Class Balers QUADRANT 5300, 5200, 4200 EN Tranining Document Manual - PDF DOWNLOAD

CLAAS ACADEMY | Changes to 2017/2018 production machines

Changes to 2017/2018 production QUADRANT Machines

ath-qua-up-dp-01_12_17_en

CLAAS ACADEMY | Changes to 2017/2018 production machines

Contents NAME: COMPANY: DATE:

02 – Gearbox / clutch / universal drive shaft 03 – Chassis 04 – Brake 05 – Steering 07 – Coupling device 08 – Drive

09 – Hydraulics 10 – Electrical / electronic equipment 20 – Crop feeding 21 – Feeder unit 45 – Baling system 46 – Tying system 60 – Crop / straw discharge 75 – Central lubrication Note:

80 – Attachment parts / machine body

This documentation explains the functions of the machine according to the specifications for technical training. The information is therefore not complete in terms of working on the machine. This document does not replace the relevant service and repair documentation. Subject to changes due to continuing technical developments. Country-specific equipment may vary from that given in the training document.

ath-qua-up-dp-01_12_17_en

1

CLAAS ACADEMY | Changes to 2017/2018 production machines 02_Gearbox > 30_Mechanical Gearbox

QUADRANT 5200

Main Gearbox

1

New main gearbox (1) Reinforced packer drive bearing

ath-qua-up-dp-01_12_17_en

2

CLAAS ACADEMY | Changes to 2017/2018 production machines 02_Gearbox > 30_Mechanical Gearbox

QUADRANT 5200

Feed Rake Gearbox

1

New feed rake gearbox (1) Reinforced rotor drive bearing New oil feeling design Change over syntetic oil

ath-qua-up-dp-01_12_17_en

3

CLAAS ACADEMY | Changes to 2017/2018 production machines 20_Cropfeeding > 20_Pickup

QUADRANT 4200/5200/5300

New PFS Auger Design

New PFS auger

New PFS auger to avoid the material wrapping around the auger and to improve the crop flow in small swath conditions

ath-qua-up-dp-01_12_17_en

4

CLAAS ACADEMY | Changes to 2017/2018 production machines 20_Cropfeeding > 20_Pickup

QUADRANT 4200/5200/5300

Hydraulic Pick-Up Improvement

Pick-up load indicator + crop press rollers relief system ( available only with hydraulic pick-up ) to improve the PU capacity A feedback of the pick-up load is displayed on the terminal A warning signal is also displayed on the terminal before and during a pick-up overload

ath-qua-up-dp-01_12_17_en

5

CLAAS ACADEMY | Changes to 2017/2018 production machines 20_Cropfeeding > 20_Pickup

QUADRANT 4200/5200/5300

Pick-Up Reliability Improvement

2 3 1

New teflon tine bar bearing (1) New spring pin size (2) 8x55 New bearing protection (3)

ath-qua-up-dp-01_12_17_en

6

CLAAS ACADEMY | Changes to 2017/2018 production machines 20_Gutaufnahme > 20_Pickup

QUADRANT 4200/5200/5300

Pick-Up Reliability Improvement

1 2

New reinforcement plate of the pick-up fixation shaft for RF machines (1) New reinforced pick-up hydraulic cylinder shaft for RF/RC/FC machines (2)

ath-qua-up-dp-01_12_17_en

7

CLAAS ACADEMY | Changes to 2017/2018 production machines 45_Baling System > 05_Bale Chamber

QUADRANT 4200/5200/5300

Bale Chamber Improvement

New scraper edge (1)

Avoid the material accumulation between the plunger and the side wall

1

ath-qua-up-dp-01_12_17_en

8

CLAAS ACADEMY | Changes to 2017/2018 production machines 45_Baling System > 05_Bale Chamber

