CNH Multi-purpose circuit proportional control kit CX210D Crawler excavator Instructions Manual

INSTALLATION INSTRUCTIONS

KG2RP461-00

MULTI-PURPOSE CIRCUIT PROPORTIONAL CONTROL KIT

APPROXIMATE INSTALLATION TIME: 32.0 hours

San - 48010285 Issue date May 2016 EN

KG2RP461-00 - MULTI-PURPOSE CIRCUIT PROPORTIONAL CONTROL KIT CASE CONSTRUCTION CX210D

San - 48010285 Issue date May 2016 EN

Contents 1 KIT CONTENT Kit content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

2 PRE-ASSEMBLY PREPARING FOR ASSEMBLY Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

3 ASSEMBLY MULTI-PURPOSE CIRCUIT PROPORTIONAL CONTROL KIT Boom line installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Upper main line installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Pilot line installation - proportional control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 Harness installation - Proportional control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20 Control lever installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23 Tank indicator sensor installation (filter clog warning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27 Port relief valve installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28 Installation of nameplate inside cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29

EN

EN

1 - KIT CONTENT

1 - KIT CONTENT Kit content NOTE: please refer to the Parts Manual for parts orders.

Control lever (right-hand) (Refer to 3-23) Item 75

Description Knob (right-hand) proportional control

Quantity 1

Part Reference KHJ28550

Quantity 1 1 2 4 2 1 1 6 6 2 2 1 1 6 1 1 2 4 1 1 2 4 1 1 2 1 1 1 2 1 1 1

Part Reference KBJ19770 KHJ0914 KRJ2682 108R010Y030R KHJ1349 KHJ10410 KRJ11470 105R012Y030R KHJ1361 KSJ13741 KHJ1349 KHJ10420 KRJ16050 105R012Y030R KRJ36930 KHJ0914 KRJ2682 108R010Y030R KBJ19820 KRJ10800 KRJ11450 105R010Y025R KHJ26310 KHJ1804 KHJ1360 KBJ19810 KHJ10480 KRJ11540 KHJ0351 KRJ37590 KHJ24380 KNJ0606

Quantity 1 2 1 2 1 2 1

Part Reference MFJ71500 105R008Y016R KHJ28770 105R010Y020R KNJ0758 KAJ3807 CNA0584 KBJ24030 KHJ2581

Multi-purpose main circuit (Refer to 3-5) Item 4 5 6 7 8 10 11 12 13 14 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 33 34 35 36 37 38

Description Hydraulic hose O-ring Split flange G1 Hexagon socket head bolt M10x30 Hose adapter Shut-off valve Bracket Sems bolt M12x30 O-ring Hydraulic hose Hose adapter Three-direction valve Bracket Sems bolt M12x30 Hydraulic hose O-ring Split flange G1 Hexagon socket head bolt M10x30 Bracket Plate Hose clamp Sems bolt M10x25 Stud Elbow G3/4 O-ring Hydraulic hose Check valve Hydraulic hose Elbow G3/4 Hydraulic hose Long elbow Hose adapter G1

Multi-purpose pilot circuit, proportional control (Refer to 3-10) Item 43 44 45 46 47 48 49 50 50–1

Description Reducing valve Sems bolt M8x16 Bracket Sems bolt M10x20 Hose adapter G1/4 Tee G1/4 Nipple with filter G1/4 Assembly hose ( 50–1 to 50–4) Nylon hose Y1

1 1-1

EN

1 - KIT CONTENT

Item 50–2 50–3 50–4 51 52 53 54 55 56 57 58 59 59–1 59–2 59–3 60 61 61–1 61–2 62 62–1 63 64 65 66 67 68 69 70 71 75* 77 78 79 80

Description

Quantity 1 1 1 1 1 1 2 2 2 2 1

1 2 2 2 1 1 3 8 2 8 1 4 4 4 1

Part Reference KHJ2581 KHJ2163 KHJ31500 KHH0142 KHJ30520 KRJ3557 105R010Y020R 102R006Y012R 183-106VR KHJ0869 KNJ0758 KBJ23940 KHJ33280 KHJ2089 KHJ2195 KHJ28880 KRJ37040 KHJ33820 KHJ33840 KRJ37600 KHJ33320 KHJ0869 KHJ28580 KHJ28580 KHR2584 KHJ1215 KHR10220 KHH0142 KHR26940 KHH0143 KNJ0758 KHR0319 145N006S008R KHH0142 KHJ28630

