Remove the rear wheels 5

SAFETY

Identification

For the location of the structure identification plates: – Type series N°. – Certification N°. – ID N° of the safety structure, refer to the user manual, chapter (A)

Important: A safety structure damaged (distorted) as the result of an accident, must never be repaired but must be replaced

Recommendations before raising

Important: lRaise the cab only with a spreader bar to avoid any risk of deformation to the lifting points.

– Cab weight: About 750 kg Spreader bar reference nr 7701388907 . Lifting kit reference 7711132317

Safety measure

To raise the cab, always use a hoist in perfect working order, with a sufficient hook height to enable the cab to be lifted clear. If the cab is partly lifted, it must be propped up. – Position the tractor on flat and level ground – If the tractor is equipped with a suspended axle, put it in the low position – Chock the wheels. – Place warnings around the working area. – Use a certified hoist in perfect working order. – Use certified shackles. – Use certified slings in perfect working order – Respect safety instructions. Wear protective gloves and shoes

Forbidden Use spreader bar only

841hsm03 Fig. 1