lb 35.3 N•m

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

58 ft•lb 78.6 N•m

43 ft•lb 58.3 N•m

7/16-14

49 ft•lb 66.4 N•m

37 ft•lb 50.2 N•m

70 ft•lb 94.9 N•m

52 ft•lb 70.5 N•m

81 ft•lb 109.8 N•m

61 ft•lb 82.7 N•m

7/16-20

55 ft•lb 74.6 N•m

41 ft•lb 55.6 N•m

78 ft•lb 105.8 N•m

58 N•m 78.6 N•m

91 ft•lb 123.4 N•m

68 ft•lb 92.2 N•m

1/2-13

75 ft•lb 101.7 N•m

57 ft•lb 77.3 N•m

106 ft•lb 143.7 N•m

80 ft•lb 108.5 N•m

124 ft•lb 168.1 N•m

93 ft•lb 126.1 N•m

1/2-20

85 ft•lb 115.2 N•m

64 ft•lb 86.8 N•m

120 ft•lb 162.7 N•m

90 ft•lb 122 N•m

140 ft•lb 189.8 N•m

105 ft•lb 142.4 N•m

5/8-11

150 ft•lb 203.4 N•m

113 ft•lb 153.2 N•m

212 ft•lb 287.4 N•m

159 ft•lb 215.6 N•m

238 ft•lb 322.7 N•m

179 ft•lb 242.7 N•m

5/8-18

170 ft•lb 230.5 N•m

127 ft•lb 172.2 N•m

240 ft•lb 325.4 N•m

180 ft•lb 224 N•m

270 ft•lb 366.1 N•m

202 ft•lb 273.9 N•m

3/4-10

267 ft•lb 362 N•m

200 ft•lb 271.2 N•m

376 ft•lb 509.8 N•m

282 ft•lb 382.3 N•m

423 ft•lb 573.5 N•m

317 ft•lb 429.8 N•m

3/4-16

297 ft•lb 402.7 N•m

223 ft•lb 302.3 N•m

420 ft•lb 569.4 N•m

315 ft•lb 427.1 N•m

472 ft•lb 640 N•m

354 ft•lb 480 N•m

7/8-9

429 ft•lb 581.6 N•m

322 ft•lb 436.6 N•m

606 ft•lb 821.6 N•m

455 ft•lb 616.9 N•m

682 ft•lb 924.7 N•m

511 ft•lb 692.8 N•m

7/8-14

474 ft•lb 642.7 N•m

355 ft•lb 481.3 N•m

669 ft•lb 907 N•m

502 ft•lb 680.6 N•m

752 ft•lb 1019.6 N•m

564 ft•lb 791.8 N•m

1-8

644 ft•lb 873.1 N•m

483 ft•lb 654.9 N•m

909 ft•lb 1232.4 N•m

681 ft•lb 923.3 N•m

1022 ft•lb 1385.6 N•m

767 ft•lb 1039.9 N•m

1-12

722 ft•lb 978.9 N•m

542 ft•lb 734.9 N•m

1020 ft•lb 1382.9 N•m

765 ft•lb 1037.2 N•m

1147 ft•lb 1551.1 N•m

860 ft•lb 1166 N•m

V01

ID0493104

166

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898-1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry

