Cub Cadet Tractors I1046 I1050 Master Parts Manual – PDF

i1046 & i1050/Series i1000

SECTION HM12

PARTS MANUAL

Zero Turn Riding Mower Models i1046 i1050

CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 PRINTED IN U.S.A.

769-02740 12/2006

i1046 & i1050/Series i1000

SECTION HM12

Frame, PTO & Battery

35

5

25

12

15

2 13 14

6

36

21

38

23

10

16

28

5

4

18 8

7 19

24

37

12

34

11

10

3 1

22

10

31

10

10

16 32

10 30

29 26

27

17

20 9

33

i1046 & i1050/Series i1000

SECTION HM12

Frame, PTO & Battery Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Part No. 683-04305 683-04333 683-04351 710-0451 710-0599 710-04666 710-0726 710-0642 710-04379A 710-1260A 710-3005 712-0271 712-3087 712-04063 712-04064 712-04065 717-04174A 725-04439 731-05659 736-0171

Description Frame Assembly Frame Assembly, Seat Bracket, Running Board Support Screw, Carriage, 5/16-18 x .75 Gr.1 Screw, Hex Wash. Hd. Tapp, 1/4-20 x .5 Screw, Hex Flange Hd. , 1/4-20 x .75 Gr5 Screw, Hex Wash. Hd. Tapp, 5/16-12 x .75 Screw, Hex Wash. Hd. Tapp, 1/4-20 x .75 Screw, Hex Cap Lock, 7/16-20 x 3.5 Gr5 Screw, Hex Wash. Hd. Tapp, 5/16-18 x .75 Screw, Hex Cap, 3/8-16 x 1.25 Gr5 Nut, Hex Sems, 1/4-20 Nut, Wing, 1/4-20 Nut, Hex Flange Insert Lock, 5/16-18 Nut, Hex Flange Insert Lock, 1/4-20 GrF Nut, Hex Flange Insert Lock, 3/8-16 GrF Clutch, Electric PTO Solenoid, Start Bushing, Steering Shaft Washer, Lock, 7/16

Ref. No. 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Part No. 736-0222 738-0143 738-1132 738-04058 747-04215 750-04763 756-0978B 783-1447C 783-04419B 783-04467 783-04806 783-04844 783-04845 783-4868 783-04910 925-1707D 725-04513 725-0157 725-04375A

Description Washer, External Lock, 1/4 Bolt, Shoulder, .496 x .336:3/8-16 Screw, Shoulder, .25 x .15:1/4-20 Screw, Shoulder, .38 x 1.0 x .7 Strap, Battery Spacer, 1.37 x 1.00 x .25 Pulley, Engine Bracket, Battery Support Bracket, Clutch Bracket, Deck Up Stop Bracket, Pivot Bar Bracket, Pivot Support RH Bracket, Pivot Support LH Bracket, Steering Support Bracket, Support Fender Battery - Dry Wire, Ground Jumper Cable Tie Harness, Main Wire

i1046 & i1050/Series i1000

SECTION HM12

Hood, Dash Panel & Fuel Tank 29

18

11

10

36

17

30 24

20 37

16

2 19

31

B

33 3 21

32

3

A

24

38

22

25

8 26

6

27

39

C 13

53

51

28

52

15

48

50 49

14

40

42 41

8 43

B

8

6

A

44

4

7

47

8 35

13

46 34

C

45

12 5

1 9

23

i1046 & i1050/Series i1000

SECTION HM12

Hood, Dash Panel & Fuel Tank Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Part No. 683-04219A 710-0192 710-0599 710-0604A 710-0607 710-0642 710-0726 710-0895 710-1611B 710-3217 712-0142 712-04065 725-0157 725-0963 725-01649 725-2003 725-2054 725-04022B 725-04258 725-04227 726-3046 731-04213 731-05368 731-05406 731-05434 731-05435 731-05525

Description Bumper Assembly Screw, Truss Hd. Mach., 10-24 x .375 Screw, Hex Wash Hd. Tapp, 1/4-20 x .5 Screw, Hex Wash Hd. Tapp, 5/16-18 x .625 Screw, Hex Wash Hd. Tapp, 5/16-18 x .5 Screw, Hex Wash Hd. Tapp, 1/4-20 x .75 Screw, Hex Wash Hd. Tapp, 5/16-12 x .75 Screw, Hex Wash Hd. Tapp, 1/4-15 x .75 Screw, Pan Hd. Tapp, 5/16-18 x .75 Screw, Truss Hd. Mach., #8-32 x .375 Nut, Hex, 8-32 Nut, Hex Flange Insert Lock, 3/8-16 GrF Tie, Cable Bulb, 12V Light Receptacle, Light Receptacle, 12V Power Key, Ignition Switch Meter, Indicator/Service Monitor Switch, PTO Switch, Ingition/Module Clip, Ratchet Lever, Dash Brake Cap, Bumper Panel, Dash Hood Plenum, Hood Lense, Head Light LH

Ref. No. 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

Part No. 731-05526 731-3161A 735-0271A 735-04075 735-04076 736-0463 738-01434 738-04091 746-1100 746-04120 747-1155 777X42426 777X42427 783-04285D 783-04323D 783-04506A 783-04606B 783-04840 783-04841 783-05162 651-04174 735-0149 735-04081 751-10441 751-10442 751-10447

Description Lense, Head Light RH Knob, Throttle Control Bumper Deflector, Rubber Hood Net, Storage Washer, Flat, .25 x .63 x .0515 Bolt, Shoulder, .496 x .336:3/8-16 Screw, Shoulder, .43 x .29:TT5/16-18 Cable, Throttle Control Cable, Choke Control Rod, Brake Lock Pivot Label, Reflector Label, Reflector Support, Dash, R.H. Support, Dash, L.H. Plate, Dash Support Bracket, Hood Pivot Bracket, Hood Pivot RH Bracket, Hood Pivot LH Bracket, Hood Support Tank Assembly, Fuel Bushing, Fuel Tank Grommet, Rubber Valve, Rollover Fitting, Fuel Pick Up Cap, Fuel Tank

i1046 & i1050/Series i1000

SECTION HM12

Seat, Fender & Deck Lift

C

46

D 21

34

5 52

12 51

32

4

38

12

23

25

13 12

24

49

6 9

C

54

53

20

55

30 8

56

57

54

6 49

B 29

14

35 12

12

A 41

43

18

36

45

43

42

15

26 42

37

27

15

47

16

13 13

B

2

44 50 19

10

48 17

40

40

7

9

A

11

3

22

31

13

12

39

D

28 1

i1046 & i1050/Series i1000

SECTION HM12

Seat, Fender & Deck Lift Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Part No. 17239D 647-04095 683-04313 710-04482 710-1260A 710-0451 710-0599 710-0726 710-0895 711-0332 711-04626 712-04063 712-04065 710-04187 714-0104 714-0111 714-04023 716-0106A 720-0311 726-3046 731-04074 731-05477 731-05518 732-04074 732-04386 732-04442 732-0826A 732-1184

Description Bracket, Seat Switch Shaft, Lift Seat Slide Screw, Hex Flange, 3/8-16 x .875 Gr5 Screw, Hex Wash Hd. Tapp, 5/16-18 x .75 Screw, Carriage, 5/16-18 x 75 Screw, Hex Wash Hd. Tapp, 1/4-20 x .5 Screw, Hex Wash Hd. Tapp, 5/16-12 x .75 Screw, Hex Wash Hd. Tapp, 1/4-15 x .75 Pin, Clevis, .5 x .78 Pin, Seat Index Nut, Hex Flange Insert Lock, 5/16-18 GrF Nut, Hex Flange Insert Lock, 3/8-16 GrF Screw, Hex Wash Hd. H/L, 1/4-15 x .5 Pin, Internal Cotter Pin, Cotter, 3/32 x 1.0 Pin, Internal Cotter E-ring, .625 Shaft Grip, Handle Clip, Ratchet Spacer, Seat Adjustment Cover, Rear Fender RH Cover, Rear Fender LH Spring, Compression Spring, Seat Adjust Spring, Lift Torsion Spring, Extension, .865 x 4.68 Spring, Extension, .84 x 4.6

