CLAAS Part2 General Information Maintenance Operators Manual - PDF DOWNLOAD

OPERATOR1S MANUAL

Part2 肪'lleral

Information, Maintenance

CLAASMARKANT65/55/52

Foreword

This Part 2 of the Operator's Manual covers General Information and Maintenance. The book should be regarded as complementary of the Part 1 of the Operator's Manual, covering Operation, Specifications, Lubrication and provides practical information concerning the efficient use of your CLAAS-High Density Baler. Carefully read this manual to obtain best resuits from your baler.

Follow the various hints given in this booklet regarding the correct maintenance and operation of the machine. Neglect in maintenance or faulty adjustments of the machine will result in inefficiency and loss of valuable time. It is therefore recommended, that an authorized CLAAS-Dealer carries out the regular maintenance operations, to ensure that your CLAAS-High Density Baler will fuction for many years and always be ready for immediate use.

CLAAS Service Department

IMPORTANT The instructions contained in t-his manual should be carefully read and observed by all persons who are concerned with the operation, maintenance and inspection of this machine, in order to prevent accidents.

Especially the SAFETY RULES and the group PRIOR TO OPERATION in this manual should be read with the utmost care and adhered to.

The use of spare parts, accessories and ancillary equipment, which are not originally manufactured by CLAAS, can change the specified design characteristics of the CLAAS machine or can detract from its functional performance, with a possible adverse affect on the active and/or passive operational safety of the machine and its occupational safety standards (accident prevention).

CLAAS are in no way liable for any damage or personal injury caused through the use of other than original or approved CLAAS parts, accessories and ancillary equipment.

Contents

General Information Safetyfeatures................

Baler....................

D.rive mechanism..............

Kno廿ershaft................

7 7 7 7 7 7 7 7 8

Knotter...................

Needles..................

Feeders..................

Pick-up................... ectional view of baler.

Secti .....

Description of baler....... .....

9 Considerations before baling..........

9 Baler hook-up... . . . 10 Universal drive shaft.. . . . . 10 Long drawbar with double universal drive shaft.. . . . . . . . . . 11 Wide angle universal drive shaft...... 11 Pick-up... . . . . 12 Pick-up drive..... . . . 12 Feeders.. . . . . 12 Feeder setting... . . . 12 Feedertiming.. . . . . 12 Bale chamber and r a m . . . . . . . . . . . . 13 Ram knife adjustment........... 13 Ramstop.. . . . . 13 Dimpled side plates. . . . 13 Baler setting. . . . . 14 Knotter shaft and needle setting. . . . . 14 Checking the setting of the needles relative to theram... . . . . . 14 Tying mechanism..... . . . . 14 Path of twine... . . . 14 Needle voke brake.. . . . 14 Needle setting. . . . 15 Knotter shaft brake.... . . . 16 Twine finger..... . . . . 16 Knotter.. . . . . . 16 Adjusting the twine tensioner.. . . . . . 17 Maintenance Tying mechanism.. ...

Chains... ....

Angle drive gearbox. ....

Problems and remedy, general........

Problems and remedy, knotter........

Wiinter storage instructions.. ....

20 20 20 21 22 24