Description

Quantity 1 3 3

Part Reference KHR39501 KHH0142 KHR1957 KHR1253

Description

Quantity 2

Part Reference BRP0110

Description

Quantity 1 1 1 2

Part Reference KHJ12530 KHR32870 KHR33420 KHR10220

Nylon hose Y2 Nylon hose YP5 Nylon hose YT5 Wire band (L = 250) Bracket Solenoid valve Sems bolt M10x20 High-strength bolt M6x12 Spring washer M6 Tee G1/4 Hose adapter G1/4 Assembly hose ( 59–1 to 59–3) Nylon hose Y4 Nylon hose P5 Nylon hose T5 Elbow Assembly hose ( 61–1 to 61–2) Nylon hose Y4 Nylon hose D11 Assembly hose ( 62–1) Nylon hose D12 Tee G1/4 Elbow G1/4 Elbow Clamp with band M8 Special bolt M8x25 Mount clamp Wire band (L = 250) Pressure sensor Wire band (L = 300) Hose adapter G1/4 Mount clamp Phillips pan head screw M6x8 Wire band (L = 250) Elbow

1 1 1 2 1 1

* The hose adapter (code 75) is not used.

Electrical part (Refer to 3-20) Item 96 97 98 99

Wire harness Wire band (L = 250) Clip Bolt M6x16

Port Relief Valve (Refer to 3-28) Item 59

Port relief valve

Indicator (Refer to 3-27) Item 64 65 66 67

Tee G1/4 x G3/8 Pressure sensor G1/4 Sensor wire harness Mount clamp

1-2 EN

1 - KIT CONTENT

Item 68 69 70

Description

Quantity 2 1 1

Part Reference KHH0142 KHR1317 KHJ1213

Quantity 1

Part Reference KHP27030

Description

Quantity 8 4 4 2

Part Reference KHV10610 KHV10630 105R012Y030R KHV10640

Description Line assembly (left-hand) Line assembly (left-hand) O-ring Plug G3/4 Line assembly (right-hand) Line assembly (right-hand)

Quantity 1 1 2 2 1 1

Part Reference KRV32661 KRV40160 KHJ1361 BRJ1286 KRV32671 KRV40170

Quantity 2 2

Part Reference KHJ1899 KHJ1361

Wire band (L = 250) Clip Special bolt M8x16

Plate (Refer to 3-29) Item 72

Description Operation label (proportional control)

Clamp (Refer to 3-1) Item 86 87 88 89

Pipe clamp Pipe clamp Sems bolt M12x30 Pipe clamp

Line (Refer to 3-1) Item 91 92 93 94 95 96

Plug (Refer to 3-1) Item 100 101

Description Plug O-ring

1-3 EN

1 - KIT CONTENT

1-4 EN

2 - PRE-ASSEMBLY

2 - PRE-ASSEMBLY PREPARING FOR ASSEMBLY

Preparation An “*” in this document indicates that the part is mounted on the actual machine.

Items to prepare: • Wrenches ( 13 mm, 17 mm, 19 mm, 36 mm, 41 mm, 46 mm, 50 mm) • Hexagon wrenches ( 8 mm, 12 mm) • Phillips screwdriver (No. 3) • Cutters, scissors • Rag 1. Position the main unit.

• Put the main unit on solid, level ground, put the bucket cylinder at its open stroke end, the arm cylinder at its open stroke end, lower the boom, and touch the arm top to the ground.

SMIL13II00106AA

1

SMIL13II00107AA

2

2. Switch the ignition key (a) “OFF”, check that the engine has stopped, and then switch the ignition key “ON” again. (Do not start the engine.)

2-1 EN

2 - PRE-ASSEMBLY

3. Bleed out the pressure inside the circuit.

• Flip the lever (c) forward, and then turn the upper operation lever (b) about 10 times to bleed out the pressure.

• Move the travel lever (d) back and forth about 5 times to bleed out the pressure.

SMIL13II00108BA

3

SMIL13II00109AA

4

4. Bleed out the pressure from inside the hydraulic tank.

• Press the air breather button (e) on top of the hydraulic tank to release the pressure inside the tank.