Ref. No. 29 30 31 32 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

Part No. 735-04078 735-04079 726-0221 736-0272 736-0192 736-3078 738-0138A 738-0380 738-0966A 738-1011A 738-0296 741-0225 746-04369 746-0968 747-04613 756-1154 757-04053 783-0678B 783-0720C 783-04901 783-04977A 783-05307 783-05272 710-0227 726-0279 725-1303 725-1439 726-0278

Description Pad, Foot RH Pad, Foot LH Nut, Speed, .5 Washer, Flat, .51 x 1.0 x .06 Washer, Flat, .535 x .93 x .09 Washer, Flat, .344 x 1.0 x .063 HT Bolt, Shoulder, .496 x 2.5:3/8-16 Bolt, Shoulder, .5 x .27:3/8-16 Bolt, Shoulder, .5 x .925:3/8-16 Bolt, Shoulder, .5 x 2.23:3/8-16 Bolt, Shoulder, .447 x .268:5/16-18 Bearing, Hex Flange, Cable, Lift, 16.16 Lg Cable, Lift, 16.16 Lg Handle, Lift Pulley, Roller Seat, High Back Link, Deck Lift Bracket, Front Deck Adjust Fender, Rear Plate, Deck Lift Pedesta, Seat Plate, Seat Pivot Screw, Hex Wash Hd. Tapp, #8-18 x .5 Plate, Insulator Switch, Outer Seat Spring Switch, Inner Seat Spring Plate, Insulator Boss

i1046 & i1050/Series i1000

SECTION HM12

Steering Controls & Front Axle

48

57

56

15

60 32

13

2

14 65

72 71

24

7

47 30

69 33 70

72

70

23 7

26 51

30 9

63

11 37 51

33

62

46

25

11 1

36

34

6

64 55

37

39 38

10

19

28

8 66

50 25

6

55

49

19 62

27

18

35

44

31

20 40

41

35 44

68

43 67

28

5

53

3 39

39

16

22

17

21

73

17

59 40

16

61

54

52 42

58

29

45

12

35

4

i1046 & i1050/Series i1000

SECTION HM12

Steering Controls & Front Axle Ref. No. 1 2 3

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Part No. 618-04430 631-04008A 634-04165 734-1731 737-0224 941-04137 934-0255 647-04062 647-04063 647-04080A 710-0599 683-04282A 683-04284A 683-04332 710-0597 710-0195 710-0528 710-0642 710-0650 710-04187 710-3015 710-0520 710-3085 710-3119 710-3144 710-3296 710-04006 710-04389 710-1260A 711-04722 711-04472 711-04562 712-0312A 712-0365 712-0375 712-04063 712-04064 712-04065 712-3001

Description Steering Assembly, Steering/Hydro Wheel Assembly, Steering Wheel Assembly Tire, 15 x 6 x 6 Grease Fitting Bearing, Ball Valve, Tubeless Air Axle Assembly, LH Axle Assembly, RH Rod, Fender Support Screw, Hex Wash Hd. Tapp, 1/4-20 x .5 Arm, Steering, RH Arm, Steering, LH Link, Steering Box/Hydro Screw, Hex Cap, 1/4-20 x 1.0 Gr5 Screw, Hex Cap, 1/4-28 x .625 Gr5 Screw, Hex Cap, 5/16-18 x 1.25 Gr5 Screw, Hex Wash Hd. Tapp, 1/4-20 x .75 Screw, Hex Wash Hd. Tapp, 5/16-18 x .875 Screw, Hex Wash Hd. Hi/Lo, 1/4-15 x .5 Screw, Hex Cap, 1/4-20 x .75 Gr5 Screw, Hex Cap, 3/8-16 x 1.5 Gr5 Screw, Hex Cap, 3/8-16 x 3.5 Gr5 Screw, Hex Cap Lock, 3/8-16 x .75 Gr5 Screw, Hex Cap, 3/8-16 x 2.0 Gr5 Screw, Hex Cap Lock, 1/4-20 x .75 Gr5 Screw, Hex Wash Hd. Tapp, 5/16-18 x 2.0 Screw, Hex Wash Hd. Tapp, 5/16-18 x 2.25 Screw, Hex Wash Hd. Tapp, 5/16-18 x .75 Pin, Clevis, .375 x .969 HT Link, Drag Shaft, Steering Pivot Gear Nut, Jam, 3/8-24 LH Thrd Nut, Hex Lock, M8 x 1.25 Gr9 Nut, Hex Lock, 3/8-16 Nut, Hex Insert Flange Lock, 5/16-18 GrF Nut, Hex Insert Flange Lock, 1/4-20 GrF Nut, Hex Insert Flange Lock, 3/16-16 GrF Nut, Hex Jam, 3/8-24 Gr2

Ref. No. 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

Part No. 713-04037 714-0104 736-0286 714-04039 717-04274 717-04275 717-04282 719-04170 723-04035 723-04036 737-3000 727-0626A 731-04532 731-05476 731-05618 736-0185 736-0270 736-0315 736-0866 736-0452 736-3004 738-04189 738-04240 747-04496 748-04139 750-04676 750-04776 750-04777 783-04798 783-04799 783-05140 783-05184 783-05185 783-05380 783-05381 783-05404 783-05446 731-3020

Description Link, Connnecting Pin, Internal Cotter Washer, Sping, .39 x .75 x .010 Pin, Cotter, 5/32 x 1.25 Gear, Spur, 12T Gear, Spur, RH 13T Gear, Spur, LH 13T Axle, Pivot Bar End, Ball Joint Rod End, Ball Joint Rod, LH Thrd.

Fitting, Grease Cylinder, Damper Cover, Steering Wheel Cover, Steering Gear, RH Cover, Steering Gear, LH Washer, Flat, .375 x .738.063 Washer, Bell, .265 x .75 x .062 Washer, Flat, .76 x 1.5 x .12 Washer, Flat, .755 x 1.92 x .060 Washer, Bell, .396 x 1.14 x .095 Washer, Flat, .406 x .875 x .105 Shaft, Steering, .625 x 17.281 Nut, Shoulder, .375 x .5 Rod, 3/8-24 x 14.4 Lg Block, Steering Shaft Spacer, .385 x .63 x .75 Spacer, .380 x .625 x .265 Spacer, .26 x .372 x .33 Bracket, Steering Support, LH Bracket, Steering Support, Upper Bracket, Steering Support, RH Plate, Base Cover, RH Plate, Base Cover, LH Link, Steering/Hydro RH Bracket, Hydro/Steering Adjustment Link, Steering/Hydro LH Bracket, Steering Link Hub Cap

i1046 & i1050/Series i1000 10

SECTION HM12

Transmission Drive & Controls

26 27

1 B

30 45 8 70

37

11

43

80

50

65

21

C

66

9 55

27

46 33

20

69

10

29

26

65 45 8

58

72

B

59 61

64

57

63

34

12

24 2

71

8

41

62

13

16

44

15

61

19 3

28

18

48

40

54

77

30

22

78

51

67

23 43

30

52

49 47

31

56 17 28

35

5

17

42

52

68 30

C

7

51

76

11

25

73

75 6

38

74

53

30

39

32

14

30

36

79

60

4

i1046 & i1050/Series i1000 11

SECTION HM12

Transmission Drive & Controls Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

Part No. 17840 618-04317 634-04239 734-1730 934-0255 647-04061 647-04094 683-0267C 683-04314A 710-0347 710-0514 710-0607 710-0726 710-0809 710-1266 710-1325 710-3073 710-3119 710-04484 710-04648 711-04554 711-0832 712-0346 712-0431 712-3004A 712-0290 712-3050 712-04063 712-04065 712-0375 714-0104 714-0111 715-0143 726-0214 731-05846 732-0209 732-0335 732-0716C 732-0814 735-0239 735-0662