QUADRANT 5200

Bale Chamber Improvement

Additional hydraulic cylinder on the top plate

Retrofit kit number 1351.075.0 to machine J3100219 kit number 1351.231.0 from machine J3100220

ath-qua-up-dp-01_12_17_en

9

CLAAS ACADEMY | Changes to 2017/2018 production machines 45_Baling System > 10_Baling Ram

QUADRANT 4200/5200/5300

Plunger Improvement

1 2

New Plunger scraper (1)

Retrofit kit scraper (1) + edge (2) Kit number 1351.369.0 > QUADRANT 4200 Kit number 1351.370.0 > QUADRANT 5200 Retrofit kit scraper (1) + edge (2) + inspection window (3) Part number 1339.151.0 > QUADRANT 3300 / 5300

ath-qua-up-dp-01_12_17_en

3

10

CLAAS ACADEMY | Changes to 2017/2018 production machines 60_Crop Discharge > 40_Bale Discharge

QUADRANT 4200/5200

Bale Ejector Improvement

1

New bale ejector design (1)

Avoid the material accumulation in the bale ejector frame

ath-qua-up-dp-01_12_17_en

11

CLAAS ACADEMY | Changes to 2017/2018 production machines 60_Crop Discharge > 40_Bale Discharge

QUADRANT 4200/5200/5300

Weighing system G04 0360

New optional weighing system Weight per bale and total weight per customer Retrofit kit for QUADRANT 4200/5200/5300

ath-qua-up-dp-01_12_17_en

12

CLAAS ACADEMY | Changes to 2017/2018 production machines 75_Central Lubrification System

QUADRANT 4200

New Additional Automatic Greasing Points

Additional automatic greasing points on the feed rake ball joint and on the turbofan bearings Increased greasing time to 17min just via CDS (Need to be configured) Improved grease distribution on the knotters

ath-qua-up-dp-01_12_17_en

13

CLAAS ACADEMY | Changes to 2017/2018 production machines 75_Central Lubrification System

QUADRANT 5200

New Additional Automatic Greasing Points

Additional automatic greasing points on the feed rake ball joint / the turbofan bearings / the feed rake braking ram ball joints and the feed rake control lever ball joint Increased greasing time to 17 min via CDS Improved grease distribution on the knotters

ath-qua-up-dp-01_12_17_en

14

CLAAS ACADEMY | Changes to 2017/2018 production machines 75_Central Lubrification System

QUADRANT 5300

New Additional Automatic Greasing Points

Additional automatic greasing points on the feed rake ball joint / the turbofan bearings / the needle pull rods and the needle yoke bushing Increased greasing time to 17 min via CDS Improved grease distribution on the knotters

ath-qua-up-dp-01_12_17_en

15

CLAAS ACADEMY | Changes to 2017/2018 production machines 5200/5300

Hydraulic Oil Tank

1

3

2

New sight glass (1) with integrated oil level sensor (2) resulting in removal of oil level sensor (3)

ath-qua-up-dp-01_12_17_en

16

CLAAS ACADEMY | Changes to 2017/2018 production machines 4200/5200/5300

New Software TYPE

Old version

New version

Changes

 New mask #5

J30 QDT 4200 J31 QDT 5200 J32 QDT 5300

CCU16+ v1.32

CCU16+

v1.41

 APC / Display of DTC B536 Improvement of the baling pressure regulation due to a new software algorithm

UBM2

UBM2

v1.50

 APC / Overload Improvement of the pressure drop during an overload due to a new software algorithm

v1.40

 APC / Density Setting Adding the possibility to set the density parameter from 5 to 100 on the terminal with a step of 5  KCS Improvement of the broken twine detection system due to a new software algorithm  ISOBUS / Connection between tractor and baler Adding of a timer in the software before a solenoid activation when the customer start the tractor The issue of unability to start the tractor engine is now solved  TONI Adding the possibility to read the bale weight on the TONI backend

ath-qua-up-dp-01_12_17_en

17

CLAAS ACADEMY | Changes to 2017/2018 production machines

Notiz

ath-qua-up-dp-01_12_17_en

18