2-2 EN

3 - ASSEMBLY

3 - ASSEMBLY MULTI-PURPOSE CIRCUIT PROPORTIONAL CONTROL KIT

Boom line installation

SMIL15CEX2829GB

1

3-1 EN

3 - ASSEMBLY

Line assemblies (91) and (95) 1. Set the line assembly (left) (91) on the boom.

SMIL15CEX2830AB

2

SMIL15CEX2468AB

3

SMIL15CEX2469AB

4

2. Sandwich the line assembly (left) (91) at two locations with two pipe clamps (86) each, and then fasten with two sems bolts (*1) each.

• Fasten one pipe clamp (86) at a position 250 mm (9.8 in) from the rear end of the line assembly (left) (91).

3. Install the plug (94) on the line assembly (left) (91).

3-2 EN

3 - ASSEMBLY

4. Sandwich the line assembly (left) (91) with two pipe clamps (87), and then fasten with two sems bolts (*2).

• Fasten the pipe clamp (87) at a position 285.0 mm (11.2 in) from the front end of the line assembly (left) (91).

5. Install the line assembly (right) (95) in the same way as the line assembly (left) (91).

SMIL15CEX2470BB

5

SMIL15CEX2831BB

6

Line assemblies (92) and (96) 1. Set the line assembly (left) (92).

3-3 EN

3 - ASSEMBLY

2. Fasten the line assembly (left) (92) with the one pipe clamp (89) and the two sems bolts (88).

• Fasten the pipe clamp (89) at a position 110 mm (4.3 in) from the front end of the line assembly (left) (92).

SMIL15CEX2472AB

7

SMIL15CEX2473AB

8

SMIL15CEX2474AB

9

3. Set the O-ring (93) on the rear end of the line assembly (left) (92), and then connect the line assembly (left) (91).

4. Set the O-ring (101) on the front end of the line assembly (left) (92), and then install the plug (100).

5. Install the line assembly (right) (95) in the same way as the line assembly (left) (91).

3-4 EN

3 - ASSEMBLY

Upper main line installation

SMIL15CEX2554FB

1

Upper main line installation (left side) 1. Install the bracket (11) on the frame with four sems bolts (12).

Install the shut-off valve (10) on the bracket (11) with two sems bolts (12).

• Adjust the set pressure for the relief valve (*1) of the shut-off valve (10) to match the type of attachment used.

Install the hose adapter (8) on the shutoff valve (10) B port.

Set the O-ring (13) on the hose adapter (8) and connect the hydraulic hose (14).

• Hydraulic hose tightening torque: 184 - 226 N·m (136 - 167 lb ft).

SMIL15CEX2555AB

2

3-5 EN

3 - ASSEMBLY

2. Set the O-ring (13) on the line assembly (left) (*2) and connect the hydraulic hose (14).

• Hydraulic hose tightening torque: 184 - 226 N·m (136 - 167 lb ft).

SMIL15CEX2556AB

3

SMIL15CEX2845AB

4

SMIL15CEX2846AB

5

SMIL15CEX2559AB

6

3. Install the hose adapter (8) on the shutoff valve (10) A port.

Set the O-ring (13) on the hose adapter (8) and connect the hydraulic hose (20).

• Hydraulic hose tightening torque: 184 - 226 N·m (136 - 167 lb ft).

4. Set the O-ring (5) on the control valve (*4) A2 port, and install the hydraulic hose (20) with two split flanges (6) and four hexagon socket head bolts (7).

Upper main line installation (right side) 1. Install the bracket (18) on the frame with four sems bolts (19).

3-6 EN

3 - ASSEMBLY

2. Install the three-direction valve (17) on the bracket (18) with two sems bolts (19).

Install the hose adapter (15) on the three-direction valve (17) A port.

Set the O-ring (13) on the hose adapter (15) and connect the hydraulic hose (14).

• Hydraulic hose tightening torque: 184 - 226 N·m (136 - 167 lb ft).

SMIL15CEX2560AB

7

SMIL15CEX2561AB

8

SMIL15CEX2562AB

9

3. Set the O-ring (13) on the line assembly (right) (*4) and connect the hydraulic hose (14).

• Hydraulic hose tightening torque: 184 - 226 N·m (136 - 167 lb ft).