Description Bracket, Transmission Mounting Hub, Wheel Wheel Assembly Tire, 20 x 8 x 8 Valve, Tubeless Air Shaft Assembly, Brake Control Shaft Assembly, Hydro Control Pedal Pedal Assembly, Hydro Control Bracket, Pedal Screw, Hex Cap, 3/8-16 x 1.75 Gr5 Screw, Hex Cap, 3/8-16 x 1.0 Gr5 Screw, Hex Wash Hd. Tapp, 5/16-18 x .5 Screw, Hex Wash Hd. Tapp, 5/16-12 x .75 Screw, Hex Wash Hd. Tapp, 1/4-20 x 1.25 Screw, Hex Cap, 5/16-18 x 3.5 Gr5 Screw, Hex Wash Hd. Tapp, 1/4-20 x 1.625 Screw, Hex Cap, 5/16-18 x 2.25 Gr5 Screw, Hex Cap Lock, 3/8-16 x .75 Gr5 Screw, Hex Wash Hd. Tapp, 5/16-18 x .75 Screw, Hex Cap, 7/16-14 x 8.5 Gr5 Spacer, .479 x .75 x 4.97 Ferrule, 3/8-24 x .375 Dia. Nut, Hex Jam Insert Lock, 1/2-20 Gr5 Nut, Hex Flange Top Lock, 3/8-16 GrF Nut, Hex Flange Lock, 5/16-18 Gr5 Nut, Hex Lock, 7/16-14 GrA Nut, Lug, 7/16-14 Nut, Hex Flange Insert Lock, 5/16-18 GrF Nut, Hex Flange Insert Lock, 3/8-16 GrF Nut, Hex Lock, 3/8-16 Pin, Internal Cotter Pin, Cotter, 3/32 x 1/0 Pin, Spirol, .25 x 1.25 Cap, Push, 5/8 Fan, Hydro Spring, Extension, .48 x 2.03 Spring, Compression, .405 x 1.17 Spring, Extension, .59 x 4.0 Spring, Extension, .56 x 5.52 Pad, Foot, 4.0 in. Lg Pad, Hydro Control Pedal

Ref. No. 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

Part No. 736-3027 736-0227 736-0290 736-3010 736-3039 736-3050 736-04263 738-0129 738-0143 738-0155 738-0347 741-0225 741-3065B 747-04562 747-04584A 747-04598 747-04629 747-04649 748-04155 750-04776 750-0555 750-0566A 754-04134 756-04209 756-04274 756-0981B 783-04570A 783-04881 783-04981 783-05330 783-05473 916-04339A 918-04342A 17962 710-0224 710-0227 725-04039 725-1644 726-0320 725-04374 710-0599

Description Washer, Flat, .531 x 1.75 x .09 Washer, Flat, .39 x 1.5 x .134 Washer, Flat, .625 x 1.0 x .067 HT Washer, Flat, .407 x .812 x .135 HT Washer, Flat, .406 x 1.5 x .105 Washer, Flat, .406 x .812 x .051 Washer, Hydro Lock Bolt, Shoulder, 3/8-16: .5 x 2.0 Bolt, Shoulder, .496 x .336: 3/8-16 Bolt, Shoulder, .435 x .160 : 5/16-18 Spacer, Shoulder, .625 ID x .169 Bearing, Hex Flange Bearing, Hex Flange, .625 ID Split Rod, Park Brake Rod, Brake Rod, Drive Engage Bracket, Brake Pedal Rod, Hydro Dump Spacer, T-Axle Spacer, .38 x .625 x .265 Spacer, .254 x .5 x .39 Spacer, .26 x .372 x 1.03 V-Belt, 88.4 Pulley, V Type Drive, 3.06 Pulley, V Type, 4.5 Pulley, Flat Idler, 2.75 Arm, Idler Bracket, Foot Pedal Support Bracket, Park Brake Bracket, Support Bracket, Belt Keeper Transmission, Hydro RH Transmission, Hydro LH Plate, Switch Screw, Hex Wash Hd. Tapp, #10-16 x .5 Screw, Hex Wash Hd. Tapp, #8-18 x .5 Switch, Brake Switch, Reverse Plate, Insulator Nut Harness, Reverse Jumper Screw, Hex Wash. Hd. Tapp, 1/4-20 x .5

i1046 & i1050/Series i1000 12

SECTION HM12

Engine Mounting & Connections

For Choke 9 11 6

16

8

7

14 21 22

18 20

15

7

13

17 1 10

19

4 5

3 23

12

2 3

i1046 & i1050/Series i1000 13

SECTION HM12

Engine Mounting & Connections

Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Part No. 683-04256 710-0227 710-0599 710-0642 710-0654A 712-3005 725-0157 726-0154 726-0205 728-04000 736-0300 751-0564B 751-10006 751-10007 751-10161 751-10349 751-10353 751-3140 751-3141 751-3142 783-04783 783-04870 783-04872 737-3030A

Description Shield, Muffler Screw, Hex Wash Hd. Tapp, #8-18 x .5 Screw, Hex Wash Hd. Tapp, 1/4-20 x .5 Screw, Hex Wash Hd. Tapp, 1/4-20 x .75 Screw, Hex Sems Tapp, 3/8-16 x 1.0 Nut, Hex Flange Lock, 3/8-16 Gr5 Tie, Cable Tie, Push Mount Cable Clamp, Hose Rivet, Pop, .188 x .3 Washer, Flat, .406 x .875 x .059 Deflector, Muffler Pipe, Exhaust RH Pipe Exhaust LH Muffler, Dual Inlet Hose, Fuel ; Low Permeation, 51 inches Deflector, Muffler Valve, Oil Drain Hose, Oil Drain Extension Cap, Drain Valve Shield, Heat Bracket, Muffler LH Bracket, Muffler RH Oil, 10W30 Engine

i1046 & i1050/Series i1000 14

SECTION HM12

Steering Gear Box

13

18

10

30

16

12 1 13

10

37

11

14 5

33 - 36 6

A 45

33 - 36 7

25 17

20

17

23

43 44

28

39 29

42 15

27

21 3

41

40 A

25

22 31

9

43

19 24

26

20

2 4

28

44

8

i1046 & i1050/Series i1000 15

SECTION HM12

Steering Gear Box Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 39 40 41 42 43 44 45

Part No. 607-04342 617-04036 617-04037 619-04153 737-0148 619-04154 647-04083 647-04084 647-04085 647-04086 703-2441 710-0599 710-04040 710-0778 710-0809 711-04587 712-3005 716-0102 716-0111 716-0114 716-0115 716-04066 717-04318 717-04319 717-04328 717-04330 718-04229 718-04269 721-04186 732-0306A 732-1162 736-0369 736-04237 736-04257 736-04258 736-04259 736-04260 736-0864 741-04202 741-04203 741-04204 741-04206 741-04231 741-04235 741-0747

Description Bracket, Steering Box Return Gear, Bevel LH Gear, Bevel RH Housing, Steering Lower Grease, Darina Housing, Steering Upper Arm, Hydro LH Arm, Hydro RH Cam, Hydro LH Cam, Hydro RH Arm, Neutral Screw, Hex Wash Hd. Tapp, 1/4-20 x .5 Screw, Shoulder, .497 x .75 : 3/8-16 Screw, Hex Wash Hd. Tapp, 1/4-20 x 1.5 Screw, Hex Wash Hd. Tapp, 1/4-20 x 1.25 Shaft, Steering Nut, Hex Flange Lock, 3/8-16 Gr5 Ring, Snap, 1.0 Dia. Shaft Ring, External Retaining, .875 Shaft Ring, Retaining, .56 Dia. Shaft Ring, Retaining, .56 Dia. Shaft Ring, Retaining, .31125 Dia. Shaft Gear, Pinion, 7T Gear, Synchro Rack Gear, Steering, 17T Gear, Steering, 26T Tube, Coupler Cam, Hydro Steering O-Ring, .625 x .07 Spring, Compression, .531 x 1.75 Spring, Extension, .56 x 2.31 x .105 Washer, Flat, .508 x 1.0 x .02 Washer, Flat, .508 x 1.32 x .04 Washer, Flat, 1.015 x 1.375 x .005 Washer, Flat, 1.015 x 1.375 x .010 Washer, Flat, 1.015 x 1.375 x .015 Washer, Flat, 1.015 x 1.375 x .030 Washer, Thrust, .375 x .812 x .06 Bearing, Nylon Caster Bearing, Flange, .5 x .7 Bearing, Sleeve, .437 x .3425 Bearing, Sleeve, .623 x .5025 x .25 Bearing, Sleeve, 1.2 x 1.0 Bearing, Flange, .625 x .875 Bearing, Ball, .5625 x 1.375 x .4375

i1046 & i1050/Series i1000 16

SECTION HM12

46” Mowing Deck 51

7

13 52

1

45

14

1

50

46

46

C

56

57

58

26 1

50 38

16

D

8

3

20 2

61

49

25

28

24

21

60

5

37

1

A

34

63

44

B

58

57

37

5 62

42 5 27

19

22

59

25 10 17

29 31

6

8

4

17

23

99

27

42

30

39

19

36

35 53

18

D

13

55 43 33

12

13 54

47

8

9

32

B

15

48

7

C

7

A 40

41 14

14

41

14

11

i1046 & i1050/Series i1000 17

SECTION HM12

46� Mowing Deck Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Part No. 918-0660 683-0254B 683-04278 683-04335 710-0347 710-0528 710-0599 710-1260A 710-3015 710-3103 712-0206 712-04063 712-04065 712-0417A 712-0641 712-3006 712-3010 712-3083 714-0111 714-0162 715-0108 717-04074 721-04041 726-0233 726-0269 731-3005 732-0306A 732-0594A 732-0826A 734-04155 736-0119 736-0225 736-0247

