System Identification Errors

System Identification Errors The error messages in this section appear on startup if incorrect or invalid components are used with the 700 to 1500 terminals.

TIP Terminals manufactured after January 2007 switch displays without displaying the following error messages.

• This dialog appears if a PanelView Plus CE logic module is attached to a PanelView display module. We recommend that you use a PanelView Plus CE display module with a PanelView

Plus CE logic module. This is a warning letting you continue to operate.

• This dialog appears if the PanelView Plus logic module contains a 2711P-RWx internal CompactFlash card for the PanelView Plus

CE terminal.

After pressing OK, you will be asked to power off the terminal and insert a valid 2711P-RWx internal CompactFlash card for the PanelView Plus terminal.

• This dialog appears if the PanelView Plus CE logic module contains a 2711P-RWx internal CompactFlash card for the

PanelView Plus terminal.

(6189-RWX)

After clicking OK, you will be asked to power off the terminal and insert a valid 2711P-RWx internal CompactFlash card for the PanelView Plus CE terminal.