4. Install the hose adapter (38) on the three-direction valve (17) T1 port.

Connect the hydraulic hose (36) to the hose adapter (38).

5. Install the long elbow (37) on the hydraulic tank (*5).

• Fasten the elbow (37) with the horizontal angle of about 20 ° up.

Connect the hydraulic hose (36) to the long elbow (37).

DEF56990

10

3-7 EN

3 - ASSEMBLY

6. Install the hose adapter (15) on the three-direction valve (17) B port.

Set the O-ring (13) on the hose adapter (15) and connect the hydraulic hose (4).

• Hydraulic hose tightening torque: 184 - 226 N·m (136 - 167 lb ft).

SMIL15CEX2847AB

11

SMIL15CEX2848AB

12

SMIL15CEX2849AB

13

7. Install the bracket (24) on the housing frame (*6) with two sems bolts (27).

Sandwich the hydraulic hose (4) with two hose clamps (26), and then install the plate (25) with two sems bolts (27) in order to fasten the clamps.

8. Set the O-ring (21) on the control valve (*3) B2 port, and install the hydraulic hose (4) with two split flanges (22) and four hexagon socket head bolts (23).

3-8 EN

3 - ASSEMBLY

9. Install the check valve (33) on the control valve (*3) P4 port.

Set the O-ring (30) on the check valve (33) and connect the hydraulic hose (31).

Install the stud (28) on the control valve (*3) P3 port, and then install the elbow (29).

Set the O-ring (30) on the elbow (29) and connect the hydraulic hose (31).

• Hydraulic hose tightening torque: 157 - 193 N·m (116 - 142 lb ft).

SMIL15CEX0817AB

14

SMIL15CEX0818AB

15

10. Install the elbow (35) on the shutoff valve (10) T port.

Install the elbow (35) on the three- direction valve (17) T2 port.

Connect the shut-off valve (10) T port and three-direction valve (17) T2 port with the hydraulic hose (34).

3-9 EN

3 - ASSEMBLY

Pilot line installation - proportional control

SMIL15CEX0819FB

1

SMIL15CEX0820FB

2

3-10 EN

3 - ASSEMBLY

3

20FAE480

*1. *2. *3.

Floor Manifold Control valve

*4. Hydraulic tank *10. Shut-off valve *17. Three-direction valve

1. Install the reducing valve (43) on the bracket (45) with two sems bolts (44).

Install the bracket (45) on the floor (*1) with two sems bolts (46).

SMIL15CEX0822AB

4

3-11 EN

3 - ASSEMBLY

2. Install the solenoid valve (53) on the bracket (52) with two spring washers (56) and two high-strength bolts (55).

Install the bracket (52) on the floor (*1) with two sems bolts (54).

SMIL15CEX0823BB

5

4A054111

6

4C767327

7

3. Install the hose adapter (47) on the reducing valve (43) T port.

• Tightening torque: 25.4 - 31.4 N·m (18.7 - 23.2 lb ft)

4. Install the tee (57) on the solenoid valve (53) T port.

Connect the reducing valve (43) T port and solenoid valve (53) T port with the nylon hose (50–4).

3-12 EN

3 - ASSEMBLY

5. Install the nipple with filter (49) on the reducing valve (43) P port.

• Tightening torque: 25.4 - 31.4 N·m (18.7 - 23.2 lb ft)

64DE8ABE

8

662B9FFD

9

6. Install the tee (57) on the solenoid valve (53) P port.

Connect the reducing valve (43) P port and solenoid valve (53) P port with the nylon hose (50–3).

Fasten the nylon hoses (50–3) and (50–4) with the special band (51).

3-13 EN

3 - ASSEMBLY

7. Install the tee (48) on the reducing valve (43) A1 port.

• Tightening torque: 25.4 - 31.4 N·m (18.7 - 23.2 lb ft)

60E6C9EA

10

88E071F1

11

8. Install the elbow (60) on the control valve (*3) pb2 port.

Connect the reducing valve (43) A1 port and control valve (*3) pb2 port with the nylon hose (50–2).

