Cummins QSL 9 ATLAS COPCO ST1030 MARK II Parts Catalog Manual SN 46641008 - PDF DOWNLOAD

A. II - QSL CONSTRUCTION

Customized Parts Catalog for Engine Model

QSL CONSTRUCTION

Prepared Specifically for:

ATLAS COPCO ST1030 MARK II Engine Serial Number: 46641008

Serial No. 46641008

!46641008!

Customized Parts Catalog for Engine Model

QSL CONSTRUCTION

Prepared Specifically for:

ATLAS COPCO ST1030 MARK II Engine Serial Number: 46641008

Cummins Inc. Box 3005 Columbus, Indiana, U.S.A., 47202 Copyright姝 2006 Cummins Inc.

Bulletin No.46641008

Printed in U.S.A.

Cummins Inc. New Parts Warranty Midrange

COVERAGE PRODUCTS WARRANTED This warranty applies to New Parts marketed by Cummins for its A, B, and C Series engines. It applies anywhere in the world where service is available through a Cummins distributor or A, B, and C Series dealer.* COVERAGE This warranty covers any failures of parts on or after December 1, 1986, which result, under normal use and service, from defects in workmanship or material (Warrantable Failures). The coverage extends six months from the date of first installation.

This warranty continues to all subsequent Owners until the end of the period of coverage.

CUMMINS RESPONSIBILITIES

Cummins will pay for all parts and labor needed to repair the damage to the engine resulting from the Warrantable Failure. All labor costs will be paid in accordance with Cummins published Standard Repair Time guidelines.

Cummins will pay for the lubricating oil, antifreeze, filter elements, and other maintenance items that are not reusable due to the Warrantable Failure.

Cummins will pay reasonable labor costs for engine removal and reinstallation when necessary to make the warranty repair.

OWNER RESPONSIBILITIES

At the time when the parts are installed, Owner is responsible for the preparation of a written record containing the following: (1) the date of installation of the parts; (2) the engine serial number; (3) the engine miles, hours or kilometers of operation; (4) the parts installed, and (5) the location of the parts in the engine. The purpose of this record is to protect Owner’s interests and support any claim for a Warrantable Failure.

Owner is responsible for the operation and maintenance of the engine as specified in Cummins Operation and Maintenance Manuals.

Before expiration of the warranty, Owner must give notice to a Cummins distributor or A, B, and C Series dealer* of a failure considered to be warrantable and deliver the engine to such facility for repair.

Owner is responsible for the cost of lubricating oil, antifreeze, filter elements and other maintenance items replaced during warranty repairs except where such items are not reusable due to a Warrantable Failure.

Owner is responsible for communication expenses, meals, lodging and similar costs incurred by Owner as a result of a Warrantable Failure. Owner is responsible for non-engine repairs and for ‘‘downtime’’ expenses, cargo damage and all business costs and losses resulting from a Warrantable Failure. CUMMINS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. (In the United States, some states do not allow the exclusion or limitation of incidental or consequential damages relating to Consumer Products, so the above limitation or exclusion may not apply to you.)

LIMITATIONS

Cummins is not responsible for failures resulting from Owner or Operator abuse or neglect, such as: operation without adequate coolant or lubricants; overfueling; overspeeding; lack of maintenance of lubricating, cooling or air intake systems; improper storage, starting, warm-up, run-in or shutdown practices. Cummins is also not responsible for failures caused by incorrect fuel, or by water, dirt or other contaminants in the fuel.

Except for fuel pumps, Cummins does not warrant parts supplied by Cummins which bear the name of another company. These parts are warranted by their manufacturers and not by Cummins. This category of parts includes, but is not limited to: hydraulic pumps, alternators, starters, fans, air conditioning compressors, clutches, filters, transmissions, torque converters, marine gears, air cleaners and non-Cummins air compressors, engine compression brakes, and steering pumps.

Parts used in warranty repairs may be new Cummins, Cummins approved rebuilt parts, or repaired parts. Cummins is not responsible for failures resulting from the use of parts not approved by Cummins.

Before a claim for excessive oil consumption will be considered, Owner must submit adequate documentation to show that consumption exceeds Cummins published standards.

This warranty does not apply to parts furnished by Cummins at no charge to the Owner.

THIS WARRANTY IS THE SOLE WARRANTY MADE BY CUMMINS IN REGARD TO THESE PARTS. CUMMINS MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, OR OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Page ii

Customer Service Information This Customized Parts Catalog contains parts information for the following Cummins Engine:

Engine Data Model Number Serial Number Shop Order Number Build Plant Build Date Fuel Pump Part Number Fuel Pump Calibration Engine Configuration Number CPL Number

QSL 46641008 SO48021 CONSOLIDATED DIESEL CO. 15JUL06 4921431 GZ75 D563004CU02 CPL422

Certain basic engine components have been matched to give optimum performance to your engine. The part numbers listed in this catalog for these components are for a standard engine configuration. When ordering any of the Control Parts List (CPL) components listed below, please order by part description and engine serial number. Reference to the CPL number stamped on the engine data (name) plate will also help identify the proper service parts for your engine.

This catalog was compiled using the most current information as of 02-NOV-06.

USER INFORMATION . Parts numbers appearing in ( ) are for identification purposes only and should not be used when ordering service replacement parts. . The reference numbers appearing on the art pages is for publication use only. . Assembly content is shown by part number indentation. . Options are engineered production part groupings, specifically used for compiling engine orders. . Option numbers are for reference only and are not sold for service. . Use assembly and not option content to determine service parts replacement. . Always specify engine model and serial number when ordering parts from this catalog. . Continual product improvement causes the obsoletion and replacement of part numbers. Service Parts you receive may not be the part number as those listed in this parts catalog.

Page iii

Page iv

Table of Contents Page No.

Page No.

ACCESSORY DRIVE PULLEY ............................... 84 Agency Approval ...................................................... 4 Air Heater Starting Aid ............................................. 3 Air Intake Connection ............................................. 63 AIR INTAKE CONNECTION MTG ........................... 64 Air Intake Manifold ................................................. 65 Air Transfer Connection .......................................... 66 Alternator Mounting ................................................ 29 ARRANGEMENT,TURBOCHARGER ..................... 111 ARRANGEMENT,VALVE COVER .......................... 118

Injector Plumbing ................................................. 105

BELT TENSIONER ............................................... 128 Cabin Heater Plumbing .......................................... 60 Camshaft ............................................................... 96 Connecting Rod and Piston .................................... 95 Coolant Heater Starting Ai ................................ 22, 23 Corrosion Resistor ................................................ 123 CRANKCASE BREATHER ...................................... 19 Crankshaft Assembly .............................................. 11 CYLINDER BLK COOLANT PLUMB ....................... 15 Cylinder Block ......................................................... 7 Cylinder Block Cover .............................................. 79 Cylinder Liner .......................................................... 8 Dataplate ............................................................... 88 ELECTRONIC CONTROL COOLER ....................... 89 Eng Cnt Module Plumbing ..................................... 87 Engine Control Module ........................................... 91 Engine Control Module Plum .................................. 85 Engine Oil Cooler ................................................... 71 EXHAUST MANIFOLD .......................................... 113 Exhaust Outlet Connection ................................... 132 External Control Module ....................................... 131 Fan Drive ............................................................... 33 Fan Drive Mounting ................................................ 34 FLYWHEEL ............................................................ 55 Flywheel Housing ................................................... 41 Flywheel Mounting ................................................. 56 Frnt Gear Train Accy Drive ..................................... 25 Front Engine Support ............................................. 30 Front Gear Cover ................................................... 59 Front Gear Housing ................................................ 17 Fuel Filter .............................................................. 39 Fuel Filter Plumbing ............................................... 37 Fuel Injector ........................................................... 99 Fuel Inlet Fitting ..................................................... 42 Fuel Plumbing ........................................................ 53 FUEL PUMP .......................................................... 47 FUEL PUMP MOUNTING ...................................... 45 Fuel Transfer Pump ................................................ 51 Gear Cover Mounting ............................................. 57 HEAD,CYLINDER ................................................. 100

Page 1

Lifting Arrangement .......................................... 67, 68 LUBE OIL .............................................................. 76 Lube Oil Pump ....................................................... 77 Lubricating Oil Filter ............................................... 73 MOUNTING,STARTING MOTOR ........................... 109 Oil Filler Arrangement ............................................ 78 Oil Level Gauge ..................................................... 75 Oil Pan ................................................................... 81 Piston Cooling Nozzle .............................................. 9 Rad Plumbing Connection .................................... 108 RATING,FUEL ........................................................ 48 Refrigerant Compressor ......................................... 21 Rocker Lever ........................................................ 107 SOFTWARE,CUS INTERFACE ............................... 26 Starting Motor ....................................................... 110 Temperature Sensor ............................................... 92 Thermostat ............................................................. 27 Torque Converter Oil Coole ................................... 114 TURBOCHARGER ................................................ 101 TURBOCHARGER PLUMBING ............................. 117 Valve Cover .......................................................... 121 Valve Tappet ........................................................... 14 VIBRATION DAMPER ............................................. 24 Vibration Isolator .................................................... 93 Water Inlet Connection ......................................... 124 WATER OUTLET CONNECTION .......................... 125 Water Pump ......................................................... 126 Water Pump Drive ................................................ 127 Option Number Index ............................................. A-1 Part Number Index ................................................. B-1

Group No. 10.02

AID,AIR HEATER STARTING

Page 2

Option No. AH9155

Group No. 10.02 Ref No.

Part Number

AID,AIR HEATER STARTING Part Name

Req

Option No. AH9155 Remarks

AIR HEATER STARTING AID OPTION AH9155

MR - AID, AIR HEATER STARTING Air Heater Type: Grid Heater Voltage: 24 Amperage: 100 Ground type: Isolated Mounting Bolt Pattern: 4 x 9.5mm Irregular Spacing Grid Heater Location: Air Intake Manifold Electrical Terminal Eyelet Diameter (mm): TBD Decal: Place the Warning Label on the Flat FA Face of Grid Heater The Label Should be Placed After Painting DEP Will Omit 3927335 Tag Instruction from UK Option to Comply With European Legislation

1 2 3

3975485 3975487 4938740

Heater, Intake Air Gasket, Connection Tag, Instruction

1 1 1

Page 3

Group No. 01.06.1

Ref No.

Agency Approval

Part Number

Part Name

Option No. AP9455

Req

Remarks

AGENCY APPROVAL OPTION AP9455

MR - APPROVAL, AGENCY Certified By: EPA, CARB, EU Application: Nonroad Cert Level: Tier 3, Tier 3, STIIIA Special Allowance: None Cert Agent: EPA, EPA, VCA Comments: N/A Fuel Type: Diesel Manufacturer of Record: Cummins Language: English Engine Family: C & L Series

1 2 3

3284906 3908612 3978698

Dataplate Screw, Drive Dataplate

1 2 1

Page 4

NOTES

Group No. 01.01

Cylinder Block

Page 6

Option No. BB9081

Group No. 01.01 Ref No.

Part Number

Cylinder Block Part Name

Option No. BB9081 Req

Remarks

CYLINDER BLOCK OPTION BB9081

MR - BLOCK, CYLINDER Engine Family: L Design Phase: Pegasus Beta Piston Cooling Nozzles: Targeted Tappets: Roller Main Bearing Cap Material: 41,020 Push Rod Load Capability (lbs.): 1700 Flywheel Housing to Block Mounting: 12 x M12 x 1.75 Oil Pan to Block Mounting: 24 x M8 x 1.25 Block/Oil Pan Mounting Hole Spacing: Equal Block/Oil Pan Mounting Hole Pitch (mm): 78.5 Block Flange: 282mm x 773.5mm (Width/ Length, Hole to Hole) Grounding Stud Location: Fuel Pump Side (Hole #326) Fuel Pump Side (Hole #442)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

S 923 E 3008468 3678921 3678912 (3678922) 3678923 (3678924) 3678925 3900257 3901846 3901969 3907177 3909025 3926048 3966286 (3971391) 143066 3004258 3900956 3905401 3945329 (3948095) 3966035 3970810 3970955 (3971390) 3959291

Draincock Plug, Pipe Plug, Threaded Seal, O Ring Plug, Threaded Plug, Threaded Plug, Threaded Seal, O Ring Dowel, Pin Dowel, Pin Plug, Expansion Seal, Rectangular Ring Screw, Hex Flange Head Cap Seal, O Ring Screw, Hex Flange Head Cap Block, Cylinder Plug, Expansion Plug, Expansion Plug, Expansion Plug, Expansion Bushing Liner, Cylinder Guide, Tappet Screw, Hex Flange Head Cap Cap, Main Bearing Block, Cylinder Nozzle, Piston Cooling

1 1 1 1 1 5 1 1 2 2 1 6 6 1 1 1 3 3 4 7 6 12 14 7 1 6

Page 7

1/2 NPT

M8 x 1.25 x 55 Sold In Higher Level Assy/Kit

Sold In Higher Level Assy/Kit

Group No. 01.01.1

Ref No.

Part Number

Cylinder Liner

Part Name

Option No. BB9081

Req

Remarks

CYLINDER LINER OPTION BB9081

MR - LINER, CYLINDER Engine Family: L Design Phase: Pegasus Beta Piston Cooling Nozzles: Targeted Tappets: Roller Main Bearing Cap Material: 41,020 Push Rod Load Capability (lbs.): 1700 Flywheel Housing to Block Mounting: 12 x M12 x 1.75 Oil Pan to Block Mounting: 24 x M8 x 1.25 Block/Oil Pan Mounting Hole Spacing: Equal Block/Oil Pan Mounting Hole Pitch (mm): 78.5 Block Flange: 282mm x 773.5mm (Width/ Length, Hole to Hole) Grounding Stud Location: Fuel Pump Side (Hole #326) Fuel Pump Side (Hole #442)

1 2

3800328 (3948095) 3907177

Kit, Liner Liner, Cylinder Seal, Rectangular Ring

6 1 1

Page 8

Sold In Higher Level Assy/Kit

Group No. 01.01.2

Ref No.

Part Number

Piston Cooling Nozzle

Part Name

Option No. BB9081

Req

Remarks

PISTON COOLING NOZZLE OPTION BB9081

MR - NOZZLE, PISTON COOLING Engine Family: L Design Phase: Pegasus Beta Piston Cooling Nozzles: Targeted Tappets: Roller Main Bearing Cap Material: 41,020 Push Rod Load Capability (lbs.): 1700 Flywheel Housing to Block Mounting: 12 x M12 x 1.75 Oil Pan to Block Mounting: 24 x M8 x 1.25 Block/Oil Pan Mounting Hole Spacing: Equal Block/Oil Pan Mounting Hole Pitch (mm): 78.5 Block Flange: 282mm x 773.5mm (Width/ Length, Hole to Hole) Grounding Stud Location: Fuel Pump Side (Hole #326) Fuel Pump Side (Hole #442)

1

3959291

Nozzle, Piston Cooling

6

Page 9

Group No. 01.02

Crankshaft Assembly

Page 10

Option No. BB9081

Group No. 01.02 Ref No.