Description Spindle Assembly Bracket, Deck Hanger, LH Bracket, Idler Deck Assembly Screw, Hex Cap, 3/8-16 x 1.75 Gr5 Screw, Hex Cap, 5/16-18 x 1.25 Gr5 Screw, Hex Wash. Hd. Tapp, 1/4-20 x .5 Screw, Hex Wash. Hd. Tapp, 5/16-18 x .75 Screw, Hex Cap, 1/4-20 x .75 Gr5 Screw, Hex Cap, 5/16-18 x 2.0 Gr5 Nut, Hex, 1/2-13 Gr5 Nut, Hex Flange Insert Lock, 5/16-18 GrF Nut, Hex Flange Insert Lock, 3/8-16 GrF Nut, Hex Flange, 5/8-18 Nut, Hex, M16-1.5 Nut, Hex, 1/4-20 Gr5 Nut, Hex, 5/16-18 Gr5 Nut, Hex Insert Lock, 1/2013 Pin, Cotter, 3/32 x 1.0 Pin, Cotter, 5/32 x 1.25 Pin, Spring, 1/4 x 1.0 Gear, Deck Adjust Adapter, Water Nozzle Nut, Push, .25 x .5 Nut, Push On Speed, 3/8 Thrd.

Roller, Front Spring, Compression, .531 x 1.75 Spring, Extension, .91 x 7.33 Spring, Extension, .865 x 4.68 Wheel, Deck Ball, 5.0 Washer, Lock, 5/16 Washer, Internal Tooth Lock, 5/8 Washer, Flat, .406 x 1.25 x .157 HT

Ref. No. 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

Part No. 736-0270 736-0343 737-04003C 738-04162a 738-04235 738-3056 942-04124 942-04125 747-1116 747-1130B 750-1206 754-04118 756-04129 783-0141 783-0142 783-05118 783-05397 783-0747B 783-0805C 710-0134 712-3087 731-05264 756-1188 750-0952 741-0919 738-1186 737-3000 619-0042A 17983 931-1032B 703-1693A 711-0792 726-0106 732-0602A

Description Washer, Belleville, .265 x .75 x .062 Washer, Flat, .33 x 1.25 x .12 Nozzle, Deck Wash Spacer, Shoulder, .884 x .190 Shaft, 1/2 Dia x 20.8 Bolt, Shoulder, .496 x 2.5:3/8-16 Blade, 3 in 1 Star, 14.88 Blade, 3 in 1 Star, 16.28 Rod, Deck Release Rod, Deck Front Hanger Spacer, .542 x .75 x .5 V-Belt, Type A x 122.5 Pulley, Idler, 4.25 Dia Skirt, Deck Center Skirt, Deck RH Bracket, Idler Bracket, Roller Height Cover, Deck Belt LH Cover, Deck Belt RH Screw, Carriage, 1/4-20 x .62 Gr2 Nut, Wing, 1/4-20 Plug, Mulching Pulley, Deck, 5.75 Dia Spacer, .792 x 1.06 x 1.8 Bearing, Ball Shaft, Spindle, 6.05 Lg Fitting, Lube Housing, Spindle Shield, Bearing Chute Assembly, Discharge Bracket, Hinge Mounting Pin, Hinge, .25 x 6.75 Nut, Push Cap Speed, 1/4 Spring, Torsion

i1046 & i1050/Series i1000 18

SECTION HM12

50” Mowing Deck 52 10

43 16 57

34

28

59

40

49 29

2

7

10

53

22

50

31

51 7

21

51

19

65

62

63

60

2

66

2

40

12

2

40

42

21

B A

46

9

63 62

13

3

35

56

32

38

8

64

21

36

61

4

30

1 11

33 41

44

21

37

21

23

B

21

17

21 5 47

6

15

48

11 54 14 58

18

55

20

45

14

22

A 45 45 22

48

9

9

39 24

27

22

34

26

i1046 & i1050/Series i1000 19

SECTION HM12

50� Mowing Deck Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Part No. 16606 618-04126A 683-0254B 683-04336 703-3279 793-3511A 710-0347 710-0528 710-0599 710-0607 710-1260A 710-3005 710-3103 710-3168 710-3178 711-0332 711-1737 712-0206 712-0229 712-04063 712-04065 712-0417A 712-0431 712-0641 712-3010 712-3083 714-0111 714-0145 714-0162 714-0470 715-0108 717-04074 721-04041 731-3005

Description Bracket, Hook Retainer Spindle Assembly Bracket, Deck Hanger LH Deck Assembly Bracket, Chute Stop Guard, Finger Screw, Hex Cap, 3/8-16 x 1.75 Gr5 Screw, Hex Cap, 5/16-18 x 1.25 Gr5 Screw, Hex Wash. Hd. Tapp, 1/4-20 x .5 Screw, Hex Wash. Hd. Tapp, 5/16-18 x .5 Screw, Hex Wash. Hd. Tapp, 5/16-18 x .75 Screw, Hex Cap, 3/8-16 x 1.25 Gr5 Screw, Hex Cap, 5/16-18 x 2.0 Gr5 Screw, Carriage, 3/8-16 x 1.0 Screw, Carriage, 3/8-16 x .75 Pin, Clevis, .5 x .78 Pin, Roller, .5 x 10.06 Nut, Hex, 1/2-13 Gr5 Nut, Push, 3/8 Nut, Hex Flange Insert Lock, 5/16-18 GrF Nut, Hex Flange Insert Lock, 3/8-16 GrF Nut, Hex Flange, 5/8-18 Nut, Hex Flange Lock, 3/8-16 GrF Nut, Hex, M16-1.5 Nut, Hex, 5/16-18 Gr5 Nut, Hex Insert Lock, 1/2013 Pin, Cotter, 3/32 x 1.0 Pin, Click, .092 x 1.64 Pin, Cotter, 5/32 x 1.25 Pin, Cotter, 1/8-1.25 Pin, Spring, 1/4 x 1.0 Gear, Deck Adjust Adapter, Water Nozzle Roller, Front

Ref. No. 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

Part No. 732-0306A 732-0459C 734-04155 736-0119 736-0225 736-0300 737-04003C 738-04162A 738-04235 738-3056 942-04053A 747-1116 747-1324 750-0151 750-1206 754-04077 756-04129 783-04399 783-04400 783-04414 783-04415 783-05303 783-05411 731-04651 736-0315 737-3000 738-1010A 747-0919 750-1000 750-1349 756-1171 631-04070A 711-04565 732-04372 783-05030

Description Spring, Compression, .531 x 1.75 Spring, Extension, .94 x 6.74 Wheel, Deck Ball, 5.0 Washer, Lock, 5/16 Washer, Internal Tooth Lock, 5/8 Washer, Flat, .406 x .875 x .059 Nozzle, Deck Wash Spacer, Shoulder, .884 x .190 Shaft, .5 x 20.8 Bolt, Shoulder, .496 x 2.5:3/8-16 Blade, 2 in 1 Star, 17.9 Rod, Deck Release Rod, Deck Front Hanger Spacer, .55 x .75 x 1.125 Spacer, .542 x .75 x .5 V-Belt, B Sec., 134 in.