3-14 EN

3 - ASSEMBLY

9. Install the tee (48) on the reducing valve (43) A2 port.

• Tightening torque: 25.4 - 31.4 N·m (18.7 - 23.2 lb ft)

62112BA4

12

93EDD5F3

13

A699A603

14

10. Install the elbow (60) on the control valve (*3) pa2 port.

Connect the reducing valve (43) A2 port and control valve (*3) pa2 port with the assembly hose (50) (Y1).

11. Install the elbow (64) on the manifold (*2) T5 port.

Connect the solenoid valve (53) T port and manifold (*2) T5 port with the nylon hose (59–3).

3-15 EN

3 - ASSEMBLY

12. Install the elbow (64) on the manifold (*2) P5 port.

Connect the solenoid valve (53) P port and manifold (*2) P5 port with the nylon hose (59–2).

ADFAFFD3

15

D198133D

16

13. Install the hose adapter (58) on the solenoid valve (53) A port.

3-16 EN

3 - ASSEMBLY

14. Install the tee (63) on the shut-off valve (*10) PP port.

Connect the solenoid valve (53) A port and the shut-off valve (*10) PP port with the nylon hose (59–1).

662D9108

17

ECCFB3BA

18

949D2315

19

15. Fasten the nylon hose (59–1) with the clamp with band (66) and special bolt (67).

• Tightening torque: 23.5 - 35.3 N·m (17.3 - 26.0 lb ft) Fasten the nylon hose (59–1) at three locations with the mount clamp (68) and wire band (69).

16. Install the elbow (65) on the three-direction valve (*17) PP port.

Connect the shut-off valve (*10) PP port and three-direction valve (*17) PP port with the nylon hose (61–1).

3-17 EN

3 - ASSEMBLY

17. Install the elbow (65) on the shut-off valve (*10) DR port.

A2ED9A37

20

A61C0502

21

BF89D35C

22

18. Install the tee (63) on the three-direction valve (*17) DR port.

• Fasten the tee (63) with the horizontal angle of about 30 ° down from the valve.

Connect the nylon hose (61–2) to the shut-off valve (*10) DR port and three- direction valve (*17) DR port, and then fasten with two wire bands (69)

19. Install the elbow (80) on the hydraulic tank (*4).

Connect the three-direction valve (*17) DR port and hydraulic tank (*4) with the nylon hose (62–1).

Fasten the nylon hose (62–1) at two locations with the wire bands (69).

3-18 EN

3 - ASSEMBLY

20. Fasten the nylon hose with four mount clamps (77), four Phillips pan head screws (78), and four wire bands (79).

• Fasten the nylon hose with four wire bands (71).

Fasten the assembly hose together with the pilot control line.

Install the two pressure sensors (70) on the reducing valve (43).

SMIL15CEX2572BB

23

SMIL15CEX2854AB

24

21. Fasten the assembly hose with four wire bands (71).

3-19 EN

3 - ASSEMBLY

Harness installation - Proportional control

SMIL15CEX2573FB

1

SMIL15CEX2574FB

2

3-20 EN

3 - ASSEMBLY

1. Connect the wire harness (96) and the reducing valve (*1).

SMIL15CEX2575AB

3

SMIL15CEX2576BB

4

SMIL15CEX2577AB

5

2. Route the wire harness (96) as shown in the diagram.

Fasten the wire harness (96) at six locations with six wire bands (97).

3. Connect the wire harness (96) and solenoid valve (*2) as shown in the diagram.

Fasten the three couplers on the wire harness (96) with one clip (98) each and one bolt (99) each.

3-21 EN

3 - ASSEMBLY

4. Connect the wire harness (96) connector (8-pin) to the frame main harness (*3) and fasten with the wire band (97).

SMIL15CEX2578AB

6

SMIL15CEX2579AB

7

5. Extend the wire harness (96) to the floor side from under the cab.

Connect the wire harness (96) connector (16-pin) to the cab main harness and fasten with the wire band (97).

3-22 EN

3 - ASSEMBLY

Control lever installation Removal of control lever (right) 1. Roll up the boot (*1) of the control lever and use the Phillips screwdriver or box wrench 10 mm to remove the 2 bolts (*2) of the console top cover.