Part Number

Crankshaft Assembly Part Name

Option No. BB9081

Req

Remarks

CRANKSHAFT ASSEMBLY OPTION BB9081

MR - ASSEMBLY, CRANKSHAFT Engine Family: L Design Phase: Pegasus Beta Piston Cooling Nozzles: Targeted Tappets: Roller Main Bearing Cap Material: 41,020 Push Rod Load Capability (lbs.): 1700 Flywheel Housing to Block Mounting: 12 x M12 x 1.75 Oil Pan to Block Mounting: 24 x M8 x 1.25 Block/Oil Pan Mounting Hole Spacing: Equal Block/Oil Pan Mounting Hole Pitch (mm): 78.5 Block Flange: 282mm x 773.5mm (Width/ Length, Hole to Hole) Grounding Stud Location: Fuel Pump Side (Hole #326) Fuel Pump Side (Hole #442)

3965012 (3965011) 3918776 3904483

Crankshaft, Engine Crankshaft, Engine Gear, Crankshaft Pin, Dowel

1 1 1 1

Purchase Individual Parts

1 2 3

4 5 6

3945917 (3944158) 3944163 (3944153)

MAIN BEARING SETS 1 Kit, PDC Bearing, Main Bearing, Crankshaft Thrust Bearing, Main

1 6 1 7

Standard Sold In Higher Level Assy/Kit

4 5 6

3945918 (3944159) (3944164) (3944154)

Kit, PDC Bearing, Main Bearing, Crankshaft Thrust Bearing, Main

1 6 1 7

0.25 mm Oversize Sold In Higher Level Assy/Kit Sold In Higher Level Assy/Kit Sold In Higher Level Assy/Kit

4 5 6

3945919 (3944160) 3944165 (3944155)

Kit, PDC Bearing, Main Bearing, Crankshaft Thrust Bearing, Main

1 6 1 7

0.50 mm Oversize Sold In Higher Level Assy/Kit

4 5 6

3945920 (3944161) 3944166 (3944156)

Kit, PDC Bearing, Main Bearing, Crankshaft Thrust Bearing, Main

1 6 1 7

0.75 mm Oversize Sold In Higher Level Assy/Kit

4 5 6

3945921 (3944162) 3944167 (3944157)

Kit, PDC Bearing, Main Bearing, Crankshaft Thrust Bearing, Main

1 6 1 7

1.00 mm Oversize Sold In Higher Level Assy/Kit

3926126 (3925530) (3925532) 3925343

SERVICE PARTS Kit, Seal Seal, Oil Sleeve, Wear Kit, Seal

1 1 1 1

Rear Sold In Higher Level Assy/Kit Sold In Higher Level Assy/Kit Fr Non-Automotive Application

7 8

Page 11

Sold In Higher Level Assy/Kit

Sold In Higher Level Assy/Kit

Sold In Higher Level Assy/Kit

Sold In Higher Level Assy/Kit

Group No. 01.02

Crankshaft Assembly

Page 12

Option No. BB9081

Group No. 01.02

Crankshaft Assembly

Ref No.

Part Number

9 10 11

(3921928) 3924986 (3924987)

Seal, Oil Sleeve, Wear Shield, Dust

3944168 3944169 (3944170)

OVERSIZE THRUST BEARINGS Bearing, Crankshaft Thrust Bearing, Crankshaft Thrust Bearing, Crankshaft Thrust

Part Name

Option No. BB9081

Req

Page 13

Remarks

1 1 1

Sold In Higher Level Assy/Kit Sold In Higher Level Assy/Kit Sold In Higher Level Assy/Kit

A/R A/R A/R

Std Journal - Oversize Thrust Std Journal - Oversize Thrust

Group No. 04.01

Ref No.

Valve Tappet

Part Number

Part Name

Option No. BB9081

Req

Remarks

VALVE TAPPET OPTION BB9081

MR - TAPPET, VALVE Engine Family: L Design Phase: Pegasus Beta Piston Cooling Nozzles: Targeted Tappets: Roller Main Bearing Cap Material: 41,020 Push Rod Load Capability (lbs.): 1700 Flywheel Housing to Block Mounting: 12 x M12 x 1.75 Oil Pan to Block Mounting: 24 x M8 x 1.25 Block/Oil Pan Mounting Hole Spacing: Equal Block/Oil Pan Mounting Hole Pitch (mm): 78.5 Block Flange: 282mm x 773.5mm (Width/ Length, Hole to Hole) Grounding Stud Location: Fuel Pump Side (Hole #326) Fuel Pump Side (Hole #442)

1

3965966

Tappet, Valve

12

Page 14

Group No. 01.01

Ref No.

Cylinder Blk Coolant Plumbing

Part Number

Part Name

Req

Option No. BB9127

Remarks

CYLINDER BLK COOLANT PLUMB OPTION BB9127

MR03 - PLUMBING, CYLINDER BLOCK COOLANT Port #466 (-123.5, 336.0, -772.0): Closed Port #467 (-123.5, 259.0, -772.0): Closed Port #425 (-123.5, 336.0, -498.0): Closed Port #427 (-123.5, 259.0, -498.0): Closed This Option is Required to Close Off Unused Coolant Ports (Corrosion Resistor) on the Pegasus Cylinder Block

1

3008469

Plug, Pipe

4

Page 15

3/4 NPT

Group No. 01.06

Front Gear Housing

Page 16

Option No. BB9836

Group No. 01.06 Ref No.

Part Number

Front Gear Housing Part Name

Option No. BB9836

Req

Remarks

FRONT GEAR HOUSING OPTION BB9836 Engine Family: C And L Design Phase: Pegasus Alpha Drive Location: Gear cover - back Accy drive pilot bore: 114.7mm Centerline of crank to centerline of accy drive provision: 39.5mm Centerline of engine to centerline of accy drive provision: 227.4mm Gear Housing Mounting: 6 Xm8 X1.25 Gear housing accy drive mounting provision: 2 xm12 x1.75 Gear housing accy drive mounting bolt circle diameter: 146mm Fuel pump pilot bore: 107mm Centerline of crank to centerline of fuel pump drive provision: 317.7mm Centerline of engine to centerline of fuel pump drive provision: 209mm Fuel pump mounting 4 x m10 x 1.5 Fuel pump mounting bolt circle diameter: 130mm 1 2 3 4

3926846 3943885 3944293 3950375

Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Gasket, Gear Housing Housing, Gear

3 3 1 1

Page 17

M8 x 1.25 x 20 M8 x 1.25 x 40

Group No. 03.02

Crankcase Breather

Page 18

Option No. BR9215

Group No. 03.02 Ref No.

Part Number

Crankcase Breather Part Name

Option No. BR9215

Req

Remarks

CRANKCASE BREATHER OPTION BR9215

MR - BREATHER, CRANKCASE Breather Type: Open Breather Plumbing Supplier: Cummins Hose Termination Point Above Crank Centerline (mm): 9.045 Vent Connection Location: Valve Cover From Crank Centerline (mm): 9.045 From Engine Centerline (mm): 174.255 From Front Face of Block (mm): 842.019 Engine Family: C & L Series

1 2 3 4 5 6

3900589 3901865 3925883 3964093 3073966 (3964092) 3974546

Nut, Hexagon Flange Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Housing, Breather Seal, O Ring Housing, Breather Tube, Lub Oil Drain

1 2 1 1 1 1 1

Page 19

M8 x 1.25 M6 x 1.00 x 20 M8 x 1.25 x 16

Group No. 17.08

Refrigerant Compressor

Page 20

Option No. CF9073

Group No. 17.08

Refrigerant Compressor

Ref No.

Part Name

Part Number

Req

Option No. CF9073 Remarks

REFRIGERANT COMPRESSOR OPTION CF9073

MR - REFRIGERANT COMPRESSOR MOUNTING Engine Family: C & L Series Engine Design Phase: L Gas Plus Compressor Manufacturer / Model: Sanden 4603 Compressor Supplier: Customer Mounting Supplied: Yes Refrigerant Compressor Support Type: 83.2mm Spool Required Front Face of Block to Centerline of Groove (mm): 105.3 Drive From: Bolt-On Accessory Drive (PA Option)

1 2 3 4 5 6 7 8

3900634 3902662 3903210 3916518 3925344 3943793 3944718 3945206

Screw, Hex Flange Head Cap Nut, Hexagon Flange Nut, Hexagon Flange Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap End, Adjusting Link Support, Ref Compressor Link, Adjusting

2 2 1 1 4 1 1 1

Page 21

M10 x 1.50 x 50 M10 x 1.50 M12 x 1.75 M10 x 1.50 x 125 M10 x 1.50 x 30

Group No. 10.02

Ref No.

Coolant Heater Starting Aid

Part Number

Part Name

Option No. CH9066

Req

Remarks

COOLANT HEATER STARTING AI OPTION CH9066

MR - AID, COOLANT HEATER STARTING Provision for Customer Supplied Coolant Heater or When No Heater is Required Tapping Provision: 3/4 in. NPTF Crank Centerline to Tapping Provision (mm): 252 Engine Centerline to Tapping Provision (mm): -181 Front Face of Block to Tapping Provision Centerline (mm): -138 Engine Family: C & L Series Plug Installed

1

3008469

Plug, Pipe

1

Page 22

3/4 NPT

Group No. 10.02

Ref No.

Coolant Heater Starting Aid

Part Number

Part Name

Option No. CH9087

Req

Remarks

COOLANT HEATER STARTING AI OPTION CH9087

MR - COOLANT HEATER STARTING AID Coolant Port Plumbing Location: Closed

1

3008469

Plug, Pipe

1

Page 23

3/4 NPT

Group No. 01.02.2

Ref No.

Part Number

Vibration Damper

Part Name

Option No. DA9153

Req

Remarks

VIBRATION DAMPER OPTION DA9153

MR - DAMPER, VIBRATION Design Phase: Pegasus Beta Engine Family: L Series Engine Cylinders: 6 Damper Diameter (mm): 280 Damper Type: Viscous Damper Mounting Hole Pattern: Pattern: 5 x 15.75 mm Damper Mounting Bolt Circle Diameter (mm): 55 Pulley Drive Profile: Poly V 8 Rib K Drive Pulley Diameter Over 2.5mm Balls (mm): 199.42 Front Face of Block to Centerline of First Pulley Groove (mm): 57.1 Front PTO Provision: No Auxilary Drive Pulley Provision: No

1 2 3 4

3914118 3967014 3943661 (3943663) (3943665)

Screw, Hex Flange Head Cap Damper, Vibration Pulley, Crankshaft Pulley, Crankshaft Adapter, Crankshaft

5 1 1 1 1

Page 24

M14 x 1.50 x 60

Group No. 09.04 Ref No.

Part Number

Front Gear Train Accessory Mounting Part Name

Req

Option No. DF9706 Remarks

FRNT GEAR TRAIN ACCY DRIVE OPTION DF9706

MR - FRONT GEAR TRAIN ACCESSORY DRIVE MOUNTING Front Gear Drive PTO: Customer Supplied Compressor or No Compressor Provision No Hydraulic Pump Drive Adapter Gear Housing Pilot Bore (mm): 114.7 Gear Housing Accessory Drive Mounting Provision: 2 x M12 x 1.75 Gear Housing Accessory Drive Mounting Bolt Circle Diameter (mm): 146 Cover Plate Provided: Yes Includes Plugs to Plug Compressor Water/Air Provision

3940246 3940245 3901249 3008468 3008469

Plate, Cover Gasket, Hydraulic Pump Screw, Hex Flange Head Cap Plug, Pipe Plug, Pipe

1 1 2 1

Page 25

M12 x 1.75 x 25 1/2 NPT 3/4 NPT

Group No. 99.01 Ref No.

Part Number

SOFTWARE,CUS INTERFACE Part Name

Req

Option No. DO90269 Remarks

SOFTWARE,CUS INTERFACE OPTION DO90269

Mr - customer interface software Engine Control System: P2 I Transmission: Generic Commun Support: J1939, J1708 cust/OEM name: Generic cust/OEM model: Generic cust/OEM app: Generic Remote Throttle: N High Idle: 2280 RPM Low Idle: 750 RPM ISC enable: On ISC Validation: Off switch speed input: No Torque Curve Selection: No ASG/axg/min/ max: ASG governor droop: 7% idle validation: No Multiple Unit Synchronization: N/A Output Driver Setup: Yes Calibration Voltage: 24 Throttle Type: Williams comment: N/A power match: No guid: N/A governor break: 2030 RPM engine brake provision: No electronic fan clutch: Yes Oil Pressure Sensor Type: Sensor Engine Family: Qsl applicable FR option: FR91709.

Page 26

Group No. 08.07

Ref No.

Thermostat

Part Number

Part Name

Option No. EC9702

Req

Remarks

THERMOSTAT OPTION EC9702

MR - THERMOSTAT Thermostat Used on C & L Series Engines 180 Degree F Opening

1

4930594

Thermostat

1

Page 27

Group No. 13.02.3

Alternator Mounting

Page 28

Option No. EH97402

Group No. 13.02.3 Ref No.

Part Number

Alternator Mounting Part Name

Option No. EH97402

Req

Remarks

ALTERNATOR MOUNTING OPTION EH97402

MR - MOUNTING, ALTERNATOR Design Phase: Pegasus/Elite II Engine Family: Centerline Engine Cylinders: 6 Alternator Pulley Location: From Engine Centerline (mm): -324.2287 From Crank Centerline (mm): 287 Alternator Pulley Diameter Over 2.5mm Gage Balls (mm): 67.45 Pulley Retainer Provided: No Crankshaft Drive Pulley Diameter Over 2.5mm Gage Balls (mm): 199.42 Alternator Drive Ratio: 2.9:1 Alternator Pulley Location: Front Face of Block to Centerline of First Groove (mm): 57.1 Ref. Compressor Mounting Provision : N/A Tensioner Pivot Location: From Engine Centerline (mm): -235.7 From Crank Centerline (mm): 134.0 Tensioner Spring Rate (in/lbs): 550 Tensioner Angle of Travel (deg): 52 To Suit Alternator Manufacturing/Model: Leece Neville 2300 JB Up to 28V/65A Leece Neville 2500 JB Up to 28V/60A Leece Neville 4000 Up to 28V/100A Leece Neville 4864J 14V/270A

1 2 3 4 5 6 7 8 9 10 11 12 13

3052061 3093826 3903105 3903112 3903210 3910901 3935229 3944405 3976754 3965146 3970946 3975326 3978324

Screw, Hexagon Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Nut, Hexagon Flange Screw, Hex Flange Head Cap Shaft, Idler Support, Alternator Brace, Alternator Pulley, Alternator Shield, Dust Support, Idler Pulley Pulley, Idler

1 3 1 3 1 1 1 1 1 1 1 1 1

Page 29

1/2 - 13 x 1 in.

M12 x 1.75 x 150 M10 x 1.50 x 30 M12 x 1.75 M10 x 1.50 x 55

Group No. 16.03

Ref No.

Part Number

Front Engine Support

Part Name

Option No. EM9253

Req

Remarks

FRONT ENGINE SUPPORT OPTION EM9253

MR - SUPPORT, FRONT ENGINE Support Location: Front Support Type: Pad Mount Type: 3 Hole Mounting Hole Size: 1 x 18mm, 2 x 22mm Mount Material: 41025 Crank Centerline to Mounting Surface (mm): -189 Maximum Damper Diameter (mm): 275.58

1 2

3902451 3991895

Screw, Hex Flange Head Cap Support, Front Engine

4 1

Page 30

M12 x 1.75 x 90

NOTES

Group No. 08.03

Fan Drive

Page 32

Option No. FA9313

Group No. 08.03 Ref No.

