Condor 46Q-8 & 66Q-8 Self-Propelled Aerial Work Platform Operation & safety Manual - PDF DOWNLOAD

OPERATION AND SAFETY MANUAL

TELESCOPIC SELF-PROPELLED AERIAL WORK PLATFORM MODE LS 46Q-8 AND 66Q-8

For Your Own Safety and Protection • Read This Manual Completely Before Operating the Condor. cnL~vnR

• Retain This Manual on the Condor at all times.

CORPORATION 9200 S. SORENSEN AVE. • SANTA FE SPRINGS, CALIFORNIA 90870

92239

-

SPECIFICATIONS Naximum Platform Height Maximum Working Height Platform Size Rated Platform Capacity (Unrestricted) Overa 11 Length Overa 11 Hei ght Overall Width Wheelbase Travel Speed - Stowed Travel Speed - Raised Turning Diameter - Inside Gross Weight - Approximate Gradeability Tires - Pneumatic Turret Tail Swing Hydraulic Tank Capacity Fuel Tank Capacity

Model 46Q8

Model 66Q8

40 ft.

46 ft.

60 x30 x43.5" 500 lbs.

26 ft.

7 ft. - 10 in.

7 ft. - 10 in.

8 ft.

3.0 mph 1. 5 mph 14 ft.

13000 lbs.

18° (32%) 12x16.5 Load Range D Zero 27 Gal. 27 Gal.

60 ft.

66 ft.

60 x30 x43.5" 500 lbs.

31 ft.

7 ft. - 11 in.

7 ft. - 10 in.

8 ft.

2.5 mph 1. 25 mph 19 ft.

28000 lbs.

14° (25%) 15x19.5 Load Range F Zero 52 Gal. 40 Gal.

Il

I

I

I

OPERATIONAL FUflCTION TIMES 45 40 60 55 112

Lift - Up Lift - Down Telescope - Extend Telescope - Retract Rotate

Sec. Sec. Sec. Sec. Sec.

45 40 65 65 125

Sec. Sec. Sec. Sec. Sec.

13 13 26 26

Sec. Sec. Sec. Sec.

DRIVE SYSTEM TIMES - 50 ft. on firm level ground 18 18 33 33

High Speed - Forward High Speed - Reverse Low Speed - Forward Low Speed - Reverse

Sec. Sec. Sec. Sec.

The Condor Models are designed and built to conform to Calavar's understanding and interpretation of all applicable OSHA rules and regulations as well as ANSI standards: • • •

OSHA TITLE 29, PARAGRAPH 1910.67 -

Vehicle Mounted Elevating and Rotating Work Platforms - Labor OSHA TITLE 29, PARAGRAPH 1926.556 - Aerial Lifts Construction ANSI STANDARD A92.5 - 1980 - Self-Propelled Elevating Work Platforms

I

CAUTION'

It is imperative that all owners and operators of the Condor read, understand, and conform to these regulations.

Ultimate compliance to prevailing OSHA regulations is the RESPONSIBILITY of the employer utilizing the equipment.

-1-

DIMENSIONAL DATA

CONDOR 66Q8 TIP MOUNTED PLATFORM (Standard) i

i

!

!J:

i

I

~

'f /

I

1// I [II v !

j

"'-

I-

::::-

If

7~

~

J

SO'

j

~.

65'

55'

4"

"i'..

l .J ["I---

40' 1:

'\

~

-

70'

65' 60'

1I1 lJ f--

TOP MOUNTED PLATFORM (Optional) 70'

i\

-

.~

f--

3"

f--

30'

e

~

25'

i

20'

0.

~_:d

l-r

60'

'f

......

"'"

J:

o r-f--

15'

"'" "

VI

SO'

45'

\

40'

\ r----

"

~ Vl

f--

l\ h

lEI! ~

0'

r---

r--J

It.:t:-

--~

-5'

Platform Reach (from centerline of turret rotation)

I-I--

5'

I--

0'

-5'

~ Jr"'" f--

I-

~

II/I

55'

55' 50'

45'

7"'" II ~

TOP MOUNTED PLATFORM (Optional)

SO'

40'

'\

'\

30'

\

25'

\

20'

\

1: J:

!~

E 0

In ~

-:::-,

-""'"

~

n

0' -5'

-10' -S' 0'

S' 10' 15' 20' 25' 30' 35' 40' 45'

~

-

5'

tl

"'"

1/

_li b-,

i0.

15'

::::I

40'

II

10' ~

45'

11;1

35' .2' Q)

:::~

~

\

35'

'" \

30'

25'

1:

i'

J:

E 0

= .!!

Q.

\

J

20' 15' 10'

g

--.. 1Ift::~:-'H ...... ~

5' 0' -5'

-10' -5' 0' 5' 10' 15' 20' 25' 30' 35' 40' 45'

Platform Reach (from centerline of turret rotation)

Platform Reach (from centerline of turret rotation)

-2-

20'

-10' 10' 15' 20' 25' 30' 35' 40' 45' 50' 55' 60'

"

E

.2' 4> J:

E

0

15'

CONDOR 46Q8

IE

30'

25'

10'

Platform Reach (from centerline of turret rotation)

TIP MOUNTED PLATFORM (Standard)

35'

f--

I:t

I

-5' 0'

f--

\H

\

lI'fr;~

55'

I

I

~

10'

-10' -5' 0' 5' 10' 15' 20' 25' 30' 35' 40' 45' 50' 55' 60'

,

~

5'

-~It:

I

=

£

INTRODUCTION This manual is printed to assist the operator to better understand and operate the Self-Propelled Condor TELESCOPIC Aerial Work Platform in a safe and profici ent manner.