SMIL14II00167AB

1

SMIL14II00168AB

2

SMIL14II00169AB

3

SMIL14II00170AB

4

2. Use the Phillips screwdriver to remove the 2 screws (*3), and then remove the handle of the tilt lever (*4).

3. Use the Phillips screwdriver to remove the 2 screws (*5) of the console top cover.

4. Remove the connectors (*6) and remove the console top cover (*7).

3-23 EN

3 - ASSEMBLY

5. Use a Phillips screwdriver or box wrench 10 mm to remove the 5 bolts (*8) and remove the cover (*9).

SMIL14II00175AB

5

SMIL14II00171AB

6

SMIL14II00172AB

7

7A989A23

8

6. Roll up the boot (*10) of the control lever, remove the connector (*11) of the lever switch, and cut the wire band (*12).

7. While fastening the nut (*13) with a wrench 22 mm, use a wrench 19 mm to remove the lock nut (*14) and remove the control lever (*15).

Installation of control lever (right) 1. After installing the knob (right) (75), while fastening the nut (*13) with a wrench 22 mm, use a wrench 19 mm to install the lock nut (*14).

Lock nut tightening torque: 38.3 - 44.1 N·m (28.25 32.53 lb ft)

3-24 EN

3 - ASSEMBLY

2. Install the horn switch connector (*11), bundle with the wire band (*12), and then cover the control lever boot (*10).

SMIL14II00174AB

9

3. Use a Phillips screwdriver or box wrench 10 mm to install the cover (*9) with 5 bolts (*8).

SMIL14II00175AB

10

SMIL14II00176AB

11

SMIL14II00177AB

12

4. Install the connectors (*6) and install the console top cover (*7).

5. Use the Phillips screwdriver to install the 2 screws (*5) of the console top cover.

3-25 EN

3 - ASSEMBLY

6. Use the Phillips screwdriver to install the handle of the tilt lever (*4) with 2 screws (*3).

SMIL14II00178AB

13

SMIL14II00179AB

14

7. Use the Phillips screwdriver or box wrench 10 mm to install the 2 bolts (*2) for the console top cover and cover the control lever boot (*1).

3-26 EN

3 - ASSEMBLY

Tank indicator sensor installation (filter clog warning)

SMIL15CEX3045FB

1

1. Remove the elbow and pilot P and T lines from the hydraulic tank (*1) manifold, and then install the tee (64).

2. Install the pressure sensor (65) on the tee (64).

Connect the sensor wire harness (66) to the pressure sensor (65).

SMIL15CEX2527AB

2

SMIL15CEX2528AB

3

3. Connect the sensor wire harness (66) to the frame main wire harness (*4).

Fasten the sensor wire harness (66) with the special bolt (70) and the clip (69).

3-27 EN

3 - ASSEMBLY

Port relief valve installation 1. Remove the plug, and then install the 2 port relief valves (59) on the control valve (*1).

• Tightening torque: 78.4 - 88.3 N·m (57.8 - 65.1 lb ft) After installing the port relief valve (59), adjust the relief pressure to match the attachment used. (See the Service Manual.)

SMIL14CEX5912BB

1

3-28 EN

3 - ASSEMBLY

Installation of nameplate inside cab

SMIL15CEX3044GB

1

1. Wipe off any dirt from the location where the label will be attached.

2. Attach the operation label (proportional control) (72).

3-29 EN

3 - ASSEMBLY

3-30 EN

Index ###_Index_###

B Boom line installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-1

C Control lever installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23 H Harness installation - Proportional control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20 I Installation of nameplate inside cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29 K Kit content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1

P Pilot line installation - proportional control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 Port relief valve installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 T Tank indicator sensor installation (filter clog warning) . . . . . . . . . . . . . . . . . . . . . . . . . 3-27 U Upper main line installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-5

EN

SERVICE - Technical Publications & Tools

© 2016 CNH Industrial Italia S.p.A. All rights reserved. No part of the text or illustrations of this publication may be reproduced.

CNH policy is one of continuous improvement and the right to change prices, specification or equipment at any time without notices is reserved.

All data given in this publication is subject to production variations. Dimensions and weight are approximate only and the illustrations do not necessarily show products in standard condition. For exact information about any particular product, please consult your CNH Dealer.

CNH Industrial Italia S.p.A. viale delle Nazioni, 55 Modena Italy 41122 EN