Part Number

Fan Drive Part Name

Option No. FA9313 Req

Remarks

FAN DRIVE OPTION FA9313

MR - DRIVE, FAN Design Phase: Pegasus/Elite II Engine Family: C & L Engine Cylinders: 6 Bearing Design: Single Double Row Dynamic Bearing Load Capability (lb): TBD Fan Ratio: 1.1:1 Fan Center (mm): 343 Support Mounting: 4 x M10 x 1.5 Fan Pulley Diameter Over 2.5mm Balls: 181 Fan Pulley Material: Spun Steel Fan Pulley Location (mm): Front Face of Block to Centerline of First Pulley Groove (mm): 57.1 Fan Pulley Mounting Flange Thickness (mm): 2.95 Accessory Drive Pulley Mounting Provision: M10 x 1.5 Accessory Drive Mounting Location (mm): From Front Face of Block to Mounting Surface: 128.3 Accessory Drive Mounting BCD (mm): 4 x 60 Pulley Groove Profile: Poly V 8 Rib K Fan Spacer Pilot Diameter (mm): 25.4 Required Drive Pulley Diameter Over 2.5mm Balls: 199.42 Drive Hardware Supplied: Fan Pulley and Fan Support

1 2 3 4 5 6 7 8

3942896 (3942895) 3910739 3911924 3923044 3907769 3035960 3900634 3926855

Support, Fan Support, Fan Bearing, Ball Hub, Fan Retainer, Fan Hub Screw, Hexagon Head Cap Ring, Retaining Screw, Hex Flange Head Cap Pulley, Fan

1 1 1 1 1 1 2 4 1

Page 33

M10 x 1.75 x 70 M10 x 1.50 x 50

Group No. 08.03

Ref No.

Part Number

Fan Drive Mounting

Part Name

Option No. FA9735

Req

Remarks

FAN DRIVE MOUNTING OPTION FA9735 Fastener length: 30mm Thread size: M10X1.5-6 h Clamping plate thickness: 8.4mm.

1 2

3915490 3903112

Plate, Clamping Screw, Hex Flange Head Cap

1 4

Page 34

M10 x 1.50 x 30

NOTES

Group No. 06.04.1

Fuel Filter Plumbing

Page 36

Option No. FF9425

Group No. 06.04.1 Ref No.

Part Number

Fuel Filter Plumbing Part Name

Option No. FF9425

Req

Remarks

FUEL FILTER PLUMBING OPTION FF9425

MR - PLUMBING, FUEL FILTER Fuel Filter Outlet Port Location: Centerline of Crank to Centerline of Outlet (mm): 326 Centerline of Engine to Centerline of Outlet (mm): 257.725 Front Face of Block to Outlet (mm): -601.56 Fuel Filter Inlet Port Location: Centerline of Crank to Centerline of Inlet (mm): 326 Centerline of Engine to Centerline of Inlet (mm): (mm): 257.725 Front Face of Block to Inlet (mm): -695.44 Engine Family: C & L Series Design Phase: Pegasus

1 2 3 4 5 6

3925883 3963990 3966130 3966851 3969822 3979330

Screw, Hex Flange Head Cap Washer, Sealing Tube, Fuel Supply Brace, Tube Connection, Adapter Tube, Fuel Supply

1 2 1 1 2 1

Page 37

M8 x 1.25 x 16

Group No. 06.04

Fuel Filter

Page 38

Option No. FF9587

Group No. 06.04 Ref No.

Part Number

Fuel Filter Part Name

Option No. FF9587 Req

Remarks

FUEL FILTER OPTION FF9587

MR - FILTER, FUEL Element Type: Single Element Style: Spin-On Drain Provision: No Fuel Heater Voltage: No Water Separator Provision: No Water In Fuel Sensor (WIF): No Location: Engine Mounted Crank Centerline to Top of Canister (mm): 308.23 Engine Centerline to Canister Centerline (mm): -648.5 Front Face of Block to Top of Canister (mm): -619.1 Filter Length (mm): 200 Fuel Filter Fuel Inlet Location: Crank Centerline to Inlet Centerline (mm) 326 Engine Centerline to Inlet Centerline (mm): 257.725 Front Face of Block to Inlet Centerline (mm): -695.44 Fuel Filter Fuel Outlet Location: Crank Centerline to Outlet Centerline (mm): 326 Engine Centerline to Outlet Centerline (mm): 257.725 Front face of Block to Outlet Centerline (mm): -601.56 Absolute Filtration (Microns): 3 Media: Fleetguard 934 Media Engine Family: C & L Series Design Phase: Pegasus

1 2 3 4 5 6 7 8 9 10

3089016 3902114 3965155 3972686 (3972835) 3976312 3678923 (3678924) 3678925 3959613 3969680 3973232

Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Support, Filter Screw, Hex Flange Head Cap Decal Filter, Fuel Plug, Threaded Plug, Threaded Seal, O Ring Adapter, Filter Head Head, Fuel Filter Filter, Fuel

2 2 1 2 1 1 2 1 1 1 1 1

Page 39

M10 x 1.50 x 35 M8 x 1.25 x 30

M10 x 1.00 x 9.5 M10 x 1.00 x 9.5 M10 x 1.00

Group No. 16.01

Flywheel Housing

Page 40

Option No. FH9356

Group No. 16.01 Ref No.

Part Number

Flywheel Housing Part Name

Option No. FH9356 Req

Remarks

FLYWHEEL HOUSING OPTION FH9356

MR - FLYWHEEL HOUSING Item Supplied: Flywheel Housing Flywheel Housing SAE Size: 2 Clutch Type: Dry Starter Bore Position: 49 Flywheel to Block Mounting Pattern: 12 x M12 x 1.75 Starter Motor Flange SAE Type: SAE#3 3 Bolt 120 Starter Pilot Bore Diameter (mm): 106 Starter Bore Horizontal Distance (mm): 181.29 Starter Bore Vertical Distance (mm): 157.59 Starter Bore Center Distance (mm): 240.21 Starter Bore Angle from Horizontal Centerline: 41 Angle to Starter Bore Mounting Hole Pattern: 42 Starter Mounting Hole Thread Size: M12 Starter Mounting Face Offset : 0 Rear Engine PTO Includes: No Material: Cast Iron; 40001 Engine Mount Type: Pad Mounting Pad Hole Description: 6 x M12 x 1.75 Mounting Pad Top Hole Location (mm): 104.78 Mounting Pad Angle: 0 Transmission Mounting Hole Thread/Count: 12 x M10 x 1.5 Tachometer Drive Location Size: Quad 4, 3/4-16 Tachometer Sensor Mounting Hole Count: 1 Engine Family: C & L Series

2 3 4 5 7 8 9 10 11 12 13 14

3352392 3900225 3904181 3925234 3910248 3910260 3920447 3357700 3933384 3970548 3912473 3991306 3939353

Housing, Flywheel Screw, Hexagon Head Cap Plug, Threaded Plate, Cover Plug, O Ring Seal, O Ring Screw, Hex Flange Head Cap Cover, Rear Cover, Rear Seal, Oil Seal, Rectangular Ring Screw, Hex Flange Head Cap Gasket, Rear Cover

1 2 1 1 1 1 12 1 1 1 1 8 1

Page 41

M8 x 1.25 x 16 3/4 - 16 UNF

M12 x 1.75 x 40 Includes Installation Tools Sold In Higher Level Assy/Kit M6 x 1.00 x 16

Group No. 06.02

Ref No.

Fuel Inlet Fitting

Part Number

Part Name

Option No. FI9020

Req

Remarks

FUEL INLET FITTING OPTION FI9020

MR - FITTING, FUEL INLET Fuel Inlet Fitting Supplier: Cummins Fuel Inlet Fitting Type: Straight Orientation: Horizontal, Pointing Rearward Centerline of Engine to OEM Attachment (mm): 126 Centerline of Crank to OEM Attachment (mm): 319 Front Face of Block to OEM Attachment (mm): -894 OEM Attachment: 7/8-14 UNF, 45 Degree Flare

1 2

129866 3040817 (3100516)

Union, Male Seal, O Ring Union, Male

1 1 1

Page 42

Service Replacement 3040817 7/8-14 x 7/8-14

NOTES

Group No. 05.03

Fuel Pump Mounting

Page 44

Option No. FP90238

Group No. 05.03 Ref No.

Part Number

Fuel Pump Mounting Part Name

Option No. FP90238

Req

Remarks

FUEL PUMP MOUNTING OPTION FP90238

MR - MOUNTING, FUEL PUMP Fuel Pump Manufacturer/Model: CAPS II Engine Family: C & L Series Engine Design Phase: Pegasus Fuel Pump Mounting Pilot Bore Diameter (mm): 107 Fuel Pump Mounting Flange Bolt Circle Diameter (mm): 130 Fuel Pump Mounting Holes: 4 x M12 Thru

1 2 3 4 5 6 7 8

3899283 3902116 3902662 3904446 3926722 3937123 3942764 3979337

Seal, O Ring Screw, Hex Flange Head Cap Nut, Hexagon Flange Screw, Hex Flange Head Cap Seal, Rectangular Ring Stud Gear, Fuel Pump Support, Fuel Pump

1 1 4 1 1 4 1 1

Page 45

M12 x 1.75 x 50 M10 x 1.50 M10 x 1.50 x 70 M10 x 1.50 (Both Ends) x 50

Group No. 05.21

Fuel Pump

Page 46

Option No. FP90239

Group No. 05.21 Ref No.

Part Number

Fuel Pump Part Name

Option No. FP90239 Req

Remarks

FUEL PUMP OPTION FP90239

MR - PUMP, FUEL Fuel Pump Manufacturer/Model: CAPS II Engine Family: C & L Series Engine Design Phase: Pegasus Pegasus CPL: 8535, 8536, 8537, 8538, 8539, 8569, 8547, 8548, 8549, 8550, 8551, 8552, Fuel Pump Mounting Pilot Bore Diameter (mm): 107 Fuel Pump Mounting Flange Bolt Circle Diameter (mm): 130 Fuel Pump Mounting Holes: 4 x M12 Thru Fuel Pump Inlet Port Location: Centerline of Engine Inlet Port (mm): 289.51 Centerline of Crank to Inlet Port (mm): 474.71 Front Face of Block to Inlet Inlet Port (mm): -140.38 Fuel Pump Outlet Port Location: Centerline of Engine to Inlet Port (mm): 295.18 Centerline of Crank to Inlet Port (mm): 421.15 Front Face of Block to Outlet Port (mm): -176.15 Lift Pump Inlet Port: TBD Lift Pump Inlet Port Location: Centerline of Engine to Inlet Port (mm): TBD Centerline of Crank to Inlet Port (mm): TBD Front Face of Block to Inlet Port (mm): TBD Lift Pump Outlet Port Location: Centerline of Engine to Inlet Port (mm): TBD Centerline of Crank to Inlet Port (mm): TBD Front Face of Block to Outlet Port (mm): TBD Unique Characteristics: Incorporates Gear Driven Lift Pump at Rear of Fuel Pump Assembly Incorporates 3 Quick Connect Fittings for Automotive Arrangements with Direct Mounted Filters

1 2 3 4 5 6 7 8

3973228 3963990 3969822 4921431 (4088604) (4088866) 4902732 4902780 4921432 4921436

Assembly, Fuel Pump Washer, Sealing Connection, Adapter Pump, Fuel Body, Fuel Pump Pump, Fuel Head, Fuel Pump Gasket, Cover Plate Adapter, Fuel Pump Gasket, Fuel Pump

1 3 3 1 1 1 1 1 1 1

Page 47

Individual Parts Available Recon Equivalent 4921431 NX Recon Equivalent 4088604 NX Buy From Recon as NX or RX Recon Equivalent 4902732 NX

Group No. 99.01 Ref No.

Part Number

RATING,FUEL Part Name

Option No. FR91709 Req

RATING,FUEL OPTION FR91709

Page 48

Remarks

NOTES

Group No. 06.05

Fuel Transfer Pump

Page 50

Option No. FS9746

Group No. 06.05 Ref No.

Part Number

Fuel Transfer Pump Part Name

Option No. FS9746

Req

Remarks

FUEL TRANSFER PUMP OPTION FS9746

MR - FUEL TRANSFER PUMP Engine Design Phase: Pegasus Engine Cylinders: 6 Engine Family: C & L Series Fuel Transfer Pump Voltage: 24

1 2 3 4 5 6 7 8 9 10 11

3903035 3913638 3955110 3963988 3963990 3966317 3966320 3967782 3968190 3955114 (3968189) 3972088

Screw, Banjo Connector Screw, Hex Flange Head Cap Bracket, Transfer Pump Washer, Sealing Washer, Sealing Tube, Fuel Supply Tube, Fuel Supply Valve, Check Pump, Fuel Transfer Isolator, Vibration Pump, Fuel Transfer Connection, Adapter

2 4 2 2 6 1 1 1 1 2 1 1

Page 51

M12 x 1.50 x 24 M6 x 1.00 x 16 M14

Sold In Higher Level Assy/Kit

Group No. 06.03

Fuel Plumbing

Page 52

Option No. FT9028

Group No. 06.03 Ref No.

Part Number

Fuel Plumbing Part Name

Option No. FT9028 Req

Remarks

FUEL PLUMBING OPTION FT9028

MR - PLUMBING, FUEL Fuel Pump Drain Location: Centerline of Crank to OEM Attachment (mm): 484.3 Centerline of Engine to OEM Attachment (mm): 261.3 Front Face of Block to OEM Attachment (mm): -140.3 Common Rail Drain Valve Location: Centerline of crank to OEM attachment (mm): 401.02 Centerline of Engine to OEM Attachment (mm): 308.40 Front Face of Block to OEM Attachment (mm): -503.00 Cylinder Head Drain Location: Centerline of Crank to OEM Attachment (mm): 440.52 Centerline of Engine OEM Attachment (mm): 15.50 Front Face of Block to OEM Attachment (mm): -851.00 OEM Interface Location: Centerline of Crank to OEM Attachment (mm): 326 Centerline of Engine to OEM Attachment (mm): 129 Front Face of Block to OEM Attachment (mm): -886.63 OEM Attachment: 3/4-16-UNF, 45 Degree Flare Drain Fitting Type: Straight

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

3061833 3046201 (3061832) 3089016 3629452 3903035 3903990 3924725 3957290 3963988 3963990 3966656 3968424 3968426 3968427 3977851

Union, Male Seal, O Ring Union, Male Screw, Hex Flange Head Cap Clip Screw, Banjo Connector Screw, Hex Flange Head Cap Screw, Banjo Connector Valve, Check Washer, Sealing Washer, Sealing Connection, Fuel Block Tube, Fuel Drain Tube, Fuel Drain Tube, Fuel Drain Plug, Threaded

1 1 1 2 1 4 1 1 1 3 9 1 1 1 1 1

Page 53

Use 3046201 Replacement Seal M12 x 1.50 x 24 M10 x 1.50 x 20 M14 x 1.50 x 26 M14

Group No. 16.02

Flywheel

Page 54

Option No. FW9520

Group No. 16.02 Ref No.

Part Number

Flywheel Part Name

Option No. FW9520 Req

Remarks

FLYWHEEL OPTION FW9520

MR - FLYWHEEL Ring Gear Diametral Pitch: 8/10 Ring Gear Tooth Count: 138 Ring Gear Outside Diameter (mm): 442.77 Supplier: Cummins Type: Flywheel Max Full Load Rated Speed (Not to Exceed): 3700 Flywheel Inertia: 1.17 Flywheel Mounting Flange to Ring Gear Leading Edge (mm): 9.07 Mounting Web Thickness (mm): 16 Pilot Bearing Bore Diameter (mm): 71.973 Clutch/T.C. Mounting Bolt Circle Count: Single Clutch/T.C. Mounting Hole Count: 8 Clutch/T.C. Bolt Circle Diameter (mm): 333.38 Clutch/T.C. Mounting Hole Spacing: Equal Clutch/T.C. Mounting Hole Size: 3/8-16 UNC 2nd Clutch/T.C. Mounting Hole Count: N/A 2nd Clutch/T.C. Bolt Circle Diameter (mm): N/A 2nd Clutch/T.C. Mounting Hole Spacing: N/A 2nd Clutch/T.C. Mounting Hole Size: N/A Cummins Material Standard: 41044 Intended Drive Hardware: 11.5 inch OC Clutch

1 2

3906809 3902127 (3906808)

Flywheel Gear, Flywheel Ring Flywheel

1 1 1

Page 55

Group No. 16.02.1

Ref No.

