6.6 Maintenance/Lubrication Chart / Grease Spec

SECTION 6 – MAINTENANCE/LUBRICATION

6.6 LUBRICATION/MAINTENANCE CHART

Read Maintenance/Lubrication Section for proper procedures. Use this chart as a quick reference only.

** Check first 10 hours of operation, and then at regular chart intervals. *** Up to Machine No. 432 40000 only

GREASE SPEC: Use SAE Multi-Purpose Grease per the following: All locations except Driveline slip joints – High Temp. Extreme Pressure (EP2) Performance With 1% Max Molybdenum Disulphide (NLGI Grade 2). Lithium Base Driveline slip joints – High Temp. Extreme Pressure (EP) Performance With 10% Max Molybdenum Disulphide (NLGI Grade 2). Lithium Base

Frequency In Hours

Service to Perform Grease Lubricate Check Clean Change

1 Drive Shaft Splines 100 100 2 Drive Shaft (Points A1, A3, A5) 50 3 Drive Shaft Clutch 50 4 Drive Chain & Sprocket ** 50 50 5 Rear Carrier Bracket 10 6 Six Small Gear Boxes 100 7 Main Gear Box 100 8 Belt Tension Idler Arm 50 9 Tire Pressure ** 100 10 Loose Fasteners 10 11 Hose Leaks 10 12 Wheel Bolts 100 13 Drive Chain Tension ** 50 14 Draper Belt Tension ** 50 15 Idler Rotor Bolt 50 16 Drive Rotor Bolt 50 17 Bearing Damage 100 18 Teeth Wear 100 19 Gear Box Wear 100 20 Worn Paint Spots 100 21 Cleaning of Units 100 22 Wear Inspection 100 23 Drive Shaft (Points A2, A4) 10 24 Oil filter element (Mega) 100 25 Hydraulic power pack oil (Mega) 10 26 Hold Down Arms - Front *** 50 27 Hold Down Arms - Rear *** 50

GEAR LUBE: Mobilux EP 023 HYDRAULIC POWER PACK OIL: Claas Select Agrihyd HVLP-D (ISO VG 46)

35