Lubed

Dry

Lubed

Dry

Lubed

M5 X 0.80

54 in•lb 6.1 N•m

41 in•lb 4.6 N•m

78 in•lb 8.8 N•m

59 in•lb 6.7 N•m

91 in•lb 10.3 N•m

68 in•lb 7.7 N•m

M6 X 1.00

92 in•lb 10.4 N•m

69 in•lb 7.8 N•m

133 in•lb 15 N•m

99 in•lb 11.2 N•m

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

M7 X 1.00

156 in•lb 17.6 N•m

116 in•lb 13.1 N•m

222 in•lb 25.1 N•m

167 in•lb 18.9 N•m

260 in•lb 29.4 N•m

195 in•lb 22 N•m

M8 X 1.25

225 in•lb 25.4 N•m

169 in•lb 19.1 N•m

333 in•lb 37.6 N•m

242 in•lb 31.3 N•m

377 in•lb 42.6 N•m

284 in•lb 32.1 N•m

M10 X 1.50

37 ft•lb 50.2 N•m

28 ft•lb 38 N•m

53 ft•lb 71.9 N•m

40 ft•lb 54.2 N•m

62 ft•lb 84.1 N•m

47 ft•lb 63.7 N•m

M12 X 1.75

65 ft•lb 88.1 N•m

49 ft•lb 66.4 N•m

93 ft•lb 126.1 N•m

69 ft•lb 93.6 N•m

108 ft•lb 146.4 N•m

81 ft•lb 109.8 N•m

M14 X 2.00

104 ft•lb 141 N•m

78 ft•lb 105.8 N•m

148 ft•lb 200.7 N•m

111 ft•lb 150.5 N•m

173 ft•lb 234.6 N•m

130 ft•lb 176.3 N•m

M16 X 2.00

161 ft•lb 218.3 N•m

121 ft•lb 164.1 N•m

230 ft•lb 311.8 N•m

172 ft•lb 233.2 N•m

269 ft•lb 364.7 N•m

202 ft•lb 273.9 N•m

M18 X 2.50

222 ft•lb 301 N•m

167 ft•lb 226.4 N•m

318 ft•lb 431.2 N•m

238 ft•lb 322.7 N•m

372 ft•lb 504.4 N•m

279 ft•lb 378.3 N•m

M20 X 2.50

314 ft•lb 425.7 N•m

235 ft•lb 318.6 N•m

449 ft•lb 608.8 N•m

337 ft•lb 456.9 N•m

525 ft•lb 711.8 N•m

394 ft•lb 534.2 N•m

M22 X 2.50

428 ft•lb 580.3 N•m

321 ft•lb 435.2 N•m

613 ft•lb 831.1 N•m

460 ft•lb 623.7 N•m

716 ft•lb 970.8 N•m

537 ft•lb 728.1 N•m

M24 X 3.00

543 ft•lb 736.2 N•m

407 ft•lb 551.8 N•m

776 ft•lb 1052.1 N•m

582 ft•lb 789.1 N•m

908 ft•lb 1231.1 N•m

681 ft•lb 923.3 N•m

M27 X 3.00

796 ft•lb 1079.2 N•m

597 ft•lb 809.4 N•m

1139 ft•lb 1544.3 N•m

854 ft•lb 1157.9 N•m

1331 ft•lb 1804.6 N•m

998 ft•lb 1353.1 N•m

M30 X 3.50

1079 ft•lb 1462.9 N•m

809 ft•lb 1096.9 N•m

1543 ft•lb 2092 N•m

1158 ft•lb 1570 N•m

1804 ft•lb 2445.9 N•m

1353 ft•lb 1834.4 N•m

M33 X 3.50

1468 ft•lb 1990.3 N•m

1101 ft•lb 1492.8 N•m

2101 ft•lb 2848.6 N•m

1576 ft•lb 2136.8 N•m

2455 ft•lb 3328.5 N•m

1842 ft•lb 2497.4 N•m

M36 X 4.00

1886 ft•lb 2557.1 N•m

1415 ft•lb 1918.5 N•m

2699 ft•lb 3659.4 N•m

2024 ft•lb 2744.2 N•m

3154 ft•lb 4276.3 N•m

2366 ft•lb 3207.9 N•m

V01

ID0493104

167

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and maximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade B Hex