Part Number

Flywheel Mounting

Part Name

Option No. FW9704

Req

Remarks

FLYWHEEL MOUNTING OPTION FW9704

MR - MOUNTING, FLYWHEEL Bolt Length (mm): 32 Flywheel Web Thickness (mm): 16 To Suit REPTO: No

1 2

3901395 3900269

Screw, Hexagon Head Cap Washer, Plain

8 8

Page 56

M12 x 1.25 x 32 M12

Group No. 01.06

Ref No.

Part Number

Gear Cover Mounting

Part Name

Option No. GG9804

Req

Remarks

GEAR COVER MOUNTING OPTION GG9804

MR - MOUNTING, GEAR COVER Accessory Support Attachment Supplied: None 2 Capscrews Supplied

1

3925883

Screw, Hex Flange Head Cap

2

Page 57

M8 x 1.25 x 16

Group No. 01.06

Front Gear Cover

Page 58

Option No. GG9829

Group No. 01.06 Ref No.

Part Number

Front Gear Cover Part Name

Option No. GG9829 Req

Remarks

FRONT GEAR COVER OPTION GG9829

MR - FRONT GEAR COVER Breather Provision: No To Suit Gear Housings with the Folling: Centerline of Crank to Centerline of PTO Provision (mm): 39.5 Centerline of Engine to Centerline of PTO Provision (mm): 227.4 Drive Ratio: 1:1 Gear Housing Pilot Bore (mm): 114.7 Dust Shield : Yes

1 2 3 4 5 6 7

3938077 3925883 3926863 (3942535) 3921927 3941786 3958112 3918113

Nut, Lock Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Seal, Oil Seal, Oil Carrier, Seal Cover, Gear Shield, Dust

5 13 11 1 1 1 1 1

Page 59

M8 x 1.25 x 16 M8 x 1.25 x 50 Sold In Higher Level Assy/Kit Sold In Higher Level Assy/Kit

Group No. 08.13.1

Cabin Heater Plumbing

Ref No.

Part Name

Part Number

Option No. HC9046

Req

Remarks

CABIN HEATER PLUMBING OPTION HC9046

MR - PLUMBING, CABIN HEATER Plumbing Supplier: Customer Available Plumbing Ports for Customer Adaptation Cylinder Block: (2 x 3/4 in. NPTF, 2 1.19 in. Thru) #1 Provision:

1 2 3

156075 3008468 4933532

Plug, Expansion Plug, Pipe Plug, Pipe

2 4 2

Page 60

1 3/16 in.

1/2 NPT 3/4 NPT

NOTES

Group No. 10.01.2

Air Intake Connection

Page 62

Option No. IC9360

Group No. 10.01.2 Ref No.

Part Number

Air Intake Connection Part Name

Option No. IC9360

Req

Remarks

AIR INTAKE CONNECTION OPTION IC9360

MR - AIR INTAKE CONNECTION Design Phase: Pregaus Engine Family: ICS/ISL Engine Cylinders: 6 Engine Aspiration: CAC Engine Intake Provision: Side Out Connection Supplier: Cummins Connection Style: 45 Degree Elbow Connection Orientation: Horizontal Pointing Forward / Outward Connection Outside Diameter (mm): 101.6 (4 in.)

1 2 3 4

3067979 3682177 3682675 3968371

Clamp, V Band Seal, O Ring Connection, Air Transfer Connection, Air Intake

1 1 1 1

Page 63

Group No. 10.01.2

Ref No.

Part Number

Air Intake Connection Mounting

Part Name

Req

Option No. IC9426

Remarks

AIR INTAKE CONNECTION MTG OPTION IC9426

MR - MOUNTING, AIR INTAKE CONNECTION Intake Connection Flange Thickness: 2mm x 12mm, 2mm x 123mm Air Heater Specified: Yes Air Heater Thickness (mm): 38

1 2 3

3943682 3902112 3975487

Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Gasket, Connection

2 2 1

Page 64

M8 x 1.25 x 160 M8 x 1.25 x 80

Group No. 10.01

Ref No.

Part Number

Air Intake Manifold

Part Name

Option No. IM9077

Req

Remarks

AIR INTAKE MANIFOLD OPTION IM9077

MR - MANIFOLD, AIR INTAKE Manifold Mounting Hole Pattern: 14 x 9.5mm Thru Holes 64.5 x Irregular Spacing Engine Cylinders: 6 Integral Intake Connection: No Integral Air Heater: No Mating Flange Bolt Hole Description: 4 x 9.55mm Thru Holes 64.5 Irregular Spacing Cover Plate/Intake Flange Thickness (mm): 11 Unique Charactertics: To Accommodate Use of Combination Pressure and Temp Sensor

1 2 3

3902114 3976716 3999620

Screw, Hex Flange Head Cap Cover, Intake Manifold Screw, Hex Flange Head Cap

13 1 1

Page 65

M8 x 1.25 x 30

Group No. 10.01.2

Air Transfer Connection

Ref No.

Part Name

Part Number

Option No. IT9043

Req

Remarks

AIR TRANSFER CONNECTION OPTION IT9043

MR - CONNECTION, AIR TRANSFER Connection Supplier: Cummins Connection Type: 90 Degree Elbow Orientation: Rotatable Engine Interface Flange Type: Half Marmon Engine Interface Flange Diameter (mm): 73.85 (3 in.)

Engine Interface Flange Thickness (mm): 6.4 OEM Interface Connection Diameter (mm): 101.5 OEM Interface Connection Clamping Surface (mm): 56.5 Turbocharger Interface to Centerline OEM Interface (mm): 95.2 OEM Interface to Centerline Turbocharger Interface (mm): 123 Customer Tapping: 2 x 1/8 Pipe Tap Thru Supply Method: Mounted

1 2 3 4

3008465 3883284 3883977 3972681

Plug, Pipe Seal, O Ring Pipe, Air Transfer Clamp, V Band

2 1 1 1

Page 66

1/8 NPT

Group No. 17.06

Ref No.

Part Number

Lifting Arrangement

Part Name

Option No. LA9121

Req

Remarks

LIFTING ARRANGEMENT OPTION LA9121

MR - MOUNTING, LIFTING BRACKET Rear Bracket Mounting: Yes, 2 Screws Front Bracket Mounting: No Unique Characteristics: For Use When FEAD Arrangement Requires a Three Bolt Idler Support to be Mounted Along With the Front Lifting Bracket Bolts Structured with Idlers Support in EH Option

1

3901249

Screw, Hex Flange Head Cap

2

Page 67

M12 x 1.75 x 25

Group No. 17.06

Ref No.

Lifting Arrangement

Part Number

Part Name

Option No. LA9151

Req

Remarks

LIFTING ARRANGEMENT OPTION LA9151

MR - ARRANGEMENT, LIFTING Brackets Provided: Front and Rear Front Bracket Location: Front Face of Cylinder Block Centerline of Engine to Eye Centerline (mm): -133 Centerline of Engine to Eye Centerline (mm): -122 Centerline of Crankshaft to Eye Centerline (mm): 499 Front Face of Block to Eye Centerline (mm): 3.2 Rear Bracket Location: Rear Face of Cylinder Head Engine Family: C Series Maximum Lifting Load (lbs.): 2800

1 2

3959113 4935680

Bracket, Lifting Bracket, Lifting

1 1

Page 68

NOTES

Group No. 07.05

Engine Oil Cooler

Page 70

Option No. LC9765

Group No. 07.05 Ref No.

Part Number

Engine Oil Cooler Part Name

Option No. LC9765 Req

Remarks

ENGINE OIL COOLER OPTION LC9765

MR - COOLER, ENGINE OIL Type: 15 Plate Mounting Location: Block Cavity Exhaust Side Pressure Relief Valve: Yes Oil Flow Thermostat: Yes Unique Characteristics: Includes 3 Studs for OEM Attachment Provision

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

3008468 3008469 3906619 3918174 3929011 3931084 (3930910) 3930911 3934410 3201562 (3934278) 3944874 3945967 3966365 3966976 3970655 3974326 118227 3907860 3936365 (3966885) (3974324) 3992092

Plug, Pipe Plug, Pipe Plug, Pipe Gasket, Oil Cooler Core Gasket, Lub Oil Clr Cover Plug, Threaded Plug, Threaded Seal, O Ring Valve, Bypass Seal, O Ring Valve, Bypass Screw, Hex Flange Head Cap Plunger, Prs Regulator Core, Cooler Screw, Hex Flange Head Cap Spring, Compression Head, Lub Oil Filter Dowel, Ring Screw, Hex Flange Head Cap Valve, Pressure Relief Head, Lub Oil Filter Cover, Lub Oil Cooler Gasket, Connection

1 1 1 1 1 1 1 1 1 1 1 3 1 1 8 1 1 1 4 1 1 1 1

Page 71

1/2 NPT 3/4 NPT 1/8 NPT

M8 x 1.25 x 25

Group No. 07.03

Lubricating Oil Filter

Page 72

Option No. LF9165

Group No. 07.03 Ref No.

Part Number

Lubricating Oil Filter Part Name

Option No. LF9165

Req

Remarks

LUBRICATING OIL FILTER OPTION LF9165

MR - FILTER, LUBRICATING OIL Filter Head Location: Remote Mounted by the Customer Hose Color: Black Hose to be Supplied In Kit Component Logo: None

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

3013786 3027728 3049010 4063970 3393258 4063933 3864213 3899283 3899624 3899625 3899728 3902460 3910901 3973686 4063971

Plug, Pipe Spacer, Mounting Elbow, Male Union Hose, Flexible Elbow, Male Adapter Head, Lub Oil Filter Bracket, Filter Seal, O Ring Cover, Filter Head Adapter, Filter Head Seal, O Ring Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Element, Lub Oil Filter Hose, Flexible

1 1 1 1 1 1 1 1 1 1 1 4 1 1 1

Page 73

3/8 NPT

M10 x 1.50 x 25 M10 x 1.50 x 55

Group No. 07.02

Oil Level Gauge

Page 74

Option No. LG9968

Group No. 07.02 Ref No.

Part Number

Oil Level Gauge Part Name

Option No. LG9968 Req

Remarks

OIL LEVEL GAUGE OPTION LG9968

MR - OIL LEVEL GAUGE Dipstick Supplier: Cummins Dipstick Location: Fuel Pump Side Dipstick Pull Location: From Crank Centerline (mm): Customer Determined From Engine Centerline (mm): Customer Determined From Front Face of Block (mm): 428 Dipstick Calibration: Bfob - Full/Low 0-5 Degrees: 71/91 Power Angle (deg): 0 Engine Tilt (deg): 0 Tube Effective Length (mm): 1178.6 Family: L Series Unique Characteristics: Support End Tube Will Be Installed By the Customer

1 2 3

3973337 3973338 3968447 3943808

Dipstick Dipstick Tube, Oil Gauge Plug, Expansion

1 1 1 1

Page 75

Group No. 07.01.3

Ref No.

Lube Oil

Part Number

Part Name

Option No. LO9701

Req

Remarks

LUBE OIL OPTION LO9701

MR - TAG, LUBRICATING OIL Tag Identification: No Oil Tag Location: Front Lifting Bracket In Place of P/N 3916103: BZL May Use P/N 3352918 CMEP May Use P/N 3967353

1

(3916103)

Tag, Instruction

1

Page 76

Group No. 07.06

Ref No.

Part Number

Lube Oil Pump

Part Name

Option No. LP9724

Req

Remarks

LUBE OIL PUMP OPTION LP9724

MR - PUMP, LUBRICATING OIL Flow Rate @ Pump Speed (GPM @ RPM): TBD at TBD Gear Type: HCR Spur Gear Pump Drive: Non Crank Concentric DCEC May Use Part Number 4941464 in Place of 3991123

1 2

3991123 3900677

Pump, Lubricating Oil Screw, Hexagon Head Cap

1 4

Page 77

M8 x 1.25 x 30

Group No. 07.02

Ref No.

Part Number

Oil Filler Arrangement

Part Name

Req

Option No. OB9341

Remarks

OIL FILLER ARRANGEMENT OPTION OB9341

MR - ARRANGEMENT, OIL FILLER Oil Fill Location: Front Gear Cover Fill Position From Front Face of Block (mm): 77.3 Position Vertical from Crank Centerline (mm): 382.1 Position Horizontal from Crank (mm): 273.4 Fill Tube Supplier: Customer Engine Family: C & L Series Unique Characteristics: Includes Push On Hose Fitting for 38 mm (1.5 in.) ID Hose for Customer Supplied Oil Fill Front Fill Orientation: 45 Degree +/- Degree Outboard

1 2

3903475 3924595

Seal, Rectangular Ring Connection, Oil Filler

1 1

Page 78

Group No. 01.08

Ref No.

Part Number

Cylinder Block Cover

Part Name

Option No. OB9363

Req

Remarks

CYLINDER BLOCK COVER OPTION OB9363

MR - COVER, CYLINDER BLOCK Oil Fill Provision: Front Gear Cover Engine Family: Pegasus C & L Series

1 2 3 4

3964393 3920706 3906696 3910495

Connection, Oil Drain Plug, Expansion Seal, Rectangular Ring Screw, Hex Flange Head Cap

1 1 1 2

Page 79

Not Used On Engines W/Turbos M12 x 1.75 x 30

Group No. 07.01

Oil Pan

Page 80

Option No. OP9338

Group No. 07.01 Ref No.

Part Number

Oil Pan Part Name

Option No. OP9338 Req

Remarks

OIL PAN OPTION OP9338

MR - PAN, OIL Engine Family: L Series Cylinders: 6 Sump Style: Standard Sump Location: Rear Oil Pan Material: Stamped Steel Oil Pan Type: Non-Isolated Pan High Capacity (qt): 24 (22.706 L) Pan Low Capacity (qt): 20 (18.921 L) Pan Front Up Angularity (deg): 45 Pan Front Down Anglarity (deg): 45 Pan Side to Side Angularity (deg): 45 Drain Size: M18 Drain Location: Fuel Side Position from Front Face of Block (mm): 632.3 Position from Crank Centerline (mm): 375.6 Heater Boss Size: M22 x 1.5-6 H Heater Boss Location: Fuel Side Position from Front Face of Block (mm): 632.3 Position from Crank Centerline (mm): 278.6 Oil Level Sensor Tapping Size: 3/8 inch NPTF Oil Level Sensor Provision: Fuel Side Position from Front Face of Block (mm): 632.3 Position from Crank Centerline (mm): 205 Required Block Flange (mm): 282 x 883.5 Oil Pan Mounting Holes: 9mm Thru Holes Oil Pan/Block Mounting Holes: 24 Spacing: Equal, 78.5mm Oil Pan/Gear Housing Mounting Holes: 4 Spacing: Unequal Oil Pan/Flywheel Housing Mounting Holes: 4 Spacing: Unequal Doweled for Flywheel Housing: No Required Dipstick Calibration: BFOB-Full/Low (428) 0-5 Degrees: 76/96 Unique Characteristics: Pan Includes Full Perimeter Clamping Plates

1 2 3 4 5 6 7 8

3013786 3900628 3901865 3902425 3906216 3910960 3913638 3939352

Plug, Pipe Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Washer, Sealing Nut, Hexagon Flange Washer, Plain Screw, Hex Flange Head Cap Gasket, Oil Suc Connection

1 2 1 1 1 1 2 1

Page 81

3/8 NPT M6 x 1.00 x 30 M6 x 1.00 x 20 22mm M6 x 1.00 M6 M6 x 1.00 x 16

Group No. 07.01

Oil Pan

Page 82

Option No. OP9338

Group No. 07.01 Ref No.