Pulley, Idler, 4.25 Dia. Cover, Belt, LH Cover, Belt, RH Skirt, Deck Center Skirt, Deck RH Bracket, Idler, Bracket, Height Adjust Plug, Mulch Washer, Flat, .76 x 1.5 x .12 Fitting, Lube Shaft, Spindle Bearing, Ball Spacer, .80x 1.10 x 1.322 Spacer, .79 x 1.84 x .55 Pulley, Deck Chute Assembly, Discharge Pin, Hinge, .3125 x 14.06 Spring, Torsion, .44 x 2.1 Bracket, Chute Mounting

i1046 & i1050/Series i1000 20

SECTION HM12

RH Transmission Assembly

59

34 34

157

33

51

31

30

50 49

75

14 7

28 27

154 73

15

29

158

138

16

32

13

100

160 159 74 156 155 153

53 8

151

48 150

10

47

46 45

8

41 19

1

44

43

35

2

42

9

41

4 35 6

5 40

24

131 141

57 20 39 61

134

140 38 37 36

23 135

25

i1046 & i1050/Series i1000 21

SECTION HM12

RH Transmission Assembly

Ref. No. 1 2 4 5 6 7 8 9 10 13 14 15 16 19 20 23 24 25 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Part No. HG-71585 HG-71586 HG-70723 HG-52527 HG-70331 HG-9005110-5600 HG-9004800-2506 HG-51190 HG-70719 HG-51626 HG-51628 HG-51625 HG-51627 HG-51048 HG-51140 HG-52682 736-0371 HG-51812 HG-2003014 HG-2003017 HG-51062 HG-50315 HG-2000022 HG-50951 HG-51161 HG-50329 HG-50551 HG-44371 HG-44145 HG-51767 HG-52579 HG-51069 HG-50132 HG-51766 HG-51043

Description Housing Assembly, Main RH Side Assembly, RH Block Kit - 7 Piston Spacer, .32 x 1.005 x .179 Block Assembly, Cylinder Plug, Straight Thread Pin Screw, Hex Flange Seal, Oil Seal, Lip Ring, Retaining, .375 Ext. Rod, Bypass Ring, Retaining, .75 Int. Swashplate, Trunnion Seal, Lip Arm, Control Washer, Flat, .34 x .88 x.06 Screw, 5/16-24 x 1.0 Spring, Block Washer, Thrust Shaft, Input Bearing, Ball Ring, Retaining Spacer Seal, Lip Ring, Retaining Bearing, Thrust Washer, Flat, 5/8 x 1.0 x .05 Ring, Retaining Gear, Pinion, 12T Shaft, Motor Washer, Motor Shaft Washer, HT Gear, 10T/49T Gear, 10T Jackshaft

Ref. No. 44 45 46 47 48 49 50 51 53 57 59 61 73 74 75 100 131 134 135 138 140 141 150 151 153 154 155 156 157 158 159 160

Part No. HG-51083 HG-52531 HG-52541 HG-52532 HG-52542 HG-52683 HG-51517 HG-51518 HG-70868R HG-71530 HG-71006 HG-71497 HG-44433 HG-44094 HG-50884 HG-52473 HG-51616 HG-51950 HG-52401 HG-71510 HG-51946 HG-52432 917-0678 917-0682 HG-62589 HG-23711 941-0343 HG-50919 HG-51146 936-0371 712-0335 914-0507 HG-50928 HG-70853

Description Pin, Jackshaft Ring, Retaiining Gear, Bull, 52T Washer, 1.018 x 1.57 x .105 Bearing, Sleeve Shaft, Axle Bearing, Sleeve Seal, Lip Plate Kit, Expansion RH Kit, Center Section RH Kit, Bypass Arm RH Filter Assembly Screw, Hex Arm, Brake Spring, Brake Rotor, Brake Screw, Patch, 5/16-24 x 1 Washer, .343 x 1.5 x .062 Spring, Extension Kit, Breather Arm, Neutral, RH Kit, Scissors Arm Puck, Brake Plate, Puck Assembly, Brake Yoke Spacer, Torsion Spring Pin, Actuating Spring, Brake Bolt, Special Flange Washer, Flat Nut, Castle, 5/16-24 Pin, Cotter, 3/32 x .75 Sealant Seal Kit

i1046 & i1050/Series i1000 22

SECTION HM12

LH Transmission Assembly 59 16

32

15

138

34 33 34 51

31 30

14

29 28 27

13

50

8

47

46

49

48 1 53

45

8

2

19

41 44 43

9

74

157 155

154

6 57 10 73

153

100 40

5

156 24 160

35

151

159

158

4

42

150 75

41

35

134 131 23 135

141

140

37 20 36

38

39

61

i1046 & i1050/Series i1000 23

SECTION HM12

LH Transmission Assembly Ref. No. 1 2 4 5 6 7 8 9 10 13 14 15 16 19 20 23 24 25 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Part No. HG-71030L HG-71031L HG-70723 HG-51949 HG-70331 HG-9005110-5600 HG-9004800-2506 HG-51190 HG-70719 HG-51626 HG-51628 HG-51625 HG-51627 HG-51048 HG-51140 HG-52681 736-0371 HG-51812 HG-2003014 HG-2003017 HG-51062 HG-50315 HG-2000022 HG-50951 HG-51161 HG-50329 HG-50551 HG-44371 HG-44145 HG-51767 HG-52579 HG-51069 HG-50132 HG-51766 HG-51043

Description Housing Assembly, Main RH Side Assembly, RH Block Kit - 7 Piston Spacer, .32 x 1.005 x .179 Block Assembly, Cylinder Plug, Straight Thread Pin Screw, Hex Flange Seal, Oil Seal, Lip Ring, Retaining, .375 Ext. Rod, Bypass Ring, Retaining, .75 Int. Swashplate, Trunnion Seal, Lip Arm, Control Washer, Flat, .34 x .88 x.06 Screw, 5/16-24 x 1.0 Spring, Block Washer, Thrust Shaft, Input Bearing, Ball Ring, Retaining Spacer Seal, Lip Ring, Retaining Bearing, Thrust Washer, Flat, 5/8 x 1.0 x .05 Ring, Retaining Gear, Pinion, 12T Shaft, Motor Washer, Motor Shaft Washer, HT Gear, 10T/49T Gear, 10T Jackshaft

Ref. No. 44 45 46 47 48 49 50 51 53 57 59 61 73 74 75 100 131 134 135 138 140 141 150 151 153 154 155 156 157 158 159 160

Part No. HG-51083 HG-52531 HG-52541 HG-52532 HG-52542 HG-52683 HG-51517 HG-51518 HG-70868L HG-71529 HG-71357 HG-71497 HG-44433 HG-44094 HG-50884 HG-52473 HG-51616 HG-51950 HG-52401 HG-71510 HG-51945 HG-52432 917-0678 917-0682 HG-62589 HG-23711 941-0343 HG-50919 HG-51146 936-0371 712-0335 914-0507 HG-50928 HG-70853

Description Pin, Jackshaft Ring, Retaiining Gear, Bull, 52T Washer, 1.018 x 1.57 x .105 Bearing, Sleeve Shaft, Axle Bearing, Sleeve Seal, Lip Plate Kit, Expansion Kit, Center Section Kit, Bypass Arm RH Filter Assembly Screw, Hex Arm, Brake Spring, Brake Rotor, Brake Screw, Patch, 5/16-24 x 1 Washer, .343 x 1.5 x .062 Spring, Extension Kit, Breather Arm, Neutral Kit, Scissors Arm Puck, Brake Plate, Puck Assembly, Brake Yoke Spacer, Torsion Spring Pin, Actuating Spring, Brake Bolt, Special Flange Washer, Flat Nut, Castle, 5/16-24 Pin, Cotter, 3/32 x .75 Sealant Seal Kit

i1046 & i1050/Series i1000 24

SECTION HM12

i1046 & i1050 Crankcase; Crankshaft; and Dipstick

1

2

5

3 4

7

6

8 9 10 11

25

23 21

22 12 20

24

19

18

16

14 17

15

13

i1046 & i1050/Series i1000 25

SECTION HM12

i1046 & i1050 Crankcase; Crankshaft; and Dipstick Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

18 19 20 21 22 23 24 25

Part No. KH-32-028-01-S KH-25-153-02-S KH-M-545013-S KH-12-123-04 KH-12-153-02-S KH-12-153-01-S KH-24-126-19 KH-24-032-01-S KH-24-018-04 KH-12-402-02 KH-24-380-16-S KH-24-067-16-S KH-32-874-06-S KH-32-874-08-S KH-32-874-09-S KH-24-018-01-S KH-24-108-11-S KH-24-108-06-S KH-12-422-07-S KH-12-422-08-S KH-12-422-09-S KH-12-422-10-S KH-12-422-11-S KH-12-422-12-S KH-12-422-13-S KH-32-012-01-S KH-28-032-09-S KH-24-018-09-S KH-M-931010-S KH-24-468-15-S KH-24-144-38-S KH-32-014-04-S KH-52-139-09-S