Grade C Hex

Grade F Hex Flange

Grade G Hex Flange

US

Metric

US

Metric

US

Metric

US

Metric

1/4-20

7-10 ft•lb

9-13 N•m

8-12 ft•lb

11-16 N•m

6-8 ft•lb

8-11 N•m

9-11 ft•lb

12-15 N•m

1/4-28

8-11 ft•lb

11-15 N•m

9-12 ft•lb

12-16 N•m

7-9 ft•lb

9-12 N•m

10-13 ft•lb

13-17 N•m

5/16-18

13-18 ft•lb

17-24 N•m

16-21 ft•lb

21-28 N•m

13-17 ft•lb

17-23 N•m

18-23 ft•lb

24-43 N•m

5/16-24

14-19 ft•lb

19-25 N•m

18-23 ft•lb

24-31 N•m

14-18 ft•lb

19-24 N•m

20-26 ft•lb

27-35 N•m

3/8-16

16-20 ft•lb

21-27 N•m

28-37 ft•lb

38-50 N•m

23-29 ft•lb

31-39 N•m

33-41 ft•lb

44-50 N•m

3/8-24

16-22 ft•lb

21-30 N•m

32-42 ft•lb

43-57 N•m

26-33 ft•lb

35-44 N•m

37-47 ft•lb

50-63 N•m

7/16-14

23-32 ft•lb

31-43 N•m

45-59 ft•lb

61-80 N•m

37-47 ft•lb

50-63 N•m

52-66 ft•lb

70-89 N•m

7/16-20

24-34 ft•lb

32-46 N•m

51-66 ft•lb

69-89 N•m

41-52 ft•lb

55-70 N•m

58-74 ft•lb

78-100 N•m

1/2-13

37-50 ft•lb

50-67 N•m

69-90 ft•lb

93-122 N•m

57-72 ft•lb

77-97 N•m

80-101 ft•lb

108-137 N•m

1/2-20

38-53 ft•lb

51-72 N•m

78-102 ft•lb

105-138 N•m

64-81 ft•lb

87-110 N•m

90-114 ft•lb

122-154 N•m

9/16-12

50-70 ft•lb

67-95 N•m

100-130 ft•lb

135-176 N•m

82-103 ft•lb

111-139 N•m

115-146 ft•lb 156-198 N•m

9/16-18

58-78 ft•lb

78-105 N•m

111-146 ft•lb

150-198 N•m

91-115 ft•lb

123-156 N•m 128-163 ft•lb 173-221 N•m

5/8-11

70-95 ft•lb

95-129 N•m

138-180 ft•lb

187-224 N•m

113-143 ft•lb 153-194 N•m 159-201 ft•lb 215-272 N•m

5/8-18

73-98 ft•lb

99-133 N•m

156-204 ft•lb

211-276 N•m

127-161 ft•lb 172-218 N•m 180-228 ft•lb 224-309 N•m

3/4-10

125-165 ft•lb 169-223 N•m 245-320 ft•lb

332-434 N•m

200-253 ft•lb 271-343 N•m 282-357 ft•lb 382-484 N•m

3/4-16

120-165 ft•lb 162-223 N•m 273-357 ft•lb

370-484 N•m

223-282 ft•lb 302-382 N•m 315-399 ft•lb 427-541 N•m

7/8-9

185-250 ft•lb 251-339 N•m 394-515 ft•lb

534-698 N•m

7/8-14

200-270 ft•lb 271-366 N•m 435-568 ft•lb

589-770 N•m

1-8

275-375 ft•lb 373-508 N•m 591-772 ft•lb

801-1046 N•m

1-12

290-395 ft•lb 393-535 N•m 663-867 ft•lb

899-1175 N•m

1 1/8-7

294-404 ft•lb 398-547 N•m 837-1095 ft•lb

1135-1484 N•m

1 1/8-12

412-549 ft•lb 558-744 N•m 939-1227 ft•lb

1273-1663 N•m

1 1/4-7

375-513 ft•lb 508-695 N•m 1181-1545 ft•lb 1601-2094 N•m

1 1/4-12

412-549 ft•lb 558-744 N•m 1308-1710 ft•lb 1773-2318 N•m

V01

Grades B and F: SAE J429 Grade 5 bolts Grades C and G: SAE J429 Grade 8 bolts

ID0493104

168

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb X .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Lug Nut Torque Size

Type

Torque (ft•lb)

Torque (N•m)

7/16-NF

cone

75-85

102-115

1/2-NF

cone

90-100

120-135

5/8-NF

flange

275-325

373-440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

Hydraulic Cylinder Bolt Torque Bolt Size

Bolt PN

Cylinder Repair Kit PN

Torque

1/2”

106-096

190-165

90-100 ft•lb

120-135 N•m

5/8”

106-097

190-166 & 190-169

180-200 ft•lb

245-270 N•m

3/4”

106-098

190-167 & 190-170

290-325 ft•lb

395-440 N•m

7/8”

106-122

190-172 & 190-174

410-460 ft•lb

550-625 N•m

1”

106-145

190-175 & 190-189

630-700 ft•lb

855-950 N•m

1-1/8”

106-146

190-177

770-850 ft•lb

1045-1170 N•m

IMPORTANT: Do not reuse cylinder piston bolts when rebuilding a hydraulic cylinder. Each cylinder repair kit contains a new bolt. Use it. Lubricate lightly and tighten to value shown on chart.

V01

ID0493104

Replacement O-Rings Fitting

SAE (Port Seal)

ORFS (Face Seal)

Code 61, Code 62 4-Bolt Flange

Thread

O-Ring

Dash

O-Ring

Size

Dash

Thread

O-Ring

(Inch)