Part Number

9 10 11 12 13 14 15 16 17

3907860 3920773 3924148 3924147 3926865 3927611 3973509 3974294 3964028

Oil Pan

Option No. OP9338

Part Name

Req

Screw, Hex Flange Head Cap Washer, Sealing Plug, Threaded Plug, Threaded Spacer, Mounting Brace, Tube Gasket, Oil Pan Pan, Oil Connection, Oil Suction

32 1 1 1 2 1 1 1 1

Page 83

Remarks M8 x 1.25 x 25 18mm M22 x 1.50 x 14 M18 x 1.50 x 12

Group No. 09.03

Accessory Drive Pulley

Ref No.

Part Name

Part Number

Req

Option No. PA9001

Remarks

ACCESSORY DRIVE PULLEY OPTION PA9001

MR - PULLEY, ACCESSORY DRIVE Pulley Diameter Over 11.112 mm Balls (mm): 182.81 Pulley Groove Profile: 12.7 mm, 36 Degree V Angle Mounting Provisions: 4 x 50 x 9 mm Thru; 4 x 60 x 11.25 mm Thru Pulley Mounting Face Location (mm): -22.95 To Determine On-Engine Groove Location from Front Face of Block, Add This Dimension to the Fan Hub Mounting Face Dimension Referenced in Compatible FA Options Pulley Material: Spun Steel Pulley Mounting Flange Thickness (mm): 2.28

1

3919624

Pulley, Accessory Drive

1

Page 84

Group No. 05.06.1

Ref No.

Part Number

Engine Control Module Plumbing

Part Name

Req

Option No. PH9055

Remarks

ENGINE CONTROL MODULE PLUM OPTION PH9055

MR - ENGINE CONTROL MODULE PLUMBING Fuel Inlet to ECM: From Fuel Manifold (FT Option) ERS: 6 Crank Centerline to Inlet Centerline (mm): 319 Engine Centerline to Inlet Centerline (mm): 185.27 Front Face of Block to Inlet Centerline (mm): -804.5 Fuel Outlet from ECM: To Gear Pump on Fuel Pump Crank Centerline to Inlet Centerline (mm): 367.6 Engine Centerline to Inlet Centerline (mm): 270.5 Front Face of Block to Inlet Centerline (mm): 141.9 Engine Mounted Lift Pump: Yes

1 2 3 4

3963990 3966128 3966129 3969822

Washer, Sealing Tube, Fuel Supply Tube, Fuel Supply Connection, Adapter

1 1 1 1

Page 85

Group No. 06.03

Engine Control Module Plumbing

Page 86

Option No. PH9055

Group No. 06.03 Ref No.

Part Number

Engine Control Module Plumbing Part Name

Req

Option No. PH9055 Remarks

ENG CNT MODULE PLUMBING OPTION PH9055

MR - PLUMBING, ENG CNT MODULE Gear Pump Inlet Port Location: Centerline of Crank to Centerline of Inlet (mm): TBD Centerline of Engine to Centerline of Inlet (mm): TBD Front Face of Block to Inlet (mm): TBD ECM Outlet Port Location: Centerline of Crank to Centerline of Outlet (mm): TBD Centerline of Engine to Centerline of Outlet (mm): TBD Front Face of Block to Outlet (mm): TBD ECM Inlet Port Location: Centerline of Crank to Centerline of Inlet (mm): TBD Centerline of Engine to Centerline of Inlet (mm): TBD Front Face of Block to Inlet (mm): TBD Fuel Connection Outlet Port Location: Centerline of Crank to Centerline of Outlet (mm): TBD Centerline of Engine to Centerline of Outlet (mm): TBD Front Face of Block of Engine to Centerline of Outlet (mm): TBD Front Face of Block to Outlet (mm): TBD Engine Family: C & L Design Phase: Pegasus Alpha

1 2 3 4

3963990 3966128 3969822 3979403

Washer, Sealing Tube, Fuel Supply Connection, Adapter Tube, Fuel Supply

1 1 1 1

Page 87

Group No. 01.06.1

Ref No.

Dataplate

Part Number

Part Name

Option No. PH9111

Req

Remarks

DATAPLATE OPTION PH9111

MR - DATAPLATE Engine Control System: PE1, PE2, P1I, P2I ECM Version: CM850 PV Module Location (mm): N/A Ambient Air Pressure Sensor: Yes Intake Manifold Pressure Sensor: Absolute Oil Pressure Sensor: Sensor Speed Sensor Location: Cam Engine Design Phase: Pegasus Engine Family: C & L Series Engine Position Sensor: Crank

1

3609867

Dataplate

1

Page 88

Group No. 05.06

Electronic Control Cooler

Ref No.

Part Name

Part Number

Req

Option No. PH9111

Remarks

ELECTRONIC CONTROL COOLER OPTION PH9111

MR - COOLER, ELECTRONIC CONTROL Engine Design Phase: Pegasus Engine Family: C & L Series

1

3970204

Cooler, Electronic Control

1

Page 89

Group No. 05.06.1

Engine Control Module

Page 90

Option No. PH9111

Group No. 05.06.1

Engine Control Module

Ref No.

Part Name

Part Number

Option No. PH9111

Req

Remarks

ENGINE CONTROL MODULE OPTION PH9111

MR - MODULE, ENGINE CONTROL Engine Control System: PE1, PE2, P1I, P2I ECM Version: CM850 PV Module Location (mm): N/A Ambient Air Pressure Sensor: Yes Intake Manifold Pressure Sensor: Absolute Oil Pressure Sensor: Sensor Speed Sensor Location: Cam Engine Design Phase: Pegasus Engine Family: C & L Series Engine Position Sensor: Crank

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 21 22 23 24

3609867 3682941 3900589 3900630 3900678 3901445 3913638 3920854 3944816 3977357 3955219 3955220 3957849 3970204 4076493 4088750 (4088751) 4921574 4903286 4903285 4903482 4921684 (4921685) 4928599 4921686 4928599 (4921687) 4921517 4921797

Dataplate Screw, Hexagon Head Cap Nut, Hexagon Flange Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Captive Washer Cap Screw, Hex Flange Head Cap Wire, Ground Isolator, Vibration Isolator, Vibration Screw, Socket Head Cap Cooler, Electronic Control Sensor, Pressure Sensor, Temperature Sensor, Temperature Seal, O Ring Sensor, Prs Temperature Sensor, Prs Temperature Seal, O Ring Sensor, Position Sensor, Position Seal, O Ring Sensor, Position Seal, O Ring Sensor, Position Sensor, Pressure Module, Electronic Control

1 1 1 1 2 4 1 1 3 1 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Page 91

M8 x 1.25 x 15 M8 x 1.25 M8 x 1.25 x 20 M8 x 1.25 x 40 M8 x 1.25 x 45 M6 x 1.00 x 16 M5 x 0.80 x 20 M8 x 1.25-6G

Ambient Air Pressure

Group No. 15.01

Ref No.

Part Number

Temperature Sensor

Part Name

Option No. PH9111

Req

Remarks

TEMPERATURE SENSOR OPTION PH9111

MR - SENSOR, TEMPERATURE Engine Control System: PE1, PE2,P1 I,P2 I ECM Vesion: CM850 PV Module Location (mm): N/A Ambient Air Pressure Sensor: Yes Intake Manifold Pressure Sensor: Absolute Oil Pressure Sensor: Sensor Speed Sensor Location: Cam Engine Design Phase: Pegasus Engine Family: C & L Series Engine Position Sensor: Crank

1 2

4088750 (4088751) (4921574)

Sensor, Temperature Sensor, Temperature Seal, O Ring

1 1 1

Page 92

Group No. 16.03

Ref No.

Part Number

Vibration Isolator

Part Name

Option No. PH9111

Req

Remarks

VIBRATION ISOLATOR OPTION PH9111

MR - ISOLATOR, VIBRATION Engine Design: Pegasus Engine Family: C & L Series

1 2 3

3955219 3955220 3957849

Isolator, Vibration Isolator, Vibration Screw, Socket Head Cap

4 4 1

Page 93

Group No. 01.04

Connecting Rod and Piston

Page 94

Option No. PP40422

Group No. 01.04 Ref No.

Part Number

Connecting Rod and Piston Part Name

Option No. PP40422

Req

Remarks

CONNECTING ROD AND PISTON OPTION PP40422

MR - PISTON, CONNECTING ROD AND Technical Model Name: 6LTAA8.9-C Engine Family: L Series CPL: 0422 Certified By: EPA, CARB, EU Cylinders: 6 Engine Aspiration: Charge Air Cooled Engine Control System: P2I Engine Application: Non-Road Engine Design Phase: Pegasus Service Model Name: QSL ECM Version: CM850 Centintel Provision: N/A Applicable FR Options: FR91709

2 3 1 4 5 6 7 8 9 10

3950661 3966244 4089963 3950549 3920692 (3966721) (4941393) 4089644 3979744 3944679 (3970392) 3970951

Bearing, Connecting Rod Bearing, Connecting Rod Piston, Engine Pin, Piston Ring, Retaining Skirt, Piston Top, Piston Set, Piston Ring Rod, Engine Connecting Screw, Connecting Rod Cap Rod, Engine Connecting Bushing

6 6 6 6 2 1 1 1 6 2 1 1

Page 95

Upper Sold In Higher Level Assy/Kit Sold In Higher Level Assy/Kit Sold In Higher Level Assy/Kit

Group No. 01.07

Ref No.

Part Number

Camshaft

Part Name

Option No. PP40422

Req

Remarks

CAMSHAFT OPTION PP40422

MR - CAMSHAFT Technical Model Name: 6CTAA8.9-C Engine Family: L Series CPL: 0422 Certified By: EPA, CARB, EU Cylinders: 6 Engine Aspiration: Charge Air Cooled Engine Control System: P2I Engine Application: Non-Road Engine Design Phase: Pegasus Service Model Name: QSL ECM Version: CM850 Centintel Provision: N/A Applicable FR Options: FR91709

1 2 3 4 5

3900227 3944001 3966430 (3972777) (3966431) 3950135

Screw, Hexagon Head Cap Support, Camshaft Thrust Camshaft Dowel, Pin Camshaft Gear, Camshaft

2 1 1 1 1 1

Page 96

M8 x 1.25 x 22

NOTES

Group No. 06.01

Fuel Injector

Page 98

Option No. PP40422

Group No. 06.01 Ref No.

Part Number

Fuel Injector Part Name

Option No. PP40422 Req

Remarks

FUEL INJECTOR OPTION PP40422

MR - INJECTOR, FUEL Technical Model Name: 6LTAA8.9-C Engine Family: L Series CPL: 0422 Certified By: EPA, CARB, EU Cylinders: 6 Engine Aspiration: Charge Air Cooled Engine Control System: P2I Engine Application: Non-Road Engine Design Phase: Pegasus Service Model Name: QSL ECM Version: CM850 Centintel Provision: N/A Applicable FR Options: FR91709

1 2 3

4939061 3959045 4017567

Injector Clamp, Injector Screw, Hex Flange Head Cap

6 6 12

Page 99

Group No. 01.04 Ref No.

Part Number

HEAD,CYLINDER Part Name

Option No. PP98939 Req

Remarks

HEAD,CYLINDER OPTION PP98939 3678923 (3678924) 3678925 3960043 3967059 3973632 3900250 3943888 3944452 3944711 3948578 (3969637) 3970727 3973631 3032693 3920706 3940152 3942645 3945093 3945094 3945097 3945098 3968074 3973630 4934063 3979599 3999907 4931931

Plug, Threaded Plug, Threaded Seal, O Ring Screw, Hex Flange Head Cap Gasket, Cylinder Head Head, Cylinder Collet, Valve Seal, Valve Stem Retainer, Valve Spring Spring, Valve Seal, Valve Stem Valve, Exhaust Valve, Intake Head, Cylinder Plug, Expansion Plug, Expansion Insert, Valve Guide, Valve Stem Plug, Expansion Plug, Expansion Plug, Expansion Plug, Expansion Insert, Valve Head, Cylinder Guide, Valve Stem Rotator, Valve Spring, Valve Spring, Valve

1 1 1 26 1 1 48 12 12 12 12 12 12 1 2 18 12 24 1 2 1 6 12 1 24 12 12 12

Page 100

M10 x 1.00 x 9.5 M10 x 1.00 x 9.5 M10 x 1.00 M14 x 2.00 x 160

Intake Exhaust Sold In Higher Level Assy/Kit Sold In Higher Level Assy/Kit Not Used On Engines W/Turbos

Group No. 10.06 Ref No.

Part Number

TURBOCHARGER Part Name

Option No. PP98978 Req

Remarks

TURBOCHARGER OPTION PP98978 3818823 3818824 3901356 4041946 4041943 3503100 3503533 3504967 3519163 3519302 3522597 3527566 3527619 3528104 3528121 3528177 3528221 3528933 3530923 3530924 3531238 3532195 3532196 3532217 3532427 3533163 3533328 3534291 3535215 3537960 3537979 3538468 3539209 3539743 3527089 3528179

Stud Nut, Hexagon Flange Gasket, Turbocharger Turbocharger Turbocharger Bearing, Turbocharger Screw, Hexagon Head Set Washer, Plain Screw, Drive Shield, Turbocharger Heat Pin, Roll Ring, Retaining Dataplate Baffle, Oil Coupling, Elbow Hose End, Adjusting Link Ring, Retaining Seal, O Ring Plate, Oil Seal Slinger, Oil Ring, Retaining Spacer, Mounting Spacer, Mounting Collar, Thrust Baffle, Turbocharger Noise Ring, Retaining Bracket, Actuator Screw, Hexagon Head Set Clamp, Hose Gasket, Adapter Connection, Adapter Hose, Plain Screw, Hexagon Head Set Housing, Turbine Shim Lever, Control Linkage

4 4 1 1 1 2 5 3 2 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 2 2 1 1 1 1 1 1 1

3529675 3529676

Bushing Valve, Wastegate

1 1

3537974 3592050 3595651 3596226 4036082 3596402 3597308 3598484 3592741 3597286 3597436

Housing, Turbine Nut, Hexagon Flange Bearing, Tur Thrust Shaft & Wheel Shaft, Turbocharger Nut, Lock Plate, Clamping Actuator, Turbocharger Seal, Dust Spring, Compression Piston, Tur Actuator

1 2 1 1 1 1 2 1 1 1 1

Page 101

M10 x 1.50 Holset P/N 3709861

M8 x 1.25 x 20

5 3527092 Lever, Control Linkage 1 5 3528178 Pin, Pivot 1 5 3527094 Valve, Wastegate 1 5 3527131 Washer, Plain 1 5 3529677 Lever, Wastegate Valve 1 6 3527095 Lever, Wastegate Valve 1 6 3529678 Shaft, Pivot 1

5 3590800 Piston, Tur Actuator 1 5 3591645 Diaphragm 1

Group No. 10.06 Ref No.

Part Number

3598282 3598284 3598285 3756754 3758848 3759917 3762259 4035380 4038197 4039620

TURBOCHARGER Part Name

Option No. PP98978 Req

Remarks

5 3592742 Guide, Actuator Shaft 1 5 3594839 Washer, Plain 2 5 3597288 Shaft, Actuator 1 Housing, Actuator 1 Cover, Actuator 1 5 3527437 Coupling, Plain Hose 1 5 3590498 Cover, Actuator 1 Plate, Clamping 1 Seal, Split Ring 1 Seal, Split Ring 1 Screw, Hexagon Head Set 6 M8 x 1.25 x 12 Ring, Retaining 4 Impeller, Tur Compressor 1 Housing, Tur Bearing 1 Housing, Compressor 1

Page 102

NOTES

Group No. 06.01.2

Injector Plumbing

Page 104

Option No. PP99120

Group No. 06.01.2 Ref No.