Description Dipstick Assembly (Incl. Ref.2) O-Ring, Dipstick Screw, Flnge Thrd. Frmng M5 x .8 x 13 Kit, Oil Fill Tube (Incl. Ref. 5,6) O-ring, Upper Fill Tube O-ring, Lower Fill Tube Bracket, Fill Tube Seal, Oil Crankcase - Use Short Block Retainer, Breather Reed Reed, Breather Pin, Locating Connecting Rod (Std.) Kit, Piston w/Ring Set (Std.) Kit, Piston w/Ring Set (.25) Kit, Piston w/Ring Set (.08) Retainer, Piston Pin Ring Set (Std. & .08) Ring Set (.25) Shim, Camshaft (White .028) Shim, Camshaft (Blue .03) Shim, Camshaft (Red .032) Shim, Camshaft (Yellow .034) Shim, Camshaft (Green .036) Shim, Camshaft (Gray .038) Shim, Camshaft (Black .04) Kit, Camshaft Seal, Governor Cross Shaft Retaining Ring Washer, Flat, 9mm Washer, Flat, 11/32 Shaft, Governor Cross Crankshaft (Incl. Ref. 25) Plug, Cup

i1046 & i1050/Series i1000 26

SECTION HM12

i1046 & i1050 Cylinder Head/Valves/Breather 13

15 16

4 2

9

17

10

1 5 6 7 8 3 11 33

18

31

32

19

30 20

21

22 23 24

26

25 27

2 28

29 3

12

14

i1046 & i1050/Series i1000 27

SECTION HM12

i1046 & i1050 Cylinder Head/Valves/Breather Ref. No. 1 2 3 4

Part No.

Description

KH-24-755-141-S KH-24-153-28-S KH-M-651030-S KH-32-318-01-S

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

KH-12-755-03 KH-12-173-01 KH-24-089-02 KH-235011-S KH-66-032-05-S KH-24-017-01 KH-24-016-01 KH-32-326-04-S KH-25-237-14-S KH-32-081-02-S KH-M-547050-S KH-32-468-01-S KH-32-072-02-S KH-32-019-01-S KH-32-411-02-S KH-24-841-03-S

21

KH-32-318-02-S

22 23 24 25 26 27 28 29 30 31 32 33

KH-32-186-02-S KH-32-100-04-S KH-32-086-03-S KH-24-599-02-S KH-12-086-16 KH-32-086-04-S KH-32-096-06-S KH-24-445-01 KH-M-645016-S KH-32-096-04-S KH-32-041-01-S KH-32-050-01-S

Kit, Rocker Cover (Incl. Ref.2 & 4pc Ref. 3) O-Ring, Valve Cover Screw, Flnge M6 x 1.0 x 30 Kit, #1 Cylinder Head (Incl. 4pc Ref. 26 and KH-24-841-03-S) Kit, Retainer Cap, Valve Spring Spring, Valve Retainer, Spring Seal, Valve Stem Valve, Intake (Std.) Valve, Exhaust (Std.) Kit, Breather Hose, (Incl. 1pc Ref. 13) Clamp, Hose Kit, Breather Housing (Incl. 15,16) Nut, Lock, M5 x 0.8 Washer, Sealing Stud, Breather Cover Kit, Tappet Rod, Push Kit, Cylinder Head Gasket (Incl. Head Mtg. Hardware and KH-24-041-49-S and KH-24153-27-S Kit, #2 Cylindre Head (Incl. 4pc Ref. 26 and KH-24-841-03-S) Arm, Rocker Nut, M10 x 0.75 Screw, Set Pivot, Rocker Arm Screw, Flange, M10 x 1.5 x 90 Screw, Flange, M6 x 1.0 x 45 Kit, Breather Valve Cover (Incl. 1pc Ref.2) Strap, Lifting Screw, Flnge Thrd. Frmng M6 x 1.0 x 16 Kit, Breather Cover (Incl. Ref. 32) Gasket, Breather Cover Filter, Breather Not Illustrated Gasket, Exhaust O-Ring

KH-24-041-49-S KH-24-153-27-S

i1046 & i1050/Series i1000 28

SECTION HM12

i1046 & i1050 Blower Housing/Baffles

2

3

1

11 4 5

3

10

4 7 9 6

7 7

7 8

4

i1046 & i1050/Series i1000 29

SECTION HM12

i1046 & i1050 Blower Housing/Baffles

Ref. No. 1

Part No. KH-32-027-03-S

2 3 4 5 6 7 8 9 10 11

KH-32-096-08-S KH-M-545016-S KH-M-645016-S KH-32-146-05-S KH-32-063-05-S KH-M-545010-S KH-32-063-02-S KH-32-063-03-S KH-32-063-06-S KH-24-086-12-S KH-41-037-10-S KH-32-113-20-S

Description Kit, Blower Hsng (Incl. Ref.2 & KH-41-037-10-S) Cover, Air Cleaner Screw, Flnge Thrd. Frmng M5 x 0.8x 16 Screw, Flnge Thrd. Frmng M6 x 1.0 x 16 Plate, Backing Baffle, Cyl. Barrel - #2 Side Screw, Flnge Thrd. Frmng M5 x 0.8x 10 Baffle, Valley #2 Side Baffle, Valley #1 Side Baffle, Cylinder Barrel - #1 Side Screw, Tap, M6 x 1.7 x 18 Not Illustrated Nameplate, Service Decal, Cub

i1046 & i1050/Series i1000 30

SECTION HM12

i1046 & i1050 Oil Pan/Filter

5

2

4 19

3 1

6 7

11 10

12

16

13 8

9 14

18

Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

17 15

Part No. KH-32-199-02-S KH-32-086-01-S KH-32-393-10-S KH-24-043-12 KH-12-380-01 KH-24-448-02-S KH-12-144-02 KH-52-032-08-S KH-32-123-01-S KH-32-123-03-S KH-24-153-01-S KH-32-029-07-S KH-25-139-60-S KH-32-153-04-S KH-32-136-03-S KH-25-099-27-S KH-52-050-02-S KH-24-086-17-S KH-25-139-57-S

Description Pan Assembly, Oil (Incl. Ref. 2-15) Screw, Flnge Thrd. Frmng M6 x 1.0 x 26.5 Pump Assembly, Oil Kit, Governor Gear w/Pin (Incl. Ref. 5) Pin, Governor Regulating Tab, Locking Shaft, Governor Gear Seal, Oil (PTO End) Tube, Oil Feed - Filter to Pan Tube, Oil Feed - Pan to Filter O-Ring, Oil Pick-up Kit, Oil Filter Adapter Plug, Pipe, 1/8 O-Ring, Oil Filter Adapter Nipple, Oil Filter Switch, Oil Pressure Filter, Oil Screw, Flange, M8 x 1.25 x 45 Plug, Sq. Hd. Pipe, 3/8 NOT USED- Replaced by Oil Drain Valve

i1046 & i1050/Series i1000 31

SECTION HM12

i1046 & i1050 Air Filter/Intake Manifold 10

9 7

8 1

2 6 5

3 4

Ref. No. 1 2 3 4 5 6 7 8 9 10

Part No. KH-24-164-51-S KH-24-041-52-S KH-24-153-27-S KH-32-094-04-S KH-24-041-14 KH-32-344-02-S KH-32-083-03-S KH-X-25-63 KH-M-651040-S KH-32-083-05-S

Description Manifold, Intake Gasket, Carburetor O-Ring, Intake Port Base, Air Cleaner w/Gasket, Latch Gasket, Air Cleaner Base Latch, Air Cleaner Element Element, Air Filter Washer, Flat, 1/4 Screw, Flange, M6 x 1.0 x 40 Pre-Cleaner, Element

i1046 & i1050/Series i1000 32

SECTION HM12

i1046 & i1050 Flywheel/Electrical

1

2 3 4

5

16 15

6

13 14

7

12 8

11 10

9

i1046 & i1050/Series i1000 33

SECTION HM12

i1046 & i1050 Flywheel/Electrical

Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Part No. KH-32-162-03-S KH-12-086-14 KH-12-468-03 KH-20-146-02-S KH-32-157-01-S KH-32-025-08-S KH-X-42-15 KH-236602-S KH-M-551016-S KH-41-403-09 KH-237878 KH-235173 KH-M-548025-S 759-3336 KH-24-584-45-S KH-M-545020-S KH-25-454-03-S KH-32-176-02-S