Size

Size

Dash Size

P/N

Size

Dash Size

P/N

Size

P/N

1/16

1

NA

NA

NA

NA

NA

NA

NA

NA

1/8

2

5/16 - 24

-902

NA

NA

NA

NA

NA

NA

3/16

3

3/8 - 24

-903

NA

NA

NA

NA

NA

NA

1/4

4

7/16 - 20

-904

155-760

9/16 - 18

-011

157-037

NA

NA

5/16

5

1/2 - 20

-905

NA

5/8 - 18

NA

NA

NA

NA

3/8

6

9/16 - 18

-906

155-705

11/16 - 16

-012

157-038

NA

NA

1/2

8

3/4 -16

-908

155-706

13/16 - 16

-014

157-039

-210

155-759 #

5/8

10

7/8 - 14

-910

155-707

1 - 14

-016

157-040

NA

NA

3/4

12

1-1/16 - 12

-912

155-709

1-3/16 - 12

-018

157-017

-214

155-723

7/8

14

1-3/16 - 12

-914

155-747

1-5/16 - 12

-020

157-042

NA

NA

1

16

1-5/16 - 12

-916

155-748

1-7/16 - 12

-021

155-714

-219

157-029

1-1/4

20

1-5/8 - 12

-920

155-702

1-11/16 - 12

-025

157-129

-222

157-078

1-1/2

24

1-7/8 - 12

-924

157-001

2 -12

-029

157-130

-225

157-128

2

32

2-1/2 - 12

-932

NA

2-1/2 - 12

-135

NA

-228

500-031

2-1/2

40

3 - 12

NA

NA

NA

NA

NA

-232

157-015 #

3

48

3-1/2 - 12

NA

NA

NA

NA

NA

-237

157-006 #

All part numbers listed above are D90 except for # which are D70.

Thread size indicates the diameter of the threaded area in fractions of an inch and number of threads per inch.

NA = not a current Ditch Witch® part numbered o-ring, or dash size does not occur in current Ditch Witch applications.

SAE = straight thread fitting that seals by compressing a hard o-ring between a shoulder on the male part and an angular surface at the mouth of the female port.

ORFS = o-ring seal; a fitting that seals by compressing a hard, captive o-ring between two flat parallel faces, one grooved for the o-ring and the other plain to act as the sealing surface.

V01

ID0493104

169

170

1030-1230 Related Publications Component

Ass’y

P/N

Model: 1030 - 1230 ........... Parts Manual .................................................................... .............. 053-479 1030 - 1230 ........... Operators Manual ............................................................ .............. 054-515 1030 - 1230 ........... Repair Guide (Service Manual) ....................................... .............. 055-517 1030 - 1230 ........... Supplementary Maint Guide - Trencher .......................... .............. 050-633 1030 - 1230 ........... Digging Chain Guide (6 Volumes) ................................... .............. 050-700 1030 - 1230 ........... Special Tools Guide ......................................................... .............. 052-901 Engine: 1030 Honda .................... Parts Manual - GX340QAP ..................................... 195-158 ...... 053-027 Honda .................... Operators Manual - GX340QAP ...................................... .............. 054-027 Honda .................... Service (Shop) Manual - GX340QAP .............................. .............. 055-027 Kohler .................... Parts Manual - CH11T ............................................. 195-157 ...... 053-025 Kohler .................... Operators Manual - CH11T ............................................. .................. N/A Kohler .................... Service (Shop) Manual - CH11T ..................................... .............. 055-025 Kohler .................... Sales & Service Directory ................................................ .............. 050-527 1230 Honda .................... Parts Manual - GX390QA ........................................ 195-278 ...... 053-047 Honda .................... Operators Manual - GX390QA ........................................ .................. N/A Honda .................... Service (Shop) Manual - GX390QA ................................ .............. 055-047 Kohler .................... Parts Manual - CH12.5T .......................................... 195-277 ...... 053-025 Kohler .................... Operators Manual - CH12.5T .......................................... .................. N/A Kohler .................... Service (Shop) Manual - CH12.5T .................................. .............. 055-025 Kohler .................... Sales & Service Directory ................................................ .............. 050-527 Hyd Motor: Ross ...................... Service (Shop) Manual - MK Series ........................ 158-756 ...... 055-048

Filters Engine: Air Filter Parts Ass’y - Honda ............................................................................................... N/A Element Set (primary, paper) - Honda ............................................................. 195-159 (secondary, foam) - Honda ....................................................... 195-159 Air Filter Parts Ass’y (Remote) - Honda ........................................................................... 196-262 Element (Remote) - Honda .................................................................................. N/A Air Stack Cap (1.750”) - Honda ........................................................................................ 195-187 Fuel Filter (04H-04H, in-line) - Honda .............................................................................. 194-002 Air Filter Parts Ass’y - Kohler ............................................................................................... N/A Element (primary, paper) - Kohler .................................................................... 195-372 Element (secondary, foam) - Kohler ................................................................ 195-373 Air Filter Parts Ass’y (Remote) - Kohler ........................................................................... 190-655 Element (Remote) - Kohler .................................................................................. N/A Air Stack Cap (1.750”) - Kohler ........................................................................................ 195-187 Oil Filter Element (spin-on) - Kohler ................................................................................. 159-066 Fuel Filter (04H-04H, in-line) - Kohler .............................................................................. 195-256 Hydraulic: Oil Filter Element (1-UNF, spin-on) .................................................................................. 155-910

Optional Kits O-ring Repair Kit - FLG, ORS & SAE (15 different O-rings) ............................................. 190-051 O-ring Repair Kit - Field Service (46 different O-rings) .................................................... 190-052

VS02

ID0193388

171

ID0040564

172

ID0135281