6 Before putting the machine into operation 6.1 Tasks to be performed 82028
6 Before putting the machine into operation 6.1 Tasks to be performed Danger! Work on the front attachment and/or the machine must normally only be carried out with the drive OFF and diesel engine OFF. – Diesel engine OFF. – Remove the ignition key. – Remove the key of the battery isolating switch. – Carry out maintenance work. – see page 83, Maintenance schedule – Check the safety bar for wear and damage. – Fully assemble and fit safety devices and lock them in place. – Before driving off, check that the vehicle is not carrying any loose parts. Parts that may get lost while driving must be fastened or covered up. – Do not allow any persons in the hazard area. When persons approach the hazard area, stop the machine immediately. – Never let the machine run while unattended. – Engage front attachment only in the working position and at idle speed. – see page 77, Switching on the front attachment – Prepare the front attachment for field operation. – see page 68, Using the wood cutter
54
00 0291 310 0 - BA HS-2 - 03/05