Description Screen, Grass Screw, Flange, M10 x 1.5 x 45 Washer, Flat 13/32 Plate, Fan Mounting Fan Flywheel Key, 3/16 x 5/8 Connector (3 Contact) Screw, Flange, M5 x 0.8 x 16 Rectifier-Regulator Kit, 15 Amp Stator Clip, Cable Screw, Thrd. Frmng M5 x 0.8x 25 Plug, Spark Module, Ignition Screw, Flnge Thrd. Frmng M5 x 0.8x 20 Not Illustrated Tie, Wire Harness, Wiring

i1046 & i1050/Series i1000 34

SECTION HM12

i1046 & i1050 Fuel System/Carburetor

1 6

2

11

7

3 4

12 6

8

5 9

14 10 7

Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14

Part No. KH-32-853-03-S KH-32-853-04-S KH- 24-041-52-S KH-24-041-14 KHM-629105-S KH-M-641060-S KH-25-237-14-S KH-25-111-34-S KH-25-431-10-S KH-32-326-02-S KH-25-237-01-S KH-24-086-12 KH-24-393-16 KH-25-050-22-S KH-47-154-01-S KH-24-086-05 KH-X-25-63 KH-24-757-36-S KH-24-757-38-S KH-24-757-44-S KH-24-757-45-S KH-24-757-46-S

Description Kit, Carburetor (Incl. 2-3) Model i1046 ONLY Kit, Carburetor (Incl. 2-3) Model i1050 ONLY Gasket, Carburetor Gasket, Air Cleaner Base Stud, M6 x 1.0 x 106 Nut, Flange, M6 x 1.0 Clamp, Spring Hose 1/2 Line, Fuel (24�- Cut to Length Sleeve, Anti Abrasion Kit, Fuel Pump Hose w/Clamp (Incl. 10) Clamp, Hose Screw, Tap, M6 x 1.7 x 18 Pump, Fuel Filter, Fuel Clip, Cable Not Illustrated Screw, Throttle Stop - Model i1046 ONLY Washer, Flat, 1/4 Service Kit, Choke Repair Service Kit, Gasket Kit, Float Repair Kit, Solenoid Valve Repair Kit, Carburetor Overhaul Repair

13

i1046 & i1050/Series i1000 35

SECTION HM12

i1046 & i1050 Starter Motor

5

4

3

1

2 7

6

Ref. No. 1 2 3 4 5 6 7

Part No. KH-M-839080-S KH-32-098-01-S KH-12-755-39-S KH-12-755-38-S KH-32-141-01-S KH-32-211-01-S KH-12-243-04-S

Description Screen, Grass Screw, Flange, M10 x 1.5 x 45 Washer, Flat 13/32 Plate, Fan Mounting Fan Flywheel Key, 3/16 x 5/8

i1046 & i1050/Series i1000 36

SECTION HM12

i1046 & i1050 Engine Controls

5

6

4

2

3

1

7 9 8

26

27

10 23

24

25

22 21 20

18 19 15

17

11

16

14

13

12

i1046 & i1050/Series i1000 37

SECTION HM12

i1046 & i1050 Engine Controls

Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Part No. KH-24-211-03-S KH-24-090-33-S KH-M-641060-S KH-24-089-01 KH-25-158-08 KH-24-079-04 KH-25-158-11 KH-M-545016-S KH-M-547050-S KH-24-083-03 KH24-126-161-S KH-M-645016-S KH-47-237-02 KH-24-086-43-S KH-24-079-22-S KH-24-112-27-S KH-24-090-47-S KH-24-090-13 KH-24-468-01 KH-M-545020-S KH-41-468-03 KH-24-090-05 KH-M-403025 KH-M-446030-S KH-24-468-20-S KH-24-089-55-S KH-24-089-18 KH-24-089-25-S

Description Bolt, Carriage, M6 X 1.0 X 25 Lever, Governor Nut, Flange, M6 x 1.0 Spring, Linkage Bushing, Linkage Retainer Linkage, Throttle Bushing, Throttle Linkage Screw, Flng. Thrd. Frmng, M5 x 0.8 x 16 Nut, Lock, M5 x 0.8 Spring, Choke Return Bracket, Control Screw, Flnge Thrd. Frmng M6 x 1.0 x 16 Clamp, Dual Conduit Screw, Torx Hd. Ctsk, M5 x 0.8 x 16 Linkage, Choke Spacer, Control Assembly Lever, Throttle Actuator Lever, Throttle Control Washer, Flat, 5.5mm Screw, Flng. Thrd. Frmng, M5 x 0.8 x 20 Washer, Spring, 1/4 Lever, Choke Screw, Hex Cap, M4 x 0.7 x 25 Nut, M4 x 0.7 Washer, Flat, 5mm Spring, Governor Spring, Governor, Model i1046 ONLY Spring, Governor, Model i1050 ONLY

SECTION HM12 i1046 & i1050/Series i1000 38

Model i1046 Labels

777I22679 Top Of Engine

777X42472 UNDER HOOD M O D E L

i1046

Blades 942-04053A (3)

KH-32-083-03-S

Air Filter Ignition Keys

725-2054

REPLACEMENT PARTS Use o n ly C ub C a d e t ge n ui ne f a ct o r y pa rt s Pre-Cleaner/Element KH-24-083-05-S 618-04126 (3)

954-04134

w w w. c u b c a d e t . c o m

777I22615

X42474

725-04439

Solenoid

Engine To Deck/Deck Spindle Belt 954-04077

KH-25-050-22-S Deck Spindles KH-52-050-02

KH-12-132-02 / 759-3336 Lower Drive Belt

57.5 oz

Fuel Filter

Spark Plug Oil Filter Oil Capacity

777S30018

(QTY 2) 777I22708 Aside Trans.

Release Rods

Pull Rod Through Large Opening, Turn Lever To The Right And Release. I22708 AC

Release Both Transmission Release Levers B e f o r e M o v i n g V e h i c l e

1

2

777S32815 On Hitch Plate NWARNING OTICE

WHEN TOWING, GO SLOW AND MAKE WIDE TURNS TO AVOID JACK-KNIFING

777I22702 On Dash Cluster

777D10491 On Rear Fender

S30503

777D10501

777D01782 On Rear Hitch Plate

WARNING SHIELD MISSING DO NOT OPERATE.

(QTY2) 777S32807 Place On Both Gear Tops

777S30503

Gear Top

777I22707 Place Right Of Gas Guage

777D10615 Front Of Deck CUT

46

DANGER

KEEP HANDS AND FEET AWAY. DO NOT OPERATE MOWER UNLESS CHUTE DEFLECTOR OR ENTIRE GRASS CATCHER IS IN ITS PROPER PLACE.

ASSEMBLE CHUTE DEFLECTOR TO THIS UNIT BEFORE OPERATING.

(QTY2) 777D10624 Near Each Nozzle

SMART J ET D ECK WASH

777D10608 Centered Over 777S32771

TO START

777S32771 1. DISENGAGE BLADES/PTO, (POWER TAKE OFF)

2. DEPRESS REVERSE PUSH BUTTON. (RED INDICATOR LIGHT “ON”)

YOU MUST DISENGAGE BLADES/PTO, (POWER TAKE OFF) BEFORE TRAVELING IN REVERSE.

DANGER

ROTATING BLADES CAUSE SERIOUS INJURY OR DEATH • DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND • NEVER CARRY CHILDREN EVEN WITH BLADE(S) OFF. • LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING. • MOWING IN REVERSE IS NOT RECOMMENDED.

(LOCATED ON DRIVERS RIGHT)

HOW TO OPERATE

Grass Collection Bagging System Tire Chains 42" Snow Thrower Wheel Weight 42" Lawn Sweeper 46” Dozer Blade 10 & 17 Cu. Ft. Dump Carts Tractor Trunk Tool Box

SEAT ADJUSTMENT PULL HANDLE UP TO MOVE SEAT FORWARD

(LOCATED ON DRIVERS LEFT)

BRAKE/CLUTCH PEDAL

NOTE: IN BOTH MODES, WHEN OPERATOR LEAVES SEAT, ENGINE WILL STOP UNLESS PARKING BRAKE IS SET AND BLADES ARE DISENGAGED.