For the operator's safety and protection, THIS MANUAL MUST BE RETAINED ON THE CONDOR WORK PLATFORM AT ALL TIMES. DESCRIPTION OF CONDOR The Condor is a telescopic aerial work platform and is rugged, maneuverable, and safe. It is designed for work on firm level surfaces with normal operation controlled by an operator using a control box in the platform. All operational modes can be accomplished from the platform including drive and steer. The Condor provides industrial, construction and maintenance workers the ability to safely elevate and perform installation maintenance and replacement tasks.

The Condor Model 46Q8 is powered by a Wisconsin Model VG4D air-cooled gasoline engine rated, at 37 horsepower at 2400 R.P.~1. As an option, a Deutz Diesel engine Model F2L912 is utilized having a nominal horsepower rating of 30.

The Condor Model 66Q8 is powered by a Ford Model LSG-423 water-cooled gasoline engine rated, at 63 horsepower at 2800 R.P.M. As an option an Isuzu Model QD-60 water-cooled diesel engine is utilized with a horsepower rating of 60 at 3000 R.P.M. OPERATORS QUALIFICATION Each Condor TELESCOPIC UNIT has undergone a thorough Quality Control inspection at the factory. The design incorporates built-in safety features. A person of average skill can readily become proficient and safe in the operation of the CONDOR. It is a personnel lifting device and can be potentially dangerous in the hands of UNTRAINED or CARELESS OPERATORS. Knowing the characteristics of the machine and function of the controls is important to SAFE, PROPER OPERATION AND USE. Becoming familiar with the controls and practices will result in smooth accurate positioning.

It is the responsibility of all users to read and comply with the following rules and information designed to promote SAFETY and UNDERSTANDING of the Condor.

•

A thorough understanding of the operating characteristics and limitations of the CONDOR machine is always the first requirement for any user, regardless of his prior experience with similar types of equipment.

•

Only QUALIFIED/TRAINED and AUTHORIZED personnel must be ALLOWED to operate the Condor. A QUALIFIED/TRAINED operator is one who has READ and UNDERSTOOD the instructions in this manual, and is thoroughly familiar with the operating characterfstics and limitations of the machine.

-3-

•

REPAIR and ADJUSTMENTS should be made only by QUALIFIED/TRAINED personnel.

•

No MODIFICATION is to be made to the machine without prior written consent of the Calavar Engineering Department.

•

UNDERSTAND and OBEY all Federal, State and Local statutes and regulations applying to safe operation and use of aerial work platform.

YOUR SAFETY IS OUR UTMOST CONCERN AND YOUR RESPONSIBILITY

DANGER, CAUTION AND WARNING DECALS are designed for your protection. adhere to the information they provide.

Know and

ELEOROCUTION HAZARD YOU MUST NOT OPERATE THIS MACHINE

KEEP CLEAR

UNLESS YOU ARE QUALIFIED BY TRAINING AND EXPERIENCE IN THE SAFE OPERATION OF THIS MACHINE.

DEA'" 01 SERIOUS .,UIY (A" RESUlT FROM (ONTAO WITH THIS EQUIPMENT 01 VEHKlI IF IT SHOUlD I( El£(TRKAUY (HOUD. , ..., .•

TRA'NING INCLUDES COMPLETE KNOWLEDGE OF YOUR EMPLOYER'S WORK RULES. ALL GOVERNMENTAL REGULATIONS. AND MANUFACTURER'S OPERATOR ANO SAFETY MANUALS RElATIVE TO THIS MACHINE'S SAFE USE. AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO

DEATH OR SERIOUS INJURY

&

ELECTROCUTION HAZARD IIIIUII SAfE cuuAlcn Fla. merllCAl UIES All "tlIATlS ",U lUST All.. FO. 100. sin lOCI II SAl AI. mCTRICAl UIE All lOAt IIA"" TRIl Hilit .... PUTFO..

IDT """D( I'ItTECT"1 n.1 COITACT IITI •• raOJI.In T. AI mCTlICAUT ClA.SEI C.IOUCTOt !IV I,ST IIIITIiI A ClUIAIC( If AT LUST II FEU Ill.EEI AIT ,m .f TIlE .... PUff••• 01 LOll AI. AIT mCTRICAl UI£ .1 A"AlATUS AlIl'III lIP TI !.OOI taUI 01£ FOOT UIITIOIIt ClU ..ICE IS IUUIIED fOl fUn AtIll/DIll 31.011 lilTS 01 lEIl DUTIl 01 SUIOUS 'IJUIT I'll Inuu FlOI C'ITACT 01 'IAIEQUATE ClUIUU

..u

1.

2.

J. 4.

5.

8.

CAUTION

DO NOT OPERATE lHlS MACHINE UNLESS YOU ARE QUAUFIED BY lRAlNING " EXPERIENCE IN ITS SAFE OPERAllON. RAISE PLAWORM ONLY WHEN MACHINE IN ON A ARM, LEVEL SURFACE. DO NOT DRIVE ON SLOPE UNLESS PLAWORM IS FULLY LOWERED. IF SLOPE ALARM SOUNDS. CARRIAGE IS OUT OF LEVEL. RETRACT BOOM AND LOWER ARMS. 1HEN REPOSIllON MACHINE ON A FIRM, LE'tn. SURFACE. lHlS MACHINE IS NOT INSULATED. DO NOT OPERATE WllHlN 10 FEET OF ELEClRICAL POWER UNES. IN CASE OF EMERGENCY, PUSH POWER -OFF" BUnON ON lHE PLAWORM CONlROL CONSOLE.

-4-