Part Number

Injector Plumbing Part Name

Option No. PP99120 Req

Remarks

INJECTOR PLUMBING OPTION PP99120

MR - PLUMBING, INJECTOR Engine Family: C & L Series Engine Design Phase: Pegasus Contains Bosch High Pressure Commonrail, Fuel Supply Tubes from Pump to Rail and Tubes from Rail to Injectors Also Contains Tube Brace for Three Fuel Supply Tubes for On-Engine Secondary Fuel Filter Options This Option is Identical to Option PP98356 With the Addition of the Bracket Assembly 4937500

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

3904446 3946625 3957413 3963815 3964141 3964142 3964143 (3964144) 3966853 3975042 4903290 4062328 (4903254) (4076624) (4088576) (4903218) 4937500

Screw, Hex Flange Head Cap Retainer, Inj Ful Sup Cnr Decal Manifold, Fuel Tube, Injector Fuel Supply Tube, Injector Fuel Supply Tube, Injector Fuel Supply Tube, Injector Fuel Supply Brace, Tube Tube, Injector Fuel Supply Connector, Injector Fuel Seal, O Ring Connector, Inj Fuel Supply Dowel, Pin Connector, Inj Fuel Supply Filter, Fuel Brace, Tube

3 6 2 1 1 3 1 1 1 1 6 1 1 1 1 1 1

Page 105

M10 x 1.50 x 70

Sold In Higher Level Assy/Kit

Group No. 03.01

Rocker Lever

Page 106

Option No. RL9753

Group No. 03.01 Ref No.

Part Number

Rocker Lever Part Name

Option No. RL9753 Req

Remarks

ROCKER LEVER OPTION RL9753

MR - LEVER, ROCKER Engine Family: C & L Series Engine Design Phase: Pegasus Beta Engine Brake Compatible: No High Pressure Common Rail (HPCR) Capable: Yes Fuel Pump Manufacturing/Model: Cummins CAPS II

1 2 3 4 5 6 7 8 9 10 5 10 6 8 9 11 12 13 14 15

3901447 3943445 (3972540) 3941140 3943933 3964713 (3935945) (3964714) 203131 (3941937) 3964720 (3964721) (3964722) 3964796 (3935945) (3964722) (3964797) 203131 3964720 (3964721) (3941934) 3966658 3964715 3966708 3967265

Screw, Hex Flange Head Cap Crosshead, Valve Assy, Rocker Lever Support, Rocker Lever Screw, Hex Flange Head Cap Lever, Rocker Retainer, Socket Lever, Rocker Nut, Heavy Hexagon Lever, Rocker Screw, Rkr Lever Adjusting Ball, Rocker Lever Socket, Rocker Lever Lever, Rocker Retainer, Socket Socket, Rocker Lever Lever, Rocker Nut, Heavy Hexagon Screw, Rkr Lever Adjusting Ball, Rocker Lever Lever, Rocker Shaft, Rocker Lever Rod, Push Gasket, Rkr Lever Housing Housing, Rocker Lever

7 12 6 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 12 1 1

Page 107

M8 x 1.25 x 75

3/8 - 24 UNF

3/8 - 24 UNF

Group No. 08.13.1

Ref No.

Radiator Plumbing Connection

Part Number

Part Name

Req

Option No. RP9043

Remarks

RAD PLUMBING CONNECTION OPTION RP9043

MR - CONNECTION, RAD PLUMBING Vent Provision Type: Customer Supplied Engine Interface: 1/4 in. NPTF Centerline of Engine to OEM Interface (mm): -79 Centerline of Crank to OEM Interface (mm): 479 Front Face of Block to OEM Interface (mm): -18 Unique Characteristic: Plug Only

1

4933317

Plug, Pipe

1

Page 108

Group No. 13.05.1 Ref No.

Part Number

MOUNTING,STARTING MOTOR Part Name

Req

Option No. SM9054 Remarks

MOUNTING,STARTING MOTOR OPTION SM9054

Mr - starter motor mounting thread size: M12 Item Supplied: Gasket Not Included spacer thickness (mm): 7.35mm spacer mounting flange SAE type: SAE#3 - 3 bolt 120 spacer included: Yes spacer male pilot diameter(mm): 106 spacer female pilot diameter (mm): 92.05 mounting hardwae supplied: 3 capscrews mounting hardware supplier: Cummins.

3965060 3968466

Spacer, Starting Motor Screw, Twelve Point Cap

1 3

Page 109

M12 x 1.75 x 50

Group No. 13.05

Ref No.

Starting Motor

Part Number

Part Name

Option No. ST9256

Req

Remarks

STARTING MOTOR OPTION ST9256 Pinion diametral pitch: 8/10 Pinion gear outside diameter (mm): 40.5 pinion gear Pinion gear offset (mm): 3.11 Pinion drive style: Offset Mounting flange type: 3 x 120 Frame size diameter (mm): 130 Pilot diameter (mm): 92.05 Starting Motor Length (mm): 244 Starter motor engine mounted angle (deg): 56 (+/- 15) Supply method: Mounted Cranking torque: TBD Removal length (mm): 41 Manufacturer: Denso Model: R7.5 Voltage: 24 Kilowatt Rating: 7.5 Nameplate brand: Cummins Unique Characteristics: Jump start protection grounding stud.

1

3957597

Motor, Starting

1

Page 110

Group No. 99.01 Ref No.

Part Number

ARRANGEMENT,TURBOCHARGER Part Name

Req

Option No. TB91058 Remarks

ARRANGEMENT,TURBOCHARGER OPTION TB91058

Mr - turbocharger arrangement Engine Family: C,L Series engine design phase: Pegasus industrial Cylinders: 6 Exhaust Outlet Location: HMRO from engine centerline (mm): -197.3 from crank centerline (mm): 568.5 from front face of block (mm): 559 Aspiration: Charge Air Cooled Exhaust Outlet Flange Tpe: Half Marmon Manifold Type: Dry Turbocharger Type: Wastegate Drain Location: Mid Block Provision on engine compressor outlet orientation from horizontal (deg) : 162 degree (18 degree up) and out Turbocharger ID17 P/N: 4039030, 4039139 studs in manifold: No.

Page 111

Group No. 10.06.1

EXHAUST MANIFOLD

Page 112

Option No. TB9849

Group No. 10.06.1 Ref No.

Part Number

EXHAUST MANIFOLD Part Name

Req

Option No. TB9849 Remarks

EXHAUST MANIFOLD OPTION TB9849

MR - EXHAUST MANIFOLD Engine Family: C Series Engine Design Phase: Pegasus Cylinders: 6 Exhaust Outlet Location: HMRO/HMFO From Engine Centerline (mm): -197.3/-330.8 From Crank Centerline (mm): 568.5/568.5 From Front Face of Block (mm): -559/-362 Aspiration: Charge Air Cooled Exhaust Manifold Turbo Mounting Flange Location: Exhaust Manifold Mounting Flange to Turbo Mounting Flange Centerline (mm): -140.5 Centerline of Exhaust Manifold Ports to Turbo Mounting Flange Centerline (mm): 52 From Center of #6 Exhaust Port to Turbo Mounting Flange Centerline (mm): 342.5 Manifold Type: Dry Manifold Style: 2 Piece Turbo Mounting Flange Geometry: 44.5 x 86 Turbo Mounting Flange Style: Rectangular Turbo Flange Thread: 4 x M10 x 1.5 Turbo Flange Angle from Vertical (deg): 90 Up Customer Mounting Bosses Quantity: 3

1 2 3 4 5

3945252 3944593 3937479 3968362 3937478

Spacer, Mounting Screw, Hex Flange Head Cap Gasket, Exhaust Manifold Manifold, Exhaust Manifold, Exhaust

12 12 6 1 1

Page 113

M10 x 1.50 x 65

Group No. 08.09

Ref No.

Torque Converter Oil Cooler

Part Number

Part Name

Req

Option No. TK9022

Remarks

TORQUE CONVERTER OIL COOLE OPTION TK9022

MR - TORQUE CONVERTER OIL COOLER For Use When No External Bypass is Required for Torque Converter Cooler

1 2

3089238 (3089239) 3089240

Plug, Threaded Plug, Threaded Seal, O Ring

2 1 1

Page 114

M22 x 1.50 x 15.5 M22 x 1.50 M22 x 1.50 x 15.5

NOTES

Group No. 10.06.2

TURBOCHARGER PLUMBING

Page 116

Option No. TP97218

Group No. 10.06.2 Ref No.

Part Number

TURBOCHARGER PLUMBING Part Name

Req

Option No. TP97218 Remarks

TURBOCHARGER PLUMBING OPTION TP97218

MR - TURBOCHARGER PLUMBING Design Phase: Pegasus Engine Family: C Series Cylinders: 6 Exhaust Outlet Location: HMRO From Engine Centerline (mm): -197.3 From Crank Centerline (mm): 568.5 From Front Face of Block (mm): -559 Supply Line Routing: N/A Drain Location: Mid-Block Provision From Engine Centerline (mm): -118.2 From Crank Centerline (mm): 112.3 From Front Face of Block (mm): -443.5 Turbocharger Type: HY40W VG Acutation Line: N/A Drain Line Type: Rigid Bearing Housing Cooling Provision: N/A

1 2 3 4 5 6 7 8 9 10 11 12 13 14

3965818 3093956 3282159 3412320 3900630 3286499

Clamp, Tube Screw, Hex Flange Head Cap Hose, Flexible Clamp, Hose Screw, Hex Flange Head Cap Hose, Plain

1 1 1 2 2 1

3922789 3678603 (3922790) 3922794 3931824 3937706 3945108 3943819

Connector, Male Seal, O Ring Connector, Male Seal, O Ring Seal, O Ring Gasket, Oil Drain Connection, Tur Oil Drain Tube, Tur Oil Drain

2 1 1 1 1 1 1 1

M8 x 1.25 x 12 M8 x 1.25 x 20 Not Used In This Option

Page 117

M12 x 1.50 x 11/16-16 Holset P/N 3519807

Group No. 99.01 Ref No.

Part Number

ARRANGEMENT,VALVE COVER Part Name

Req

Option No. VC9156 Remarks

ARRANGEMENT,VALVE COVER OPTION VC9156

Mr - valve cover Engine Family: C And ″L″ Series engine design phase: Pegasus alpha Cylinders: 6 Fill Location: Front Integral Breather: Yes color: Base engine logo: Cummins.

Page 118

NOTES

Group No. 03.01.1

Valve Cover

Page 120

Option No. VC9773

Group No. 03.01.1 Ref No.

Part Number

Valve Cover Part Name

Option No. VC9773 Req

Remarks

VALVE COVER OPTION VC9773

MR - COVER, VALVE Engine Family: C & L Series Engine Design Phase: Pegasus Alpha Oil Fill Provisions: Yes Oil Fill Location: Front Centerline of Crank to Centerline of Filler (mm): TBD Centerline of Engine to Centerline of Filler (mm): -25 Front Face of Block to Centerline of Filler (mm): -80 Noise Supression Provision: Yes Valve Cover Color: Base Engine Isolated Gasket System: Yes Integrated Breather: Yes Engine Compression Brake Compatible: No Logo: Cummins

1 2 3 4 5 6 7 8 9

3900632 3959799 3967770 3959798 3968202 (3968283) 3990084 3970865 3931532 (3967462) (3967524) 3999620

Screw, Hex Flange Head Cap Isolator, Vibration Cover, Valve Gasket, Valve Cover Cap.Filler Cap, Filler Seal, O Ring Cover, Valve Screw, Self Tapping Metal Cover, Valve Baffle, Breather Screw, Hex Flange Head Cap

7 8 1 1 1 1 1 3 1 1 1

Page 121

M8 x 1.25 x 35

Group No. 08.08

Corrosion Resistor

Page 122

Option No. WF9077

Group No. 08.08 Ref No.

Part Number

Corrosion Resistor Part Name

Option No. WF9077

Req

Remarks

CORROSION RESISTOR OPTION WF9077 Element Type: Spin-On Inhibitor Type: 12 Units DCA4+ Filter dimensions (mm): 93.7 OD x 137.5 length Removal distance (mm): 13.0 Filter Mounting Location: Supplied In Kit Centerline of engine to centerline of filter (mm): N/A Centerline of crank to top of filter (mm): N/A Front face of block to engine to centerline of filter (mm): N/A Decal included: No Unique Characteristics: Includes filter head, mounting bracket and 2 shut- off valves for customer mounting.

1 2

179901 204163

Valve, Shutoff Head, Corrosion Resistor

2 1

3 4 5 6

3008469 3010596 3100307 3920552

Plug, Pipe Screw, Captive Washer Cap Resistor, Corrosion Bracket, Filter

4 4 1 1

Page 123

Buy Directly from Fleetguard Purchase directly from Fleetguard.

3/4 NPT 3/8 - 16 x 1 1/4 in.

Buy Directly from Fleetguard

Group No. 08.07.1

Water Inlet Connection

Ref No.

Part Name

Part Number

Req

Option No. WI9145 Remarks

WATER INLET CONNECTION OPTION WI9145

3900630 3944720 3945603

Mr - water inlet connection

Screw, Hex Flange Head Cap Connection, Water Inlet Gasket, Connection

2 1 1

Page 124

Connection Outside Diameter (mm): 57.15 Connection Type: Beaded Connection Location: Horizontal Out from crank centerline: TBD from engine centerline: TBD from front face of block: TBD Engine Family: ″C″ Series.

M8 x 1.25 x 20

Group No. 08.07.1

Ref No.

Part Number

WATER OUTLET CONNECTION

Part Name

Req

Option No. WO9052

Remarks

WATER OUTLET CONNECTION OPTION WO9052

MR - CONNECTION, WATER OUTLET Connection Orientation: Pointing Up Connection Location: From Crank Centerline to Top of Connection (mm): 476.0 From Engine Centerline to Centerline of Connection (mm): 144.5 From Front Face of Block to Centerline of Connection (mm): 53.5 Connection Outside Diameter (mm): 57.2 Connection Length (mm): 144.0 Engine Family: C Series

1 2

3900631 3944429

Screw, Hex Flange Head Cap Connection, Water Outlet

2 1

Page 125

M8 x 1.25 x 25

Group No. 08.01

Ref No.

Part Number

Water Pump

Part Name

Option No. WP9101

Req

Remarks

WATER PUMP OPTION WP9101

MR - PUMP, WATER Pulley Material: Hardened (55 Rockwell) Pulley Type: Smooth Drive Ratio: 1.80:1 Pulley Diameter (mm): 110.0 Required Damper Pulley Effective Diameter Over 2.5mm Balls (mm): 199.42 Engine Design Phase: Pegasus, Tier 2 Engine Family: C & L Series Unique Characteristics: Saturated Nitrile Bellows

1 2 3

4089647 (3973114) 3940386 3093730

Kit, Water Pump Pump, Water Seal, O Ring Screw, Hex Flange Head Cap

1 1 1 3

Page 126

Recon Equivalent 4089647 NX Sold In Higher Level Assy/Kit M8 x 1.25 x 25

Group No. 08.01

Ref No.

Water Pump Drive

Part Number

Part Name

Option No. WP9165

Req

Remarks

WATER PUMP DRIVE OPTION WP9165

MR - BELT, FAN DRIVE Belt Length (mm): 2165.0 Material: Orion

1

3972376

Belt, V Ribbed

1

Page 127

Group No. 09.03

Ref No.