3. AFTER RESUMING FORWARD OPERATION, RETURN KEY TO “NORMAL MOWING” POSITION.

IMPORTANT: MOWING IN REVERSE IS NOT RECOMMENDED.

WHEN RED LIGHT IS “ON” MACHINE CAN BE OPERATED IN REVERSE WITH MOWER BLADES ENGAGED.

1. TURN KEY TO REVERSE CAUTION MODE POSITION.

REVERSE CAUTION MODE

NORMAL MOWING

OPERATING MODES

4. TURN KEY TO START ENGINE. AFTER START RELEASE KEY & DEACTIVATE CHOKE.

3. SET THROTTLE TO FAST “RABBIT” POSITION AND PULL CHOKE KNOB OUT.

2. ENGAGE THE TRACTOR’S PARKING BRAKE.

T O AV O I D S E R I O U S I N J U RY O R D E AT H

READ OPERATOR'S MANUAL

• GO UP AND DOWN SLOPES, NOT ACROSS. • AVOID SUDDEN TURNS. • DO NOT OPERATE THE UNIT WHERE IT COULD SLIP OR TIP. • IF MACHINE STOPS GOING UPHILL, STOP BLADE(S) AND BACK DOWNHILL SLOWLY. • KEEP SAFETY DEVICES (GUARDS, SHIELDS, AND SWITCHES, ETC.) IN PLACE AND WORKING. • REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE(S).

• KNOW LOCATION AND FUNCTION OF ALL CONTROLS. • BE SURE BLADE(S) AND ENGINE ARE STOPPED BEFORE PLACING HANDS OR FEET NEAR BLADE(S).

• BEFORE LEAVING OPERATOR'S POSITION, DISENGAGE BLADE(S), ENGAGE PARKING BRAKE, SHUT OFF AND REMOVE KEY.

O P T I O N A L AT TA C H M E N T S

777X42427 Left Lens

777D10494 In Molded On Hood

777D10496 In Molded On Hood

For Headlight 777X42426 Right Lens

D10494

D10496

1046

(QTY2) 777D10492 On Both Sides Place As Shown

M O D E L

i1050

KH-12-083-10

Blades

KH-12-050-08

57.5 oz

Oil Capacity

Solenoid

• KEEP HANDS AND FEET AWAY FROM ROTATING PARTS. • REMOVE OBJECTS THAT CAN BE THROWN BY THE BLADE IN ANY DIRECTION. WEAR SAFETY GLASSES. • DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND. NEVER CARRY CHILDREN EVEN WITH BLADES OFF. • USE EXTRA CAUTION ON SLOPES. DO NOT MOW SLOPES GREATER THAN 15°. MOW UP AND DOWN, NOT ACROSS. AVOID SUDDEN TURNS, USE LOW SPEED.

777S30015

777I22485

X42474

725-04439

Engine To Deck/Deck Spindle Belt 954-04118

w w w. c u b c a d e t . c o m

Oil Filter

918-0660 (3)

954-04134

725-2054

942-04124 (1) / 942-04125 (2)

KH-25-050-07-S Deck Spindles

Fuel Filter

Ignition Keys

KH-12-132-02 / 759-3336 Lower Drive Belt

Spark Plug

Pre-Cleaner/Element KH-12-083-12

Air Filter

REPLACEMENT PARTS U s e o nl y Cu b C ade t g e n u i ne f a c to r y p a r ts

READ OPERATOR'S MANUAL. KEEP SAFETY DEVICES IN PLACE AND WORKING.

S30015

Pull Rod Through Large Opening, Turn Lever To The Right And Release. I22708 AC

777X42474 UNDER HOOD

2

1

Release Both Transmission Release Levers B e f o r e M o v i n g V e h i c l e

(QTY 2) 777I22708 Aside Trans.

Release Rods

777I22679 Top Of Engine

CUT

50

(QTY2) 777D10609 Front Of Deck

WHEN TOWING, GO SLOW AND MAKE WIDE TURNS TO AVOID JACK-KNIFING

NWARNING OTICE

777S32815 On Hitch Plate

S30503

(QTY2) 777D10624 Near Each Nozzle

WARNING

SHIELD MISSING DO NOT OPERATE.

777D10501

777D01782 On Rear Hitch Plate

(QTY2) 777S32807 On Both Gear Tops

ASSEMBLE CHUTE DEFLECTOR TO THIS UNIT BEFORE OPERATING.

KEEP HANDS AND FEET AWAY. DO NOT OPERATE MOWER UNLESS CHUTE DEFLECTOR OR ENTIRE GRASS CATCHER IS IN ITS PROPER PLACE.

DANGER

777S30503

Gear Top

777I22707 Right Of Gas Guage

777D10491 On Rear Fender

777I22702 On Dash Cluster

O P T I O N A L AT TA C H M E N T S

READ OPERATOR'S MANUAL

TO START 1. DISENGAGE BLADES/PTO, (POWER TAKE OFF)

(LOCATED ON DRIVERS RIGHT)

HOW TO OPERATE

SEAT ADJUSTMENT PULL HANDLE UP TO MOVE SEAT FORWARD

(LOCATED ON DRIVERS LEFT)

BRAKE/CLUTCH PEDAL

NOTE: IN BOTH MODES, WHEN OPERATOR LEAVES SEAT, ENGINE WILL STOP UNLESS PARKING BRAKE IS SET AND BLADES ARE DISENGAGED.

3. AFTER RESUMING FORWARD OPERATION, RETURN KEY TO “NORMAL MOWING” POSITION.

IMPORTANT: MOWING IN REVERSE IS NOT RECOMMENDED.

WHEN RED LIGHT IS “ON” MACHINE CAN BE OPERATED IN REVERSE WITH MOWER BLADES ENGAGED.

2. DEPRESS REVERSE PUSH BUTTON. (RED INDICATOR LIGHT “ON”)

1. TURN KEY TO REVERSE CAUTION MODE POSITION.

REVERSE CAUTION MODE

YOU MUST DISENGAGE BLADES/PTO, (POWER TAKE OFF) BEFORE TRAVELING IN REVERSE.

NORMAL MOWING

OPERATING MODES

4. TURN KEY TO START ENGINE. AFTER START RELEASE KEY & DEACTIVATE CHOKE.

3. SET THROTTLE TO FAST “RABBIT” POSITION AND PULL CHOKE KNOB OUT.

2. ENGAGE THE TRACTOR’S PARKING BRAKE.

Grass Collection Bagging System Tire Chains 42" Snow Thrower Wheel Weight 42" Lawn Sweeper 46” Dozer Blade 10 & 17 Cu. Ft. Dump Carts Tractor Trunk Tool Box

• GO UP AND DOWN SLOPES, NOT ACROSS. • AVOID SUDDEN TURNS. • DO NOT OPERATE THE UNIT WHERE IT COULD SLIP OR TIP. • IF MACHINE STOPS GOING UPHILL, STOP BLADE(S) AND BACK DOWNHILL SLOWLY. • KEEP SAFETY DEVICES (GUARDS, SHIELDS, AND SWITCHES, ETC.) IN PLACE AND WORKING. • REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE(S).

• KNOW LOCATION AND FUNCTION OF ALL CONTROLS. • BE SURE BLADE(S) AND ENGINE ARE STOPPED BEFORE PLACING HANDS OR FEET NEAR BLADE(S).

• BEFORE LEAVING OPERATOR'S POSITION, DISENGAGE BLADE(S), ENGAGE PARKING BRAKE, SHUT OFF AND REMOVE KEY.

T O AV O I D S E R I O U S I N J U RY O R D E AT H

ROTATING BLADES CAUSE SERIOUS INJURY OR DEATH • DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND • NEVER CARRY CHILDREN EVEN WITH BLADE(S) OFF. • LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING. • MOWING IN REVERSE IS NOT RECOMMENDED.

DANGER

777S32771

SMART J ET D ECK WASH

777D10608 Centered Over 777S32771

D10494

1050

(QTY2) 777D10623 On Both Sides Place As Shown

777D10494 In Molded On Hood

D10496

777X42427 Left Lens

777D10496 In Molded On Hood

For Headlight 777X42426 Right Lens

i1046 & i1050/Series i1000 39 SECTION HM12

Model i1050 Labels