Part Number

Belt Tensioner

Part Name

Option No. WP9270

Req

Remarks

BELT TENSIONER OPTION WP9270

MR - TENSIONER, BELT Engine Family: C & L Series Pulley Groove Profile: Poly V 8 Rib K Tensioner Pulley Diameter Over 2.5mm Balls (mm): 73.95 Pulley Material: Ductile Iron Dust Shield Included: Integrated Into Tensioner

1 2

3282433 3974102

Screw, Hex Flange Head Cap Tensioner, Belt

1 1

Page 128

M10 x 1.50 x 85

NOTES

Group No. 05.06.1

External Control Module

Page 130

Option No. WR9230

Group No. 05.06.1

External Control Module

Ref No.

Part Name

Part Number

Option No. WR9230

Req

Remarks

EXTERNAL CONTROL MODULE OPTION WR9230

MR - HARNESS, ETR CTN MODULE WIRING Engine Design Phase: Pegasus Industrial Beta Turbocharger Type: WG Turbocharger Location: All Coolant Temp Jumper Length (mm): TBD OEM Connector Location: ECM OEM Connector Type: 50 Pin and 4 Pin Voltage: 12 or 24 Engine Family: C Series ECM Type: CM850

1 2 3 4 5 6 7 8 9 10 11 12 13 14

68152 3089384 3093956 3900625 3900626 3906216 3913638 3919294 3925381 3925883 3963736 3975901 3976494 3976940

Clip Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Nut, Hexagon Flange Screw, Hex Flange Head Cap Brace, Tube Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Clip, Wire Retaining Brace, Wiring Harness, Etr Cnt Mdl Wrg Harness, Etr Cnt Mdl Wrg

1 2 1 1 1 3 1 1 1 1 8 1 1 1

Page 131

M8 x 1.25 x 12 M6 x 1.00 x 10 M6 x 1.00 x 12 M6 x 1.00 M6 x 1.00 x 16 M8 x 1.25 x 16

Group No. 11.01.1

Exhaust Outlet Connection

Ref No.

Part Name

Part Number

Req

Option No. XS9321

Remarks

EXHAUST OUTLET CONNECTION OPTION XS9321

MR - EXHAUST OUTLET CONNECTION Engine Cylinders: 6 Exhaust Pipe Diameter: 4 in.

Connection Angle: 90 Degree Connection Material : Ductible Iron Note: May Be Used With Catalytic Converter Location: All

1 2

3905216 3927862

Clamp, V Band Pipe, Exhaust Outlet

1 1

Page 132

Option Index Option No. Description Page No. AH9155 . . . . . . . . . . . . . . . . . . . . . . . . . . Air Heater Starting Aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 AP9455 . . . . . . . . . . . . . . . . . . . . . . . . . . Agency Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 BB9081 . . . . . . . . . . . . . . . . . . . . . . . . . . Crankshaft Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 . . . . . . . . . . . . . . . . . . . . . . . . . Cylinder Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 . . . . . . . . . . . . . . . . . . . . . . . . . Cylinder Liner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 . . . . . . . . . . . . . . . . . . . . . . . . . Piston Cooling Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 . . . . . . . . . . . . . . . . . . . . . . . . . Valve Tappet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 BB9127 . . . . . . . . . . . . . . . . . . . . . . . . . . CYLINDER BLK COOLANT PLUMB . . . . . . . . . . . . . . . . . . 15 BB9836 . . . . . . . . . . . . . . . . . . . . . . . . . . Front Gear Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 BR9215 . . . . . . . . . . . . . . . . . . . . . . . . . . CRANKCASE BREATHER . . . . . . . . . . . . . . . . . . . . . . . . . . 19 CF9073 . . . . . . . . . . . . . . . . . . . . . . . . . . Refrigerant Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 CH9066 . . . . . . . . . . . . . . . . . . . . . . . . . . Coolant Heater Starting Ai . . . . . . . . . . . . . . . . . . . . . . . . . . 22 CH9087 . . . . . . . . . . . . . . . . . . . . . . . . . . Coolant Heater Starting Ai . . . . . . . . . . . . . . . . . . . . . . . . . . 23 DA9153 . . . . . . . . . . . . . . . . . . . . . . . . . . VIBRATION DAMPER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 DF9706 . . . . . . . . . . . . . . . . . . . . . . . . . . Frnt Gear Train Accy Drive . . . . . . . . . . . . . . . . . . . . . . . . . 25 DO90269 . . . . . . . . . . . . . . . . . . . . . . . . . SOFTWARE,CUS INTERFACE . . . . . . . . . . . . . . . . . . . . . . 26 EC9702 . . . . . . . . . . . . . . . . . . . . . . . . . . Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 EH97402 . . . . . . . . . . . . . . . . . . . . . . . . . Alternator Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 EM9253 . . . . . . . . . . . . . . . . . . . . . . . . . . Front Engine Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 FA9313 . . . . . . . . . . . . . . . . . . . . . . . . . . Fan Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 FA9735 . . . . . . . . . . . . . . . . . . . . . . . . . . Fan Drive Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 FF9425 . . . . . . . . . . . . . . . . . . . . . . . . . . Fuel Filter Plumbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 FF9587 . . . . . . . . . . . . . . . . . . . . . . . . . . Fuel Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 FH9356 . . . . . . . . . . . . . . . . . . . . . . . . . . Flywheel Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 FI9020 . . . . . . . . . . . . . . . . . . . . . . . . . . . Fuel Inlet Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 FP90238 . . . . . . . . . . . . . . . . . . . . . . . . . FUEL PUMP MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . 45 FP90239 . . . . . . . . . . . . . . . . . . . . . . . . . FUEL PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 FR91709 . . . . . . . . . . . . . . . . . . . . . . . . . RATING,FUEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 FS9746 . . . . . . . . . . . . . . . . . . . . . . . . . . Fuel Transfer Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 FT9028 . . . . . . . . . . . . . . . . . . . . . . . . . . Fuel Plumbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 FW9520 . . . . . . . . . . . . . . . . . . . . . . . . . . FLYWHEEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 FW9704 . . . . . . . . . . . . . . . . . . . . . . . . . . Flywheel Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 GG9804 . . . . . . . . . . . . . . . . . . . . . . . . . . Gear Cover Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 GG9829 . . . . . . . . . . . . . . . . . . . . . . . . . . Front Gear Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 HC9046 . . . . . . . . . . . . . . . . . . . . . . . . . . Cabin Heater Plumbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 IC9360. . . . . . . . . . . . . . . . . . . . . . . . . . . Air Intake Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 IC9426. . . . . . . . . . . . . . . . . . . . . . . . . . . AIR INTAKE CONNECTION MTG . . . . . . . . . . . . . . . . . . . . 64 IM9077. . . . . . . . . . . . . . . . . . . . . . . . . . . Air Intake Manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 IT9043 . . . . . . . . . . . . . . . . . . . . . . . . . . . Air Transfer Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 LA9121 . . . . . . . . . . . . . . . . . . . . . . . . . . Lifting Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 LA9151 . . . . . . . . . . . . . . . . . . . . . . . . . . Lifting Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 LC9765 . . . . . . . . . . . . . . . . . . . . . . . . . . Engine Oil Cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 LF9165 . . . . . . . . . . . . . . . . . . . . . . . . . . Lubricating Oil Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 LG9968 . . . . . . . . . . . . . . . . . . . . . . . . . . Oil Level Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 LO9701 . . . . . . . . . . . . . . . . . . . . . . . . . . LUBE OIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 LP9724 . . . . . . . . . . . . . . . . . . . . . . . . . . Lube Oil Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 OB9341 . . . . . . . . . . . . . . . . . . . . . . . . . . Oil Filler Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 OB9363 . . . . . . . . . . . . . . . . . . . . . . . . . . Cylinder Block Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 OP9338 . . . . . . . . . . . . . . . . . . . . . . . . . . Oil Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 PA9001 . . . . . . . . . . . . . . . . . . . . . . . . . . ACCESSORY DRIVE PULLEY . . . . . . . . . . . . . . . . . . . . . . 84 PH9055 . . . . . . . . . . . . . . . . . . . . . . . . . . Eng Cnt Module Plumbing . . . . . . . . . . . . . . . . . . . . . . . . . 87 . . . . . . . . . . . . . . . . . . . . . . . . . Engine Control Module Plum . . . . . . . . . . . . . . . . . . . . . . . . 85 PH9111 . . . . . . . . . . . . . . . . . . . . . . . . . . Dataplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 . . . . . . . . . . . . . . . . . . . . . . . . . . ELECTRONIC CONTROL COOLER . . . . . . . . . . . . . . . . . . 89 . . . . . . . . . . . . . . . . . . . . . . . . . . Engine Control Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Page A-1

Option No. Description Page No. . . . . . . . . . . . . . . . . . . . . . . . . . . Temperature Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 . . . . . . . . . . . . . . . . . . . . . . . . . . Vibration Isolator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 PP40422 . . . . . . . . . . . . . . . . . . . . . . . . . Camshaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 . . . . . . . . . . . . . . . . . . . . . . . . Connecting Rod and Piston . . . . . . . . . . . . . . . . . . . . . . . . . 95 . . . . . . . . . . . . . . . . . . . . . . . . Fuel Injector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 PP98939 . . . . . . . . . . . . . . . . . . . . . . . . . HEAD,CYLINDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 PP98978 . . . . . . . . . . . . . . . . . . . . . . . . . TURBOCHARGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 PP99120 . . . . . . . . . . . . . . . . . . . . . . . . . Injector Plumbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 RL9753 . . . . . . . . . . . . . . . . . . . . . . . . . . Rocker Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 RP9043 . . . . . . . . . . . . . . . . . . . . . . . . . . Rad Plumbing Connection . . . . . . . . . . . . . . . . . . . . . . . . . 108 SM9054 . . . . . . . . . . . . . . . . . . . . . . . . . . MOUNTING,STARTING MOTOR . . . . . . . . . . . . . . . . . . . . . 109 ST9256 . . . . . . . . . . . . . . . . . . . . . . . . . . Starting Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 TB9849 . . . . . . . . . . . . . . . . . . . . . . . . . . EXHAUST MANIFOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 TB91058 . . . . . . . . . . . . . . . . . . . . . . . . . ARRANGEMENT,TURBOCHARGER . . . . . . . . . . . . . . . . . . 111 TK9022 . . . . . . . . . . . . . . . . . . . . . . . . . . Torque Converter Oil Coole . . . . . . . . . . . . . . . . . . . . . . . . . 114 TP97218 . . . . . . . . . . . . . . . . . . . . . . . . . TURBOCHARGER PLUMBING . . . . . . . . . . . . . . . . . . . . . . 117 VC9156 . . . . . . . . . . . . . . . . . . . . . . . . . . ARRANGEMENT,VALVE COVER . . . . . . . . . . . . . . . . . . . . . 118 VC9773 . . . . . . . . . . . . . . . . . . . . . . . . . . Valve Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 WF9077 . . . . . . . . . . . . . . . . . . . . . . . . . . Corrosion Resistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 WI9145 . . . . . . . . . . . . . . . . . . . . . . . . . . Water Inlet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 WO9052 . . . . . . . . . . . . . . . . . . . . . . . . . WATER OUTLET CONNECTION . . . . . . . . . . . . . . . . . . . . . 125 WP9101 . . . . . . . . . . . . . . . . . . . . . . . . . . Water Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 WP9165 . . . . . . . . . . . . . . . . . . . . . . . . . . Water Pump Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 WP9270 . . . . . . . . . . . . . . . . . . . . . . . . . . BELT TENSIONER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 WR9230. . . . . . . . . . . . . . . . . . . . . . . . . . External Control Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 XS9321 . . . . . . . . . . . . . . . . . . . . . . . . . . Exhaust Outlet Connection . . . . . . . . . . . . . . . . . . . . . . . . . 132

Page A-2

INDEX Part No.

Description

68152 118227 129866 143066 156075 179901 203131 204163 3004258 3008465 3008468 3008469

Clip Dowel, Ring Union, Male Plug, Expansion Plug, Expansion Valve, Shutoff Nut, Heavy Hexagon Head, Corrosion Resistor Plug, Expansion Plug, Pipe Plug, Pipe Plug, Pipe

3010596 3013786 3027728 3032693 3035960 3040817 3046201 3049010 3052061 3061832 3061833 3067979 3073966 3089016

Screw, Captive Washer Cap Plug, Pipe Spacer, Mounting Plug, Expansion Ring, Retaining Seal, O Ring Seal, O Ring Elbow, Male Union Screw, Hexagon Head Cap Union, Male Union, Male Clamp, V Band Seal, O Ring Screw, Hex Flange Head Cap Plug, Threaded Plug, Threaded Seal, O Ring Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Resistor, Corrosion Union, Male Seal, O Ring Hose, Flexible Screw, Hex Flange Head Cap Dataplate Hose, Plain Housing, Flywheel Cover, Rear Elbow, Male Adapter Clamp, Hose Bearing, Turbocharger Screw, Hexagon Head Set Washer, Plain Screw, Drive Shield, Turbocharger Heat Pin, Roll Shim Ring, Retaining Dataplate Baffle, Oil Coupling, Elbow Hose End, Adjusting Link Lever, Control Linkage Ring, Retaining Seal, O Ring Bushing

3089238 3089239 3089240 3089384 3093730 3093826 3093956 3100307 3100516 3201562 3282159 3282433 3284906 3286499 3352392 3357700 3393258 3412320 3503100 3503533 3504967 3519163 3519302 3522597 3527089 3527566 3527619 3528104 3528121 3528177 3528179 3528221 3528933 3529675

Page No.

Part No.

Description

Page No.

131 71 42 7 60 123 107 123 7 66 7, 25, 60, 71 15, 22, 23, 25, 71, 123 123 73, 81 73 100 33 42 53 73 29 53 53 63 19

3529676 3530923 3530924 3531238 3532195 3532196 3532217 3532427 3533163 3533328 3534291 3535215 3537960 3537974 3537979 3538468 3539209 3539743 3592050 3592741 3595651 3596226 3596402 3597286 3597308 3597436 3598282 3598284 3598285 3598484 3609867 3629452 3678603 3678912 3678921 3678922 3678923 3678924 3678925 3682177 3682675 3682941 3756754 3758848 3759917 3762259 3800328 3818823 3818824 3864213 3883284 3883977 3899283 3899624 3899625 3899728 3900225 3900227 3900250 3900257 3900269 3900589 3900625

Valve, Wastegate Plate, Oil Seal Slinger, Oil Ring, Retaining Spacer, Mounting Spacer, Mounting Collar, Thrust Baffle, Turbocharger Noise Ring, Retaining Bracket, Actuator Screw, Hexagon Head Set Clamp, Hose Gasket, Adapter Housing, Turbine Connection, Adapter Hose, Plain Screw, Hexagon Head Set Housing, Turbine Nut, Hexagon Flange Seal, Dust Bearing, Tur Thrust Shaft & Wheel Nut, Lock Spring, Compression Plate, Clamping Piston, Tur Actuator Housing, Actuator Cover, Actuator Plate, Clamping Actuator, Turbocharger Dataplate Clip Seal, O Ring Seal, O Ring Plug, Threaded Plug, Threaded Plug, Threaded Plug, Threaded Seal, O Ring Seal, O Ring Connection, Air Transfer Screw, Hexagon Head Cap Seal, Split Ring Seal, Split Ring Screw, Hexagon Head Set Ring, Retaining Kit, Liner Stud Nut, Hexagon Flange Bracket, Filter Seal, O Ring Pipe, Air Transfer Seal, O Ring Cover, Filter Head Adapter, Filter Head Seal, O Ring Screw, Hexagon Head Cap Screw, Hexagon Head Cap Collet, Valve Dowel, Pin Washer, Plain Nut, Hexagon Flange Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap

101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 102 102 102 101 88, 91 53 117 7 7 7 7, 39, 100 7, 39, 100 7, 39, 100 63 63 91 102 102 102 102 8 101 101 73 66 66 45, 73 73 73 73 41 96 100 7 56 19, 91

39, 53 114 114 114 131 126 29 117, 131 123 42 71 117 128 4 117 41 41 73 117 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101

3900626

Page B-1

131 131

INDEX Part No.

Description

3900628

Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Hexagon Head Cap Screw, Hex Flange Head Cap Plug, Expansion Screw, Hex Flange Head Cap Gasket, Turbocharger Screw, Hexagon Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Dowel, Pin Screw, Hex Flange Head Cap Plug, Expansion Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Gear, Flywheel Ring Washer, Sealing Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Nut, Hexagon Flange Screw, Banjo Connector Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Nut, Hexagon Flange Seal, Rectangular Ring Screw, Hex Flange Head Cap Plug, Threaded Screw, Hex Flange Head Cap Pin, Dowel Clamp, V Band Plug, Expansion Nut, Hexagon Flange Plug, Pipe Seal, Rectangular Ring Flywheel Flywheel Seal, Rectangular Ring Screw, Hexagon Head Cap Screw, Hex Flange Head Cap Screw, Drive Screw, Hex Flange Head Cap Plug, O Ring

3900630 3900631 3900632 3900634 3900677 3900678 3900956 3901249 3901356 3901395 3901445 3901447 3901846 3901865 3901969 3902112 3902114 3902116 3902127 3902425 3902451 3902460 3902662 3903035 3903105 3903112 3903210 3903475 3903990 3904181 3904446 3904483 3905216 3905401 3906216 3906619 3906696 3906808 3906809 3907177 3907769 3907860 3908612 3909025 3910248

Page No.

Part No.

Description

81

3910260 3910495

Seal, O Ring Screw, Hex Flange Head Cap Bearing, Ball Screw, Hex Flange Head Cap Washer, Plain Hub, Fan Seal, Rectangular Ring Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Plate, Clamping Tag, Instruction Screw, Hex Flange Head Cap Shield, Dust Gasket, Oil Cooler Core Gear, Crankshaft Brace, Tube Pulley, Accessory Drive Screw, Hex Flange Head Cap Bracket, Filter Ring, Retaining Plug, Expansion Washer, Sealing Screw, Captive Washer Cap Seal, Oil Seal, Oil Connector, Male Connector, Male Seal, O Ring Retainer, Fan Hub Plug, Threaded Plug, Threaded Connection, Oil Filler Screw, Banjo Connector Sleeve, Wear Shield, Dust Plate, Cover Kit, Seal Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Seal, Oil Sleeve, Wear Screw, Hex Flange Head Cap

91, 117, 124

3910739 3910901

125 121 21, 33 77

3910960 3911924 3912473 3913638 3914118

91 7 25, 67 101 56 91 107 7 19, 81 7 64 39, 65 45 55 81 30 73 21, 45 51, 53 29 29, 34 21, 29 78 53 41 45, 105 11 132 7 81, 131 71 79 55 55 7, 8 33 71, 83 4 7 41

3915490 3916103 3916518 3918113 3918174 3918776 3919294 3919624 3920447 3920552 3920692 3920706 3920773 3920854 3921927 3921928 3922789 3922790 3922794 3923044 3924147 3924148 3924595 3924725 3924986 3924987 3925234 3925343 3925344 3925381 3925530 3925532 3925883 3926048 3926126 3926722 3926846 3926855 3926863 3926865 3927611 3927862 3929011 3930910 3930911 3931084

Page B-2

Seal, O Ring Kit, Seal Seal, Rectangular Ring Screw, Hex Flange Head Cap Pulley, Fan Screw, Hex Flange Head Cap Spacer, Mounting Brace, Tube Pipe, Exhaust Outlet Gasket, Lub Oil Clr Cover Plug, Threaded Seal, O Ring Plug, Threaded

Page No. 41 79 33 29, 73 81 33 41 51, 81, 91, 131 24 34 76 21 59 71 11 131 84 41 123 95 79, 100 83 91 59 13 117 117 117 33 83 83 78 53 13 13 41 11 21 131 11 11 19, 37, 57, 59, 131 7 11 45 17 33 59 83 83 132 71 71 71 71

INDEX Part No.

Description

3931532 3931824 3933384 3934278 3934410 3935229 3935945 3936365 3937123 3937478 3937479 3937706 3938077 3939352 3939353 3940152 3940245 3940246 3940386 3941140 3941786 3941934 3941937 3942535 3942645 3942764 3942895 3942896 3943445 3943661 3943663 3943665 3943682

Screw, Self Tapping Metal Seal, O Ring Cover, Rear Valve, Bypass Valve, Bypass Shaft, Idler Retainer, Socket Valve, Pressure Relief Stud Manifold, Exhaust Gasket, Exhaust Manifold Gasket, Oil Drain Nut, Lock Gasket, Oil Suc Connection Gasket, Rear Cover Insert, Valve Gasket, Hydraulic Pump Plate, Cover Seal, O Ring Support, Rocker Lever Carrier, Seal Lever, Rocker Lever, Rocker Seal, Oil Guide, Valve Stem Gear, Fuel Pump Support, Fan Support, Fan Crosshead, Valve Pulley, Crankshaft Pulley, Crankshaft Adapter, Crankshaft Screw, Hex Flange Head Cap End, Adjusting Link Plug, Expansion Tube, Tur Oil Drain Screw, Hex Flange Head Cap Seal, Valve Stem Screw, Hex Flange Head Cap Support, Camshaft Thrust Bearing, Main Bearing, Main Bearing, Main Bearing, Main Bearing, Main Bearing, Main Bearing, Main Bearing, Main Bearing, Main Bearing, Main Bearing, Crankshaft Thrust Bearing, Crankshaft Thrust Bearing, Crankshaft Thrust Bearing, Crankshaft Thrust Bearing, Crankshaft Thrust Bearing, Crankshaft Thrust Bearing, Crankshaft Thrust Bearing, Crankshaft Thrust Gasket, Gear Housing Support, Alternator Connection, Water Outlet Retainer, Valve Spring Screw, Hex Flange Head Cap

3943793 3943808 3943819 3943885 3943888 3943933 3944001 3944153 3944154 3944155 3944156 3944157 3944158 3944159 3944160 3944161 3944162 3944163 3944164 3944165 3944166 3944167 3944168 3944169 3944170 3944293 3944405 3944429 3944452 3944593

Page No.

Part No.

Description

121 117 41 71 71 29 107 71 45 113 113 117 59 81 41 100 25 25 126 107 59 107 107 59 100 45 33 33 107 24 24 24

3944679 3944711 3944718 3944720 3944816

3963736 3963815 3963988 3963990

Screw, Connecting Rod Cap Spring, Valve Support, Ref Compressor Connection, Water Inlet Screw, Hex Flange Head Cap Screw, Hex Flange Head Cap Plug, Expansion Plug, Expansion Plug, Expansion Plug, Expansion Connection, Tur Oil Drain Link, Adjusting Spacer, Mounting Bushing Gasket, Connection Kit, PDC Kit, PDC Kit, PDC Kit, PDC Kit, PDC Plunger, Prs Regulator Retainer, Inj Ful Sup Cnr Liner, Cylinder Seal, Valve Stem Gear, Camshaft Housing, Gear Pin, Piston Bearing, Connecting Rod Bracket, Transfer Pump Isolator, Vibration Isolator, Vibration Isolator, Vibration Valve, Check Decal Motor, Starting Screw, Socket Head Cap Cover, Gear Clamp, Injector Bracket, Lifting Nozzle, Piston Cooling Adapter, Filter Head Gasket, Valve Cover Isolator, Vibration Screw, Hex Flange Head Cap Clip, Wire Retaining Manifold, Fuel Washer, Sealing Washer, Sealing

3964028 3964092 3964093 3964141 3964142 3964143 3964144 3964393 3964713 3964714 3964715 3964720 3964721 3964722 3964796

Connection, Oil Suction Housing, Breather Housing, Breather Tube, Injector Fuel Supply Tube, Injector Fuel Supply Tube, Injector Fuel Supply Tube, Injector Fuel Supply Connection, Oil Drain Lever, Rocker Lever, Rocker Rod, Push Screw, Rkr Lever Adjusting Ball, Rocker Lever Socket, Rocker Lever Lever, Rocker

64 21 75 117 17 100 107 96 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 13 13 13 17 29 125 100 113

3944874 3945093 3945094 3945097 3945098 3945108 3945206 3945252 3945329 3945603 3945917 3945918 3945919 3945920 3945921 3945967 3946625 3948095 3948578 3950135 3950375 3950549 3950661 3955110 3955114 3955219 3955220 3957290 3957413 3957597 3957849 3958112 3959045 3959113 3959291 3959613 3959798 3959799 3960043

Page B-3

Page No. 95 100 21 124 91 71 100 100 100 100 117 21 113 7 124 11 11 11 11 11 71 105 7, 8 100 96 17 95 95 51 51 91, 93 91, 93 53 105 110 91, 93 59 99 68 7, 9 39 121 121 100 131 105 51, 53 37, 47, 51, 53, 85, 87 83 19 19 105 105 105 105 79 107 107 107 107 107 107 107

INDEX Part No.

Description

3964797 3965011 3965012 3965060 3965146 3965155 3965818 3965966 3966035 3966128 3966129 3966130 3966244 3966286

Lever, Rocker Crankshaft, Engine Crankshaft, Engine Spacer, Starting Motor Pulley, Alternator Support, Filter Clamp, Tube Tappet, Valve Guide, Tappet Tube, Fuel Supply Tube, Fuel Supply Tube, Fuel Supply Bearing, Connecting Rod Screw, Hex Flange Head Cap Tube, Fuel Supply Tube, Fuel Supply Core, Cooler Camshaft Camshaft Connection, Fuel Block Shaft, Rocker Lever Gasket, Rkr Lever Housing Skirt, Piston Brace, Tube Brace, Tube Head, Lub Oil Filter Screw, Hex Flange Head Cap Damper, Vibration Gasket, Cylinder Head Housing, Rocker Lever Cover, Valve Baffle, Breather Cover, Valve Valve, Check Insert, Valve Pump, Fuel Transfer Pump, Fuel Transfer Cap.Filler Cap, Filler Manifold, Exhaust Connection, Air Intake Tube, Fuel Drain Tube, Fuel Drain Tube, Fuel Drain Tube, Oil Gauge Screw, Twelve Point Cap Valve, Exhaust Head, Fuel Filter Connection, Adapter Cooler, Electronic Control Rod, Engine Connecting Seal, Oil Spring, Compression Valve, Intake Screw, Hex Flange Head Cap Cover, Valve Shield, Dust Bushing Cap, Main Bearing Block, Cylinder Block, Cylinder Connection, Adapter Belt, V Ribbed Assy, Rocker Lever

3966317 3966320 3966365 3966430 3966431 3966656 3966658 3966708 3966721 3966851 3966853 3966885 3966976 3967014 3967059 3967265 3967462 3967524 3967770 3967782 3968074 3968189 3968190 3968202 3968283 3968362 3968371 3968424 3968426 3968427 3968447 3968466 3969637 3969680 3969822 3970204 3970392 3970548 3970655 3970727 3970810 3970865 3970946 3970951 3970955 3971390 3971391 3972088 3972376 3972540

Page No.

Part No.

Description

107 11 11 109 29 39 117 14 7 85, 87 85 37 95

3972681 3972686

Clamp, V Band Screw, Hex Flange Head Cap Dowel, Pin Decal Pump, Water Assembly, Fuel Pump Filter, Fuel Dipstick Dipstick Gasket, Oil Pan Head, Cylinder Head, Cylinder Head, Cylinder Element, Lub Oil Filter Tensioner, Belt Pan, Oil Cover, Lub Oil Cooler Head, Lub Oil Filter Tube, Lub Oil Drain Tube, Injector Fuel Supply Support, Idler Pulley Heater, Intake Air Gasket, Connection Brace, Wiring Filter, Fuel Harness, Etr Cnt Mdl Wrg Cover, Intake Manifold Brace, Alternator Harness, Etr Cnt Mdl Wrg Wire, Ground Plug, Threaded Pulley, Idler Dataplate Tube, Fuel Supply Support, Fuel Pump Tube, Fuel Supply Rotator, Valve Rod, Engine Connecting Seal, O Ring Pump, Lubricating Oil Screw, Hex Flange Head Cap Support, Front Engine Gasket, Connection Screw, Hex Flange Head Cap Spring, Valve Screw, Hex Flange Head Cap Impeller, Tur Compressor Shaft, Turbocharger Housing, Tur Bearing Housing, Compressor Turbocharger Turbocharger Seal, O Ring Head, Lub Oil Filter Hose, Flexible Hose, Flexible Sensor, Pressure Dowel, Pin Connector, Inj Fuel Supply Body, Fuel Pump Sensor, Temperature Sensor, Temperature Pump, Fuel

7 51 51 71 96 96 53 107 107 95 37 105 71 71 24 100 107 121 121 121 51 100 51 51 121 121 113 63 53 53 53 75 109 100 39 37, 47, 85, 87 89, 91 95 41 71 100 7 121 29 95 7 7 7 51 127 107

3972777 3972835 3973114 3973228 3973232 3973337 3973338 3973509 3973630 3973631 3973632 3973686 3974102 3974294 3974324 3974326 3974546 3975042 3975326 3975485 3975487 3975901 3976312 3976494 3976716 3976754 3976940 3977357 3977851 3978324 3978698 3979330 3979337 3979403 3979599 3979744 3990084 3991123 3991306 3991895 3992092 3999620 3999907 4017567 4035380 4036082 4038197 4039620 4041943 4041946 4062328 4063933 4063970 4063971 4076493 4076624 4088576 4088604 4088750 4088751 4088866

Page B-4

Page No. 66 39 96 39 126 47 39 75 75 83 100 100 100 73 128 83 71 71 19 105 29 3 3, 64 131 39 131 65 29 131 91 53 29 4 37 45 87 100 95 121 77 41 30 71 65, 121 100 99 102 101 102 102 101 101 105 73 73 73 91 105 105 47 91, 92 91, 92 47

INDEX Part No.

Description

4089644 4089647 4089963 4902732 4902780 4903218 4903254 4903285 4903286 4903290 4903482 4921431 4921432 4921436 4921517 4921574 4921574 4921684 4921685 4921686 4921687 4921797 4928599 4930594 4931931 4933317 4933532 4934063 4935680 4937500 4938740 4939061 4941393

Set, Piston Ring Kit, Water Pump Piston, Engine Head, Fuel Pump Gasket, Cover Plate Filter, Fuel Connector, Inj Fuel Supply Sensor, Prs Temperature Sensor, Prs Temperature Connector, Injector Fuel Seal, O Ring Pump, Fuel Adapter, Fuel Pump Gasket, Fuel Pump Sensor, Pressure Seal, O Ring Seal, O Ring Sensor, Position Sensor, Position Sensor, Position Sensor, Position Module, Electronic Control Seal, O Ring Thermostat Spring, Valve Plug, Pipe Plug, Pipe Guide, Valve Stem Bracket, Lifting Brace, Tube Tag, Instruction Injector Top, Piston

Page No.

Part No.

95 126 95 47 47 105 105 91 91 105 91 47 47 47 91 91 92 91 91 91 91 91 91 27 100 108 60 100 68 105 3 99 95

Page B-5

Description

Page No.

NOTES

A. II - QSL CONSTRUCTION

Customized Parts Catalog for Engine Model

QSL CONSTRUCTION

Prepared Specifically for:

ATLAS COPCO ST1030 MARK II Engine Serial Number: 46641008

Serial No. 46641008

!46641008!